1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
|
/* SPDX-License-Identifier: GPL-2.0-or-later */
/*
* linux/include/asm-arm/hardware/serial_amba.h
*
* Internal header file for AMBA serial ports
*
* Copyright (C) ARM Limited
* Copyright (C) 2000 Deep Blue Solutions Ltd.
*/
#ifndef ASM_ARM_HARDWARE_SERIAL_AMBA_H
#define ASM_ARM_HARDWARE_SERIAL_AMBA_H
#ifndef __ASSEMBLY__
#include <linux/bitfield.h>
#include <linux/bits.h>
#endif
#include <linux/types.h>
/* -------------------------------------------------------------------------------
* From AMBA UART (PL010) Block Specification
* -------------------------------------------------------------------------------
* UART Register Offsets.
*/
#define UART01x_DR 0x00 /* Data read or written from the interface. */
#define UART01x_RSR 0x04 /* Receive status register (Read). */
#define UART01x_ECR 0x04 /* Error clear register (Write). */
#define UART010_LCRH 0x08 /* Line control register, high byte. */
#define ST_UART011_DMAWM 0x08 /* DMA watermark configure register. */
#define UART010_LCRM 0x0C /* Line control register, middle byte. */
#define ST_UART011_TIMEOUT 0x0C /* Timeout period register. */
#define UART010_LCRL 0x10 /* Line control register, low byte. */
#define UART010_CR 0x14 /* Control register. */
#define UART01x_FR 0x18 /* Flag register (Read only). */
#define UART010_IIR 0x1C /* Interrupt identification register (Read). */
#define UART010_ICR 0x1C /* Interrupt clear register (Write). */
#define ST_UART011_LCRH_RX 0x1C /* Rx line control register. */
#define UART01x_ILPR 0x20 /* IrDA low power counter register. */
#define UART011_IBRD 0x24 /* Integer baud rate divisor register. */
#define UART011_FBRD 0x28 /* Fractional baud rate divisor register. */
#define UART011_LCRH 0x2c /* Line control register. */
#define ST_UART011_LCRH_TX 0x2c /* Tx Line control register. */
#define UART011_CR 0x30 /* Control register. */
#define UART011_IFLS 0x34 /* Interrupt fifo level select. */
#define UART011_IMSC 0x38 /* Interrupt mask. */
#define UART011_RIS 0x3c /* Raw interrupt status. */
#define UART011_MIS 0x40 /* Masked interrupt status. */
#define UART011_ICR 0x44 /* Interrupt clear register. */
#define UART011_DMACR 0x48 /* DMA control register. */
#define ST_UART011_XFCR 0x50 /* XON/XOFF control register. */
#define ST_UART011_XON1 0x54 /* XON1 register. */
#define ST_UART011_XON2 0x58 /* XON2 register. */
#define ST_UART011_XOFF1 0x5C /* XON1 register. */
#define ST_UART011_XOFF2 0x60 /* XON2 register. */
#define ST_UART011_ITCR 0x80 /* Integration test control register. */
#define ST_UART011_ITIP 0x84 /* Integration test input register. */
#define ST_UART011_ABCR 0x100 /* Autobaud control register. */
#define ST_UART011_ABIMSC 0x15C /* Autobaud interrupt mask/clear register. */
/*
* ZTE UART register offsets. This UART has a radically different address
* allocation from the ARM and ST variants, so we list all registers here.
* We assume unlisted registers do not exist.
*/
#define ZX_UART011_DR 0x04
#define ZX_UART011_FR 0x14
#define ZX_UART011_IBRD 0x24
#define ZX_UART011_FBRD 0x28
#define ZX_UART011_LCRH 0x30
#define ZX_UART011_CR 0x34
#define ZX_UART011_IFLS 0x38
#define ZX_UART011_IMSC 0x40
#define ZX_UART011_RIS 0x44
#define ZX_UART011_MIS 0x48
#define ZX_UART011_ICR 0x4c
#define ZX_UART011_DMACR 0x50
#define UART011_DR_OE BIT(11)
#define UART011_DR_BE BIT(10)
#define UART011_DR_PE BIT(9)
#define UART011_DR_FE BIT(8)
#define UART01x_RSR_OE BIT(3)
#define UART01x_RSR_BE BIT(2)
#define UART01x_RSR_PE BIT(1)
#define UART01x_RSR_FE BIT(0)
#define UART011_FR_RI BIT(8)
#define UART011_FR_TXFE BIT(7)
#define UART011_FR_RXFF BIT(6)
#define UART01x_FR_TXFF (1 << 5) /* used in ASM */
#define UART01x_FR_RXFE BIT(4)
#define UART01x_FR_BUSY (1 << 3) /* used in ASM */
#define UART01x_FR_DCD BIT(2)
#define UART01x_FR_DSR BIT(1)
#define UART01x_FR_CTS BIT(0)
#define UART01x_FR_TMSK (UART01x_FR_TXFF + UART01x_FR_BUSY)
/*
* Some bits of Flag Register on ZTE device have different position from
* standard ones.
*/
#define ZX_UART01x_FR_BUSY BIT(8)
#define ZX_UART01x_FR_DSR BIT(3)
#define ZX_UART01x_FR_CTS BIT(1)
#define ZX_UART011_FR_RI BIT(0)
#define UART011_CR_CTSEN BIT(15) /* CTS hardware flow control */
#define UART011_CR_RTSEN BIT(14) /* RTS hardware flow control */
#define UART011_CR_OUT2 BIT(13) /* OUT2 */
#define UART011_CR_OUT1 BIT(12) /* OUT1 */
#define UART011_CR_RTS BIT(11) /* RTS */
#define UART011_CR_DTR BIT(10) /* DTR */
#define UART011_CR_RXE BIT(9) /* receive enable */
#define UART011_CR_TXE BIT(8) /* transmit enable */
#define UART011_CR_LBE BIT(7) /* loopback enable */
#define UART010_CR_RTIE BIT(6)
#define UART010_CR_TIE BIT(5)
#define UART010_CR_RIE BIT(4)
#define UART010_CR_MSIE BIT(3)
#define ST_UART011_CR_OVSFACT BIT(3) /* Oversampling factor */
#define UART01x_CR_IIRLP BIT(2) /* SIR low power mode */
#define UART01x_CR_SIREN BIT(1) /* SIR enable */
#define UART01x_CR_UARTEN BIT(0) /* UART enable */
#define UART011_LCRH_SPS BIT(7)
#define UART01x_LCRH_WLEN_8 0x60
#define UART01x_LCRH_WLEN_7 0x40
#define UART01x_LCRH_WLEN_6 0x20
#define UART01x_LCRH_WLEN_5 0x00
#define UART01x_LCRH_FEN BIT(4)
#define UART01x_LCRH_STP2 BIT(3)
#define UART01x_LCRH_EPS BIT(2)
#define UART01x_LCRH_PEN BIT(1)
#define UART01x_LCRH_BRK BIT(0)
#define ST_UART011_DMAWM_RX GENMASK(5, 3)
#define ST_UART011_DMAWM_RX_1 FIELD_PREP_CONST(ST_UART011_DMAWM_RX, 0)
#define ST_UART011_DMAWM_RX_2 FIELD_PREP_CONST(ST_UART011_DMAWM_RX, 1)
#define ST_UART011_DMAWM_RX_4 FIELD_PREP_CONST(ST_UART011_DMAWM_RX, 2)
#define ST_UART011_DMAWM_RX_8 FIELD_PREP_CONST(ST_UART011_DMAWM_RX, 3)
#define ST_UART011_DMAWM_RX_16 FIELD_PREP_CONST(ST_UART011_DMAWM_RX, 4)
#define ST_UART011_DMAWM_RX_32 FIELD_PREP_CONST(ST_UART011_DMAWM_RX, 5)
#define ST_UART011_DMAWM_RX_48 FIELD_PREP_CONST(ST_UART011_DMAWM_RX, 6)
#define ST_UART011_DMAWM_TX GENMASK(2, 0)
#define ST_UART011_DMAWM_TX_1 FIELD_PREP_CONST(ST_UART011_DMAWM_TX, 0)
#define ST_UART011_DMAWM_TX_2 FIELD_PREP_CONST(ST_UART011_DMAWM_TX, 1)
#define ST_UART011_DMAWM_TX_4 FIELD_PREP_CONST(ST_UART011_DMAWM_TX, 2)
#define ST_UART011_DMAWM_TX_8 FIELD_PREP_CONST(ST_UART011_DMAWM_TX, 3)
#define ST_UART011_DMAWM_TX_16 FIELD_PREP_CONST(ST_UART011_DMAWM_TX, 4)
#define ST_UART011_DMAWM_TX_32 FIELD_PREP_CONST(ST_UART011_DMAWM_TX, 5)
#define ST_UART011_DMAWM_TX_48 FIELD_PREP_CONST(ST_UART011_DMAWM_TX, 6)
#define UART010_IIR_RTIS BIT(3)
#define UART010_IIR_TIS BIT(2)
#define UART010_IIR_RIS BIT(1)
#define UART010_IIR_MIS BIT(0)
#define UART011_IFLS_RXIFLSEL GENMASK(5, 3)
#define UART011_IFLS_RX1_8 FIELD_PREP_CONST(UART011_IFLS_RXIFLSEL, 0)
#define UART011_IFLS_RX2_8 FIELD_PREP_CONST(UART011_IFLS_RXIFLSEL, 1)
#define UART011_IFLS_RX4_8 FIELD_PREP_CONST(UART011_IFLS_RXIFLSEL, 2)
#define UART011_IFLS_RX6_8 FIELD_PREP_CONST(UART011_IFLS_RXIFLSEL, 3)
#define UART011_IFLS_RX7_8 FIELD_PREP_CONST(UART011_IFLS_RXIFLSEL, 4)
#define UART011_IFLS_TXIFLSEL GENMASK(2, 0)
#define UART011_IFLS_TX1_8 FIELD_PREP_CONST(UART011_IFLS_TXIFLSEL, 0)
#define UART011_IFLS_TX2_8 FIELD_PREP_CONST(UART011_IFLS_TXIFLSEL, 1)
#define UART011_IFLS_TX4_8 FIELD_PREP_CONST(UART011_IFLS_TXIFLSEL, 2)
#define UART011_IFLS_TX6_8 FIELD_PREP_CONST(UART011_IFLS_TXIFLSEL, 3)
#define UART011_IFLS_TX7_8 FIELD_PREP_CONST(UART011_IFLS_TXIFLSEL, 4)
/* special values for ST vendor with deeper fifo */
#define UART011_IFLS_RX_HALF FIELD_PREP_CONST(UART011_IFLS_RXIFLSEL, 5)
#define UART011_IFLS_TX_HALF FIELD_PREP_CONST(UART011_IFLS_TXIFLSEL, 5)
#define UART011_OEIM BIT(10) /* overrun error interrupt mask */
#define UART011_BEIM BIT(9) /* break error interrupt mask */
#define UART011_PEIM BIT(8) /* parity error interrupt mask */
#define UART011_FEIM BIT(7) /* framing error interrupt mask */
#define UART011_RTIM BIT(6) /* receive timeout interrupt mask */
#define UART011_TXIM BIT(5) /* transmit interrupt mask */
#define UART011_RXIM BIT(4) /* receive interrupt mask */
#define UART011_DSRMIM BIT(3) /* DSR interrupt mask */
#define UART011_DCDMIM BIT(2) /* DCD interrupt mask */
#define UART011_CTSMIM BIT(1) /* CTS interrupt mask */
#define UART011_RIMIM BIT(0) /* RI interrupt mask */
#define UART011_OEIS BIT(10) /* overrun error interrupt status */
#define UART011_BEIS BIT(9) /* break error interrupt status */
#define UART011_PEIS BIT(8) /* parity error interrupt status */
#define UART011_FEIS BIT(7) /* framing error interrupt status */
#define UART011_RTIS BIT(6) /* receive timeout interrupt status */
#define UART011_TXIS BIT(5) /* transmit interrupt status */
#define UART011_RXIS BIT(4) /* receive interrupt status */
#define UART011_DSRMIS BIT(3) /* DSR interrupt status */
#define UART011_DCDMIS BIT(2) /* DCD interrupt status */
#define UART011_CTSMIS BIT(1) /* CTS interrupt status */
#define UART011_RIMIS BIT(0) /* RI interrupt status */
#define UART011_OEIC BIT(10) /* overrun error interrupt clear */
#define UART011_BEIC BIT(9) /* break error interrupt clear */
#define UART011_PEIC BIT(8) /* parity error interrupt clear */
#define UART011_FEIC BIT(7) /* framing error interrupt clear */
#define UART011_RTIC BIT(6) /* receive timeout interrupt clear */
#define UART011_TXIC BIT(5) /* transmit interrupt clear */
#define UART011_RXIC BIT(4) /* receive interrupt clear */
#define UART011_DSRMIC BIT(3) /* DSR interrupt clear */
#define UART011_DCDMIC BIT(2) /* DCD interrupt clear */
#define UART011_CTSMIC BIT(1) /* CTS interrupt clear */
#define UART011_RIMIC BIT(0) /* RI interrupt clear */
#define UART011_DMAONERR BIT(2) /* disable dma on error */
#define UART011_TXDMAE BIT(1) /* enable transmit dma */
#define UART011_RXDMAE BIT(0) /* enable receive dma */
#define UART01x_RSR_ANY (UART01x_RSR_OE | UART01x_RSR_BE | UART01x_RSR_PE | UART01x_RSR_FE)
#define UART01x_FR_MODEM_ANY (UART01x_FR_DCD | UART01x_FR_DSR | UART01x_FR_CTS)
#ifndef __ASSEMBLY__
struct amba_device; /* in uncompress this is included but amba/bus.h is not */
struct amba_pl010_data {
void (*set_mctrl)(struct amba_device *dev, void __iomem *base, unsigned int mctrl);
};
struct dma_chan;
struct amba_pl011_data {
bool (*dma_filter)(struct dma_chan *chan, void *filter_param);
void *dma_rx_param;
void *dma_tx_param;
bool dma_rx_poll_enable;
unsigned int dma_rx_poll_rate;
unsigned int dma_rx_poll_timeout;
void (*init)(void);
void (*exit)(void);
};
#endif
#endif
|
