/* * Copyright (c) 2005-2011 Atheros Communications Inc. * Copyright (c) 2011-2017 Qualcomm Atheros, Inc. * * Permission to use, copy, modify, and/or distribute this software for any * purpose with or without fee is hereby granted, provided that the above * copyright notice and this permission notice appear in all copies. * * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */ #ifndef _HW_H_ #define _HW_H_ #include "targaddrs.h" #define ATH10K_FW_DIR "ath10k" #define QCA988X_2_0_DEVICE_ID_UBNT (0x11ac) #define QCA988X_2_0_DEVICE_ID (0x003c) #define QCA6164_2_1_DEVICE_ID (0x0041) #define QCA6174_2_1_DEVICE_ID (0x003e) #define QCA99X0_2_0_DEVICE_ID (0x0040) #define QCA9888_2_0_DEVICE_ID (0x0056) #define QCA9984_1_0_DEVICE_ID (0x0046) #define QCA9377_1_0_DEVICE_ID (0x0042) #define QCA9887_1_0_DEVICE_ID (0x0050) /* QCA988X 1.0 definitions (unsupported) */ #define QCA988X_HW_1_0_CHIP_ID_REV 0x0 /* QCA988X 2.0 definitions */ #define QCA988X_HW_2_0_VERSION 0x4100016c #define QCA988X_HW_2_0_CHIP_ID_REV 0x2 #define QCA988X_HW_2_0_FW_DIR ATH10K_FW_DIR "/QCA988X/hw2.0" #define QCA988X_HW_2_0_BOARD_DATA_FILE "board.bin" #define QCA988X_HW_2_0_PATCH_LOAD_ADDR 0x1234 /* QCA9887 1.0 definitions */ #define QCA9887_HW_1_0_VERSION 0x4100016d #define QCA9887_HW_1_0_CHIP_ID_REV 0 #define QCA9887_HW_1_0_FW_DIR ATH10K_FW_DIR "/QCA9887/hw1.0" #define QCA9887_HW_1_0_BOARD_DATA_FILE "board.bin" #define QCA9887_HW_1_0_PATCH_LOAD_ADDR 0x1234 /* QCA6174 target BMI version signatures */ #define QCA6174_HW_1_0_VERSION 0x05000000 #define QCA6174_HW_1_1_VERSION 0x05000001 #define QCA6174_HW_1_3_VERSION 0x05000003 #define QCA6174_HW_2_1_VERSION 0x05010000 #define QCA6174_HW_3_0_VERSION 0x05020000 #define QCA6174_HW_3_2_VERSION 0x05030000 /* QCA9377 target BMI version signatures */ #define QCA9377_HW_1_0_DEV_VERSION 0x05020000 #define QCA9377_HW_1_1_DEV_VERSION 0x05020001 enum qca6174_pci_rev { QCA6174_PCI_REV_1_1 = 0x11, QCA6174_PCI_REV_1_3 = 0x13, QCA6174_PCI_REV_2_0 = 0x20, QCA6174_PCI_REV_3_0 = 0x30, }; enum qca6174_chip_id_rev { QCA6174_HW_1_0_CHIP_ID_REV = 0, QCA6174_HW_1_1_CHIP_ID_REV = 1, QCA6174_HW_1_3_CHIP_ID_REV = 2, QCA6174_HW_2_1_CHIP_ID_REV = 4, QCA6174_HW_2_2_CHIP_ID_REV = 5, QCA6174_HW_3_0_CHIP_ID_REV = 8, QCA6174_HW_3_1_CHIP_ID_REV = 9, QCA6174_HW_3_2_CHIP_ID_REV = 10, }; enum qca9377_chip_id_rev { QCA9377_HW_1_0_CHIP_ID_REV = 0x0, QCA9377_HW_1_1_CHIP_ID_REV = 0x1, }; #define QCA6174_HW_2_1_FW_DIR "ath10k/QCA6174/hw2.1" #define QCA6174_HW_2_1_BOARD_DATA_FILE "board.bin" #define QCA6174_HW_2_1_PATCH_LOAD_ADDR 0x1234 #define QCA6174_HW_3_0_FW_DIR "ath10k/QCA6174/hw3.0" #define QCA6174_HW_3_0_BOARD_DATA_FILE "board.bin" #define QCA6174_HW_3_0_PATCH_LOAD_ADDR 0x1234 /* QCA99X0 1.0 definitions (unsupported) */ #define QCA99X0_HW_1_0_CHIP_ID_REV 0x0 /* QCA99X0 2.0 definitions */ #define QCA99X0_HW_2_0_DEV_VERSION 0x01000000 #define QCA99X0_HW_2_0_CHIP_ID_REV 0x1 #define QCA99X0_HW_2_0_FW_DIR ATH10K_FW_DIR "/QCA99X0/hw2.0" #define QCA99X0_HW_2_0_BOARD_DATA_FILE "board.bin" #define QCA99X0_HW_2_0_PATCH_LOAD_ADDR 0x1234 /* QCA9984 1.0 defines */ #define QCA9984_HW_1_0_DEV_VERSION 0x1000000 #define QCA9984_HW_DEV_TYPE 0xa #define QCA9984_HW_1_0_CHIP_ID_REV 0x0 #define QCA9984_HW_1_0_FW_DIR ATH10K_FW_DIR "/QCA9984/hw1.0" #define QCA9984_HW_1_0_BOARD_DATA_FILE "board.bin" #define QCA9984_HW_1_0_PATCH_LOAD_ADDR 0x1234 /* QCA9888 2.0 defines */ #define QCA9888_HW_2_0_DEV_VERSION 0x1000000 #define QCA9888_HW_DEV_TYPE 0xc #define QCA9888_HW_2_0_CHIP_ID_REV 0x0 #define QCA9888_HW_2_0_FW_DIR ATH10K_FW_DIR "/QCA9888/hw2.0" #define QCA9888_HW_2_0_BOARD_DATA_FILE "board.bin" #define QCA9888_HW_2_0_PATCH_LOAD_ADDR 0x1234 /* QCA9377 1.0 definitions */ #define QCA9377_HW_1_0_FW_DIR ATH10K_FW_DIR "/QCA9377/hw1.0" #define QCA9377_HW_1_0_BOARD_DATA_FILE "board.bin" #define QCA9377_HW_1_0_PATCH_LOAD_ADDR 0x1234 /* QCA4019 1.0 definitions */ #define QCA4019_HW_1_0_DEV_VERSION 0x01000000 #define QCA4019_HW_1_0_FW_DIR ATH10K_FW_DIR "/QCA4019/hw1.0" #define QCA4019_HW_1_0_BOARD_DATA_FILE "board.bin" #define QCA4019_HW_1_0_PATCH_LOAD_ADDR 0x1234 /* WCN3990 1.0 definitions */ #define WCN3990_HW_1_0_DEV_VERSION ATH10K_HW_WCN3990 #define WCN3990_HW_1_0_FW_DIR ATH10K_FW_DIR "/WCN3990/hw3.0" #define ATH10K_FW_FILE_BASE "firmware" #define ATH10K_FW_API_MAX 6 #define ATH10K_FW_API_MIN 2 #define ATH10K_FW_API2_FILE "firmware-2.bin" #define ATH10K_FW_API3_FILE "firmware-3.bin" /* added support for ATH10K_FW_IE_WMI_OP_VERSION */ #define ATH10K_FW_API4_FILE "firmware-4.bin" /* HTT id conflict fix for management frames over HTT */ #define ATH10K_FW_API5_FILE "firmware-5.bin" /* the firmware-6.bin blob */ #define ATH10K_FW_API6_FILE "firmware-6.bin" #define ATH10K_FW_UTF_FILE "utf.bin" #define ATH10K_FW_UTF_API2_FILE "utf-2.bin" /* includes also the null byte */ #define ATH10K_FIRMWARE_MAGIC "QCA-ATH10K" #define ATH10K_BOARD_MAGIC "QCA-ATH10K-BOARD" #define ATH10K_BOARD_API2_FILE "board-2.bin" #define REG_DUMP_COUNT_QCA988X 60 struct ath10k_fw_ie { __le32 id; __le32 len; u8 data[0]; }; enum ath10k_fw_ie_type { ATH10K_FW_IE_FW_VERSION = 0, ATH10K_FW_IE_TIMESTAMP = 1, ATH10K_FW_IE_FEATURES = 2, ATH10K_FW_IE_FW_IMAGE = 3, ATH10K_FW_IE_OTP_IMAGE = 4, /* WMI "operations" interface version, 32 bit value. Supported from * FW API 4 and above. */ ATH10K_FW_IE_WMI_OP_VERSION = 5, /* HTT "operations" interface version, 32 bit value. Supported from * FW API 5 and above. */ ATH10K_FW_IE_HTT_OP_VERSION = 6, /* Code swap image for firmware binary */ ATH10K_FW_IE_FW_CODE_SWAP_IMAGE = 7, }; enum ath10k_fw_wmi_op_version { ATH10K_FW_WMI_OP_VERSION_UNSET = 0, ATH10K_FW_WMI_OP_VERSION_MAIN = 1, ATH10K_FW_WMI_OP_VERSION_10_1 = 2, ATH10K_FW_WMI_OP_VERSION_10_2 = 3, ATH10K_FW_WMI_OP_VERSION_TLV = 4, ATH10K_FW_WMI_OP_VERSION_10_2_4 = 5, ATH10K_FW_WMI_OP_VERSION_10_4 = 6, /* keep last */ ATH10K_FW_WMI_OP_VERSION_MAX, }; enum ath10k_fw_htt_op_version { ATH10K_FW_HTT_OP_VERSION_UNSET = 0, ATH10K_FW_HTT_OP_VERSION_MAIN = 1, /* also used in 10.2 and 10.2.4 branches */ ATH10K_FW_HTT_OP_VERSION_10_1 = 2, ATH10K_FW_HTT_OP_VERSION_TLV = 3, ATH10K_FW_HTT_OP_VERSION_10_4 = 4, /* keep last */ ATH10K_FW_HTT_OP_VERSION_MAX, }; enum ath10k_bd_ie_type { /* contains sub IEs of enum ath10k_bd_ie_board_type */ ATH10K_BD_IE_BOARD = 0, }; enum ath10k_bd_ie_board_type { ATH10K_BD_IE_BOARD_NAME = 0, ATH10K_BD_IE_BOARD_DATA = 1, }; enum ath10k_hw_rev { ATH10K_HW_QCA988X, ATH10K_HW_QCA6174, ATH10K_HW_QCA99X0, ATH10K_HW_QCA9888, ATH10K_HW_QCA9984, ATH10K_HW_QCA9377, ATH10K_HW_QCA4019, ATH10K_HW_QCA9887, ATH10K_HW_WCN3990, }; struct ath10k_hw_regs { u32 rtc_soc_base_address; u32 rtc_wmac_base_address; u32 soc_core_base_address; u32 wlan_mac_base_address; u32 ce_wrapper_base_address; u32 ce0_base_address; u32 ce1_base_address; u32 ce2_base_address; u32 ce3_base_address; u32 ce4_base_address; u32 ce5_base_address; u32 ce6_base_address; u32 ce7_base_address; u32 ce8_base_address; u32 ce9_base_address; u32 ce10_base_address; u32 ce11_base_address; u32 soc_reset_control_si0_rst_mask; u32 soc_reset_control_ce_rst_mask; u32 soc_chip_id_address; u32 scratch_3_address; u32 fw_indicator_address; u32 pcie_local_base_address; u32 ce_wrap_intr_sum_host_msi_lsb; u32 ce_wrap_intr_sum_host_msi_mask; u32 pcie_intr_fw_mask; u32 pcie_intr_ce_mask_all; u32 pcie_intr_clr_address; u32 cpu_pll_init_address; u32 cpu_speed_address; u32 core_clk_div_address; }; extern const struct ath10k_hw_regs qca988x_regs; extern const struct ath10k_hw_regs qca6174_regs; extern const struct ath10k_hw_regs qca99x0_regs; extern const struct ath10k_hw_regs qca4019_regs; extern const struct ath10k_hw_regs wcn3990_regs; struct ath10k_hw_ce_regs_addr_map { u32 msb; u32 lsb; u32 mask; }; struct ath10k_hw_ce_ctrl1 { u32 addr; u32 hw_mask; u32 sw_mask; u32 hw_wr_mask; u32 sw_wr_mask; u32 reset_mask; u32 reset; struct ath10k_hw_ce_regs_addr_map *src_ring; struct ath10k_hw_ce_regs_addr_map *dst_ring; struct ath10k_hw_ce_regs_addr_map *dmax; }; struct ath10k_hw_ce_cmd_halt { u32 status_reset; u32 msb; u32 mask; struct ath10k_hw_ce_regs_addr_map *status; }; struct ath10k_hw_ce_host_ie { u32 copy_complete_reset; struct ath10k_hw_ce_regs_addr_map *copy_complete; }; struct ath10k_hw_ce_host_wm_regs { u32 dstr_lmask; u32 dstr_hmask; u32 srcr_lmask; u32 srcr_hmask; u32 cc_mask; u32 wm_mask; u32 addr; }; struct ath10k_hw_ce_misc_regs { u32 axi_err; u32 dstr_add_err; u32 srcr_len_err; u32 dstr_mlen_vio; u32 dstr_overflow; u32 srcr_overflow; u32 err_mask; u32 addr; }; struct ath10k_hw_ce_dst_src_wm_regs { u32 addr; u32 low_rst; u32 high_rst; struct ath10k_hw_ce_regs_addr_map *wm_low; struct ath10k_hw_ce_regs_addr_map *wm_high; }; struct ath10k_hw_ce_regs { u32 sr_base_addr; u32 sr_size_addr; u32 dr_base_addr; u32 dr_size_addr; u32 ce_cmd_addr; u32 misc_ie_addr; u32 sr_wr_index_addr; u32 dst_wr_index_addr; u32 current_srri_addr; u32 current_drri_addr; u32 ddr_addr_for_rri_low; u32 ddr_addr_for_rri_high; u32 ce_rri_low; u32 ce_rri_high; u32 host_ie_addr; struct ath10k_hw_ce_host_wm_regs *wm_regs; struct ath10k_hw_ce_misc_regs *misc_regs; struct ath10k_hw_ce_ctrl1 *ctrl1_regs; struct ath10k_hw_ce_cmd_halt *cmd_halt; struct ath10k_hw_ce_host_ie *host_ie; struct ath10k_hw_ce_dst_src_wm_regs *wm_srcr; struct ath10k_hw_ce_dst_src_wm_regs *wm_dstr; }; struct ath10k_hw_values { u32 rtc_state_val_on; u8 ce_count; u8 msi_assign_ce_max; u8 num_target_ce_config_wlan; u16 ce_desc_meta_data_mask; u8 ce_desc_meta_data_lsb; }; extern const struct ath10k_hw_values qca988x_values; extern const struct ath10k_hw_values qca6174_values; extern const struct ath10k_hw_values qca99x0_values; extern const struct ath10k_hw_values qca9888_values; extern const struct ath10k_hw_values qca4019_values; extern const struct ath10k_hw_values wcn3990_values; extern const struct ath10k_hw_ce_regs wcn3990_ce_regs; extern const struct ath10k_hw_ce_regs qcax_ce_regs; void ath10k_hw_fill_survey_time(struct ath10k *ar, struct survey_info *survey, u32 cc, u32 rcc, u32 cc_prev, u32 rcc_prev); #define QCA_REV_988X(ar) ((ar)->hw_rev == ATH10K_HW_QCA988X) #define QCA_REV_9887(ar) ((ar)->hw_rev == ATH10K_HW_QCA9887) #define QCA_REV_6174(ar) ((ar)->hw_rev == ATH10K_HW_QCA6174) #define QCA_REV_99X0(ar) ((ar)->hw_rev == ATH10K_HW_QCA99X0) #define QCA_REV_9888(ar) ((ar)->hw_rev == ATH10K_HW_QCA9888) #define QCA_REV_9984(ar) ((ar)->hw_rev == ATH10K_HW_QCA9984) #define QCA_REV_9377(ar) ((ar)->hw_rev == ATH10K_HW_QCA9377) #define QCA_REV_40XX(ar) ((ar)->hw_rev == ATH10K_HW_QCA4019) #define QCA_REV_WCN3990(ar) ((ar)->hw_rev == ATH10K_HW_WCN3990) /* Known peculiarities: * - raw appears in nwifi decap, raw and nwifi appear in ethernet decap * - raw have FCS, nwifi doesn't * - ethernet frames have 802.11 header decapped and parts (base hdr, cipher * param, llc/snap) are aligned to 4byte boundaries each */ enum ath10k_hw_txrx_mode { ATH10K_HW_TXRX_RAW = 0, /* Native Wifi decap mode is used to align IP frames to 4-byte * boundaries and avoid a very expensive re-alignment in mac80211. */ ATH10K_HW_TXRX_NATIVE_WIFI = 1, ATH10K_HW_TXRX_ETHERNET = 2, /* Valid for HTT >= 3.0. Used for management frames in TX_FRM. */ ATH10K_HW_TXRX_MGMT = 3, }; enum ath10k_mcast2ucast_mode { ATH10K_MCAST2UCAST_DISABLED = 0, ATH10K_MCAST2UCAST_ENABLED = 1, }; enum ath10k_hw_rate_ofdm { ATH10K_HW_RATE_OFDM_48M = 0, ATH10K_HW_RATE_OFDM_24M, ATH10K_HW_RATE_OFDM_12M, ATH10K_HW_RATE_OFDM_6M, ATH10K_HW_RATE_OFDM_54M, ATH10K_HW_RATE_OFDM_36M, ATH10K_HW_RATE_OFDM_18M, ATH10K_HW_RATE_OFDM_9M, }; enum ath10k_hw_rate_cck { ATH10K_HW_RATE_CCK_LP_11M = 0, ATH10K_HW_RATE_CCK_LP_5_5M, ATH10K_HW_RATE_CCK_LP_2M, ATH10K_HW_RATE_CCK_LP_1M, ATH10K_HW_RATE_CCK_SP_11M, ATH10K_HW_RATE_CCK_SP_5_5M, ATH10K_HW_RATE_CCK_SP_2M, }; enum ath10k_hw_rate_rev2_cck { ATH10K_HW_RATE_REV2_CCK_LP_1M = 1, ATH10K_HW_RATE_REV2_CCK_LP_2M, ATH10K_HW_RATE_REV2_CCK_LP_5_5M, ATH10K_HW_RATE_REV2_CCK_LP_11M, ATH10K_HW_RATE_REV2_CCK_SP_2M, ATH10K_HW_RATE_REV2_CCK_SP_5_5M, ATH10K_HW_RATE_REV2_CCK_SP_11M, }; enum ath10k_hw_cc_wraparound_type { ATH10K_HW_CC_WRAP_DISABLED = 0, /* This type is when the HW chip has a quirky Cycle Counter * wraparound which resets to 0x7fffffff instead of 0. All * other CC related counters (e.g. Rx Clear Count) are divided * by 2 so they never wraparound themselves. */ ATH10K_HW_CC_WRAP_SHIFTED_ALL = 1, /* Each hw counter wrapsaround independently. When the * counter overflows the repestive counter is right shifted * by 1, i.e reset to 0x7fffffff, and other counters will be * running unaffected. In this type of wraparound, it should * be possible to report accurate Rx busy time unlike the * first type. */ ATH10K_HW_CC_WRAP_SHIFTED_EACH = 2, }; enum ath10k_hw_refclk_speed { ATH10K_HW_REFCLK_UNKNOWN = -1, ATH10K_HW_REFCLK_48_MHZ = 0, ATH10K_HW_REFCLK_19_2_MHZ = 1, ATH10K_HW_REFCLK_24_MHZ = 2, ATH10K_HW_REFCLK_26_MHZ = 3, ATH10K_HW_REFCLK_37_4_MHZ = 4, ATH10K_HW_REFCLK_38_4_MHZ = 5, ATH10K_HW_REFCLK_40_MHZ = 6, ATH10K_HW_REFCLK_52_MHZ = 7, /* must be the last one */ ATH10K_HW_REFCLK_COUNT, }; struct ath10k_hw_clk_params { u32 refclk; u32 div; u32 rnfrac; u32 settle_time; u32 refdiv; u32 outdiv; }; struct ath10k_hw_params { u32 id; u16 dev_id; const char *name; u32 patch_load_addr; int uart_pin; u32 otp_exe_param; /* Type of hw cycle counter wraparound logic, for more info * refer enum ath10k_hw_cc_wraparound_type. */ enum ath10k_hw_cc_wraparound_type cc_wraparound_type; /* Some of chip expects fragment descriptor to be continuous * memory for any TX operation. Set continuous_frag_desc flag * for the hardware which have such requirement. */ bool continuous_frag_desc; /* CCK hardware rate table mapping for the newer chipsets * like QCA99X0, QCA4019 got revised. The CCK h/w rate values * are in a proper order with respect to the rate/preamble */ bool cck_rate_map_rev2; u32 channel_counters_freq_hz; /* Mgmt tx descriptors threshold for limiting probe response * frames. */ u32 max_probe_resp_desc_thres; u32 tx_chain_mask; u32 rx_chain_mask; u32 max_spatial_stream; u32 cal_data_len; struct ath10k_hw_params_fw { const char *dir; const char *board; size_t board_size; size_t board_ext_size; } fw; /* qca99x0 family chips deliver broadcast/multicast management * frames encrypted and expect software do decryption. */ bool sw_decrypt_mcast_mgmt; const struct ath10k_hw_ops *hw_ops; /* Number of bytes used for alignment in rx_hdr_status of rx desc. */ int decap_align_bytes; /* hw specific clock control parameters */ const struct ath10k_hw_clk_params *hw_clk; int target_cpu_freq; /* Number of bytes to be discarded for each FFT sample */ int spectral_bin_discard; /* The board may have a restricted NSS for 160 or 80+80 vs what it * can do for 80Mhz. */ int vht160_mcs_rx_highest; int vht160_mcs_tx_highest; /* Number of ciphers supported (i.e First N) in cipher_suites array */ int n_cipher_suites; u32 num_peers; u32 ast_skid_limit; u32 num_wds_entries; /* Targets supporting physical addressing capability above 32-bits */ bool target_64bit; /* Target rx ring fill level */ u32 rx_ring_fill_level; }; struct htt_rx_desc; /* Defines needed for Rx descriptor abstraction */ struct ath10k_hw_ops { int (*rx_desc_get_l3_pad_bytes)(struct htt_rx_desc *rxd); void (*set_coverage_class)(struct ath10k *ar, s16 value); int (*enable_pll_clk)(struct ath10k *ar); }; extern const struct ath10k_hw_ops qca988x_ops; extern const struct ath10k_hw_ops qca99x0_ops; extern const struct ath10k_hw_ops qca6174_ops; extern const struct ath10k_hw_ops wcn3990_ops; extern const struct ath10k_hw_clk_params qca6174_clk[]; static inline int ath10k_rx_desc_get_l3_pad_bytes(struct ath10k_hw_params *hw, struct htt_rx_desc *rxd) { if (hw->hw_ops->rx_desc_get_l3_pad_bytes) return hw->hw_ops->rx_desc_get_l3_pad_bytes(rxd); return 0; } /* Target specific defines for MAIN firmware */ #define TARGET_NUM_VDEVS 8 #define TARGET_NUM_PEER_AST 2 #define TARGET_NUM_WDS_ENTRIES 32 #define TARGET_DMA_BURST_SIZE 0 #define TARGET_MAC_AGGR_DELIM 0 #define TARGET_AST_SKID_LIMIT 16 #define TARGET_NUM_STATIONS 16 #define TARGET_NUM_PEERS ((TARGET_NUM_STATIONS) + \ (TARGET_NUM_VDEVS)) #define TARGET_NUM_OFFLOAD_PEERS 0 #define TARGET_NUM_OFFLOAD_REORDER_BUFS 0 #define TARGET_NUM_PEER_KEYS 2 #define TARGET_NUM_TIDS ((TARGET_NUM_PEERS) * 2) #define TARGET_TX_CHAIN_MASK (BIT(0) | BIT(1) | BIT(2)) #define TARGET_RX_CHAIN_MASK (BIT(0) | BIT(1) | BIT(2)) #define TARGET_RX_TIMEOUT_LO_PRI 100 #define TARGET_RX_TIMEOUT_HI_PRI 40 #define TARGET_SCAN_MAX_PENDING_REQS 4 #define TARGET_BMISS_OFFLOAD_MAX_VDEV 3 #define TARGET_ROAM_OFFLOAD_MAX_VDEV 3 #define TARGET_ROAM_OFFLOAD_MAX_AP_PROFILES 8 #define TARGET_GTK_OFFLOAD_MAX_VDEV 3 #define TARGET_NUM_MCAST_GROUPS 0 #define TARGET_NUM_MCAST_TABLE_ELEMS 0 #define TARGET_MCAST2UCAST_MODE ATH10K_MCAST2UCAST_DISABLED #define TARGET_TX_DBG_LOG_SIZE 1024 #define TARGET_RX_SKIP_DEFRAG_TIMEOUT_DUP_DETECTION_CHECK 0 #define TARGET_VOW_CONFIG 0 #define TARGET_NUM_MSDU_DESC (1024 + 400) #define TARGET_MAX_FRAG_ENTRIES 0 /* Target specific defines for 10.X firmware */ #define TARGET_10X_NUM_VDEVS 16 #define TARGET_10X_NUM_PEER_AST 2 #define TARGET_10X_NUM_WDS_ENTRIES 32 #define TARGET_10X_DMA_BURST_SIZE 0 #define TARGET_10X_MAC_AGGR_DELIM 0 #define TARGET_10X_AST_SKID_LIMIT 128 #define TARGET_10X_NUM_STATIONS 128 #define TARGET_10X_TX_STATS_NUM_STATIONS 118 #define TARGET_10X_NUM_PEERS ((TARGET_10X_NUM_STATIONS) + \ (TARGET_10X_NUM_VDEVS)) #define TARGET_10X_TX_STATS_NUM_PEERS ((TARGET_10X_TX_STATS_NUM_STATIONS) + \ (TARGET_10X_NUM_VDEVS)) #define TARGET_10X_NUM_OFFLOAD_PEERS 0 #define TARGET_10X_NUM_OFFLOAD_REORDER_BUFS 0 #define TARGET_10X_NUM_PEER_KEYS 2 #define TARGET_10X_NUM_TIDS_MAX 256 #define TARGET_10X_NUM_TIDS min((TARGET_10X_NUM_TIDS_MAX), \ (TARGET_10X_NUM_PEERS) * 2) #define TARGET_10X_TX_STATS_NUM_TIDS min((TARGET_10X_NUM_TIDS_MAX), \ (TARGET_10X_TX_STATS_NUM_PEERS) * 2) #define TARGET_10X_TX_CHAIN_MASK (BIT(0) | BIT(1) | BIT(2)) #define TARGET_10X_RX_CHAIN_MASK (BIT(0) | BIT(1) | BIT(2)) #define TARGET_10X_RX_TIMEOUT_LO_PRI 100 #define TARGET_10X_RX_TIMEOUT_HI_PRI 40 #define TARGET_10X_SCAN_MAX_PENDING_REQS 4 #define TARGET_10X_BMISS_OFFLOAD_MAX_VDEV 2 #define TARGET_10X_ROAM_OFFLOAD_MAX_VDEV 2 #define TARGET_10X_ROAM_OFFLOAD_MAX_AP_PROFILES 8 #define TARGET_10X_GTK_OFFLOAD_MAX_VDEV 3 #define TARGET_10X_NUM_MCAST_GROUPS 0 #define TARGET_10X_NUM_MCAST_TABLE_ELEMS 0 #define TARGET_10X_MCAST2UCAST_MODE ATH10K_MCAST2UCAST_DISABLED #define TARGET_10X_TX_DBG_LOG_SIZE 1024 #define TARGET_10X_RX_SKIP_DEFRAG_TIMEOUT_DUP_DETECTION_CHECK 1 #define TARGET_10X_VOW_CONFIG 0 #define TARGET_10X_NUM_MSDU_DESC (1024 + 400) #define TARGET_10X_MAX_FRAG_ENTRIES 0 /* 10.2 parameters */ #define TARGET_10_2_DMA_BURST_SIZE 0 /* Target specific defines for WMI-TLV firmware */ #define TARGET_TLV_NUM_VDEVS 4 #define TARGET_TLV_NUM_STATIONS 32 #define TARGET_TLV_NUM_PEERS 33 #define TARGET_TLV_NUM_TDLS_VDEVS 1 #define TARGET_TLV_NUM_TIDS ((TARGET_TLV_NUM_PEERS) * 2) #define TARGET_TLV_NUM_MSDU_DESC (1024 + 32) #define TARGET_TLV_NUM_WOW_PATTERNS 22 /* Target specific defines for WMI-HL-1.0 firmware */ #define TARGET_HL_10_TLV_NUM_PEERS 14 #define TARGET_HL_10_TLV_AST_SKID_LIMIT 6 #define TARGET_HL_10_TLV_NUM_WDS_ENTRIES 2 /* Diagnostic Window */ #define CE_DIAG_PIPE 7 #define NUM_TARGET_CE_CONFIG_WLAN ar->hw_values->num_target_ce_config_wlan /* Target specific defines for 10.4 firmware */ #define TARGET_10_4_NUM_VDEVS 16 #define TARGET_10_4_NUM_STATIONS 32 #define TARGET_10_4_NUM_PEERS ((TARGET_10_4_NUM_STATIONS) + \ (TARGET_10_4_NUM_VDEVS)) #define TARGET_10_4_ACTIVE_PEERS 0 #define TARGET_10_4_NUM_QCACHE_PEERS_MAX 512 #define TARGET_10_4_QCACHE_ACTIVE_PEERS 50 #define TARGET_10_4_QCACHE_ACTIVE_PEERS_PFC 35 #define TARGET_10_4_NUM_OFFLOAD_PEERS 0 #define TARGET_10_4_NUM_OFFLOAD_REORDER_BUFFS 0 #define TARGET_10_4_NUM_PEER_KEYS 2 #define TARGET_10_4_TGT_NUM_TIDS ((TARGET_10_4_NUM_PEERS) * 2) #define TARGET_10_4_NUM_MSDU_DESC (1024 + 400) #define TARGET_10_4_NUM_MSDU_DESC_PFC 2500 #define TARGET_10_4_AST_SKID_LIMIT 32 /* 100 ms for video, best-effort, and background */ #define TARGET_10_4_RX_TIMEOUT_LO_PRI 100 /* 40 ms for voice */ #define TARGET_10_4_RX_TIMEOUT_HI_PRI 40 #define TARGET_10_4_RX_DECAP_MODE ATH10K_HW_TXRX_NATIVE_WIFI #define TARGET_10_4_SCAN_MAX_REQS 4 #define TARGET_10_4_BMISS_OFFLOAD_MAX_VDEV 3 #define TARGET_10_4_ROAM_OFFLOAD_MAX_VDEV 3 #define TARGET_10_4_ROAM_OFFLOAD_MAX_PROFILES 8 /* Note: mcast to ucast is disabled by default */ #define TARGET_10_4_NUM_MCAST_GROUPS 0 #define TARGET_10_4_NUM_MCAST_TABLE_ELEMS 0 #define TARGET_10_4_MCAST2UCAST_MODE 0 #define TARGET_10_4_TX_DBG_LOG_SIZE 1024 #define TARGET_10_4_NUM_WDS_ENTRIES 32 #define TARGET_10_4_DMA_BURST_SIZE 0 #define TARGET_10_4_MAC_AGGR_DELIM 0 #define TARGET_10_4_RX_SKIP_DEFRAG_TIMEOUT_DUP_DETECTION_CHECK 1 #define TARGET_10_4_VOW_CONFIG 0 #define TARGET_10_4_GTK_OFFLOAD_MAX_VDEV 3 #define TARGET_10_4_11AC_TX_MAX_FRAGS 2 #define TARGET_10_4_MAX_PEER_EXT_STATS 16 #define TARGET_10_4_SMART_ANT_CAP 0 #define TARGET_10_4_BK_MIN_FREE 0 #define TARGET_10_4_BE_MIN_FREE 0 #define TARGET_10_4_VI_MIN_FREE 0 #define TARGET_10_4_VO_MIN_FREE 0 #define TARGET_10_4_RX_BATCH_MODE 1 #define TARGET_10_4_THERMAL_THROTTLING_CONFIG 0 #define TARGET_10_4_ATF_CONFIG 0 #define TARGET_10_4_IPHDR_PAD_CONFIG 1 #define TARGET_10_4_QWRAP_CONFIG 0 /* TDLS config */ #define TARGET_10_4_NUM_TDLS_VDEVS 1 #define TARGET_10_4_NUM_TDLS_BUFFER_STA 1 #define TARGET_10_4_NUM_TDLS_SLEEP_STA 1 /* Maximum number of Copy Engine's supported */ #define CE_COUNT_MAX 12 /* Number of Copy Engines supported */ #define CE_COUNT ar->hw_values->ce_count /* * Granted MSIs are assigned as follows: * Firmware uses the first * Remaining MSIs, if any, are used by Copy Engines * This mapping is known to both Target firmware and Host software. * It may be changed as long as Host and Target are kept in sync. */ /* MSI for firmware (errors, etc.) */ #define MSI_ASSIGN_FW 0 /* MSIs for Copy Engines */ #define MSI_ASSIGN_CE_INITIAL 1 #define MSI_ASSIGN_CE_MAX ar->hw_values->msi_assign_ce_max /* as of IP3.7.1 */ #define RTC_STATE_V_ON ar->hw_values->rtc_state_val_on #define RTC_STATE_V_LSB 0 #define RTC_STATE_V_MASK 0x00000007 #define RTC_STATE_ADDRESS 0x0000 #define PCIE_SOC_WAKE_V_MASK 0x00000001 #define PCIE_SOC_WAKE_ADDRESS 0x0004 #define PCIE_SOC_WAKE_RESET 0x00000000 #define SOC_GLOBAL_RESET_ADDRESS 0x0008 #define RTC_SOC_BASE_ADDRESS ar->regs->rtc_soc_base_address #define RTC_WMAC_BASE_ADDRESS ar->regs->rtc_wmac_base_address #define MAC_COEX_BASE_ADDRESS 0x00006000 #define BT_COEX_BASE_ADDRESS 0x00007000 #define SOC_PCIE_BASE_ADDRESS 0x00008000 #define SOC_CORE_BASE_ADDRESS ar->regs->soc_core_base_address #define WLAN_UART_BASE_ADDRESS 0x0000c000 #define WLAN_SI_BASE_ADDRESS 0x00010000 #define WLAN_GPIO_BASE_ADDRESS 0x00014000 #define WLAN_ANALOG_INTF_BASE_ADDRESS 0x0001c000 #define WLAN_MAC_BASE_ADDRESS ar->regs->wlan_mac_base_address #define EFUSE_BASE_ADDRESS 0x00030000 #define FPGA_REG_BASE_ADDRESS 0x00039000 #define WLAN_UART2_BASE_ADDRESS 0x00054c00 #define CE_WRAPPER_BASE_ADDRESS ar->regs->ce_wrapper_base_address #define CE0_BASE_ADDRESS ar->regs->ce0_base_address #define CE1_BASE_ADDRESS ar->regs->ce1_base_address #define CE2_BASE_ADDRESS ar->regs->ce2_base_address #define CE3_BASE_ADDRESS ar->regs->ce3_base_address #define CE4_BASE_ADDRESS ar->regs->ce4_base_address #define CE5_BASE_ADDRESS ar->regs->ce5_base_address #define CE6_BASE_ADDRESS ar->regs->ce6_base_address #define CE7_BASE_ADDRESS ar->regs->ce7_base_address #define DBI_BASE_ADDRESS 0x00060000 #define WLAN_ANALOG_INTF_PCIE_BASE_ADDRESS 0x0006c000 #define PCIE_LOCAL_BASE_ADDRESS ar->regs->pcie_local_base_address #define SOC_RESET_CONTROL_ADDRESS 0x00000000 #define SOC_RESET_CONTROL_OFFSET 0x00000000 #define SOC_RESET_CONTROL_SI0_RST_MASK ar->regs->soc_reset_control_si0_rst_mask #define SOC_RESET_CONTROL_CE_RST_MASK ar->regs->soc_reset_control_ce_rst_mask #define SOC_RESET_CONTROL_CPU_WARM_RST_MASK 0x00000040 #define SOC_CPU_CLOCK_OFFSET 0x00000020 #define SOC_CPU_CLOCK_STANDARD_LSB 0 #define SOC_CPU_CLOCK_STANDARD_MASK 0x00000003 #define SOC_CLOCK_CONTROL_OFFSET 0x00000028 #define SOC_CLOCK_CONTROL_SI0_CLK_MASK 0x00000001 #define SOC_SYSTEM_SLEEP_OFFSET 0x000000c4 #define SOC_LPO_CAL_OFFSET 0x000000e0 #define SOC_LPO_CAL_ENABLE_LSB 20 #define SOC_LPO_CAL_ENABLE_MASK 0x00100000 #define SOC_LF_TIMER_CONTROL0_ADDRESS 0x00000050 #define SOC_LF_TIMER_CONTROL0_ENABLE_MASK 0x00000004 #define SOC_CHIP_ID_ADDRESS ar->regs->soc_chip_id_address #define SOC_CHIP_ID_REV_LSB 8 #define SOC_CHIP_ID_REV_MASK 0x00000f00 #define WLAN_RESET_CONTROL_COLD_RST_MASK 0x00000008 #define WLAN_RESET_CONTROL_WARM_RST_MASK 0x00000004 #define WLAN_SYSTEM_SLEEP_DISABLE_LSB 0 #define WLAN_SYSTEM_SLEEP_DISABLE_MASK 0x00000001 #define WLAN_GPIO_PIN0_ADDRESS 0x00000028 #define WLAN_GPIO_PIN0_CONFIG_LSB 11 #define WLAN_GPIO_PIN0_CONFIG_MASK 0x00007800 #define WLAN_GPIO_PIN0_PAD_PULL_LSB 5 #define WLAN_GPIO_PIN0_PAD_PULL_MASK 0x00000060 #define WLAN_GPIO_PIN1_ADDRESS 0x0000002c #define WLAN_GPIO_PIN1_CONFIG_MASK 0x00007800 #define WLAN_GPIO_PIN10_ADDRESS 0x00000050 #define WLAN_GPIO_PIN11_ADDRESS 0x00000054 #define WLAN_GPIO_PIN12_ADDRESS 0x00000058 #define WLAN_GPIO_PIN13_ADDRESS 0x0000005c #define CLOCK_GPIO_OFFSET 0xffffffff #define CLOCK_GPIO_BT_CLK_OUT_EN_LSB 0 #define CLOCK_GPIO_BT_CLK_OUT_EN_MASK 0 #define SI_CONFIG_OFFSET 0x00000000 #define SI_CONFIG_ERR_INT_LSB 19 #define SI_CONFIG_ERR_INT_MASK 0x00080000 #define SI_CONFIG_BIDIR_OD_DATA_LSB 18 #define SI_CONFIG_BIDIR_OD_DATA_MASK 0x00040000 #define SI_CONFIG_I2C_LSB 16 #define SI_CONFIG_I2C_MASK 0x00010000 #define SI_CONFIG_POS_SAMPLE_LSB 7 #define SI_CONFIG_POS_SAMPLE_MASK 0x00000080 #define SI_CONFIG_INACTIVE_DATA_LSB 5 #define SI_CONFIG_INACTIVE_DATA_MASK 0x00000020 #define SI_CONFIG_INACTIVE_CLK_LSB 4 #define SI_CONFIG_INACTIVE_CLK_MASK 0x00000010 #define SI_CONFIG_DIVIDER_LSB 0 #define SI_CONFIG_DIVIDER_MASK 0x0000000f #define SI_CS_OFFSET 0x00000004 #define SI_CS_DONE_ERR_LSB 10 #define SI_CS_DONE_ERR_MASK 0x00000400 #define SI_CS_DONE_INT_LSB 9 #define SI_CS_DONE_INT_MASK 0x00000200 #define SI_CS_START_LSB 8 #define SI_CS_START_MASK 0x00000100 #define SI_CS_RX_CNT_LSB 4 #define SI_CS_RX_CNT_MASK 0x000000f0 #define SI_CS_TX_CNT_LSB 0 #define SI_CS_TX_CNT_MASK 0x0000000f #define SI_TX_DATA0_OFFSET 0x00000008 #define SI_TX_DATA1_OFFSET 0x0000000c #define SI_RX_DATA0_OFFSET 0x00000010 #define SI_RX_DATA1_OFFSET 0x00000014 #define CORE_CTRL_CPU_INTR_MASK 0x00002000 #define CORE_CTRL_PCIE_REG_31_MASK 0x00000800 #define CORE_CTRL_ADDRESS 0x0000 #define PCIE_INTR_ENABLE_ADDRESS 0x0008 #define PCIE_INTR_CAUSE_ADDRESS 0x000c #define PCIE_INTR_CLR_ADDRESS ar->regs->pcie_intr_clr_address #define SCRATCH_3_ADDRESS ar->regs->scratch_3_address #define CPU_INTR_ADDRESS 0x0010 #define FW_RAM_CONFIG_ADDRESS 0x0018 #define CCNT_TO_MSEC(ar, x) ((x) / ar->hw_params.channel_counters_freq_hz) /* Firmware indications to the Host via SCRATCH_3 register. */ #define FW_INDICATOR_ADDRESS ar->regs->fw_indicator_address #define FW_IND_EVENT_PENDING 1 #define FW_IND_INITIALIZED 2 #define FW_IND_HOST_READY 0x80000000 /* HOST_REG interrupt from firmware */ #define PCIE_INTR_FIRMWARE_MASK ar->regs->pcie_intr_fw_mask #define PCIE_INTR_CE_MASK_ALL ar->regs->pcie_intr_ce_mask_all #define DRAM_BASE_ADDRESS 0x00400000 #define PCIE_BAR_REG_ADDRESS 0x40030 #define MISSING 0 #define SYSTEM_SLEEP_OFFSET SOC_SYSTEM_SLEEP_OFFSET #define WLAN_SYSTEM_SLEEP_OFFSET SOC_SYSTEM_SLEEP_OFFSET #define WLAN_RESET_CONTROL_OFFSET SOC_RESET_CONTROL_OFFSET #define CLOCK_CONTROL_OFFSET SOC_CLOCK_CONTROL_OFFSET #define CLOCK_CONTROL_SI0_CLK_MASK SOC_CLOCK_CONTROL_SI0_CLK_MASK #define RESET_CONTROL_MBOX_RST_MASK MISSING #define RESET_CONTROL_SI0_RST_MASK SOC_RESET_CONTROL_SI0_RST_MASK #define GPIO_BASE_ADDRESS WLAN_GPIO_BASE_ADDRESS #define GPIO_PIN0_OFFSET WLAN_GPIO_PIN0_ADDRESS #define GPIO_PIN1_OFFSET WLAN_GPIO_PIN1_ADDRESS #define GPIO_PIN0_CONFIG_LSB WLAN_GPIO_PIN0_CONFIG_LSB #define GPIO_PIN0_CONFIG_MASK WLAN_GPIO_PIN0_CONFIG_MASK #define GPIO_PIN0_PAD_PULL_LSB WLAN_GPIO_PIN0_PAD_PULL_LSB #define GPIO_PIN0_PAD_PULL_MASK WLAN_GPIO_PIN0_PAD_PULL_MASK #define GPIO_PIN1_CONFIG_MASK WLAN_GPIO_PIN1_CONFIG_MASK #define SI_BASE_ADDRESS WLAN_SI_BASE_ADDRESS #define SCRATCH_BASE_ADDRESS SOC_CORE_BASE_ADDRESS #define LOCAL_SCRATCH_OFFSET 0x18 #define CPU_CLOCK_OFFSET SOC_CPU_CLOCK_OFFSET #define LPO_CAL_OFFSET SOC_LPO_CAL_OFFSET #define GPIO_PIN10_OFFSET WLAN_GPIO_PIN10_ADDRESS #define GPIO_PIN11_OFFSET WLAN_GPIO_PIN11_ADDRESS #define GPIO_PIN12_OFFSET WLAN_GPIO_PIN12_ADDRESS #define GPIO_PIN13_OFFSET WLAN_GPIO_PIN13_ADDRESS #define CPU_CLOCK_STANDARD_LSB SOC_CPU_CLOCK_STANDARD_LSB #define CPU_CLOCK_STANDARD_MASK SOC_CPU_CLOCK_STANDARD_MASK #define LPO_CAL_ENABLE_LSB SOC_LPO_CAL_ENABLE_LSB #define LPO_CAL_ENABLE_MASK SOC_LPO_CAL_ENABLE_MASK #define ANALOG_INTF_BASE_ADDRESS WLAN_ANALOG_INTF_BASE_ADDRESS #define MBOX_BASE_ADDRESS MISSING #define INT_STATUS_ENABLE_ERROR_LSB MISSING #define INT_STATUS_ENABLE_ERROR_MASK MISSING #define INT_STATUS_ENABLE_CPU_LSB MISSING #define INT_STATUS_ENABLE_CPU_MASK MISSING #define INT_STATUS_ENABLE_COUNTER_LSB MISSING #define INT_STATUS_ENABLE_COUNTER_MASK MISSING #define INT_STATUS_ENABLE_MBOX_DATA_LSB MISSING #define INT_STATUS_ENABLE_MBOX_DATA_MASK MISSING #define ERROR_STATUS_ENABLE_RX_UNDERFLOW_LSB MISSING #define ERROR_STATUS_ENABLE_RX_UNDERFLOW_MASK MISSING #define ERROR_STATUS_ENABLE_TX_OVERFLOW_LSB MISSING #define ERROR_STATUS_ENABLE_TX_OVERFLOW_MASK MISSING #define COUNTER_INT_STATUS_ENABLE_BIT_LSB MISSING #define COUNTER_INT_STATUS_ENABLE_BIT_MASK MISSING #define INT_STATUS_ENABLE_ADDRESS MISSING #define CPU_INT_STATUS_ENABLE_BIT_LSB MISSING #define CPU_INT_STATUS_ENABLE_BIT_MASK MISSING #define HOST_INT_STATUS_ADDRESS MISSING #define CPU_INT_STATUS_ADDRESS MISSING #define ERROR_INT_STATUS_ADDRESS MISSING #define ERROR_INT_STATUS_WAKEUP_MASK MISSING #define ERROR_INT_STATUS_WAKEUP_LSB MISSING #define ERROR_INT_STATUS_RX_UNDERFLOW_MASK MISSING #define ERROR_INT_STATUS_RX_UNDERFLOW_LSB MISSING #define ERROR_INT_STATUS_TX_OVERFLOW_MASK MISSING #define ERROR_INT_STATUS_TX_OVERFLOW_LSB MISSING #define COUNT_DEC_ADDRESS MISSING #define HOST_INT_STATUS_CPU_MASK MISSING #define HOST_INT_STATUS_CPU_LSB MISSING #define HOST_INT_STATUS_ERROR_MASK MISSING #define HOST_INT_STATUS_ERROR_LSB MISSING #define HOST_INT_STATUS_COUNTER_MASK MISSING #define HOST_INT_STATUS_COUNTER_LSB MISSING #define RX_LOOKAHEAD_VALID_ADDRESS MISSING #define WINDOW_DATA_ADDRESS MISSING #define WINDOW_READ_ADDR_ADDRESS MISSING #define WINDOW_WRITE_ADDR_ADDRESS MISSING #define QCA9887_1_0_I2C_SDA_GPIO_PIN 5 #define QCA9887_1_0_I2C_SDA_PIN_CONFIG 3 #define QCA9887_1_0_SI_CLK_GPIO_PIN 17 #define QCA9887_1_0_SI_CLK_PIN_CONFIG 3 #define QCA9887_1_0_GPIO_ENABLE_W1TS_LOW_ADDRESS 0x00000010 #define QCA9887_EEPROM_SELECT_READ 0xa10000a0 #define QCA9887_EEPROM_ADDR_HI_MASK 0x0000ff00 #define QCA9887_EEPROM_ADDR_HI_LSB 8 #define QCA9887_EEPROM_ADDR_LO_MASK 0x00ff0000 #define QCA9887_EEPROM_ADDR_LO_LSB 16 #define MBOX_RESET_CONTROL_ADDRESS 0x00000000 #define MBOX_HOST_INT_STATUS_ADDRESS 0x00000800 #define MBOX_HOST_INT_STATUS_ERROR_LSB 7 #define MBOX_HOST_INT_STATUS_ERROR_MASK 0x00000080 #define MBOX_HOST_INT_STATUS_CPU_LSB 6 #define MBOX_HOST_INT_STATUS_CPU_MASK 0x00000040 #define MBOX_HOST_INT_STATUS_COUNTER_LSB 4 #define MBOX_HOST_INT_STATUS_COUNTER_MASK 0x00000010 #define MBOX_CPU_INT_STATUS_ADDRESS 0x00000801 #define MBOX_ERROR_INT_STATUS_ADDRESS 0x00000802 #define MBOX_ERROR_INT_STATUS_WAKEUP_LSB 2 #define MBOX_ERROR_INT_STATUS_WAKEUP_MASK 0x00000004 #define MBOX_ERROR_INT_STATUS_RX_UNDERFLOW_LSB 1 #define MBOX_ERROR_INT_STATUS_RX_UNDERFLOW_MASK 0x00000002 #define MBOX_ERROR_INT_STATUS_TX_OVERFLOW_LSB 0 #define MBOX_ERROR_INT_STATUS_TX_OVERFLOW_MASK 0x00000001 #define MBOX_COUNTER_INT_STATUS_ADDRESS 0x00000803 #define MBOX_COUNTER_INT_STATUS_COUNTER_LSB 0 #define MBOX_COUNTER_INT_STATUS_COUNTER_MASK 0x000000ff #define MBOX_RX_LOOKAHEAD_VALID_ADDRESS 0x00000805 #define MBOX_INT_STATUS_ENABLE_ADDRESS 0x00000828 #define MBOX_INT_STATUS_ENABLE_ERROR_LSB 7 #define MBOX_INT_STATUS_ENABLE_ERROR_MASK 0x00000080 #define MBOX_INT_STATUS_ENABLE_CPU_LSB 6 #define MBOX_INT_STATUS_ENABLE_CPU_MASK 0x00000040 #define MBOX_INT_STATUS_ENABLE_INT_LSB 5 #define MBOX_INT_STATUS_ENABLE_INT_MASK 0x00000020 #define MBOX_INT_STATUS_ENABLE_COUNTER_LSB 4 #define MBOX_INT_STATUS_ENABLE_COUNTER_MASK 0x00000010 #define MBOX_INT_STATUS_ENABLE_MBOX_DATA_LSB 0 #define MBOX_INT_STATUS_ENABLE_MBOX_DATA_MASK 0x0000000f #define MBOX_CPU_INT_STATUS_ENABLE_ADDRESS 0x00000819 #define MBOX_CPU_INT_STATUS_ENABLE_BIT_LSB 0 #define MBOX_CPU_INT_STATUS_ENABLE_BIT_MASK 0x000000ff #define MBOX_ERROR_STATUS_ENABLE_ADDRESS 0x0000081a #define MBOX_ERROR_STATUS_ENABLE_RX_UNDERFLOW_LSB 1 #define MBOX_ERROR_STATUS_ENABLE_RX_UNDERFLOW_MASK 0x00000002 #define MBOX_ERROR_STATUS_ENABLE_TX_OVERFLOW_LSB 0 #define MBOX_ERROR_STATUS_ENABLE_TX_OVERFLOW_MASK 0x00000001 #define MBOX_COUNTER_INT_STATUS_ENABLE_ADDRESS 0x0000081b #define MBOX_COUNTER_INT_STATUS_ENABLE_BIT_LSB 0 #define MBOX_COUNTER_INT_STATUS_ENABLE_BIT_MASK 0x000000ff #define MBOX_COUNT_ADDRESS 0x00000820 #define MBOX_COUNT_DEC_ADDRESS 0x00000840 #define MBOX_WINDOW_DATA_ADDRESS 0x00000874 #define MBOX_WINDOW_WRITE_ADDR_ADDRESS 0x00000878 #define MBOX_WINDOW_READ_ADDR_ADDRESS 0x0000087c #define MBOX_CPU_DBG_SEL_ADDRESS 0x00000883 #define MBOX_CPU_DBG_ADDRESS 0x00000884 #define MBOX_RTC_BASE_ADDRESS 0x00000000 #define MBOX_GPIO_BASE_ADDRESS 0x00005000 #define MBOX_MBOX_BASE_ADDRESS 0x00008000 #define RTC_STATE_V_GET(x) (((x) & RTC_STATE_V_MASK) >> RTC_STATE_V_LSB) /* Register definitions for first generation ath10k cards. These cards include * a mac thich has a register allocation similar to ath9k and at least some * registers including the ones relevant for modifying the coverage class are * identical to the ath9k definitions. * These registers are usually managed by the ath10k firmware. However by * overriding them it is possible to support coverage class modifications. */ #define WAVE1_PCU_ACK_CTS_TIMEOUT 0x8014 #define WAVE1_PCU_ACK_CTS_TIMEOUT_MAX 0x00003FFF #define WAVE1_PCU_ACK_CTS_TIMEOUT_ACK_MASK 0x00003FFF #define WAVE1_PCU_ACK_CTS_TIMEOUT_ACK_LSB 0 #define WAVE1_PCU_ACK_CTS_TIMEOUT_CTS_MASK 0x3FFF0000 #define WAVE1_PCU_ACK_CTS_TIMEOUT_CTS_LSB 16 #define WAVE1_PCU_GBL_IFS_SLOT 0x1070 #define WAVE1_PCU_GBL_IFS_SLOT_MASK 0x0000FFFF #define WAVE1_PCU_GBL_IFS_SLOT_MAX 0x0000FFFF #define WAVE1_PCU_GBL_IFS_SLOT_LSB 0 #define WAVE1_PCU_GBL_IFS_SLOT_RESV0 0xFFFF0000 #define WAVE1_PHYCLK 0x801C #define WAVE1_PHYCLK_USEC_MASK 0x0000007F #define WAVE1_PHYCLK_USEC_LSB 0 /* qca6174 PLL offset/mask */ #define SOC_CORE_CLK_CTRL_OFFSET 0x00000114 #define SOC_CORE_CLK_CTRL_DIV_LSB 0 #define SOC_CORE_CLK_CTRL_DIV_MASK 0x00000007 #define EFUSE_OFFSET 0x0000032c #define EFUSE_XTAL_SEL_LSB 8 #define EFUSE_XTAL_SEL_MASK 0x00000700 #define BB_PLL_CONFIG_OFFSET 0x000002f4 #define BB_PLL_CONFIG_FRAC_LSB 0 #define BB_PLL_CONFIG_FRAC_MASK 0x0003ffff #define BB_PLL_CONFIG_OUTDIV_LSB 18 #define BB_PLL_CONFIG_OUTDIV_MASK 0x001c0000 #define WLAN_PLL_SETTLE_OFFSET 0x0018 #define WLAN_PLL_SETTLE_TIME_LSB 0 #define WLAN_PLL_SETTLE_TIME_MASK 0x000007ff #define WLAN_PLL_CONTROL_OFFSET 0x0014 #define WLAN_PLL_CONTROL_DIV_LSB 0 #define WLAN_PLL_CONTROL_DIV_MASK 0x000003ff #define WLAN_PLL_CONTROL_REFDIV_LSB 10 #define WLAN_PLL_CONTROL_REFDIV_MASK 0x00003c00 #define WLAN_PLL_CONTROL_BYPASS_LSB 16 #define WLAN_PLL_CONTROL_BYPASS_MASK 0x00010000 #define WLAN_PLL_CONTROL_NOPWD_LSB 18 #define WLAN_PLL_CONTROL_NOPWD_MASK 0x00040000 #define RTC_SYNC_STATUS_OFFSET 0x0244 #define RTC_SYNC_STATUS_PLL_CHANGING_LSB 5 #define RTC_SYNC_STATUS_PLL_CHANGING_MASK 0x00000020 /* qca6174 PLL offset/mask end */ #endif /* _HW_H_ */