summaryrefslogtreecommitdiff
path: root/drivers/net/phy/phy_device.c
blob: c8b0c34030d32cdf7cac3acfdc50903da5eecf0f (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839
840
841
842
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
881
882
883
884
885
886
887
888
889
890
891
892
893
894
895
896
897
898
899
900
901
902
903
904
905
906
907
908
909
910
911
912
913
914
915
916
917
918
919
920
921
922
923
924
925
926
927
928
929
930
931
932
933
934
935
936
937
938
939
940
941
942
943
944
945
946
947
948
949
950
951
952
953
954
955
956
957
958
959
960
961
962
963
964
965
966
967
968
969
970
971
972
973
974
975
976
977
978
979
980
981
982
983
984
985
986
987
988
989
990
991
992
993
994
995
996
997
998
999
1000
1001
1002
1003
1004
1005
1006
1007
1008
1009
1010
1011
1012
1013
1014
1015
1016
1017
1018
1019
1020
1021
1022
1023
1024
1025
1026
1027
1028
1029
1030
1031
1032
1033
1034
1035
1036
1037
1038
1039
1040
1041
1042
1043
1044
1045
1046
1047
1048
1049
1050
1051
1052
1053
1054
1055
1056
1057
1058
1059
1060
1061
1062
1063
1064
1065
1066
1067
1068
1069
1070
1071
1072
1073
1074
1075
1076
1077
1078
1079
1080
1081
1082
1083
1084
1085
1086
1087
1088
1089
1090
1091
1092
1093
1094
1095
1096
1097
1098
1099
1100
1101
1102
1103
1104
1105
1106
1107
1108
1109
1110
1111
1112
1113
1114
1115
1116
1117
1118
1119
1120
1121
1122
1123
1124
1125
1126
1127
1128
1129
1130
1131
1132
1133
1134
1135
1136
1137
1138
1139
1140
1141
1142
1143
1144
1145
1146
1147
1148
1149
1150
1151
1152
1153
1154
1155
1156
1157
1158
1159
1160
1161
1162
1163
1164
1165
1166
1167
1168
1169
1170
1171
1172
1173
1174
1175
1176
1177
1178
1179
1180
1181
1182
1183
1184
1185
1186
1187
1188
1189
1190
1191
1192
1193
1194
1195
1196
1197
1198
1199
1200
1201
1202
1203
1204
1205
1206
1207
1208
1209
1210
1211
1212
1213
1214
1215
1216
1217
1218
1219
1220
1221
1222
1223
1224
1225
1226
1227
1228
1229
1230
1231
1232
1233
1234
1235
1236
1237
1238
1239
1240
1241
1242
1243
1244
1245
1246
1247
1248
1249
1250
1251
1252
1253
1254
1255
1256
1257
1258
1259
1260
1261
1262
1263
1264
1265
1266
1267
1268
1269
1270
1271
1272
1273
1274
1275
1276
1277
1278
1279
1280
1281
1282
1283
1284
1285
1286
1287
1288
1289
1290
1291
1292
1293
1294
1295
1296
1297
1298
1299
1300
1301
1302
1303
1304
1305
1306
1307
1308
1309
1310
1311
1312
1313
1314
1315
1316
1317
1318
1319
1320
1321
1322
1323
1324
1325
1326
1327
1328
1329
1330
1331
1332
1333
1334
1335
1336
1337
1338
1339
1340
1341
1342
1343
1344
1345
1346
1347
1348
1349
1350
1351
1352
1353
1354
1355
1356
1357
1358
1359
1360
1361
1362
1363
1364
1365
1366
1367
1368
1369
1370
1371
1372
1373
1374
1375
1376
1377
1378
1379
1380
1381
1382
1383
1384
1385
1386
1387
1388
1389
1390
1391
1392
1393
1394
1395
1396
1397
1398
1399
1400
1401
1402
1403
1404
1405
1406
1407
1408
1409
1410
1411
1412
1413
1414
1415
1416
1417
1418
1419
1420
1421
1422
1423
1424
1425
1426
1427
1428
1429
1430
1431
1432
1433
1434
1435
1436
1437
1438
1439
1440
1441
1442
1443
1444
1445
1446
1447
1448
1449
1450
1451
1452
1453
1454
1455
1456
1457
1458
1459
1460
1461
1462
1463
1464
1465
1466
1467
1468
1469
1470
1471
1472
1473
1474
1475
1476
1477
1478
1479
1480
1481
1482
1483
1484
1485
1486
1487
1488
1489
1490
1491
1492
1493
1494
1495
1496
1497
1498
1499
1500
1501
1502
1503
1504
1505
1506
1507
1508
1509
1510
1511
1512
1513
1514
1515
1516
1517
1518
1519
1520
1521
1522
1523
1524
1525
1526
1527
1528
1529
1530
1531
1532
1533
1534
1535
1536
1537
1538
1539
1540
1541
1542
1543
1544
1545
1546
1547
1548
1549
1550
1551
1552
1553
1554
1555
1556
1557
1558
1559
1560
1561
1562
1563
1564
1565
1566
1567
1568
1569
1570
1571
1572
1573
1574
1575
1576
1577
1578
1579
1580
1581
1582
1583
1584
1585
1586
1587
1588
1589
1590
1591
1592
1593
1594
1595
1596
1597
1598
1599
1600
1601
1602
1603
1604
1605
1606
1607
1608
1609
1610
1611
1612
1613
1614
1615
1616
1617
1618
1619
1620
1621
1622
1623
1624
1625
1626
1627
1628
1629
1630
1631
1632
1633
1634
1635
1636
1637
1638
1639
1640
1641
1642
1643
1644
1645
1646
1647
1648
1649
1650
1651
1652
1653
1654
1655
1656
1657
1658
1659
1660
1661
1662
1663
1664
1665
1666
1667
1668
1669
1670
1671
1672
1673
1674
1675
1676
1677
1678
1679
1680
1681
1682
1683
1684
1685
1686
1687
1688
1689
1690
1691
1692
1693
1694
1695
1696
1697
1698
1699
1700
1701
1702
1703
1704
1705
1706
1707
1708
1709
1710
1711
1712
1713
1714
1715
1716
1717
1718
1719
1720
1721
1722
1723
1724
1725
1726
1727
1728
1729
1730
1731
1732
1733
1734
1735
1736
1737
1738
1739
1740
1741
1742
1743
1744
1745
1746
1747
1748
1749
1750
1751
1752
1753
1754
1755
1756
1757
1758
1759
1760
1761
1762
1763
1764
1765
1766
1767
1768
1769
1770
1771
1772
1773
1774
1775
1776
1777
1778
1779
1780
1781
1782
1783
1784
1785
1786
1787
1788
1789
1790
1791
1792
1793
1794
1795
1796
1797
1798
1799
1800
1801
1802
1803
1804
1805
1806
1807
1808
1809
1810
1811
1812
1813
1814
1815
1816
1817
1818
1819
1820
1821
1822
1823
1824
1825
1826
1827
1828
1829
1830
1831
1832
1833
1834
1835
1836
1837
1838
1839
1840
1841
1842
1843
1844
1845
1846
1847
1848
1849
1850
1851
1852
1853
1854
1855
1856
1857
1858
1859
1860
1861
1862
1863
1864
1865
1866
1867
1868
1869
1870
1871
1872
1873
1874
1875
1876
1877
1878
1879
1880
1881
1882
1883
1884
1885
1886
1887
1888
1889
1890
1891
1892
1893
1894
1895
1896
1897
1898
1899
1900
1901
1902
1903
1904
1905
1906
1907
1908
1909
1910
1911
1912
1913
1914
1915
1916
1917
1918
1919
1920
1921
1922
1923
1924
1925
1926
1927
1928
1929
1930
1931
1932
1933
1934
1935
1936
1937
1938
1939
1940
1941
1942
1943
1944
1945
1946
1947
1948
1949
1950
1951
1952
1953
1954
1955
1956
1957
1958
1959
1960
1961
1962
1963
1964
1965
1966
1967
1968
1969
1970
1971
1972
1973
1974
1975
1976
1977
1978
1979
1980
1981
1982
1983
1984
1985
1986
1987
1988
1989
1990
1991
1992
1993
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
2025
2026
2027
2028
2029
2030
2031
2032
2033
2034
2035
2036
2037
2038
2039
2040
2041
2042
2043
2044
2045
2046
2047
2048
2049
2050
2051
2052
2053
2054
2055
2056
2057
2058
2059
2060
2061
2062
2063
2064
2065
2066
2067
2068
2069
2070
2071
2072
2073
2074
2075
2076
2077
2078
2079
2080
2081
2082
2083
2084
2085
2086
2087
2088
2089
2090
2091
2092
2093
2094
2095
2096
2097
2098
2099
2100
2101
2102
2103
2104
2105
2106
2107
2108
2109
2110
2111
2112
2113
2114
2115
2116
2117
2118
2119
2120
2121
2122
2123
2124
2125
2126
2127
2128
2129
2130
2131
2132
2133
2134
2135
2136
2137
2138
2139
2140
2141
2142
2143
2144
2145
2146
2147
2148
2149
2150
2151
2152
2153
2154
2155
2156
2157
2158
2159
2160
2161
2162
2163
2164
2165
2166
2167
2168
2169
2170
2171
2172
2173
2174
2175
2176
2177
2178
2179
2180
2181
2182
2183
2184
2185
2186
2187
2188
2189
2190
2191
2192
2193
2194
2195
2196
2197
2198
2199
2200
2201
2202
2203
2204
2205
2206
2207
2208
2209
2210
2211
2212
2213
2214
2215
2216
2217
2218
2219
2220
2221
2222
2223
2224
2225
2226
2227
2228
2229
2230
2231
2232
2233
2234
2235
2236
2237
2238
2239
2240
2241
2242
2243
2244
2245
2246
2247
2248
2249
2250
2251
2252
2253
2254
2255
2256
2257
2258
2259
2260
2261
2262
2263
2264
2265
2266
2267
2268
2269
2270
2271
2272
2273
2274
2275
2276
2277
2278
2279
2280
2281
2282
2283
2284
2285
2286
2287
2288
2289
2290
2291
2292
2293
2294
2295
2296
2297
2298
2299
2300
2301
2302
2303
2304
2305
2306
2307
2308
2309
2310
2311
2312
2313
2314
2315
2316
2317
2318
2319
2320
2321
2322
2323
2324
2325
2326
2327
2328
2329
2330
2331
2332
2333
2334
2335
2336
2337
2338
2339
2340
2341
2342
2343
2344
2345
2346
2347
2348
2349
2350
2351
2352
2353
2354
2355
2356
2357
2358
2359
2360
2361
2362
2363
2364
2365
2366
2367
2368
2369
2370
2371
2372
2373
2374
2375
2376
2377
2378
2379
2380
2381
2382
2383
2384
2385
2386
2387
2388
2389
2390
2391
2392
2393
2394
2395
2396
2397
2398
2399
2400
2401
2402
2403
2404
2405
2406
2407
2408
2409
2410
2411
2412
2413
2414
2415
2416
2417
2418
2419
2420
2421
2422
2423
2424
2425
2426
2427
2428
2429
2430
2431
2432
2433
2434
2435
2436
2437
2438
2439
2440
2441
2442
2443
2444
2445
2446
2447
2448
2449
2450
2451
2452
2453
2454
2455
2456
2457
2458
2459
2460
2461
2462
2463
2464
2465
2466
2467
2468
2469
2470
2471
2472
2473
2474
2475
2476
2477
2478
2479
2480
2481
2482
2483
2484
2485
2486
2487
2488
2489
2490
2491
2492
2493
2494
2495
2496
2497
2498
2499
2500
2501
2502
2503
2504
2505
2506
2507
2508
2509
2510
2511
2512
2513
2514
2515
2516
2517
2518
2519
2520
2521
2522
2523
2524
2525
2526
2527
2528
2529
2530
2531
2532
2533
2534
2535
2536
2537
2538
2539
2540
2541
2542
2543
2544
2545
2546
2547
2548
2549
2550
2551
2552
2553
2554
2555
2556
2557
2558
2559
2560
2561
2562
2563
2564
2565
2566
2567
2568
2569
2570
2571
2572
2573
2574
2575
2576
2577
2578
2579
2580
2581
2582
2583
2584
2585
2586
2587
2588
2589
2590
2591
2592
2593
2594
2595
2596
2597
2598
2599
2600
2601
2602
2603
2604
2605
2606
2607
2608
2609
2610
2611
2612
2613
2614
2615
2616
2617
2618
2619
2620
2621
2622
2623
2624
2625
2626
2627
2628
2629
2630
2631
2632
2633
2634
2635
2636
2637
2638
2639
2640
2641
2642
2643
2644
2645
2646
2647
2648
2649
2650
2651
2652
2653
2654
2655
2656
2657
2658
2659
2660
// SPDX-License-Identifier: GPL-2.0+
/* Framework for finding and configuring PHYs.
 * Also contains generic PHY driver
 *
 * Author: Andy Fleming
 *
 * Copyright (c) 2004 Freescale Semiconductor, Inc.
 */

#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt

#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/errno.h>
#include <linux/unistd.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/skbuff.h>
#include <linux/mm.h>
#include <linux/module.h>
#include <linux/mii.h>
#include <linux/ethtool.h>
#include <linux/bitmap.h>
#include <linux/phy.h>
#include <linux/phy_led_triggers.h>
#include <linux/sfp.h>
#include <linux/mdio.h>
#include <linux/io.h>
#include <linux/uaccess.h>

MODULE_DESCRIPTION("PHY library");
MODULE_AUTHOR("Andy Fleming");
MODULE_LICENSE("GPL");

__ETHTOOL_DECLARE_LINK_MODE_MASK(phy_basic_features) __ro_after_init;
EXPORT_SYMBOL_GPL(phy_basic_features);

__ETHTOOL_DECLARE_LINK_MODE_MASK(phy_basic_t1_features) __ro_after_init;
EXPORT_SYMBOL_GPL(phy_basic_t1_features);

__ETHTOOL_DECLARE_LINK_MODE_MASK(phy_gbit_features) __ro_after_init;
EXPORT_SYMBOL_GPL(phy_gbit_features);

__ETHTOOL_DECLARE_LINK_MODE_MASK(phy_gbit_fibre_features) __ro_after_init;
EXPORT_SYMBOL_GPL(phy_gbit_fibre_features);

__ETHTOOL_DECLARE_LINK_MODE_MASK(phy_gbit_all_ports_features) __ro_after_init;
EXPORT_SYMBOL_GPL(phy_gbit_all_ports_features);

__ETHTOOL_DECLARE_LINK_MODE_MASK(phy_10gbit_features) __ro_after_init;
EXPORT_SYMBOL_GPL(phy_10gbit_features);

__ETHTOOL_DECLARE_LINK_MODE_MASK(phy_10gbit_fec_features) __ro_after_init;
EXPORT_SYMBOL_GPL(phy_10gbit_fec_features);

const int phy_basic_ports_array[3] = {
	ETHTOOL_LINK_MODE_Autoneg_BIT,
	ETHTOOL_LINK_MODE_TP_BIT,
	ETHTOOL_LINK_MODE_MII_BIT,
};
EXPORT_SYMBOL_GPL(phy_basic_ports_array);

const int phy_fibre_port_array[1] = {
	ETHTOOL_LINK_MODE_FIBRE_BIT,
};
EXPORT_SYMBOL_GPL(phy_fibre_port_array);

const int phy_all_ports_features_array[7] = {
	ETHTOOL_LINK_MODE_Autoneg_BIT,
	ETHTOOL_LINK_MODE_TP_BIT,
	ETHTOOL_LINK_MODE_MII_BIT,
	ETHTOOL_LINK_MODE_FIBRE_BIT,
	ETHTOOL_LINK_MODE_AUI_BIT,
	ETHTOOL_LINK_MODE_BNC_BIT,
	ETHTOOL_LINK_MODE_Backplane_BIT,
};
EXPORT_SYMBOL_GPL(phy_all_ports_features_array);

const int phy_10_100_features_array[4] = {
	ETHTOOL_LINK_MODE_10baseT_Half_BIT,
	ETHTOOL_LINK_MODE_10baseT_Full_BIT,
	ETHTOOL_LINK_MODE_100baseT_Half_BIT,
	ETHTOOL_LINK_MODE_100baseT_Full_BIT,
};
EXPORT_SYMBOL_GPL(phy_10_100_features_array);

const int phy_basic_t1_features_array[2] = {
	ETHTOOL_LINK_MODE_TP_BIT,
	ETHTOOL_LINK_MODE_100baseT1_Full_BIT,
};
EXPORT_SYMBOL_GPL(phy_basic_t1_features_array);

const int phy_gbit_features_array[2] = {
	ETHTOOL_LINK_MODE_1000baseT_Half_BIT,
	ETHTOOL_LINK_MODE_1000baseT_Full_BIT,
};
EXPORT_SYMBOL_GPL(phy_gbit_features_array);

const int phy_10gbit_features_array[1] = {
	ETHTOOL_LINK_MODE_10000baseT_Full_BIT,
};
EXPORT_SYMBOL_GPL(phy_10gbit_features_array);

const int phy_10gbit_fec_features_array[1] = {
	ETHTOOL_LINK_MODE_10000baseR_FEC_BIT,
};
EXPORT_SYMBOL_GPL(phy_10gbit_fec_features_array);

__ETHTOOL_DECLARE_LINK_MODE_MASK(phy_10gbit_full_features) __ro_after_init;
EXPORT_SYMBOL_GPL(phy_10gbit_full_features);

static const int phy_10gbit_full_features_array[] = {
	ETHTOOL_LINK_MODE_10baseT_Full_BIT,
	ETHTOOL_LINK_MODE_100baseT_Full_BIT,
	ETHTOOL_LINK_MODE_1000baseT_Full_BIT,
	ETHTOOL_LINK_MODE_10000baseT_Full_BIT,
};

static void features_init(void)
{
	/* 10/100 half/full*/
	linkmode_set_bit_array(phy_basic_ports_array,
			       ARRAY_SIZE(phy_basic_ports_array),
			       phy_basic_features);
	linkmode_set_bit_array(phy_10_100_features_array,
			       ARRAY_SIZE(phy_10_100_features_array),
			       phy_basic_features);

	/* 100 full, TP */
	linkmode_set_bit_array(phy_basic_t1_features_array,
			       ARRAY_SIZE(phy_basic_t1_features_array),
			       phy_basic_t1_features);

	/* 10/100 half/full + 1000 half/full */
	linkmode_set_bit_array(phy_basic_ports_array,
			       ARRAY_SIZE(phy_basic_ports_array),
			       phy_gbit_features);
	linkmode_set_bit_array(phy_10_100_features_array,
			       ARRAY_SIZE(phy_10_100_features_array),
			       phy_gbit_features);
	linkmode_set_bit_array(phy_gbit_features_array,
			       ARRAY_SIZE(phy_gbit_features_array),
			       phy_gbit_features);

	/* 10/100 half/full + 1000 half/full + fibre*/
	linkmode_set_bit_array(phy_basic_ports_array,
			       ARRAY_SIZE(phy_basic_ports_array),
			       phy_gbit_fibre_features);
	linkmode_set_bit_array(phy_10_100_features_array,
			       ARRAY_SIZE(phy_10_100_features_array),
			       phy_gbit_fibre_features);
	linkmode_set_bit_array(phy_gbit_features_array,
			       ARRAY_SIZE(phy_gbit_features_array),
			       phy_gbit_fibre_features);
	linkmode_set_bit_array(phy_fibre_port_array,
			       ARRAY_SIZE(phy_fibre_port_array),
			       phy_gbit_fibre_features);

	/* 10/100 half/full + 1000 half/full + TP/MII/FIBRE/AUI/BNC/Backplane*/
	linkmode_set_bit_array(phy_all_ports_features_array,
			       ARRAY_SIZE(phy_all_ports_features_array),
			       phy_gbit_all_ports_features);
	linkmode_set_bit_array(phy_10_100_features_array,
			       ARRAY_SIZE(phy_10_100_features_array),
			       phy_gbit_all_ports_features);
	linkmode_set_bit_array(phy_gbit_features_array,
			       ARRAY_SIZE(phy_gbit_features_array),
			       phy_gbit_all_ports_features);

	/* 10/100 half/full + 1000 half/full + 10G full*/
	linkmode_set_bit_array(phy_all_ports_features_array,
			       ARRAY_SIZE(phy_all_ports_features_array),
			       phy_10gbit_features);
	linkmode_set_bit_array(phy_10_100_features_array,
			       ARRAY_SIZE(phy_10_100_features_array),
			       phy_10gbit_features);
	linkmode_set_bit_array(phy_gbit_features_array,
			       ARRAY_SIZE(phy_gbit_features_array),
			       phy_10gbit_features);
	linkmode_set_bit_array(phy_10gbit_features_array,
			       ARRAY_SIZE(phy_10gbit_features_array),
			       phy_10gbit_features);

	/* 10/100/1000/10G full */
	linkmode_set_bit_array(phy_all_ports_features_array,
			       ARRAY_SIZE(phy_all_ports_features_array),
			       phy_10gbit_full_features);
	linkmode_set_bit_array(phy_10gbit_full_features_array,
			       ARRAY_SIZE(phy_10gbit_full_features_array),
			       phy_10gbit_full_features);
	/* 10G FEC only */
	linkmode_set_bit_array(phy_10gbit_fec_features_array,
			       ARRAY_SIZE(phy_10gbit_fec_features_array),
			       phy_10gbit_fec_features);
}

void phy_device_free(struct phy_device *phydev)
{
	put_device(&phydev->mdio.dev);
}
EXPORT_SYMBOL(phy_device_free);

static void phy_mdio_device_free(struct mdio_device *mdiodev)
{
	struct phy_device *phydev;

	phydev = container_of(mdiodev, struct phy_device, mdio);
	phy_device_free(phydev);
}

static void phy_device_release(struct device *dev)
{
	kfree(to_phy_device(dev));
}

static void phy_mdio_device_remove(struct mdio_device *mdiodev)
{
	struct phy_device *phydev;

	phydev = container_of(mdiodev, struct phy_device, mdio);
	phy_device_remove(phydev);
}

static struct phy_driver genphy_driver;
extern struct phy_driver genphy_c45_driver;

static LIST_HEAD(phy_fixup_list);
static DEFINE_MUTEX(phy_fixup_lock);

#ifdef CONFIG_PM
static bool mdio_bus_phy_may_suspend(struct phy_device *phydev)
{
	struct device_driver *drv = phydev->mdio.dev.driver;
	struct phy_driver *phydrv = to_phy_driver(drv);
	struct net_device *netdev = phydev->attached_dev;

	if (!drv || !phydrv->suspend)
		return false;

	/* PHY not attached? May suspend if the PHY has not already been
	 * suspended as part of a prior call to phy_disconnect() ->
	 * phy_detach() -> phy_suspend() because the parent netdev might be the
	 * MDIO bus driver and clock gated at this point.
	 */
	if (!netdev)
		goto out;

	if (netdev->wol_enabled)
		return false;

	/* As long as not all affected network drivers support the
	 * wol_enabled flag, let's check for hints that WoL is enabled.
	 * Don't suspend PHY if the attached netdev parent may wake up.
	 * The parent may point to a PCI device, as in tg3 driver.
	 */
	if (netdev->dev.parent && device_may_wakeup(netdev->dev.parent))
		return false;

	/* Also don't suspend PHY if the netdev itself may wakeup. This
	 * is the case for devices w/o underlaying pwr. mgmt. aware bus,
	 * e.g. SoC devices.
	 */
	if (device_may_wakeup(&netdev->dev))
		return false;

out:
	return !phydev->suspended;
}

static int mdio_bus_phy_suspend(struct device *dev)
{
	struct phy_device *phydev = to_phy_device(dev);

	/* We must stop the state machine manually, otherwise it stops out of
	 * control, possibly with the phydev->lock held. Upon resume, netdev
	 * may call phy routines that try to grab the same lock, and that may
	 * lead to a deadlock.
	 */
	if (phydev->attached_dev && phydev->adjust_link)
		phy_stop_machine(phydev);

	if (!mdio_bus_phy_may_suspend(phydev))
		return 0;

	return phy_suspend(phydev);
}

static int mdio_bus_phy_resume(struct device *dev)
{
	struct phy_device *phydev = to_phy_device(dev);
	int ret;

	if (!mdio_bus_phy_may_suspend(phydev))
		goto no_resume;

	ret = phy_resume(phydev);
	if (ret < 0)
		return ret;

no_resume:
	if (phydev->attached_dev && phydev->adjust_link)
		phy_start_machine(phydev);

	return 0;
}

static int mdio_bus_phy_restore(struct device *dev)
{
	struct phy_device *phydev = to_phy_device(dev);
	struct net_device *netdev = phydev->attached_dev;
	int ret;

	if (!netdev)
		return 0;

	ret = phy_init_hw(phydev);
	if (ret < 0)
		return ret;

	if (phydev->attached_dev && phydev->adjust_link)
		phy_start_machine(phydev);

	return 0;
}

static const struct dev_pm_ops mdio_bus_phy_pm_ops = {
	.suspend = mdio_bus_phy_suspend,
	.resume = mdio_bus_phy_resume,
	.freeze = mdio_bus_phy_suspend,
	.thaw = mdio_bus_phy_resume,
	.restore = mdio_bus_phy_restore,
};

#define MDIO_BUS_PHY_PM_OPS (&mdio_bus_phy_pm_ops)

#else

#define MDIO_BUS_PHY_PM_OPS NULL

#endif /* CONFIG_PM */

/**
 * phy_register_fixup - creates a new phy_fixup and adds it to the list
 * @bus_id: A string which matches phydev->mdio.dev.bus_id (or PHY_ANY_ID)
 * @phy_uid: Used to match against phydev->phy_id (the UID of the PHY)
 *	It can also be PHY_ANY_UID
 * @phy_uid_mask: Applied to phydev->phy_id and fixup->phy_uid before
 *	comparison
 * @run: The actual code to be run when a matching PHY is found
 */
int phy_register_fixup(const char *bus_id, u32 phy_uid, u32 phy_uid_mask,
		       int (*run)(struct phy_device *))
{
	struct phy_fixup *fixup = kzalloc(sizeof(*fixup), GFP_KERNEL);

	if (!fixup)
		return -ENOMEM;

	strlcpy(fixup->bus_id, bus_id, sizeof(fixup->bus_id));
	fixup->phy_uid = phy_uid;
	fixup->phy_uid_mask = phy_uid_mask;
	fixup->run = run;

	mutex_lock(&phy_fixup_lock);
	list_add_tail(&fixup->list, &phy_fixup_list);
	mutex_unlock(&phy_fixup_lock);

	return 0;
}
EXPORT_SYMBOL(phy_register_fixup);

/* Registers a fixup to be run on any PHY with the UID in phy_uid */
int phy_register_fixup_for_uid(u32 phy_uid, u32 phy_uid_mask,
			       int (*run)(struct phy_device *))
{
	return phy_register_fixup(PHY_ANY_ID, phy_uid, phy_uid_mask, run);
}
EXPORT_SYMBOL(phy_register_fixup_for_uid);

/* Registers a fixup to be run on the PHY with id string bus_id */
int phy_register_fixup_for_id(const char *bus_id,
			      int (*run)(struct phy_device *))
{
	return phy_register_fixup(bus_id, PHY_ANY_UID, 0xffffffff, run);
}
EXPORT_SYMBOL(phy_register_fixup_for_id);

/**
 * phy_unregister_fixup - remove a phy_fixup from the list
 * @bus_id: A string matches fixup->bus_id (or PHY_ANY_ID) in phy_fixup_list
 * @phy_uid: A phy id matches fixup->phy_id (or PHY_ANY_UID) in phy_fixup_list
 * @phy_uid_mask: Applied to phy_uid and fixup->phy_uid before comparison
 */
int phy_unregister_fixup(const char *bus_id, u32 phy_uid, u32 phy_uid_mask)
{
	struct list_head *pos, *n;
	struct phy_fixup *fixup;
	int ret;

	ret = -ENODEV;

	mutex_lock(&phy_fixup_lock);
	list_for_each_safe(pos, n, &phy_fixup_list) {
		fixup = list_entry(pos, struct phy_fixup, list);

		if ((!strcmp(fixup->bus_id, bus_id)) &&
		    ((fixup->phy_uid & phy_uid_mask) ==
		     (phy_uid & phy_uid_mask))) {
			list_del(&fixup->list);
			kfree(fixup);
			ret = 0;
			break;
		}
	}
	mutex_unlock(&phy_fixup_lock);

	return ret;
}
EXPORT_SYMBOL(phy_unregister_fixup);

/* Unregisters a fixup of any PHY with the UID in phy_uid */
int phy_unregister_fixup_for_uid(u32 phy_uid, u32 phy_uid_mask)
{
	return phy_unregister_fixup(PHY_ANY_ID, phy_uid, phy_uid_mask);
}
EXPORT_SYMBOL(phy_unregister_fixup_for_uid);

/* Unregisters a fixup of the PHY with id string bus_id */
int phy_unregister_fixup_for_id(const char *bus_id)
{
	return phy_unregister_fixup(bus_id, PHY_ANY_UID, 0xffffffff);
}
EXPORT_SYMBOL(phy_unregister_fixup_for_id);

/* Returns 1 if fixup matches phydev in bus_id and phy_uid.
 * Fixups can be set to match any in one or more fields.
 */
static int phy_needs_fixup(struct phy_device *phydev, struct phy_fixup *fixup)
{
	if (strcmp(fixup->bus_id, phydev_name(phydev)) != 0)
		if (strcmp(fixup->bus_id, PHY_ANY_ID) != 0)
			return 0;

	if ((fixup->phy_uid & fixup->phy_uid_mask) !=
	    (phydev->phy_id & fixup->phy_uid_mask))
		if (fixup->phy_uid != PHY_ANY_UID)
			return 0;

	return 1;
}

/* Runs any matching fixups for this phydev */
static int phy_scan_fixups(struct phy_device *phydev)
{
	struct phy_fixup *fixup;

	mutex_lock(&phy_fixup_lock);
	list_for_each_entry(fixup, &phy_fixup_list, list) {
		if (phy_needs_fixup(phydev, fixup)) {
			int err = fixup->run(phydev);

			if (err < 0) {
				mutex_unlock(&phy_fixup_lock);
				return err;
			}
			phydev->has_fixups = true;
		}
	}
	mutex_unlock(&phy_fixup_lock);

	return 0;
}

static int phy_bus_match(struct device *dev, struct device_driver *drv)
{
	struct phy_device *phydev = to_phy_device(dev);
	struct phy_driver *phydrv = to_phy_driver(drv);
	const int num_ids = ARRAY_SIZE(phydev->c45_ids.device_ids);
	int i;

	if (!(phydrv->mdiodrv.flags & MDIO_DEVICE_IS_PHY))
		return 0;

	if (phydrv->match_phy_device)
		return phydrv->match_phy_device(phydev);

	if (phydev->is_c45) {
		for (i = 1; i < num_ids; i++) {
			if (phydev->c45_ids.device_ids[i] == 0xffffffff)
				continue;

			if ((phydrv->phy_id & phydrv->phy_id_mask) ==
			    (phydev->c45_ids.device_ids[i] &
			     phydrv->phy_id_mask))
				return 1;
		}
		return 0;
	} else {
		return (phydrv->phy_id & phydrv->phy_id_mask) ==
			(phydev->phy_id & phydrv->phy_id_mask);
	}
}

static ssize_t
phy_id_show(struct device *dev, struct device_attribute *attr, char *buf)
{
	struct phy_device *phydev = to_phy_device(dev);

	return sprintf(buf, "0x%.8lx\n", (unsigned long)phydev->phy_id);
}
static DEVICE_ATTR_RO(phy_id);

static ssize_t
phy_interface_show(struct device *dev, struct device_attribute *attr, char *buf)
{
	struct phy_device *phydev = to_phy_device(dev);
	const char *mode = NULL;

	if (phy_is_internal(phydev))
		mode = "internal";
	else
		mode = phy_modes(phydev->interface);

	return sprintf(buf, "%s\n", mode);
}
static DEVICE_ATTR_RO(phy_interface);

static ssize_t
phy_has_fixups_show(struct device *dev, struct device_attribute *attr,
		    char *buf)
{
	struct phy_device *phydev = to_phy_device(dev);

	return sprintf(buf, "%d\n", phydev->has_fixups);
}
static DEVICE_ATTR_RO(phy_has_fixups);

static struct attribute *phy_dev_attrs[] = {
	&dev_attr_phy_id.attr,
	&dev_attr_phy_interface.attr,
	&dev_attr_phy_has_fixups.attr,
	NULL,
};
ATTRIBUTE_GROUPS(phy_dev);

static const struct device_type mdio_bus_phy_type = {
	.name = "PHY",
	.groups = phy_dev_groups,
	.release = phy_device_release,
	.pm = MDIO_BUS_PHY_PM_OPS,
};

static int phy_request_driver_module(struct phy_device *dev, u32 phy_id)
{
	int ret;

	ret = request_module(MDIO_MODULE_PREFIX MDIO_ID_FMT,
			     MDIO_ID_ARGS(phy_id));
	/* We only check for failures in executing the usermode binary,
	 * not whether a PHY driver module exists for the PHY ID.
	 * Accept -ENOENT because this may occur in case no initramfs exists,
	 * then modprobe isn't available.
	 */
	if (IS_ENABLED(CONFIG_MODULES) && ret < 0 && ret != -ENOENT) {
		phydev_err(dev, "error %d loading PHY driver module for ID 0x%08lx\n",
			   ret, (unsigned long)phy_id);
		return ret;
	}

	return 0;
}

struct phy_device *phy_device_create(struct mii_bus *bus, int addr, u32 phy_id,
				     bool is_c45,
				     struct phy_c45_device_ids *c45_ids)
{
	struct phy_device *dev;
	struct mdio_device *mdiodev;
	int ret = 0;

	/* We allocate the device, and initialize the default values */
	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
	if (!dev)
		return ERR_PTR(-ENOMEM);

	mdiodev = &dev->mdio;
	mdiodev->dev.parent = &bus->dev;
	mdiodev->dev.bus = &mdio_bus_type;
	mdiodev->dev.type = &mdio_bus_phy_type;
	mdiodev->bus = bus;
	mdiodev->bus_match = phy_bus_match;
	mdiodev->addr = addr;
	mdiodev->flags = MDIO_DEVICE_FLAG_PHY;
	mdiodev->device_free = phy_mdio_device_free;
	mdiodev->device_remove = phy_mdio_device_remove;

	dev->speed = SPEED_UNKNOWN;
	dev->duplex = DUPLEX_UNKNOWN;
	dev->pause = 0;
	dev->asym_pause = 0;
	dev->link = 0;
	dev->interface = PHY_INTERFACE_MODE_GMII;

	dev->autoneg = AUTONEG_ENABLE;

	dev->is_c45 = is_c45;
	dev->phy_id = phy_id;
	if (c45_ids)
		dev->c45_ids = *c45_ids;
	dev->irq = bus->irq[addr];
	dev_set_name(&mdiodev->dev, PHY_ID_FMT, bus->id, addr);

	dev->state = PHY_DOWN;

	mutex_init(&dev->lock);
	INIT_DELAYED_WORK(&dev->state_queue, phy_state_machine);

	/* Request the appropriate module unconditionally; don't
	 * bother trying to do so only if it isn't already loaded,
	 * because that gets complicated. A hotplug event would have
	 * done an unconditional modprobe anyway.
	 * We don't do normal hotplug because it won't work for MDIO
	 * -- because it relies on the device staying around for long
	 * enough for the driver to get loaded. With MDIO, the NIC
	 * driver will get bored and give up as soon as it finds that
	 * there's no driver _already_ loaded.
	 */
	if (is_c45 && c45_ids) {
		const int num_ids = ARRAY_SIZE(c45_ids->device_ids);
		int i;

		for (i = 1; i < num_ids; i++) {
			if (c45_ids->device_ids[i] == 0xffffffff)
				continue;

			ret = phy_request_driver_module(dev,
						c45_ids->device_ids[i]);
			if (ret)
				break;
		}
	} else {
		ret = phy_request_driver_module(dev, phy_id);
	}

	if (!ret) {
		device_initialize(&mdiodev->dev);
	} else {
		kfree(dev);
		dev = ERR_PTR(ret);
	}

	return dev;
}
EXPORT_SYMBOL(phy_device_create);

/* get_phy_c45_devs_in_pkg - reads a MMD's devices in package registers.
 * @bus: the target MII bus
 * @addr: PHY address on the MII bus
 * @dev_addr: MMD address in the PHY.
 * @devices_in_package: where to store the devices in package information.
 *
 * Description: reads devices in package registers of a MMD at @dev_addr
 * from PHY at @addr on @bus.
 *
 * Returns: 0 on success, -EIO on failure.
 */
static int get_phy_c45_devs_in_pkg(struct mii_bus *bus, int addr, int dev_addr,
				   u32 *devices_in_package)
{
	int phy_reg, reg_addr;

	reg_addr = MII_ADDR_C45 | dev_addr << 16 | MDIO_DEVS2;
	phy_reg = mdiobus_read(bus, addr, reg_addr);
	if (phy_reg < 0)
		return -EIO;
	*devices_in_package = phy_reg << 16;

	reg_addr = MII_ADDR_C45 | dev_addr << 16 | MDIO_DEVS1;
	phy_reg = mdiobus_read(bus, addr, reg_addr);
	if (phy_reg < 0)
		return -EIO;
	*devices_in_package |= phy_reg;

	/* Bit 0 doesn't represent a device, it indicates c22 regs presence */
	*devices_in_package &= ~BIT(0);

	return 0;
}

/**
 * get_phy_c45_ids - reads the specified addr for its 802.3-c45 IDs.
 * @bus: the target MII bus
 * @addr: PHY address on the MII bus
 * @phy_id: where to store the ID retrieved.
 * @c45_ids: where to store the c45 ID information.
 *
 *   If the PHY devices-in-package appears to be valid, it and the
 *   corresponding identifiers are stored in @c45_ids, zero is stored
 *   in @phy_id.  Otherwise 0xffffffff is stored in @phy_id.  Returns
 *   zero on success.
 *
 */
static int get_phy_c45_ids(struct mii_bus *bus, int addr, u32 *phy_id,
			   struct phy_c45_device_ids *c45_ids) {
	int phy_reg;
	int i, reg_addr;
	const int num_ids = ARRAY_SIZE(c45_ids->device_ids);
	u32 *devs = &c45_ids->devices_in_package;

	/* Find first non-zero Devices In package. Device zero is reserved
	 * for 802.3 c45 complied PHYs, so don't probe it at first.
	 */
	for (i = 1; i < num_ids && *devs == 0; i++) {
		phy_reg = get_phy_c45_devs_in_pkg(bus, addr, i, devs);
		if (phy_reg < 0)
			return -EIO;

		if ((*devs & 0x1fffffff) == 0x1fffffff) {
			/*  If mostly Fs, there is no device there,
			 *  then let's continue to probe more, as some
			 *  10G PHYs have zero Devices In package,
			 *  e.g. Cortina CS4315/CS4340 PHY.
			 */
			phy_reg = get_phy_c45_devs_in_pkg(bus, addr, 0, devs);
			if (phy_reg < 0)
				return -EIO;
			/* no device there, let's get out of here */
			if ((*devs & 0x1fffffff) == 0x1fffffff) {
				*phy_id = 0xffffffff;
				return 0;
			} else {
				break;
			}
		}
	}

	/* Now probe Device Identifiers for each device present. */
	for (i = 1; i < num_ids; i++) {
		if (!(c45_ids->devices_in_package & (1 << i)))
			continue;

		reg_addr = MII_ADDR_C45 | i << 16 | MII_PHYSID1;
		phy_reg = mdiobus_read(bus, addr, reg_addr);
		if (phy_reg < 0)
			return -EIO;
		c45_ids->device_ids[i] = phy_reg << 16;

		reg_addr = MII_ADDR_C45 | i << 16 | MII_PHYSID2;
		phy_reg = mdiobus_read(bus, addr, reg_addr);
		if (phy_reg < 0)
			return -EIO;
		c45_ids->device_ids[i] |= phy_reg;
	}
	*phy_id = 0;
	return 0;
}

/**
 * get_phy_id - reads the specified addr for its ID.
 * @bus: the target MII bus
 * @addr: PHY address on the MII bus
 * @phy_id: where to store the ID retrieved.
 * @is_c45: If true the PHY uses the 802.3 clause 45 protocol
 * @c45_ids: where to store the c45 ID information.
 *
 * Description: In the case of a 802.3-c22 PHY, reads the ID registers
 *   of the PHY at @addr on the @bus, stores it in @phy_id and returns
 *   zero on success.
 *
 *   In the case of a 802.3-c45 PHY, get_phy_c45_ids() is invoked, and
 *   its return value is in turn returned.
 *
 */
static int get_phy_id(struct mii_bus *bus, int addr, u32 *phy_id,
		      bool is_c45, struct phy_c45_device_ids *c45_ids)
{
	int phy_reg;

	if (is_c45)
		return get_phy_c45_ids(bus, addr, phy_id, c45_ids);

	/* Grab the bits from PHYIR1, and put them in the upper half */
	phy_reg = mdiobus_read(bus, addr, MII_PHYSID1);
	if (phy_reg < 0) {
		/* returning -ENODEV doesn't stop bus scanning */
		return (phy_reg == -EIO || phy_reg == -ENODEV) ? -ENODEV : -EIO;
	}

	*phy_id = phy_reg << 16;

	/* Grab the bits from PHYIR2, and put them in the lower half */
	phy_reg = mdiobus_read(bus, addr, MII_PHYSID2);
	if (phy_reg < 0)
		return -EIO;

	*phy_id |= phy_reg;

	return 0;
}

/**
 * get_phy_device - reads the specified PHY device and returns its @phy_device
 *		    struct
 * @bus: the target MII bus
 * @addr: PHY address on the MII bus
 * @is_c45: If true the PHY uses the 802.3 clause 45 protocol
 *
 * Description: Reads the ID registers of the PHY at @addr on the
 *   @bus, then allocates and returns the phy_device to represent it.
 */
struct phy_device *get_phy_device(struct mii_bus *bus, int addr, bool is_c45)
{
	struct phy_c45_device_ids c45_ids;
	u32 phy_id = 0;
	int r;

	c45_ids.devices_in_package = 0;
	memset(c45_ids.device_ids, 0xff, sizeof(c45_ids.device_ids));

	r = get_phy_id(bus, addr, &phy_id, is_c45, &c45_ids);
	if (r)
		return ERR_PTR(r);

	/* If the phy_id is mostly Fs, there is no device there */
	if ((phy_id & 0x1fffffff) == 0x1fffffff)
		return ERR_PTR(-ENODEV);

	return phy_device_create(bus, addr, phy_id, is_c45, &c45_ids);
}
EXPORT_SYMBOL(get_phy_device);

/**
 * phy_device_register - Register the phy device on the MDIO bus
 * @phydev: phy_device structure to be added to the MDIO bus
 */
int phy_device_register(struct phy_device *phydev)
{
	int err;

	err = mdiobus_register_device(&phydev->mdio);
	if (err)
		return err;

	/* Deassert the reset signal */
	phy_device_reset(phydev, 0);

	/* Run all of the fixups for this PHY */
	err = phy_scan_fixups(phydev);
	if (err) {
		phydev_err(phydev, "failed to initialize\n");
		goto out;
	}

	err = device_add(&phydev->mdio.dev);
	if (err) {
		phydev_err(phydev, "failed to add\n");
		goto out;
	}

	return 0;

 out:
	/* Assert the reset signal */
	phy_device_reset(phydev, 1);

	mdiobus_unregister_device(&phydev->mdio);
	return err;
}
EXPORT_SYMBOL(phy_device_register);

/**
 * phy_device_remove - Remove a previously registered phy device from the MDIO bus
 * @phydev: phy_device structure to remove
 *
 * This doesn't free the phy_device itself, it merely reverses the effects
 * of phy_device_register(). Use phy_device_free() to free the device
 * after calling this function.
 */
void phy_device_remove(struct phy_device *phydev)
{
	if (phydev->mii_ts)
		unregister_mii_timestamper(phydev->mii_ts);

	device_del(&phydev->mdio.dev);

	/* Assert the reset signal */
	phy_device_reset(phydev, 1);

	mdiobus_unregister_device(&phydev->mdio);
}
EXPORT_SYMBOL(phy_device_remove);

/**
 * phy_find_first - finds the first PHY device on the bus
 * @bus: the target MII bus
 */
struct phy_device *phy_find_first(struct mii_bus *bus)
{
	struct phy_device *phydev;
	int addr;

	for (addr = 0; addr < PHY_MAX_ADDR; addr++) {
		phydev = mdiobus_get_phy(bus, addr);
		if (phydev)
			return phydev;
	}
	return NULL;
}
EXPORT_SYMBOL(phy_find_first);

static void phy_link_change(struct phy_device *phydev, bool up, bool do_carrier)
{
	struct net_device *netdev = phydev->attached_dev;

	if (do_carrier) {
		if (up)
			netif_carrier_on(netdev);
		else
			netif_carrier_off(netdev);
	}
	phydev->adjust_link(netdev);
	if (phydev->mii_ts && phydev->mii_ts->link_state)
		phydev->mii_ts->link_state(phydev->mii_ts, phydev);
}

/**
 * phy_prepare_link - prepares the PHY layer to monitor link status
 * @phydev: target phy_device struct
 * @handler: callback function for link status change notifications
 *
 * Description: Tells the PHY infrastructure to handle the
 *   gory details on monitoring link status (whether through
 *   polling or an interrupt), and to call back to the
 *   connected device driver when the link status changes.
 *   If you want to monitor your own link state, don't call
 *   this function.
 */
static void phy_prepare_link(struct phy_device *phydev,
			     void (*handler)(struct net_device *))
{
	phydev->adjust_link = handler;
}

/**
 * phy_connect_direct - connect an ethernet device to a specific phy_device
 * @dev: the network device to connect
 * @phydev: the pointer to the phy device
 * @handler: callback function for state change notifications
 * @interface: PHY device's interface
 */
int phy_connect_direct(struct net_device *dev, struct phy_device *phydev,
		       void (*handler)(struct net_device *),
		       phy_interface_t interface)
{
	int rc;

	if (!dev)
		return -EINVAL;

	rc = phy_attach_direct(dev, phydev, phydev->dev_flags, interface);
	if (rc)
		return rc;

	phy_prepare_link(phydev, handler);
	if (phy_interrupt_is_valid(phydev))
		phy_request_interrupt(phydev);

	return 0;
}
EXPORT_SYMBOL(phy_connect_direct);

/**
 * phy_connect - connect an ethernet device to a PHY device
 * @dev: the network device to connect
 * @bus_id: the id string of the PHY device to connect
 * @handler: callback function for state change notifications
 * @interface: PHY device's interface
 *
 * Description: Convenience function for connecting ethernet
 *   devices to PHY devices.  The default behavior is for
 *   the PHY infrastructure to handle everything, and only notify
 *   the connected driver when the link status changes.  If you
 *   don't want, or can't use the provided functionality, you may
 *   choose to call only the subset of functions which provide
 *   the desired functionality.
 */
struct phy_device *phy_connect(struct net_device *dev, const char *bus_id,
			       void (*handler)(struct net_device *),
			       phy_interface_t interface)
{
	struct phy_device *phydev;
	struct device *d;
	int rc;

	/* Search the list of PHY devices on the mdio bus for the
	 * PHY with the requested name
	 */
	d = bus_find_device_by_name(&mdio_bus_type, NULL, bus_id);
	if (!d) {
		pr_err("PHY %s not found\n", bus_id);
		return ERR_PTR(-ENODEV);
	}
	phydev = to_phy_device(d);

	rc = phy_connect_direct(dev, phydev, handler, interface);
	put_device(d);
	if (rc)
		return ERR_PTR(rc);

	return phydev;
}
EXPORT_SYMBOL(phy_connect);

/**
 * phy_disconnect - disable interrupts, stop state machine, and detach a PHY
 *		    device
 * @phydev: target phy_device struct
 */
void phy_disconnect(struct phy_device *phydev)
{
	if (phy_is_started(phydev))
		phy_stop(phydev);

	if (phy_interrupt_is_valid(phydev))
		phy_free_interrupt(phydev);

	phydev->adjust_link = NULL;

	phy_detach(phydev);
}
EXPORT_SYMBOL(phy_disconnect);

/**
 * phy_poll_reset - Safely wait until a PHY reset has properly completed
 * @phydev: The PHY device to poll
 *
 * Description: According to IEEE 802.3, Section 2, Subsection 22.2.4.1.1, as
 *   published in 2008, a PHY reset may take up to 0.5 seconds.  The MII BMCR
 *   register must be polled until the BMCR_RESET bit clears.
 *
 *   Furthermore, any attempts to write to PHY registers may have no effect
 *   or even generate MDIO bus errors until this is complete.
 *
 *   Some PHYs (such as the Marvell 88E1111) don't entirely conform to the
 *   standard and do not fully reset after the BMCR_RESET bit is set, and may
 *   even *REQUIRE* a soft-reset to properly restart autonegotiation.  In an
 *   effort to support such broken PHYs, this function is separate from the
 *   standard phy_init_hw() which will zero all the other bits in the BMCR
 *   and reapply all driver-specific and board-specific fixups.
 */
static int phy_poll_reset(struct phy_device *phydev)
{
	/* Poll until the reset bit clears (50ms per retry == 0.6 sec) */
	unsigned int retries = 12;
	int ret;

	do {
		msleep(50);
		ret = phy_read(phydev, MII_BMCR);
		if (ret < 0)
			return ret;
	} while (ret & BMCR_RESET && --retries);
	if (ret & BMCR_RESET)
		return -ETIMEDOUT;

	/* Some chips (smsc911x) may still need up to another 1ms after the
	 * BMCR_RESET bit is cleared before they are usable.
	 */
	msleep(1);
	return 0;
}

int phy_init_hw(struct phy_device *phydev)
{
	int ret = 0;

	/* Deassert the reset signal */
	phy_device_reset(phydev, 0);

	if (!phydev->drv)
		return 0;

	if (phydev->drv->soft_reset)
		ret = phydev->drv->soft_reset(phydev);

	if (ret < 0)
		return ret;

	ret = phy_scan_fixups(phydev);
	if (ret < 0)
		return ret;

	if (phydev->drv->config_init)
		ret = phydev->drv->config_init(phydev);

	return ret;
}
EXPORT_SYMBOL(phy_init_hw);

void phy_attached_info(struct phy_device *phydev)
{
	phy_attached_print(phydev, NULL);
}
EXPORT_SYMBOL(phy_attached_info);

#define ATTACHED_FMT "attached PHY driver [%s] (mii_bus:phy_addr=%s, irq=%s)"
char *phy_attached_info_irq(struct phy_device *phydev)
{
	char *irq_str;
	char irq_num[8];

	switch(phydev->irq) {
	case PHY_POLL:
		irq_str = "POLL";
		break;
	case PHY_IGNORE_INTERRUPT:
		irq_str = "IGNORE";
		break;
	default:
		snprintf(irq_num, sizeof(irq_num), "%d", phydev->irq);
		irq_str = irq_num;
		break;
	}

	return kasprintf(GFP_KERNEL, "%s", irq_str);
}
EXPORT_SYMBOL(phy_attached_info_irq);

void phy_attached_print(struct phy_device *phydev, const char *fmt, ...)
{
	const char *drv_name = phydev->drv ? phydev->drv->name : "unbound";
	char *irq_str = phy_attached_info_irq(phydev);

	if (!fmt) {
		phydev_info(phydev, ATTACHED_FMT "\n",
			 drv_name, phydev_name(phydev),
			 irq_str);
	} else {
		va_list ap;

		phydev_info(phydev, ATTACHED_FMT,
			 drv_name, phydev_name(phydev),
			 irq_str);

		va_start(ap, fmt);
		vprintk(fmt, ap);
		va_end(ap);
	}
	kfree(irq_str);
}
EXPORT_SYMBOL(phy_attached_print);

static void phy_sysfs_create_links(struct phy_device *phydev)
{
	struct net_device *dev = phydev->attached_dev;
	int err;

	if (!dev)
		return;

	err = sysfs_create_link(&phydev->mdio.dev.kobj, &dev->dev.kobj,
				"attached_dev");
	if (err)
		return;

	err = sysfs_create_link_nowarn(&dev->dev.kobj,
				       &phydev->mdio.dev.kobj,
				       "phydev");
	if (err) {
		dev_err(&dev->dev, "could not add device link to %s err %d\n",
			kobject_name(&phydev->mdio.dev.kobj),
			err);
		/* non-fatal - some net drivers can use one netdevice
		 * with more then one phy
		 */
	}

	phydev->sysfs_links = true;
}

static ssize_t
phy_standalone_show(struct device *dev, struct device_attribute *attr,
		    char *buf)
{
	struct phy_device *phydev = to_phy_device(dev);

	return sprintf(buf, "%d\n", !phydev->attached_dev);
}
static DEVICE_ATTR_RO(phy_standalone);

/**
 * phy_sfp_attach - attach the SFP bus to the PHY upstream network device
 * @upstream: pointer to the phy device
 * @bus: sfp bus representing cage being attached
 *
 * This is used to fill in the sfp_upstream_ops .attach member.
 */
void phy_sfp_attach(void *upstream, struct sfp_bus *bus)
{
	struct phy_device *phydev = upstream;

	if (phydev->attached_dev)
		phydev->attached_dev->sfp_bus = bus;
	phydev->sfp_bus_attached = true;
}
EXPORT_SYMBOL(phy_sfp_attach);

/**
 * phy_sfp_detach - detach the SFP bus from the PHY upstream network device
 * @upstream: pointer to the phy device
 * @bus: sfp bus representing cage being attached
 *
 * This is used to fill in the sfp_upstream_ops .detach member.
 */
void phy_sfp_detach(void *upstream, struct sfp_bus *bus)
{
	struct phy_device *phydev = upstream;

	if (phydev->attached_dev)
		phydev->attached_dev->sfp_bus = NULL;
	phydev->sfp_bus_attached = false;
}
EXPORT_SYMBOL(phy_sfp_detach);

/**
 * phy_sfp_probe - probe for a SFP cage attached to this PHY device
 * @phydev: Pointer to phy_device
 * @ops: SFP's upstream operations
 */
int phy_sfp_probe(struct phy_device *phydev,
		  const struct sfp_upstream_ops *ops)
{
	struct sfp_bus *bus;
	int ret;

	if (phydev->mdio.dev.fwnode) {
		bus = sfp_bus_find_fwnode(phydev->mdio.dev.fwnode);
		if (IS_ERR(bus))
			return PTR_ERR(bus);

		phydev->sfp_bus = bus;

		ret = sfp_bus_add_upstream(bus, phydev, ops);
		sfp_bus_put(bus);
	}
	return 0;
}
EXPORT_SYMBOL(phy_sfp_probe);

/**
 * phy_attach_direct - attach a network device to a given PHY device pointer
 * @dev: network device to attach
 * @phydev: Pointer to phy_device to attach
 * @flags: PHY device's dev_flags
 * @interface: PHY device's interface
 *
 * Description: Called by drivers to attach to a particular PHY
 *     device. The phy_device is found, and properly hooked up
 *     to the phy_driver.  If no driver is attached, then a
 *     generic driver is used.  The phy_device is given a ptr to
 *     the attaching device, and given a callback for link status
 *     change.  The phy_device is returned to the attaching driver.
 *     This function takes a reference on the phy device.
 */
int phy_attach_direct(struct net_device *dev, struct phy_device *phydev,
		      u32 flags, phy_interface_t interface)
{
	struct mii_bus *bus = phydev->mdio.bus;
	struct device *d = &phydev->mdio.dev;
	struct module *ndev_owner = NULL;
	bool using_genphy = false;
	int err;

	/* For Ethernet device drivers that register their own MDIO bus, we
	 * will have bus->owner match ndev_mod, so we do not want to increment
	 * our own module->refcnt here, otherwise we would not be able to
	 * unload later on.
	 */
	if (dev)
		ndev_owner = dev->dev.parent->driver->owner;
	if (ndev_owner != bus->owner && !try_module_get(bus->owner)) {
		phydev_err(phydev, "failed to get the bus module\n");
		return -EIO;
	}

	get_device(d);

	/* Assume that if there is no driver, that it doesn't
	 * exist, and we should use the genphy driver.
	 */
	if (!d->driver) {
		if (phydev->is_c45)
			d->driver = &genphy_c45_driver.mdiodrv.driver;
		else
			d->driver = &genphy_driver.mdiodrv.driver;

		using_genphy = true;
	}

	if (!try_module_get(d->driver->owner)) {
		phydev_err(phydev, "failed to get the device driver module\n");
		err = -EIO;
		goto error_put_device;
	}

	if (using_genphy) {
		err = d->driver->probe(d);
		if (err >= 0)
			err = device_bind_driver(d);

		if (err)
			goto error_module_put;
	}

	if (phydev->attached_dev) {
		dev_err(&dev->dev, "PHY already attached\n");
		err = -EBUSY;
		goto error;
	}

	phydev->phy_link_change = phy_link_change;
	if (dev) {
		phydev->attached_dev = dev;
		dev->phydev = phydev;

		if (phydev->sfp_bus_attached)
			dev->sfp_bus = phydev->sfp_bus;
	}

	/* Some Ethernet drivers try to connect to a PHY device before
	 * calling register_netdevice() -> netdev_register_kobject() and
	 * does the dev->dev.kobj initialization. Here we only check for
	 * success which indicates that the network device kobject is
	 * ready. Once we do that we still need to keep track of whether
	 * links were successfully set up or not for phy_detach() to
	 * remove them accordingly.
	 */
	phydev->sysfs_links = false;

	phy_sysfs_create_links(phydev);

	if (!phydev->attached_dev) {
		err = sysfs_create_file(&phydev->mdio.dev.kobj,
					&dev_attr_phy_standalone.attr);
		if (err)
			phydev_err(phydev, "error creating 'phy_standalone' sysfs entry\n");
	}

	phydev->dev_flags |= flags;

	phydev->interface = interface;

	phydev->state = PHY_READY;

	/* Initial carrier state is off as the phy is about to be
	 * (re)initialized.
	 */
	if (dev)
		netif_carrier_off(phydev->attached_dev);

	/* Do initial configuration here, now that
	 * we have certain key parameters
	 * (dev_flags and interface)
	 */
	err = phy_init_hw(phydev);
	if (err)
		goto error;

	phy_resume(phydev);
	phy_led_triggers_register(phydev);

	return err;

error:
	/* phy_detach() does all of the cleanup below */
	phy_detach(phydev);
	return err;

error_module_put:
	module_put(d->driver->owner);
error_put_device:
	put_device(d);
	if (ndev_owner != bus->owner)
		module_put(bus->owner);
	return err;
}
EXPORT_SYMBOL(phy_attach_direct);

/**
 * phy_attach - attach a network device to a particular PHY device
 * @dev: network device to attach
 * @bus_id: Bus ID of PHY device to attach
 * @interface: PHY device's interface
 *
 * Description: Same as phy_attach_direct() except that a PHY bus_id
 *     string is passed instead of a pointer to a struct phy_device.
 */
struct phy_device *phy_attach(struct net_device *dev, const char *bus_id,
			      phy_interface_t interface)
{
	struct bus_type *bus = &mdio_bus_type;
	struct phy_device *phydev;
	struct device *d;
	int rc;

	if (!dev)
		return ERR_PTR(-EINVAL);

	/* Search the list of PHY devices on the mdio bus for the
	 * PHY with the requested name
	 */
	d = bus_find_device_by_name(bus, NULL, bus_id);
	if (!d) {
		pr_err("PHY %s not found\n", bus_id);
		return ERR_PTR(-ENODEV);
	}
	phydev = to_phy_device(d);

	rc = phy_attach_direct(dev, phydev, phydev->dev_flags, interface);
	put_device(d);
	if (rc)
		return ERR_PTR(rc);

	return phydev;
}
EXPORT_SYMBOL(phy_attach);

static bool phy_driver_is_genphy_kind(struct phy_device *phydev,
				      struct device_driver *driver)
{
	struct device *d = &phydev->mdio.dev;
	bool ret = false;

	if (!phydev->drv)
		return ret;

	get_device(d);
	ret = d->driver == driver;
	put_device(d);

	return ret;
}

bool phy_driver_is_genphy(struct phy_device *phydev)
{
	return phy_driver_is_genphy_kind(phydev,
					 &genphy_driver.mdiodrv.driver);
}
EXPORT_SYMBOL_GPL(phy_driver_is_genphy);

bool phy_driver_is_genphy_10g(struct phy_device *phydev)
{
	return phy_driver_is_genphy_kind(phydev,
					 &genphy_c45_driver.mdiodrv.driver);
}
EXPORT_SYMBOL_GPL(phy_driver_is_genphy_10g);

/**
 * phy_detach - detach a PHY device from its network device
 * @phydev: target phy_device struct
 *
 * This detaches the phy device from its network device and the phy
 * driver, and drops the reference count taken in phy_attach_direct().
 */
void phy_detach(struct phy_device *phydev)
{
	struct net_device *dev = phydev->attached_dev;
	struct module *ndev_owner = NULL;
	struct mii_bus *bus;

	if (phydev->sysfs_links) {
		if (dev)
			sysfs_remove_link(&dev->dev.kobj, "phydev");
		sysfs_remove_link(&phydev->mdio.dev.kobj, "attached_dev");
	}

	if (!phydev->attached_dev)
		sysfs_remove_file(&phydev->mdio.dev.kobj,
				  &dev_attr_phy_standalone.attr);

	phy_suspend(phydev);
	if (dev) {
		phydev->attached_dev->phydev = NULL;
		phydev->attached_dev = NULL;
	}
	phydev->phylink = NULL;

	phy_led_triggers_unregister(phydev);

	module_put(phydev->mdio.dev.driver->owner);

	/* If the device had no specific driver before (i.e. - it
	 * was using the generic driver), we unbind the device
	 * from the generic driver so that there's a chance a
	 * real driver could be loaded
	 */
	if (phy_driver_is_genphy(phydev) ||
	    phy_driver_is_genphy_10g(phydev))
		device_release_driver(&phydev->mdio.dev);

	/*
	 * The phydev might go away on the put_device() below, so avoid
	 * a use-after-free bug by reading the underlying bus first.
	 */
	bus = phydev->mdio.bus;

	put_device(&phydev->mdio.dev);
	if (dev)
		ndev_owner = dev->dev.parent->driver->owner;
	if (ndev_owner != bus->owner)
		module_put(bus->owner);

	/* Assert the reset signal */
	phy_device_reset(phydev, 1);
}
EXPORT_SYMBOL(phy_detach);

int phy_suspend(struct phy_device *phydev)
{
	struct phy_driver *phydrv = to_phy_driver(phydev->mdio.dev.driver);
	struct net_device *netdev = phydev->attached_dev;
	struct ethtool_wolinfo wol = { .cmd = ETHTOOL_GWOL };
	int ret = 0;

	/* If the device has WOL enabled, we cannot suspend the PHY */
	phy_ethtool_get_wol(phydev, &wol);
	if (wol.wolopts || (netdev && netdev->wol_enabled))
		return -EBUSY;

	if (phydev->drv && phydrv->suspend)
		ret = phydrv->suspend(phydev);

	if (ret)
		return ret;

	phydev->suspended = true;

	return ret;
}
EXPORT_SYMBOL(phy_suspend);

int __phy_resume(struct phy_device *phydev)
{
	struct phy_driver *phydrv = to_phy_driver(phydev->mdio.dev.driver);
	int ret = 0;

	WARN_ON(!mutex_is_locked(&phydev->lock));

	if (phydev->drv && phydrv->resume)
		ret = phydrv->resume(phydev);

	if (ret)
		return ret;

	phydev->suspended = false;

	return ret;
}
EXPORT_SYMBOL(__phy_resume);

int phy_resume(struct phy_device *phydev)
{
	int ret;

	mutex_lock(&phydev->lock);
	ret = __phy_resume(phydev);
	mutex_unlock(&phydev->lock);

	return ret;
}
EXPORT_SYMBOL(phy_resume);

int phy_loopback(struct phy_device *phydev, bool enable)
{
	struct phy_driver *phydrv = to_phy_driver(phydev->mdio.dev.driver);
	int ret = 0;

	mutex_lock(&phydev->lock);

	if (enable && phydev->loopback_enabled) {
		ret = -EBUSY;
		goto out;
	}

	if (!enable && !phydev->loopback_enabled) {
		ret = -EINVAL;
		goto out;
	}

	if (phydev->drv && phydrv->set_loopback)
		ret = phydrv->set_loopback(phydev, enable);
	else
		ret = -EOPNOTSUPP;

	if (ret)
		goto out;

	phydev->loopback_enabled = enable;

out:
	mutex_unlock(&phydev->lock);
	return ret;
}
EXPORT_SYMBOL(phy_loopback);

/**
 * phy_reset_after_clk_enable - perform a PHY reset if needed
 * @phydev: target phy_device struct
 *
 * Description: Some PHYs are known to need a reset after their refclk was
 *   enabled. This function evaluates the flags and perform the reset if it's
 *   needed. Returns < 0 on error, 0 if the phy wasn't reset and 1 if the phy
 *   was reset.
 */
int phy_reset_after_clk_enable(struct phy_device *phydev)
{
	if (!phydev || !phydev->drv)
		return -ENODEV;

	if (phydev->drv->flags & PHY_RST_AFTER_CLK_EN) {
		phy_device_reset(phydev, 1);
		phy_device_reset(phydev, 0);
		return 1;
	}

	return 0;
}
EXPORT_SYMBOL(phy_reset_after_clk_enable);

/* Generic PHY support and helper functions */

/**
 * genphy_config_advert - sanitize and advertise auto-negotiation parameters
 * @phydev: target phy_device struct
 *
 * Description: Writes MII_ADVERTISE with the appropriate values,
 *   after sanitizing the values to make sure we only advertise
 *   what is supported.  Returns < 0 on error, 0 if the PHY's advertisement
 *   hasn't changed, and > 0 if it has changed.
 */
static int genphy_config_advert(struct phy_device *phydev)
{
	int err, bmsr, changed = 0;
	u32 adv;

	/* Only allow advertising what this PHY supports */
	linkmode_and(phydev->advertising, phydev->advertising,
		     phydev->supported);

	adv = linkmode_adv_to_mii_adv_t(phydev->advertising);

	/* Setup standard advertisement */
	err = phy_modify_changed(phydev, MII_ADVERTISE,
				 ADVERTISE_ALL | ADVERTISE_100BASE4 |
				 ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM,
				 adv);
	if (err < 0)
		return err;
	if (err > 0)
		changed = 1;

	bmsr = phy_read(phydev, MII_BMSR);
	if (bmsr < 0)
		return bmsr;

	/* Per 802.3-2008, Section 22.2.4.2.16 Extended status all
	 * 1000Mbits/sec capable PHYs shall have the BMSR_ESTATEN bit set to a
	 * logical 1.
	 */
	if (!(bmsr & BMSR_ESTATEN))
		return changed;

	adv = linkmode_adv_to_mii_ctrl1000_t(phydev->advertising);

	err = phy_modify_changed(phydev, MII_CTRL1000,
				 ADVERTISE_1000FULL | ADVERTISE_1000HALF,
				 adv);
	if (err < 0)
		return err;
	if (err > 0)
		changed = 1;

	return changed;
}

/**
 * genphy_c37_config_advert - sanitize and advertise auto-negotiation parameters
 * @phydev: target phy_device struct
 *
 * Description: Writes MII_ADVERTISE with the appropriate values,
 *   after sanitizing the values to make sure we only advertise
 *   what is supported.  Returns < 0 on error, 0 if the PHY's advertisement
 *   hasn't changed, and > 0 if it has changed. This function is intended
 *   for Clause 37 1000Base-X mode.
 */
static int genphy_c37_config_advert(struct phy_device *phydev)
{
	u16 adv = 0;

	/* Only allow advertising what this PHY supports */
	linkmode_and(phydev->advertising, phydev->advertising,
		     phydev->supported);

	if (linkmode_test_bit(ETHTOOL_LINK_MODE_1000baseX_Full_BIT,
			      phydev->advertising))
		adv |= ADVERTISE_1000XFULL;
	if (linkmode_test_bit(ETHTOOL_LINK_MODE_Pause_BIT,
			      phydev->advertising))
		adv |= ADVERTISE_1000XPAUSE;
	if (linkmode_test_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT,
			      phydev->advertising))
		adv |= ADVERTISE_1000XPSE_ASYM;

	return phy_modify_changed(phydev, MII_ADVERTISE,
				  ADVERTISE_1000XFULL | ADVERTISE_1000XPAUSE |
				  ADVERTISE_1000XHALF | ADVERTISE_1000XPSE_ASYM,
				  adv);
}

/**
 * genphy_config_eee_advert - disable unwanted eee mode advertisement
 * @phydev: target phy_device struct
 *
 * Description: Writes MDIO_AN_EEE_ADV after disabling unsupported energy
 *   efficent ethernet modes. Returns 0 if the PHY's advertisement hasn't
 *   changed, and 1 if it has changed.
 */
int genphy_config_eee_advert(struct phy_device *phydev)
{
	int err;

	/* Nothing to disable */
	if (!phydev->eee_broken_modes)
		return 0;

	err = phy_modify_mmd_changed(phydev, MDIO_MMD_AN, MDIO_AN_EEE_ADV,
				     phydev->eee_broken_modes, 0);
	/* If the call failed, we assume that EEE is not supported */
	return err < 0 ? 0 : err;
}
EXPORT_SYMBOL(genphy_config_eee_advert);

/**
 * genphy_setup_forced - configures/forces speed/duplex from @phydev
 * @phydev: target phy_device struct
 *
 * Description: Configures MII_BMCR to force speed/duplex
 *   to the values in phydev. Assumes that the values are valid.
 *   Please see phy_sanitize_settings().
 */
int genphy_setup_forced(struct phy_device *phydev)
{
	u16 ctl = 0;

	phydev->pause = 0;
	phydev->asym_pause = 0;

	if (SPEED_1000 == phydev->speed)
		ctl |= BMCR_SPEED1000;
	else if (SPEED_100 == phydev->speed)
		ctl |= BMCR_SPEED100;

	if (DUPLEX_FULL == phydev->duplex)
		ctl |= BMCR_FULLDPLX;

	return phy_modify(phydev, MII_BMCR,
			  ~(BMCR_LOOPBACK | BMCR_ISOLATE | BMCR_PDOWN), ctl);
}
EXPORT_SYMBOL(genphy_setup_forced);

/**
 * genphy_restart_aneg - Enable and Restart Autonegotiation
 * @phydev: target phy_device struct
 */
int genphy_restart_aneg(struct phy_device *phydev)
{
	/* Don't isolate the PHY if we're negotiating */
	return phy_modify(phydev, MII_BMCR, BMCR_ISOLATE,
			  BMCR_ANENABLE | BMCR_ANRESTART);
}
EXPORT_SYMBOL(genphy_restart_aneg);

/**
 * genphy_check_and_restart_aneg - Enable and restart auto-negotiation
 * @phydev: target phy_device struct
 * @restart: whether aneg restart is requested
 *
 * Check, and restart auto-negotiation if needed.
 */
int genphy_check_and_restart_aneg(struct phy_device *phydev, bool restart)
{
	int ret;

	if (!restart) {
		/* Advertisement hasn't changed, but maybe aneg was never on to
		 * begin with?  Or maybe phy was isolated?
		 */
		ret = phy_read(phydev, MII_BMCR);
		if (ret < 0)
			return ret;

		if (!(ret & BMCR_ANENABLE) || (ret & BMCR_ISOLATE))
			restart = true;
	}

	if (restart)
		return genphy_restart_aneg(phydev);

	return 0;
}
EXPORT_SYMBOL(genphy_check_and_restart_aneg);

/**
 * __genphy_config_aneg - restart auto-negotiation or write BMCR
 * @phydev: target phy_device struct
 * @changed: whether autoneg is requested
 *
 * Description: If auto-negotiation is enabled, we configure the
 *   advertising, and then restart auto-negotiation.  If it is not
 *   enabled, then we write the BMCR.
 */
int __genphy_config_aneg(struct phy_device *phydev, bool changed)
{
	int err;

	if (genphy_config_eee_advert(phydev))
		changed = true;

	if (AUTONEG_ENABLE != phydev->autoneg)
		return genphy_setup_forced(phydev);

	err = genphy_config_advert(phydev);
	if (err < 0) /* error */
		return err;
	else if (err)
		changed = true;

	return genphy_check_and_restart_aneg(phydev, changed);
}
EXPORT_SYMBOL(__genphy_config_aneg);

/**
 * genphy_c37_config_aneg - restart auto-negotiation or write BMCR
 * @phydev: target phy_device struct
 *
 * Description: If auto-negotiation is enabled, we configure the
 *   advertising, and then restart auto-negotiation.  If it is not
 *   enabled, then we write the BMCR. This function is intended
 *   for use with Clause 37 1000Base-X mode.
 */
int genphy_c37_config_aneg(struct phy_device *phydev)
{
	int err, changed;

	if (phydev->autoneg != AUTONEG_ENABLE)
		return genphy_setup_forced(phydev);

	err = phy_modify(phydev, MII_BMCR, BMCR_SPEED1000 | BMCR_SPEED100,
			 BMCR_SPEED1000);
	if (err)
		return err;

	changed = genphy_c37_config_advert(phydev);
	if (changed < 0) /* error */
		return changed;

	if (!changed) {
		/* Advertisement hasn't changed, but maybe aneg was never on to
		 * begin with?  Or maybe phy was isolated?
		 */
		int ctl = phy_read(phydev, MII_BMCR);

		if (ctl < 0)
			return ctl;

		if (!(ctl & BMCR_ANENABLE) || (ctl & BMCR_ISOLATE))
			changed = 1; /* do restart aneg */
	}

	/* Only restart aneg if we are advertising something different
	 * than we were before.
	 */
	if (changed > 0)
		return genphy_restart_aneg(phydev);

	return 0;
}
EXPORT_SYMBOL(genphy_c37_config_aneg);

/**
 * genphy_aneg_done - return auto-negotiation status
 * @phydev: target phy_device struct
 *
 * Description: Reads the status register and returns 0 either if
 *   auto-negotiation is incomplete, or if there was an error.
 *   Returns BMSR_ANEGCOMPLETE if auto-negotiation is done.
 */
int genphy_aneg_done(struct phy_device *phydev)
{
	int retval = phy_read(phydev, MII_BMSR);

	return (retval < 0) ? retval : (retval & BMSR_ANEGCOMPLETE);
}
EXPORT_SYMBOL(genphy_aneg_done);

/**
 * genphy_update_link - update link status in @phydev
 * @phydev: target phy_device struct
 *
 * Description: Update the value in phydev->link to reflect the
 *   current link value.  In order to do this, we need to read
 *   the status register twice, keeping the second value.
 */
int genphy_update_link(struct phy_device *phydev)
{
	int status = 0, bmcr;

	bmcr = phy_read(phydev, MII_BMCR);
	if (bmcr < 0)
		return bmcr;

	/* Autoneg is being started, therefore disregard BMSR value and
	 * report link as down.
	 */
	if (bmcr & BMCR_ANRESTART)
		goto done;

	/* The link state is latched low so that momentary link
	 * drops can be detected. Do not double-read the status
	 * in polling mode to detect such short link drops.
	 */
	if (!phy_polling_mode(phydev)) {
		status = phy_read(phydev, MII_BMSR);
		if (status < 0)
			return status;
		else if (status & BMSR_LSTATUS)
			goto done;
	}

	/* Read link and autonegotiation status */
	status = phy_read(phydev, MII_BMSR);
	if (status < 0)
		return status;
done:
	phydev->link = status & BMSR_LSTATUS ? 1 : 0;
	phydev->autoneg_complete = status & BMSR_ANEGCOMPLETE ? 1 : 0;

	/* Consider the case that autoneg was started and "aneg complete"
	 * bit has been reset, but "link up" bit not yet.
	 */
	if (phydev->autoneg == AUTONEG_ENABLE && !phydev->autoneg_complete)
		phydev->link = 0;

	return 0;
}
EXPORT_SYMBOL(genphy_update_link);

int genphy_read_lpa(struct phy_device *phydev)
{
	int lpa, lpagb;

	if (phydev->autoneg == AUTONEG_ENABLE) {
		if (!phydev->autoneg_complete) {
			mii_stat1000_mod_linkmode_lpa_t(phydev->lp_advertising,
							0);
			mii_lpa_mod_linkmode_lpa_t(phydev->lp_advertising, 0);
			return 0;
		}

		if (phydev->is_gigabit_capable) {
			lpagb = phy_read(phydev, MII_STAT1000);
			if (lpagb < 0)
				return lpagb;

			if (lpagb & LPA_1000MSFAIL) {
				int adv = phy_read(phydev, MII_CTRL1000);

				if (adv < 0)
					return adv;

				if (adv & CTL1000_ENABLE_MASTER)
					phydev_err(phydev, "Master/Slave resolution failed, maybe conflicting manual settings?\n");
				else
					phydev_err(phydev, "Master/Slave resolution failed\n");
				return -ENOLINK;
			}

			mii_stat1000_mod_linkmode_lpa_t(phydev->lp_advertising,
							lpagb);
		}

		lpa = phy_read(phydev, MII_LPA);
		if (lpa < 0)
			return lpa;

		mii_lpa_mod_linkmode_lpa_t(phydev->lp_advertising, lpa);
	} else {
		linkmode_zero(phydev->lp_advertising);
	}

	return 0;
}
EXPORT_SYMBOL(genphy_read_lpa);

/**
 * genphy_read_status_fixed - read the link parameters for !aneg mode
 * @phydev: target phy_device struct
 *
 * Read the current duplex and speed state for a PHY operating with
 * autonegotiation disabled.
 */
int genphy_read_status_fixed(struct phy_device *phydev)
{
	int bmcr = phy_read(phydev, MII_BMCR);

	if (bmcr < 0)
		return bmcr;

	if (bmcr & BMCR_FULLDPLX)
		phydev->duplex = DUPLEX_FULL;
	else
		phydev->duplex = DUPLEX_HALF;

	if (bmcr & BMCR_SPEED1000)
		phydev->speed = SPEED_1000;
	else if (bmcr & BMCR_SPEED100)
		phydev->speed = SPEED_100;
	else
		phydev->speed = SPEED_10;

	return 0;
}
EXPORT_SYMBOL(genphy_read_status_fixed);

/**
 * genphy_read_status - check the link status and update current link state
 * @phydev: target phy_device struct
 *
 * Description: Check the link, then figure out the current state
 *   by comparing what we advertise with what the link partner
 *   advertises.  Start by checking the gigabit possibilities,
 *   then move on to 10/100.
 */
int genphy_read_status(struct phy_device *phydev)
{
	int err, old_link = phydev->link;

	/* Update the link, but return if there was an error */
	err = genphy_update_link(phydev);
	if (err)
		return err;

	/* why bother the PHY if nothing can have changed */
	if (phydev->autoneg == AUTONEG_ENABLE && old_link && phydev->link)
		return 0;

	phydev->speed = SPEED_UNKNOWN;
	phydev->duplex = DUPLEX_UNKNOWN;
	phydev->pause = 0;
	phydev->asym_pause = 0;

	err = genphy_read_lpa(phydev);
	if (err < 0)
		return err;

	if (phydev->autoneg == AUTONEG_ENABLE && phydev->autoneg_complete) {
		phy_resolve_aneg_linkmode(phydev);
	} else if (phydev->autoneg == AUTONEG_DISABLE) {
		err = genphy_read_status_fixed(phydev);
		if (err < 0)
			return err;
	}

	return 0;
}
EXPORT_SYMBOL(genphy_read_status);

/**
 * genphy_c37_read_status - check the link status and update current link state
 * @phydev: target phy_device struct
 *
 * Description: Check the link, then figure out the current state
 *   by comparing what we advertise with what the link partner
 *   advertises. This function is for Clause 37 1000Base-X mode.
 */
int genphy_c37_read_status(struct phy_device *phydev)
{
	int lpa, err, old_link = phydev->link;

	/* Update the link, but return if there was an error */
	err = genphy_update_link(phydev);
	if (err)
		return err;

	/* why bother the PHY if nothing can have changed */
	if (phydev->autoneg == AUTONEG_ENABLE && old_link && phydev->link)
		return 0;

	phydev->duplex = DUPLEX_UNKNOWN;
	phydev->pause = 0;
	phydev->asym_pause = 0;

	if (phydev->autoneg == AUTONEG_ENABLE && phydev->autoneg_complete) {
		lpa = phy_read(phydev, MII_LPA);
		if (lpa < 0)
			return lpa;

		linkmode_mod_bit(ETHTOOL_LINK_MODE_Autoneg_BIT,
				 phydev->lp_advertising, lpa & LPA_LPACK);
		linkmode_mod_bit(ETHTOOL_LINK_MODE_1000baseX_Full_BIT,
				 phydev->lp_advertising, lpa & LPA_1000XFULL);
		linkmode_mod_bit(ETHTOOL_LINK_MODE_Pause_BIT,
				 phydev->lp_advertising, lpa & LPA_1000XPAUSE);
		linkmode_mod_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT,
				 phydev->lp_advertising,
				 lpa & LPA_1000XPAUSE_ASYM);

		phy_resolve_aneg_linkmode(phydev);
	} else if (phydev->autoneg == AUTONEG_DISABLE) {
		int bmcr = phy_read(phydev, MII_BMCR);

		if (bmcr < 0)
			return bmcr;

		if (bmcr & BMCR_FULLDPLX)
			phydev->duplex = DUPLEX_FULL;
		else
			phydev->duplex = DUPLEX_HALF;
	}

	return 0;
}
EXPORT_SYMBOL(genphy_c37_read_status);

/**
 * genphy_soft_reset - software reset the PHY via BMCR_RESET bit
 * @phydev: target phy_device struct
 *
 * Description: Perform a software PHY reset using the standard
 * BMCR_RESET bit and poll for the reset bit to be cleared.
 *
 * Returns: 0 on success, < 0 on failure
 */
int genphy_soft_reset(struct phy_device *phydev)
{
	u16 res = BMCR_RESET;
	int ret;

	if (phydev->autoneg == AUTONEG_ENABLE)
		res |= BMCR_ANRESTART;

	ret = phy_modify(phydev, MII_BMCR, BMCR_ISOLATE, res);
	if (ret < 0)
		return ret;

	ret = phy_poll_reset(phydev);
	if (ret)
		return ret;

	/* BMCR may be reset to defaults */
	if (phydev->autoneg == AUTONEG_DISABLE)
		ret = genphy_setup_forced(phydev);

	return ret;
}
EXPORT_SYMBOL(genphy_soft_reset);

/**
 * genphy_read_abilities - read PHY abilities from Clause 22 registers
 * @phydev: target phy_device struct
 *
 * Description: Reads the PHY's abilities and populates
 * phydev->supported accordingly.
 *
 * Returns: 0 on success, < 0 on failure
 */
int genphy_read_abilities(struct phy_device *phydev)
{
	int val;

	linkmode_set_bit_array(phy_basic_ports_array,
			       ARRAY_SIZE(phy_basic_ports_array),
			       phydev->supported);

	val = phy_read(phydev, MII_BMSR);
	if (val < 0)
		return val;

	linkmode_mod_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, phydev->supported,
			 val & BMSR_ANEGCAPABLE);

	linkmode_mod_bit(ETHTOOL_LINK_MODE_100baseT_Full_BIT, phydev->supported,
			 val & BMSR_100FULL);
	linkmode_mod_bit(ETHTOOL_LINK_MODE_100baseT_Half_BIT, phydev->supported,
			 val & BMSR_100HALF);
	linkmode_mod_bit(ETHTOOL_LINK_MODE_10baseT_Full_BIT, phydev->supported,
			 val & BMSR_10FULL);
	linkmode_mod_bit(ETHTOOL_LINK_MODE_10baseT_Half_BIT, phydev->supported,
			 val & BMSR_10HALF);

	if (val & BMSR_ESTATEN) {
		val = phy_read(phydev, MII_ESTATUS);
		if (val < 0)
			return val;

		linkmode_mod_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT,
				 phydev->supported, val & ESTATUS_1000_TFULL);
		linkmode_mod_bit(ETHTOOL_LINK_MODE_1000baseT_Half_BIT,
				 phydev->supported, val & ESTATUS_1000_THALF);
		linkmode_mod_bit(ETHTOOL_LINK_MODE_1000baseX_Full_BIT,
				 phydev->supported, val & ESTATUS_1000_XFULL);
	}

	return 0;
}
EXPORT_SYMBOL(genphy_read_abilities);

/* This is used for the phy device which doesn't support the MMD extended
 * register access, but it does have side effect when we are trying to access
 * the MMD register via indirect method.
 */
int genphy_read_mmd_unsupported(struct phy_device *phdev, int devad, u16 regnum)
{
	return -EOPNOTSUPP;
}
EXPORT_SYMBOL(genphy_read_mmd_unsupported);

int genphy_write_mmd_unsupported(struct phy_device *phdev, int devnum,
				 u16 regnum, u16 val)
{
	return -EOPNOTSUPP;
}
EXPORT_SYMBOL(genphy_write_mmd_unsupported);

int genphy_suspend(struct phy_device *phydev)
{
	return phy_set_bits(phydev, MII_BMCR, BMCR_PDOWN);
}
EXPORT_SYMBOL(genphy_suspend);

int genphy_resume(struct phy_device *phydev)
{
	return phy_clear_bits(phydev, MII_BMCR, BMCR_PDOWN);
}
EXPORT_SYMBOL(genphy_resume);

int genphy_loopback(struct phy_device *phydev, bool enable)
{
	return phy_modify(phydev, MII_BMCR, BMCR_LOOPBACK,
			  enable ? BMCR_LOOPBACK : 0);
}
EXPORT_SYMBOL(genphy_loopback);

/**
 * phy_remove_link_mode - Remove a supported link mode
 * @phydev: phy_device structure to remove link mode from
 * @link_mode: Link mode to be removed
 *
 * Description: Some MACs don't support all link modes which the PHY
 * does.  e.g. a 1G MAC often does not support 1000Half. Add a helper
 * to remove a link mode.
 */
void phy_remove_link_mode(struct phy_device *phydev, u32 link_mode)
{
	linkmode_clear_bit(link_mode, phydev->supported);
	phy_advertise_supported(phydev);
}
EXPORT_SYMBOL(phy_remove_link_mode);

static void phy_copy_pause_bits(unsigned long *dst, unsigned long *src)
{
	linkmode_mod_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, dst,
		linkmode_test_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, src));
	linkmode_mod_bit(ETHTOOL_LINK_MODE_Pause_BIT, dst,
		linkmode_test_bit(ETHTOOL_LINK_MODE_Pause_BIT, src));
}

/**
 * phy_advertise_supported - Advertise all supported modes
 * @phydev: target phy_device struct
 *
 * Description: Called to advertise all supported modes, doesn't touch
 * pause mode advertising.
 */
void phy_advertise_supported(struct phy_device *phydev)
{
	__ETHTOOL_DECLARE_LINK_MODE_MASK(new);

	linkmode_copy(new, phydev->supported);
	phy_copy_pause_bits(new, phydev->advertising);
	linkmode_copy(phydev->advertising, new);
}
EXPORT_SYMBOL(phy_advertise_supported);

/**
 * phy_support_sym_pause - Enable support of symmetrical pause
 * @phydev: target phy_device struct
 *
 * Description: Called by the MAC to indicate is supports symmetrical
 * Pause, but not asym pause.
 */
void phy_support_sym_pause(struct phy_device *phydev)
{
	linkmode_clear_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, phydev->supported);
	phy_copy_pause_bits(phydev->advertising, phydev->supported);
}
EXPORT_SYMBOL(phy_support_sym_pause);

/**
 * phy_support_asym_pause - Enable support of asym pause
 * @phydev: target phy_device struct
 *
 * Description: Called by the MAC to indicate is supports Asym Pause.
 */
void phy_support_asym_pause(struct phy_device *phydev)
{
	phy_copy_pause_bits(phydev->advertising, phydev->supported);
}
EXPORT_SYMBOL(phy_support_asym_pause);

/**
 * phy_set_sym_pause - Configure symmetric Pause
 * @phydev: target phy_device struct
 * @rx: Receiver Pause is supported
 * @tx: Transmit Pause is supported
 * @autoneg: Auto neg should be used
 *
 * Description: Configure advertised Pause support depending on if
 * receiver pause and pause auto neg is supported. Generally called
 * from the set_pauseparam .ndo.
 */
void phy_set_sym_pause(struct phy_device *phydev, bool rx, bool tx,
		       bool autoneg)
{
	linkmode_clear_bit(ETHTOOL_LINK_MODE_Pause_BIT, phydev->supported);

	if (rx && tx && autoneg)
		linkmode_set_bit(ETHTOOL_LINK_MODE_Pause_BIT,
				 phydev->supported);

	linkmode_copy(phydev->advertising, phydev->supported);
}
EXPORT_SYMBOL(phy_set_sym_pause);

/**
 * phy_set_asym_pause - Configure Pause and Asym Pause
 * @phydev: target phy_device struct
 * @rx: Receiver Pause is supported
 * @tx: Transmit Pause is supported
 *
 * Description: Configure advertised Pause support depending on if
 * transmit and receiver pause is supported. If there has been a
 * change in adverting, trigger a new autoneg. Generally called from
 * the set_pauseparam .ndo.
 */
void phy_set_asym_pause(struct phy_device *phydev, bool rx, bool tx)
{
	__ETHTOOL_DECLARE_LINK_MODE_MASK(oldadv);

	linkmode_copy(oldadv, phydev->advertising);

	linkmode_clear_bit(ETHTOOL_LINK_MODE_Pause_BIT,
			   phydev->advertising);
	linkmode_clear_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT,
			   phydev->advertising);

	if (rx) {
		linkmode_set_bit(ETHTOOL_LINK_MODE_Pause_BIT,
				 phydev->advertising);
		linkmode_set_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT,
				 phydev->advertising);
	}

	if (tx)
		linkmode_change_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT,
				    phydev->advertising);

	if (!linkmode_equal(oldadv, phydev->advertising) &&
	    phydev->autoneg)
		phy_start_aneg(phydev);
}
EXPORT_SYMBOL(phy_set_asym_pause);

/**
 * phy_validate_pause - Test if the PHY/MAC support the pause configuration
 * @phydev: phy_device struct
 * @pp: requested pause configuration
 *
 * Description: Test if the PHY/MAC combination supports the Pause
 * configuration the user is requesting. Returns True if it is
 * supported, false otherwise.
 */
bool phy_validate_pause(struct phy_device *phydev,
			struct ethtool_pauseparam *pp)
{
	if (!linkmode_test_bit(ETHTOOL_LINK_MODE_Pause_BIT,
			       phydev->supported) && pp->rx_pause)
		return false;

	if (!linkmode_test_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT,
			       phydev->supported) &&
	    pp->rx_pause != pp->tx_pause)
		return false;

	return true;
}
EXPORT_SYMBOL(phy_validate_pause);

static bool phy_drv_supports_irq(struct phy_driver *phydrv)
{
	return phydrv->config_intr && phydrv->ack_interrupt;
}

/**
 * phy_probe - probe and init a PHY device
 * @dev: device to probe and init
 *
 * Description: Take care of setting up the phy_device structure,
 *   set the state to READY (the driver's init function should
 *   set it to STARTING if needed).
 */
static int phy_probe(struct device *dev)
{
	struct phy_device *phydev = to_phy_device(dev);
	struct device_driver *drv = phydev->mdio.dev.driver;
	struct phy_driver *phydrv = to_phy_driver(drv);
	int err = 0;

	phydev->drv = phydrv;

	/* Disable the interrupt if the PHY doesn't support it
	 * but the interrupt is still a valid one
	 */
	 if (!phy_drv_supports_irq(phydrv) && phy_interrupt_is_valid(phydev))
		phydev->irq = PHY_POLL;

	if (phydrv->flags & PHY_IS_INTERNAL)
		phydev->is_internal = true;

	mutex_lock(&phydev->lock);

	if (phydev->drv->probe) {
		/* Deassert the reset signal */
		phy_device_reset(phydev, 0);

		err = phydev->drv->probe(phydev);
		if (err) {
			/* Assert the reset signal */
			phy_device_reset(phydev, 1);
			goto out;
		}
	}

	/* Start out supporting everything. Eventually,
	 * a controller will attach, and may modify one
	 * or both of these values
	 */
	if (phydrv->features) {
		linkmode_copy(phydev->supported, phydrv->features);
	} else if (phydrv->get_features) {
		err = phydrv->get_features(phydev);
	} else if (phydev->is_c45) {
		err = genphy_c45_pma_read_abilities(phydev);
	} else {
		err = genphy_read_abilities(phydev);
	}

	if (err)
		goto out;

	if (!linkmode_test_bit(ETHTOOL_LINK_MODE_Autoneg_BIT,
			       phydev->supported))
		phydev->autoneg = 0;

	if (linkmode_test_bit(ETHTOOL_LINK_MODE_1000baseT_Half_BIT,
			      phydev->supported))
		phydev->is_gigabit_capable = 1;
	if (linkmode_test_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT,
			      phydev->supported))
		phydev->is_gigabit_capable = 1;

	of_set_phy_supported(phydev);
	phy_advertise_supported(phydev);

	/* Get the EEE modes we want to prohibit. We will ask
	 * the PHY stop advertising these mode later on
	 */
	of_set_phy_eee_broken(phydev);

	/* The Pause Frame bits indicate that the PHY can support passing
	 * pause frames. During autonegotiation, the PHYs will determine if
	 * they should allow pause frames to pass.  The MAC driver should then
	 * use that result to determine whether to enable flow control via
	 * pause frames.
	 *
	 * Normally, PHY drivers should not set the Pause bits, and instead
	 * allow phylib to do that.  However, there may be some situations
	 * (e.g. hardware erratum) where the driver wants to set only one
	 * of these bits.
	 */
	if (!test_bit(ETHTOOL_LINK_MODE_Pause_BIT, phydev->supported) &&
	    !test_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, phydev->supported)) {
		linkmode_set_bit(ETHTOOL_LINK_MODE_Pause_BIT,
				 phydev->supported);
		linkmode_set_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT,
				 phydev->supported);
	}

	/* Set the state to READY by default */
	phydev->state = PHY_READY;

out:
	mutex_unlock(&phydev->lock);

	return err;
}

static int phy_remove(struct device *dev)
{
	struct phy_device *phydev = to_phy_device(dev);

	cancel_delayed_work_sync(&phydev->state_queue);

	mutex_lock(&phydev->lock);
	phydev->state = PHY_DOWN;
	mutex_unlock(&phydev->lock);

	sfp_bus_del_upstream(phydev->sfp_bus);
	phydev->sfp_bus = NULL;

	if (phydev->drv && phydev->drv->remove) {
		phydev->drv->remove(phydev);

		/* Assert the reset signal */
		phy_device_reset(phydev, 1);
	}
	phydev->drv = NULL;

	return 0;
}

/**
 * phy_driver_register - register a phy_driver with the PHY layer
 * @new_driver: new phy_driver to register
 * @owner: module owning this PHY
 */
int phy_driver_register(struct phy_driver *new_driver, struct module *owner)
{
	int retval;

	/* Either the features are hard coded, or dynamically
	 * determined. It cannot be both.
	 */
	if (WARN_ON(new_driver->features && new_driver->get_features)) {
		pr_err("%s: features and get_features must not both be set\n",
		       new_driver->name);
		return -EINVAL;
	}

	new_driver->mdiodrv.flags |= MDIO_DEVICE_IS_PHY;
	new_driver->mdiodrv.driver.name = new_driver->name;
	new_driver->mdiodrv.driver.bus = &mdio_bus_type;
	new_driver->mdiodrv.driver.probe = phy_probe;
	new_driver->mdiodrv.driver.remove = phy_remove;
	new_driver->mdiodrv.driver.owner = owner;

	retval = driver_register(&new_driver->mdiodrv.driver);
	if (retval) {
		pr_err("%s: Error %d in registering driver\n",
		       new_driver->name, retval);

		return retval;
	}

	pr_debug("%s: Registered new driver\n", new_driver->name);

	return 0;
}
EXPORT_SYMBOL(phy_driver_register);

int phy_drivers_register(struct phy_driver *new_driver, int n,
			 struct module *owner)
{
	int i, ret = 0;

	for (i = 0; i < n; i++) {
		ret = phy_driver_register(new_driver + i, owner);
		if (ret) {
			while (i-- > 0)
				phy_driver_unregister(new_driver + i);
			break;
		}
	}
	return ret;
}
EXPORT_SYMBOL(phy_drivers_register);

void phy_driver_unregister(struct phy_driver *drv)
{
	driver_unregister(&drv->mdiodrv.driver);
}
EXPORT_SYMBOL(phy_driver_unregister);

void phy_drivers_unregister(struct phy_driver *drv, int n)
{
	int i;

	for (i = 0; i < n; i++)
		phy_driver_unregister(drv + i);
}
EXPORT_SYMBOL(phy_drivers_unregister);

static struct phy_driver genphy_driver = {
	.phy_id		= 0xffffffff,
	.phy_id_mask	= 0xffffffff,
	.name		= "Generic PHY",
	.soft_reset	= genphy_no_soft_reset,
	.get_features	= genphy_read_abilities,
	.suspend	= genphy_suspend,
	.resume		= genphy_resume,
	.set_loopback   = genphy_loopback,
};

static int __init phy_init(void)
{
	int rc;

	rc = mdio_bus_init();
	if (rc)
		return rc;

	features_init();

	rc = phy_driver_register(&genphy_c45_driver, THIS_MODULE);
	if (rc)
		goto err_c45;

	rc = phy_driver_register(&genphy_driver, THIS_MODULE);
	if (rc) {
		phy_driver_unregister(&genphy_c45_driver);
err_c45:
		mdio_bus_exit();
	}

	return rc;
}

static void __exit phy_exit(void)
{
	phy_driver_unregister(&genphy_c45_driver);
	phy_driver_unregister(&genphy_driver);
	mdio_bus_exit();
}

subsys_initcall(phy_init);
module_exit(phy_exit);