summaryrefslogtreecommitdiff
path: root/Documentation/ABI/testing/sysfs-bus-iio-light-lm3533-als
blob: 22c5ea6709719abc3759d2f25aa5d384d03f4ba0 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
What:		/sys/.../events/in_illuminance0_thresh_either_en
Date:		April 2012
KernelVersion:	3.5
Contact:	Johan Hovold <jhovold@gmail.com>
Description:
		Event generated when channel passes one of the four thresholds
		in each direction (rising|falling) and a zone change occurs.
		The corresponding light zone can be read from
		in_illuminance0_zone.

What:		/sys/.../events/in_illuminance0_threshY_hysteresis
Date:		May 2012
KernelVersion:	3.5
Contact:	Johan Hovold <jhovold@gmail.com>
Description:
		Get the hysteresis for thresholds Y, that is,
		threshY_hysteresis = threshY_raising - threshY_falling

What:		/sys/.../events/illuminance_threshY_falling_value
What:		/sys/.../events/illuminance_threshY_raising_value
Date:		April 2012
KernelVersion:	3.5
Contact:	Johan Hovold <jhovold@gmail.com>
Description:
		Specifies the value of threshold that the device is comparing
		against for the events enabled by
		in_illuminance0_thresh_either_en (0..255), where Y in 0..3.

		Note that threshY_falling must be less than or equal to
		threshY_raising.

		These thresholds correspond to the eight zone-boundary
		registers (boundaryY_{low,high}) and define the five light
		zones.

What:		/sys/bus/iio/devices/iio:deviceX/in_illuminance0_zone
Date:		April 2012
KernelVersion:	3.5
Contact:	Johan Hovold <jhovold@gmail.com>
Description:
		Get the current light zone (0..4) as defined by the
		in_illuminance0_threshY_{falling,rising} thresholds.

What:		/sys/bus/iio/devices/iio:deviceX/out_currentY_raw
Date:		May 2012
KernelVersion:	3.5
Contact:	Johan Hovold <jhovold@gmail.com>
Description:
		Get output current for channel Y (0..255), that is,
		out_currentY_currentZ_raw, where Z is the current zone.

What:		/sys/bus/iio/devices/iio:deviceX/out_currentY_currentZ_raw
Date:		May 2012
KernelVersion:	3.5
Contact:	Johan Hovold <jhovold@gmail.com>
Description:
		Set the output current for channel out_currentY when in zone
		Z (0..255), where Y in 0..2 and Z in 0..4.

		These values correspond to the ALS-mapper target registers for
		ALS-mapper Y + 1.