/* SPDX-License-Identifier: GPL-2.0-only * * Copyright (C) 2020-21 Intel Corporation. */ #ifndef IOSM_IPC_IMEM_H #define IOSM_IPC_IMEM_H #include #include "iosm_ipc_mmio.h" #include "iosm_ipc_pcie.h" #include "iosm_ipc_uevent.h" #include "iosm_ipc_wwan.h" #include "iosm_ipc_task_queue.h" struct ipc_chnl_cfg; /* IRQ moderation in usec */ #define IRQ_MOD_OFF 0 #define IRQ_MOD_NET 1000 #define IRQ_MOD_TRC 4000 /* Either the PSI image is accepted by CP or the suspended flash tool is waken, * informed that the CP ROM driver is not ready to process the PSI image. * unit : milliseconds */ #define IPC_PSI_TRANSFER_TIMEOUT 3000 /* Timeout in 20 msec to wait for the modem to boot up to * IPC_MEM_DEVICE_IPC_INIT state. * unit : milliseconds (500 * ipc_util_msleep(20)) */ #define IPC_MODEM_BOOT_TIMEOUT 500 /* Wait timeout for ipc status reflects IPC_MEM_DEVICE_IPC_UNINIT * unit : milliseconds */ #define IPC_MODEM_UNINIT_TIMEOUT_MS 30 /* Pending time for processing data. * unit : milliseconds */ #define IPC_PEND_DATA_TIMEOUT 500 /* The timeout in milliseconds for application to wait for remote time. */ #define IPC_REMOTE_TS_TIMEOUT_MS 10 /* Timeout for TD allocation retry. * unit : milliseconds */ #define IPC_TD_ALLOC_TIMER_PERIOD_MS 100 /* Host sleep target is host */ #define IPC_HOST_SLEEP_HOST 0 /* Host sleep target is device */ #define IPC_HOST_SLEEP_DEVICE 1 /* Sleep message, target host: AP enters sleep / target device: CP is * allowed to enter sleep and shall use the host sleep protocol */ #define IPC_HOST_SLEEP_ENTER_SLEEP 0 /* Sleep_message, target host: AP exits sleep / target device: CP is * NOT allowed to enter sleep */ #define IPC_HOST_SLEEP_EXIT_SLEEP 1 #define IMEM_IRQ_DONT_CARE (-1) #define IPC_MEM_MAX_CHANNELS 8 #define IPC_MEM_MUX_IP_SESSION_ENTRIES 8 #define IPC_MEM_MUX_IP_CH_IF_ID 0 #define TD_UPDATE_DEFAULT_TIMEOUT_USEC 1900 #define FORCE_UPDATE_DEFAULT_TIMEOUT_USEC 500 /* Sleep_message, target host: not applicable / target device: CP is * allowed to enter sleep and shall NOT use the device sleep protocol */ #define IPC_HOST_SLEEP_ENTER_SLEEP_NO_PROTOCOL 2 /* in_band_crash_signal IPC_MEM_INBAND_CRASH_SIG * Modem crash notification configuration. If this value is non-zero then * FEATURE_SET message will be sent to the Modem as a result the Modem will * signal Crash via Execution Stage register. If this value is zero then Modem * will use out-of-band method to notify about it's Crash. */ #define IPC_MEM_INBAND_CRASH_SIG 1 /* Extra headroom to be allocated for DL SKBs to allow addition of Ethernet * header */ #define IPC_MEM_DL_ETH_OFFSET 16 #define IPC_CB(skb) ((struct ipc_skb_cb *)((skb)->cb)) #define IOSM_CHIP_INFO_SIZE_MAX 100 #define FULLY_FUNCTIONAL 0 #define IOSM_DEVLINK_INIT 1 /* List of the supported UL/DL pipes. */ enum ipc_mem_pipes { IPC_MEM_PIPE_0 = 0, IPC_MEM_PIPE_1, IPC_MEM_PIPE_2, IPC_MEM_PIPE_3, IPC_MEM_PIPE_4, IPC_MEM_PIPE_5, IPC_MEM_PIPE_6, IPC_MEM_PIPE_7, IPC_MEM_PIPE_8, IPC_MEM_PIPE_9, IPC_MEM_PIPE_10, IPC_MEM_PIPE_11, IPC_MEM_PIPE_12, IPC_MEM_PIPE_13, IPC_MEM_PIPE_14, IPC_MEM_PIPE_15, IPC_MEM_PIPE_16, IPC_MEM_PIPE_17, IPC_MEM_PIPE_18, IPC_MEM_PIPE_19, IPC_MEM_PIPE_20, IPC_MEM_PIPE_21, IPC_MEM_PIPE_22, IPC_MEM_PIPE_23, IPC_MEM_MAX_PIPES }; /* Enum defining channel states. */ enum ipc_channel_state { IMEM_CHANNEL_FREE, IMEM_CHANNEL_RESERVED, IMEM_CHANNEL_ACTIVE, IMEM_CHANNEL_CLOSING, }; /* Time Unit */ enum ipc_time_unit { IPC_SEC = 0, IPC_MILLI_SEC = 1, IPC_MICRO_SEC = 2, IPC_NANO_SEC = 3, IPC_PICO_SEC = 4, IPC_FEMTO_SEC = 5, IPC_ATTO_SEC = 6, }; /** * enum ipc_ctype - Enum defining supported channel type needed for control * /IP traffic. * @IPC_CTYPE_WWAN: Used for IP traffic * @IPC_CTYPE_CTRL: Used for Control Communication */ enum ipc_ctype { IPC_CTYPE_WWAN, IPC_CTYPE_CTRL, }; /* Pipe direction. */ enum ipc_mem_pipe_dir { IPC_MEM_DIR_UL, IPC_MEM_DIR_DL, }; /* HP update identifier. To be used as data for ipc_cp_irq_hpda_update() */ enum ipc_hp_identifier { IPC_HP_MR = 0, IPC_HP_PM_TRIGGER, IPC_HP_WAKEUP_SPEC_TMR, IPC_HP_TD_UPD_TMR_START, IPC_HP_TD_UPD_TMR, IPC_HP_FAST_TD_UPD_TMR, IPC_HP_UL_WRITE_TD, IPC_HP_DL_PROCESS, IPC_HP_NET_CHANNEL_INIT, IPC_HP_CDEV_OPEN, }; /** * struct ipc_pipe - Structure for Pipe. * @tdr_start: Ipc private protocol Transfer Descriptor Ring * @channel: Id of the sio device, set by imem_sio_open, * needed to pass DL char to the user terminal * @skbr_start: Circular buffer for skbuf and the buffer * reference in a tdr_start entry. * @phy_tdr_start: Transfer descriptor start address * @old_head: last head pointer reported to CP. * @old_tail: AP read position before CP moves the read * position to write/head. If CP has consumed the * buffers, AP has to freed the skbuf starting at * tdr_start[old_tail]. * @nr_of_entries: Number of elements of skb_start and tdr_start. * @max_nr_of_queued_entries: Maximum number of queued entries in TDR * @accumulation_backoff: Accumulation in usec for accumulation * backoff (0 = no acc backoff) * @irq_moderation: timer in usec for irq_moderation * (0=no irq moderation) * @pipe_nr: Pipe identification number * @irq: Interrupt vector * @dir: Direction of data stream in pipe * @td_tag: Unique tag of the buffer queued * @buf_size: Buffer size (in bytes) for preallocated * buffers (for DL pipes) * @nr_of_queued_entries: Aueued number of entries * @is_open: Check for open pipe status */ struct ipc_pipe { struct ipc_protocol_td *tdr_start; struct ipc_mem_channel *channel; struct sk_buff **skbr_start; dma_addr_t phy_tdr_start; u32 old_head; u32 old_tail; u32 nr_of_entries; u32 max_nr_of_queued_entries; u32 accumulation_backoff; u32 irq_moderation; u32 pipe_nr; u32 irq; enum ipc_mem_pipe_dir dir; u32 td_tag; u32 buf_size; u16 nr_of_queued_entries; u8 is_open:1; }; /** * struct ipc_mem_channel - Structure for Channel. * @channel_id: Instance of the channel list and is return to the user * at the end of the open operation. * @ctype: Control or netif channel. * @index: unique index per ctype * @ul_pipe: pipe objects * @dl_pipe: pipe objects * @if_id: Interface ID * @net_err_count: Number of downlink errors returned by ipc_wwan_receive * interface at the entry point of the IP stack. * @state: Free, reserved or busy (in use). * @ul_sem: Needed for the blocking write or uplink transfer. * @ul_list: Uplink accumulator which is filled by the uplink * char app or IP stack. The socket buffer pointer are * added to the descriptor list in the kthread context. */ struct ipc_mem_channel { int channel_id; enum ipc_ctype ctype; int index; struct ipc_pipe ul_pipe; struct ipc_pipe dl_pipe; int if_id; u32 net_err_count; enum ipc_channel_state state; struct completion ul_sem; struct sk_buff_head ul_list; }; /** * enum ipc_phase - Different AP and CP phases. * The enums defined after "IPC_P_ROM" and before * "IPC_P_RUN" indicates the operating state where CP can * respond to any requests. So while introducing new phase * this shall be taken into consideration. * @IPC_P_OFF: On host PC, the PCIe device link settings are known * about the combined power on. PC is running, the driver * is loaded and CP is in power off mode. The PCIe bus * driver call the device power mode D3hot. In this phase * the driver the polls the device, until the device is in * the power on state and signals the power mode D0. * @IPC_P_OFF_REQ: The intermediate phase between cleanup activity starts * and ends. * @IPC_P_CRASH: The phase indicating CP crash * @IPC_P_CD_READY: The phase indicating CP core dump is ready * @IPC_P_ROM: After power on, CP starts in ROM mode and the IPC ROM * driver is waiting 150 ms for the AP active notification * saved in the PCI link status register. * @IPC_P_PSI: Primary signed image download phase * @IPC_P_EBL: Extended bootloader pahse * @IPC_P_RUN: The phase after flashing to RAM is the RUNTIME phase. */ enum ipc_phase { IPC_P_OFF, IPC_P_OFF_REQ, IPC_P_CRASH, IPC_P_CD_READY, IPC_P_ROM, IPC_P_PSI, IPC_P_EBL, IPC_P_RUN, }; /** * struct iosm_imem - Current state of the IPC shared memory. * @mmio: mmio instance to access CP MMIO area / * doorbell scratchpad. * @ipc_protocol: IPC Protocol instance * @ipc_task: Task for entry into ipc task queue * @wwan: WWAN device pointer * @mux: IP Data multiplexing state. * @sio: IPC SIO data structure pointer * @ipc_port: IPC PORT data structure pointer * @pcie: IPC PCIe * @dev: Pointer to device structure * @ipc_requested_state: Expected IPC state on CP. * @channels: Channel list with UL/DL pipe pairs. * @ipc_devlink: IPC Devlink data structure pointer * @ipc_status: local ipc_status * @nr_of_channels: number of configured channels * @startup_timer: startup timer for NAND support. * @hrtimer_period: Hr timer period * @tdupdate_timer: Delay the TD update doorbell. * @fast_update_timer: forced head pointer update delay timer. * @td_alloc_timer: Timer for DL pipe TD allocation retry * @rom_exit_code: Mapped boot rom exit code. * @enter_runtime: 1 means the transition to runtime phase was * executed. * @ul_pend_sem: Semaphore to wait/complete of UL TDs * before closing pipe. * @app_notify_ul_pend: Signal app if UL TD is pending * @dl_pend_sem: Semaphore to wait/complete of DL TDs * before closing pipe. * @app_notify_dl_pend: Signal app if DL TD is pending * @phase: Operating phase like runtime. * @pci_device_id: Device ID * @cp_version: CP version * @device_sleep: Device sleep state * @run_state_worker: Pointer to worker component for device * setup operations to be called when modem * reaches RUN state * @ev_irq_pending: 0 means inform the IPC tasklet to * process the irq actions. * @flag: Flag to monitor the state of driver * @td_update_timer_suspended: if true then td update timer suspend * @ev_mux_net_transmit_pending:0 means inform the IPC tasklet to pass * @reset_det_n: Reset detect flag * @pcie_wake_n: Pcie wake flag */ struct iosm_imem { struct iosm_mmio *mmio; struct iosm_protocol *ipc_protocol; struct ipc_task *ipc_task; struct iosm_wwan *wwan; struct iosm_mux *mux; struct iosm_cdev *ipc_port[IPC_MEM_MAX_CHANNELS]; struct iosm_pcie *pcie; struct device *dev; enum ipc_mem_device_ipc_state ipc_requested_state; struct ipc_mem_channel channels[IPC_MEM_MAX_CHANNELS]; struct iosm_devlink *ipc_devlink; u32 ipc_status; u32 nr_of_channels; struct hrtimer startup_timer; ktime_t hrtimer_period; struct hrtimer tdupdate_timer; struct hrtimer fast_update_timer; struct hrtimer td_alloc_timer; enum rom_exit_code rom_exit_code; u32 enter_runtime; struct completion ul_pend_sem; u32 app_notify_ul_pend; struct completion dl_pend_sem; u32 app_notify_dl_pend; enum ipc_phase phase; u16 pci_device_id; int cp_version; int device_sleep; struct work_struct run_state_worker; u8 ev_irq_pending[IPC_IRQ_VECTORS]; unsigned long flag; u8 td_update_timer_suspended:1, ev_mux_net_transmit_pending:1, reset_det_n:1, pcie_wake_n:1; }; /** * ipc_imem_init - Initialize the shared memory region * @pcie: Pointer to core driver data-struct * @device_id: PCI device ID * @mmio: Pointer to the mmio area * @dev: Pointer to device structure * * Returns: Initialized imem pointer on success else NULL */ struct iosm_imem *ipc_imem_init(struct iosm_pcie *pcie, unsigned int device_id, void __iomem *mmio, struct device *dev); /** * ipc_imem_pm_s2idle_sleep - Set PM variables to sleep/active for * s2idle sleep/active * @ipc_imem: Pointer to imem data-struct * @sleep: Set PM Variable to sleep/active */ void ipc_imem_pm_s2idle_sleep(struct iosm_imem *ipc_imem, bool sleep); /** * ipc_imem_pm_suspend - The HAL shall ask the shared memory layer * whether D3 is allowed. * @ipc_imem: Pointer to imem data-struct */ void ipc_imem_pm_suspend(struct iosm_imem *ipc_imem); /** * ipc_imem_pm_resume - The HAL shall inform the shared memory layer * that the device is active. * @ipc_imem: Pointer to imem data-struct */ void ipc_imem_pm_resume(struct iosm_imem *ipc_imem); /** * ipc_imem_cleanup - Inform CP and free the shared memory resources. * @ipc_imem: Pointer to imem data-struct */ void ipc_imem_cleanup(struct iosm_imem *ipc_imem); /** * ipc_imem_irq_process - Shift the IRQ actions to the IPC thread. * @ipc_imem: Pointer to imem data-struct * @irq: Irq number */ void ipc_imem_irq_process(struct iosm_imem *ipc_imem, int irq); /** * imem_get_device_sleep_state - Get the device sleep state value. * @ipc_imem: Pointer to imem instance * * Returns: device sleep state */ int imem_get_device_sleep_state(struct iosm_imem *ipc_imem); /** * ipc_imem_td_update_timer_suspend - Updates the TD Update Timer suspend flag. * @ipc_imem: Pointer to imem data-struct * @suspend: Flag to update. If TRUE then HP update doorbell is triggered to * device without any wait. If FALSE then HP update doorbell is * delayed until timeout. */ void ipc_imem_td_update_timer_suspend(struct iosm_imem *ipc_imem, bool suspend); /** * ipc_imem_channel_close - Release the channel resources. * @ipc_imem: Pointer to imem data-struct * @channel_id: Channel ID to be cleaned up. */ void ipc_imem_channel_close(struct iosm_imem *ipc_imem, int channel_id); /** * ipc_imem_channel_alloc - Reserves a channel * @ipc_imem: Pointer to imem data-struct * @index: ID to lookup from the preallocated list. * @ctype: Channel type. * * Returns: Index on success and failure value on error */ int ipc_imem_channel_alloc(struct iosm_imem *ipc_imem, int index, enum ipc_ctype ctype); /** * ipc_imem_channel_open - Establish the pipes. * @ipc_imem: Pointer to imem data-struct * @channel_id: Channel ID returned during alloc. * @db_id: Doorbell ID for trigger identifier. * * Returns: Pointer of ipc_mem_channel on success and NULL on failure. */ struct ipc_mem_channel *ipc_imem_channel_open(struct iosm_imem *ipc_imem, int channel_id, u32 db_id); /** * ipc_imem_td_update_timer_start - Starts the TD Update Timer if not running. * @ipc_imem: Pointer to imem data-struct */ void ipc_imem_td_update_timer_start(struct iosm_imem *ipc_imem); /** * ipc_imem_ul_write_td - Pass the channel UL list to protocol layer for TD * preparation and sending them to the device. * @ipc_imem: Pointer to imem data-struct * * Returns: TRUE of HP Doorbell trigger is pending. FALSE otherwise. */ bool ipc_imem_ul_write_td(struct iosm_imem *ipc_imem); /** * ipc_imem_ul_send - Dequeue SKB from channel list and start with * the uplink transfer.If HP Doorbell is pending to be * triggered then starts the TD Update Timer. * @ipc_imem: Pointer to imem data-struct */ void ipc_imem_ul_send(struct iosm_imem *ipc_imem); /** * ipc_imem_channel_update - Set or modify pipe config of an existing channel * @ipc_imem: Pointer to imem data-struct * @id: Channel config index * @chnl_cfg: Channel config struct * @irq_moderation: Timer in usec for irq_moderation */ void ipc_imem_channel_update(struct iosm_imem *ipc_imem, int id, struct ipc_chnl_cfg chnl_cfg, u32 irq_moderation); /** * ipc_imem_channel_free -Free an IPC channel. * @channel: Channel to be freed */ void ipc_imem_channel_free(struct ipc_mem_channel *channel); /** * ipc_imem_hrtimer_stop - Stop the hrtimer * @hr_timer: Pointer to hrtimer instance */ void ipc_imem_hrtimer_stop(struct hrtimer *hr_timer); /** * ipc_imem_pipe_cleanup - Reset volatile pipe content for all channels * @ipc_imem: Pointer to imem data-struct * @pipe: Pipe to cleaned up */ void ipc_imem_pipe_cleanup(struct iosm_imem *ipc_imem, struct ipc_pipe *pipe); /** * ipc_imem_pipe_close - Send msg to device to close pipe * @ipc_imem: Pointer to imem data-struct * @pipe: Pipe to be closed */ void ipc_imem_pipe_close(struct iosm_imem *ipc_imem, struct ipc_pipe *pipe); /** * ipc_imem_phase_update - Get the CP execution state * and map it to the AP phase. * @ipc_imem: Pointer to imem data-struct * * Returns: Current ap updated phase */ enum ipc_phase ipc_imem_phase_update(struct iosm_imem *ipc_imem); /** * ipc_imem_phase_get_string - Return the current operation * phase as string. * @phase: AP phase * * Returns: AP phase string */ const char *ipc_imem_phase_get_string(enum ipc_phase phase); /** * ipc_imem_msg_send_feature_set - Send feature set message to modem * @ipc_imem: Pointer to imem data-struct * @reset_enable: 0 = out-of-band, 1 = in-band-crash notification * @atomic_ctx: if disabled call in tasklet context * */ void ipc_imem_msg_send_feature_set(struct iosm_imem *ipc_imem, unsigned int reset_enable, bool atomic_ctx); /** * ipc_imem_ipc_init_check - Send the init event to CP, wait a certain time and * set CP to runtime with the context information * @ipc_imem: Pointer to imem data-struct */ void ipc_imem_ipc_init_check(struct iosm_imem *ipc_imem); /** * ipc_imem_channel_init - Initialize the channel list with UL/DL pipe pairs. * @ipc_imem: Pointer to imem data-struct * @ctype: Channel type * @chnl_cfg: Channel configuration struct * @irq_moderation: Timer in usec for irq_moderation */ void ipc_imem_channel_init(struct iosm_imem *ipc_imem, enum ipc_ctype ctype, struct ipc_chnl_cfg chnl_cfg, u32 irq_moderation); /** * ipc_imem_devlink_trigger_chip_info - Inform devlink that the chip * information are available if the * flashing to RAM interworking shall be * executed. * @ipc_imem: Pointer to imem structure * * Returns: 0 on success, -1 on failure */ int ipc_imem_devlink_trigger_chip_info(struct iosm_imem *ipc_imem); #endif