summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/nxp/imx/imx53-sk-imx53.dts
blob: 103e73176e47d643d77cb37c230261b2a0752d48 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
// SPDX-License-Identifier: GPL-2.0+
//
// Copyright 2023 Linaro Ltd.

/dts-v1/;

#include "imx53.dtsi"

/ {
	model = "StarterKit SK-iMX53 Board";
	compatible = "starterkit,sk-imx53", "fsl,imx53";

	aliases {
		/*
		 * iMX RTC is not battery powered on this board.
		 * Use the i2c RTC as rtc0.
		 */
		rtc0 = &rtc;
		rtc1 = &srtc;
	};

	chosen {
		stdout-path = &uart1;
	};

	memory@70000000 {
		device_type = "memory";
		/* v2 had only 256 MB, v3 has 512 MB */
		reg = <0x70000000 0x20000000>;
	};

	reg_usb1_vbus: regulator-usb-vbus {
		compatible = "regulator-fixed";
		regulator-name = "usb_vbus";
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
		gpio = <&gpio2 29 GPIO_ACTIVE_HIGH>;
		enable-active-high;
	};

	reg_usb_otg_vbus: regulator-otg-vbus {
		compatible = "regulator-fixed";
		regulator-name = "usb_vbus";
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
		gpio = <&gpio2 24 GPIO_ACTIVE_HIGH>;
		enable-active-high;
	};
};

&audmux {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_audmux>;
	status = "okay";
};

&can1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_can1>;
	status = "okay";
};

&ecspi1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_ecspi1>;
	cs-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
	status = "okay";
};

&ecspi2 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_ecspi2>;
	cs-gpios = <&gpio2 27 GPIO_ACTIVE_LOW>;
	status = "okay";
};

&esdhc1 {
	cd-gpios = <&gpio3 14 GPIO_ACTIVE_LOW>;
	fsl,wp-controller;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_esdhc1>;
	status = "okay";
};

&fec {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_fec>;
	phy-mode = "rmii";
	phy-handle = <&phy0>;
	mac-address = [000000000000]; /* placeholder; will be overwritten by bootloader */
	status = "okay";

	mdio {
		#address-cells = <1>;
		#size-cells = <0>;

		phy0: ethernet-phy@0 {
			reg = <0>;
			reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
		};
	};
};

&i2c1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_i2c1>;
	status = "okay";
};

&i2c2 {
	pinctrl-names = "default", "gpio";
	pinctrl-0 = <&pinctrl_i2c2>;
	pinctrl-1 = <&pinctrl_i2c2_gpio>;
	sda-gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>;
	scl-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>;
	status = "okay";

	tlv320aic23: codec@1a {
		compatible = "ti,tlv320aic23";
		reg = <0x1a>;
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_codec>;
		#sound-dai-cells = <0>;
	};

	rtc: rtc@68 {
		compatible = "dallas,ds1338";
		reg = <0x68>;
	};
};

&iomuxc {
	pinctrl_audmux: audmuxgrp {
		fsl,pins = <
			MX53_PAD_SD2_DATA3__AUDMUX_AUD4_TXC	0x1e4
			MX53_PAD_SD2_DATA2__AUDMUX_AUD4_TXD	0x1e4
			MX53_PAD_SD2_DATA1__AUDMUX_AUD4_TXFS	0x1e4
			MX53_PAD_SD2_DATA0__AUDMUX_AUD4_RXD	0x1e4
		>;
	};

	pinctrl_can1: can1grp {
		fsl,pins = <
			MX53_PAD_PATA_INTRQ__CAN1_TXCAN		0x1e4
			MX53_PAD_PATA_DIOR__CAN1_RXCAN		0x1e4
		>;
	};

	pinctrl_codec: codecgrp {
		fsl,pins = <
			MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK	0x1c4
		>;
	};

	pinctrl_ecspi1: ecspi1grp {
		fsl,pins = <
			MX53_PAD_EIM_D16__ECSPI1_SCLK		0x1e4
			MX53_PAD_EIM_D17__ECSPI1_MISO		0x1e4
			MX53_PAD_EIM_D18__ECSPI1_MOSI		0x1e4
		>;
	};

	pinctrl_ecspi2: ecspi2grp {
		fsl,pins = <
			MX53_PAD_CSI0_DAT9__ECSPI2_MOSI		0x1e4
			MX53_PAD_CSI0_DAT10__ECSPI2_MISO	0x1e4
			MX53_PAD_EIM_CS0__ECSPI2_SCLK		0x1e4
		>;
	};

	pinctrl_esdhc1: esdhc1grp {
		fsl,pins = <
			MX53_PAD_SD1_DATA0__ESDHC1_DAT0		0x1d5
			MX53_PAD_SD1_DATA1__ESDHC1_DAT1		0x1d5
			MX53_PAD_SD1_DATA2__ESDHC1_DAT2		0x1d5
			MX53_PAD_SD1_DATA3__ESDHC1_DAT3		0x1d5
			MX53_PAD_SD1_CMD__ESDHC1_CMD		0x1d5
			MX53_PAD_SD1_CLK__ESDHC1_CLK		0x1d5
			MX53_PAD_EIM_DA14__GPIO3_14		0x1f0
		>;
	};

	pinctrl_fec: fecgrp {
		fsl,pins = <
			MX53_PAD_FEC_MDC__FEC_MDC		0x1e4
			MX53_PAD_FEC_MDIO__FEC_MDIO		0x1e4
			MX53_PAD_FEC_REF_CLK__FEC_TX_CLK	0x1e4
			MX53_PAD_FEC_RX_ER__FEC_RX_ER		0x1e4
			MX53_PAD_FEC_CRS_DV__FEC_RX_DV		0x1e4
			MX53_PAD_FEC_RXD1__FEC_RDATA_1		0x1e4
			MX53_PAD_FEC_RXD0__FEC_RDATA_0		0x1e4
			MX53_PAD_FEC_TX_EN__FEC_TX_EN		0x1c4
			MX53_PAD_FEC_TXD1__FEC_TDATA_1		0x1e4
			MX53_PAD_FEC_TXD0__FEC_TDATA_0		0x1e4
			MX53_PAD_GPIO_1__GPIO1_1		0x1c4
		>;
	};

	pinctrl_i2c1: i2c1grp {
		fsl,pins = <
			MX53_PAD_EIM_D21__I2C1_SCL		0x400001e4
			MX53_PAD_EIM_D28__I2C1_SDA		0x400001e4
		>;
	};

	pinctrl_i2c2: i2c2grp {
		fsl,pins = <
			MX53_PAD_KEY_ROW3__I2C2_SDA             0x400001e4
			MX53_PAD_EIM_EB2__I2C2_SCL		0x400001e4
		>;
	};

	pinctrl_i2c2_gpio: i2c2gpiogrp {
		fsl,pins = <
			MX53_PAD_KEY_ROW3__GPIO4_13		0x1e4
			MX53_PAD_EIM_EB2__GPIO2_30		0x1e4
		>;
	};

	pinctrl_nand: nandgrp {
		fsl,pins = <
			MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B	0x4
			MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B	0x4
			MX53_PAD_NANDF_CLE__EMI_NANDF_CLE	0x4
			MX53_PAD_NANDF_ALE__EMI_NANDF_ALE	0x4
			MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B	0xe0
			MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0	0xe0
			MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0	0x4
			MX53_PAD_NANDF_CS1__EMI_NANDF_CS_1	0x4
			MX53_PAD_NANDF_CS2__EMI_NANDF_CS_2	0x4
			MX53_PAD_NANDF_CS3__EMI_NANDF_CS_3	0x4
			MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0	0xa4
			MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1	0xa4
			MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2	0xa4
			MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3	0xa4
			MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4	0xa4
			MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5	0xa4
			MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6	0xa4
			MX53_PAD_EIM_DA7__EMI_NAND_WEIM_DA_7	0xa4
		>;
	};

	pinctrl_pwm1: pwm1grp {
		fsl,pins = <
			MX53_PAD_GPIO_9__PWM1_PWMO		0x5
		>;
	};

	pinctrl_uart1: uart1grp {
		fsl,pins = <
			MX53_PAD_PATA_DIOW__UART1_TXD_MUX	0x1e4
			MX53_PAD_PATA_DMACK__UART1_RXD_MUX	0x1e4
		>;
	};

	pinctrl_uart3: uart3grp {
		fsl,pins = <
			MX53_PAD_EIM_D24__UART3_TXD_MUX		0x1e4
			MX53_PAD_EIM_D25__UART3_RXD_MUX		0x1e4
		>;
	};

	pinctrl_uart4: uart4grp {
		fsl,pins = <
			MX53_PAD_KEY_COL0__UART4_TXD_MUX	0x1e4
			MX53_PAD_KEY_ROW0__UART4_RXD_MUX	0x1e4
		>;
	};
};

&nfc {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_nand>;
	nand-bus-width = <8>;
	status = "okay";

	partitions {
		compatible = "fixed-partitions";
		#address-cells = <1>;
		#size-cells = <1>;

		partition@0 {
			label = "boot";
			reg = <0x00000000 0x00100000>;
			read-only;
		};

		partition@100000 {
			label = "u-boot";
			reg = <0x00100000 0x00100000>;
			read-only;
		};

		partition@200000 {
			label = "u-boot-env";
			reg = <0x00200000 0x00100000>;
			read-only;
		};

		partition@1000000 {
			label = "kernel-safe";
			reg = <0x01000000 0x00a00000>;
			read-only;
		};

		partition@1a00000 {
			label = "kernel";
			reg = <0x01a00000 0x005e0000>;
		};

		partition@2000000 {
			label = "ubifs";
			reg = <0x02000000 0x0e000000>;
		};
	};
};

&pwm1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_pwm1>;
	status = "okay";
};

&sata {
	status = "okay";
};

&uart1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_uart1>;
	status = "okay";
};

&uart3 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_uart3>;
	status = "okay";
};

&uart4 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_uart4>;
	status = "okay";
};

&usbh1 {
	vbus-supply = <&reg_usb1_vbus>;
	phy_type = "utmi";
	disable-over-current;
	status = "okay";
};

&usbotg {
	dr_mode = "peripheral";
	disable-over-current;
	status = "okay";
};