summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/imx6ul-kontron-n6310-som.dtsi
blob: a896b2348dd2fd457ddd489b4424d17cdb5c1963 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
// SPDX-License-Identifier: GPL-2.0
/*
 * Copyright (C) 2017 exceet electronics GmbH
 * Copyright (C) 2018 Kontron Electronics GmbH
 * Copyright (c) 2019 Krzysztof Kozlowski <krzk@kernel.org>
 */

#include "imx6ul.dtsi"
#include <dt-bindings/gpio/gpio.h>

/ {
	model = "Kontron N6310 SOM";
	compatible = "kontron,imx6ul-n6310-som", "fsl,imx6ul";

	memory@80000000 {
		reg = <0x80000000 0x10000000>;
		device_type = "memory";
	};
};

&ecspi2 {
	cs-gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_ecspi2>;
	status = "okay";

	spi-flash@0 {
		compatible = "mxicy,mx25v8035f", "jedec,spi-nor";
		spi-max-frequency = <50000000>;
		reg = <0>;
	};
};

&fec1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_enet1 &pinctrl_enet1_mdio>;
	phy-mode = "rmii";
	phy-handle = <&ethphy1>;
	status = "okay";

	mdio {
		#address-cells = <1>;
		#size-cells = <0>;

		ethphy1: ethernet-phy@1 {
			reg = <1>;
			micrel,led-mode = <0>;
			clocks = <&clks IMX6UL_CLK_ENET_REF>;
			clock-names = "rmii-ref";
		};
	};
};

&fec2 {
	phy-mode = "rmii";
	status = "disabled";
};

&qspi {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_qspi>;
	status = "okay";

	spi-flash@0 {
		#address-cells = <1>;
		#size-cells = <1>;
		compatible = "spi-nand";
		spi-max-frequency = <108000000>;
		spi-tx-bus-width = <4>;
		spi-rx-bus-width = <4>;
		reg = <0>;

		partition@0 {
			label = "ubi1";
			reg = <0x00000000 0x08000000>;
		};

		partition@8000000 {
			label = "ubi2";
			reg = <0x08000000 0x08000000>;
		};
	};
};

&iomuxc {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_reset_out>;

	pinctrl_ecspi2: ecspi2grp {
		fsl,pins = <
			MX6UL_PAD_CSI_DATA03__ECSPI2_MISO      0x100b1
			MX6UL_PAD_CSI_DATA02__ECSPI2_MOSI      0x100b1
			MX6UL_PAD_CSI_DATA00__ECSPI2_SCLK      0x100b1
			MX6UL_PAD_CSI_DATA01__GPIO4_IO22       0x100b1
		>;
	};

	pinctrl_enet1: enet1grp {
		fsl,pins = <
			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN      0x1b0b0
			MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER      0x1b0b0
			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0
			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0
			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN      0x1b0b0
			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0
			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0
			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1  0x4001b009
		>;
	};

	pinctrl_enet1_mdio: enet1mdiogrp {
		fsl,pins = <
			MX6UL_PAD_GPIO1_IO07__ENET1_MDC         0x1b0b0
			MX6UL_PAD_GPIO1_IO06__ENET1_MDIO        0x1b0b0
		>;
	};

	pinctrl_qspi: qspigrp {
		fsl,pins = <
			MX6UL_PAD_NAND_WP_B__QSPI_A_SCLK        0x70a1
			MX6UL_PAD_NAND_READY_B__QSPI_A_DATA00   0x70a1
			MX6UL_PAD_NAND_CE0_B__QSPI_A_DATA01     0x70a1
			MX6UL_PAD_NAND_CE1_B__QSPI_A_DATA02     0x70a1
			MX6UL_PAD_NAND_CLE__QSPI_A_DATA03       0x70a1
			MX6UL_PAD_NAND_DQS__QSPI_A_SS0_B        0x70a1
		>;
	};

	pinctrl_reset_out: rstoutgrp {
		fsl,pins = <
			MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09      0x1b0b0
		>;
	};
};