// SPDX-License-Identifier: GPL-2.0-or-later /* * phy-ti-pipe3 - PIPE3 PHY driver. * * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com * Author: Kishon Vijay Abraham I */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #define PLL_STATUS 0x00000004 #define PLL_GO 0x00000008 #define PLL_CONFIGURATION1 0x0000000C #define PLL_CONFIGURATION2 0x00000010 #define PLL_CONFIGURATION3 0x00000014 #define PLL_CONFIGURATION4 0x00000020 #define PLL_REGM_MASK 0x001FFE00 #define PLL_REGM_SHIFT 0x9 #define PLL_REGM_F_MASK 0x0003FFFF #define PLL_REGM_F_SHIFT 0x0 #define PLL_REGN_MASK 0x000001FE #define PLL_REGN_SHIFT 0x1 #define PLL_SELFREQDCO_MASK 0x0000000E #define PLL_SELFREQDCO_SHIFT 0x1 #define PLL_SD_MASK 0x0003FC00 #define PLL_SD_SHIFT 10 #define SET_PLL_GO 0x1 #define PLL_LDOPWDN BIT(15) #define PLL_TICOPWDN BIT(16) #define PLL_LOCK 0x2 #define PLL_IDLE 0x1 #define SATA_PLL_SOFT_RESET BIT(18) #define PIPE3_PHY_PWRCTL_CLK_CMD_MASK GENMASK(21, 14) #define PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT 14 #define PIPE3_PHY_PWRCTL_CLK_FREQ_MASK GENMASK(31, 22) #define PIPE3_PHY_PWRCTL_CLK_FREQ_SHIFT 22 #define PIPE3_PHY_RX_POWERON (0x1 << PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT) #define PIPE3_PHY_TX_POWERON (0x2 << PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT) #define PCIE_PCS_MASK 0xFF0000 #define PCIE_PCS_DELAY_COUNT_SHIFT 0x10 #define PIPE3_PHY_RX_ANA_PROGRAMMABILITY 0x0000000C #define INTERFACE_MASK GENMASK(31, 27) #define INTERFACE_SHIFT 27 #define INTERFACE_MODE_USBSS BIT(4) #define INTERFACE_MODE_SATA_1P5 BIT(3) #define INTERFACE_MODE_SATA_3P0 BIT(2) #define INTERFACE_MODE_PCIE BIT(0) #define LOSD_MASK GENMASK(17, 14) #define LOSD_SHIFT 14 #define MEM_PLLDIV GENMASK(6, 5) #define PIPE3_PHY_RX_TRIM 0x0000001C #define MEM_DLL_TRIM_SEL_MASK GENMASK(31, 30) #define MEM_DLL_TRIM_SHIFT 30 #define PIPE3_PHY_RX_DLL 0x00000024 #define MEM_DLL_PHINT_RATE_MASK GENMASK(31, 30) #define MEM_DLL_PHINT_RATE_SHIFT 30 #define PIPE3_PHY_RX_DIGITAL_MODES 0x00000028 #define MEM_HS_RATE_MASK GENMASK(28, 27) #define MEM_HS_RATE_SHIFT 27 #define MEM_OVRD_HS_RATE BIT(26) #define MEM_OVRD_HS_RATE_SHIFT 26 #define MEM_CDR_FASTLOCK BIT(23) #define MEM_CDR_FASTLOCK_SHIFT 23 #define MEM_CDR_LBW_MASK GENMASK(22, 21) #define MEM_CDR_LBW_SHIFT 21 #define MEM_CDR_STEPCNT_MASK GENMASK(20, 19) #define MEM_CDR_STEPCNT_SHIFT 19 #define MEM_CDR_STL_MASK GENMASK(18, 16) #define MEM_CDR_STL_SHIFT 16 #define MEM_CDR_THR_MASK GENMASK(15, 13) #define MEM_CDR_THR_SHIFT 13 #define MEM_CDR_THR_MODE BIT(12) #define MEM_CDR_THR_MODE_SHIFT 12 #define MEM_CDR_2NDO_SDM_MODE BIT(11) #define MEM_CDR_2NDO_SDM_MODE_SHIFT 11 #define PIPE3_PHY_RX_EQUALIZER 0x00000038 #define MEM_EQLEV_MASK GENMASK(31, 16) #define MEM_EQLEV_SHIFT 16 #define MEM_EQFTC_MASK GENMASK(15, 11) #define MEM_EQFTC_SHIFT 11 #define MEM_EQCTL_MASK GENMASK(10, 7) #define MEM_EQCTL_SHIFT 7 #define MEM_OVRD_EQLEV BIT(2) #define MEM_OVRD_EQLEV_SHIFT 2 #define MEM_OVRD_EQFTC BIT(1) #define MEM_OVRD_EQFTC_SHIFT 1 #define SATA_PHY_RX_IO_AND_A2D_OVERRIDES 0x44 #define MEM_CDR_LOS_SOURCE_MASK GENMASK(10, 9) #define MEM_CDR_LOS_SOURCE_SHIFT 9 /* * This is an Empirical value that works, need to confirm the actual * value required for the PIPE3PHY_PLL_CONFIGURATION2.PLL_IDLE status * to be correctly reflected in the PIPE3PHY_PLL_STATUS register. */ #define PLL_IDLE_TIME 100 /* in milliseconds */ #define PLL_LOCK_TIME 100 /* in milliseconds */ enum pipe3_mode { PIPE3_MODE_PCIE = 1, PIPE3_MODE_SATA, PIPE3_MODE_USBSS }; struct pipe3_dpll_params { u16 m; u8 n; u8 freq:3; u8 sd; u32 mf; }; struct pipe3_dpll_map { unsigned long rate; struct pipe3_dpll_params params; }; struct pipe3_settings { u8 ana_interface; u8 ana_losd; u8 dig_fastlock; u8 dig_lbw; u8 dig_stepcnt; u8 dig_stl; u8 dig_thr; u8 dig_thr_mode; u8 dig_2ndo_sdm_mode; u8 dig_hs_rate; u8 dig_ovrd_hs_rate; u8 dll_trim_sel; u8 dll_phint_rate; u8 eq_lev; u8 eq_ftc; u8 eq_ctl; u8 eq_ovrd_lev; u8 eq_ovrd_ftc; }; struct ti_pipe3 { void __iomem *pll_ctrl_base; void __iomem *phy_rx; void __iomem *phy_tx; struct device *dev; struct device *control_dev; struct clk *wkupclk; struct clk *sys_clk; struct clk *refclk; struct clk *div_clk; struct pipe3_dpll_map *dpll_map; struct regmap *phy_power_syscon; /* ctrl. reg. acces */ struct regmap *pcs_syscon; /* ctrl. reg. acces */ struct regmap *dpll_reset_syscon; /* ctrl. reg. acces */ unsigned int dpll_reset_reg; /* reg. index within syscon */ unsigned int power_reg; /* power reg. index within syscon */ unsigned int pcie_pcs_reg; /* pcs reg. index in syscon */ bool sata_refclk_enabled; enum pipe3_mode mode; struct pipe3_settings settings; }; static struct pipe3_dpll_map dpll_map_usb[] = { {12000000, {1250, 5, 4, 20, 0} }, /* 12 MHz */ {16800000, {3125, 20, 4, 20, 0} }, /* 16.8 MHz */ {19200000, {1172, 8, 4, 20, 65537} }, /* 19.2 MHz */ {20000000, {1000, 7, 4, 10, 0} }, /* 20 MHz */ {26000000, {1250, 12, 4, 20, 0} }, /* 26 MHz */ {38400000, {3125, 47, 4, 20, 92843} }, /* 38.4 MHz */ { }, /* Terminator */ }; static struct pipe3_dpll_map dpll_map_sata[] = { {12000000, {625, 4, 4, 6, 0} }, /* 12 MHz */ {16800000, {625, 6, 4, 7, 0} }, /* 16.8 MHz */ {19200000, {625, 7, 4, 6, 0} }, /* 19.2 MHz */ {20000000, {750, 9, 4, 6, 0} }, /* 20 MHz */ {26000000, {750, 12, 4, 6, 0} }, /* 26 MHz */ {38400000, {625, 15, 4, 6, 0} }, /* 38.4 MHz */ { }, /* Terminator */ }; struct pipe3_data { enum pipe3_mode mode; struct pipe3_dpll_map *dpll_map; struct pipe3_settings settings; }; static struct pipe3_data data_usb = { .mode = PIPE3_MODE_USBSS, .dpll_map = dpll_map_usb, .settings = { /* DRA75x TRM Table 26-17 Preferred USB3_PHY_RX SCP Register Settings */ .ana_interface = INTERFACE_MODE_USBSS, .ana_losd = 0xa, .dig_fastlock = 1, .dig_lbw = 3, .dig_stepcnt = 0, .dig_stl = 0x3, .dig_thr = 1, .dig_thr_mode = 1, .dig_2ndo_sdm_mode = 0, .dig_hs_rate = 0, .dig_ovrd_hs_rate = 1, .dll_trim_sel = 0x2, .dll_phint_rate = 0x3, .eq_lev = 0, .eq_ftc = 0, .eq_ctl = 0x9, .eq_ovrd_lev = 0, .eq_ovrd_ftc = 0, }, }; static struct pipe3_data data_sata = { .mode = PIPE3_MODE_SATA, .dpll_map = dpll_map_sata, .settings = { /* DRA75x TRM Table 26-9 Preferred SATA_PHY_RX SCP Register Settings */ .ana_interface = INTERFACE_MODE_SATA_3P0, .ana_losd = 0x5, .dig_fastlock = 1, .dig_lbw = 3, .dig_stepcnt = 0, .dig_stl = 0x3, .dig_thr = 1, .dig_thr_mode = 1, .dig_2ndo_sdm_mode = 0, .dig_hs_rate = 0, /* Not in TRM preferred settings */ .dig_ovrd_hs_rate = 0, /* Not in TRM preferred settings */ .dll_trim_sel = 0x1, .dll_phint_rate = 0x2, /* for 1.5 GHz DPLL clock */ .eq_lev = 0, .eq_ftc = 0x1f, .eq_ctl = 0, .eq_ovrd_lev = 1, .eq_ovrd_ftc = 1, }, }; static struct pipe3_data data_pcie = { .mode = PIPE3_MODE_PCIE, .settings = { /* DRA75x TRM Table 26-62 Preferred PCIe_PHY_RX SCP Register Settings */ .ana_interface = INTERFACE_MODE_PCIE, .ana_losd = 0xa, .dig_fastlock = 1, .dig_lbw = 3, .dig_stepcnt = 0, .dig_stl = 0x3, .dig_thr = 1, .dig_thr_mode = 1, .dig_2ndo_sdm_mode = 0, .dig_hs_rate = 0, .dig_ovrd_hs_rate = 0, .dll_trim_sel = 0x2, .dll_phint_rate = 0x3, .eq_lev = 0, .eq_ftc = 0x1f, .eq_ctl = 1, .eq_ovrd_lev = 0, .eq_ovrd_ftc = 0, }, }; static inline u32 ti_pipe3_readl(void __iomem *addr, unsigned offset) { return __raw_readl(addr + offset); } static inline void ti_pipe3_writel(void __iomem *addr, unsigned offset, u32 data) { __raw_writel(data, addr + offset); } static struct pipe3_dpll_params *ti_pipe3_get_dpll_params(struct ti_pipe3 *phy) { unsigned long rate; struct pipe3_dpll_map *dpll_map = phy->dpll_map; rate = clk_get_rate(phy->sys_clk); for (; dpll_map->rate; dpll_map++) { if (rate == dpll_map->rate) return &dpll_map->params; } dev_err(phy->dev, "No DPLL configuration for %lu Hz SYS CLK\n", rate); return NULL; } static int ti_pipe3_enable_clocks(struct ti_pipe3 *phy); static void ti_pipe3_disable_clocks(struct ti_pipe3 *phy); static int ti_pipe3_power_off(struct phy *x) { int ret; struct ti_pipe3 *phy = phy_get_drvdata(x); if (!phy->phy_power_syscon) { omap_control_phy_power(phy->control_dev, 0); return 0; } ret = regmap_update_bits(phy->phy_power_syscon, phy->power_reg, PIPE3_PHY_PWRCTL_CLK_CMD_MASK, 0); return ret; } static void ti_pipe3_calibrate(struct ti_pipe3 *phy); static int ti_pipe3_power_on(struct phy *x) { u32 val; u32 mask; unsigned long rate; struct ti_pipe3 *phy = phy_get_drvdata(x); bool rx_pending = false; if (!phy->phy_power_syscon) { omap_control_phy_power(phy->control_dev, 1); return 0; } rate = clk_get_rate(phy->sys_clk); if (!rate) { dev_err(phy->dev, "Invalid clock rate\n"); return -EINVAL; } rate = rate / 1000000; mask = OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_MASK; val = rate << OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_SHIFT; regmap_update_bits(phy->phy_power_syscon, phy->power_reg, mask, val); /* * For PCIe, TX and RX must be powered on simultaneously. * For USB and SATA, TX must be powered on before RX */ mask = OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_MASK; if (phy->mode == PIPE3_MODE_SATA || phy->mode == PIPE3_MODE_USBSS) { val = PIPE3_PHY_TX_POWERON; rx_pending = true; } else { val = PIPE3_PHY_TX_POWERON | PIPE3_PHY_RX_POWERON; } regmap_update_bits(phy->phy_power_syscon, phy->power_reg, mask, val); if (rx_pending) { val = PIPE3_PHY_TX_POWERON | PIPE3_PHY_RX_POWERON; regmap_update_bits(phy->phy_power_syscon, phy->power_reg, mask, val); } if (phy->mode == PIPE3_MODE_PCIE) ti_pipe3_calibrate(phy); return 0; } static int ti_pipe3_dpll_wait_lock(struct ti_pipe3 *phy) { u32 val; unsigned long timeout; timeout = jiffies + msecs_to_jiffies(PLL_LOCK_TIME); do { cpu_relax(); val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_STATUS); if (val & PLL_LOCK) return 0; } while (!time_after(jiffies, timeout)); dev_err(phy->dev, "DPLL failed to lock\n"); return -EBUSY; } static int ti_pipe3_dpll_program(struct ti_pipe3 *phy) { u32 val; struct pipe3_dpll_params *dpll_params; dpll_params = ti_pipe3_get_dpll_params(phy); if (!dpll_params) return -EINVAL; val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION1); val &= ~PLL_REGN_MASK; val |= dpll_params->n << PLL_REGN_SHIFT; ti_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION1, val); val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION2); val &= ~PLL_SELFREQDCO_MASK; val |= dpll_params->freq << PLL_SELFREQDCO_SHIFT; ti_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION2, val); val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION1); val &= ~PLL_REGM_MASK; val |= dpll_params->m << PLL_REGM_SHIFT; ti_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION1, val); val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION4); val &= ~PLL_REGM_F_MASK; val |= dpll_params->mf << PLL_REGM_F_SHIFT; ti_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION4, val); val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION3); val &= ~PLL_SD_MASK; val |= dpll_params->sd << PLL_SD_SHIFT; ti_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION3, val); ti_pipe3_writel(phy->pll_ctrl_base, PLL_GO, SET_PLL_GO); return ti_pipe3_dpll_wait_lock(phy); } static void ti_pipe3_calibrate(struct ti_pipe3 *phy) { u32 val; struct pipe3_settings *s = &phy->settings; val = ti_pipe3_readl(phy->phy_rx, PIPE3_PHY_RX_ANA_PROGRAMMABILITY); val &= ~(INTERFACE_MASK | LOSD_MASK | MEM_PLLDIV); val |= (s->ana_interface << INTERFACE_SHIFT | s->ana_losd << LOSD_SHIFT); ti_pipe3_writel(phy->phy_rx, PIPE3_PHY_RX_ANA_PROGRAMMABILITY, val); val = ti_pipe3_readl(phy->phy_rx, PIPE3_PHY_RX_DIGITAL_MODES); val &= ~(MEM_HS_RATE_MASK | MEM_OVRD_HS_RATE | MEM_CDR_FASTLOCK | MEM_CDR_LBW_MASK | MEM_CDR_STEPCNT_MASK | MEM_CDR_STL_MASK | MEM_CDR_THR_MASK | MEM_CDR_THR_MODE | MEM_CDR_2NDO_SDM_MODE); val |= s->dig_hs_rate << MEM_HS_RATE_SHIFT | s->dig_ovrd_hs_rate << MEM_OVRD_HS_RATE_SHIFT | s->dig_fastlock << MEM_CDR_FASTLOCK_SHIFT | s->dig_lbw << MEM_CDR_LBW_SHIFT | s->dig_stepcnt << MEM_CDR_STEPCNT_SHIFT | s->dig_stl << MEM_CDR_STL_SHIFT | s->dig_thr << MEM_CDR_THR_SHIFT | s->dig_thr_mode << MEM_CDR_THR_MODE_SHIFT | s->dig_2ndo_sdm_mode << MEM_CDR_2NDO_SDM_MODE_SHIFT; ti_pipe3_writel(phy->phy_rx, PIPE3_PHY_RX_DIGITAL_MODES, val); val = ti_pipe3_readl(phy->phy_rx, PIPE3_PHY_RX_TRIM); val &= ~MEM_DLL_TRIM_SEL_MASK; val |= s->dll_trim_sel << MEM_DLL_TRIM_SHIFT; ti_pipe3_writel(phy->phy_rx, PIPE3_PHY_RX_TRIM, val); val = ti_pipe3_readl(phy->phy_rx, PIPE3_PHY_RX_DLL); val &= ~MEM_DLL_PHINT_RATE_MASK; val |= s->dll_phint_rate << MEM_DLL_PHINT_RATE_SHIFT; ti_pipe3_writel(phy->phy_rx, PIPE3_PHY_RX_DLL, val); val = ti_pipe3_readl(phy->phy_rx, PIPE3_PHY_RX_EQUALIZER); val &= ~(MEM_EQLEV_MASK | MEM_EQFTC_MASK | MEM_EQCTL_MASK | MEM_OVRD_EQLEV | MEM_OVRD_EQFTC); val |= s->eq_lev << MEM_EQLEV_SHIFT | s->eq_ftc << MEM_EQFTC_SHIFT | s->eq_ctl << MEM_EQCTL_SHIFT | s->eq_ovrd_lev << MEM_OVRD_EQLEV_SHIFT | s->eq_ovrd_ftc << MEM_OVRD_EQFTC_SHIFT; ti_pipe3_writel(phy->phy_rx, PIPE3_PHY_RX_EQUALIZER, val); if (phy->mode == PIPE3_MODE_SATA) { val = ti_pipe3_readl(phy->phy_rx, SATA_PHY_RX_IO_AND_A2D_OVERRIDES); val &= ~MEM_CDR_LOS_SOURCE_MASK; ti_pipe3_writel(phy->phy_rx, SATA_PHY_RX_IO_AND_A2D_OVERRIDES, val); } } static int ti_pipe3_init(struct phy *x) { struct ti_pipe3 *phy = phy_get_drvdata(x); u32 val; int ret = 0; ti_pipe3_enable_clocks(phy); /* * Set pcie_pcs register to 0x96 for proper functioning of phy * as recommended in AM572x TRM SPRUHZ6, section 18.5.2.2, table * 18-1804. */ if (phy->mode == PIPE3_MODE_PCIE) { if (!phy->pcs_syscon) { omap_control_pcie_pcs(phy->control_dev, 0x96); return 0; } val = 0x96 << OMAP_CTRL_PCIE_PCS_DELAY_COUNT_SHIFT; ret = regmap_update_bits(phy->pcs_syscon, phy->pcie_pcs_reg, PCIE_PCS_MASK, val); return ret; } /* Bring it out of IDLE if it is IDLE */ val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION2); if (val & PLL_IDLE) { val &= ~PLL_IDLE; ti_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION2, val); ret = ti_pipe3_dpll_wait_lock(phy); } /* SATA has issues if re-programmed when locked */ val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_STATUS); if ((val & PLL_LOCK) && phy->mode == PIPE3_MODE_SATA) return ret; /* Program the DPLL */ ret = ti_pipe3_dpll_program(phy); if (ret) { ti_pipe3_disable_clocks(phy); return -EINVAL; } ti_pipe3_calibrate(phy); return ret; } static int ti_pipe3_exit(struct phy *x) { struct ti_pipe3 *phy = phy_get_drvdata(x); u32 val; unsigned long timeout; /* If dpll_reset_syscon is not present we wont power down SATA DPLL * due to Errata i783 */ if (phy->mode == PIPE3_MODE_SATA && !phy->dpll_reset_syscon) return 0; /* PCIe doesn't have internal DPLL */ if (phy->mode != PIPE3_MODE_PCIE) { /* Put DPLL in IDLE mode */ val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION2); val |= PLL_IDLE; ti_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION2, val); /* wait for LDO and Oscillator to power down */ timeout = jiffies + msecs_to_jiffies(PLL_IDLE_TIME); do { cpu_relax(); val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_STATUS); if ((val & PLL_TICOPWDN) && (val & PLL_LDOPWDN)) break; } while (!time_after(jiffies, timeout)); if (!(val & PLL_TICOPWDN) || !(val & PLL_LDOPWDN)) { dev_err(phy->dev, "Failed to power down: PLL_STATUS 0x%x\n", val); return -EBUSY; } } /* i783: SATA needs control bit toggle after PLL unlock */ if (phy->mode == PIPE3_MODE_SATA) { regmap_update_bits(phy->dpll_reset_syscon, phy->dpll_reset_reg, SATA_PLL_SOFT_RESET, SATA_PLL_SOFT_RESET); regmap_update_bits(phy->dpll_reset_syscon, phy->dpll_reset_reg, SATA_PLL_SOFT_RESET, 0); } ti_pipe3_disable_clocks(phy); return 0; } static const struct phy_ops ops = { .init = ti_pipe3_init, .exit = ti_pipe3_exit, .power_on = ti_pipe3_power_on, .power_off = ti_pipe3_power_off, .owner = THIS_MODULE, }; static const struct of_device_id ti_pipe3_id_table[]; static int ti_pipe3_get_clk(struct ti_pipe3 *phy) { struct clk *clk; struct device *dev = phy->dev; phy->refclk = devm_clk_get(dev, "refclk"); if (IS_ERR(phy->refclk)) { dev_err(dev, "unable to get refclk\n"); /* older DTBs have missing refclk in SATA PHY * so don't bail out in case of SATA PHY. */ if (phy->mode != PIPE3_MODE_SATA) return PTR_ERR(phy->refclk); } if (phy->mode != PIPE3_MODE_SATA) { phy->wkupclk = devm_clk_get(dev, "wkupclk"); if (IS_ERR(phy->wkupclk)) { dev_err(dev, "unable to get wkupclk\n"); return PTR_ERR(phy->wkupclk); } } else { phy->wkupclk = ERR_PTR(-ENODEV); } if (phy->mode != PIPE3_MODE_PCIE || phy->phy_power_syscon) { phy->sys_clk = devm_clk_get(dev, "sysclk"); if (IS_ERR(phy->sys_clk)) { dev_err(dev, "unable to get sysclk\n"); return -EINVAL; } } if (phy->mode == PIPE3_MODE_PCIE) { clk = devm_clk_get(dev, "dpll_ref"); if (IS_ERR(clk)) { dev_err(dev, "unable to get dpll ref clk\n"); return PTR_ERR(clk); } clk_set_rate(clk, 1500000000); clk = devm_clk_get(dev, "dpll_ref_m2"); if (IS_ERR(clk)) { dev_err(dev, "unable to get dpll ref m2 clk\n"); return PTR_ERR(clk); } clk_set_rate(clk, 100000000); clk = devm_clk_get(dev, "phy-div"); if (IS_ERR(clk)) { dev_err(dev, "unable to get phy-div clk\n"); return PTR_ERR(clk); } clk_set_rate(clk, 100000000); phy->div_clk = devm_clk_get(dev, "div-clk"); if (IS_ERR(phy->div_clk)) { dev_err(dev, "unable to get div-clk\n"); return PTR_ERR(phy->div_clk); } } else { phy->div_clk = ERR_PTR(-ENODEV); } return 0; } static int ti_pipe3_get_sysctrl(struct ti_pipe3 *phy) { struct device *dev = phy->dev; struct device_node *node = dev->of_node; struct device_node *control_node; struct platform_device *control_pdev; phy->phy_power_syscon = syscon_regmap_lookup_by_phandle(node, "syscon-phy-power"); if (IS_ERR(phy->phy_power_syscon)) { dev_dbg(dev, "can't get syscon-phy-power, using control device\n"); phy->phy_power_syscon = NULL; } else { if (of_property_read_u32_index(node, "syscon-phy-power", 1, &phy->power_reg)) { dev_err(dev, "couldn't get power reg. offset\n"); return -EINVAL; } } if (!phy->phy_power_syscon) { control_node = of_parse_phandle(node, "ctrl-module", 0); if (!control_node) { dev_err(dev, "Failed to get control device phandle\n"); return -EINVAL; } control_pdev = of_find_device_by_node(control_node); of_node_put(control_node); if (!control_pdev) { dev_err(dev, "Failed to get control device\n"); return -EINVAL; } phy->control_dev = &control_pdev->dev; } if (phy->mode == PIPE3_MODE_PCIE) { phy->pcs_syscon = syscon_regmap_lookup_by_phandle(node, "syscon-pcs"); if (IS_ERR(phy->pcs_syscon)) { dev_dbg(dev, "can't get syscon-pcs, using omap control\n"); phy->pcs_syscon = NULL; } else { if (of_property_read_u32_index(node, "syscon-pcs", 1, &phy->pcie_pcs_reg)) { dev_err(dev, "couldn't get pcie pcs reg. offset\n"); return -EINVAL; } } } if (phy->mode == PIPE3_MODE_SATA) { phy->dpll_reset_syscon = syscon_regmap_lookup_by_phandle(node, "syscon-pllreset"); if (IS_ERR(phy->dpll_reset_syscon)) { dev_info(dev, "can't get syscon-pllreset, sata dpll won't idle\n"); phy->dpll_reset_syscon = NULL; } else { if (of_property_read_u32_index(node, "syscon-pllreset", 1, &phy->dpll_reset_reg)) { dev_err(dev, "couldn't get pllreset reg. offset\n"); return -EINVAL; } } } return 0; } static int ti_pipe3_get_tx_rx_base(struct ti_pipe3 *phy) { struct device *dev = phy->dev; struct platform_device *pdev = to_platform_device(dev); phy->phy_rx = devm_platform_ioremap_resource_byname(pdev, "phy_rx"); if (IS_ERR(phy->phy_rx)) return PTR_ERR(phy->phy_rx); phy->phy_tx = devm_platform_ioremap_resource_byname(pdev, "phy_tx"); return PTR_ERR_OR_ZERO(phy->phy_tx); } static int ti_pipe3_get_pll_base(struct ti_pipe3 *phy) { struct device *dev = phy->dev; struct platform_device *pdev = to_platform_device(dev); if (phy->mode == PIPE3_MODE_PCIE) return 0; phy->pll_ctrl_base = devm_platform_ioremap_resource_byname(pdev, "pll_ctrl"); return PTR_ERR_OR_ZERO(phy->pll_ctrl_base); } static int ti_pipe3_probe(struct platform_device *pdev) { struct ti_pipe3 *phy; struct phy *generic_phy; struct phy_provider *phy_provider; struct device *dev = &pdev->dev; int ret; const struct of_device_id *match; struct pipe3_data *data; phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL); if (!phy) return -ENOMEM; match = of_match_device(ti_pipe3_id_table, dev); if (!match) return -EINVAL; data = (struct pipe3_data *)match->data; if (!data) { dev_err(dev, "no driver data\n"); return -EINVAL; } phy->dev = dev; phy->mode = data->mode; phy->dpll_map = data->dpll_map; phy->settings = data->settings; ret = ti_pipe3_get_pll_base(phy); if (ret) return ret; ret = ti_pipe3_get_tx_rx_base(phy); if (ret) return ret; ret = ti_pipe3_get_sysctrl(phy); if (ret) return ret; ret = ti_pipe3_get_clk(phy); if (ret) return ret; platform_set_drvdata(pdev, phy); pm_runtime_enable(dev); /* * Prevent auto-disable of refclk for SATA PHY due to Errata i783 */ if (phy->mode == PIPE3_MODE_SATA) { if (!IS_ERR(phy->refclk)) { clk_prepare_enable(phy->refclk); phy->sata_refclk_enabled = true; } } generic_phy = devm_phy_create(dev, NULL, &ops); if (IS_ERR(generic_phy)) return PTR_ERR(generic_phy); phy_set_drvdata(generic_phy, phy); ti_pipe3_power_off(generic_phy); phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); return PTR_ERR_OR_ZERO(phy_provider); } static int ti_pipe3_remove(struct platform_device *pdev) { struct ti_pipe3 *phy = platform_get_drvdata(pdev); if (phy->mode == PIPE3_MODE_SATA) { clk_disable_unprepare(phy->refclk); phy->sata_refclk_enabled = false; } pm_runtime_disable(&pdev->dev); return 0; } static int ti_pipe3_enable_clocks(struct ti_pipe3 *phy) { int ret = 0; if (!IS_ERR(phy->refclk)) { ret = clk_prepare_enable(phy->refclk); if (ret) { dev_err(phy->dev, "Failed to enable refclk %d\n", ret); return ret; } } if (!IS_ERR(phy->wkupclk)) { ret = clk_prepare_enable(phy->wkupclk); if (ret) { dev_err(phy->dev, "Failed to enable wkupclk %d\n", ret); goto disable_refclk; } } if (!IS_ERR(phy->div_clk)) { ret = clk_prepare_enable(phy->div_clk); if (ret) { dev_err(phy->dev, "Failed to enable div_clk %d\n", ret); goto disable_wkupclk; } } return 0; disable_wkupclk: if (!IS_ERR(phy->wkupclk)) clk_disable_unprepare(phy->wkupclk); disable_refclk: if (!IS_ERR(phy->refclk)) clk_disable_unprepare(phy->refclk); return ret; } static void ti_pipe3_disable_clocks(struct ti_pipe3 *phy) { if (!IS_ERR(phy->wkupclk)) clk_disable_unprepare(phy->wkupclk); if (!IS_ERR(phy->refclk)) clk_disable_unprepare(phy->refclk); if (!IS_ERR(phy->div_clk)) clk_disable_unprepare(phy->div_clk); } static const struct of_device_id ti_pipe3_id_table[] = { { .compatible = "ti,phy-usb3", .data = &data_usb, }, { .compatible = "ti,omap-usb3", .data = &data_usb, }, { .compatible = "ti,phy-pipe3-sata", .data = &data_sata, }, { .compatible = "ti,phy-pipe3-pcie", .data = &data_pcie, }, {} }; MODULE_DEVICE_TABLE(of, ti_pipe3_id_table); static struct platform_driver ti_pipe3_driver = { .probe = ti_pipe3_probe, .remove = ti_pipe3_remove, .driver = { .name = "ti-pipe3", .of_match_table = ti_pipe3_id_table, }, }; module_platform_driver(ti_pipe3_driver); MODULE_ALIAS("platform:ti_pipe3"); MODULE_AUTHOR("Texas Instruments Inc."); MODULE_DESCRIPTION("TI PIPE3 phy driver"); MODULE_LICENSE("GPL v2");