summaryrefslogtreecommitdiff
path: root/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
blob: 620495a43363928e926b76ff2e654e2aea15dd98 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
/*
 * Copyright (c) 2016 Andreas Färber
 *
 * Copyright (c) 2016 BayLibre, SAS.
 * Author: Neil Armstrong <narmstrong@baylibre.com>
 *
 * Copyright (c) 2016 Endless Computers, Inc.
 * Author: Carlo Caione <carlo@endlessm.com>
 *
 * This file is dual-licensed: you can use it either under the terms
 * of the GPL or the X11 license, at your option. Note that this dual
 * licensing only applies to this file, and not this project as a
 * whole.
 *
 *  a) This library is free software; you can redistribute it and/or
 *     modify it under the terms of the GNU General Public License as
 *     published by the Free Software Foundation; either version 2 of the
 *     License, or (at your option) any later version.
 *
 *     This library is distributed in the hope that it will be useful,
 *     but WITHOUT ANY WARRANTY; without even the implied warranty of
 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *     GNU General Public License for more details.
 *
 * Or, alternatively,
 *
 *  b) Permission is hereby granted, free of charge, to any person
 *     obtaining a copy of this software and associated documentation
 *     files (the "Software"), to deal in the Software without
 *     restriction, including without limitation the rights to use,
 *     copy, modify, merge, publish, distribute, sublicense, and/or
 *     sell copies of the Software, and to permit persons to whom the
 *     Software is furnished to do so, subject to the following
 *     conditions:
 *
 *     The above copyright notice and this permission notice shall be
 *     included in all copies or substantial portions of the Software.
 *
 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
 *     OTHER DEALINGS IN THE SOFTWARE.
 */

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>

/ {
	interrupt-parent = <&gic>;
	#address-cells = <2>;
	#size-cells = <2>;

	reserved-memory {
		#address-cells = <2>;
		#size-cells = <2>;
		ranges;

		/* 16 MiB reserved for Hardware ROM Firmware */
		hwrom_reserved: hwrom@0 {
			reg = <0x0 0x0 0x0 0x1000000>;
			no-map;
		};

		/* 2 MiB reserved for ARM Trusted Firmware (BL31) */
		secmon_reserved: secmon@10000000 {
			reg = <0x0 0x10000000 0x0 0x200000>;
			no-map;
		};
	};

	cpus {
		#address-cells = <0x2>;
		#size-cells = <0x0>;

		cpu0: cpu@0 {
			device_type = "cpu";
			compatible = "arm,cortex-a53", "arm,armv8";
			reg = <0x0 0x0>;
			enable-method = "psci";
			next-level-cache = <&l2>;
			clocks = <&scpi_dvfs 0>;
		};

		cpu1: cpu@1 {
			device_type = "cpu";
			compatible = "arm,cortex-a53", "arm,armv8";
			reg = <0x0 0x1>;
			enable-method = "psci";
			next-level-cache = <&l2>;
			clocks = <&scpi_dvfs 0>;
		};

		cpu2: cpu@2 {
			device_type = "cpu";
			compatible = "arm,cortex-a53", "arm,armv8";
			reg = <0x0 0x2>;
			enable-method = "psci";
			next-level-cache = <&l2>;
			clocks = <&scpi_dvfs 0>;
		};

		cpu3: cpu@3 {
			device_type = "cpu";
			compatible = "arm,cortex-a53", "arm,armv8";
			reg = <0x0 0x3>;
			enable-method = "psci";
			next-level-cache = <&l2>;
			clocks = <&scpi_dvfs 0>;
		};

		l2: l2-cache0 {
			compatible = "cache";
		};
	};

	arm-pmu {
		compatible = "arm,cortex-a53-pmu";
		interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
			     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
			     <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
			     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
	};

	psci {
		compatible = "arm,psci-0.2";
		method = "smc";
	};

	timer {
		compatible = "arm,armv8-timer";
		interrupts = <GIC_PPI 13
			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
			     <GIC_PPI 14
			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
			     <GIC_PPI 11
			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
			     <GIC_PPI 10
			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>;
	};

	xtal: xtal-clk {
		compatible = "fixed-clock";
		clock-frequency = <24000000>;
		clock-output-names = "xtal";
		#clock-cells = <0>;
	};

	firmware {
		sm: secure-monitor {
			compatible = "amlogic,meson-gx-sm", "amlogic,meson-gxbb-sm";
		};
	};

	efuse: efuse {
		compatible = "amlogic,meson-gx-efuse", "amlogic,meson-gxbb-efuse";
		#address-cells = <1>;
		#size-cells = <1>;

		sn: sn@14 {
			reg = <0x14 0x10>;
		};

		eth_mac: eth_mac@34 {
			reg = <0x34 0x10>;
		};

		bid: bid@46 {
			reg = <0x46 0x30>;
		};
	};

	scpi {
		compatible = "amlogic,meson-gxbb-scpi", "arm,scpi-pre-1.0";
		mboxes = <&mailbox 1 &mailbox 2>;
		shmem = <&cpu_scp_lpri &cpu_scp_hpri>;

		scpi_clocks: clocks {
			compatible = "arm,scpi-clocks";

			scpi_dvfs: scpi_clocks@0 {
				compatible = "arm,scpi-dvfs-clocks";
				#clock-cells = <1>;
				clock-indices = <0>;
				clock-output-names = "vcpu";
			};
		};

		scpi_sensors: sensors {
			compatible = "arm,scpi-sensors";
			#thermal-sensor-cells = <1>;
		};
	};

	soc {
		compatible = "simple-bus";
		#address-cells = <2>;
		#size-cells = <2>;
		ranges;

		cbus: cbus@c1100000 {
			compatible = "simple-bus";
			reg = <0x0 0xc1100000 0x0 0x100000>;
			#address-cells = <2>;
			#size-cells = <2>;
			ranges = <0x0 0x0 0x0 0xc1100000 0x0 0x100000>;

			reset: reset-controller@4404 {
				compatible = "amlogic,meson-gx-reset", "amlogic,meson-gxbb-reset";
				reg = <0x0 0x04404 0x0 0x20>;
				#reset-cells = <1>;
			};

			uart_A: serial@84c0 {
				compatible = "amlogic,meson-uart";
				reg = <0x0 0x84c0 0x0 0x14>;
				interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
				clocks = <&xtal>;
				status = "disabled";
			};

			uart_B: serial@84dc {
				compatible = "amlogic,meson-uart";
				reg = <0x0 0x84dc 0x0 0x14>;
				interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>;
				clocks = <&xtal>;
				status = "disabled";
			};

			i2c_A: i2c@8500 {
				compatible = "amlogic,meson-gxbb-i2c";
				reg = <0x0 0x08500 0x0 0x20>;
				interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>;
				#address-cells = <1>;
				#size-cells = <0>;
				status = "disabled";
			};

			pwm_ab: pwm@8550 {
				compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm";
				reg = <0x0 0x08550 0x0 0x10>;
				#pwm-cells = <3>;
				status = "disabled";
			};

			pwm_cd: pwm@8650 {
				compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm";
				reg = <0x0 0x08650 0x0 0x10>;
				#pwm-cells = <3>;
				status = "disabled";
			};

			saradc: adc@8680 {
				compatible = "amlogic,meson-saradc";
				reg = <0x0 0x8680 0x0 0x34>;
				#io-channel-cells = <1>;
				interrupts = <GIC_SPI 73 IRQ_TYPE_EDGE_RISING>;
				status = "disabled";
			};

			pwm_ef: pwm@86c0 {
				compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm";
				reg = <0x0 0x086c0 0x0 0x10>;
				#pwm-cells = <3>;
				status = "disabled";
			};

			uart_C: serial@8700 {
				compatible = "amlogic,meson-uart";
				reg = <0x0 0x8700 0x0 0x14>;
				interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>;
				clocks = <&xtal>;
				status = "disabled";
			};

			i2c_B: i2c@87c0 {
				compatible = "amlogic,meson-gxbb-i2c";
				reg = <0x0 0x087c0 0x0 0x20>;
				interrupts = <GIC_SPI 214 IRQ_TYPE_EDGE_RISING>;
				#address-cells = <1>;
				#size-cells = <0>;
				status = "disabled";
			};

			i2c_C: i2c@87e0 {
				compatible = "amlogic,meson-gxbb-i2c";
				reg = <0x0 0x087e0 0x0 0x20>;
				interrupts = <GIC_SPI 215 IRQ_TYPE_EDGE_RISING>;
				#address-cells = <1>;
				#size-cells = <0>;
				status = "disabled";
			};

			watchdog@98d0 {
				compatible = "amlogic,meson-gx-wdt", "amlogic,meson-gxbb-wdt";
				reg = <0x0 0x098d0 0x0 0x10>;
				clocks = <&xtal>;
			};
		};

		gic: interrupt-controller@c4301000 {
			compatible = "arm,gic-400";
			reg = <0x0 0xc4301000 0 0x1000>,
			      <0x0 0xc4302000 0 0x2000>,
			      <0x0 0xc4304000 0 0x2000>,
			      <0x0 0xc4306000 0 0x2000>;
			interrupt-controller;
			interrupts = <GIC_PPI 9
				(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
			#interrupt-cells = <3>;
			#address-cells = <0>;
		};

		sram: sram@c8000000 {
			compatible = "amlogic,meson-gxbb-sram", "mmio-sram";
			reg = <0x0 0xc8000000 0x0 0x14000>;

			#address-cells = <1>;
			#size-cells = <1>;
			ranges = <0 0x0 0xc8000000 0x14000>;

			cpu_scp_lpri: scp-shmem@0 {
				compatible = "amlogic,meson-gxbb-scp-shmem";
				reg = <0x13000 0x400>;
			};

			cpu_scp_hpri: scp-shmem@200 {
				compatible = "amlogic,meson-gxbb-scp-shmem";
				reg = <0x13400 0x400>;
			};
		};

		aobus: aobus@c8100000 {
			compatible = "simple-bus";
			reg = <0x0 0xc8100000 0x0 0x100000>;
			#address-cells = <2>;
			#size-cells = <2>;
			ranges = <0x0 0x0 0x0 0xc8100000 0x0 0x100000>;

			uart_AO: serial@4c0 {
				compatible = "amlogic,meson-uart";
				reg = <0x0 0x004c0 0x0 0x14>;
				interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>;
				clocks = <&xtal>;
				status = "disabled";
			};

			uart_AO_B: serial@4e0 {
				compatible = "amlogic,meson-uart";
				reg = <0x0 0x004e0 0x0 0x14>;
				interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>;
				clocks = <&xtal>;
				status = "disabled";
			};

			pwm_AO_ab: pwm@550 {
				compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm";
				reg = <0x0 0x00550 0x0 0x10>;
				#pwm-cells = <3>;
				status = "disabled";
			};

			ir: ir@580 {
				compatible = "amlogic,meson-gxbb-ir";
				reg = <0x0 0x00580 0x0 0x40>;
				interrupts = <GIC_SPI 196 IRQ_TYPE_EDGE_RISING>;
				status = "disabled";
			};
		};

		periphs: periphs@c8834000 {
			compatible = "simple-bus";
			reg = <0x0 0xc8834000 0x0 0x2000>;
			#address-cells = <2>;
			#size-cells = <2>;
			ranges = <0x0 0x0 0x0 0xc8834000 0x0 0x2000>;

			hwrng: rng {
				compatible = "amlogic,meson-rng";
				reg = <0x0 0x0 0x0 0x4>;
			};
		};


		hiubus: hiubus@c883c000 {
			compatible = "simple-bus";
			reg = <0x0 0xc883c000 0x0 0x2000>;
			#address-cells = <2>;
			#size-cells = <2>;
			ranges = <0x0 0x0 0x0 0xc883c000 0x0 0x2000>;

			mailbox: mailbox@404 {
				compatible = "amlogic,meson-gx-mhu", "amlogic,meson-gxbb-mhu";
				reg = <0 0x404 0 0x4c>;
				interrupts = <0 208 IRQ_TYPE_EDGE_RISING>,
					     <0 209 IRQ_TYPE_EDGE_RISING>,
					     <0 210 IRQ_TYPE_EDGE_RISING>;
				#mbox-cells = <1>;
			};
		};

		ethmac: ethernet@c9410000 {
			compatible = "amlogic,meson-gx-dwmac", "amlogic,meson-gxbb-dwmac", "snps,dwmac";
			reg = <0x0 0xc9410000 0x0 0x10000
			       0x0 0xc8834540 0x0 0x4>;
			interrupts = <0 8 1>;
			interrupt-names = "macirq";
			phy-mode = "rgmii";
			status = "disabled";
		};

		apb: apb@d0000000 {
			compatible = "simple-bus";
			reg = <0x0 0xd0000000 0x0 0x200000>;
			#address-cells = <2>;
			#size-cells = <2>;
			ranges = <0x0 0x0 0x0 0xd0000000 0x0 0x200000>;

			sd_emmc_a: mmc@70000 {
				compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc";
				reg = <0x0 0x70000 0x0 0x2000>;
				interrupts = <GIC_SPI 216 IRQ_TYPE_EDGE_RISING>;
				status = "disabled";
			};

			sd_emmc_b: mmc@72000 {
				compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc";
				reg = <0x0 0x72000 0x0 0x2000>;
				interrupts = <GIC_SPI 217 IRQ_TYPE_EDGE_RISING>;
				status = "disabled";
			};

			sd_emmc_c: mmc@74000 {
				compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc";
				reg = <0x0 0x74000 0x0 0x2000>;
				interrupts = <GIC_SPI 218 IRQ_TYPE_EDGE_RISING>;
				status = "disabled";
			};
		};

		vpu: vpu@d0100000 {
			compatible = "amlogic,meson-gx-vpu";
			reg = <0x0 0xd0100000 0x0 0x100000>,
			      <0x0 0xc883c000 0x0 0x1000>,
			      <0x0 0xc8838000 0x0 0x1000>;
			reg-names = "vpu", "hhi", "dmc";
			interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>;
			#address-cells = <1>;
			#size-cells = <0>;

			/* CVBS VDAC output port */
			cvbs_vdac_port: port@0 {
				reg = <0>;
			};
		};
	};
};