summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/panel/panel-sitronix-st7701.c
blob: 4b4f2558e3b47b16524df5bd46f6efeecdfdd50d (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
// SPDX-License-Identifier: GPL-2.0+
/*
 * Copyright (C) 2019, Amarula Solutions.
 * Author: Jagan Teki <jagan@amarulasolutions.com>
 */

#include <drm/drm_mipi_dsi.h>
#include <drm/drm_modes.h>
#include <drm/drm_panel.h>
#include <drm/drm_print.h>

#include <linux/gpio/consumer.h>
#include <linux/delay.h>
#include <linux/module.h>
#include <linux/of_device.h>
#include <linux/regulator/consumer.h>

#include <video/mipi_display.h>

/* Command2 BKx selection command */
#define DSI_CMD2BKX_SEL			0xFF

/* Command2, BK0 commands */
#define DSI_CMD2_BK0_PVGAMCTRL		0xB0 /* Positive Voltage Gamma Control */
#define DSI_CMD2_BK0_NVGAMCTRL		0xB1 /* Negative Voltage Gamma Control */
#define DSI_CMD2_BK0_LNESET		0xC0 /* Display Line setting */
#define DSI_CMD2_BK0_PORCTRL		0xC1 /* Porch control */
#define DSI_CMD2_BK0_INVSEL		0xC2 /* Inversion selection, Frame Rate Control */

/* Command2, BK1 commands */
#define DSI_CMD2_BK1_VRHS		0xB0 /* Vop amplitude setting */
#define DSI_CMD2_BK1_VCOM		0xB1 /* VCOM amplitude setting */
#define DSI_CMD2_BK1_VGHSS		0xB2 /* VGH Voltage setting */
#define DSI_CMD2_BK1_TESTCMD		0xB3 /* TEST Command Setting */
#define DSI_CMD2_BK1_VGLS		0xB5 /* VGL Voltage setting */
#define DSI_CMD2_BK1_PWCTLR1		0xB7 /* Power Control 1 */
#define DSI_CMD2_BK1_PWCTLR2		0xB8 /* Power Control 2 */
#define DSI_CMD2_BK1_SPD1		0xC1 /* Source pre_drive timing set1 */
#define DSI_CMD2_BK1_SPD2		0xC2 /* Source EQ2 Setting */
#define DSI_CMD2_BK1_MIPISET1		0xD0 /* MIPI Setting 1 */

/**
 * Command2 with BK function selection.
 *
 * BIT[4, 0]: [CN2, BKXSEL]
 * 10 = CMD2BK0, Command2 BK0
 * 11 = CMD2BK1, Command2 BK1
 * 00 = Command2 disable
 */
#define DSI_CMD2BK1_SEL			0x11
#define DSI_CMD2BK0_SEL			0x10
#define DSI_CMD2BKX_SEL_NONE		0x00

/* Command2, BK0 bytes */
#define DSI_LINESET_LINE		0x69
#define DSI_LINESET_LDE_EN		BIT(7)
#define DSI_LINESET_LINEDELTA		GENMASK(1, 0)
#define DSI_CMD2_BK0_LNESET_B1		DSI_LINESET_LINEDELTA
#define DSI_CMD2_BK0_LNESET_B0		(DSI_LINESET_LDE_EN | DSI_LINESET_LINE)
#define DSI_INVSEL_DEFAULT		GENMASK(5, 4)
#define DSI_INVSEL_NLINV		GENMASK(2, 0)
#define DSI_INVSEL_RTNI			GENMASK(2, 1)
#define DSI_CMD2_BK0_INVSEL_B1		DSI_INVSEL_RTNI
#define DSI_CMD2_BK0_INVSEL_B0		(DSI_INVSEL_DEFAULT | DSI_INVSEL_NLINV)
#define DSI_CMD2_BK0_PORCTRL_B0(m)	((m)->vtotal - (m)->vsync_end)
#define DSI_CMD2_BK0_PORCTRL_B1(m)	((m)->vsync_start - (m)->vdisplay)

/* Command2, BK1 bytes */
#define DSI_CMD2_BK1_VRHA_SET		0x45
#define DSI_CMD2_BK1_VCOM_SET		0x13
#define DSI_CMD2_BK1_VGHSS_SET		GENMASK(2, 0)
#define DSI_CMD2_BK1_TESTCMD_VAL	BIT(7)
#define DSI_VGLS_DEFAULT		BIT(6)
#define DSI_VGLS_SEL			GENMASK(2, 0)
#define DSI_CMD2_BK1_VGLS_SET		(DSI_VGLS_DEFAULT | DSI_VGLS_SEL)
#define DSI_PWCTLR1_AP			BIT(7) /* Gamma OP bias, max */
#define DSI_PWCTLR1_APIS		BIT(2) /* Source OP input bias, min */
#define DSI_PWCTLR1_APOS		BIT(0) /* Source OP output bias, min */
#define DSI_CMD2_BK1_PWCTLR1_SET	(DSI_PWCTLR1_AP | DSI_PWCTLR1_APIS | \
					DSI_PWCTLR1_APOS)
#define DSI_PWCTLR2_AVDD		BIT(5) /* AVDD 6.6v */
#define DSI_PWCTLR2_AVCL		0x0    /* AVCL -4.4v */
#define DSI_CMD2_BK1_PWCTLR2_SET	(DSI_PWCTLR2_AVDD | DSI_PWCTLR2_AVCL)
#define DSI_SPD1_T2D			BIT(3)
#define DSI_CMD2_BK1_SPD1_SET		(GENMASK(6, 4) | DSI_SPD1_T2D)
#define DSI_CMD2_BK1_SPD2_SET		DSI_CMD2_BK1_SPD1_SET
#define DSI_MIPISET1_EOT_EN		BIT(3)
#define DSI_CMD2_BK1_MIPISET1_SET	(BIT(7) | DSI_MIPISET1_EOT_EN)

struct st7701_panel_desc {
	const struct drm_display_mode *mode;
	unsigned int lanes;
	unsigned long flags;
	enum mipi_dsi_pixel_format format;
	const char *const *supply_names;
	unsigned int num_supplies;
	unsigned int panel_sleep_delay;
};

struct st7701 {
	struct drm_panel panel;
	struct mipi_dsi_device *dsi;
	const struct st7701_panel_desc *desc;

	struct regulator_bulk_data *supplies;
	struct gpio_desc *reset;
	unsigned int sleep_delay;
};

static inline struct st7701 *panel_to_st7701(struct drm_panel *panel)
{
	return container_of(panel, struct st7701, panel);
}

static inline int st7701_dsi_write(struct st7701 *st7701, const void *seq,
				   size_t len)
{
	return mipi_dsi_dcs_write_buffer(st7701->dsi, seq, len);
}

#define ST7701_DSI(st7701, seq...)				\
	{							\
		const u8 d[] = { seq };				\
		st7701_dsi_write(st7701, d, ARRAY_SIZE(d));	\
	}

static void st7701_init_sequence(struct st7701 *st7701)
{
	const struct drm_display_mode *mode = st7701->desc->mode;

	ST7701_DSI(st7701, MIPI_DCS_SOFT_RESET, 0x00);

	/* We need to wait 5ms before sending new commands */
	msleep(5);

	ST7701_DSI(st7701, MIPI_DCS_EXIT_SLEEP_MODE, 0x00);

	msleep(st7701->sleep_delay);

	/* Command2, BK0 */
	ST7701_DSI(st7701, DSI_CMD2BKX_SEL,
		   0x77, 0x01, 0x00, 0x00, DSI_CMD2BK0_SEL);
	ST7701_DSI(st7701, DSI_CMD2_BK0_PVGAMCTRL, 0x00, 0x0E, 0x15, 0x0F,
		   0x11, 0x08, 0x08, 0x08, 0x08, 0x23, 0x04, 0x13, 0x12,
		   0x2B, 0x34, 0x1F);
	ST7701_DSI(st7701, DSI_CMD2_BK0_NVGAMCTRL, 0x00, 0x0E, 0x95, 0x0F,
		   0x13, 0x07, 0x09, 0x08, 0x08, 0x22, 0x04, 0x10, 0x0E,
		   0x2C, 0x34, 0x1F);
	ST7701_DSI(st7701, DSI_CMD2_BK0_LNESET,
		   DSI_CMD2_BK0_LNESET_B0, DSI_CMD2_BK0_LNESET_B1);
	ST7701_DSI(st7701, DSI_CMD2_BK0_PORCTRL,
		   DSI_CMD2_BK0_PORCTRL_B0(mode),
		   DSI_CMD2_BK0_PORCTRL_B1(mode));
	ST7701_DSI(st7701, DSI_CMD2_BK0_INVSEL,
		   DSI_CMD2_BK0_INVSEL_B0, DSI_CMD2_BK0_INVSEL_B1);

	/* Command2, BK1 */
	ST7701_DSI(st7701, DSI_CMD2BKX_SEL,
			0x77, 0x01, 0x00, 0x00, DSI_CMD2BK1_SEL);
	ST7701_DSI(st7701, DSI_CMD2_BK1_VRHS, DSI_CMD2_BK1_VRHA_SET);
	ST7701_DSI(st7701, DSI_CMD2_BK1_VCOM, DSI_CMD2_BK1_VCOM_SET);
	ST7701_DSI(st7701, DSI_CMD2_BK1_VGHSS, DSI_CMD2_BK1_VGHSS_SET);
	ST7701_DSI(st7701, DSI_CMD2_BK1_TESTCMD, DSI_CMD2_BK1_TESTCMD_VAL);
	ST7701_DSI(st7701, DSI_CMD2_BK1_VGLS, DSI_CMD2_BK1_VGLS_SET);
	ST7701_DSI(st7701, DSI_CMD2_BK1_PWCTLR1, DSI_CMD2_BK1_PWCTLR1_SET);
	ST7701_DSI(st7701, DSI_CMD2_BK1_PWCTLR2, DSI_CMD2_BK1_PWCTLR2_SET);
	ST7701_DSI(st7701, DSI_CMD2_BK1_SPD1, DSI_CMD2_BK1_SPD1_SET);
	ST7701_DSI(st7701, DSI_CMD2_BK1_SPD2, DSI_CMD2_BK1_SPD2_SET);
	ST7701_DSI(st7701, DSI_CMD2_BK1_MIPISET1, DSI_CMD2_BK1_MIPISET1_SET);

	/**
	 * ST7701_SPEC_V1.2 is unable to provide enough information above this
	 * specific command sequence, so grab the same from vendor BSP driver.
	 */
	ST7701_DSI(st7701, 0xE0, 0x00, 0x00, 0x02);
	ST7701_DSI(st7701, 0xE1, 0x0B, 0x00, 0x0D, 0x00, 0x0C, 0x00, 0x0E,
		   0x00, 0x00, 0x44, 0x44);
	ST7701_DSI(st7701, 0xE2, 0x33, 0x33, 0x44, 0x44, 0x64, 0x00, 0x66,
		   0x00, 0x65, 0x00, 0x67, 0x00, 0x00);
	ST7701_DSI(st7701, 0xE3, 0x00, 0x00, 0x33, 0x33);
	ST7701_DSI(st7701, 0xE4, 0x44, 0x44);
	ST7701_DSI(st7701, 0xE5, 0x0C, 0x78, 0x3C, 0xA0, 0x0E, 0x78, 0x3C,
		   0xA0, 0x10, 0x78, 0x3C, 0xA0, 0x12, 0x78, 0x3C, 0xA0);
	ST7701_DSI(st7701, 0xE6, 0x00, 0x00, 0x33, 0x33);
	ST7701_DSI(st7701, 0xE7, 0x44, 0x44);
	ST7701_DSI(st7701, 0xE8, 0x0D, 0x78, 0x3C, 0xA0, 0x0F, 0x78, 0x3C,
		   0xA0, 0x11, 0x78, 0x3C, 0xA0, 0x13, 0x78, 0x3C, 0xA0);
	ST7701_DSI(st7701, 0xEB, 0x02, 0x02, 0x39, 0x39, 0xEE, 0x44, 0x00);
	ST7701_DSI(st7701, 0xEC, 0x00, 0x00);
	ST7701_DSI(st7701, 0xED, 0xFF, 0xF1, 0x04, 0x56, 0x72, 0x3F, 0xFF,
		   0xFF, 0xFF, 0xFF, 0xF3, 0x27, 0x65, 0x40, 0x1F, 0xFF);

	/* disable Command2 */
	ST7701_DSI(st7701, DSI_CMD2BKX_SEL,
		   0x77, 0x01, 0x00, 0x00, DSI_CMD2BKX_SEL_NONE);
}

static int st7701_prepare(struct drm_panel *panel)
{
	struct st7701 *st7701 = panel_to_st7701(panel);
	int ret;

	gpiod_set_value(st7701->reset, 0);

	ret = regulator_bulk_enable(st7701->desc->num_supplies,
				    st7701->supplies);
	if (ret < 0)
		return ret;
	msleep(20);

	gpiod_set_value(st7701->reset, 1);
	msleep(150);

	st7701_init_sequence(st7701);

	return 0;
}

static int st7701_enable(struct drm_panel *panel)
{
	struct st7701 *st7701 = panel_to_st7701(panel);

	ST7701_DSI(st7701, MIPI_DCS_SET_DISPLAY_ON, 0x00);

	return 0;
}

static int st7701_disable(struct drm_panel *panel)
{
	struct st7701 *st7701 = panel_to_st7701(panel);

	ST7701_DSI(st7701, MIPI_DCS_SET_DISPLAY_OFF, 0x00);

	return 0;
}

static int st7701_unprepare(struct drm_panel *panel)
{
	struct st7701 *st7701 = panel_to_st7701(panel);

	ST7701_DSI(st7701, MIPI_DCS_ENTER_SLEEP_MODE, 0x00);

	msleep(st7701->sleep_delay);

	gpiod_set_value(st7701->reset, 0);

	/**
	 * During the Resetting period, the display will be blanked
	 * (The display is entering blanking sequence, which maximum
	 * time is 120 ms, when Reset Starts in Sleep Out –mode. The
	 * display remains the blank state in Sleep In –mode.) and
	 * then return to Default condition for Hardware Reset.
	 *
	 * So we need wait sleep_delay time to make sure reset completed.
	 */
	msleep(st7701->sleep_delay);

	regulator_bulk_disable(st7701->desc->num_supplies, st7701->supplies);

	return 0;
}

static int st7701_get_modes(struct drm_panel *panel,
			    struct drm_connector *connector)
{
	struct st7701 *st7701 = panel_to_st7701(panel);
	const struct drm_display_mode *desc_mode = st7701->desc->mode;
	struct drm_display_mode *mode;

	mode = drm_mode_duplicate(connector->dev, desc_mode);
	if (!mode) {
		DRM_DEV_ERROR(&st7701->dsi->dev,
			      "failed to add mode %ux%ux@%u\n",
			      desc_mode->hdisplay, desc_mode->vdisplay,
			      desc_mode->vrefresh);
		return -ENOMEM;
	}

	drm_mode_set_name(mode);
	drm_mode_probed_add(connector, mode);

	connector->display_info.width_mm = desc_mode->width_mm;
	connector->display_info.height_mm = desc_mode->height_mm;

	return 1;
}

static const struct drm_panel_funcs st7701_funcs = {
	.disable	= st7701_disable,
	.unprepare	= st7701_unprepare,
	.prepare	= st7701_prepare,
	.enable		= st7701_enable,
	.get_modes	= st7701_get_modes,
};

static const struct drm_display_mode ts8550b_mode = {
	.clock		= 27500,

	.hdisplay	= 480,
	.hsync_start	= 480 + 38,
	.hsync_end	= 480 + 38 + 12,
	.htotal		= 480 + 38 + 12 + 12,

	.vdisplay	= 854,
	.vsync_start	= 854 + 18,
	.vsync_end	= 854 + 18 + 8,
	.vtotal		= 854 + 18 + 8 + 4,

	.width_mm	= 69,
	.height_mm	= 139,

	.type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED,
};

static const char * const ts8550b_supply_names[] = {
	"VCC",
	"IOVCC",
};

static const struct st7701_panel_desc ts8550b_desc = {
	.mode = &ts8550b_mode,
	.lanes = 2,
	.flags = MIPI_DSI_MODE_VIDEO,
	.format = MIPI_DSI_FMT_RGB888,
	.supply_names = ts8550b_supply_names,
	.num_supplies = ARRAY_SIZE(ts8550b_supply_names),
	.panel_sleep_delay = 80, /* panel need extra 80ms for sleep out cmd */
};

static int st7701_dsi_probe(struct mipi_dsi_device *dsi)
{
	const struct st7701_panel_desc *desc;
	struct st7701 *st7701;
	int ret, i;

	st7701 = devm_kzalloc(&dsi->dev, sizeof(*st7701), GFP_KERNEL);
	if (!st7701)
		return -ENOMEM;

	desc = of_device_get_match_data(&dsi->dev);
	dsi->mode_flags = desc->flags;
	dsi->format = desc->format;
	dsi->lanes = desc->lanes;

	st7701->supplies = devm_kcalloc(&dsi->dev, desc->num_supplies,
					sizeof(*st7701->supplies),
					GFP_KERNEL);
	if (!st7701->supplies)
		return -ENOMEM;

	for (i = 0; i < desc->num_supplies; i++)
		st7701->supplies[i].supply = desc->supply_names[i];

	ret = devm_regulator_bulk_get(&dsi->dev, desc->num_supplies,
				      st7701->supplies);
	if (ret < 0)
		return ret;

	st7701->reset = devm_gpiod_get(&dsi->dev, "reset", GPIOD_OUT_LOW);
	if (IS_ERR(st7701->reset)) {
		DRM_DEV_ERROR(&dsi->dev, "Couldn't get our reset GPIO\n");
		return PTR_ERR(st7701->reset);
	}

	drm_panel_init(&st7701->panel, &dsi->dev, &st7701_funcs,
		       DRM_MODE_CONNECTOR_DSI);

	/**
	 * Once sleep out has been issued, ST7701 IC required to wait 120ms
	 * before initiating new commands.
	 *
	 * On top of that some panels might need an extra delay to wait, so
	 * add panel specific delay for those cases. As now this panel specific
	 * delay information is referenced from those panel BSP driver, example
	 * ts8550b and there is no valid documentation for that.
	 */
	st7701->sleep_delay = 120 + desc->panel_sleep_delay;

	ret = drm_panel_of_backlight(&st7701->panel);
	if (ret)
		return ret;

	ret = drm_panel_add(&st7701->panel);
	if (ret < 0)
		return ret;

	mipi_dsi_set_drvdata(dsi, st7701);
	st7701->dsi = dsi;
	st7701->desc = desc;

	return mipi_dsi_attach(dsi);
}

static int st7701_dsi_remove(struct mipi_dsi_device *dsi)
{
	struct st7701 *st7701 = mipi_dsi_get_drvdata(dsi);

	mipi_dsi_detach(dsi);
	drm_panel_remove(&st7701->panel);

	return 0;
}

static const struct of_device_id st7701_of_match[] = {
	{ .compatible = "techstar,ts8550b", .data = &ts8550b_desc },
	{ }
};
MODULE_DEVICE_TABLE(of, st7701_of_match);

static struct mipi_dsi_driver st7701_dsi_driver = {
	.probe		= st7701_dsi_probe,
	.remove		= st7701_dsi_remove,
	.driver = {
		.name		= "st7701",
		.of_match_table	= st7701_of_match,
	},
};
module_mipi_dsi_driver(st7701_dsi_driver);

MODULE_AUTHOR("Jagan Teki <jagan@amarulasolutions.com>");
MODULE_DESCRIPTION("Sitronix ST7701 LCD Panel Driver");
MODULE_LICENSE("GPL");