1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
|
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (c) 2021 Rockchip Electronics Co., Ltd.
*/
#include "rk3588s.dtsi"
#include "rk3588-pinctrl.dtsi"
/ {
pcie30_phy_grf: syscon@fd5b8000 {
compatible = "rockchip,rk3588-pcie3-phy-grf", "syscon";
reg = <0x0 0xfd5b8000 0x0 0x10000>;
};
pipe_phy1_grf: syscon@fd5c0000 {
compatible = "rockchip,rk3588-pipe-phy-grf", "syscon";
reg = <0x0 0xfd5c0000 0x0 0x100>;
};
i2s8_8ch: i2s@fddc8000 {
compatible = "rockchip,rk3588-i2s-tdm";
reg = <0x0 0xfddc8000 0x0 0x1000>;
interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH 0>;
clocks = <&cru MCLK_I2S8_8CH_TX>, <&cru MCLK_I2S8_8CH_TX>, <&cru HCLK_I2S8_8CH>;
clock-names = "mclk_tx", "mclk_rx", "hclk";
assigned-clocks = <&cru CLK_I2S8_8CH_TX_SRC>;
assigned-clock-parents = <&cru PLL_AUPLL>;
dmas = <&dmac2 22>;
dma-names = "tx";
power-domains = <&power RK3588_PD_VO0>;
resets = <&cru SRST_M_I2S8_8CH_TX>;
reset-names = "tx-m";
#sound-dai-cells = <0>;
status = "disabled";
};
i2s6_8ch: i2s@fddf4000 {
compatible = "rockchip,rk3588-i2s-tdm";
reg = <0x0 0xfddf4000 0x0 0x1000>;
interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH 0>;
clocks = <&cru MCLK_I2S6_8CH_TX>, <&cru MCLK_I2S6_8CH_TX>, <&cru HCLK_I2S6_8CH>;
clock-names = "mclk_tx", "mclk_rx", "hclk";
assigned-clocks = <&cru CLK_I2S6_8CH_TX_SRC>;
assigned-clock-parents = <&cru PLL_AUPLL>;
dmas = <&dmac2 4>;
dma-names = "tx";
power-domains = <&power RK3588_PD_VO1>;
resets = <&cru SRST_M_I2S6_8CH_TX>;
reset-names = "tx-m";
#sound-dai-cells = <0>;
status = "disabled";
};
i2s7_8ch: i2s@fddf8000 {
compatible = "rockchip,rk3588-i2s-tdm";
reg = <0x0 0xfddf8000 0x0 0x1000>;
interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH 0>;
clocks = <&cru MCLK_I2S7_8CH_RX>, <&cru MCLK_I2S7_8CH_RX>, <&cru HCLK_I2S7_8CH>;
clock-names = "mclk_tx", "mclk_rx", "hclk";
assigned-clocks = <&cru CLK_I2S7_8CH_RX_SRC>;
assigned-clock-parents = <&cru PLL_AUPLL>;
dmas = <&dmac2 21>;
dma-names = "rx";
power-domains = <&power RK3588_PD_VO1>;
resets = <&cru SRST_M_I2S7_8CH_RX>;
reset-names = "rx-m";
#sound-dai-cells = <0>;
status = "disabled";
};
i2s10_8ch: i2s@fde00000 {
compatible = "rockchip,rk3588-i2s-tdm";
reg = <0x0 0xfde00000 0x0 0x1000>;
interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH 0>;
clocks = <&cru MCLK_I2S10_8CH_RX>, <&cru MCLK_I2S10_8CH_RX>, <&cru HCLK_I2S10_8CH>;
clock-names = "mclk_tx", "mclk_rx", "hclk";
assigned-clocks = <&cru CLK_I2S10_8CH_RX_SRC>;
assigned-clock-parents = <&cru PLL_AUPLL>;
dmas = <&dmac2 24>;
dma-names = "rx";
power-domains = <&power RK3588_PD_VO1>;
resets = <&cru SRST_M_I2S10_8CH_RX>;
reset-names = "rx-m";
#sound-dai-cells = <0>;
status = "disabled";
};
pcie3x4: pcie@fe150000 {
compatible = "rockchip,rk3588-pcie", "rockchip,rk3568-pcie";
#address-cells = <3>;
#size-cells = <2>;
bus-range = <0x00 0x0f>;
clocks = <&cru ACLK_PCIE_4L_MSTR>, <&cru ACLK_PCIE_4L_SLV>,
<&cru ACLK_PCIE_4L_DBI>, <&cru PCLK_PCIE_4L>,
<&cru CLK_PCIE_AUX0>, <&cru CLK_PCIE4L_PIPE>;
clock-names = "aclk_mst", "aclk_slv",
"aclk_dbi", "pclk",
"aux", "pipe";
device_type = "pci";
interrupts = <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH 0>,
<GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH 0>,
<GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH 0>,
<GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH 0>,
<GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH 0>;
interrupt-names = "sys", "pmc", "msg", "legacy", "err";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 7>;
interrupt-map = <0 0 0 1 &pcie3x4_intc 0>,
<0 0 0 2 &pcie3x4_intc 1>,
<0 0 0 3 &pcie3x4_intc 2>,
<0 0 0 4 &pcie3x4_intc 3>;
linux,pci-domain = <0>;
max-link-speed = <3>;
msi-map = <0x0000 &its1 0x0000 0x1000>;
num-lanes = <4>;
phys = <&pcie30phy>;
phy-names = "pcie-phy";
power-domains = <&power RK3588_PD_PCIE>;
ranges = <0x01000000 0x0 0xf0100000 0x0 0xf0100000 0x0 0x00100000>,
<0x02000000 0x0 0xf0200000 0x0 0xf0200000 0x0 0x00e00000>,
<0x03000000 0x0 0x40000000 0x9 0x00000000 0x0 0x40000000>;
reg = <0xa 0x40000000 0x0 0x00400000>,
<0x0 0xfe150000 0x0 0x00010000>,
<0x0 0xf0000000 0x0 0x00100000>;
reg-names = "dbi", "apb", "config";
resets = <&cru SRST_PCIE0_POWER_UP>, <&cru SRST_P_PCIE0>;
reset-names = "pwr", "pipe";
status = "disabled";
pcie3x4_intc: legacy-interrupt-controller {
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <1>;
interrupt-parent = <&gic>;
interrupts = <GIC_SPI 260 IRQ_TYPE_EDGE_RISING 0>;
};
};
pcie3x2: pcie@fe160000 {
compatible = "rockchip,rk3588-pcie", "rockchip,rk3568-pcie";
#address-cells = <3>;
#size-cells = <2>;
bus-range = <0x10 0x1f>;
clocks = <&cru ACLK_PCIE_2L_MSTR>, <&cru ACLK_PCIE_2L_SLV>,
<&cru ACLK_PCIE_2L_DBI>, <&cru PCLK_PCIE_2L>,
<&cru CLK_PCIE_AUX1>, <&cru CLK_PCIE2L_PIPE>;
clock-names = "aclk_mst", "aclk_slv",
"aclk_dbi", "pclk",
"aux", "pipe";
device_type = "pci";
interrupts = <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH 0>,
<GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH 0>,
<GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH 0>,
<GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH 0>,
<GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH 0>;
interrupt-names = "sys", "pmc", "msg", "legacy", "err";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 7>;
interrupt-map = <0 0 0 1 &pcie3x2_intc 0>,
<0 0 0 2 &pcie3x2_intc 1>,
<0 0 0 3 &pcie3x2_intc 2>,
<0 0 0 4 &pcie3x2_intc 3>;
linux,pci-domain = <1>;
max-link-speed = <3>;
msi-map = <0x1000 &its1 0x1000 0x1000>;
num-lanes = <2>;
phys = <&pcie30phy>;
phy-names = "pcie-phy";
power-domains = <&power RK3588_PD_PCIE>;
ranges = <0x01000000 0x0 0xf1100000 0x0 0xf1100000 0x0 0x00100000>,
<0x02000000 0x0 0xf1200000 0x0 0xf1200000 0x0 0x00e00000>,
<0x03000000 0x0 0x40000000 0x9 0x40000000 0x0 0x40000000>;
reg = <0xa 0x40400000 0x0 0x00400000>,
<0x0 0xfe160000 0x0 0x00010000>,
<0x0 0xf1000000 0x0 0x00100000>;
reg-names = "dbi", "apb", "config";
resets = <&cru SRST_PCIE1_POWER_UP>, <&cru SRST_P_PCIE1>;
reset-names = "pwr", "pipe";
status = "disabled";
pcie3x2_intc: legacy-interrupt-controller {
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <1>;
interrupt-parent = <&gic>;
interrupts = <GIC_SPI 255 IRQ_TYPE_EDGE_RISING 0>;
};
};
pcie2x1l0: pcie@fe170000 {
compatible = "rockchip,rk3588-pcie", "rockchip,rk3568-pcie";
bus-range = <0x20 0x2f>;
clocks = <&cru ACLK_PCIE_1L0_MSTR>, <&cru ACLK_PCIE_1L0_SLV>,
<&cru ACLK_PCIE_1L0_DBI>, <&cru PCLK_PCIE_1L0>,
<&cru CLK_PCIE_AUX2>, <&cru CLK_PCIE1L0_PIPE>;
clock-names = "aclk_mst", "aclk_slv",
"aclk_dbi", "pclk",
"aux", "pipe";
device_type = "pci";
interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH 0>,
<GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH 0>,
<GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH 0>,
<GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH 0>,
<GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH 0>;
interrupt-names = "sys", "pmc", "msg", "legacy", "err";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 7>;
interrupt-map = <0 0 0 1 &pcie2x1l0_intc 0>,
<0 0 0 2 &pcie2x1l0_intc 1>,
<0 0 0 3 &pcie2x1l0_intc 2>,
<0 0 0 4 &pcie2x1l0_intc 3>;
linux,pci-domain = <2>;
max-link-speed = <2>;
msi-map = <0x2000 &its0 0x2000 0x1000>;
num-lanes = <1>;
phys = <&combphy1_ps PHY_TYPE_PCIE>;
phy-names = "pcie-phy";
power-domains = <&power RK3588_PD_PCIE>;
ranges = <0x01000000 0x0 0xf2100000 0x0 0xf2100000 0x0 0x00100000>,
<0x02000000 0x0 0xf2200000 0x0 0xf2200000 0x0 0x00e00000>,
<0x03000000 0x0 0x40000000 0x9 0x80000000 0x0 0x40000000>;
reg = <0xa 0x40800000 0x0 0x00400000>,
<0x0 0xfe170000 0x0 0x00010000>,
<0x0 0xf2000000 0x0 0x00100000>;
reg-names = "dbi", "apb", "config";
resets = <&cru SRST_PCIE2_POWER_UP>, <&cru SRST_P_PCIE2>;
reset-names = "pwr", "pipe";
#address-cells = <3>;
#size-cells = <2>;
status = "disabled";
pcie2x1l0_intc: legacy-interrupt-controller {
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <1>;
interrupt-parent = <&gic>;
interrupts = <GIC_SPI 240 IRQ_TYPE_EDGE_RISING 0>;
};
};
gmac0: ethernet@fe1b0000 {
compatible = "rockchip,rk3588-gmac", "snps,dwmac-4.20a";
reg = <0x0 0xfe1b0000 0x0 0x10000>;
interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH 0>,
<GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH 0>;
interrupt-names = "macirq", "eth_wake_irq";
clocks = <&cru CLK_GMAC_125M>, <&cru CLK_GMAC_50M>,
<&cru PCLK_GMAC0>, <&cru ACLK_GMAC0>,
<&cru CLK_GMAC0_PTP_REF>;
clock-names = "stmmaceth", "clk_mac_ref",
"pclk_mac", "aclk_mac",
"ptp_ref";
power-domains = <&power RK3588_PD_GMAC>;
resets = <&cru SRST_A_GMAC0>;
reset-names = "stmmaceth";
rockchip,grf = <&sys_grf>;
rockchip,php-grf = <&php_grf>;
snps,axi-config = <&gmac0_stmmac_axi_setup>;
snps,mixed-burst;
snps,mtl-rx-config = <&gmac0_mtl_rx_setup>;
snps,mtl-tx-config = <&gmac0_mtl_tx_setup>;
snps,tso;
status = "disabled";
mdio0: mdio {
compatible = "snps,dwmac-mdio";
#address-cells = <0x1>;
#size-cells = <0x0>;
};
gmac0_stmmac_axi_setup: stmmac-axi-config {
snps,blen = <0 0 0 0 16 8 4>;
snps,wr_osr_lmt = <4>;
snps,rd_osr_lmt = <8>;
};
gmac0_mtl_rx_setup: rx-queues-config {
snps,rx-queues-to-use = <2>;
queue0 {};
queue1 {};
};
gmac0_mtl_tx_setup: tx-queues-config {
snps,tx-queues-to-use = <2>;
queue0 {};
queue1 {};
};
};
sata1: sata@fe220000 {
compatible = "rockchip,rk3588-dwc-ahci", "snps,dwc-ahci";
reg = <0 0xfe220000 0 0x1000>;
interrupts = <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH 0>;
clocks = <&cru ACLK_SATA1>, <&cru CLK_PMALIVE1>,
<&cru CLK_RXOOB1>, <&cru CLK_PIPEPHY1_REF>,
<&cru CLK_PIPEPHY1_PIPE_ASIC_G>;
clock-names = "sata", "pmalive", "rxoob", "ref", "asic";
ports-implemented = <0x1>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
sata-port@0 {
reg = <0>;
hba-port-cap = <HBA_PORT_FBSCP>;
phys = <&combphy1_ps PHY_TYPE_SATA>;
phy-names = "sata-phy";
snps,rx-ts-max = <32>;
snps,tx-ts-max = <32>;
};
};
combphy1_ps: phy@fee10000 {
compatible = "rockchip,rk3588-naneng-combphy";
reg = <0x0 0xfee10000 0x0 0x100>;
clocks = <&cru CLK_REF_PIPE_PHY1>, <&cru PCLK_PCIE_COMBO_PIPE_PHY1>,
<&cru PCLK_PHP_ROOT>;
clock-names = "ref", "apb", "pipe";
assigned-clocks = <&cru CLK_REF_PIPE_PHY1>;
assigned-clock-rates = <100000000>;
#phy-cells = <1>;
resets = <&cru SRST_REF_PIPE_PHY1>, <&cru SRST_P_PCIE2_PHY1>;
reset-names = "phy", "apb";
rockchip,pipe-grf = <&php_grf>;
rockchip,pipe-phy-grf = <&pipe_phy1_grf>;
status = "disabled";
};
pcie30phy: phy@fee80000 {
compatible = "rockchip,rk3588-pcie3-phy";
reg = <0x0 0xfee80000 0x0 0x20000>;
#phy-cells = <0>;
clocks = <&cru PCLK_PCIE_COMBO_PIPE_PHY>;
clock-names = "pclk";
resets = <&cru SRST_PCIE30_PHY>;
reset-names = "phy";
rockchip,pipe-grf = <&php_grf>;
rockchip,phy-grf = <&pcie30_phy_grf>;
status = "disabled";
};
};
|
