// SPDX-License-Identifier: GPL-1.0+ /*====================================================================== A PCMCIA ethernet driver for NS8390-based cards This driver supports the D-Link DE-650 and Linksys EthernetCard cards, the newer D-Link and Linksys combo cards, Accton EN2212 cards, the RPTI EP400, and the PreMax PE-200 in non-shared-memory mode, and the IBM Credit Card Adapter, the NE4100, the Thomas Conrad ethernet card, and the Kingston KNE-PCM/x in shared-memory mode. It will also handle the Socket EA card in either mode. Copyright (C) 1999 David A. Hinds -- dahinds@users.sourceforge.net pcnet_cs.c 1.153 2003/11/09 18:53:09 The network driver code is based on Donald Becker's NE2000 code: Written 1992,1993 by Donald Becker. Copyright 1993 United States Government as represented by the Director, National Security Agency. Donald Becker may be reached at becker@scyld.com Based also on Keith Moore's changes to Don Becker's code, for IBM CCAE support. Drivers merged back together, and shared-memory Socket EA support added, by Ken Raeburn, September 1995. ======================================================================*/ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt #include #include #include #include #include #include #include #include #include #include #include "8390.h" #include #include #include #include #include #include #include #define PCNET_CMD 0x00 #define PCNET_DATAPORT 0x10 /* NatSemi-defined port window offset. */ #define PCNET_RESET 0x1f /* Issue a read to reset, a write to clear. */ #define PCNET_MISC 0x18 /* For IBM CCAE and Socket EA cards */ #define PCNET_START_PG 0x40 /* First page of TX buffer */ #define PCNET_STOP_PG 0x80 /* Last page +1 of RX ring */ /* Socket EA cards have a larger packet buffer */ #define SOCKET_START_PG 0x01 #define SOCKET_STOP_PG 0xff #define PCNET_RDC_TIMEOUT (2*HZ/100) /* Max wait in jiffies for Tx RDC */ static const char *if_names[] = { "auto", "10baseT", "10base2"}; /*====================================================================*/ /* Module parameters */ MODULE_AUTHOR("David Hinds "); MODULE_DESCRIPTION("NE2000 compatible PCMCIA ethernet driver"); MODULE_LICENSE("GPL"); #define INT_MODULE_PARM(n, v) static int n = v; module_param(n, int, 0) INT_MODULE_PARM(if_port, 1); /* Transceiver type */ INT_MODULE_PARM(use_big_buf, 1); /* use 64K packet buffer? */ INT_MODULE_PARM(mem_speed, 0); /* shared mem speed, in ns */ INT_MODULE_PARM(delay_output, 0); /* pause after xmit? */ INT_MODULE_PARM(delay_time, 4); /* in usec */ INT_MODULE_PARM(use_shmem, -1); /* use shared memory? */ INT_MODULE_PARM(full_duplex, 0); /* full duplex? */ /* Ugh! Let the user hardwire the hardware address for queer cards */ static int hw_addr[6] = { 0, /* ... */ }; module_param_array(hw_addr, int, NULL, 0); /*====================================================================*/ static void mii_phy_probe(struct net_device *dev); static int pcnet_config(struct pcmcia_device *link); static void pcnet_release(struct pcmcia_device *link); static int pcnet_open(struct net_device *dev); static int pcnet_close(struct net_device *dev); static int ei_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); static irqreturn_t ei_irq_wrapper(int irq, void *dev_id); static void ei_watchdog(struct timer_list *t); static void pcnet_reset_8390(struct net_device *dev); static int set_config(struct net_device *dev, struct ifmap *map); static int setup_shmem_window(struct pcmcia_device *link, int start_pg, int stop_pg, int cm_offset); static int setup_dma_config(struct pcmcia_device *link, int start_pg, int stop_pg); static void pcnet_detach(struct pcmcia_device *p_dev); /*====================================================================*/ struct hw_info { u_int offset; u_char a0, a1, a2; u_int flags; }; #define DELAY_OUTPUT 0x01 #define HAS_MISC_REG 0x02 #define USE_BIG_BUF 0x04 #define HAS_IBM_MISC 0x08 #define IS_DL10019 0x10 #define IS_DL10022 0x20 #define HAS_MII 0x40 #define USE_SHMEM 0x80 /* autodetected */ #define AM79C9XX_HOME_PHY 0x00006B90 /* HomePNA PHY */ #define AM79C9XX_ETH_PHY 0x00006B70 /* 10baseT PHY */ #define MII_PHYID_REV_MASK 0xfffffff0 #define MII_PHYID_REG1 0x02 #define MII_PHYID_REG2 0x03 static struct hw_info hw_info[] = { { /* Accton EN2212 */ 0x0ff0, 0x00, 0x00, 0xe8, DELAY_OUTPUT }, { /* Allied Telesis LA-PCM */ 0x0ff0, 0x00, 0x00, 0xf4, 0 }, { /* APEX MultiCard */ 0x03f4, 0x00, 0x20, 0xe5, 0 }, { /* ASANTE FriendlyNet */ 0x4910, 0x00, 0x00, 0x94, DELAY_OUTPUT | HAS_IBM_MISC }, { /* Danpex EN-6200P2 */ 0x0110, 0x00, 0x40, 0xc7, 0 }, { /* DataTrek NetCard */ 0x0ff0, 0x00, 0x20, 0xe8, 0 }, { /* Dayna CommuniCard E */ 0x0110, 0x00, 0x80, 0x19, 0 }, { /* D-Link DE-650 */ 0x0040, 0x00, 0x80, 0xc8, 0 }, { /* EP-210 Ethernet */ 0x0110, 0x00, 0x40, 0x33, 0 }, { /* EP4000 Ethernet */ 0x01c0, 0x00, 0x00, 0xb4, 0 }, { /* Epson EEN10B */ 0x0ff0, 0x00, 0x00, 0x48, HAS_MISC_REG | HAS_IBM_MISC }, { /* ELECOM Laneed LD-CDWA */ 0xb8, 0x08, 0x00, 0x42, 0 }, { /* Hypertec Ethernet */ 0x01c0, 0x00, 0x40, 0x4c, 0 }, { /* IBM CCAE */ 0x0ff0, 0x08, 0x00, 0x5a, HAS_MISC_REG | HAS_IBM_MISC }, { /* IBM CCAE */ 0x0ff0, 0x00, 0x04, 0xac, HAS_MISC_REG | HAS_IBM_MISC }, { /* IBM CCAE */ 0x0ff0, 0x00, 0x06, 0x29, HAS_MISC_REG | HAS_IBM_MISC }, { /* IBM FME */ 0x0374, 0x08, 0x00, 0x5a, HAS_MISC_REG | HAS_IBM_MISC }, { /* IBM FME */ 0x0374, 0x00, 0x04, 0xac, HAS_MISC_REG | HAS_IBM_MISC }, { /* Kansai KLA-PCM/T */ 0x0ff0, 0x00, 0x60, 0x87, HAS_MISC_REG | HAS_IBM_MISC }, { /* NSC DP83903 */ 0x0374, 0x08, 0x00, 0x17, HAS_MISC_REG | HAS_IBM_MISC }, { /* NSC DP83903 */ 0x0374, 0x00, 0xc0, 0xa8, HAS_MISC_REG | HAS_IBM_MISC }, { /* NSC DP83903 */ 0x0374, 0x00, 0xa0, 0xb0, HAS_MISC_REG | HAS_IBM_MISC }, { /* NSC DP83903 */ 0x0198, 0x00, 0x20, 0xe0, HAS_MISC_REG | HAS_IBM_MISC }, { /* I-O DATA PCLA/T */ 0x0ff0, 0x00, 0xa0, 0xb0, 0 }, { /* Katron PE-520 */ 0x0110, 0x00, 0x40, 0xf6, 0 }, { /* Kingston KNE-PCM/x */ 0x0ff0, 0x00, 0xc0, 0xf0, HAS_MISC_REG | HAS_IBM_MISC }, { /* Kingston KNE-PCM/x */ 0x0ff0, 0xe2, 0x0c, 0x0f, HAS_MISC_REG | HAS_IBM_MISC }, { /* Kingston KNE-PC2 */ 0x0180, 0x00, 0xc0, 0xf0, 0 }, { /* Maxtech PCN2000 */ 0x5000, 0x00, 0x00, 0xe8, 0 }, { /* NDC Instant-Link */ 0x003a, 0x00, 0x80, 0xc6, 0 }, { /* NE2000 Compatible */ 0x0ff0, 0x00, 0xa0, 0x0c, 0 }, { /* Network General Sniffer */ 0x0ff0, 0x00, 0x00, 0x65, HAS_MISC_REG | HAS_IBM_MISC }, { /* Panasonic VEL211 */ 0x0ff0, 0x00, 0x80, 0x45, HAS_MISC_REG | HAS_IBM_MISC }, { /* PreMax PE-200 */ 0x07f0, 0x00, 0x20, 0xe0, 0 }, { /* RPTI EP400 */ 0x0110, 0x00, 0x40, 0x95, 0 }, { /* SCM Ethernet */ 0x0ff0, 0x00, 0x20, 0xcb, 0 }, { /* Socket EA */ 0x4000, 0x00, 0xc0, 0x1b, DELAY_OUTPUT | HAS_MISC_REG | USE_BIG_BUF }, { /* Socket LP-E CF+ */ 0x01c0, 0x00, 0xc0, 0x1b, 0 }, { /* SuperSocket RE450T */ 0x0110, 0x00, 0xe0, 0x98, 0 }, { /* Volktek NPL-402CT */ 0x0060, 0x00, 0x40, 0x05, 0 }, { /* NEC PC-9801N-J12 */ 0x0ff0, 0x00, 0x00, 0x4c, 0 }, { /* PCMCIA Technology OEM */ 0x01c8, 0x00, 0xa0, 0x0c, 0 } }; #define NR_INFO ARRAY_SIZE(hw_info) static struct hw_info default_info = { 0, 0, 0, 0, 0 }; static struct hw_info dl10019_info = { 0, 0, 0, 0, IS_DL10019|HAS_MII }; static struct hw_info dl10022_info = { 0, 0, 0, 0, IS_DL10022|HAS_MII }; struct pcnet_dev { struct pcmcia_device *p_dev; u_int flags; void __iomem *base; struct timer_list watchdog; int stale, fast_poll; u_char phy_id; u_char eth_phy, pna_phy; u_short link_status; u_long mii_reset; }; static inline struct pcnet_dev *PRIV(struct net_device *dev) { char *p = netdev_priv(dev); return (struct pcnet_dev *)(p + sizeof(struct ei_device)); } static const struct net_device_ops pcnet_netdev_ops = { .ndo_open = pcnet_open, .ndo_stop = pcnet_close, .ndo_set_config = set_config, .ndo_start_xmit = ei_start_xmit, .ndo_get_stats = ei_get_stats, .ndo_eth_ioctl = ei_ioctl, .ndo_set_rx_mode = ei_set_multicast_list, .ndo_tx_timeout = ei_tx_timeout, .ndo_set_mac_address = eth_mac_addr, .ndo_validate_addr = eth_validate_addr, #ifdef CONFIG_NET_POLL_CONTROLLER .ndo_poll_controller = ei_poll, #endif }; static int pcnet_probe(struct pcmcia_device *link) { struct pcnet_dev *info; struct net_device *dev; dev_dbg(&link->dev, "pcnet_attach()\n"); /* Create new ethernet device */ dev = __alloc_ei_netdev(sizeof(struct pcnet_dev)); if (!dev) return -ENOMEM; info = PRIV(dev); info->p_dev = link; link->priv = dev; link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO; dev->netdev_ops = &pcnet_netdev_ops; return pcnet_config(link); } /* pcnet_attach */ static void pcnet_detach(struct pcmcia_device *link) { struct net_device *dev = link->priv; dev_dbg(&link->dev, "pcnet_detach\n"); unregister_netdev(dev); pcnet_release(link); free_netdev(dev); } /* pcnet_detach */ /*====================================================================== This probes for a card's hardware address, for card types that encode this information in their CIS. ======================================================================*/ static struct hw_info *get_hwinfo(struct pcmcia_device *link) { struct net_device *dev = link->priv; u_char __iomem *base, *virt; u8 addr[ETH_ALEN]; int i, j; /* Allocate a small memory window */ link->resource[2]->flags |= WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE; link->resource[2]->start = 0; link->resource[2]->end = 0; i = pcmcia_request_window(link, link->resource[2], 0); if (i != 0) return NULL; virt = ioremap(link->resource[2]->start, resource_size(link->resource[2])); if (unlikely(!virt)) { pcmcia_release_window(link, link->resource[2]); return NULL; } for (i = 0; i < NR_INFO; i++) { pcmcia_map_mem_page(link, link->resource[2], hw_info[i].offset & ~(resource_size(link->resource[2])-1)); base = &virt[hw_info[i].offset & (resource_size(link->resource[2])-1)]; if ((readb(base+0) == hw_info[i].a0) && (readb(base+2) == hw_info[i].a1) && (readb(base+4) == hw_info[i].a2)) { for (j = 0; j < 6; j++) addr[j] = readb(base + (j<<1)); eth_hw_addr_set(dev, addr); break; } } iounmap(virt); j = pcmcia_release_window(link, link->resource[2]); return (i < NR_INFO) ? hw_info+i : NULL; } /* get_hwinfo */ /*====================================================================== This probes for a card's hardware address by reading the PROM. It checks the address against a list of known types, then falls back to a simple NE2000 clone signature check. ======================================================================*/ static struct hw_info *get_prom(struct pcmcia_device *link) { struct net_device *dev = link->priv; unsigned int ioaddr = dev->base_addr; u8 addr[ETH_ALEN]; u_char prom[32]; int i, j; /* This is lifted straight from drivers/net/ethernet/8390/ne.c */ struct { u_char value, offset; } program_seq[] = { {E8390_NODMA+E8390_PAGE0+E8390_STOP, E8390_CMD}, /* Select page 0*/ {0x48, EN0_DCFG}, /* Set byte-wide (0x48) access. */ {0x00, EN0_RCNTLO}, /* Clear the count regs. */ {0x00, EN0_RCNTHI}, {0x00, EN0_IMR}, /* Mask completion irq. */ {0xFF, EN0_ISR}, {E8390_RXOFF, EN0_RXCR}, /* 0x20 Set to monitor */ {E8390_TXOFF, EN0_TXCR}, /* 0x02 and loopback mode. */ {32, EN0_RCNTLO}, {0x00, EN0_RCNTHI}, {0x00, EN0_RSARLO}, /* DMA starting at 0x0000. */ {0x00, EN0_RSARHI}, {E8390_RREAD+E8390_START, E8390_CMD}, }; pcnet_reset_8390(dev); mdelay(10); for (i = 0; i < ARRAY_SIZE(program_seq); i++) outb_p(program_seq[i].value, ioaddr + program_seq[i].offset); for (i = 0; i < 32; i++) prom[i] = inb(ioaddr + PCNET_DATAPORT); for (i = 0; i < NR_INFO; i++) { if ((prom[0] == hw_info[i].a0) && (prom[2] == hw_info[i].a1) && (prom[4] == hw_info[i].a2)) break; } if ((i < NR_INFO) || ((prom[28] == 0x57) && (prom[30] == 0x57))) { for (j = 0; j < 6; j++) addr[j] = prom[j<<1]; eth_hw_addr_set(dev, addr); return (i < NR_INFO) ? hw_info+i : &default_info; } return NULL; } /* get_prom */ /*====================================================================== For DL10019 based cards, like the Linksys EtherFast ======================================================================*/ static struct hw_info *get_dl10019(struct pcmcia_device *link) { struct net_device *dev = link->priv; u8 addr[ETH_ALEN]; int i; u_char sum; for (sum = 0, i = 0x14; i < 0x1c; i++) sum += inb_p(dev->base_addr + i); if (sum != 0xff) return NULL; for (i = 0; i < 6; i++) addr[i] = inb_p(dev->base_addr + 0x14 + i); eth_hw_addr_set(dev, addr); i = inb(dev->base_addr + 0x1f); return ((i == 0x91)||(i == 0x99)) ? &dl10022_info : &dl10019_info; } /*====================================================================== For Asix AX88190 based cards ======================================================================*/ static struct hw_info *get_ax88190(struct pcmcia_device *link) { struct net_device *dev = link->priv; unsigned int ioaddr = dev->base_addr; u8 addr[ETH_ALEN]; int i, j; /* Not much of a test, but the alternatives are messy */ if (link->config_base != 0x03c0) return NULL; outb_p(0x01, ioaddr + EN0_DCFG); /* Set word-wide access. */ outb_p(0x00, ioaddr + EN0_RSARLO); /* DMA starting at 0x0400. */ outb_p(0x04, ioaddr + EN0_RSARHI); outb_p(E8390_RREAD+E8390_START, ioaddr + E8390_CMD); for (i = 0; i < 6; i += 2) { j = inw(ioaddr + PCNET_DATAPORT); addr[i] = j & 0xff; addr[i+1] = j >> 8; } eth_hw_addr_set(dev, addr); return NULL; } /*====================================================================== This should be totally unnecessary... but when we can't figure out the hardware address any other way, we'll let the user hard wire it when the module is initialized. ======================================================================*/ static struct hw_info *get_hwired(struct pcmcia_device *link) { struct net_device *dev = link->priv; u8 addr[ETH_ALEN]; int i; for (i = 0; i < 6; i++) if (hw_addr[i] != 0) break; if (i == 6) return NULL; for (i = 0; i < 6; i++) addr[i] = hw_addr[i]; eth_hw_addr_set(dev, addr); return &default_info; } /* get_hwired */ static int try_io_port(struct pcmcia_device *link) { int j, ret; link->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; link->resource[1]->flags &= ~IO_DATA_PATH_WIDTH; if (link->resource[0]->end == 32) { link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; if (link->resource[1]->end > 0) { /* for master/slave multifunction cards */ link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; } } else { /* This should be two 16-port windows */ link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; link->resource[1]->flags |= IO_DATA_PATH_WIDTH_16; } if (link->resource[0]->start == 0) { for (j = 0; j < 0x400; j += 0x20) { link->resource[0]->start = j ^ 0x300; link->resource[1]->start = (j ^ 0x300) + 0x10; link->io_lines = 16; ret = pcmcia_request_io(link); if (ret == 0) return ret; } return ret; } else { return pcmcia_request_io(link); } } static int pcnet_confcheck(struct pcmcia_device *p_dev, void *priv_data) { int *priv = priv_data; int try = (*priv & 0x1); *priv &= (p_dev->resource[2]->end >= 0x4000) ? 0x10 : ~0x10; if (p_dev->config_index == 0) return -EINVAL; if (p_dev->resource[0]->end + p_dev->resource[1]->end < 32) return -EINVAL; if (try) p_dev->io_lines = 16; return try_io_port(p_dev); } static struct hw_info *pcnet_try_config(struct pcmcia_device *link, int *has_shmem, int try) { struct net_device *dev = link->priv; struct hw_info *local_hw_info; struct pcnet_dev *info = PRIV(dev); int priv = try; int ret; ret = pcmcia_loop_config(link, pcnet_confcheck, &priv); if (ret) { dev_warn(&link->dev, "no useable port range found\n"); return NULL; } *has_shmem = (priv & 0x10); if (!link->irq) return NULL; if (resource_size(link->resource[1]) == 8) link->config_flags |= CONF_ENABLE_SPKR; if ((link->manf_id == MANFID_IBM) && (link->card_id == PRODID_IBM_HOME_AND_AWAY)) link->config_index |= 0x10; ret = pcmcia_enable_device(link); if (ret) return NULL; dev->irq = link->irq; dev->base_addr = link->resource[0]->start; if (info->flags & HAS_MISC_REG) { if ((if_port == 1) || (if_port == 2)) dev->if_port = if_port; else dev_notice(&link->dev, "invalid if_port requested\n"); } else dev->if_port = 0; if ((link->config_base == 0x03c0) && (link->manf_id == 0x149) && (link->card_id == 0xc1ab)) { dev_info(&link->dev, "this is an AX88190 card - use axnet_cs instead.\n"); return NULL; } local_hw_info = get_hwinfo(link); if (!local_hw_info) local_hw_info = get_prom(link); if (!local_hw_info) local_hw_info = get_dl10019(link); if (!local_hw_info) local_hw_info = get_ax88190(link); if (!local_hw_info) local_hw_info = get_hwired(link); return local_hw_info; } static int pcnet_config(struct pcmcia_device *link) { struct net_device *dev = link->priv; struct pcnet_dev *info = PRIV(dev); int start_pg, stop_pg, cm_offset; int has_shmem = 0; struct hw_info *local_hw_info; dev_dbg(&link->dev, "pcnet_config\n"); local_hw_info = pcnet_try_config(link, &has_shmem, 0); if (!local_hw_info) { /* check whether forcing io_lines to 16 helps... */ pcmcia_disable_device(link); local_hw_info = pcnet_try_config(link, &has_shmem, 1); if (local_hw_info == NULL) { dev_notice(&link->dev, "unable to read hardware net" " address for io base %#3lx\n", dev->base_addr); goto failed; } } info->flags = local_hw_info->flags; /* Check for user overrides */ info->flags |= (delay_output) ? DELAY_OUTPUT : 0; if ((link->manf_id == MANFID_SOCKET) && ((link->card_id == PRODID_SOCKET_LPE) || (link->card_id == PRODID_SOCKET_LPE_CF) || (link->card_id == PRODID_SOCKET_EIO))) info->flags &= ~USE_BIG_BUF; if (!use_big_buf) info->flags &= ~USE_BIG_BUF; if (info->flags & USE_BIG_BUF) { start_pg = SOCKET_START_PG; stop_pg = SOCKET_STOP_PG; cm_offset = 0x10000; } else { start_pg = PCNET_START_PG; stop_pg = PCNET_STOP_PG; cm_offset = 0; } /* has_shmem is ignored if use_shmem != -1 */ if ((use_shmem == 0) || (!has_shmem && (use_shmem == -1)) || (setup_shmem_window(link, start_pg, stop_pg, cm_offset) != 0)) setup_dma_config(link, start_pg, stop_pg); ei_status.name = "NE2000"; ei_status.word16 = 1; ei_status.reset_8390 = pcnet_reset_8390; if (info->flags & (IS_DL10019|IS_DL10022)) mii_phy_probe(dev); SET_NETDEV_DEV(dev, &link->dev); if (register_netdev(dev) != 0) { pr_notice("register_netdev() failed\n"); goto failed; } if (info->flags & (IS_DL10019|IS_DL10022)) { u_char id = inb(dev->base_addr + 0x1a); netdev_info(dev, "NE2000 (DL100%d rev %02x): ", (info->flags & IS_DL10022) ? 22 : 19, id); if (info->pna_phy) pr_cont("PNA, "); } else { netdev_info(dev, "NE2000 Compatible: "); } pr_cont("io %#3lx, irq %d,", dev->base_addr, dev->irq); if (info->flags & USE_SHMEM) pr_cont(" mem %#5lx,", dev->mem_start); if (info->flags & HAS_MISC_REG) pr_cont(" %s xcvr,", if_names[dev->if_port]); pr_cont(" hw_addr %pM\n", dev->dev_addr); return 0; failed: pcnet_release(link); return -ENODEV; } /* pcnet_config */ static void pcnet_release(struct pcmcia_device *link) { struct pcnet_dev *info = PRIV(link->priv); dev_dbg(&link->dev, "pcnet_release\n"); if (info->flags & USE_SHMEM) iounmap(info->base); pcmcia_disable_device(link); } static int pcnet_suspend(struct pcmcia_device *link) { struct net_device *dev = link->priv; if (link->open) netif_device_detach(dev); return 0; } static int pcnet_resume(struct pcmcia_device *link) { struct net_device *dev = link->priv; if (link->open) { pcnet_reset_8390(dev); NS8390_init(dev, 1); netif_device_attach(dev); } return 0; } /*====================================================================== MII interface support for DL10019 and DL10022 based cards On the DL10019, the MII IO direction bit is 0x10; on the DL10022 it is 0x20. Setting both bits seems to work on both card types. ======================================================================*/ #define DLINK_GPIO 0x1c #define DLINK_DIAG 0x1d #define DLINK_EEPROM 0x1e #define MDIO_SHIFT_CLK 0x80 #define MDIO_DATA_OUT 0x40 #define MDIO_DIR_WRITE 0x30 #define MDIO_DATA_WRITE0 (MDIO_DIR_WRITE) #define MDIO_DATA_WRITE1 (MDIO_DIR_WRITE | MDIO_DATA_OUT) #define MDIO_DATA_READ 0x10 #define MDIO_MASK 0x0f static void mdio_sync(unsigned int addr) { int bits, mask = inb(addr) & MDIO_MASK; for (bits = 0; bits < 32; bits++) { outb(mask | MDIO_DATA_WRITE1, addr); outb(mask | MDIO_DATA_WRITE1 | MDIO_SHIFT_CLK, addr); } } static int mdio_read(unsigned int addr, int phy_id, int loc) { u_int cmd = (0x06<<10)|(phy_id<<5)|loc; int i, retval = 0, mask = inb(addr) & MDIO_MASK; mdio_sync(addr); for (i = 13; i >= 0; i--) { int dat = (cmd&(1< 0; i--) { outb(mask, addr); retval = (retval << 1) | ((inb(addr) & MDIO_DATA_READ) != 0); outb(mask | MDIO_SHIFT_CLK, addr); } return (retval>>1) & 0xffff; } static void mdio_write(unsigned int addr, int phy_id, int loc, int value) { u_int cmd = (0x05<<28)|(phy_id<<23)|(loc<<18)|(1<<17)|value; int i, mask = inb(addr) & MDIO_MASK; mdio_sync(addr); for (i = 31; i >= 0; i--) { int dat = (cmd&(1<= 0; i--) { outb(mask, addr); outb(mask | MDIO_SHIFT_CLK, addr); } } /*====================================================================== EEPROM access routines for DL10019 and DL10022 based cards ======================================================================*/ #define EE_EEP 0x40 #define EE_ASIC 0x10 #define EE_CS 0x08 #define EE_CK 0x04 #define EE_DO 0x02 #define EE_DI 0x01 #define EE_ADOT 0x01 /* DataOut for ASIC */ #define EE_READ_CMD 0x06 #define DL19FDUPLX 0x0400 /* DL10019 Full duplex mode */ static int read_eeprom(unsigned int ioaddr, int location) { int i, retval = 0; unsigned int ee_addr = ioaddr + DLINK_EEPROM; int read_cmd = location | (EE_READ_CMD << 8); outb(0, ee_addr); outb(EE_EEP|EE_CS, ee_addr); /* Shift the read command bits out. */ for (i = 10; i >= 0; i--) { short dataval = (read_cmd & (1 << i)) ? EE_DO : 0; outb_p(EE_EEP|EE_CS|dataval, ee_addr); outb_p(EE_EEP|EE_CS|dataval|EE_CK, ee_addr); } outb(EE_EEP|EE_CS, ee_addr); for (i = 16; i > 0; i--) { outb_p(EE_EEP|EE_CS | EE_CK, ee_addr); retval = (retval << 1) | ((inb(ee_addr) & EE_DI) ? 1 : 0); outb_p(EE_EEP|EE_CS, ee_addr); } /* Terminate the EEPROM access. */ outb(0, ee_addr); return retval; } /* The internal ASIC registers can be changed by EEPROM READ access with EE_ASIC bit set. In ASIC mode, EE_ADOT is used to output the data to the ASIC. */ static void write_asic(unsigned int ioaddr, int location, short asic_data) { int i; unsigned int ee_addr = ioaddr + DLINK_EEPROM; short dataval; int read_cmd = location | (EE_READ_CMD << 8); asic_data |= read_eeprom(ioaddr, location); outb(0, ee_addr); outb(EE_ASIC|EE_CS|EE_DI, ee_addr); read_cmd = read_cmd >> 1; /* Shift the read command bits out. */ for (i = 9; i >= 0; i--) { dataval = (read_cmd & (1 << i)) ? EE_DO : 0; outb_p(EE_ASIC|EE_CS|EE_DI|dataval, ee_addr); outb_p(EE_ASIC|EE_CS|EE_DI|dataval|EE_CK, ee_addr); outb_p(EE_ASIC|EE_CS|EE_DI|dataval, ee_addr); } // sync outb(EE_ASIC|EE_CS, ee_addr); outb(EE_ASIC|EE_CS|EE_CK, ee_addr); outb(EE_ASIC|EE_CS, ee_addr); for (i = 15; i >= 0; i--) { dataval = (asic_data & (1 << i)) ? EE_ADOT : 0; outb_p(EE_ASIC|EE_CS|dataval, ee_addr); outb_p(EE_ASIC|EE_CS|dataval|EE_CK, ee_addr); outb_p(EE_ASIC|EE_CS|dataval, ee_addr); } /* Terminate the ASIC access. */ outb(EE_ASIC|EE_DI, ee_addr); outb(EE_ASIC|EE_DI| EE_CK, ee_addr); outb(EE_ASIC|EE_DI, ee_addr); outb(0, ee_addr); } /*====================================================================*/ static void set_misc_reg(struct net_device *dev) { unsigned int nic_base = dev->base_addr; struct pcnet_dev *info = PRIV(dev); u_char tmp; if (info->flags & HAS_MISC_REG) { tmp = inb_p(nic_base + PCNET_MISC) & ~3; if (dev->if_port == 2) tmp |= 1; if (info->flags & USE_BIG_BUF) tmp |= 2; if (info->flags & HAS_IBM_MISC) tmp |= 8; outb_p(tmp, nic_base + PCNET_MISC); } if (info->flags & IS_DL10022) { if (info->flags & HAS_MII) { /* Advertise 100F, 100H, 10F, 10H */ mdio_write(nic_base + DLINK_GPIO, info->eth_phy, 4, 0x01e1); /* Restart MII autonegotiation */ mdio_write(nic_base + DLINK_GPIO, info->eth_phy, 0, 0x0000); mdio_write(nic_base + DLINK_GPIO, info->eth_phy, 0, 0x1200); info->mii_reset = jiffies; } else { outb(full_duplex ? 4 : 0, nic_base + DLINK_DIAG); } } else if (info->flags & IS_DL10019) { /* Advertise 100F, 100H, 10F, 10H */ mdio_write(nic_base + DLINK_GPIO, info->eth_phy, 4, 0x01e1); /* Restart MII autonegotiation */ mdio_write(nic_base + DLINK_GPIO, info->eth_phy, 0, 0x0000); mdio_write(nic_base + DLINK_GPIO, info->eth_phy, 0, 0x1200); } } /*====================================================================*/ static void mii_phy_probe(struct net_device *dev) { struct pcnet_dev *info = PRIV(dev); unsigned int mii_addr = dev->base_addr + DLINK_GPIO; int i; u_int tmp, phyid; for (i = 31; i >= 0; i--) { tmp = mdio_read(mii_addr, i, 1); if ((tmp == 0) || (tmp == 0xffff)) continue; tmp = mdio_read(mii_addr, i, MII_PHYID_REG1); phyid = tmp << 16; phyid |= mdio_read(mii_addr, i, MII_PHYID_REG2); phyid &= MII_PHYID_REV_MASK; netdev_dbg(dev, "MII at %d is 0x%08x\n", i, phyid); if (phyid == AM79C9XX_HOME_PHY) { info->pna_phy = i; } else if (phyid != AM79C9XX_ETH_PHY) { info->eth_phy = i; } } } static int pcnet_open(struct net_device *dev) { int ret; struct pcnet_dev *info = PRIV(dev); struct pcmcia_device *link = info->p_dev; unsigned int nic_base = dev->base_addr; dev_dbg(&link->dev, "pcnet_open('%s')\n", dev->name); if (!pcmcia_dev_present(link)) return -ENODEV; set_misc_reg(dev); outb_p(0xFF, nic_base + EN0_ISR); /* Clear bogus intr. */ ret = request_irq(dev->irq, ei_irq_wrapper, IRQF_SHARED, dev->name, dev); if (ret) return ret; link->open++; info->phy_id = info->eth_phy; info->link_status = 0x00; timer_setup(&info->watchdog, ei_watchdog, 0); mod_timer(&info->watchdog, jiffies + HZ); return ei_open(dev); } /* pcnet_open */ /*====================================================================*/ static int pcnet_close(struct net_device *dev) { struct pcnet_dev *info = PRIV(dev); struct pcmcia_device *link = info->p_dev; dev_dbg(&link->dev, "pcnet_close('%s')\n", dev->name); ei_close(dev); free_irq(dev->irq, dev); link->open--; netif_stop_queue(dev); del_timer_sync(&info->watchdog); return 0; } /* pcnet_close */ /*====================================================================== Hard reset the card. This used to pause for the same period that a 8390 reset command required, but that shouldn't be necessary. ======================================================================*/ static void pcnet_reset_8390(struct net_device *dev) { unsigned int nic_base = dev->base_addr; int i; ei_status.txing = ei_status.dmaing = 0; outb_p(E8390_NODMA+E8390_PAGE0+E8390_STOP, nic_base + E8390_CMD); outb(inb(nic_base + PCNET_RESET), nic_base + PCNET_RESET); for (i = 0; i < 100; i++) { if ((inb_p(nic_base+EN0_ISR) & ENISR_RESET) != 0) break; udelay(100); } outb_p(ENISR_RESET, nic_base + EN0_ISR); /* Ack intr. */ if (i == 100) netdev_err(dev, "pcnet_reset_8390() did not complete.\n"); set_misc_reg(dev); } /* pcnet_reset_8390 */ /*====================================================================*/ static int set_config(struct net_device *dev, struct ifmap *map) { struct pcnet_dev *info = PRIV(dev); if ((map->port != (u_char)(-1)) && (map->port != dev->if_port)) { if (!(info->flags & HAS_MISC_REG)) return -EOPNOTSUPP; else if ((map->port < 1) || (map->port > 2)) return -EINVAL; WRITE_ONCE(dev->if_port, map->port); netdev_info(dev, "switched to %s port\n", if_names[dev->if_port]); NS8390_init(dev, 1); } return 0; } /*====================================================================*/ static irqreturn_t ei_irq_wrapper(int irq, void *dev_id) { struct net_device *dev = dev_id; struct pcnet_dev *info; irqreturn_t ret = ei_interrupt(irq, dev_id); if (ret == IRQ_HANDLED) { info = PRIV(dev); info->stale = 0; } return ret; } static void ei_watchdog(struct timer_list *t) { struct pcnet_dev *info = from_timer(info, t, watchdog); struct net_device *dev = info->p_dev->priv; unsigned int nic_base = dev->base_addr; unsigned int mii_addr = nic_base + DLINK_GPIO; u_short link; if (!netif_device_present(dev)) goto reschedule; /* Check for pending interrupt with expired latency timer: with this, we can limp along even if the interrupt is blocked */ if (info->stale++ && (inb_p(nic_base + EN0_ISR) & ENISR_ALL)) { if (!info->fast_poll) netdev_info(dev, "interrupt(s) dropped!\n"); ei_irq_wrapper(dev->irq, dev); info->fast_poll = HZ; } if (info->fast_poll) { info->fast_poll--; info->watchdog.expires = jiffies + 1; add_timer(&info->watchdog); return; } if (!(info->flags & HAS_MII)) goto reschedule; mdio_read(mii_addr, info->phy_id, 1); link = mdio_read(mii_addr, info->phy_id, 1); if (!link || (link == 0xffff)) { if (info->eth_phy) { info->phy_id = info->eth_phy = 0; } else { netdev_info(dev, "MII is missing!\n"); info->flags &= ~HAS_MII; } goto reschedule; } link &= 0x0004; if (link != info->link_status) { u_short p = mdio_read(mii_addr, info->phy_id, 5); netdev_info(dev, "%s link beat\n", link ? "found" : "lost"); if (link && (info->flags & IS_DL10022)) { /* Disable collision detection on full duplex links */ outb((p & 0x0140) ? 4 : 0, nic_base + DLINK_DIAG); } else if (link && (info->flags & IS_DL10019)) { /* Disable collision detection on full duplex links */ write_asic(dev->base_addr, 4, (p & 0x140) ? DL19FDUPLX : 0); } if (link) { if (info->phy_id == info->eth_phy) { if (p) netdev_info(dev, "autonegotiation complete: " "%sbaseT-%cD selected\n", ((p & 0x0180) ? "100" : "10"), ((p & 0x0140) ? 'F' : 'H')); else netdev_info(dev, "link partner did not autonegotiate\n"); } NS8390_init(dev, 1); } info->link_status = link; } if (info->pna_phy && time_after(jiffies, info->mii_reset + 6*HZ)) { link = mdio_read(mii_addr, info->eth_phy, 1) & 0x0004; if (((info->phy_id == info->pna_phy) && link) || ((info->phy_id != info->pna_phy) && !link)) { /* isolate this MII and try flipping to the other one */ mdio_write(mii_addr, info->phy_id, 0, 0x0400); info->phy_id ^= info->pna_phy ^ info->eth_phy; netdev_info(dev, "switched to %s transceiver\n", (info->phy_id == info->eth_phy) ? "ethernet" : "PNA"); mdio_write(mii_addr, info->phy_id, 0, (info->phy_id == info->eth_phy) ? 0x1000 : 0); info->link_status = 0; info->mii_reset = jiffies; } } reschedule: info->watchdog.expires = jiffies + HZ; add_timer(&info->watchdog); } /*====================================================================*/ static int ei_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) { struct pcnet_dev *info = PRIV(dev); struct mii_ioctl_data *data = if_mii(rq); unsigned int mii_addr = dev->base_addr + DLINK_GPIO; if (!(info->flags & (IS_DL10019|IS_DL10022))) return -EINVAL; switch (cmd) { case SIOCGMIIPHY: data->phy_id = info->phy_id; fallthrough; case SIOCGMIIREG: /* Read MII PHY register. */ data->val_out = mdio_read(mii_addr, data->phy_id, data->reg_num & 0x1f); return 0; case SIOCSMIIREG: /* Write MII PHY register. */ mdio_write(mii_addr, data->phy_id, data->reg_num & 0x1f, data->val_in); return 0; } return -EOPNOTSUPP; } /*====================================================================*/ static void dma_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_page) { unsigned int nic_base = dev->base_addr; if (ei_status.dmaing) { netdev_err(dev, "DMAing conflict in dma_block_input." "[DMAstat:%1x][irqlock:%1x]\n", ei_status.dmaing, ei_status.irqlock); return; } ei_status.dmaing |= 0x01; outb_p(E8390_NODMA+E8390_PAGE0+E8390_START, nic_base + PCNET_CMD); outb_p(sizeof(struct e8390_pkt_hdr), nic_base + EN0_RCNTLO); outb_p(0, nic_base + EN0_RCNTHI); outb_p(0, nic_base + EN0_RSARLO); /* On page boundary */ outb_p(ring_page, nic_base + EN0_RSARHI); outb_p(E8390_RREAD+E8390_START, nic_base + PCNET_CMD); insw(nic_base + PCNET_DATAPORT, hdr, sizeof(struct e8390_pkt_hdr)>>1); /* Fix for big endian systems */ hdr->count = le16_to_cpu(hdr->count); outb_p(ENISR_RDC, nic_base + EN0_ISR); /* Ack intr. */ ei_status.dmaing &= ~0x01; } /*====================================================================*/ static void dma_block_input(struct net_device *dev, int count, struct sk_buff *skb, int ring_offset) { unsigned int nic_base = dev->base_addr; int xfer_count = count; char *buf = skb->data; struct ei_device *ei_local = netdev_priv(dev); if ((netif_msg_rx_status(ei_local)) && (count != 4)) netdev_dbg(dev, "[bi=%d]\n", count+4); if (ei_status.dmaing) { netdev_err(dev, "DMAing conflict in dma_block_input." "[DMAstat:%1x][irqlock:%1x]\n", ei_status.dmaing, ei_status.irqlock); return; } ei_status.dmaing |= 0x01; outb_p(E8390_NODMA+E8390_PAGE0+E8390_START, nic_base + PCNET_CMD); outb_p(count & 0xff, nic_base + EN0_RCNTLO); outb_p(count >> 8, nic_base + EN0_RCNTHI); outb_p(ring_offset & 0xff, nic_base + EN0_RSARLO); outb_p(ring_offset >> 8, nic_base + EN0_RSARHI); outb_p(E8390_RREAD+E8390_START, nic_base + PCNET_CMD); insw(nic_base + PCNET_DATAPORT,buf,count>>1); if (count & 0x01) { buf[count-1] = inb(nic_base + PCNET_DATAPORT); xfer_count++; } /* This was for the ALPHA version only, but enough people have been encountering problems that it is still here. */ #ifdef PCMCIA_DEBUG /* DMA termination address check... */ if (netif_msg_rx_status(ei_local)) { int addr, tries = 20; do { /* DON'T check for 'inb_p(EN0_ISR) & ENISR_RDC' here -- it's broken for Rx on some cards! */ int high = inb_p(nic_base + EN0_RSARHI); int low = inb_p(nic_base + EN0_RSARLO); addr = (high << 8) + low; if (((ring_offset + xfer_count) & 0xff) == (addr & 0xff)) break; } while (--tries > 0); if (tries <= 0) netdev_notice(dev, "RX transfer address mismatch," "%#4.4x (expected) vs. %#4.4x (actual).\n", ring_offset + xfer_count, addr); } #endif outb_p(ENISR_RDC, nic_base + EN0_ISR); /* Ack intr. */ ei_status.dmaing &= ~0x01; } /* dma_block_input */ /*====================================================================*/ static void dma_block_output(struct net_device *dev, int count, const u_char *buf, const int start_page) { unsigned int nic_base = dev->base_addr; struct pcnet_dev *info = PRIV(dev); #ifdef PCMCIA_DEBUG int retries = 0; struct ei_device *ei_local = netdev_priv(dev); #endif u_long dma_start; #ifdef PCMCIA_DEBUG netif_dbg(ei_local, tx_queued, dev, "[bo=%d]\n", count); #endif /* Round the count up for word writes. Do we need to do this? What effect will an odd byte count have on the 8390? I should check someday. */ if (count & 0x01) count++; if (ei_status.dmaing) { netdev_err(dev, "DMAing conflict in dma_block_output." "[DMAstat:%1x][irqlock:%1x]\n", ei_status.dmaing, ei_status.irqlock); return; } ei_status.dmaing |= 0x01; /* We should already be in page 0, but to be safe... */ outb_p(E8390_PAGE0+E8390_START+E8390_NODMA, nic_base+PCNET_CMD); #ifdef PCMCIA_DEBUG retry: #endif outb_p(ENISR_RDC, nic_base + EN0_ISR); /* Now the normal output. */ outb_p(count & 0xff, nic_base + EN0_RCNTLO); outb_p(count >> 8, nic_base + EN0_RCNTHI); outb_p(0x00, nic_base + EN0_RSARLO); outb_p(start_page, nic_base + EN0_RSARHI); outb_p(E8390_RWRITE+E8390_START, nic_base + PCNET_CMD); outsw(nic_base + PCNET_DATAPORT, buf, count>>1); dma_start = jiffies; #ifdef PCMCIA_DEBUG /* This was for the ALPHA version only, but enough people have been encountering problems that it is still here. */ /* DMA termination address check... */ if (netif_msg_tx_queued(ei_local)) { int addr, tries = 20; do { int high = inb_p(nic_base + EN0_RSARHI); int low = inb_p(nic_base + EN0_RSARLO); addr = (high << 8) + low; if ((start_page << 8) + count == addr) break; } while (--tries > 0); if (tries <= 0) { netdev_notice(dev, "Tx packet transfer address mismatch," "%#4.4x (expected) vs. %#4.4x (actual).\n", (start_page << 8) + count, addr); if (retries++ == 0) goto retry; } } #endif while ((inb_p(nic_base + EN0_ISR) & ENISR_RDC) == 0) if (time_after(jiffies, dma_start + PCNET_RDC_TIMEOUT)) { netdev_warn(dev, "timeout waiting for Tx RDC.\n"); pcnet_reset_8390(dev); NS8390_init(dev, 1); break; } outb_p(ENISR_RDC, nic_base + EN0_ISR); /* Ack intr. */ if (info->flags & DELAY_OUTPUT) udelay((long)delay_time); ei_status.dmaing &= ~0x01; } /*====================================================================*/ static int setup_dma_config(struct pcmcia_device *link, int start_pg, int stop_pg) { struct net_device *dev = link->priv; ei_status.tx_start_page = start_pg; ei_status.rx_start_page = start_pg + TX_PAGES; ei_status.stop_page = stop_pg; /* set up block i/o functions */ ei_status.get_8390_hdr = dma_get_8390_hdr; ei_status.block_input = dma_block_input; ei_status.block_output = dma_block_output; return 0; } /*====================================================================*/ static void copyin(void *dest, void __iomem *src, int c) { u_short *d = dest; u_short __iomem *s = src; int odd; if (c <= 0) return; odd = (c & 1); c >>= 1; if (c) { do { *d++ = __raw_readw(s++); } while (--c); } /* get last byte by fetching a word and masking */ if (odd) *((u_char *)d) = readw(s) & 0xff; } static void copyout(void __iomem *dest, const void *src, int c) { u_short __iomem *d = dest; const u_short *s = src; int odd; if (c <= 0) return; odd = (c & 1); c >>= 1; if (c) { do { __raw_writew(*s++, d++); } while (--c); } /* copy last byte doing a read-modify-write */ if (odd) writew((readw(d) & 0xff00) | *(u_char *)s, d); } /*====================================================================*/ static void shmem_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_page) { void __iomem *xfer_start = ei_status.mem + (TX_PAGES<<8) + (ring_page << 8) - (ei_status.rx_start_page << 8); copyin(hdr, xfer_start, sizeof(struct e8390_pkt_hdr)); /* Fix for big endian systems */ hdr->count = le16_to_cpu(hdr->count); } /*====================================================================*/ static void shmem_block_input(struct net_device *dev, int count, struct sk_buff *skb, int ring_offset) { void __iomem *base = ei_status.mem; unsigned long offset = (TX_PAGES<<8) + ring_offset - (ei_status.rx_start_page << 8); char *buf = skb->data; if (offset + count > ei_status.priv) { /* We must wrap the input move. */ int semi_count = ei_status.priv - offset; copyin(buf, base + offset, semi_count); buf += semi_count; offset = TX_PAGES<<8; count -= semi_count; } copyin(buf, base + offset, count); } /*====================================================================*/ static void shmem_block_output(struct net_device *dev, int count, const u_char *buf, const int start_page) { void __iomem *shmem = ei_status.mem + (start_page << 8); shmem -= ei_status.tx_start_page << 8; copyout(shmem, buf, count); } /*====================================================================*/ static int setup_shmem_window(struct pcmcia_device *link, int start_pg, int stop_pg, int cm_offset) { struct net_device *dev = link->priv; struct pcnet_dev *info = PRIV(dev); int i, window_size, offset, ret; window_size = (stop_pg - start_pg) << 8; if (window_size > 32 * 1024) window_size = 32 * 1024; /* Make sure it's a power of two. */ window_size = roundup_pow_of_two(window_size); /* Allocate a memory window */ link->resource[3]->flags |= WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM|WIN_ENABLE; link->resource[3]->flags |= WIN_USE_WAIT; link->resource[3]->start = 0; link->resource[3]->end = window_size; ret = pcmcia_request_window(link, link->resource[3], mem_speed); if (ret) goto failed; offset = (start_pg << 8) + cm_offset; offset -= offset % window_size; ret = pcmcia_map_mem_page(link, link->resource[3], offset); if (ret) goto failed; /* Try scribbling on the buffer */ info->base = ioremap(link->resource[3]->start, resource_size(link->resource[3])); if (unlikely(!info->base)) { ret = -ENOMEM; goto failed; } for (i = 0; i < (TX_PAGES<<8); i += 2) __raw_writew((i>>1), info->base+offset+i); udelay(100); for (i = 0; i < (TX_PAGES<<8); i += 2) if (__raw_readw(info->base+offset+i) != (i>>1)) break; pcnet_reset_8390(dev); if (i != (TX_PAGES<<8)) { iounmap(info->base); pcmcia_release_window(link, link->resource[3]); info->base = NULL; goto failed; } ei_status.mem = info->base + offset; ei_status.priv = resource_size(link->resource[3]); dev->mem_start = (u_long)ei_status.mem; dev->mem_end = dev->mem_start + resource_size(link->resource[3]); ei_status.tx_start_page = start_pg; ei_status.rx_start_page = start_pg + TX_PAGES; ei_status.stop_page = start_pg + ( (resource_size(link->resource[3]) - offset) >> 8); /* set up block i/o functions */ ei_status.get_8390_hdr = shmem_get_8390_hdr; ei_status.block_input = shmem_block_input; ei_status.block_output = shmem_block_output; info->flags |= USE_SHMEM; return 0; failed: return 1; } /*====================================================================*/ static const struct pcmcia_device_id pcnet_ids[] = { PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0057, 0x0021), PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0104, 0x000a), PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0105, 0xea15), PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0143, 0x3341), PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0143, 0xc0ab), PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x021b, 0x0101), PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x08a1, 0xc0ab), PCMCIA_PFC_DEVICE_PROD_ID12(0, "AnyCom", "Fast Ethernet + 56K COMBO", 0x578ba6e7, 0xb0ac62c4), PCMCIA_PFC_DEVICE_PROD_ID12(0, "ATKK", "LM33-PCM-T", 0xba9eb7e2, 0x077c174e), PCMCIA_PFC_DEVICE_PROD_ID12(0, "D-Link", "DME336T", 0x1a424a1c, 0xb23897ff), PCMCIA_PFC_DEVICE_PROD_ID12(0, "Grey Cell", "GCS3000", 0x2a151fac, 0x48b932ae), PCMCIA_PFC_DEVICE_PROD_ID12(0, "Linksys", "EtherFast 10&100 + 56K PC Card (PCMLM56)", 0x0733cc81, 0xb3765033), PCMCIA_PFC_DEVICE_PROD_ID12(0, "LINKSYS", "PCMLM336", 0xf7cb0b07, 0x7a821b58), PCMCIA_PFC_DEVICE_PROD_ID12(0, "MICRO RESEARCH", "COMBO-L/M-336", 0xb2ced065, 0x3ced0555), PCMCIA_PFC_DEVICE_PROD_ID12(0, "PCMCIAs", "ComboCard", 0xdcfe12d3, 0xcd8906cc), PCMCIA_PFC_DEVICE_PROD_ID12(0, "PCMCIAs", "LanModem", 0xdcfe12d3, 0xc67c648f), PCMCIA_MFC_DEVICE_PROD_ID12(0, "IBM", "Home and Away 28.8 PC Card ", 0xb569a6e5, 0x5bd4ff2c), PCMCIA_MFC_DEVICE_PROD_ID12(0, "IBM", "Home and Away Credit Card Adapter", 0xb569a6e5, 0x4bdf15c3), PCMCIA_MFC_DEVICE_PROD_ID12(0, "IBM", "w95 Home and Away Credit Card ", 0xb569a6e5, 0xae911c15), PCMCIA_MFC_DEVICE_PROD_ID123(0, "APEX DATA", "MULTICARD", "ETHERNET-MODEM", 0x11c2da09, 0x7289dc5d, 0xaad95e1f), PCMCIA_MFC_DEVICE_PROD_ID2(0, "FAX/Modem/Ethernet Combo Card ", 0x1ed59302), PCMCIA_DEVICE_MANF_CARD(0x0057, 0x1004), PCMCIA_DEVICE_MANF_CARD(0x0104, 0x000d), PCMCIA_DEVICE_MANF_CARD(0x0104, 0x0075), PCMCIA_DEVICE_MANF_CARD(0x0104, 0x0145), PCMCIA_DEVICE_MANF_CARD(0x0149, 0x0230), PCMCIA_DEVICE_MANF_CARD(0x0149, 0x4530), PCMCIA_DEVICE_MANF_CARD(0x0149, 0xc1ab), PCMCIA_DEVICE_MANF_CARD(0x0186, 0x0110), PCMCIA_DEVICE_MANF_CARD(0x01bf, 0x8041), PCMCIA_DEVICE_MANF_CARD(0x0213, 0x2452), PCMCIA_DEVICE_MANF_CARD(0x026f, 0x0300), PCMCIA_DEVICE_MANF_CARD(0x026f, 0x0307), PCMCIA_DEVICE_MANF_CARD(0x026f, 0x030a), PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1103), PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1121), PCMCIA_DEVICE_MANF_CARD(0xc001, 0x0009), PCMCIA_DEVICE_PROD_ID12("2408LAN", "Ethernet", 0x352fff7f, 0x00b2e941), PCMCIA_DEVICE_PROD_ID1234("Socket", "CF 10/100 Ethernet Card", "Revision B", "05/11/06", 0xb38bcc2e, 0x4de88352, 0xeaca6c8d, 0x7e57c22e), PCMCIA_DEVICE_PROD_ID123("Cardwell", "PCMCIA", "ETHERNET", 0x9533672e, 0x281f1c5d, 0x3ff7175b), PCMCIA_DEVICE_PROD_ID123("CNet ", "CN30BC", "ETHERNET", 0x9fe55d3d, 0x85601198, 0x3ff7175b), PCMCIA_DEVICE_PROD_ID123("Digital", "Ethernet", "Adapter", 0x9999ab35, 0x00b2e941, 0x4b0d829e), PCMCIA_DEVICE_PROD_ID123("Edimax Technology Inc.", "PCMCIA", "Ethernet Card", 0x738a0019, 0x281f1c5d, 0x5e9d92c0), PCMCIA_DEVICE_PROD_ID123("EFA ", "EFA207", "ETHERNET", 0x3d294be4, 0xeb9aab6c, 0x3ff7175b), PCMCIA_DEVICE_PROD_ID123("I-O DATA", "PCLA", "ETHERNET", 0x1d55d7ec, 0xe4c64d34, 0x3ff7175b), PCMCIA_DEVICE_PROD_ID123("IO DATA", "PCLATE", "ETHERNET", 0x547e66dc, 0x6b260753, 0x3ff7175b), PCMCIA_DEVICE_PROD_ID123("KingMax Technology Inc.", "EN10-T2", "PCMCIA Ethernet Card", 0x932b7189, 0x699e4436, 0x6f6652e0), PCMCIA_DEVICE_PROD_ID123("PCMCIA", "PCMCIA-ETHERNET-CARD", "UE2216", 0x281f1c5d, 0xd4cd2f20, 0xb87add82), PCMCIA_DEVICE_PROD_ID123("PCMCIA", "PCMCIA-ETHERNET-CARD", "UE2620", 0x281f1c5d, 0xd4cd2f20, 0x7d3d83a8), PCMCIA_DEVICE_PROD_ID1("2412LAN", 0x67f236ab), PCMCIA_DEVICE_PROD_ID12("ACCTON", "EN2212", 0xdfc6b5b2, 0xcb112a11), PCMCIA_DEVICE_PROD_ID12("ACCTON", "EN2216-PCMCIA-ETHERNET", 0xdfc6b5b2, 0x5542bfff), PCMCIA_DEVICE_PROD_ID12("Allied Telesis, K.K.", "CentreCOM LA100-PCM-T V2 100/10M LAN PC Card", 0xbb7fbdd7, 0xcd91cc68), PCMCIA_DEVICE_PROD_ID12("Allied Telesis K.K.", "LA100-PCM V2", 0x36634a66, 0xc6d05997), PCMCIA_DEVICE_PROD_ID12("Allied Telesis, K.K.", "CentreCOM LA-PCM_V2", 0xbb7fBdd7, 0x28e299f8), PCMCIA_DEVICE_PROD_ID12("Allied Telesis K.K.", "LA-PCM V3", 0x36634a66, 0x62241d96), PCMCIA_DEVICE_PROD_ID12("AmbiCom", "AMB8010", 0x5070a7f9, 0x82f96e96), PCMCIA_DEVICE_PROD_ID12("AmbiCom", "AMB8610", 0x5070a7f9, 0x86741224), PCMCIA_DEVICE_PROD_ID12("AmbiCom Inc", "AMB8002", 0x93b15570, 0x75ec3efb), PCMCIA_DEVICE_PROD_ID12("AmbiCom Inc", "AMB8002T", 0x93b15570, 0x461c5247), PCMCIA_DEVICE_PROD_ID12("AmbiCom Inc", "AMB8010", 0x93b15570, 0x82f96e96), PCMCIA_DEVICE_PROD_ID12("AnyCom", "ECO Ethernet", 0x578ba6e7, 0x0a9888c1), PCMCIA_DEVICE_PROD_ID12("AnyCom", "ECO Ethernet 10/100", 0x578ba6e7, 0x939fedbd), PCMCIA_DEVICE_PROD_ID12("AROWANA", "PCMCIA Ethernet LAN Card", 0x313adbc8, 0x08d9f190), PCMCIA_DEVICE_PROD_ID12("ASANTE", "FriendlyNet PC Card", 0x3a7ade0f, 0x41c64504), PCMCIA_DEVICE_PROD_ID12("Billionton", "LNT-10TB", 0x552ab682, 0xeeb1ba6a), PCMCIA_DEVICE_PROD_ID12("CF", "10Base-Ethernet", 0x44ebf863, 0x93ae4d79), PCMCIA_DEVICE_PROD_ID12("CNet", "CN40BC Ethernet", 0xbc477dde, 0xfba775a7), PCMCIA_DEVICE_PROD_ID12("COMPU-SHACK", "BASEline PCMCIA 10 MBit Ethernetadapter", 0xfa2e424d, 0xe9190d8a), PCMCIA_DEVICE_PROD_ID12("COMPU-SHACK", "FASTline PCMCIA 10/100 Fast-Ethernet", 0xfa2e424d, 0x3953d9b9), PCMCIA_DEVICE_PROD_ID12("CONTEC", "C-NET(PC)C-10L", 0x21cab552, 0xf6f90722), PCMCIA_DEVICE_PROD_ID12("corega", "FEther PCC-TXF", 0x0a21501a, 0xa51564a2), PCMCIA_DEVICE_PROD_ID12("corega", "Ether CF-TD", 0x0a21501a, 0x6589340a), PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega Ether CF-TD LAN Card", 0x5261440f, 0x8797663b), PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega EtherII PCC-T", 0x5261440f, 0xfa9d85bd), PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega EtherII PCC-TD", 0x5261440f, 0xc49bd73d), PCMCIA_DEVICE_PROD_ID12("Corega K.K.", "corega EtherII PCC-TD", 0xd4fdcbd8, 0xc49bd73d), PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega Ether PCC-T", 0x5261440f, 0x6705fcaa), PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega Ether PCC-TD", 0x5261440f, 0x47d5ca83), PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega FastEther PCC-TX", 0x5261440f, 0x485e85d9), PCMCIA_DEVICE_PROD_ID12("Corega,K.K.", "Ethernet LAN Card", 0x110d26d9, 0x9fd2f0a2), PCMCIA_DEVICE_PROD_ID12("corega,K.K.", "Ethernet LAN Card", 0x9791a90e, 0x9fd2f0a2), PCMCIA_DEVICE_PROD_ID12("corega K.K.", "(CG-LAPCCTXD)", 0x5261440f, 0x73ec0d88), PCMCIA_DEVICE_PROD_ID12("CouplerlessPCMCIA", "100BASE", 0xee5af0ad, 0x7c2add04), PCMCIA_DEVICE_PROD_ID12("CyQ've", "ELA-010", 0x77008979, 0x9d8d445d), PCMCIA_DEVICE_PROD_ID12("CyQ've", "ELA-110E 10/100M LAN Card", 0x77008979, 0xfd184814), PCMCIA_DEVICE_PROD_ID12("DataTrek.", "NetCard ", 0x5cd66d9d, 0x84697ce0), PCMCIA_DEVICE_PROD_ID12("Dayna Communications, Inc.", "CommuniCard E", 0x0c629325, 0xb4e7dbaf), PCMCIA_DEVICE_PROD_ID12("Digicom", "Palladio LAN 10/100", 0x697403d8, 0xe160b995), PCMCIA_DEVICE_PROD_ID12("Digicom", "Palladio LAN 10/100 Dongless", 0x697403d8, 0xa6d3b233), PCMCIA_DEVICE_PROD_ID12("DIGITAL", "DEPCM-XX", 0x69616cb3, 0xe600e76e), PCMCIA_DEVICE_PROD_ID12("D-Link", "DE-650", 0x1a424a1c, 0xf28c8398), PCMCIA_DEVICE_PROD_ID12("D-Link", "DE-660", 0x1a424a1c, 0xd9a1d05b), PCMCIA_DEVICE_PROD_ID12("D-Link", "DE-660+", 0x1a424a1c, 0x50dcd0ec), PCMCIA_DEVICE_PROD_ID12("D-Link", "DFE-650", 0x1a424a1c, 0x0f0073f9), PCMCIA_DEVICE_PROD_ID12("Dual Speed", "10/100 PC Card", 0x725b842d, 0xf1efee84), PCMCIA_DEVICE_PROD_ID12("Dual Speed", "10/100 Port Attached PC Card", 0x725b842d, 0x2db1f8e9), PCMCIA_DEVICE_PROD_ID12("Dynalink", "L10BC", 0x55632fd5, 0xdc65f2b1), PCMCIA_DEVICE_PROD_ID12("DYNALINK", "L10BC", 0x6a26d1cf, 0xdc65f2b1), PCMCIA_DEVICE_PROD_ID12("DYNALINK", "L10C", 0x6a26d1cf, 0xc4f84efb), PCMCIA_DEVICE_PROD_ID12("E-CARD", "E-CARD", 0x6701da11, 0x6701da11), PCMCIA_DEVICE_PROD_ID12("EIGER Labs Inc.", "Ethernet 10BaseT card", 0x53c864c6, 0xedd059f6), PCMCIA_DEVICE_PROD_ID12("EIGER Labs Inc.", "Ethernet Combo card", 0x53c864c6, 0x929c486c), PCMCIA_DEVICE_PROD_ID12("Ethernet", "Adapter", 0x00b2e941, 0x4b0d829e), PCMCIA_DEVICE_PROD_ID12("Ethernet Adapter", "E2000 PCMCIA Ethernet", 0x96767301, 0x71fbbc61), PCMCIA_DEVICE_PROD_ID12("Ethernet PCMCIA adapter", "EP-210", 0x8dd86181, 0xf2b52517), PCMCIA_DEVICE_PROD_ID12("Fast Ethernet", "Adapter", 0xb4be14e3, 0x4b0d829e), PCMCIA_DEVICE_PROD_ID12("Grey Cell", "GCS2000", 0x2a151fac, 0xf00555cb), PCMCIA_DEVICE_PROD_ID12("Grey Cell", "GCS2220", 0x2a151fac, 0xc1b7e327), PCMCIA_DEVICE_PROD_ID12("GVC", "NIC-2000p", 0x76e171bd, 0x6eb1c947), PCMCIA_DEVICE_PROD_ID12("IBM Corp.", "Ethernet", 0xe3736c88, 0x00b2e941), PCMCIA_DEVICE_PROD_ID12("IC-CARD", "IC-CARD", 0x60cb09a6, 0x60cb09a6), PCMCIA_DEVICE_PROD_ID12("IC-CARD+", "IC-CARD+", 0x93693494, 0x93693494), PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCETTX", 0x547e66dc, 0x6fc5459b), PCMCIA_DEVICE_PROD_ID12("iPort", "10/100 Ethernet Card", 0x56c538d2, 0x11b0ffc0), PCMCIA_DEVICE_PROD_ID12("KANSAI ELECTRIC CO.,LTD", "KLA-PCM/T", 0xb18dc3b4, 0xcc51a956), PCMCIA_DEVICE_PROD_ID12("KENTRONICS", "KEP-230", 0xaf8144c9, 0x868f6616), PCMCIA_DEVICE_PROD_ID12("KCI", "PE520 PCMCIA Ethernet Adapter", 0xa89b87d3, 0x1eb88e64), PCMCIA_DEVICE_PROD_ID12("KINGMAX", "EN10T2T", 0x7bcb459a, 0xa5c81fa5), PCMCIA_DEVICE_PROD_ID12("Kingston", "KNE-PC2", 0x1128e633, 0xce2a89b3), PCMCIA_DEVICE_PROD_ID12("Kingston Technology Corp.", "EtheRx PC Card Ethernet Adapter", 0x313c7be3, 0x0afb54a2), PCMCIA_DEVICE_PROD_ID12("Laneed", "LD-10/100CD", 0x1b7827b2, 0xcda71d1c), PCMCIA_DEVICE_PROD_ID12("Laneed", "LD-CDF", 0x1b7827b2, 0xfec71e40), PCMCIA_DEVICE_PROD_ID12("Laneed", "LD-CDL/T", 0x1b7827b2, 0x79fba4f7), PCMCIA_DEVICE_PROD_ID12("Laneed", "LD-CDS", 0x1b7827b2, 0x931afaab), PCMCIA_DEVICE_PROD_ID12("LEMEL", "LM-N89TX PRO", 0xbbefb52f, 0xd2897a97), PCMCIA_DEVICE_PROD_ID12("Linksys", "Combo PCMCIA EthernetCard (EC2T)", 0x0733cc81, 0x32ee8c78), PCMCIA_DEVICE_PROD_ID12("LINKSYS", "E-CARD", 0xf7cb0b07, 0x6701da11), PCMCIA_DEVICE_PROD_ID12("Linksys", "EtherFast 10/100 Integrated PC Card (PCM100)", 0x0733cc81, 0x453c3f9d), PCMCIA_DEVICE_PROD_ID12("Linksys", "EtherFast 10/100 PC Card (PCMPC100)", 0x0733cc81, 0x66c5a389), PCMCIA_DEVICE_PROD_ID12("Linksys", "EtherFast 10/100 PC Card (PCMPC100 V2)", 0x0733cc81, 0x3a3b28e9), PCMCIA_DEVICE_PROD_ID12("Linksys", "HomeLink Phoneline + 10/100 Network PC Card (PCM100H1)", 0x733cc81, 0x7a3e5c3a), PCMCIA_DEVICE_PROD_ID12("Logitec", "LPM-LN100TX", 0x88fcdeda, 0x6d772737), PCMCIA_DEVICE_PROD_ID12("Logitec", "LPM-LN100TE", 0x88fcdeda, 0x0e714bee), PCMCIA_DEVICE_PROD_ID12("Logitec", "LPM-LN20T", 0x88fcdeda, 0x81090922), PCMCIA_DEVICE_PROD_ID12("Logitec", "LPM-LN10TE", 0x88fcdeda, 0xc1e2521c), PCMCIA_DEVICE_PROD_ID12("LONGSHINE", "PCMCIA Ethernet Card", 0xf866b0b0, 0x6f6652e0), PCMCIA_DEVICE_PROD_ID12("MACNICA", "ME1-JEIDA", 0x20841b68, 0xaf8a3578), PCMCIA_DEVICE_PROD_ID12("Macsense", "MPC-10", 0xd830297f, 0xd265c307), PCMCIA_DEVICE_PROD_ID12("Matsushita Electric Industrial Co.,LTD.", "CF-VEL211", 0x44445376, 0x8ded41d4), PCMCIA_DEVICE_PROD_ID12("MAXTECH", "PCN2000", 0x78d64bc0, 0xca0ca4b8), PCMCIA_DEVICE_PROD_ID12("MELCO", "LPC2-T", 0x481e0094, 0xa2eb0cf3), PCMCIA_DEVICE_PROD_ID12("MELCO", "LPC2-TX", 0x481e0094, 0x41a6916c), PCMCIA_DEVICE_PROD_ID12("Microcom C.E.", "Travel Card LAN 10/100", 0x4b91cec7, 0xe70220d6), PCMCIA_DEVICE_PROD_ID12("Microdyne", "NE4200", 0x2e6da59b, 0x0478e472), PCMCIA_DEVICE_PROD_ID12("MIDORI ELEC.", "LT-PCMT", 0x648d55c1, 0xbde526c7), PCMCIA_DEVICE_PROD_ID12("National Semiconductor", "InfoMover 4100", 0x36e1191f, 0x60c229b9), PCMCIA_DEVICE_PROD_ID12("National Semiconductor", "InfoMover NE4100", 0x36e1191f, 0xa6617ec8), PCMCIA_DEVICE_PROD_ID12("NEC", "PC-9801N-J12", 0x18df0ba0, 0xbc912d76), PCMCIA_DEVICE_PROD_ID12("NETGEAR", "FA410TX", 0x9aa79dc3, 0x60e5bc0e), PCMCIA_DEVICE_PROD_ID12("Network Everywhere", "Fast Ethernet 10/100 PC Card", 0x820a67b6, 0x31ed1a5f), PCMCIA_DEVICE_PROD_ID12("NextCom K.K.", "Next Hawk", 0xaedaec74, 0xad050ef1), PCMCIA_DEVICE_PROD_ID12("PCMCIA", "10/100Mbps Ethernet Card", 0x281f1c5d, 0x6e41773b), PCMCIA_DEVICE_PROD_ID12("PCMCIA", "Ethernet", 0x281f1c5d, 0x00b2e941), PCMCIA_DEVICE_PROD_ID12("PCMCIA", "ETHERNET", 0x281f1c5d, 0x3ff7175b), PCMCIA_DEVICE_PROD_ID12("PCMCIA", "Ethernet 10BaseT Card", 0x281f1c5d, 0x4de2f6c8), PCMCIA_DEVICE_PROD_ID12("PCMCIA", "Ethernet Card", 0x281f1c5d, 0x5e9d92c0), PCMCIA_DEVICE_PROD_ID12("PCMCIA", "Ethernet Combo card", 0x281f1c5d, 0x929c486c), PCMCIA_DEVICE_PROD_ID12("PCMCIA", "ETHERNET V1.0", 0x281f1c5d, 0x4d8817c8), PCMCIA_DEVICE_PROD_ID12("PCMCIA", "FastEthernet", 0x281f1c5d, 0xfe871eeb), PCMCIA_DEVICE_PROD_ID12("PCMCIA", "Fast-Ethernet", 0x281f1c5d, 0x45f1f3b4), PCMCIA_DEVICE_PROD_ID12("PCMCIA", "FAST ETHERNET CARD", 0x281f1c5d, 0xec5dbca7), PCMCIA_DEVICE_PROD_ID12("PCMCIA LAN", "Ethernet", 0x7500e246, 0x00b2e941), PCMCIA_DEVICE_PROD_ID12("PCMCIA", "LNT-10TN", 0x281f1c5d, 0xe707f641), PCMCIA_DEVICE_PROD_ID12("PCMCIAs", "ComboCard", 0xdcfe12d3, 0xcd8906cc), PCMCIA_DEVICE_PROD_ID12("PCMCIA", "UE2212", 0x281f1c5d, 0xbf17199b), PCMCIA_DEVICE_PROD_ID12("PCMCIA", " Ethernet NE2000 Compatible", 0x281f1c5d, 0x42d5d7e1), PCMCIA_DEVICE_PROD_ID12("PRETEC", "Ethernet CompactLAN 10baseT 3.3V", 0xebf91155, 0x30074c80), PCMCIA_DEVICE_PROD_ID12("PRETEC", "Ethernet CompactLAN 10BaseT 3.3V", 0xebf91155, 0x7f5a4f50), PCMCIA_DEVICE_PROD_ID12("Psion Dacom", "Gold Card Ethernet", 0xf5f025c2, 0x3a30e110), PCMCIA_DEVICE_PROD_ID12("=RELIA==", "Ethernet", 0xcdd0644a, 0x00b2e941), PCMCIA_DEVICE_PROD_ID12("RIOS Systems Co.", "PC CARD3 ETHERNET", 0x7dd33481, 0x10b41826), PCMCIA_DEVICE_PROD_ID12("RP", "1625B Ethernet NE2000 Compatible", 0xe3e66e22, 0xb96150df), PCMCIA_DEVICE_PROD_ID12("RPTI", "EP400 Ethernet NE2000 Compatible", 0xdc6f88fd, 0x4a7e2ae0), PCMCIA_DEVICE_PROD_ID12("RPTI", "EP401 Ethernet NE2000 Compatible", 0xdc6f88fd, 0x4bcbd7fd), PCMCIA_DEVICE_PROD_ID12("RPTI LTD.", "EP400", 0xc53ac515, 0x81e39388), PCMCIA_DEVICE_PROD_ID12("SCM", "Ethernet Combo card", 0xbdc3b102, 0x929c486c), PCMCIA_DEVICE_PROD_ID12("Seiko Epson Corp.", "Ethernet", 0x09928730, 0x00b2e941), PCMCIA_DEVICE_PROD_ID12("SMC", "EZCard-10-PCMCIA", 0xc4f8b18b, 0xfb21d265), PCMCIA_DEVICE_PROD_ID12("Socket Communications Inc", "Socket EA PCMCIA LAN Adapter Revision D", 0xc70a4760, 0x2ade483e), PCMCIA_DEVICE_PROD_ID12("Socket Communications Inc", "Socket EA PCMCIA LAN Adapter Revision E", 0xc70a4760, 0x5dd978a8), PCMCIA_DEVICE_PROD_ID12("TDK", "LAK-CD031 for PCMCIA", 0x1eae9475, 0x0ed386fa), PCMCIA_DEVICE_PROD_ID12("Telecom Device K.K.", "SuperSocket RE450T", 0x466b05f0, 0x8b74bc4f), PCMCIA_DEVICE_PROD_ID12("Telecom Device K.K.", "SuperSocket RE550T", 0x466b05f0, 0x33c8db2a), PCMCIA_DEVICE_PROD_ID13("Hypertec", "EP401", 0x8787bec7, 0xf6e4a31e), PCMCIA_DEVICE_PROD_ID13("KingMax Technology Inc.", "Ethernet Card", 0x932b7189, 0x5e9d92c0), PCMCIA_DEVICE_PROD_ID13("LONGSHINE", "EP401", 0xf866b0b0, 0xf6e4a31e), PCMCIA_DEVICE_PROD_ID13("Xircom", "CFE-10", 0x2e3ee845, 0x22a49f89), PCMCIA_DEVICE_PROD_ID1("CyQ've 10 Base-T LAN CARD", 0x94faf360), PCMCIA_DEVICE_PROD_ID1("EP-210 PCMCIA LAN CARD.", 0x8850b4de), PCMCIA_DEVICE_PROD_ID1("ETHER-C16", 0x06a8514f), PCMCIA_DEVICE_PROD_ID1("NE2000 Compatible", 0x75b8ad5a), PCMCIA_DEVICE_PROD_ID2("EN-6200P2", 0xa996d078), /* too generic! */ /* PCMCIA_DEVICE_PROD_ID12("PCMCIA", "10/100 Ethernet Card", 0x281f1c5d, 0x11b0ffc0), */ PCMCIA_PFC_DEVICE_CIS_PROD_ID12(0, "PCMCIA", "EN2218-LAN/MODEM", 0x281f1c5d, 0x570f348e, "cis/PCMLM28.cis"), PCMCIA_PFC_DEVICE_CIS_PROD_ID12(0, "PCMCIA", "UE2218-LAN/MODEM", 0x281f1c5d, 0x6fdcacee, "cis/PCMLM28.cis"), PCMCIA_PFC_DEVICE_CIS_PROD_ID12(0, "Psion Dacom", "Gold Card V34 Ethernet", 0xf5f025c2, 0x338e8155, "cis/PCMLM28.cis"), PCMCIA_PFC_DEVICE_CIS_PROD_ID12(0, "Psion Dacom", "Gold Card V34 Ethernet GSM", 0xf5f025c2, 0x4ae85d35, "cis/PCMLM28.cis"), PCMCIA_PFC_DEVICE_CIS_PROD_ID12(0, "LINKSYS", "PCMLM28", 0xf7cb0b07, 0x66881874, "cis/PCMLM28.cis"), PCMCIA_PFC_DEVICE_CIS_PROD_ID12(0, "TOSHIBA", "Modem/LAN Card", 0xb4585a1a, 0x53f922f8, "cis/PCMLM28.cis"), PCMCIA_MFC_DEVICE_CIS_PROD_ID12(0, "DAYNA COMMUNICATIONS", "LAN AND MODEM MULTIFUNCTION", 0x8fdf8f89, 0xdd5ed9e8, "cis/DP83903.cis"), PCMCIA_MFC_DEVICE_CIS_PROD_ID4(0, "NSC MF LAN/Modem", 0x58fc6056, "cis/DP83903.cis"), PCMCIA_MFC_DEVICE_CIS_MANF_CARD(0, 0x0175, 0x0000, "cis/DP83903.cis"), PCMCIA_DEVICE_CIS_PROD_ID12("Allied Telesis,K.K", "Ethernet LAN Card", 0x2ad62f3c, 0x9fd2f0a2, "cis/LA-PCM.cis"), PCMCIA_DEVICE_CIS_PROD_ID12("KTI", "PE520 PLUS", 0xad180345, 0x9d58d392, "cis/PE520.cis"), PCMCIA_DEVICE_CIS_PROD_ID12("NDC", "Ethernet", 0x01c43ae1, 0x00b2e941, "cis/NE2K.cis"), PCMCIA_DEVICE_CIS_PROD_ID12("PMX ", "PE-200", 0x34f3f1c8, 0x10b59f8c, "cis/PE-200.cis"), PCMCIA_DEVICE_CIS_PROD_ID12("TAMARACK", "Ethernet", 0xcf434fba, 0x00b2e941, "cis/tamarack.cis"), PCMCIA_DEVICE_PROD_ID12("Ethernet", "CF Size PC Card", 0x00b2e941, 0x43ac239b), PCMCIA_DEVICE_PROD_ID123("Fast Ethernet", "CF Size PC Card", "1.0", 0xb4be14e3, 0x43ac239b, 0x0877b627), PCMCIA_DEVICE_NULL }; MODULE_DEVICE_TABLE(pcmcia, pcnet_ids); MODULE_FIRMWARE("cis/PCMLM28.cis"); MODULE_FIRMWARE("cis/DP83903.cis"); MODULE_FIRMWARE("cis/LA-PCM.cis"); MODULE_FIRMWARE("cis/PE520.cis"); MODULE_FIRMWARE("cis/NE2K.cis"); MODULE_FIRMWARE("cis/PE-200.cis"); MODULE_FIRMWARE("cis/tamarack.cis"); static struct pcmcia_driver pcnet_driver = { .name = "pcnet_cs", .probe = pcnet_probe, .remove = pcnet_detach, .owner = THIS_MODULE, .id_table = pcnet_ids, .suspend = pcnet_suspend, .resume = pcnet_resume, }; module_pcmcia_driver(pcnet_driver);