// SPDX-License-Identifier: GPL-2.0 /* * PCIe driver for Marvell Armada 370 and Armada XP SoCs * * Author: Thomas Petazzoni */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "../pci.h" #include "../pci-bridge-emul.h" /* * PCIe unit register offsets. */ #define PCIE_DEV_ID_OFF 0x0000 #define PCIE_CMD_OFF 0x0004 #define PCIE_DEV_REV_OFF 0x0008 #define PCIE_BAR_LO_OFF(n) (0x0010 + ((n) << 3)) #define PCIE_BAR_HI_OFF(n) (0x0014 + ((n) << 3)) #define PCIE_SSDEV_ID_OFF 0x002c #define PCIE_CAP_PCIEXP 0x0060 #define PCIE_CAP_PCIERR_OFF 0x0100 #define PCIE_BAR_CTRL_OFF(n) (0x1804 + (((n) - 1) * 4)) #define PCIE_WIN04_CTRL_OFF(n) (0x1820 + ((n) << 4)) #define PCIE_WIN04_BASE_OFF(n) (0x1824 + ((n) << 4)) #define PCIE_WIN04_REMAP_OFF(n) (0x182c + ((n) << 4)) #define PCIE_WIN5_CTRL_OFF 0x1880 #define PCIE_WIN5_BASE_OFF 0x1884 #define PCIE_WIN5_REMAP_OFF 0x188c #define PCIE_CONF_ADDR_OFF 0x18f8 #define PCIE_CONF_ADDR_EN 0x80000000 #define PCIE_CONF_REG(r) ((((r) & 0xf00) << 16) | ((r) & 0xfc)) #define PCIE_CONF_BUS(b) (((b) & 0xff) << 16) #define PCIE_CONF_DEV(d) (((d) & 0x1f) << 11) #define PCIE_CONF_FUNC(f) (((f) & 0x7) << 8) #define PCIE_CONF_ADDR(bus, devfn, where) \ (PCIE_CONF_BUS(bus) | PCIE_CONF_DEV(PCI_SLOT(devfn)) | \ PCIE_CONF_FUNC(PCI_FUNC(devfn)) | PCIE_CONF_REG(where) | \ PCIE_CONF_ADDR_EN) #define PCIE_CONF_DATA_OFF 0x18fc #define PCIE_INT_CAUSE_OFF 0x1900 #define PCIE_INT_UNMASK_OFF 0x1910 #define PCIE_INT_INTX(i) BIT(24+i) #define PCIE_INT_PM_PME BIT(28) #define PCIE_INT_ALL_MASK GENMASK(31, 0) #define PCIE_MASK_ERR_COR BIT(18) #define PCIE_MASK_ERR_NONFATAL BIT(17) #define PCIE_MASK_ERR_FATAL BIT(16) #define PCIE_MASK_FERR_DET BIT(10) #define PCIE_MASK_NFERR_DET BIT(9) #define PCIE_MASK_CORERR_DET BIT(8) #define PCIE_CTRL_OFF 0x1a00 #define PCIE_CTRL_X1_MODE 0x0001 #define PCIE_CTRL_RC_MODE BIT(1) #define PCIE_CTRL_MASTER_HOT_RESET BIT(24) #define PCIE_STAT_OFF 0x1a04 #define PCIE_STAT_BUS 0xff00 #define PCIE_STAT_DEV 0x1f0000 #define PCIE_STAT_LINK_DOWN BIT(0) #define PCIE_SSPL_OFF 0x1a0c #define PCIE_SSPL_VALUE_SHIFT 0 #define PCIE_SSPL_VALUE_MASK GENMASK(7, 0) #define PCIE_SSPL_SCALE_SHIFT 8 #define PCIE_SSPL_SCALE_MASK GENMASK(9, 8) #define PCIE_SSPL_MSGEN BIT(14) #define PCIE_SSPL_ENABLE BIT(16) #define PCIE_RC_RTSTA 0x1a14 #define PCIE_DEBUG_CTRL 0x1a60 #define PCIE_DEBUG_SOFT_RESET BIT(20) struct mvebu_pcie_port; /* Structure representing all PCIe interfaces */ struct mvebu_pcie { struct platform_device *pdev; struct mvebu_pcie_port *ports; struct resource io; struct resource realio; struct resource mem; int nports; }; struct mvebu_pcie_window { phys_addr_t base; phys_addr_t remap; size_t size; }; /* Structure representing one PCIe interface */ struct mvebu_pcie_port { char *name; void __iomem *base; u32 port; u32 lane; bool is_x4; int devfn; unsigned int mem_target; unsigned int mem_attr; unsigned int io_target; unsigned int io_attr; struct clk *clk; struct gpio_desc *reset_gpio; char *reset_name; struct pci_bridge_emul bridge; struct device_node *dn; struct mvebu_pcie *pcie; struct mvebu_pcie_window memwin; struct mvebu_pcie_window iowin; u32 saved_pcie_stat; struct resource regs; u8 slot_power_limit_value; u8 slot_power_limit_scale; struct irq_domain *intx_irq_domain; raw_spinlock_t irq_lock; int intx_irq; }; static inline void mvebu_writel(struct mvebu_pcie_port *port, u32 val, u32 reg) { writel(val, port->base + reg); } static inline u32 mvebu_readl(struct mvebu_pcie_port *port, u32 reg) { return readl(port->base + reg); } static inline bool mvebu_has_ioport(struct mvebu_pcie_port *port) { return port->io_target != -1 && port->io_attr != -1; } static bool mvebu_pcie_link_up(struct mvebu_pcie_port *port) { return !(mvebu_readl(port, PCIE_STAT_OFF) & PCIE_STAT_LINK_DOWN); } static u8 mvebu_pcie_get_local_bus_nr(struct mvebu_pcie_port *port) { return (mvebu_readl(port, PCIE_STAT_OFF) & PCIE_STAT_BUS) >> 8; } static void mvebu_pcie_set_local_bus_nr(struct mvebu_pcie_port *port, int nr) { u32 stat; stat = mvebu_readl(port, PCIE_STAT_OFF); stat &= ~PCIE_STAT_BUS; stat |= nr << 8; mvebu_writel(port, stat, PCIE_STAT_OFF); } static void mvebu_pcie_set_local_dev_nr(struct mvebu_pcie_port *port, int nr) { u32 stat; stat = mvebu_readl(port, PCIE_STAT_OFF); stat &= ~PCIE_STAT_DEV; stat |= nr << 16; mvebu_writel(port, stat, PCIE_STAT_OFF); } static void mvebu_pcie_disable_wins(struct mvebu_pcie_port *port) { int i; mvebu_writel(port, 0, PCIE_BAR_LO_OFF(0)); mvebu_writel(port, 0, PCIE_BAR_HI_OFF(0)); for (i = 1; i < 3; i++) { mvebu_writel(port, 0, PCIE_BAR_CTRL_OFF(i)); mvebu_writel(port, 0, PCIE_BAR_LO_OFF(i)); mvebu_writel(port, 0, PCIE_BAR_HI_OFF(i)); } for (i = 0; i < 5; i++) { mvebu_writel(port, 0, PCIE_WIN04_CTRL_OFF(i)); mvebu_writel(port, 0, PCIE_WIN04_BASE_OFF(i)); mvebu_writel(port, 0, PCIE_WIN04_REMAP_OFF(i)); } mvebu_writel(port, 0, PCIE_WIN5_CTRL_OFF); mvebu_writel(port, 0, PCIE_WIN5_BASE_OFF); mvebu_writel(port, 0, PCIE_WIN5_REMAP_OFF); } /* * Setup PCIE BARs and Address Decode Wins: * BAR[0] -> internal registers (needed for MSI) * BAR[1] -> covers all DRAM banks * BAR[2] -> Disabled * WIN[0-3] -> DRAM bank[0-3] */ static void mvebu_pcie_setup_wins(struct mvebu_pcie_port *port) { const struct mbus_dram_target_info *dram; u32 size; int i; dram = mv_mbus_dram_info(); /* First, disable and clear BARs and windows. */ mvebu_pcie_disable_wins(port); /* Setup windows for DDR banks. Count total DDR size on the fly. */ size = 0; for (i = 0; i < dram->num_cs; i++) { const struct mbus_dram_window *cs = dram->cs + i; mvebu_writel(port, cs->base & 0xffff0000, PCIE_WIN04_BASE_OFF(i)); mvebu_writel(port, 0, PCIE_WIN04_REMAP_OFF(i)); mvebu_writel(port, ((cs->size - 1) & 0xffff0000) | (cs->mbus_attr << 8) | (dram->mbus_dram_target_id << 4) | 1, PCIE_WIN04_CTRL_OFF(i)); size += cs->size; } /* Round up 'size' to the nearest power of two. */ if ((size & (size - 1)) != 0) size = 1 << fls(size); /* Setup BAR[1] to all DRAM banks. */ mvebu_writel(port, dram->cs[0].base, PCIE_BAR_LO_OFF(1)); mvebu_writel(port, 0, PCIE_BAR_HI_OFF(1)); mvebu_writel(port, ((size - 1) & 0xffff0000) | 1, PCIE_BAR_CTRL_OFF(1)); /* * Point BAR[0] to the device's internal registers. */ mvebu_writel(port, round_down(port->regs.start, SZ_1M), PCIE_BAR_LO_OFF(0)); mvebu_writel(port, 0, PCIE_BAR_HI_OFF(0)); } static void mvebu_pcie_setup_hw(struct mvebu_pcie_port *port) { u32 ctrl, lnkcap, cmd, dev_rev, unmask, sspl; /* Setup PCIe controller to Root Complex mode. */ ctrl = mvebu_readl(port, PCIE_CTRL_OFF); ctrl |= PCIE_CTRL_RC_MODE; mvebu_writel(port, ctrl, PCIE_CTRL_OFF); /* * Set Maximum Link Width to X1 or X4 in Root Port's PCIe Link * Capability register. This register is defined by PCIe specification * as read-only but this mvebu controller has it as read-write and must * be set to number of SerDes PCIe lanes (1 or 4). If this register is * not set correctly then link with endpoint card is not established. */ lnkcap = mvebu_readl(port, PCIE_CAP_PCIEXP + PCI_EXP_LNKCAP); lnkcap &= ~PCI_EXP_LNKCAP_MLW; lnkcap |= FIELD_PREP(PCI_EXP_LNKCAP_MLW, port->is_x4 ? 4 : 1); mvebu_writel(port, lnkcap, PCIE_CAP_PCIEXP + PCI_EXP_LNKCAP); /* Disable Root Bridge I/O space, memory space and bus mastering. */ cmd = mvebu_readl(port, PCIE_CMD_OFF); cmd &= ~(PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER); mvebu_writel(port, cmd, PCIE_CMD_OFF); /* * Change Class Code of PCI Bridge device to PCI Bridge (0x6004) * because default value is Memory controller (0x5080). * * Note that this mvebu PCI Bridge does not have compliant Type 1 * Configuration Space. Header Type is reported as Type 0 and it * has format of Type 0 config space. * * Moreover Type 0 BAR registers (ranges 0x10 - 0x28 and 0x30 - 0x34) * have the same format in Marvell's specification as in PCIe * specification, but their meaning is totally different and they do * different things: they are aliased into internal mvebu registers * (e.g. PCIE_BAR_LO_OFF) and these should not be changed or * reconfigured by pci device drivers. * * Therefore driver uses emulation of PCI Bridge which emulates * access to configuration space via internal mvebu registers or * emulated configuration buffer. Driver access these PCI Bridge * directly for simplification, but these registers can be accessed * also via standard mvebu way for accessing PCI config space. */ dev_rev = mvebu_readl(port, PCIE_DEV_REV_OFF); dev_rev &= ~0xffffff00; dev_rev |= PCI_CLASS_BRIDGE_PCI_NORMAL << 8; mvebu_writel(port, dev_rev, PCIE_DEV_REV_OFF); /* Point PCIe unit MBUS decode windows to DRAM space. */ mvebu_pcie_setup_wins(port); /* * Program Root Port to automatically send Set_Slot_Power_Limit * PCIe Message when changing status from Dl_Down to Dl_Up and valid * slot power limit was specified. */ sspl = mvebu_readl(port, PCIE_SSPL_OFF); sspl &= ~(PCIE_SSPL_VALUE_MASK | PCIE_SSPL_SCALE_MASK | PCIE_SSPL_ENABLE); if (port->slot_power_limit_value) { sspl |= port->slot_power_limit_value << PCIE_SSPL_VALUE_SHIFT; sspl |= port->slot_power_limit_scale << PCIE_SSPL_SCALE_SHIFT; sspl |= PCIE_SSPL_ENABLE; } mvebu_writel(port, sspl, PCIE_SSPL_OFF); /* Mask all interrupt sources. */ mvebu_writel(port, ~PCIE_INT_ALL_MASK, PCIE_INT_UNMASK_OFF); /* Clear all interrupt causes. */ mvebu_writel(port, ~PCIE_INT_ALL_MASK, PCIE_INT_CAUSE_OFF); /* Check if "intx" interrupt was specified in DT. */ if (port->intx_irq > 0) return; /* * Fallback code when "intx" interrupt was not specified in DT: * Unmask all legacy INTx interrupts as driver does not provide a way * for masking and unmasking of individual legacy INTx interrupts. * Legacy INTx are reported via one shared GIC source and therefore * kernel cannot distinguish which individual legacy INTx was triggered. * These interrupts are shared, so it should not cause any issue. Just * performance penalty as every PCIe interrupt handler needs to be * called when some interrupt is triggered. */ unmask = mvebu_readl(port, PCIE_INT_UNMASK_OFF); unmask |= PCIE_INT_INTX(0) | PCIE_INT_INTX(1) | PCIE_INT_INTX(2) | PCIE_INT_INTX(3); mvebu_writel(port, unmask, PCIE_INT_UNMASK_OFF); } static struct mvebu_pcie_port *mvebu_pcie_find_port(struct mvebu_pcie *pcie, struct pci_bus *bus, int devfn); static int mvebu_pcie_child_rd_conf(struct pci_bus *bus, u32 devfn, int where, int size, u32 *val) { struct mvebu_pcie *pcie = bus->sysdata; struct mvebu_pcie_port *port; void __iomem *conf_data; port = mvebu_pcie_find_port(pcie, bus, devfn); if (!port) return PCIBIOS_DEVICE_NOT_FOUND; if (!mvebu_pcie_link_up(port)) return PCIBIOS_DEVICE_NOT_FOUND; conf_data = port->base + PCIE_CONF_DATA_OFF; mvebu_writel(port, PCIE_CONF_ADDR(bus->number, devfn, where), PCIE_CONF_ADDR_OFF); switch (size) { case 1: *val = readb_relaxed(conf_data + (where & 3)); break; case 2: *val = readw_relaxed(conf_data + (where & 2)); break; case 4: *val = readl_relaxed(conf_data); break; default: return PCIBIOS_BAD_REGISTER_NUMBER; } return PCIBIOS_SUCCESSFUL; } static int mvebu_pcie_child_wr_conf(struct pci_bus *bus, u32 devfn, int where, int size, u32 val) { struct mvebu_pcie *pcie = bus->sysdata; struct mvebu_pcie_port *port; void __iomem *conf_data; port = mvebu_pcie_find_port(pcie, bus, devfn); if (!port) return PCIBIOS_DEVICE_NOT_FOUND; if (!mvebu_pcie_link_up(port)) return PCIBIOS_DEVICE_NOT_FOUND; conf_data = port->base + PCIE_CONF_DATA_OFF; mvebu_writel(port, PCIE_CONF_ADDR(bus->number, devfn, where), PCIE_CONF_ADDR_OFF); switch (size) { case 1: writeb(val, conf_data + (where & 3)); break; case 2: writew(val, conf_data + (where & 2)); break; case 4: writel(val, conf_data); break; default: return PCIBIOS_BAD_REGISTER_NUMBER; } return PCIBIOS_SUCCESSFUL; } static struct pci_ops mvebu_pcie_child_ops = { .read = mvebu_pcie_child_rd_conf, .write = mvebu_pcie_child_wr_conf, }; /* * Remove windows, starting from the largest ones to the smallest * ones. */ static void mvebu_pcie_del_windows(struct mvebu_pcie_port *port, phys_addr_t base, size_t size) { while (size) { size_t sz = 1 << (fls(size) - 1); mvebu_mbus_del_window(base, sz); base += sz; size -= sz; } } /* * MBus windows can only have a power of two size, but PCI BARs do not * have this constraint. Therefore, we have to split the PCI BAR into * areas each having a power of two size. We start from the largest * one (i.e highest order bit set in the size). */ static int mvebu_pcie_add_windows(struct mvebu_pcie_port *port, unsigned int target, unsigned int attribute, phys_addr_t base, size_t size, phys_addr_t remap) { size_t size_mapped = 0; while (size) { size_t sz = 1 << (fls(size) - 1); int ret; ret = mvebu_mbus_add_window_remap_by_id(target, attribute, base, sz, remap); if (ret) { phys_addr_t end = base + sz - 1; dev_err(&port->pcie->pdev->dev, "Could not create MBus window at [mem %pa-%pa]: %d\n", &base, &end, ret); mvebu_pcie_del_windows(port, base - size_mapped, size_mapped); return ret; } size -= sz; size_mapped += sz; base += sz; if (remap != MVEBU_MBUS_NO_REMAP) remap += sz; } return 0; } static int mvebu_pcie_set_window(struct mvebu_pcie_port *port, unsigned int target, unsigned int attribute, const struct mvebu_pcie_window *desired, struct mvebu_pcie_window *cur) { int ret; if (desired->base == cur->base && desired->remap == cur->remap && desired->size == cur->size) return 0; if (cur->size != 0) { mvebu_pcie_del_windows(port, cur->base, cur->size); cur->size = 0; cur->base = 0; /* * If something tries to change the window while it is enabled * the change will not be done atomically. That would be * difficult to do in the general case. */ } if (desired->size == 0) return 0; ret = mvebu_pcie_add_windows(port, target, attribute, desired->base, desired->size, desired->remap); if (ret) { cur->size = 0; cur->base = 0; return ret; } *cur = *desired; return 0; } static int mvebu_pcie_handle_iobase_change(struct mvebu_pcie_port *port) { struct mvebu_pcie_window desired = {}; struct pci_bridge_emul_conf *conf = &port->bridge.conf; /* Are the new iobase/iolimit values invalid? */ if (conf->iolimit < conf->iobase || le16_to_cpu(conf->iolimitupper) < le16_to_cpu(conf->iobaseupper)) return mvebu_pcie_set_window(port, port->io_target, port->io_attr, &desired, &port->iowin); /* * We read the PCI-to-PCI bridge emulated registers, and * calculate the base address and size of the address decoding * window to setup, according to the PCI-to-PCI bridge * specifications. iobase is the bus address, port->iowin_base * is the CPU address. */ desired.remap = ((conf->iobase & 0xF0) << 8) | (le16_to_cpu(conf->iobaseupper) << 16); desired.base = port->pcie->io.start + desired.remap; desired.size = ((0xFFF | ((conf->iolimit & 0xF0) << 8) | (le16_to_cpu(conf->iolimitupper) << 16)) - desired.remap) + 1; return mvebu_pcie_set_window(port, port->io_target, port->io_attr, &desired, &port->iowin); } static int mvebu_pcie_handle_membase_change(struct mvebu_pcie_port *port) { struct mvebu_pcie_window desired = {.remap = MVEBU_MBUS_NO_REMAP}; struct pci_bridge_emul_conf *conf = &port->bridge.conf; /* Are the new membase/memlimit values invalid? */ if (le16_to_cpu(conf->memlimit) < le16_to_cpu(conf->membase)) return mvebu_pcie_set_window(port, port->mem_target, port->mem_attr, &desired, &port->memwin); /* * We read the PCI-to-PCI bridge emulated registers, and * calculate the base address and size of the address decoding * window to setup, according to the PCI-to-PCI bridge * specifications. */ desired.base = ((le16_to_cpu(conf->membase) & 0xFFF0) << 16); desired.size = (((le16_to_cpu(conf->memlimit) & 0xFFF0) << 16) | 0xFFFFF) - desired.base + 1; return mvebu_pcie_set_window(port, port->mem_target, port->mem_attr, &desired, &port->memwin); } static pci_bridge_emul_read_status_t mvebu_pci_bridge_emul_base_conf_read(struct pci_bridge_emul *bridge, int reg, u32 *value) { struct mvebu_pcie_port *port = bridge->data; switch (reg) { case PCI_COMMAND: *value = mvebu_readl(port, PCIE_CMD_OFF); break; case PCI_PRIMARY_BUS: { /* * From the whole 32bit register we support reading from HW only * secondary bus number which is mvebu local bus number. * Other bits are retrieved only from emulated config buffer. */ __le32 *cfgspace = (__le32 *)&bridge->conf; u32 val = le32_to_cpu(cfgspace[PCI_PRIMARY_BUS / 4]); val &= ~0xff00; val |= mvebu_pcie_get_local_bus_nr(port) << 8; *value = val; break; } case PCI_INTERRUPT_LINE: { /* * From the whole 32bit register we support reading from HW only * one bit: PCI_BRIDGE_CTL_BUS_RESET. * Other bits are retrieved only from emulated config buffer. */ __le32 *cfgspace = (__le32 *)&bridge->conf; u32 val = le32_to_cpu(cfgspace[PCI_INTERRUPT_LINE / 4]); if (mvebu_readl(port, PCIE_CTRL_OFF) & PCIE_CTRL_MASTER_HOT_RESET) val |= PCI_BRIDGE_CTL_BUS_RESET << 16; else val &= ~(PCI_BRIDGE_CTL_BUS_RESET << 16); *value = val; break; } default: return PCI_BRIDGE_EMUL_NOT_HANDLED; } return PCI_BRIDGE_EMUL_HANDLED; } static void mvebu_pcie_handle_irq_change(struct mvebu_pcie_port *port) { u32 reg, old; u16 devctl, rtctl; /* * Errors from downstream devices: * bridge control register SERR: enables reception of errors * Errors from this device, or received errors: * command SERR: enables ERR_NONFATAL and ERR_FATAL messages * => when enabled, these conditions also flag SERR in status register * devctl CERE: enables ERR_CORR messages * devctl NFERE: enables ERR_NONFATAL messages * devctl FERE: enables ERR_FATAL messages * Enabled messages then have three paths: * 1. rtctl: enables system error indication * 2. root error status register updated * 3. root error command register: forwarding via MSI */ old = mvebu_readl(port, PCIE_INT_UNMASK_OFF); reg = old & ~(PCIE_INT_PM_PME | PCIE_MASK_FERR_DET | PCIE_MASK_NFERR_DET | PCIE_MASK_CORERR_DET | PCIE_MASK_ERR_COR | PCIE_MASK_ERR_NONFATAL | PCIE_MASK_ERR_FATAL); devctl = port->bridge.pcie_conf.devctl; if (devctl & PCI_EXP_DEVCTL_FERE) reg |= PCIE_MASK_FERR_DET | PCIE_MASK_ERR_FATAL; if (devctl & PCI_EXP_DEVCTL_NFERE) reg |= PCIE_MASK_NFERR_DET | PCIE_MASK_ERR_NONFATAL; if (devctl & PCI_EXP_DEVCTL_CERE) reg |= PCIE_MASK_CORERR_DET | PCIE_MASK_ERR_COR; if (port->bridge.conf.command & PCI_COMMAND_SERR) reg |= PCIE_MASK_FERR_DET | PCIE_MASK_NFERR_DET | PCIE_MASK_ERR_FATAL | PCIE_MASK_ERR_NONFATAL; if (!(port->bridge.conf.bridgectrl & PCI_BRIDGE_CTL_SERR)) reg &= ~(PCIE_MASK_ERR_COR | PCIE_MASK_ERR_NONFATAL | PCIE_MASK_ERR_FATAL); rtctl = port->bridge.pcie_conf.rootctl; if (rtctl & PCI_EXP_RTCTL_PMEIE) reg |= PCIE_INT_PM_PME; if (old != reg) mvebu_writel(port, reg, PCIE_INT_UNMASK_OFF); } static pci_bridge_emul_read_status_t mvebu_pci_bridge_emul_pcie_conf_read(struct pci_bridge_emul *bridge, int reg, u32 *value) { struct mvebu_pcie_port *port = bridge->data; switch (reg) { case PCI_EXP_DEVCAP: *value = mvebu_readl(port, PCIE_CAP_PCIEXP + PCI_EXP_DEVCAP); break; case PCI_EXP_DEVCTL: *value = mvebu_readl(port, PCIE_CAP_PCIEXP + PCI_EXP_DEVCTL); break; case PCI_EXP_LNKCAP: /* * PCIe requires that the Clock Power Management capability bit * is hard-wired to zero for downstream ports but HW returns 1. * Additionally enable Data Link Layer Link Active Reporting * Capable bit as DL_Active indication is provided too. */ *value = (mvebu_readl(port, PCIE_CAP_PCIEXP + PCI_EXP_LNKCAP) & ~PCI_EXP_LNKCAP_CLKPM) | PCI_EXP_LNKCAP_DLLLARC; break; case PCI_EXP_LNKCTL: /* DL_Active indication is provided via PCIE_STAT_OFF */ *value = mvebu_readl(port, PCIE_CAP_PCIEXP + PCI_EXP_LNKCTL) | (mvebu_pcie_link_up(port) ? (PCI_EXP_LNKSTA_DLLLA << 16) : 0); break; case PCI_EXP_SLTCAP: { u32 tmp = mvebu_readl(port, PCIE_SSPL_OFF); *value = FIELD_GET(PCIE_SSPL_SCALE_MASK, tmp) << 15 | FIELD_GET(PCIE_SSPL_VALUE_MASK, tmp) << 7; break; } case PCI_EXP_SLTCTL: { u16 slotctl = le16_to_cpu(bridge->pcie_conf.slotctl); u16 slotsta = le16_to_cpu(bridge->pcie_conf.slotsta); u32 val = 0; /* * When slot power limit was not specified in DT then * ASPL_DISABLE bit is stored only in emulated config space. * Otherwise reflect status of PCIE_SSPL_ENABLE bit in HW. */ if (!port->slot_power_limit_value) val |= slotctl & PCI_EXP_SLTCTL_ASPL_DISABLE; else if (!(mvebu_readl(port, PCIE_SSPL_OFF) & PCIE_SSPL_ENABLE)) val |= PCI_EXP_SLTCTL_ASPL_DISABLE; /* This callback is 32-bit and in high bits is slot status. */ val |= slotsta << 16; *value = val; break; } case PCI_EXP_RTSTA: *value = mvebu_readl(port, PCIE_RC_RTSTA); break; case PCI_EXP_DEVCAP2: *value = mvebu_readl(port, PCIE_CAP_PCIEXP + PCI_EXP_DEVCAP2); break; case PCI_EXP_DEVCTL2: *value = mvebu_readl(port, PCIE_CAP_PCIEXP + PCI_EXP_DEVCTL2); break; case PCI_EXP_LNKCTL2: *value = mvebu_readl(port, PCIE_CAP_PCIEXP + PCI_EXP_LNKCTL2); break; default: return PCI_BRIDGE_EMUL_NOT_HANDLED; } return PCI_BRIDGE_EMUL_HANDLED; } static pci_bridge_emul_read_status_t mvebu_pci_bridge_emul_ext_conf_read(struct pci_bridge_emul *bridge, int reg, u32 *value) { struct mvebu_pcie_port *port = bridge->data; switch (reg) { case 0: case PCI_ERR_UNCOR_STATUS: case PCI_ERR_UNCOR_MASK: case PCI_ERR_UNCOR_SEVER: case PCI_ERR_COR_STATUS: case PCI_ERR_COR_MASK: case PCI_ERR_CAP: case PCI_ERR_HEADER_LOG+0: case PCI_ERR_HEADER_LOG+4: case PCI_ERR_HEADER_LOG+8: case PCI_ERR_HEADER_LOG+12: case PCI_ERR_ROOT_COMMAND: case PCI_ERR_ROOT_STATUS: case PCI_ERR_ROOT_ERR_SRC: *value = mvebu_readl(port, PCIE_CAP_PCIERR_OFF + reg); break; default: return PCI_BRIDGE_EMUL_NOT_HANDLED; } return PCI_BRIDGE_EMUL_HANDLED; } static void mvebu_pci_bridge_emul_base_conf_write(struct pci_bridge_emul *bridge, int reg, u32 old, u32 new, u32 mask) { struct mvebu_pcie_port *port = bridge->data; struct pci_bridge_emul_conf *conf = &bridge->conf; switch (reg) { case PCI_COMMAND: mvebu_writel(port, new, PCIE_CMD_OFF); if ((old ^ new) & PCI_COMMAND_SERR) mvebu_pcie_handle_irq_change(port); break; case PCI_IO_BASE: if ((mask & 0xffff) && mvebu_has_ioport(port) && mvebu_pcie_handle_iobase_change(port)) { /* On error disable IO range */ conf->iobase &= ~0xf0; conf->iolimit &= ~0xf0; conf->iobase |= 0xf0; conf->iobaseupper = cpu_to_le16(0x0000); conf->iolimitupper = cpu_to_le16(0x0000); } break; case PCI_MEMORY_BASE: if (mvebu_pcie_handle_membase_change(port)) { /* On error disable mem range */ conf->membase = cpu_to_le16(le16_to_cpu(conf->membase) & ~0xfff0); conf->memlimit = cpu_to_le16(le16_to_cpu(conf->memlimit) & ~0xfff0); conf->membase = cpu_to_le16(le16_to_cpu(conf->membase) | 0xfff0); } break; case PCI_IO_BASE_UPPER16: if (mvebu_has_ioport(port) && mvebu_pcie_handle_iobase_change(port)) { /* On error disable IO range */ conf->iobase &= ~0xf0; conf->iolimit &= ~0xf0; conf->iobase |= 0xf0; conf->iobaseupper = cpu_to_le16(0x0000); conf->iolimitupper = cpu_to_le16(0x0000); } break; case PCI_PRIMARY_BUS: if (mask & 0xff00) mvebu_pcie_set_local_bus_nr(port, conf->secondary_bus); break; case PCI_INTERRUPT_LINE: if (((old ^ new) >> 16) & PCI_BRIDGE_CTL_SERR) mvebu_pcie_handle_irq_change(port); if (mask & (PCI_BRIDGE_CTL_BUS_RESET << 16)) { u32 ctrl = mvebu_readl(port, PCIE_CTRL_OFF); if (new & (PCI_BRIDGE_CTL_BUS_RESET << 16)) ctrl |= PCIE_CTRL_MASTER_HOT_RESET; else ctrl &= ~PCIE_CTRL_MASTER_HOT_RESET; mvebu_writel(port, ctrl, PCIE_CTRL_OFF); } break; default: break; } } static void mvebu_pci_bridge_emul_pcie_conf_write(struct pci_bridge_emul *bridge, int reg, u32 old, u32 new, u32 mask) { struct mvebu_pcie_port *port = bridge->data; switch (reg) { case PCI_EXP_DEVCTL: /* * Armada370 data says these bits must always * be zero when in root complex mode. */ new &= ~(PCI_EXP_DEVCTL_URRE | PCI_EXP_DEVCTL_FERE | PCI_EXP_DEVCTL_NFERE | PCI_EXP_DEVCTL_CERE); mvebu_writel(port, new, PCIE_CAP_PCIEXP + PCI_EXP_DEVCTL); if ((new ^ old) & (PCI_EXP_DEVCTL_FERE | PCI_EXP_DEVCTL_NFERE | PCI_EXP_DEVCTL_CERE | PCI_EXP_DEVCTL_URRE)) mvebu_pcie_handle_irq_change(port); break; case PCI_EXP_LNKCTL: /* * PCIe requires that the Enable Clock Power Management bit * is hard-wired to zero for downstream ports but HW allows * to change it. */ new &= ~PCI_EXP_LNKCTL_CLKREQ_EN; mvebu_writel(port, new, PCIE_CAP_PCIEXP + PCI_EXP_LNKCTL); break; case PCI_EXP_SLTCAP: { u32 sspl = FIELD_PREP(PCIE_SSPL_VALUE_MASK, FIELD_GET(PCI_EXP_SLTCAP_SPLV, new)) | FIELD_PREP(PCIE_SSPL_SCALE_MASK, FIELD_GET(PCI_EXP_SLTCAP_SPLS, new)) | PCIE_SSPL_MSGEN; mvebu_writel(port, sspl, PCIE_SSPL_OFF); break; } case PCI_EXP_SLTCTL: /* * Allow to change PCIE_SSPL_ENABLE bit only when slot power * limit was specified in DT and configured into HW. */ if ((mask & PCI_EXP_SLTCTL_ASPL_DISABLE) && port->slot_power_limit_value) { u32 sspl = mvebu_readl(port, PCIE_SSPL_OFF); if (new & PCI_EXP_SLTCTL_ASPL_DISABLE) sspl &= ~PCIE_SSPL_ENABLE; else sspl |= PCIE_SSPL_ENABLE; mvebu_writel(port, sspl, PCIE_SSPL_OFF); } break; case PCI_EXP_RTSTA: /* * PME Status bit in Root Status Register (PCIE_RC_RTSTA) * is read-only and can be cleared only by writing 0b to the * Interrupt Cause RW0C register (PCIE_INT_CAUSE_OFF). So * clear PME via Interrupt Cause. */ if (new & PCI_EXP_RTSTA_PME) mvebu_writel(port, ~PCIE_INT_PM_PME, PCIE_INT_CAUSE_OFF); break; case PCI_EXP_DEVCTL2: mvebu_writel(port, new, PCIE_CAP_PCIEXP + PCI_EXP_DEVCTL2); break; case PCI_EXP_LNKCTL2: mvebu_writel(port, new, PCIE_CAP_PCIEXP + PCI_EXP_LNKCTL2); break; default: break; case PCI_EXP_RTCTL: if ((new ^ old) & (PCI_EXP_RTCTL_SECEE | PCI_EXP_RTCTL_SENFEE | PCI_EXP_RTCTL_SEFEE | PCI_EXP_RTCTL_PMEIE)) mvebu_pcie_handle_irq_change(port); break; } } static void mvebu_pci_bridge_emul_ext_conf_write(struct pci_bridge_emul *bridge, int reg, u32 old, u32 new, u32 mask) { struct mvebu_pcie_port *port = bridge->data; switch (reg) { /* These are W1C registers, so clear other bits */ case PCI_ERR_UNCOR_STATUS: case PCI_ERR_COR_STATUS: case PCI_ERR_ROOT_STATUS: new &= mask; fallthrough; case PCI_ERR_UNCOR_MASK: case PCI_ERR_UNCOR_SEVER: case PCI_ERR_COR_MASK: case PCI_ERR_CAP: case PCI_ERR_HEADER_LOG+0: case PCI_ERR_HEADER_LOG+4: case PCI_ERR_HEADER_LOG+8: case PCI_ERR_HEADER_LOG+12: case PCI_ERR_ROOT_COMMAND: case PCI_ERR_ROOT_ERR_SRC: mvebu_writel(port, new, PCIE_CAP_PCIERR_OFF + reg); break; default: break; } } static const struct pci_bridge_emul_ops mvebu_pci_bridge_emul_ops = { .read_base = mvebu_pci_bridge_emul_base_conf_read, .write_base = mvebu_pci_bridge_emul_base_conf_write, .read_pcie = mvebu_pci_bridge_emul_pcie_conf_read, .write_pcie = mvebu_pci_bridge_emul_pcie_conf_write, .read_ext = mvebu_pci_bridge_emul_ext_conf_read, .write_ext = mvebu_pci_bridge_emul_ext_conf_write, }; /* * Initialize the configuration space of the PCI-to-PCI bridge * associated with the given PCIe interface. */ static int mvebu_pci_bridge_emul_init(struct mvebu_pcie_port *port) { unsigned int bridge_flags = PCI_BRIDGE_EMUL_NO_PREFMEM_FORWARD; struct pci_bridge_emul *bridge = &port->bridge; u32 dev_id = mvebu_readl(port, PCIE_DEV_ID_OFF); u32 dev_rev = mvebu_readl(port, PCIE_DEV_REV_OFF); u32 ssdev_id = mvebu_readl(port, PCIE_SSDEV_ID_OFF); u32 pcie_cap = mvebu_readl(port, PCIE_CAP_PCIEXP); u8 pcie_cap_ver = ((pcie_cap >> 16) & PCI_EXP_FLAGS_VERS); bridge->conf.vendor = cpu_to_le16(dev_id & 0xffff); bridge->conf.device = cpu_to_le16(dev_id >> 16); bridge->conf.class_revision = cpu_to_le32(dev_rev & 0xff); if (mvebu_has_ioport(port)) { /* We support 32 bits I/O addressing */ bridge->conf.iobase = PCI_IO_RANGE_TYPE_32; bridge->conf.iolimit = PCI_IO_RANGE_TYPE_32; } else { bridge_flags |= PCI_BRIDGE_EMUL_NO_IO_FORWARD; } /* * Older mvebu hardware provides PCIe Capability structure only in * version 1. New hardware provides it in version 2. * Enable slot support which is emulated. */ bridge->pcie_conf.cap = cpu_to_le16(pcie_cap_ver | PCI_EXP_FLAGS_SLOT); /* * Set Presence Detect State bit permanently as there is no support for * unplugging PCIe card from the slot. Assume that PCIe card is always * connected in slot. * * Set physical slot number to port+1 as mvebu ports are indexed from * zero and zero value is reserved for ports within the same silicon * as Root Port which is not mvebu case. * * Also set correct slot power limit. */ bridge->pcie_conf.slotcap = cpu_to_le32( FIELD_PREP(PCI_EXP_SLTCAP_SPLV, port->slot_power_limit_value) | FIELD_PREP(PCI_EXP_SLTCAP_SPLS, port->slot_power_limit_scale) | FIELD_PREP(PCI_EXP_SLTCAP_PSN, port->port+1)); bridge->pcie_conf.slotsta = cpu_to_le16(PCI_EXP_SLTSTA_PDS); bridge->subsystem_vendor_id = ssdev_id & 0xffff; bridge->subsystem_id = ssdev_id >> 16; bridge->has_pcie = true; bridge->pcie_start = PCIE_CAP_PCIEXP; bridge->data = port; bridge->ops = &mvebu_pci_bridge_emul_ops; return pci_bridge_emul_init(bridge, bridge_flags); } static inline struct mvebu_pcie *sys_to_pcie(struct pci_sys_data *sys) { return sys->private_data; } static struct mvebu_pcie_port *mvebu_pcie_find_port(struct mvebu_pcie *pcie, struct pci_bus *bus, int devfn) { int i; for (i = 0; i < pcie->nports; i++) { struct mvebu_pcie_port *port = &pcie->ports[i]; if (!port->base) continue; if (bus->number == 0 && port->devfn == devfn) return port; if (bus->number != 0 && bus->number >= port->bridge.conf.secondary_bus && bus->number <= port->bridge.conf.subordinate_bus) return port; } return NULL; } /* PCI configuration space write function */ static int mvebu_pcie_wr_conf(struct pci_bus *bus, u32 devfn, int where, int size, u32 val) { struct mvebu_pcie *pcie = bus->sysdata; struct mvebu_pcie_port *port; port = mvebu_pcie_find_port(pcie, bus, devfn); if (!port) return PCIBIOS_DEVICE_NOT_FOUND; return pci_bridge_emul_conf_write(&port->bridge, where, size, val); } /* PCI configuration space read function */ static int mvebu_pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where, int size, u32 *val) { struct mvebu_pcie *pcie = bus->sysdata; struct mvebu_pcie_port *port; port = mvebu_pcie_find_port(pcie, bus, devfn); if (!port) return PCIBIOS_DEVICE_NOT_FOUND; return pci_bridge_emul_conf_read(&port->bridge, where, size, val); } static struct pci_ops mvebu_pcie_ops = { .read = mvebu_pcie_rd_conf, .write = mvebu_pcie_wr_conf, }; static void mvebu_pcie_intx_irq_mask(struct irq_data *d) { struct mvebu_pcie_port *port = d->domain->host_data; irq_hw_number_t hwirq = irqd_to_hwirq(d); unsigned long flags; u32 unmask; raw_spin_lock_irqsave(&port->irq_lock, flags); unmask = mvebu_readl(port, PCIE_INT_UNMASK_OFF); unmask &= ~PCIE_INT_INTX(hwirq); mvebu_writel(port, unmask, PCIE_INT_UNMASK_OFF); raw_spin_unlock_irqrestore(&port->irq_lock, flags); } static void mvebu_pcie_intx_irq_unmask(struct irq_data *d) { struct mvebu_pcie_port *port = d->domain->host_data; irq_hw_number_t hwirq = irqd_to_hwirq(d); unsigned long flags; u32 unmask; raw_spin_lock_irqsave(&port->irq_lock, flags); unmask = mvebu_readl(port, PCIE_INT_UNMASK_OFF); unmask |= PCIE_INT_INTX(hwirq); mvebu_writel(port, unmask, PCIE_INT_UNMASK_OFF); raw_spin_unlock_irqrestore(&port->irq_lock, flags); } static struct irq_chip intx_irq_chip = { .name = "mvebu-INTx", .irq_mask = mvebu_pcie_intx_irq_mask, .irq_unmask = mvebu_pcie_intx_irq_unmask, }; static int mvebu_pcie_intx_irq_map(struct irq_domain *h, unsigned int virq, irq_hw_number_t hwirq) { struct mvebu_pcie_port *port = h->host_data; irq_set_status_flags(virq, IRQ_LEVEL); irq_set_chip_and_handler(virq, &intx_irq_chip, handle_level_irq); irq_set_chip_data(virq, port); return 0; } static const struct irq_domain_ops mvebu_pcie_intx_irq_domain_ops = { .map = mvebu_pcie_intx_irq_map, .xlate = irq_domain_xlate_onecell, }; static int mvebu_pcie_init_irq_domain(struct mvebu_pcie_port *port) { struct device *dev = &port->pcie->pdev->dev; struct device_node *pcie_intc_node; raw_spin_lock_init(&port->irq_lock); pcie_intc_node = of_get_next_child(port->dn, NULL); if (!pcie_intc_node) { dev_err(dev, "No PCIe Intc node found for %s\n", port->name); return -ENODEV; } port->intx_irq_domain = irq_domain_add_linear(pcie_intc_node, PCI_NUM_INTX, &mvebu_pcie_intx_irq_domain_ops, port); of_node_put(pcie_intc_node); if (!port->intx_irq_domain) { dev_err(dev, "Failed to get INTx IRQ domain for %s\n", port->name); return -ENOMEM; } return 0; } static void mvebu_pcie_irq_handler(struct irq_desc *desc) { struct mvebu_pcie_port *port = irq_desc_get_handler_data(desc); struct irq_chip *chip = irq_desc_get_chip(desc); struct device *dev = &port->pcie->pdev->dev; u32 cause, unmask, status; int i; chained_irq_enter(chip, desc); cause = mvebu_readl(port, PCIE_INT_CAUSE_OFF); unmask = mvebu_readl(port, PCIE_INT_UNMASK_OFF); status = cause & unmask; /* Process legacy INTx interrupts */ for (i = 0; i < PCI_NUM_INTX; i++) { if (!(status & PCIE_INT_INTX(i))) continue; if (generic_handle_domain_irq(port->intx_irq_domain, i) == -EINVAL) dev_err_ratelimited(dev, "unexpected INT%c IRQ\n", (char)i+'A'); } chained_irq_exit(chip, desc); } static int mvebu_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { /* Interrupt support on mvebu emulated bridges is not implemented yet */ if (dev->bus->number == 0) return 0; /* Proper return code 0 == NO_IRQ */ return of_irq_parse_and_map_pci(dev, slot, pin); } static resource_size_t mvebu_pcie_align_resource(struct pci_dev *dev, const struct resource *res, resource_size_t start, resource_size_t size, resource_size_t align) { if (dev->bus->number != 0) return start; /* * On the PCI-to-PCI bridge side, the I/O windows must have at * least a 64 KB size and the memory windows must have at * least a 1 MB size. Moreover, MBus windows need to have a * base address aligned on their size, and their size must be * a power of two. This means that if the BAR doesn't have a * power of two size, several MBus windows will actually be * created. We need to ensure that the biggest MBus window * (which will be the first one) is aligned on its size, which * explains the rounddown_pow_of_two() being done here. */ if (res->flags & IORESOURCE_IO) return round_up(start, max_t(resource_size_t, SZ_64K, rounddown_pow_of_two(size))); else if (res->flags & IORESOURCE_MEM) return round_up(start, max_t(resource_size_t, SZ_1M, rounddown_pow_of_two(size))); else return start; } static void __iomem *mvebu_pcie_map_registers(struct platform_device *pdev, struct device_node *np, struct mvebu_pcie_port *port) { int ret = 0; ret = of_address_to_resource(np, 0, &port->regs); if (ret) return (void __iomem *)ERR_PTR(ret); return devm_ioremap_resource(&pdev->dev, &port->regs); } #define DT_FLAGS_TO_TYPE(flags) (((flags) >> 24) & 0x03) #define DT_TYPE_IO 0x1 #define DT_TYPE_MEM32 0x2 #define DT_CPUADDR_TO_TARGET(cpuaddr) (((cpuaddr) >> 56) & 0xFF) #define DT_CPUADDR_TO_ATTR(cpuaddr) (((cpuaddr) >> 48) & 0xFF) static int mvebu_get_tgt_attr(struct device_node *np, int devfn, unsigned long type, unsigned int *tgt, unsigned int *attr) { const int na = 3, ns = 2; const __be32 *range; int rlen, nranges, rangesz, pna, i; *tgt = -1; *attr = -1; range = of_get_property(np, "ranges", &rlen); if (!range) return -EINVAL; pna = of_n_addr_cells(np); rangesz = pna + na + ns; nranges = rlen / sizeof(__be32) / rangesz; for (i = 0; i < nranges; i++, range += rangesz) { u32 flags = of_read_number(range, 1); u32 slot = of_read_number(range + 1, 1); u64 cpuaddr = of_read_number(range + na, pna); unsigned long rtype; if (DT_FLAGS_TO_TYPE(flags) == DT_TYPE_IO) rtype = IORESOURCE_IO; else if (DT_FLAGS_TO_TYPE(flags) == DT_TYPE_MEM32) rtype = IORESOURCE_MEM; else continue; if (slot == PCI_SLOT(devfn) && type == rtype) { *tgt = DT_CPUADDR_TO_TARGET(cpuaddr); *attr = DT_CPUADDR_TO_ATTR(cpuaddr); return 0; } } return -ENOENT; } static int mvebu_pcie_suspend(struct device *dev) { struct mvebu_pcie *pcie; int i; pcie = dev_get_drvdata(dev); for (i = 0; i < pcie->nports; i++) { struct mvebu_pcie_port *port = pcie->ports + i; if (!port->base) continue; port->saved_pcie_stat = mvebu_readl(port, PCIE_STAT_OFF); } return 0; } static int mvebu_pcie_resume(struct device *dev) { struct mvebu_pcie *pcie; int i; pcie = dev_get_drvdata(dev); for (i = 0; i < pcie->nports; i++) { struct mvebu_pcie_port *port = pcie->ports + i; if (!port->base) continue; mvebu_writel(port, port->saved_pcie_stat, PCIE_STAT_OFF); mvebu_pcie_setup_hw(port); } return 0; } static void mvebu_pcie_port_clk_put(void *data) { struct mvebu_pcie_port *port = data; clk_put(port->clk); } static int mvebu_pcie_parse_port(struct mvebu_pcie *pcie, struct mvebu_pcie_port *port, struct device_node *child) { struct device *dev = &pcie->pdev->dev; u32 slot_power_limit; int ret; u32 num_lanes; port->pcie = pcie; if (of_property_read_u32(child, "marvell,pcie-port", &port->port)) { dev_warn(dev, "ignoring %pOF, missing pcie-port property\n", child); goto skip; } if (of_property_read_u32(child, "marvell,pcie-lane", &port->lane)) port->lane = 0; if (!of_property_read_u32(child, "num-lanes", &num_lanes) && num_lanes == 4) port->is_x4 = true; port->name = devm_kasprintf(dev, GFP_KERNEL, "pcie%d.%d", port->port, port->lane); if (!port->name) { ret = -ENOMEM; goto err; } port->devfn = of_pci_get_devfn(child); if (port->devfn < 0) goto skip; if (PCI_FUNC(port->devfn) != 0) { dev_err(dev, "%s: invalid function number, must be zero\n", port->name); goto skip; } ret = mvebu_get_tgt_attr(dev->of_node, port->devfn, IORESOURCE_MEM, &port->mem_target, &port->mem_attr); if (ret < 0) { dev_err(dev, "%s: cannot get tgt/attr for mem window\n", port->name); goto skip; } if (resource_size(&pcie->io) != 0) { mvebu_get_tgt_attr(dev->of_node, port->devfn, IORESOURCE_IO, &port->io_target, &port->io_attr); } else { port->io_target = -1; port->io_attr = -1; } /* * Old DT bindings do not contain "intx" interrupt * so do not fail probing driver when interrupt does not exist. */ port->intx_irq = of_irq_get_byname(child, "intx"); if (port->intx_irq == -EPROBE_DEFER) { ret = port->intx_irq; goto err; } if (port->intx_irq <= 0) { dev_warn(dev, "%s: legacy INTx interrupts cannot be masked individually, " "%pOF does not contain intx interrupt\n", port->name, child); } port->reset_name = devm_kasprintf(dev, GFP_KERNEL, "%s-reset", port->name); if (!port->reset_name) { ret = -ENOMEM; goto err; } port->reset_gpio = devm_fwnode_gpiod_get(dev, of_fwnode_handle(child), "reset", GPIOD_OUT_HIGH, port->name); ret = PTR_ERR_OR_ZERO(port->reset_gpio); if (ret) { if (ret != -ENOENT) goto err; /* reset gpio is optional */ port->reset_gpio = NULL; devm_kfree(dev, port->reset_name); port->reset_name = NULL; } slot_power_limit = of_pci_get_slot_power_limit(child, &port->slot_power_limit_value, &port->slot_power_limit_scale); if (slot_power_limit) dev_info(dev, "%s: Slot power limit %u.%uW\n", port->name, slot_power_limit / 1000, (slot_power_limit / 100) % 10); port->clk = of_clk_get_by_name(child, NULL); if (IS_ERR(port->clk)) { dev_err(dev, "%s: cannot get clock\n", port->name); goto skip; } ret = devm_add_action(dev, mvebu_pcie_port_clk_put, port); if (ret < 0) { clk_put(port->clk); goto err; } return 1; skip: ret = 0; /* In the case of skipping, we need to free these */ devm_kfree(dev, port->reset_name); port->reset_name = NULL; devm_kfree(dev, port->name); port->name = NULL; err: return ret; } /* * Power up a PCIe port. PCIe requires the refclk to be stable for 100µs * prior to releasing PERST. See table 2-4 in section 2.6.2 AC Specifications * of the PCI Express Card Electromechanical Specification, 1.1. */ static int mvebu_pcie_powerup(struct mvebu_pcie_port *port) { int ret; ret = clk_prepare_enable(port->clk); if (ret < 0) return ret; if (port->reset_gpio) { u32 reset_udelay = PCI_PM_D3COLD_WAIT * 1000; of_property_read_u32(port->dn, "reset-delay-us", &reset_udelay); udelay(100); gpiod_set_value_cansleep(port->reset_gpio, 0); msleep(reset_udelay / 1000); } return 0; } /* * Power down a PCIe port. Strictly, PCIe requires us to place the card * in D3hot state before asserting PERST#. */ static void mvebu_pcie_powerdown(struct mvebu_pcie_port *port) { gpiod_set_value_cansleep(port->reset_gpio, 1); clk_disable_unprepare(port->clk); } /* * devm_of_pci_get_host_bridge_resources() only sets up translateable resources, * so we need extra resource setup parsing our special DT properties encoding * the MEM and IO apertures. */ static int mvebu_pcie_parse_request_resources(struct mvebu_pcie *pcie) { struct device *dev = &pcie->pdev->dev; struct pci_host_bridge *bridge = pci_host_bridge_from_priv(pcie); int ret; /* Get the PCIe memory aperture */ mvebu_mbus_get_pcie_mem_aperture(&pcie->mem); if (resource_size(&pcie->mem) == 0) { dev_err(dev, "invalid memory aperture size\n"); return -EINVAL; } pcie->mem.name = "PCI MEM"; pci_add_resource(&bridge->windows, &pcie->mem); ret = devm_request_resource(dev, &iomem_resource, &pcie->mem); if (ret) return ret; /* Get the PCIe IO aperture */ mvebu_mbus_get_pcie_io_aperture(&pcie->io); if (resource_size(&pcie->io) != 0) { pcie->realio.flags = pcie->io.flags; pcie->realio.start = PCIBIOS_MIN_IO; pcie->realio.end = min_t(resource_size_t, IO_SPACE_LIMIT - SZ_64K, resource_size(&pcie->io) - 1); pcie->realio.name = "PCI I/O"; ret = devm_pci_remap_iospace(dev, &pcie->realio, pcie->io.start); if (ret) return ret; pci_add_resource(&bridge->windows, &pcie->realio); ret = devm_request_resource(dev, &ioport_resource, &pcie->realio); if (ret) return ret; } return 0; } static int mvebu_pcie_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct mvebu_pcie *pcie; struct pci_host_bridge *bridge; struct device_node *np = dev->of_node; struct device_node *child; int num, i, ret; bridge = devm_pci_alloc_host_bridge(dev, sizeof(struct mvebu_pcie)); if (!bridge) return -ENOMEM; pcie = pci_host_bridge_priv(bridge); pcie->pdev = pdev; platform_set_drvdata(pdev, pcie); ret = mvebu_pcie_parse_request_resources(pcie); if (ret) return ret; num = of_get_available_child_count(np); pcie->ports = devm_kcalloc(dev, num, sizeof(*pcie->ports), GFP_KERNEL); if (!pcie->ports) return -ENOMEM; i = 0; for_each_available_child_of_node(np, child) { struct mvebu_pcie_port *port = &pcie->ports[i]; ret = mvebu_pcie_parse_port(pcie, port, child); if (ret < 0) { of_node_put(child); return ret; } else if (ret == 0) { continue; } port->dn = child; i++; } pcie->nports = i; for (i = 0; i < pcie->nports; i++) { struct mvebu_pcie_port *port = &pcie->ports[i]; int irq = port->intx_irq; child = port->dn; if (!child) continue; ret = mvebu_pcie_powerup(port); if (ret < 0) continue; port->base = mvebu_pcie_map_registers(pdev, child, port); if (IS_ERR(port->base)) { dev_err(dev, "%s: cannot map registers\n", port->name); port->base = NULL; mvebu_pcie_powerdown(port); continue; } ret = mvebu_pci_bridge_emul_init(port); if (ret < 0) { dev_err(dev, "%s: cannot init emulated bridge\n", port->name); devm_iounmap(dev, port->base); port->base = NULL; mvebu_pcie_powerdown(port); continue; } if (irq > 0) { ret = mvebu_pcie_init_irq_domain(port); if (ret) { dev_err(dev, "%s: cannot init irq domain\n", port->name); pci_bridge_emul_cleanup(&port->bridge); devm_iounmap(dev, port->base); port->base = NULL; mvebu_pcie_powerdown(port); continue; } irq_set_chained_handler_and_data(irq, mvebu_pcie_irq_handler, port); } /* * PCIe topology exported by mvebu hw is quite complicated. In * reality has something like N fully independent host bridges * where each host bridge has one PCIe Root Port (which acts as * PCI Bridge device). Each host bridge has its own independent * internal registers, independent access to PCI config space, * independent interrupt lines, independent window and memory * access configuration. But additionally there is some kind of * peer-to-peer support between PCIe devices behind different * host bridges limited just to forwarding of memory and I/O * transactions (forwarding of error messages and config cycles * is not supported). So we could say there are N independent * PCIe Root Complexes. * * For this kind of setup DT should have been structured into * N independent PCIe controllers / host bridges. But instead * structure in past was defined to put PCIe Root Ports of all * host bridges into one bus zero, like in classic multi-port * Root Complex setup with just one host bridge. * * This means that pci-mvebu.c driver provides "virtual" bus 0 * on which registers all PCIe Root Ports (PCI Bridge devices) * specified in DT by their BDF addresses and virtually routes * PCI config access of each PCI bridge device to specific PCIe * host bridge. * * Normally PCI Bridge should choose between Type 0 and Type 1 * config requests based on primary and secondary bus numbers * configured on the bridge itself. But because mvebu PCI Bridge * does not have registers for primary and secondary bus numbers * in its config space, it determinates type of config requests * via its own custom way. * * There are two options how mvebu determinate type of config * request. * * 1. If Secondary Bus Number Enable bit is not set or is not * available (applies for pre-XP PCIe controllers) then Type 0 * is used if target bus number equals Local Bus Number (bits * [15:8] in register 0x1a04) and target device number differs * from Local Device Number (bits [20:16] in register 0x1a04). * Type 1 is used if target bus number differs from Local Bus * Number. And when target bus number equals Local Bus Number * and target device equals Local Device Number then request is * routed to Local PCI Bridge (PCIe Root Port). * * 2. If Secondary Bus Number Enable bit is set (bit 7 in * register 0x1a2c) then mvebu hw determinate type of config * request like compliant PCI Bridge based on primary bus number * which is configured via Local Bus Number (bits [15:8] in * register 0x1a04) and secondary bus number which is configured * via Secondary Bus Number (bits [7:0] in register 0x1a2c). * Local PCI Bridge (PCIe Root Port) is available on primary bus * as device with Local Device Number (bits [20:16] in register * 0x1a04). * * Secondary Bus Number Enable bit is disabled by default and * option 2. is not available on pre-XP PCIe controllers. Hence * this driver always use option 1. * * Basically it means that primary and secondary buses shares * one virtual number configured via Local Bus Number bits and * Local Device Number bits determinates if accessing primary * or secondary bus. Set Local Device Number to 1 and redirect * all writes of PCI Bridge Secondary Bus Number register to * Local Bus Number (bits [15:8] in register 0x1a04). * * So when accessing devices on buses behind secondary bus * number it would work correctly. And also when accessing * device 0 at secondary bus number via config space would be * correctly routed to secondary bus. Due to issues described * in mvebu_pcie_setup_hw(), PCI Bridges at primary bus (zero) * are not accessed directly via PCI config space but rarher * indirectly via kernel emulated PCI bridge driver. */ mvebu_pcie_setup_hw(port); mvebu_pcie_set_local_dev_nr(port, 1); mvebu_pcie_set_local_bus_nr(port, 0); } bridge->sysdata = pcie; bridge->ops = &mvebu_pcie_ops; bridge->child_ops = &mvebu_pcie_child_ops; bridge->align_resource = mvebu_pcie_align_resource; bridge->map_irq = mvebu_pcie_map_irq; return pci_host_probe(bridge); } static void mvebu_pcie_remove(struct platform_device *pdev) { struct mvebu_pcie *pcie = platform_get_drvdata(pdev); struct pci_host_bridge *bridge = pci_host_bridge_from_priv(pcie); u32 cmd, sspl; int i; /* Remove PCI bus with all devices. */ pci_lock_rescan_remove(); pci_stop_root_bus(bridge->bus); pci_remove_root_bus(bridge->bus); pci_unlock_rescan_remove(); for (i = 0; i < pcie->nports; i++) { struct mvebu_pcie_port *port = &pcie->ports[i]; int irq = port->intx_irq; if (!port->base) continue; /* Disable Root Bridge I/O space, memory space and bus mastering. */ cmd = mvebu_readl(port, PCIE_CMD_OFF); cmd &= ~(PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER); mvebu_writel(port, cmd, PCIE_CMD_OFF); /* Mask all interrupt sources. */ mvebu_writel(port, ~PCIE_INT_ALL_MASK, PCIE_INT_UNMASK_OFF); /* Clear all interrupt causes. */ mvebu_writel(port, ~PCIE_INT_ALL_MASK, PCIE_INT_CAUSE_OFF); if (irq > 0) irq_set_chained_handler_and_data(irq, NULL, NULL); /* Remove IRQ domains. */ if (port->intx_irq_domain) irq_domain_remove(port->intx_irq_domain); /* Free config space for emulated root bridge. */ pci_bridge_emul_cleanup(&port->bridge); /* Disable sending Set_Slot_Power_Limit PCIe Message. */ sspl = mvebu_readl(port, PCIE_SSPL_OFF); sspl &= ~(PCIE_SSPL_VALUE_MASK | PCIE_SSPL_SCALE_MASK | PCIE_SSPL_ENABLE); mvebu_writel(port, sspl, PCIE_SSPL_OFF); /* Disable and clear BARs and windows. */ mvebu_pcie_disable_wins(port); /* Delete PCIe IO and MEM windows. */ if (port->iowin.size) mvebu_pcie_del_windows(port, port->iowin.base, port->iowin.size); if (port->memwin.size) mvebu_pcie_del_windows(port, port->memwin.base, port->memwin.size); /* Power down card and disable clocks. Must be the last step. */ mvebu_pcie_powerdown(port); } } static const struct of_device_id mvebu_pcie_of_match_table[] = { { .compatible = "marvell,armada-xp-pcie", }, { .compatible = "marvell,armada-370-pcie", }, { .compatible = "marvell,dove-pcie", }, { .compatible = "marvell,kirkwood-pcie", }, {}, }; static const struct dev_pm_ops mvebu_pcie_pm_ops = { NOIRQ_SYSTEM_SLEEP_PM_OPS(mvebu_pcie_suspend, mvebu_pcie_resume) }; static struct platform_driver mvebu_pcie_driver = { .driver = { .name = "mvebu-pcie", .of_match_table = mvebu_pcie_of_match_table, .pm = &mvebu_pcie_pm_ops, }, .probe = mvebu_pcie_probe, .remove_new = mvebu_pcie_remove, }; module_platform_driver(mvebu_pcie_driver); MODULE_AUTHOR("Thomas Petazzoni "); MODULE_AUTHOR("Pali Rohár "); MODULE_DESCRIPTION("Marvell EBU PCIe controller"); MODULE_LICENSE("GPL v2");