summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/iio/dac/adi,ad5758.yaml
blob: 4e508bfcc9d87e46e5c5fb3c561304fba2acba41 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/iio/dac/adi,ad5758.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Analog Devices AD5758 DAC

maintainers:
  - Michael Hennerich <Michael.Hennerich@analog.com>

properties:
  compatible:
    const: adi,ad5758

  reg:
    maxItems: 1

  spi-cpha: true

  adi,dc-dc-mode:
    $ref: /schemas/types.yaml#/definitions/uint32
    enum: [1, 2, 3]
    description: |
      Mode of operation of the dc-to-dc converter
      Dynamic Power Control (DPC)
      In this mode, the AD5758 circuitry senses the output voltage and
      dynamically regulates the supply voltage, VDPC+, to meet compliance
      requirements plus an optimized headroom voltage for the output buffer.

      Programmable Power Control (PPC)
      In this mode, the VDPC+ voltage is user-programmable to a fixed level
      that needs to accommodate the maximum output load required.

      The output of the DAC core is either converted to a current or
      voltage output at the VIOUT pin. Only one mode can be enabled at
      any one time.

      The following values are currently supported:
      * 1: DPC current mode
      * 2: DPC voltage mode
      * 3: PPC current mode

      Depending on the selected output mode (voltage or current) one of the
      two properties must be present:

  adi,range-microvolt:
    description: |
      Voltage output range specified as <minimum, maximum>
    oneOf:
      - items:
          - const: 0
          - enum: [5000000, 10000000]
      - items:
          - const: -5000000
          - const: 5000000
      - items:
          - const: -10000000
          - const: 10000000

  adi,range-microamp:
    description: |
      Current output range specified as <minimum, maximum>
    oneOf:
      - items:
          - const: 0
          - enum: [20000, 24000]
      - items:
          - const: 4
          - const: 24000
      - items:
          - const: -20000
          - const: 20000
      - items:
          - const: -24000
          - const: 24000
      - items:
          - const: -1000
          - const: 22000

  reset-gpios: true

  adi,dc-dc-ilim-microamp:
    enum: [150000, 200000, 250000, 300000, 350000, 400000]
    description: |
      The dc-to-dc converter current limit.

  adi,slew-time-us:
    description: |
      The time it takes for the output to reach the full scale [uS]
    minimum: 133
    maximum: 1023984375

required:
  - compatible
  - reg
  - spi-cpha
  - adi,dc-dc-mode

allOf:
  - $ref: /schemas/spi/spi-peripheral-props.yaml#
  - if:
      properties:
        adi,dc-dc-mode:
          enum: [1, 3]
    then:
      properties:
        adi,range-microvolt: false
      required:
        - adi,range-microamp
    else:
      properties:
        adi,range-microamp: false
      required:
        - adi,range-microvolt

unevaluatedProperties: false

examples:
  - |
    spi {
        #address-cells = <1>;
        #size-cells = <0>;

        dac@0 {
            compatible = "adi,ad5758";
            reg = <0>;
            spi-max-frequency = <1000000>;
            spi-cpha;

            reset-gpios = <&gpio 22 0>;

            adi,dc-dc-mode = <2>;
            adi,range-microvolt = <0 10000000>;
            adi,dc-dc-ilim-microamp = <200000>;
            adi,slew-time-us = <125000>;
        };
    };
...