1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
|
/*
* Device Tree file for D-Link DIR-685 Xtreme N Storage Router
*/
/dts-v1/;
#include "gemini.dtsi"
#include <dt-bindings/input/input.h>
/ {
model = "D-Link DIR-685 Xtreme N Storage Router";
compatible = "dlink,dir-685", "cortina,gemini";
#address-cells = <1>;
#size-cells = <1>;
memory {
/* 128 MB SDRAM in 2 x Hynix HY5DU121622DTP-D43 */
device_type = "memory";
reg = <0x00000000 0x8000000>;
};
chosen {
stdout-path = "uart0:115200n8";
};
gpio_keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
button-esc {
debounce_interval = <50>;
wakeup-source;
linux,code = <KEY_ESC>;
label = "reset";
gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
};
button-eject {
debounce_interval = <50>;
wakeup-source;
linux,code = <KEY_EJECTCD>;
label = "unmount";
gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
};
};
leds {
compatible = "gpio-leds";
led-wps {
label = "dir685:blue:WPS";
gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
default-state = "on";
linux,default-trigger = "heartbeat";
};
/*
* These two LEDs are on the side of the device.
* For electrical reasons, both LEDs cannot be active
* at the same time so only blue or orange can on at
* one time. Enabling both makes the LED go dark.
* The LEDs both sit inside the unmount button and the
* label on the case says "unmount".
*/
led-blue-hd {
label = "dir685:blue:HD";
gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
led-orange-hd {
label = "dir685:orange:HD";
gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
};
/*
* This is a Sunon Maglev GM0502PFV2-8 cooling fan @10000 RPM.
* Since the platform has no temperature sensor, this is controlled
* from userspace by using the hard disks S.M.A.R.T. temperature
* sensor. It is turned on when the temperature exceeds 46 degrees
* and turned off when the temperatures goes below 41 degrees
* (celsius).
*/
gpio-fan {
compatible = "gpio-fan";
gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
gpio-fan,speed-map = <0 0>, <10000 1>;
#cooling-cells = <2>;
};
/*
* The touchpad input is connected to a GPIO bit-banged
* I2C bus.
*/
gpio-i2c {
compatible = "i2c-gpio";
gpios = <&gpio0 5 0>, /* SDA */
<&gpio0 6 0>; /* SCL */
#address-cells = <1>;
#size-cells = <0>;
touchkeys@26 {
compatible = "dlink,dir685-touchkeys";
reg = <0x26>;
interrupt-parent = <&gpio0>;
interrupts = <17 IRQ_TYPE_EDGE_FALLING>;
};
};
soc {
flash@30000000 {
status = "okay";
/* 32MB of flash */
reg = <0x30000000 0x02000000>;
/*
* This "RedBoot" is the Storlink derivative.
*/
partition@0 {
label = "RedBoot";
reg = <0x00000000 0x00040000>;
read-only;
};
/*
* Between the boot loader and the rootfs is the kernel
* in a custom Storlink format flashed from the boot
* menu. The rootfs is in squashfs format.
*/
partition@1800c0 {
label = "rootfs";
reg = <0x001800c0 0x01dbff40>;
read-only;
};
partition@1f40000 {
label = "upgrade";
reg = <0x01f40000 0x00040000>;
read-only;
};
partition@1f80000 {
label = "rgdb";
reg = <0x01f80000 0x00040000>;
read-only;
};
/*
* This partition contains MAC addresses for WAN,
* WLAN and LAN, and the country code (for wireless
* I guess).
*/
partition@1fc0000 {
label = "nvram";
reg = <0x01fc0000 0x00020000>;
read-only;
};
partition@1fe0000 {
label = "LangPack";
reg = <0x01fe0000 0x00020000>;
read-only;
};
};
sata: sata@46000000 {
cortina,gemini-ata-muxmode = <0>;
cortina,gemini-enable-sata-bridge;
status = "okay";
};
pci@50000000 {
status = "okay";
interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map =
<0x4800 0 0 1 &pci_intc 0>, /* Slot 9 */
<0x4800 0 0 2 &pci_intc 1>,
<0x4800 0 0 3 &pci_intc 2>,
<0x4800 0 0 4 &pci_intc 3>,
<0x5000 0 0 1 &pci_intc 1>, /* Slot 10 */
<0x5000 0 0 2 &pci_intc 2>,
<0x5000 0 0 3 &pci_intc 3>,
<0x5000 0 0 4 &pci_intc 0>,
<0x5800 0 0 1 &pci_intc 2>, /* Slot 11 */
<0x5800 0 0 2 &pci_intc 3>,
<0x5800 0 0 3 &pci_intc 0>,
<0x5800 0 0 4 &pci_intc 1>,
<0x6000 0 0 1 &pci_intc 3>, /* Slot 12 */
<0x6000 0 0 2 &pci_intc 0>,
<0x6000 0 0 3 &pci_intc 1>,
<0x6000 0 0 4 &pci_intc 2>;
};
ata@63000000 {
status = "okay";
};
};
};
|
