summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/pinctrl/fsl,imx8mn-pinctrl.txt
blob: 330716c971b99508878b5b575018f8132d182407 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
* Freescale IMX8MN IOMUX Controller

Please refer to fsl,imx-pinctrl.txt and pinctrl-bindings.txt in this directory
for common binding part and usage.

Required properties:
- compatible: "fsl,imx8mn-iomuxc"
- reg: should contain the base physical address and size of the iomuxc
  registers.

Required properties in sub-nodes:
- fsl,pins: each entry consists of 6 integers and represents the mux and config
  setting for one pin.  The first 5 integers <mux_reg conf_reg input_reg mux_val
  input_val> are specified using a PIN_FUNC_ID macro, which can be found in
  <arch/arm64/boot/dts/freescale/imx8mn-pinfunc.h>. The last integer CONFIG is
  the pad setting value like pull-up on this pin. Please refer to i.MX8M Nano
  Reference Manual for detailed CONFIG settings.

Examples:

&uart1 {
       pinctrl-names = "default";
       pinctrl-0 = <&pinctrl_uart1>;
};

iomuxc: pinctrl@30330000 {
        compatible = "fsl,imx8mn-iomuxc";
        reg = <0x0 0x30330000 0x0 0x10000>;

        pinctrl_uart1: uart1grp {
                fsl,pins = <
			MX8MN_IOMUXC_UART1_RXD_UART1_DCE_RX	0x140
			MX8MN_IOMUXC_UART1_TXD_UART1_DCE_TX	0x140
			MX8MN_IOMUXC_UART3_RXD_UART1_DCE_CTS_B	0x140
			MX8MN_IOMUXC_UART3_TXD_UART1_DCE_RTS_B	0x140
			MX8MN_IOMUXC_SD1_DATA4_GPIO2_IO6	0x19
                >;
        };
};