#!/bin/bash # SPDX-License-Identifier: GPL-2.0 # Double quotes to prevent globbing and word splitting is recommended in new # code but we accept it, especially because there were too many before having # address all other issues detected by shellcheck. #shellcheck disable=SC2086 # ShellCheck incorrectly believes that most of the code here is unreachable # because it's invoked by variable name, see how the "tests" array is used #shellcheck disable=SC2317 . "$(dirname "${0}")/mptcp_lib.sh" ret=0 sin="" sinfail="" sout="" cin="" cinfail="" cinsent="" tmpfile="" cout="" err="" capout="" ns1="" ns2="" iptables="iptables" ip6tables="ip6tables" timeout_poll=30 timeout_test=$((timeout_poll * 2 + 1)) capture=false checksum=false ip_mptcp=0 check_invert=0 validate_checksum=false init=0 evts_ns1="" evts_ns2="" evts_ns1_pid=0 evts_ns2_pid=0 last_test_failed=0 last_test_skipped=0 last_test_ignored=1 declare -A all_tests declare -a only_tests_ids declare -a only_tests_names declare -A failed_tests MPTCP_LIB_TEST_FORMAT="%03u %s\n" TEST_NAME="" nr_blank=6 # These var are used only in some tests, make sure they are not already set unset FAILING_LINKS unset test_linkfail unset addr_nr_ns1 unset addr_nr_ns2 unset cestab_ns1 unset cestab_ns2 unset sflags unset fastclose unset fullmesh unset speed # generated using "nfbpf_compile '(ip && (ip[54] & 0xf0) == 0x30) || # (ip6 && (ip6[74] & 0xf0) == 0x30)'" CBPF_MPTCP_SUBOPTION_ADD_ADDR="14, 48 0 0 0, 84 0 0 240, 21 0 3 64, 48 0 0 54, 84 0 0 240, 21 6 7 48, 48 0 0 0, 84 0 0 240, 21 0 4 96, 48 0 0 74, 84 0 0 240, 21 0 1 48, 6 0 0 65535, 6 0 0 0" init_partial() { capout=$(mktemp) mptcp_lib_ns_init ns1 ns2 local netns for netns in "$ns1" "$ns2"; do ip netns exec $netns sysctl -q net.mptcp.pm_type=0 2>/dev/null || true if $checksum; then ip netns exec $netns sysctl -q net.mptcp.checksum_enabled=1 fi done check_invert=0 validate_checksum=$checksum # ns1 ns2 # ns1eth1 ns2eth1 # ns1eth2 ns2eth2 # ns1eth3 ns2eth3 # ns1eth4 ns2eth4 local i for i in $(seq 1 4); do ip link add ns1eth$i netns "$ns1" type veth peer name ns2eth$i netns "$ns2" ip -net "$ns1" addr add 10.0.$i.1/24 dev ns1eth$i ip -net "$ns1" addr add dead:beef:$i::1/64 dev ns1eth$i nodad ip -net "$ns1" link set ns1eth$i up ip -net "$ns2" addr add 10.0.$i.2/24 dev ns2eth$i ip -net "$ns2" addr add dead:beef:$i::2/64 dev ns2eth$i nodad ip -net "$ns2" link set ns2eth$i up # let $ns2 reach any $ns1 address from any interface ip -net "$ns2" route add default via 10.0.$i.1 dev ns2eth$i metric 10$i ip -net "$ns2" route add default via dead:beef:$i::1 dev ns2eth$i metric 10$i done } init_shapers() { local i for i in $(seq 1 4); do tc -n $ns1 qdisc add dev ns1eth$i root netem rate 20mbit delay 1 tc -n $ns2 qdisc add dev ns2eth$i root netem rate 20mbit delay 1 done } cleanup_partial() { rm -f "$capout" mptcp_lib_ns_exit "${ns1}" "${ns2}" } init() { init=1 mptcp_lib_check_mptcp mptcp_lib_check_kallsyms mptcp_lib_check_tools ip ss "${iptables}" "${ip6tables}" sin=$(mktemp) sout=$(mktemp) cin=$(mktemp) cinsent=$(mktemp) cout=$(mktemp) err=$(mktemp) evts_ns1=$(mktemp) evts_ns2=$(mktemp) trap cleanup EXIT make_file "$cin" "client" 1 >/dev/null make_file "$sin" "server" 1 >/dev/null } cleanup() { rm -f "$cin" "$cout" "$sinfail" rm -f "$sin" "$sout" "$cinsent" "$cinfail" rm -f "$tmpfile" rm -rf $evts_ns1 $evts_ns2 rm -f "$err" cleanup_partial } print_check() { printf "%-${nr_blank}s%-36s" " " "${*}" } print_info() { # It can be empty, no need to print anything then [ -z "${1}" ] && return mptcp_lib_print_info " Info: ${*}" } print_ok() { mptcp_lib_pr_ok "${@}" } print_fail() { mptcp_lib_pr_fail "${@}" } print_skip() { mptcp_lib_pr_skip "${@}" } # [ $1: fail msg ] mark_as_skipped() { local msg="${1:-"Feature not supported"}" mptcp_lib_fail_if_expected_feature "${msg}" print_check "${msg}" print_skip last_test_skipped=1 } # $@: condition continue_if() { if ! "${@}"; then mark_as_skipped return 1 fi } skip_test() { if [ "${#only_tests_ids[@]}" -eq 0 ] && [ "${#only_tests_names[@]}" -eq 0 ]; then return 1 fi local i for i in "${only_tests_ids[@]}"; do if [ "$((MPTCP_LIB_TEST_COUNTER+1))" -eq "${i}" ]; then return 1 fi done for i in "${only_tests_names[@]}"; do if [ "${TEST_NAME}" = "${i}" ]; then return 1 fi done return 0 } append_prev_results() { if [ ${last_test_failed} -eq 1 ]; then mptcp_lib_result_fail "${TEST_NAME}" elif [ ${last_test_skipped} -eq 1 ]; then mptcp_lib_result_skip "${TEST_NAME}" elif [ ${last_test_ignored} -ne 1 ]; then mptcp_lib_result_pass "${TEST_NAME}" fi last_test_failed=0 last_test_skipped=0 last_test_ignored=0 } # $1: test name reset() { append_prev_results TEST_NAME="${1}" if skip_test; then MPTCP_LIB_TEST_COUNTER=$((MPTCP_LIB_TEST_COUNTER+1)) last_test_ignored=1 return 1 fi mptcp_lib_print_title "${TEST_NAME}" if [ "${init}" != "1" ]; then init else cleanup_partial fi init_partial return 0 } # $1: test name ; $2: counter to check reset_check_counter() { reset "${1}" || return 1 local counter="${2}" if ! nstat -asz "${counter}" | grep -wq "${counter}"; then mark_as_skipped "counter '${counter}' is not available" return 1 fi } # $1: test name reset_with_cookies() { reset "${1}" || return 1 local netns for netns in "$ns1" "$ns2"; do ip netns exec $netns sysctl -q net.ipv4.tcp_syncookies=2 done } # $1: test name reset_with_add_addr_timeout() { local ip="${2:-4}" local tables reset "${1}" || return 1 tables="${iptables}" if [ $ip -eq 6 ]; then tables="${ip6tables}" fi ip netns exec $ns1 sysctl -q net.mptcp.add_addr_timeout=1 if ! ip netns exec $ns2 $tables -A OUTPUT -p tcp \ -m tcp --tcp-option 30 \ -m bpf --bytecode \ "$CBPF_MPTCP_SUBOPTION_ADD_ADDR" \ -j DROP; then mark_as_skipped "unable to set the 'add addr' rule" return 1 fi } # $1: test name reset_with_checksum() { local ns1_enable=$1 local ns2_enable=$2 reset "checksum test ${1} ${2}" || return 1 ip netns exec $ns1 sysctl -q net.mptcp.checksum_enabled=$ns1_enable ip netns exec $ns2 sysctl -q net.mptcp.checksum_enabled=$ns2_enable validate_checksum=true } reset_with_allow_join_id0() { local ns1_enable=$2 local ns2_enable=$3 reset "${1}" || return 1 ip netns exec $ns1 sysctl -q net.mptcp.allow_join_initial_addr_port=$ns1_enable ip netns exec $ns2 sysctl -q net.mptcp.allow_join_initial_addr_port=$ns2_enable } # Modify TCP payload without corrupting the TCP packet # # This rule inverts a 8-bit word at byte offset 148 for the 2nd TCP ACK packets # carrying enough data. # Once it is done, the TCP Checksum field is updated so the packet is still # considered as valid at the TCP level. # Because the MPTCP checksum, covering the TCP options and data, has not been # updated, the modification will be detected and an MP_FAIL will be emitted: # what we want to validate here without corrupting "random" MPTCP options. # # To avoid having tc producing this pr_info() message for each TCP ACK packets # not carrying enough data: # # tc action pedit offset 162 out of bounds # # Netfilter is used to mark packets with enough data. setup_fail_rules() { check_invert=1 validate_checksum=true local i="$1" local ip="${2:-4}" local tables tables="${iptables}" if [ $ip -eq 6 ]; then tables="${ip6tables}" fi ip netns exec $ns2 $tables \ -t mangle \ -A OUTPUT \ -o ns2eth$i \ -p tcp \ -m length --length 150:9999 \ -m statistic --mode nth --packet 1 --every 99999 \ -j MARK --set-mark 42 || return ${KSFT_SKIP} tc -n $ns2 qdisc add dev ns2eth$i clsact || return ${KSFT_SKIP} tc -n $ns2 filter add dev ns2eth$i egress \ protocol ip prio 1000 \ handle 42 fw \ action pedit munge offset 148 u8 invert \ pipe csum tcp \ index 100 || return ${KSFT_SKIP} } reset_with_fail() { reset_check_counter "${1}" "MPTcpExtInfiniteMapTx" || return 1 shift ip netns exec $ns1 sysctl -q net.mptcp.checksum_enabled=1 ip netns exec $ns2 sysctl -q net.mptcp.checksum_enabled=1 local rc=0 setup_fail_rules "${@}" || rc=$? if [ ${rc} -eq ${KSFT_SKIP} ]; then mark_as_skipped "unable to set the 'fail' rules" return 1 fi } reset_with_events() { reset "${1}" || return 1 mptcp_lib_events "${ns1}" "${evts_ns1}" evts_ns1_pid mptcp_lib_events "${ns2}" "${evts_ns2}" evts_ns2_pid } reset_with_tcp_filter() { reset "${1}" || return 1 shift local ns="${!1}" local src="${2}" local target="${3}" if ! ip netns exec "${ns}" ${iptables} \ -A INPUT \ -s "${src}" \ -p tcp \ -j "${target}"; then mark_as_skipped "unable to set the filter rules" return 1 fi } # $1: err msg fail_test() { ret=${KSFT_FAIL} if [ ${#} -gt 0 ]; then print_fail "${@}" fi # just in case a test is marked twice as failed if [ ${last_test_failed} -eq 0 ]; then failed_tests[${MPTCP_LIB_TEST_COUNTER}]="${TEST_NAME}" dump_stats last_test_failed=1 fi } get_failed_tests_ids() { # sorted local i for i in "${!failed_tests[@]}"; do echo "${i}" done | sort -n } check_transfer() { local in=$1 local out=$2 local what=$3 local bytes=$4 local i a b local line if [ -n "$bytes" ]; then local out_size # when truncating we must check the size explicitly out_size=$(wc -c $out | awk '{print $1}') if [ $out_size -ne $bytes ]; then fail_test "$what output file has wrong size ($out_size, $bytes)" return 1 fi # note: BusyBox's "cmp" command doesn't support --bytes tmpfile=$(mktemp) head --bytes="$bytes" "$in" > "$tmpfile" mv "$tmpfile" "$in" head --bytes="$bytes" "$out" > "$tmpfile" mv "$tmpfile" "$out" tmpfile="" fi cmp -l "$in" "$out" | while read -r i a b; do local sum=$((0${a} + 0${b})) if [ $check_invert -eq 0 ] || [ $sum -ne $((0xff)) ]; then fail_test "$what does not match (in, out):" mptcp_lib_print_file_err "$in" mptcp_lib_print_file_err "$out" return 1 else print_info "$what has inverted byte at ${i}" fi done return 0 } do_ping() { local listener_ns="$1" local connector_ns="$2" local connect_addr="$3" if ! ip netns exec ${connector_ns} ping -q -c 1 $connect_addr >/dev/null; then fail_test "$listener_ns -> $connect_addr connectivity" fi } link_failure() { local ns="$1" if [ -z "$FAILING_LINKS" ]; then l=$((RANDOM%4)) FAILING_LINKS=$((l+1)) fi local l for l in $FAILING_LINKS; do local veth="ns1eth$l" ip -net "$ns" link set "$veth" down done } rm_addr_count() { mptcp_lib_get_counter "${1}" "MPTcpExtRmAddr" } # $1: ns, $2: old rm_addr counter in $ns wait_rm_addr() { local ns="${1}" local old_cnt="${2}" local cnt local i for i in $(seq 10); do cnt=$(rm_addr_count ${ns}) [ "$cnt" = "${old_cnt}" ] || break sleep 0.1 done } rm_sf_count() { mptcp_lib_get_counter "${1}" "MPTcpExtRmSubflow" } # $1: ns, $2: old rm_sf counter in $ns wait_rm_sf() { local ns="${1}" local old_cnt="${2}" local cnt local i for i in $(seq 10); do cnt=$(rm_sf_count ${ns}) [ "$cnt" = "${old_cnt}" ] || break sleep 0.1 done } wait_mpj() { local ns="${1}" local cnt old_cnt old_cnt=$(mptcp_lib_get_counter ${ns} "MPTcpExtMPJoinAckRx") local i for i in $(seq 10); do cnt=$(mptcp_lib_get_counter ${ns} "MPTcpExtMPJoinAckRx") [ "$cnt" = "${old_cnt}" ] || break sleep 0.1 done } kill_events_pids() { mptcp_lib_kill_wait $evts_ns1_pid evts_ns1_pid=0 mptcp_lib_kill_wait $evts_ns2_pid evts_ns2_pid=0 } pm_nl_set_limits() { local ns=$1 local addrs=$2 local subflows=$3 if [ $ip_mptcp -eq 1 ]; then ip -n $ns mptcp limits set add_addr_accepted $addrs subflows $subflows else ip netns exec $ns ./pm_nl_ctl limits $addrs $subflows fi } pm_nl_add_endpoint() { local ns=$1 local addr=$2 local flags _flags local port _port local dev _dev local id _id local nr=2 local p for p in "${@}" do if [ $p = "flags" ]; then eval _flags=\$"$nr" [ -n "$_flags" ]; flags="flags $_flags" fi if [ $p = "dev" ]; then eval _dev=\$"$nr" [ -n "$_dev" ]; dev="dev $_dev" fi if [ $p = "id" ]; then eval _id=\$"$nr" [ -n "$_id" ]; id="id $_id" fi if [ $p = "port" ]; then eval _port=\$"$nr" [ -n "$_port" ]; port="port $_port" fi nr=$((nr + 1)) done if [ $ip_mptcp -eq 1 ]; then ip -n $ns mptcp endpoint add $addr ${_flags//","/" "} $dev $id $port else ip netns exec $ns ./pm_nl_ctl add $addr $flags $dev $id $port fi } pm_nl_del_endpoint() { local ns=$1 local id=$2 local addr=$3 if [ $ip_mptcp -eq 1 ]; then [ $id -ne 0 ] && addr='' ip -n $ns mptcp endpoint delete id $id $addr else ip netns exec $ns ./pm_nl_ctl del $id $addr fi } pm_nl_flush_endpoint() { local ns=$1 if [ $ip_mptcp -eq 1 ]; then ip -n $ns mptcp endpoint flush else ip netns exec $ns ./pm_nl_ctl flush fi } pm_nl_show_endpoints() { local ns=$1 if [ $ip_mptcp -eq 1 ]; then ip -n $ns mptcp endpoint show else ip netns exec $ns ./pm_nl_ctl dump fi } pm_nl_change_endpoint() { local ns=$1 local id=$2 local flags=$3 if [ $ip_mptcp -eq 1 ]; then ip -n $ns mptcp endpoint change id $id ${flags//","/" "} else ip netns exec $ns ./pm_nl_ctl set id $id flags $flags fi } pm_nl_check_endpoint() { local line expected_line local msg="$1" local ns=$2 local addr=$3 local _flags="" local flags local _port local port local dev local _id local id print_check "${msg}" shift 3 while [ -n "$1" ]; do if [ $1 = "flags" ]; then _flags=$2 [ -n "$_flags" ]; flags="flags $_flags" shift elif [ $1 = "dev" ]; then [ -n "$2" ]; dev="dev $1" shift elif [ $1 = "id" ]; then _id=$2 [ -n "$_id" ]; id="id $_id" shift elif [ $1 = "port" ]; then _port=$2 [ -n "$_port" ]; port=" port $_port" shift fi shift done if [ -z "$id" ]; then test_fail "bad test - missing endpoint id" return fi if [ $ip_mptcp -eq 1 ]; then # get line and trim trailing whitespace line=$(ip -n $ns mptcp endpoint show $id) line="${line% }" # the dump order is: address id flags port dev [ -n "$addr" ] && expected_line="$addr" expected_line+=" $id" [ -n "$_flags" ] && expected_line+=" ${_flags//","/" "}" [ -n "$dev" ] && expected_line+=" $dev" [ -n "$port" ] && expected_line+=" $port" else line=$(ip netns exec $ns ./pm_nl_ctl get $_id) # the dump order is: id flags dev address port expected_line="$id" [ -n "$flags" ] && expected_line+=" $flags" [ -n "$dev" ] && expected_line+=" $dev" [ -n "$addr" ] && expected_line+=" $addr" [ -n "$_port" ] && expected_line+=" $_port" fi if [ "$line" = "$expected_line" ]; then print_ok else fail_test "expected '$expected_line' found '$line'" fi } pm_nl_set_endpoint() { local listener_ns="$1" local connector_ns="$2" local connect_addr="$3" local addr_nr_ns1=${addr_nr_ns1:-0} local addr_nr_ns2=${addr_nr_ns2:-0} local sflags=${sflags:-""} local fullmesh=${fullmesh:-""} local flags="subflow" if [ -n "${fullmesh}" ]; then flags="${flags},fullmesh" addr_nr_ns2=${fullmesh} fi # let the mptcp subflow be established in background before # do endpoint manipulation if [ $addr_nr_ns1 != "0" ] || [ $addr_nr_ns2 != "0" ]; then sleep 1 fi if [ $addr_nr_ns1 -gt 0 ]; then local counter=2 local add_nr_ns1=${addr_nr_ns1} local id=10 while [ $add_nr_ns1 -gt 0 ]; do local addr if mptcp_lib_is_v6 "${connect_addr}"; then addr="dead:beef:$counter::1" else addr="10.0.$counter.1" fi pm_nl_add_endpoint $ns1 $addr flags signal counter=$((counter + 1)) add_nr_ns1=$((add_nr_ns1 - 1)) id=$((id + 1)) done elif [ $addr_nr_ns1 -lt 0 ]; then local rm_nr_ns1=$((-addr_nr_ns1)) if [ $rm_nr_ns1 -lt 8 ]; then local counter=0 local line pm_nl_show_endpoints ${listener_ns} | while read -r line; do # shellcheck disable=SC2206 # we do want to split per word local arr=($line) local nr=0 local i for i in "${arr[@]}"; do if [ $i = "id" ]; then if [ $counter -eq $rm_nr_ns1 ]; then break fi id=${arr[$nr+1]} rm_addr=$(rm_addr_count ${connector_ns}) pm_nl_del_endpoint ${listener_ns} $id wait_rm_addr ${connector_ns} ${rm_addr} counter=$((counter + 1)) fi nr=$((nr + 1)) done done elif [ $rm_nr_ns1 -eq 8 ]; then pm_nl_flush_endpoint ${listener_ns} elif [ $rm_nr_ns1 -eq 9 ]; then pm_nl_del_endpoint ${listener_ns} 0 ${connect_addr} fi fi # if newly added endpoints must be deleted, give the background msk # some time to created them [ $addr_nr_ns1 -gt 0 ] && [ $addr_nr_ns2 -lt 0 ] && sleep 1 if [ $addr_nr_ns2 -gt 0 ]; then local add_nr_ns2=${addr_nr_ns2} local counter=3 local id=20 while [ $add_nr_ns2 -gt 0 ]; do local addr if mptcp_lib_is_v6 "${connect_addr}"; then addr="dead:beef:$counter::2" else addr="10.0.$counter.2" fi pm_nl_add_endpoint $ns2 $addr flags $flags counter=$((counter + 1)) add_nr_ns2=$((add_nr_ns2 - 1)) id=$((id + 1)) done elif [ $addr_nr_ns2 -lt 0 ]; then local rm_nr_ns2=$((-addr_nr_ns2)) if [ $rm_nr_ns2 -lt 8 ]; then local counter=0 local line pm_nl_show_endpoints ${connector_ns} | while read -r line; do # shellcheck disable=SC2206 # we do want to split per word local arr=($line) local nr=0 local i for i in "${arr[@]}"; do if [ $i = "id" ]; then if [ $counter -eq $rm_nr_ns2 ]; then break fi local id rm_addr # rm_addr are serialized, allow the previous one to # complete id=${arr[$nr+1]} rm_addr=$(rm_addr_count ${listener_ns}) pm_nl_del_endpoint ${connector_ns} $id wait_rm_addr ${listener_ns} ${rm_addr} counter=$((counter + 1)) fi nr=$((nr + 1)) done done elif [ $rm_nr_ns2 -eq 8 ]; then pm_nl_flush_endpoint ${connector_ns} elif [ $rm_nr_ns2 -eq 9 ]; then local addr if mptcp_lib_is_v6 "${connect_addr}"; then addr="dead:beef:1::2" else addr="10.0.1.2" fi pm_nl_del_endpoint ${connector_ns} 0 $addr fi fi if [ -n "${sflags}" ]; then sleep 1 local netns for netns in "$ns1" "$ns2"; do local line pm_nl_show_endpoints $netns | while read -r line; do # shellcheck disable=SC2206 # we do want to split per word local arr=($line) local nr=0 local id local i for i in "${arr[@]}"; do if [ $i = "id" ]; then id=${arr[$nr+1]} fi nr=$((nr + 1)) done pm_nl_change_endpoint $netns $id $sflags done done fi } chk_cestab_nr() { local ns=$1 local cestab=$2 local count print_check "cestab $cestab" count=$(mptcp_lib_get_counter ${ns} "MPTcpExtMPCurrEstab") if [ -z "$count" ]; then print_skip elif [ "$count" != "$cestab" ]; then fail_test "got $count current establish[s] expected $cestab" else print_ok fi } # $1 namespace 1, $2 namespace 2 check_cestab() { if [ -n "${cestab_ns1}" ]; then chk_cestab_nr ${1} ${cestab_ns1} fi if [ -n "${cestab_ns2}" ]; then chk_cestab_nr ${2} ${cestab_ns2} fi } do_transfer() { local listener_ns="$1" local connector_ns="$2" local cl_proto="$3" local srv_proto="$4" local connect_addr="$5" local port=$((10000 + MPTCP_LIB_TEST_COUNTER - 1)) local cappid local FAILING_LINKS=${FAILING_LINKS:-""} local fastclose=${fastclose:-""} local speed=${speed:-"fast"} :> "$cout" :> "$sout" :> "$capout" if $capture; then local capuser if [ -z $SUDO_USER ] ; then capuser="" else capuser="-Z $SUDO_USER" fi capfile=$(printf "mp_join-%02u-%s.pcap" "$MPTCP_LIB_TEST_COUNTER" "${listener_ns}") echo "Capturing traffic for test $MPTCP_LIB_TEST_COUNTER into $capfile" ip netns exec ${listener_ns} tcpdump -i any -s 65535 -B 32768 $capuser -w $capfile > "$capout" 2>&1 & cappid=$! sleep 1 fi NSTAT_HISTORY=/tmp/${listener_ns}.nstat ip netns exec ${listener_ns} \ nstat -n NSTAT_HISTORY=/tmp/${connector_ns}.nstat ip netns exec ${connector_ns} \ nstat -n local extra_args if [ $speed = "fast" ]; then extra_args="-j" elif [ $speed = "slow" ]; then extra_args="-r 50" elif [ $speed -gt 0 ]; then extra_args="-r ${speed}" fi local extra_cl_args="" local extra_srv_args="" local trunc_size="" if [ -n "${fastclose}" ]; then if [ ${test_linkfail} -le 1 ]; then fail_test "fastclose tests need test_linkfail argument" return 1 fi # disconnect trunc_size=${test_linkfail} local side=${fastclose} if [ ${side} = "client" ]; then extra_cl_args="-f ${test_linkfail}" extra_srv_args="-f -1" elif [ ${side} = "server" ]; then extra_srv_args="-f ${test_linkfail}" extra_cl_args="-f -1" else fail_test "wrong/unknown fastclose spec ${side}" return 1 fi fi extra_srv_args="$extra_args $extra_srv_args" if [ "$test_linkfail" -gt 1 ];then timeout ${timeout_test} \ ip netns exec ${listener_ns} \ ./mptcp_connect -t ${timeout_poll} -l -p $port -s ${srv_proto} \ $extra_srv_args "::" < "$sinfail" > "$sout" & else timeout ${timeout_test} \ ip netns exec ${listener_ns} \ ./mptcp_connect -t ${timeout_poll} -l -p $port -s ${srv_proto} \ $extra_srv_args "::" < "$sin" > "$sout" & fi local spid=$! mptcp_lib_wait_local_port_listen "${listener_ns}" "${port}" extra_cl_args="$extra_args $extra_cl_args" if [ "$test_linkfail" -eq 0 ];then timeout ${timeout_test} \ ip netns exec ${connector_ns} \ ./mptcp_connect -t ${timeout_poll} -p $port -s ${cl_proto} \ $extra_cl_args $connect_addr < "$cin" > "$cout" & elif [ "$test_linkfail" -eq 1 ] || [ "$test_linkfail" -eq 2 ];then ( cat "$cinfail" ; sleep 2; link_failure $listener_ns ; cat "$cinfail" ) | \ tee "$cinsent" | \ timeout ${timeout_test} \ ip netns exec ${connector_ns} \ ./mptcp_connect -t ${timeout_poll} -p $port -s ${cl_proto} \ $extra_cl_args $connect_addr > "$cout" & else tee "$cinsent" < "$cinfail" | \ timeout ${timeout_test} \ ip netns exec ${connector_ns} \ ./mptcp_connect -t ${timeout_poll} -p $port -s ${cl_proto} \ $extra_cl_args $connect_addr > "$cout" & fi local cpid=$! pm_nl_set_endpoint $listener_ns $connector_ns $connect_addr check_cestab $listener_ns $connector_ns wait $cpid local retc=$? wait $spid local rets=$? if $capture; then sleep 1 kill $cappid fi NSTAT_HISTORY=/tmp/${listener_ns}.nstat ip netns exec ${listener_ns} \ nstat | grep Tcp > /tmp/${listener_ns}.out NSTAT_HISTORY=/tmp/${connector_ns}.nstat ip netns exec ${connector_ns} \ nstat | grep Tcp > /tmp/${connector_ns}.out if [ ${rets} -ne 0 ] || [ ${retc} -ne 0 ]; then fail_test "client exit code $retc, server $rets" echo -e "\nnetns ${listener_ns} socket stat for ${port}:" 1>&2 ip netns exec ${listener_ns} ss -Menita 1>&2 -o "sport = :$port" cat /tmp/${listener_ns}.out echo -e "\nnetns ${connector_ns} socket stat for ${port}:" 1>&2 ip netns exec ${connector_ns} ss -Menita 1>&2 -o "dport = :$port" cat /tmp/${connector_ns}.out cat "$capout" return 1 fi if [ "$test_linkfail" -gt 1 ];then check_transfer $sinfail $cout "file received by client" $trunc_size else check_transfer $sin $cout "file received by client" $trunc_size fi retc=$? if [ "$test_linkfail" -eq 0 ];then check_transfer $cin $sout "file received by server" $trunc_size else check_transfer $cinsent $sout "file received by server" $trunc_size fi rets=$? if [ $retc -eq 0 ] && [ $rets -eq 0 ];then cat "$capout" return 0 fi cat "$capout" return 1 } make_file() { local name=$1 local who=$2 local size=$3 mptcp_lib_make_file $name 1024 $size print_info "Test file (size $size KB) for $who" } run_tests() { local listener_ns="$1" local connector_ns="$2" local connect_addr="$3" local size local test_linkfail=${test_linkfail:-0} # The values above 2 are reused to make test files # with the given sizes (KB) if [ "$test_linkfail" -gt 2 ]; then size=$test_linkfail if [ -z "$cinfail" ]; then cinfail=$(mktemp) fi make_file "$cinfail" "client" $size # create the input file for the failure test when # the first failure test run elif [ "$test_linkfail" -ne 0 ] && [ -z "$cinfail" ]; then # the client file must be considerably larger # of the maximum expected cwin value, or the # link utilization will be not predicable size=$((RANDOM%2)) size=$((size+1)) size=$((size*8192)) size=$((size + ( RANDOM % 8192) )) cinfail=$(mktemp) make_file "$cinfail" "client" $size fi if [ "$test_linkfail" -gt 2 ]; then size=$test_linkfail if [ -z "$sinfail" ]; then sinfail=$(mktemp) fi make_file "$sinfail" "server" $size elif [ "$test_linkfail" -eq 2 ] && [ -z "$sinfail" ]; then size=$((RANDOM%16)) size=$((size+1)) size=$((size*2048)) sinfail=$(mktemp) make_file "$sinfail" "server" $size fi do_transfer ${listener_ns} ${connector_ns} MPTCP MPTCP ${connect_addr} } dump_stats() { echo Server ns stats ip netns exec $ns1 nstat -as | grep Tcp echo Client ns stats ip netns exec $ns2 nstat -as | grep Tcp } chk_csum_nr() { local csum_ns1=${1:-0} local csum_ns2=${2:-0} local count local extra_msg="" local allow_multi_errors_ns1=0 local allow_multi_errors_ns2=0 if [[ "${csum_ns1}" = "+"* ]]; then allow_multi_errors_ns1=1 csum_ns1=${csum_ns1:1} fi if [[ "${csum_ns2}" = "+"* ]]; then allow_multi_errors_ns2=1 csum_ns2=${csum_ns2:1} fi print_check "sum" count=$(mptcp_lib_get_counter ${ns1} "MPTcpExtDataCsumErr") if [ "$count" != "$csum_ns1" ]; then extra_msg+=" ns1=$count" fi if [ -z "$count" ]; then print_skip elif { [ "$count" != $csum_ns1 ] && [ $allow_multi_errors_ns1 -eq 0 ]; } || { [ "$count" -lt $csum_ns1 ] && [ $allow_multi_errors_ns1 -eq 1 ]; }; then fail_test "got $count data checksum error[s] expected $csum_ns1" else print_ok fi print_check "csum" count=$(mptcp_lib_get_counter ${ns2} "MPTcpExtDataCsumErr") if [ "$count" != "$csum_ns2" ]; then extra_msg+=" ns2=$count" fi if [ -z "$count" ]; then print_skip elif { [ "$count" != $csum_ns2 ] && [ $allow_multi_errors_ns2 -eq 0 ]; } || { [ "$count" -lt $csum_ns2 ] && [ $allow_multi_errors_ns2 -eq 1 ]; }; then fail_test "got $count data checksum error[s] expected $csum_ns2" else print_ok fi print_info "$extra_msg" } chk_fail_nr() { local fail_tx=$1 local fail_rx=$2 local ns_invert=${3:-""} local count local ns_tx=$ns1 local ns_rx=$ns2 local extra_msg="" local allow_tx_lost=0 local allow_rx_lost=0 if [[ $ns_invert = "invert" ]]; then ns_tx=$ns2 ns_rx=$ns1 extra_msg="invert" fi if [[ "${fail_tx}" = "-"* ]]; then allow_tx_lost=1 fail_tx=${fail_tx:1} fi if [[ "${fail_rx}" = "-"* ]]; then allow_rx_lost=1 fail_rx=${fail_rx:1} fi print_check "ftx" count=$(mptcp_lib_get_counter ${ns_tx} "MPTcpExtMPFailTx") if [ "$count" != "$fail_tx" ]; then extra_msg+=",tx=$count" fi if [ -z "$count" ]; then print_skip elif { [ "$count" != "$fail_tx" ] && [ $allow_tx_lost -eq 0 ]; } || { [ "$count" -gt "$fail_tx" ] && [ $allow_tx_lost -eq 1 ]; }; then fail_test "got $count MP_FAIL[s] TX expected $fail_tx" else print_ok fi print_check "failrx" count=$(mptcp_lib_get_counter ${ns_rx} "MPTcpExtMPFailRx") if [ "$count" != "$fail_rx" ]; then extra_msg+=",rx=$count" fi if [ -z "$count" ]; then print_skip elif { [ "$count" != "$fail_rx" ] && [ $allow_rx_lost -eq 0 ]; } || { [ "$count" -gt "$fail_rx" ] && [ $allow_rx_lost -eq 1 ]; }; then fail_test "got $count MP_FAIL[s] RX expected $fail_rx" else print_ok fi print_info "$extra_msg" } chk_fclose_nr() { local fclose_tx=$1 local fclose_rx=$2 local ns_invert=$3 local count local ns_tx=$ns2 local ns_rx=$ns1 local extra_msg="" if [[ $ns_invert = "invert" ]]; then ns_tx=$ns1 ns_rx=$ns2 extra_msg="invert" fi print_check "ctx" count=$(mptcp_lib_get_counter ${ns_tx} "MPTcpExtMPFastcloseTx") if [ -z "$count" ]; then print_skip elif [ "$count" != "$fclose_tx" ]; then extra_msg+=",tx=$count" fail_test "got $count MP_FASTCLOSE[s] TX expected $fclose_tx" else print_ok fi print_check "fclzrx" count=$(mptcp_lib_get_counter ${ns_rx} "MPTcpExtMPFastcloseRx") if [ -z "$count" ]; then print_skip elif [ "$count" != "$fclose_rx" ]; then extra_msg+=",rx=$count" fail_test "got $count MP_FASTCLOSE[s] RX expected $fclose_rx" else print_ok fi print_info "$extra_msg" } chk_rst_nr() { local rst_tx=$1 local rst_rx=$2 local ns_invert=${3:-""} local count local ns_tx=$ns1 local ns_rx=$ns2 local extra_msg="" if [[ $ns_invert = "invert" ]]; then ns_tx=$ns2 ns_rx=$ns1 extra_msg="invert" fi print_check "rtx" count=$(mptcp_lib_get_counter ${ns_tx} "MPTcpExtMPRstTx") if [ -z "$count" ]; then print_skip # accept more rst than expected except if we don't expect any elif { [ $rst_tx -ne 0 ] && [ $count -lt $rst_tx ]; } || { [ $rst_tx -eq 0 ] && [ $count -ne 0 ]; }; then fail_test "got $count MP_RST[s] TX expected $rst_tx" else print_ok fi print_check "rstrx" count=$(mptcp_lib_get_counter ${ns_rx} "MPTcpExtMPRstRx") if [ -z "$count" ]; then print_skip # accept more rst than expected except if we don't expect any elif { [ $rst_rx -ne 0 ] && [ $count -lt $rst_rx ]; } || { [ $rst_rx -eq 0 ] && [ $count -ne 0 ]; }; then fail_test "got $count MP_RST[s] RX expected $rst_rx" else print_ok fi print_info "$extra_msg" } chk_infi_nr() { local infi_tx=$1 local infi_rx=$2 local count print_check "itx" count=$(mptcp_lib_get_counter ${ns2} "MPTcpExtInfiniteMapTx") if [ -z "$count" ]; then print_skip elif [ "$count" != "$infi_tx" ]; then fail_test "got $count infinite map[s] TX expected $infi_tx" else print_ok fi print_check "infirx" count=$(mptcp_lib_get_counter ${ns1} "MPTcpExtInfiniteMapRx") if [ -z "$count" ]; then print_skip elif [ "$count" != "$infi_rx" ]; then fail_test "got $count infinite map[s] RX expected $infi_rx" else print_ok fi } chk_join_nr() { local syn_nr=$1 local syn_ack_nr=$2 local ack_nr=$3 local csum_ns1=${4:-0} local csum_ns2=${5:-0} local fail_nr=${6:-0} local rst_nr=${7:-0} local infi_nr=${8:-0} local corrupted_pkts=${9:-0} local count local with_cookie if [ "${corrupted_pkts}" -gt 0 ]; then print_info "${corrupted_pkts} corrupted pkts" fi print_check "syn" count=$(mptcp_lib_get_counter ${ns1} "MPTcpExtMPJoinSynRx") if [ -z "$count" ]; then print_skip elif [ "$count" != "$syn_nr" ]; then fail_test "got $count JOIN[s] syn expected $syn_nr" else print_ok fi print_check "synack" with_cookie=$(ip netns exec $ns2 sysctl -n net.ipv4.tcp_syncookies) count=$(mptcp_lib_get_counter ${ns2} "MPTcpExtMPJoinSynAckRx") if [ -z "$count" ]; then print_skip elif [ "$count" != "$syn_ack_nr" ]; then # simult connections exceeding the limit with cookie enabled could go up to # synack validation as the conn limit can be enforced reliably only after # the subflow creation if [ "$with_cookie" = 2 ] && [ "$count" -gt "$syn_ack_nr" ] && [ "$count" -le "$syn_nr" ]; then print_ok else fail_test "got $count JOIN[s] synack expected $syn_ack_nr" fi else print_ok fi print_check "ack" count=$(mptcp_lib_get_counter ${ns1} "MPTcpExtMPJoinAckRx") if [ -z "$count" ]; then print_skip elif [ "$count" != "$ack_nr" ]; then fail_test "got $count JOIN[s] ack expected $ack_nr" else print_ok fi if $validate_checksum; then chk_csum_nr $csum_ns1 $csum_ns2 chk_fail_nr $fail_nr $fail_nr chk_rst_nr $rst_nr $rst_nr chk_infi_nr $infi_nr $infi_nr fi } # a negative value for 'stale_max' means no upper bound: # for bidirectional transfer, if one peer sleep for a while # - as these tests do - we can have a quite high number of # stale/recover conversions, proportional to # sleep duration/ MPTCP-level RTX interval. chk_stale_nr() { local ns=$1 local stale_min=$2 local stale_max=$3 local stale_delta=$4 local dump_stats local stale_nr local recover_nr print_check "stale" stale_nr=$(mptcp_lib_get_counter ${ns} "MPTcpExtSubflowStale") recover_nr=$(mptcp_lib_get_counter ${ns} "MPTcpExtSubflowRecover") if [ -z "$stale_nr" ] || [ -z "$recover_nr" ]; then print_skip elif [ $stale_nr -lt $stale_min ] || { [ $stale_max -gt 0 ] && [ $stale_nr -gt $stale_max ]; } || [ $((stale_nr - recover_nr)) -ne $stale_delta ]; then fail_test "got $stale_nr stale[s] $recover_nr recover[s], " \ " expected stale in range [$stale_min..$stale_max]," \ " stale-recover delta $stale_delta" dump_stats=1 else print_ok fi if [ "${dump_stats}" = 1 ]; then echo $ns stats ip netns exec $ns ip -s link show ip netns exec $ns nstat -as | grep MPTcp fi } chk_add_nr() { local add_nr=$1 local echo_nr=$2 local port_nr=${3:-0} local syn_nr=${4:-$port_nr} local syn_ack_nr=${5:-$port_nr} local ack_nr=${6:-$port_nr} local mis_syn_nr=${7:-0} local mis_ack_nr=${8:-0} local count local timeout timeout=$(ip netns exec $ns1 sysctl -n net.mptcp.add_addr_timeout) print_check "add" count=$(mptcp_lib_get_counter ${ns2} "MPTcpExtAddAddr") if [ -z "$count" ]; then print_skip # if the test configured a short timeout tolerate greater then expected # add addrs options, due to retransmissions elif [ "$count" != "$add_nr" ] && { [ "$timeout" -gt 1 ] || [ "$count" -lt "$add_nr" ]; }; then fail_test "got $count ADD_ADDR[s] expected $add_nr" else print_ok fi print_check "echo" count=$(mptcp_lib_get_counter ${ns1} "MPTcpExtEchoAdd") if [ -z "$count" ]; then print_skip elif [ "$count" != "$echo_nr" ]; then fail_test "got $count ADD_ADDR echo[s] expected $echo_nr" else print_ok fi if [ $port_nr -gt 0 ]; then print_check "pt" count=$(mptcp_lib_get_counter ${ns2} "MPTcpExtPortAdd") if [ -z "$count" ]; then print_skip elif [ "$count" != "$port_nr" ]; then fail_test "got $count ADD_ADDR[s] with a port-number expected $port_nr" else print_ok fi print_check "syn" count=$(mptcp_lib_get_counter ${ns1} "MPTcpExtMPJoinPortSynRx") if [ -z "$count" ]; then print_skip elif [ "$count" != "$syn_nr" ]; then fail_test "got $count JOIN[s] syn with a different \ port-number expected $syn_nr" else print_ok fi print_check "synack" count=$(mptcp_lib_get_counter ${ns2} "MPTcpExtMPJoinPortSynAckRx") if [ -z "$count" ]; then print_skip elif [ "$count" != "$syn_ack_nr" ]; then fail_test "got $count JOIN[s] synack with a different \ port-number expected $syn_ack_nr" else print_ok fi print_check "ack" count=$(mptcp_lib_get_counter ${ns1} "MPTcpExtMPJoinPortAckRx") if [ -z "$count" ]; then print_skip elif [ "$count" != "$ack_nr" ]; then fail_test "got $count JOIN[s] ack with a different \ port-number expected $ack_nr" else print_ok fi print_check "syn" count=$(mptcp_lib_get_counter ${ns1} "MPTcpExtMismatchPortSynRx") if [ -z "$count" ]; then print_skip elif [ "$count" != "$mis_syn_nr" ]; then fail_test "got $count JOIN[s] syn with a mismatched \ port-number expected $mis_syn_nr" else print_ok fi print_check "ack" count=$(mptcp_lib_get_counter ${ns1} "MPTcpExtMismatchPortAckRx") if [ -z "$count" ]; then print_skip elif [ "$count" != "$mis_ack_nr" ]; then fail_test "got $count JOIN[s] ack with a mismatched \ port-number expected $mis_ack_nr" else print_ok fi fi } chk_add_tx_nr() { local add_tx_nr=$1 local echo_tx_nr=$2 local timeout local count timeout=$(ip netns exec $ns1 sysctl -n net.mptcp.add_addr_timeout) print_check "add TX" count=$(mptcp_lib_get_counter ${ns1} "MPTcpExtAddAddrTx") if [ -z "$count" ]; then print_skip # if the test configured a short timeout tolerate greater then expected # add addrs options, due to retransmissions elif [ "$count" != "$add_tx_nr" ] && { [ "$timeout" -gt 1 ] || [ "$count" -lt "$add_tx_nr" ]; }; then fail_test "got $count ADD_ADDR[s] TX, expected $add_tx_nr" else print_ok fi print_check "echo TX" count=$(mptcp_lib_get_counter ${ns2} "MPTcpExtEchoAddTx") if [ -z "$count" ]; then print_skip elif [ "$count" != "$echo_tx_nr" ]; then fail_test "got $count ADD_ADDR echo[s] TX, expected $echo_tx_nr" else print_ok fi } chk_rm_nr() { local rm_addr_nr=$1 local rm_subflow_nr=$2 local invert local simult local count local addr_ns=$ns1 local subflow_ns=$ns2 local extra_msg="" shift 2 while [ -n "$1" ]; do [ "$1" = "invert" ] && invert=true [ "$1" = "simult" ] && simult=true shift done if [ -z $invert ]; then addr_ns=$ns1 subflow_ns=$ns2 elif [ $invert = "true" ]; then addr_ns=$ns2 subflow_ns=$ns1 extra_msg="invert" fi print_check "rm" count=$(mptcp_lib_get_counter ${addr_ns} "MPTcpExtRmAddr") if [ -z "$count" ]; then print_skip elif [ "$count" != "$rm_addr_nr" ]; then fail_test "got $count RM_ADDR[s] expected $rm_addr_nr" else print_ok fi print_check "rmsf" count=$(mptcp_lib_get_counter ${subflow_ns} "MPTcpExtRmSubflow") if [ -z "$count" ]; then print_skip elif [ -n "$simult" ]; then local cnt suffix cnt=$(mptcp_lib_get_counter ${addr_ns} "MPTcpExtRmSubflow") # in case of simult flush, the subflow removal count on each side is # unreliable count=$((count + cnt)) if [ "$count" != "$rm_subflow_nr" ]; then suffix="$count in [$rm_subflow_nr:$((rm_subflow_nr*2))]" extra_msg+=" simult" fi if [ $count -ge "$rm_subflow_nr" ] && \ [ "$count" -le "$((rm_subflow_nr *2 ))" ]; then print_ok "$suffix" else fail_test "got $count RM_SUBFLOW[s] expected in range [$rm_subflow_nr:$((rm_subflow_nr*2))]" fi elif [ "$count" != "$rm_subflow_nr" ]; then fail_test "got $count RM_SUBFLOW[s] expected $rm_subflow_nr" else print_ok fi print_info "$extra_msg" } chk_rm_tx_nr() { local rm_addr_tx_nr=$1 print_check "rm TX" count=$(mptcp_lib_get_counter ${ns2} "MPTcpExtRmAddrTx") if [ -z "$count" ]; then print_skip elif [ "$count" != "$rm_addr_tx_nr" ]; then fail_test "got $count RM_ADDR[s] expected $rm_addr_tx_nr" else print_ok fi } chk_prio_nr() { local mp_prio_nr_tx=$1 local mp_prio_nr_rx=$2 local count print_check "ptx" count=$(mptcp_lib_get_counter ${ns1} "MPTcpExtMPPrioTx") if [ -z "$count" ]; then print_skip elif [ "$count" != "$mp_prio_nr_tx" ]; then fail_test "got $count MP_PRIO[s] TX expected $mp_prio_nr_tx" else print_ok fi print_check "prx" count=$(mptcp_lib_get_counter ${ns1} "MPTcpExtMPPrioRx") if [ -z "$count" ]; then print_skip elif [ "$count" != "$mp_prio_nr_rx" ]; then fail_test "got $count MP_PRIO[s] RX expected $mp_prio_nr_rx" else print_ok fi } chk_subflow_nr() { local msg="$1" local subflow_nr=$2 local cnt1 local cnt2 local dump_stats print_check "${msg}" cnt1=$(ss -N $ns1 -tOni | grep -c token) cnt2=$(ss -N $ns2 -tOni | grep -c token) if [ "$cnt1" != "$subflow_nr" ] || [ "$cnt2" != "$subflow_nr" ]; then fail_test "got $cnt1:$cnt2 subflows expected $subflow_nr" dump_stats=1 else print_ok fi if [ "${dump_stats}" = 1 ]; then ss -N $ns1 -tOni ss -N $ns1 -tOni | grep token ip -n $ns1 mptcp endpoint fi } chk_mptcp_info() { local info1=$1 local exp1=$2 local info2=$3 local exp2=$4 local cnt1 local cnt2 local dump_stats print_check "mptcp_info ${info1:0:15}=$exp1:$exp2" cnt1=$(ss -N $ns1 -inmHM | mptcp_lib_get_info_value "$info1" "$info1") cnt2=$(ss -N $ns2 -inmHM | mptcp_lib_get_info_value "$info2" "$info2") # 'ss' only display active connections and counters that are not 0. [ -z "$cnt1" ] && cnt1=0 [ -z "$cnt2" ] && cnt2=0 if [ "$cnt1" != "$exp1" ] || [ "$cnt2" != "$exp2" ]; then fail_test "got $cnt1:$cnt2 $info1:$info2 expected $exp1:$exp2" dump_stats=1 else print_ok fi if [ "$dump_stats" = 1 ]; then ss -N $ns1 -inmHM ss -N $ns2 -inmHM fi } # $1: subflows in ns1 ; $2: subflows in ns2 # number of all subflows, including the initial subflow. chk_subflows_total() { local cnt1 local cnt2 local info="subflows_total" local dump_stats # if subflows_total counter is supported, use it: if [ -n "$(ss -N $ns1 -inmHM | mptcp_lib_get_info_value $info $info)" ]; then chk_mptcp_info $info $1 $info $2 return fi print_check "$info $1:$2" # if not, count the TCP connections that are in fact MPTCP subflows cnt1=$(ss -N $ns1 -ti state established state syn-sent state syn-recv | grep -c tcp-ulp-mptcp) cnt2=$(ss -N $ns2 -ti state established state syn-sent state syn-recv | grep -c tcp-ulp-mptcp) if [ "$1" != "$cnt1" ] || [ "$2" != "$cnt2" ]; then fail_test "got subflows $cnt1:$cnt2 expected $1:$2" dump_stats=1 else print_ok fi if [ "$dump_stats" = 1 ]; then ss -N $ns1 -ti ss -N $ns2 -ti fi } chk_link_usage() { local ns=$1 local link=$2 local out=$3 local expected_rate=$4 local tx_link tx_total tx_link=$(ip netns exec $ns cat /sys/class/net/$link/statistics/tx_bytes) tx_total=$(stat --format=%s $out) local tx_rate=$((tx_link * 100 / tx_total)) local tolerance=5 print_check "link usage" if [ $tx_rate -lt $((expected_rate - tolerance)) ] || \ [ $tx_rate -gt $((expected_rate + tolerance)) ]; then fail_test "got $tx_rate% usage, expected $expected_rate%" else print_ok fi } wait_attempt_fail() { local timeout_ms=$((timeout_poll * 1000)) local time=0 local ns=$1 while [ $time -lt $timeout_ms ]; do local cnt cnt=$(mptcp_lib_get_counter ${ns} "TcpAttemptFails") [ "$cnt" = 1 ] && return 1 time=$((time + 100)) sleep 0.1 done return 1 } set_userspace_pm() { local ns=$1 ip netns exec $ns sysctl -q net.mptcp.pm_type=1 } subflows_tests() { if reset "no JOIN"; then run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 0 0 0 fi # subflow limited by client if reset "single subflow, limited by client"; then pm_nl_set_limits $ns1 0 0 pm_nl_set_limits $ns2 0 0 pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 0 0 0 fi # subflow limited by server if reset "single subflow, limited by server"; then pm_nl_set_limits $ns1 0 0 pm_nl_set_limits $ns2 0 1 pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 1 1 0 fi # subflow if reset "single subflow"; then pm_nl_set_limits $ns1 0 1 pm_nl_set_limits $ns2 0 1 pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 1 1 1 fi # multiple subflows if reset "multiple subflows"; then pm_nl_set_limits $ns1 0 2 pm_nl_set_limits $ns2 0 2 pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 2 2 2 fi # multiple subflows limited by server if reset "multiple subflows, limited by server"; then pm_nl_set_limits $ns1 0 1 pm_nl_set_limits $ns2 0 2 pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 2 2 1 fi # single subflow, dev if reset "single subflow, dev"; then pm_nl_set_limits $ns1 0 1 pm_nl_set_limits $ns2 0 1 pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow dev ns2eth3 run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 1 1 1 fi } subflows_error_tests() { # If a single subflow is configured, and matches the MPC src # address, no additional subflow should be created if reset "no MPC reuse with single endpoint"; then pm_nl_set_limits $ns1 0 1 pm_nl_set_limits $ns2 0 1 pm_nl_add_endpoint $ns2 10.0.1.2 flags subflow speed=slow \ run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 0 0 0 fi # multiple subflows, with subflow creation error if reset_with_tcp_filter "multi subflows, with failing subflow" ns1 10.0.3.2 REJECT && continue_if mptcp_lib_kallsyms_has "mptcp_pm_subflow_check_next$"; then pm_nl_set_limits $ns1 0 2 pm_nl_set_limits $ns2 0 2 pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow speed=slow \ run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 1 1 1 fi # multiple subflows, with subflow timeout on MPJ if reset_with_tcp_filter "multi subflows, with subflow timeout" ns1 10.0.3.2 DROP && continue_if mptcp_lib_kallsyms_has "mptcp_pm_subflow_check_next$"; then pm_nl_set_limits $ns1 0 2 pm_nl_set_limits $ns2 0 2 pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow speed=slow \ run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 1 1 1 fi # multiple subflows, check that the endpoint corresponding to # closed subflow (due to reset) is not reused if additional # subflows are added later if reset_with_tcp_filter "multi subflows, fair usage on close" ns1 10.0.3.2 REJECT && continue_if mptcp_lib_kallsyms_has "mptcp_pm_subflow_check_next$"; then pm_nl_set_limits $ns1 0 1 pm_nl_set_limits $ns2 0 1 pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow speed=slow \ run_tests $ns1 $ns2 10.0.1.1 & # mpj subflow will be in TW after the reset wait_attempt_fail $ns2 pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow wait # additional subflow could be created only if the PM select # the later endpoint, skipping the already used one chk_join_nr 1 1 1 fi } signal_address_tests() { # add_address, unused if reset "unused signal address"; then pm_nl_add_endpoint $ns1 10.0.2.1 flags signal run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 0 0 0 chk_add_tx_nr 1 1 chk_add_nr 1 1 fi # accept and use add_addr if reset "signal address"; then pm_nl_set_limits $ns1 0 1 pm_nl_set_limits $ns2 1 1 pm_nl_add_endpoint $ns1 10.0.2.1 flags signal run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 1 1 1 chk_add_nr 1 1 fi # accept and use add_addr with an additional subflow # note: signal address in server ns and local addresses in client ns must # belong to different subnets or one of the listed local address could be # used for 'add_addr' subflow if reset "subflow and signal"; then pm_nl_add_endpoint $ns1 10.0.2.1 flags signal pm_nl_set_limits $ns1 0 2 pm_nl_set_limits $ns2 1 2 pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 2 2 2 chk_add_nr 1 1 fi # accept and use add_addr with additional subflows if reset "multiple subflows and signal"; then pm_nl_set_limits $ns1 0 3 pm_nl_add_endpoint $ns1 10.0.2.1 flags signal pm_nl_set_limits $ns2 1 3 pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow pm_nl_add_endpoint $ns2 10.0.4.2 flags subflow run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 3 3 3 chk_add_nr 1 1 fi # signal addresses if reset "signal addresses"; then pm_nl_set_limits $ns1 3 3 pm_nl_add_endpoint $ns1 10.0.2.1 flags signal pm_nl_add_endpoint $ns1 10.0.3.1 flags signal pm_nl_add_endpoint $ns1 10.0.4.1 flags signal pm_nl_set_limits $ns2 3 3 run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 3 3 3 chk_add_nr 3 3 fi # signal invalid addresses if reset "signal invalid addresses"; then pm_nl_set_limits $ns1 3 3 pm_nl_add_endpoint $ns1 10.0.12.1 flags signal pm_nl_add_endpoint $ns1 10.0.3.1 flags signal pm_nl_add_endpoint $ns1 10.0.14.1 flags signal pm_nl_set_limits $ns2 3 3 run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 1 1 1 chk_add_nr 3 3 fi # signal addresses race test if reset "signal addresses race test"; then pm_nl_set_limits $ns1 4 4 pm_nl_set_limits $ns2 4 4 pm_nl_add_endpoint $ns1 10.0.1.1 flags signal pm_nl_add_endpoint $ns1 10.0.2.1 flags signal pm_nl_add_endpoint $ns1 10.0.3.1 flags signal pm_nl_add_endpoint $ns1 10.0.4.1 flags signal pm_nl_add_endpoint $ns2 10.0.1.2 flags signal pm_nl_add_endpoint $ns2 10.0.2.2 flags signal pm_nl_add_endpoint $ns2 10.0.3.2 flags signal pm_nl_add_endpoint $ns2 10.0.4.2 flags signal # the peer could possibly miss some addr notification, allow retransmission ip netns exec $ns1 sysctl -q net.mptcp.add_addr_timeout=1 speed=slow \ run_tests $ns1 $ns2 10.0.1.1 # It is not directly linked to the commit introducing this # symbol but for the parent one which is linked anyway. if ! mptcp_lib_kallsyms_has "mptcp_pm_subflow_check_next$"; then chk_join_nr 3 3 2 chk_add_nr 4 4 else chk_join_nr 3 3 3 # the server will not signal the address terminating # the MPC subflow chk_add_nr 3 3 fi fi } link_failure_tests() { # accept and use add_addr with additional subflows and link loss if reset "multiple flows, signal, link failure"; then # without any b/w limit each veth could spool the packets and get # them acked at xmit time, so that the corresponding subflow will # have almost always no outstanding pkts, the scheduler will pick # always the first subflow and we will have hard time testing # active backup and link switch-over. # Let's set some arbitrary (low) virtual link limits. init_shapers pm_nl_set_limits $ns1 0 3 pm_nl_add_endpoint $ns1 10.0.2.1 dev ns1eth2 flags signal pm_nl_set_limits $ns2 1 3 pm_nl_add_endpoint $ns2 10.0.3.2 dev ns2eth3 flags subflow pm_nl_add_endpoint $ns2 10.0.4.2 dev ns2eth4 flags subflow test_linkfail=1 \ run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 3 3 3 chk_add_nr 1 1 chk_stale_nr $ns2 1 5 1 fi # accept and use add_addr with additional subflows and link loss # for bidirectional transfer if reset "multi flows, signal, bidi, link fail"; then init_shapers pm_nl_set_limits $ns1 0 3 pm_nl_add_endpoint $ns1 10.0.2.1 dev ns1eth2 flags signal pm_nl_set_limits $ns2 1 3 pm_nl_add_endpoint $ns2 10.0.3.2 dev ns2eth3 flags subflow pm_nl_add_endpoint $ns2 10.0.4.2 dev ns2eth4 flags subflow test_linkfail=2 \ run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 3 3 3 chk_add_nr 1 1 chk_stale_nr $ns2 1 -1 1 fi # 2 subflows plus 1 backup subflow with a lossy link, backup # will never be used if reset "backup subflow unused, link failure"; then init_shapers pm_nl_set_limits $ns1 0 2 pm_nl_add_endpoint $ns1 10.0.2.1 dev ns1eth2 flags signal pm_nl_set_limits $ns2 1 2 pm_nl_add_endpoint $ns2 10.0.3.2 dev ns2eth3 flags subflow,backup FAILING_LINKS="1" test_linkfail=1 \ run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 2 2 2 chk_add_nr 1 1 chk_link_usage $ns2 ns2eth3 $cinsent 0 fi # 2 lossy links after half transfer, backup will get half of # the traffic if reset "backup flow used, multi links fail"; then init_shapers pm_nl_set_limits $ns1 0 2 pm_nl_add_endpoint $ns1 10.0.2.1 dev ns1eth2 flags signal pm_nl_set_limits $ns2 1 2 pm_nl_add_endpoint $ns2 10.0.3.2 dev ns2eth3 flags subflow,backup FAILING_LINKS="1 2" test_linkfail=1 \ run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 2 2 2 chk_add_nr 1 1 chk_stale_nr $ns2 2 4 2 chk_link_usage $ns2 ns2eth3 $cinsent 50 fi # use a backup subflow with the first subflow on a lossy link # for bidirectional transfer if reset "backup flow used, bidi, link failure"; then init_shapers pm_nl_set_limits $ns1 0 2 pm_nl_add_endpoint $ns1 10.0.2.1 dev ns1eth2 flags signal pm_nl_set_limits $ns2 1 3 pm_nl_add_endpoint $ns2 10.0.3.2 dev ns2eth3 flags subflow,backup FAILING_LINKS="1 2" test_linkfail=2 \ run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 2 2 2 chk_add_nr 1 1 chk_stale_nr $ns2 1 -1 2 chk_link_usage $ns2 ns2eth3 $cinsent 50 fi } add_addr_timeout_tests() { # add_addr timeout if reset_with_add_addr_timeout "signal address, ADD_ADDR timeout"; then pm_nl_set_limits $ns1 0 1 pm_nl_set_limits $ns2 1 1 pm_nl_add_endpoint $ns1 10.0.2.1 flags signal speed=slow \ run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 1 1 1 chk_add_tx_nr 4 4 chk_add_nr 4 0 fi # add_addr timeout IPv6 if reset_with_add_addr_timeout "signal address, ADD_ADDR6 timeout" 6; then pm_nl_set_limits $ns1 0 1 pm_nl_set_limits $ns2 1 1 pm_nl_add_endpoint $ns1 dead:beef:2::1 flags signal speed=slow \ run_tests $ns1 $ns2 dead:beef:1::1 chk_join_nr 1 1 1 chk_add_nr 4 0 fi # signal addresses timeout if reset_with_add_addr_timeout "signal addresses, ADD_ADDR timeout"; then pm_nl_set_limits $ns1 2 2 pm_nl_add_endpoint $ns1 10.0.2.1 flags signal pm_nl_add_endpoint $ns1 10.0.3.1 flags signal pm_nl_set_limits $ns2 2 2 speed=10 \ run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 2 2 2 chk_add_nr 8 0 fi # signal invalid addresses timeout if reset_with_add_addr_timeout "invalid address, ADD_ADDR timeout"; then pm_nl_set_limits $ns1 2 2 pm_nl_add_endpoint $ns1 10.0.12.1 flags signal pm_nl_add_endpoint $ns1 10.0.3.1 flags signal pm_nl_set_limits $ns2 2 2 speed=10 \ run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 1 1 1 chk_add_nr 8 0 fi } remove_tests() { # single subflow, remove if reset "remove single subflow"; then pm_nl_set_limits $ns1 0 1 pm_nl_set_limits $ns2 0 1 pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow addr_nr_ns2=-1 speed=slow \ run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 1 1 1 chk_rm_tx_nr 1 chk_rm_nr 1 1 chk_rst_nr 0 0 fi # multiple subflows, remove if reset "remove multiple subflows"; then pm_nl_set_limits $ns1 0 2 pm_nl_set_limits $ns2 0 2 pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow addr_nr_ns2=-2 speed=slow \ run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 2 2 2 chk_rm_nr 2 2 chk_rst_nr 0 0 fi # single address, remove if reset "remove single address"; then pm_nl_set_limits $ns1 0 1 pm_nl_add_endpoint $ns1 10.0.2.1 flags signal pm_nl_set_limits $ns2 1 1 addr_nr_ns1=-1 speed=slow \ run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 1 1 1 chk_add_nr 1 1 chk_rm_nr 1 1 invert chk_rst_nr 0 0 fi # subflow and signal, remove if reset "remove subflow and signal"; then pm_nl_set_limits $ns1 0 2 pm_nl_add_endpoint $ns1 10.0.2.1 flags signal pm_nl_set_limits $ns2 1 2 pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow addr_nr_ns1=-1 addr_nr_ns2=-1 speed=slow \ run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 2 2 2 chk_add_nr 1 1 chk_rm_nr 1 1 chk_rst_nr 0 0 fi # subflows and signal, remove if reset "remove subflows and signal"; then pm_nl_set_limits $ns1 0 3 pm_nl_add_endpoint $ns1 10.0.2.1 flags signal pm_nl_set_limits $ns2 1 3 pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow pm_nl_add_endpoint $ns2 10.0.4.2 flags subflow addr_nr_ns1=-1 addr_nr_ns2=-2 speed=10 \ run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 3 3 3 chk_add_nr 1 1 chk_rm_nr 2 2 chk_rst_nr 0 0 fi # addresses remove if reset "remove addresses"; then pm_nl_set_limits $ns1 3 3 pm_nl_add_endpoint $ns1 10.0.2.1 flags signal id 250 pm_nl_add_endpoint $ns1 10.0.3.1 flags signal pm_nl_add_endpoint $ns1 10.0.4.1 flags signal pm_nl_set_limits $ns2 3 3 addr_nr_ns1=-3 speed=10 \ run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 3 3 3 chk_add_nr 3 3 chk_rm_nr 3 3 invert chk_rst_nr 0 0 fi # invalid addresses remove if reset "remove invalid addresses"; then pm_nl_set_limits $ns1 3 3 pm_nl_add_endpoint $ns1 10.0.12.1 flags signal pm_nl_add_endpoint $ns1 10.0.3.1 flags signal pm_nl_add_endpoint $ns1 10.0.14.1 flags signal pm_nl_set_limits $ns2 3 3 addr_nr_ns1=-3 speed=10 \ run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 1 1 1 chk_add_nr 3 3 chk_rm_nr 3 1 invert chk_rst_nr 0 0 fi # subflows and signal, flush if reset "flush subflows and signal"; then pm_nl_set_limits $ns1 0 3 pm_nl_add_endpoint $ns1 10.0.2.1 flags signal pm_nl_set_limits $ns2 1 3 pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow pm_nl_add_endpoint $ns2 10.0.4.2 flags subflow addr_nr_ns1=-8 addr_nr_ns2=-8 speed=slow \ run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 3 3 3 chk_add_nr 1 1 chk_rm_nr 1 3 invert simult chk_rst_nr 0 0 fi # subflows flush if reset "flush subflows"; then pm_nl_set_limits $ns1 3 3 pm_nl_set_limits $ns2 3 3 pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow id 150 pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow pm_nl_add_endpoint $ns2 10.0.4.2 flags subflow addr_nr_ns1=-8 addr_nr_ns2=-8 speed=slow \ run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 3 3 3 if mptcp_lib_kversion_ge 5.18; then chk_rm_tx_nr 0 chk_rm_nr 0 3 simult else chk_rm_nr 3 3 fi chk_rst_nr 0 0 fi # addresses flush if reset "flush addresses"; then pm_nl_set_limits $ns1 3 3 pm_nl_add_endpoint $ns1 10.0.2.1 flags signal id 250 pm_nl_add_endpoint $ns1 10.0.3.1 flags signal pm_nl_add_endpoint $ns1 10.0.4.1 flags signal pm_nl_set_limits $ns2 3 3 addr_nr_ns1=-8 addr_nr_ns2=-8 speed=slow \ run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 3 3 3 chk_add_nr 3 3 chk_rm_nr 3 3 invert simult chk_rst_nr 0 0 fi # invalid addresses flush if reset "flush invalid addresses"; then pm_nl_set_limits $ns1 3 3 pm_nl_add_endpoint $ns1 10.0.12.1 flags signal pm_nl_add_endpoint $ns1 10.0.3.1 flags signal pm_nl_add_endpoint $ns1 10.0.14.1 flags signal pm_nl_set_limits $ns2 3 3 addr_nr_ns1=-8 speed=slow \ run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 1 1 1 chk_add_nr 3 3 chk_rm_nr 3 1 invert chk_rst_nr 0 0 fi # remove id 0 subflow if reset "remove id 0 subflow"; then pm_nl_set_limits $ns1 0 1 pm_nl_set_limits $ns2 0 1 pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow addr_nr_ns2=-9 speed=slow \ run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 1 1 1 chk_rm_nr 1 1 chk_rst_nr 0 0 fi # remove id 0 address if reset "remove id 0 address"; then pm_nl_set_limits $ns1 0 1 pm_nl_add_endpoint $ns1 10.0.2.1 flags signal pm_nl_set_limits $ns2 1 1 addr_nr_ns1=-9 speed=slow \ run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 1 1 1 chk_add_nr 1 1 chk_rm_nr 1 1 invert chk_rst_nr 0 0 invert fi } add_tests() { # add single subflow if reset "add single subflow"; then pm_nl_set_limits $ns1 0 1 pm_nl_set_limits $ns2 0 1 addr_nr_ns2=1 speed=slow cestab_ns2=1 \ run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 1 1 1 chk_cestab_nr $ns2 0 fi # add signal address if reset "add signal address"; then pm_nl_set_limits $ns1 0 1 pm_nl_set_limits $ns2 1 1 addr_nr_ns1=1 speed=slow cestab_ns1=1 \ run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 1 1 1 chk_add_nr 1 1 chk_cestab_nr $ns1 0 fi # add multiple subflows if reset "add multiple subflows"; then pm_nl_set_limits $ns1 0 2 pm_nl_set_limits $ns2 0 2 addr_nr_ns2=2 speed=slow cestab_ns2=1 \ run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 2 2 2 chk_cestab_nr $ns2 0 fi # add multiple subflows IPv6 if reset "add multiple subflows IPv6"; then pm_nl_set_limits $ns1 0 2 pm_nl_set_limits $ns2 0 2 addr_nr_ns2=2 speed=slow cestab_ns2=1 \ run_tests $ns1 $ns2 dead:beef:1::1 chk_join_nr 2 2 2 chk_cestab_nr $ns2 0 fi # add multiple addresses IPv6 if reset "add multiple addresses IPv6"; then pm_nl_set_limits $ns1 0 2 pm_nl_set_limits $ns2 2 2 addr_nr_ns1=2 speed=slow cestab_ns1=1 \ run_tests $ns1 $ns2 dead:beef:1::1 chk_join_nr 2 2 2 chk_add_nr 2 2 chk_cestab_nr $ns1 0 fi } ipv6_tests() { # subflow IPv6 if reset "single subflow IPv6"; then pm_nl_set_limits $ns1 0 1 pm_nl_set_limits $ns2 0 1 pm_nl_add_endpoint $ns2 dead:beef:3::2 dev ns2eth3 flags subflow speed=slow \ run_tests $ns1 $ns2 dead:beef:1::1 chk_join_nr 1 1 1 fi # add_address, unused IPv6 if reset "unused signal address IPv6"; then pm_nl_add_endpoint $ns1 dead:beef:2::1 flags signal speed=slow \ run_tests $ns1 $ns2 dead:beef:1::1 chk_join_nr 0 0 0 chk_add_nr 1 1 fi # signal address IPv6 if reset "single address IPv6"; then pm_nl_set_limits $ns1 0 1 pm_nl_add_endpoint $ns1 dead:beef:2::1 flags signal pm_nl_set_limits $ns2 1 1 speed=slow \ run_tests $ns1 $ns2 dead:beef:1::1 chk_join_nr 1 1 1 chk_add_nr 1 1 fi # single address IPv6, remove if reset "remove single address IPv6"; then pm_nl_set_limits $ns1 0 1 pm_nl_add_endpoint $ns1 dead:beef:2::1 flags signal pm_nl_set_limits $ns2 1 1 addr_nr_ns1=-1 speed=slow \ run_tests $ns1 $ns2 dead:beef:1::1 chk_join_nr 1 1 1 chk_add_nr 1 1 chk_rm_nr 1 1 invert fi # subflow and signal IPv6, remove if reset "remove subflow and signal IPv6"; then pm_nl_set_limits $ns1 0 2 pm_nl_add_endpoint $ns1 dead:beef:2::1 flags signal pm_nl_set_limits $ns2 1 2 pm_nl_add_endpoint $ns2 dead:beef:3::2 dev ns2eth3 flags subflow addr_nr_ns1=-1 addr_nr_ns2=-1 speed=slow \ run_tests $ns1 $ns2 dead:beef:1::1 chk_join_nr 2 2 2 chk_add_nr 1 1 chk_rm_nr 1 1 fi } v4mapped_tests() { # subflow IPv4-mapped to IPv4-mapped if reset "single subflow IPv4-mapped"; then pm_nl_set_limits $ns1 0 1 pm_nl_set_limits $ns2 0 1 pm_nl_add_endpoint $ns2 "::ffff:10.0.3.2" flags subflow run_tests $ns1 $ns2 "::ffff:10.0.1.1" chk_join_nr 1 1 1 fi # signal address IPv4-mapped with IPv4-mapped sk if reset "signal address IPv4-mapped"; then pm_nl_set_limits $ns1 0 1 pm_nl_set_limits $ns2 1 1 pm_nl_add_endpoint $ns1 "::ffff:10.0.2.1" flags signal run_tests $ns1 $ns2 "::ffff:10.0.1.1" chk_join_nr 1 1 1 chk_add_nr 1 1 fi # subflow v4-map-v6 if reset "single subflow v4-map-v6"; then pm_nl_set_limits $ns1 0 1 pm_nl_set_limits $ns2 0 1 pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow run_tests $ns1 $ns2 "::ffff:10.0.1.1" chk_join_nr 1 1 1 fi # signal address v4-map-v6 if reset "signal address v4-map-v6"; then pm_nl_set_limits $ns1 0 1 pm_nl_set_limits $ns2 1 1 pm_nl_add_endpoint $ns1 10.0.2.1 flags signal run_tests $ns1 $ns2 "::ffff:10.0.1.1" chk_join_nr 1 1 1 chk_add_nr 1 1 fi # subflow v6-map-v4 if reset "single subflow v6-map-v4"; then pm_nl_set_limits $ns1 0 1 pm_nl_set_limits $ns2 0 1 pm_nl_add_endpoint $ns2 "::ffff:10.0.3.2" flags subflow run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 1 1 1 fi # signal address v6-map-v4 if reset "signal address v6-map-v4"; then pm_nl_set_limits $ns1 0 1 pm_nl_set_limits $ns2 1 1 pm_nl_add_endpoint $ns1 "::ffff:10.0.2.1" flags signal run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 1 1 1 chk_add_nr 1 1 fi # no subflow IPv6 to v4 address if reset "no JOIN with diff families v4-v6"; then pm_nl_set_limits $ns1 0 1 pm_nl_set_limits $ns2 0 1 pm_nl_add_endpoint $ns2 dead:beef:2::2 flags subflow run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 0 0 0 fi # no subflow IPv6 to v4 address even if v6 has a valid v4 at the end if reset "no JOIN with diff families v4-v6-2"; then pm_nl_set_limits $ns1 0 1 pm_nl_set_limits $ns2 0 1 pm_nl_add_endpoint $ns2 dead:beef:2::10.0.3.2 flags subflow run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 0 0 0 fi # no subflow IPv4 to v6 address, no need to slow down too then if reset "no JOIN with diff families v6-v4"; then pm_nl_set_limits $ns1 0 1 pm_nl_set_limits $ns2 0 1 pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow run_tests $ns1 $ns2 dead:beef:1::1 chk_join_nr 0 0 0 fi } mixed_tests() { if reset "IPv4 sockets do not use IPv6 addresses" && continue_if mptcp_lib_kversion_ge 6.3; then pm_nl_set_limits $ns1 0 1 pm_nl_set_limits $ns2 1 1 pm_nl_add_endpoint $ns1 dead:beef:2::1 flags signal speed=slow \ run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 0 0 0 fi # Need an IPv6 mptcp socket to allow subflows of both families if reset "simult IPv4 and IPv6 subflows" && continue_if mptcp_lib_kversion_ge 6.3; then pm_nl_set_limits $ns1 0 1 pm_nl_set_limits $ns2 1 1 pm_nl_add_endpoint $ns1 10.0.1.1 flags signal speed=slow \ run_tests $ns1 $ns2 dead:beef:2::1 chk_join_nr 1 1 1 fi # cross families subflows will not be created even in fullmesh mode if reset "simult IPv4 and IPv6 subflows, fullmesh 1x1" && continue_if mptcp_lib_kversion_ge 6.3; then pm_nl_set_limits $ns1 0 4 pm_nl_set_limits $ns2 1 4 pm_nl_add_endpoint $ns2 dead:beef:2::2 flags subflow,fullmesh pm_nl_add_endpoint $ns1 10.0.1.1 flags signal speed=slow \ run_tests $ns1 $ns2 dead:beef:2::1 chk_join_nr 1 1 1 fi # fullmesh still tries to create all the possibly subflows with # matching family if reset "simult IPv4 and IPv6 subflows, fullmesh 2x2" && continue_if mptcp_lib_kversion_ge 6.3; then pm_nl_set_limits $ns1 0 4 pm_nl_set_limits $ns2 2 4 pm_nl_add_endpoint $ns1 10.0.2.1 flags signal pm_nl_add_endpoint $ns1 dead:beef:2::1 flags signal fullmesh=1 speed=slow \ run_tests $ns1 $ns2 dead:beef:1::1 chk_join_nr 4 4 4 fi } backup_tests() { # single subflow, backup if reset "single subflow, backup" && continue_if mptcp_lib_kallsyms_has "subflow_rebuild_header$"; then pm_nl_set_limits $ns1 0 1 pm_nl_set_limits $ns2 0 1 pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow,backup sflags=nobackup speed=slow \ run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 1 1 1 chk_prio_nr 0 1 fi # single address, backup if reset "single address, backup" && continue_if mptcp_lib_kallsyms_has "subflow_rebuild_header$"; then pm_nl_set_limits $ns1 0 1 pm_nl_add_endpoint $ns1 10.0.2.1 flags signal pm_nl_set_limits $ns2 1 1 sflags=backup speed=slow \ run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 1 1 1 chk_add_nr 1 1 chk_prio_nr 1 1 fi # single address with port, backup if reset "single address with port, backup" && continue_if mptcp_lib_kallsyms_has "subflow_rebuild_header$"; then pm_nl_set_limits $ns1 0 1 pm_nl_add_endpoint $ns1 10.0.2.1 flags signal port 10100 pm_nl_set_limits $ns2 1 1 sflags=backup speed=slow \ run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 1 1 1 chk_add_nr 1 1 chk_prio_nr 1 1 fi if reset "mpc backup" && continue_if mptcp_lib_kallsyms_doesnt_have "T mptcp_subflow_send_ack$"; then pm_nl_add_endpoint $ns2 10.0.1.2 flags subflow,backup speed=slow \ run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 0 0 0 chk_prio_nr 0 1 fi if reset "mpc backup both sides" && continue_if mptcp_lib_kallsyms_doesnt_have "T mptcp_subflow_send_ack$"; then pm_nl_add_endpoint $ns1 10.0.1.1 flags subflow,backup pm_nl_add_endpoint $ns2 10.0.1.2 flags subflow,backup speed=slow \ run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 0 0 0 chk_prio_nr 1 1 fi if reset "mpc switch to backup" && continue_if mptcp_lib_kallsyms_doesnt_have "T mptcp_subflow_send_ack$"; then pm_nl_add_endpoint $ns2 10.0.1.2 flags subflow sflags=backup speed=slow \ run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 0 0 0 chk_prio_nr 0 1 fi if reset "mpc switch to backup both sides" && continue_if mptcp_lib_kallsyms_doesnt_have "T mptcp_subflow_send_ack$"; then pm_nl_add_endpoint $ns1 10.0.1.1 flags subflow pm_nl_add_endpoint $ns2 10.0.1.2 flags subflow sflags=backup speed=slow \ run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 0 0 0 chk_prio_nr 1 1 fi } verify_listener_events() { local e_type=$2 local e_saddr=$4 local e_sport=$5 local name if [ $e_type = $MPTCP_LIB_EVENT_LISTENER_CREATED ]; then name="LISTENER_CREATED" elif [ $e_type = $MPTCP_LIB_EVENT_LISTENER_CLOSED ]; then name="LISTENER_CLOSED " else name="$e_type" fi print_check "$name $e_saddr:$e_sport" if ! mptcp_lib_kallsyms_has "mptcp_event_pm_listener$"; then print_skip "event not supported" return fi if mptcp_lib_verify_listener_events "${@}"; then print_ok return 0 fi fail_test } add_addr_ports_tests() { # signal address with port if reset "signal address with port"; then pm_nl_set_limits $ns1 0 1 pm_nl_set_limits $ns2 1 1 pm_nl_add_endpoint $ns1 10.0.2.1 flags signal port 10100 run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 1 1 1 chk_add_nr 1 1 1 fi # subflow and signal with port if reset "subflow and signal with port"; then pm_nl_add_endpoint $ns1 10.0.2.1 flags signal port 10100 pm_nl_set_limits $ns1 0 2 pm_nl_set_limits $ns2 1 2 pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 2 2 2 chk_add_nr 1 1 1 fi # single address with port, remove # pm listener events if reset_with_events "remove single address with port"; then pm_nl_set_limits $ns1 0 1 pm_nl_add_endpoint $ns1 10.0.2.1 flags signal port 10100 pm_nl_set_limits $ns2 1 1 addr_nr_ns1=-1 speed=slow \ run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 1 1 1 chk_add_nr 1 1 1 chk_rm_nr 1 1 invert verify_listener_events $evts_ns1 $MPTCP_LIB_EVENT_LISTENER_CREATED \ $MPTCP_LIB_AF_INET 10.0.2.1 10100 verify_listener_events $evts_ns1 $MPTCP_LIB_EVENT_LISTENER_CLOSED \ $MPTCP_LIB_AF_INET 10.0.2.1 10100 kill_events_pids fi # subflow and signal with port, remove if reset "remove subflow and signal with port"; then pm_nl_set_limits $ns1 0 2 pm_nl_add_endpoint $ns1 10.0.2.1 flags signal port 10100 pm_nl_set_limits $ns2 1 2 pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow addr_nr_ns1=-1 addr_nr_ns2=-1 speed=slow \ run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 2 2 2 chk_add_nr 1 1 1 chk_rm_nr 1 1 fi # subflows and signal with port, flush if reset "flush subflows and signal with port"; then pm_nl_set_limits $ns1 0 3 pm_nl_add_endpoint $ns1 10.0.2.1 flags signal port 10100 pm_nl_set_limits $ns2 1 3 pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow pm_nl_add_endpoint $ns2 10.0.4.2 flags subflow addr_nr_ns1=-8 addr_nr_ns2=-2 speed=slow \ run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 3 3 3 chk_add_nr 1 1 chk_rm_nr 1 3 invert simult fi # multiple addresses with port if reset "multiple addresses with port"; then pm_nl_set_limits $ns1 2 2 pm_nl_add_endpoint $ns1 10.0.2.1 flags signal port 10100 pm_nl_add_endpoint $ns1 10.0.3.1 flags signal port 10100 pm_nl_set_limits $ns2 2 2 run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 2 2 2 chk_add_nr 2 2 2 fi # multiple addresses with ports if reset "multiple addresses with ports"; then pm_nl_set_limits $ns1 2 2 pm_nl_add_endpoint $ns1 10.0.2.1 flags signal port 10100 pm_nl_add_endpoint $ns1 10.0.3.1 flags signal port 10101 pm_nl_set_limits $ns2 2 2 run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 2 2 2 chk_add_nr 2 2 2 fi } syncookies_tests() { # single subflow, syncookies if reset_with_cookies "single subflow with syn cookies"; then pm_nl_set_limits $ns1 0 1 pm_nl_set_limits $ns2 0 1 pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 1 1 1 fi # multiple subflows with syn cookies if reset_with_cookies "multiple subflows with syn cookies"; then pm_nl_set_limits $ns1 0 2 pm_nl_set_limits $ns2 0 2 pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 2 2 2 fi # multiple subflows limited by server if reset_with_cookies "subflows limited by server w cookies"; then pm_nl_set_limits $ns1 0 1 pm_nl_set_limits $ns2 0 2 pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 2 1 1 fi # test signal address with cookies if reset_with_cookies "signal address with syn cookies"; then pm_nl_set_limits $ns1 0 1 pm_nl_set_limits $ns2 1 1 pm_nl_add_endpoint $ns1 10.0.2.1 flags signal run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 1 1 1 chk_add_nr 1 1 fi # test cookie with subflow and signal if reset_with_cookies "subflow and signal w cookies"; then pm_nl_add_endpoint $ns1 10.0.2.1 flags signal pm_nl_set_limits $ns1 0 2 pm_nl_set_limits $ns2 1 2 pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 2 2 2 chk_add_nr 1 1 fi # accept and use add_addr with additional subflows if reset_with_cookies "subflows and signal w. cookies"; then pm_nl_set_limits $ns1 0 3 pm_nl_add_endpoint $ns1 10.0.2.1 flags signal pm_nl_set_limits $ns2 1 3 pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow pm_nl_add_endpoint $ns2 10.0.4.2 flags subflow run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 3 3 3 chk_add_nr 1 1 fi } checksum_tests() { # checksum test 0 0 if reset_with_checksum 0 0; then pm_nl_set_limits $ns1 0 1 pm_nl_set_limits $ns2 0 1 run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 0 0 0 fi # checksum test 1 1 if reset_with_checksum 1 1; then pm_nl_set_limits $ns1 0 1 pm_nl_set_limits $ns2 0 1 run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 0 0 0 fi # checksum test 0 1 if reset_with_checksum 0 1; then pm_nl_set_limits $ns1 0 1 pm_nl_set_limits $ns2 0 1 run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 0 0 0 fi # checksum test 1 0 if reset_with_checksum 1 0; then pm_nl_set_limits $ns1 0 1 pm_nl_set_limits $ns2 0 1 run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 0 0 0 fi } deny_join_id0_tests() { # subflow allow join id0 ns1 if reset_with_allow_join_id0 "single subflow allow join id0 ns1" 1 0; then pm_nl_set_limits $ns1 1 1 pm_nl_set_limits $ns2 1 1 pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 1 1 1 fi # subflow allow join id0 ns2 if reset_with_allow_join_id0 "single subflow allow join id0 ns2" 0 1; then pm_nl_set_limits $ns1 1 1 pm_nl_set_limits $ns2 1 1 pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 0 0 0 fi # signal address allow join id0 ns1 # ADD_ADDRs are not affected by allow_join_id0 value. if reset_with_allow_join_id0 "signal address allow join id0 ns1" 1 0; then pm_nl_set_limits $ns1 1 1 pm_nl_set_limits $ns2 1 1 pm_nl_add_endpoint $ns1 10.0.2.1 flags signal run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 1 1 1 chk_add_nr 1 1 fi # signal address allow join id0 ns2 # ADD_ADDRs are not affected by allow_join_id0 value. if reset_with_allow_join_id0 "signal address allow join id0 ns2" 0 1; then pm_nl_set_limits $ns1 1 1 pm_nl_set_limits $ns2 1 1 pm_nl_add_endpoint $ns1 10.0.2.1 flags signal run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 1 1 1 chk_add_nr 1 1 fi # subflow and address allow join id0 ns1 if reset_with_allow_join_id0 "subflow and address allow join id0 1" 1 0; then pm_nl_set_limits $ns1 2 2 pm_nl_set_limits $ns2 2 2 pm_nl_add_endpoint $ns1 10.0.2.1 flags signal pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 2 2 2 fi # subflow and address allow join id0 ns2 if reset_with_allow_join_id0 "subflow and address allow join id0 2" 0 1; then pm_nl_set_limits $ns1 2 2 pm_nl_set_limits $ns2 2 2 pm_nl_add_endpoint $ns1 10.0.2.1 flags signal pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 1 1 1 fi } fullmesh_tests() { # fullmesh 1 # 2 fullmesh addrs in ns2, added before the connection, # 1 non-fullmesh addr in ns1, added during the connection. if reset "fullmesh test 2x1"; then pm_nl_set_limits $ns1 0 4 pm_nl_set_limits $ns2 1 4 pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow,fullmesh pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow,fullmesh addr_nr_ns1=1 speed=slow \ run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 4 4 4 chk_add_nr 1 1 fi # fullmesh 2 # 1 non-fullmesh addr in ns1, added before the connection, # 1 fullmesh addr in ns2, added during the connection. if reset "fullmesh test 1x1"; then pm_nl_set_limits $ns1 1 3 pm_nl_set_limits $ns2 1 3 pm_nl_add_endpoint $ns1 10.0.2.1 flags signal fullmesh=1 speed=slow \ run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 3 3 3 chk_add_nr 1 1 fi # fullmesh 3 # 1 non-fullmesh addr in ns1, added before the connection, # 2 fullmesh addrs in ns2, added during the connection. if reset "fullmesh test 1x2"; then pm_nl_set_limits $ns1 2 5 pm_nl_set_limits $ns2 1 5 pm_nl_add_endpoint $ns1 10.0.2.1 flags signal fullmesh=2 speed=slow \ run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 5 5 5 chk_add_nr 1 1 fi # fullmesh 4 # 1 non-fullmesh addr in ns1, added before the connection, # 2 fullmesh addrs in ns2, added during the connection, # limit max_subflows to 4. if reset "fullmesh test 1x2, limited"; then pm_nl_set_limits $ns1 2 4 pm_nl_set_limits $ns2 1 4 pm_nl_add_endpoint $ns1 10.0.2.1 flags signal fullmesh=2 speed=slow \ run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 4 4 4 chk_add_nr 1 1 fi # set fullmesh flag if reset "set fullmesh flag test" && continue_if mptcp_lib_kversion_ge 5.18; then pm_nl_set_limits $ns1 4 4 pm_nl_add_endpoint $ns1 10.0.2.1 flags subflow pm_nl_set_limits $ns2 4 4 addr_nr_ns2=1 sflags=fullmesh speed=slow \ run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 2 2 2 chk_rm_nr 0 1 fi # set nofullmesh flag if reset "set nofullmesh flag test" && continue_if mptcp_lib_kversion_ge 5.18; then pm_nl_set_limits $ns1 4 4 pm_nl_add_endpoint $ns1 10.0.2.1 flags subflow,fullmesh pm_nl_set_limits $ns2 4 4 fullmesh=1 sflags=nofullmesh speed=slow \ run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 2 2 2 chk_rm_nr 0 1 fi # set backup,fullmesh flags if reset "set backup,fullmesh flags test" && continue_if mptcp_lib_kversion_ge 5.18; then pm_nl_set_limits $ns1 4 4 pm_nl_add_endpoint $ns1 10.0.2.1 flags subflow pm_nl_set_limits $ns2 4 4 addr_nr_ns2=1 sflags=backup,fullmesh speed=slow \ run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 2 2 2 chk_prio_nr 0 1 chk_rm_nr 0 1 fi # set nobackup,nofullmesh flags if reset "set nobackup,nofullmesh flags test" && continue_if mptcp_lib_kversion_ge 5.18; then pm_nl_set_limits $ns1 4 4 pm_nl_set_limits $ns2 4 4 pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow,backup,fullmesh sflags=nobackup,nofullmesh speed=slow \ run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 2 2 2 chk_prio_nr 0 1 chk_rm_nr 0 1 fi } fastclose_tests() { if reset_check_counter "fastclose test" "MPTcpExtMPFastcloseTx"; then test_linkfail=1024 fastclose=client \ run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 0 0 0 chk_fclose_nr 1 1 chk_rst_nr 1 1 invert fi if reset_check_counter "fastclose server test" "MPTcpExtMPFastcloseRx"; then test_linkfail=1024 fastclose=server \ run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 0 0 0 0 0 0 1 chk_fclose_nr 1 1 invert chk_rst_nr 1 1 fi } pedit_action_pkts() { tc -n $ns2 -j -s action show action pedit index 100 | \ mptcp_lib_get_info_value \"packets\" packets } fail_tests() { # single subflow if reset_with_fail "Infinite map" 1; then test_linkfail=128 \ run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 0 0 0 +1 +0 1 0 1 "$(pedit_action_pkts)" chk_fail_nr 1 -1 invert fi # multiple subflows if reset_with_fail "MP_FAIL MP_RST" 2; then tc -n $ns2 qdisc add dev ns2eth1 root netem rate 1mbit delay 5 pm_nl_set_limits $ns1 0 1 pm_nl_set_limits $ns2 0 1 pm_nl_add_endpoint $ns2 10.0.2.2 dev ns2eth2 flags subflow test_linkfail=1024 \ run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 1 1 1 1 0 1 1 0 "$(pedit_action_pkts)" fi } # $1: ns ; $2: addr ; $3: id userspace_pm_add_addr() { local evts=$evts_ns1 local tk [ "$1" == "$ns2" ] && evts=$evts_ns2 tk=$(mptcp_lib_evts_get_info token "$evts") ip netns exec $1 ./pm_nl_ctl ann $2 token $tk id $3 sleep 1 } # $1: ns ; $2: id userspace_pm_rm_addr() { local evts=$evts_ns1 local tk local cnt [ "$1" == "$ns2" ] && evts=$evts_ns2 tk=$(mptcp_lib_evts_get_info token "$evts") cnt=$(rm_addr_count ${1}) ip netns exec $1 ./pm_nl_ctl rem token $tk id $2 wait_rm_addr $1 "${cnt}" } # $1: ns ; $2: addr ; $3: id userspace_pm_add_sf() { local evts=$evts_ns1 local tk da dp [ "$1" == "$ns2" ] && evts=$evts_ns2 tk=$(mptcp_lib_evts_get_info token "$evts") da=$(mptcp_lib_evts_get_info daddr4 "$evts") dp=$(mptcp_lib_evts_get_info dport "$evts") ip netns exec $1 ./pm_nl_ctl csf lip $2 lid $3 \ rip $da rport $dp token $tk sleep 1 } # $1: ns ; $2: addr $3: event type userspace_pm_rm_sf() { local evts=$evts_ns1 local t=${3:-1} local ip local tk da dp sp local cnt [ "$1" == "$ns2" ] && evts=$evts_ns2 [ -n "$(mptcp_lib_evts_get_info "saddr4" "$evts" $t)" ] && ip=4 [ -n "$(mptcp_lib_evts_get_info "saddr6" "$evts" $t)" ] && ip=6 tk=$(mptcp_lib_evts_get_info token "$evts") da=$(mptcp_lib_evts_get_info "daddr$ip" "$evts" $t $2) dp=$(mptcp_lib_evts_get_info dport "$evts" $t $2) sp=$(mptcp_lib_evts_get_info sport "$evts" $t $2) cnt=$(rm_sf_count ${1}) ip netns exec $1 ./pm_nl_ctl dsf lip $2 lport $sp \ rip $da rport $dp token $tk wait_rm_sf $1 "${cnt}" } check_output() { local cmd="$1" local expected="$2" local msg="$3" local rc=0 mptcp_lib_check_output "${err}" "${cmd}" "${expected}" || rc=${?} if [ ${rc} -eq 2 ]; then fail_test "fail to check output # error ${rc}" elif [ ${rc} -eq 0 ]; then print_ok elif [ ${rc} -eq 1 ]; then fail_test "fail to check output # different output" fi } # $1: ns userspace_pm_dump() { local evts=$evts_ns1 local tk [ "$1" == "$ns2" ] && evts=$evts_ns2 tk=$(mptcp_lib_evts_get_info token "$evts") ip netns exec $1 ./pm_nl_ctl dump token $tk } # $1: ns ; $2: id userspace_pm_get_addr() { local evts=$evts_ns1 local tk [ "$1" == "$ns2" ] && evts=$evts_ns2 tk=$(mptcp_lib_evts_get_info token "$evts") ip netns exec $1 ./pm_nl_ctl get $2 token $tk } userspace_pm_chk_dump_addr() { local ns="${1}" local exp="${2}" local check="${3}" print_check "dump addrs ${check}" if mptcp_lib_kallsyms_has "mptcp_userspace_pm_dump_addr$"; then check_output "userspace_pm_dump ${ns}" "${exp}" else print_skip fi } userspace_pm_chk_get_addr() { local ns="${1}" local id="${2}" local exp="${3}" print_check "get id ${id} addr" if mptcp_lib_kallsyms_has "mptcp_userspace_pm_get_addr$"; then check_output "userspace_pm_get_addr ${ns} ${id}" "${exp}" else print_skip fi } userspace_tests() { # userspace pm type prevents add_addr if reset "userspace pm type prevents add_addr" && continue_if mptcp_lib_has_file '/proc/sys/net/mptcp/pm_type'; then set_userspace_pm $ns1 pm_nl_set_limits $ns1 0 2 pm_nl_set_limits $ns2 0 2 pm_nl_add_endpoint $ns1 10.0.2.1 flags signal run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 0 0 0 chk_add_nr 0 0 fi # userspace pm type does not echo add_addr without daemon if reset "userspace pm no echo w/o daemon" && continue_if mptcp_lib_has_file '/proc/sys/net/mptcp/pm_type'; then set_userspace_pm $ns2 pm_nl_set_limits $ns1 0 2 pm_nl_set_limits $ns2 0 2 pm_nl_add_endpoint $ns1 10.0.2.1 flags signal run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 0 0 0 chk_add_nr 1 0 fi # userspace pm type rejects join if reset "userspace pm type rejects join" && continue_if mptcp_lib_has_file '/proc/sys/net/mptcp/pm_type'; then set_userspace_pm $ns1 pm_nl_set_limits $ns1 1 1 pm_nl_set_limits $ns2 1 1 pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 1 1 0 fi # userspace pm type does not send join if reset "userspace pm type does not send join" && continue_if mptcp_lib_has_file '/proc/sys/net/mptcp/pm_type'; then set_userspace_pm $ns2 pm_nl_set_limits $ns1 1 1 pm_nl_set_limits $ns2 1 1 pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 0 0 0 fi # userspace pm type prevents mp_prio if reset "userspace pm type prevents mp_prio" && continue_if mptcp_lib_has_file '/proc/sys/net/mptcp/pm_type'; then set_userspace_pm $ns1 pm_nl_set_limits $ns1 1 1 pm_nl_set_limits $ns2 1 1 pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow sflags=backup speed=slow \ run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 1 1 0 chk_prio_nr 0 0 fi # userspace pm type prevents rm_addr if reset "userspace pm type prevents rm_addr" && continue_if mptcp_lib_has_file '/proc/sys/net/mptcp/pm_type'; then set_userspace_pm $ns1 set_userspace_pm $ns2 pm_nl_set_limits $ns1 0 1 pm_nl_set_limits $ns2 0 1 pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow addr_nr_ns2=-1 speed=slow \ run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 0 0 0 chk_rm_nr 0 0 fi # userspace pm add & remove address if reset_with_events "userspace pm add & remove address" && continue_if mptcp_lib_has_file '/proc/sys/net/mptcp/pm_type'; then set_userspace_pm $ns1 pm_nl_set_limits $ns2 2 2 speed=5 \ run_tests $ns1 $ns2 10.0.1.1 & local tests_pid=$! wait_mpj $ns1 userspace_pm_add_addr $ns1 10.0.2.1 10 userspace_pm_add_addr $ns1 10.0.3.1 20 chk_join_nr 2 2 2 chk_add_nr 2 2 chk_mptcp_info subflows 2 subflows 2 chk_subflows_total 3 3 chk_mptcp_info add_addr_signal 2 add_addr_accepted 2 userspace_pm_chk_dump_addr "${ns1}" \ $'id 10 flags signal 10.0.2.1\nid 20 flags signal 10.0.3.1' \ "signal" userspace_pm_chk_get_addr "${ns1}" "10" "id 10 flags signal 10.0.2.1" userspace_pm_chk_get_addr "${ns1}" "20" "id 20 flags signal 10.0.3.1" userspace_pm_rm_addr $ns1 10 userspace_pm_rm_sf $ns1 "::ffff:10.0.2.1" $MPTCP_LIB_EVENT_SUB_ESTABLISHED userspace_pm_chk_dump_addr "${ns1}" \ "id 20 flags signal 10.0.3.1" "after rm_addr 10" userspace_pm_rm_addr $ns1 20 userspace_pm_rm_sf $ns1 10.0.3.1 $MPTCP_LIB_EVENT_SUB_ESTABLISHED userspace_pm_chk_dump_addr "${ns1}" "" "after rm_addr 20" chk_rm_nr 2 2 invert chk_mptcp_info subflows 0 subflows 0 chk_subflows_total 1 1 kill_events_pids mptcp_lib_kill_wait $tests_pid fi # userspace pm create destroy subflow if reset_with_events "userspace pm create destroy subflow" && continue_if mptcp_lib_has_file '/proc/sys/net/mptcp/pm_type'; then set_userspace_pm $ns2 pm_nl_set_limits $ns1 0 1 speed=5 \ run_tests $ns1 $ns2 10.0.1.1 & local tests_pid=$! wait_mpj $ns2 userspace_pm_add_sf $ns2 10.0.3.2 20 chk_join_nr 1 1 1 chk_mptcp_info subflows 1 subflows 1 chk_subflows_total 2 2 userspace_pm_chk_dump_addr "${ns2}" \ "id 20 flags subflow 10.0.3.2" \ "subflow" userspace_pm_chk_get_addr "${ns2}" "20" "id 20 flags subflow 10.0.3.2" userspace_pm_rm_addr $ns2 20 userspace_pm_rm_sf $ns2 10.0.3.2 $MPTCP_LIB_EVENT_SUB_ESTABLISHED userspace_pm_chk_dump_addr "${ns2}" \ "" \ "after rm_addr 20" chk_rm_nr 1 1 chk_mptcp_info subflows 0 subflows 0 chk_subflows_total 1 1 kill_events_pids mptcp_lib_kill_wait $tests_pid fi # userspace pm create id 0 subflow if reset_with_events "userspace pm create id 0 subflow" && continue_if mptcp_lib_has_file '/proc/sys/net/mptcp/pm_type'; then set_userspace_pm $ns2 pm_nl_set_limits $ns1 0 1 speed=5 \ run_tests $ns1 $ns2 10.0.1.1 & local tests_pid=$! wait_mpj $ns2 chk_mptcp_info subflows 0 subflows 0 chk_subflows_total 1 1 userspace_pm_add_sf $ns2 10.0.3.2 0 userspace_pm_chk_dump_addr "${ns2}" \ "id 0 flags subflow 10.0.3.2" "id 0 subflow" chk_join_nr 1 1 1 chk_mptcp_info subflows 1 subflows 1 chk_subflows_total 2 2 kill_events_pids mptcp_lib_kill_wait $tests_pid fi # userspace pm remove initial subflow if reset_with_events "userspace pm remove initial subflow" && continue_if mptcp_lib_has_file '/proc/sys/net/mptcp/pm_type'; then set_userspace_pm $ns2 pm_nl_set_limits $ns1 0 1 speed=5 \ run_tests $ns1 $ns2 10.0.1.1 & local tests_pid=$! wait_mpj $ns2 userspace_pm_add_sf $ns2 10.0.3.2 20 chk_join_nr 1 1 1 chk_mptcp_info subflows 1 subflows 1 chk_subflows_total 2 2 userspace_pm_rm_sf $ns2 10.0.1.2 # we don't look at the counter linked to the RM_ADDR but # to the one linked to the subflows that have been removed chk_rm_nr 0 1 chk_rst_nr 0 0 invert chk_mptcp_info subflows 1 subflows 1 chk_subflows_total 1 1 kill_events_pids mptcp_lib_kill_wait $tests_pid fi # userspace pm send RM_ADDR for ID 0 if reset_with_events "userspace pm send RM_ADDR for ID 0" && continue_if mptcp_lib_has_file '/proc/sys/net/mptcp/pm_type'; then set_userspace_pm $ns1 pm_nl_set_limits $ns2 1 1 speed=5 \ run_tests $ns1 $ns2 10.0.1.1 & local tests_pid=$! wait_mpj $ns1 userspace_pm_add_addr $ns1 10.0.2.1 10 chk_join_nr 1 1 1 chk_add_nr 1 1 chk_mptcp_info subflows 1 subflows 1 chk_subflows_total 2 2 chk_mptcp_info add_addr_signal 1 add_addr_accepted 1 userspace_pm_rm_addr $ns1 0 # we don't look at the counter linked to the subflows that # have been removed but to the one linked to the RM_ADDR chk_rm_nr 1 0 invert chk_rst_nr 0 0 invert chk_mptcp_info subflows 1 subflows 1 chk_subflows_total 1 1 kill_events_pids mptcp_lib_kill_wait $tests_pid fi } endpoint_tests() { # subflow_rebuild_header is needed to support the implicit flag # userspace pm type prevents add_addr if reset "implicit EP" && mptcp_lib_kallsyms_has "subflow_rebuild_header$"; then pm_nl_set_limits $ns1 2 2 pm_nl_set_limits $ns2 2 2 pm_nl_add_endpoint $ns1 10.0.2.1 flags signal speed=slow \ run_tests $ns1 $ns2 10.0.1.1 & local tests_pid=$! wait_mpj $ns1 pm_nl_check_endpoint "creation" \ $ns2 10.0.2.2 id 1 flags implicit chk_mptcp_info subflows 1 subflows 1 chk_mptcp_info add_addr_signal 1 add_addr_accepted 1 pm_nl_add_endpoint $ns2 10.0.2.2 id 33 2>/dev/null pm_nl_check_endpoint "ID change is prevented" \ $ns2 10.0.2.2 id 1 flags implicit pm_nl_add_endpoint $ns2 10.0.2.2 flags signal pm_nl_check_endpoint "modif is allowed" \ $ns2 10.0.2.2 id 1 flags signal mptcp_lib_kill_wait $tests_pid fi if reset "delete and re-add" && mptcp_lib_kallsyms_has "subflow_rebuild_header$"; then pm_nl_set_limits $ns1 1 1 pm_nl_set_limits $ns2 1 1 pm_nl_add_endpoint $ns2 10.0.2.2 id 2 dev ns2eth2 flags subflow test_linkfail=4 speed=20 \ run_tests $ns1 $ns2 10.0.1.1 & local tests_pid=$! wait_mpj $ns2 chk_subflow_nr "before delete" 2 chk_mptcp_info subflows 1 subflows 1 pm_nl_del_endpoint $ns2 2 10.0.2.2 sleep 0.5 chk_subflow_nr "after delete" 1 chk_mptcp_info subflows 0 subflows 0 pm_nl_add_endpoint $ns2 10.0.2.2 dev ns2eth2 flags subflow wait_mpj $ns2 chk_subflow_nr "after re-add" 2 chk_mptcp_info subflows 1 subflows 1 mptcp_lib_kill_wait $tests_pid fi } # [$1: error message] usage() { if [ -n "${1}" ]; then echo "${1}" ret=${KSFT_FAIL} fi echo "mptcp_join usage:" local key for key in "${!all_tests[@]}"; do echo " -${key} ${all_tests[${key}]}" done echo " -c capture pcap files" echo " -C enable data checksum" echo " -i use ip mptcp" echo " -h help" echo "[test ids|names]" exit ${ret} } # Use a "simple" array to force an specific order we cannot have with an associative one all_tests_sorted=( f@subflows_tests e@subflows_error_tests s@signal_address_tests l@link_failure_tests t@add_addr_timeout_tests r@remove_tests a@add_tests 6@ipv6_tests 4@v4mapped_tests M@mixed_tests b@backup_tests p@add_addr_ports_tests k@syncookies_tests S@checksum_tests d@deny_join_id0_tests m@fullmesh_tests z@fastclose_tests F@fail_tests u@userspace_tests I@endpoint_tests ) all_tests_args="" all_tests_names=() for subtests in "${all_tests_sorted[@]}"; do key="${subtests%@*}" value="${subtests#*@}" all_tests_args+="${key}" all_tests_names+=("${value}") all_tests[${key}]="${value}" done tests=() while getopts "${all_tests_args}cCih" opt; do case $opt in ["${all_tests_args}"]) tests+=("${all_tests[${opt}]}") ;; c) capture=true ;; C) checksum=true ;; i) ip_mptcp=1 ;; h) usage ;; *) usage "Unknown option: -${opt}" ;; esac done shift $((OPTIND - 1)) for arg in "${@}"; do if [[ "${arg}" =~ ^[0-9]+$ ]]; then only_tests_ids+=("${arg}") else only_tests_names+=("${arg}") fi done if [ ${#tests[@]} -eq 0 ]; then tests=("${all_tests_names[@]}") fi for subtests in "${tests[@]}"; do "${subtests}" done if [ ${ret} -ne 0 ]; then echo echo "${#failed_tests[@]} failure(s) has(ve) been detected:" for i in $(get_failed_tests_ids); do echo -e "\t- ${i}: ${failed_tests[${i}]}" done echo fi append_prev_results mptcp_lib_result_print_all_tap exit $ret