#!/bin/bash # # This test is for checking rtnetlink callpaths, and get as much coverage as possible. # # set -e ALL_TESTS=" kci_test_polrouting kci_test_route_get kci_test_addrlft kci_test_promote_secondaries kci_test_tc kci_test_gre kci_test_gretap kci_test_ip6gretap kci_test_erspan kci_test_ip6erspan kci_test_bridge kci_test_addrlabel kci_test_ifalias kci_test_vrf kci_test_encap kci_test_macsec kci_test_macsec_offload kci_test_ipsec kci_test_ipsec_offload kci_test_fdb_get kci_test_neigh_get kci_test_bridge_parent_id kci_test_address_proto kci_test_enslave_bonding " devdummy="test-dummy0" VERBOSE=0 PAUSE=no PAUSE_ON_FAIL=no source lib.sh # set global exit status, but never reset nonzero one. check_err() { if [ $ret -eq 0 ]; then ret=$1 fi } # same but inverted -- used when command must fail for test to pass check_fail() { if [ $1 -eq 0 ]; then ret=1 fi } run_cmd_common() { local cmd="$*" local out if [ "$VERBOSE" = "1" ]; then echo "COMMAND: ${cmd}" fi out=$($cmd 2>&1) rc=$? if [ "$VERBOSE" = "1" -a -n "$out" ]; then echo " $out" fi return $rc } run_cmd() { run_cmd_common "$@" rc=$? check_err $rc return $rc } run_cmd_fail() { run_cmd_common "$@" rc=$? check_fail $rc return $rc } run_cmd_grep_common() { local find="$1"; shift local cmd="$*" local out if [ "$VERBOSE" = "1" ]; then echo "COMMAND: ${cmd} 2>&1 | grep -q '${find}'" fi out=$($cmd 2>&1 | grep -q "${find}" 2>&1) return $? } run_cmd_grep() { run_cmd_grep_common "$@" rc=$? check_err $rc return $rc } run_cmd_grep_fail() { run_cmd_grep_common "$@" rc=$? check_fail $rc return $rc } end_test() { echo "$*" [ "${VERBOSE}" = "1" ] && echo if [[ $ret -ne 0 ]] && [[ "${PAUSE_ON_FAIL}" = "yes" ]]; then echo "Hit enter to continue" read a fi; if [ "${PAUSE}" = "yes" ]; then echo "Hit enter to continue" read a fi } kci_add_dummy() { run_cmd ip link add name "$devdummy" type dummy run_cmd ip link set "$devdummy" up } kci_del_dummy() { run_cmd ip link del dev "$devdummy" } kci_test_netconf() { dev="$1" r=$ret run_cmd ip netconf show dev "$dev" for f in 4 6; do run_cmd ip -$f netconf show dev "$dev" done if [ $ret -ne 0 ] ;then end_test "FAIL: ip netconf show $dev" test $r -eq 0 && ret=0 return 1 fi } # add a bridge with vlans on top kci_test_bridge() { devbr="test-br0" vlandev="testbr-vlan1" local ret=0 run_cmd ip link add name "$devbr" type bridge run_cmd ip link set dev "$devdummy" master "$devbr" run_cmd ip link set "$devbr" up run_cmd ip link add link "$devbr" name "$vlandev" type vlan id 1 run_cmd ip addr add dev "$vlandev" 10.200.7.23/30 run_cmd ip -6 addr add dev "$vlandev" dead:42::1234/64 run_cmd ip -d link run_cmd ip r s t all for name in "$devbr" "$vlandev" "$devdummy" ; do kci_test_netconf "$name" done run_cmd ip -6 addr del dev "$vlandev" dead:42::1234/64 run_cmd ip link del dev "$vlandev" run_cmd ip link del dev "$devbr" if [ $ret -ne 0 ];then end_test "FAIL: bridge setup" return 1 fi end_test "PASS: bridge setup" } kci_test_gre() { gredev=neta rem=10.42.42.1 loc=10.0.0.1 local ret=0 run_cmd ip tunnel add $gredev mode gre remote $rem local $loc ttl 1 run_cmd ip link set $gredev up run_cmd ip addr add 10.23.7.10 dev $gredev run_cmd ip route add 10.23.8.0/30 dev $gredev run_cmd ip addr add dev "$devdummy" 10.23.7.11/24 run_cmd ip link run_cmd ip addr kci_test_netconf "$gredev" run_cmd ip addr del dev "$devdummy" 10.23.7.11/24 run_cmd ip link del $gredev if [ $ret -ne 0 ];then end_test "FAIL: gre tunnel endpoint" return 1 fi end_test "PASS: gre tunnel endpoint" } # tc uses rtnetlink too, for full tc testing # please see tools/testing/selftests/tc-testing. kci_test_tc() { dev=lo local ret=0 run_cmd tc qdisc add dev "$dev" root handle 1: htb run_cmd tc class add dev "$dev" parent 1: classid 1:10 htb rate 1mbit run_cmd tc filter add dev "$dev" parent 1:0 prio 5 handle ffe: protocol ip u32 divisor 256 run_cmd tc filter add dev "$dev" parent 1:0 prio 5 handle ffd: protocol ip u32 divisor 256 run_cmd tc filter add dev "$dev" parent 1:0 prio 5 handle ffc: protocol ip u32 divisor 256 run_cmd tc filter add dev "$dev" protocol ip parent 1: prio 5 handle ffe:2:3 u32 ht ffe:2: match ip src 10.0.0.3 flowid 1:10 run_cmd tc filter add dev "$dev" protocol ip parent 1: prio 5 handle ffe:2:2 u32 ht ffe:2: match ip src 10.0.0.2 flowid 1:10 run_cmd tc filter show dev "$dev" parent 1:0 run_cmd tc filter del dev "$dev" protocol ip parent 1: prio 5 handle ffe:2:3 u32 run_cmd tc filter show dev "$dev" parent 1:0 run_cmd tc qdisc del dev "$dev" root handle 1: htb if [ $ret -ne 0 ];then end_test "FAIL: tc htb hierarchy" return 1 fi end_test "PASS: tc htb hierarchy" } kci_test_polrouting() { local ret=0 run_cmd ip rule add fwmark 1 lookup 100 run_cmd ip route add local 0.0.0.0/0 dev lo table 100 run_cmd ip r s t all run_cmd ip rule del fwmark 1 lookup 100 run_cmd ip route del local 0.0.0.0/0 dev lo table 100 if [ $ret -ne 0 ];then end_test "FAIL: policy route test" return 1 fi end_test "PASS: policy routing" } kci_test_route_get() { local hash_policy=$(sysctl -n net.ipv4.fib_multipath_hash_policy) local ret=0 run_cmd ip route get 127.0.0.1 run_cmd ip route get 127.0.0.1 dev "$devdummy" run_cmd ip route get ::1 run_cmd ip route get fe80::1 dev "$devdummy" run_cmd ip route get 127.0.0.1 from 127.0.0.1 oif lo tos 0x10 mark 0x1 run_cmd ip route get ::1 from ::1 iif lo oif lo tos 0x10 mark 0x1 run_cmd ip addr add dev "$devdummy" 10.23.7.11/24 run_cmd ip route get 10.23.7.11 from 10.23.7.12 iif "$devdummy" run_cmd ip route add 10.23.8.0/24 \ nexthop via 10.23.7.13 dev "$devdummy" \ nexthop via 10.23.7.14 dev "$devdummy" sysctl -wq net.ipv4.fib_multipath_hash_policy=0 run_cmd ip route get 10.23.8.11 sysctl -wq net.ipv4.fib_multipath_hash_policy=1 run_cmd ip route get 10.23.8.11 sysctl -wq net.ipv4.fib_multipath_hash_policy="$hash_policy" run_cmd ip route del 10.23.8.0/24 run_cmd ip addr del dev "$devdummy" 10.23.7.11/24 if [ $ret -ne 0 ];then end_test "FAIL: route get" return 1 fi end_test "PASS: route get" } kci_test_addrlft() { for i in $(seq 10 100) ;do lft=$(((RANDOM%3) + 1)) run_cmd ip addr add 10.23.11.$i/32 dev "$devdummy" preferred_lft $lft valid_lft $((lft+1)) done sleep 5 run_cmd_grep_fail "10.23.11." ip addr show dev "$devdummy" if [ $? -eq 0 ]; then check_err 1 end_test "FAIL: preferred_lft addresses remaining" return fi end_test "PASS: preferred_lft addresses have expired" } kci_test_promote_secondaries() { promote=$(sysctl -n net.ipv4.conf.$devdummy.promote_secondaries) sysctl -q net.ipv4.conf.$devdummy.promote_secondaries=1 for i in $(seq 2 254);do IP="10.23.11.$i" ip -f inet addr add $IP/16 brd + dev "$devdummy" ifconfig "$devdummy" $IP netmask 255.255.0.0 done ip addr flush dev "$devdummy" [ $promote -eq 0 ] && sysctl -q net.ipv4.conf.$devdummy.promote_secondaries=0 end_test "PASS: promote_secondaries complete" } kci_test_addrlabel() { local ret=0 run_cmd ip addrlabel add prefix dead::/64 dev lo label 1 run_cmd_grep "prefix dead::/64 dev lo label 1" ip addrlabel list run_cmd ip addrlabel del prefix dead::/64 dev lo label 1 run_cmd ip addrlabel add prefix dead::/64 label 1 run_cmd ip addrlabel del prefix dead::/64 label 1 # concurrent add/delete for i in $(seq 1 1000); do ip addrlabel add prefix 1c3::/64 label 12345 2>/dev/null done & for i in $(seq 1 1000); do ip addrlabel del prefix 1c3::/64 label 12345 2>/dev/null done wait ip addrlabel del prefix 1c3::/64 label 12345 2>/dev/null if [ $ret -ne 0 ];then end_test "FAIL: ipv6 addrlabel" return 1 fi end_test "PASS: ipv6 addrlabel" } kci_test_ifalias() { local ret=0 namewant=$(uuidgen) syspathname="/sys/class/net/$devdummy/ifalias" run_cmd ip link set dev "$devdummy" alias "$namewant" if [ $ret -ne 0 ]; then end_test "FAIL: cannot set interface alias of $devdummy to $namewant" return 1 fi run_cmd_grep "alias $namewant" ip link show "$devdummy" if [ -r "$syspathname" ] ; then read namehave < "$syspathname" if [ "$namewant" != "$namehave" ]; then end_test "FAIL: did set ifalias $namewant but got $namehave" return 1 fi namewant=$(uuidgen) echo "$namewant" > "$syspathname" run_cmd_grep "alias $namewant" ip link show "$devdummy" # sysfs interface allows to delete alias again echo "" > "$syspathname" run_cmd_grep_fail "alias $namewant" ip link show "$devdummy" for i in $(seq 1 100); do uuidgen > "$syspathname" & done wait # re-add the alias -- kernel should free mem when dummy dev is removed run_cmd ip link set dev "$devdummy" alias "$namewant" fi if [ $ret -ne 0 ]; then end_test "FAIL: set interface alias $devdummy to $namewant" return 1 fi end_test "PASS: set ifalias $namewant for $devdummy" } kci_test_vrf() { vrfname="test-vrf" local ret=0 run_cmd ip link show type vrf if [ $? -ne 0 ]; then end_test "SKIP: vrf: iproute2 too old" return $ksft_skip fi run_cmd ip link add "$vrfname" type vrf table 10 if [ $ret -ne 0 ];then end_test "FAIL: can't add vrf interface, skipping test" return 0 fi run_cmd_grep "$vrfname" ip -br link show type vrf if [ $ret -ne 0 ];then end_test "FAIL: created vrf device not found" return 1 fi run_cmd ip link set dev "$vrfname" up run_cmd ip link set dev "$devdummy" master "$vrfname" run_cmd ip link del dev "$vrfname" if [ $ret -ne 0 ];then end_test "FAIL: vrf" return 1 fi end_test "PASS: vrf" } kci_test_encap_vxlan() { local ret=0 vxlan="test-vxlan0" vlan="test-vlan0" run_cmd ip -netns "$testns" link add "$vxlan" type vxlan id 42 group 239.1.1.1 \ dev "$devdummy" dstport 4789 if [ $? -ne 0 ]; then end_test "FAIL: can't add vxlan interface, skipping test" return 0 fi run_cmd ip -netns "$testns" addr add 10.2.11.49/24 dev "$vxlan" run_cmd ip -netns "$testns" link set up dev "$vxlan" run_cmd ip -netns "$testns" link add link "$vxlan" name "$vlan" type vlan id 1 # changelink testcases run_cmd_fail ip -netns "$testns" link set dev "$vxlan" type vxlan vni 43 run_cmd_fail ip -netns "$testns" link set dev "$vxlan" type vxlan group ffe5::5 dev "$devdummy" run_cmd_fail ip -netns "$testns" link set dev "$vxlan" type vxlan ttl inherit run_cmd ip -netns "$testns" link set dev "$vxlan" type vxlan ttl 64 run_cmd ip -netns "$testns" link set dev "$vxlan" type vxlan nolearning run_cmd_fail ip -netns "$testns" link set dev "$vxlan" type vxlan proxy run_cmd_fail ip -netns "$testns" link set dev "$vxlan" type vxlan norsc run_cmd_fail ip -netns "$testns" link set dev "$vxlan" type vxlan l2miss run_cmd_fail ip -netns "$testns" link set dev "$vxlan" type vxlan l3miss run_cmd_fail ip -netns "$testns" link set dev "$vxlan" type vxlan external run_cmd_fail ip -netns "$testns" link set dev "$vxlan" type vxlan udpcsum run_cmd_fail ip -netns "$testns" link set dev "$vxlan" type vxlan udp6zerocsumtx run_cmd_fail ip -netns "$testns" link set dev "$vxlan" type vxlan udp6zerocsumrx run_cmd_fail ip -netns "$testns" link set dev "$vxlan" type vxlan remcsumtx run_cmd_fail ip -netns "$testns" link set dev "$vxlan" type vxlan remcsumrx run_cmd_fail ip -netns "$testns" link set dev "$vxlan" type vxlan gbp run_cmd_fail ip -netns "$testns" link set dev "$vxlan" type vxlan gpe run_cmd ip -netns "$testns" link del "$vxlan" if [ $ret -ne 0 ]; then end_test "FAIL: vxlan" return 1 fi end_test "PASS: vxlan" } kci_test_encap_fou() { local ret=0 name="test-fou" run_cmd_grep 'Usage: ip fou' ip fou help if [ $? -ne 0 ];then end_test "SKIP: fou: iproute2 too old" return $ksft_skip fi if ! /sbin/modprobe -q -n fou; then end_test "SKIP: module fou is not found" return $ksft_skip fi /sbin/modprobe -q fou run_cmd ip -netns "$testns" fou add port 7777 ipproto 47 if [ $? -ne 0 ];then end_test "FAIL: can't add fou port 7777, skipping test" return 1 fi run_cmd ip -netns "$testns" fou add port 8888 ipproto 4 run_cmd_fail ip -netns "$testns" fou del port 9999 run_cmd ip -netns "$testns" fou del port 7777 if [ $ret -ne 0 ]; then end_test "FAIL: fou"s return 1 fi end_test "PASS: fou" } # test various encap methods, use netns to avoid unwanted interference kci_test_encap() { local ret=0 setup_ns testns if [ $? -ne 0 ]; then end_test "SKIP encap tests: cannot add net namespace $testns" return $ksft_skip fi run_cmd ip -netns "$testns" link set lo up run_cmd ip -netns "$testns" link add name "$devdummy" type dummy run_cmd ip -netns "$testns" link set "$devdummy" up run_cmd kci_test_encap_vxlan run_cmd kci_test_encap_fou ip netns del "$testns" return $ret } kci_test_macsec() { msname="test_macsec0" local ret=0 run_cmd_grep "^Usage: ip macsec" ip macsec help if [ $? -ne 0 ]; then end_test "SKIP: macsec: iproute2 too old" return $ksft_skip fi run_cmd ip link add link "$devdummy" "$msname" type macsec port 42 encrypt on if [ $ret -ne 0 ];then end_test "FAIL: can't add macsec interface, skipping test" return 1 fi run_cmd ip macsec add "$msname" tx sa 0 pn 1024 on key 01 12345678901234567890123456789012 run_cmd ip macsec add "$msname" rx port 1234 address "1c:ed:de:ad:be:ef" run_cmd ip macsec add "$msname" rx port 1234 address "1c:ed:de:ad:be:ef" sa 0 pn 1 on key 00 0123456789abcdef0123456789abcdef run_cmd ip macsec show run_cmd ip link del dev "$msname" if [ $ret -ne 0 ];then end_test "FAIL: macsec" return 1 fi end_test "PASS: macsec" } kci_test_macsec_offload() { sysfsd=/sys/kernel/debug/netdevsim/netdevsim0/ports/0/ sysfsnet=/sys/bus/netdevsim/devices/netdevsim0/net/ probed=false local ret=0 run_cmd_grep "^Usage: ip macsec" ip macsec help if [ $? -ne 0 ]; then end_test "SKIP: macsec: iproute2 too old" return $ksft_skip fi if ! mount | grep -q debugfs; then mount -t debugfs none /sys/kernel/debug/ &> /dev/null fi # setup netdevsim since dummydev doesn't have offload support if [ ! -w /sys/bus/netdevsim/new_device ] ; then run_cmd modprobe -q netdevsim if [ $ret -ne 0 ]; then end_test "SKIP: macsec_offload can't load netdevsim" return $ksft_skip fi probed=true fi echo "0" > /sys/bus/netdevsim/new_device while [ ! -d $sysfsnet ] ; do :; done udevadm settle dev=`ls $sysfsnet` ip link set $dev up if [ ! -d $sysfsd ] ; then end_test "FAIL: macsec_offload can't create device $dev" return 1 fi run_cmd_grep 'macsec-hw-offload: on' ethtool -k $dev if [ $? -eq 1 ] ; then end_test "FAIL: macsec_offload netdevsim doesn't support MACsec offload" return 1 fi run_cmd ip link add link $dev kci_macsec1 type macsec port 4 offload mac run_cmd ip link add link $dev kci_macsec2 type macsec address "aa:bb:cc:dd:ee:ff" port 5 offload mac run_cmd ip link add link $dev kci_macsec3 type macsec sci abbacdde01020304 offload mac run_cmd_fail ip link add link $dev kci_macsec4 type macsec port 8 offload mac msname=kci_macsec1 run_cmd ip macsec add "$msname" tx sa 0 pn 1024 on key 01 12345678901234567890123456789012 run_cmd ip macsec add "$msname" rx port 1234 address "1c:ed:de:ad:be:ef" run_cmd ip macsec add "$msname" rx port 1234 address "1c:ed:de:ad:be:ef" sa 0 pn 1 on \ key 00 0123456789abcdef0123456789abcdef run_cmd_fail ip macsec add "$msname" rx port 1235 address "1c:ed:de:ad:be:ef" # clean up any leftovers for msdev in kci_macsec{1,2,3,4} ; do ip link del $msdev 2> /dev/null done echo 0 > /sys/bus/netdevsim/del_device $probed && rmmod netdevsim if [ $ret -ne 0 ]; then end_test "FAIL: macsec_offload" return 1 fi end_test "PASS: macsec_offload" } #------------------------------------------------------------------- # Example commands # ip x s add proto esp src 14.0.0.52 dst 14.0.0.70 \ # spi 0x07 mode transport reqid 0x07 replay-window 32 \ # aead 'rfc4106(gcm(aes))' 1234567890123456dcba 128 \ # sel src 14.0.0.52/24 dst 14.0.0.70/24 # ip x p add dir out src 14.0.0.52/24 dst 14.0.0.70/24 \ # tmpl proto esp src 14.0.0.52 dst 14.0.0.70 \ # spi 0x07 mode transport reqid 0x07 # # Subcommands not tested # ip x s update # ip x s allocspi # ip x s deleteall # ip x p update # ip x p deleteall # ip x p set #------------------------------------------------------------------- kci_test_ipsec() { local ret=0 algo="aead rfc4106(gcm(aes)) 0x3132333435363738393031323334353664636261 128" srcip=192.168.123.1 dstip=192.168.123.2 spi=7 ip addr add $srcip dev $devdummy # flush to be sure there's nothing configured run_cmd ip x s flush ; ip x p flush # start the monitor in the background tmpfile=`mktemp /var/run/ipsectestXXX` mpid=`(ip x m > $tmpfile & echo $!) 2>/dev/null` sleep 0.2 ipsecid="proto esp src $srcip dst $dstip spi 0x07" run_cmd ip x s add $ipsecid \ mode transport reqid 0x07 replay-window 32 \ $algo sel src $srcip/24 dst $dstip/24 lines=`ip x s list | grep $srcip | grep $dstip | wc -l` run_cmd test $lines -eq 2 run_cmd_grep "SAD count 1" ip x s count lines=`ip x s get $ipsecid | grep $srcip | grep $dstip | wc -l` run_cmd test $lines -eq 2 run_cmd ip x s delete $ipsecid lines=`ip x s list | wc -l` run_cmd test $lines -eq 0 ipsecsel="dir out src $srcip/24 dst $dstip/24" run_cmd ip x p add $ipsecsel \ tmpl proto esp src $srcip dst $dstip \ spi 0x07 mode transport reqid 0x07 lines=`ip x p list | grep $srcip | grep $dstip | wc -l` run_cmd test $lines -eq 2 run_cmd_grep "SPD IN 0 OUT 1 FWD 0" ip x p count lines=`ip x p get $ipsecsel | grep $srcip | grep $dstip | wc -l` run_cmd test $lines -eq 2 run_cmd ip x p delete $ipsecsel lines=`ip x p list | wc -l` run_cmd test $lines -eq 0 # check the monitor results kill $mpid lines=`wc -l $tmpfile | cut "-d " -f1` run_cmd test $lines -eq 20 rm -rf $tmpfile # clean up any leftovers run_cmd ip x s flush run_cmd ip x p flush ip addr del $srcip/32 dev $devdummy if [ $ret -ne 0 ]; then end_test "FAIL: ipsec" return 1 fi end_test "PASS: ipsec" } #------------------------------------------------------------------- # Example commands # ip x s add proto esp src 14.0.0.52 dst 14.0.0.70 \ # spi 0x07 mode transport reqid 0x07 replay-window 32 \ # aead 'rfc4106(gcm(aes))' 1234567890123456dcba 128 \ # sel src 14.0.0.52/24 dst 14.0.0.70/24 # offload dev sim1 dir out # ip x p add dir out src 14.0.0.52/24 dst 14.0.0.70/24 \ # tmpl proto esp src 14.0.0.52 dst 14.0.0.70 \ # spi 0x07 mode transport reqid 0x07 # #------------------------------------------------------------------- kci_test_ipsec_offload() { local ret=0 algo="aead rfc4106(gcm(aes)) 0x3132333435363738393031323334353664636261 128" srcip=192.168.123.3 dstip=192.168.123.4 sysfsd=/sys/kernel/debug/netdevsim/netdevsim0/ports/0/ sysfsf=$sysfsd/ipsec sysfsnet=/sys/bus/netdevsim/devices/netdevsim0/net/ probed=false if ! mount | grep -q debugfs; then mount -t debugfs none /sys/kernel/debug/ &> /dev/null fi # setup netdevsim since dummydev doesn't have offload support if [ ! -w /sys/bus/netdevsim/new_device ] ; then run_cmd modprobe -q netdevsim if [ $ret -ne 0 ]; then end_test "SKIP: ipsec_offload can't load netdevsim" return $ksft_skip fi probed=true fi echo "0" > /sys/bus/netdevsim/new_device while [ ! -d $sysfsnet ] ; do :; done udevadm settle dev=`ls $sysfsnet` ip addr add $srcip dev $dev ip link set $dev up if [ ! -d $sysfsd ] ; then end_test "FAIL: ipsec_offload can't create device $dev" return 1 fi if [ ! -f $sysfsf ] ; then end_test "FAIL: ipsec_offload netdevsim doesn't support IPsec offload" return 1 fi # flush to be sure there's nothing configured ip x s flush ; ip x p flush # create offloaded SAs, both in and out run_cmd ip x p add dir out src $srcip/24 dst $dstip/24 \ tmpl proto esp src $srcip dst $dstip spi 9 \ mode transport reqid 42 run_cmd ip x p add dir in src $dstip/24 dst $srcip/24 \ tmpl proto esp src $dstip dst $srcip spi 9 \ mode transport reqid 42 run_cmd ip x s add proto esp src $srcip dst $dstip spi 9 \ mode transport reqid 42 $algo sel src $srcip/24 dst $dstip/24 \ offload dev $dev dir out run_cmd ip x s add proto esp src $dstip dst $srcip spi 9 \ mode transport reqid 42 $algo sel src $dstip/24 dst $srcip/24 \ offload dev $dev dir in if [ $ret -ne 0 ]; then end_test "FAIL: ipsec_offload can't create SA" return 1 fi # does offload show up in ip output lines=`ip x s list | grep -c "crypto offload parameters: dev $dev dir"` if [ $lines -ne 2 ] ; then check_err 1 end_test "FAIL: ipsec_offload SA offload missing from list output" fi # use ping to exercise the Tx path ping -I $dev -c 3 -W 1 -i 0 $dstip >/dev/null # does driver have correct offload info run_cmd diff $sysfsf - << EOF SA count=2 tx=3 sa[0] tx ipaddr=0x00000000 00000000 00000000 00000000 sa[0] spi=0x00000009 proto=0x32 salt=0x61626364 crypt=1 sa[0] key=0x34333231 38373635 32313039 36353433 sa[1] rx ipaddr=0x00000000 00000000 00000000 037ba8c0 sa[1] spi=0x00000009 proto=0x32 salt=0x61626364 crypt=1 sa[1] key=0x34333231 38373635 32313039 36353433 EOF if [ $? -ne 0 ] ; then end_test "FAIL: ipsec_offload incorrect driver data" check_err 1 fi # does offload get removed from driver ip x s flush ip x p flush lines=`grep -c "SA count=0" $sysfsf` if [ $lines -ne 1 ] ; then check_err 1 end_test "FAIL: ipsec_offload SA not removed from driver" fi # clean up any leftovers echo 0 > /sys/bus/netdevsim/del_device $probed && rmmod netdevsim if [ $ret -ne 0 ]; then end_test "FAIL: ipsec_offload" return 1 fi end_test "PASS: ipsec_offload" } kci_test_gretap() { DEV_NS=gretap00 local ret=0 setup_ns testns if [ $? -ne 0 ]; then end_test "SKIP gretap tests: cannot add net namespace $testns" return $ksft_skip fi run_cmd_grep "^Usage:" ip link help gretap if [ $? -ne 0 ];then end_test "SKIP: gretap: iproute2 too old" ip netns del "$testns" return $ksft_skip fi # test native tunnel run_cmd ip -netns "$testns" link add dev "$DEV_NS" type gretap seq \ key 102 local 172.16.1.100 remote 172.16.1.200 run_cmd ip -netns "$testns" addr add dev "$DEV_NS" 10.1.1.100/24 run_cmd ip -netns "$testns" link set dev $DEV_NS up run_cmd ip -netns "$testns" link del "$DEV_NS" # test external mode run_cmd ip -netns "$testns" link add dev "$DEV_NS" type gretap external run_cmd ip -netns "$testns" link del "$DEV_NS" if [ $ret -ne 0 ]; then end_test "FAIL: gretap" ip netns del "$testns" return 1 fi end_test "PASS: gretap" ip netns del "$testns" } kci_test_ip6gretap() { DEV_NS=ip6gretap00 local ret=0 setup_ns testns if [ $? -ne 0 ]; then end_test "SKIP ip6gretap tests: cannot add net namespace $testns" return $ksft_skip fi run_cmd_grep "^Usage:" ip link help ip6gretap if [ $? -ne 0 ];then end_test "SKIP: ip6gretap: iproute2 too old" ip netns del "$testns" return $ksft_skip fi # test native tunnel run_cmd ip -netns "$testns" link add dev "$DEV_NS" type ip6gretap seq \ key 102 local fc00:100::1 remote fc00:100::2 run_cmd ip -netns "$testns" addr add dev "$DEV_NS" fc00:200::1/96 run_cmd ip -netns "$testns" link set dev $DEV_NS up run_cmd ip -netns "$testns" link del "$DEV_NS" # test external mode run_cmd ip -netns "$testns" link add dev "$DEV_NS" type ip6gretap external run_cmd ip -netns "$testns" link del "$DEV_NS" if [ $ret -ne 0 ]; then end_test "FAIL: ip6gretap" ip netns del "$testns" return 1 fi end_test "PASS: ip6gretap" ip netns del "$testns" } kci_test_erspan() { DEV_NS=erspan00 local ret=0 run_cmd_grep "^Usage:" ip link help erspan if [ $? -ne 0 ];then end_test "SKIP: erspan: iproute2 too old" return $ksft_skip fi setup_ns testns if [ $? -ne 0 ]; then end_test "SKIP erspan tests: cannot add net namespace $testns" return $ksft_skip fi # test native tunnel erspan v1 run_cmd ip -netns "$testns" link add dev "$DEV_NS" type erspan seq \ key 102 local 172.16.1.100 remote 172.16.1.200 \ erspan_ver 1 erspan 488 run_cmd ip -netns "$testns" addr add dev "$DEV_NS" 10.1.1.100/24 run_cmd ip -netns "$testns" link set dev $DEV_NS up run_cmd ip -netns "$testns" link del "$DEV_NS" # test native tunnel erspan v2 run_cmd ip -netns "$testns" link add dev "$DEV_NS" type erspan seq \ key 102 local 172.16.1.100 remote 172.16.1.200 \ erspan_ver 2 erspan_dir ingress erspan_hwid 7 run_cmd ip -netns "$testns" addr add dev "$DEV_NS" 10.1.1.100/24 run_cmd ip -netns "$testns" link set dev $DEV_NS up run_cmd ip -netns "$testns" link del "$DEV_NS" # test external mode run_cmd ip -netns "$testns" link add dev "$DEV_NS" type erspan external run_cmd ip -netns "$testns" link del "$DEV_NS" if [ $ret -ne 0 ]; then end_test "FAIL: erspan" ip netns del "$testns" return 1 fi end_test "PASS: erspan" ip netns del "$testns" } kci_test_ip6erspan() { DEV_NS=ip6erspan00 local ret=0 run_cmd_grep "^Usage:" ip link help ip6erspan if [ $? -ne 0 ];then end_test "SKIP: ip6erspan: iproute2 too old" return $ksft_skip fi setup_ns testns if [ $? -ne 0 ]; then end_test "SKIP ip6erspan tests: cannot add net namespace $testns" return $ksft_skip fi # test native tunnel ip6erspan v1 run_cmd ip -netns "$testns" link add dev "$DEV_NS" type ip6erspan seq \ key 102 local fc00:100::1 remote fc00:100::2 \ erspan_ver 1 erspan 488 run_cmd ip -netns "$testns" addr add dev "$DEV_NS" 10.1.1.100/24 run_cmd ip -netns "$testns" link set dev $DEV_NS up run_cmd ip -netns "$testns" link del "$DEV_NS" # test native tunnel ip6erspan v2 run_cmd ip -netns "$testns" link add dev "$DEV_NS" type ip6erspan seq \ key 102 local fc00:100::1 remote fc00:100::2 \ erspan_ver 2 erspan_dir ingress erspan_hwid 7 run_cmd ip -netns "$testns" addr add dev "$DEV_NS" 10.1.1.100/24 run_cmd ip -netns "$testns" link set dev $DEV_NS up run_cmd ip -netns "$testns" link del "$DEV_NS" # test external mode run_cmd ip -netns "$testns" link add dev "$DEV_NS" \ type ip6erspan external run_cmd ip -netns "$testns" link del "$DEV_NS" if [ $ret -ne 0 ]; then end_test "FAIL: ip6erspan" ip netns del "$testns" return 1 fi end_test "PASS: ip6erspan" ip netns del "$testns" } kci_test_fdb_get() { brdev="test-br0" vxlandev="vxlan10" test_mac=de:ad:be:ef:13:37 localip="10.0.2.2" dstip="10.0.2.3" local ret=0 run_cmd_grep 'bridge fdb get' bridge fdb help if [ $? -ne 0 ];then end_test "SKIP: fdb get tests: iproute2 too old" return $ksft_skip fi setup_ns testns if [ $? -ne 0 ]; then end_test "SKIP fdb get tests: cannot add net namespace $testns" return $ksft_skip fi IP="ip -netns $testns" BRIDGE="bridge -netns $testns" run_cmd $IP link add "$vxlandev" type vxlan id 10 local $localip \ dstport 4789 run_cmd $IP link add name "$brdev" type bridge run_cmd $IP link set dev "$vxlandev" master "$brdev" run_cmd $BRIDGE fdb add $test_mac dev "$vxlandev" master run_cmd $BRIDGE fdb add $test_mac dev "$vxlandev" dst $dstip self run_cmd_grep "dev $vxlandev master $brdev" $BRIDGE fdb get $test_mac brport "$vxlandev" run_cmd_grep "dev $vxlandev master $brdev" $BRIDGE fdb get $test_mac br "$brdev" run_cmd_grep "dev $vxlandev dst $dstip" $BRIDGE fdb get $test_mac dev "$vxlandev" self ip netns del $testns &>/dev/null if [ $ret -ne 0 ]; then end_test "FAIL: bridge fdb get" return 1 fi end_test "PASS: bridge fdb get" } kci_test_neigh_get() { dstmac=de:ad:be:ef:13:37 dstip=10.0.2.4 dstip6=dead::2 local ret=0 run_cmd_grep 'ip neigh get' ip neigh help if [ $? -ne 0 ];then end_test "SKIP: fdb get tests: iproute2 too old" return $ksft_skip fi # ipv4 run_cmd ip neigh add $dstip lladdr $dstmac dev "$devdummy" run_cmd_grep "$dstmac" ip neigh get $dstip dev "$devdummy" run_cmd ip neigh del $dstip lladdr $dstmac dev "$devdummy" # ipv4 proxy run_cmd ip neigh add proxy $dstip dev "$devdummy" run_cmd_grep "$dstip" ip neigh get proxy $dstip dev "$devdummy" run_cmd ip neigh del proxy $dstip dev "$devdummy" # ipv6 run_cmd ip neigh add $dstip6 lladdr $dstmac dev "$devdummy" run_cmd_grep "$dstmac" ip neigh get $dstip6 dev "$devdummy" run_cmd ip neigh del $dstip6 lladdr $dstmac dev "$devdummy" # ipv6 proxy run_cmd ip neigh add proxy $dstip6 dev "$devdummy" run_cmd_grep "$dstip6" ip neigh get proxy $dstip6 dev "$devdummy" run_cmd ip neigh del proxy $dstip6 dev "$devdummy" if [ $ret -ne 0 ];then end_test "FAIL: neigh get" return 1 fi end_test "PASS: neigh get" } kci_test_bridge_parent_id() { local ret=0 sysfsnet=/sys/bus/netdevsim/devices/netdevsim probed=false if [ ! -w /sys/bus/netdevsim/new_device ] ; then run_cmd modprobe -q netdevsim if [ $ret -ne 0 ]; then end_test "SKIP: bridge_parent_id can't load netdevsim" return $ksft_skip fi probed=true fi echo "10 1" > /sys/bus/netdevsim/new_device while [ ! -d ${sysfsnet}10 ] ; do :; done echo "20 1" > /sys/bus/netdevsim/new_device while [ ! -d ${sysfsnet}20 ] ; do :; done udevadm settle dev10=`ls ${sysfsnet}10/net/` dev20=`ls ${sysfsnet}20/net/` run_cmd ip link add name test-bond0 type bond mode 802.3ad run_cmd ip link set dev $dev10 master test-bond0 run_cmd ip link set dev $dev20 master test-bond0 run_cmd ip link add name test-br0 type bridge run_cmd ip link set dev test-bond0 master test-br0 # clean up any leftovers ip link del dev test-br0 ip link del dev test-bond0 echo 20 > /sys/bus/netdevsim/del_device echo 10 > /sys/bus/netdevsim/del_device $probed && rmmod netdevsim if [ $ret -ne 0 ]; then end_test "FAIL: bridge_parent_id" return 1 fi end_test "PASS: bridge_parent_id" } address_get_proto() { local addr=$1; shift ip -N -j address show dev "$devdummy" | jq -e -r --arg addr "${addr%/*}" \ '.[].addr_info[] | select(.local == $addr) | .protocol' } address_count() { ip -N -j address show dev "$devdummy" "$@" | jq -e -r '[.[].addr_info[] | .local | select(. != null)] | length' } do_test_address_proto() { local what=$1; shift local addr=$1; shift local addr2=${addr%/*}2/${addr#*/} local addr3=${addr%/*}3/${addr#*/} local proto local count local ret=0 local err ip address add dev "$devdummy" "$addr3" check_err $? proto=$(address_get_proto "$addr3") [[ "$proto" == null ]] check_err $? ip address add dev "$devdummy" "$addr2" proto 0x99 check_err $? proto=$(address_get_proto "$addr2") [[ "$proto" == 0x99 ]] check_err $? ip address add dev "$devdummy" "$addr" proto 0xab check_err $? proto=$(address_get_proto "$addr") [[ "$proto" == 0xab ]] check_err $? ip address replace dev "$devdummy" "$addr" proto 0x11 proto=$(address_get_proto "$addr") check_err $? [[ "$proto" == 0x11 ]] check_err $? count=$(address_count) check_err $? (( count >= 3 )) # $addr, $addr2 and $addr3 plus any kernel addresses check_err $? count=$(address_count proto 0) check_err $? (( count == 1 )) # just $addr3 check_err $? count=$(address_count proto 0x11) check_err $? (( count == 2 )) # $addr and $addr3 check_err $? count=$(address_count proto 0xab) check_err $? (( count == 1 )) # just $addr3 check_err $? ip address del dev "$devdummy" "$addr" ip address del dev "$devdummy" "$addr2" ip address del dev "$devdummy" "$addr3" if [ $ret -ne 0 ]; then end_test "FAIL: address proto $what" return 1 fi end_test "PASS: address proto $what" } kci_test_address_proto() { local ret=0 do_test_address_proto IPv4 192.0.2.1/28 check_err $? do_test_address_proto IPv6 2001:db8:1::1/64 check_err $? return $ret } kci_test_enslave_bonding() { local bond="bond123" local ret=0 setup_ns testns if [ $? -ne 0 ]; then end_test "SKIP bonding tests: cannot add net namespace $testns" return $ksft_skip fi run_cmd ip -netns $testns link add dev $bond type bond mode balance-rr run_cmd ip -netns $testns link add dev $devdummy type dummy run_cmd ip -netns $testns link set dev $devdummy up run_cmd ip -netns $testns link set dev $devdummy master $bond down if [ $ret -ne 0 ]; then end_test "FAIL: initially up interface added to a bond and set down" ip netns del "$testns" return 1 fi end_test "PASS: enslave interface in a bond" ip netns del "$testns" } kci_test_rtnl() { local current_test local ret=0 kci_add_dummy if [ $ret -ne 0 ];then end_test "FAIL: cannot add dummy interface" return 1 fi for current_test in ${TESTS:-$ALL_TESTS}; do $current_test check_err $? done kci_del_dummy return $ret } usage() { cat < Test(s) to run (default: all) (options: $(echo $ALL_TESTS)) -v Verbose mode (show commands and output) -P Pause after every test -p Pause after every failing test before cleanup (for debugging) EOF } #check for needed privileges if [ "$(id -u)" -ne 0 ];then end_test "SKIP: Need root privileges" exit $ksft_skip fi for x in ip tc;do $x -Version 2>/dev/null >/dev/null if [ $? -ne 0 ];then end_test "SKIP: Could not run test without the $x tool" exit $ksft_skip fi done while getopts t:hvpP o; do case $o in t) TESTS=$OPTARG;; v) VERBOSE=1;; p) PAUSE_ON_FAIL=yes;; P) PAUSE=yes;; h) usage; exit 0;; *) usage; exit 1;; esac done [ $PAUSE = "yes" ] && PAUSE_ON_FAIL="no" kci_test_rtnl exit $?