1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
|
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/power/supply/qcom,pm8916-bms-vm.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Qualcomm Voltage Mode BMS
maintainers:
- Nikita Travkin <nikita@trvn.ru>
description:
Voltage Mode BMS is a hardware block found in some Qualcomm PMICs
such as pm8916. This block performs battery voltage monitoring.
allOf:
- $ref: power-supply.yaml#
properties:
compatible:
const: qcom,pm8916-bms-vm
reg:
maxItems: 1
interrupts:
items:
- description: BMS FSM left S3 mode
- description: BMS FSM entered S2 mode
- description: OCV measured in S3 mode
- description: OCV below threshold
- description: FIFO update done
- description: BMS FSM switched state
interrupt-names:
items:
- const: cv_leave
- const: cv_enter
- const: ocv_good
- const: ocv_thr
- const: fifo
- const: state_chg
monitored-battery: true
power-supplies: true
required:
- compatible
- reg
- interrupts
- interrupt-names
- monitored-battery
additionalProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
pmic {
#address-cells = <1>;
#size-cells = <0>;
battery@4000 {
compatible = "qcom,pm8916-bms-vm";
reg = <0x4000>;
interrupts = <0x0 0x40 0 IRQ_TYPE_EDGE_RISING>,
<0x0 0x40 1 IRQ_TYPE_EDGE_RISING>,
<0x0 0x40 2 IRQ_TYPE_EDGE_RISING>,
<0x0 0x40 3 IRQ_TYPE_EDGE_RISING>,
<0x0 0x40 4 IRQ_TYPE_EDGE_RISING>,
<0x0 0x40 5 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "cv_leave",
"cv_enter",
"ocv_good",
"ocv_thr",
"fifo",
"state_chg";
monitored-battery = <&battery>;
power-supplies = <&pm8916_charger>;
};
};
|
