// SPDX-License-Identifier: GPL-2.0 /* * DAMON-based page reclamation * * Author: SeongJae Park */ #define pr_fmt(fmt) "damon-reclaim: " fmt #include #include #include #include #include #ifdef MODULE_PARAM_PREFIX #undef MODULE_PARAM_PREFIX #endif #define MODULE_PARAM_PREFIX "damon_reclaim." /* * Enable or disable DAMON_RECLAIM. * * You can enable DAMON_RCLAIM by setting the value of this parameter as ``Y``. * Setting it as ``N`` disables DAMON_RECLAIM. Note that DAMON_RECLAIM could * do no real monitoring and reclamation due to the watermarks-based activation * condition. Refer to below descriptions for the watermarks parameter for * this. */ static bool enabled __read_mostly; module_param(enabled, bool, 0600); /* * Time threshold for cold memory regions identification in microseconds. * * If a memory region is not accessed for this or longer time, DAMON_RECLAIM * identifies the region as cold, and reclaims. 120 seconds by default. */ static unsigned long min_age __read_mostly = 120000000; module_param(min_age, ulong, 0600); /* * Limit of time for trying the reclamation in milliseconds. * * DAMON_RECLAIM tries to use only up to this time within a time window * (quota_reset_interval_ms) for trying reclamation of cold pages. This can be * used for limiting CPU consumption of DAMON_RECLAIM. If the value is zero, * the limit is disabled. * * 10 ms by default. */ static unsigned long quota_ms __read_mostly = 10; module_param(quota_ms, ulong, 0600); /* * Limit of size of memory for the reclamation in bytes. * * DAMON_RECLAIM charges amount of memory which it tried to reclaim within a * time window (quota_reset_interval_ms) and makes no more than this limit is * tried. This can be used for limiting consumption of CPU and IO. If this * value is zero, the limit is disabled. * * 128 MiB by default. */ static unsigned long quota_sz __read_mostly = 128 * 1024 * 1024; module_param(quota_sz, ulong, 0600); /* * The time/size quota charge reset interval in milliseconds. * * The charge reset interval for the quota of time (quota_ms) and size * (quota_sz). That is, DAMON_RECLAIM does not try reclamation for more than * quota_ms milliseconds or quota_sz bytes within quota_reset_interval_ms * milliseconds. * * 1 second by default. */ static unsigned long quota_reset_interval_ms __read_mostly = 1000; module_param(quota_reset_interval_ms, ulong, 0600); /* * The watermarks check time interval in microseconds. * * Minimal time to wait before checking the watermarks, when DAMON_RECLAIM is * enabled but inactive due to its watermarks rule. 5 seconds by default. */ static unsigned long wmarks_interval __read_mostly = 5000000; module_param(wmarks_interval, ulong, 0600); /* * Free memory rate (per thousand) for the high watermark. * * If free memory of the system in bytes per thousand bytes is higher than * this, DAMON_RECLAIM becomes inactive, so it does nothing but periodically * checks the watermarks. 500 (50%) by default. */ static unsigned long wmarks_high __read_mostly = 500; module_param(wmarks_high, ulong, 0600); /* * Free memory rate (per thousand) for the middle watermark. * * If free memory of the system in bytes per thousand bytes is between this and * the low watermark, DAMON_RECLAIM becomes active, so starts the monitoring * and the reclaiming. 400 (40%) by default. */ static unsigned long wmarks_mid __read_mostly = 400; module_param(wmarks_mid, ulong, 0600); /* * Free memory rate (per thousand) for the low watermark. * * If free memory of the system in bytes per thousand bytes is lower than this, * DAMON_RECLAIM becomes inactive, so it does nothing but periodically checks * the watermarks. In the case, the system falls back to the LRU-based page * granularity reclamation logic. 200 (20%) by default. */ static unsigned long wmarks_low __read_mostly = 200; module_param(wmarks_low, ulong, 0600); /* * Sampling interval for the monitoring in microseconds. * * The sampling interval of DAMON for the cold memory monitoring. Please refer * to the DAMON documentation for more detail. 5 ms by default. */ static unsigned long sample_interval __read_mostly = 5000; module_param(sample_interval, ulong, 0600); /* * Aggregation interval for the monitoring in microseconds. * * The aggregation interval of DAMON for the cold memory monitoring. Please * refer to the DAMON documentation for more detail. 100 ms by default. */ static unsigned long aggr_interval __read_mostly = 100000; module_param(aggr_interval, ulong, 0600); /* * Minimum number of monitoring regions. * * The minimal number of monitoring regions of DAMON for the cold memory * monitoring. This can be used to set lower-bound of the monitoring quality. * But, setting this too high could result in increased monitoring overhead. * Please refer to the DAMON documentation for more detail. 10 by default. */ static unsigned long min_nr_regions __read_mostly = 10; module_param(min_nr_regions, ulong, 0600); /* * Maximum number of monitoring regions. * * The maximum number of monitoring regions of DAMON for the cold memory * monitoring. This can be used to set upper-bound of the monitoring overhead. * However, setting this too low could result in bad monitoring quality. * Please refer to the DAMON documentation for more detail. 1000 by default. */ static unsigned long max_nr_regions __read_mostly = 1000; module_param(max_nr_regions, ulong, 0600); /* * Start of the target memory region in physical address. * * The start physical address of memory region that DAMON_RECLAIM will do work * against. By default, biggest System RAM is used as the region. */ static unsigned long monitor_region_start __read_mostly; module_param(monitor_region_start, ulong, 0600); /* * End of the target memory region in physical address. * * The end physical address of memory region that DAMON_RECLAIM will do work * against. By default, biggest System RAM is used as the region. */ static unsigned long monitor_region_end __read_mostly; module_param(monitor_region_end, ulong, 0600); /* * PID of the DAMON thread * * If DAMON_RECLAIM is enabled, this becomes the PID of the worker thread. * Else, -1. */ static int kdamond_pid __read_mostly = -1; module_param(kdamond_pid, int, 0400); static struct damon_ctx *ctx; static struct damon_target *target; struct damon_reclaim_ram_walk_arg { unsigned long start; unsigned long end; }; static int walk_system_ram(struct resource *res, void *arg) { struct damon_reclaim_ram_walk_arg *a = arg; if (a->end - a->start < res->end - res->start) { a->start = res->start; a->end = res->end; } return 0; } /* * Find biggest 'System RAM' resource and store its start and end address in * @start and @end, respectively. If no System RAM is found, returns false. */ static bool get_monitoring_region(unsigned long *start, unsigned long *end) { struct damon_reclaim_ram_walk_arg arg = {}; walk_system_ram_res(0, ULONG_MAX, &arg, walk_system_ram); if (arg.end <= arg.start) return false; *start = arg.start; *end = arg.end; return true; } static struct damos *damon_reclaim_new_scheme(void) { struct damos_watermarks wmarks = { .metric = DAMOS_WMARK_FREE_MEM_RATE, .interval = wmarks_interval, .high = wmarks_high, .mid = wmarks_mid, .low = wmarks_low, }; struct damos_quota quota = { /* * Do not try reclamation for more than quota_ms milliseconds * or quota_sz bytes within quota_reset_interval_ms. */ .ms = quota_ms, .sz = quota_sz, .reset_interval = quota_reset_interval_ms, /* Within the quota, page out older regions first. */ .weight_sz = 0, .weight_nr_accesses = 0, .weight_age = 1 }; struct damos *scheme = damon_new_scheme( /* Find regions having PAGE_SIZE or larger size */ PAGE_SIZE, ULONG_MAX, /* and not accessed at all */ 0, 0, /* for min_age or more micro-seconds, and */ min_age / aggr_interval, UINT_MAX, /* page out those, as soon as found */ DAMOS_PAGEOUT, /* under the quota. */ "a, /* (De)activate this according to the watermarks. */ &wmarks); return scheme; } static int damon_reclaim_turn(bool on) { struct damon_region *region; struct damos *scheme; int err; if (!on) { err = damon_stop(&ctx, 1); if (!err) kdamond_pid = -1; return err; } err = damon_set_attrs(ctx, sample_interval, aggr_interval, 0, min_nr_regions, max_nr_regions); if (err) return err; if (monitor_region_start > monitor_region_end) return -EINVAL; if (!monitor_region_start && !monitor_region_end && !get_monitoring_region(&monitor_region_start, &monitor_region_end)) return -EINVAL; /* DAMON will free this on its own when finish monitoring */ region = damon_new_region(monitor_region_start, monitor_region_end); if (!region) return -ENOMEM; damon_add_region(region, target); /* Will be freed by 'damon_set_schemes()' below */ scheme = damon_reclaim_new_scheme(); if (!scheme) { err = -ENOMEM; goto free_region_out; } err = damon_set_schemes(ctx, &scheme, 1); if (err) goto free_scheme_out; err = damon_start(&ctx, 1); if (!err) { kdamond_pid = ctx->kdamond->pid; return 0; } free_scheme_out: damon_destroy_scheme(scheme); free_region_out: damon_destroy_region(region, target); return err; } #define ENABLE_CHECK_INTERVAL_MS 1000 static struct delayed_work damon_reclaim_timer; static void damon_reclaim_timer_fn(struct work_struct *work) { static bool last_enabled; bool now_enabled; now_enabled = enabled; if (last_enabled != now_enabled) { if (!damon_reclaim_turn(now_enabled)) last_enabled = now_enabled; else enabled = last_enabled; } schedule_delayed_work(&damon_reclaim_timer, msecs_to_jiffies(ENABLE_CHECK_INTERVAL_MS)); } static DECLARE_DELAYED_WORK(damon_reclaim_timer, damon_reclaim_timer_fn); static int __init damon_reclaim_init(void) { ctx = damon_new_ctx(); if (!ctx) return -ENOMEM; damon_pa_set_primitives(ctx); /* 4242 means nothing but fun */ target = damon_new_target(4242); if (!target) { damon_destroy_ctx(ctx); return -ENOMEM; } damon_add_target(ctx, target); schedule_delayed_work(&damon_reclaim_timer, 0); return 0; } module_init(damon_reclaim_init);