// SPDX-License-Identifier: GPL-2.0+ /* * Driver for ICPlus PHYs * * Copyright (c) 2007 Freescale Semiconductor, Inc. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include MODULE_DESCRIPTION("ICPlus IP175C/IP101A/IP101G/IC1001 PHY drivers"); MODULE_AUTHOR("Michael Barkowski"); MODULE_LICENSE("GPL"); /* IP101A/G - IP1001 */ #define IP10XX_SPEC_CTRL_STATUS 16 /* Spec. Control Register */ #define IP1001_RXPHASE_SEL BIT(0) /* Add delay on RX_CLK */ #define IP1001_TXPHASE_SEL BIT(1) /* Add delay on TX_CLK */ #define IP1001_SPEC_CTRL_STATUS_2 20 /* IP1001 Spec. Control Reg 2 */ #define IP1001_APS_ON 11 /* IP1001 APS Mode bit */ #define IP101A_G_APS_ON BIT(1) /* IP101A/G APS Mode bit */ #define IP101A_G_AUTO_MDIX_DIS BIT(11) #define IP101A_G_IRQ_CONF_STATUS 0x11 /* Conf Info IRQ & Status Reg */ #define IP101A_G_IRQ_PIN_USED BIT(15) /* INTR pin used */ #define IP101A_G_IRQ_ALL_MASK BIT(11) /* IRQ's inactive */ #define IP101A_G_IRQ_SPEED_CHANGE BIT(2) #define IP101A_G_IRQ_DUPLEX_CHANGE BIT(1) #define IP101A_G_IRQ_LINK_CHANGE BIT(0) #define IP101A_G_PHY_STATUS 18 #define IP101A_G_MDIX BIT(9) #define IP101A_G_PHY_SPEC_CTRL 30 #define IP101A_G_FORCE_MDIX BIT(3) #define IP101G_PAGE_CONTROL 0x14 #define IP101G_PAGE_CONTROL_MASK GENMASK(4, 0) #define IP101G_DIGITAL_IO_SPEC_CTRL 0x1d #define IP101G_DIGITAL_IO_SPEC_CTRL_SEL_INTR32 BIT(2) #define IP101G_DEFAULT_PAGE 16 #define IP101G_P1_CNT_CTRL 17 #define CNT_CTRL_RX_EN BIT(13) #define IP101G_P8_CNT_CTRL 17 #define CNT_CTRL_RDCLR_EN BIT(15) #define IP101G_CNT_REG 18 #define IP175C_PHY_ID 0x02430d80 #define IP1001_PHY_ID 0x02430d90 #define IP101A_PHY_ID 0x02430c54 /* The 32-pin IP101GR package can re-configure the mode of the RXER/INTR_32 pin * (pin number 21). The hardware default is RXER (receive error) mode. But it * can be configured to interrupt mode manually. */ enum ip101gr_sel_intr32 { IP101GR_SEL_INTR32_KEEP, IP101GR_SEL_INTR32_INTR, IP101GR_SEL_INTR32_RXER, }; struct ip101g_hw_stat { const char *name; int page; }; static struct ip101g_hw_stat ip101g_hw_stats[] = { { "phy_crc_errors", 1 }, { "phy_symbol_errors", 11, }, }; struct ip101a_g_phy_priv { enum ip101gr_sel_intr32 sel_intr32; u64 stats[ARRAY_SIZE(ip101g_hw_stats)]; }; static int ip175c_config_init(struct phy_device *phydev) { int err, i; static int full_reset_performed; if (full_reset_performed == 0) { /* master reset */ err = mdiobus_write(phydev->mdio.bus, 30, 0, 0x175c); if (err < 0) return err; /* ensure no bus delays overlap reset period */ err = mdiobus_read(phydev->mdio.bus, 30, 0); /* data sheet specifies reset period is 2 msec */ mdelay(2); /* enable IP175C mode */ err = mdiobus_write(phydev->mdio.bus, 29, 31, 0x175c); if (err < 0) return err; /* Set MII0 speed and duplex (in PHY mode) */ err = mdiobus_write(phydev->mdio.bus, 29, 22, 0x420); if (err < 0) return err; /* reset switch ports */ for (i = 0; i < 5; i++) { err = mdiobus_write(phydev->mdio.bus, i, MII_BMCR, BMCR_RESET); if (err < 0) return err; } for (i = 0; i < 5; i++) err = mdiobus_read(phydev->mdio.bus, i, MII_BMCR); mdelay(2); full_reset_performed = 1; } if (phydev->mdio.addr != 4) { phydev->state = PHY_RUNNING; phydev->speed = SPEED_100; phydev->duplex = DUPLEX_FULL; phydev->link = 1; netif_carrier_on(phydev->attached_dev); } return 0; } static int ip1001_config_init(struct phy_device *phydev) { int c; /* Enable Auto Power Saving mode */ c = phy_read(phydev, IP1001_SPEC_CTRL_STATUS_2); if (c < 0) return c; c |= IP1001_APS_ON; c = phy_write(phydev, IP1001_SPEC_CTRL_STATUS_2, c); if (c < 0) return c; if (phy_interface_is_rgmii(phydev)) { c = phy_read(phydev, IP10XX_SPEC_CTRL_STATUS); if (c < 0) return c; c &= ~(IP1001_RXPHASE_SEL | IP1001_TXPHASE_SEL); if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) c |= (IP1001_RXPHASE_SEL | IP1001_TXPHASE_SEL); else if (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID) c |= IP1001_RXPHASE_SEL; else if (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID) c |= IP1001_TXPHASE_SEL; c = phy_write(phydev, IP10XX_SPEC_CTRL_STATUS, c); if (c < 0) return c; } return 0; } static int ip175c_read_status(struct phy_device *phydev) { if (phydev->mdio.addr == 4) /* WAN port */ genphy_read_status(phydev); else /* Don't need to read status for switch ports */ phydev->irq = PHY_MAC_INTERRUPT; return 0; } static int ip175c_config_aneg(struct phy_device *phydev) { if (phydev->mdio.addr == 4) /* WAN port */ genphy_config_aneg(phydev); return 0; } static int ip101a_g_probe(struct phy_device *phydev) { struct device *dev = &phydev->mdio.dev; struct ip101a_g_phy_priv *priv; priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); if (!priv) return -ENOMEM; /* Both functions (RX error and interrupt status) are sharing the same * pin on the 32-pin IP101GR, so this is an exclusive choice. */ if (device_property_read_bool(dev, "icplus,select-rx-error") && device_property_read_bool(dev, "icplus,select-interrupt")) { dev_err(dev, "RXER and INTR mode cannot be selected together\n"); return -EINVAL; } if (device_property_read_bool(dev, "icplus,select-rx-error")) priv->sel_intr32 = IP101GR_SEL_INTR32_RXER; else if (device_property_read_bool(dev, "icplus,select-interrupt")) priv->sel_intr32 = IP101GR_SEL_INTR32_INTR; else priv->sel_intr32 = IP101GR_SEL_INTR32_KEEP; phydev->priv = priv; return 0; } static int ip101a_g_config_intr_pin(struct phy_device *phydev) { struct ip101a_g_phy_priv *priv = phydev->priv; int oldpage, err = 0; oldpage = phy_select_page(phydev, IP101G_DEFAULT_PAGE); if (oldpage < 0) goto out; /* configure the RXER/INTR_32 pin of the 32-pin IP101GR if needed: */ switch (priv->sel_intr32) { case IP101GR_SEL_INTR32_RXER: err = __phy_modify(phydev, IP101G_DIGITAL_IO_SPEC_CTRL, IP101G_DIGITAL_IO_SPEC_CTRL_SEL_INTR32, 0); if (err < 0) goto out; break; case IP101GR_SEL_INTR32_INTR: err = __phy_modify(phydev, IP101G_DIGITAL_IO_SPEC_CTRL, IP101G_DIGITAL_IO_SPEC_CTRL_SEL_INTR32, IP101G_DIGITAL_IO_SPEC_CTRL_SEL_INTR32); if (err < 0) goto out; break; default: /* Don't touch IP101G_DIGITAL_IO_SPEC_CTRL because it's not * documented on IP101A and it's not clear whether this would * cause problems. * For the 32-pin IP101GR we simply keep the SEL_INTR32 * configuration as set by the bootloader when not configured * to one of the special functions. */ break; } out: return phy_restore_page(phydev, oldpage, err); } static int ip101a_config_init(struct phy_device *phydev) { int ret; /* Enable Auto Power Saving mode */ ret = phy_set_bits(phydev, IP10XX_SPEC_CTRL_STATUS, IP101A_G_APS_ON); if (ret) return ret; return ip101a_g_config_intr_pin(phydev); } static int ip101g_config_init(struct phy_device *phydev) { int ret; /* Enable the PHY counters */ ret = phy_modify_paged(phydev, 1, IP101G_P1_CNT_CTRL, CNT_CTRL_RX_EN, CNT_CTRL_RX_EN); if (ret) return ret; /* Clear error counters on read */ ret = phy_modify_paged(phydev, 8, IP101G_P8_CNT_CTRL, CNT_CTRL_RDCLR_EN, CNT_CTRL_RDCLR_EN); if (ret) return ret; return ip101a_g_config_intr_pin(phydev); } static int ip101a_g_read_status(struct phy_device *phydev) { int oldpage, ret, stat1, stat2; ret = genphy_read_status(phydev); if (ret) return ret; oldpage = phy_select_page(phydev, IP101G_DEFAULT_PAGE); if (oldpage < 0) goto out; ret = __phy_read(phydev, IP10XX_SPEC_CTRL_STATUS); if (ret < 0) goto out; stat1 = ret; ret = __phy_read(phydev, IP101A_G_PHY_SPEC_CTRL); if (ret < 0) goto out; stat2 = ret; if (stat1 & IP101A_G_AUTO_MDIX_DIS) { if (stat2 & IP101A_G_FORCE_MDIX) phydev->mdix_ctrl = ETH_TP_MDI_X; else phydev->mdix_ctrl = ETH_TP_MDI; } else { phydev->mdix_ctrl = ETH_TP_MDI_AUTO; } if (stat2 & IP101A_G_MDIX) phydev->mdix = ETH_TP_MDI_X; else phydev->mdix = ETH_TP_MDI; ret = 0; out: return phy_restore_page(phydev, oldpage, ret); } static int ip101a_g_config_mdix(struct phy_device *phydev) { u16 ctrl = 0, ctrl2 = 0; int oldpage; int ret = 0; switch (phydev->mdix_ctrl) { case ETH_TP_MDI: ctrl = IP101A_G_AUTO_MDIX_DIS; break; case ETH_TP_MDI_X: ctrl = IP101A_G_AUTO_MDIX_DIS; ctrl2 = IP101A_G_FORCE_MDIX; break; case ETH_TP_MDI_AUTO: break; default: return 0; } oldpage = phy_select_page(phydev, IP101G_DEFAULT_PAGE); if (oldpage < 0) goto out; ret = __phy_modify(phydev, IP10XX_SPEC_CTRL_STATUS, IP101A_G_AUTO_MDIX_DIS, ctrl); if (ret) goto out; ret = __phy_modify(phydev, IP101A_G_PHY_SPEC_CTRL, IP101A_G_FORCE_MDIX, ctrl2); out: return phy_restore_page(phydev, oldpage, ret); } static int ip101a_g_config_aneg(struct phy_device *phydev) { int ret; ret = ip101a_g_config_mdix(phydev); if (ret) return ret; return genphy_config_aneg(phydev); } static int ip101a_g_ack_interrupt(struct phy_device *phydev) { int err; err = phy_read_paged(phydev, IP101G_DEFAULT_PAGE, IP101A_G_IRQ_CONF_STATUS); if (err < 0) return err; return 0; } static int ip101a_g_config_intr(struct phy_device *phydev) { u16 val; int err; if (phydev->interrupts == PHY_INTERRUPT_ENABLED) { err = ip101a_g_ack_interrupt(phydev); if (err) return err; /* INTR pin used: Speed/link/duplex will cause an interrupt */ val = IP101A_G_IRQ_PIN_USED; err = phy_write_paged(phydev, IP101G_DEFAULT_PAGE, IP101A_G_IRQ_CONF_STATUS, val); } else { val = IP101A_G_IRQ_ALL_MASK; err = phy_write_paged(phydev, IP101G_DEFAULT_PAGE, IP101A_G_IRQ_CONF_STATUS, val); if (err) return err; err = ip101a_g_ack_interrupt(phydev); } return err; } static irqreturn_t ip101a_g_handle_interrupt(struct phy_device *phydev) { int irq_status; irq_status = phy_read_paged(phydev, IP101G_DEFAULT_PAGE, IP101A_G_IRQ_CONF_STATUS); if (irq_status < 0) { phy_error(phydev); return IRQ_NONE; } if (!(irq_status & (IP101A_G_IRQ_SPEED_CHANGE | IP101A_G_IRQ_DUPLEX_CHANGE | IP101A_G_IRQ_LINK_CHANGE))) return IRQ_NONE; phy_trigger_machine(phydev); return IRQ_HANDLED; } /* The IP101A doesn't really have a page register. We just pretend to have one * so we can use the paged versions of the callbacks of the IP101G. */ static int ip101a_read_page(struct phy_device *phydev) { return IP101G_DEFAULT_PAGE; } static int ip101a_write_page(struct phy_device *phydev, int page) { WARN_ONCE(page != IP101G_DEFAULT_PAGE, "wrong page selected\n"); return 0; } static int ip101g_read_page(struct phy_device *phydev) { return __phy_read(phydev, IP101G_PAGE_CONTROL); } static int ip101g_write_page(struct phy_device *phydev, int page) { return __phy_write(phydev, IP101G_PAGE_CONTROL, page); } static int ip101a_g_has_page_register(struct phy_device *phydev) { int oldval, val, ret; oldval = phy_read(phydev, IP101G_PAGE_CONTROL); if (oldval < 0) return oldval; ret = phy_write(phydev, IP101G_PAGE_CONTROL, 0xffff); if (ret) return ret; val = phy_read(phydev, IP101G_PAGE_CONTROL); if (val < 0) return val; ret = phy_write(phydev, IP101G_PAGE_CONTROL, oldval); if (ret) return ret; return val == IP101G_PAGE_CONTROL_MASK; } static int ip101a_g_match_phy_device(struct phy_device *phydev, bool ip101a) { int ret; if (phydev->phy_id != IP101A_PHY_ID) return 0; /* The IP101A and the IP101G share the same PHY identifier.The IP101G * seems to be a successor of the IP101A and implements more functions. * Amongst other things there is a page select register, which is not * available on the IP101A. Use this to distinguish these two. */ ret = ip101a_g_has_page_register(phydev); if (ret < 0) return ret; return ip101a == !ret; } static int ip101a_match_phy_device(struct phy_device *phydev) { return ip101a_g_match_phy_device(phydev, true); } static int ip101g_match_phy_device(struct phy_device *phydev) { return ip101a_g_match_phy_device(phydev, false); } static int ip101g_get_sset_count(struct phy_device *phydev) { return ARRAY_SIZE(ip101g_hw_stats); } static void ip101g_get_strings(struct phy_device *phydev, u8 *data) { int i; for (i = 0; i < ARRAY_SIZE(ip101g_hw_stats); i++) strscpy(data + i * ETH_GSTRING_LEN, ip101g_hw_stats[i].name, ETH_GSTRING_LEN); } static u64 ip101g_get_stat(struct phy_device *phydev, int i) { struct ip101g_hw_stat stat = ip101g_hw_stats[i]; struct ip101a_g_phy_priv *priv = phydev->priv; int val; u64 ret; val = phy_read_paged(phydev, stat.page, IP101G_CNT_REG); if (val < 0) { ret = U64_MAX; } else { priv->stats[i] += val; ret = priv->stats[i]; } return ret; } static void ip101g_get_stats(struct phy_device *phydev, struct ethtool_stats *stats, u64 *data) { int i; for (i = 0; i < ARRAY_SIZE(ip101g_hw_stats); i++) data[i] = ip101g_get_stat(phydev, i); } static struct phy_driver icplus_driver[] = { { PHY_ID_MATCH_MODEL(IP175C_PHY_ID), .name = "ICPlus IP175C", /* PHY_BASIC_FEATURES */ .config_init = ip175c_config_init, .config_aneg = ip175c_config_aneg, .read_status = ip175c_read_status, .suspend = genphy_suspend, .resume = genphy_resume, }, { PHY_ID_MATCH_MODEL(IP1001_PHY_ID), .name = "ICPlus IP1001", /* PHY_GBIT_FEATURES */ .config_init = ip1001_config_init, .soft_reset = genphy_soft_reset, .suspend = genphy_suspend, .resume = genphy_resume, }, { .name = "ICPlus IP101A", .match_phy_device = ip101a_match_phy_device, .probe = ip101a_g_probe, .read_page = ip101a_read_page, .write_page = ip101a_write_page, .config_intr = ip101a_g_config_intr, .handle_interrupt = ip101a_g_handle_interrupt, .config_init = ip101a_config_init, .config_aneg = ip101a_g_config_aneg, .read_status = ip101a_g_read_status, .soft_reset = genphy_soft_reset, .suspend = genphy_suspend, .resume = genphy_resume, }, { .name = "ICPlus IP101G", .match_phy_device = ip101g_match_phy_device, .probe = ip101a_g_probe, .read_page = ip101g_read_page, .write_page = ip101g_write_page, .config_intr = ip101a_g_config_intr, .handle_interrupt = ip101a_g_handle_interrupt, .config_init = ip101g_config_init, .config_aneg = ip101a_g_config_aneg, .read_status = ip101a_g_read_status, .soft_reset = genphy_soft_reset, .get_sset_count = ip101g_get_sset_count, .get_strings = ip101g_get_strings, .get_stats = ip101g_get_stats, .suspend = genphy_suspend, .resume = genphy_resume, } }; module_phy_driver(icplus_driver); static struct mdio_device_id __maybe_unused icplus_tbl[] = { { PHY_ID_MATCH_MODEL(IP175C_PHY_ID) }, { PHY_ID_MATCH_MODEL(IP1001_PHY_ID) }, { PHY_ID_MATCH_EXACT(IP101A_PHY_ID) }, { } }; MODULE_DEVICE_TABLE(mdio, icplus_tbl);