1284 files changed, 46838 insertions, 14471 deletions

diff --git a/.gitignore b/.gitignore
index cecb3b040cc1..b93fb7eff942 100644
--- a/.gitignore
+++ b/.gitignore
@@ -27,6 +27,7 @@
 *.gz
 *.lzma
 *.patch
+*.gcno
 
 #
 # Top-level generic files
diff --git a/Documentation/DocBook/mac80211.tmpl b/Documentation/DocBook/mac80211.tmpl
index e36986663570..f3f37f141dbd 100644
--- a/Documentation/DocBook/mac80211.tmpl
+++ b/Documentation/DocBook/mac80211.tmpl
@@ -184,8 +184,6 @@ usage should require reading the full document.
 !Finclude/net/mac80211.h ieee80211_ctstoself_get
 !Finclude/net/mac80211.h ieee80211_ctstoself_duration
 !Finclude/net/mac80211.h ieee80211_generic_frame_duration
-!Finclude/net/mac80211.h ieee80211_get_hdrlen_from_skb
-!Finclude/net/mac80211.h ieee80211_hdrlen
 !Finclude/net/mac80211.h ieee80211_wake_queue
 !Finclude/net/mac80211.h ieee80211_stop_queue
 !Finclude/net/mac80211.h ieee80211_wake_queues
diff --git a/Documentation/block/data-integrity.txt b/Documentation/block/data-integrity.txt
index e8ca040ba2cf..2d735b0ae383 100644
--- a/Documentation/block/data-integrity.txt
+++ b/Documentation/block/data-integrity.txt
@@ -50,7 +50,7 @@ encouraged them to allow separation of the data and integrity metadata
 scatter-gather lists.
 
 The controller will interleave the buffers on write and split them on
-read.  This means that the Linux can DMA the data buffers to and from
+read.  This means that Linux can DMA the data buffers to and from
 host memory without changes to the page cache.
 
 Also, the 16-bit CRC checksum mandated by both the SCSI and SATA specs
@@ -66,7 +66,7 @@ software RAID5).
 
 The IP checksum is weaker than the CRC in terms of detecting bit
 errors.  However, the strength is really in the separation of the data
-buffers and the integrity metadata.  These two distinct buffers much
+buffers and the integrity metadata.  These two distinct buffers must
 match up for an I/O to complete.
 
 The separation of the data and integrity metadata buffers as well as
diff --git a/Documentation/cgroups/cpusets.txt b/Documentation/cgroups/cpusets.txt
index f9ca389dddf4..1d7e9784439a 100644
--- a/Documentation/cgroups/cpusets.txt
+++ b/Documentation/cgroups/cpusets.txt
@@ -777,6 +777,18 @@ in cpuset directories:
 # /bin/echo 1-4 > cpus		-> set cpus list to cpus 1,2,3,4
 # /bin/echo 1,2,3,4 > cpus	-> set cpus list to cpus 1,2,3,4
 
+To add a CPU to a cpuset, write the new list of CPUs including the
+CPU to be added. To add 6 to the above cpuset:
+
+# /bin/echo 1-4,6 > cpus	-> set cpus list to cpus 1,2,3,4,6
+
+Similarly to remove a CPU from a cpuset, write the new list of CPUs
+without the CPU to be removed.
+
+To remove all the CPUs:
+
+# /bin/echo "" > cpus		-> clear cpus list
+
 2.3 Setting flags
 -----------------
 
diff --git a/Documentation/dvb/get_dvb_firmware b/Documentation/dvb/get_dvb_firmware
index a52adfc9a57f..3d1b0ab70c8e 100644
--- a/Documentation/dvb/get_dvb_firmware
+++ b/Documentation/dvb/get_dvb_firmware
@@ -25,7 +25,7 @@ use IO::Handle;
 		"tda10046lifeview", "av7110", "dec2000t", "dec2540t",
 		"dec3000s", "vp7041", "dibusb", "nxt2002", "nxt2004",
 		"or51211", "or51132_qam", "or51132_vsb", "bluebird",
-		"opera1", "cx231xx", "cx18", "cx23885", "pvrusb2" );
+		"opera1", "cx231xx", "cx18", "cx23885", "pvrusb2", "mpc718" );
 
 # Check args
 syntax() if (scalar(@ARGV) != 1);
@@ -381,6 +381,57 @@ sub cx18 {
     $allfiles;
 }
 
+sub mpc718 {
+    my $archive = 'Yuan MPC718 TV Tuner Card 2.13.10.1016.zip';
+    my $url = "ftp://ftp.work.acer-euro.com/desktop/aspire_idea510/vista/Drivers/$archive";
+    my $fwfile = "dvb-cx18-mpc718-mt352.fw";
+    my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 1);
+
+    checkstandard();
+    wgetfile($archive, $url);
+    unzip($archive, $tmpdir);
+
+    my $sourcefile = "$tmpdir/Yuan MPC718 TV Tuner Card 2.13.10.1016/mpc718_32bit/yuanrap.sys";
+    my $found = 0;
+
+    open IN, '<', $sourcefile or die "Couldn't open $sourcefile to extract $fwfile data\n";
+    binmode IN;
+    open OUT, '>', $fwfile;
+    binmode OUT;
+    {
+	# Block scope because we change the line terminator variable $/
+	my $prevlen = 0;
+	my $currlen;
+
+	# Buried in the data segment are 3 runs of almost identical
+	# register-value pairs that end in 0x5d 0x01 which is a "TUNER GO"
+	# command for the MT352.
+	# Pull out the middle run (because it's easy) of register-value
+	# pairs to make the "firmware" file.
+
+	local $/ = "\x5d\x01"; # MT352 "TUNER GO"
+
+	while (<IN>) {
+	    $currlen = length($_);
+	    if ($prevlen == $currlen && $currlen <= 64) {
+		chop; chop; # Get rid of "TUNER GO"
+		s/^\0\0//;  # get rid of leading 00 00 if it's there
+		printf OUT "$_";
+		$found = 1;
+		last;
+	    }
+	    $prevlen = $currlen;
+	}
+    }
+    close OUT;
+    close IN;
+    if (!$found) {
+	unlink $fwfile;
+	die "Couldn't find valid register-value sequence in $sourcefile for $fwfile\n";
+    }
+    $fwfile;
+}
+
 sub cx23885 {
     my $url = "http://linuxtv.org/downloads/firmware/";
 
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index f8cd450be9aa..09e031c55887 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -458,3 +458,13 @@ Why:	Remove the old legacy 32bit machine check code. This has been
 	but the old version has been kept around for easier testing. Note this
 	doesn't impact the old P5 and WinChip machine check handlers.
 Who:	Andi Kleen <andi@firstfloor.org>
+
+----------------------------
+
+What:	lock_policy_rwsem_* and unlock_policy_rwsem_* will not be
+	exported interface anymore.
+When:	2.6.33
+Why:	cpu_policy_rwsem has a new cleaner definition making it local to
+	cpufreq core and contained inside cpufreq.c. Other dependent
+	drivers should not use it in order to safely avoid lockdep issues.
+Who:	Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
diff --git a/Documentation/gcov.txt b/Documentation/gcov.txt
index e716aadb3a33..40ec63352760 100644
--- a/Documentation/gcov.txt
+++ b/Documentation/gcov.txt
@@ -188,13 +188,18 @@ Solution: Exclude affected source files from profiling by specifying
           GCOV_PROFILE := n or GCOV_PROFILE_basename.o := n in the
           corresponding Makefile.
 
+Problem:  Files copied from sysfs appear empty or incomplete.
+Cause:    Due to the way seq_file works, some tools such as cp or tar
+          may not correctly copy files from sysfs.
+Solution: Use 'cat' to read .gcda files and 'cp -d' to copy links.
+          Alternatively use the mechanism shown in Appendix B.
+
 
 Appendix A: gather_on_build.sh
 ==============================
 
 Sample script to gather coverage meta files on the build machine
 (see 6a):
-
 #!/bin/bash
 
 KSRC=$1
@@ -226,7 +231,7 @@ Appendix B: gather_on_test.sh
 Sample script to gather coverage data files on the test machine
 (see 6b):
 
-#!/bin/bash
+#!/bin/bash -e
 
 DEST=$1
 GCDA=/sys/kernel/debug/gcov
@@ -236,11 +241,13 @@ if [ -z "$DEST" ] ; then
   exit 1
 fi
 
-find $GCDA -name '*.gcno' -o -name '*.gcda' | tar cfz $DEST -T -
+TEMPDIR=$(mktemp -d)
+echo Collecting data..
+find $GCDA -type d -exec mkdir -p $TEMPDIR/\{\} \;
+find $GCDA -name '*.gcda' -exec sh -c 'cat < $0 > '$TEMPDIR'/$0' {} \;
+find $GCDA -name '*.gcno' -exec sh -c 'cp -d $0 '$TEMPDIR'/$0' {} \;
+tar czf $DEST -C $TEMPDIR sys
+rm -rf $TEMPDIR
 
-if [ $? -eq 0 ] ; then
-  echo "$DEST successfully created, copy to build system and unpack with:"
-  echo "  tar xfz $DEST"
-else
-  echo "Could not create file $DEST"
-fi
+echo "$DEST successfully created, copy to build system and unpack with:"
+echo "  tar xfz $DEST"
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index d08759aa0903..dd1a6d4bb747 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -1720,8 +1720,8 @@ and is between 256 and 4096 characters. It is defined in the file
 	oprofile.cpu_type=	Force an oprofile cpu type
 			This might be useful if you have an older oprofile
 			userland or if you want common events.
-			Format: { archperfmon }
-			archperfmon: [X86] Force use of architectural
+			Format: { arch_perfmon }
+			arch_perfmon: [X86] Force use of architectural
 				perfmon on Intel CPUs instead of the
 				CPU specific event set.
 
@@ -1915,6 +1915,12 @@ and is between 256 and 4096 characters. It is defined in the file
 			Format: { 0 | 1 }
 			See arch/parisc/kernel/pdc_chassis.c
 
+	percpu_alloc=	[X86] Select which percpu first chunk allocator to use.
+			Allowed values are one of "lpage", "embed" and "4k".
+			See comments in arch/x86/kernel/setup_percpu.c for
+			details on each allocator.  This parameter is primarily
+			for debugging and performance comparison.
+
 	pf.		[PARIDE]
 			See Documentation/blockdev/paride.txt.
 
@@ -2467,7 +2473,8 @@ and is between 256 and 4096 characters. It is defined in the file
 
 	tp720=		[HW,PS2]
 
-	trace_buf_size=nn[KMG] [ftrace] will set tracing buffer size.
+	trace_buf_size=nn[KMG]
+			[FTRACE] will set tracing buffer size.
 
 	trix=		[HW,OSS] MediaTrix AudioTrix Pro
 			Format:
diff --git a/Documentation/kmemleak.txt b/Documentation/kmemleak.txt
index 0112da3b9ab8..89068030b01b 100644
--- a/Documentation/kmemleak.txt
+++ b/Documentation/kmemleak.txt
@@ -16,13 +16,17 @@ Usage
 -----
 
 CONFIG_DEBUG_KMEMLEAK in "Kernel hacking" has to be enabled. A kernel
-thread scans the memory every 10 minutes (by default) and prints any new
-unreferenced objects found. To trigger an intermediate scan and display
-all the possible memory leaks:
+thread scans the memory every 10 minutes (by default) and prints the
+number of new unreferenced objects found. To display the details of all
+the possible memory leaks:
 
   # mount -t debugfs nodev /sys/kernel/debug/
   # cat /sys/kernel/debug/kmemleak
 
+To trigger an intermediate memory scan:
+
+  # echo scan > /sys/kernel/debug/kmemleak
+
 Note that the orphan objects are listed in the order they were allocated
 and one object at the beginning of the list may cause other subsequent
 objects to be reported as orphan.
@@ -31,16 +35,21 @@ Memory scanning parameters can be modified at run-time by writing to the
 /sys/kernel/debug/kmemleak file. The following parameters are supported:
 
   off		- disable kmemleak (irreversible)
-  stack=on	- enable the task stacks scanning
+  stack=on	- enable the task stacks scanning (default)
   stack=off	- disable the tasks stacks scanning
-  scan=on	- start the automatic memory scanning thread
+  scan=on	- start the automatic memory scanning thread (default)
   scan=off	- stop the automatic memory scanning thread
-  scan=<secs>	- set the automatic memory scanning period in seconds (0
-		  to disable it)
+  scan=<secs>	- set the automatic memory scanning period in seconds
+		  (default 600, 0 to stop the automatic scanning)
+  scan		- trigger a memory scan
 
 Kmemleak can also be disabled at boot-time by passing "kmemleak=off" on
 the kernel command line.
 
+Memory may be allocated or freed before kmemleak is initialised and
+these actions are stored in an early log buffer. The size of this buffer
+is configured via the CONFIG_DEBUG_KMEMLEAK_EARLY_LOG_SIZE option.
+
 Basic Algorithm
 ---------------
 
diff --git a/Documentation/leds-lp3944.txt b/Documentation/leds-lp3944.txt
new file mode 100644
index 000000000000..c6eda18b15ef
--- /dev/null
+++ b/Documentation/leds-lp3944.txt
@@ -0,0 +1,50 @@
+Kernel driver lp3944
+====================
+
+  * National Semiconductor LP3944 Fun-light Chip
+    Prefix: 'lp3944'
+    Addresses scanned: None (see the Notes section below)
+    Datasheet: Publicly available at the National Semiconductor website
+               http://www.national.com/pf/LP/LP3944.html
+
+Authors:
+        Antonio Ospite <ospite@studenti.unina.it>
+
+
+Description
+-----------
+The LP3944 is a helper chip that can drive up to 8 leds, with two programmable
+DIM modes; it could even be used as a gpio expander but this driver assumes it
+is used as a led controller.
+
+The DIM modes are used to set _blink_ patterns for leds, the pattern is
+specified supplying two parameters:
+  - period: from 0s to 1.6s
+  - duty cycle: percentage of the period the led is on, from 0 to 100
+
+Setting a led in DIM0 or DIM1 mode makes it blink according to the pattern.
+See the datasheet for details.
+
+LP3944 can be found on Motorola A910 smartphone, where it drives the rgb
+leds, the camera flash light and the lcds power.
+
+
+Notes
+-----
+The chip is used mainly in embedded contexts, so this driver expects it is
+registered using the i2c_board_info mechanism.
+
+To register the chip at address 0x60 on adapter 0, set the platform data
+according to include/linux/leds-lp3944.h, set the i2c board info:
+
+	static struct i2c_board_info __initdata a910_i2c_board_info[] = {
+		{
+			I2C_BOARD_INFO("lp3944", 0x60),
+			.platform_data = &a910_lp3944_leds,
+		},
+	};
+
+and register it in the platform init function
+
+	i2c_register_board_info(0, a910_i2c_board_info,
+			ARRAY_SIZE(a910_i2c_board_info));
diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt
index 8d999d862d0e..79f533f38c61 100644
--- a/Documentation/powerpc/booting-without-of.txt
+++ b/Documentation/powerpc/booting-without-of.txt
@@ -1238,1122 +1238,7 @@ descriptions for the SOC devices for which new nodes have been
 defined; this list will expand as more and more SOC-containing
 platforms are moved over to use the flattened-device-tree model.
 
-   a) PHY nodes
-
-   Required properties:
-
-    - device_type : Should be "ethernet-phy"
-    - interrupts : <a b> where a is the interrupt number and b is a
-      field that represents an encoding of the sense and level
-      information for the interrupt.  This should be encoded based on
-      the information in section 2) depending on the type of interrupt
-      controller you have.
-    - interrupt-parent : the phandle for the interrupt controller that
-      services interrupts for this device.
-    - reg : The ID number for the phy, usually a small integer
-    - linux,phandle :  phandle for this node; likely referenced by an
-      ethernet controller node.
-
-
-   Example:
-
-	ethernet-phy@0 {
-		linux,phandle = <2452000>
-		interrupt-parent = <40000>;
-		interrupts = <35 1>;
-		reg = <0>;
-		device_type = "ethernet-phy";
-	};
-
-
-   b) Interrupt controllers
-
-   Some SOC devices contain interrupt controllers that are different
-   from the standard Open PIC specification.  The SOC device nodes for
-   these types of controllers should be specified just like a standard
-   OpenPIC controller.  Sense and level information should be encoded
-   as specified in section 2) of this chapter for each device that
-   specifies an interrupt.
-
-   Example :
-
-	pic@40000 {
-		linux,phandle = <40000>;
-		interrupt-controller;
-		#address-cells = <0>;
-		reg = <40000 40000>;
-		compatible = "chrp,open-pic";
-		device_type = "open-pic";
-	};
-
-    c) 4xx/Axon EMAC ethernet nodes
-
-    The EMAC ethernet controller in IBM and AMCC 4xx chips, and also
-    the Axon bridge.  To operate this needs to interact with a ths
-    special McMAL DMA controller, and sometimes an RGMII or ZMII
-    interface.  In addition to the nodes and properties described
-    below, the node for the OPB bus on which the EMAC sits must have a
-    correct clock-frequency property.
-
-      i) The EMAC node itself
-
-    Required properties:
-    - device_type       : "network"
-
-    - compatible        : compatible list, contains 2 entries, first is
-			  "ibm,emac-CHIP" where CHIP is the host ASIC (440gx,
-			  405gp, Axon) and second is either "ibm,emac" or
-			  "ibm,emac4".  For Axon, thus, we have: "ibm,emac-axon",
-			  "ibm,emac4"
-    - interrupts        : <interrupt mapping for EMAC IRQ and WOL IRQ>
-    - interrupt-parent  : optional, if needed for interrupt mapping
-    - reg               : <registers mapping>
-    - local-mac-address : 6 bytes, MAC address
-    - mal-device        : phandle of the associated McMAL node
-    - mal-tx-channel    : 1 cell, index of the tx channel on McMAL associated
-			  with this EMAC
-    - mal-rx-channel    : 1 cell, index of the rx channel on McMAL associated
-			  with this EMAC
-    - cell-index        : 1 cell, hardware index of the EMAC cell on a given
-			  ASIC (typically 0x0 and 0x1 for EMAC0 and EMAC1 on
-			  each Axon chip)
-    - max-frame-size    : 1 cell, maximum frame size supported in bytes
-    - rx-fifo-size      : 1 cell, Rx fifo size in bytes for 10 and 100 Mb/sec
-			  operations.
-			  For Axon, 2048
-    - tx-fifo-size      : 1 cell, Tx fifo size in bytes for 10 and 100 Mb/sec
-			  operations.
-			  For Axon, 2048.
-    - fifo-entry-size   : 1 cell, size of a fifo entry (used to calculate
-			  thresholds).
-			  For Axon, 0x00000010
-    - mal-burst-size    : 1 cell, MAL burst size (used to calculate thresholds)
-			  in bytes.
-			  For Axon, 0x00000100 (I think ...)
-    - phy-mode          : string, mode of operations of the PHY interface.
-			  Supported values are: "mii", "rmii", "smii", "rgmii",
-			  "tbi", "gmii", rtbi", "sgmii".
-			  For Axon on CAB, it is "rgmii"
-    - mdio-device       : 1 cell, required iff using shared MDIO registers
-			  (440EP).  phandle of the EMAC to use to drive the
-			  MDIO lines for the PHY used by this EMAC.
-    - zmii-device       : 1 cell, required iff connected to a ZMII.  phandle of
-			  the ZMII device node
-    - zmii-channel      : 1 cell, required iff connected to a ZMII.  Which ZMII
-			  channel or 0xffffffff if ZMII is only used for MDIO.
-    - rgmii-device      : 1 cell, required iff connected to an RGMII. phandle
-			  of the RGMII device node.
-			  For Axon: phandle of plb5/plb4/opb/rgmii
-    - rgmii-channel     : 1 cell, required iff connected to an RGMII.  Which
-			  RGMII channel is used by this EMAC.
-			  Fox Axon: present, whatever value is appropriate for each
-			  EMAC, that is the content of the current (bogus) "phy-port"
-			  property.
-
-    Optional properties:
-    - phy-address       : 1 cell, optional, MDIO address of the PHY. If absent,
-			  a search is performed.
-    - phy-map           : 1 cell, optional, bitmap of addresses to probe the PHY
-			  for, used if phy-address is absent. bit 0x00000001 is
-			  MDIO address 0.
-			  For Axon it can be absent, though my current driver
-			  doesn't handle phy-address yet so for now, keep
-			  0x00ffffff in it.
-    - rx-fifo-size-gige : 1 cell, Rx fifo size in bytes for 1000 Mb/sec
-			  operations (if absent the value is the same as
-			  rx-fifo-size).  For Axon, either absent or 2048.
-    - tx-fifo-size-gige : 1 cell, Tx fifo size in bytes for 1000 Mb/sec
-			  operations (if absent the value is the same as
-			  tx-fifo-size). For Axon, either absent or 2048.
-    - tah-device        : 1 cell, optional. If connected to a TAH engine for
-			  offload, phandle of the TAH device node.
-    - tah-channel       : 1 cell, optional. If appropriate, channel used on the
-			  TAH engine.
-
-    Example:
-
-	EMAC0: ethernet@40000800 {
-		device_type = "network";
-		compatible = "ibm,emac-440gp", "ibm,emac";
-		interrupt-parent = <&UIC1>;
-		interrupts = <1c 4 1d 4>;
-		reg = <40000800 70>;
-		local-mac-address = [00 04 AC E3 1B 1E];
-		mal-device = <&MAL0>;
-		mal-tx-channel = <0 1>;
-		mal-rx-channel = <0>;
-		cell-index = <0>;
-		max-frame-size = <5dc>;
-		rx-fifo-size = <1000>;
-		tx-fifo-size = <800>;
-		phy-mode = "rmii";
-		phy-map = <00000001>;
-		zmii-device = <&ZMII0>;
-		zmii-channel = <0>;
-	};
-
-      ii) McMAL node
-
-    Required properties:
-    - device_type        : "dma-controller"
-    - compatible         : compatible list, containing 2 entries, first is
-			   "ibm,mcmal-CHIP" where CHIP is the host ASIC (like
-			   emac) and the second is either "ibm,mcmal" or
-			   "ibm,mcmal2".
-			   For Axon, "ibm,mcmal-axon","ibm,mcmal2"
-    - interrupts         : <interrupt mapping for the MAL interrupts sources:
-                           5 sources: tx_eob, rx_eob, serr, txde, rxde>.
-                           For Axon: This is _different_ from the current
-			   firmware.  We use the "delayed" interrupts for txeob
-			   and rxeob. Thus we end up with mapping those 5 MPIC
-			   interrupts, all level positive sensitive: 10, 11, 32,
-			   33, 34 (in decimal)
-    - dcr-reg            : < DCR registers range >
-    - dcr-parent         : if needed for dcr-reg
-    - num-tx-chans       : 1 cell, number of Tx channels
-    - num-rx-chans       : 1 cell, number of Rx channels
-
-      iii) ZMII node
-
-    Required properties:
-    - compatible         : compatible list, containing 2 entries, first is
-			   "ibm,zmii-CHIP" where CHIP is the host ASIC (like
-			   EMAC) and the second is "ibm,zmii".
-			   For Axon, there is no ZMII node.
-    - reg                : <registers mapping>
-
-      iv) RGMII node
-
-    Required properties:
-    - compatible         : compatible list, containing 2 entries, first is
-			   "ibm,rgmii-CHIP" where CHIP is the host ASIC (like
-			   EMAC) and the second is "ibm,rgmii".
-                           For Axon, "ibm,rgmii-axon","ibm,rgmii"
-    - reg                : <registers mapping>
-    - revision           : as provided by the RGMII new version register if
-			   available.
-			   For Axon: 0x0000012a
-
-   d) Xilinx IP cores
-
-   The Xilinx EDK toolchain ships with a set of IP cores (devices) for use
-   in Xilinx Spartan and Virtex FPGAs.  The devices cover the whole range
-   of standard device types (network, serial, etc.) and miscellaneous
-   devices (gpio, LCD, spi, etc).  Also, since these devices are
-   implemented within the fpga fabric every instance of the device can be
-   synthesised with different options that change the behaviour.
-
-   Each IP-core has a set of parameters which the FPGA designer can use to
-   control how the core is synthesized.  Historically, the EDK tool would
-   extract the device parameters relevant to device drivers and copy them
-   into an 'xparameters.h' in the form of #define symbols.  This tells the
-   device drivers how the IP cores are configured, but it requres the kernel
-   to be recompiled every time the FPGA bitstream is resynthesized.
-
-   The new approach is to export the parameters into the device tree and
-   generate a new device tree each time the FPGA bitstream changes.  The
-   parameters which used to be exported as #defines will now become
-   properties of the device node.  In general, device nodes for IP-cores
-   will take the following form:
-
-	(name): (generic-name)@(base-address) {
-		compatible = "xlnx,(ip-core-name)-(HW_VER)"
-			     [, (list of compatible devices), ...];
-		reg = <(baseaddr) (size)>;
-		interrupt-parent = <&interrupt-controller-phandle>;
-		interrupts = < ... >;
-		xlnx,(parameter1) = "(string-value)";
-		xlnx,(parameter2) = <(int-value)>;
-	};
-
-	(generic-name):   an open firmware-style name that describes the
-			generic class of device.  Preferably, this is one word, such
-			as 'serial' or 'ethernet'.
-	(ip-core-name):	the name of the ip block (given after the BEGIN
-			directive in system.mhs).  Should be in lowercase
-			and all underscores '_' converted to dashes '-'.
-	(name):		is derived from the "PARAMETER INSTANCE" value.
-	(parameter#):	C_* parameters from system.mhs.  The C_ prefix is
-			dropped from the parameter name, the name is converted
-			to lowercase and all underscore '_' characters are
-			converted to dashes '-'.
-	(baseaddr):	the baseaddr parameter value (often named C_BASEADDR).
-	(HW_VER):	from the HW_VER parameter.
-	(size):		the address range size (often C_HIGHADDR - C_BASEADDR + 1).
-
-   Typically, the compatible list will include the exact IP core version
-   followed by an older IP core version which implements the same
-   interface or any other device with the same interface.
-
-   'reg', 'interrupt-parent' and 'interrupts' are all optional properties.
-
-   For example, the following block from system.mhs:
-
-	BEGIN opb_uartlite
-		PARAMETER INSTANCE = opb_uartlite_0
-		PARAMETER HW_VER = 1.00.b
-		PARAMETER C_BAUDRATE = 115200
-		PARAMETER C_DATA_BITS = 8
-		PARAMETER C_ODD_PARITY = 0
-		PARAMETER C_USE_PARITY = 0
-		PARAMETER C_CLK_FREQ = 50000000
-		PARAMETER C_BASEADDR = 0xEC100000
-		PARAMETER C_HIGHADDR = 0xEC10FFFF
-		BUS_INTERFACE SOPB = opb_7
-		PORT OPB_Clk = CLK_50MHz
-		PORT Interrupt = opb_uartlite_0_Interrupt
-		PORT RX = opb_uartlite_0_RX
-		PORT TX = opb_uartlite_0_TX
-		PORT OPB_Rst = sys_bus_reset_0
-	END
-
-   becomes the following device tree node:
-
-	opb_uartlite_0: serial@ec100000 {
-		device_type = "serial";
-		compatible = "xlnx,opb-uartlite-1.00.b";
-		reg = <ec100000 10000>;
-		interrupt-parent = <&opb_intc_0>;
-		interrupts = <1 0>; // got this from the opb_intc parameters
-		current-speed = <d#115200>;	// standard serial device prop
-		clock-frequency = <d#50000000>;	// standard serial device prop
-		xlnx,data-bits = <8>;
-		xlnx,odd-parity = <0>;
-		xlnx,use-parity = <0>;
-	};
-
-   Some IP cores actually implement 2 or more logical devices.  In
-   this case, the device should still describe the whole IP core with
-   a single node and add a child node for each logical device.  The
-   ranges property can be used to translate from parent IP-core to the
-   registers of each device.  In addition, the parent node should be
-   compatible with the bus type 'xlnx,compound', and should contain
-   #address-cells and #size-cells, as with any other bus.  (Note: this
-   makes the assumption that both logical devices have the same bus
-   binding.  If this is not true, then separate nodes should be used
-   for each logical device).  The 'cell-index' property can be used to
-   enumerate logical devices within an IP core.  For example, the
-   following is the system.mhs entry for the dual ps2 controller found
-   on the ml403 reference design.
-
-	BEGIN opb_ps2_dual_ref
-		PARAMETER INSTANCE = opb_ps2_dual_ref_0
-		PARAMETER HW_VER = 1.00.a
-		PARAMETER C_BASEADDR = 0xA9000000
-		PARAMETER C_HIGHADDR = 0xA9001FFF
-		BUS_INTERFACE SOPB = opb_v20_0
-		PORT Sys_Intr1 = ps2_1_intr
-		PORT Sys_Intr2 = ps2_2_intr
-		PORT Clkin1 = ps2_clk_rx_1
-		PORT Clkin2 = ps2_clk_rx_2
-		PORT Clkpd1 = ps2_clk_tx_1
-		PORT Clkpd2 = ps2_clk_tx_2
-		PORT Rx1 = ps2_d_rx_1
-		PORT Rx2 = ps2_d_rx_2
-		PORT Txpd1 = ps2_d_tx_1
-		PORT Txpd2 = ps2_d_tx_2
-	END
-
-   It would result in the following device tree nodes:
-
-	opb_ps2_dual_ref_0: opb-ps2-dual-ref@a9000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "xlnx,compound";
-		ranges = <0 a9000000 2000>;
-		// If this device had extra parameters, then they would
-		// go here.
-		ps2@0 {
-			compatible = "xlnx,opb-ps2-dual-ref-1.00.a";
-			reg = <0 40>;
-			interrupt-parent = <&opb_intc_0>;
-			interrupts = <3 0>;
-			cell-index = <0>;
-		};
-		ps2@1000 {
-			compatible = "xlnx,opb-ps2-dual-ref-1.00.a";
-			reg = <1000 40>;
-			interrupt-parent = <&opb_intc_0>;
-			interrupts = <3 0>;
-			cell-index = <0>;
-		};
-	};
-
-   Also, the system.mhs file defines bus attachments from the processor
-   to the devices.  The device tree structure should reflect the bus
-   attachments.  Again an example; this system.mhs fragment:
-
-	BEGIN ppc405_virtex4
-		PARAMETER INSTANCE = ppc405_0
-		PARAMETER HW_VER = 1.01.a
-		BUS_INTERFACE DPLB = plb_v34_0
-		BUS_INTERFACE IPLB = plb_v34_0
-	END
-
-	BEGIN opb_intc
-		PARAMETER INSTANCE = opb_intc_0
-		PARAMETER HW_VER = 1.00.c
-		PARAMETER C_BASEADDR = 0xD1000FC0
-		PARAMETER C_HIGHADDR = 0xD1000FDF
-		BUS_INTERFACE SOPB = opb_v20_0
-	END
-
-	BEGIN opb_uart16550
-		PARAMETER INSTANCE = opb_uart16550_0
-		PARAMETER HW_VER = 1.00.d
-		PARAMETER C_BASEADDR = 0xa0000000
-		PARAMETER C_HIGHADDR = 0xa0001FFF
-		BUS_INTERFACE SOPB = opb_v20_0
-	END
-
-	BEGIN plb_v34
-		PARAMETER INSTANCE = plb_v34_0
-		PARAMETER HW_VER = 1.02.a
-	END
-
-	BEGIN plb_bram_if_cntlr
-		PARAMETER INSTANCE = plb_bram_if_cntlr_0
-		PARAMETER HW_VER = 1.00.b
-		PARAMETER C_BASEADDR = 0xFFFF0000
-		PARAMETER C_HIGHADDR = 0xFFFFFFFF
-		BUS_INTERFACE SPLB = plb_v34_0
-	END
-
-	BEGIN plb2opb_bridge
-		PARAMETER INSTANCE = plb2opb_bridge_0
-		PARAMETER HW_VER = 1.01.a
-		PARAMETER C_RNG0_BASEADDR = 0x20000000
-		PARAMETER C_RNG0_HIGHADDR = 0x3FFFFFFF
-		PARAMETER C_RNG1_BASEADDR = 0x60000000
-		PARAMETER C_RNG1_HIGHADDR = 0x7FFFFFFF
-		PARAMETER C_RNG2_BASEADDR = 0x80000000
-		PARAMETER C_RNG2_HIGHADDR = 0xBFFFFFFF
-		PARAMETER C_RNG3_BASEADDR = 0xC0000000
-		PARAMETER C_RNG3_HIGHADDR = 0xDFFFFFFF
-		BUS_INTERFACE SPLB = plb_v34_0
-		BUS_INTERFACE MOPB = opb_v20_0
-	END
-
-   Gives this device tree (some properties removed for clarity):
-
-	plb@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "xlnx,plb-v34-1.02.a";
-		device_type = "ibm,plb";
-		ranges; // 1:1 translation
-
-		plb_bram_if_cntrl_0: bram@ffff0000 {
-			reg = <ffff0000 10000>;
-		}
-
-		opb@20000000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <20000000 20000000 20000000
-				  60000000 60000000 20000000
-				  80000000 80000000 40000000
-				  c0000000 c0000000 20000000>;
-
-			opb_uart16550_0: serial@a0000000 {
-				reg = <a00000000 2000>;
-			};
-
-			opb_intc_0: interrupt-controller@d1000fc0 {
-				reg = <d1000fc0 20>;
-			};
-		};
-	};
-
-   That covers the general approach to binding xilinx IP cores into the
-   device tree.  The following are bindings for specific devices:
-
-      i) Xilinx ML300 Framebuffer
-
-      Simple framebuffer device from the ML300 reference design (also on the
-      ML403 reference design as well as others).
-
-      Optional properties:
-       - resolution = <xres yres> : pixel resolution of framebuffer.  Some
-                                    implementations use a different resolution.
-                                    Default is <d#640 d#480>
-       - virt-resolution = <xvirt yvirt> : Size of framebuffer in memory.
-                                           Default is <d#1024 d#480>.
-       - rotate-display (empty) : rotate display 180 degrees.
-
-      ii) Xilinx SystemACE
-
-      The Xilinx SystemACE device is used to program FPGAs from an FPGA
-      bitstream stored on a CF card.  It can also be used as a generic CF
-      interface device.
-
-      Optional properties:
-       - 8-bit (empty) : Set this property for SystemACE in 8 bit mode
-
-      iii) Xilinx EMAC and Xilinx TEMAC
-
-      Xilinx Ethernet devices.  In addition to general xilinx properties
-      listed above, nodes for these devices should include a phy-handle
-      property, and may include other common network device properties
-      like local-mac-address.
-
-      iv) Xilinx Uartlite
-
-      Xilinx uartlite devices are simple fixed speed serial ports.
-
-      Required properties:
-       - current-speed : Baud rate of uartlite
-
-      v) Xilinx hwicap
-
-		Xilinx hwicap devices provide access to the configuration logic
-		of the FPGA through the Internal Configuration Access Port
-		(ICAP).  The ICAP enables partial reconfiguration of the FPGA,
-		readback of the configuration information, and some control over
-		'warm boots' of the FPGA fabric.
-
-		Required properties:
-		- xlnx,family : The family of the FPGA, necessary since the
-                      capabilities of the underlying ICAP hardware
-                      differ between different families.  May be
-                      'virtex2p', 'virtex4', or 'virtex5'.
-
-      vi) Xilinx Uart 16550
-
-      Xilinx UART 16550 devices are very similar to the NS16550 but with
-      different register spacing and an offset from the base address.
-
-      Required properties:
-       - clock-frequency : Frequency of the clock input
-       - reg-offset : A value of 3 is required
-       - reg-shift : A value of 2 is required
-
-    e) USB EHCI controllers
-
-    Required properties:
-      - compatible : should be "usb-ehci".
-      - reg : should contain at least address and length of the standard EHCI
-        register set for the device. Optional platform-dependent registers
-        (debug-port or other) can be also specified here, but only after
-        definition of standard EHCI registers.
-      - interrupts : one EHCI interrupt should be described here.
-    If device registers are implemented in big endian mode, the device
-    node should have "big-endian-regs" property.
-    If controller implementation operates with big endian descriptors,
-    "big-endian-desc" property should be specified.
-    If both big endian registers and descriptors are used by the controller
-    implementation, "big-endian" property can be specified instead of having
-    both "big-endian-regs" and "big-endian-desc".
-
-     Example (Sequoia 440EPx):
-	    ehci@e0000300 {
-		   compatible = "ibm,usb-ehci-440epx", "usb-ehci";
-		   interrupt-parent = <&UIC0>;
-		   interrupts = <1a 4>;
-		   reg = <0 e0000300 90 0 e0000390 70>;
-		   big-endian;
-	   };
-
-   f) MDIO on GPIOs
-
-   Currently defined compatibles:
-   - virtual,gpio-mdio
-
-   MDC and MDIO lines connected to GPIO controllers are listed in the
-   gpios property as described in section VIII.1 in the following order:
-
-   MDC, MDIO.
-
-   Example:
-
-	mdio {
-		compatible = "virtual,mdio-gpio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		gpios = <&qe_pio_a 11
-			 &qe_pio_c 6>;
-	};
-
-    g) SPI (Serial Peripheral Interface) busses
-
-    SPI busses can be described with a node for the SPI master device
-    and a set of child nodes for each SPI slave on the bus.  For this
-    discussion, it is assumed that the system's SPI controller is in
-    SPI master mode.  This binding does not describe SPI controllers
-    in slave mode.
-
-    The SPI master node requires the following properties:
-    - #address-cells  - number of cells required to define a chip select
-			address on the SPI bus.
-    - #size-cells     - should be zero.
-    - compatible      - name of SPI bus controller following generic names
-			recommended practice.
-    No other properties are required in the SPI bus node.  It is assumed
-    that a driver for an SPI bus device will understand that it is an SPI bus.
-    However, the binding does not attempt to define the specific method for
-    assigning chip select numbers.  Since SPI chip select configuration is
-    flexible and non-standardized, it is left out of this binding with the
-    assumption that board specific platform code will be used to manage
-    chip selects.  Individual drivers can define additional properties to
-    support describing the chip select layout.
-
-    SPI slave nodes must be children of the SPI master node and can
-    contain the following properties.
-    - reg             - (required) chip select address of device.
-    - compatible      - (required) name of SPI device following generic names
-			recommended practice
-    - spi-max-frequency - (required) Maximum SPI clocking speed of device in Hz
-    - spi-cpol        - (optional) Empty property indicating device requires
-			inverse clock polarity (CPOL) mode
-    - spi-cpha        - (optional) Empty property indicating device requires
-			shifted clock phase (CPHA) mode
-    - spi-cs-high     - (optional) Empty property indicating device requires
-			chip select active high
-
-    SPI example for an MPC5200 SPI bus:
-		spi@f00 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
-			reg = <0xf00 0x20>;
-			interrupts = <2 13 0 2 14 0>;
-			interrupt-parent = <&mpc5200_pic>;
-
-			ethernet-switch@0 {
-				compatible = "micrel,ks8995m";
-				spi-max-frequency = <1000000>;
-				reg = <0>;
-			};
-
-			codec@1 {
-				compatible = "ti,tlv320aic26";
-				spi-max-frequency = <100000>;
-				reg = <1>;
-			};
-		};
-
-VII - Marvell Discovery mv64[345]6x System Controller chips
-===========================================================
-
-The Marvell mv64[345]60 series of system controller chips contain
-many of the peripherals needed to implement a complete computer
-system.  In this section, we define device tree nodes to describe
-the system controller chip itself and each of the peripherals
-which it contains.  Compatible string values for each node are
-prefixed with the string "marvell,", for Marvell Technology Group Ltd.
-
-1) The /system-controller node
-
-  This node is used to represent the system-controller and must be
-  present when the system uses a system controller chip. The top-level
-  system-controller node contains information that is global to all
-  devices within the system controller chip. The node name begins
-  with "system-controller" followed by the unit address, which is
-  the base address of the memory-mapped register set for the system
-  controller chip.
-
-  Required properties:
-
-    - ranges : Describes the translation of system controller addresses
-      for memory mapped registers.
-    - clock-frequency: Contains the main clock frequency for the system
-      controller chip.
-    - reg : This property defines the address and size of the
-      memory-mapped registers contained within the system controller
-      chip.  The address specified in the "reg" property should match
-      the unit address of the system-controller node.
-    - #address-cells : Address representation for system controller
-      devices.  This field represents the number of cells needed to
-      represent the address of the memory-mapped registers of devices
-      within the system controller chip.
-    - #size-cells : Size representation for for the memory-mapped
-      registers within the system controller chip.
-    - #interrupt-cells : Defines the width of cells used to represent
-      interrupts.
-
-  Optional properties:
-
-    - model : The specific model of the system controller chip.  Such
-      as, "mv64360", "mv64460", or "mv64560".
-    - compatible : A string identifying the compatibility identifiers
-      of the system controller chip.
-
-  The system-controller node contains child nodes for each system
-  controller device that the platform uses.  Nodes should not be created
-  for devices which exist on the system controller chip but are not used
-
-  Example Marvell Discovery mv64360 system-controller node:
-
-    system-controller@f1000000 { /* Marvell Discovery mv64360 */
-	    #address-cells = <1>;
-	    #size-cells = <1>;
-	    model = "mv64360";                      /* Default */
-	    compatible = "marvell,mv64360";
-	    clock-frequency = <133333333>;
-	    reg = <0xf1000000 0x10000>;
-	    virtual-reg = <0xf1000000>;
-	    ranges = <0x88000000 0x88000000 0x1000000 /* PCI 0 I/O Space */
-		    0x80000000 0x80000000 0x8000000 /* PCI 0 MEM Space */
-		    0xa0000000 0xa0000000 0x4000000 /* User FLASH */
-		    0x00000000 0xf1000000 0x0010000 /* Bridge's regs */
-		    0xf2000000 0xf2000000 0x0040000>;/* Integrated SRAM */
-
-	    [ child node definitions... ]
-    }
-
-2) Child nodes of /system-controller
-
-   a) Marvell Discovery MDIO bus
-
-   The MDIO is a bus to which the PHY devices are connected.  For each
-   device that exists on this bus, a child node should be created.  See
-   the definition of the PHY node below for an example of how to define
-   a PHY.
-
-   Required properties:
-     - #address-cells : Should be <1>
-     - #size-cells : Should be <0>
-     - device_type : Should be "mdio"
-     - compatible : Should be "marvell,mv64360-mdio"
-
-   Example:
-
-     mdio {
-	     #address-cells = <1>;
-	     #size-cells = <0>;
-	     device_type = "mdio";
-	     compatible = "marvell,mv64360-mdio";
-
-	     ethernet-phy@0 {
-		     ......
-	     };
-     };
-
-
-   b) Marvell Discovery ethernet controller
-
-   The Discover ethernet controller is described with two levels
-   of nodes.  The first level describes an ethernet silicon block
-   and the second level describes up to 3 ethernet nodes within
-   that block.  The reason for the multiple levels is that the
-   registers for the node are interleaved within a single set
-   of registers.  The "ethernet-block" level describes the
-   shared register set, and the "ethernet" nodes describe ethernet
-   port-specific properties.
-
-   Ethernet block node
-
-   Required properties:
-     - #address-cells : <1>
-     - #size-cells : <0>
-     - compatible : "marvell,mv64360-eth-block"
-     - reg : Offset and length of the register set for this block
-
-   Example Discovery Ethernet block node:
-     ethernet-block@2000 {
-	     #address-cells = <1>;
-	     #size-cells = <0>;
-	     compatible = "marvell,mv64360-eth-block";
-	     reg = <0x2000 0x2000>;
-	     ethernet@0 {
-		     .......
-	     };
-     };
-
-   Ethernet port node
-
-   Required properties:
-     - device_type : Should be "network".
-     - compatible : Should be "marvell,mv64360-eth".
-     - reg : Should be <0>, <1>, or <2>, according to which registers
-       within the silicon block the device uses.
-     - interrupts : <a> where a is the interrupt number for the port.
-     - interrupt-parent : the phandle for the interrupt controller
-       that services interrupts for this device.
-     - phy : the phandle for the PHY connected to this ethernet
-       controller.
-     - local-mac-address : 6 bytes, MAC address
-
-   Example Discovery Ethernet port node:
-     ethernet@0 {
-	     device_type = "network";
-	     compatible = "marvell,mv64360-eth";
-	     reg = <0>;
-	     interrupts = <32>;
-	     interrupt-parent = <&PIC>;
-	     phy = <&PHY0>;
-	     local-mac-address = [ 00 00 00 00 00 00 ];
-     };
-
-
-
-   c) Marvell Discovery PHY nodes
-
-   Required properties:
-     - device_type : Should be "ethernet-phy"
-     - interrupts : <a> where a is the interrupt number for this phy.
-     - interrupt-parent : the phandle for the interrupt controller that
-       services interrupts for this device.
-     - reg : The ID number for the phy, usually a small integer
-
-   Example Discovery PHY node:
-     ethernet-phy@1 {
-	     device_type = "ethernet-phy";
-	     compatible = "broadcom,bcm5421";
-	     interrupts = <76>;      /* GPP 12 */
-	     interrupt-parent = <&PIC>;
-	     reg = <1>;
-     };
-
-
-   d) Marvell Discovery SDMA nodes
-
-   Represent DMA hardware associated with the MPSC (multiprotocol
-   serial controllers).
-
-   Required properties:
-     - compatible : "marvell,mv64360-sdma"
-     - reg : Offset and length of the register set for this device
-     - interrupts : <a> where a is the interrupt number for the DMA
-       device.
-     - interrupt-parent : the phandle for the interrupt controller
-       that services interrupts for this device.
-
-   Example Discovery SDMA node:
-     sdma@4000 {
-	     compatible = "marvell,mv64360-sdma";
-	     reg = <0x4000 0xc18>;
-	     virtual-reg = <0xf1004000>;
-	     interrupts = <36>;
-	     interrupt-parent = <&PIC>;
-     };
-
-
-   e) Marvell Discovery BRG nodes
-
-   Represent baud rate generator hardware associated with the MPSC
-   (multiprotocol serial controllers).
-
-   Required properties:
-     - compatible : "marvell,mv64360-brg"
-     - reg : Offset and length of the register set for this device
-     - clock-src : A value from 0 to 15 which selects the clock
-       source for the baud rate generator.  This value corresponds
-       to the CLKS value in the BRGx configuration register.  See
-       the mv64x60 User's Manual.
-     - clock-frequence : The frequency (in Hz) of the baud rate
-       generator's input clock.
-     - current-speed : The current speed setting (presumably by
-       firmware) of the baud rate generator.
-
-   Example Discovery BRG node:
-     brg@b200 {
-	     compatible = "marvell,mv64360-brg";
-	     reg = <0xb200 0x8>;
-	     clock-src = <8>;
-	     clock-frequency = <133333333>;
-	     current-speed = <9600>;
-     };
-
-
-   f) Marvell Discovery CUNIT nodes
-
-   Represent the Serial Communications Unit device hardware.
-
-   Required properties:
-     - reg : Offset and length of the register set for this device
-
-   Example Discovery CUNIT node:
-     cunit@f200 {
-	     reg = <0xf200 0x200>;
-     };
-
-
-   g) Marvell Discovery MPSCROUTING nodes
-
-   Represent the Discovery's MPSC routing hardware
-
-   Required properties:
-     - reg : Offset and length of the register set for this device
-
-   Example Discovery CUNIT node:
-     mpscrouting@b500 {
-	     reg = <0xb400 0xc>;
-     };
-
-
-   h) Marvell Discovery MPSCINTR nodes
-
-   Represent the Discovery's MPSC DMA interrupt hardware registers
-   (SDMA cause and mask registers).
-
-   Required properties:
-     - reg : Offset and length of the register set for this device
-
-   Example Discovery MPSCINTR node:
-     mpsintr@b800 {
-	     reg = <0xb800 0x100>;
-     };
-
-
-   i) Marvell Discovery MPSC nodes
-
-   Represent the Discovery's MPSC (Multiprotocol Serial Controller)
-   serial port.
-
-   Required properties:
-     - device_type : "serial"
-     - compatible : "marvell,mv64360-mpsc"
-     - reg : Offset and length of the register set for this device
-     - sdma : the phandle for the SDMA node used by this port
-     - brg : the phandle for the BRG node used by this port
-     - cunit : the phandle for the CUNIT node used by this port
-     - mpscrouting : the phandle for the MPSCROUTING node used by this port
-     - mpscintr : the phandle for the MPSCINTR node used by this port
-     - cell-index : the hardware index of this cell in the MPSC core
-     - max_idle : value needed for MPSC CHR3 (Maximum Frame Length)
-       register
-     - interrupts : <a> where a is the interrupt number for the MPSC.
-     - interrupt-parent : the phandle for the interrupt controller
-       that services interrupts for this device.
-
-   Example Discovery MPSCINTR node:
-     mpsc@8000 {
-	     device_type = "serial";
-	     compatible = "marvell,mv64360-mpsc";
-	     reg = <0x8000 0x38>;
-	     virtual-reg = <0xf1008000>;
-	     sdma = <&SDMA0>;
-	     brg = <&BRG0>;
-	     cunit = <&CUNIT>;
-	     mpscrouting = <&MPSCROUTING>;
-	     mpscintr = <&MPSCINTR>;
-	     cell-index = <0>;
-	     max_idle = <40>;
-	     interrupts = <40>;
-	     interrupt-parent = <&PIC>;
-     };
-
-
-   j) Marvell Discovery Watch Dog Timer nodes
-
-   Represent the Discovery's watchdog timer hardware
-
-   Required properties:
-     - compatible : "marvell,mv64360-wdt"
-     - reg : Offset and length of the register set for this device
-
-   Example Discovery Watch Dog Timer node:
-     wdt@b410 {
-	     compatible = "marvell,mv64360-wdt";
-	     reg = <0xb410 0x8>;
-     };
-
-
-   k) Marvell Discovery I2C nodes
-
-   Represent the Discovery's I2C hardware
-
-   Required properties:
-     - device_type : "i2c"
-     - compatible : "marvell,mv64360-i2c"
-     - reg : Offset and length of the register set for this device
-     - interrupts : <a> where a is the interrupt number for the I2C.
-     - interrupt-parent : the phandle for the interrupt controller
-       that services interrupts for this device.
-
-   Example Discovery I2C node:
-	     compatible = "marvell,mv64360-i2c";
-	     reg = <0xc000 0x20>;
-	     virtual-reg = <0xf100c000>;
-	     interrupts = <37>;
-	     interrupt-parent = <&PIC>;
-     };
-
-
-   l) Marvell Discovery PIC (Programmable Interrupt Controller) nodes
-
-   Represent the Discovery's PIC hardware
-
-   Required properties:
-     - #interrupt-cells : <1>
-     - #address-cells : <0>
-     - compatible : "marvell,mv64360-pic"
-     - reg : Offset and length of the register set for this device
-     - interrupt-controller
-
-   Example Discovery PIC node:
-     pic {
-	     #interrupt-cells = <1>;
-	     #address-cells = <0>;
-	     compatible = "marvell,mv64360-pic";
-	     reg = <0x0 0x88>;
-	     interrupt-controller;
-     };
-
-
-   m) Marvell Discovery MPP (Multipurpose Pins) multiplexing nodes
-
-   Represent the Discovery's MPP hardware
-
-   Required properties:
-     - compatible : "marvell,mv64360-mpp"
-     - reg : Offset and length of the register set for this device
-
-   Example Discovery MPP node:
-     mpp@f000 {
-	     compatible = "marvell,mv64360-mpp";
-	     reg = <0xf000 0x10>;
-     };
-
-
-   n) Marvell Discovery GPP (General Purpose Pins) nodes
-
-   Represent the Discovery's GPP hardware
-
-   Required properties:
-     - compatible : "marvell,mv64360-gpp"
-     - reg : Offset and length of the register set for this device
-
-   Example Discovery GPP node:
-     gpp@f000 {
-	     compatible = "marvell,mv64360-gpp";
-	     reg = <0xf100 0x20>;
-     };
-
-
-   o) Marvell Discovery PCI host bridge node
-
-   Represents the Discovery's PCI host bridge device.  The properties
-   for this node conform to Rev 2.1 of the PCI Bus Binding to IEEE
-   1275-1994.  A typical value for the compatible property is
-   "marvell,mv64360-pci".
-
-   Example Discovery PCI host bridge node
-     pci@80000000 {
-	     #address-cells = <3>;
-	     #size-cells = <2>;
-	     #interrupt-cells = <1>;
-	     device_type = "pci";
-	     compatible = "marvell,mv64360-pci";
-	     reg = <0xcf8 0x8>;
-	     ranges = <0x01000000 0x0        0x0
-			     0x88000000 0x0 0x01000000
-		       0x02000000 0x0 0x80000000
-			     0x80000000 0x0 0x08000000>;
-	     bus-range = <0 255>;
-	     clock-frequency = <66000000>;
-	     interrupt-parent = <&PIC>;
-	     interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-	     interrupt-map = <
-		     /* IDSEL 0x0a */
-		     0x5000 0 0 1 &PIC 80
-		     0x5000 0 0 2 &PIC 81
-		     0x5000 0 0 3 &PIC 91
-		     0x5000 0 0 4 &PIC 93
-
-		     /* IDSEL 0x0b */
-		     0x5800 0 0 1 &PIC 91
-		     0x5800 0 0 2 &PIC 93
-		     0x5800 0 0 3 &PIC 80
-		     0x5800 0 0 4 &PIC 81
-
-		     /* IDSEL 0x0c */
-		     0x6000 0 0 1 &PIC 91
-		     0x6000 0 0 2 &PIC 93
-		     0x6000 0 0 3 &PIC 80
-		     0x6000 0 0 4 &PIC 81
-
-		     /* IDSEL 0x0d */
-		     0x6800 0 0 1 &PIC 93
-		     0x6800 0 0 2 &PIC 80
-		     0x6800 0 0 3 &PIC 81
-		     0x6800 0 0 4 &PIC 91
-	     >;
-     };
-
-
-   p) Marvell Discovery CPU Error nodes
-
-   Represent the Discovery's CPU error handler device.
-
-   Required properties:
-     - compatible : "marvell,mv64360-cpu-error"
-     - reg : Offset and length of the register set for this device
-     - interrupts : the interrupt number for this device
-     - interrupt-parent : the phandle for the interrupt controller
-       that services interrupts for this device.
-
-   Example Discovery CPU Error node:
-     cpu-error@0070 {
-	     compatible = "marvell,mv64360-cpu-error";
-	     reg = <0x70 0x10 0x128 0x28>;
-	     interrupts = <3>;
-	     interrupt-parent = <&PIC>;
-     };
-
-
-   q) Marvell Discovery SRAM Controller nodes
-
-   Represent the Discovery's SRAM controller device.
-
-   Required properties:
-     - compatible : "marvell,mv64360-sram-ctrl"
-     - reg : Offset and length of the register set for this device
-     - interrupts : the interrupt number for this device
-     - interrupt-parent : the phandle for the interrupt controller
-       that services interrupts for this device.
-
-   Example Discovery SRAM Controller node:
-     sram-ctrl@0380 {
-	     compatible = "marvell,mv64360-sram-ctrl";
-	     reg = <0x380 0x80>;
-	     interrupts = <13>;
-	     interrupt-parent = <&PIC>;
-     };
-
-
-   r) Marvell Discovery PCI Error Handler nodes
-
-   Represent the Discovery's PCI error handler device.
-
-   Required properties:
-     - compatible : "marvell,mv64360-pci-error"
-     - reg : Offset and length of the register set for this device
-     - interrupts : the interrupt number for this device
-     - interrupt-parent : the phandle for the interrupt controller
-       that services interrupts for this device.
-
-   Example Discovery PCI Error Handler node:
-     pci-error@1d40 {
-	     compatible = "marvell,mv64360-pci-error";
-	     reg = <0x1d40 0x40 0xc28 0x4>;
-	     interrupts = <12>;
-	     interrupt-parent = <&PIC>;
-     };
-
-
-   s) Marvell Discovery Memory Controller nodes
-
-   Represent the Discovery's memory controller device.
-
-   Required properties:
-     - compatible : "marvell,mv64360-mem-ctrl"
-     - reg : Offset and length of the register set for this device
-     - interrupts : the interrupt number for this device
-     - interrupt-parent : the phandle for the interrupt controller
-       that services interrupts for this device.
-
-   Example Discovery Memory Controller node:
-     mem-ctrl@1400 {
-	     compatible = "marvell,mv64360-mem-ctrl";
-	     reg = <0x1400 0x60>;
-	     interrupts = <17>;
-	     interrupt-parent = <&PIC>;
-     };
-
-
-VIII - Specifying interrupt information for devices
+VII - Specifying interrupt information for devices
 ===================================================
 
 The device tree represents the busses and devices of a hardware
@@ -2439,56 +1324,7 @@ encodings listed below:
 	2 =  high to low edge sensitive type enabled
 	3 =  low to high edge sensitive type enabled
 
-IX - Specifying GPIO information for devices
-============================================
-
-1) gpios property
------------------
-
-Nodes that makes use of GPIOs should define them using `gpios' property,
-format of which is: <&gpio-controller1-phandle gpio1-specifier
-		     &gpio-controller2-phandle gpio2-specifier
-		     0 /* holes are permitted, means no GPIO 3 */
-		     &gpio-controller4-phandle gpio4-specifier
-		     ...>;
-
-Note that gpio-specifier length is controller dependent.
-
-gpio-specifier may encode: bank, pin position inside the bank,
-whether pin is open-drain and whether pin is logically inverted.
-
-Example of the node using GPIOs:
-
-	node {
-		gpios = <&qe_pio_e 18 0>;
-	};
-
-In this example gpio-specifier is "18 0" and encodes GPIO pin number,
-and empty GPIO flags as accepted by the "qe_pio_e" gpio-controller.
-
-2) gpio-controller nodes
-------------------------
-
-Every GPIO controller node must have #gpio-cells property defined,
-this information will be used to translate gpio-specifiers.
-
-Example of two SOC GPIO banks defined as gpio-controller nodes:
-
-	qe_pio_a: gpio-controller@1400 {
-		#gpio-cells = <2>;
-		compatible = "fsl,qe-pario-bank-a", "fsl,qe-pario-bank";
-		reg = <0x1400 0x18>;
-		gpio-controller;
-	};
-
-	qe_pio_e: gpio-controller@1460 {
-		#gpio-cells = <2>;
-		compatible = "fsl,qe-pario-bank-e", "fsl,qe-pario-bank";
-		reg = <0x1460 0x18>;
-		gpio-controller;
-	};
-
-X - Specifying Device Power Management Information (sleep property)
+VIII - Specifying Device Power Management Information (sleep property)
 ===================================================================
 
 Devices on SOCs often have mechanisms for placing devices into low-power
diff --git a/Documentation/powerpc/dts-bindings/4xx/emac.txt b/Documentation/powerpc/dts-bindings/4xx/emac.txt
new file mode 100644
index 000000000000..2161334a7ca5
--- /dev/null
+++ b/Documentation/powerpc/dts-bindings/4xx/emac.txt
@@ -0,0 +1,148 @@
+    4xx/Axon EMAC ethernet nodes
+
+    The EMAC ethernet controller in IBM and AMCC 4xx chips, and also
+    the Axon bridge.  To operate this needs to interact with a ths
+    special McMAL DMA controller, and sometimes an RGMII or ZMII
+    interface.  In addition to the nodes and properties described
+    below, the node for the OPB bus on which the EMAC sits must have a
+    correct clock-frequency property.
+
+      i) The EMAC node itself
+
+    Required properties:
+    - device_type       : "network"
+
+    - compatible        : compatible list, contains 2 entries, first is
+			  "ibm,emac-CHIP" where CHIP is the host ASIC (440gx,
+			  405gp, Axon) and second is either "ibm,emac" or
+			  "ibm,emac4".  For Axon, thus, we have: "ibm,emac-axon",
+			  "ibm,emac4"
+    - interrupts        : <interrupt mapping for EMAC IRQ and WOL IRQ>
+    - interrupt-parent  : optional, if needed for interrupt mapping
+    - reg               : <registers mapping>
+    - local-mac-address : 6 bytes, MAC address
+    - mal-device        : phandle of the associated McMAL node
+    - mal-tx-channel    : 1 cell, index of the tx channel on McMAL associated
+			  with this EMAC
+    - mal-rx-channel    : 1 cell, index of the rx channel on McMAL associated
+			  with this EMAC
+    - cell-index        : 1 cell, hardware index of the EMAC cell on a given
+			  ASIC (typically 0x0 and 0x1 for EMAC0 and EMAC1 on
+			  each Axon chip)
+    - max-frame-size    : 1 cell, maximum frame size supported in bytes
+    - rx-fifo-size      : 1 cell, Rx fifo size in bytes for 10 and 100 Mb/sec
+			  operations.
+			  For Axon, 2048
+    - tx-fifo-size      : 1 cell, Tx fifo size in bytes for 10 and 100 Mb/sec
+			  operations.
+			  For Axon, 2048.
+    - fifo-entry-size   : 1 cell, size of a fifo entry (used to calculate
+			  thresholds).
+			  For Axon, 0x00000010
+    - mal-burst-size    : 1 cell, MAL burst size (used to calculate thresholds)
+			  in bytes.
+			  For Axon, 0x00000100 (I think ...)
+    - phy-mode          : string, mode of operations of the PHY interface.
+			  Supported values are: "mii", "rmii", "smii", "rgmii",
+			  "tbi", "gmii", rtbi", "sgmii".
+			  For Axon on CAB, it is "rgmii"
+    - mdio-device       : 1 cell, required iff using shared MDIO registers
+			  (440EP).  phandle of the EMAC to use to drive the
+			  MDIO lines for the PHY used by this EMAC.
+    - zmii-device       : 1 cell, required iff connected to a ZMII.  phandle of
+			  the ZMII device node
+    - zmii-channel      : 1 cell, required iff connected to a ZMII.  Which ZMII
+			  channel or 0xffffffff if ZMII is only used for MDIO.
+    - rgmii-device      : 1 cell, required iff connected to an RGMII. phandle
+			  of the RGMII device node.
+			  For Axon: phandle of plb5/plb4/opb/rgmii
+    - rgmii-channel     : 1 cell, required iff connected to an RGMII.  Which
+			  RGMII channel is used by this EMAC.
+			  Fox Axon: present, whatever value is appropriate for each
+			  EMAC, that is the content of the current (bogus) "phy-port"
+			  property.
+
+    Optional properties:
+    - phy-address       : 1 cell, optional, MDIO address of the PHY. If absent,
+			  a search is performed.
+    - phy-map           : 1 cell, optional, bitmap of addresses to probe the PHY
+			  for, used if phy-address is absent. bit 0x00000001 is
+			  MDIO address 0.
+			  For Axon it can be absent, though my current driver
+			  doesn't handle phy-address yet so for now, keep
+			  0x00ffffff in it.
+    - rx-fifo-size-gige : 1 cell, Rx fifo size in bytes for 1000 Mb/sec
+			  operations (if absent the value is the same as
+			  rx-fifo-size).  For Axon, either absent or 2048.
+    - tx-fifo-size-gige : 1 cell, Tx fifo size in bytes for 1000 Mb/sec
+			  operations (if absent the value is the same as
+			  tx-fifo-size). For Axon, either absent or 2048.
+    - tah-device        : 1 cell, optional. If connected to a TAH engine for
+			  offload, phandle of the TAH device node.
+    - tah-channel       : 1 cell, optional. If appropriate, channel used on the
+			  TAH engine.
+
+    Example:
+
+	EMAC0: ethernet@40000800 {
+		device_type = "network";
+		compatible = "ibm,emac-440gp", "ibm,emac";
+		interrupt-parent = <&UIC1>;
+		interrupts = <1c 4 1d 4>;
+		reg = <40000800 70>;
+		local-mac-address = [00 04 AC E3 1B 1E];
+		mal-device = <&MAL0>;
+		mal-tx-channel = <0 1>;
+		mal-rx-channel = <0>;
+		cell-index = <0>;
+		max-frame-size = <5dc>;
+		rx-fifo-size = <1000>;
+		tx-fifo-size = <800>;
+		phy-mode = "rmii";
+		phy-map = <00000001>;
+		zmii-device = <&ZMII0>;
+		zmii-channel = <0>;
+	};
+
+      ii) McMAL node
+
+    Required properties:
+    - device_type        : "dma-controller"
+    - compatible         : compatible list, containing 2 entries, first is
+			   "ibm,mcmal-CHIP" where CHIP is the host ASIC (like
+			   emac) and the second is either "ibm,mcmal" or
+			   "ibm,mcmal2".
+			   For Axon, "ibm,mcmal-axon","ibm,mcmal2"
+    - interrupts         : <interrupt mapping for the MAL interrupts sources:
+                           5 sources: tx_eob, rx_eob, serr, txde, rxde>.
+                           For Axon: This is _different_ from the current
+			   firmware.  We use the "delayed" interrupts for txeob
+			   and rxeob. Thus we end up with mapping those 5 MPIC
+			   interrupts, all level positive sensitive: 10, 11, 32,
+			   33, 34 (in decimal)
+    - dcr-reg            : < DCR registers range >
+    - dcr-parent         : if needed for dcr-reg
+    - num-tx-chans       : 1 cell, number of Tx channels
+    - num-rx-chans       : 1 cell, number of Rx channels
+
+      iii) ZMII node
+
+    Required properties:
+    - compatible         : compatible list, containing 2 entries, first is
+			   "ibm,zmii-CHIP" where CHIP is the host ASIC (like
+			   EMAC) and the second is "ibm,zmii".
+			   For Axon, there is no ZMII node.
+    - reg                : <registers mapping>
+
+      iv) RGMII node
+
+    Required properties:
+    - compatible         : compatible list, containing 2 entries, first is
+			   "ibm,rgmii-CHIP" where CHIP is the host ASIC (like
+			   EMAC) and the second is "ibm,rgmii".
+                           For Axon, "ibm,rgmii-axon","ibm,rgmii"
+    - reg                : <registers mapping>
+    - revision           : as provided by the RGMII new version register if
+			   available.
+			   For Axon: 0x0000012a
+
diff --git a/Documentation/powerpc/dts-bindings/gpio/gpio.txt b/Documentation/powerpc/dts-bindings/gpio/gpio.txt
new file mode 100644
index 000000000000..edaa84d288a1
--- /dev/null
+++ b/Documentation/powerpc/dts-bindings/gpio/gpio.txt
@@ -0,0 +1,50 @@
+Specifying GPIO information for devices
+============================================
+
+1) gpios property
+-----------------
+
+Nodes that makes use of GPIOs should define them using `gpios' property,
+format of which is: <&gpio-controller1-phandle gpio1-specifier
+		     &gpio-controller2-phandle gpio2-specifier
+		     0 /* holes are permitted, means no GPIO 3 */
+		     &gpio-controller4-phandle gpio4-specifier
+		     ...>;
+
+Note that gpio-specifier length is controller dependent.
+
+gpio-specifier may encode: bank, pin position inside the bank,
+whether pin is open-drain and whether pin is logically inverted.
+
+Example of the node using GPIOs:
+
+	node {
+		gpios = <&qe_pio_e 18 0>;
+	};
+
+In this example gpio-specifier is "18 0" and encodes GPIO pin number,
+and empty GPIO flags as accepted by the "qe_pio_e" gpio-controller.
+
+2) gpio-controller nodes
+------------------------
+
+Every GPIO controller node must have #gpio-cells property defined,
+this information will be used to translate gpio-specifiers.
+
+Example of two SOC GPIO banks defined as gpio-controller nodes:
+
+	qe_pio_a: gpio-controller@1400 {
+		#gpio-cells = <2>;
+		compatible = "fsl,qe-pario-bank-a", "fsl,qe-pario-bank";
+		reg = <0x1400 0x18>;
+		gpio-controller;
+	};
+
+	qe_pio_e: gpio-controller@1460 {
+		#gpio-cells = <2>;
+		compatible = "fsl,qe-pario-bank-e", "fsl,qe-pario-bank";
+		reg = <0x1460 0x18>;
+		gpio-controller;
+	};
+
+
diff --git a/Documentation/powerpc/dts-bindings/gpio/led.txt b/Documentation/powerpc/dts-bindings/gpio/led.txt
index 4fe14deedc0a..064db928c3c1 100644
--- a/Documentation/powerpc/dts-bindings/gpio/led.txt
+++ b/Documentation/powerpc/dts-bindings/gpio/led.txt
@@ -16,10 +16,17 @@ LED sub-node properties:
   string defining the trigger assigned to the LED.  Current triggers are:
     "backlight" - LED will act as a back-light, controlled by the framebuffer
 		  system
-    "default-on" - LED will turn on
+    "default-on" - LED will turn on, but see "default-state" below
     "heartbeat" - LED "double" flashes at a load average based rate
     "ide-disk" - LED indicates disk activity
     "timer" - LED flashes at a fixed, configurable rate
+- default-state:  (optional) The initial state of the LED.  Valid
+  values are "on", "off", and "keep".  If the LED is already on or off
+  and the default-state property is set the to same value, then no
+  glitch should be produced where the LED momentarily turns off (or
+  on).  The "keep" setting will keep the LED at whatever its current
+  state is, without producing a glitch.  The default is off if this
+  property is not present.
 
 Examples:
 
@@ -30,14 +37,22 @@ leds {
 		gpios = <&mcu_pio 0 1>; /* Active low */
 		linux,default-trigger = "ide-disk";
 	};
+
+	fault {
+		gpios = <&mcu_pio 1 0>;
+		/* Keep LED on if BIOS detected hardware fault */
+		default-state = "keep";
+	};
 };
 
 run-control {
 	compatible = "gpio-leds";
 	red {
 		gpios = <&mpc8572 6 0>;
+		default-state = "off";
 	};
 	green {
 		gpios = <&mpc8572 7 0>;
+		default-state = "on";
 	};
 }
diff --git a/Documentation/powerpc/dts-bindings/gpio/mdio.txt b/Documentation/powerpc/dts-bindings/gpio/mdio.txt
new file mode 100644
index 000000000000..bc9549529014
--- /dev/null
+++ b/Documentation/powerpc/dts-bindings/gpio/mdio.txt
@@ -0,0 +1,19 @@
+MDIO on GPIOs
+
+Currently defined compatibles:
+- virtual,gpio-mdio
+
+MDC and MDIO lines connected to GPIO controllers are listed in the
+gpios property as described in section VIII.1 in the following order:
+
+MDC, MDIO.
+
+Example:
+
+mdio {
+	compatible = "virtual,mdio-gpio";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	gpios = <&qe_pio_a 11
+		 &qe_pio_c 6>;
+};
diff --git a/Documentation/powerpc/dts-bindings/marvell.txt b/Documentation/powerpc/dts-bindings/marvell.txt
new file mode 100644
index 000000000000..3708a2fd4747
--- /dev/null
+++ b/Documentation/powerpc/dts-bindings/marvell.txt
@@ -0,0 +1,521 @@
+Marvell Discovery mv64[345]6x System Controller chips
+===========================================================
+
+The Marvell mv64[345]60 series of system controller chips contain
+many of the peripherals needed to implement a complete computer
+system.  In this section, we define device tree nodes to describe
+the system controller chip itself and each of the peripherals
+which it contains.  Compatible string values for each node are
+prefixed with the string "marvell,", for Marvell Technology Group Ltd.
+
+1) The /system-controller node
+
+  This node is used to represent the system-controller and must be
+  present when the system uses a system controller chip. The top-level
+  system-controller node contains information that is global to all
+  devices within the system controller chip. The node name begins
+  with "system-controller" followed by the unit address, which is
+  the base address of the memory-mapped register set for the system
+  controller chip.
+
+  Required properties:
+
+    - ranges : Describes the translation of system controller addresses
+      for memory mapped registers.
+    - clock-frequency: Contains the main clock frequency for the system
+      controller chip.
+    - reg : This property defines the address and size of the
+      memory-mapped registers contained within the system controller
+      chip.  The address specified in the "reg" property should match
+      the unit address of the system-controller node.
+    - #address-cells : Address representation for system controller
+      devices.  This field represents the number of cells needed to
+      represent the address of the memory-mapped registers of devices
+      within the system controller chip.
+    - #size-cells : Size representation for for the memory-mapped
+      registers within the system controller chip.
+    - #interrupt-cells : Defines the width of cells used to represent
+      interrupts.
+
+  Optional properties:
+
+    - model : The specific model of the system controller chip.  Such
+      as, "mv64360", "mv64460", or "mv64560".
+    - compatible : A string identifying the compatibility identifiers
+      of the system controller chip.
+
+  The system-controller node contains child nodes for each system
+  controller device that the platform uses.  Nodes should not be created
+  for devices which exist on the system controller chip but are not used
+
+  Example Marvell Discovery mv64360 system-controller node:
+
+    system-controller@f1000000 { /* Marvell Discovery mv64360 */
+	    #address-cells = <1>;
+	    #size-cells = <1>;
+	    model = "mv64360";                      /* Default */
+	    compatible = "marvell,mv64360";
+	    clock-frequency = <133333333>;
+	    reg = <0xf1000000 0x10000>;
+	    virtual-reg = <0xf1000000>;
+	    ranges = <0x88000000 0x88000000 0x1000000 /* PCI 0 I/O Space */
+		    0x80000000 0x80000000 0x8000000 /* PCI 0 MEM Space */
+		    0xa0000000 0xa0000000 0x4000000 /* User FLASH */
+		    0x00000000 0xf1000000 0x0010000 /* Bridge's regs */
+		    0xf2000000 0xf2000000 0x0040000>;/* Integrated SRAM */
+
+	    [ child node definitions... ]
+    }
+
+2) Child nodes of /system-controller
+
+   a) Marvell Discovery MDIO bus
+
+   The MDIO is a bus to which the PHY devices are connected.  For each
+   device that exists on this bus, a child node should be created.  See
+   the definition of the PHY node below for an example of how to define
+   a PHY.
+
+   Required properties:
+     - #address-cells : Should be <1>
+     - #size-cells : Should be <0>
+     - device_type : Should be "mdio"
+     - compatible : Should be "marvell,mv64360-mdio"
+
+   Example:
+
+     mdio {
+	     #address-cells = <1>;
+	     #size-cells = <0>;
+	     device_type = "mdio";
+	     compatible = "marvell,mv64360-mdio";
+
+	     ethernet-phy@0 {
+		     ......
+	     };
+     };
+
+
+   b) Marvell Discovery ethernet controller
+
+   The Discover ethernet controller is described with two levels
+   of nodes.  The first level describes an ethernet silicon block
+   and the second level describes up to 3 ethernet nodes within
+   that block.  The reason for the multiple levels is that the
+   registers for the node are interleaved within a single set
+   of registers.  The "ethernet-block" level describes the
+   shared register set, and the "ethernet" nodes describe ethernet
+   port-specific properties.
+
+   Ethernet block node
+
+   Required properties:
+     - #address-cells : <1>
+     - #size-cells : <0>
+     - compatible : "marvell,mv64360-eth-block"
+     - reg : Offset and length of the register set for this block
+
+   Example Discovery Ethernet block node:
+     ethernet-block@2000 {
+	     #address-cells = <1>;
+	     #size-cells = <0>;
+	     compatible = "marvell,mv64360-eth-block";
+	     reg = <0x2000 0x2000>;
+	     ethernet@0 {
+		     .......
+	     };
+     };
+
+   Ethernet port node
+
+   Required properties:
+     - device_type : Should be "network".
+     - compatible : Should be "marvell,mv64360-eth".
+     - reg : Should be <0>, <1>, or <2>, according to which registers
+       within the silicon block the device uses.
+     - interrupts : <a> where a is the interrupt number for the port.
+     - interrupt-parent : the phandle for the interrupt controller
+       that services interrupts for this device.
+     - phy : the phandle for the PHY connected to this ethernet
+       controller.
+     - local-mac-address : 6 bytes, MAC address
+
+   Example Discovery Ethernet port node:
+     ethernet@0 {
+	     device_type = "network";
+	     compatible = "marvell,mv64360-eth";
+	     reg = <0>;
+	     interrupts = <32>;
+	     interrupt-parent = <&PIC>;
+	     phy = <&PHY0>;
+	     local-mac-address = [ 00 00 00 00 00 00 ];
+     };
+
+
+
+   c) Marvell Discovery PHY nodes
+
+   Required properties:
+     - device_type : Should be "ethernet-phy"
+     - interrupts : <a> where a is the interrupt number for this phy.
+     - interrupt-parent : the phandle for the interrupt controller that
+       services interrupts for this device.
+     - reg : The ID number for the phy, usually a small integer
+
+   Example Discovery PHY node:
+     ethernet-phy@1 {
+	     device_type = "ethernet-phy";
+	     compatible = "broadcom,bcm5421";
+	     interrupts = <76>;      /* GPP 12 */
+	     interrupt-parent = <&PIC>;
+	     reg = <1>;
+     };
+
+
+   d) Marvell Discovery SDMA nodes
+
+   Represent DMA hardware associated with the MPSC (multiprotocol
+   serial controllers).
+
+   Required properties:
+     - compatible : "marvell,mv64360-sdma"
+     - reg : Offset and length of the register set for this device
+     - interrupts : <a> where a is the interrupt number for the DMA
+       device.
+     - interrupt-parent : the phandle for the interrupt controller
+       that services interrupts for this device.
+
+   Example Discovery SDMA node:
+     sdma@4000 {
+	     compatible = "marvell,mv64360-sdma";
+	     reg = <0x4000 0xc18>;
+	     virtual-reg = <0xf1004000>;
+	     interrupts = <36>;
+	     interrupt-parent = <&PIC>;
+     };
+
+
+   e) Marvell Discovery BRG nodes
+
+   Represent baud rate generator hardware associated with the MPSC
+   (multiprotocol serial controllers).
+
+   Required properties:
+     - compatible : "marvell,mv64360-brg"
+     - reg : Offset and length of the register set for this device
+     - clock-src : A value from 0 to 15 which selects the clock
+       source for the baud rate generator.  This value corresponds
+       to the CLKS value in the BRGx configuration register.  See
+       the mv64x60 User's Manual.
+     - clock-frequence : The frequency (in Hz) of the baud rate
+       generator's input clock.
+     - current-speed : The current speed setting (presumably by
+       firmware) of the baud rate generator.
+
+   Example Discovery BRG node:
+     brg@b200 {
+	     compatible = "marvell,mv64360-brg";
+	     reg = <0xb200 0x8>;
+	     clock-src = <8>;
+	     clock-frequency = <133333333>;
+	     current-speed = <9600>;
+     };
+
+
+   f) Marvell Discovery CUNIT nodes
+
+   Represent the Serial Communications Unit device hardware.
+
+   Required properties:
+     - reg : Offset and length of the register set for this device
+
+   Example Discovery CUNIT node:
+     cunit@f200 {
+	     reg = <0xf200 0x200>;
+     };
+
+
+   g) Marvell Discovery MPSCROUTING nodes
+
+   Represent the Discovery's MPSC routing hardware
+
+   Required properties:
+     - reg : Offset and length of the register set for this device
+
+   Example Discovery CUNIT node:
+     mpscrouting@b500 {
+	     reg = <0xb400 0xc>;
+     };
+
+
+   h) Marvell Discovery MPSCINTR nodes
+
+   Represent the Discovery's MPSC DMA interrupt hardware registers
+   (SDMA cause and mask registers).
+
+   Required properties:
+     - reg : Offset and length of the register set for this device
+
+   Example Discovery MPSCINTR node:
+     mpsintr@b800 {
+	     reg = <0xb800 0x100>;
+     };
+
+
+   i) Marvell Discovery MPSC nodes
+
+   Represent the Discovery's MPSC (Multiprotocol Serial Controller)
+   serial port.
+
+   Required properties:
+     - device_type : "serial"
+     - compatible : "marvell,mv64360-mpsc"
+     - reg : Offset and length of the register set for this device
+     - sdma : the phandle for the SDMA node used by this port
+     - brg : the phandle for the BRG node used by this port
+     - cunit : the phandle for the CUNIT node used by this port
+     - mpscrouting : the phandle for the MPSCROUTING node used by this port
+     - mpscintr : the phandle for the MPSCINTR node used by this port
+     - cell-index : the hardware index of this cell in the MPSC core
+     - max_idle : value needed for MPSC CHR3 (Maximum Frame Length)
+       register
+     - interrupts : <a> where a is the interrupt number for the MPSC.
+     - interrupt-parent : the phandle for the interrupt controller
+       that services interrupts for this device.
+
+   Example Discovery MPSCINTR node:
+     mpsc@8000 {
+	     device_type = "serial";
+	     compatible = "marvell,mv64360-mpsc";
+	     reg = <0x8000 0x38>;
+	     virtual-reg = <0xf1008000>;
+	     sdma = <&SDMA0>;
+	     brg = <&BRG0>;
+	     cunit = <&CUNIT>;
+	     mpscrouting = <&MPSCROUTING>;
+	     mpscintr = <&MPSCINTR>;
+	     cell-index = <0>;
+	     max_idle = <40>;
+	     interrupts = <40>;
+	     interrupt-parent = <&PIC>;
+     };
+
+
+   j) Marvell Discovery Watch Dog Timer nodes
+
+   Represent the Discovery's watchdog timer hardware
+
+   Required properties:
+     - compatible : "marvell,mv64360-wdt"
+     - reg : Offset and length of the register set for this device
+
+   Example Discovery Watch Dog Timer node:
+     wdt@b410 {
+	     compatible = "marvell,mv64360-wdt";
+	     reg = <0xb410 0x8>;
+     };
+
+
+   k) Marvell Discovery I2C nodes
+
+   Represent the Discovery's I2C hardware
+
+   Required properties:
+     - device_type : "i2c"
+     - compatible : "marvell,mv64360-i2c"
+     - reg : Offset and length of the register set for this device
+     - interrupts : <a> where a is the interrupt number for the I2C.
+     - interrupt-parent : the phandle for the interrupt controller
+       that services interrupts for this device.
+
+   Example Discovery I2C node:
+	     compatible = "marvell,mv64360-i2c";
+	     reg = <0xc000 0x20>;
+	     virtual-reg = <0xf100c000>;
+	     interrupts = <37>;
+	     interrupt-parent = <&PIC>;
+     };
+
+
+   l) Marvell Discovery PIC (Programmable Interrupt Controller) nodes
+
+   Represent the Discovery's PIC hardware
+
+   Required properties:
+     - #interrupt-cells : <1>
+     - #address-cells : <0>
+     - compatible : "marvell,mv64360-pic"
+     - reg : Offset and length of the register set for this device
+     - interrupt-controller
+
+   Example Discovery PIC node:
+     pic {
+	     #interrupt-cells = <1>;
+	     #address-cells = <0>;
+	     compatible = "marvell,mv64360-pic";
+	     reg = <0x0 0x88>;
+	     interrupt-controller;
+     };
+
+
+   m) Marvell Discovery MPP (Multipurpose Pins) multiplexing nodes
+
+   Represent the Discovery's MPP hardware
+
+   Required properties:
+     - compatible : "marvell,mv64360-mpp"
+     - reg : Offset and length of the register set for this device
+
+   Example Discovery MPP node:
+     mpp@f000 {
+	     compatible = "marvell,mv64360-mpp";
+	     reg = <0xf000 0x10>;
+     };
+
+
+   n) Marvell Discovery GPP (General Purpose Pins) nodes
+
+   Represent the Discovery's GPP hardware
+
+   Required properties:
+     - compatible : "marvell,mv64360-gpp"
+     - reg : Offset and length of the register set for this device
+
+   Example Discovery GPP node:
+     gpp@f000 {
+	     compatible = "marvell,mv64360-gpp";
+	     reg = <0xf100 0x20>;
+     };
+
+
+   o) Marvell Discovery PCI host bridge node
+
+   Represents the Discovery's PCI host bridge device.  The properties
+   for this node conform to Rev 2.1 of the PCI Bus Binding to IEEE
+   1275-1994.  A typical value for the compatible property is
+   "marvell,mv64360-pci".
+
+   Example Discovery PCI host bridge node
+     pci@80000000 {
+	     #address-cells = <3>;
+	     #size-cells = <2>;
+	     #interrupt-cells = <1>;
+	     device_type = "pci";
+	     compatible = "marvell,mv64360-pci";
+	     reg = <0xcf8 0x8>;
+	     ranges = <0x01000000 0x0        0x0
+			     0x88000000 0x0 0x01000000
+		       0x02000000 0x0 0x80000000
+			     0x80000000 0x0 0x08000000>;
+	     bus-range = <0 255>;
+	     clock-frequency = <66000000>;
+	     interrupt-parent = <&PIC>;
+	     interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+	     interrupt-map = <
+		     /* IDSEL 0x0a */
+		     0x5000 0 0 1 &PIC 80
+		     0x5000 0 0 2 &PIC 81
+		     0x5000 0 0 3 &PIC 91
+		     0x5000 0 0 4 &PIC 93
+
+		     /* IDSEL 0x0b */
+		     0x5800 0 0 1 &PIC 91
+		     0x5800 0 0 2 &PIC 93
+		     0x5800 0 0 3 &PIC 80
+		     0x5800 0 0 4 &PIC 81
+
+		     /* IDSEL 0x0c */
+		     0x6000 0 0 1 &PIC 91
+		     0x6000 0 0 2 &PIC 93
+		     0x6000 0 0 3 &PIC 80
+		     0x6000 0 0 4 &PIC 81
+
+		     /* IDSEL 0x0d */
+		     0x6800 0 0 1 &PIC 93
+		     0x6800 0 0 2 &PIC 80
+		     0x6800 0 0 3 &PIC 81
+		     0x6800 0 0 4 &PIC 91
+	     >;
+     };
+
+
+   p) Marvell Discovery CPU Error nodes
+
+   Represent the Discovery's CPU error handler device.
+
+   Required properties:
+     - compatible : "marvell,mv64360-cpu-error"
+     - reg : Offset and length of the register set for this device
+     - interrupts : the interrupt number for this device
+     - interrupt-parent : the phandle for the interrupt controller
+       that services interrupts for this device.
+
+   Example Discovery CPU Error node:
+     cpu-error@0070 {
+	     compatible = "marvell,mv64360-cpu-error";
+	     reg = <0x70 0x10 0x128 0x28>;
+	     interrupts = <3>;
+	     interrupt-parent = <&PIC>;
+     };
+
+
+   q) Marvell Discovery SRAM Controller nodes
+
+   Represent the Discovery's SRAM controller device.
+
+   Required properties:
+     - compatible : "marvell,mv64360-sram-ctrl"
+     - reg : Offset and length of the register set for this device
+     - interrupts : the interrupt number for this device
+     - interrupt-parent : the phandle for the interrupt controller
+       that services interrupts for this device.
+
+   Example Discovery SRAM Controller node:
+     sram-ctrl@0380 {
+	     compatible = "marvell,mv64360-sram-ctrl";
+	     reg = <0x380 0x80>;
+	     interrupts = <13>;
+	     interrupt-parent = <&PIC>;
+     };
+
+
+   r) Marvell Discovery PCI Error Handler nodes
+
+   Represent the Discovery's PCI error handler device.
+
+   Required properties:
+     - compatible : "marvell,mv64360-pci-error"
+     - reg : Offset and length of the register set for this device
+     - interrupts : the interrupt number for this device
+     - interrupt-parent : the phandle for the interrupt controller
+       that services interrupts for this device.
+
+   Example Discovery PCI Error Handler node:
+     pci-error@1d40 {
+	     compatible = "marvell,mv64360-pci-error";
+	     reg = <0x1d40 0x40 0xc28 0x4>;
+	     interrupts = <12>;
+	     interrupt-parent = <&PIC>;
+     };
+
+
+   s) Marvell Discovery Memory Controller nodes
+
+   Represent the Discovery's memory controller device.
+
+   Required properties:
+     - compatible : "marvell,mv64360-mem-ctrl"
+     - reg : Offset and length of the register set for this device
+     - interrupts : the interrupt number for this device
+     - interrupt-parent : the phandle for the interrupt controller
+       that services interrupts for this device.
+
+   Example Discovery Memory Controller node:
+     mem-ctrl@1400 {
+	     compatible = "marvell,mv64360-mem-ctrl";
+	     reg = <0x1400 0x60>;
+	     interrupts = <17>;
+	     interrupt-parent = <&PIC>;
+     };
+
+
diff --git a/Documentation/powerpc/dts-bindings/phy.txt b/Documentation/powerpc/dts-bindings/phy.txt
new file mode 100644
index 000000000000..bb8c742eb8c5
--- /dev/null
+++ b/Documentation/powerpc/dts-bindings/phy.txt
@@ -0,0 +1,25 @@
+PHY nodes
+
+Required properties:
+
+ - device_type : Should be "ethernet-phy"
+ - interrupts : <a b> where a is the interrupt number and b is a
+   field that represents an encoding of the sense and level
+   information for the interrupt.  This should be encoded based on
+   the information in section 2) depending on the type of interrupt
+   controller you have.
+ - interrupt-parent : the phandle for the interrupt controller that
+   services interrupts for this device.
+ - reg : The ID number for the phy, usually a small integer
+ - linux,phandle :  phandle for this node; likely referenced by an
+   ethernet controller node.
+
+Example:
+
+ethernet-phy@0 {
+	linux,phandle = <2452000>
+	interrupt-parent = <40000>;
+	interrupts = <35 1>;
+	reg = <0>;
+	device_type = "ethernet-phy";
+};
diff --git a/Documentation/powerpc/dts-bindings/spi-bus.txt b/Documentation/powerpc/dts-bindings/spi-bus.txt
new file mode 100644
index 000000000000..e782add2e457
--- /dev/null
+++ b/Documentation/powerpc/dts-bindings/spi-bus.txt
@@ -0,0 +1,57 @@
+SPI (Serial Peripheral Interface) busses
+
+SPI busses can be described with a node for the SPI master device
+and a set of child nodes for each SPI slave on the bus.  For this
+discussion, it is assumed that the system's SPI controller is in
+SPI master mode.  This binding does not describe SPI controllers
+in slave mode.
+
+The SPI master node requires the following properties:
+- #address-cells  - number of cells required to define a chip select
+    		address on the SPI bus.
+- #size-cells     - should be zero.
+- compatible      - name of SPI bus controller following generic names
+    		recommended practice.
+No other properties are required in the SPI bus node.  It is assumed
+that a driver for an SPI bus device will understand that it is an SPI bus.
+However, the binding does not attempt to define the specific method for
+assigning chip select numbers.  Since SPI chip select configuration is
+flexible and non-standardized, it is left out of this binding with the
+assumption that board specific platform code will be used to manage
+chip selects.  Individual drivers can define additional properties to
+support describing the chip select layout.
+
+SPI slave nodes must be children of the SPI master node and can
+contain the following properties.
+- reg             - (required) chip select address of device.
+- compatible      - (required) name of SPI device following generic names
+    		recommended practice
+- spi-max-frequency - (required) Maximum SPI clocking speed of device in Hz
+- spi-cpol        - (optional) Empty property indicating device requires
+    		inverse clock polarity (CPOL) mode
+- spi-cpha        - (optional) Empty property indicating device requires
+    		shifted clock phase (CPHA) mode
+- spi-cs-high     - (optional) Empty property indicating device requires
+    		chip select active high
+
+SPI example for an MPC5200 SPI bus:
+	spi@f00 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
+		reg = <0xf00 0x20>;
+		interrupts = <2 13 0 2 14 0>;
+		interrupt-parent = <&mpc5200_pic>;
+
+		ethernet-switch@0 {
+			compatible = "micrel,ks8995m";
+			spi-max-frequency = <1000000>;
+			reg = <0>;
+		};
+
+		codec@1 {
+			compatible = "ti,tlv320aic26";
+			spi-max-frequency = <100000>;
+			reg = <1>;
+		};
+	};
diff --git a/Documentation/powerpc/dts-bindings/usb-ehci.txt b/Documentation/powerpc/dts-bindings/usb-ehci.txt
new file mode 100644
index 000000000000..fa18612f757b
--- /dev/null
+++ b/Documentation/powerpc/dts-bindings/usb-ehci.txt
@@ -0,0 +1,25 @@
+USB EHCI controllers
+
+Required properties:
+  - compatible : should be "usb-ehci".
+  - reg : should contain at least address and length of the standard EHCI
+    register set for the device. Optional platform-dependent registers
+    (debug-port or other) can be also specified here, but only after
+    definition of standard EHCI registers.
+  - interrupts : one EHCI interrupt should be described here.
+If device registers are implemented in big endian mode, the device
+node should have "big-endian-regs" property.
+If controller implementation operates with big endian descriptors,
+"big-endian-desc" property should be specified.
+If both big endian registers and descriptors are used by the controller
+implementation, "big-endian" property can be specified instead of having
+both "big-endian-regs" and "big-endian-desc".
+
+Example (Sequoia 440EPx):
+    ehci@e0000300 {
+	   compatible = "ibm,usb-ehci-440epx", "usb-ehci";
+	   interrupt-parent = <&UIC0>;
+	   interrupts = <1a 4>;
+	   reg = <0 e0000300 90 0 e0000390 70>;
+	   big-endian;
+   };
diff --git a/Documentation/powerpc/dts-bindings/xilinx.txt b/Documentation/powerpc/dts-bindings/xilinx.txt
new file mode 100644
index 000000000000..80339fe4300b
--- /dev/null
+++ b/Documentation/powerpc/dts-bindings/xilinx.txt
@@ -0,0 +1,295 @@
+   d) Xilinx IP cores
+
+   The Xilinx EDK toolchain ships with a set of IP cores (devices) for use
+   in Xilinx Spartan and Virtex FPGAs.  The devices cover the whole range
+   of standard device types (network, serial, etc.) and miscellaneous
+   devices (gpio, LCD, spi, etc).  Also, since these devices are
+   implemented within the fpga fabric every instance of the device can be
+   synthesised with different options that change the behaviour.
+
+   Each IP-core has a set of parameters which the FPGA designer can use to
+   control how the core is synthesized.  Historically, the EDK tool would
+   extract the device parameters relevant to device drivers and copy them
+   into an 'xparameters.h' in the form of #define symbols.  This tells the
+   device drivers how the IP cores are configured, but it requres the kernel
+   to be recompiled every time the FPGA bitstream is resynthesized.
+
+   The new approach is to export the parameters into the device tree and
+   generate a new device tree each time the FPGA bitstream changes.  The
+   parameters which used to be exported as #defines will now become
+   properties of the device node.  In general, device nodes for IP-cores
+   will take the following form:
+
+	(name): (generic-name)@(base-address) {
+		compatible = "xlnx,(ip-core-name)-(HW_VER)"
+			     [, (list of compatible devices), ...];
+		reg = <(baseaddr) (size)>;
+		interrupt-parent = <&interrupt-controller-phandle>;
+		interrupts = < ... >;
+		xlnx,(parameter1) = "(string-value)";
+		xlnx,(parameter2) = <(int-value)>;
+	};
+
+	(generic-name):   an open firmware-style name that describes the
+			generic class of device.  Preferably, this is one word, such
+			as 'serial' or 'ethernet'.
+	(ip-core-name):	the name of the ip block (given after the BEGIN
+			directive in system.mhs).  Should be in lowercase
+			and all underscores '_' converted to dashes '-'.
+	(name):		is derived from the "PARAMETER INSTANCE" value.
+	(parameter#):	C_* parameters from system.mhs.  The C_ prefix is
+			dropped from the parameter name, the name is converted
+			to lowercase and all underscore '_' characters are
+			converted to dashes '-'.
+	(baseaddr):	the baseaddr parameter value (often named C_BASEADDR).
+	(HW_VER):	from the HW_VER parameter.
+	(size):		the address range size (often C_HIGHADDR - C_BASEADDR + 1).
+
+   Typically, the compatible list will include the exact IP core version
+   followed by an older IP core version which implements the same
+   interface or any other device with the same interface.
+
+   'reg', 'interrupt-parent' and 'interrupts' are all optional properties.
+
+   For example, the following block from system.mhs:
+
+	BEGIN opb_uartlite
+		PARAMETER INSTANCE = opb_uartlite_0
+		PARAMETER HW_VER = 1.00.b
+		PARAMETER C_BAUDRATE = 115200
+		PARAMETER C_DATA_BITS = 8
+		PARAMETER C_ODD_PARITY = 0
+		PARAMETER C_USE_PARITY = 0
+		PARAMETER C_CLK_FREQ = 50000000
+		PARAMETER C_BASEADDR = 0xEC100000
+		PARAMETER C_HIGHADDR = 0xEC10FFFF
+		BUS_INTERFACE SOPB = opb_7
+		PORT OPB_Clk = CLK_50MHz
+		PORT Interrupt = opb_uartlite_0_Interrupt
+		PORT RX = opb_uartlite_0_RX
+		PORT TX = opb_uartlite_0_TX
+		PORT OPB_Rst = sys_bus_reset_0
+	END
+
+   becomes the following device tree node:
+
+	opb_uartlite_0: serial@ec100000 {
+		device_type = "serial";
+		compatible = "xlnx,opb-uartlite-1.00.b";
+		reg = <ec100000 10000>;
+		interrupt-parent = <&opb_intc_0>;
+		interrupts = <1 0>; // got this from the opb_intc parameters
+		current-speed = <d#115200>;	// standard serial device prop
+		clock-frequency = <d#50000000>;	// standard serial device prop
+		xlnx,data-bits = <8>;
+		xlnx,odd-parity = <0>;
+		xlnx,use-parity = <0>;
+	};
+
+   Some IP cores actually implement 2 or more logical devices.  In
+   this case, the device should still describe the whole IP core with
+   a single node and add a child node for each logical device.  The
+   ranges property can be used to translate from parent IP-core to the
+   registers of each device.  In addition, the parent node should be
+   compatible with the bus type 'xlnx,compound', and should contain
+   #address-cells and #size-cells, as with any other bus.  (Note: this
+   makes the assumption that both logical devices have the same bus
+   binding.  If this is not true, then separate nodes should be used
+   for each logical device).  The 'cell-index' property can be used to
+   enumerate logical devices within an IP core.  For example, the
+   following is the system.mhs entry for the dual ps2 controller found
+   on the ml403 reference design.
+
+	BEGIN opb_ps2_dual_ref
+		PARAMETER INSTANCE = opb_ps2_dual_ref_0
+		PARAMETER HW_VER = 1.00.a
+		PARAMETER C_BASEADDR = 0xA9000000
+		PARAMETER C_HIGHADDR = 0xA9001FFF
+		BUS_INTERFACE SOPB = opb_v20_0
+		PORT Sys_Intr1 = ps2_1_intr
+		PORT Sys_Intr2 = ps2_2_intr
+		PORT Clkin1 = ps2_clk_rx_1
+		PORT Clkin2 = ps2_clk_rx_2
+		PORT Clkpd1 = ps2_clk_tx_1
+		PORT Clkpd2 = ps2_clk_tx_2
+		PORT Rx1 = ps2_d_rx_1
+		PORT Rx2 = ps2_d_rx_2
+		PORT Txpd1 = ps2_d_tx_1
+		PORT Txpd2 = ps2_d_tx_2
+	END
+
+   It would result in the following device tree nodes:
+
+	opb_ps2_dual_ref_0: opb-ps2-dual-ref@a9000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "xlnx,compound";
+		ranges = <0 a9000000 2000>;
+		// If this device had extra parameters, then they would
+		// go here.
+		ps2@0 {
+			compatible = "xlnx,opb-ps2-dual-ref-1.00.a";
+			reg = <0 40>;
+			interrupt-parent = <&opb_intc_0>;
+			interrupts = <3 0>;
+			cell-index = <0>;
+		};
+		ps2@1000 {
+			compatible = "xlnx,opb-ps2-dual-ref-1.00.a";
+			reg = <1000 40>;
+			interrupt-parent = <&opb_intc_0>;
+			interrupts = <3 0>;
+			cell-index = <0>;
+		};
+	};
+
+   Also, the system.mhs file defines bus attachments from the processor
+   to the devices.  The device tree structure should reflect the bus
+   attachments.  Again an example; this system.mhs fragment:
+
+	BEGIN ppc405_virtex4
+		PARAMETER INSTANCE = ppc405_0
+		PARAMETER HW_VER = 1.01.a
+		BUS_INTERFACE DPLB = plb_v34_0
+		BUS_INTERFACE IPLB = plb_v34_0
+	END
+
+	BEGIN opb_intc
+		PARAMETER INSTANCE = opb_intc_0
+		PARAMETER HW_VER = 1.00.c
+		PARAMETER C_BASEADDR = 0xD1000FC0
+		PARAMETER C_HIGHADDR = 0xD1000FDF
+		BUS_INTERFACE SOPB = opb_v20_0
+	END
+
+	BEGIN opb_uart16550
+		PARAMETER INSTANCE = opb_uart16550_0
+		PARAMETER HW_VER = 1.00.d
+		PARAMETER C_BASEADDR = 0xa0000000
+		PARAMETER C_HIGHADDR = 0xa0001FFF
+		BUS_INTERFACE SOPB = opb_v20_0
+	END
+
+	BEGIN plb_v34
+		PARAMETER INSTANCE = plb_v34_0
+		PARAMETER HW_VER = 1.02.a
+	END
+
+	BEGIN plb_bram_if_cntlr
+		PARAMETER INSTANCE = plb_bram_if_cntlr_0
+		PARAMETER HW_VER = 1.00.b
+		PARAMETER C_BASEADDR = 0xFFFF0000
+		PARAMETER C_HIGHADDR = 0xFFFFFFFF
+		BUS_INTERFACE SPLB = plb_v34_0
+	END
+
+	BEGIN plb2opb_bridge
+		PARAMETER INSTANCE = plb2opb_bridge_0
+		PARAMETER HW_VER = 1.01.a
+		PARAMETER C_RNG0_BASEADDR = 0x20000000
+		PARAMETER C_RNG0_HIGHADDR = 0x3FFFFFFF
+		PARAMETER C_RNG1_BASEADDR = 0x60000000
+		PARAMETER C_RNG1_HIGHADDR = 0x7FFFFFFF
+		PARAMETER C_RNG2_BASEADDR = 0x80000000
+		PARAMETER C_RNG2_HIGHADDR = 0xBFFFFFFF
+		PARAMETER C_RNG3_BASEADDR = 0xC0000000
+		PARAMETER C_RNG3_HIGHADDR = 0xDFFFFFFF
+		BUS_INTERFACE SPLB = plb_v34_0
+		BUS_INTERFACE MOPB = opb_v20_0
+	END
+
+   Gives this device tree (some properties removed for clarity):
+
+	plb@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "xlnx,plb-v34-1.02.a";
+		device_type = "ibm,plb";
+		ranges; // 1:1 translation
+
+		plb_bram_if_cntrl_0: bram@ffff0000 {
+			reg = <ffff0000 10000>;
+		}
+
+		opb@20000000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <20000000 20000000 20000000
+				  60000000 60000000 20000000
+				  80000000 80000000 40000000
+				  c0000000 c0000000 20000000>;
+
+			opb_uart16550_0: serial@a0000000 {
+				reg = <a00000000 2000>;
+			};
+
+			opb_intc_0: interrupt-controller@d1000fc0 {
+				reg = <d1000fc0 20>;
+			};
+		};
+	};
+
+   That covers the general approach to binding xilinx IP cores into the
+   device tree.  The following are bindings for specific devices:
+
+      i) Xilinx ML300 Framebuffer
+
+      Simple framebuffer device from the ML300 reference design (also on the
+      ML403 reference design as well as others).
+
+      Optional properties:
+       - resolution = <xres yres> : pixel resolution of framebuffer.  Some
+                                    implementations use a different resolution.
+                                    Default is <d#640 d#480>
+       - virt-resolution = <xvirt yvirt> : Size of framebuffer in memory.
+                                           Default is <d#1024 d#480>.
+       - rotate-display (empty) : rotate display 180 degrees.
+
+      ii) Xilinx SystemACE
+
+      The Xilinx SystemACE device is used to program FPGAs from an FPGA
+      bitstream stored on a CF card.  It can also be used as a generic CF
+      interface device.
+
+      Optional properties:
+       - 8-bit (empty) : Set this property for SystemACE in 8 bit mode
+
+      iii) Xilinx EMAC and Xilinx TEMAC
+
+      Xilinx Ethernet devices.  In addition to general xilinx properties
+      listed above, nodes for these devices should include a phy-handle
+      property, and may include other common network device properties
+      like local-mac-address.
+
+      iv) Xilinx Uartlite
+
+      Xilinx uartlite devices are simple fixed speed serial ports.
+
+      Required properties:
+       - current-speed : Baud rate of uartlite
+
+      v) Xilinx hwicap
+
+		Xilinx hwicap devices provide access to the configuration logic
+		of the FPGA through the Internal Configuration Access Port
+		(ICAP).  The ICAP enables partial reconfiguration of the FPGA,
+		readback of the configuration information, and some control over
+		'warm boots' of the FPGA fabric.
+
+		Required properties:
+		- xlnx,family : The family of the FPGA, necessary since the
+                      capabilities of the underlying ICAP hardware
+                      differ between different families.  May be
+                      'virtex2p', 'virtex4', or 'virtex5'.
+
+      vi) Xilinx Uart 16550
+
+      Xilinx UART 16550 devices are very similar to the NS16550 but with
+      different register spacing and an offset from the base address.
+
+      Required properties:
+       - clock-frequency : Frequency of the clock input
+       - reg-offset : A value of 3 is required
+       - reg-shift : A value of 2 is required
+
+
diff --git a/Documentation/sound/alsa/HD-Audio-Models.txt b/Documentation/sound/alsa/HD-Audio-Models.txt
index 0d8d23581c44..939a3dd58148 100644
--- a/Documentation/sound/alsa/HD-Audio-Models.txt
+++ b/Documentation/sound/alsa/HD-Audio-Models.txt
@@ -240,6 +240,7 @@ AD1986A
   laptop-automute 2-channel with EAPD and HP-automute (Lenovo N100)
   ultra		2-channel with EAPD (Samsung Ultra tablet PC)
   samsung	2-channel with EAPD (Samsung R65)
+  samsung-p50	2-channel with HP-automute (Samsung P50)
 
 AD1988/AD1988B/AD1989A/AD1989B
 ==============================
diff --git a/Documentation/spi/spidev_test.c b/Documentation/spi/spidev_test.c
index cf0e3ce0d526..c1a5aad3c75a 100644
--- a/Documentation/spi/spidev_test.c
+++ b/Documentation/spi/spidev_test.c
@@ -99,11 +99,13 @@ void parse_opts(int argc, char *argv[])
 			{ "lsb",     0, 0, 'L' },
 			{ "cs-high", 0, 0, 'C' },
 			{ "3wire",   0, 0, '3' },
+			{ "no-cs",   0, 0, 'N' },
+			{ "ready",   0, 0, 'R' },
 			{ NULL, 0, 0, 0 },
 		};
 		int c;
 
-		c = getopt_long(argc, argv, "D:s:d:b:lHOLC3", lopts, NULL);
+		c = getopt_long(argc, argv, "D:s:d:b:lHOLC3NR", lopts, NULL);
 
 		if (c == -1)
 			break;
@@ -139,6 +141,12 @@ void parse_opts(int argc, char *argv[])
 		case '3':
 			mode |= SPI_3WIRE;
 			break;
+		case 'N':
+			mode |= SPI_NO_CS;
+			break;
+		case 'R':
+			mode |= SPI_READY;
+			break;
 		default:
 			print_usage(argv[0]);
 			break;
diff --git a/Documentation/video4linux/CARDLIST.em28xx b/Documentation/video4linux/CARDLIST.em28xx
index 873630e7e53e..014d255231fc 100644
--- a/Documentation/video4linux/CARDLIST.em28xx
+++ b/Documentation/video4linux/CARDLIST.em28xx
@@ -66,3 +66,4 @@
  68 -> Terratec AV350                           (em2860)        [0ccd:0084]
  69 -> KWorld ATSC 315U HDTV TV Box             (em2882)        [eb1a:a313]
  70 -> Evga inDtube                             (em2882)
+ 71 -> Silvercrest Webcam 1.3mpix               (em2820/em2840)
diff --git a/Documentation/x86/00-INDEX b/Documentation/x86/00-INDEX
index dbe3377754af..f37b46d34861 100644
--- a/Documentation/x86/00-INDEX
+++ b/Documentation/x86/00-INDEX
@@ -2,3 +2,5 @@
 	- this file
 mtrr.txt
 	- how to use x86 Memory Type Range Registers to increase performance
+exception-tables.txt
+	- why and how Linux kernel uses exception tables on x86
diff --git a/Documentation/exception.txt b/Documentation/x86/exception-tables.txt
index 2d5aded64247..32901aa36f0a 100644
--- a/Documentation/exception.txt
+++ b/Documentation/x86/exception-tables.txt
@@ -1,123 +1,123 @@
-     Kernel level exception handling in Linux 2.1.8
+     Kernel level exception handling in Linux
   Commentary by Joerg Pommnitz <joerg@raleigh.ibm.com>
 
-When a process runs in kernel mode, it often has to access user 
-mode memory whose address has been passed by an untrusted program. 
+When a process runs in kernel mode, it often has to access user
+mode memory whose address has been passed by an untrusted program.
 To protect itself the kernel has to verify this address.
 
-In older versions of Linux this was done with the 
-int verify_area(int type, const void * addr, unsigned long size) 
+In older versions of Linux this was done with the
+int verify_area(int type, const void * addr, unsigned long size)
 function (which has since been replaced by access_ok()).
 
-This function verified that the memory area starting at address 
+This function verified that the memory area starting at address
 'addr' and of size 'size' was accessible for the operation specified
-in type (read or write). To do this, verify_read had to look up the 
-virtual memory area (vma) that contained the address addr. In the 
-normal case (correctly working program), this test was successful. 
+in type (read or write). To do this, verify_read had to look up the
+virtual memory area (vma) that contained the address addr. In the
+normal case (correctly working program), this test was successful.
 It only failed for a few buggy programs. In some kernel profiling
 tests, this normally unneeded verification used up a considerable
 amount of time.
 
-To overcome this situation, Linus decided to let the virtual memory 
+To overcome this situation, Linus decided to let the virtual memory
 hardware present in every Linux-capable CPU handle this test.
 
 How does this work?
 
-Whenever the kernel tries to access an address that is currently not 
-accessible, the CPU generates a page fault exception and calls the 
-page fault handler 
+Whenever the kernel tries to access an address that is currently not
+accessible, the CPU generates a page fault exception and calls the
+page fault handler
 
 void do_page_fault(struct pt_regs *regs, unsigned long error_code)
 
-in arch/i386/mm/fault.c. The parameters on the stack are set up by 
-the low level assembly glue in arch/i386/kernel/entry.S. The parameter
-regs is a pointer to the saved registers on the stack, error_code 
+in arch/x86/mm/fault.c. The parameters on the stack are set up by
+the low level assembly glue in arch/x86/kernel/entry_32.S. The parameter
+regs is a pointer to the saved registers on the stack, error_code
 contains a reason code for the exception.
 
-do_page_fault first obtains the unaccessible address from the CPU 
-control register CR2. If the address is within the virtual address 
-space of the process, the fault probably occurred, because the page 
-was not swapped in, write protected or something similar. However, 
-we are interested in the other case: the address is not valid, there 
-is no vma that contains this address. In this case, the kernel jumps 
-to the bad_area label. 
-
-There it uses the address of the instruction that caused the exception 
-(i.e. regs->eip) to find an address where the execution can continue 
-(fixup). If this search is successful, the fault handler modifies the 
-return address (again regs->eip) and returns. The execution will 
+do_page_fault first obtains the unaccessible address from the CPU
+control register CR2. If the address is within the virtual address
+space of the process, the fault probably occurred, because the page
+was not swapped in, write protected or something similar. However,
+we are interested in the other case: the address is not valid, there
+is no vma that contains this address. In this case, the kernel jumps
+to the bad_area label.
+
+There it uses the address of the instruction that caused the exception
+(i.e. regs->eip) to find an address where the execution can continue
+(fixup). If this search is successful, the fault handler modifies the
+return address (again regs->eip) and returns. The execution will
 continue at the address in fixup.
 
 Where does fixup point to?
 
-Since we jump to the contents of fixup, fixup obviously points 
-to executable code. This code is hidden inside the user access macros. 
-I have picked the get_user macro defined in include/asm/uaccess.h as an
-example. The definition is somewhat hard to follow, so let's peek at 
+Since we jump to the contents of fixup, fixup obviously points
+to executable code. This code is hidden inside the user access macros.
+I have picked the get_user macro defined in arch/x86/include/asm/uaccess.h
+as an example. The definition is somewhat hard to follow, so let's peek at
 the code generated by the preprocessor and the compiler. I selected
-the get_user call in drivers/char/console.c for a detailed examination.
+the get_user call in drivers/char/sysrq.c for a detailed examination.
 
-The original code in console.c line 1405:
+The original code in sysrq.c line 587:
         get_user(c, buf);
 
 The preprocessor output (edited to become somewhat readable):
 
 (
-  {        
-    long __gu_err = - 14 , __gu_val = 0;        
-    const __typeof__(*( (  buf ) )) *__gu_addr = ((buf));        
-    if (((((0 + current_set[0])->tss.segment) == 0x18 )  || 
-       (((sizeof(*(buf))) <= 0xC0000000UL) && 
-       ((unsigned long)(__gu_addr ) <= 0xC0000000UL - (sizeof(*(buf)))))))        
+  {
+    long __gu_err = - 14 , __gu_val = 0;
+    const __typeof__(*( (  buf ) )) *__gu_addr = ((buf));
+    if (((((0 + current_set[0])->tss.segment) == 0x18 )  ||
+       (((sizeof(*(buf))) <= 0xC0000000UL) &&
+       ((unsigned long)(__gu_addr ) <= 0xC0000000UL - (sizeof(*(buf)))))))
       do {
-        __gu_err  = 0;        
-        switch ((sizeof(*(buf)))) {        
-          case 1: 
-            __asm__ __volatile__(        
-              "1:      mov" "b" " %2,%" "b" "1\n"        
-              "2:\n"        
-              ".section .fixup,\"ax\"\n"        
-              "3:      movl %3,%0\n"        
-              "        xor" "b" " %" "b" "1,%" "b" "1\n"        
-              "        jmp 2b\n"        
-              ".section __ex_table,\"a\"\n"        
-              "        .align 4\n"        
-              "        .long 1b,3b\n"        
+        __gu_err  = 0;
+        switch ((sizeof(*(buf)))) {
+          case 1:
+            __asm__ __volatile__(
+              "1:      mov" "b" " %2,%" "b" "1\n"
+              "2:\n"
+              ".section .fixup,\"ax\"\n"
+              "3:      movl %3,%0\n"
+              "        xor" "b" " %" "b" "1,%" "b" "1\n"
+              "        jmp 2b\n"
+              ".section __ex_table,\"a\"\n"
+              "        .align 4\n"
+              "        .long 1b,3b\n"
               ".text"        : "=r"(__gu_err), "=q" (__gu_val): "m"((*(struct __large_struct *)
-                            (   __gu_addr   )) ), "i"(- 14 ), "0"(  __gu_err  )) ; 
-              break;        
-          case 2: 
+                            (   __gu_addr   )) ), "i"(- 14 ), "0"(  __gu_err  )) ;
+              break;
+          case 2:
             __asm__ __volatile__(
-              "1:      mov" "w" " %2,%" "w" "1\n"        
-              "2:\n"        
-              ".section .fixup,\"ax\"\n"        
-              "3:      movl %3,%0\n"        
-              "        xor" "w" " %" "w" "1,%" "w" "1\n"        
-              "        jmp 2b\n"        
-              ".section __ex_table,\"a\"\n"        
-              "        .align 4\n"        
-              "        .long 1b,3b\n"        
+              "1:      mov" "w" " %2,%" "w" "1\n"
+              "2:\n"
+              ".section .fixup,\"ax\"\n"
+              "3:      movl %3,%0\n"
+              "        xor" "w" " %" "w" "1,%" "w" "1\n"
+              "        jmp 2b\n"
+              ".section __ex_table,\"a\"\n"
+              "        .align 4\n"
+              "        .long 1b,3b\n"
               ".text"        : "=r"(__gu_err), "=r" (__gu_val) : "m"((*(struct __large_struct *)
-                            (   __gu_addr   )) ), "i"(- 14 ), "0"(  __gu_err  )); 
-              break;        
-          case 4: 
-            __asm__ __volatile__(        
-              "1:      mov" "l" " %2,%" "" "1\n"        
-              "2:\n"        
-              ".section .fixup,\"ax\"\n"        
-              "3:      movl %3,%0\n"        
-              "        xor" "l" " %" "" "1,%" "" "1\n"        
-              "        jmp 2b\n"        
-              ".section __ex_table,\"a\"\n"        
-              "        .align 4\n"        "        .long 1b,3b\n"        
+                            (   __gu_addr   )) ), "i"(- 14 ), "0"(  __gu_err  ));
+              break;
+          case 4:
+            __asm__ __volatile__(
+              "1:      mov" "l" " %2,%" "" "1\n"
+              "2:\n"
+              ".section .fixup,\"ax\"\n"
+              "3:      movl %3,%0\n"
+              "        xor" "l" " %" "" "1,%" "" "1\n"
+              "        jmp 2b\n"
+              ".section __ex_table,\"a\"\n"
+              "        .align 4\n"        "        .long 1b,3b\n"
               ".text"        : "=r"(__gu_err), "=r" (__gu_val) : "m"((*(struct __large_struct *)
-                            (   __gu_addr   )) ), "i"(- 14 ), "0"(__gu_err)); 
-              break;        
-          default: 
-            (__gu_val) = __get_user_bad();        
-        }        
-      } while (0) ;        
-    ((c)) = (__typeof__(*((buf))))__gu_val;        
+                            (   __gu_addr   )) ), "i"(- 14 ), "0"(__gu_err));
+              break;
+          default:
+            (__gu_val) = __get_user_bad();
+        }
+      } while (0) ;
+    ((c)) = (__typeof__(*((buf))))__gu_val;
     __gu_err;
   }
 );
@@ -127,12 +127,12 @@ see what code gcc generates:
 
  >         xorl %edx,%edx
  >         movl current_set,%eax
- >         cmpl $24,788(%eax)        
- >         je .L1424        
+ >         cmpl $24,788(%eax)
+ >         je .L1424
  >         cmpl $-1073741825,64(%esp)
- >         ja .L1423                
+ >         ja .L1423
  > .L1424:
- >         movl %edx,%eax                        
+ >         movl %edx,%eax
  >         movl 64(%esp),%ebx
  > #APP
  > 1:      movb (%ebx),%dl                /* this is the actual user access */
@@ -149,17 +149,17 @@ see what code gcc generates:
  > .L1423:
  >         movzbl %dl,%esi
 
-The optimizer does a good job and gives us something we can actually 
-understand. Can we? The actual user access is quite obvious. Thanks 
-to the unified address space we can just access the address in user 
+The optimizer does a good job and gives us something we can actually
+understand. Can we? The actual user access is quite obvious. Thanks
+to the unified address space we can just access the address in user
 memory. But what does the .section stuff do?????
 
 To understand this we have to look at the final kernel:
 
  > objdump --section-headers vmlinux
- > 
+ >
  > vmlinux:     file format elf32-i386
- > 
+ >
  > Sections:
  > Idx Name          Size      VMA       LMA       File off  Algn
  >   0 .text         00098f40  c0100000  c0100000  00001000  2**4
@@ -198,18 +198,18 @@ final kernel executable:
 
 The whole user memory access is reduced to 10 x86 machine instructions.
 The instructions bracketed in the .section directives are no longer
-in the normal execution path. They are located in a different section 
+in the normal execution path. They are located in a different section
 of the executable file:
 
  > objdump --disassemble --section=.fixup vmlinux
- > 
+ >
  > c0199ff5 <.fixup+10b5> movl   $0xfffffff2,%eax
  > c0199ffa <.fixup+10ba> xorb   %dl,%dl
  > c0199ffc <.fixup+10bc> jmp    c017e7a7 <do_con_write+e3>
 
 And finally:
  > objdump --full-contents --section=__ex_table vmlinux
- > 
+ >
  >  c01aa7c4 93c017c0 e09f19c0 97c017c0 99c017c0  ................
  >  c01aa7d4 f6c217c0 e99f19c0 a5e717c0 f59f19c0  ................
  >  c01aa7e4 080a18c0 01a019c0 0a0a18c0 04a019c0  ................
@@ -235,8 +235,8 @@ sections in the ELF object file. So the instructions
 ended up in the .fixup section of the object file and the addresses
         .long 1b,3b
 ended up in the __ex_table section of the object file. 1b and 3b
-are local labels. The local label 1b (1b stands for next label 1 
-backward) is the address of the instruction that might fault, i.e. 
+are local labels. The local label 1b (1b stands for next label 1
+backward) is the address of the instruction that might fault, i.e.
 in our case the address of the label 1 is c017e7a5:
 the original assembly code: > 1:      movb (%ebx),%dl
 and linked in vmlinux     : > c017e7a5 <do_con_write+e1> movb   (%ebx),%dl
@@ -254,7 +254,7 @@ The assembly code
 becomes the value pair
  >  c01aa7d4 c017c2f6 c0199fe9 c017e7a5 c0199ff5  ................
                                ^this is ^this is
-                               1b       3b 
+                               1b       3b
 c017e7a5,c0199ff5 in the exception table of the kernel.
 
 So, what actually happens if a fault from kernel mode with no suitable
@@ -266,9 +266,9 @@ vma occurs?
 3.) CPU calls do_page_fault
 4.) do page fault calls search_exception_table (regs->eip == c017e7a5);
 5.) search_exception_table looks up the address c017e7a5 in the
-    exception table (i.e. the contents of the ELF section __ex_table) 
+    exception table (i.e. the contents of the ELF section __ex_table)
     and returns the address of the associated fault handle code c0199ff5.
-6.) do_page_fault modifies its own return address to point to the fault 
+6.) do_page_fault modifies its own return address to point to the fault
     handle code and returns.
 7.) execution continues in the fault handling code.
 8.) 8a) EAX becomes -EFAULT (== -14)
diff --git a/MAINTAINERS b/MAINTAINERS
index fa2a16def17a..7b91c6e69d55 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -603,11 +603,32 @@ L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 W:	http://maxim.org.za/at91_26.html
 S:	Maintained
 
+ARM/BCMRING ARM ARCHITECTURE
+P:	Leo Chen <leochen@broadcom.com>
+P:	Scott Branden <sbranden@broadcom.com>
+L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
+S:	Maintained
+F:	arch/arm/mach-bcmring
+
+ARM/BCMRING MTD NAND DRIVER
+P:	Leo Chen <leochen@broadcom.com>
+P:	Scott Branden <sbranden@broadcom.com>
+L:	linux-mtd@lists.infradead.org
+S:	Maintained
+F:	drivers/mtd/nand/bcm_umi_nand.c
+F:	drivers/mtd/nand/bcm_umi_bch.c
+F:	drivers/mtd/nand/bcm_umi_hamming.c
+F:	drivers/mtd/nand/nand_bcm_umi.h
+
 ARM/CIRRUS LOGIC EP93XX ARM ARCHITECTURE
-P:	Lennert Buytenhek
-M:	kernel@wantstofly.org
+P:	Hartley Sweeten
+M:	hsweeten@visionengravers.com
+P:	Ryan Mallon
+M:	ryan@bluewatersys.com
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Maintained
+F:	arch/arm/mach-ep93xx/
+F:	arch/arm/mach-ep93xx/include/mach/
 
 ARM/CIRRUS LOGIC EDB9315A MACHINE SUPPORT
 P:	Lennert Buytenhek
@@ -867,12 +888,22 @@ M:	alex@shark-linux.de
 W:	http://www.shark-linux.de/shark.html
 S:	Maintained
 
+ARM/SAMSUNG ARM ARCHITECTURES
+P:	Ben Dooks
+M:	ben-linux@fluff.org
+L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
+W:	http://www.fluff.org/ben/linux/
+S:	Maintained
+F:	arch/arm/plat-s3c/
+F:	arch/arm/plat-s3c24xx/
+
 ARM/S3C2410 ARM ARCHITECTURE
 P:	Ben Dooks
 M:	ben-linux@fluff.org
 L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
 W:	http://www.fluff.org/ben/linux/
 S:	Maintained
+F:	arch/arm/mach-s3c2410/
 
 ARM/S3C2440 ARM ARCHITECTURE
 P:	Ben Dooks
@@ -880,6 +911,39 @@ M:	ben-linux@fluff.org
 L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
 W:	http://www.fluff.org/ben/linux/
 S:	Maintained
+F:	arch/arm/mach-s3c2440/
+
+ARM/S3C2442 ARM ARCHITECTURE
+P:	Ben Dooks
+M:	ben-linux@fluff.org
+L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
+W:	http://www.fluff.org/ben/linux/
+S:	Maintained
+F:	arch/arm/mach-s3c2442/
+
+ARM/S3C2443 ARM ARCHITECTURE
+P:	Ben Dooks
+M:	ben-linux@fluff.org
+L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
+W:	http://www.fluff.org/ben/linux/
+S:	Maintained
+F:	arch/arm/mach-s3c2443/
+
+ARM/S3C6400 ARM ARCHITECTURE
+P:	Ben Dooks
+M:	ben-linux@fluff.org
+L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
+W:	http://www.fluff.org/ben/linux/
+S:	Maintained
+F:	arch/arm/mach-s3c6400/
+
+ARM/S3C6410 ARM ARCHITECTURE
+P:	Ben Dooks
+M:	ben-linux@fluff.org
+L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
+W:	http://www.fluff.org/ben/linux/
+S:	Maintained
+F:	arch/arm/mach-s3c6410/
 
 ARM/TECHNOLOGIC SYSTEMS TS7250 MACHINE SUPPORT
 P:	Lennert Buytenhek
@@ -2087,9 +2151,9 @@ F:	drivers/edac/i5400_edac.c
 
 EDAC-I82975X
 P:	Ranganathan Desikan
-M:	rdesikan@jetzbroadband.com
+M:	ravi@jetztechnologies.com
 P:	Arvind R.
-M:	arvind@acarlab.com
+M:	arvind@jetztechnologies.com
 L:	bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
 W:	bluesmoke.sourceforge.net
 S:	Maintained
@@ -2808,7 +2872,9 @@ S:	Maintained
 
 IA64 (Itanium) PLATFORM
 P:	Tony Luck
+P:	Fenghua Yu
 M:	tony.luck@intel.com
+M:	fenghua.yu@intel.com
 L:	linux-ia64@vger.kernel.org
 W:	http://www.ia64-linux.org/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6.git
@@ -2886,7 +2952,7 @@ P:	Dmitry Eremin-Solenikov
 M:	dbaryshkov@gmail.com
 P:	Sergey Lapin
 M:	slapin@ossfans.org
-L:	linux-zigbee-devel@lists.sourceforge.net
+L:	linux-zigbee-devel@lists.sourceforge.net (moderated for non-subscribers)
 W:	http://apps.sourceforge.net/trac/linux-zigbee
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/lowpan/lowpan.git
 S:	Maintained
@@ -4362,7 +4428,7 @@ W:	http://www.nongnu.org/orinoco/
 S:	Maintained
 F:	drivers/net/wireless/orinoco/
 
-OSD LIBRARY
+OSD LIBRARY and FILESYSTEM
 P:	Boaz Harrosh
 M:	bharrosh@panasas.com
 P:	Benny Halevy
@@ -4371,6 +4437,9 @@ L:	osd-dev@open-osd.org
 W:	http://open-osd.org
 T:	git git://git.open-osd.org/open-osd.git
 S:	Maintained
+F:	drivers/scsi/osd/
+F:	drivers/include/scsi/osd_*
+F:	fs/exofs/
 
 P54 WIRELESS DRIVER
 P:	Michael Wu
@@ -5533,8 +5602,8 @@ F:	drivers/staging/
 
 STARFIRE/DURALAN NETWORK DRIVER
 P:	Ion Badulescu
-M:	ionut@cs.columbia.edu
-S:	Maintained
+M:	ionut@badula.org
+S:	Odd Fixes
 F:	drivers/net/starfire*
 
 STARMODE RADIO IP (STRIP) PROTOCOL DRIVER
@@ -5668,6 +5737,13 @@ F:	drivers/misc/tifm*
 F:	drivers/mmc/host/tifm_sd.c
 F:	include/linux/tifm.h
 
+TI TWL4030 SERIES SOC CODEC DRIVER
+P:	Peter Ujfalusi
+M:	peter.ujfalusi@nokia.com
+L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
+S:	Maintained
+F:	sound/soc/codecs/twl4030*
+
 TIPC NETWORK LAYER
 P:	Per Liden
 M:	per.liden@ericsson.com
@@ -5751,17 +5827,17 @@ P:	Jiri Kosina
 M:	trivial@kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial.git
 S:	Maintained
-F:	drivers/char/tty_*
-F:	drivers/serial/serial_core.c
-F:	include/linux/serial_core.h
-F:	include/linux/serial.h
-F:	include/linux/tty.h
 
 TTY LAYER
 P:	Alan Cox
 M:	alan@lxorguk.ukuu.org.uk
 S:	Maintained
 T:	stgit http://zeniv.linux.org.uk/~alan/ttydev/
+F:	drivers/char/tty_*
+F:	drivers/serial/serial_core.c
+F:	include/linux/serial_core.h
+F:	include/linux/serial.h
+F:	include/linux/tty.h
 
 TULIP NETWORK DRIVERS
 P:	Grant Grundler
@@ -5799,7 +5875,7 @@ UBI FILE SYSTEM (UBIFS)
 P:	Artem Bityutskiy
 M:	dedekind@infradead.org
 P:	Adrian Hunter
-M:	ext-adrian.hunter@nokia.com
+M:	adrian.hunter@nokia.com
 L:	linux-mtd@lists.infradead.org
 T:	git git://git.infradead.org/ubifs-2.6.git
 W:	http://www.linux-mtd.infradead.org/doc/ubifs.html
diff --git a/Makefile b/Makefile
index d1216fea0c92..0aeec59c1f0a 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 31
-EXTRAVERSION = -rc1
+EXTRAVERSION = -rc2
 NAME = Man-Eating Seals of Antiquity
 
 # *DOCUMENTATION*
@@ -140,15 +140,13 @@ _all: modules
 endif
 
 srctree		:= $(if $(KBUILD_SRC),$(KBUILD_SRC),$(CURDIR))
-TOPDIR		:= $(srctree)
-# FIXME - TOPDIR is obsolete, use srctree/objtree
 objtree		:= $(CURDIR)
 src		:= $(srctree)
 obj		:= $(objtree)
 
 VPATH		:= $(srctree)$(if $(KBUILD_EXTMOD),:$(KBUILD_EXTMOD))
 
-export srctree objtree VPATH TOPDIR
+export srctree objtree VPATH
 
 
 # SUBARCH tells the usermode build what the underlying arch is.  That is set
@@ -344,7 +342,8 @@ KBUILD_CPPFLAGS := -D__KERNEL__
 
 KBUILD_CFLAGS   := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \
 		   -fno-strict-aliasing -fno-common \
-		   -Werror-implicit-function-declaration
+		   -Werror-implicit-function-declaration \
+		   -Wno-format-security
 KBUILD_AFLAGS   := -D__ASSEMBLY__
 
 # Read KERNELRELEASE from include/config/kernel.release (if it exists)
diff --git a/arch/alpha/include/asm/percpu.h b/arch/alpha/include/asm/percpu.h
index 06c5c7a4afd3..b663f1f10b6a 100644
--- a/arch/alpha/include/asm/percpu.h
+++ b/arch/alpha/include/asm/percpu.h
@@ -30,7 +30,7 @@ extern unsigned long __per_cpu_offset[NR_CPUS];
 
 #ifndef MODULE
 #define SHIFT_PERCPU_PTR(var, offset) RELOC_HIDE(&per_cpu_var(var), (offset))
-#define PER_CPU_ATTRIBUTES
+#define PER_CPU_DEF_ATTRIBUTES
 #else
 /*
  * To calculate addresses of locally defined variables, GCC uses 32-bit
@@ -49,7 +49,7 @@ extern unsigned long __per_cpu_offset[NR_CPUS];
 		: "=&r"(__ptr), "=&r"(tmp_gp));		\
 	(typeof(&per_cpu_var(var)))(__ptr + (offset)); })
 
-#define PER_CPU_ATTRIBUTES	__used
+#define PER_CPU_DEF_ATTRIBUTES	__used
 
 #endif /* MODULE */
 
@@ -71,7 +71,7 @@ extern unsigned long __per_cpu_offset[NR_CPUS];
 #define __get_cpu_var(var)		per_cpu_var(var)
 #define __raw_get_cpu_var(var)		per_cpu_var(var)
 
-#define PER_CPU_ATTRIBUTES
+#define PER_CPU_DEF_ATTRIBUTES
 
 #endif /* SMP */
 
diff --git a/arch/alpha/include/asm/thread_info.h b/arch/alpha/include/asm/thread_info.h
index d069526bd767..60c83abfde70 100644
--- a/arch/alpha/include/asm/thread_info.h
+++ b/arch/alpha/include/asm/thread_info.h
@@ -37,6 +37,7 @@ struct thread_info {
 	.task		= &tsk,			\
 	.exec_domain	= &default_exec_domain,	\
 	.addr_limit	= KERNEL_DS,		\
+	.preempt_count	= INIT_PREEMPT_COUNT,	\
 	.restart_block = {			\
 		.fn = do_no_restart_syscall,	\
 	},					\
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index aef63c8e3d2d..5d60508472f0 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -217,6 +217,7 @@ config ARCH_REALVIEW
 	select ICST307
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
+	select ARCH_WANT_OPTIONAL_GPIOLIB
 	help
 	  This enables support for ARM Ltd RealView boards.
 
@@ -229,6 +230,7 @@ config ARCH_VERSATILE
 	select ICST307
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
+	select ARCH_WANT_OPTIONAL_GPIOLIB
 	help
 	  This enables support for ARM Ltd Versatile board.
 
@@ -493,10 +495,18 @@ config ARCH_W90X900
 	select CPU_ARM926T
 	select ARCH_REQUIRE_GPIOLIB
 	select GENERIC_GPIO
+	select HAVE_CLK
 	select COMMON_CLKDEV
+	select GENERIC_TIME
+	select GENERIC_CLOCKEVENTS
 	help
-		Support for Nuvoton (Winbond logic dept.) ARM9 processor,You
-		can login www.mcuos.com or www.nuvoton.com to know more.
+	  Support for Nuvoton (Winbond logic dept.) ARM9 processor,
+	  At present, the w90x900 has been renamed nuc900, regarding
+	  the ARM series product line, you can login the following
+	  link address to know more.
+
+	  <http://www.nuvoton.com/hq/enu/ProductAndSales/ProductLines/
+		ConsumerElectronicsIC/ARMMicrocontroller/ARMMicrocontroller>
 
 config ARCH_PNX4008
 	bool "Philips Nexperia PNX4008 Mobile"
@@ -637,6 +647,18 @@ config ARCH_OMAP
 	help
 	  Support for TI's OMAP platform (OMAP1 and OMAP2).
 
+config ARCH_BCMRING
+	bool "Broadcom BCMRING"
+	depends on MMU
+	select CPU_V6
+	select ARM_AMBA
+	select COMMON_CLKDEV
+	select GENERIC_TIME
+	select GENERIC_CLOCKEVENTS
+	select ARCH_WANT_OPTIONAL_GPIOLIB
+	help
+	  Support for Broadcom's BCMRing platform.
+
 endchoice
 
 source "arch/arm/mach-clps711x/Kconfig"
@@ -730,6 +752,8 @@ source "arch/arm/mach-u300/Kconfig"
 
 source "arch/arm/mach-w90x900/Kconfig"
 
+source "arch/arm/mach-bcmring/Kconfig"
+
 # Definitions to make life easier
 config ARCH_ACORN
 	bool
@@ -1054,6 +1078,11 @@ config HIGHMEM
 
 	  If unsure, say n.
 
+config HIGHPTE
+	bool "Allocate 2nd-level pagetables from highmem"
+	depends on HIGHMEM
+	depends on !OUTER_CACHE
+
 source "mm/Kconfig"
 
 config LEDS
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index a71fd941ade7..a89e4734b8f0 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -99,14 +99,6 @@ config DEBUG_CLPS711X_UART2
 	  output to the second serial port on these devices.  Saying N will
 	  cause the debug messages to appear on the first serial port.
 
-config DEBUG_S3C_PORT
-	depends on DEBUG_LL && PLAT_S3C
-	bool "Kernel low-level debugging messages via S3C UART"
-	help
-	  Say Y here if you want debug print routines to go to one of the
-	  S3C internal UARTs. The chosen UART must have been configured
-	  before it is used.
-
 config DEBUG_S3C_UART
 	depends on PLAT_S3C
 	int "S3C UART to use for low-level debug"
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index c877d6df23d1..b9ae98b88a7e 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -112,6 +112,7 @@ endif
 # by CONFIG_* macro name.
 machine-$(CONFIG_ARCH_AAEC2000)		:= aaec2000
 machine-$(CONFIG_ARCH_AT91)		:= at91
+machine-$(CONFIG_ARCH_BCMRING)		:= bcmring
 machine-$(CONFIG_ARCH_CLPS711X)		:= clps711x
 machine-$(CONFIG_ARCH_DAVINCI)		:= davinci
 machine-$(CONFIG_ARCH_EBSA110)		:= ebsa110
diff --git a/arch/arm/configs/bcmring_defconfig b/arch/arm/configs/bcmring_defconfig
new file mode 100644
index 000000000000..bcc0bac551a5
--- /dev/null
+++ b/arch/arm/configs/bcmring_defconfig
@@ -0,0 +1,725 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.31-rc3
+# Fri Jul 17 12:07:28 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_EXTRA_PASS=y
+# CONFIG_HOTPLUG is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+# CONFIG_ELF_CORE is not set
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+# CONFIG_EPOLL is not set
+# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
+CONFIG_SHMEM=y
+# CONFIG_AIO is not set
+
+#
+# Performance Counters
+#
+# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_SLUB_DEBUG is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+CONFIG_ARCH_BCMRING=y
+# CONFIG_ARCH_FPGA11107 is not set
+CONFIG_ARCH_BCM11107=y
+
+#
+# BCMRING Options
+#
+CONFIG_BCM_ZRELADDR=0x8000
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_V6=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_32v6=y
+CONFIG_CPU_ABRT_EV6=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_V6=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V6=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+# CONFIG_ARM_ERRATA_411920 is not set
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+CONFIG_ARM_AMBA=y
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+CONFIG_UACCESS_WITH_MEMCPY=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0e000000
+CONFIG_ZBOOT_ROM_BSS=0x0ea00000
+CONFIG_ZBOOT_ROM=y
+CONFIG_CMDLINE=""
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_PACKET is not set
+# CONFIG_UNIX is not set
+# CONFIG_NET_KEY is not set
+# CONFIG_INET is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+# CONFIG_MTD_CFI_I2 is not set
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+CONFIG_MTD_NAND_BCM_UMI=y
+CONFIG_MTD_NAND_BCM_UMI_HWCS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_NETDEVICES is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+# CONFIG_CONSOLE_TRANSLATIONS is not set
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_AMBA_PL010 is not set
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=64
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_FILE_LOCKING is not set
+# CONFIG_FSNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+# CONFIG_PROC_PAGE_MONITOR is not set
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+CONFIG_JFFS2_FS_XATTR=y
+CONFIG_JFFS2_FS_POSIX_ACL=y
+# CONFIG_JFFS2_FS_SECURITY is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+CONFIG_HEADERS_CHECK=y
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_BUILD_DOCSRC is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_ARM_UNWIND is not set
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/kb9202_defconfig b/arch/arm/configs/kb9202_defconfig
index 8e74c66f239d..605a8462f172 100644
--- a/arch/arm/configs/kb9202_defconfig
+++ b/arch/arm/configs/kb9202_defconfig
@@ -1,109 +1,246 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.13-rc2
-# Sun Aug 14 19:26:59 2005
+# Linux kernel version: 2.6.30-rc8
+# Wed Jun  3 13:52:33 2009
 #
 CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_MMU=y
-CONFIG_UID16=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
-# CONFIG_EXPERIMENTAL is not set
-CONFIG_CLEAN_COMPILE=y
+CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
-# CONFIG_SYSVIPC is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+CONFIG_AUDIT=y
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-# CONFIG_KOBJECT_UEVENT is not set
-# CONFIG_IKCONFIG is not set
+CONFIG_ANON_INODES=y
 # CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_KALLSYMS_EXTRA_PASS=y
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_TRACEPOINTS=y
+CONFIG_MARKERS=y
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
 CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
-# Loadable module support
+# IO Schedulers
 #
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
 
 #
 # System Type
 #
-# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+CONFIG_ARCH_AT91=y
 # CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
 # CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
 # CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MMP is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_AAEC2000 is not set
-CONFIG_ARCH_AT91=y
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
+
+#
+# Atmel AT91 System-on-Chip
+#
 CONFIG_ARCH_AT91RM9200=y
+# CONFIG_ARCH_AT91SAM9260 is not set
+# CONFIG_ARCH_AT91SAM9261 is not set
+# CONFIG_ARCH_AT91SAM9263 is not set
+# CONFIG_ARCH_AT91SAM9RL is not set
+# CONFIG_ARCH_AT91SAM9G20 is not set
+# CONFIG_ARCH_AT91CAP9 is not set
+# CONFIG_ARCH_AT91X40 is not set
+CONFIG_AT91_PMC_UNIT=y
 
 #
-# AT91RM9200 Implementations
+# AT91RM9200 Board Type
 #
+# CONFIG_MACH_ONEARM is not set
 # CONFIG_ARCH_AT91RM9200DK is not set
 # CONFIG_MACH_AT91RM9200EK is not set
 # CONFIG_MACH_CSB337 is not set
 # CONFIG_MACH_CSB637 is not set
 # CONFIG_MACH_CARMEVA is not set
+# CONFIG_MACH_ATEB9200 is not set
 CONFIG_MACH_KB9200=y
+# CONFIG_MACH_PICOTUX2XX is not set
+# CONFIG_MACH_KAFA is not set
+# CONFIG_MACH_ECBAT91 is not set
+# CONFIG_MACH_YL9200 is not set
+
+#
+# AT91 Board Options
+#
+
+#
+# AT91 Feature Selections
+#
+CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
+CONFIG_AT91_TIMER_HZ=128
+CONFIG_AT91_EARLY_DBGU=y
+# CONFIG_AT91_EARLY_USART0 is not set
+# CONFIG_AT91_EARLY_USART1 is not set
+# CONFIG_AT91_EARLY_USART2 is not set
+# CONFIG_AT91_EARLY_USART3 is not set
+# CONFIG_AT91_EARLY_USART4 is not set
+# CONFIG_AT91_EARLY_USART5 is not set
 
 #
 # Processor Type
 #
 CONFIG_CPU_32=y
 CONFIG_CPU_ARM920T=y
-CONFIG_CPU_32v4=y
+CONFIG_CPU_32v4T=y
 CONFIG_CPU_ABRT_EV4T=y
+CONFIG_CPU_PABRT_NOIFAR=y
 CONFIG_CPU_CACHE_V4WT=y
 CONFIG_CPU_CACHE_VIVT=y
 CONFIG_CPU_COPY_V4WB=y
 CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
 
 #
 # Processor Features
@@ -112,23 +249,48 @@ CONFIG_ARM_THUMB=y
 # CONFIG_CPU_ICACHE_DISABLE is not set
 # CONFIG_CPU_DCACHE_DISABLE is not set
 # CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_OUTER_CACHE is not set
 
 #
 # Bus support
 #
-CONFIG_ISA_DMA_API=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 # CONFIG_PCCARD is not set
 
 #
 # Kernel Features
 #
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT=y
+CONFIG_HZ=128
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_HAS_HOLES_MEMORYMODEL is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 # CONFIG_LEDS is not set
 CONFIG_ALIGNMENT_TRAP=y
 
@@ -137,8 +299,16 @@ CONFIG_ALIGNMENT_TRAP=y
 #
 CONFIG_ZBOOT_ROM_TEXT=0x10000000
 CONFIG_ZBOOT_ROM_BSS=0x20040000
-CONFIG_ZBOOT_ROM=y
-CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/ram rw initrd=0x20210000,654933"
+# CONFIG_ZBOOT_ROM is not set
+CONFIG_CMDLINE="noinitrd root=/dev/mtdblock0 rootfstype=jffs2 mem=64M"
+# CONFIG_XIP_KERNEL is not set
+CONFIG_KEXEC=y
+CONFIG_ATAGS_PROC=y
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
 
 #
 # Floating point emulation
@@ -149,74 +319,251 @@ CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/ram rw initrd=0x20210000,654933"
 #
 CONFIG_FPE_NWFPE=y
 # CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
 
 #
 # Userspace binary formats
 #
 CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_AOUT=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
 CONFIG_BINFMT_MISC=y
-# CONFIG_ARTHUR is not set
 
 #
 # Power management options
 #
 # CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
 
 #
-# Device Drivers
+# Networking options
 #
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
-# Generic Driver Options
+# Network testing
 #
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-CONFIG_DEBUG_DRIVER=y
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_DROP_MONITOR is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
-# Memory Technology Devices (MTD)
+# Device Drivers
 #
-# CONFIG_MTD is not set
 
 #
-# Parallel port support
+# Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+CONFIG_MTD_NAND_ATMEL=y
+# CONFIG_MTD_NAND_ATMEL_ECC_HW is not set
+CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
+# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+CONFIG_MTD_UBI_GLUEBI=y
+
+#
+# UBI debugging options
+#
+# CONFIG_MTD_UBI_DEBUG is not set
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
-CONFIG_BLK_DEV_NBD=y
+# CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+CONFIG_ATMEL_TCLIB=y
+CONFIG_ATMEL_TCB_CLKSRC=y
+CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
+CONFIG_ATMEL_SSC=y
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
 
 #
-# IO Schedulers
+# EEPROM support
 #
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
 
 #
 # SCSI device support
 #
+# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
 CONFIG_SCSI_PROC_FS=y
 
 #
@@ -232,145 +579,87 @@ CONFIG_CHR_DEV_SG=y
 #
 # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
 #
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_SCSI_CONSTANTS=y
+CONFIG_SCSI_LOGGING=y
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
 
 #
-# SCSI Transport Attributes
+# SCSI Transports
 #
-# CONFIG_SCSI_SPI_ATTRS is not set
+CONFIG_SCSI_SPI_ATTRS=m
 # CONFIG_SCSI_FC_ATTRS is not set
 # CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
 # CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_IP_TCPDIAG is not set
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 CONFIG_ARM_AT91_ETHER=y
+# CONFIG_AX88796 is not set
 # CONFIG_SMC91X is not set
 # CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
 
 #
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
+# Wireless LAN
 #
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
 
 #
-# Wireless LAN (non-hamradio)
+# Enable WiMAX (Networking options) to see the WiMAX drivers
 #
-# CONFIG_NET_RADIO is not set
 
 #
-# Wan interfaces
+# USB Network Adapters
 #
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-
-#
-# ISDN subsystem
-#
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 # CONFIG_ISDN is not set
 
 #
 # Input device support
 #
 CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
 
 #
 # Userland interfaces
@@ -380,7 +669,6 @@ CONFIG_INPUT_MOUSEDEV=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
@@ -390,23 +678,25 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
 # CONFIG_INPUT_MISC is not set
 
 #
 # Hardware I/O ports
 #
-CONFIG_SERIO=y
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO is not set
 # CONFIG_GAMEPORT is not set
 
 #
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -419,215 +709,362 @@ CONFIG_HW_CONSOLE=y
 #
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_SERIAL_ATMEL_PDC=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
 
 #
-# IPMI
+# Memory mapped GPIO expanders:
 #
-# CONFIG_IPMI_HANDLER is not set
 
 #
-# Watchdog Cards
+# I2C GPIO expanders:
 #
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_AT91RM9200_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
 
 #
-# Ftape, the floppy tape device driver
+# PCI GPIO expanders:
 #
-# CONFIG_RAW_DRIVER is not set
 
 #
-# TPM devices
+# SPI GPIO expanders:
 #
-# CONFIG_AT91_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
 
 #
-# I2C support
+# Watchdog Device Drivers
 #
-# CONFIG_I2C is not set
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_AT91RM9200_WATCHDOG=y
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
-# Misc devices
+# Sonics Silicon Backplane
 #
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
 
 #
-# Digital Video Broadcasting Devices
+# Multimedia drivers
 #
-# CONFIG_DVB is not set
+# CONFIG_DAB is not set
 
 #
 # Graphics support
 #
-# CONFIG_FB is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_TILEBLITTING=y
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_GENERIC is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
 # Console display driver support
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+# CONFIG_FONT_8x8 is not set
+# CONFIG_FONT_8x16 is not set
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+CONFIG_FONT_MINI_4x6=y
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+# CONFIG_LOGO is not set
 # CONFIG_SOUND is not set
-
-#
-# USB support
-#
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-CONFIG_USB_DEBUG=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
 
 #
 # Miscellaneous USB options
 #
 CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
 
 #
 # USB Host Controller Drivers
 #
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
 CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
 
 #
 # USB Device Class drivers
 #
-# CONFIG_USB_BLUETOOTH_TTY is not set
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
-CONFIG_USB_STORAGE=y
-CONFIG_USB_STORAGE_DEBUG=y
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-
-#
-# USB Input Devices
-#
-# CONFIG_USB_HID is not set
 
 #
-# USB HID Boot Protocol drivers
+# also be needed; see USB_STORAGE Help for more info
 #
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_MTOUCH is not set
-# CONFIG_USB_ITMTOUCH is not set
-# CONFIG_USB_EGALAX is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+CONFIG_USB_LIBUSUAL=y
 
 #
 # USB Imaging devices
 #
+# CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
 
 #
-# USB Multimedia devices
+# USB port drivers
 #
-# CONFIG_USB_DABUSB is not set
+# CONFIG_USB_SERIAL is not set
 
 #
-# Video4Linux support is needed for USB Multimedia device support
+# USB Miscellaneous drivers
 #
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_GADGET is not set
 
 #
-# USB Network Adapters
+# OTG and related infrastructure
 #
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_USB_MON is not set
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
 
 #
-# USB port drivers
+# MMC/SD/SDIO Card Drivers
 #
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
 
 #
-# USB Serial Converter support
+# MMC/SD/SDIO Host Controller Drivers
 #
-# CONFIG_USB_SERIAL is not set
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_AT91=y
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
 
 #
-# USB Miscellaneous drivers
+# RTC interfaces
 #
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
-# CONFIG_USB_IDMOUSE is not set
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
 
 #
-# USB DSL modem support
+# SPI RTC drivers
 #
 
 #
-# USB Gadget Support
+# Platform RTC drivers
 #
-# CONFIG_USB_GADGET is not set
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
 
 #
-# MMC/SD Card support
+# on-CPU RTC drivers
 #
-# CONFIG_MMC is not set
+CONFIG_RTC_DRV_AT91RM9200=y
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
 #
 CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-# CONFIG_EXT2_FS_POSIX_ACL is not set
-# CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
 # CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_DNOTIFY is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
 
 #
-# XFS support
+# Caches
 #
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-CONFIG_AUTOFS_FS=y
-CONFIG_AUTOFS4_FS=y
+# CONFIG_FSCACHE is not set
 
 #
 # CD-ROM/DVD Filesystems
@@ -639,7 +1076,7 @@ CONFIG_AUTOFS4_FS=y
 # DOS/FAT/NT Filesystems
 #
 CONFIG_FAT_FS=y
-CONFIG_MSDOS_FS=y
+# CONFIG_MSDOS_FS is not set
 CONFIG_VFAT_FS=y
 CONFIG_FAT_DEFAULT_CODEPAGE=437
 CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
@@ -649,53 +1086,70 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 # Pseudo filesystems
 #
 CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
-CONFIG_DEVPTS_FS_XATTR=y
-# CONFIG_DEVPTS_FS_SECURITY is not set
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
+# CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_CONFIGFS_FS=y
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
 # CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_UBIFS_FS is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFSD is not set
+# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
 
 #
 # Partition Types
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
 # CONFIG_NLS_CODEPAGE_737 is not set
 # CONFIG_NLS_CODEPAGE_775 is not set
@@ -719,7 +1173,7 @@ CONFIG_NLS_CODEPAGE_437=y
 # CONFIG_NLS_ISO8859_8 is not set
 # CONFIG_NLS_CODEPAGE_1250 is not set
 # CONFIG_NLS_CODEPAGE_1251 is not set
-CONFIG_NLS_ASCII=y
+# CONFIG_NLS_ASCII is not set
 # CONFIG_NLS_ISO8859_1 is not set
 # CONFIG_NLS_ISO8859_2 is not set
 # CONFIG_NLS_ISO8859_3 is not set
@@ -733,47 +1187,119 @@ CONFIG_NLS_ASCII=y
 # CONFIG_NLS_ISO8859_15 is not set
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
+CONFIG_NLS_UTF8=y
+# CONFIG_DLM is not set
 
 #
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_MAGIC_SYSRQ is not set
-CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+# CONFIG_SCHED_DEBUG is not set
 # CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
 
 #
 # Security options
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
 # CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
+CONFIG_AUDIT_GENERIC=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig
index 2d58b8fe59be..b49810461e41 100644
--- a/arch/arm/configs/s3c2410_defconfig
+++ b/arch/arm/configs/s3c2410_defconfig
@@ -260,6 +260,7 @@ CONFIG_MACH_NEXCODER_2440=y
 CONFIG_SMDK2440_CPU2440=y
 CONFIG_MACH_AT2440EVB=y
 CONFIG_CPU_S3C2442=y
+CONFIG_MACH_MINI2440=y
 
 #
 # S3C2442 Machines
@@ -2298,7 +2299,6 @@ CONFIG_DEBUG_ERRORS=y
 # CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
 # CONFIG_DEBUG_ICEDCC is not set
-CONFIG_DEBUG_S3C_PORT=y
 CONFIG_DEBUG_S3C_UART=0
 
 #
diff --git a/arch/arm/configs/s3c6400_defconfig b/arch/arm/configs/s3c6400_defconfig
index 2e8fa50e9a09..32860609e057 100644
--- a/arch/arm/configs/s3c6400_defconfig
+++ b/arch/arm/configs/s3c6400_defconfig
@@ -816,7 +816,6 @@ CONFIG_DEBUG_ERRORS=y
 # CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
 # CONFIG_DEBUG_ICEDCC is not set
-CONFIG_DEBUG_S3C_PORT=y
 CONFIG_DEBUG_S3C_UART=0
 
 #
diff --git a/arch/arm/configs/tct_hammer_defconfig b/arch/arm/configs/tct_hammer_defconfig
index 07dfb98df4f0..9d32faef05f6 100644
--- a/arch/arm/configs/tct_hammer_defconfig
+++ b/arch/arm/configs/tct_hammer_defconfig
@@ -857,7 +857,6 @@ CONFIG_DEBUG_ERRORS=y
 # CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
 # CONFIG_DEBUG_ICEDCC is not set
-# CONFIG_DEBUG_S3C_PORT is not set
 CONFIG_DEBUG_S3C_UART=0
 
 #
diff --git a/arch/arm/configs/u300_defconfig b/arch/arm/configs/u300_defconfig
index 2d827e121147..4762d9001298 100644
--- a/arch/arm/configs/u300_defconfig
+++ b/arch/arm/configs/u300_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc6
-# Mon Jun  1 09:18:22 2009
+# Linux kernel version: 2.6.31-rc1
+# Thu Jul  2 00:16:59 2009
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -9,7 +9,7 @@ CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
+CONFIG_HAVE_TCM=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -18,13 +18,12 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_HARDIRQS_SW_RESEND=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -68,7 +67,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -81,8 +79,13 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 # CONFIG_AIO is not set
+
+#
+# Performance Counters
+#
 # CONFIG_VM_EVENT_COUNTERS is not set
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -94,6 +97,10 @@ CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -106,7 +113,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -138,9 +145,9 @@ CONFIG_DEFAULT_IOSCHED="deadline"
 # CONFIG_ARCH_EP93XX is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
 # CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
 # CONFIG_ARCH_IOP13XX is not set
 # CONFIG_ARCH_IOP32X is not set
 # CONFIG_ARCH_IOP33X is not set
@@ -216,8 +223,8 @@ CONFIG_ARM_THUMB=y
 # CONFIG_CPU_DCACHE_DISABLE is not set
 # CONFIG_CPU_DCACHE_WRITETHROUGH is not set
 # CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
 CONFIG_ARM_VIC=y
+CONFIG_ARM_VIC_NR=2
 CONFIG_COMMON_CLKDEV=y
 
 #
@@ -243,7 +250,6 @@ CONFIG_PREEMPT=y
 CONFIG_HZ=100
 CONFIG_AEABI=y
 CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
 # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
 # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
 # CONFIG_HIGHMEM is not set
@@ -258,17 +264,18 @@ CONFIG_SPLIT_PTLOCK_CPUS=4096
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
 
 #
 # Boot options
 #
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/mtdblock2 rw rootfstype=yaffs2 console=ttyAMA0,115200n8 ab3100.force=0,0x48 mtdparts=u300nand:128k@0x0(bootrecords)ro,8064k@128k(free)ro,253952k@8192k(platform) lpj=515072"
+CONFIG_CMDLINE="root=/dev/ram0 rw rootfstype=rootfs console=ttyAMA0,115200n8 lpj=515072"
 # CONFIG_XIP_KERNEL is not set
 # CONFIG_KEXEC is not set
 
@@ -359,6 +366,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -497,6 +505,7 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_AT25 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
@@ -538,6 +547,7 @@ CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_LM8323 is not set
 # CONFIG_KEYBOARD_GPIO is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
@@ -597,9 +607,11 @@ CONFIG_I2C_HELPER_AUTO=y
 #
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
+# CONFIG_I2C_DESIGNWARE is not set
 # CONFIG_I2C_GPIO is not set
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SIMTEC is not set
+CONFIG_I2C_STU300=y
 
 #
 # External I2C/SMBus adapter drivers
@@ -620,7 +632,6 @@ CONFIG_I2C_HELPER_AUTO=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -635,6 +646,7 @@ CONFIG_SPI_MASTER=y
 #
 # CONFIG_SPI_BITBANG is not set
 # CONFIG_SPI_GPIO is not set
+CONFIG_SPI_PL022=y
 
 #
 # SPI Protocol Masters
@@ -647,6 +659,7 @@ CONFIG_POWER_SUPPLY=y
 # CONFIG_PDA_POWER is not set
 # CONFIG_BATTERY_DS2760 is not set
 # CONFIG_BATTERY_BQ27x00 is not set
+# CONFIG_BATTERY_MAX17040 is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
@@ -657,6 +670,7 @@ CONFIG_WATCHDOG=y
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
+CONFIG_COH901327_WATCHDOG=y
 CONFIG_SSB_POSSIBLE=y
 
 #
@@ -678,22 +692,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+CONFIG_AB3100_CORE=y
+# CONFIG_EZX_PCAP is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -760,6 +761,11 @@ CONFIG_SND_JACK=y
 # CONFIG_SND_VERBOSE_PROCFS is not set
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
 # CONFIG_SND_DRIVERS is not set
 # CONFIG_SND_ARM is not set
 # CONFIG_SND_SPI is not set
@@ -770,7 +776,7 @@ CONFIG_SND_SOC_I2C_AND_SPI=y
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
+CONFIG_MMC_DEBUG=y
 # CONFIG_MMC_UNSAFE_RESUME is not set
 
 #
@@ -797,7 +803,7 @@ CONFIG_LEDS_CLASS=y
 #
 # CONFIG_LEDS_PCA9532 is not set
 # CONFIG_LEDS_GPIO is not set
-# CONFIG_LEDS_LP5521 is not set
+# CONFIG_LEDS_LP3944 is not set
 # CONFIG_LEDS_PCA955X is not set
 # CONFIG_LEDS_DAC124S085 is not set
 # CONFIG_LEDS_BD2802 is not set
@@ -845,6 +851,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -887,7 +894,10 @@ CONFIG_REGULATOR=y
 # CONFIG_REGULATOR_DEBUG is not set
 # CONFIG_REGULATOR_FIXED_VOLTAGE is not set
 # CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
 # CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+# CONFIG_REGULATOR_LP3971 is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -900,16 +910,20 @@ CONFIG_REGULATOR=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 CONFIG_FUSE_FS=y
+# CONFIG_CUSE is not set
 
 #
 # Caches
@@ -1033,6 +1047,7 @@ CONFIG_TIMER_STATS=y
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_PREEMPT is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
@@ -1063,18 +1078,16 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_PAGE_POISONING is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_PREEMPT_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
@@ -1109,6 +1122,7 @@ CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC32 is not set
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
+CONFIG_GENERIC_ALLOCATOR=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
diff --git a/arch/arm/include/asm/ftrace.h b/arch/arm/include/asm/ftrace.h
index 39c8bc1a006a..d74265cffd86 100644
--- a/arch/arm/include/asm/ftrace.h
+++ b/arch/arm/include/asm/ftrace.h
@@ -11,4 +11,38 @@ extern void mcount(void);
 
 #endif
 
+#ifndef __ASSEMBLY__
+
+#if defined(CONFIG_FRAME_POINTER) && !defined(CONFIG_ARM_UNWIND)
+/*
+ * return_address uses walk_stackframe to do it's work.  If both
+ * CONFIG_FRAME_POINTER=y and CONFIG_ARM_UNWIND=y walk_stackframe uses unwind
+ * information.  For this to work in the function tracer many functions would
+ * have to be marked with __notrace.  So for now just depend on
+ * !CONFIG_ARM_UNWIND.
+ */
+
+void *return_address(unsigned int);
+
+#else
+
+extern inline void *return_address(unsigned int level)
+{
+	return NULL;
+}
+
+#endif
+
+#define HAVE_ARCH_CALLER_ADDR
+
+#define CALLER_ADDR0 ((unsigned long)__builtin_return_address(0))
+#define CALLER_ADDR1 ((unsigned long)return_address(1))
+#define CALLER_ADDR2 ((unsigned long)return_address(2))
+#define CALLER_ADDR3 ((unsigned long)return_address(3))
+#define CALLER_ADDR4 ((unsigned long)return_address(4))
+#define CALLER_ADDR5 ((unsigned long)return_address(5))
+#define CALLER_ADDR6 ((unsigned long)return_address(6))
+
+#endif /* ifndef __ASSEMBLY__ */
+
 #endif /* _ASM_ARM_FTRACE */
diff --git a/arch/arm/include/asm/mach/mmc.h b/arch/arm/include/asm/mach/mmc.h
index 4da332b03144..b490ecc79def 100644
--- a/arch/arm/include/asm/mach/mmc.h
+++ b/arch/arm/include/asm/mach/mmc.h
@@ -10,6 +10,8 @@ struct mmc_platform_data {
 	unsigned int ocr_mask;			/* available voltages */
 	u32 (*translate_vdd)(struct device *, unsigned int);
 	unsigned int (*status)(struct device *);
+	int	gpio_wp;
+	int	gpio_cd;
 };
 
 #endif
diff --git a/arch/arm/include/asm/page.h b/arch/arm/include/asm/page.h
index be962c1349c4..9c746af1bf6e 100644
--- a/arch/arm/include/asm/page.h
+++ b/arch/arm/include/asm/page.h
@@ -12,7 +12,7 @@
 
 /* PAGE_SHIFT determines the page size */
 #define PAGE_SHIFT		12
-#define PAGE_SIZE		(1UL << PAGE_SHIFT)
+#define PAGE_SIZE		(_AC(1,UL) << PAGE_SHIFT)
 #define PAGE_MASK		(~(PAGE_SIZE-1))
 
 #ifndef __ASSEMBLY__
diff --git a/arch/arm/include/asm/pgalloc.h b/arch/arm/include/asm/pgalloc.h
index 3dcd64bf1824..b12cc98bbe04 100644
--- a/arch/arm/include/asm/pgalloc.h
+++ b/arch/arm/include/asm/pgalloc.h
@@ -36,6 +36,8 @@ extern void free_pgd_slow(struct mm_struct *mm, pgd_t *pgd);
 #define pgd_alloc(mm)			get_pgd_slow(mm)
 #define pgd_free(mm, pgd)		free_pgd_slow(mm, pgd)
 
+#define PGALLOC_GFP	(GFP_KERNEL | __GFP_NOTRACK | __GFP_REPEAT | __GFP_ZERO)
+
 /*
  * Allocate one PTE table.
  *
@@ -57,7 +59,7 @@ pte_alloc_one_kernel(struct mm_struct *mm, unsigned long addr)
 {
 	pte_t *pte;
 
-	pte = (pte_t *)__get_free_page(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO);
+	pte = (pte_t *)__get_free_page(PGALLOC_GFP);
 	if (pte) {
 		clean_dcache_area(pte, sizeof(pte_t) * PTRS_PER_PTE);
 		pte += PTRS_PER_PTE;
@@ -71,10 +73,16 @@ pte_alloc_one(struct mm_struct *mm, unsigned long addr)
 {
 	struct page *pte;
 
-	pte = alloc_pages(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO, 0);
+#ifdef CONFIG_HIGHPTE
+	pte = alloc_pages(PGALLOC_GFP | __GFP_HIGHMEM, 0);
+#else
+	pte = alloc_pages(PGALLOC_GFP, 0);
+#endif
 	if (pte) {
-		void *page = page_address(pte);
-		clean_dcache_area(page, sizeof(pte_t) * PTRS_PER_PTE);
+		if (!PageHighMem(pte)) {
+			void *page = page_address(pte);
+			clean_dcache_area(page, sizeof(pte_t) * PTRS_PER_PTE);
+		}
 		pgtable_page_ctor(pte);
 	}
 
diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h
index 1cd2d6416bda..201ccaa11f61 100644
--- a/arch/arm/include/asm/pgtable.h
+++ b/arch/arm/include/asm/pgtable.h
@@ -162,10 +162,8 @@ extern void __pgd_error(const char *file, int line, unsigned long val);
  * entries are stored 1024 bytes below.
  */
 #define L_PTE_PRESENT		(1 << 0)
-#define L_PTE_FILE		(1 << 1)	/* only when !PRESENT */
 #define L_PTE_YOUNG		(1 << 1)
-#define L_PTE_BUFFERABLE	(1 << 2)	/* obsolete, matches PTE */
-#define L_PTE_CACHEABLE		(1 << 3)	/* obsolete, matches PTE */
+#define L_PTE_FILE		(1 << 2)	/* only when !PRESENT */
 #define L_PTE_DIRTY		(1 << 6)
 #define L_PTE_WRITE		(1 << 7)
 #define L_PTE_USER		(1 << 8)
@@ -264,10 +262,19 @@ extern struct page *empty_zero_page;
 #define pte_clear(mm,addr,ptep)	set_pte_ext(ptep, __pte(0), 0)
 #define pte_page(pte)		(pfn_to_page(pte_pfn(pte)))
 #define pte_offset_kernel(dir,addr)	(pmd_page_vaddr(*(dir)) + __pte_index(addr))
-#define pte_offset_map(dir,addr)	(pmd_page_vaddr(*(dir)) + __pte_index(addr))
-#define pte_offset_map_nested(dir,addr)	(pmd_page_vaddr(*(dir)) + __pte_index(addr))
-#define pte_unmap(pte)		do { } while (0)
-#define pte_unmap_nested(pte)	do { } while (0)
+
+#define pte_offset_map(dir,addr)	(__pte_map(dir, KM_PTE0) + __pte_index(addr))
+#define pte_offset_map_nested(dir,addr)	(__pte_map(dir, KM_PTE1) + __pte_index(addr))
+#define pte_unmap(pte)			__pte_unmap(pte, KM_PTE0)
+#define pte_unmap_nested(pte)		__pte_unmap(pte, KM_PTE1)
+
+#ifndef CONFIG_HIGHPTE
+#define __pte_map(dir,km)	pmd_page_vaddr(*(dir))
+#define __pte_unmap(pte,km)	do { } while (0)
+#else
+#define __pte_map(dir,km)	((pte_t *)kmap_atomic(pmd_page(*(dir)), km) + PTRS_PER_PTE)
+#define __pte_unmap(pte,km)	kunmap_atomic((pte - PTRS_PER_PTE), km)
+#endif
 
 #define set_pte_ext(ptep,pte,ext) cpu_set_pte_ext(ptep,pte,ext)
 
@@ -285,15 +292,6 @@ extern struct page *empty_zero_page;
 #define pte_young(pte)		(pte_val(pte) & L_PTE_YOUNG)
 #define pte_special(pte)	(0)
 
-/*
- * The following only works if pte_present() is not true.
- */
-#define pte_file(pte)		(pte_val(pte) & L_PTE_FILE)
-#define pte_to_pgoff(x)		(pte_val(x) >> 2)
-#define pgoff_to_pte(x)		__pte(((x) << 2) | L_PTE_FILE)
-
-#define PTE_FILE_MAX_BITS	30
-
 #define PTE_BIT_FUNC(fn,op) \
 static inline pte_t pte_##fn(pte_t pte) { pte_val(pte) op; return pte; }
 
@@ -384,16 +382,50 @@ static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
 
 extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
 
-/* Encode and decode a swap entry.
+/*
+ * Encode and decode a swap entry.  Swap entries are stored in the Linux
+ * page tables as follows:
+ *
+ *   3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
+ *   1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
+ *   <--------------- offset --------------------> <- type --> 0 0 0
  *
- * We support up to 32GB of swap on 4k machines
+ * This gives us up to 63 swap files and 32GB per swap file.  Note that
+ * the offset field is always non-zero.
  */
-#define __swp_type(x)		(((x).val >> 2) & 0x7f)
-#define __swp_offset(x)		((x).val >> 9)
-#define __swp_entry(type,offset) ((swp_entry_t) { ((type) << 2) | ((offset) << 9) })
+#define __SWP_TYPE_SHIFT	3
+#define __SWP_TYPE_BITS		6
+#define __SWP_TYPE_MASK		((1 << __SWP_TYPE_BITS) - 1)
+#define __SWP_OFFSET_SHIFT	(__SWP_TYPE_BITS + __SWP_TYPE_SHIFT)
+
+#define __swp_type(x)		(((x).val >> __SWP_TYPE_SHIFT) & __SWP_TYPE_MASK)
+#define __swp_offset(x)		((x).val >> __SWP_OFFSET_SHIFT)
+#define __swp_entry(type,offset) ((swp_entry_t) { ((type) << __SWP_TYPE_SHIFT) | ((offset) << __SWP_OFFSET_SHIFT) })
+
 #define __pte_to_swp_entry(pte)	((swp_entry_t) { pte_val(pte) })
 #define __swp_entry_to_pte(swp)	((pte_t) { (swp).val })
 
+/*
+ * It is an error for the kernel to have more swap files than we can
+ * encode in the PTEs.  This ensures that we know when MAX_SWAPFILES
+ * is increased beyond what we presently support.
+ */
+#define MAX_SWAPFILES_CHECK() BUILD_BUG_ON(MAX_SWAPFILES_SHIFT > __SWP_TYPE_BITS)
+
+/*
+ * Encode and decode a file entry.  File entries are stored in the Linux
+ * page tables as follows:
+ *
+ *   3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
+ *   1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
+ *   <----------------------- offset ------------------------> 1 0 0
+ */
+#define pte_file(pte)		(pte_val(pte) & L_PTE_FILE)
+#define pte_to_pgoff(x)		(pte_val(x) >> 3)
+#define pgoff_to_pte(x)		__pte(((x) << 3) | L_PTE_FILE)
+
+#define PTE_FILE_MAX_BITS	29
+
 /* Needs to be defined here and not in linux/mm.h, as it is arch dependent */
 /* FIXME: this is not correct */
 #define kern_addr_valid(addr)	(1)
diff --git a/arch/arm/include/asm/thread_info.h b/arch/arm/include/asm/thread_info.h
index 4f8848260ee2..e20d80539b42 100644
--- a/arch/arm/include/asm/thread_info.h
+++ b/arch/arm/include/asm/thread_info.h
@@ -73,7 +73,7 @@ struct thread_info {
 	.task		= &tsk,						\
 	.exec_domain	= &default_exec_domain,				\
 	.flags		= 0,						\
-	.preempt_count	= 1,						\
+	.preempt_count	= INIT_PREEMPT_COUNT,				\
 	.addr_limit	= KERNEL_DS,					\
 	.cpu_domain	= domain_val(DOMAIN_USER, DOMAIN_MANAGER) |	\
 			  domain_val(DOMAIN_KERNEL, DOMAIN_MANAGER) |	\
@@ -140,6 +140,7 @@ extern void vfp_sync_state(struct thread_info *thread);
 #define TIF_USING_IWMMXT	17
 #define TIF_MEMDIE		18
 #define TIF_FREEZE		19
+#define TIF_RESTORE_SIGMASK	20
 
 #define _TIF_SIGPENDING		(1 << TIF_SIGPENDING)
 #define _TIF_NEED_RESCHED	(1 << TIF_NEED_RESCHED)
@@ -147,6 +148,7 @@ extern void vfp_sync_state(struct thread_info *thread);
 #define _TIF_POLLING_NRFLAG	(1 << TIF_POLLING_NRFLAG)
 #define _TIF_USING_IWMMXT	(1 << TIF_USING_IWMMXT)
 #define _TIF_FREEZE		(1 << TIF_FREEZE)
+#define _TIF_RESTORE_SIGMASK	(1 << TIF_RESTORE_SIGMASK)
 
 /*
  * Change these and you break ASM code in entry-common.S
diff --git a/arch/arm/include/asm/unistd.h b/arch/arm/include/asm/unistd.h
index 0e97b8cb77d5..9122c9ee18fb 100644
--- a/arch/arm/include/asm/unistd.h
+++ b/arch/arm/include/asm/unistd.h
@@ -360,8 +360,8 @@
 #define __NR_readlinkat			(__NR_SYSCALL_BASE+332)
 #define __NR_fchmodat			(__NR_SYSCALL_BASE+333)
 #define __NR_faccessat			(__NR_SYSCALL_BASE+334)
-					/* 335 for pselect6 */
-					/* 336 for ppoll */
+#define __NR_pselect6			(__NR_SYSCALL_BASE+335)
+#define __NR_ppoll			(__NR_SYSCALL_BASE+336)
 #define __NR_unshare			(__NR_SYSCALL_BASE+337)
 #define __NR_set_robust_list		(__NR_SYSCALL_BASE+338)
 #define __NR_get_robust_list		(__NR_SYSCALL_BASE+339)
@@ -372,7 +372,7 @@
 #define __NR_vmsplice			(__NR_SYSCALL_BASE+343)
 #define __NR_move_pages			(__NR_SYSCALL_BASE+344)
 #define __NR_getcpu			(__NR_SYSCALL_BASE+345)
-					/* 346 for epoll_pwait */
+#define __NR_epoll_pwait		(__NR_SYSCALL_BASE+346)
 #define __NR_kexec_load			(__NR_SYSCALL_BASE+347)
 #define __NR_utimensat			(__NR_SYSCALL_BASE+348)
 #define __NR_signalfd			(__NR_SYSCALL_BASE+349)
@@ -432,6 +432,7 @@
 #define __ARCH_WANT_SYS_SIGPENDING
 #define __ARCH_WANT_SYS_SIGPROCMASK
 #define __ARCH_WANT_SYS_RT_SIGACTION
+#define __ARCH_WANT_SYS_RT_SIGSUSPEND
 
 #if !defined(CONFIG_AEABI) || defined(CONFIG_OABI_COMPAT)
 #define __ARCH_WANT_SYS_TIME
diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index ff89d0b3abc5..3213c9382b17 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -8,10 +8,12 @@ ifdef CONFIG_DYNAMIC_FTRACE
 CFLAGS_REMOVE_ftrace.o = -pg
 endif
 
+CFLAGS_REMOVE_return_address.o = -pg
+
 # Object file lists.
 
 obj-y		:= compat.o elf.o entry-armv.o entry-common.o irq.o \
-		   process.o ptrace.o setup.o signal.o \
+		   process.o ptrace.o return_address.o setup.o signal.o \
 		   sys_arm.o stacktrace.o time.o traps.o
 
 obj-$(CONFIG_ISA_DMA_API)	+= dma.o
diff --git a/arch/arm/kernel/calls.S b/arch/arm/kernel/calls.S
index f776e72a4cb8..ecfa98954d1d 100644
--- a/arch/arm/kernel/calls.S
+++ b/arch/arm/kernel/calls.S
@@ -81,7 +81,7 @@
 		CALL(sys_ni_syscall)		/* was sys_ssetmask */
 /* 70 */	CALL(sys_setreuid16)
 		CALL(sys_setregid16)
-		CALL(sys_sigsuspend_wrapper)
+		CALL(sys_sigsuspend)
 		CALL(sys_sigpending)
 		CALL(sys_sethostname)
 /* 75 */	CALL(sys_setrlimit)
@@ -188,7 +188,7 @@
 		CALL(sys_rt_sigpending)
 		CALL(sys_rt_sigtimedwait)
 		CALL(sys_rt_sigqueueinfo)
-		CALL(sys_rt_sigsuspend_wrapper)
+		CALL(sys_rt_sigsuspend)
 /* 180 */	CALL(ABI(sys_pread64, sys_oabi_pread64))
 		CALL(ABI(sys_pwrite64, sys_oabi_pwrite64))
 		CALL(sys_chown16)
@@ -344,8 +344,8 @@
 		CALL(sys_readlinkat)
 		CALL(sys_fchmodat)
 		CALL(sys_faccessat)
-/* 335 */	CALL(sys_ni_syscall)		/* eventually pselect6 */
-		CALL(sys_ni_syscall)		/* eventually ppoll */
+/* 335 */	CALL(sys_pselect6)
+		CALL(sys_ppoll)
 		CALL(sys_unshare)
 		CALL(sys_set_robust_list)
 		CALL(sys_get_robust_list)
@@ -355,7 +355,7 @@
 		CALL(sys_vmsplice)
 		CALL(sys_move_pages)
 /* 345 */	CALL(sys_getcpu)
-		CALL(sys_ni_syscall)		/* eventually epoll_pwait */
+		CALL(sys_epoll_pwait)
 		CALL(sys_kexec_load)
 		CALL(sys_utimensat)
 		CALL(sys_signalfd)
diff --git a/arch/arm/kernel/crunch.c b/arch/arm/kernel/crunch.c
index 99995c2b2312..769abe15cf91 100644
--- a/arch/arm/kernel/crunch.c
+++ b/arch/arm/kernel/crunch.c
@@ -31,7 +31,7 @@ void crunch_task_release(struct thread_info *thread)
 
 static int crunch_enabled(u32 devcfg)
 {
-	return !!(devcfg & EP93XX_SYSCON_DEVICE_CONFIG_CRUNCH_ENABLE);
+	return !!(devcfg & EP93XX_SYSCON_DEVCFG_CPENA);
 }
 
 static int crunch_do(struct notifier_block *self, unsigned long cmd, void *t)
@@ -56,11 +56,16 @@ static int crunch_do(struct notifier_block *self, unsigned long cmd, void *t)
 		break;
 
 	case THREAD_NOTIFY_SWITCH:
-		devcfg = __raw_readl(EP93XX_SYSCON_DEVICE_CONFIG);
+		devcfg = __raw_readl(EP93XX_SYSCON_DEVCFG);
 		if (crunch_enabled(devcfg) || crunch_owner == crunch_state) {
-			devcfg ^= EP93XX_SYSCON_DEVICE_CONFIG_CRUNCH_ENABLE;
+			/*
+			 * We don't use ep93xx_syscon_swlocked_write() here
+			 * because we are on the context switch path and
+			 * preemption is already disabled.
+			 */
+			devcfg ^= EP93XX_SYSCON_DEVCFG_CPENA;
 			__raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
-			__raw_writel(devcfg, EP93XX_SYSCON_DEVICE_CONFIG);
+			__raw_writel(devcfg, EP93XX_SYSCON_DEVCFG);
 		}
 		break;
 	}
diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S
index 366e5097a41a..bfa7f0af7ede 100644
--- a/arch/arm/kernel/entry-common.S
+++ b/arch/arm/kernel/entry-common.S
@@ -373,16 +373,6 @@ sys_clone_wrapper:
 		b	sys_clone
 ENDPROC(sys_clone_wrapper)
 
-sys_sigsuspend_wrapper:
-		add	r3, sp, #S_OFF
-		b	sys_sigsuspend
-ENDPROC(sys_sigsuspend_wrapper)
-
-sys_rt_sigsuspend_wrapper:
-		add	r2, sp, #S_OFF
-		b	sys_rt_sigsuspend
-ENDPROC(sys_rt_sigsuspend_wrapper)
-
 sys_sigreturn_wrapper:
 		add	r0, sp, #S_OFF
 		b	sys_sigreturn
diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c
index 096f600dc8d8..b7c3490eaa24 100644
--- a/arch/arm/kernel/irq.c
+++ b/arch/arm/kernel/irq.c
@@ -98,17 +98,6 @@ unlock:
 	return 0;
 }
 
-/* Handle bad interrupts */
-static struct irq_desc bad_irq_desc = {
-	.handle_irq = handle_bad_irq,
-	.lock = __SPIN_LOCK_UNLOCKED(bad_irq_desc.lock),
-};
-
-#ifdef CONFIG_CPUMASK_OFFSTACK
-/* We are not allocating bad_irq_desc.affinity or .pending_mask */
-#error "ARM architecture does not support CONFIG_CPUMASK_OFFSTACK."
-#endif
-
 /*
  * do_IRQ handles all hardware IRQ's.  Decoded IRQs should not
  * come via this function.  Instead, they should provide their
@@ -124,10 +113,13 @@ asmlinkage void __exception asm_do_IRQ(unsigned int irq, struct pt_regs *regs)
 	 * Some hardware gives randomly wrong interrupts.  Rather
 	 * than crashing, do something sensible.
 	 */
-	if (irq >= NR_IRQS)
-		handle_bad_irq(irq, &bad_irq_desc);
-	else
+	if (unlikely(irq >= NR_IRQS)) {
+		if (printk_ratelimit())
+			printk(KERN_WARNING "Bad IRQ%u\n", irq);
+		ack_bad_irq(irq);
+	} else {
 		generic_handle_irq(irq);
+	}
 
 	/* AT91 specific workaround */
 	irq_finish(irq);
@@ -165,10 +157,6 @@ void __init init_IRQ(void)
 	for (irq = 0; irq < NR_IRQS; irq++)
 		irq_desc[irq].status |= IRQ_NOREQUEST | IRQ_NOPROBE;
 
-#ifdef CONFIG_SMP
-	cpumask_setall(bad_irq_desc.affinity);
-	bad_irq_desc.node = smp_processor_id();
-#endif
 	init_arch_irq();
 }
 
diff --git a/arch/arm/kernel/return_address.c b/arch/arm/kernel/return_address.c
new file mode 100644
index 000000000000..df246da4ceca
--- /dev/null
+++ b/arch/arm/kernel/return_address.c
@@ -0,0 +1,71 @@
+/*
+ * arch/arm/kernel/return_address.c
+ *
+ * Copyright (C) 2009 Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ * for Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#include <linux/module.h>
+
+#if defined(CONFIG_FRAME_POINTER) && !defined(CONFIG_ARM_UNWIND)
+#include <linux/sched.h>
+
+#include <asm/stacktrace.h>
+
+struct return_address_data {
+	unsigned int level;
+	void *addr;
+};
+
+static int save_return_addr(struct stackframe *frame, void *d)
+{
+	struct return_address_data *data = d;
+
+	if (!data->level) {
+		data->addr = (void *)frame->lr;
+
+		return 1;
+	} else {
+		--data->level;
+		return 0;
+	}
+}
+
+void *return_address(unsigned int level)
+{
+	struct return_address_data data;
+	struct stackframe frame;
+	register unsigned long current_sp asm ("sp");
+
+	data.level = level + 1;
+
+	frame.fp = (unsigned long)__builtin_frame_address(0);
+	frame.sp = current_sp;
+	frame.lr = (unsigned long)__builtin_return_address(0);
+	frame.pc = (unsigned long)return_address;
+
+	walk_stackframe(&frame, save_return_addr, &data);
+
+	if (!data.level)
+		return data.addr;
+	else
+		return NULL;
+}
+
+#else /* if defined(CONFIG_FRAME_POINTER) && !defined(CONFIG_ARM_UNWIND) */
+
+#if defined(CONFIG_ARM_UNWIND)
+#warning "TODO: return_address should use unwind tables"
+#endif
+
+void *return_address(unsigned int level)
+{
+	return NULL;
+}
+
+#endif /* if defined(CONFIG_FRAME_POINTER) && !defined(CONFIG_ARM_UNWIND) / else */
+
+EXPORT_SYMBOL_GPL(return_address);
diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c
index 93bb4247b7ed..e27ee1f701d5 100644
--- a/arch/arm/kernel/signal.c
+++ b/arch/arm/kernel/signal.c
@@ -47,57 +47,22 @@ const unsigned long sigreturn_codes[7] = {
 	MOV_R7_NR_RT_SIGRETURN, SWI_SYS_RT_SIGRETURN, SWI_THUMB_RT_SIGRETURN,
 };
 
-static int do_signal(sigset_t *oldset, struct pt_regs * regs, int syscall);
-
 /*
  * atomically swap in the new signal mask, and wait for a signal.
  */
-asmlinkage int sys_sigsuspend(int restart, unsigned long oldmask, old_sigset_t mask, struct pt_regs *regs)
+asmlinkage int sys_sigsuspend(int restart, unsigned long oldmask, old_sigset_t mask)
 {
-	sigset_t saveset;
-
 	mask &= _BLOCKABLE;
 	spin_lock_irq(&current->sighand->siglock);
-	saveset = current->blocked;
+	current->saved_sigmask = current->blocked;
 	siginitset(&current->blocked, mask);
 	recalc_sigpending();
 	spin_unlock_irq(&current->sighand->siglock);
-	regs->ARM_r0 = -EINTR;
-
-	while (1) {
-		current->state = TASK_INTERRUPTIBLE;
-		schedule();
-		if (do_signal(&saveset, regs, 0))
-			return regs->ARM_r0;
-	}
-}
-
-asmlinkage int
-sys_rt_sigsuspend(sigset_t __user *unewset, size_t sigsetsize, struct pt_regs *regs)
-{
-	sigset_t saveset, newset;
-
-	/* XXX: Don't preclude handling different sized sigset_t's. */
-	if (sigsetsize != sizeof(sigset_t))
-		return -EINVAL;
-
-	if (copy_from_user(&newset, unewset, sizeof(newset)))
-		return -EFAULT;
-	sigdelsetmask(&newset, ~_BLOCKABLE);
-
-	spin_lock_irq(&current->sighand->siglock);
-	saveset = current->blocked;
-	current->blocked = newset;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
-	regs->ARM_r0 = -EINTR;
 
-	while (1) {
-		current->state = TASK_INTERRUPTIBLE;
-		schedule();
-		if (do_signal(&saveset, regs, 0))
-			return regs->ARM_r0;
-	}
+	current->state = TASK_INTERRUPTIBLE;
+	schedule();
+	set_restore_sigmask();
+	return -ERESTARTNOHAND;
 }
 
 asmlinkage int 
@@ -545,7 +510,7 @@ static inline void setup_syscall_restart(struct pt_regs *regs)
 /*
  * OK, we're invoking a handler
  */	
-static void
+static int
 handle_signal(unsigned long sig, struct k_sigaction *ka,
 	      siginfo_t *info, sigset_t *oldset,
 	      struct pt_regs * regs, int syscall)
@@ -596,7 +561,7 @@ handle_signal(unsigned long sig, struct k_sigaction *ka,
 
 	if (ret != 0) {
 		force_sigsegv(sig, tsk);
-		return;
+		return ret;
 	}
 
 	/*
@@ -610,6 +575,7 @@ handle_signal(unsigned long sig, struct k_sigaction *ka,
 	recalc_sigpending();
 	spin_unlock_irq(&tsk->sighand->siglock);
 
+	return 0;
 }
 
 /*
@@ -621,7 +587,7 @@ handle_signal(unsigned long sig, struct k_sigaction *ka,
  * the kernel can handle, and then we build all the user-level signal handling
  * stack-frames in one go after that.
  */
-static int do_signal(sigset_t *oldset, struct pt_regs *regs, int syscall)
+static void do_signal(struct pt_regs *regs, int syscall)
 {
 	struct k_sigaction ka;
 	siginfo_t info;
@@ -634,7 +600,7 @@ static int do_signal(sigset_t *oldset, struct pt_regs *regs, int syscall)
 	 * if so.
 	 */
 	if (!user_mode(regs))
-		return 0;
+		return;
 
 	if (try_to_freeze())
 		goto no_signal;
@@ -643,9 +609,24 @@ static int do_signal(sigset_t *oldset, struct pt_regs *regs, int syscall)
 
 	signr = get_signal_to_deliver(&info, &ka, regs, NULL);
 	if (signr > 0) {
-		handle_signal(signr, &ka, &info, oldset, regs, syscall);
+		sigset_t *oldset;
+
+		if (test_thread_flag(TIF_RESTORE_SIGMASK))
+			oldset = &current->saved_sigmask;
+		else
+			oldset = &current->blocked;
+		if (handle_signal(signr, &ka, &info, oldset, regs, syscall) == 0) {
+			/*
+			 * A signal was successfully delivered; the saved
+			 * sigmask will have been stored in the signal frame,
+			 * and will be restored by sigreturn, so we can simply
+			 * clear the TIF_RESTORE_SIGMASK flag.
+			 */
+			if (test_thread_flag(TIF_RESTORE_SIGMASK))
+				clear_thread_flag(TIF_RESTORE_SIGMASK);
+		}
 		single_step_set(current);
-		return 1;
+		return;
 	}
 
  no_signal:
@@ -697,14 +678,21 @@ static int do_signal(sigset_t *oldset, struct pt_regs *regs, int syscall)
 		    regs->ARM_r0 == -ERESTARTNOINTR) {
 			setup_syscall_restart(regs);
 		}
+
+		/* If there's no signal to deliver, we just put the saved sigmask
+		 * back.
+		 */
+		if (test_thread_flag(TIF_RESTORE_SIGMASK)) {
+			clear_thread_flag(TIF_RESTORE_SIGMASK);
+			sigprocmask(SIG_SETMASK, &current->saved_sigmask, NULL);
+		}
 	}
 	single_step_set(current);
-	return 0;
 }
 
 asmlinkage void
 do_notify_resume(struct pt_regs *regs, unsigned int thread_flags, int syscall)
 {
 	if (thread_flags & _TIF_SIGPENDING)
-		do_signal(&current->blocked, regs, syscall);
+		do_signal(regs, syscall);
 }
diff --git a/arch/arm/kernel/stacktrace.c b/arch/arm/kernel/stacktrace.c
index 9f444e5cc165..20b7411e47fd 100644
--- a/arch/arm/kernel/stacktrace.c
+++ b/arch/arm/kernel/stacktrace.c
@@ -21,7 +21,7 @@
  * Note that with framepointer enabled, even the leaf functions have the same
  * prologue and epilogue, therefore we can ignore the LR value in this case.
  */
-int unwind_frame(struct stackframe *frame)
+int notrace unwind_frame(struct stackframe *frame)
 {
 	unsigned long high, low;
 	unsigned long fp = frame->fp;
@@ -43,7 +43,7 @@ int unwind_frame(struct stackframe *frame)
 }
 #endif
 
-void walk_stackframe(struct stackframe *frame,
+void notrace walk_stackframe(struct stackframe *frame,
 		     int (*fn)(struct stackframe *, void *), void *data)
 {
 	while (1) {
diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S
index 4340bf3d2c84..69371028a202 100644
--- a/arch/arm/kernel/vmlinux.lds.S
+++ b/arch/arm/kernel/vmlinux.lds.S
@@ -6,6 +6,7 @@
 #include <asm-generic/vmlinux.lds.h>
 #include <asm/thread_info.h>
 #include <asm/memory.h>
+#include <asm/page.h>
 	
 OUTPUT_ARCH(arm)
 ENTRY(stext)
@@ -63,7 +64,7 @@ SECTIONS
 			usr/built-in.o(.init.ramfs)
 		__initramfs_end = .;
 #endif
-		. = ALIGN(4096);
+		. = ALIGN(PAGE_SIZE);
 		__per_cpu_load = .;
 		__per_cpu_start = .;
 			*(.data.percpu.page_aligned)
@@ -73,7 +74,7 @@ SECTIONS
 #ifndef CONFIG_XIP_KERNEL
 		__init_begin = _stext;
 		INIT_DATA
-		. = ALIGN(4096);
+		. = ALIGN(PAGE_SIZE);
 		__init_end = .;
 #endif
 	}
@@ -118,7 +119,7 @@ SECTIONS
 		*(.got)			/* Global offset table		*/
 	}
 
-	RODATA
+	RO_DATA(PAGE_SIZE)
 
 	_etext = .;			/* End of text and rodata section */
 
@@ -158,17 +159,17 @@ SECTIONS
 		*(.data.init_task)
 
 #ifdef CONFIG_XIP_KERNEL
-		. = ALIGN(4096);
+		. = ALIGN(PAGE_SIZE);
 		__init_begin = .;
 		INIT_DATA
-		. = ALIGN(4096);
+		. = ALIGN(PAGE_SIZE);
 		__init_end = .;
 #endif
 
-		. = ALIGN(4096);
+		. = ALIGN(PAGE_SIZE);
 		__nosave_begin = .;
 		*(.data.nosave)
-		. = ALIGN(4096);
+		. = ALIGN(PAGE_SIZE);
 		__nosave_end = .;
 
 		/*
diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c
index 4c2598700882..ca470d504ea0 100644
--- a/arch/arm/mach-at91/board-sam9g20ek.c
+++ b/arch/arm/mach-at91/board-sam9g20ek.c
@@ -24,6 +24,8 @@
 #include <linux/platform_device.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/at73c213.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
 #include <linux/clk.h>
 
 #include <mach/hardware.h>
@@ -218,6 +220,56 @@ static struct gpio_led ek_leds[] = {
 	}
 };
 
+
+/*
+ * GPIO Buttons
+ */
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+static struct gpio_keys_button ek_buttons[] = {
+	{
+		.gpio		= AT91_PIN_PA30,
+		.code		= BTN_3,
+		.desc		= "Button 3",
+		.active_low	= 1,
+		.wakeup		= 1,
+	},
+	{
+		.gpio		= AT91_PIN_PA31,
+		.code		= BTN_4,
+		.desc		= "Button 4",
+		.active_low	= 1,
+		.wakeup		= 1,
+	}
+};
+
+static struct gpio_keys_platform_data ek_button_data = {
+	.buttons	= ek_buttons,
+	.nbuttons	= ARRAY_SIZE(ek_buttons),
+};
+
+static struct platform_device ek_button_device = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.num_resources	= 0,
+	.dev		= {
+		.platform_data	= &ek_button_data,
+	}
+};
+
+static void __init ek_add_device_buttons(void)
+{
+	at91_set_gpio_input(AT91_PIN_PA30, 1);	/* btn3 */
+	at91_set_deglitch(AT91_PIN_PA30, 1);
+	at91_set_gpio_input(AT91_PIN_PA31, 1);	/* btn4 */
+	at91_set_deglitch(AT91_PIN_PA31, 1);
+
+	platform_device_register(&ek_button_device);
+}
+#else
+static void __init ek_add_device_buttons(void) {}
+#endif
+
+
 static struct i2c_board_info __initdata ek_i2c_devices[] = {
 	{
 		I2C_BOARD_INFO("24c512", 0x50),
@@ -246,6 +298,8 @@ static void __init ek_board_init(void)
 	at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices));
 	/* LEDs */
 	at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
+	/* Push Buttons */
+	ek_add_device_buttons();
 	/* PCK0 provides MCLK to the WM8731 */
 	at91_set_B_periph(AT91_PIN_PC1, 0);
 	/* SSC (for WM8731) */
diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c
index 9120d5d3a6fc..9d07679efce7 100644
--- a/arch/arm/mach-at91/board-sam9rlek.c
+++ b/arch/arm/mach-at91/board-sam9rlek.c
@@ -188,19 +188,21 @@ static struct fb_monspecs at91fb_default_monspecs = {
 static void at91_lcdc_power_control(int on)
 {
 	if (on)
-		at91_set_gpio_value(AT91_PIN_PA30, 0);	/* power up */
+		at91_set_gpio_value(AT91_PIN_PC1, 0);	/* power up */
 	else
-		at91_set_gpio_value(AT91_PIN_PA30, 1);	/* power down */
+		at91_set_gpio_value(AT91_PIN_PC1, 1);	/* power down */
 }
 
 /* Driver datas */
 static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
+	.lcdcon_is_backlight            = true,
 	.default_bpp			= 16,
 	.default_dmacon			= ATMEL_LCDC_DMAEN,
 	.default_lcdcon2		= AT91SAM9RL_DEFAULT_LCDCON2,
 	.default_monspecs		= &at91fb_default_monspecs,
 	.atmel_lcdfb_power_control	= at91_lcdc_power_control,
 	.guard_time			= 1,
+	.lcd_wiring_mode		= ATMEL_LCDC_WIRING_RGB,
 };
 
 #else
diff --git a/arch/arm/mach-bcmring/Kconfig b/arch/arm/mach-bcmring/Kconfig
new file mode 100644
index 000000000000..457b4384913e
--- /dev/null
+++ b/arch/arm/mach-bcmring/Kconfig
@@ -0,0 +1,21 @@
+choice
+	prompt "Processor selection in BCMRING family of devices"
+	depends on ARCH_BCMRING
+	default ARCH_BCM11107
+
+config ARCH_FPGA11107
+	bool "FPGA11107"
+
+config ARCH_BCM11107
+	bool "BCM11107"
+endchoice
+
+menu "BCMRING Options"
+	depends on ARCH_BCMRING
+
+config BCM_ZRELADDR
+	hex "Compressed ZREL ADDR"
+
+endmenu
+
+# source "drivers/char/bcmring/Kconfig"
diff --git a/arch/arm/mach-bcmring/Makefile b/arch/arm/mach-bcmring/Makefile
new file mode 100644
index 000000000000..f8d9fcedf917
--- /dev/null
+++ b/arch/arm/mach-bcmring/Makefile
@@ -0,0 +1,8 @@
+#
+# Makefile for the linux kernel.
+#
+
+# Object file lists.
+
+obj-y := arch.o mm.o irq.o clock.o core.o timer.o dma.o
+obj-y += csp/
diff --git a/arch/arm/mach-bcmring/Makefile.boot b/arch/arm/mach-bcmring/Makefile.boot
new file mode 100644
index 000000000000..fb53b283bebb
--- /dev/null
+++ b/arch/arm/mach-bcmring/Makefile.boot
@@ -0,0 +1,6 @@
+# Address where decompressor will be written and eventually executed.
+#
+# default to SDRAM
+zreladdr-y      := $(CONFIG_BCM_ZRELADDR)
+params_phys-y   := 0x00000800
+
diff --git a/arch/arm/mach-bcmring/arch.c b/arch/arm/mach-bcmring/arch.c
new file mode 100644
index 000000000000..0da693b0f7e1
--- /dev/null
+++ b/arch/arm/mach-bcmring/arch.c
@@ -0,0 +1,157 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/types.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/spinlock.h>
+#include <linux/module.h>
+
+#include <linux/proc_fs.h>
+#include <linux/sysctl.h>
+
+#include <asm/irq.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/mach/time.h>
+
+#include <asm/mach/arch.h>
+#include <mach/dma.h>
+#include <mach/hardware.h>
+#include <mach/csp/mm_io.h>
+#include <mach/csp/chipcHw_def.h>
+#include <mach/csp/chipcHw_inline.h>
+
+#include <cfg_global.h>
+
+#include "core.h"
+
+HW_DECLARE_SPINLOCK(arch)
+HW_DECLARE_SPINLOCK(gpio)
+#if defined(CONFIG_DEBUG_SPINLOCK)
+    EXPORT_SYMBOL(bcmring_gpio_reg_lock);
+#endif
+
+/* FIXME: temporary solution */
+#define BCM_SYSCTL_REBOOT_WARM               1
+#define CTL_BCM_REBOOT                 112
+
+/* sysctl */
+int bcmring_arch_warm_reboot;	/* do a warm reboot on hard reset */
+
+static struct ctl_table_header *bcmring_sysctl_header;
+
+static struct ctl_table bcmring_sysctl_warm_reboot[] = {
+	{
+	 .ctl_name = BCM_SYSCTL_REBOOT_WARM,
+	 .procname = "warm",
+	 .data = &bcmring_arch_warm_reboot,
+	 .maxlen = sizeof(int),
+	 .mode = 0644,
+	 .proc_handler = &proc_dointvec},
+	{}
+};
+
+static struct ctl_table bcmring_sysctl_reboot[] = {
+	{
+	 .ctl_name = CTL_BCM_REBOOT,
+	 .procname = "reboot",
+	 .mode = 0555,
+	 .child = bcmring_sysctl_warm_reboot},
+	{}
+};
+
+static struct platform_device nand_device = {
+	.name = "bcm-nand",
+	.id = -1,
+};
+
+static struct platform_device *devices[] __initdata = {
+	&nand_device,
+};
+
+/****************************************************************************
+*
+*   Called from the customize_machine function in arch/arm/kernel/setup.c
+*
+*   The customize_machine function is tagged as an arch_initcall
+*   (see include/linux/init.h for the order that the various init sections
+*   are called in.
+*
+*****************************************************************************/
+static void __init bcmring_init_machine(void)
+{
+
+	bcmring_sysctl_header = register_sysctl_table(bcmring_sysctl_reboot);
+
+	/* Enable spread spectrum */
+	chipcHw_enableSpreadSpectrum();
+
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+
+	bcmring_amba_init();
+
+	dma_init();
+}
+
+/****************************************************************************
+*
+*   Called from setup_arch (in arch/arm/kernel/setup.c) to fixup any tags
+*   passed in by the boot loader.
+*
+*****************************************************************************/
+
+static void __init bcmring_fixup(struct machine_desc *desc,
+     struct tag *t, char **cmdline, struct meminfo *mi) {
+#ifdef CONFIG_BLK_DEV_INITRD
+	printk(KERN_NOTICE "bcmring_fixup\n");
+	t->hdr.tag = ATAG_CORE;
+	t->hdr.size = tag_size(tag_core);
+	t->u.core.flags = 0;
+	t->u.core.pagesize = PAGE_SIZE;
+	t->u.core.rootdev = 31 << 8 | 0;
+	t = tag_next(t);
+
+	t->hdr.tag = ATAG_MEM;
+	t->hdr.size = tag_size(tag_mem32);
+	t->u.mem.start = CFG_GLOBAL_RAM_BASE;
+	t->u.mem.size = CFG_GLOBAL_RAM_SIZE;
+
+	t = tag_next(t);
+
+	t->hdr.tag = ATAG_NONE;
+	t->hdr.size = 0;
+#endif
+}
+
+/****************************************************************************
+*
+*   Machine Description
+*
+*****************************************************************************/
+
+MACHINE_START(BCMRING, "BCMRING")
+	/* Maintainer: Broadcom Corporation */
+	.phys_io = MM_IO_START,
+	.io_pg_offst = (MM_IO_BASE >> 18) & 0xfffc,
+	.fixup = bcmring_fixup,
+	.map_io = bcmring_map_io,
+	.init_irq = bcmring_init_irq,
+	.timer = &bcmring_timer,
+	.init_machine = bcmring_init_machine
+MACHINE_END
diff --git a/arch/arm/mach-bcmring/clock.c b/arch/arm/mach-bcmring/clock.c
new file mode 100644
index 000000000000..14bafc38f2dc
--- /dev/null
+++ b/arch/arm/mach-bcmring/clock.c
@@ -0,0 +1,224 @@
+/*****************************************************************************
+* Copyright 2001 - 2009 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/string.h>
+#include <linux/clk.h>
+#include <linux/spinlock.h>
+#include <mach/csp/hw_cfg.h>
+#include <mach/csp/chipcHw_def.h>
+#include <mach/csp/chipcHw_reg.h>
+#include <mach/csp/chipcHw_inline.h>
+
+#include <asm/clkdev.h>
+
+#include "clock.h"
+
+#define clk_is_primary(x)       ((x)->type & CLK_TYPE_PRIMARY)
+#define clk_is_pll1(x)          ((x)->type & CLK_TYPE_PLL1)
+#define clk_is_pll2(x)          ((x)->type & CLK_TYPE_PLL2)
+#define clk_is_programmable(x)  ((x)->type & CLK_TYPE_PROGRAMMABLE)
+#define clk_is_bypassable(x)    ((x)->type & CLK_TYPE_BYPASSABLE)
+
+#define clk_is_using_xtal(x)    ((x)->mode & CLK_MODE_XTAL)
+
+static DEFINE_SPINLOCK(clk_lock);
+
+static void __clk_enable(struct clk *clk)
+{
+	if (!clk)
+		return;
+
+	/* enable parent clock first */
+	if (clk->parent)
+		__clk_enable(clk->parent);
+
+	if (clk->use_cnt++ == 0) {
+		if (clk_is_pll1(clk)) {	/* PLL1 */
+			chipcHw_pll1Enable(clk->rate_hz, 0);
+		} else if (clk_is_pll2(clk)) {	/* PLL2 */
+			chipcHw_pll2Enable(clk->rate_hz);
+		} else if (clk_is_using_xtal(clk)) {	/* source is crystal */
+			if (!clk_is_primary(clk))
+				chipcHw_bypassClockEnable(clk->csp_id);
+		} else {	/* source is PLL */
+			chipcHw_setClockEnable(clk->csp_id);
+		}
+	}
+}
+
+int clk_enable(struct clk *clk)
+{
+	unsigned long flags;
+
+	if (!clk)
+		return -EINVAL;
+
+	spin_lock_irqsave(&clk_lock, flags);
+	__clk_enable(clk);
+	spin_unlock_irqrestore(&clk_lock, flags);
+
+	return 0;
+}
+EXPORT_SYMBOL(clk_enable);
+
+static void __clk_disable(struct clk *clk)
+{
+	if (!clk)
+		return;
+
+	BUG_ON(clk->use_cnt == 0);
+
+	if (--clk->use_cnt == 0) {
+		if (clk_is_pll1(clk)) {	/* PLL1 */
+			chipcHw_pll1Disable();
+		} else if (clk_is_pll2(clk)) {	/* PLL2 */
+			chipcHw_pll2Disable();
+		} else if (clk_is_using_xtal(clk)) {	/* source is crystal */
+			if (!clk_is_primary(clk))
+				chipcHw_bypassClockDisable(clk->csp_id);
+		} else {	/* source is PLL */
+			chipcHw_setClockDisable(clk->csp_id);
+		}
+	}
+
+	if (clk->parent)
+		__clk_disable(clk->parent);
+}
+
+void clk_disable(struct clk *clk)
+{
+	unsigned long flags;
+
+	if (!clk)
+		return;
+
+	spin_lock_irqsave(&clk_lock, flags);
+	__clk_disable(clk);
+	spin_unlock_irqrestore(&clk_lock, flags);
+}
+EXPORT_SYMBOL(clk_disable);
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+	if (!clk)
+		return 0;
+
+	return clk->rate_hz;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+long clk_round_rate(struct clk *clk, unsigned long rate)
+{
+	unsigned long flags;
+	unsigned long actual;
+	unsigned long rate_hz;
+
+	if (!clk)
+		return -EINVAL;
+
+	if (!clk_is_programmable(clk))
+		return -EINVAL;
+
+	if (clk->use_cnt)
+		return -EBUSY;
+
+	spin_lock_irqsave(&clk_lock, flags);
+	actual = clk->parent->rate_hz;
+	rate_hz = min(actual, rate);
+	spin_unlock_irqrestore(&clk_lock, flags);
+
+	return rate_hz;
+}
+EXPORT_SYMBOL(clk_round_rate);
+
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+	unsigned long flags;
+	unsigned long actual;
+	unsigned long rate_hz;
+
+	if (!clk)
+		return -EINVAL;
+
+	if (!clk_is_programmable(clk))
+		return -EINVAL;
+
+	if (clk->use_cnt)
+		return -EBUSY;
+
+	spin_lock_irqsave(&clk_lock, flags);
+	actual = clk->parent->rate_hz;
+	rate_hz = min(actual, rate);
+	rate_hz = chipcHw_setClockFrequency(clk->csp_id, rate_hz);
+	clk->rate_hz = rate_hz;
+	spin_unlock_irqrestore(&clk_lock, flags);
+
+	return 0;
+}
+EXPORT_SYMBOL(clk_set_rate);
+
+struct clk *clk_get_parent(struct clk *clk)
+{
+	if (!clk)
+		return NULL;
+
+	return clk->parent;
+}
+EXPORT_SYMBOL(clk_get_parent);
+
+int clk_set_parent(struct clk *clk, struct clk *parent)
+{
+	unsigned long flags;
+	struct clk *old_parent;
+
+	if (!clk || !parent)
+		return -EINVAL;
+
+	if (!clk_is_primary(parent) || !clk_is_bypassable(clk))
+		return -EINVAL;
+
+	/* if more than one user, parent is not allowed */
+	if (clk->use_cnt > 1)
+		return -EBUSY;
+
+	if (clk->parent == parent)
+		return 0;
+
+	spin_lock_irqsave(&clk_lock, flags);
+	old_parent = clk->parent;
+	clk->parent = parent;
+	if (clk_is_using_xtal(parent))
+		clk->mode |= CLK_MODE_XTAL;
+	else
+		clk->mode &= (~CLK_MODE_XTAL);
+
+	/* if clock is active */
+	if (clk->use_cnt != 0) {
+		clk->use_cnt--;
+		/* enable clock with the new parent */
+		__clk_enable(clk);
+		/* disable the old parent */
+		__clk_disable(old_parent);
+	}
+	spin_unlock_irqrestore(&clk_lock, flags);
+
+	return 0;
+}
+EXPORT_SYMBOL(clk_set_parent);
diff --git a/arch/arm/mach-bcmring/clock.h b/arch/arm/mach-bcmring/clock.h
new file mode 100644
index 000000000000..5e0b98138973
--- /dev/null
+++ b/arch/arm/mach-bcmring/clock.h
@@ -0,0 +1,33 @@
+/*****************************************************************************
+* Copyright 2001 - 2009 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+#include <mach/csp/chipcHw_def.h>
+
+#define CLK_TYPE_PRIMARY         1	/* primary clock must NOT have a parent */
+#define CLK_TYPE_PLL1            2	/* PPL1 */
+#define CLK_TYPE_PLL2            4	/* PPL2 */
+#define CLK_TYPE_PROGRAMMABLE    8	/* programmable clock rate */
+#define CLK_TYPE_BYPASSABLE      16	/* parent can be changed */
+
+#define CLK_MODE_XTAL            1	/* clock source is from crystal */
+
+struct clk {
+	const char *name;	/* clock name */
+	unsigned int type;	/* clock type */
+	unsigned int mode;	/* current mode */
+	volatile int use_bypass;	/* indicate if it's in bypass mode */
+	chipcHw_CLOCK_e csp_id;	/* clock ID for CSP CHIPC */
+	unsigned long rate_hz;	/* clock rate in Hz */
+	unsigned int use_cnt;	/* usage count */
+	struct clk *parent;	/* parent clock */
+};
diff --git a/arch/arm/mach-bcmring/core.c b/arch/arm/mach-bcmring/core.c
new file mode 100644
index 000000000000..492c649f451e
--- /dev/null
+++ b/arch/arm/mach-bcmring/core.c
@@ -0,0 +1,367 @@
+/*
+ *  derived from linux/arch/arm/mach-versatile/core.c
+ *  linux/arch/arm/mach-bcmring/core.c
+ *
+ *  Copyright (C) 1999 - 2003 ARM Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+/* Portions copyright Broadcom 2008 */
+
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/sysdev.h>
+#include <linux/interrupt.h>
+#include <linux/amba/bus.h>
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
+
+#include <linux/amba/bus.h>
+#include <mach/csp/mm_addr.h>
+#include <mach/hardware.h>
+#include <asm/clkdev.h>
+#include <linux/io.h>
+#include <asm/irq.h>
+#include <asm/hardware/arm_timer.h>
+#include <asm/mach-types.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+#include <asm/mach/mmc.h>
+
+#include <cfg_global.h>
+
+#include "clock.h"
+
+#include <csp/secHw.h>
+#include <mach/csp/secHw_def.h>
+#include <mach/csp/chipcHw_inline.h>
+#include <mach/csp/tmrHw_reg.h>
+
+#define AMBA_DEVICE(name, initname, base, plat, size)       \
+static struct amba_device name##_device = {     \
+   .dev = {                                     \
+      .coherent_dma_mask = ~0,                  \
+      .init_name = initname,                    \
+      .platform_data = plat                     \
+   },                                           \
+   .res = {                                     \
+      .start = MM_ADDR_IO_##base,               \
+		.end = MM_ADDR_IO_##base + (size) - 1,    \
+      .flags = IORESOURCE_MEM                   \
+   },                                           \
+   .dma_mask = ~0,                              \
+   .irq = {                                     \
+      IRQ_##base                                \
+   }                                            \
+}
+
+
+AMBA_DEVICE(uartA, "uarta", UARTA, NULL, SZ_4K);
+AMBA_DEVICE(uartB, "uartb", UARTB, NULL, SZ_4K);
+
+static struct clk pll1_clk = {
+	.name = "PLL1",
+	.type = CLK_TYPE_PRIMARY | CLK_TYPE_PLL1,
+	.rate_hz = 2000000000,
+	.use_cnt = 7,
+};
+
+static struct clk uart_clk = {
+	.name = "UART",
+	.type = CLK_TYPE_PROGRAMMABLE,
+	.csp_id = chipcHw_CLOCK_UART,
+	.rate_hz = HW_CFG_UART_CLK_HZ,
+	.parent = &pll1_clk,
+};
+
+static struct clk_lookup lookups[] = {
+	{			/* UART0 */
+	 .dev_id = "uarta",
+	 .clk = &uart_clk,
+	 }, {			/* UART1 */
+	     .dev_id = "uartb",
+	     .clk = &uart_clk,
+	     }
+};
+
+static struct amba_device *amba_devs[] __initdata = {
+	&uartA_device,
+	&uartB_device,
+};
+
+void __init bcmring_amba_init(void)
+{
+	int i;
+	u32 bus_clock;
+
+/* Linux is run initially in non-secure mode. Secure peripherals */
+/* generate FIQ, and must be handled in secure mode. Until we have */
+/* a linux security monitor implementation, keep everything in */
+/* non-secure mode. */
+	chipcHw_busInterfaceClockEnable(chipcHw_REG_BUS_CLOCK_SPU);
+	secHw_setUnsecure(secHw_BLK_MASK_CHIP_CONTROL |
+			  secHw_BLK_MASK_KEY_SCAN |
+			  secHw_BLK_MASK_TOUCH_SCREEN |
+			  secHw_BLK_MASK_UART0 |
+			  secHw_BLK_MASK_UART1 |
+			  secHw_BLK_MASK_WATCHDOG |
+			  secHw_BLK_MASK_SPUM |
+			  secHw_BLK_MASK_DDR2 |
+			  secHw_BLK_MASK_SPU |
+			  secHw_BLK_MASK_PKA |
+			  secHw_BLK_MASK_RNG |
+			  secHw_BLK_MASK_RTC |
+			  secHw_BLK_MASK_OTP |
+			  secHw_BLK_MASK_BOOT |
+			  secHw_BLK_MASK_MPU |
+			  secHw_BLK_MASK_TZCTRL | secHw_BLK_MASK_INTR);
+
+	/* Only the devices attached to the AMBA bus are enabled just before the bus is */
+	/* scanned and the drivers are loaded. The clocks need to be on for the AMBA bus */
+	/* driver to access these blocks. The bus is probed, and the drivers are loaded. */
+	/* FIXME Need to remove enable of PIF once CLCD clock enable used properly in FPGA. */
+	bus_clock = chipcHw_REG_BUS_CLOCK_GE
+	    | chipcHw_REG_BUS_CLOCK_SDIO0 | chipcHw_REG_BUS_CLOCK_SDIO1;
+
+	chipcHw_busInterfaceClockEnable(bus_clock);
+
+	for (i = 0; i < ARRAY_SIZE(lookups); i++)
+		clkdev_add(&lookups[i]);
+
+	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
+		struct amba_device *d = amba_devs[i];
+		amba_device_register(d, &iomem_resource);
+	}
+}
+
+/*
+ * Where is the timer (VA)?
+ */
+#define TIMER0_VA_BASE		 MM_IO_BASE_TMR
+#define TIMER1_VA_BASE		(MM_IO_BASE_TMR + 0x20)
+#define TIMER2_VA_BASE		(MM_IO_BASE_TMR + 0x40)
+#define TIMER3_VA_BASE          (MM_IO_BASE_TMR + 0x60)
+
+/* Timer 0 - 25 MHz, Timer3 at bus clock rate, typically  150-166 MHz */
+#if defined(CONFIG_ARCH_FPGA11107)
+/* fpga cpu/bus are currently 30 times slower so scale frequency as well to */
+/* slow down Linux's sense of time */
+#define TIMER0_FREQUENCY_MHZ  (tmrHw_LOW_FREQUENCY_MHZ * 30)
+#define TIMER1_FREQUENCY_MHZ  (tmrHw_LOW_FREQUENCY_MHZ * 30)
+#define TIMER3_FREQUENCY_MHZ  (tmrHw_HIGH_FREQUENCY_MHZ * 30)
+#define TIMER3_FREQUENCY_KHZ   (tmrHw_HIGH_FREQUENCY_HZ / 1000 * 30)
+#else
+#define TIMER0_FREQUENCY_MHZ  tmrHw_LOW_FREQUENCY_MHZ
+#define TIMER1_FREQUENCY_MHZ  tmrHw_LOW_FREQUENCY_MHZ
+#define TIMER3_FREQUENCY_MHZ  tmrHw_HIGH_FREQUENCY_MHZ
+#define TIMER3_FREQUENCY_KHZ  (tmrHw_HIGH_FREQUENCY_HZ / 1000)
+#endif
+
+#define TICKS_PER_uSEC     TIMER0_FREQUENCY_MHZ
+
+/*
+ *  These are useconds NOT ticks.
+ *
+ */
+#define mSEC_1                          1000
+#define mSEC_5                          (mSEC_1 * 5)
+#define mSEC_10                         (mSEC_1 * 10)
+#define mSEC_25                         (mSEC_1 * 25)
+#define SEC_1                           (mSEC_1 * 1000)
+
+/*
+ * How long is the timer interval?
+ */
+#define TIMER_INTERVAL	(TICKS_PER_uSEC * mSEC_10)
+#if TIMER_INTERVAL >= 0x100000
+#define TIMER_RELOAD	(TIMER_INTERVAL >> 8)
+#define TIMER_DIVISOR	(TIMER_CTRL_DIV256)
+#define TICKS2USECS(x)	(256 * (x) / TICKS_PER_uSEC)
+#elif TIMER_INTERVAL >= 0x10000
+#define TIMER_RELOAD	(TIMER_INTERVAL >> 4)	/* Divide by 16 */
+#define TIMER_DIVISOR	(TIMER_CTRL_DIV16)
+#define TICKS2USECS(x)	(16 * (x) / TICKS_PER_uSEC)
+#else
+#define TIMER_RELOAD	(TIMER_INTERVAL)
+#define TIMER_DIVISOR	(TIMER_CTRL_DIV1)
+#define TICKS2USECS(x)	((x) / TICKS_PER_uSEC)
+#endif
+
+static void timer_set_mode(enum clock_event_mode mode,
+			   struct clock_event_device *clk)
+{
+	unsigned long ctrl;
+
+	switch (mode) {
+	case CLOCK_EVT_MODE_PERIODIC:
+		writel(TIMER_RELOAD, TIMER0_VA_BASE + TIMER_LOAD);
+
+		ctrl = TIMER_CTRL_PERIODIC;
+		ctrl |=
+		    TIMER_DIVISOR | TIMER_CTRL_32BIT | TIMER_CTRL_IE |
+		    TIMER_CTRL_ENABLE;
+		break;
+	case CLOCK_EVT_MODE_ONESHOT:
+		/* period set, and timer enabled in 'next_event' hook */
+		ctrl = TIMER_CTRL_ONESHOT;
+		ctrl |= TIMER_DIVISOR | TIMER_CTRL_32BIT | TIMER_CTRL_IE;
+		break;
+	case CLOCK_EVT_MODE_UNUSED:
+	case CLOCK_EVT_MODE_SHUTDOWN:
+	default:
+		ctrl = 0;
+	}
+
+	writel(ctrl, TIMER0_VA_BASE + TIMER_CTRL);
+}
+
+static int timer_set_next_event(unsigned long evt,
+				struct clock_event_device *unused)
+{
+	unsigned long ctrl = readl(TIMER0_VA_BASE + TIMER_CTRL);
+
+	writel(evt, TIMER0_VA_BASE + TIMER_LOAD);
+	writel(ctrl | TIMER_CTRL_ENABLE, TIMER0_VA_BASE + TIMER_CTRL);
+
+	return 0;
+}
+
+static struct clock_event_device timer0_clockevent = {
+	.name = "timer0",
+	.shift = 32,
+	.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+	.set_mode = timer_set_mode,
+	.set_next_event = timer_set_next_event,
+};
+
+/*
+ * IRQ handler for the timer
+ */
+static irqreturn_t bcmring_timer_interrupt(int irq, void *dev_id)
+{
+	struct clock_event_device *evt = &timer0_clockevent;
+
+	writel(1, TIMER0_VA_BASE + TIMER_INTCLR);
+
+	evt->event_handler(evt);
+
+	return IRQ_HANDLED;
+}
+
+static struct irqaction bcmring_timer_irq = {
+	.name = "bcmring Timer Tick",
+	.flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+	.handler = bcmring_timer_interrupt,
+};
+
+static cycle_t bcmring_get_cycles_timer1(void)
+{
+	return ~readl(TIMER1_VA_BASE + TIMER_VALUE);
+}
+
+static cycle_t bcmring_get_cycles_timer3(void)
+{
+	return ~readl(TIMER3_VA_BASE + TIMER_VALUE);
+}
+
+static struct clocksource clocksource_bcmring_timer1 = {
+	.name = "timer1",
+	.rating = 200,
+	.read = bcmring_get_cycles_timer1,
+	.mask = CLOCKSOURCE_MASK(32),
+	.shift = 20,
+	.flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static struct clocksource clocksource_bcmring_timer3 = {
+	.name = "timer3",
+	.rating = 100,
+	.read = bcmring_get_cycles_timer3,
+	.mask = CLOCKSOURCE_MASK(32),
+	.shift = 20,
+	.flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static int __init bcmring_clocksource_init(void)
+{
+	/* setup timer1 as free-running clocksource */
+	writel(0, TIMER1_VA_BASE + TIMER_CTRL);
+	writel(0xffffffff, TIMER1_VA_BASE + TIMER_LOAD);
+	writel(0xffffffff, TIMER1_VA_BASE + TIMER_VALUE);
+	writel(TIMER_CTRL_32BIT | TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC,
+	       TIMER1_VA_BASE + TIMER_CTRL);
+
+	clocksource_bcmring_timer1.mult =
+	    clocksource_khz2mult(TIMER1_FREQUENCY_MHZ * 1000,
+				 clocksource_bcmring_timer1.shift);
+	clocksource_register(&clocksource_bcmring_timer1);
+
+	/* setup timer3 as free-running clocksource */
+	writel(0, TIMER3_VA_BASE + TIMER_CTRL);
+	writel(0xffffffff, TIMER3_VA_BASE + TIMER_LOAD);
+	writel(0xffffffff, TIMER3_VA_BASE + TIMER_VALUE);
+	writel(TIMER_CTRL_32BIT | TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC,
+	       TIMER3_VA_BASE + TIMER_CTRL);
+
+	clocksource_bcmring_timer3.mult =
+	    clocksource_khz2mult(TIMER3_FREQUENCY_KHZ,
+				 clocksource_bcmring_timer3.shift);
+	clocksource_register(&clocksource_bcmring_timer3);
+
+	return 0;
+}
+
+/*
+ * Set up timer interrupt, and return the current time in seconds.
+ */
+void __init bcmring_init_timer(void)
+{
+	printk(KERN_INFO "bcmring_init_timer\n");
+	/*
+	 * Initialise to a known state (all timers off)
+	 */
+	writel(0, TIMER0_VA_BASE + TIMER_CTRL);
+	writel(0, TIMER1_VA_BASE + TIMER_CTRL);
+	writel(0, TIMER2_VA_BASE + TIMER_CTRL);
+	writel(0, TIMER3_VA_BASE + TIMER_CTRL);
+
+	/*
+	 * Make irqs happen for the system timer
+	 */
+	setup_irq(IRQ_TIMER0, &bcmring_timer_irq);
+
+	bcmring_clocksource_init();
+
+	timer0_clockevent.mult =
+	    div_sc(1000000, NSEC_PER_SEC, timer0_clockevent.shift);
+	timer0_clockevent.max_delta_ns =
+	    clockevent_delta2ns(0xffffffff, &timer0_clockevent);
+	timer0_clockevent.min_delta_ns =
+	    clockevent_delta2ns(0xf, &timer0_clockevent);
+
+	timer0_clockevent.cpumask = cpumask_of(0);
+	clockevents_register_device(&timer0_clockevent);
+}
+
+struct sys_timer bcmring_timer = {
+	.init = bcmring_init_timer,
+};
diff --git a/arch/arm/mach-bcmring/core.h b/arch/arm/mach-bcmring/core.h
new file mode 100644
index 000000000000..b197ba48e36e
--- /dev/null
+++ b/arch/arm/mach-bcmring/core.h
@@ -0,0 +1,30 @@
+/*
+ *  linux/arch/arm/mach-versatile/core.h
+ *
+ *  Copyright (C) 2004 ARM Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+/* Portions copyright Broadcom 2008 */
+#ifndef __ASM_ARCH_BCMRING_H
+#define __ASM_ARCH_BCMRING_H
+
+void __init bcmring_amba_init(void);
+void __init bcmring_map_io(void);
+void __init bcmring_init_irq(void);
+
+extern struct sys_timer bcmring_timer;
+#endif
diff --git a/arch/arm/mach-bcmring/csp/Makefile b/arch/arm/mach-bcmring/csp/Makefile
new file mode 100644
index 000000000000..648c0377530e
--- /dev/null
+++ b/arch/arm/mach-bcmring/csp/Makefile
@@ -0,0 +1,3 @@
+obj-y += dmac/
+obj-y += tmr/
+obj-y += chipc/
diff --git a/arch/arm/mach-bcmring/csp/chipc/Makefile b/arch/arm/mach-bcmring/csp/chipc/Makefile
new file mode 100644
index 000000000000..673952768ee5
--- /dev/null
+++ b/arch/arm/mach-bcmring/csp/chipc/Makefile
@@ -0,0 +1 @@
+obj-y += chipcHw.o chipcHw_str.o chipcHw_reset.o chipcHw_init.o
diff --git a/arch/arm/mach-bcmring/csp/chipc/chipcHw.c b/arch/arm/mach-bcmring/csp/chipc/chipcHw.c
new file mode 100644
index 000000000000..b3a61d860c65
--- /dev/null
+++ b/arch/arm/mach-bcmring/csp/chipc/chipcHw.c
@@ -0,0 +1,776 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*  @file    chipcHw.c
+*
+*  @brief   Low level Various CHIP clock controlling routines
+*
+*  @note
+*
+*   These routines provide basic clock controlling functionality only.
+*/
+/****************************************************************************/
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#include <csp/errno.h>
+#include <csp/stdint.h>
+#include <csp/module.h>
+
+#include <mach/csp/chipcHw_def.h>
+#include <mach/csp/chipcHw_inline.h>
+
+#include <csp/reg.h>
+#include <csp/delay.h>
+
+/* ---- Private Constants and Types --------------------------------------- */
+
+/* VPM alignment algorithm uses this */
+#define MAX_PHASE_ADJUST_COUNT         0xFFFF	/* Max number of times allowed to adjust the phase */
+#define MAX_PHASE_ALIGN_ATTEMPTS       10	/* Max number of attempt to align the phase */
+
+/* Local definition of clock type */
+#define PLL_CLOCK                      1	/* PLL Clock */
+#define NON_PLL_CLOCK                  2	/* Divider clock */
+
+static int chipcHw_divide(int num, int denom)
+    __attribute__ ((section(".aramtext")));
+
+/****************************************************************************/
+/**
+*  @brief   Set clock fequency for miscellaneous configurable clocks
+*
+*  This function sets clock frequency
+*
+*  @return  Configured clock frequency in hertz
+*
+*/
+/****************************************************************************/
+chipcHw_freq chipcHw_getClockFrequency(chipcHw_CLOCK_e clock	/*  [ IN ] Configurable clock */
+    ) {
+	volatile uint32_t *pPLLReg = (uint32_t *) 0x0;
+	volatile uint32_t *pClockCtrl = (uint32_t *) 0x0;
+	volatile uint32_t *pDependentClock = (uint32_t *) 0x0;
+	uint32_t vcoFreqPll1Hz = 0;	/* Effective VCO frequency for PLL1 in Hz */
+	uint32_t vcoFreqPll2Hz = 0;	/* Effective VCO frequency for PLL2 in Hz */
+	uint32_t dependentClockType = 0;
+	uint32_t vcoHz = 0;
+
+	/* Get VCO frequencies */
+	if ((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASK) != chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER) {
+		uint64_t adjustFreq = 0;
+
+		vcoFreqPll1Hz = chipcHw_XTAL_FREQ_Hz *
+		    chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) *
+		    ((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >>
+		     chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT);
+
+		/* Adjusted frequency due to chipcHw_REG_PLL_DIVIDER_NDIV_f_SS */
+		adjustFreq = (uint64_t) chipcHw_XTAL_FREQ_Hz *
+			(uint64_t) chipcHw_REG_PLL_DIVIDER_NDIV_f_SS *
+			chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, (chipcHw_REG_PLL_PREDIVIDER_P2 * (uint64_t) chipcHw_REG_PLL_DIVIDER_FRAC));
+		vcoFreqPll1Hz += (uint32_t) adjustFreq;
+	} else {
+		vcoFreqPll1Hz = chipcHw_XTAL_FREQ_Hz *
+		    chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) *
+		    ((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >>
+		     chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT);
+	}
+	vcoFreqPll2Hz =
+	    chipcHw_XTAL_FREQ_Hz *
+		 chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) *
+	    ((pChipcHw->PLLPreDivider2 & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >>
+	     chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT);
+
+	switch (clock) {
+	case chipcHw_CLOCK_DDR:
+		pPLLReg = &pChipcHw->DDRClock;
+		vcoHz = vcoFreqPll1Hz;
+		break;
+	case chipcHw_CLOCK_ARM:
+		pPLLReg = &pChipcHw->ARMClock;
+		vcoHz = vcoFreqPll1Hz;
+		break;
+	case chipcHw_CLOCK_ESW:
+		pPLLReg = &pChipcHw->ESWClock;
+		vcoHz = vcoFreqPll1Hz;
+		break;
+	case chipcHw_CLOCK_VPM:
+		pPLLReg = &pChipcHw->VPMClock;
+		vcoHz = vcoFreqPll1Hz;
+		break;
+	case chipcHw_CLOCK_ESW125:
+		pPLLReg = &pChipcHw->ESW125Clock;
+		vcoHz = vcoFreqPll1Hz;
+		break;
+	case chipcHw_CLOCK_UART:
+		pPLLReg = &pChipcHw->UARTClock;
+		vcoHz = vcoFreqPll1Hz;
+		break;
+	case chipcHw_CLOCK_SDIO0:
+		pPLLReg = &pChipcHw->SDIO0Clock;
+		vcoHz = vcoFreqPll1Hz;
+		break;
+	case chipcHw_CLOCK_SDIO1:
+		pPLLReg = &pChipcHw->SDIO1Clock;
+		vcoHz = vcoFreqPll1Hz;
+		break;
+	case chipcHw_CLOCK_SPI:
+		pPLLReg = &pChipcHw->SPIClock;
+		vcoHz = vcoFreqPll1Hz;
+		break;
+	case chipcHw_CLOCK_ETM:
+		pPLLReg = &pChipcHw->ETMClock;
+		vcoHz = vcoFreqPll1Hz;
+		break;
+	case chipcHw_CLOCK_USB:
+		pPLLReg = &pChipcHw->USBClock;
+		vcoHz = vcoFreqPll2Hz;
+		break;
+	case chipcHw_CLOCK_LCD:
+		pPLLReg = &pChipcHw->LCDClock;
+		vcoHz = vcoFreqPll2Hz;
+		break;
+	case chipcHw_CLOCK_APM:
+		pPLLReg = &pChipcHw->APMClock;
+		vcoHz = vcoFreqPll2Hz;
+		break;
+	case chipcHw_CLOCK_BUS:
+		pClockCtrl = &pChipcHw->ACLKClock;
+		pDependentClock = &pChipcHw->ARMClock;
+		vcoHz = vcoFreqPll1Hz;
+		dependentClockType = PLL_CLOCK;
+		break;
+	case chipcHw_CLOCK_OTP:
+		pClockCtrl = &pChipcHw->OTPClock;
+		break;
+	case chipcHw_CLOCK_I2C:
+		pClockCtrl = &pChipcHw->I2CClock;
+		break;
+	case chipcHw_CLOCK_I2S0:
+		pClockCtrl = &pChipcHw->I2S0Clock;
+		break;
+	case chipcHw_CLOCK_RTBUS:
+		pClockCtrl = &pChipcHw->RTBUSClock;
+		pDependentClock = &pChipcHw->ACLKClock;
+		dependentClockType = NON_PLL_CLOCK;
+		break;
+	case chipcHw_CLOCK_APM100:
+		pClockCtrl = &pChipcHw->APM100Clock;
+		pDependentClock = &pChipcHw->APMClock;
+		vcoHz = vcoFreqPll2Hz;
+		dependentClockType = PLL_CLOCK;
+		break;
+	case chipcHw_CLOCK_TSC:
+		pClockCtrl = &pChipcHw->TSCClock;
+		break;
+	case chipcHw_CLOCK_LED:
+		pClockCtrl = &pChipcHw->LEDClock;
+		break;
+	case chipcHw_CLOCK_I2S1:
+		pClockCtrl = &pChipcHw->I2S1Clock;
+		break;
+	}
+
+	if (pPLLReg) {
+		/* Obtain PLL clock frequency */
+		if (*pPLLReg & chipcHw_REG_PLL_CLOCK_BYPASS_SELECT) {
+			/* Return crystal clock frequency when bypassed */
+			return chipcHw_XTAL_FREQ_Hz;
+		} else if (clock == chipcHw_CLOCK_DDR) {
+			/* DDR frequency is configured in PLLDivider register */
+			return chipcHw_divide (vcoHz, (((pChipcHw->PLLDivider & 0xFF000000) >> 24) ? ((pChipcHw->PLLDivider & 0xFF000000) >> 24) : 256));
+		} else {
+			/* From chip revision number B0, LCD clock is internally divided by 2 */
+			if ((pPLLReg == &pChipcHw->LCDClock) && (chipcHw_getChipRevisionNumber() != chipcHw_REV_NUMBER_A0)) {
+				vcoHz >>= 1;
+			}
+			/* Obtain PLL clock frequency using VCO dividers */
+			return chipcHw_divide(vcoHz, ((*pPLLReg & chipcHw_REG_PLL_CLOCK_MDIV_MASK) ? (*pPLLReg & chipcHw_REG_PLL_CLOCK_MDIV_MASK) : 256));
+		}
+	} else if (pClockCtrl) {
+		/* Obtain divider clock frequency */
+		uint32_t div;
+		uint32_t freq = 0;
+
+		if (*pClockCtrl & chipcHw_REG_DIV_CLOCK_BYPASS_SELECT) {
+			/* Return crystal clock frequency when bypassed */
+			return chipcHw_XTAL_FREQ_Hz;
+		} else if (pDependentClock) {
+			/* Identify the dependent clock frequency */
+			switch (dependentClockType) {
+			case PLL_CLOCK:
+				if (*pDependentClock & chipcHw_REG_PLL_CLOCK_BYPASS_SELECT) {
+					/* Use crystal clock frequency when dependent PLL clock is bypassed */
+					freq = chipcHw_XTAL_FREQ_Hz;
+				} else {
+					/* Obtain PLL clock frequency using VCO dividers */
+					div = *pDependentClock & chipcHw_REG_PLL_CLOCK_MDIV_MASK;
+					freq = div ? chipcHw_divide(vcoHz, div) : 0;
+				}
+				break;
+			case NON_PLL_CLOCK:
+				if (pDependentClock == (uint32_t *) &pChipcHw->ACLKClock) {
+					freq = chipcHw_getClockFrequency (chipcHw_CLOCK_BUS);
+				} else {
+					if (*pDependentClock & chipcHw_REG_DIV_CLOCK_BYPASS_SELECT) {
+						/* Use crystal clock frequency when dependent divider clock is bypassed */
+						freq = chipcHw_XTAL_FREQ_Hz;
+					} else {
+						/* Obtain divider clock frequency using XTAL dividers */
+						div = *pDependentClock & chipcHw_REG_DIV_CLOCK_DIV_MASK;
+						freq = chipcHw_divide (chipcHw_XTAL_FREQ_Hz, (div ? div : 256));
+					}
+				}
+				break;
+			}
+		} else {
+			/* Dependent on crystal clock */
+			freq = chipcHw_XTAL_FREQ_Hz;
+		}
+
+		div = *pClockCtrl & chipcHw_REG_DIV_CLOCK_DIV_MASK;
+		return chipcHw_divide(freq, (div ? div : 256));
+	}
+	return 0;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Set clock fequency for miscellaneous configurable clocks
+*
+*  This function sets clock frequency
+*
+*  @return  Configured clock frequency in Hz
+*
+*/
+/****************************************************************************/
+chipcHw_freq chipcHw_setClockFrequency(chipcHw_CLOCK_e clock,	/*  [ IN ] Configurable clock */
+				       uint32_t freq	/*  [ IN ] Clock frequency in Hz */
+    ) {
+	volatile uint32_t *pPLLReg = (uint32_t *) 0x0;
+	volatile uint32_t *pClockCtrl = (uint32_t *) 0x0;
+	volatile uint32_t *pDependentClock = (uint32_t *) 0x0;
+	uint32_t vcoFreqPll1Hz = 0;	/* Effective VCO frequency for PLL1 in Hz */
+	uint32_t desVcoFreqPll1Hz = 0;	/* Desired VCO frequency for PLL1 in Hz */
+	uint32_t vcoFreqPll2Hz = 0;	/* Effective VCO frequency for PLL2 in Hz */
+	uint32_t dependentClockType = 0;
+	uint32_t vcoHz = 0;
+	uint32_t desVcoHz = 0;
+
+	/* Get VCO frequencies */
+	if ((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASK) != chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER) {
+		uint64_t adjustFreq = 0;
+
+		vcoFreqPll1Hz = chipcHw_XTAL_FREQ_Hz *
+		    chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) *
+		    ((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >>
+		     chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT);
+
+		/* Adjusted frequency due to chipcHw_REG_PLL_DIVIDER_NDIV_f_SS */
+		adjustFreq = (uint64_t) chipcHw_XTAL_FREQ_Hz *
+			(uint64_t) chipcHw_REG_PLL_DIVIDER_NDIV_f_SS *
+			chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, (chipcHw_REG_PLL_PREDIVIDER_P2 * (uint64_t) chipcHw_REG_PLL_DIVIDER_FRAC));
+		vcoFreqPll1Hz += (uint32_t) adjustFreq;
+
+		/* Desired VCO frequency */
+		desVcoFreqPll1Hz = chipcHw_XTAL_FREQ_Hz *
+		    chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) *
+		    (((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >>
+		      chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT) + 1);
+	} else {
+		vcoFreqPll1Hz = desVcoFreqPll1Hz = chipcHw_XTAL_FREQ_Hz *
+		    chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) *
+		    ((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >>
+		     chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT);
+	}
+	vcoFreqPll2Hz = chipcHw_XTAL_FREQ_Hz * chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) *
+	    ((pChipcHw->PLLPreDivider2 & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >>
+	     chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT);
+
+	switch (clock) {
+	case chipcHw_CLOCK_DDR:
+		/* Configure the DDR_ctrl:BUS ratio settings */
+		{
+			REG_LOCAL_IRQ_SAVE;
+			/* Dvide DDR_phy by two to obtain DDR_ctrl clock */
+			pChipcHw->DDRClock = (pChipcHw->DDRClock & ~chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_MASK) | ((((freq / 2) / chipcHw_getClockFrequency(chipcHw_CLOCK_BUS)) - 1)
+				<< chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_SHIFT);
+			REG_LOCAL_IRQ_RESTORE;
+		}
+		pPLLReg = &pChipcHw->DDRClock;
+		vcoHz = vcoFreqPll1Hz;
+		desVcoHz = desVcoFreqPll1Hz;
+		break;
+	case chipcHw_CLOCK_ARM:
+		pPLLReg = &pChipcHw->ARMClock;
+		vcoHz = vcoFreqPll1Hz;
+		desVcoHz = desVcoFreqPll1Hz;
+		break;
+	case chipcHw_CLOCK_ESW:
+		pPLLReg = &pChipcHw->ESWClock;
+		vcoHz = vcoFreqPll1Hz;
+		desVcoHz = desVcoFreqPll1Hz;
+		break;
+	case chipcHw_CLOCK_VPM:
+		/* Configure the VPM:BUS ratio settings */
+		{
+			REG_LOCAL_IRQ_SAVE;
+			pChipcHw->VPMClock = (pChipcHw->VPMClock & ~chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_MASK) | ((chipcHw_divide (freq, chipcHw_getClockFrequency(chipcHw_CLOCK_BUS)) - 1)
+				<< chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_SHIFT);
+			REG_LOCAL_IRQ_RESTORE;
+		}
+		pPLLReg = &pChipcHw->VPMClock;
+		vcoHz = vcoFreqPll1Hz;
+		desVcoHz = desVcoFreqPll1Hz;
+		break;
+	case chipcHw_CLOCK_ESW125:
+		pPLLReg = &pChipcHw->ESW125Clock;
+		vcoHz = vcoFreqPll1Hz;
+		desVcoHz = desVcoFreqPll1Hz;
+		break;
+	case chipcHw_CLOCK_UART:
+		pPLLReg = &pChipcHw->UARTClock;
+		vcoHz = vcoFreqPll1Hz;
+		desVcoHz = desVcoFreqPll1Hz;
+		break;
+	case chipcHw_CLOCK_SDIO0:
+		pPLLReg = &pChipcHw->SDIO0Clock;
+		vcoHz = vcoFreqPll1Hz;
+		desVcoHz = desVcoFreqPll1Hz;
+		break;
+	case chipcHw_CLOCK_SDIO1:
+		pPLLReg = &pChipcHw->SDIO1Clock;
+		vcoHz = vcoFreqPll1Hz;
+		desVcoHz = desVcoFreqPll1Hz;
+		break;
+	case chipcHw_CLOCK_SPI:
+		pPLLReg = &pChipcHw->SPIClock;
+		vcoHz = vcoFreqPll1Hz;
+		desVcoHz = desVcoFreqPll1Hz;
+		break;
+	case chipcHw_CLOCK_ETM:
+		pPLLReg = &pChipcHw->ETMClock;
+		vcoHz = vcoFreqPll1Hz;
+		desVcoHz = desVcoFreqPll1Hz;
+		break;
+	case chipcHw_CLOCK_USB:
+		pPLLReg = &pChipcHw->USBClock;
+		vcoHz = vcoFreqPll2Hz;
+		desVcoHz = vcoFreqPll2Hz;
+		break;
+	case chipcHw_CLOCK_LCD:
+		pPLLReg = &pChipcHw->LCDClock;
+		vcoHz = vcoFreqPll2Hz;
+		desVcoHz = vcoFreqPll2Hz;
+		break;
+	case chipcHw_CLOCK_APM:
+		pPLLReg = &pChipcHw->APMClock;
+		vcoHz = vcoFreqPll2Hz;
+		desVcoHz = vcoFreqPll2Hz;
+		break;
+	case chipcHw_CLOCK_BUS:
+		pClockCtrl = &pChipcHw->ACLKClock;
+		pDependentClock = &pChipcHw->ARMClock;
+		vcoHz = vcoFreqPll1Hz;
+		desVcoHz = desVcoFreqPll1Hz;
+		dependentClockType = PLL_CLOCK;
+		break;
+	case chipcHw_CLOCK_OTP:
+		pClockCtrl = &pChipcHw->OTPClock;
+		break;
+	case chipcHw_CLOCK_I2C:
+		pClockCtrl = &pChipcHw->I2CClock;
+		break;
+	case chipcHw_CLOCK_I2S0:
+		pClockCtrl = &pChipcHw->I2S0Clock;
+		break;
+	case chipcHw_CLOCK_RTBUS:
+		pClockCtrl = &pChipcHw->RTBUSClock;
+		pDependentClock = &pChipcHw->ACLKClock;
+		dependentClockType = NON_PLL_CLOCK;
+		break;
+	case chipcHw_CLOCK_APM100:
+		pClockCtrl = &pChipcHw->APM100Clock;
+		pDependentClock = &pChipcHw->APMClock;
+		vcoHz = vcoFreqPll2Hz;
+		desVcoHz = vcoFreqPll2Hz;
+		dependentClockType = PLL_CLOCK;
+		break;
+	case chipcHw_CLOCK_TSC:
+		pClockCtrl = &pChipcHw->TSCClock;
+		break;
+	case chipcHw_CLOCK_LED:
+		pClockCtrl = &pChipcHw->LEDClock;
+		break;
+	case chipcHw_CLOCK_I2S1:
+		pClockCtrl = &pChipcHw->I2S1Clock;
+		break;
+	}
+
+	if (pPLLReg) {
+		/* Select XTAL as bypass source */
+		reg32_modify_and(pPLLReg, ~chipcHw_REG_PLL_CLOCK_SOURCE_GPIO);
+		reg32_modify_or(pPLLReg, chipcHw_REG_PLL_CLOCK_BYPASS_SELECT);
+		/* For DDR settings use only the PLL divider clock */
+		if (pPLLReg == &pChipcHw->DDRClock) {
+			/* Set M1DIV for PLL1, which controls the DDR clock */
+			reg32_write(&pChipcHw->PLLDivider, (pChipcHw->PLLDivider & 0x00FFFFFF) | ((chipcHw_REG_PLL_DIVIDER_MDIV (desVcoHz, freq)) << 24));
+			/* Calculate expected frequency */
+			freq = chipcHw_divide(vcoHz, (((pChipcHw->PLLDivider & 0xFF000000) >> 24) ? ((pChipcHw->PLLDivider & 0xFF000000) >> 24) : 256));
+		} else {
+			/* From chip revision number B0, LCD clock is internally divided by 2 */
+			if ((pPLLReg == &pChipcHw->LCDClock) && (chipcHw_getChipRevisionNumber() != chipcHw_REV_NUMBER_A0)) {
+				desVcoHz >>= 1;
+				vcoHz >>= 1;
+			}
+			/* Set MDIV to change the frequency */
+			reg32_modify_and(pPLLReg, ~(chipcHw_REG_PLL_CLOCK_MDIV_MASK));
+			reg32_modify_or(pPLLReg, chipcHw_REG_PLL_DIVIDER_MDIV(desVcoHz, freq));
+			/* Calculate expected frequency */
+			freq = chipcHw_divide(vcoHz, ((*(pPLLReg) & chipcHw_REG_PLL_CLOCK_MDIV_MASK) ? (*(pPLLReg) & chipcHw_REG_PLL_CLOCK_MDIV_MASK) : 256));
+		}
+		/* Wait for for atleast 200ns as per the protocol to change frequency */
+		udelay(1);
+		/* Do not bypass */
+		reg32_modify_and(pPLLReg, ~chipcHw_REG_PLL_CLOCK_BYPASS_SELECT);
+		/* Return the configured frequency */
+		return freq;
+	} else if (pClockCtrl) {
+		uint32_t divider = 0;
+
+		/* Divider clock should not be bypassed  */
+		reg32_modify_and(pClockCtrl,
+				 ~chipcHw_REG_DIV_CLOCK_BYPASS_SELECT);
+
+		/* Identify the clock source */
+		if (pDependentClock) {
+			switch (dependentClockType) {
+			case PLL_CLOCK:
+				divider = chipcHw_divide(chipcHw_divide (desVcoHz, (*pDependentClock & chipcHw_REG_PLL_CLOCK_MDIV_MASK)), freq);
+				break;
+			case NON_PLL_CLOCK:
+				{
+					uint32_t sourceClock = 0;
+
+					if (pDependentClock == (uint32_t *) &pChipcHw->ACLKClock) {
+						sourceClock = chipcHw_getClockFrequency (chipcHw_CLOCK_BUS);
+					} else {
+						uint32_t div = *pDependentClock & chipcHw_REG_DIV_CLOCK_DIV_MASK;
+						sourceClock = chipcHw_divide (chipcHw_XTAL_FREQ_Hz, ((div) ? div : 256));
+					}
+					divider = chipcHw_divide(sourceClock, freq);
+				}
+				break;
+			}
+		} else {
+			divider = chipcHw_divide(chipcHw_XTAL_FREQ_Hz, freq);
+		}
+
+		if (divider) {
+			REG_LOCAL_IRQ_SAVE;
+			/* Set the divider to obtain the required frequency */
+			*pClockCtrl = (*pClockCtrl & (~chipcHw_REG_DIV_CLOCK_DIV_MASK)) | (((divider > 256) ? chipcHw_REG_DIV_CLOCK_DIV_256 : divider) & chipcHw_REG_DIV_CLOCK_DIV_MASK);
+			REG_LOCAL_IRQ_RESTORE;
+			return freq;
+		}
+	}
+
+	return 0;
+}
+
+EXPORT_SYMBOL(chipcHw_setClockFrequency);
+
+/****************************************************************************/
+/**
+*  @brief   Set VPM clock in sync with BUS clock for Chip Rev #A0
+*
+*  This function does the phase adjustment between VPM and BUS clock
+*
+*  @return >= 0 : On success (# of adjustment required)
+*            -1 : On failure
+*
+*/
+/****************************************************************************/
+static int vpmPhaseAlignA0(void)
+{
+	uint32_t phaseControl;
+	uint32_t phaseValue;
+	uint32_t prevPhaseComp;
+	int iter = 0;
+	int adjustCount = 0;
+	int count = 0;
+
+	for (iter = 0; (iter < MAX_PHASE_ALIGN_ATTEMPTS) && (adjustCount < MAX_PHASE_ADJUST_COUNT); iter++) {
+		phaseControl = (pChipcHw->VPMClock & chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK) >> chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT;
+		phaseValue = 0;
+		prevPhaseComp = 0;
+
+		/* Step 1: Look for falling PH_COMP transition */
+
+		/* Read the contents of VPM Clock resgister */
+		phaseValue = pChipcHw->VPMClock;
+		do {
+			/* Store previous value of phase comparator */
+			prevPhaseComp = phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP;
+			/* Change the value of PH_CTRL. */
+			reg32_write(&pChipcHw->VPMClock, (pChipcHw->VPMClock & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT));
+			/* Wait atleast 20 ns */
+			udelay(1);
+			/* Toggle the LOAD_CH after phase control is written. */
+			pChipcHw->VPMClock ^= chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE;
+			/* Read the contents of  VPM Clock resgister. */
+			phaseValue = pChipcHw->VPMClock;
+
+			if ((phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP) == 0x0) {
+				phaseControl = (0x3F & (phaseControl - 1));
+			} else {
+				/* Increment to the Phase count value for next write, if Phase is not stable. */
+				phaseControl = (0x3F & (phaseControl + 1));
+			}
+			/* Count number of adjustment made */
+			adjustCount++;
+		} while (((prevPhaseComp == (phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP)) ||	/* Look for a transition */
+			  ((phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP) != 0x0)) &&	/* Look for a falling edge */
+			 (adjustCount < MAX_PHASE_ADJUST_COUNT)	/* Do not exceed the limit while trying */
+		    );
+
+		if (adjustCount >= MAX_PHASE_ADJUST_COUNT) {
+			/* Failed to align VPM phase after MAX_PHASE_ADJUST_COUNT tries */
+			return -1;
+		}
+
+		/* Step 2: Keep moving forward to make sure falling PH_COMP transition was valid */
+
+		for (count = 0; (count < 5) && ((phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP) == 0); count++) {
+			phaseControl = (0x3F & (phaseControl + 1));
+			reg32_write(&pChipcHw->VPMClock, (pChipcHw->VPMClock & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT));
+			/* Wait atleast 20 ns */
+			udelay(1);
+			/* Toggle the LOAD_CH after phase control is written. */
+			pChipcHw->VPMClock ^= chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE;
+			phaseValue = pChipcHw->VPMClock;
+			/* Count number of adjustment made */
+			adjustCount++;
+		}
+
+		if (adjustCount >= MAX_PHASE_ADJUST_COUNT) {
+			/* Failed to align VPM phase after MAX_PHASE_ADJUST_COUNT tries */
+			return -1;
+		}
+
+		if (count != 5) {
+			/* Detected false transition */
+			continue;
+		}
+
+		/* Step 3: Keep moving backward to make sure falling PH_COMP transition was stable */
+
+		for (count = 0; (count < 3) && ((phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP) == 0); count++) {
+			phaseControl = (0x3F & (phaseControl - 1));
+			reg32_write(&pChipcHw->VPMClock, (pChipcHw->VPMClock & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT));
+			/* Wait atleast 20 ns */
+			udelay(1);
+			/* Toggle the LOAD_CH after phase control is written. */
+			pChipcHw->VPMClock ^= chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE;
+			phaseValue = pChipcHw->VPMClock;
+			/* Count number of adjustment made */
+			adjustCount++;
+		}
+
+		if (adjustCount >= MAX_PHASE_ADJUST_COUNT) {
+			/* Failed to align VPM phase after MAX_PHASE_ADJUST_COUNT tries */
+			return -1;
+		}
+
+		if (count != 3) {
+			/* Detected noisy transition */
+			continue;
+		}
+
+		/* Step 4: Keep moving backward before the original transition took place. */
+
+		for (count = 0; (count < 5); count++) {
+			phaseControl = (0x3F & (phaseControl - 1));
+			reg32_write(&pChipcHw->VPMClock, (pChipcHw->VPMClock & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT));
+			/* Wait atleast 20 ns */
+			udelay(1);
+			/* Toggle the LOAD_CH after phase control is written. */
+			pChipcHw->VPMClock ^= chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE;
+			phaseValue = pChipcHw->VPMClock;
+			/* Count number of adjustment made */
+			adjustCount++;
+		}
+
+		if (adjustCount >= MAX_PHASE_ADJUST_COUNT) {
+			/* Failed to align VPM phase after MAX_PHASE_ADJUST_COUNT tries */
+			return -1;
+		}
+
+		if ((phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP) == 0) {
+			/* Detected false transition */
+			continue;
+		}
+
+		/* Step 5: Re discover the valid transition */
+
+		do {
+			/* Store previous value of phase comparator */
+			prevPhaseComp = phaseValue;
+			/* Change the value of PH_CTRL. */
+			reg32_write(&pChipcHw->VPMClock, (pChipcHw->VPMClock & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT));
+			/* Wait atleast 20 ns */
+			udelay(1);
+			/* Toggle the LOAD_CH after phase control is written. */
+			pChipcHw->VPMClock ^=
+			    chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE;
+			/* Read the contents of  VPM Clock resgister. */
+			phaseValue = pChipcHw->VPMClock;
+
+			if ((phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP) == 0x0) {
+				phaseControl = (0x3F & (phaseControl - 1));
+			} else {
+				/* Increment to the Phase count value for next write, if Phase is not stable. */
+				phaseControl = (0x3F & (phaseControl + 1));
+			}
+
+			/* Count number of adjustment made */
+			adjustCount++;
+		} while (((prevPhaseComp == (phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP)) || ((phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP) != 0x0)) && (adjustCount < MAX_PHASE_ADJUST_COUNT));
+
+		if (adjustCount >= MAX_PHASE_ADJUST_COUNT) {
+			/* Failed to align VPM phase after MAX_PHASE_ADJUST_COUNT tries  */
+			return -1;
+		} else {
+			/* Valid phase must have detected */
+			break;
+		}
+	}
+
+	/* For VPM Phase should be perfectly aligned. */
+	phaseControl = (((pChipcHw->VPMClock >> chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT) - 1) & 0x3F);
+	{
+		REG_LOCAL_IRQ_SAVE;
+
+		pChipcHw->VPMClock = (pChipcHw->VPMClock & ~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT);
+		/* Load new phase value */
+		pChipcHw->VPMClock ^= chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE;
+
+		REG_LOCAL_IRQ_RESTORE;
+	}
+	/* Return the status */
+	return (int)adjustCount;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Set VPM clock in sync with BUS clock
+*
+*  This function does the phase adjustment between VPM and BUS clock
+*
+*  @return >= 0 : On success (# of adjustment required)
+*            -1 : On failure
+*
+*/
+/****************************************************************************/
+int chipcHw_vpmPhaseAlign(void)
+{
+
+	if (chipcHw_getChipRevisionNumber() == chipcHw_REV_NUMBER_A0) {
+		return vpmPhaseAlignA0();
+	} else {
+		uint32_t phaseControl = chipcHw_getVpmPhaseControl();
+		uint32_t phaseValue = 0;
+		int adjustCount = 0;
+
+		/* Disable VPM access */
+		pChipcHw->Spare1 &= ~chipcHw_REG_SPARE1_VPM_BUS_ACCESS_ENABLE;
+		/* Disable HW VPM phase alignment  */
+		chipcHw_vpmHwPhaseAlignDisable();
+		/* Enable SW VPM phase alignment  */
+		chipcHw_vpmSwPhaseAlignEnable();
+		/* Adjust VPM phase */
+		while (adjustCount < MAX_PHASE_ADJUST_COUNT) {
+			phaseValue = chipcHw_getVpmHwPhaseAlignStatus();
+
+			/* Adjust phase control value */
+			if (phaseValue > 0xF) {
+				/* Increment phase control value */
+				phaseControl++;
+			} else if (phaseValue < 0xF) {
+				/* Decrement phase control value */
+				phaseControl--;
+			} else {
+				/* Enable VPM access */
+				pChipcHw->Spare1 |= chipcHw_REG_SPARE1_VPM_BUS_ACCESS_ENABLE;
+				/* Return adjust count */
+				return adjustCount;
+			}
+			/* Change the value of PH_CTRL. */
+			reg32_write(&pChipcHw->VPMClock, (pChipcHw->VPMClock & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT));
+			/* Wait atleast 20 ns */
+			udelay(1);
+			/* Toggle the LOAD_CH after phase control is written. */
+			pChipcHw->VPMClock ^= chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE;
+			/* Count adjustment */
+			adjustCount++;
+		}
+	}
+
+	/* Disable VPM access */
+	pChipcHw->Spare1 &= ~chipcHw_REG_SPARE1_VPM_BUS_ACCESS_ENABLE;
+	return -1;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Local Divide function
+*
+*  This function does the divide
+*
+*  @return divide value
+*
+*/
+/****************************************************************************/
+static int chipcHw_divide(int num, int denom)
+{
+	int r;
+	int t = 1;
+
+	/* Shift denom and t up to the largest value to optimize algorithm */
+	/* t contains the units of each divide */
+	while ((denom & 0x40000000) == 0) {	/* fails if denom=0 */
+		denom = denom << 1;
+		t = t << 1;
+	}
+
+	/* Intialize the result */
+	r = 0;
+
+	do {
+		/* Determine if there exists a positive remainder */
+		if ((num - denom) >= 0) {
+			/* Accumlate t to the result and calculate a new remainder */
+			num = num - denom;
+			r = r + t;
+		}
+		/* Continue to shift denom and shift t down to 0 */
+		denom = denom >> 1;
+		t = t >> 1;
+	} while (t != 0);
+
+	return r;
+}
diff --git a/arch/arm/mach-bcmring/csp/chipc/chipcHw_init.c b/arch/arm/mach-bcmring/csp/chipc/chipcHw_init.c
new file mode 100644
index 000000000000..367df75d4bb3
--- /dev/null
+++ b/arch/arm/mach-bcmring/csp/chipc/chipcHw_init.c
@@ -0,0 +1,293 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*  @file    chipcHw_init.c
+*
+*  @brief   Low level CHIPC PLL configuration functions
+*
+*  @note
+*
+*   These routines provide basic PLL controlling functionality only.
+*/
+/****************************************************************************/
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#include <csp/errno.h>
+#include <csp/stdint.h>
+#include <csp/module.h>
+
+#include <mach/csp/chipcHw_def.h>
+#include <mach/csp/chipcHw_inline.h>
+
+#include <csp/reg.h>
+#include <csp/delay.h>
+/* ---- Private Constants and Types --------------------------------------- */
+
+/*
+    Calculation for NDIV_i to obtain VCO frequency
+    -----------------------------------------------
+
+	Freq_vco = Freq_ref * (P2 / P1) * (PLL_NDIV_i + PLL_NDIV_f)
+	for Freq_vco = VCO_FREQ_MHz
+		Freq_ref = chipcHw_XTAL_FREQ_Hz
+		PLL_P1 = PLL_P2 = 1
+		and
+		PLL_NDIV_f = 0
+
+	We get:
+		PLL_NDIV_i = Freq_vco / Freq_ref = VCO_FREQ_MHz / chipcHw_XTAL_FREQ_Hz
+
+    Calculation for PLL MDIV to obtain frequency Freq_x for channel x
+    -----------------------------------------------------------------
+		Freq_x = chipcHw_XTAL_FREQ_Hz * PLL_NDIV_i / PLL_MDIV_x = VCO_FREQ_MHz / PLL_MDIV_x
+
+		PLL_MDIV_x = VCO_FREQ_MHz / Freq_x
+*/
+
+/* ---- Private Variables ------------------------------------------------- */
+/****************************************************************************/
+/**
+*  @brief  Initializes the PLL2
+*
+*  This function initializes the PLL2
+*
+*/
+/****************************************************************************/
+void chipcHw_pll2Enable(uint32_t vcoFreqHz)
+{
+	uint32_t pllPreDivider2 = 0;
+
+	{
+		REG_LOCAL_IRQ_SAVE;
+		pChipcHw->PLLConfig2 =
+		    chipcHw_REG_PLL_CONFIG_D_RESET |
+		    chipcHw_REG_PLL_CONFIG_A_RESET;
+
+		pllPreDivider2 = chipcHw_REG_PLL_PREDIVIDER_POWER_DOWN |
+		    chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER |
+		    (chipcHw_REG_PLL_PREDIVIDER_NDIV_i(vcoFreqHz) <<
+		     chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT) |
+		    (chipcHw_REG_PLL_PREDIVIDER_P1 <<
+		     chipcHw_REG_PLL_PREDIVIDER_P1_SHIFT) |
+		    (chipcHw_REG_PLL_PREDIVIDER_P2 <<
+		     chipcHw_REG_PLL_PREDIVIDER_P2_SHIFT);
+
+		/* Enable CHIPC registers to control the PLL */
+		pChipcHw->PLLStatus |= chipcHw_REG_PLL_STATUS_CONTROL_ENABLE;
+
+		/* Set pre divider to get desired VCO frequency */
+		pChipcHw->PLLPreDivider2 = pllPreDivider2;
+		/* Set NDIV Frac */
+		pChipcHw->PLLDivider2 = chipcHw_REG_PLL_DIVIDER_NDIV_f;
+
+		/* This has to be removed once the default values are fixed for PLL2. */
+		pChipcHw->PLLControl12 = 0x38000700;
+		pChipcHw->PLLControl22 = 0x00000015;
+
+		/* Reset PLL2 */
+		if (vcoFreqHz > chipcHw_REG_PLL_CONFIG_VCO_SPLIT_FREQ) {
+			pChipcHw->PLLConfig2 = chipcHw_REG_PLL_CONFIG_D_RESET |
+			    chipcHw_REG_PLL_CONFIG_A_RESET |
+			    chipcHw_REG_PLL_CONFIG_VCO_1601_3200 |
+			    chipcHw_REG_PLL_CONFIG_POWER_DOWN;
+		} else {
+			pChipcHw->PLLConfig2 = chipcHw_REG_PLL_CONFIG_D_RESET |
+			    chipcHw_REG_PLL_CONFIG_A_RESET |
+			    chipcHw_REG_PLL_CONFIG_VCO_800_1600 |
+			    chipcHw_REG_PLL_CONFIG_POWER_DOWN;
+		}
+		REG_LOCAL_IRQ_RESTORE;
+	}
+
+	/* Insert certain amount of delay before deasserting ARESET. */
+	udelay(1);
+
+	{
+		REG_LOCAL_IRQ_SAVE;
+		/* Remove analog reset and Power on the PLL */
+		pChipcHw->PLLConfig2 &=
+		    ~(chipcHw_REG_PLL_CONFIG_A_RESET |
+		      chipcHw_REG_PLL_CONFIG_POWER_DOWN);
+
+		REG_LOCAL_IRQ_RESTORE;
+
+	}
+
+	/* Wait until PLL is locked */
+	while (!(pChipcHw->PLLStatus2 & chipcHw_REG_PLL_STATUS_LOCKED))
+		;
+
+	{
+		REG_LOCAL_IRQ_SAVE;
+		/* Remove digital reset */
+		pChipcHw->PLLConfig2 &= ~chipcHw_REG_PLL_CONFIG_D_RESET;
+
+		REG_LOCAL_IRQ_RESTORE;
+	}
+}
+
+EXPORT_SYMBOL(chipcHw_pll2Enable);
+
+/****************************************************************************/
+/**
+*  @brief  Initializes the PLL1
+*
+*  This function initializes the PLL1
+*
+*/
+/****************************************************************************/
+void chipcHw_pll1Enable(uint32_t vcoFreqHz, chipcHw_SPREAD_SPECTRUM_e ssSupport)
+{
+	uint32_t pllPreDivider = 0;
+
+	{
+		REG_LOCAL_IRQ_SAVE;
+
+		pChipcHw->PLLConfig =
+		    chipcHw_REG_PLL_CONFIG_D_RESET |
+		    chipcHw_REG_PLL_CONFIG_A_RESET;
+		/* Setting VCO frequency */
+		if (ssSupport == chipcHw_SPREAD_SPECTRUM_ALLOW) {
+			pllPreDivider =
+			    chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASH_1_8 |
+			    ((chipcHw_REG_PLL_PREDIVIDER_NDIV_i(vcoFreqHz) -
+			      1) << chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT) |
+			    (chipcHw_REG_PLL_PREDIVIDER_P1 <<
+			     chipcHw_REG_PLL_PREDIVIDER_P1_SHIFT) |
+			    (chipcHw_REG_PLL_PREDIVIDER_P2 <<
+			     chipcHw_REG_PLL_PREDIVIDER_P2_SHIFT);
+		} else {
+			pllPreDivider = chipcHw_REG_PLL_PREDIVIDER_POWER_DOWN |
+			    chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER |
+			    (chipcHw_REG_PLL_PREDIVIDER_NDIV_i(vcoFreqHz) <<
+			     chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT) |
+			    (chipcHw_REG_PLL_PREDIVIDER_P1 <<
+			     chipcHw_REG_PLL_PREDIVIDER_P1_SHIFT) |
+			    (chipcHw_REG_PLL_PREDIVIDER_P2 <<
+			     chipcHw_REG_PLL_PREDIVIDER_P2_SHIFT);
+		}
+
+		/* Enable CHIPC registers to control the PLL */
+		pChipcHw->PLLStatus |= chipcHw_REG_PLL_STATUS_CONTROL_ENABLE;
+
+		/* Set pre divider to get desired VCO frequency */
+		pChipcHw->PLLPreDivider = pllPreDivider;
+		/* Set NDIV Frac */
+		if (ssSupport == chipcHw_SPREAD_SPECTRUM_ALLOW) {
+			pChipcHw->PLLDivider = chipcHw_REG_PLL_DIVIDER_M1DIV |
+			    chipcHw_REG_PLL_DIVIDER_NDIV_f_SS;
+		} else {
+			pChipcHw->PLLDivider = chipcHw_REG_PLL_DIVIDER_M1DIV |
+			    chipcHw_REG_PLL_DIVIDER_NDIV_f;
+		}
+
+		/* Reset PLL1 */
+		if (vcoFreqHz > chipcHw_REG_PLL_CONFIG_VCO_SPLIT_FREQ) {
+			pChipcHw->PLLConfig = chipcHw_REG_PLL_CONFIG_D_RESET |
+			    chipcHw_REG_PLL_CONFIG_A_RESET |
+			    chipcHw_REG_PLL_CONFIG_VCO_1601_3200 |
+			    chipcHw_REG_PLL_CONFIG_POWER_DOWN;
+		} else {
+			pChipcHw->PLLConfig = chipcHw_REG_PLL_CONFIG_D_RESET |
+			    chipcHw_REG_PLL_CONFIG_A_RESET |
+			    chipcHw_REG_PLL_CONFIG_VCO_800_1600 |
+			    chipcHw_REG_PLL_CONFIG_POWER_DOWN;
+		}
+
+		REG_LOCAL_IRQ_RESTORE;
+
+		/* Insert certain amount of delay before deasserting ARESET. */
+		udelay(1);
+
+		{
+			REG_LOCAL_IRQ_SAVE;
+			/* Remove analog reset and Power on the PLL */
+			pChipcHw->PLLConfig &=
+			    ~(chipcHw_REG_PLL_CONFIG_A_RESET |
+			      chipcHw_REG_PLL_CONFIG_POWER_DOWN);
+			REG_LOCAL_IRQ_RESTORE;
+		}
+
+		/* Wait until PLL is locked */
+		while (!(pChipcHw->PLLStatus & chipcHw_REG_PLL_STATUS_LOCKED)
+		       || !(pChipcHw->
+			    PLLStatus2 & chipcHw_REG_PLL_STATUS_LOCKED))
+			;
+
+		/* Remove digital reset */
+		{
+			REG_LOCAL_IRQ_SAVE;
+			pChipcHw->PLLConfig &= ~chipcHw_REG_PLL_CONFIG_D_RESET;
+			REG_LOCAL_IRQ_RESTORE;
+		}
+	}
+}
+
+EXPORT_SYMBOL(chipcHw_pll1Enable);
+
+/****************************************************************************/
+/**
+*  @brief  Initializes the chipc module
+*
+*  This function initializes the PLLs and core system clocks
+*
+*/
+/****************************************************************************/
+
+void chipcHw_Init(chipcHw_INIT_PARAM_t *initParam	/*  [ IN ] Misc chip initialization parameter */
+    ) {
+#if !(defined(__KERNEL__) && !defined(STANDALONE))
+	delay_init();
+#endif
+
+	/* Do not program PLL, when warm reset */
+	if (!(chipcHw_getStickyBits() & chipcHw_REG_STICKY_CHIP_WARM_RESET)) {
+		chipcHw_pll1Enable(initParam->pllVcoFreqHz,
+				   initParam->ssSupport);
+		chipcHw_pll2Enable(initParam->pll2VcoFreqHz);
+	} else {
+		/* Clear sticky bits */
+		chipcHw_clearStickyBits(chipcHw_REG_STICKY_CHIP_WARM_RESET);
+	}
+	/* Clear sticky bits */
+	chipcHw_clearStickyBits(chipcHw_REG_STICKY_CHIP_SOFT_RESET);
+
+	/* Before configuring the ARM clock, atleast we need to make sure BUS clock maintains the proper ratio with ARM clock */
+	pChipcHw->ACLKClock =
+	    (pChipcHw->
+	     ACLKClock & ~chipcHw_REG_ACLKClock_CLK_DIV_MASK) | (initParam->
+								 armBusRatio &
+								 chipcHw_REG_ACLKClock_CLK_DIV_MASK);
+
+	/* Set various core component frequencies. The order in which this is done is important for some. */
+	/* The RTBUS (DDR PHY) is derived from the BUS, and the BUS from the ARM, and VPM needs to know BUS */
+	/* frequency to find its ratio with the BUS.  Hence we must set the ARM first, followed by the BUS,  */
+	/* then VPM and RTBUS. */
+
+	chipcHw_setClockFrequency(chipcHw_CLOCK_ARM,
+				  initParam->busClockFreqHz *
+				  initParam->armBusRatio);
+	chipcHw_setClockFrequency(chipcHw_CLOCK_BUS, initParam->busClockFreqHz);
+	chipcHw_setClockFrequency(chipcHw_CLOCK_VPM,
+				  initParam->busClockFreqHz *
+				  initParam->vpmBusRatio);
+	chipcHw_setClockFrequency(chipcHw_CLOCK_DDR,
+				  initParam->busClockFreqHz *
+				  initParam->ddrBusRatio);
+	chipcHw_setClockFrequency(chipcHw_CLOCK_RTBUS,
+				  initParam->busClockFreqHz / 2);
+}
diff --git a/arch/arm/mach-bcmring/csp/chipc/chipcHw_reset.c b/arch/arm/mach-bcmring/csp/chipc/chipcHw_reset.c
new file mode 100644
index 000000000000..2671d8896bbb
--- /dev/null
+++ b/arch/arm/mach-bcmring/csp/chipc/chipcHw_reset.c
@@ -0,0 +1,124 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/* ---- Include Files ---------------------------------------------------- */
+#include <csp/stdint.h>
+#include <mach/csp/chipcHw_def.h>
+#include <mach/csp/chipcHw_inline.h>
+#include <csp/intcHw.h>
+#include <csp/cache.h>
+
+/* ---- Private Constants and Types --------------------------------------- */
+/* ---- Private Variables ------------------------------------------------- */
+void chipcHw_reset_run_from_aram(void);
+
+typedef void (*RUNFUNC) (void);
+
+/****************************************************************************/
+/**
+*  @brief   warmReset
+*
+*  @note warmReset configures the clocks which are not reset back to the state
+*   required to execute on reset.  To do so we need to copy the code into internal
+*   memory to change the ARM clock while we are not executing from DDR.
+*/
+/****************************************************************************/
+void chipcHw_reset(uint32_t mask)
+{
+	int i = 0;
+	RUNFUNC runFunc = (RUNFUNC) (unsigned long)MM_ADDR_IO_ARAM;
+
+	/* Disable all interrupts */
+	intcHw_irq_disable(INTCHW_INTC0, 0xffffffff);
+	intcHw_irq_disable(INTCHW_INTC1, 0xffffffff);
+	intcHw_irq_disable(INTCHW_SINTC, 0xffffffff);
+
+	{
+		REG_LOCAL_IRQ_SAVE;
+		if (mask & chipcHw_REG_SOFT_RESET_CHIP_SOFT) {
+			chipcHw_softReset(chipcHw_REG_SOFT_RESET_CHIP_SOFT);
+		}
+		/* Bypass the PLL clocks before reboot */
+		pChipcHw->UARTClock |= chipcHw_REG_PLL_CLOCK_BYPASS_SELECT;
+		pChipcHw->SPIClock |= chipcHw_REG_PLL_CLOCK_BYPASS_SELECT;
+
+		/* Copy the chipcHw_warmReset_run_from_aram function into ARAM */
+		do {
+			((uint32_t *) MM_IO_BASE_ARAM)[i] =
+			    ((uint32_t *) &chipcHw_reset_run_from_aram)[i];
+			i++;
+		} while (((uint32_t *) MM_IO_BASE_ARAM)[i - 1] != 0xe1a0f00f);	/* 0xe1a0f00f == asm ("mov r15, r15"); */
+
+		CSP_CACHE_FLUSH_ALL;
+
+		/* run the function from ARAM */
+		runFunc();
+
+		/* Code will never get here, but include it to balance REG_LOCAL_IRQ_SAVE above */
+		REG_LOCAL_IRQ_RESTORE;
+	}
+}
+
+/* This function must run from internal memory */
+void chipcHw_reset_run_from_aram(void)
+{
+/* Make sure, pipeline is filled with instructions coming from ARAM */
+__asm (" nop                                                            \n\t"
+		" nop                                                            \n\t"
+#if defined(__KERNEL__) && !defined(STANDALONE)
+		" MRC      p15,#0x0,r0,c1,c0,#0                                  \n\t"
+		" BIC      r0,r0,#0xd                                            \n\t"
+		" MCR      p15,#0x0,r0,c1,c0,#0                                  \n\t"
+		" nop                                                            \n\t"
+		" nop                                                            \n\t"
+		" nop                                                            \n\t"
+		" nop                                                            \n\t"
+		" nop                                                            \n\t"
+		" nop                                                            \n\t"
+#endif
+		" nop                                                            \n\t"
+		" nop                                                            \n\t"
+/* Bypass the ARM clock and switch to XTAL clock */
+		" MOV      r2,#0x80000000                                        \n\t"
+		" LDR      r3,[r2,#8]                                            \n\t"
+		" ORR      r3,r3,#0x20000                                        \n\t"
+		" STR      r3,[r2,#8]                                            \n\t"
+
+		" nop                                                            \n\t"
+		" nop                                                            \n\t"
+		" nop                                                            \n\t"
+		" nop                                                            \n\t"
+		" nop                                                            \n\t"
+		" nop                                                            \n\t"
+		" nop                                                            \n\t"
+		" nop                                                            \n\t"
+		" nop                                                            \n\t"
+		" nop                                                            \n\t"
+		" nop                                                            \n\t"
+		" nop                                                            \n\t"
+		" nop                                                            \n\t"
+		" nop                                                            \n\t"
+		" nop                                                            \n\t"
+		" nop                                                            \n\t"
+		" nop                                                            \n\t"
+		" nop                                                            \n\t"
+		" nop                                                            \n\t"
+		" nop                                                            \n\t"
+/* Issue reset */
+		" MOV      r3,#0x2                                               \n\t"
+		" STR      r3,[r2,#0x80]                                         \n\t"
+/* End here */
+		" MOV      pc,pc                                                 \n\t");
+/* 0xe1a0f00f ==  asm ("mov r15, r15"); */
+}
diff --git a/arch/arm/mach-bcmring/csp/chipc/chipcHw_str.c b/arch/arm/mach-bcmring/csp/chipc/chipcHw_str.c
new file mode 100644
index 000000000000..54ad964fe94c
--- /dev/null
+++ b/arch/arm/mach-bcmring/csp/chipc/chipcHw_str.c
@@ -0,0 +1,64 @@
+/*****************************************************************************
+* Copyright 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+/****************************************************************************/
+/**
+*  @file    chipcHw_str.c
+*
+*  @brief   Contains strings which are useful to linux and csp
+*
+*  @note
+*/
+/****************************************************************************/
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#include <mach/csp/chipcHw_inline.h>
+
+/* ---- Private Constants and Types --------------------------------------- */
+
+static const char *gMuxStr[] = {
+	"GPIO",			/* 0 */
+	"KeyPad",		/* 1 */
+	"I2C-Host",		/* 2 */
+	"SPI",			/* 3 */
+	"Uart",			/* 4 */
+	"LED-Mtx-P",		/* 5 */
+	"LED-Mtx-S",		/* 6 */
+	"SDIO-0",		/* 7 */
+	"SDIO-1",		/* 8 */
+	"PCM",			/* 9 */
+	"I2S",			/* 10 */
+	"ETM",			/* 11 */
+	"Debug",		/* 12 */
+	"Misc",			/* 13 */
+	"0xE",			/* 14 */
+	"0xF",			/* 15 */
+};
+
+/****************************************************************************/
+/**
+*  @brief   Retrieves a string representation of the mux setting for a pin.
+*
+*  @return  Pointer to a character string.
+*/
+/****************************************************************************/
+
+const char *chipcHw_getGpioPinFunctionStr(int pin)
+{
+	if ((pin < 0) || (pin >= chipcHw_GPIO_COUNT)) {
+		return "";
+	}
+
+	return gMuxStr[chipcHw_getGpioPinFunction(pin)];
+}
diff --git a/arch/arm/mach-bcmring/csp/dmac/Makefile b/arch/arm/mach-bcmring/csp/dmac/Makefile
new file mode 100644
index 000000000000..fb1104fe56b2
--- /dev/null
+++ b/arch/arm/mach-bcmring/csp/dmac/Makefile
@@ -0,0 +1 @@
+obj-y += dmacHw.o dmacHw_extra.o
\ No newline at end of file
diff --git a/arch/arm/mach-bcmring/csp/dmac/dmacHw.c b/arch/arm/mach-bcmring/csp/dmac/dmacHw.c
new file mode 100644
index 000000000000..7b9bac2d79a5
--- /dev/null
+++ b/arch/arm/mach-bcmring/csp/dmac/dmacHw.c
@@ -0,0 +1,917 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*  @file    dmacHw.c
+*
+*  @brief   Low level DMA controller driver routines
+*
+*  @note
+*
+*   These routines provide basic DMA functionality only.
+*/
+/****************************************************************************/
+
+/* ---- Include Files ---------------------------------------------------- */
+#include <csp/stdint.h>
+#include <csp/string.h>
+#include <stddef.h>
+
+#include <csp/dmacHw.h>
+#include <mach/csp/dmacHw_reg.h>
+#include <mach/csp/dmacHw_priv.h>
+#include <mach/csp/chipcHw_inline.h>
+
+/* ---- External Function Prototypes ------------------------------------- */
+
+/* Allocate DMA control blocks */
+dmacHw_CBLK_t dmacHw_gCblk[dmacHw_MAX_CHANNEL_COUNT];
+
+uint32_t dmaChannelCount_0 = dmacHw_MAX_CHANNEL_COUNT / 2;
+uint32_t dmaChannelCount_1 = dmacHw_MAX_CHANNEL_COUNT / 2;
+
+/****************************************************************************/
+/**
+*  @brief   Get maximum FIFO for a DMA channel
+*
+*  @return  Maximum allowable FIFO size
+*
+*
+*/
+/****************************************************************************/
+static uint32_t GetFifoSize(dmacHw_HANDLE_t handle	/*   [ IN ] DMA Channel handle */
+    ) {
+	uint32_t val = 0;
+	dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+	dmacHw_MISC_t *pMiscReg =
+	    (dmacHw_MISC_t *) dmacHw_REG_MISC_BASE(pCblk->module);
+
+	switch (pCblk->channel) {
+	case 0:
+		val = (pMiscReg->CompParm2.lo & 0x70000000) >> 28;
+		break;
+	case 1:
+		val = (pMiscReg->CompParm3.hi & 0x70000000) >> 28;
+		break;
+	case 2:
+		val = (pMiscReg->CompParm3.lo & 0x70000000) >> 28;
+		break;
+	case 3:
+		val = (pMiscReg->CompParm4.hi & 0x70000000) >> 28;
+		break;
+	case 4:
+		val = (pMiscReg->CompParm4.lo & 0x70000000) >> 28;
+		break;
+	case 5:
+		val = (pMiscReg->CompParm5.hi & 0x70000000) >> 28;
+		break;
+	case 6:
+		val = (pMiscReg->CompParm5.lo & 0x70000000) >> 28;
+		break;
+	case 7:
+		val = (pMiscReg->CompParm6.hi & 0x70000000) >> 28;
+		break;
+	}
+
+	if (val <= 0x4) {
+		return 8 << val;
+	} else {
+		dmacHw_ASSERT(0);
+	}
+	return 0;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Program channel register to initiate transfer
+*
+*  @return  void
+*
+*
+*  @note
+*     - Descriptor buffer MUST ALWAYS be flushed before calling this function
+*     - This function should also be called from ISR to program the channel with
+*       pending descriptors
+*/
+/****************************************************************************/
+void dmacHw_initiateTransfer(dmacHw_HANDLE_t handle,	/*   [ IN ] DMA Channel handle */
+			     dmacHw_CONFIG_t *pConfig,	/*   [ IN ] Configuration settings */
+			     void *pDescriptor	/*   [ IN ] Descriptor buffer */
+    ) {
+	dmacHw_DESC_RING_t *pRing;
+	dmacHw_DESC_t *pProg;
+	dmacHw_CBLK_t *pCblk;
+
+	pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+	pRing = dmacHw_GET_DESC_RING(pDescriptor);
+
+	if (CHANNEL_BUSY(pCblk->module, pCblk->channel)) {
+		/* Not safe yet to program the channel */
+		return;
+	}
+
+	if (pCblk->varDataStarted) {
+		if (pCblk->descUpdated) {
+			pCblk->descUpdated = 0;
+			pProg =
+			    (dmacHw_DESC_t *) ((uint32_t)
+					       dmacHw_REG_LLP(pCblk->module,
+							      pCblk->channel) +
+					       pRing->virt2PhyOffset);
+
+			/* Load descriptor if not loaded */
+			if (!(pProg->ctl.hi & dmacHw_REG_CTL_DONE)) {
+				dmacHw_SET_SAR(pCblk->module, pCblk->channel,
+					       pProg->sar);
+				dmacHw_SET_DAR(pCblk->module, pCblk->channel,
+					       pProg->dar);
+				dmacHw_REG_CTL_LO(pCblk->module,
+						  pCblk->channel) =
+				    pProg->ctl.lo;
+				dmacHw_REG_CTL_HI(pCblk->module,
+						  pCblk->channel) =
+				    pProg->ctl.hi;
+			} else if (pProg == (dmacHw_DESC_t *) pRing->pEnd->llp) {
+				/* Return as end descriptor is processed */
+				return;
+			} else {
+				dmacHw_ASSERT(0);
+			}
+		} else {
+			return;
+		}
+	} else {
+		if (pConfig->transferMode == dmacHw_TRANSFER_MODE_PERIODIC) {
+			/* Do not make a single chain, rather process one descriptor at a time */
+			pProg = pRing->pHead;
+			/* Point to the next descriptor for next iteration */
+			dmacHw_NEXT_DESC(pRing, pHead);
+		} else {
+			/* Return if no more pending descriptor */
+			if (pRing->pEnd == NULL) {
+				return;
+			}
+
+			pProg = pRing->pProg;
+			if (pConfig->transferMode ==
+			    dmacHw_TRANSFER_MODE_CONTINUOUS) {
+				/* Make sure a complete ring can be formed */
+				dmacHw_ASSERT((dmacHw_DESC_t *) pRing->pEnd->
+					      llp == pRing->pProg);
+				/* Make sure pProg pointing to the pHead */
+				dmacHw_ASSERT((dmacHw_DESC_t *) pRing->pProg ==
+					      pRing->pHead);
+				/* Make a complete ring */
+				do {
+					pRing->pProg->ctl.lo |=
+					    (dmacHw_REG_CTL_LLP_DST_EN |
+					     dmacHw_REG_CTL_LLP_SRC_EN);
+					pRing->pProg =
+					    (dmacHw_DESC_t *) pRing->pProg->llp;
+				} while (pRing->pProg != pRing->pHead);
+			} else {
+				/* Make a single long chain */
+				while (pRing->pProg != pRing->pEnd) {
+					pRing->pProg->ctl.lo |=
+					    (dmacHw_REG_CTL_LLP_DST_EN |
+					     dmacHw_REG_CTL_LLP_SRC_EN);
+					pRing->pProg =
+					    (dmacHw_DESC_t *) pRing->pProg->llp;
+				}
+			}
+		}
+
+		/* Program the channel registers */
+		dmacHw_SET_SAR(pCblk->module, pCblk->channel, pProg->sar);
+		dmacHw_SET_DAR(pCblk->module, pCblk->channel, pProg->dar);
+		dmacHw_SET_LLP(pCblk->module, pCblk->channel,
+			       (uint32_t) pProg - pRing->virt2PhyOffset);
+		dmacHw_REG_CTL_LO(pCblk->module, pCblk->channel) =
+		    pProg->ctl.lo;
+		dmacHw_REG_CTL_HI(pCblk->module, pCblk->channel) =
+		    pProg->ctl.hi;
+		if (pRing->pEnd) {
+			/* Remember the descriptor to use next */
+			pRing->pProg = (dmacHw_DESC_t *) pRing->pEnd->llp;
+		}
+		/* Indicate no more pending descriptor  */
+		pRing->pEnd = (dmacHw_DESC_t *) NULL;
+	}
+	/* Start DMA operation */
+	dmacHw_DMA_START(pCblk->module, pCblk->channel);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Initializes DMA
+*
+*  This function initializes DMA CSP driver
+*
+*  @note
+*     Must be called before using any DMA channel
+*/
+/****************************************************************************/
+void dmacHw_initDma(void)
+{
+
+	uint32_t i = 0;
+
+	dmaChannelCount_0 = dmacHw_GET_NUM_CHANNEL(0);
+	dmaChannelCount_1 = dmacHw_GET_NUM_CHANNEL(1);
+
+	/* Enable access to the DMA block */
+	chipcHw_busInterfaceClockEnable(chipcHw_REG_BUS_CLOCK_DMAC0);
+	chipcHw_busInterfaceClockEnable(chipcHw_REG_BUS_CLOCK_DMAC1);
+
+	if ((dmaChannelCount_0 + dmaChannelCount_1) > dmacHw_MAX_CHANNEL_COUNT) {
+		dmacHw_ASSERT(0);
+	}
+
+	memset((void *)dmacHw_gCblk, 0,
+	       sizeof(dmacHw_CBLK_t) * (dmaChannelCount_0 + dmaChannelCount_1));
+	for (i = 0; i < dmaChannelCount_0; i++) {
+		dmacHw_gCblk[i].module = 0;
+		dmacHw_gCblk[i].channel = i;
+	}
+	for (i = 0; i < dmaChannelCount_1; i++) {
+		dmacHw_gCblk[i + dmaChannelCount_0].module = 1;
+		dmacHw_gCblk[i + dmaChannelCount_0].channel = i;
+	}
+}
+
+/****************************************************************************/
+/**
+*  @brief   Exit function for  DMA
+*
+*  This function isolates DMA from the system
+*
+*/
+/****************************************************************************/
+void dmacHw_exitDma(void)
+{
+	/* Disable access to the DMA block */
+	chipcHw_busInterfaceClockDisable(chipcHw_REG_BUS_CLOCK_DMAC0);
+	chipcHw_busInterfaceClockDisable(chipcHw_REG_BUS_CLOCK_DMAC1);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Gets a handle to a DMA channel
+*
+*  This function returns a handle, representing a control block of a particular DMA channel
+*
+*  @return  -1       - On Failure
+*            handle  - On Success, representing a channel control block
+*
+*  @note
+*     None  Channel ID must be created using "dmacHw_MAKE_CHANNEL_ID" macro
+*/
+/****************************************************************************/
+dmacHw_HANDLE_t dmacHw_getChannelHandle(dmacHw_ID_t channelId	/* [ IN ] DMA Channel Id */
+    ) {
+	int idx;
+
+	switch ((channelId >> 8)) {
+	case 0:
+		dmacHw_ASSERT((channelId & 0xff) < dmaChannelCount_0);
+		idx = (channelId & 0xff);
+		break;
+	case 1:
+		dmacHw_ASSERT((channelId & 0xff) < dmaChannelCount_1);
+		idx = dmaChannelCount_0 + (channelId & 0xff);
+		break;
+	default:
+		dmacHw_ASSERT(0);
+		return (dmacHw_HANDLE_t) -1;
+	}
+
+	return dmacHw_CBLK_TO_HANDLE(&dmacHw_gCblk[idx]);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Initializes a DMA channel for use
+*
+*  This function initializes and resets a DMA channel for use
+*
+*  @return  -1     - On Failure
+*            0     - On Success
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+int dmacHw_initChannel(dmacHw_HANDLE_t handle	/*   [ IN ] DMA Channel handle */
+    ) {
+	dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+	int module = pCblk->module;
+	int channel = pCblk->channel;
+
+	/* Reinitialize the control block */
+	memset((void *)pCblk, 0, sizeof(dmacHw_CBLK_t));
+	pCblk->module = module;
+	pCblk->channel = channel;
+
+	/* Enable DMA controller */
+	dmacHw_DMA_ENABLE(pCblk->module);
+	/* Reset DMA channel */
+	dmacHw_RESET_CONTROL_LO(pCblk->module, pCblk->channel);
+	dmacHw_RESET_CONTROL_HI(pCblk->module, pCblk->channel);
+	dmacHw_RESET_CONFIG_LO(pCblk->module, pCblk->channel);
+	dmacHw_RESET_CONFIG_HI(pCblk->module, pCblk->channel);
+
+	/* Clear all raw interrupt status */
+	dmacHw_TRAN_INT_CLEAR(pCblk->module, pCblk->channel);
+	dmacHw_BLOCK_INT_CLEAR(pCblk->module, pCblk->channel);
+	dmacHw_ERROR_INT_CLEAR(pCblk->module, pCblk->channel);
+
+	/* Mask event specific interrupts */
+	dmacHw_TRAN_INT_DISABLE(pCblk->module, pCblk->channel);
+	dmacHw_BLOCK_INT_DISABLE(pCblk->module, pCblk->channel);
+	dmacHw_STRAN_INT_DISABLE(pCblk->module, pCblk->channel);
+	dmacHw_DTRAN_INT_DISABLE(pCblk->module, pCblk->channel);
+	dmacHw_ERROR_INT_DISABLE(pCblk->module, pCblk->channel);
+
+	return 0;
+}
+
+/****************************************************************************/
+/**
+*  @brief  Finds amount of memory required to form a descriptor ring
+*
+*
+*  @return   Number of bytes required to form a descriptor ring
+*
+*
+*/
+/****************************************************************************/
+uint32_t dmacHw_descriptorLen(uint32_t descCnt	/* [ IN ] Number of descriptor in the ring */
+    ) {
+	/* Need extra 4 byte to ensure 32 bit alignment  */
+	return (descCnt * sizeof(dmacHw_DESC_t)) + sizeof(dmacHw_DESC_RING_t) +
+		sizeof(uint32_t);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Initializes descriptor ring
+*
+*  This function will initializes the descriptor ring of a DMA channel
+*
+*
+*  @return   -1 - On failure
+*             0 - On success
+*  @note
+*     - "len" parameter should be obtained from "dmacHw_descriptorLen"
+*     - Descriptor buffer MUST be 32 bit aligned and uncached as it is
+*       accessed by ARM and DMA
+*/
+/****************************************************************************/
+int dmacHw_initDescriptor(void *pDescriptorVirt,	/*  [ IN ] Virtual address of uncahced buffer allocated to form descriptor ring */
+			  uint32_t descriptorPhyAddr,	/*  [ IN ] Physical address of pDescriptorVirt (descriptor buffer) */
+			  uint32_t len,	/*  [ IN ] Size of the pBuf */
+			  uint32_t num	/*  [ IN ] Number of descriptor in the ring */
+    ) {
+	uint32_t i;
+	dmacHw_DESC_RING_t *pRing;
+	dmacHw_DESC_t *pDesc;
+
+	/* Check the alignment of the descriptor */
+	if ((uint32_t) pDescriptorVirt & 0x00000003) {
+		dmacHw_ASSERT(0);
+		return -1;
+	}
+
+	/* Check if enough space has been allocated for descriptor ring */
+	if (len < dmacHw_descriptorLen(num)) {
+		return -1;
+	}
+
+	pRing = dmacHw_GET_DESC_RING(pDescriptorVirt);
+	pRing->pHead =
+	    (dmacHw_DESC_t *) ((uint32_t) pRing + sizeof(dmacHw_DESC_RING_t));
+	pRing->pFree = pRing->pTail = pRing->pEnd = pRing->pHead;
+	pRing->pProg = dmacHw_DESC_INIT;
+	/* Initialize link item chain, starting from the head */
+	pDesc = pRing->pHead;
+	/* Find the offset between virtual to physical address */
+	pRing->virt2PhyOffset = (uint32_t) pDescriptorVirt - descriptorPhyAddr;
+
+	/* Form the descriptor ring */
+	for (i = 0; i < num - 1; i++) {
+		/* Clear link list item */
+		memset((void *)pDesc, 0, sizeof(dmacHw_DESC_t));
+		/* Point to the next item in the physical address */
+		pDesc->llpPhy = (uint32_t) (pDesc + 1) - pRing->virt2PhyOffset;
+		/* Point to the next item in the virtual address */
+		pDesc->llp = (uint32_t) (pDesc + 1);
+		/* Mark descriptor is ready to use */
+		pDesc->ctl.hi = dmacHw_DESC_FREE;
+		/* Look into next link list item */
+		pDesc++;
+	}
+
+	/* Clear last link list item */
+	memset((void *)pDesc, 0, sizeof(dmacHw_DESC_t));
+	/* Last item pointing to the first item in the
+	   physical address to complete the ring */
+	pDesc->llpPhy = (uint32_t) pRing->pHead - pRing->virt2PhyOffset;
+	/* Last item pointing to the first item in the
+	   virtual address to complete the ring
+	 */
+	pDesc->llp = (uint32_t) pRing->pHead;
+	/* Mark descriptor is ready to use */
+	pDesc->ctl.hi = dmacHw_DESC_FREE;
+	/* Set the number of descriptors in the ring */
+	pRing->num = num;
+	return 0;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Configure DMA channel
+*
+*  @return  0  : On success
+*           -1 : On failure
+*/
+/****************************************************************************/
+int dmacHw_configChannel(dmacHw_HANDLE_t handle,	/*   [ IN ] DMA Channel handle */
+			 dmacHw_CONFIG_t *pConfig	/*   [ IN ] Configuration settings */
+    ) {
+	dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+	uint32_t cfgHigh = 0;
+	int srcTrSize;
+	int dstTrSize;
+
+	pCblk->varDataStarted = 0;
+	pCblk->userData = NULL;
+
+	/* Configure
+	   - Burst transaction when enough data in available in FIFO
+	   - AHB Access protection 1
+	   - Source and destination peripheral ports
+	 */
+	cfgHigh =
+	    dmacHw_REG_CFG_HI_FIFO_ENOUGH | dmacHw_REG_CFG_HI_AHB_HPROT_1 |
+	    dmacHw_SRC_PERI_INTF(pConfig->
+				 srcPeripheralPort) |
+	    dmacHw_DST_PERI_INTF(pConfig->dstPeripheralPort);
+	/* Set priority */
+	dmacHw_SET_CHANNEL_PRIORITY(pCblk->module, pCblk->channel,
+				    pConfig->channelPriority);
+
+	if (pConfig->dstStatusRegisterAddress != 0) {
+		/* Destination status update enable */
+		cfgHigh |= dmacHw_REG_CFG_HI_UPDATE_DST_STAT;
+		/* Configure status registers */
+		dmacHw_SET_DSTATAR(pCblk->module, pCblk->channel,
+				   pConfig->dstStatusRegisterAddress);
+	}
+
+	if (pConfig->srcStatusRegisterAddress != 0) {
+		/* Source status update enable */
+		cfgHigh |= dmacHw_REG_CFG_HI_UPDATE_SRC_STAT;
+		/* Source status update enable */
+		dmacHw_SET_SSTATAR(pCblk->module, pCblk->channel,
+				   pConfig->srcStatusRegisterAddress);
+	}
+	/* Configure the config high register */
+	dmacHw_GET_CONFIG_HI(pCblk->module, pCblk->channel) = cfgHigh;
+
+	/* Clear all raw interrupt status */
+	dmacHw_TRAN_INT_CLEAR(pCblk->module, pCblk->channel);
+	dmacHw_BLOCK_INT_CLEAR(pCblk->module, pCblk->channel);
+	dmacHw_ERROR_INT_CLEAR(pCblk->module, pCblk->channel);
+
+	/* Configure block interrupt */
+	if (pConfig->blockTransferInterrupt == dmacHw_INTERRUPT_ENABLE) {
+		dmacHw_BLOCK_INT_ENABLE(pCblk->module, pCblk->channel);
+	} else {
+		dmacHw_BLOCK_INT_DISABLE(pCblk->module, pCblk->channel);
+	}
+	/* Configure complete transfer interrupt */
+	if (pConfig->completeTransferInterrupt == dmacHw_INTERRUPT_ENABLE) {
+		dmacHw_TRAN_INT_ENABLE(pCblk->module, pCblk->channel);
+	} else {
+		dmacHw_TRAN_INT_DISABLE(pCblk->module, pCblk->channel);
+	}
+	/* Configure error interrupt */
+	if (pConfig->errorInterrupt == dmacHw_INTERRUPT_ENABLE) {
+		dmacHw_ERROR_INT_ENABLE(pCblk->module, pCblk->channel);
+	} else {
+		dmacHw_ERROR_INT_DISABLE(pCblk->module, pCblk->channel);
+	}
+	/* Configure gather register */
+	if (pConfig->srcGatherWidth) {
+		srcTrSize =
+		    dmacHw_GetTrWidthInBytes(pConfig->srcMaxTransactionWidth);
+		if (!
+		    ((pConfig->srcGatherWidth % srcTrSize)
+		     && (pConfig->srcGatherJump % srcTrSize))) {
+			dmacHw_REG_SGR_LO(pCblk->module, pCblk->channel) =
+			    ((pConfig->srcGatherWidth /
+			      srcTrSize) << 20) | (pConfig->srcGatherJump /
+						   srcTrSize);
+		} else {
+			return -1;
+		}
+	}
+	/* Configure scatter register */
+	if (pConfig->dstScatterWidth) {
+		dstTrSize =
+		    dmacHw_GetTrWidthInBytes(pConfig->dstMaxTransactionWidth);
+		if (!
+		    ((pConfig->dstScatterWidth % dstTrSize)
+		     && (pConfig->dstScatterJump % dstTrSize))) {
+			dmacHw_REG_DSR_LO(pCblk->module, pCblk->channel) =
+			    ((pConfig->dstScatterWidth /
+			      dstTrSize) << 20) | (pConfig->dstScatterJump /
+						   dstTrSize);
+		} else {
+			return -1;
+		}
+	}
+	return 0;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Indicates whether DMA transfer is in progress or completed
+*
+*  @return   DMA transfer status
+*          dmacHw_TRANSFER_STATUS_BUSY:         DMA Transfer ongoing
+*          dmacHw_TRANSFER_STATUS_DONE:         DMA Transfer completed
+*          dmacHw_TRANSFER_STATUS_ERROR:        DMA Transfer error
+*
+*/
+/****************************************************************************/
+dmacHw_TRANSFER_STATUS_e dmacHw_transferCompleted(dmacHw_HANDLE_t handle	/*   [ IN ] DMA Channel handle */
+    ) {
+	dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+
+	if (CHANNEL_BUSY(pCblk->module, pCblk->channel)) {
+		return dmacHw_TRANSFER_STATUS_BUSY;
+	} else if (dmacHw_REG_INT_RAW_ERROR(pCblk->module) &
+		   (0x00000001 << pCblk->channel)) {
+		return dmacHw_TRANSFER_STATUS_ERROR;
+	}
+
+	return dmacHw_TRANSFER_STATUS_DONE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Set descriptors for known data length
+*
+*  When DMA has to work as a flow controller, this function prepares the
+*  descriptor chain to transfer data
+*
+*  from:
+*          - Memory to memory
+*          - Peripheral to memory
+*          - Memory to Peripheral
+*          - Peripheral to Peripheral
+*
+*  @return   -1 - On failure
+*             0 - On success
+*
+*/
+/****************************************************************************/
+int dmacHw_setDataDescriptor(dmacHw_CONFIG_t *pConfig,	/*   [ IN ] Configuration settings */
+			     void *pDescriptor,	/*   [ IN ] Descriptor buffer */
+			     void *pSrcAddr,	/*   [ IN ] Source (Peripheral/Memory) address */
+			     void *pDstAddr,	/*   [ IN ] Destination (Peripheral/Memory) address */
+			     size_t dataLen	/*   [ IN ] Data length in bytes */
+    ) {
+	dmacHw_TRANSACTION_WIDTH_e dstTrWidth;
+	dmacHw_TRANSACTION_WIDTH_e srcTrWidth;
+	dmacHw_DESC_RING_t *pRing = dmacHw_GET_DESC_RING(pDescriptor);
+	dmacHw_DESC_t *pStart;
+	dmacHw_DESC_t *pProg;
+	int srcTs = 0;
+	int blkTs = 0;
+	int oddSize = 0;
+	int descCount = 0;
+	int count = 0;
+	int dstTrSize = 0;
+	int srcTrSize = 0;
+	uint32_t maxBlockSize = dmacHw_MAX_BLOCKSIZE;
+
+	dstTrSize = dmacHw_GetTrWidthInBytes(pConfig->dstMaxTransactionWidth);
+	srcTrSize = dmacHw_GetTrWidthInBytes(pConfig->srcMaxTransactionWidth);
+
+	/* Skip Tx if buffer is NULL  or length is unknown */
+	if ((pSrcAddr == NULL) || (pDstAddr == NULL) || (dataLen == 0)) {
+		/* Do not initiate transfer */
+		return -1;
+	}
+
+	/* Ensure scatter and gather are transaction aligned */
+	if ((pConfig->srcGatherWidth % srcTrSize)
+	    || (pConfig->dstScatterWidth % dstTrSize)) {
+		return -2;
+	}
+
+	/*
+	   Background 1: DMAC can not perform DMA if source and destination addresses are
+	   not properly aligned with the channel's transaction width. So, for successful
+	   DMA transfer, transaction width must be set according to the alignment of the
+	   source and destination address.
+	 */
+
+	/* Adjust destination transaction width if destination address is not aligned properly */
+	dstTrWidth = pConfig->dstMaxTransactionWidth;
+	while (dmacHw_ADDRESS_MASK(dstTrSize) & (uint32_t) pDstAddr) {
+		dstTrWidth = dmacHw_GetNextTrWidth(dstTrWidth);
+		dstTrSize = dmacHw_GetTrWidthInBytes(dstTrWidth);
+	}
+
+	/* Adjust source transaction width if source address is not aligned properly */
+	srcTrWidth = pConfig->srcMaxTransactionWidth;
+	while (dmacHw_ADDRESS_MASK(srcTrSize) & (uint32_t) pSrcAddr) {
+		srcTrWidth = dmacHw_GetNextTrWidth(srcTrWidth);
+		srcTrSize = dmacHw_GetTrWidthInBytes(srcTrWidth);
+	}
+
+	/* Find the maximum transaction per descriptor */
+	if (pConfig->maxDataPerBlock
+	    && ((pConfig->maxDataPerBlock / srcTrSize) <
+		dmacHw_MAX_BLOCKSIZE)) {
+		maxBlockSize = pConfig->maxDataPerBlock / srcTrSize;
+	}
+
+	/* Find number of source transactions needed to complete the DMA transfer */
+	srcTs = dataLen / srcTrSize;
+	/* Find the odd number of bytes that need to be transferred as single byte transaction width */
+	if (srcTs && (dstTrSize > srcTrSize)) {
+		oddSize = dataLen % dstTrSize;
+		/* Adjust source transaction count due to "oddSize" */
+		srcTs = srcTs - (oddSize / srcTrSize);
+	} else {
+		oddSize = dataLen % srcTrSize;
+	}
+	/* Adjust "descCount" due to "oddSize" */
+	if (oddSize) {
+		descCount++;
+	}
+	/* Find the number of descriptor needed for total "srcTs" */
+	if (srcTs) {
+		descCount += ((srcTs - 1) / maxBlockSize) + 1;
+	}
+
+	/* Check the availability of "descCount" discriptors in the ring */
+	pProg = pRing->pHead;
+	for (count = 0; (descCount <= pRing->num) && (count < descCount);
+	     count++) {
+		if ((pProg->ctl.hi & dmacHw_DESC_FREE) == 0) {
+			/* Sufficient descriptors are not available */
+			return -3;
+		}
+		pProg = (dmacHw_DESC_t *) pProg->llp;
+	}
+
+	/* Remember the link list item to program the channel registers */
+	pStart = pProg = pRing->pHead;
+	/* Make a link list with "descCount(=count)" number of descriptors */
+	while (count) {
+		/* Reset channel control information */
+		pProg->ctl.lo = 0;
+		/* Enable source gather if configured */
+		if (pConfig->srcGatherWidth) {
+			pProg->ctl.lo |= dmacHw_REG_CTL_SG_ENABLE;
+		}
+		/* Enable destination scatter if configured */
+		if (pConfig->dstScatterWidth) {
+			pProg->ctl.lo |= dmacHw_REG_CTL_DS_ENABLE;
+		}
+		/* Set source and destination address */
+		pProg->sar = (uint32_t) pSrcAddr;
+		pProg->dar = (uint32_t) pDstAddr;
+		/* Use "devCtl" to mark that user memory need to be freed later if needed */
+		if (pProg == pRing->pHead) {
+			pProg->devCtl = dmacHw_FREE_USER_MEMORY;
+		} else {
+			pProg->devCtl = 0;
+		}
+
+		blkTs = srcTs;
+
+		/* Special treatmeant for last descriptor */
+		if (count == 1) {
+			/* Mark the last descriptor */
+			pProg->ctl.lo &=
+			    ~(dmacHw_REG_CTL_LLP_DST_EN |
+			      dmacHw_REG_CTL_LLP_SRC_EN);
+			/* Treatment for odd data bytes */
+			if (oddSize) {
+				/* Adjust for single byte transaction width */
+				switch (pConfig->transferType) {
+				case dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM:
+					dstTrWidth =
+					    dmacHw_DST_TRANSACTION_WIDTH_8;
+					blkTs =
+					    (oddSize / srcTrSize) +
+					    ((oddSize % srcTrSize) ? 1 : 0);
+					break;
+				case dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL:
+					srcTrWidth =
+					    dmacHw_SRC_TRANSACTION_WIDTH_8;
+					blkTs = oddSize;
+					break;
+				case dmacHw_TRANSFER_TYPE_MEM_TO_MEM:
+					srcTrWidth =
+					    dmacHw_SRC_TRANSACTION_WIDTH_8;
+					dstTrWidth =
+					    dmacHw_DST_TRANSACTION_WIDTH_8;
+					blkTs = oddSize;
+					break;
+				case dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_PERIPHERAL:
+					/* Do not adjust the transaction width  */
+					break;
+				}
+			} else {
+				srcTs -= blkTs;
+			}
+		} else {
+			if (srcTs / maxBlockSize) {
+				blkTs = maxBlockSize;
+			}
+			/* Remaining source transactions for next iteration */
+			srcTs -= blkTs;
+		}
+		/* Must have a valid source transactions */
+		dmacHw_ASSERT(blkTs > 0);
+		/* Set control information */
+		if (pConfig->flowControler == dmacHw_FLOW_CONTROL_DMA) {
+			pProg->ctl.lo |= pConfig->transferType |
+			    pConfig->srcUpdate |
+			    pConfig->dstUpdate |
+			    srcTrWidth |
+			    dstTrWidth |
+			    pConfig->srcMaxBurstWidth |
+			    pConfig->dstMaxBurstWidth |
+			    pConfig->srcMasterInterface |
+			    pConfig->dstMasterInterface | dmacHw_REG_CTL_INT_EN;
+		} else {
+			uint32_t transferType = 0;
+			switch (pConfig->transferType) {
+			case dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM:
+				transferType = dmacHw_REG_CTL_TTFC_PM_PERI;
+				break;
+			case dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL:
+				transferType = dmacHw_REG_CTL_TTFC_MP_PERI;
+				break;
+			default:
+				dmacHw_ASSERT(0);
+			}
+			pProg->ctl.lo |= transferType |
+			    pConfig->srcUpdate |
+			    pConfig->dstUpdate |
+			    srcTrWidth |
+			    dstTrWidth |
+			    pConfig->srcMaxBurstWidth |
+			    pConfig->dstMaxBurstWidth |
+			    pConfig->srcMasterInterface |
+			    pConfig->dstMasterInterface | dmacHw_REG_CTL_INT_EN;
+		}
+
+		/* Set block transaction size */
+		pProg->ctl.hi = blkTs & dmacHw_REG_CTL_BLOCK_TS_MASK;
+		/* Look for next descriptor */
+		if (count > 1) {
+			/* Point to the next descriptor */
+			pProg = (dmacHw_DESC_t *) pProg->llp;
+
+			/* Update source and destination address for next iteration */
+			switch (pConfig->transferType) {
+			case dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM:
+				if (pConfig->dstScatterWidth) {
+					pDstAddr =
+					    (char *)pDstAddr +
+					    blkTs * srcTrSize +
+					    (((blkTs * srcTrSize) /
+					      pConfig->dstScatterWidth) *
+					     pConfig->dstScatterJump);
+				} else {
+					pDstAddr =
+					    (char *)pDstAddr +
+					    blkTs * srcTrSize;
+				}
+				break;
+			case dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL:
+				if (pConfig->srcGatherWidth) {
+					pSrcAddr =
+					    (char *)pDstAddr +
+					    blkTs * srcTrSize +
+					    (((blkTs * srcTrSize) /
+					      pConfig->srcGatherWidth) *
+					     pConfig->srcGatherJump);
+				} else {
+					pSrcAddr =
+					    (char *)pSrcAddr +
+					    blkTs * srcTrSize;
+				}
+				break;
+			case dmacHw_TRANSFER_TYPE_MEM_TO_MEM:
+				if (pConfig->dstScatterWidth) {
+					pDstAddr =
+					    (char *)pDstAddr +
+					    blkTs * srcTrSize +
+					    (((blkTs * srcTrSize) /
+					      pConfig->dstScatterWidth) *
+					     pConfig->dstScatterJump);
+				} else {
+					pDstAddr =
+					    (char *)pDstAddr +
+					    blkTs * srcTrSize;
+				}
+
+				if (pConfig->srcGatherWidth) {
+					pSrcAddr =
+					    (char *)pDstAddr +
+					    blkTs * srcTrSize +
+					    (((blkTs * srcTrSize) /
+					      pConfig->srcGatherWidth) *
+					     pConfig->srcGatherJump);
+				} else {
+					pSrcAddr =
+					    (char *)pSrcAddr +
+					    blkTs * srcTrSize;
+				}
+				break;
+			case dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_PERIPHERAL:
+				/* Do not adjust the address */
+				break;
+			default:
+				dmacHw_ASSERT(0);
+			}
+		} else {
+			/* At the end of transfer "srcTs" must be zero */
+			dmacHw_ASSERT(srcTs == 0);
+		}
+		count--;
+	}
+
+	/* Remember the descriptor to initialize the registers */
+	if (pRing->pProg == dmacHw_DESC_INIT) {
+		pRing->pProg = pStart;
+	}
+	/* Indicate that the descriptor is updated */
+	pRing->pEnd = pProg;
+	/* Head pointing to the next descriptor */
+	pRing->pHead = (dmacHw_DESC_t *) pProg->llp;
+	/* Update Tail pointer if destination is a peripheral,
+	   because no one is going to read from the pTail
+	 */
+	if (!dmacHw_DST_IS_MEMORY(pConfig->transferType)) {
+		pRing->pTail = pRing->pHead;
+	}
+	return 0;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Provides DMA controller attributes
+*
+*
+*  @return  DMA controller attributes
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+uint32_t dmacHw_getDmaControllerAttribute(dmacHw_HANDLE_t handle,	/*  [ IN ]  DMA Channel handle */
+					  dmacHw_CONTROLLER_ATTRIB_e attr	/*  [ IN ]  DMA Controler attribute of type  dmacHw_CONTROLLER_ATTRIB_e */
+    ) {
+	dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+
+	switch (attr) {
+	case dmacHw_CONTROLLER_ATTRIB_CHANNEL_NUM:
+		return dmacHw_GET_NUM_CHANNEL(pCblk->module);
+	case dmacHw_CONTROLLER_ATTRIB_CHANNEL_MAX_BLOCK_SIZE:
+		return (1 <<
+			 (dmacHw_GET_MAX_BLOCK_SIZE
+			  (pCblk->module, pCblk->module) + 2)) - 8;
+	case dmacHw_CONTROLLER_ATTRIB_MASTER_INTF_NUM:
+		return dmacHw_GET_NUM_INTERFACE(pCblk->module);
+	case dmacHw_CONTROLLER_ATTRIB_CHANNEL_BUS_WIDTH:
+		return 32 << dmacHw_GET_CHANNEL_DATA_WIDTH(pCblk->module,
+							   pCblk->channel);
+	case dmacHw_CONTROLLER_ATTRIB_CHANNEL_FIFO_SIZE:
+		return GetFifoSize(handle);
+	}
+	dmacHw_ASSERT(0);
+	return 0;
+}
diff --git a/arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c b/arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c
new file mode 100644
index 000000000000..ff7b436d0935
--- /dev/null
+++ b/arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c
@@ -0,0 +1,1017 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*  @file    dmacHw_extra.c
+*
+*  @brief   Extra Low level DMA controller driver routines
+*
+*  @note
+*
+*   These routines provide basic DMA functionality only.
+*/
+/****************************************************************************/
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#include <csp/stdint.h>
+#include <stddef.h>
+
+#include <csp/dmacHw.h>
+#include <mach/csp/dmacHw_reg.h>
+#include <mach/csp/dmacHw_priv.h>
+
+extern dmacHw_CBLK_t dmacHw_gCblk[dmacHw_MAX_CHANNEL_COUNT];	/* Declared in dmacHw.c */
+
+/* ---- External Function Prototypes ------------------------------------- */
+
+/* ---- Internal Use Function Prototypes --------------------------------- */
+/****************************************************************************/
+/**
+*  @brief   Overwrites data length in the descriptor
+*
+*  This function overwrites data length in the descriptor
+*
+*
+*  @return   void
+*
+*  @note
+*          This is only used for PCM channel
+*/
+/****************************************************************************/
+void dmacHw_setDataLength(dmacHw_CONFIG_t *pConfig,	/*   [ IN ] Configuration settings */
+			  void *pDescriptor,	/*   [ IN ] Descriptor buffer */
+			  size_t dataLen	/*   [ IN ] Data length in bytes */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Helper function to display DMA registers
+*
+*  @return  void
+*
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+static void DisplayRegisterContents(int module,	/*   [ IN ] DMA Controller unit  (0-1) */
+				    int channel,	/*   [ IN ] DMA Channel          (0-7) / -1(all) */
+				    int (*fpPrint) (const char *, ...)	/*   [ IN ] Callback to the print function */
+    ) {
+	int chan;
+
+	(*fpPrint) ("Displaying register content \n\n");
+	(*fpPrint) ("Module %d: Interrupt raw transfer              0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_INT_RAW_TRAN(module)));
+	(*fpPrint) ("Module %d: Interrupt raw block                 0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_INT_RAW_BLOCK(module)));
+	(*fpPrint) ("Module %d: Interrupt raw src transfer          0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_INT_RAW_STRAN(module)));
+	(*fpPrint) ("Module %d: Interrupt raw dst transfer          0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_INT_RAW_DTRAN(module)));
+	(*fpPrint) ("Module %d: Interrupt raw error                 0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_INT_RAW_ERROR(module)));
+	(*fpPrint) ("--------------------------------------------------\n");
+	(*fpPrint) ("Module %d: Interrupt stat transfer             0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_INT_STAT_TRAN(module)));
+	(*fpPrint) ("Module %d: Interrupt stat block                0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_INT_STAT_BLOCK(module)));
+	(*fpPrint) ("Module %d: Interrupt stat src transfer         0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_INT_STAT_STRAN(module)));
+	(*fpPrint) ("Module %d: Interrupt stat dst transfer         0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_INT_STAT_DTRAN(module)));
+	(*fpPrint) ("Module %d: Interrupt stat error                0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_INT_STAT_ERROR(module)));
+	(*fpPrint) ("--------------------------------------------------\n");
+	(*fpPrint) ("Module %d: Interrupt mask transfer             0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_INT_MASK_TRAN(module)));
+	(*fpPrint) ("Module %d: Interrupt mask block                0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_INT_MASK_BLOCK(module)));
+	(*fpPrint) ("Module %d: Interrupt mask src transfer         0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_INT_MASK_STRAN(module)));
+	(*fpPrint) ("Module %d: Interrupt mask dst transfer         0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_INT_MASK_DTRAN(module)));
+	(*fpPrint) ("Module %d: Interrupt mask error                0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_INT_MASK_ERROR(module)));
+	(*fpPrint) ("--------------------------------------------------\n");
+	(*fpPrint) ("Module %d: Interrupt clear transfer            0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_INT_CLEAR_TRAN(module)));
+	(*fpPrint) ("Module %d: Interrupt clear block               0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_INT_CLEAR_BLOCK(module)));
+	(*fpPrint) ("Module %d: Interrupt clear src transfer        0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_INT_CLEAR_STRAN(module)));
+	(*fpPrint) ("Module %d: Interrupt clear dst transfer        0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_INT_CLEAR_DTRAN(module)));
+	(*fpPrint) ("Module %d: Interrupt clear error               0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_INT_CLEAR_ERROR(module)));
+	(*fpPrint) ("--------------------------------------------------\n");
+	(*fpPrint) ("Module %d: SW source req                       0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_SW_HS_SRC_REQ(module)));
+	(*fpPrint) ("Module %d: SW dest req                         0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_SW_HS_DST_REQ(module)));
+	(*fpPrint) ("Module %d: SW source signal                    0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_SW_HS_SRC_SGL_REQ(module)));
+	(*fpPrint) ("Module %d: SW dest signal                      0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_SW_HS_DST_SGL_REQ(module)));
+	(*fpPrint) ("Module %d: SW source last                      0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_SW_HS_SRC_LST_REQ(module)));
+	(*fpPrint) ("Module %d: SW dest last                        0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_SW_HS_DST_LST_REQ(module)));
+	(*fpPrint) ("--------------------------------------------------\n");
+	(*fpPrint) ("Module %d: misc config                         0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_MISC_CFG(module)));
+	(*fpPrint) ("Module %d: misc channel enable                 0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_MISC_CH_ENABLE(module)));
+	(*fpPrint) ("Module %d: misc ID                             0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_MISC_ID(module)));
+	(*fpPrint) ("Module %d: misc test                           0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_MISC_TEST(module)));
+
+	if (channel == -1) {
+		for (chan = 0; chan < 8; chan++) {
+			(*fpPrint)
+			    ("--------------------------------------------------\n");
+			(*fpPrint)
+			    ("Module %d: Channel %d Source                   0x%X\n",
+			     module, chan,
+			     (uint32_t) (dmacHw_REG_SAR(module, chan)));
+			(*fpPrint)
+			    ("Module %d: Channel %d Destination              0x%X\n",
+			     module, chan,
+			     (uint32_t) (dmacHw_REG_DAR(module, chan)));
+			(*fpPrint)
+			    ("Module %d: Channel %d LLP                      0x%X\n",
+			     module, chan,
+			     (uint32_t) (dmacHw_REG_LLP(module, chan)));
+			(*fpPrint)
+			    ("Module %d: Channel %d Control (LO)             0x%X\n",
+			     module, chan,
+			     (uint32_t) (dmacHw_REG_CTL_LO(module, chan)));
+			(*fpPrint)
+			    ("Module %d: Channel %d Control (HI)             0x%X\n",
+			     module, chan,
+			     (uint32_t) (dmacHw_REG_CTL_HI(module, chan)));
+			(*fpPrint)
+			    ("Module %d: Channel %d Source Stats             0x%X\n",
+			     module, chan,
+			     (uint32_t) (dmacHw_REG_SSTAT(module, chan)));
+			(*fpPrint)
+			    ("Module %d: Channel %d Dest Stats               0x%X\n",
+			     module, chan,
+			     (uint32_t) (dmacHw_REG_DSTAT(module, chan)));
+			(*fpPrint)
+			    ("Module %d: Channel %d Source Stats Addr        0x%X\n",
+			     module, chan,
+			     (uint32_t) (dmacHw_REG_SSTATAR(module, chan)));
+			(*fpPrint)
+			    ("Module %d: Channel %d Dest Stats Addr          0x%X\n",
+			     module, chan,
+			     (uint32_t) (dmacHw_REG_DSTATAR(module, chan)));
+			(*fpPrint)
+			    ("Module %d: Channel %d Config (LO)              0x%X\n",
+			     module, chan,
+			     (uint32_t) (dmacHw_REG_CFG_LO(module, chan)));
+			(*fpPrint)
+			    ("Module %d: Channel %d Config (HI)              0x%X\n",
+			     module, chan,
+			     (uint32_t) (dmacHw_REG_CFG_HI(module, chan)));
+		}
+	} else {
+		chan = channel;
+		(*fpPrint)
+		    ("--------------------------------------------------\n");
+		(*fpPrint)
+		    ("Module %d: Channel %d Source                   0x%X\n",
+		     module, chan, (uint32_t) (dmacHw_REG_SAR(module, chan)));
+		(*fpPrint)
+		    ("Module %d: Channel %d Destination              0x%X\n",
+		     module, chan, (uint32_t) (dmacHw_REG_DAR(module, chan)));
+		(*fpPrint)
+		    ("Module %d: Channel %d LLP                      0x%X\n",
+		     module, chan, (uint32_t) (dmacHw_REG_LLP(module, chan)));
+		(*fpPrint)
+		    ("Module %d: Channel %d Control (LO)             0x%X\n",
+		     module, chan,
+		     (uint32_t) (dmacHw_REG_CTL_LO(module, chan)));
+		(*fpPrint)
+		    ("Module %d: Channel %d Control (HI)             0x%X\n",
+		     module, chan,
+		     (uint32_t) (dmacHw_REG_CTL_HI(module, chan)));
+		(*fpPrint)
+		    ("Module %d: Channel %d Source Stats             0x%X\n",
+		     module, chan, (uint32_t) (dmacHw_REG_SSTAT(module, chan)));
+		(*fpPrint)
+		    ("Module %d: Channel %d Dest Stats               0x%X\n",
+		     module, chan, (uint32_t) (dmacHw_REG_DSTAT(module, chan)));
+		(*fpPrint)
+		    ("Module %d: Channel %d Source Stats Addr        0x%X\n",
+		     module, chan,
+		     (uint32_t) (dmacHw_REG_SSTATAR(module, chan)));
+		(*fpPrint)
+		    ("Module %d: Channel %d Dest Stats Addr          0x%X\n",
+		     module, chan,
+		     (uint32_t) (dmacHw_REG_DSTATAR(module, chan)));
+		(*fpPrint)
+		    ("Module %d: Channel %d Config (LO)              0x%X\n",
+		     module, chan,
+		     (uint32_t) (dmacHw_REG_CFG_LO(module, chan)));
+		(*fpPrint)
+		    ("Module %d: Channel %d Config (HI)              0x%X\n",
+		     module, chan,
+		     (uint32_t) (dmacHw_REG_CFG_HI(module, chan)));
+	}
+}
+
+/****************************************************************************/
+/**
+*  @brief   Helper function to display descriptor ring
+*
+*  @return  void
+*
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+static void DisplayDescRing(void *pDescriptor,	/*   [ IN ] Descriptor buffer */
+			    int (*fpPrint) (const char *, ...)	/*   [ IN ] Callback to the print function */
+    ) {
+	dmacHw_DESC_RING_t *pRing = dmacHw_GET_DESC_RING(pDescriptor);
+	dmacHw_DESC_t *pStart;
+
+	if (pRing->pHead == NULL) {
+		return;
+	}
+
+	pStart = pRing->pHead;
+
+	while ((dmacHw_DESC_t *) pStart->llp != pRing->pHead) {
+		if (pStart == pRing->pHead) {
+			(*fpPrint) ("Head\n");
+		}
+		if (pStart == pRing->pTail) {
+			(*fpPrint) ("Tail\n");
+		}
+		if (pStart == pRing->pProg) {
+			(*fpPrint) ("Prog\n");
+		}
+		if (pStart == pRing->pEnd) {
+			(*fpPrint) ("End\n");
+		}
+		if (pStart == pRing->pFree) {
+			(*fpPrint) ("Free\n");
+		}
+		(*fpPrint) ("0x%X:\n", (uint32_t) pStart);
+		(*fpPrint) ("sar    0x%0X\n", pStart->sar);
+		(*fpPrint) ("dar    0x%0X\n", pStart->dar);
+		(*fpPrint) ("llp    0x%0X\n", pStart->llp);
+		(*fpPrint) ("ctl.lo 0x%0X\n", pStart->ctl.lo);
+		(*fpPrint) ("ctl.hi 0x%0X\n", pStart->ctl.hi);
+		(*fpPrint) ("sstat  0x%0X\n", pStart->sstat);
+		(*fpPrint) ("dstat  0x%0X\n", pStart->dstat);
+		(*fpPrint) ("devCtl 0x%0X\n", pStart->devCtl);
+
+		pStart = (dmacHw_DESC_t *) pStart->llp;
+	}
+	if (pStart == pRing->pHead) {
+		(*fpPrint) ("Head\n");
+	}
+	if (pStart == pRing->pTail) {
+		(*fpPrint) ("Tail\n");
+	}
+	if (pStart == pRing->pProg) {
+		(*fpPrint) ("Prog\n");
+	}
+	if (pStart == pRing->pEnd) {
+		(*fpPrint) ("End\n");
+	}
+	if (pStart == pRing->pFree) {
+		(*fpPrint) ("Free\n");
+	}
+	(*fpPrint) ("0x%X:\n", (uint32_t) pStart);
+	(*fpPrint) ("sar    0x%0X\n", pStart->sar);
+	(*fpPrint) ("dar    0x%0X\n", pStart->dar);
+	(*fpPrint) ("llp    0x%0X\n", pStart->llp);
+	(*fpPrint) ("ctl.lo 0x%0X\n", pStart->ctl.lo);
+	(*fpPrint) ("ctl.hi 0x%0X\n", pStart->ctl.hi);
+	(*fpPrint) ("sstat  0x%0X\n", pStart->sstat);
+	(*fpPrint) ("dstat  0x%0X\n", pStart->dstat);
+	(*fpPrint) ("devCtl 0x%0X\n", pStart->devCtl);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Check if DMA channel is the flow controller
+*
+*  @return  1 : If DMA is a flow controler
+*           0 : Peripheral is the flow controller
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+static inline int DmaIsFlowController(void *pDescriptor	/*   [ IN ] Descriptor buffer */
+    ) {
+	uint32_t ttfc =
+	    (dmacHw_GET_DESC_RING(pDescriptor))->pTail->ctl.
+	    lo & dmacHw_REG_CTL_TTFC_MASK;
+
+	switch (ttfc) {
+	case dmacHw_REG_CTL_TTFC_MM_DMAC:
+	case dmacHw_REG_CTL_TTFC_MP_DMAC:
+	case dmacHw_REG_CTL_TTFC_PM_DMAC:
+	case dmacHw_REG_CTL_TTFC_PP_DMAC:
+		return 1;
+	}
+
+	return 0;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Overwrites data length in the descriptor
+*
+*  This function overwrites data length in the descriptor
+*
+*
+*  @return   void
+*
+*  @note
+*          This is only used for PCM channel
+*/
+/****************************************************************************/
+void dmacHw_setDataLength(dmacHw_CONFIG_t *pConfig,	/*   [ IN ] Configuration settings */
+			  void *pDescriptor,	/*   [ IN ] Descriptor buffer */
+			  size_t dataLen	/*   [ IN ] Data length in bytes */
+    ) {
+	dmacHw_DESC_t *pProg;
+	dmacHw_DESC_t *pHead;
+	int srcTs = 0;
+	int srcTrSize = 0;
+
+	pHead = (dmacHw_GET_DESC_RING(pDescriptor))->pHead;
+	pProg = pHead;
+
+	srcTrSize = dmacHw_GetTrWidthInBytes(pConfig->srcMaxTransactionWidth);
+	srcTs = dataLen / srcTrSize;
+	do {
+		pProg->ctl.hi = srcTs & dmacHw_REG_CTL_BLOCK_TS_MASK;
+		pProg = (dmacHw_DESC_t *) pProg->llp;
+	} while (pProg != pHead);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Clears the interrupt
+*
+*  This function clears the DMA channel specific interrupt
+*
+*
+*  @return   void
+*
+*  @note
+*     Must be called under the context of ISR
+*/
+/****************************************************************************/
+void dmacHw_clearInterrupt(dmacHw_HANDLE_t handle	/* [ IN ] DMA Channel handle */
+    ) {
+	dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+
+	dmacHw_TRAN_INT_CLEAR(pCblk->module, pCblk->channel);
+	dmacHw_BLOCK_INT_CLEAR(pCblk->module, pCblk->channel);
+	dmacHw_ERROR_INT_CLEAR(pCblk->module, pCblk->channel);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Returns the cause of channel specific DMA interrupt
+*
+*  This function returns the cause of interrupt
+*
+*  @return  Interrupt status, each bit representing a specific type of interrupt
+*
+*  @note
+*     Should be called under the context of ISR
+*/
+/****************************************************************************/
+dmacHw_INTERRUPT_STATUS_e dmacHw_getInterruptStatus(dmacHw_HANDLE_t handle	/* [ IN ] DMA Channel handle */
+    ) {
+	dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+	dmacHw_INTERRUPT_STATUS_e status = dmacHw_INTERRUPT_STATUS_NONE;
+
+	if (dmacHw_REG_INT_STAT_TRAN(pCblk->module) &
+	    ((0x00000001 << pCblk->channel))) {
+		status |= dmacHw_INTERRUPT_STATUS_TRANS;
+	}
+	if (dmacHw_REG_INT_STAT_BLOCK(pCblk->module) &
+	    ((0x00000001 << pCblk->channel))) {
+		status |= dmacHw_INTERRUPT_STATUS_BLOCK;
+	}
+	if (dmacHw_REG_INT_STAT_ERROR(pCblk->module) &
+	    ((0x00000001 << pCblk->channel))) {
+		status |= dmacHw_INTERRUPT_STATUS_ERROR;
+	}
+
+	return status;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Indentifies a DMA channel causing interrupt
+*
+*  This functions returns a channel causing interrupt of type dmacHw_INTERRUPT_STATUS_e
+*
+*  @return  NULL   : No channel causing DMA interrupt
+*           ! NULL : Handle to a channel causing DMA interrupt
+*  @note
+*     dmacHw_clearInterrupt() must be called with a valid handle after calling this function
+*/
+/****************************************************************************/
+dmacHw_HANDLE_t dmacHw_getInterruptSource(void)
+{
+	uint32_t i;
+
+	for (i = 0; i < dmaChannelCount_0 + dmaChannelCount_1; i++) {
+		if ((dmacHw_REG_INT_STAT_TRAN(dmacHw_gCblk[i].module) &
+		     ((0x00000001 << dmacHw_gCblk[i].channel)))
+		    || (dmacHw_REG_INT_STAT_BLOCK(dmacHw_gCblk[i].module) &
+			((0x00000001 << dmacHw_gCblk[i].channel)))
+		    || (dmacHw_REG_INT_STAT_ERROR(dmacHw_gCblk[i].module) &
+			((0x00000001 << dmacHw_gCblk[i].channel)))
+		    ) {
+			return dmacHw_CBLK_TO_HANDLE(&dmacHw_gCblk[i]);
+		}
+	}
+	return dmacHw_CBLK_TO_HANDLE(NULL);
+}
+
+/****************************************************************************/
+/**
+*  @brief  Estimates number of descriptor needed to perform certain DMA transfer
+*
+*
+*  @return  On failure : -1
+*           On success : Number of descriptor count
+*
+*
+*/
+/****************************************************************************/
+int dmacHw_calculateDescriptorCount(dmacHw_CONFIG_t *pConfig,	/*   [ IN ] Configuration settings */
+				    void *pSrcAddr,	/*   [ IN ] Source (Peripheral/Memory) address */
+				    void *pDstAddr,	/*   [ IN ] Destination (Peripheral/Memory) address */
+				    size_t dataLen	/*   [ IN ] Data length in bytes */
+    ) {
+	int srcTs = 0;
+	int oddSize = 0;
+	int descCount = 0;
+	int dstTrSize = 0;
+	int srcTrSize = 0;
+	uint32_t maxBlockSize = dmacHw_MAX_BLOCKSIZE;
+	dmacHw_TRANSACTION_WIDTH_e dstTrWidth;
+	dmacHw_TRANSACTION_WIDTH_e srcTrWidth;
+
+	dstTrSize = dmacHw_GetTrWidthInBytes(pConfig->dstMaxTransactionWidth);
+	srcTrSize = dmacHw_GetTrWidthInBytes(pConfig->srcMaxTransactionWidth);
+
+	/* Skip Tx if buffer is NULL  or length is unknown */
+	if ((pSrcAddr == NULL) || (pDstAddr == NULL) || (dataLen == 0)) {
+		/* Do not initiate transfer */
+		return -1;
+	}
+
+	/* Ensure scatter and gather are transaction aligned */
+	if (pConfig->srcGatherWidth % srcTrSize
+	    || pConfig->dstScatterWidth % dstTrSize) {
+		return -1;
+	}
+
+	/*
+	   Background 1: DMAC can not perform DMA if source and destination addresses are
+	   not properly aligned with the channel's transaction width. So, for successful
+	   DMA transfer, transaction width must be set according to the alignment of the
+	   source and destination address.
+	 */
+
+	/* Adjust destination transaction width if destination address is not aligned properly */
+	dstTrWidth = pConfig->dstMaxTransactionWidth;
+	while (dmacHw_ADDRESS_MASK(dstTrSize) & (uint32_t) pDstAddr) {
+		dstTrWidth = dmacHw_GetNextTrWidth(dstTrWidth);
+		dstTrSize = dmacHw_GetTrWidthInBytes(dstTrWidth);
+	}
+
+	/* Adjust source transaction width if source address is not aligned properly */
+	srcTrWidth = pConfig->srcMaxTransactionWidth;
+	while (dmacHw_ADDRESS_MASK(srcTrSize) & (uint32_t) pSrcAddr) {
+		srcTrWidth = dmacHw_GetNextTrWidth(srcTrWidth);
+		srcTrSize = dmacHw_GetTrWidthInBytes(srcTrWidth);
+	}
+
+	/* Find the maximum transaction per descriptor */
+	if (pConfig->maxDataPerBlock
+	    && ((pConfig->maxDataPerBlock / srcTrSize) <
+		dmacHw_MAX_BLOCKSIZE)) {
+		maxBlockSize = pConfig->maxDataPerBlock / srcTrSize;
+	}
+
+	/* Find number of source transactions needed to complete the DMA transfer */
+	srcTs = dataLen / srcTrSize;
+	/* Find the odd number of bytes that need to be transferred as single byte transaction width */
+	if (srcTs && (dstTrSize > srcTrSize)) {
+		oddSize = dataLen % dstTrSize;
+		/* Adjust source transaction count due to "oddSize" */
+		srcTs = srcTs - (oddSize / srcTrSize);
+	} else {
+		oddSize = dataLen % srcTrSize;
+	}
+	/* Adjust "descCount" due to "oddSize" */
+	if (oddSize) {
+		descCount++;
+	}
+
+	/* Find the number of descriptor needed for total "srcTs" */
+	if (srcTs) {
+		descCount += ((srcTs - 1) / maxBlockSize) + 1;
+	}
+
+	return descCount;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Check the existance of pending descriptor
+*
+*  This function confirmes if there is any pending descriptor in the chain
+*  to program the channel
+*
+*  @return  1 : Channel need to be programmed with pending descriptor
+*           0 : No more pending descriptor to programe the channel
+*
+*  @note
+*     - This function should be called from ISR in case there are pending
+*       descriptor to program the channel.
+*
+*     Example:
+*
+*     dmac_isr ()
+*     {
+*         ...
+*         if (dmacHw_descriptorPending (handle))
+*         {
+*            dmacHw_initiateTransfer (handle);
+*         }
+*     }
+*
+*/
+/****************************************************************************/
+uint32_t dmacHw_descriptorPending(dmacHw_HANDLE_t handle,	/*   [ IN ] DMA Channel handle */
+				  void *pDescriptor	/*   [ IN ] Descriptor buffer */
+    ) {
+	dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+	dmacHw_DESC_RING_t *pRing = dmacHw_GET_DESC_RING(pDescriptor);
+
+	/* Make sure channel is not busy */
+	if (!CHANNEL_BUSY(pCblk->module, pCblk->channel)) {
+		/* Check if pEnd is not processed */
+		if (pRing->pEnd) {
+			/* Something left for processing */
+			return 1;
+		}
+	}
+	return 0;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Program channel register to stop transfer
+*
+*  Ensures the channel is not doing any transfer after calling this function
+*
+*  @return  void
+*
+*/
+/****************************************************************************/
+void dmacHw_stopTransfer(dmacHw_HANDLE_t handle	/*   [ IN ] DMA Channel handle */
+    ) {
+	dmacHw_CBLK_t *pCblk;
+
+	pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+
+	/* Stop the channel */
+	dmacHw_DMA_STOP(pCblk->module, pCblk->channel);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Deallocates source or destination memory, allocated
+*
+*  This function can be called to deallocate data memory that was DMAed successfully
+*
+*  @return  On failure : -1
+*           On success : Number of buffer freed
+*
+*  @note
+*     This function will be called ONLY, when source OR destination address is pointing
+*     to dynamic memory
+*/
+/****************************************************************************/
+int dmacHw_freeMem(dmacHw_CONFIG_t *pConfig,	/*   [ IN ] Configuration settings */
+		   void *pDescriptor,	/*   [ IN ] Descriptor buffer */
+		   void (*fpFree) (void *)	/*   [ IN ] Function pointer to free data memory */
+    ) {
+	dmacHw_DESC_RING_t *pRing = dmacHw_GET_DESC_RING(pDescriptor);
+	uint32_t count = 0;
+
+	if (fpFree == NULL) {
+		return -1;
+	}
+
+	while ((pRing->pFree != pRing->pTail)
+	       && (pRing->pFree->ctl.lo & dmacHw_DESC_FREE)) {
+		if (pRing->pFree->devCtl == dmacHw_FREE_USER_MEMORY) {
+			/* Identify, which memory to free */
+			if (dmacHw_DST_IS_MEMORY(pConfig->transferType)) {
+				(*fpFree) ((void *)pRing->pFree->dar);
+			} else {
+				/* Destination was a peripheral */
+				(*fpFree) ((void *)pRing->pFree->sar);
+			}
+			/* Unmark user memory to indicate it is freed */
+			pRing->pFree->devCtl = ~dmacHw_FREE_USER_MEMORY;
+		}
+		dmacHw_NEXT_DESC(pRing, pFree);
+
+		count++;
+	}
+
+	return count;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Prepares descriptor ring, when source peripheral working as a flow controller
+*
+*  This function will update the discriptor ring by allocating buffers, when source peripheral
+*  has to work as a flow controller to transfer data from:
+*           - Peripheral to memory.
+*
+*  @return  On failure : -1
+*           On success : Number of descriptor updated
+*
+*
+*  @note
+*     Channel must be configured for peripheral to memory transfer
+*
+*/
+/****************************************************************************/
+int dmacHw_setVariableDataDescriptor(dmacHw_HANDLE_t handle,	/*   [ IN ] DMA Channel handle */
+				     dmacHw_CONFIG_t *pConfig,	/*   [ IN ] Configuration settings */
+				     void *pDescriptor,	/*   [ IN ] Descriptor buffer */
+				     uint32_t srcAddr,	/*   [ IN ] Source peripheral address */
+				     void *(*fpAlloc) (int len),	/*   [ IN ] Function pointer  that provides destination memory */
+				     int len,	/*   [ IN ] Number of bytes "fpAlloc" will allocate for destination */
+				     int num	/*   [ IN ] Number of descriptor to set */
+    ) {
+	dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+	dmacHw_DESC_t *pProg = NULL;
+	dmacHw_DESC_t *pLast = NULL;
+	dmacHw_DESC_RING_t *pRing = dmacHw_GET_DESC_RING(pDescriptor);
+	uint32_t dstAddr;
+	uint32_t controlParam;
+	int i;
+
+	dmacHw_ASSERT(pConfig->transferType ==
+		      dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM);
+
+	if (num > pRing->num) {
+		return -1;
+	}
+
+	pLast = pRing->pEnd;	/* Last descriptor updated */
+	pProg = pRing->pHead;	/* First descriptor in the new list */
+
+	controlParam = pConfig->srcUpdate |
+	    pConfig->dstUpdate |
+	    pConfig->srcMaxTransactionWidth |
+	    pConfig->dstMaxTransactionWidth |
+	    pConfig->srcMasterInterface |
+	    pConfig->dstMasterInterface |
+	    pConfig->srcMaxBurstWidth |
+	    pConfig->dstMaxBurstWidth |
+	    dmacHw_REG_CTL_TTFC_PM_PERI |
+	    dmacHw_REG_CTL_LLP_DST_EN |
+	    dmacHw_REG_CTL_LLP_SRC_EN | dmacHw_REG_CTL_INT_EN;
+
+	for (i = 0; i < num; i++) {
+		/* Allocate Rx buffer only for idle descriptor */
+		if (((pRing->pHead->ctl.hi & dmacHw_DESC_FREE) == 0) ||
+		    ((dmacHw_DESC_t *) pRing->pHead->llp == pRing->pTail)
+		    ) {
+			/* Rx descriptor is not idle */
+			break;
+		}
+		/* Set source address */
+		pRing->pHead->sar = srcAddr;
+		if (fpAlloc) {
+			/* Allocate memory for buffer in descriptor */
+			dstAddr = (uint32_t) (*fpAlloc) (len);
+			/* Check the destination address */
+			if (dstAddr == 0) {
+				if (i == 0) {
+					/* Not a single descriptor is available */
+					return -1;
+				}
+				break;
+			}
+			/* Set destination address */
+			pRing->pHead->dar = dstAddr;
+		}
+		/* Set control information */
+		pRing->pHead->ctl.lo = controlParam;
+		/* Use "devCtl" to mark the memory that need to be freed later */
+		pRing->pHead->devCtl = dmacHw_FREE_USER_MEMORY;
+		/* Descriptor is now owned by the channel */
+		pRing->pHead->ctl.hi = 0;
+		/* Remember the descriptor last updated */
+		pRing->pEnd = pRing->pHead;
+		/* Update next descriptor */
+		dmacHw_NEXT_DESC(pRing, pHead);
+	}
+
+	/* Mark the end of the list */
+	pRing->pEnd->ctl.lo &=
+	    ~(dmacHw_REG_CTL_LLP_DST_EN | dmacHw_REG_CTL_LLP_SRC_EN);
+	/* Connect the list */
+	if (pLast != pProg) {
+		pLast->ctl.lo |=
+		    dmacHw_REG_CTL_LLP_DST_EN | dmacHw_REG_CTL_LLP_SRC_EN;
+	}
+	/* Mark the descriptors are updated */
+	pCblk->descUpdated = 1;
+	if (!pCblk->varDataStarted) {
+		/* LLP must be pointing to the first descriptor */
+		dmacHw_SET_LLP(pCblk->module, pCblk->channel,
+			       (uint32_t) pProg - pRing->virt2PhyOffset);
+		/* Channel, handling variable data started */
+		pCblk->varDataStarted = 1;
+	}
+
+	return i;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Read data DMAed to memory
+*
+*  This function will read data that has been DMAed to memory while transfering from:
+*          - Memory to memory
+*          - Peripheral to memory
+*
+*  @param    handle     -
+*  @param    ppBbuf     -
+*  @param    pLen       -
+*
+*  @return  0 - No more data is available to read
+*           1 - More data might be available to read
+*
+*/
+/****************************************************************************/
+int dmacHw_readTransferredData(dmacHw_HANDLE_t handle,	/*  [ IN ] DMA Channel handle */
+			       dmacHw_CONFIG_t *pConfig,	/*   [ IN ]  Configuration settings */
+			       void *pDescriptor,	/*   [ IN ] Descriptor buffer */
+			       void **ppBbuf,	/*   [ OUT ] Data received */
+			       size_t *pLlen	/*   [ OUT ] Length of the data received */
+    ) {
+	dmacHw_DESC_RING_t *pRing = dmacHw_GET_DESC_RING(pDescriptor);
+
+	(void)handle;
+
+	if (pConfig->transferMode != dmacHw_TRANSFER_MODE_CONTINUOUS) {
+		if (((pRing->pTail->ctl.hi & dmacHw_DESC_FREE) == 0) ||
+		    (pRing->pTail == pRing->pHead)
+		    ) {
+			/* No receive data available */
+			*ppBbuf = (char *)NULL;
+			*pLlen = 0;
+
+			return 0;
+		}
+	}
+
+	/* Return read buffer and length */
+	*ppBbuf = (char *)pRing->pTail->dar;
+
+	/* Extract length of the received data */
+	if (DmaIsFlowController(pDescriptor)) {
+		uint32_t srcTrSize = 0;
+
+		switch (pRing->pTail->ctl.lo & dmacHw_REG_CTL_SRC_TR_WIDTH_MASK) {
+		case dmacHw_REG_CTL_SRC_TR_WIDTH_8:
+			srcTrSize = 1;
+			break;
+		case dmacHw_REG_CTL_SRC_TR_WIDTH_16:
+			srcTrSize = 2;
+			break;
+		case dmacHw_REG_CTL_SRC_TR_WIDTH_32:
+			srcTrSize = 4;
+			break;
+		case dmacHw_REG_CTL_SRC_TR_WIDTH_64:
+			srcTrSize = 8;
+			break;
+		default:
+			dmacHw_ASSERT(0);
+		}
+		/* Calculate length from the block size */
+		*pLlen =
+		    (pRing->pTail->ctl.hi & dmacHw_REG_CTL_BLOCK_TS_MASK) *
+		    srcTrSize;
+	} else {
+		/* Extract length from the source peripheral */
+		*pLlen = pRing->pTail->sstat;
+	}
+
+	/* Advance tail to next descriptor */
+	dmacHw_NEXT_DESC(pRing, pTail);
+
+	return 1;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Set descriptor carrying control information
+*
+*  This function will be used to send specific control information to the device
+*  using the DMA channel
+*
+*
+*  @return  -1 - On failure
+*            0 - On success
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+int dmacHw_setControlDescriptor(dmacHw_CONFIG_t *pConfig,	/*   [ IN ] Configuration settings */
+				void *pDescriptor,	/*   [ IN ] Descriptor buffer */
+				uint32_t ctlAddress,	/*   [ IN ] Address of the device control register */
+				uint32_t control	/*   [ IN ] Device control information */
+    ) {
+	dmacHw_DESC_RING_t *pRing = dmacHw_GET_DESC_RING(pDescriptor);
+
+	if (ctlAddress == 0) {
+		return -1;
+	}
+
+	/* Check the availability of descriptors in the ring */
+	if ((pRing->pHead->ctl.hi & dmacHw_DESC_FREE) == 0) {
+		return -1;
+	}
+	/* Set control information */
+	pRing->pHead->devCtl = control;
+	/* Set source and destination address */
+	pRing->pHead->sar = (uint32_t) &pRing->pHead->devCtl;
+	pRing->pHead->dar = ctlAddress;
+	/* Set control parameters */
+	if (pConfig->flowControler == dmacHw_FLOW_CONTROL_DMA) {
+		pRing->pHead->ctl.lo = pConfig->transferType |
+		    dmacHw_SRC_ADDRESS_UPDATE_MODE_INC |
+		    dmacHw_DST_ADDRESS_UPDATE_MODE_INC |
+		    dmacHw_SRC_TRANSACTION_WIDTH_32 |
+		    pConfig->dstMaxTransactionWidth |
+		    dmacHw_SRC_BURST_WIDTH_0 |
+		    dmacHw_DST_BURST_WIDTH_0 |
+		    pConfig->srcMasterInterface |
+		    pConfig->dstMasterInterface | dmacHw_REG_CTL_INT_EN;
+	} else {
+		uint32_t transferType = 0;
+		switch (pConfig->transferType) {
+		case dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM:
+			transferType = dmacHw_REG_CTL_TTFC_PM_PERI;
+			break;
+		case dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL:
+			transferType = dmacHw_REG_CTL_TTFC_MP_PERI;
+			break;
+		default:
+			dmacHw_ASSERT(0);
+		}
+		pRing->pHead->ctl.lo = transferType |
+		    dmacHw_SRC_ADDRESS_UPDATE_MODE_INC |
+		    dmacHw_DST_ADDRESS_UPDATE_MODE_INC |
+		    dmacHw_SRC_TRANSACTION_WIDTH_32 |
+		    pConfig->dstMaxTransactionWidth |
+		    dmacHw_SRC_BURST_WIDTH_0 |
+		    dmacHw_DST_BURST_WIDTH_0 |
+		    pConfig->srcMasterInterface |
+		    pConfig->dstMasterInterface |
+		    pConfig->flowControler | dmacHw_REG_CTL_INT_EN;
+	}
+
+	/* Set block transaction size to one 32 bit transaction */
+	pRing->pHead->ctl.hi = dmacHw_REG_CTL_BLOCK_TS_MASK & 1;
+
+	/* Remember the descriptor to initialize the registers */
+	if (pRing->pProg == dmacHw_DESC_INIT) {
+		pRing->pProg = pRing->pHead;
+	}
+	pRing->pEnd = pRing->pHead;
+
+	/* Advance the descriptor */
+	dmacHw_NEXT_DESC(pRing, pHead);
+
+	/* Update Tail pointer if destination is a peripheral */
+	if (!dmacHw_DST_IS_MEMORY(pConfig->transferType)) {
+		pRing->pTail = pRing->pHead;
+	}
+	return 0;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Sets channel specific user data
+*
+*  This function associates user data to a specif DMA channel
+*
+*/
+/****************************************************************************/
+void dmacHw_setChannelUserData(dmacHw_HANDLE_t handle,	/*  [ IN ] DMA Channel handle */
+			       void *userData	/*  [ IN ] User data */
+    ) {
+	dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+
+	pCblk->userData = userData;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Gets channel specific user data
+*
+*  This function returns user data specific to a DMA channel
+*
+*  @return   user data
+*/
+/****************************************************************************/
+void *dmacHw_getChannelUserData(dmacHw_HANDLE_t handle	/*  [ IN ] DMA Channel handle */
+    ) {
+	dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+
+	return pCblk->userData;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Resets descriptor control information
+*
+*  @return  void
+*/
+/****************************************************************************/
+void dmacHw_resetDescriptorControl(void *pDescriptor	/*   [ IN ] Descriptor buffer  */
+    ) {
+	int i;
+	dmacHw_DESC_RING_t *pRing;
+	dmacHw_DESC_t *pDesc;
+
+	pRing = dmacHw_GET_DESC_RING(pDescriptor);
+	pDesc = pRing->pHead;
+
+	for (i = 0; i < pRing->num; i++) {
+		/* Mark descriptor is ready to use */
+		pDesc->ctl.hi = dmacHw_DESC_FREE;
+		/* Look into next link list item */
+		pDesc++;
+	}
+	pRing->pFree = pRing->pTail = pRing->pEnd = pRing->pHead;
+	pRing->pProg = dmacHw_DESC_INIT;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Displays channel specific registers and other control parameters
+*
+*  @return  void
+*
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+void dmacHw_printDebugInfo(dmacHw_HANDLE_t handle,	/*  [ IN ] DMA Channel handle */
+			   void *pDescriptor,	/*   [ IN ] Descriptor buffer */
+			   int (*fpPrint) (const char *, ...)	/*  [ IN ] Print callback function */
+    ) {
+	dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+
+	DisplayRegisterContents(pCblk->module, pCblk->channel, fpPrint);
+	DisplayDescRing(pDescriptor, fpPrint);
+}
diff --git a/arch/arm/mach-bcmring/csp/tmr/Makefile b/arch/arm/mach-bcmring/csp/tmr/Makefile
new file mode 100644
index 000000000000..244a61ab7697
--- /dev/null
+++ b/arch/arm/mach-bcmring/csp/tmr/Makefile
@@ -0,0 +1 @@
+obj-y += tmrHw.o
diff --git a/arch/arm/mach-bcmring/csp/tmr/tmrHw.c b/arch/arm/mach-bcmring/csp/tmr/tmrHw.c
new file mode 100644
index 000000000000..5c1c9a0e5ed2
--- /dev/null
+++ b/arch/arm/mach-bcmring/csp/tmr/tmrHw.c
@@ -0,0 +1,576 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*  @file    tmrHw.c
+*
+*  @brief   Low level Timer driver routines
+*
+*  @note
+*
+*   These routines provide basic timer functionality only.
+*/
+/****************************************************************************/
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#include <csp/errno.h>
+#include <csp/stdint.h>
+
+#include <csp/tmrHw.h>
+#include <mach/csp/tmrHw_reg.h>
+
+#define tmrHw_ASSERT(a)                     if (!(a)) *(char *)0 = 0
+#define tmrHw_MILLISEC_PER_SEC              (1000)
+
+#define tmrHw_LOW_1_RESOLUTION_COUNT        (tmrHw_LOW_RESOLUTION_CLOCK / tmrHw_MILLISEC_PER_SEC)
+#define tmrHw_LOW_1_MAX_MILLISEC            (0xFFFFFFFF / tmrHw_LOW_1_RESOLUTION_COUNT)
+#define tmrHw_LOW_16_RESOLUTION_COUNT       (tmrHw_LOW_1_RESOLUTION_COUNT / 16)
+#define tmrHw_LOW_16_MAX_MILLISEC           (0xFFFFFFFF / tmrHw_LOW_16_RESOLUTION_COUNT)
+#define tmrHw_LOW_256_RESOLUTION_COUNT      (tmrHw_LOW_1_RESOLUTION_COUNT / 256)
+#define tmrHw_LOW_256_MAX_MILLISEC          (0xFFFFFFFF / tmrHw_LOW_256_RESOLUTION_COUNT)
+
+#define tmrHw_HIGH_1_RESOLUTION_COUNT       (tmrHw_HIGH_RESOLUTION_CLOCK / tmrHw_MILLISEC_PER_SEC)
+#define tmrHw_HIGH_1_MAX_MILLISEC           (0xFFFFFFFF / tmrHw_HIGH_1_RESOLUTION_COUNT)
+#define tmrHw_HIGH_16_RESOLUTION_COUNT      (tmrHw_HIGH_1_RESOLUTION_COUNT / 16)
+#define tmrHw_HIGH_16_MAX_MILLISEC          (0xFFFFFFFF / tmrHw_HIGH_16_RESOLUTION_COUNT)
+#define tmrHw_HIGH_256_RESOLUTION_COUNT     (tmrHw_HIGH_1_RESOLUTION_COUNT / 256)
+#define tmrHw_HIGH_256_MAX_MILLISEC         (0xFFFFFFFF / tmrHw_HIGH_256_RESOLUTION_COUNT)
+
+static void ResetTimer(tmrHw_ID_t timerId)
+    __attribute__ ((section(".aramtext")));
+static int tmrHw_divide(int num, int denom)
+    __attribute__ ((section(".aramtext")));
+
+/****************************************************************************/
+/**
+*  @brief   Get timer capability
+*
+*  This function returns various capabilities/attributes of a timer
+*
+*  @return  Capability
+*
+*/
+/****************************************************************************/
+uint32_t tmrHw_getTimerCapability(tmrHw_ID_t timerId,	/*  [ IN ] Timer Id */
+				  tmrHw_CAPABILITY_e capability	/*  [ IN ] Timer capability */
+) {
+	switch (capability) {
+	case tmrHw_CAPABILITY_CLOCK:
+		return (timerId <=
+			1) ? tmrHw_LOW_RESOLUTION_CLOCK :
+		    tmrHw_HIGH_RESOLUTION_CLOCK;
+	case tmrHw_CAPABILITY_RESOLUTION:
+		return 32;
+	default:
+		return 0;
+	}
+	return 0;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Resets a timer
+*
+*  This function initializes  timer
+*
+*  @return  void
+*
+*/
+/****************************************************************************/
+static void ResetTimer(tmrHw_ID_t timerId	/*  [ IN ] Timer Id */
+) {
+	/* Reset timer */
+	pTmrHw[timerId].LoadValue = 0;
+	pTmrHw[timerId].CurrentValue = 0xFFFFFFFF;
+	pTmrHw[timerId].Control = 0;
+	pTmrHw[timerId].BackgroundLoad = 0;
+	/* Always configure as a 32 bit timer */
+	pTmrHw[timerId].Control |= tmrHw_CONTROL_32BIT;
+	/* Clear interrupt only if raw status interrupt is set */
+	if (pTmrHw[timerId].RawInterruptStatus) {
+		pTmrHw[timerId].InterruptClear = 0xFFFFFFFF;
+	}
+}
+
+/****************************************************************************/
+/**
+*  @brief   Sets counter value for an interval in ms
+*
+*  @return   On success: Effective counter value set
+*            On failure: 0
+*
+*/
+/****************************************************************************/
+static tmrHw_INTERVAL_t SetTimerPeriod(tmrHw_ID_t timerId,	/*  [ IN ] Timer Id */
+				       tmrHw_INTERVAL_t msec	/*  [ IN ] Interval in milli-second */
+) {
+	uint32_t scale = 0;
+	uint32_t count = 0;
+
+	if (timerId == 0 || timerId == 1) {
+		if (msec <= tmrHw_LOW_1_MAX_MILLISEC) {
+			pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_1;
+			scale = tmrHw_LOW_1_RESOLUTION_COUNT;
+		} else if (msec <= tmrHw_LOW_16_MAX_MILLISEC) {
+			pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_16;
+			scale = tmrHw_LOW_16_RESOLUTION_COUNT;
+		} else if (msec <= tmrHw_LOW_256_MAX_MILLISEC) {
+			pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_256;
+			scale = tmrHw_LOW_256_RESOLUTION_COUNT;
+		} else {
+			return 0;
+		}
+
+		count = msec * scale;
+		/* Set counter value */
+		pTmrHw[timerId].LoadValue = count;
+		pTmrHw[timerId].BackgroundLoad = count;
+
+	} else if (timerId == 2 || timerId == 3) {
+		if (msec <= tmrHw_HIGH_1_MAX_MILLISEC) {
+			pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_1;
+			scale = tmrHw_HIGH_1_RESOLUTION_COUNT;
+		} else if (msec <= tmrHw_HIGH_16_MAX_MILLISEC) {
+			pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_16;
+			scale = tmrHw_HIGH_16_RESOLUTION_COUNT;
+		} else if (msec <= tmrHw_HIGH_256_MAX_MILLISEC) {
+			pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_256;
+			scale = tmrHw_HIGH_256_RESOLUTION_COUNT;
+		} else {
+			return 0;
+		}
+
+		count = msec * scale;
+		/* Set counter value */
+		pTmrHw[timerId].LoadValue = count;
+		pTmrHw[timerId].BackgroundLoad = count;
+	}
+	return count / scale;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Configures a periodic timer in terms of timer interrupt rate
+*
+*  This function initializes a periodic timer to generate specific number of
+*  timer interrupt per second
+*
+*  @return   On success: Effective timer frequency
+*            On failure: 0
+*
+*/
+/****************************************************************************/
+tmrHw_RATE_t tmrHw_setPeriodicTimerRate(tmrHw_ID_t timerId,	/*  [ IN ] Timer Id */
+					tmrHw_RATE_t rate	/*  [ IN ] Number of timer interrupt per second */
+) {
+	uint32_t resolution = 0;
+	uint32_t count = 0;
+	ResetTimer(timerId);
+
+	/* Set timer mode periodic */
+	pTmrHw[timerId].Control |= tmrHw_CONTROL_PERIODIC;
+	pTmrHw[timerId].Control &= ~tmrHw_CONTROL_ONESHOT;
+	/* Set timer in highest resolution */
+	pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_1;
+
+	if (rate && (timerId == 0 || timerId == 1)) {
+		if (rate > tmrHw_LOW_RESOLUTION_CLOCK) {
+			return 0;
+		}
+		resolution = tmrHw_LOW_RESOLUTION_CLOCK;
+	} else if (rate && (timerId == 2 || timerId == 3)) {
+		if (rate > tmrHw_HIGH_RESOLUTION_CLOCK) {
+			return 0;
+		} else {
+			resolution = tmrHw_HIGH_RESOLUTION_CLOCK;
+		}
+	} else {
+		return 0;
+	}
+	/* Find the counter value */
+	count = resolution / rate;
+	/* Set counter value */
+	pTmrHw[timerId].LoadValue = count;
+	pTmrHw[timerId].BackgroundLoad = count;
+
+	return resolution / count;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Configures a periodic timer to generate timer interrupt after
+*           certain time interval
+*
+*  This function initializes a periodic timer to generate timer interrupt
+*  after every time interval in millisecond
+*
+*  @return   On success: Effective interval set in milli-second
+*            On failure: 0
+*
+*/
+/****************************************************************************/
+tmrHw_INTERVAL_t tmrHw_setPeriodicTimerInterval(tmrHw_ID_t timerId,	/*  [ IN ] Timer Id */
+						tmrHw_INTERVAL_t msec	/*  [ IN ] Interval in milli-second */
+) {
+	ResetTimer(timerId);
+
+	/* Set timer mode periodic */
+	pTmrHw[timerId].Control |= tmrHw_CONTROL_PERIODIC;
+	pTmrHw[timerId].Control &= ~tmrHw_CONTROL_ONESHOT;
+
+	return SetTimerPeriod(timerId, msec);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Configures a periodic timer to generate timer interrupt just once
+*           after certain time interval
+*
+*  This function initializes a periodic timer to generate a single ticks after
+*  certain time interval in millisecond
+*
+*  @return   On success: Effective interval set in milli-second
+*            On failure: 0
+*
+*/
+/****************************************************************************/
+tmrHw_INTERVAL_t tmrHw_setOneshotTimerInterval(tmrHw_ID_t timerId,	/*  [ IN ] Timer Id */
+					       tmrHw_INTERVAL_t msec	/*  [ IN ] Interval in milli-second */
+) {
+	ResetTimer(timerId);
+
+	/* Set timer mode oneshot */
+	pTmrHw[timerId].Control |= tmrHw_CONTROL_PERIODIC;
+	pTmrHw[timerId].Control |= tmrHw_CONTROL_ONESHOT;
+
+	return SetTimerPeriod(timerId, msec);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Configures a timer to run as a free running timer
+*
+*  This function initializes a timer to run as a free running timer
+*
+*  @return   Timer resolution (count / sec)
+*
+*/
+/****************************************************************************/
+tmrHw_RATE_t tmrHw_setFreeRunningTimer(tmrHw_ID_t timerId,	/*  [ IN ] Timer Id */
+				       uint32_t divider	/*  [ IN ] Dividing the clock frequency */
+) {
+	uint32_t scale = 0;
+
+	ResetTimer(timerId);
+	/* Set timer as free running mode */
+	pTmrHw[timerId].Control &= ~tmrHw_CONTROL_PERIODIC;
+	pTmrHw[timerId].Control &= ~tmrHw_CONTROL_ONESHOT;
+
+	if (divider >= 64) {
+		pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_256;
+		scale = 256;
+	} else if (divider >= 8) {
+		pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_16;
+		scale = 16;
+	} else {
+		pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_1;
+		scale = 1;
+	}
+
+	if (timerId == 0 || timerId == 1) {
+		return tmrHw_divide(tmrHw_LOW_RESOLUTION_CLOCK, scale);
+	} else if (timerId == 2 || timerId == 3) {
+		return tmrHw_divide(tmrHw_HIGH_RESOLUTION_CLOCK, scale);
+	}
+
+	return 0;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Starts a timer
+*
+*  This function starts a preconfigured timer
+*
+*  @return  -1     - On Failure
+*            0     - On Success
+*
+*/
+/****************************************************************************/
+int tmrHw_startTimer(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
+) {
+	pTmrHw[timerId].Control |= tmrHw_CONTROL_TIMER_ENABLE;
+	return 0;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Stops a timer
+*
+*  This function stops a running timer
+*
+*  @return  -1     - On Failure
+*            0     - On Success
+*
+*/
+/****************************************************************************/
+int tmrHw_stopTimer(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
+) {
+	pTmrHw[timerId].Control &= ~tmrHw_CONTROL_TIMER_ENABLE;
+	return 0;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Gets current timer count
+*
+*  This function returns the current timer value
+*
+*  @return  Current downcounting timer value
+*
+*/
+/****************************************************************************/
+uint32_t tmrHw_GetCurrentCount(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
+) {
+	/* return 32 bit timer value */
+	switch (pTmrHw[timerId].Control & tmrHw_CONTROL_MODE_MASK) {
+	case tmrHw_CONTROL_FREE_RUNNING:
+		if (pTmrHw[timerId].CurrentValue) {
+			return tmrHw_MAX_COUNT - pTmrHw[timerId].CurrentValue;
+		}
+		break;
+	case tmrHw_CONTROL_PERIODIC:
+	case tmrHw_CONTROL_ONESHOT:
+		return pTmrHw[timerId].BackgroundLoad -
+		    pTmrHw[timerId].CurrentValue;
+	}
+	return 0;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Gets timer count rate
+*
+*  This function returns the number of counts per second
+*
+*  @return  Count rate
+*
+*/
+/****************************************************************************/
+tmrHw_RATE_t tmrHw_getCountRate(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
+) {
+	uint32_t divider = 0;
+
+	switch (pTmrHw[timerId].Control & tmrHw_CONTROL_PRESCALE_MASK) {
+	case tmrHw_CONTROL_PRESCALE_1:
+		divider = 1;
+		break;
+	case tmrHw_CONTROL_PRESCALE_16:
+		divider = 16;
+		break;
+	case tmrHw_CONTROL_PRESCALE_256:
+		divider = 256;
+		break;
+	default:
+		tmrHw_ASSERT(0);
+	}
+
+	if (timerId == 0 || timerId == 1) {
+		return tmrHw_divide(tmrHw_LOW_RESOLUTION_CLOCK, divider);
+	} else {
+		return tmrHw_divide(tmrHw_HIGH_RESOLUTION_CLOCK, divider);
+	}
+	return 0;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Enables timer interrupt
+*
+*  This function enables the timer interrupt
+*
+*  @return   N/A
+*
+*/
+/****************************************************************************/
+void tmrHw_enableInterrupt(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
+) {
+	pTmrHw[timerId].Control |= tmrHw_CONTROL_INTERRUPT_ENABLE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Disables timer interrupt
+*
+*  This function disable the timer interrupt
+*
+*  @return   N/A
+*
+*/
+/****************************************************************************/
+void tmrHw_disableInterrupt(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
+) {
+	pTmrHw[timerId].Control &= ~tmrHw_CONTROL_INTERRUPT_ENABLE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Clears the interrupt
+*
+*  This function clears the timer interrupt
+*
+*  @return   N/A
+*
+*  @note
+*     Must be called under the context of ISR
+*/
+/****************************************************************************/
+void tmrHw_clearInterrupt(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
+) {
+	pTmrHw[timerId].InterruptClear = 0x1;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Gets the interrupt status
+*
+*  This function returns timer interrupt status
+*
+*  @return   Interrupt status
+*/
+/****************************************************************************/
+tmrHw_INTERRUPT_STATUS_e tmrHw_getInterruptStatus(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
+) {
+	if (pTmrHw[timerId].InterruptStatus) {
+		return tmrHw_INTERRUPT_STATUS_SET;
+	} else {
+		return tmrHw_INTERRUPT_STATUS_UNSET;
+	}
+}
+
+/****************************************************************************/
+/**
+*  @brief   Indentifies a timer causing interrupt
+*
+*  This functions returns a timer causing interrupt
+*
+*  @return  0xFFFFFFFF   : No timer causing an interrupt
+*           ! 0xFFFFFFFF : timer causing an interrupt
+*  @note
+*     tmrHw_clearIntrrupt() must be called with a valid timer id after calling this function
+*/
+/****************************************************************************/
+tmrHw_ID_t tmrHw_getInterruptSource(void	/*  void */
+) {
+	int i;
+
+	for (i = 0; i < tmrHw_TIMER_NUM_COUNT; i++) {
+		if (pTmrHw[i].InterruptStatus) {
+			return i;
+		}
+	}
+
+	return 0xFFFFFFFF;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Displays specific timer registers
+*
+*
+*  @return  void
+*
+*/
+/****************************************************************************/
+void tmrHw_printDebugInfo(tmrHw_ID_t timerId,	/*  [ IN ] Timer id */
+			  int (*fpPrint) (const char *, ...)	/*  [ IN ] Print callback function */
+) {
+	(*fpPrint) ("Displaying register contents \n\n");
+	(*fpPrint) ("Timer %d: Load value              0x%X\n", timerId,
+		    pTmrHw[timerId].LoadValue);
+	(*fpPrint) ("Timer %d: Background load value   0x%X\n", timerId,
+		    pTmrHw[timerId].BackgroundLoad);
+	(*fpPrint) ("Timer %d: Control                 0x%X\n", timerId,
+		    pTmrHw[timerId].Control);
+	(*fpPrint) ("Timer %d: Interrupt clear         0x%X\n", timerId,
+		    pTmrHw[timerId].InterruptClear);
+	(*fpPrint) ("Timer %d: Interrupt raw interrupt 0x%X\n", timerId,
+		    pTmrHw[timerId].RawInterruptStatus);
+	(*fpPrint) ("Timer %d: Interrupt status        0x%X\n", timerId,
+		    pTmrHw[timerId].InterruptStatus);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Use a timer to perform a busy wait delay for a number of usecs.
+*
+*  @return   N/A
+*/
+/****************************************************************************/
+void tmrHw_udelay(tmrHw_ID_t timerId,	/*  [ IN ] Timer id */
+		  unsigned long usecs /*  [ IN ] usec to delay */
+) {
+	tmrHw_RATE_t usec_tick_rate;
+	tmrHw_COUNT_t start_time;
+	tmrHw_COUNT_t delta_time;
+
+	start_time = tmrHw_GetCurrentCount(timerId);
+	usec_tick_rate = tmrHw_divide(tmrHw_getCountRate(timerId), 1000000);
+	delta_time = usecs * usec_tick_rate;
+
+	/* Busy wait */
+	while (delta_time > (tmrHw_GetCurrentCount(timerId) - start_time))
+		;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Local Divide function
+*
+*  This function does the divide
+*
+*  @return divide value
+*
+*/
+/****************************************************************************/
+static int tmrHw_divide(int num, int denom)
+{
+	int r;
+	int t = 1;
+
+	/* Shift denom and t up to the largest value to optimize algorithm */
+	/* t contains the units of each divide */
+	while ((denom & 0x40000000) == 0) {	/* fails if denom=0 */
+		denom = denom << 1;
+		t = t << 1;
+	}
+
+	/* Intialize the result */
+	r = 0;
+
+	do {
+		/* Determine if there exists a positive remainder */
+		if ((num - denom) >= 0) {
+			/* Accumlate t to the result and calculate a new remainder */
+			num = num - denom;
+			r = r + t;
+		}
+		/* Continue to shift denom and shift t down to 0 */
+		denom = denom >> 1;
+		t = t >> 1;
+	} while (t != 0);
+	return r;
+}
diff --git a/arch/arm/mach-bcmring/dma.c b/arch/arm/mach-bcmring/dma.c
new file mode 100644
index 000000000000..7b20fccb9d4e
--- /dev/null
+++ b/arch/arm/mach-bcmring/dma.c
@@ -0,0 +1,2321 @@
+/*****************************************************************************
+* Copyright 2004 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*   @file   dma.c
+*
+*   @brief  Implements the DMA interface.
+*/
+/****************************************************************************/
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/interrupt.h>
+#include <linux/irqreturn.h>
+#include <linux/proc_fs.h>
+
+#include <mach/timer.h>
+
+#include <linux/mm.h>
+#include <linux/pfn.h>
+#include <asm/atomic.h>
+#include <mach/dma.h>
+
+/* I don't quite understand why dc4 fails when this is set to 1 and DMA is enabled */
+/* especially since dc4 doesn't use kmalloc'd memory. */
+
+#define ALLOW_MAP_OF_KMALLOC_MEMORY 0
+
+/* ---- Public Variables ------------------------------------------------- */
+
+/* ---- Private Constants and Types -------------------------------------- */
+
+#define MAKE_HANDLE(controllerIdx, channelIdx)    (((controllerIdx) << 4) | (channelIdx))
+
+#define CONTROLLER_FROM_HANDLE(handle)    (((handle) >> 4) & 0x0f)
+#define CHANNEL_FROM_HANDLE(handle)       ((handle) & 0x0f)
+
+#define DMA_MAP_DEBUG   0
+
+#if DMA_MAP_DEBUG
+#   define  DMA_MAP_PRINT(fmt, args...)   printk("%s: " fmt, __func__,  ## args)
+#else
+#   define  DMA_MAP_PRINT(fmt, args...)
+#endif
+
+/* ---- Private Variables ------------------------------------------------ */
+
+static DMA_Global_t gDMA;
+static struct proc_dir_entry *gDmaDir;
+
+static atomic_t gDmaStatMemTypeKmalloc = ATOMIC_INIT(0);
+static atomic_t gDmaStatMemTypeVmalloc = ATOMIC_INIT(0);
+static atomic_t gDmaStatMemTypeUser = ATOMIC_INIT(0);
+static atomic_t gDmaStatMemTypeCoherent = ATOMIC_INIT(0);
+
+#include "dma_device.c"
+
+/* ---- Private Function Prototypes -------------------------------------- */
+
+/* ---- Functions  ------------------------------------------------------- */
+
+/****************************************************************************/
+/**
+*   Displays information for /proc/dma/mem-type
+*/
+/****************************************************************************/
+
+static int dma_proc_read_mem_type(char *buf, char **start, off_t offset,
+				  int count, int *eof, void *data)
+{
+	int len = 0;
+
+	len += sprintf(buf + len, "dma_map_mem statistics\n");
+	len +=
+	    sprintf(buf + len, "coherent: %d\n",
+		    atomic_read(&gDmaStatMemTypeCoherent));
+	len +=
+	    sprintf(buf + len, "kmalloc:  %d\n",
+		    atomic_read(&gDmaStatMemTypeKmalloc));
+	len +=
+	    sprintf(buf + len, "vmalloc:  %d\n",
+		    atomic_read(&gDmaStatMemTypeVmalloc));
+	len +=
+	    sprintf(buf + len, "user:     %d\n",
+		    atomic_read(&gDmaStatMemTypeUser));
+
+	return len;
+}
+
+/****************************************************************************/
+/**
+*   Displays information for /proc/dma/channels
+*/
+/****************************************************************************/
+
+static int dma_proc_read_channels(char *buf, char **start, off_t offset,
+				  int count, int *eof, void *data)
+{
+	int controllerIdx;
+	int channelIdx;
+	int limit = count - 200;
+	int len = 0;
+	DMA_Channel_t *channel;
+
+	if (down_interruptible(&gDMA.lock) < 0) {
+		return -ERESTARTSYS;
+	}
+
+	for (controllerIdx = 0; controllerIdx < DMA_NUM_CONTROLLERS;
+	     controllerIdx++) {
+		for (channelIdx = 0; channelIdx < DMA_NUM_CHANNELS;
+		     channelIdx++) {
+			if (len >= limit) {
+				break;
+			}
+
+			channel =
+			    &gDMA.controller[controllerIdx].channel[channelIdx];
+
+			len +=
+			    sprintf(buf + len, "%d:%d ", controllerIdx,
+				    channelIdx);
+
+			if ((channel->flags & DMA_CHANNEL_FLAG_IS_DEDICATED) !=
+			    0) {
+				len +=
+				    sprintf(buf + len, "Dedicated for %s ",
+					    DMA_gDeviceAttribute[channel->
+								 devType].name);
+			} else {
+				len += sprintf(buf + len, "Shared ");
+			}
+
+			if ((channel->flags & DMA_CHANNEL_FLAG_NO_ISR) != 0) {
+				len += sprintf(buf + len, "No ISR ");
+			}
+
+			if ((channel->flags & DMA_CHANNEL_FLAG_LARGE_FIFO) != 0) {
+				len += sprintf(buf + len, "Fifo: 128 ");
+			} else {
+				len += sprintf(buf + len, "Fifo: 64  ");
+			}
+
+			if ((channel->flags & DMA_CHANNEL_FLAG_IN_USE) != 0) {
+				len +=
+				    sprintf(buf + len, "InUse by %s",
+					    DMA_gDeviceAttribute[channel->
+								 devType].name);
+#if (DMA_DEBUG_TRACK_RESERVATION)
+				len +=
+				    sprintf(buf + len, " (%s:%d)",
+					    channel->fileName,
+					    channel->lineNum);
+#endif
+			} else {
+				len += sprintf(buf + len, "Avail ");
+			}
+
+			if (channel->lastDevType != DMA_DEVICE_NONE) {
+				len +=
+				    sprintf(buf + len, "Last use: %s ",
+					    DMA_gDeviceAttribute[channel->
+								 lastDevType].
+					    name);
+			}
+
+			len += sprintf(buf + len, "\n");
+		}
+	}
+	up(&gDMA.lock);
+	*eof = 1;
+
+	return len;
+}
+
+/****************************************************************************/
+/**
+*   Displays information for /proc/dma/devices
+*/
+/****************************************************************************/
+
+static int dma_proc_read_devices(char *buf, char **start, off_t offset,
+				 int count, int *eof, void *data)
+{
+	int limit = count - 200;
+	int len = 0;
+	int devIdx;
+
+	if (down_interruptible(&gDMA.lock) < 0) {
+		return -ERESTARTSYS;
+	}
+
+	for (devIdx = 0; devIdx < DMA_NUM_DEVICE_ENTRIES; devIdx++) {
+		DMA_DeviceAttribute_t *devAttr = &DMA_gDeviceAttribute[devIdx];
+
+		if (devAttr->name == NULL) {
+			continue;
+		}
+
+		if (len >= limit) {
+			break;
+		}
+
+		len += sprintf(buf + len, "%-12s ", devAttr->name);
+
+		if ((devAttr->flags & DMA_DEVICE_FLAG_IS_DEDICATED) != 0) {
+			len +=
+			    sprintf(buf + len, "Dedicated %d:%d ",
+				    devAttr->dedicatedController,
+				    devAttr->dedicatedChannel);
+		} else {
+			len += sprintf(buf + len, "Shared DMA:");
+			if ((devAttr->flags & DMA_DEVICE_FLAG_ON_DMA0) != 0) {
+				len += sprintf(buf + len, "0");
+			}
+			if ((devAttr->flags & DMA_DEVICE_FLAG_ON_DMA1) != 0) {
+				len += sprintf(buf + len, "1");
+			}
+			len += sprintf(buf + len, " ");
+		}
+		if ((devAttr->flags & DMA_DEVICE_FLAG_NO_ISR) != 0) {
+			len += sprintf(buf + len, "NoISR ");
+		}
+		if ((devAttr->flags & DMA_DEVICE_FLAG_ALLOW_LARGE_FIFO) != 0) {
+			len += sprintf(buf + len, "Allow-128 ");
+		}
+
+		len +=
+		    sprintf(buf + len,
+			    "Xfer #: %Lu Ticks: %Lu Bytes: %Lu DescLen: %u\n",
+			    devAttr->numTransfers, devAttr->transferTicks,
+			    devAttr->transferBytes,
+			    devAttr->ring.bytesAllocated);
+
+	}
+
+	up(&gDMA.lock);
+	*eof = 1;
+
+	return len;
+}
+
+/****************************************************************************/
+/**
+*   Determines if a DMA_Device_t is "valid".
+*
+*   @return
+*       TRUE        - dma device is valid
+*       FALSE       - dma device isn't valid
+*/
+/****************************************************************************/
+
+static inline int IsDeviceValid(DMA_Device_t device)
+{
+	return (device >= 0) && (device < DMA_NUM_DEVICE_ENTRIES);
+}
+
+/****************************************************************************/
+/**
+*   Translates a DMA handle into a pointer to a channel.
+*
+*   @return
+*       non-NULL    - pointer to DMA_Channel_t
+*       NULL        - DMA Handle was invalid
+*/
+/****************************************************************************/
+
+static inline DMA_Channel_t *HandleToChannel(DMA_Handle_t handle)
+{
+	int controllerIdx;
+	int channelIdx;
+
+	controllerIdx = CONTROLLER_FROM_HANDLE(handle);
+	channelIdx = CHANNEL_FROM_HANDLE(handle);
+
+	if ((controllerIdx > DMA_NUM_CONTROLLERS)
+	    || (channelIdx > DMA_NUM_CHANNELS)) {
+		return NULL;
+	}
+	return &gDMA.controller[controllerIdx].channel[channelIdx];
+}
+
+/****************************************************************************/
+/**
+*   Interrupt handler which is called to process DMA interrupts.
+*/
+/****************************************************************************/
+
+static irqreturn_t dma_interrupt_handler(int irq, void *dev_id)
+{
+	DMA_Channel_t *channel;
+	DMA_DeviceAttribute_t *devAttr;
+	int irqStatus;
+
+	channel = (DMA_Channel_t *) dev_id;
+
+	/* Figure out why we were called, and knock down the interrupt */
+
+	irqStatus = dmacHw_getInterruptStatus(channel->dmacHwHandle);
+	dmacHw_clearInterrupt(channel->dmacHwHandle);
+
+	if ((channel->devType < 0)
+	    || (channel->devType > DMA_NUM_DEVICE_ENTRIES)) {
+		printk(KERN_ERR "dma_interrupt_handler: Invalid devType: %d\n",
+		       channel->devType);
+		return IRQ_NONE;
+	}
+	devAttr = &DMA_gDeviceAttribute[channel->devType];
+
+	/* Update stats */
+
+	if ((irqStatus & dmacHw_INTERRUPT_STATUS_TRANS) != 0) {
+		devAttr->transferTicks +=
+		    (timer_get_tick_count() - devAttr->transferStartTime);
+	}
+
+	if ((irqStatus & dmacHw_INTERRUPT_STATUS_ERROR) != 0) {
+		printk(KERN_ERR
+		       "dma_interrupt_handler: devType :%d DMA error (%s)\n",
+		       channel->devType, devAttr->name);
+	} else {
+		devAttr->numTransfers++;
+		devAttr->transferBytes += devAttr->numBytes;
+	}
+
+	/* Call any installed handler */
+
+	if (devAttr->devHandler != NULL) {
+		devAttr->devHandler(channel->devType, irqStatus,
+				    devAttr->userData);
+	}
+
+	return IRQ_HANDLED;
+}
+
+/****************************************************************************/
+/**
+*   Allocates memory to hold a descriptor ring. The descriptor ring then
+*   needs to be populated by making one or more calls to
+*   dna_add_descriptors.
+*
+*   The returned descriptor ring will be automatically initialized.
+*
+*   @return
+*       0           Descriptor ring was allocated successfully
+*       -EINVAL     Invalid parameters passed in
+*       -ENOMEM     Unable to allocate memory for the desired number of descriptors.
+*/
+/****************************************************************************/
+
+int dma_alloc_descriptor_ring(DMA_DescriptorRing_t *ring,	/* Descriptor ring to populate */
+			      int numDescriptors	/* Number of descriptors that need to be allocated. */
+    ) {
+	size_t bytesToAlloc = dmacHw_descriptorLen(numDescriptors);
+
+	if ((ring == NULL) || (numDescriptors <= 0)) {
+		return -EINVAL;
+	}
+
+	ring->physAddr = 0;
+	ring->descriptorsAllocated = 0;
+	ring->bytesAllocated = 0;
+
+	ring->virtAddr = dma_alloc_writecombine(NULL,
+						     bytesToAlloc,
+						     &ring->physAddr,
+						     GFP_KERNEL);
+	if (ring->virtAddr == NULL) {
+		return -ENOMEM;
+	}
+
+	ring->bytesAllocated = bytesToAlloc;
+	ring->descriptorsAllocated = numDescriptors;
+
+	return dma_init_descriptor_ring(ring, numDescriptors);
+}
+
+EXPORT_SYMBOL(dma_alloc_descriptor_ring);
+
+/****************************************************************************/
+/**
+*   Releases the memory which was previously allocated for a descriptor ring.
+*/
+/****************************************************************************/
+
+void dma_free_descriptor_ring(DMA_DescriptorRing_t *ring	/* Descriptor to release */
+    ) {
+	if (ring->virtAddr != NULL) {
+		dma_free_writecombine(NULL,
+				      ring->bytesAllocated,
+				      ring->virtAddr, ring->physAddr);
+	}
+
+	ring->bytesAllocated = 0;
+	ring->descriptorsAllocated = 0;
+	ring->virtAddr = NULL;
+	ring->physAddr = 0;
+}
+
+EXPORT_SYMBOL(dma_free_descriptor_ring);
+
+/****************************************************************************/
+/**
+*   Initializes a descriptor ring, so that descriptors can be added to it.
+*   Once a descriptor ring has been allocated, it may be reinitialized for
+*   use with additional/different regions of memory.
+*
+*   Note that if 7 descriptors are allocated, it's perfectly acceptable to
+*   initialize the ring with a smaller number of descriptors. The amount
+*   of memory allocated for the descriptor ring will not be reduced, and
+*   the descriptor ring may be reinitialized later
+*
+*   @return
+*       0           Descriptor ring was initialized successfully
+*       -ENOMEM     The descriptor which was passed in has insufficient space
+*                   to hold the desired number of descriptors.
+*/
+/****************************************************************************/
+
+int dma_init_descriptor_ring(DMA_DescriptorRing_t *ring,	/* Descriptor ring to initialize */
+			     int numDescriptors	/* Number of descriptors to initialize. */
+    ) {
+	if (ring->virtAddr == NULL) {
+		return -EINVAL;
+	}
+	if (dmacHw_initDescriptor(ring->virtAddr,
+				  ring->physAddr,
+				  ring->bytesAllocated, numDescriptors) < 0) {
+		printk(KERN_ERR
+		       "dma_init_descriptor_ring: dmacHw_initDescriptor failed\n");
+		return -ENOMEM;
+	}
+
+	return 0;
+}
+
+EXPORT_SYMBOL(dma_init_descriptor_ring);
+
+/****************************************************************************/
+/**
+*   Determines the number of descriptors which would be required for a
+*   transfer of the indicated memory region.
+*
+*   This function also needs to know which DMA device this transfer will
+*   be destined for, so that the appropriate DMA configuration can be retrieved.
+*   DMA parameters such as transfer width, and whether this is a memory-to-memory
+*   or memory-to-peripheral, etc can all affect the actual number of descriptors
+*   required.
+*
+*   @return
+*       > 0     Returns the number of descriptors required for the indicated transfer
+*       -ENODEV - Device handed in is invalid.
+*       -EINVAL Invalid parameters
+*       -ENOMEM Memory exhausted
+*/
+/****************************************************************************/
+
+int dma_calculate_descriptor_count(DMA_Device_t device,	/* DMA Device that this will be associated with */
+				   dma_addr_t srcData,	/* Place to get data to write to device */
+				   dma_addr_t dstData,	/* Pointer to device data address */
+				   size_t numBytes	/* Number of bytes to transfer to the device */
+    ) {
+	int numDescriptors;
+	DMA_DeviceAttribute_t *devAttr;
+
+	if (!IsDeviceValid(device)) {
+		return -ENODEV;
+	}
+	devAttr = &DMA_gDeviceAttribute[device];
+
+	numDescriptors = dmacHw_calculateDescriptorCount(&devAttr->config,
+							      (void *)srcData,
+							      (void *)dstData,
+							      numBytes);
+	if (numDescriptors < 0) {
+		printk(KERN_ERR
+		       "dma_calculate_descriptor_count: dmacHw_calculateDescriptorCount failed\n");
+		return -EINVAL;
+	}
+
+	return numDescriptors;
+}
+
+EXPORT_SYMBOL(dma_calculate_descriptor_count);
+
+/****************************************************************************/
+/**
+*   Adds a region of memory to the descriptor ring. Note that it may take
+*   multiple descriptors for each region of memory. It is the callers
+*   responsibility to allocate a sufficiently large descriptor ring.
+*
+*   @return
+*       0       Descriptors were added successfully
+*       -ENODEV Device handed in is invalid.
+*       -EINVAL Invalid parameters
+*       -ENOMEM Memory exhausted
+*/
+/****************************************************************************/
+
+int dma_add_descriptors(DMA_DescriptorRing_t *ring,	/* Descriptor ring to add descriptors to */
+			DMA_Device_t device,	/* DMA Device that descriptors are for */
+			dma_addr_t srcData,	/* Place to get data (memory or device) */
+			dma_addr_t dstData,	/* Place to put data (memory or device) */
+			size_t numBytes	/* Number of bytes to transfer to the device */
+    ) {
+	int rc;
+	DMA_DeviceAttribute_t *devAttr;
+
+	if (!IsDeviceValid(device)) {
+		return -ENODEV;
+	}
+	devAttr = &DMA_gDeviceAttribute[device];
+
+	rc = dmacHw_setDataDescriptor(&devAttr->config,
+				      ring->virtAddr,
+				      (void *)srcData,
+				      (void *)dstData, numBytes);
+	if (rc < 0) {
+		printk(KERN_ERR
+		       "dma_add_descriptors: dmacHw_setDataDescriptor failed with code: %d\n",
+		       rc);
+		return -ENOMEM;
+	}
+
+	return 0;
+}
+
+EXPORT_SYMBOL(dma_add_descriptors);
+
+/****************************************************************************/
+/**
+*   Sets the descriptor ring associated with a device.
+*
+*   Once set, the descriptor ring will be associated with the device, even
+*   across channel request/free calls. Passing in a NULL descriptor ring
+*   will release any descriptor ring currently associated with the device.
+*
+*   Note: If you call dma_transfer, or one of the other dma_alloc_ functions
+*         the descriptor ring may be released and reallocated.
+*
+*   Note: This function will release the descriptor memory for any current
+*         descriptor ring associated with this device.
+*
+*   @return
+*       0       Descriptors were added successfully
+*       -ENODEV Device handed in is invalid.
+*/
+/****************************************************************************/
+
+int dma_set_device_descriptor_ring(DMA_Device_t device,	/* Device to update the descriptor ring for. */
+				   DMA_DescriptorRing_t *ring	/* Descriptor ring to add descriptors to */
+    ) {
+	DMA_DeviceAttribute_t *devAttr;
+
+	if (!IsDeviceValid(device)) {
+		return -ENODEV;
+	}
+	devAttr = &DMA_gDeviceAttribute[device];
+
+	/* Free the previously allocated descriptor ring */
+
+	dma_free_descriptor_ring(&devAttr->ring);
+
+	if (ring != NULL) {
+		/* Copy in the new one */
+
+		devAttr->ring = *ring;
+	}
+
+	/* Set things up so that if dma_transfer is called then this descriptor */
+	/* ring will get freed. */
+
+	devAttr->prevSrcData = 0;
+	devAttr->prevDstData = 0;
+	devAttr->prevNumBytes = 0;
+
+	return 0;
+}
+
+EXPORT_SYMBOL(dma_set_device_descriptor_ring);
+
+/****************************************************************************/
+/**
+*   Retrieves the descriptor ring associated with a device.
+*
+*   @return
+*       0       Descriptors were added successfully
+*       -ENODEV Device handed in is invalid.
+*/
+/****************************************************************************/
+
+int dma_get_device_descriptor_ring(DMA_Device_t device,	/* Device to retrieve the descriptor ring for. */
+				   DMA_DescriptorRing_t *ring	/* Place to store retrieved ring */
+    ) {
+	DMA_DeviceAttribute_t *devAttr;
+
+	memset(ring, 0, sizeof(*ring));
+
+	if (!IsDeviceValid(device)) {
+		return -ENODEV;
+	}
+	devAttr = &DMA_gDeviceAttribute[device];
+
+	*ring = devAttr->ring;
+
+	return 0;
+}
+
+EXPORT_SYMBOL(dma_get_device_descriptor_ring);
+
+/****************************************************************************/
+/**
+*   Configures a DMA channel.
+*
+*   @return
+*       >= 0    - Initialization was successfull.
+*
+*       -EBUSY  - Device is currently being used.
+*       -ENODEV - Device handed in is invalid.
+*/
+/****************************************************************************/
+
+static int ConfigChannel(DMA_Handle_t handle)
+{
+	DMA_Channel_t *channel;
+	DMA_DeviceAttribute_t *devAttr;
+	int controllerIdx;
+
+	channel = HandleToChannel(handle);
+	if (channel == NULL) {
+		return -ENODEV;
+	}
+	devAttr = &DMA_gDeviceAttribute[channel->devType];
+	controllerIdx = CONTROLLER_FROM_HANDLE(handle);
+
+	if ((devAttr->flags & DMA_DEVICE_FLAG_PORT_PER_DMAC) != 0) {
+		if (devAttr->config.transferType ==
+		    dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL) {
+			devAttr->config.dstPeripheralPort =
+			    devAttr->dmacPort[controllerIdx];
+		} else if (devAttr->config.transferType ==
+			   dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM) {
+			devAttr->config.srcPeripheralPort =
+			    devAttr->dmacPort[controllerIdx];
+		}
+	}
+
+	if (dmacHw_configChannel(channel->dmacHwHandle, &devAttr->config) != 0) {
+		printk(KERN_ERR "ConfigChannel: dmacHw_configChannel failed\n");
+		return -EIO;
+	}
+
+	return 0;
+}
+
+/****************************************************************************/
+/**
+*   Intializes all of the data structures associated with the DMA.
+*   @return
+*       >= 0    - Initialization was successfull.
+*
+*       -EBUSY  - Device is currently being used.
+*       -ENODEV - Device handed in is invalid.
+*/
+/****************************************************************************/
+
+int dma_init(void)
+{
+	int rc = 0;
+	int controllerIdx;
+	int channelIdx;
+	DMA_Device_t devIdx;
+	DMA_Channel_t *channel;
+	DMA_Handle_t dedicatedHandle;
+
+	memset(&gDMA, 0, sizeof(gDMA));
+
+	init_MUTEX_LOCKED(&gDMA.lock);
+	init_waitqueue_head(&gDMA.freeChannelQ);
+
+	/* Initialize the Hardware */
+
+	dmacHw_initDma();
+
+	/* Start off by marking all of the DMA channels as shared. */
+
+	for (controllerIdx = 0; controllerIdx < DMA_NUM_CONTROLLERS;
+	     controllerIdx++) {
+		for (channelIdx = 0; channelIdx < DMA_NUM_CHANNELS;
+		     channelIdx++) {
+			channel =
+			    &gDMA.controller[controllerIdx].channel[channelIdx];
+
+			channel->flags = 0;
+			channel->devType = DMA_DEVICE_NONE;
+			channel->lastDevType = DMA_DEVICE_NONE;
+
+#if (DMA_DEBUG_TRACK_RESERVATION)
+			channel->fileName = "";
+			channel->lineNum = 0;
+#endif
+
+			channel->dmacHwHandle =
+			    dmacHw_getChannelHandle(dmacHw_MAKE_CHANNEL_ID
+						    (controllerIdx,
+						     channelIdx));
+			dmacHw_initChannel(channel->dmacHwHandle);
+		}
+	}
+
+	/* Record any special attributes that channels may have */
+
+	gDMA.controller[0].channel[0].flags |= DMA_CHANNEL_FLAG_LARGE_FIFO;
+	gDMA.controller[0].channel[1].flags |= DMA_CHANNEL_FLAG_LARGE_FIFO;
+	gDMA.controller[1].channel[0].flags |= DMA_CHANNEL_FLAG_LARGE_FIFO;
+	gDMA.controller[1].channel[1].flags |= DMA_CHANNEL_FLAG_LARGE_FIFO;
+
+	/* Now walk through and record the dedicated channels. */
+
+	for (devIdx = 0; devIdx < DMA_NUM_DEVICE_ENTRIES; devIdx++) {
+		DMA_DeviceAttribute_t *devAttr = &DMA_gDeviceAttribute[devIdx];
+
+		if (((devAttr->flags & DMA_DEVICE_FLAG_NO_ISR) != 0)
+		    && ((devAttr->flags & DMA_DEVICE_FLAG_IS_DEDICATED) == 0)) {
+			printk(KERN_ERR
+			       "DMA Device: %s Can only request NO_ISR for dedicated devices\n",
+			       devAttr->name);
+			rc = -EINVAL;
+			goto out;
+		}
+
+		if ((devAttr->flags & DMA_DEVICE_FLAG_IS_DEDICATED) != 0) {
+			/* This is a dedicated device. Mark the channel as being reserved. */
+
+			if (devAttr->dedicatedController >= DMA_NUM_CONTROLLERS) {
+				printk(KERN_ERR
+				       "DMA Device: %s DMA Controller %d is out of range\n",
+				       devAttr->name,
+				       devAttr->dedicatedController);
+				rc = -EINVAL;
+				goto out;
+			}
+
+			if (devAttr->dedicatedChannel >= DMA_NUM_CHANNELS) {
+				printk(KERN_ERR
+				       "DMA Device: %s DMA Channel %d is out of range\n",
+				       devAttr->name,
+				       devAttr->dedicatedChannel);
+				rc = -EINVAL;
+				goto out;
+			}
+
+			dedicatedHandle =
+			    MAKE_HANDLE(devAttr->dedicatedController,
+					devAttr->dedicatedChannel);
+			channel = HandleToChannel(dedicatedHandle);
+
+			if ((channel->flags & DMA_CHANNEL_FLAG_IS_DEDICATED) !=
+			    0) {
+				printk
+				    ("DMA Device: %s attempting to use same DMA Controller:Channel (%d:%d) as %s\n",
+				     devAttr->name,
+				     devAttr->dedicatedController,
+				     devAttr->dedicatedChannel,
+				     DMA_gDeviceAttribute[channel->devType].
+				     name);
+				rc = -EBUSY;
+				goto out;
+			}
+
+			channel->flags |= DMA_CHANNEL_FLAG_IS_DEDICATED;
+			channel->devType = devIdx;
+
+			if (devAttr->flags & DMA_DEVICE_FLAG_NO_ISR) {
+				channel->flags |= DMA_CHANNEL_FLAG_NO_ISR;
+			}
+
+			/* For dedicated channels, we can go ahead and configure the DMA channel now */
+			/* as well. */
+
+			ConfigChannel(dedicatedHandle);
+		}
+	}
+
+	/* Go through and register the interrupt handlers */
+
+	for (controllerIdx = 0; controllerIdx < DMA_NUM_CONTROLLERS;
+	     controllerIdx++) {
+		for (channelIdx = 0; channelIdx < DMA_NUM_CHANNELS;
+		     channelIdx++) {
+			channel =
+			    &gDMA.controller[controllerIdx].channel[channelIdx];
+
+			if ((channel->flags & DMA_CHANNEL_FLAG_NO_ISR) == 0) {
+				snprintf(channel->name, sizeof(channel->name),
+					 "dma %d:%d %s", controllerIdx,
+					 channelIdx,
+					 channel->devType ==
+					 DMA_DEVICE_NONE ? "" :
+					 DMA_gDeviceAttribute[channel->devType].
+					 name);
+
+				rc =
+				     request_irq(IRQ_DMA0C0 +
+						 (controllerIdx *
+						  DMA_NUM_CHANNELS) +
+						 channelIdx,
+						 dma_interrupt_handler,
+						 IRQF_DISABLED, channel->name,
+						 channel);
+				if (rc != 0) {
+					printk(KERN_ERR
+					       "request_irq for IRQ_DMA%dC%d failed\n",
+					       controllerIdx, channelIdx);
+				}
+			}
+		}
+	}
+
+	/* Create /proc/dma/channels and /proc/dma/devices */
+
+	gDmaDir = create_proc_entry("dma", S_IFDIR | S_IRUGO | S_IXUGO, NULL);
+
+	if (gDmaDir == NULL) {
+		printk(KERN_ERR "Unable to create /proc/dma\n");
+	} else {
+		create_proc_read_entry("channels", 0, gDmaDir,
+				       dma_proc_read_channels, NULL);
+		create_proc_read_entry("devices", 0, gDmaDir,
+				       dma_proc_read_devices, NULL);
+		create_proc_read_entry("mem-type", 0, gDmaDir,
+				       dma_proc_read_mem_type, NULL);
+	}
+
+out:
+
+	up(&gDMA.lock);
+
+	return rc;
+}
+
+/****************************************************************************/
+/**
+*   Reserves a channel for use with @a dev. If the device is setup to use
+*   a shared channel, then this function will block until a free channel
+*   becomes available.
+*
+*   @return
+*       >= 0    - A valid DMA Handle.
+*       -EBUSY  - Device is currently being used.
+*       -ENODEV - Device handed in is invalid.
+*/
+/****************************************************************************/
+
+#if (DMA_DEBUG_TRACK_RESERVATION)
+DMA_Handle_t dma_request_channel_dbg
+    (DMA_Device_t dev, const char *fileName, int lineNum)
+#else
+DMA_Handle_t dma_request_channel(DMA_Device_t dev)
+#endif
+{
+	DMA_Handle_t handle;
+	DMA_DeviceAttribute_t *devAttr;
+	DMA_Channel_t *channel;
+	int controllerIdx;
+	int controllerIdx2;
+	int channelIdx;
+
+	if (down_interruptible(&gDMA.lock) < 0) {
+		return -ERESTARTSYS;
+	}
+
+	if ((dev < 0) || (dev >= DMA_NUM_DEVICE_ENTRIES)) {
+		handle = -ENODEV;
+		goto out;
+	}
+	devAttr = &DMA_gDeviceAttribute[dev];
+
+#if (DMA_DEBUG_TRACK_RESERVATION)
+	{
+		char *s;
+
+		s = strrchr(fileName, '/');
+		if (s != NULL) {
+			fileName = s + 1;
+		}
+	}
+#endif
+	if ((devAttr->flags & DMA_DEVICE_FLAG_IN_USE) != 0) {
+		/* This device has already been requested and not been freed */
+
+		printk(KERN_ERR "%s: device %s is already requested\n",
+		       __func__, devAttr->name);
+		handle = -EBUSY;
+		goto out;
+	}
+
+	if ((devAttr->flags & DMA_DEVICE_FLAG_IS_DEDICATED) != 0) {
+		/* This device has a dedicated channel. */
+
+		channel =
+		    &gDMA.controller[devAttr->dedicatedController].
+		    channel[devAttr->dedicatedChannel];
+		if ((channel->flags & DMA_CHANNEL_FLAG_IN_USE) != 0) {
+			handle = -EBUSY;
+			goto out;
+		}
+
+		channel->flags |= DMA_CHANNEL_FLAG_IN_USE;
+		devAttr->flags |= DMA_DEVICE_FLAG_IN_USE;
+
+#if (DMA_DEBUG_TRACK_RESERVATION)
+		channel->fileName = fileName;
+		channel->lineNum = lineNum;
+#endif
+		handle =
+		    MAKE_HANDLE(devAttr->dedicatedController,
+				devAttr->dedicatedChannel);
+		goto out;
+	}
+
+	/* This device needs to use one of the shared channels. */
+
+	handle = DMA_INVALID_HANDLE;
+	while (handle == DMA_INVALID_HANDLE) {
+		/* Scan through the shared channels and see if one is available */
+
+		for (controllerIdx2 = 0; controllerIdx2 < DMA_NUM_CONTROLLERS;
+		     controllerIdx2++) {
+			/* Check to see if we should try on controller 1 first. */
+
+			controllerIdx = controllerIdx2;
+			if ((devAttr->
+			     flags & DMA_DEVICE_FLAG_ALLOC_DMA1_FIRST) != 0) {
+				controllerIdx = 1 - controllerIdx;
+			}
+
+			/* See if the device is available on the controller being tested */
+
+			if ((devAttr->
+			     flags & (DMA_DEVICE_FLAG_ON_DMA0 << controllerIdx))
+			    != 0) {
+				for (channelIdx = 0;
+				     channelIdx < DMA_NUM_CHANNELS;
+				     channelIdx++) {
+					channel =
+					    &gDMA.controller[controllerIdx].
+					    channel[channelIdx];
+
+					if (((channel->
+					      flags &
+					      DMA_CHANNEL_FLAG_IS_DEDICATED) ==
+					     0)
+					    &&
+					    ((channel->
+					      flags & DMA_CHANNEL_FLAG_IN_USE)
+					     == 0)) {
+						if (((channel->
+						      flags &
+						      DMA_CHANNEL_FLAG_LARGE_FIFO)
+						     != 0)
+						    &&
+						    ((devAttr->
+						      flags &
+						      DMA_DEVICE_FLAG_ALLOW_LARGE_FIFO)
+						     == 0)) {
+							/* This channel is a large fifo - don't tie it up */
+							/* with devices that we don't want using it. */
+
+							continue;
+						}
+
+						channel->flags |=
+						    DMA_CHANNEL_FLAG_IN_USE;
+						channel->devType = dev;
+						devAttr->flags |=
+						    DMA_DEVICE_FLAG_IN_USE;
+
+#if (DMA_DEBUG_TRACK_RESERVATION)
+						channel->fileName = fileName;
+						channel->lineNum = lineNum;
+#endif
+						handle =
+						    MAKE_HANDLE(controllerIdx,
+								channelIdx);
+
+						/* Now that we've reserved the channel - we can go ahead and configure it */
+
+						if (ConfigChannel(handle) != 0) {
+							handle = -EIO;
+							printk(KERN_ERR
+							       "dma_request_channel: ConfigChannel failed\n");
+						}
+						goto out;
+					}
+				}
+			}
+		}
+
+		/* No channels are currently available. Let's wait for one to free up. */
+
+		{
+			DEFINE_WAIT(wait);
+
+			prepare_to_wait(&gDMA.freeChannelQ, &wait,
+					TASK_INTERRUPTIBLE);
+			up(&gDMA.lock);
+			schedule();
+			finish_wait(&gDMA.freeChannelQ, &wait);
+
+			if (signal_pending(current)) {
+				/* We don't currently hold gDMA.lock, so we return directly */
+
+				return -ERESTARTSYS;
+			}
+		}
+
+		if (down_interruptible(&gDMA.lock)) {
+			return -ERESTARTSYS;
+		}
+	}
+
+out:
+	up(&gDMA.lock);
+
+	return handle;
+}
+
+/* Create both _dbg and non _dbg functions for modules. */
+
+#if (DMA_DEBUG_TRACK_RESERVATION)
+#undef dma_request_channel
+DMA_Handle_t dma_request_channel(DMA_Device_t dev)
+{
+	return dma_request_channel_dbg(dev, __FILE__, __LINE__);
+}
+
+EXPORT_SYMBOL(dma_request_channel_dbg);
+#endif
+EXPORT_SYMBOL(dma_request_channel);
+
+/****************************************************************************/
+/**
+*   Frees a previously allocated DMA Handle.
+*/
+/****************************************************************************/
+
+int dma_free_channel(DMA_Handle_t handle	/* DMA handle. */
+    ) {
+	int rc = 0;
+	DMA_Channel_t *channel;
+	DMA_DeviceAttribute_t *devAttr;
+
+	if (down_interruptible(&gDMA.lock) < 0) {
+		return -ERESTARTSYS;
+	}
+
+	channel = HandleToChannel(handle);
+	if (channel == NULL) {
+		rc = -EINVAL;
+		goto out;
+	}
+
+	devAttr = &DMA_gDeviceAttribute[channel->devType];
+
+	if ((channel->flags & DMA_CHANNEL_FLAG_IS_DEDICATED) == 0) {
+		channel->lastDevType = channel->devType;
+		channel->devType = DMA_DEVICE_NONE;
+	}
+	channel->flags &= ~DMA_CHANNEL_FLAG_IN_USE;
+	devAttr->flags &= ~DMA_DEVICE_FLAG_IN_USE;
+
+out:
+	up(&gDMA.lock);
+
+	wake_up_interruptible(&gDMA.freeChannelQ);
+
+	return rc;
+}
+
+EXPORT_SYMBOL(dma_free_channel);
+
+/****************************************************************************/
+/**
+*   Determines if a given device has been configured as using a shared
+*   channel.
+*
+*   @return
+*       0           Device uses a dedicated channel
+*       > zero      Device uses a shared channel
+*       < zero      Error code
+*/
+/****************************************************************************/
+
+int dma_device_is_channel_shared(DMA_Device_t device	/* Device to check. */
+    ) {
+	DMA_DeviceAttribute_t *devAttr;
+
+	if (!IsDeviceValid(device)) {
+		return -ENODEV;
+	}
+	devAttr = &DMA_gDeviceAttribute[device];
+
+	return ((devAttr->flags & DMA_DEVICE_FLAG_IS_DEDICATED) == 0);
+}
+
+EXPORT_SYMBOL(dma_device_is_channel_shared);
+
+/****************************************************************************/
+/**
+*   Allocates buffers for the descriptors. This is normally done automatically
+*   but needs to be done explicitly when initiating a dma from interrupt
+*   context.
+*
+*   @return
+*       0       Descriptors were allocated successfully
+*       -EINVAL Invalid device type for this kind of transfer
+*               (i.e. the device is _MEM_TO_DEV and not _DEV_TO_MEM)
+*       -ENOMEM Memory exhausted
+*/
+/****************************************************************************/
+
+int dma_alloc_descriptors(DMA_Handle_t handle,	/* DMA Handle */
+			  dmacHw_TRANSFER_TYPE_e transferType,	/* Type of transfer being performed */
+			  dma_addr_t srcData,	/* Place to get data to write to device */
+			  dma_addr_t dstData,	/* Pointer to device data address */
+			  size_t numBytes	/* Number of bytes to transfer to the device */
+    ) {
+	DMA_Channel_t *channel;
+	DMA_DeviceAttribute_t *devAttr;
+	int numDescriptors;
+	size_t ringBytesRequired;
+	int rc = 0;
+
+	channel = HandleToChannel(handle);
+	if (channel == NULL) {
+		return -ENODEV;
+	}
+
+	devAttr = &DMA_gDeviceAttribute[channel->devType];
+
+	if (devAttr->config.transferType != transferType) {
+		return -EINVAL;
+	}
+
+	/* Figure out how many descriptors we need. */
+
+	/* printk("srcData: 0x%08x dstData: 0x%08x, numBytes: %d\n", */
+	/*        srcData, dstData, numBytes); */
+
+	numDescriptors = dmacHw_calculateDescriptorCount(&devAttr->config,
+							      (void *)srcData,
+							      (void *)dstData,
+							      numBytes);
+	if (numDescriptors < 0) {
+		printk(KERN_ERR "%s: dmacHw_calculateDescriptorCount failed\n",
+		       __func__);
+		return -EINVAL;
+	}
+
+	/* Check to see if we can reuse the existing descriptor ring, or if we need to allocate */
+	/* a new one. */
+
+	ringBytesRequired = dmacHw_descriptorLen(numDescriptors);
+
+	/* printk("ringBytesRequired: %d\n", ringBytesRequired); */
+
+	if (ringBytesRequired > devAttr->ring.bytesAllocated) {
+		/* Make sure that this code path is never taken from interrupt context. */
+		/* It's OK for an interrupt to initiate a DMA transfer, but the descriptor */
+		/* allocation needs to have already been done. */
+
+		might_sleep();
+
+		/* Free the old descriptor ring and allocate a new one. */
+
+		dma_free_descriptor_ring(&devAttr->ring);
+
+		/* And allocate a new one. */
+
+		rc =
+		     dma_alloc_descriptor_ring(&devAttr->ring,
+					       numDescriptors);
+		if (rc < 0) {
+			printk(KERN_ERR
+			       "%s: dma_alloc_descriptor_ring(%d) failed\n",
+			       __func__, numDescriptors);
+			return rc;
+		}
+		/* Setup the descriptor for this transfer */
+
+		if (dmacHw_initDescriptor(devAttr->ring.virtAddr,
+					  devAttr->ring.physAddr,
+					  devAttr->ring.bytesAllocated,
+					  numDescriptors) < 0) {
+			printk(KERN_ERR "%s: dmacHw_initDescriptor failed\n",
+			       __func__);
+			return -EINVAL;
+		}
+	} else {
+		/* We've already got enough ring buffer allocated. All we need to do is reset */
+		/* any control information, just in case the previous DMA was stopped. */
+
+		dmacHw_resetDescriptorControl(devAttr->ring.virtAddr);
+	}
+
+	/* dma_alloc/free both set the prevSrc/DstData to 0. If they happen to be the same */
+	/* as last time, then we don't need to call setDataDescriptor again. */
+
+	if (dmacHw_setDataDescriptor(&devAttr->config,
+				     devAttr->ring.virtAddr,
+				     (void *)srcData,
+				     (void *)dstData, numBytes) < 0) {
+		printk(KERN_ERR "%s: dmacHw_setDataDescriptor failed\n",
+		       __func__);
+		return -EINVAL;
+	}
+
+	/* Remember the critical information for this transfer so that we can eliminate */
+	/* another call to dma_alloc_descriptors if the caller reuses the same buffers */
+
+	devAttr->prevSrcData = srcData;
+	devAttr->prevDstData = dstData;
+	devAttr->prevNumBytes = numBytes;
+
+	return 0;
+}
+
+EXPORT_SYMBOL(dma_alloc_descriptors);
+
+/****************************************************************************/
+/**
+*   Allocates and sets up descriptors for a double buffered circular buffer.
+*
+*   This is primarily intended to be used for things like the ingress samples
+*   from a microphone.
+*
+*   @return
+*       > 0     Number of descriptors actually allocated.
+*       -EINVAL Invalid device type for this kind of transfer
+*               (i.e. the device is _MEM_TO_DEV and not _DEV_TO_MEM)
+*       -ENOMEM Memory exhausted
+*/
+/****************************************************************************/
+
+int dma_alloc_double_dst_descriptors(DMA_Handle_t handle,	/* DMA Handle */
+				     dma_addr_t srcData,	/* Physical address of source data */
+				     dma_addr_t dstData1,	/* Physical address of first destination buffer */
+				     dma_addr_t dstData2,	/* Physical address of second destination buffer */
+				     size_t numBytes	/* Number of bytes in each destination buffer */
+    ) {
+	DMA_Channel_t *channel;
+	DMA_DeviceAttribute_t *devAttr;
+	int numDst1Descriptors;
+	int numDst2Descriptors;
+	int numDescriptors;
+	size_t ringBytesRequired;
+	int rc = 0;
+
+	channel = HandleToChannel(handle);
+	if (channel == NULL) {
+		return -ENODEV;
+	}
+
+	devAttr = &DMA_gDeviceAttribute[channel->devType];
+
+	/* Figure out how many descriptors we need. */
+
+	/* printk("srcData: 0x%08x dstData: 0x%08x, numBytes: %d\n", */
+	/*        srcData, dstData, numBytes); */
+
+	numDst1Descriptors =
+	     dmacHw_calculateDescriptorCount(&devAttr->config, (void *)srcData,
+					     (void *)dstData1, numBytes);
+	if (numDst1Descriptors < 0) {
+		return -EINVAL;
+	}
+	numDst2Descriptors =
+	     dmacHw_calculateDescriptorCount(&devAttr->config, (void *)srcData,
+					     (void *)dstData2, numBytes);
+	if (numDst2Descriptors < 0) {
+		return -EINVAL;
+	}
+	numDescriptors = numDst1Descriptors + numDst2Descriptors;
+	/* printk("numDescriptors: %d\n", numDescriptors); */
+
+	/* Check to see if we can reuse the existing descriptor ring, or if we need to allocate */
+	/* a new one. */
+
+	ringBytesRequired = dmacHw_descriptorLen(numDescriptors);
+
+	/* printk("ringBytesRequired: %d\n", ringBytesRequired); */
+
+	if (ringBytesRequired > devAttr->ring.bytesAllocated) {
+		/* Make sure that this code path is never taken from interrupt context. */
+		/* It's OK for an interrupt to initiate a DMA transfer, but the descriptor */
+		/* allocation needs to have already been done. */
+
+		might_sleep();
+
+		/* Free the old descriptor ring and allocate a new one. */
+
+		dma_free_descriptor_ring(&devAttr->ring);
+
+		/* And allocate a new one. */
+
+		rc =
+		     dma_alloc_descriptor_ring(&devAttr->ring,
+					       numDescriptors);
+		if (rc < 0) {
+			printk(KERN_ERR
+			       "%s: dma_alloc_descriptor_ring(%d) failed\n",
+			       __func__, ringBytesRequired);
+			return rc;
+		}
+	}
+
+	/* Setup the descriptor for this transfer. Since this function is used with */
+	/* CONTINUOUS DMA operations, we need to reinitialize every time, otherwise */
+	/* setDataDescriptor will keep trying to append onto the end. */
+
+	if (dmacHw_initDescriptor(devAttr->ring.virtAddr,
+				  devAttr->ring.physAddr,
+				  devAttr->ring.bytesAllocated,
+				  numDescriptors) < 0) {
+		printk(KERN_ERR "%s: dmacHw_initDescriptor failed\n", __func__);
+		return -EINVAL;
+	}
+
+	/* dma_alloc/free both set the prevSrc/DstData to 0. If they happen to be the same */
+	/* as last time, then we don't need to call setDataDescriptor again. */
+
+	if (dmacHw_setDataDescriptor(&devAttr->config,
+				     devAttr->ring.virtAddr,
+				     (void *)srcData,
+				     (void *)dstData1, numBytes) < 0) {
+		printk(KERN_ERR "%s: dmacHw_setDataDescriptor 1 failed\n",
+		       __func__);
+		return -EINVAL;
+	}
+	if (dmacHw_setDataDescriptor(&devAttr->config,
+				     devAttr->ring.virtAddr,
+				     (void *)srcData,
+				     (void *)dstData2, numBytes) < 0) {
+		printk(KERN_ERR "%s: dmacHw_setDataDescriptor 2 failed\n",
+		       __func__);
+		return -EINVAL;
+	}
+
+	/* You should use dma_start_transfer rather than dma_transfer_xxx so we don't */
+	/* try to make the 'prev' variables right. */
+
+	devAttr->prevSrcData = 0;
+	devAttr->prevDstData = 0;
+	devAttr->prevNumBytes = 0;
+
+	return numDescriptors;
+}
+
+EXPORT_SYMBOL(dma_alloc_double_dst_descriptors);
+
+/****************************************************************************/
+/**
+*   Initiates a transfer when the descriptors have already been setup.
+*
+*   This is a special case, and normally, the dma_transfer_xxx functions should
+*   be used.
+*
+*   @return
+*       0       Transfer was started successfully
+*       -ENODEV Invalid handle
+*/
+/****************************************************************************/
+
+int dma_start_transfer(DMA_Handle_t handle)
+{
+	DMA_Channel_t *channel;
+	DMA_DeviceAttribute_t *devAttr;
+
+	channel = HandleToChannel(handle);
+	if (channel == NULL) {
+		return -ENODEV;
+	}
+	devAttr = &DMA_gDeviceAttribute[channel->devType];
+
+	dmacHw_initiateTransfer(channel->dmacHwHandle, &devAttr->config,
+				devAttr->ring.virtAddr);
+
+	/* Since we got this far, everything went successfully */
+
+	return 0;
+}
+
+EXPORT_SYMBOL(dma_start_transfer);
+
+/****************************************************************************/
+/**
+*   Stops a previously started DMA transfer.
+*
+*   @return
+*       0       Transfer was stopped successfully
+*       -ENODEV Invalid handle
+*/
+/****************************************************************************/
+
+int dma_stop_transfer(DMA_Handle_t handle)
+{
+	DMA_Channel_t *channel;
+
+	channel = HandleToChannel(handle);
+	if (channel == NULL) {
+		return -ENODEV;
+	}
+
+	dmacHw_stopTransfer(channel->dmacHwHandle);
+
+	return 0;
+}
+
+EXPORT_SYMBOL(dma_stop_transfer);
+
+/****************************************************************************/
+/**
+*   Waits for a DMA to complete by polling. This function is only intended
+*   to be used for testing. Interrupts should be used for most DMA operations.
+*/
+/****************************************************************************/
+
+int dma_wait_transfer_done(DMA_Handle_t handle)
+{
+	DMA_Channel_t *channel;
+	dmacHw_TRANSFER_STATUS_e status;
+
+	channel = HandleToChannel(handle);
+	if (channel == NULL) {
+		return -ENODEV;
+	}
+
+	while ((status =
+		dmacHw_transferCompleted(channel->dmacHwHandle)) ==
+	       dmacHw_TRANSFER_STATUS_BUSY) {
+		;
+	}
+
+	if (status == dmacHw_TRANSFER_STATUS_ERROR) {
+		printk(KERN_ERR "%s: DMA transfer failed\n", __func__);
+		return -EIO;
+	}
+	return 0;
+}
+
+EXPORT_SYMBOL(dma_wait_transfer_done);
+
+/****************************************************************************/
+/**
+*   Initiates a DMA, allocating the descriptors as required.
+*
+*   @return
+*       0       Transfer was started successfully
+*       -EINVAL Invalid device type for this kind of transfer
+*               (i.e. the device is _DEV_TO_MEM and not _MEM_TO_DEV)
+*/
+/****************************************************************************/
+
+int dma_transfer(DMA_Handle_t handle,	/* DMA Handle */
+		 dmacHw_TRANSFER_TYPE_e transferType,	/* Type of transfer being performed */
+		 dma_addr_t srcData,	/* Place to get data to write to device */
+		 dma_addr_t dstData,	/* Pointer to device data address */
+		 size_t numBytes	/* Number of bytes to transfer to the device */
+    ) {
+	DMA_Channel_t *channel;
+	DMA_DeviceAttribute_t *devAttr;
+	int rc = 0;
+
+	channel = HandleToChannel(handle);
+	if (channel == NULL) {
+		return -ENODEV;
+	}
+
+	devAttr = &DMA_gDeviceAttribute[channel->devType];
+
+	if (devAttr->config.transferType != transferType) {
+		return -EINVAL;
+	}
+
+	/* We keep track of the information about the previous request for this */
+	/* device, and if the attributes match, then we can use the descriptors we setup */
+	/* the last time, and not have to reinitialize everything. */
+
+	{
+		rc =
+		     dma_alloc_descriptors(handle, transferType, srcData,
+					   dstData, numBytes);
+		if (rc != 0) {
+			return rc;
+		}
+	}
+
+	/* And kick off the transfer */
+
+	devAttr->numBytes = numBytes;
+	devAttr->transferStartTime = timer_get_tick_count();
+
+	dmacHw_initiateTransfer(channel->dmacHwHandle, &devAttr->config,
+				devAttr->ring.virtAddr);
+
+	/* Since we got this far, everything went successfully */
+
+	return 0;
+}
+
+EXPORT_SYMBOL(dma_transfer);
+
+/****************************************************************************/
+/**
+*   Set the callback function which will be called when a transfer completes.
+*   If a NULL callback function is set, then no callback will occur.
+*
+*   @note   @a devHandler will be called from IRQ context.
+*
+*   @return
+*       0       - Success
+*       -ENODEV - Device handed in is invalid.
+*/
+/****************************************************************************/
+
+int dma_set_device_handler(DMA_Device_t dev,	/* Device to set the callback for. */
+			   DMA_DeviceHandler_t devHandler,	/* Function to call when the DMA completes */
+			   void *userData	/* Pointer which will be passed to devHandler. */
+    ) {
+	DMA_DeviceAttribute_t *devAttr;
+	unsigned long flags;
+
+	if (!IsDeviceValid(dev)) {
+		return -ENODEV;
+	}
+	devAttr = &DMA_gDeviceAttribute[dev];
+
+	local_irq_save(flags);
+
+	devAttr->userData = userData;
+	devAttr->devHandler = devHandler;
+
+	local_irq_restore(flags);
+
+	return 0;
+}
+
+EXPORT_SYMBOL(dma_set_device_handler);
+
+/****************************************************************************/
+/**
+*   Initializes a memory mapping structure
+*/
+/****************************************************************************/
+
+int dma_init_mem_map(DMA_MemMap_t *memMap)
+{
+	memset(memMap, 0, sizeof(*memMap));
+
+	init_MUTEX(&memMap->lock);
+
+	return 0;
+}
+
+EXPORT_SYMBOL(dma_init_mem_map);
+
+/****************************************************************************/
+/**
+*   Releases any memory currently being held by a memory mapping structure.
+*/
+/****************************************************************************/
+
+int dma_term_mem_map(DMA_MemMap_t *memMap)
+{
+	down(&memMap->lock);	/* Just being paranoid */
+
+	/* Free up any allocated memory */
+
+	up(&memMap->lock);
+	memset(memMap, 0, sizeof(*memMap));
+
+	return 0;
+}
+
+EXPORT_SYMBOL(dma_term_mem_map);
+
+/****************************************************************************/
+/**
+*   Looks at a memory address and categorizes it.
+*
+*   @return One of the values from the DMA_MemType_t enumeration.
+*/
+/****************************************************************************/
+
+DMA_MemType_t dma_mem_type(void *addr)
+{
+	unsigned long addrVal = (unsigned long)addr;
+
+	if (addrVal >= VMALLOC_END) {
+		/* NOTE: DMA virtual memory space starts at 0xFFxxxxxx */
+
+		/* dma_alloc_xxx pages are physically and virtually contiguous */
+
+		return DMA_MEM_TYPE_DMA;
+	}
+
+	/* Technically, we could add one more classification. Addresses between VMALLOC_END */
+	/* and the beginning of the DMA virtual address could be considered to be I/O space. */
+	/* Right now, nobody cares about this particular classification, so we ignore it. */
+
+	if (is_vmalloc_addr(addr)) {
+		/* Address comes from the vmalloc'd region. Pages are virtually */
+		/* contiguous but NOT physically contiguous */
+
+		return DMA_MEM_TYPE_VMALLOC;
+	}
+
+	if (addrVal >= PAGE_OFFSET) {
+		/* PAGE_OFFSET is typically 0xC0000000 */
+
+		/* kmalloc'd pages are physically contiguous */
+
+		return DMA_MEM_TYPE_KMALLOC;
+	}
+
+	return DMA_MEM_TYPE_USER;
+}
+
+EXPORT_SYMBOL(dma_mem_type);
+
+/****************************************************************************/
+/**
+*   Looks at a memory address and determines if we support DMA'ing to/from
+*   that type of memory.
+*
+*   @return boolean -
+*               return value != 0 means dma supported
+*               return value == 0 means dma not supported
+*/
+/****************************************************************************/
+
+int dma_mem_supports_dma(void *addr)
+{
+	DMA_MemType_t memType = dma_mem_type(addr);
+
+	return (memType == DMA_MEM_TYPE_DMA)
+#if ALLOW_MAP_OF_KMALLOC_MEMORY
+	    || (memType == DMA_MEM_TYPE_KMALLOC)
+#endif
+	    || (memType == DMA_MEM_TYPE_USER);
+}
+
+EXPORT_SYMBOL(dma_mem_supports_dma);
+
+/****************************************************************************/
+/**
+*   Maps in a memory region such that it can be used for performing a DMA.
+*
+*   @return
+*/
+/****************************************************************************/
+
+int dma_map_start(DMA_MemMap_t *memMap,	/* Stores state information about the map */
+		  enum dma_data_direction dir	/* Direction that the mapping will be going */
+    ) {
+	int rc;
+
+	down(&memMap->lock);
+
+	DMA_MAP_PRINT("memMap: %p\n", memMap);
+
+	if (memMap->inUse) {
+		printk(KERN_ERR "%s: memory map %p is already being used\n",
+		       __func__, memMap);
+		rc = -EBUSY;
+		goto out;
+	}
+
+	memMap->inUse = 1;
+	memMap->dir = dir;
+	memMap->numRegionsUsed = 0;
+
+	rc = 0;
+
+out:
+
+	DMA_MAP_PRINT("returning %d", rc);
+
+	up(&memMap->lock);
+
+	return rc;
+}
+
+EXPORT_SYMBOL(dma_map_start);
+
+/****************************************************************************/
+/**
+*   Adds a segment of memory to a memory map. Each segment is both
+*   physically and virtually contiguous.
+*
+*   @return     0 on success, error code otherwise.
+*/
+/****************************************************************************/
+
+static int dma_map_add_segment(DMA_MemMap_t *memMap,	/* Stores state information about the map */
+			       DMA_Region_t *region,	/* Region that the segment belongs to */
+			       void *virtAddr,	/* Virtual address of the segment being added */
+			       dma_addr_t physAddr,	/* Physical address of the segment being added */
+			       size_t numBytes	/* Number of bytes of the segment being added */
+    ) {
+	DMA_Segment_t *segment;
+
+	DMA_MAP_PRINT("memMap:%p va:%p pa:0x%x #:%d\n", memMap, virtAddr,
+		      physAddr, numBytes);
+
+	/* Sanity check */
+
+	if (((unsigned long)virtAddr < (unsigned long)region->virtAddr)
+	    || (((unsigned long)virtAddr + numBytes)) >
+	    ((unsigned long)region->virtAddr + region->numBytes)) {
+		printk(KERN_ERR
+		       "%s: virtAddr %p is outside region @ %p len: %d\n",
+		       __func__, virtAddr, region->virtAddr, region->numBytes);
+		return -EINVAL;
+	}
+
+	if (region->numSegmentsUsed > 0) {
+		/* Check to see if this segment is physically contiguous with the previous one */
+
+		segment = &region->segment[region->numSegmentsUsed - 1];
+
+		if ((segment->physAddr + segment->numBytes) == physAddr) {
+			/* It is - just add on to the end */
+
+			DMA_MAP_PRINT("appending %d bytes to last segment\n",
+				      numBytes);
+
+			segment->numBytes += numBytes;
+
+			return 0;
+		}
+	}
+
+	/* Reallocate to hold more segments, if required. */
+
+	if (region->numSegmentsUsed >= region->numSegmentsAllocated) {
+		DMA_Segment_t *newSegment;
+		size_t oldSize =
+		    region->numSegmentsAllocated * sizeof(*newSegment);
+		int newAlloc = region->numSegmentsAllocated + 4;
+		size_t newSize = newAlloc * sizeof(*newSegment);
+
+		newSegment = kmalloc(newSize, GFP_KERNEL);
+		if (newSegment == NULL) {
+			return -ENOMEM;
+		}
+		memcpy(newSegment, region->segment, oldSize);
+		memset(&((uint8_t *) newSegment)[oldSize], 0,
+		       newSize - oldSize);
+		kfree(region->segment);
+
+		region->numSegmentsAllocated = newAlloc;
+		region->segment = newSegment;
+	}
+
+	segment = &region->segment[region->numSegmentsUsed];
+	region->numSegmentsUsed++;
+
+	segment->virtAddr = virtAddr;
+	segment->physAddr = physAddr;
+	segment->numBytes = numBytes;
+
+	DMA_MAP_PRINT("returning success\n");
+
+	return 0;
+}
+
+/****************************************************************************/
+/**
+*   Adds a region of memory to a memory map. Each region is virtually
+*   contiguous, but not necessarily physically contiguous.
+*
+*   @return     0 on success, error code otherwise.
+*/
+/****************************************************************************/
+
+int dma_map_add_region(DMA_MemMap_t *memMap,	/* Stores state information about the map */
+		       void *mem,	/* Virtual address that we want to get a map of */
+		       size_t numBytes	/* Number of bytes being mapped */
+    ) {
+	unsigned long addr = (unsigned long)mem;
+	unsigned int offset;
+	int rc = 0;
+	DMA_Region_t *region;
+	dma_addr_t physAddr;
+
+	down(&memMap->lock);
+
+	DMA_MAP_PRINT("memMap:%p va:%p #:%d\n", memMap, mem, numBytes);
+
+	if (!memMap->inUse) {
+		printk(KERN_ERR "%s: Make sure you call dma_map_start first\n",
+		       __func__);
+		rc = -EINVAL;
+		goto out;
+	}
+
+	/* Reallocate to hold more regions. */
+
+	if (memMap->numRegionsUsed >= memMap->numRegionsAllocated) {
+		DMA_Region_t *newRegion;
+		size_t oldSize =
+		    memMap->numRegionsAllocated * sizeof(*newRegion);
+		int newAlloc = memMap->numRegionsAllocated + 4;
+		size_t newSize = newAlloc * sizeof(*newRegion);
+
+		newRegion = kmalloc(newSize, GFP_KERNEL);
+		if (newRegion == NULL) {
+			rc = -ENOMEM;
+			goto out;
+		}
+		memcpy(newRegion, memMap->region, oldSize);
+		memset(&((uint8_t *) newRegion)[oldSize], 0, newSize - oldSize);
+
+		kfree(memMap->region);
+
+		memMap->numRegionsAllocated = newAlloc;
+		memMap->region = newRegion;
+	}
+
+	region = &memMap->region[memMap->numRegionsUsed];
+	memMap->numRegionsUsed++;
+
+	offset = addr & ~PAGE_MASK;
+
+	region->memType = dma_mem_type(mem);
+	region->virtAddr = mem;
+	region->numBytes = numBytes;
+	region->numSegmentsUsed = 0;
+	region->numLockedPages = 0;
+	region->lockedPages = NULL;
+
+	switch (region->memType) {
+	case DMA_MEM_TYPE_VMALLOC:
+		{
+			atomic_inc(&gDmaStatMemTypeVmalloc);
+
+			/* printk(KERN_ERR "%s: vmalloc'd pages are not supported\n", __func__); */
+
+			/* vmalloc'd pages are not physically contiguous */
+
+			rc = -EINVAL;
+			break;
+		}
+
+	case DMA_MEM_TYPE_KMALLOC:
+		{
+			atomic_inc(&gDmaStatMemTypeKmalloc);
+
+			/* kmalloc'd pages are physically contiguous, so they'll have exactly */
+			/* one segment */
+
+#if ALLOW_MAP_OF_KMALLOC_MEMORY
+			physAddr =
+			    dma_map_single(NULL, mem, numBytes, memMap->dir);
+			rc = dma_map_add_segment(memMap, region, mem, physAddr,
+						 numBytes);
+#else
+			rc = -EINVAL;
+#endif
+			break;
+		}
+
+	case DMA_MEM_TYPE_DMA:
+		{
+			/* dma_alloc_xxx pages are physically contiguous */
+
+			atomic_inc(&gDmaStatMemTypeCoherent);
+
+			physAddr = (vmalloc_to_pfn(mem) << PAGE_SHIFT) + offset;
+
+			dma_sync_single_for_cpu(NULL, physAddr, numBytes,
+						memMap->dir);
+			rc = dma_map_add_segment(memMap, region, mem, physAddr,
+						 numBytes);
+			break;
+		}
+
+	case DMA_MEM_TYPE_USER:
+		{
+			size_t firstPageOffset;
+			size_t firstPageSize;
+			struct page **pages;
+			struct task_struct *userTask;
+
+			atomic_inc(&gDmaStatMemTypeUser);
+
+#if 1
+			/* If the pages are user pages, then the dma_mem_map_set_user_task function */
+			/* must have been previously called. */
+
+			if (memMap->userTask == NULL) {
+				printk(KERN_ERR
+				       "%s: must call dma_mem_map_set_user_task when using user-mode memory\n",
+				       __func__);
+				return -EINVAL;
+			}
+
+			/* User pages need to be locked. */
+
+			firstPageOffset =
+			    (unsigned long)region->virtAddr & (PAGE_SIZE - 1);
+			firstPageSize = PAGE_SIZE - firstPageOffset;
+
+			region->numLockedPages = (firstPageOffset
+						  + region->numBytes +
+						  PAGE_SIZE - 1) / PAGE_SIZE;
+			pages =
+			    kmalloc(region->numLockedPages *
+				    sizeof(struct page *), GFP_KERNEL);
+
+			if (pages == NULL) {
+				region->numLockedPages = 0;
+				return -ENOMEM;
+			}
+
+			userTask = memMap->userTask;
+
+			down_read(&userTask->mm->mmap_sem);
+			rc = get_user_pages(userTask,	/* task */
+					    userTask->mm,	/* mm */
+					    (unsigned long)region->virtAddr,	/* start */
+					    region->numLockedPages,	/* len */
+					    memMap->dir == DMA_FROM_DEVICE,	/* write */
+					    0,	/* force */
+					    pages,	/* pages (array of pointers to page) */
+					    NULL);	/* vmas */
+			up_read(&userTask->mm->mmap_sem);
+
+			if (rc != region->numLockedPages) {
+				kfree(pages);
+				region->numLockedPages = 0;
+
+				if (rc >= 0) {
+					rc = -EINVAL;
+				}
+			} else {
+				uint8_t *virtAddr = region->virtAddr;
+				size_t bytesRemaining;
+				int pageIdx;
+
+				rc = 0;	/* Since get_user_pages returns +ve number */
+
+				region->lockedPages = pages;
+
+				/* We've locked the user pages. Now we need to walk them and figure */
+				/* out the physical addresses. */
+
+				/* The first page may be partial */
+
+				dma_map_add_segment(memMap,
+						    region,
+						    virtAddr,
+						    PFN_PHYS(page_to_pfn
+							     (pages[0])) +
+						    firstPageOffset,
+						    firstPageSize);
+
+				virtAddr += firstPageSize;
+				bytesRemaining =
+				    region->numBytes - firstPageSize;
+
+				for (pageIdx = 1;
+				     pageIdx < region->numLockedPages;
+				     pageIdx++) {
+					size_t bytesThisPage =
+					    (bytesRemaining >
+					     PAGE_SIZE ? PAGE_SIZE :
+					     bytesRemaining);
+
+					DMA_MAP_PRINT
+					    ("pageIdx:%d pages[pageIdx]=%p pfn=%u phys=%u\n",
+					     pageIdx, pages[pageIdx],
+					     page_to_pfn(pages[pageIdx]),
+					     PFN_PHYS(page_to_pfn
+						      (pages[pageIdx])));
+
+					dma_map_add_segment(memMap,
+							    region,
+							    virtAddr,
+							    PFN_PHYS(page_to_pfn
+								     (pages
+								      [pageIdx])),
+							    bytesThisPage);
+
+					virtAddr += bytesThisPage;
+					bytesRemaining -= bytesThisPage;
+				}
+			}
+#else
+			printk(KERN_ERR
+			       "%s: User mode pages are not yet supported\n",
+			       __func__);
+
+			/* user pages are not physically contiguous */
+
+			rc = -EINVAL;
+#endif
+			break;
+		}
+
+	default:
+		{
+			printk(KERN_ERR "%s: Unsupported memory type: %d\n",
+			       __func__, region->memType);
+
+			rc = -EINVAL;
+			break;
+		}
+	}
+
+	if (rc != 0) {
+		memMap->numRegionsUsed--;
+	}
+
+out:
+
+	DMA_MAP_PRINT("returning %d\n", rc);
+
+	up(&memMap->lock);
+
+	return rc;
+}
+
+EXPORT_SYMBOL(dma_map_add_segment);
+
+/****************************************************************************/
+/**
+*   Maps in a memory region such that it can be used for performing a DMA.
+*
+*   @return     0 on success, error code otherwise.
+*/
+/****************************************************************************/
+
+int dma_map_mem(DMA_MemMap_t *memMap,	/* Stores state information about the map */
+		void *mem,	/* Virtual address that we want to get a map of */
+		size_t numBytes,	/* Number of bytes being mapped */
+		enum dma_data_direction dir	/* Direction that the mapping will be going */
+    ) {
+	int rc;
+
+	rc = dma_map_start(memMap, dir);
+	if (rc == 0) {
+		rc = dma_map_add_region(memMap, mem, numBytes);
+		if (rc < 0) {
+			/* Since the add fails, this function will fail, and the caller won't */
+			/* call unmap, so we need to do it here. */
+
+			dma_unmap(memMap, 0);
+		}
+	}
+
+	return rc;
+}
+
+EXPORT_SYMBOL(dma_map_mem);
+
+/****************************************************************************/
+/**
+*   Setup a descriptor ring for a given memory map.
+*
+*   It is assumed that the descriptor ring has already been initialized, and
+*   this routine will only reallocate a new descriptor ring if the existing
+*   one is too small.
+*
+*   @return     0 on success, error code otherwise.
+*/
+/****************************************************************************/
+
+int dma_map_create_descriptor_ring(DMA_Device_t dev,	/* DMA device (where the ring is stored) */
+				   DMA_MemMap_t *memMap,	/* Memory map that will be used */
+				   dma_addr_t devPhysAddr	/* Physical address of device */
+    ) {
+	int rc;
+	int numDescriptors;
+	DMA_DeviceAttribute_t *devAttr;
+	DMA_Region_t *region;
+	DMA_Segment_t *segment;
+	dma_addr_t srcPhysAddr;
+	dma_addr_t dstPhysAddr;
+	int regionIdx;
+	int segmentIdx;
+
+	devAttr = &DMA_gDeviceAttribute[dev];
+
+	down(&memMap->lock);
+
+	/* Figure out how many descriptors we need */
+
+	numDescriptors = 0;
+	for (regionIdx = 0; regionIdx < memMap->numRegionsUsed; regionIdx++) {
+		region = &memMap->region[regionIdx];
+
+		for (segmentIdx = 0; segmentIdx < region->numSegmentsUsed;
+		     segmentIdx++) {
+			segment = &region->segment[segmentIdx];
+
+			if (memMap->dir == DMA_TO_DEVICE) {
+				srcPhysAddr = segment->physAddr;
+				dstPhysAddr = devPhysAddr;
+			} else {
+				srcPhysAddr = devPhysAddr;
+				dstPhysAddr = segment->physAddr;
+			}
+
+			rc =
+			     dma_calculate_descriptor_count(dev, srcPhysAddr,
+							    dstPhysAddr,
+							    segment->
+							    numBytes);
+			if (rc < 0) {
+				printk(KERN_ERR
+				       "%s: dma_calculate_descriptor_count failed: %d\n",
+				       __func__, rc);
+				goto out;
+			}
+			numDescriptors += rc;
+		}
+	}
+
+	/* Adjust the size of the ring, if it isn't big enough */
+
+	if (numDescriptors > devAttr->ring.descriptorsAllocated) {
+		dma_free_descriptor_ring(&devAttr->ring);
+		rc =
+		     dma_alloc_descriptor_ring(&devAttr->ring,
+					       numDescriptors);
+		if (rc < 0) {
+			printk(KERN_ERR
+			       "%s: dma_alloc_descriptor_ring failed: %d\n",
+			       __func__, rc);
+			goto out;
+		}
+	} else {
+		rc =
+		     dma_init_descriptor_ring(&devAttr->ring,
+					      numDescriptors);
+		if (rc < 0) {
+			printk(KERN_ERR
+			       "%s: dma_init_descriptor_ring failed: %d\n",
+			       __func__, rc);
+			goto out;
+		}
+	}
+
+	/* Populate the descriptors */
+
+	for (regionIdx = 0; regionIdx < memMap->numRegionsUsed; regionIdx++) {
+		region = &memMap->region[regionIdx];
+
+		for (segmentIdx = 0; segmentIdx < region->numSegmentsUsed;
+		     segmentIdx++) {
+			segment = &region->segment[segmentIdx];
+
+			if (memMap->dir == DMA_TO_DEVICE) {
+				srcPhysAddr = segment->physAddr;
+				dstPhysAddr = devPhysAddr;
+			} else {
+				srcPhysAddr = devPhysAddr;
+				dstPhysAddr = segment->physAddr;
+			}
+
+			rc =
+			     dma_add_descriptors(&devAttr->ring, dev,
+						 srcPhysAddr, dstPhysAddr,
+						 segment->numBytes);
+			if (rc < 0) {
+				printk(KERN_ERR
+				       "%s: dma_add_descriptors failed: %d\n",
+				       __func__, rc);
+				goto out;
+			}
+		}
+	}
+
+	rc = 0;
+
+out:
+
+	up(&memMap->lock);
+	return rc;
+}
+
+EXPORT_SYMBOL(dma_map_create_descriptor_ring);
+
+/****************************************************************************/
+/**
+*   Maps in a memory region such that it can be used for performing a DMA.
+*
+*   @return
+*/
+/****************************************************************************/
+
+int dma_unmap(DMA_MemMap_t *memMap,	/* Stores state information about the map */
+	      int dirtied	/* non-zero if any of the pages were modified */
+    ) {
+	int regionIdx;
+	int segmentIdx;
+	DMA_Region_t *region;
+	DMA_Segment_t *segment;
+
+	for (regionIdx = 0; regionIdx < memMap->numRegionsUsed; regionIdx++) {
+		region = &memMap->region[regionIdx];
+
+		for (segmentIdx = 0; segmentIdx < region->numSegmentsUsed;
+		     segmentIdx++) {
+			segment = &region->segment[segmentIdx];
+
+			switch (region->memType) {
+			case DMA_MEM_TYPE_VMALLOC:
+				{
+					printk(KERN_ERR
+					       "%s: vmalloc'd pages are not yet supported\n",
+					       __func__);
+					return -EINVAL;
+				}
+
+			case DMA_MEM_TYPE_KMALLOC:
+				{
+#if ALLOW_MAP_OF_KMALLOC_MEMORY
+					dma_unmap_single(NULL,
+							 segment->physAddr,
+							 segment->numBytes,
+							 memMap->dir);
+#endif
+					break;
+				}
+
+			case DMA_MEM_TYPE_DMA:
+				{
+					dma_sync_single_for_cpu(NULL,
+								segment->
+								physAddr,
+								segment->
+								numBytes,
+								memMap->dir);
+					break;
+				}
+
+			case DMA_MEM_TYPE_USER:
+				{
+					/* Nothing to do here. */
+
+					break;
+				}
+
+			default:
+				{
+					printk(KERN_ERR
+					       "%s: Unsupported memory type: %d\n",
+					       __func__, region->memType);
+					return -EINVAL;
+				}
+			}
+
+			segment->virtAddr = NULL;
+			segment->physAddr = 0;
+			segment->numBytes = 0;
+		}
+
+		if (region->numLockedPages > 0) {
+			int pageIdx;
+
+			/* Some user pages were locked. We need to go and unlock them now. */
+
+			for (pageIdx = 0; pageIdx < region->numLockedPages;
+			     pageIdx++) {
+				struct page *page =
+				    region->lockedPages[pageIdx];
+
+				if (memMap->dir == DMA_FROM_DEVICE) {
+					SetPageDirty(page);
+				}
+				page_cache_release(page);
+			}
+			kfree(region->lockedPages);
+			region->numLockedPages = 0;
+			region->lockedPages = NULL;
+		}
+
+		region->memType = DMA_MEM_TYPE_NONE;
+		region->virtAddr = NULL;
+		region->numBytes = 0;
+		region->numSegmentsUsed = 0;
+	}
+	memMap->userTask = NULL;
+	memMap->numRegionsUsed = 0;
+	memMap->inUse = 0;
+
+	up(&memMap->lock);
+
+	return 0;
+}
+
+EXPORT_SYMBOL(dma_unmap);
diff --git a/arch/arm/mach-bcmring/dma_device.c b/arch/arm/mach-bcmring/dma_device.c
new file mode 100644
index 000000000000..ca0ad736870b
--- /dev/null
+++ b/arch/arm/mach-bcmring/dma_device.c
@@ -0,0 +1,593 @@
+/*****************************************************************************
+* Copyright 2004 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*   @file   dma_device.c
+*
+*   @brief  private array of DMA_DeviceAttribute_t
+*/
+/****************************************************************************/
+
+DMA_DeviceAttribute_t DMA_gDeviceAttribute[DMA_NUM_DEVICE_ENTRIES] = {
+	[DMA_DEVICE_MEM_TO_MEM] =	/* MEM 2 MEM */
+	{
+	 .flags = DMA_DEVICE_FLAG_ON_DMA0 | DMA_DEVICE_FLAG_ON_DMA1,
+	 .name = "mem-to-mem",
+	 .config = {
+		    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+		    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+		    .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_MEM,
+		    .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST,
+		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
+		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
+		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
+
+		    },
+	 },
+	[DMA_DEVICE_VPM_MEM_TO_MEM] =	/* VPM */
+	{
+	 .flags = DMA_DEVICE_FLAG_IS_DEDICATED | DMA_DEVICE_FLAG_NO_ISR,
+	 .name = "vpm",
+	 .dedicatedController = 0,
+	 .dedicatedChannel = 0,
+	 /* reserve DMA0:0 for VPM */
+	 },
+	[DMA_DEVICE_NAND_MEM_TO_MEM] =	/* NAND */
+	{
+	 .flags = DMA_DEVICE_FLAG_ON_DMA0 | DMA_DEVICE_FLAG_ON_DMA1,
+	 .name = "nand",
+	 .config = {
+		    .srcPeripheralPort = 0,
+		    .dstPeripheralPort = 0,
+		    .srcStatusRegisterAddress = 0x00000000,
+		    .dstStatusRegisterAddress = 0x00000000,
+		    .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_MEM,
+		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
+		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32,
+		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_32,
+		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
+		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
+		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .channelPriority = dmacHw_CHANNEL_PRIORITY_6,
+		    },
+	 },
+	[DMA_DEVICE_PIF_MEM_TO_DEV] =	/* PIF TX */
+	{
+	 .flags = DMA_DEVICE_FLAG_ON_DMA0 | DMA_DEVICE_FLAG_ON_DMA1
+	 | DMA_DEVICE_FLAG_ALLOW_LARGE_FIFO
+	 | DMA_DEVICE_FLAG_ALLOC_DMA1_FIRST | DMA_DEVICE_FLAG_PORT_PER_DMAC,
+	 .name = "pif_tx",
+	 .dmacPort = {14, 5},
+	 .config = {
+		    .srcPeripheralPort = 0,	/* SRC: memory */
+		    /* dstPeripheralPort          = 5 or 14 */
+		    .srcStatusRegisterAddress = 0x00000000,
+		    .dstStatusRegisterAddress = 0x00000000,
+		    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+		    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+		    .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
+		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
+		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_2,
+		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
+		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_32,
+		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_8,
+		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_8,
+		    .maxDataPerBlock = 16256,
+		    },
+	 },
+	[DMA_DEVICE_PIF_DEV_TO_MEM] =	/* PIF RX */
+	{
+	 .flags = DMA_DEVICE_FLAG_ON_DMA0 | DMA_DEVICE_FLAG_ON_DMA1
+	 | DMA_DEVICE_FLAG_ALLOW_LARGE_FIFO
+	 /* DMA_DEVICE_FLAG_ALLOC_DMA1_FIRST */
+	 | DMA_DEVICE_FLAG_PORT_PER_DMAC,
+	 .name = "pif_rx",
+	 .dmacPort = {14, 5},
+	 .config = {
+		    /* srcPeripheralPort          = 5 or 14 */
+		    .dstPeripheralPort = 0,	/* DST: memory */
+		    .srcStatusRegisterAddress = 0x00000000,
+		    .dstStatusRegisterAddress = 0x00000000,
+		    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+		    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+		    .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
+		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
+		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32,
+		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
+		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_8,
+		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_8,
+		    .maxDataPerBlock = 16256,
+		    },
+	 },
+	[DMA_DEVICE_I2S0_DEV_TO_MEM] =	/* I2S RX */
+	{
+	 .flags = DMA_DEVICE_FLAG_ON_DMA0,
+	 .name = "i2s0_rx",
+	 .config = {
+		    .srcPeripheralPort = 0,	/* SRC: I2S0 */
+		    .dstPeripheralPort = 0,	/* DST: memory */
+		    .srcStatusRegisterAddress = 0,
+		    .dstStatusRegisterAddress = 0,
+		    .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
+		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
+		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_16,
+		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
+		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
+		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_0,
+		    .blockTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .completeTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+		    .transferMode = dmacHw_TRANSFER_MODE_CONTINUOUS,
+		    },
+	 },
+	[DMA_DEVICE_I2S0_MEM_TO_DEV] =	/* I2S TX */
+	{
+	 .flags = DMA_DEVICE_FLAG_ON_DMA0,
+	 .name = "i2s0_tx",
+	 .config = {
+		    .srcPeripheralPort = 0,	/* SRC: memory */
+		    .dstPeripheralPort = 1,	/* DST: I2S0 */
+		    .srcStatusRegisterAddress = 0,
+		    .dstStatusRegisterAddress = 0,
+		    .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
+		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
+		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
+		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_16,
+		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_0,
+		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
+		    .blockTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+		    .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST,
+		    },
+	 },
+	[DMA_DEVICE_I2S1_DEV_TO_MEM] =	/* I2S1 RX */
+	{
+	 .flags = DMA_DEVICE_FLAG_ON_DMA1,
+	 .name = "i2s1_rx",
+	 .config = {
+		    .srcPeripheralPort = 2,	/* SRC: I2S1 */
+		    .dstPeripheralPort = 0,	/* DST: memory */
+		    .srcStatusRegisterAddress = 0,
+		    .dstStatusRegisterAddress = 0,
+		    .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
+		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
+		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_16,
+		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
+		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
+		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_0,
+		    .blockTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .completeTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+		    .transferMode = dmacHw_TRANSFER_MODE_CONTINUOUS,
+		    },
+	 },
+	[DMA_DEVICE_I2S1_MEM_TO_DEV] =	/* I2S1 TX */
+	{
+	 .flags = DMA_DEVICE_FLAG_ON_DMA1,
+	 .name = "i2s1_tx",
+	 .config = {
+		    .srcPeripheralPort = 0,	/* SRC: memory */
+		    .dstPeripheralPort = 3,	/* DST: I2S1 */
+		    .srcStatusRegisterAddress = 0,
+		    .dstStatusRegisterAddress = 0,
+		    .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
+		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
+		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
+		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_16,
+		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_0,
+		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
+		    .blockTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+		    .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST,
+		    },
+	 },
+	[DMA_DEVICE_ESW_MEM_TO_DEV] =	/* ESW TX */
+	{
+	 .name = "esw_tx",
+	 .flags = DMA_DEVICE_FLAG_IS_DEDICATED,
+	 .dedicatedController = 1,
+	 .dedicatedChannel = 3,
+	 .config = {
+		    .srcPeripheralPort = 0,	/* SRC: memory */
+		    .dstPeripheralPort = 1,	/* DST: ESW (MTP) */
+		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .errorInterrupt = dmacHw_INTERRUPT_DISABLE,
+		    /* DMAx_AHB_SSTATARy */
+		    .srcStatusRegisterAddress = 0x00000000,
+		    /* DMAx_AHB_DSTATARy */
+		    .dstStatusRegisterAddress = 0x30490010,
+		    /* DMAx_AHB_CFGy */
+		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+		    /* DMAx_AHB_CTLy */
+		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
+		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+		    .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
+		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_0,
+		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_8,
+		    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+		    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
+		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
+		    },
+	 },
+	[DMA_DEVICE_ESW_DEV_TO_MEM] =	/* ESW RX */
+	{
+	 .name = "esw_rx",
+	 .flags = DMA_DEVICE_FLAG_IS_DEDICATED,
+	 .dedicatedController = 1,
+	 .dedicatedChannel = 2,
+	 .config = {
+		    .srcPeripheralPort = 0,	/* SRC: ESW (PTM) */
+		    .dstPeripheralPort = 0,	/* DST: memory */
+		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .errorInterrupt = dmacHw_INTERRUPT_DISABLE,
+		    /* DMAx_AHB_SSTATARy */
+		    .srcStatusRegisterAddress = 0x30480010,
+		    /* DMAx_AHB_DSTATARy */
+		    .dstStatusRegisterAddress = 0x00000000,
+		    /* DMAx_AHB_CFGy */
+		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+		    /* DMAx_AHB_CTLy */
+		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
+		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+		    .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
+		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_8,
+		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_0,
+		    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+		    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
+		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
+		    },
+	 },
+	[DMA_DEVICE_APM_CODEC_A_DEV_TO_MEM] =	/* APM Codec A Ingress */
+	{
+	 .flags = DMA_DEVICE_FLAG_ON_DMA0,
+	 .name = "apm_a_rx",
+	 .config = {
+		    .srcPeripheralPort = 2,	/* SRC: Codec A Ingress FIFO */
+		    .dstPeripheralPort = 0,	/* DST: memory */
+		    .srcStatusRegisterAddress = 0x00000000,
+		    .dstStatusRegisterAddress = 0x00000000,
+		    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+		    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+		    .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
+		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
+		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+		    .blockTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .completeTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32,
+		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
+		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
+		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
+		    .transferMode = dmacHw_TRANSFER_MODE_CONTINUOUS,
+		    },
+	 },
+	[DMA_DEVICE_APM_CODEC_A_MEM_TO_DEV] =	/* APM Codec A Egress */
+	{
+	 .flags = DMA_DEVICE_FLAG_ON_DMA0,
+	 .name = "apm_a_tx",
+	 .config = {
+		    .srcPeripheralPort = 0,	/* SRC: memory */
+		    .dstPeripheralPort = 3,	/* DST: Codec A Egress FIFO */
+		    .srcStatusRegisterAddress = 0x00000000,
+		    .dstStatusRegisterAddress = 0x00000000,
+		    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+		    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+		    .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
+		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
+		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_2,
+		    .blockTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
+		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_32,
+		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
+		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
+		    .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST,
+		    },
+	 },
+	[DMA_DEVICE_APM_CODEC_B_DEV_TO_MEM] =	/* APM Codec B Ingress */
+	{
+	 .flags = DMA_DEVICE_FLAG_ON_DMA0,
+	 .name = "apm_b_rx",
+	 .config = {
+		    .srcPeripheralPort = 4,	/* SRC: Codec B Ingress FIFO */
+		    .dstPeripheralPort = 0,	/* DST: memory */
+		    .srcStatusRegisterAddress = 0x00000000,
+		    .dstStatusRegisterAddress = 0x00000000,
+		    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+		    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+		    .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
+		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
+		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+		    .blockTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .completeTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32,
+		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
+		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
+		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
+		    .transferMode = dmacHw_TRANSFER_MODE_CONTINUOUS,
+		    },
+	 },
+	[DMA_DEVICE_APM_CODEC_B_MEM_TO_DEV] =	/* APM Codec B Egress */
+	{
+	 .flags = DMA_DEVICE_FLAG_ON_DMA0,
+	 .name = "apm_b_tx",
+	 .config = {
+		    .srcPeripheralPort = 0,	/* SRC: memory */
+		    .dstPeripheralPort = 5,	/* DST: Codec B Egress FIFO */
+		    .srcStatusRegisterAddress = 0x00000000,
+		    .dstStatusRegisterAddress = 0x00000000,
+		    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+		    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+		    .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
+		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
+		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_2,
+		    .blockTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
+		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_32,
+		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
+		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
+		    .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST,
+		    },
+	 },
+	[DMA_DEVICE_APM_CODEC_C_DEV_TO_MEM] =	/* APM Codec C Ingress */
+	{
+	 .flags = DMA_DEVICE_FLAG_ON_DMA1,
+	 .name = "apm_c_rx",
+	 .config = {
+		    .srcPeripheralPort = 4,	/* SRC: Codec C Ingress FIFO */
+		    .dstPeripheralPort = 0,	/* DST: memory */
+		    .srcStatusRegisterAddress = 0x00000000,
+		    .dstStatusRegisterAddress = 0x00000000,
+		    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+		    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+		    .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
+		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
+		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+		    .blockTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .completeTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32,
+		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
+		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
+		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
+		    .transferMode = dmacHw_TRANSFER_MODE_CONTINUOUS,
+		    },
+	 },
+	[DMA_DEVICE_APM_PCM0_DEV_TO_MEM] =	/* PCM0 RX */
+	{
+	 .flags = DMA_DEVICE_FLAG_ON_DMA0,
+	 .name = "pcm0_rx",
+	 .config = {
+		    .srcPeripheralPort = 12,	/* SRC: PCM0 */
+		    .dstPeripheralPort = 0,	/* DST: memory */
+		    .srcStatusRegisterAddress = 0,
+		    .dstStatusRegisterAddress = 0,
+		    .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
+		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
+		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32,
+		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
+		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_8,
+		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
+		    .blockTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .completeTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+		    .transferMode = dmacHw_TRANSFER_MODE_CONTINUOUS,
+		    },
+	 },
+	[DMA_DEVICE_APM_PCM0_MEM_TO_DEV] =	/* PCM0 TX */
+	{
+	 .flags = DMA_DEVICE_FLAG_ON_DMA0,
+	 .name = "pcm0_tx",
+	 .config = {
+		    .srcPeripheralPort = 0,	/* SRC: memory */
+		    .dstPeripheralPort = 13,	/* DST: PCM0 */
+		    .srcStatusRegisterAddress = 0,
+		    .dstStatusRegisterAddress = 0,
+		    .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
+		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
+		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_2,
+		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
+		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_32,
+		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
+		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_8,
+		    .blockTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+		    .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST,
+		    },
+	 },
+	[DMA_DEVICE_APM_PCM1_DEV_TO_MEM] =	/* PCM1 RX */
+	{
+	 .flags = DMA_DEVICE_FLAG_ON_DMA1,
+	 .name = "pcm1_rx",
+	 .config = {
+		    .srcPeripheralPort = 14,	/* SRC: PCM1 */
+		    .dstPeripheralPort = 0,	/* DST: memory */
+		    .srcStatusRegisterAddress = 0,
+		    .dstStatusRegisterAddress = 0,
+		    .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
+		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
+		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32,
+		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
+		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_8,
+		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
+		    .blockTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .completeTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+		    .transferMode = dmacHw_TRANSFER_MODE_CONTINUOUS,
+		    },
+	 },
+	[DMA_DEVICE_APM_PCM1_MEM_TO_DEV] =	/* PCM1 TX */
+	{
+	 .flags = DMA_DEVICE_FLAG_ON_DMA1,
+	 .name = "pcm1_tx",
+	 .config = {
+		    .srcPeripheralPort = 0,	/* SRC: memory */
+		    .dstPeripheralPort = 15,	/* DST: PCM1 */
+		    .srcStatusRegisterAddress = 0,
+		    .dstStatusRegisterAddress = 0,
+		    .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
+		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
+		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_2,
+		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
+		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_32,
+		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
+		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_8,
+		    .blockTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+		    .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST,
+		    },
+	 },
+	[DMA_DEVICE_SPUM_DEV_TO_MEM] =	/* SPUM RX */
+	{
+	 .flags = DMA_DEVICE_FLAG_ON_DMA0 | DMA_DEVICE_FLAG_ON_DMA1,
+	 .name = "spum_rx",
+	 .config = {
+		    .srcPeripheralPort = 6,	/* SRC: Codec A Ingress FIFO */
+		    .dstPeripheralPort = 0,	/* DST: memory */
+		    .srcStatusRegisterAddress = 0x00000000,
+		    .dstStatusRegisterAddress = 0x00000000,
+		    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+		    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+		    .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
+		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
+		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+		    .blockTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32,
+		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_32,
+		    /* Busrt size **MUST** be 16 for SPUM to work */
+		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_16,
+		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_16,
+		    .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST,
+		    /* on the RX side, SPU needs to be the flow controller */
+		    .flowControler = dmacHw_FLOW_CONTROL_PERIPHERAL,
+		    },
+	 },
+	[DMA_DEVICE_SPUM_MEM_TO_DEV] =	/* SPUM TX */
+	{
+	 .flags = DMA_DEVICE_FLAG_ON_DMA0 | DMA_DEVICE_FLAG_ON_DMA1,
+	 .name = "spum_tx",
+	 .config = {
+		    .srcPeripheralPort = 0,	/* SRC: memory */
+		    .dstPeripheralPort = 7,	/* DST: SPUM */
+		    .srcStatusRegisterAddress = 0x00000000,
+		    .dstStatusRegisterAddress = 0x00000000,
+		    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+		    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+		    .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
+		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
+		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_2,
+		    .blockTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32,
+		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_32,
+		    /* Busrt size **MUST** be 16 for SPUM to work */
+		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_16,
+		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_16,
+		    .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST,
+		    },
+	 },
+	[DMA_DEVICE_MEM_TO_VRAM] =	/* MEM 2 VRAM */
+	{
+	 .flags = DMA_DEVICE_FLAG_ON_DMA0 | DMA_DEVICE_FLAG_ON_DMA1,
+	 .name = "mem-to-vram",
+	 .config = {
+		    .srcPeripheralPort = 0,	/* SRC: memory */
+		    .srcStatusRegisterAddress = 0x00000000,
+		    .dstStatusRegisterAddress = 0x00000000,
+		    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+		    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+		    .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_MEM,
+		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
+		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_2,
+		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
+		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
+		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_8,
+		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_8,
+		    },
+	 },
+	[DMA_DEVICE_VRAM_TO_MEM] =	/* VRAM 2 MEM */
+	{
+	 .flags = DMA_DEVICE_FLAG_ON_DMA0 | DMA_DEVICE_FLAG_ON_DMA1,
+	 .name = "vram-to-mem",
+	 .config = {
+		    .dstPeripheralPort = 0,	/* DST: memory */
+		    .srcStatusRegisterAddress = 0x00000000,
+		    .dstStatusRegisterAddress = 0x00000000,
+		    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+		    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+		    .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_MEM,
+		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
+		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
+		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
+		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_8,
+		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_8,
+		    },
+	 },
+};
+EXPORT_SYMBOL(DMA_gDeviceAttribute);	/* primarily for dma-test.c */
diff --git a/arch/arm/mach-bcmring/include/cfg_global.h b/arch/arm/mach-bcmring/include/cfg_global.h
new file mode 100644
index 000000000000..f01da877148e
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/cfg_global.h
@@ -0,0 +1,13 @@
+#ifndef _CFG_GLOBAL_H_
+#define _CFG_GLOBAL_H_
+
+#include <cfg_global_defines.h>
+
+#define CFG_GLOBAL_CHIP                         BCM11107
+#define CFG_GLOBAL_CHIP_FAMILY                  CFG_GLOBAL_CHIP_FAMILY_BCMRING
+#define CFG_GLOBAL_CHIP_REV                     0xB0
+#define CFG_GLOBAL_RAM_SIZE                     0x10000000
+#define CFG_GLOBAL_RAM_BASE                     0x00000000
+#define CFG_GLOBAL_RAM_RESERVED_SIZE            0x000000
+
+#endif /* _CFG_GLOBAL_H_ */
diff --git a/arch/arm/mach-bcmring/include/cfg_global_defines.h b/arch/arm/mach-bcmring/include/cfg_global_defines.h
new file mode 100644
index 000000000000..b5beb0b30734
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/cfg_global_defines.h
@@ -0,0 +1,40 @@
+/*****************************************************************************
+* Copyright 2006 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#ifndef CFG_GLOBAL_DEFINES_H
+#define CFG_GLOBAL_DEFINES_H
+
+/* CHIP */
+#define BCM1103 1
+
+#define BCM1191 4
+#define BCM2153 5
+#define BCM2820 6
+
+#define BCM2826 8
+#define FPGA11107 9
+#define BCM11107   10
+#define BCM11109   11
+#define BCM11170   12
+#define BCM11110   13
+#define BCM11211   14
+
+/* CFG_GLOBAL_CHIP_FAMILY types */
+#define CFG_GLOBAL_CHIP_FAMILY_NONE        0
+#define CFG_GLOBAL_CHIP_FAMILY_BCM116X     2
+#define CFG_GLOBAL_CHIP_FAMILY_BCMRING     4
+#define CFG_GLOBAL_CHIP_FAMILY_BCM1103     8
+
+#define IMAGE_HEADER_SIZE_CHECKSUM    4
+#endif
diff --git a/arch/arm/mach-bcmring/include/csp/cache.h b/arch/arm/mach-bcmring/include/csp/cache.h
new file mode 100644
index 000000000000..caa20e59db99
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/csp/cache.h
@@ -0,0 +1,35 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#ifndef CSP_CACHE_H
+#define CSP_CACHE_H
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#include <csp/stdint.h>
+
+/* ---- Public Constants and Types --------------------------------------- */
+
+#if defined(__KERNEL__) && !defined(STANDALONE)
+#include <asm/cacheflush.h>
+
+#define CSP_CACHE_FLUSH_ALL      flush_cache_all()
+
+#else
+
+#define CSP_CACHE_FLUSH_ALL
+
+#endif
+
+#endif /* CSP_CACHE_H */
diff --git a/arch/arm/mach-bcmring/include/csp/delay.h b/arch/arm/mach-bcmring/include/csp/delay.h
new file mode 100644
index 000000000000..8b3d80367293
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/csp/delay.h
@@ -0,0 +1,36 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+
+#ifndef CSP_DELAY_H
+#define CSP_DELAY_H
+
+/* ---- Include Files ---------------------------------------------------- */
+
+/* Some CSP routines require use of the following delay routines. Use the OS */
+/* version if available, otherwise use a CSP specific definition. */
+/* void udelay(unsigned long usecs); */
+/* void mdelay(unsigned long msecs); */
+
+#if defined(__KERNEL__) && !defined(STANDALONE)
+   #include <linux/delay.h>
+#else
+   #include <mach/csp/delay.h>
+#endif
+
+/* ---- Public Constants and Types --------------------------------------- */
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+
+#endif /*  CSP_DELAY_H */
diff --git a/arch/arm/mach-bcmring/include/csp/dmacHw.h b/arch/arm/mach-bcmring/include/csp/dmacHw.h
new file mode 100644
index 000000000000..5d510130a25f
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/csp/dmacHw.h
@@ -0,0 +1,596 @@
+/*****************************************************************************
+* Copyright 2004 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*  @file    dmacHw.h
+*
+*  @brief   API definitions for low level DMA controller driver
+*
+*/
+/****************************************************************************/
+#ifndef _DMACHW_H
+#define _DMACHW_H
+
+#include <stddef.h>
+
+#include <csp/stdint.h>
+#include <mach/csp/dmacHw_reg.h>
+
+/* Define DMA Channel ID using DMA controller number (m) and channel number (c).
+
+   System specific channel ID should be defined as follows
+
+   For example:
+
+   #include <dmacHw.h>
+   ...
+   #define systemHw_LCD_CHANNEL_ID                dmacHw_MAKE_CHANNEL_ID(0,5)
+   #define systemHw_SWITCH_RX_CHANNEL_ID          dmacHw_MAKE_CHANNEL_ID(0,0)
+   #define systemHw_SWITCH_TX_CHANNEL_ID          dmacHw_MAKE_CHANNEL_ID(0,1)
+   #define systemHw_APM_RX_CHANNEL_ID             dmacHw_MAKE_CHANNEL_ID(0,3)
+   #define systemHw_APM_TX_CHANNEL_ID             dmacHw_MAKE_CHANNEL_ID(0,4)
+   ...
+   #define systemHw_SHARED1_CHANNEL_ID            dmacHw_MAKE_CHANNEL_ID(1,4)
+   #define systemHw_SHARED2_CHANNEL_ID            dmacHw_MAKE_CHANNEL_ID(1,5)
+   #define systemHw_SHARED3_CHANNEL_ID            dmacHw_MAKE_CHANNEL_ID(0,6)
+   ...
+*/
+#define dmacHw_MAKE_CHANNEL_ID(m, c)         (m << 8 | c)
+
+typedef enum {
+	dmacHw_CHANNEL_PRIORITY_0 = dmacHw_REG_CFG_LO_CH_PRIORITY_0,	/* Channel priority 0. Lowest priority DMA channel */
+	dmacHw_CHANNEL_PRIORITY_1 = dmacHw_REG_CFG_LO_CH_PRIORITY_1,	/* Channel priority 1 */
+	dmacHw_CHANNEL_PRIORITY_2 = dmacHw_REG_CFG_LO_CH_PRIORITY_2,	/* Channel priority 2 */
+	dmacHw_CHANNEL_PRIORITY_3 = dmacHw_REG_CFG_LO_CH_PRIORITY_3,	/* Channel priority 3 */
+	dmacHw_CHANNEL_PRIORITY_4 = dmacHw_REG_CFG_LO_CH_PRIORITY_4,	/* Channel priority 4 */
+	dmacHw_CHANNEL_PRIORITY_5 = dmacHw_REG_CFG_LO_CH_PRIORITY_5,	/* Channel priority 5 */
+	dmacHw_CHANNEL_PRIORITY_6 = dmacHw_REG_CFG_LO_CH_PRIORITY_6,	/* Channel priority 6 */
+	dmacHw_CHANNEL_PRIORITY_7 = dmacHw_REG_CFG_LO_CH_PRIORITY_7	/* Channel priority 7. Highest priority DMA channel */
+} dmacHw_CHANNEL_PRIORITY_e;
+
+/* Source destination master interface */
+typedef enum {
+	dmacHw_SRC_MASTER_INTERFACE_1 = dmacHw_REG_CTL_SMS_1,	/* Source DMA master interface 1 */
+	dmacHw_SRC_MASTER_INTERFACE_2 = dmacHw_REG_CTL_SMS_2,	/* Source DMA master interface 2 */
+	dmacHw_DST_MASTER_INTERFACE_1 = dmacHw_REG_CTL_DMS_1,	/* Destination DMA master interface 1 */
+	dmacHw_DST_MASTER_INTERFACE_2 = dmacHw_REG_CTL_DMS_2	/* Destination DMA master interface 2 */
+} dmacHw_MASTER_INTERFACE_e;
+
+typedef enum {
+	dmacHw_SRC_TRANSACTION_WIDTH_8 = dmacHw_REG_CTL_SRC_TR_WIDTH_8,	/* Source 8 bit  (1 byte) per transaction */
+	dmacHw_SRC_TRANSACTION_WIDTH_16 = dmacHw_REG_CTL_SRC_TR_WIDTH_16,	/* Source 16 bit (2 byte) per transaction */
+	dmacHw_SRC_TRANSACTION_WIDTH_32 = dmacHw_REG_CTL_SRC_TR_WIDTH_32,	/* Source 32 bit (4 byte) per transaction */
+	dmacHw_SRC_TRANSACTION_WIDTH_64 = dmacHw_REG_CTL_SRC_TR_WIDTH_64,	/* Source 64 bit (8 byte) per transaction */
+	dmacHw_DST_TRANSACTION_WIDTH_8 = dmacHw_REG_CTL_DST_TR_WIDTH_8,	/* Destination 8 bit  (1 byte) per transaction */
+	dmacHw_DST_TRANSACTION_WIDTH_16 = dmacHw_REG_CTL_DST_TR_WIDTH_16,	/* Destination 16 bit (2 byte) per transaction */
+	dmacHw_DST_TRANSACTION_WIDTH_32 = dmacHw_REG_CTL_DST_TR_WIDTH_32,	/* Destination 32 bit (4 byte) per transaction */
+	dmacHw_DST_TRANSACTION_WIDTH_64 = dmacHw_REG_CTL_DST_TR_WIDTH_64	/* Destination 64 bit (8 byte) per transaction */
+} dmacHw_TRANSACTION_WIDTH_e;
+
+typedef enum {
+	dmacHw_SRC_BURST_WIDTH_0 = dmacHw_REG_CTL_SRC_MSIZE_0,	/* Source No burst */
+	dmacHw_SRC_BURST_WIDTH_4 = dmacHw_REG_CTL_SRC_MSIZE_4,	/* Source 4  X dmacHw_TRANSACTION_WIDTH_xxx bytes per burst */
+	dmacHw_SRC_BURST_WIDTH_8 = dmacHw_REG_CTL_SRC_MSIZE_8,	/* Source 8  X dmacHw_TRANSACTION_WIDTH_xxx bytes per burst */
+	dmacHw_SRC_BURST_WIDTH_16 = dmacHw_REG_CTL_SRC_MSIZE_16,	/* Source 16 X dmacHw_TRANSACTION_WIDTH_xxx bytes per burst */
+	dmacHw_DST_BURST_WIDTH_0 = dmacHw_REG_CTL_DST_MSIZE_0,	/* Destination No burst */
+	dmacHw_DST_BURST_WIDTH_4 = dmacHw_REG_CTL_DST_MSIZE_4,	/* Destination 4  X dmacHw_TRANSACTION_WIDTH_xxx bytes per burst */
+	dmacHw_DST_BURST_WIDTH_8 = dmacHw_REG_CTL_DST_MSIZE_8,	/* Destination 8  X dmacHw_TRANSACTION_WIDTH_xxx bytes per burst */
+	dmacHw_DST_BURST_WIDTH_16 = dmacHw_REG_CTL_DST_MSIZE_16	/* Destination 16 X dmacHw_TRANSACTION_WIDTH_xxx bytes per burst */
+} dmacHw_BURST_WIDTH_e;
+
+typedef enum {
+	dmacHw_TRANSFER_TYPE_MEM_TO_MEM = dmacHw_REG_CTL_TTFC_MM_DMAC,	/* Memory to memory transfer */
+	dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM = dmacHw_REG_CTL_TTFC_PM_DMAC,	/* Peripheral to memory transfer */
+	dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL = dmacHw_REG_CTL_TTFC_MP_DMAC,	/* Memory to peripheral transfer */
+	dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_PERIPHERAL = dmacHw_REG_CTL_TTFC_PP_DMAC	/* Peripheral to peripheral transfer */
+} dmacHw_TRANSFER_TYPE_e;
+
+typedef enum {
+	dmacHw_TRANSFER_MODE_PERREQUEST,	/* Block transfer per DMA request */
+	dmacHw_TRANSFER_MODE_CONTINUOUS,	/* Continuous transfer of streaming data */
+	dmacHw_TRANSFER_MODE_PERIODIC	/* Periodic transfer of streaming data */
+} dmacHw_TRANSFER_MODE_e;
+
+typedef enum {
+	dmacHw_SRC_ADDRESS_UPDATE_MODE_INC = dmacHw_REG_CTL_SINC_INC,	/* Increment source address after every transaction */
+	dmacHw_SRC_ADDRESS_UPDATE_MODE_DEC = dmacHw_REG_CTL_SINC_DEC,	/* Decrement source address after every transaction */
+	dmacHw_DST_ADDRESS_UPDATE_MODE_INC = dmacHw_REG_CTL_DINC_INC,	/* Increment destination address after every transaction */
+	dmacHw_DST_ADDRESS_UPDATE_MODE_DEC = dmacHw_REG_CTL_DINC_DEC,	/* Decrement destination address after every transaction */
+	dmacHw_SRC_ADDRESS_UPDATE_MODE_NC = dmacHw_REG_CTL_SINC_NC,	/* No change in source address after every transaction */
+	dmacHw_DST_ADDRESS_UPDATE_MODE_NC = dmacHw_REG_CTL_DINC_NC	/* No change in destination address after every transaction */
+} dmacHw_ADDRESS_UPDATE_MODE_e;
+
+typedef enum {
+	dmacHw_FLOW_CONTROL_DMA,	/* DMA working as flow controller (default) */
+	dmacHw_FLOW_CONTROL_PERIPHERAL	/* Peripheral working as flow controller */
+} dmacHw_FLOW_CONTROL_e;
+
+typedef enum {
+	dmacHw_TRANSFER_STATUS_BUSY,	/* DMA Transfer ongoing */
+	dmacHw_TRANSFER_STATUS_DONE,	/* DMA Transfer completed */
+	dmacHw_TRANSFER_STATUS_ERROR	/* DMA Transfer error */
+} dmacHw_TRANSFER_STATUS_e;
+
+typedef enum {
+	dmacHw_INTERRUPT_DISABLE,	/* Interrupt disable  */
+	dmacHw_INTERRUPT_ENABLE	/* Interrupt enable */
+} dmacHw_INTERRUPT_e;
+
+typedef enum {
+	dmacHw_INTERRUPT_STATUS_NONE = 0x0,	/* No DMA interrupt */
+	dmacHw_INTERRUPT_STATUS_TRANS = 0x1,	/* End of DMA transfer interrupt */
+	dmacHw_INTERRUPT_STATUS_BLOCK = 0x2,	/* End of block transfer interrupt */
+	dmacHw_INTERRUPT_STATUS_ERROR = 0x4	/* Error interrupt */
+} dmacHw_INTERRUPT_STATUS_e;
+
+typedef enum {
+	dmacHw_CONTROLLER_ATTRIB_CHANNEL_NUM,	/* Number of DMA channel */
+	dmacHw_CONTROLLER_ATTRIB_CHANNEL_MAX_BLOCK_SIZE,	/* Maximum channel burst size */
+	dmacHw_CONTROLLER_ATTRIB_MASTER_INTF_NUM,	/* Number of DMA master interface */
+	dmacHw_CONTROLLER_ATTRIB_CHANNEL_BUS_WIDTH,	/* Channel Data bus width */
+	dmacHw_CONTROLLER_ATTRIB_CHANNEL_FIFO_SIZE	/* Channel FIFO size */
+} dmacHw_CONTROLLER_ATTRIB_e;
+
+typedef unsigned long dmacHw_HANDLE_t;	/* DMA channel handle */
+typedef uint32_t dmacHw_ID_t;	/* DMA channel Id.  Must be created using
+				   "dmacHw_MAKE_CHANNEL_ID" macro
+				 */
+/* DMA channel configuration parameters */
+typedef struct {
+	uint32_t srcPeripheralPort;	/* Source peripheral port */
+	uint32_t dstPeripheralPort;	/* Destination peripheral port */
+	uint32_t srcStatusRegisterAddress;	/* Source status register address */
+	uint32_t dstStatusRegisterAddress;	/* Destination status register address of type  */
+
+	uint32_t srcGatherWidth;	/* Number of bytes gathered before successive gather opearation */
+	uint32_t srcGatherJump;	/* Number of bytes jumpped before successive gather opearation */
+	uint32_t dstScatterWidth;	/* Number of bytes sacattered before successive scatter opearation */
+	uint32_t dstScatterJump;	/* Number of bytes jumpped  before successive scatter opearation */
+	uint32_t maxDataPerBlock;	/* Maximum number of bytes to be transferred per block/descrptor.
+					   0 = Maximum possible.
+					 */
+
+	dmacHw_ADDRESS_UPDATE_MODE_e srcUpdate;	/* Source address update mode */
+	dmacHw_ADDRESS_UPDATE_MODE_e dstUpdate;	/* Destination address update mode */
+	dmacHw_TRANSFER_TYPE_e transferType;	/* DMA transfer type  */
+	dmacHw_TRANSFER_MODE_e transferMode;	/* DMA transfer mode */
+	dmacHw_MASTER_INTERFACE_e srcMasterInterface;	/* DMA source interface  */
+	dmacHw_MASTER_INTERFACE_e dstMasterInterface;	/* DMA destination interface */
+	dmacHw_TRANSACTION_WIDTH_e srcMaxTransactionWidth;	/* Source transaction width   */
+	dmacHw_TRANSACTION_WIDTH_e dstMaxTransactionWidth;	/* Destination transaction width */
+	dmacHw_BURST_WIDTH_e srcMaxBurstWidth;	/* Source burst width */
+	dmacHw_BURST_WIDTH_e dstMaxBurstWidth;	/* Destination burst width */
+	dmacHw_INTERRUPT_e blockTransferInterrupt;	/* Block trsnafer interrupt */
+	dmacHw_INTERRUPT_e completeTransferInterrupt;	/* Complete DMA trsnafer interrupt */
+	dmacHw_INTERRUPT_e errorInterrupt;	/* Error interrupt */
+	dmacHw_CHANNEL_PRIORITY_e channelPriority;	/* Channel priority */
+	dmacHw_FLOW_CONTROL_e flowControler;	/* Data flow controller */
+} dmacHw_CONFIG_t;
+
+/****************************************************************************/
+/**
+*  @brief   Initializes DMA
+*
+*  This function initializes DMA CSP driver
+*
+*  @note
+*     Must be called before using any DMA channel
+*/
+/****************************************************************************/
+void dmacHw_initDma(void);
+
+/****************************************************************************/
+/**
+*  @brief   Exit function for  DMA
+*
+*  This function isolates DMA from the system
+*
+*/
+/****************************************************************************/
+void dmacHw_exitDma(void);
+
+/****************************************************************************/
+/**
+*  @brief   Gets a handle to a DMA channel
+*
+*  This function returns a handle, representing a control block of a particular DMA channel
+*
+*  @return  -1       - On Failure
+*            handle  - On Success, representing a channel control block
+*
+*  @note
+*     None  Channel ID must be created using "dmacHw_MAKE_CHANNEL_ID" macro
+*/
+/****************************************************************************/
+dmacHw_HANDLE_t dmacHw_getChannelHandle(dmacHw_ID_t channelId	/* [ IN ] DMA Channel Id */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Initializes a DMA channel for use
+*
+*  This function initializes and resets a DMA channel for use
+*
+*  @return  -1     - On Failure
+*            0     - On Success
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+int dmacHw_initChannel(dmacHw_HANDLE_t handle	/*  [ IN ] DMA Channel handle  */
+    );
+
+/****************************************************************************/
+/**
+*  @brief  Estimates number of descriptor needed to perform certain DMA transfer
+*
+*
+*  @return  On failure : -1
+*           On success : Number of descriptor count
+*
+*
+*/
+/****************************************************************************/
+int dmacHw_calculateDescriptorCount(dmacHw_CONFIG_t *pConfig,	/*   [ IN ] Configuration settings */
+				    void *pSrcAddr,	/*   [ IN ] Source (Peripheral/Memory) address */
+				    void *pDstAddr,	/*   [ IN ] Destination (Peripheral/Memory) address */
+				    size_t dataLen	/*   [ IN ] Data length in bytes */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Initializes descriptor ring
+*
+*  This function will initializes the descriptor ring of a DMA channel
+*
+*
+*  @return   -1 - On failure
+*             0 - On success
+*  @note
+*     - "len" parameter should be obtained from "dmacHw_descriptorLen"
+*     - Descriptor buffer MUST be 32 bit aligned and uncached as it
+*       is accessed by ARM and DMA
+*/
+/****************************************************************************/
+int dmacHw_initDescriptor(void *pDescriptorVirt,	/*  [ IN ] Virtual address of uncahced buffer allocated to form descriptor ring */
+			  uint32_t descriptorPhyAddr,	/*  [ IN ] Physical address of pDescriptorVirt (descriptor buffer) */
+			  uint32_t len,	/*  [ IN ] Size of the pBuf */
+			  uint32_t num	/*  [ IN ] Number of descriptor in the ring */
+    );
+
+/****************************************************************************/
+/**
+*  @brief  Finds amount of memory required to form a descriptor ring
+*
+*
+*  @return   Number of bytes required to form a descriptor ring
+*
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+uint32_t dmacHw_descriptorLen(uint32_t descCnt	/*  [ IN ] Number of descriptor in the ring */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Configure DMA channel
+*
+*  @return  0  : On success
+*           -1 : On failure
+*/
+/****************************************************************************/
+int dmacHw_configChannel(dmacHw_HANDLE_t handle,	/*  [ IN ] DMA Channel handle  */
+			 dmacHw_CONFIG_t *pConfig	/*   [ IN ] Configuration settings */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Set descriptors for known data length
+*
+*  When DMA has to work as a flow controller, this function prepares the
+*  descriptor chain to transfer data
+*
+*  from:
+*          - Memory to memory
+*          - Peripheral to memory
+*          - Memory to Peripheral
+*          - Peripheral to Peripheral
+*
+*  @return   -1 - On failure
+*             0 - On success
+*
+*/
+/****************************************************************************/
+int dmacHw_setDataDescriptor(dmacHw_CONFIG_t *pConfig,	/*  [ IN ] Configuration settings */
+			     void *pDescriptor,	/*  [ IN ] Descriptor buffer  */
+			     void *pSrcAddr,	/*  [ IN ] Source (Peripheral/Memory) address */
+			     void *pDstAddr,	/*  [ IN ] Destination (Peripheral/Memory) address */
+			     size_t dataLen	/*  [ IN ] Length in bytes   */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Indicates whether DMA transfer is in progress or completed
+*
+*  @return   DMA transfer status
+*          dmacHw_TRANSFER_STATUS_BUSY:         DMA Transfer ongoing
+*          dmacHw_TRANSFER_STATUS_DONE:         DMA Transfer completed
+*          dmacHw_TRANSFER_STATUS_ERROR:        DMA Transfer error
+*
+*/
+/****************************************************************************/
+dmacHw_TRANSFER_STATUS_e dmacHw_transferCompleted(dmacHw_HANDLE_t handle	/*   [ IN ] DMA Channel handle  */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Set descriptor carrying control information
+*
+*  This function will be used to send specific control information to the device
+*  using the DMA channel
+*
+*
+*  @return  -1 - On failure
+*            0 - On success
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+int dmacHw_setControlDescriptor(dmacHw_CONFIG_t *pConfig,	/*  [ IN ] Configuration settings */
+				void *pDescriptor,	/*  [ IN ] Descriptor buffer  */
+				uint32_t ctlAddress,	/*  [ IN ] Address of the device control register  */
+				uint32_t control	/*  [ IN ] Device control information */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Read data DMA transferred to memory
+*
+*  This function will read data that has been DMAed to memory while transfering from:
+*          - Memory to memory
+*          - Peripheral to memory
+*
+*  @return  0 - No more data is available to read
+*           1 - More data might be available to read
+*
+*/
+/****************************************************************************/
+int dmacHw_readTransferredData(dmacHw_HANDLE_t handle,	/*  [ IN ] DMA Channel handle    */
+			       dmacHw_CONFIG_t *pConfig,	/*  [ IN ]  Configuration settings */
+			       void *pDescriptor,	/*  [ IN ] Descriptor buffer  */
+			       void **ppBbuf,	/*  [ OUT ] Data received */
+			       size_t *pLlen	/*  [ OUT ] Length of the data received */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Prepares descriptor ring, when source peripheral working as a flow controller
+*
+*  This function will form the descriptor ring by allocating buffers, when source peripheral
+*  has to work as a flow controller to transfer data from:
+*           - Peripheral to memory.
+*
+*  @return  -1 - On failure
+*            0 - On success
+*
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+int dmacHw_setVariableDataDescriptor(dmacHw_HANDLE_t handle,	/*  [ IN ] DMA Channel handle   */
+				     dmacHw_CONFIG_t *pConfig,	/*  [ IN ] Configuration settings */
+				     void *pDescriptor,	/*  [ IN ] Descriptor buffer  */
+				     uint32_t srcAddr,	/*  [ IN ] Source peripheral address */
+				     void *(*fpAlloc) (int len),	/*  [ IN ] Function pointer  that provides destination memory */
+				     int len,	/*  [ IN ] Number of bytes "fpAlloc" will allocate for destination */
+				     int num	/*  [ IN ] Number of descriptor to set */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Program channel register to initiate transfer
+*
+*  @return  void
+*
+*
+*  @note
+*     - Descriptor buffer MUST ALWAYS be flushed before calling this function
+*     - This function should also be called from ISR to program the channel with
+*       pending descriptors
+*/
+/****************************************************************************/
+void dmacHw_initiateTransfer(dmacHw_HANDLE_t handle,	/*   [ IN ] DMA Channel handle */
+			     dmacHw_CONFIG_t *pConfig,	/*   [ IN ] Configuration settings */
+			     void *pDescriptor	/*   [ IN ] Descriptor buffer  */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Resets descriptor control information
+*
+*  @return  void
+*/
+/****************************************************************************/
+void dmacHw_resetDescriptorControl(void *pDescriptor	/*   [ IN ] Descriptor buffer  */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Program channel register to stop transfer
+*
+*  Ensures the channel is not doing any transfer after calling this function
+*
+*  @return  void
+*
+*/
+/****************************************************************************/
+void dmacHw_stopTransfer(dmacHw_HANDLE_t handle	/*   [ IN ] DMA Channel handle */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Check the existance of pending descriptor
+*
+*  This function confirmes if there is any pending descriptor in the chain
+*  to program the channel
+*
+*  @return  1 : Channel need to be programmed with pending descriptor
+*           0 : No more pending descriptor to programe the channel
+*
+*  @note
+*     - This function should be called from ISR in case there are pending
+*       descriptor to program the channel.
+*
+*     Example:
+*
+*     dmac_isr ()
+*     {
+*         ...
+*         if (dmacHw_descriptorPending (handle))
+*         {
+*            dmacHw_initiateTransfer (handle);
+*         }
+*     }
+*
+*/
+/****************************************************************************/
+uint32_t dmacHw_descriptorPending(dmacHw_HANDLE_t handle,	/*   [ IN ] DMA Channel handle */
+				  void *pDescriptor	/*   [ IN ] Descriptor buffer */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Deallocates source or destination memory, allocated
+*
+*  This function can be called to deallocate data memory that was DMAed successfully
+*
+*  @return  -1  - On failure
+*            0  - On success
+*
+*  @note
+*     This function will be called ONLY, when source OR destination address is pointing
+*     to dynamic memory
+*/
+/****************************************************************************/
+int dmacHw_freeMem(dmacHw_CONFIG_t *pConfig,	/*  [ IN ] Configuration settings */
+		   void *pDescriptor,	/*  [ IN ] Descriptor buffer  */
+		   void (*fpFree) (void *)	/*  [ IN ] Function pointer to free data memory */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Clears the interrupt
+*
+*  This function clears the DMA channel specific interrupt
+*
+*  @return   N/A
+*
+*  @note
+*     Must be called under the context of ISR
+*/
+/****************************************************************************/
+void dmacHw_clearInterrupt(dmacHw_HANDLE_t handle	/*  [ IN ] DMA Channel handle  */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Returns the cause of channel specific DMA interrupt
+*
+*  This function returns the cause of interrupt
+*
+*  @return  Interrupt status, each bit representing a specific type of interrupt
+*           of type dmacHw_INTERRUPT_STATUS_e
+*  @note
+*           This function should be called under the context of ISR
+*/
+/****************************************************************************/
+dmacHw_INTERRUPT_STATUS_e dmacHw_getInterruptStatus(dmacHw_HANDLE_t handle	/*  [ IN ] DMA Channel handle  */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Indentifies a DMA channel causing interrupt
+*
+*  This functions returns a channel causing interrupt of type dmacHw_INTERRUPT_STATUS_e
+*
+*  @return  NULL   : No channel causing DMA interrupt
+*           ! NULL : Handle to a channel causing DMA interrupt
+*  @note
+*     dmacHw_clearInterrupt() must be called with a valid handle after calling this function
+*/
+/****************************************************************************/
+dmacHw_HANDLE_t dmacHw_getInterruptSource(void);
+
+/****************************************************************************/
+/**
+*  @brief   Sets channel specific user data
+*
+*  This function associates user data to a specif DMA channel
+*
+*/
+/****************************************************************************/
+void dmacHw_setChannelUserData(dmacHw_HANDLE_t handle,	/*  [ IN ] DMA Channel handle  */
+			       void *userData	/*  [ IN ] User data  */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Gets channel specific user data
+*
+*  This function returns user data specific to a DMA channel
+*
+*  @return   user data
+*/
+/****************************************************************************/
+void *dmacHw_getChannelUserData(dmacHw_HANDLE_t handle	/*  [ IN ] DMA Channel handle  */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Displays channel specific registers and other control parameters
+*
+*
+*  @return  void
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+void dmacHw_printDebugInfo(dmacHw_HANDLE_t handle,	/*  [ IN ] DMA Channel handle  */
+			   void *pDescriptor,	/*  [ IN ] Descriptor buffer  */
+			   int (*fpPrint) (const char *, ...)	/*  [ IN ] Print callback function */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Provides DMA controller attributes
+*
+*
+*  @return  DMA controller attributes
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+uint32_t dmacHw_getDmaControllerAttribute(dmacHw_HANDLE_t handle,	/*  [ IN ]  DMA Channel handle  */
+					  dmacHw_CONTROLLER_ATTRIB_e attr	/*  [ IN ]  DMA Controler attribute of type  dmacHw_CONTROLLER_ATTRIB_e */
+    );
+
+#endif /* _DMACHW_H */
diff --git a/arch/arm/mach-bcmring/include/csp/errno.h b/arch/arm/mach-bcmring/include/csp/errno.h
new file mode 100644
index 000000000000..51357dd5b666
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/csp/errno.h
@@ -0,0 +1,32 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#ifndef CSP_ERRNO_H
+#define CSP_ERRNO_H
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#if   defined(__KERNEL__)
+#include <linux/errno.h>
+#elif defined(CSP_SIMULATION)
+#include <asm-generic/errno.h>
+#else
+#include <errno.h>
+#endif
+
+/* ---- Public Constants and Types --------------------------------------- */
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+
+#endif /* CSP_ERRNO_H */
diff --git a/arch/arm/mach-bcmring/include/csp/intcHw.h b/arch/arm/mach-bcmring/include/csp/intcHw.h
new file mode 100644
index 000000000000..1c639c8ee08f
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/csp/intcHw.h
@@ -0,0 +1,40 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+
+/****************************************************************************/
+/**
+*  @file    intcHw.h
+*
+*  @brief   generic interrupt controller API
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+
+#ifndef _INTCHW_H
+#define _INTCHW_H
+
+/* ---- Include Files ---------------------------------------------------- */
+#include <mach/csp/intcHw_reg.h>
+
+/* ---- Public Constants and Types --------------------------------------- */
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+static inline void intcHw_irq_disable(void *basep, uint32_t mask);
+static inline void intcHw_irq_enable(void *basep, uint32_t mask);
+
+#endif /* _INTCHW_H */
+
diff --git a/arch/arm/mach-bcmring/include/csp/module.h b/arch/arm/mach-bcmring/include/csp/module.h
new file mode 100644
index 000000000000..c30d2a5975a6
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/csp/module.h
@@ -0,0 +1,32 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+
+#ifndef CSP_MODULE_H
+#define CSP_MODULE_H
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#ifdef __KERNEL__
+    #include <linux/module.h>
+#else
+    #define EXPORT_SYMBOL(symbol)
+#endif
+
+/* ---- Public Constants and Types --------------------------------------- */
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+
+
+#endif /* CSP_MODULE_H */
diff --git a/arch/arm/mach-bcmring/include/csp/reg.h b/arch/arm/mach-bcmring/include/csp/reg.h
new file mode 100644
index 000000000000..e5f60bf5a1f3
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/csp/reg.h
@@ -0,0 +1,114 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*  @file    reg.h
+*
+*  @brief   Generic register defintions used in CSP
+*/
+/****************************************************************************/
+
+#ifndef CSP_REG_H
+#define CSP_REG_H
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#include <csp/stdint.h>
+
+/* ---- Public Constants and Types --------------------------------------- */
+
+#define __REG32(x)      (*((volatile uint32_t *)(x)))
+#define __REG16(x)      (*((volatile uint16_t *)(x)))
+#define __REG8(x)       (*((volatile uint8_t *) (x)))
+
+/* Macros used to define a sequence of reserved registers. The start / end */
+/* are byte offsets in the particular register definition, with the "end" */
+/* being the offset of the next un-reserved register. E.g. if offsets */
+/* 0x10 through to 0x1f are reserved, then this reserved area could be */
+/* specified as follows. */
+/*  typedef struct */
+/*  { */
+/*      uint32_t reg1;           offset 0x00 */
+/*      uint32_t reg2;           offset 0x04 */
+/*      uint32_t reg3;           offset 0x08 */
+/*      uint32_t reg4;           offset 0x0c */
+/*      REG32_RSVD(0x10, 0x20); */
+/*      uint32_t reg5;           offset 0x20 */
+/*      ... */
+/*  } EXAMPLE_REG_t; */
+#define REG8_RSVD(start, end)   uint8_t rsvd_##start[(end - start) / sizeof(uint8_t)]
+#define REG16_RSVD(start, end)  uint16_t rsvd_##start[(end - start) / sizeof(uint16_t)]
+#define REG32_RSVD(start, end)  uint32_t rsvd_##start[(end - start) / sizeof(uint32_t)]
+
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+
+/* Note: When protecting multiple statements, the REG_LOCAL_IRQ_SAVE and */
+/* REG_LOCAL_IRQ_RESTORE must be enclosed in { } to allow the  */
+/* flags variable to be declared locally. */
+/* e.g. */
+/*    statement1; */
+/*    { */
+/*       REG_LOCAL_IRQ_SAVE; */
+/*       <multiple statements here> */
+/*       REG_LOCAL_IRQ_RESTORE; */
+/*    } */
+/*    statement2; */
+/*  */
+
+#if defined(__KERNEL__) && !defined(STANDALONE)
+#include <mach/hardware.h>
+#include <linux/interrupt.h>
+
+#define REG_LOCAL_IRQ_SAVE      HW_DECLARE_SPINLOCK(reg32) \
+	unsigned long flags; HW_IRQ_SAVE(reg32, flags)
+
+#define REG_LOCAL_IRQ_RESTORE   HW_IRQ_RESTORE(reg32, flags)
+
+#else
+
+#define REG_LOCAL_IRQ_SAVE
+#define REG_LOCAL_IRQ_RESTORE
+
+#endif
+
+static inline void reg32_modify_and(volatile uint32_t *reg, uint32_t value)
+{
+	REG_LOCAL_IRQ_SAVE;
+	*reg &= value;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+static inline void reg32_modify_or(volatile uint32_t *reg, uint32_t value)
+{
+	REG_LOCAL_IRQ_SAVE;
+	*reg |= value;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+static inline void reg32_modify_mask(volatile uint32_t *reg, uint32_t mask,
+				     uint32_t value)
+{
+	REG_LOCAL_IRQ_SAVE;
+	*reg = (*reg & mask) | value;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+static inline void reg32_write(volatile uint32_t *reg, uint32_t value)
+{
+	*reg = value;
+}
+
+#endif /* CSP_REG_H */
diff --git a/arch/arm/mach-bcmring/include/csp/secHw.h b/arch/arm/mach-bcmring/include/csp/secHw.h
new file mode 100644
index 000000000000..b9d7e0732dfc
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/csp/secHw.h
@@ -0,0 +1,65 @@
+/*****************************************************************************
+* Copyright 2004 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*  @file    secHw.h
+*
+*  @brief   Definitions for accessing low level security features
+*
+*/
+/****************************************************************************/
+#ifndef SECHW_H
+#define SECHW_H
+
+typedef void (*secHw_FUNC_t) (void);
+
+typedef enum {
+	secHw_MODE_SECURE = 0x0,	/* Switches processor into secure mode */
+	secHw_MODE_NONSECURE = 0x1	/* Switches processor into non-secure mode */
+} secHw_MODE;
+
+/****************************************************************************/
+/**
+*  @brief   Requesting to execute the function in secure mode
+*
+*  This function requests the given function to run in secure mode
+*
+*/
+/****************************************************************************/
+void secHw_RunSecure(secHw_FUNC_t	/* Function to run in secure mode */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Sets the  mode
+*
+*  his function sets the processor mode (secure/non-secure)
+*
+*/
+/****************************************************************************/
+void secHw_SetMode(secHw_MODE	/* Processor mode */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Get the current mode
+*
+*  This function retieves the processor mode (secure/non-secure)
+*
+*/
+/****************************************************************************/
+void secHw_GetMode(secHw_MODE *);
+
+#endif /* SECHW_H */
diff --git a/arch/arm/mach-bcmring/include/csp/stdint.h b/arch/arm/mach-bcmring/include/csp/stdint.h
new file mode 100644
index 000000000000..3a8718bbf700
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/csp/stdint.h
@@ -0,0 +1,30 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#ifndef CSP_STDINT_H
+#define CSP_STDINT_H
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#ifdef __KERNEL__
+#include <linux/types.h>
+#else
+#include <stdint.h>
+#endif
+
+/* ---- Public Constants and Types --------------------------------------- */
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+
+#endif /* CSP_STDINT_H */
diff --git a/arch/arm/mach-bcmring/include/csp/string.h b/arch/arm/mach-bcmring/include/csp/string.h
new file mode 100644
index 000000000000..ad9e4005f141
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/csp/string.h
@@ -0,0 +1,34 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+
+
+#ifndef CSP_STRING_H
+#define CSP_STRING_H
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#ifdef __KERNEL__
+   #include <linux/string.h>
+#else
+   #include <string.h>
+#endif
+
+/* ---- Public Constants and Types --------------------------------------- */
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+
+
+#endif /* CSP_STRING_H */
+
diff --git a/arch/arm/mach-bcmring/include/csp/tmrHw.h b/arch/arm/mach-bcmring/include/csp/tmrHw.h
new file mode 100644
index 000000000000..f1236d00cb97
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/csp/tmrHw.h
@@ -0,0 +1,263 @@
+/*****************************************************************************
+* Copyright 2004 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*  @file    tmrHw.h
+*
+*  @brief   API definitions for low level Timer driver
+*
+*/
+/****************************************************************************/
+#ifndef _TMRHW_H
+#define _TMRHW_H
+
+#include <csp/stdint.h>
+
+typedef uint32_t tmrHw_ID_t;	/* Timer ID */
+typedef uint32_t tmrHw_COUNT_t;	/* Timer count */
+typedef uint32_t tmrHw_INTERVAL_t;	/* Timer interval */
+typedef uint32_t tmrHw_RATE_t;	/* Timer event (count/interrupt) rate */
+
+typedef enum {
+	tmrHw_INTERRUPT_STATUS_SET,	/* Interrupted  */
+	tmrHw_INTERRUPT_STATUS_UNSET	/* No Interrupt */
+} tmrHw_INTERRUPT_STATUS_e;
+
+typedef enum {
+	tmrHw_CAPABILITY_CLOCK,	/* Clock speed in HHz */
+	tmrHw_CAPABILITY_RESOLUTION	/* Timer resolution in bits */
+} tmrHw_CAPABILITY_e;
+
+/****************************************************************************/
+/**
+*  @brief   Get timer capability
+*
+*  This function returns various capabilities/attributes of a timer
+*
+*  @return  Numeric capability
+*
+*/
+/****************************************************************************/
+uint32_t tmrHw_getTimerCapability(tmrHw_ID_t timerId,	/*  [ IN ] Timer Id */
+				  tmrHw_CAPABILITY_e capability	/*  [ IN ] Timer capability */
+);
+
+/****************************************************************************/
+/**
+*  @brief   Configures a periodic timer in terms of timer interrupt rate
+*
+*  This function initializes a periodic timer to generate specific number of
+*  timer interrupt per second
+*
+*  @return   On success: Effective timer frequency
+*            On failure: 0
+*
+*/
+/****************************************************************************/
+tmrHw_RATE_t tmrHw_setPeriodicTimerRate(tmrHw_ID_t timerId,	/*  [ IN ] Timer Id */
+					tmrHw_RATE_t rate	/*  [ IN ] Number of timer interrupt per second */
+);
+
+/****************************************************************************/
+/**
+*  @brief   Configures a periodic timer to generate timer interrupt after
+*           certain time interval
+*
+*  This function initializes a periodic timer to generate timer interrupt
+*  after every time interval in milisecond
+*
+*  @return   On success: Effective interval set in mili-second
+*            On failure: 0
+*
+*/
+/****************************************************************************/
+tmrHw_INTERVAL_t tmrHw_setPeriodicTimerInterval(tmrHw_ID_t timerId,	/*  [ IN ] Timer Id */
+						tmrHw_INTERVAL_t msec	/*  [ IN ] Interval in mili-second */
+);
+
+/****************************************************************************/
+/**
+*  @brief   Configures a periodic timer to generate timer interrupt just once
+*           after certain time interval
+*
+*  This function initializes a periodic timer to generate a single ticks after
+*  certain time interval in milisecond
+*
+*  @return   On success: Effective interval set in mili-second
+*            On failure: 0
+*
+*/
+/****************************************************************************/
+tmrHw_INTERVAL_t tmrHw_setOneshotTimerInterval(tmrHw_ID_t timerId,	/*  [ IN ] Timer Id */
+					       tmrHw_INTERVAL_t msec	/*  [ IN ] Interval in mili-second */
+);
+
+/****************************************************************************/
+/**
+*  @brief   Configures a timer to run as a free running timer
+*
+*  This function initializes a timer to run as a free running timer
+*
+*  @return   Timer resolution (count / sec)
+*
+*/
+/****************************************************************************/
+tmrHw_RATE_t tmrHw_setFreeRunningTimer(tmrHw_ID_t timerId,	/*  [ IN ] Timer Id */
+				       uint32_t divider	/*  [ IN ] Dividing the clock frequency */
+) __attribute__ ((section(".aramtext")));
+
+/****************************************************************************/
+/**
+*  @brief   Starts a timer
+*
+*  This function starts a preconfigured timer
+*
+*  @return  -1     - On Failure
+*            0     - On Success
+*/
+/****************************************************************************/
+int tmrHw_startTimer(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
+) __attribute__ ((section(".aramtext")));
+
+/****************************************************************************/
+/**
+*  @brief   Stops a timer
+*
+*  This function stops a running timer
+*
+*  @return  -1     - On Failure
+*            0     - On Success
+*/
+/****************************************************************************/
+int tmrHw_stopTimer(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
+);
+
+/****************************************************************************/
+/**
+*  @brief   Gets current timer count
+*
+*  This function returns the current timer value
+*
+*  @return  Current downcounting timer value
+*
+*/
+/****************************************************************************/
+tmrHw_COUNT_t tmrHw_GetCurrentCount(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
+) __attribute__ ((section(".aramtext")));
+
+/****************************************************************************/
+/**
+*  @brief   Gets timer count rate
+*
+*  This function returns the number of counts per second
+*
+*  @return  Count rate
+*
+*/
+/****************************************************************************/
+tmrHw_RATE_t tmrHw_getCountRate(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
+) __attribute__ ((section(".aramtext")));
+
+/****************************************************************************/
+/**
+*  @brief   Enables timer interrupt
+*
+*  This function enables the timer interrupt
+*
+*  @return   N/A
+*
+*/
+/****************************************************************************/
+void tmrHw_enableInterrupt(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
+);
+
+/****************************************************************************/
+/**
+*  @brief   Disables timer interrupt
+*
+*  This function disable the timer interrupt
+*
+*  @return   N/A
+*/
+/****************************************************************************/
+void tmrHw_disableInterrupt(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
+);
+
+/****************************************************************************/
+/**
+*  @brief   Clears the interrupt
+*
+*  This function clears the timer interrupt
+*
+*  @return   N/A
+*
+*  @note
+*     Must be called under the context of ISR
+*/
+/****************************************************************************/
+void tmrHw_clearInterrupt(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
+);
+
+/****************************************************************************/
+/**
+*  @brief   Gets the interrupt status
+*
+*  This function returns timer interrupt status
+*
+*  @return   Interrupt status
+*/
+/****************************************************************************/
+tmrHw_INTERRUPT_STATUS_e tmrHw_getInterruptStatus(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
+);
+
+/****************************************************************************/
+/**
+*  @brief   Indentifies a timer causing interrupt
+*
+*  This functions returns a timer causing interrupt
+*
+*  @return  0xFFFFFFFF   : No timer causing an interrupt
+*           ! 0xFFFFFFFF : timer causing an interrupt
+*  @note
+*     tmrHw_clearIntrrupt() must be called with a valid timer id after calling this function
+*/
+/****************************************************************************/
+tmrHw_ID_t tmrHw_getInterruptSource(void);
+
+/****************************************************************************/
+/**
+*  @brief   Displays specific timer registers
+*
+*
+*  @return  void
+*
+*/
+/****************************************************************************/
+void tmrHw_printDebugInfo(tmrHw_ID_t timerId,	/*  [ IN ] Timer id */
+			  int (*fpPrint) (const char *, ...)	/*  [ IN ] Print callback function */
+);
+
+/****************************************************************************/
+/**
+*  @brief   Use a timer to perform a busy wait delay for a number of usecs.
+*
+*  @return   N/A
+*/
+/****************************************************************************/
+void tmrHw_udelay(tmrHw_ID_t timerId,	/*  [ IN ] Timer id */
+		  unsigned long usecs	/*  [ IN ] usec to delay */
+) __attribute__ ((section(".aramtext")));
+
+#endif /* _TMRHW_H */
diff --git a/arch/arm/mach-bcmring/include/mach/clkdev.h b/arch/arm/mach-bcmring/include/mach/clkdev.h
new file mode 100644
index 000000000000..04b37a89801c
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/clkdev.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_MACH_CLKDEV_H
+#define __ASM_MACH_CLKDEV_H
+
+#define __clk_get(clk) ({ 1; })
+#define __clk_put(clk) do { } while (0)
+
+#endif
diff --git a/arch/arm/mach-bcmring/include/mach/csp/cap.h b/arch/arm/mach-bcmring/include/mach/csp/cap.h
new file mode 100644
index 000000000000..30fa2d540630
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/cap.h
@@ -0,0 +1,63 @@
+/*****************************************************************************
+* Copyright 2009 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#ifndef CAP_H
+#define CAP_H
+
+/* ---- Include Files ---------------------------------------------------- */
+/* ---- Public Constants and Types --------------------------------------- */
+typedef enum {
+	CAP_NOT_PRESENT = 0,
+	CAP_PRESENT
+} CAP_RC_T;
+
+typedef enum {
+	CAP_VPM,
+	CAP_ETH_PHY,
+	CAP_ETH_GMII,
+	CAP_ETH_SGMII,
+	CAP_USB,
+	CAP_TSC,
+	CAP_EHSS,
+	CAP_SDIO,
+	CAP_UARTB,
+	CAP_KEYPAD,
+	CAP_CLCD,
+	CAP_GE,
+	CAP_LEDM,
+	CAP_BBL,
+	CAP_VDEC,
+	CAP_PIF,
+	CAP_APM,
+	CAP_SPU,
+	CAP_PKA,
+	CAP_RNG,
+} CAP_CAPABILITY_T;
+
+typedef enum {
+	CAP_LCD_WVGA = 0,
+	CAP_LCD_VGA = 0x1,
+	CAP_LCD_WQVGA = 0x2,
+	CAP_LCD_QVGA = 0x3
+} CAP_LCD_RES_T;
+
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+
+static inline CAP_RC_T cap_isPresent(CAP_CAPABILITY_T capability, int index);
+static inline uint32_t cap_getMaxArmSpeedHz(void);
+static inline uint32_t cap_getMaxVpmSpeedHz(void);
+static inline CAP_LCD_RES_T cap_getMaxLcdRes(void);
+
+#endif
diff --git a/arch/arm/mach-bcmring/include/mach/csp/cap_inline.h b/arch/arm/mach-bcmring/include/mach/csp/cap_inline.h
new file mode 100644
index 000000000000..933ce68ed90b
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/cap_inline.h
@@ -0,0 +1,409 @@
+/*****************************************************************************
+* Copyright 2009 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#ifndef CAP_INLINE_H
+#define CAP_INLINE_H
+
+/* ---- Include Files ---------------------------------------------------- */
+#include <mach/csp/cap.h>
+#include <cfg_global.h>
+
+/* ---- Public Constants and Types --------------------------------------- */
+#define CAP_CONFIG0_VPM_DIS          0x00000001
+#define CAP_CONFIG0_ETH_PHY0_DIS     0x00000002
+#define CAP_CONFIG0_ETH_PHY1_DIS     0x00000004
+#define CAP_CONFIG0_ETH_GMII0_DIS    0x00000008
+#define CAP_CONFIG0_ETH_GMII1_DIS    0x00000010
+#define CAP_CONFIG0_ETH_SGMII0_DIS   0x00000020
+#define CAP_CONFIG0_ETH_SGMII1_DIS   0x00000040
+#define CAP_CONFIG0_USB0_DIS         0x00000080
+#define CAP_CONFIG0_USB1_DIS         0x00000100
+#define CAP_CONFIG0_TSC_DIS          0x00000200
+#define CAP_CONFIG0_EHSS0_DIS        0x00000400
+#define CAP_CONFIG0_EHSS1_DIS        0x00000800
+#define CAP_CONFIG0_SDIO0_DIS        0x00001000
+#define CAP_CONFIG0_SDIO1_DIS        0x00002000
+#define CAP_CONFIG0_UARTB_DIS        0x00004000
+#define CAP_CONFIG0_KEYPAD_DIS       0x00008000
+#define CAP_CONFIG0_CLCD_DIS         0x00010000
+#define CAP_CONFIG0_GE_DIS           0x00020000
+#define CAP_CONFIG0_LEDM_DIS         0x00040000
+#define CAP_CONFIG0_BBL_DIS          0x00080000
+#define CAP_CONFIG0_VDEC_DIS         0x00100000
+#define CAP_CONFIG0_PIF_DIS          0x00200000
+#define CAP_CONFIG0_RESERVED1_DIS    0x00400000
+#define CAP_CONFIG0_RESERVED2_DIS    0x00800000
+
+#define CAP_CONFIG1_APMA_DIS         0x00000001
+#define CAP_CONFIG1_APMB_DIS         0x00000002
+#define CAP_CONFIG1_APMC_DIS         0x00000004
+#define CAP_CONFIG1_CLCD_RES_MASK    0x00000600
+#define CAP_CONFIG1_CLCD_RES_SHIFT   9
+#define CAP_CONFIG1_CLCD_RES_WVGA    (CAP_LCD_WVGA << CAP_CONFIG1_CLCD_RES_SHIFT)
+#define CAP_CONFIG1_CLCD_RES_VGA     (CAP_LCD_VGA << CAP_CONFIG1_CLCD_RES_SHIFT)
+#define CAP_CONFIG1_CLCD_RES_WQVGA   (CAP_LCD_WQVGA << CAP_CONFIG1_CLCD_RES_SHIFT)
+#define CAP_CONFIG1_CLCD_RES_QVGA    (CAP_LCD_QVGA << CAP_CONFIG1_CLCD_RES_SHIFT)
+
+#define CAP_CONFIG2_SPU_DIS          0x00000010
+#define CAP_CONFIG2_PKA_DIS          0x00000020
+#define CAP_CONFIG2_RNG_DIS          0x00000080
+
+#if   (CFG_GLOBAL_CHIP == BCM11107)
+#define capConfig0 0
+#define capConfig1 CAP_CONFIG1_CLCD_RES_WVGA
+#define capConfig2 0
+#define CAP_APM_MAX_NUM_CHANS 3
+#elif (CFG_GLOBAL_CHIP == FPGA11107)
+#define capConfig0 0
+#define capConfig1 CAP_CONFIG1_CLCD_RES_WVGA
+#define capConfig2 0
+#define CAP_APM_MAX_NUM_CHANS 3
+#elif (CFG_GLOBAL_CHIP == BCM11109)
+#define capConfig0 (CAP_CONFIG0_USB1_DIS | CAP_CONFIG0_EHSS1_DIS | CAP_CONFIG0_SDIO1_DIS | CAP_CONFIG0_GE_DIS | CAP_CONFIG0_BBL_DIS | CAP_CONFIG0_VDEC_DIS)
+#define capConfig1 (CAP_CONFIG1_APMC_DIS | CAP_CONFIG1_CLCD_RES_WQVGA)
+#define capConfig2 (CAP_CONFIG2_SPU_DIS | CAP_CONFIG2_PKA_DIS)
+#define CAP_APM_MAX_NUM_CHANS 2
+#elif (CFG_GLOBAL_CHIP == BCM11170)
+#define capConfig0 (CAP_CONFIG0_ETH_GMII0_DIS | CAP_CONFIG0_ETH_GMII1_DIS | CAP_CONFIG0_USB0_DIS | CAP_CONFIG0_USB1_DIS | CAP_CONFIG0_TSC_DIS | CAP_CONFIG0_EHSS1_DIS | CAP_CONFIG0_SDIO0_DIS | CAP_CONFIG0_SDIO1_DIS | CAP_CONFIG0_UARTB_DIS | CAP_CONFIG0_CLCD_DIS | CAP_CONFIG0_GE_DIS | CAP_CONFIG0_BBL_DIS | CAP_CONFIG0_VDEC_DIS)
+#define capConfig1 (CAP_CONFIG1_APMC_DIS | CAP_CONFIG1_CLCD_RES_WQVGA)
+#define capConfig2 (CAP_CONFIG2_SPU_DIS | CAP_CONFIG2_PKA_DIS)
+#define CAP_APM_MAX_NUM_CHANS 2
+#elif (CFG_GLOBAL_CHIP == BCM11110)
+#define capConfig0 (CAP_CONFIG0_USB1_DIS | CAP_CONFIG0_TSC_DIS | CAP_CONFIG0_EHSS1_DIS | CAP_CONFIG0_SDIO0_DIS | CAP_CONFIG0_SDIO1_DIS | CAP_CONFIG0_UARTB_DIS | CAP_CONFIG0_GE_DIS | CAP_CONFIG0_BBL_DIS | CAP_CONFIG0_VDEC_DIS)
+#define capConfig1 CAP_CONFIG1_APMC_DIS
+#define capConfig2 (CAP_CONFIG2_SPU_DIS | CAP_CONFIG2_PKA_DIS)
+#define CAP_APM_MAX_NUM_CHANS 2
+#elif (CFG_GLOBAL_CHIP == BCM11211)
+#define capConfig0 (CAP_CONFIG0_ETH_PHY0_DIS | CAP_CONFIG0_ETH_GMII0_DIS | CAP_CONFIG0_ETH_GMII1_DIS | CAP_CONFIG0_ETH_SGMII0_DIS | CAP_CONFIG0_ETH_SGMII1_DIS | CAP_CONFIG0_CLCD_DIS)
+#define capConfig1 CAP_CONFIG1_APMC_DIS
+#define capConfig2 0
+#define CAP_APM_MAX_NUM_CHANS 2
+#else
+#error CFG_GLOBAL_CHIP type capabilities not defined
+#endif
+
+#if   ((CFG_GLOBAL_CHIP == BCM11107) || (CFG_GLOBAL_CHIP == FPGA11107))
+#define CAP_HW_CFG_ARM_CLK_HZ 500000000
+#elif ((CFG_GLOBAL_CHIP == BCM11109) || (CFG_GLOBAL_CHIP == BCM11170) || (CFG_GLOBAL_CHIP == BCM11110))
+#define CAP_HW_CFG_ARM_CLK_HZ 300000000
+#elif (CFG_GLOBAL_CHIP == BCM11211)
+#define CAP_HW_CFG_ARM_CLK_HZ 666666666
+#else
+#error CFG_GLOBAL_CHIP type capabilities not defined
+#endif
+
+#if ((CFG_GLOBAL_CHIP == BCM11107) || (CFG_GLOBAL_CHIP == BCM11211) || (CFG_GLOBAL_CHIP == FPGA11107))
+#define CAP_HW_CFG_VPM_CLK_HZ 333333333
+#elif ((CFG_GLOBAL_CHIP == BCM11109) || (CFG_GLOBAL_CHIP == BCM11170) || (CFG_GLOBAL_CHIP == BCM11110))
+#define CAP_HW_CFG_VPM_CLK_HZ 200000000
+#else
+#error CFG_GLOBAL_CHIP type capabilities not defined
+#endif
+
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+
+/****************************************************************************
+*  cap_isPresent -
+*
+*  PURPOSE:
+*     Determines if the chip has a certain capability present
+*
+*  PARAMETERS:
+*     capability - type of capability to determine if present
+*
+*  RETURNS:
+*     CAP_PRESENT or CAP_NOT_PRESENT
+****************************************************************************/
+static inline CAP_RC_T cap_isPresent(CAP_CAPABILITY_T capability, int index)
+{
+	CAP_RC_T returnVal = CAP_NOT_PRESENT;
+
+	switch (capability) {
+	case CAP_VPM:
+		{
+			if (!(capConfig0 & CAP_CONFIG0_VPM_DIS)) {
+				returnVal = CAP_PRESENT;
+			}
+		}
+		break;
+
+	case CAP_ETH_PHY:
+		{
+			if ((index == 0)
+			    && (!(capConfig0 & CAP_CONFIG0_ETH_PHY0_DIS))) {
+				returnVal = CAP_PRESENT;
+			}
+			if ((index == 1)
+			    && (!(capConfig0 & CAP_CONFIG0_ETH_PHY1_DIS))) {
+				returnVal = CAP_PRESENT;
+			}
+		}
+		break;
+
+	case CAP_ETH_GMII:
+		{
+			if ((index == 0)
+			    && (!(capConfig0 & CAP_CONFIG0_ETH_GMII0_DIS))) {
+				returnVal = CAP_PRESENT;
+			}
+			if ((index == 1)
+			    && (!(capConfig0 & CAP_CONFIG0_ETH_GMII1_DIS))) {
+				returnVal = CAP_PRESENT;
+			}
+		}
+		break;
+
+	case CAP_ETH_SGMII:
+		{
+			if ((index == 0)
+			    && (!(capConfig0 & CAP_CONFIG0_ETH_SGMII0_DIS))) {
+				returnVal = CAP_PRESENT;
+			}
+			if ((index == 1)
+			    && (!(capConfig0 & CAP_CONFIG0_ETH_SGMII1_DIS))) {
+				returnVal = CAP_PRESENT;
+			}
+		}
+		break;
+
+	case CAP_USB:
+		{
+			if ((index == 0)
+			    && (!(capConfig0 & CAP_CONFIG0_USB0_DIS))) {
+				returnVal = CAP_PRESENT;
+			}
+			if ((index == 1)
+			    && (!(capConfig0 & CAP_CONFIG0_USB1_DIS))) {
+				returnVal = CAP_PRESENT;
+			}
+		}
+		break;
+
+	case CAP_TSC:
+		{
+			if (!(capConfig0 & CAP_CONFIG0_TSC_DIS)) {
+				returnVal = CAP_PRESENT;
+			}
+		}
+		break;
+
+	case CAP_EHSS:
+		{
+			if ((index == 0)
+			    && (!(capConfig0 & CAP_CONFIG0_EHSS0_DIS))) {
+				returnVal = CAP_PRESENT;
+			}
+			if ((index == 1)
+			    && (!(capConfig0 & CAP_CONFIG0_EHSS1_DIS))) {
+				returnVal = CAP_PRESENT;
+			}
+		}
+		break;
+
+	case CAP_SDIO:
+		{
+			if ((index == 0)
+			    && (!(capConfig0 & CAP_CONFIG0_SDIO0_DIS))) {
+				returnVal = CAP_PRESENT;
+			}
+			if ((index == 1)
+			    && (!(capConfig0 & CAP_CONFIG0_SDIO1_DIS))) {
+				returnVal = CAP_PRESENT;
+			}
+		}
+		break;
+
+	case CAP_UARTB:
+		{
+			if (!(capConfig0 & CAP_CONFIG0_UARTB_DIS)) {
+				returnVal = CAP_PRESENT;
+			}
+		}
+		break;
+
+	case CAP_KEYPAD:
+		{
+			if (!(capConfig0 & CAP_CONFIG0_KEYPAD_DIS)) {
+				returnVal = CAP_PRESENT;
+			}
+		}
+		break;
+
+	case CAP_CLCD:
+		{
+			if (!(capConfig0 & CAP_CONFIG0_CLCD_DIS)) {
+				returnVal = CAP_PRESENT;
+			}
+		}
+		break;
+
+	case CAP_GE:
+		{
+			if (!(capConfig0 & CAP_CONFIG0_GE_DIS)) {
+				returnVal = CAP_PRESENT;
+			}
+		}
+		break;
+
+	case CAP_LEDM:
+		{
+			if (!(capConfig0 & CAP_CONFIG0_LEDM_DIS)) {
+				returnVal = CAP_PRESENT;
+			}
+		}
+		break;
+
+	case CAP_BBL:
+		{
+			if (!(capConfig0 & CAP_CONFIG0_BBL_DIS)) {
+				returnVal = CAP_PRESENT;
+			}
+		}
+		break;
+
+	case CAP_VDEC:
+		{
+			if (!(capConfig0 & CAP_CONFIG0_VDEC_DIS)) {
+				returnVal = CAP_PRESENT;
+			}
+		}
+		break;
+
+	case CAP_PIF:
+		{
+			if (!(capConfig0 & CAP_CONFIG0_PIF_DIS)) {
+				returnVal = CAP_PRESENT;
+			}
+		}
+		break;
+
+	case CAP_APM:
+		{
+			if ((index == 0)
+			    && (!(capConfig1 & CAP_CONFIG1_APMA_DIS))) {
+				returnVal = CAP_PRESENT;
+			}
+			if ((index == 1)
+			    && (!(capConfig1 & CAP_CONFIG1_APMB_DIS))) {
+				returnVal = CAP_PRESENT;
+			}
+			if ((index == 2)
+			    && (!(capConfig1 & CAP_CONFIG1_APMC_DIS))) {
+				returnVal = CAP_PRESENT;
+			}
+		}
+		break;
+
+	case CAP_SPU:
+		{
+			if (!(capConfig2 & CAP_CONFIG2_SPU_DIS)) {
+				returnVal = CAP_PRESENT;
+			}
+		}
+		break;
+
+	case CAP_PKA:
+		{
+			if (!(capConfig2 & CAP_CONFIG2_PKA_DIS)) {
+				returnVal = CAP_PRESENT;
+			}
+		}
+		break;
+
+	case CAP_RNG:
+		{
+			if (!(capConfig2 & CAP_CONFIG2_RNG_DIS)) {
+				returnVal = CAP_PRESENT;
+			}
+		}
+		break;
+
+	default:
+		{
+		}
+		break;
+	}
+	return returnVal;
+}
+
+/****************************************************************************
+*  cap_getMaxArmSpeedHz -
+*
+*  PURPOSE:
+*     Determines the maximum speed of the ARM CPU
+*
+*  PARAMETERS:
+*     none
+*
+*  RETURNS:
+*     clock speed in Hz that the ARM processor is able to run at
+****************************************************************************/
+static inline uint32_t cap_getMaxArmSpeedHz(void)
+{
+#if   ((CFG_GLOBAL_CHIP == BCM11107) || (CFG_GLOBAL_CHIP == FPGA11107))
+	return 500000000;
+#elif ((CFG_GLOBAL_CHIP == BCM11109) || (CFG_GLOBAL_CHIP == BCM11170) || (CFG_GLOBAL_CHIP == BCM11110))
+	return 300000000;
+#elif (CFG_GLOBAL_CHIP == BCM11211)
+	return 666666666;
+#else
+#error CFG_GLOBAL_CHIP type capabilities not defined
+#endif
+}
+
+/****************************************************************************
+*  cap_getMaxVpmSpeedHz -
+*
+*  PURPOSE:
+*     Determines the maximum speed of the VPM
+*
+*  PARAMETERS:
+*     none
+*
+*  RETURNS:
+*     clock speed in Hz that the VPM is able to run at
+****************************************************************************/
+static inline uint32_t cap_getMaxVpmSpeedHz(void)
+{
+#if ((CFG_GLOBAL_CHIP == BCM11107) || (CFG_GLOBAL_CHIP == BCM11211) || (CFG_GLOBAL_CHIP == FPGA11107))
+	return 333333333;
+#elif ((CFG_GLOBAL_CHIP == BCM11109) || (CFG_GLOBAL_CHIP == BCM11170) || (CFG_GLOBAL_CHIP == BCM11110))
+	return 200000000;
+#else
+#error CFG_GLOBAL_CHIP type capabilities not defined
+#endif
+}
+
+/****************************************************************************
+*  cap_getMaxLcdRes -
+*
+*  PURPOSE:
+*     Determines the maximum LCD resolution capabilities
+*
+*  PARAMETERS:
+*     none
+*
+*  RETURNS:
+*   CAP_LCD_WVGA, CAP_LCD_VGA, CAP_LCD_WQVGA or CAP_LCD_QVGA
+*
+****************************************************************************/
+static inline CAP_LCD_RES_T cap_getMaxLcdRes(void)
+{
+	return (CAP_LCD_RES_T)
+		((capConfig1 & CAP_CONFIG1_CLCD_RES_MASK) >>
+		 CAP_CONFIG1_CLCD_RES_SHIFT);
+}
+
+#endif
diff --git a/arch/arm/mach-bcmring/include/mach/csp/chipcHw_def.h b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_def.h
new file mode 100644
index 000000000000..70eaea866cfe
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_def.h
@@ -0,0 +1,1123 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#ifndef CHIPC_DEF_H
+#define CHIPC_DEF_H
+
+/* ---- Include Files ----------------------------------------------------- */
+
+#include <csp/stdint.h>
+#include <csp/errno.h>
+#include <csp/reg.h>
+#include <mach/csp/chipcHw_reg.h>
+
+/* ---- Public Constants and Types ---------------------------------------- */
+
+/* Set 1 to configure DDR/VPM phase alignment by HW */
+#define chipcHw_DDR_HW_PHASE_ALIGN    0
+#define chipcHw_VPM_HW_PHASE_ALIGN    0
+
+typedef uint32_t chipcHw_freq;
+
+/* Configurable miscellaneous clocks */
+typedef enum {
+	chipcHw_CLOCK_DDR,	/* DDR PHY Clock */
+	chipcHw_CLOCK_ARM,	/* ARM Clock */
+	chipcHw_CLOCK_ESW,	/* Ethernet Switch Clock */
+	chipcHw_CLOCK_VPM,	/* VPM Clock */
+	chipcHw_CLOCK_ESW125,	/* Ethernet MII Clock */
+	chipcHw_CLOCK_UART,	/* UART Clock */
+	chipcHw_CLOCK_SDIO0,	/* SDIO 0 Clock */
+	chipcHw_CLOCK_SDIO1,	/* SDIO 1 Clock */
+	chipcHw_CLOCK_SPI,	/* SPI Clock */
+	chipcHw_CLOCK_ETM,	/* ARM ETM Clock */
+
+	chipcHw_CLOCK_BUS,	/* BUS Clock */
+	chipcHw_CLOCK_OTP,	/* OTP Clock */
+	chipcHw_CLOCK_I2C,	/* I2C Host Clock */
+	chipcHw_CLOCK_I2S0,	/* I2S 0 Host Clock */
+	chipcHw_CLOCK_RTBUS,	/* DDR PHY Configuration Clock */
+	chipcHw_CLOCK_APM100,	/* APM100 Clock */
+	chipcHw_CLOCK_TSC,	/* Touch screen Clock */
+	chipcHw_CLOCK_LED,	/* LED Clock */
+
+	chipcHw_CLOCK_USB,	/* USB Clock */
+	chipcHw_CLOCK_LCD,	/* LCD CLock */
+	chipcHw_CLOCK_APM,	/* APM Clock */
+
+	chipcHw_CLOCK_I2S1,	/* I2S 1 Host Clock */
+} chipcHw_CLOCK_e;
+
+/* System booting strap options */
+typedef enum {
+	chipcHw_BOOT_DEVICE_UART = chipcHw_STRAPS_BOOT_DEVICE_UART,
+	chipcHw_BOOT_DEVICE_SERIAL_FLASH =
+	    chipcHw_STRAPS_BOOT_DEVICE_SERIAL_FLASH,
+	chipcHw_BOOT_DEVICE_NOR_FLASH_16 =
+	    chipcHw_STRAPS_BOOT_DEVICE_NOR_FLASH_16,
+	chipcHw_BOOT_DEVICE_NAND_FLASH_8 =
+	    chipcHw_STRAPS_BOOT_DEVICE_NAND_FLASH_8,
+	chipcHw_BOOT_DEVICE_NAND_FLASH_16 =
+	    chipcHw_STRAPS_BOOT_DEVICE_NAND_FLASH_16
+} chipcHw_BOOT_DEVICE_e;
+
+/* System booting modes */
+typedef enum {
+	chipcHw_BOOT_MODE_NORMAL = chipcHw_STRAPS_BOOT_MODE_NORMAL,
+	chipcHw_BOOT_MODE_DBG_SW = chipcHw_STRAPS_BOOT_MODE_DBG_SW,
+	chipcHw_BOOT_MODE_DBG_BOOT = chipcHw_STRAPS_BOOT_MODE_DBG_BOOT,
+	chipcHw_BOOT_MODE_NORMAL_QUIET = chipcHw_STRAPS_BOOT_MODE_NORMAL_QUIET
+} chipcHw_BOOT_MODE_e;
+
+/* NAND Flash page size strap options */
+typedef enum {
+	chipcHw_NAND_PAGESIZE_512 = chipcHw_STRAPS_NAND_PAGESIZE_512,
+	chipcHw_NAND_PAGESIZE_2048 = chipcHw_STRAPS_NAND_PAGESIZE_2048,
+	chipcHw_NAND_PAGESIZE_4096 = chipcHw_STRAPS_NAND_PAGESIZE_4096,
+	chipcHw_NAND_PAGESIZE_EXT = chipcHw_STRAPS_NAND_PAGESIZE_EXT
+} chipcHw_NAND_PAGESIZE_e;
+
+/* GPIO Pin function */
+typedef enum {
+	chipcHw_GPIO_FUNCTION_KEYPAD = chipcHw_REG_GPIO_MUX_KEYPAD,
+	chipcHw_GPIO_FUNCTION_I2CH = chipcHw_REG_GPIO_MUX_I2CH,
+	chipcHw_GPIO_FUNCTION_SPI = chipcHw_REG_GPIO_MUX_SPI,
+	chipcHw_GPIO_FUNCTION_UART = chipcHw_REG_GPIO_MUX_UART,
+	chipcHw_GPIO_FUNCTION_LEDMTXP = chipcHw_REG_GPIO_MUX_LEDMTXP,
+	chipcHw_GPIO_FUNCTION_LEDMTXS = chipcHw_REG_GPIO_MUX_LEDMTXS,
+	chipcHw_GPIO_FUNCTION_SDIO0 = chipcHw_REG_GPIO_MUX_SDIO0,
+	chipcHw_GPIO_FUNCTION_SDIO1 = chipcHw_REG_GPIO_MUX_SDIO1,
+	chipcHw_GPIO_FUNCTION_PCM = chipcHw_REG_GPIO_MUX_PCM,
+	chipcHw_GPIO_FUNCTION_I2S = chipcHw_REG_GPIO_MUX_I2S,
+	chipcHw_GPIO_FUNCTION_ETM = chipcHw_REG_GPIO_MUX_ETM,
+	chipcHw_GPIO_FUNCTION_DEBUG = chipcHw_REG_GPIO_MUX_DEBUG,
+	chipcHw_GPIO_FUNCTION_MISC = chipcHw_REG_GPIO_MUX_MISC,
+	chipcHw_GPIO_FUNCTION_GPIO = chipcHw_REG_GPIO_MUX_GPIO
+} chipcHw_GPIO_FUNCTION_e;
+
+/* PIN Output slew rate */
+typedef enum {
+	chipcHw_PIN_SLEW_RATE_HIGH = chipcHw_REG_SLEW_RATE_HIGH,
+	chipcHw_PIN_SLEW_RATE_NORMAL = chipcHw_REG_SLEW_RATE_NORMAL
+} chipcHw_PIN_SLEW_RATE_e;
+
+/* PIN Current drive strength */
+typedef enum {
+	chipcHw_PIN_CURRENT_STRENGTH_2mA = chipcHw_REG_CURRENT_STRENGTH_2mA,
+	chipcHw_PIN_CURRENT_STRENGTH_4mA = chipcHw_REG_CURRENT_STRENGTH_4mA,
+	chipcHw_PIN_CURRENT_STRENGTH_6mA = chipcHw_REG_CURRENT_STRENGTH_6mA,
+	chipcHw_PIN_CURRENT_STRENGTH_8mA = chipcHw_REG_CURRENT_STRENGTH_8mA,
+	chipcHw_PIN_CURRENT_STRENGTH_10mA = chipcHw_REG_CURRENT_STRENGTH_10mA,
+	chipcHw_PIN_CURRENT_STRENGTH_12mA = chipcHw_REG_CURRENT_STRENGTH_12mA
+} chipcHw_PIN_CURRENT_STRENGTH_e;
+
+/* PIN Pull up register settings */
+typedef enum {
+	chipcHw_PIN_PULL_NONE = chipcHw_REG_PULL_NONE,
+	chipcHw_PIN_PULL_UP = chipcHw_REG_PULL_UP,
+	chipcHw_PIN_PULL_DOWN = chipcHw_REG_PULL_DOWN
+} chipcHw_PIN_PULL_e;
+
+/* PIN input type settings */
+typedef enum {
+	chipcHw_PIN_INPUTTYPE_CMOS = chipcHw_REG_INPUTTYPE_CMOS,
+	chipcHw_PIN_INPUTTYPE_ST = chipcHw_REG_INPUTTYPE_ST
+} chipcHw_PIN_INPUTTYPE_e;
+
+/* Allow/Disalow the support of spread spectrum  */
+typedef enum {
+	chipcHw_SPREAD_SPECTRUM_DISALLOW,	/* Spread spectrum support is not allowed */
+	chipcHw_SPREAD_SPECTRUM_ALLOW	/* Spread spectrum support is allowed */
+} chipcHw_SPREAD_SPECTRUM_e;
+
+typedef struct {
+	chipcHw_SPREAD_SPECTRUM_e ssSupport;	/* Allow/Disalow to support spread spectrum.
+						   If supported, call chipcHw_enableSpreadSpectrum ()
+						   to activate the spread spectrum with desired spread. */
+	uint32_t pllVcoFreqHz;	/* PLL VCO frequency in Hz */
+	uint32_t pll2VcoFreqHz;	/* PLL2 VCO frequency in Hz */
+	uint32_t busClockFreqHz;	/* Bus clock frequency in Hz */
+	uint32_t armBusRatio;	/* ARM clock : Bus clock */
+	uint32_t vpmBusRatio;	/* VPM clock : Bus clock */
+	uint32_t ddrBusRatio;	/* DDR clock : Bus clock */
+} chipcHw_INIT_PARAM_t;
+
+/* CHIP revision number */
+typedef enum {
+	chipcHw_REV_NUMBER_A0 = chipcHw_REG_REV_A0,
+	chipcHw_REV_NUMBER_B0 = chipcHw_REG_REV_B0
+} chipcHw_REV_NUMBER_e;
+
+typedef enum {
+	chipcHw_VPM_HW_PHASE_INTR_DISABLE = chipcHw_REG_VPM_INTR_DISABLE,
+	chipcHw_VPM_HW_PHASE_INTR_FAST = chipcHw_REG_VPM_INTR_FAST,
+	chipcHw_VPM_HW_PHASE_INTR_MEDIUM = chipcHw_REG_VPM_INTR_MEDIUM,
+	chipcHw_VPM_HW_PHASE_INTR_SLOW = chipcHw_REG_VPM_INTR_SLOW
+} chipcHw_VPM_HW_PHASE_INTR_e;
+
+typedef enum {
+	chipcHw_DDR_HW_PHASE_MARGIN_STRICT,	/*  Strict margin for DDR phase align condition */
+	chipcHw_DDR_HW_PHASE_MARGIN_MEDIUM,	/*  Medium margin for DDR phase align condition */
+	chipcHw_DDR_HW_PHASE_MARGIN_WIDE	/*  Wider margin for DDR phase align condition */
+} chipcHw_DDR_HW_PHASE_MARGIN_e;
+
+typedef enum {
+	chipcHw_VPM_HW_PHASE_MARGIN_STRICT,	/*  Strict margin for VPM phase align condition */
+	chipcHw_VPM_HW_PHASE_MARGIN_MEDIUM,	/*  Medium margin for VPM phase align condition */
+	chipcHw_VPM_HW_PHASE_MARGIN_WIDE	/*  Wider margin for VPM phase align condition */
+} chipcHw_VPM_HW_PHASE_MARGIN_e;
+
+#define chipcHw_XTAL_FREQ_Hz                    25000000	/* Reference clock frequency in Hz */
+
+/* Programable pin defines */
+#define chipcHw_PIN_GPIO(n)                     ((((n) >= 0) && ((n) < (chipcHw_GPIO_COUNT))) ? (n) : 0xFFFFFFFF)
+									     /* GPIO pin 0 - 60 */
+#define chipcHw_PIN_UARTTXD                     (chipcHw_GPIO_COUNT + 0)	/* UART Transmit */
+#define chipcHw_PIN_NVI_A                       (chipcHw_GPIO_COUNT + 1)	/* NVI Interface */
+#define chipcHw_PIN_NVI_D                       (chipcHw_GPIO_COUNT + 2)	/* NVI Interface */
+#define chipcHw_PIN_NVI_OEB                     (chipcHw_GPIO_COUNT + 3)	/* NVI Interface */
+#define chipcHw_PIN_NVI_WEB                     (chipcHw_GPIO_COUNT + 4)	/* NVI Interface */
+#define chipcHw_PIN_NVI_CS                      (chipcHw_GPIO_COUNT + 5)	/* NVI Interface */
+#define chipcHw_PIN_NVI_NAND_CSB                (chipcHw_GPIO_COUNT + 6)	/* NVI Interface */
+#define chipcHw_PIN_NVI_FLASHWP                 (chipcHw_GPIO_COUNT + 7)	/* NVI Interface */
+#define chipcHw_PIN_NVI_NAND_RDYB               (chipcHw_GPIO_COUNT + 8)	/* NVI Interface */
+#define chipcHw_PIN_CL_DATA_0_17                (chipcHw_GPIO_COUNT + 9)	/* LCD Data 0 - 17 */
+#define chipcHw_PIN_CL_DATA_18_20               (chipcHw_GPIO_COUNT + 10)	/* LCD Data 18 - 20 */
+#define chipcHw_PIN_CL_DATA_21_23               (chipcHw_GPIO_COUNT + 11)	/* LCD Data 21 - 23 */
+#define chipcHw_PIN_CL_POWER                    (chipcHw_GPIO_COUNT + 12)	/* LCD Power */
+#define chipcHw_PIN_CL_ACK                      (chipcHw_GPIO_COUNT + 13)	/* LCD Ack */
+#define chipcHw_PIN_CL_FP                       (chipcHw_GPIO_COUNT + 14)	/* LCD FP */
+#define chipcHw_PIN_CL_LP                       (chipcHw_GPIO_COUNT + 15)	/* LCD LP */
+#define chipcHw_PIN_UARTRXD                     (chipcHw_GPIO_COUNT + 16)	/* UART Receive */
+
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+
+/****************************************************************************/
+/**
+*  @brief  Initializes the clock module
+*
+*/
+/****************************************************************************/
+void chipcHw_Init(chipcHw_INIT_PARAM_t *initParam	/*  [ IN ] Misc chip initialization parameter */
+    ) __attribute__ ((section(".aramtext")));
+
+/****************************************************************************/
+/**
+*  @brief  Enables the PLL1
+*
+*  This function enables the PLL1
+*
+*/
+/****************************************************************************/
+void chipcHw_pll1Enable(uint32_t vcoFreqHz,	/*  [ IN ] VCO frequency in Hz */
+			chipcHw_SPREAD_SPECTRUM_e ssSupport	/*  [ IN ] SS status */
+    ) __attribute__ ((section(".aramtext")));
+
+/****************************************************************************/
+/**
+*  @brief  Enables the PLL2
+*
+*  This function enables the PLL2
+*
+*/
+/****************************************************************************/
+void chipcHw_pll2Enable(uint32_t vcoFreqHz	/*  [ IN ] VCO frequency in Hz */
+    ) __attribute__ ((section(".aramtext")));
+
+/****************************************************************************/
+/**
+*  @brief  Disable the PLL1
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_pll1Disable(void);
+
+/****************************************************************************/
+/**
+*  @brief  Disable the PLL2
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_pll2Disable(void);
+
+/****************************************************************************/
+/**
+*  @brief   Set clock fequency for miscellaneous configurable clocks
+*
+*  This function sets clock frequency
+*
+*  @return  Configured clock frequency in KHz
+*
+*/
+/****************************************************************************/
+chipcHw_freq chipcHw_getClockFrequency(chipcHw_CLOCK_e clock	/*  [ IN ] Configurable clock */
+    ) __attribute__ ((section(".aramtext")));
+
+/****************************************************************************/
+/**
+*  @brief   Set clock fequency for miscellaneous configurable clocks
+*
+*  This function sets clock frequency
+*
+*  @return  Configured clock frequency in Hz
+*
+*/
+/****************************************************************************/
+chipcHw_freq chipcHw_setClockFrequency(chipcHw_CLOCK_e clock,	/*  [ IN ] Configurable clock */
+				       uint32_t freq	/*  [ IN ] Clock frequency in Hz */
+    ) __attribute__ ((section(".aramtext")));
+
+/****************************************************************************/
+/**
+*  @brief   Set VPM clock in sync with BUS clock
+*
+*  This function does the phase adjustment between VPM and BUS clock
+*
+*  @return >= 0 : On success ( # of adjustment required )
+*            -1 : On failure
+*/
+/****************************************************************************/
+int chipcHw_vpmPhaseAlign(void);
+
+/****************************************************************************/
+/**
+*  @brief   Enables core a clock of a certain device
+*
+*  This function enables a core clock
+*
+*  @return  void
+*
+*  @note    Doesnot affect the bus interface clock
+*/
+/****************************************************************************/
+static inline void chipcHw_setClockEnable(chipcHw_CLOCK_e clock	/*  [ IN ] Configurable clock */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Disabled a core clock of a certain device
+*
+*  This function disables a core clock
+*
+*  @return  void
+*
+*  @note    Doesnot affect the bus interface clock
+*/
+/****************************************************************************/
+static inline void chipcHw_setClockDisable(chipcHw_CLOCK_e clock	/*  [ IN ] Configurable clock */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Enables bypass clock of a certain device
+*
+*  This function enables bypass clock
+*
+*  @note    Doesnot affect the bus interface clock
+*/
+/****************************************************************************/
+static inline void chipcHw_bypassClockEnable(chipcHw_CLOCK_e clock	/*  [ IN ] Configurable clock */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Disabled bypass clock of a certain device
+*
+*  This function disables bypass clock
+*
+*  @note    Doesnot affect the bus interface clock
+*/
+/****************************************************************************/
+static inline void chipcHw_bypassClockDisable(chipcHw_CLOCK_e clock	/*  [ IN ] Configurable clock */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Get Numeric Chip ID
+*
+*  This function returns Chip ID that includes the revison number
+*
+*  @return  Complete numeric Chip ID
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getChipId(void);
+
+/****************************************************************************/
+/**
+*  @brief   Get Chip Product ID
+*
+*  This function returns Chip Product ID
+*
+*  @return  Chip Product ID
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getChipProductId(void);
+
+/****************************************************************************/
+/**
+*  @brief   Get revision number
+*
+*  This function returns revision number of the chip
+*
+*  @return  Revision number
+*/
+/****************************************************************************/
+static inline chipcHw_REV_NUMBER_e chipcHw_getChipRevisionNumber(void);
+
+/****************************************************************************/
+/**
+*  @brief   Enables bus interface clock
+*
+*  Enables  bus interface clock of various device
+*
+*  @return  void
+*
+*  @note    use chipcHw_REG_BUS_CLOCK_XXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_busInterfaceClockEnable(uint32_t mask	/*  [ IN ] Bit map of type  chipcHw_REG_BUS_CLOCK_XXXXX */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Disables bus interface clock
+*
+*  Disables  bus interface clock of various device
+*
+*  @return  void
+*
+*  @note    use chipcHw_REG_BUS_CLOCK_XXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_busInterfaceClockDisable(uint32_t mask	/*  [ IN ] Bit map of type  chipcHw_REG_BUS_CLOCK_XXXXX */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Enables various audio channels
+*
+*  Enables audio channel
+*
+*  @return  void
+*
+*  @note    use chipcHw_REG_AUDIO_CHANNEL_XXXXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_audioChannelEnable(uint32_t mask	/*  [ IN ] Bit map of type  chipcHw_REG_AUDIO_CHANNEL_XXXXXX */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Disables various audio channels
+*
+*  Disables audio channel
+*
+*  @return  void
+*
+*  @note    use chipcHw_REG_AUDIO_CHANNEL_XXXXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_audioChannelDisable(uint32_t mask	/*  [ IN ] Bit map of type  chipcHw_REG_AUDIO_CHANNEL_XXXXXX */
+    );
+
+/****************************************************************************/
+/**
+*  @brief    Soft resets devices
+*
+*  Soft resets various devices
+*
+*  @return   void
+*
+*  @note     use chipcHw_REG_SOFT_RESET_XXXXXX defines
+*/
+/****************************************************************************/
+static inline void chipcHw_softReset(uint64_t mask	/*  [ IN ] Bit map of type chipcHw_REG_SOFT_RESET_XXXXXX */
+    );
+
+static inline void chipcHw_softResetDisable(uint64_t mask	/*  [ IN ] Bit map of type chipcHw_REG_SOFT_RESET_XXXXXX */
+    );
+
+static inline void chipcHw_softResetEnable(uint64_t mask	/*  [ IN ] Bit map of type chipcHw_REG_SOFT_RESET_XXXXXX */
+    );
+
+/****************************************************************************/
+/**
+*  @brief    Configures misc CHIP functionality
+*
+*  Configures CHIP functionality
+*
+*  @return   void
+*
+*  @note     use chipcHw_REG_MISC_CTRL_XXXXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_miscControl(uint32_t mask	/*  [ IN ] Bit map of type chipcHw_REG_MISC_CTRL_XXXXXX */
+    );
+
+static inline void chipcHw_miscControlDisable(uint32_t mask	/*  [ IN ] Bit map of type chipcHw_REG_MISC_CTRL_XXXXXX */
+    );
+
+static inline void chipcHw_miscControlEnable(uint32_t mask	/*  [ IN ] Bit map of type chipcHw_REG_MISC_CTRL_XXXXXX */
+    );
+
+/****************************************************************************/
+/**
+*  @brief    Set OTP options
+*
+*  Set OTP options
+*
+*  @return   void
+*
+*  @note     use chipcHw_REG_OTP_XXXXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_setOTPOption(uint64_t mask	/*  [ IN ] Bit map of type chipcHw_REG_OTP_XXXXXX */
+    );
+
+/****************************************************************************/
+/**
+*  @brief    Get sticky bits
+*
+*  @return   Sticky bit options of type chipcHw_REG_STICKY_XXXXXX
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getStickyBits(void);
+
+/****************************************************************************/
+/**
+*  @brief    Set sticky bits
+*
+*  @return   void
+*
+*  @note     use chipcHw_REG_STICKY_XXXXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_setStickyBits(uint32_t mask	/*  [ IN ] Bit map of type chipcHw_REG_STICKY_XXXXXX */
+    );
+
+/****************************************************************************/
+/**
+*  @brief    Clear sticky bits
+*
+*  @return   void
+*
+*  @note     use chipcHw_REG_STICKY_XXXXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_clearStickyBits(uint32_t mask	/*  [ IN ] Bit map of type chipcHw_REG_STICKY_XXXXXX */
+    );
+
+/****************************************************************************/
+/**
+*  @brief    Get software override strap options
+*
+*  Retrieves software override strap options
+*
+*  @return   Software override strap value
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getSoftStraps(void);
+
+/****************************************************************************/
+/**
+*  @brief    Set software override strap options
+*
+*  set software override strap options
+*
+*  @return   nothing
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setSoftStraps(uint32_t strapOptions);
+
+/****************************************************************************/
+/**
+*  @brief    Get pin strap options
+*
+*  Retrieves pin strap options
+*
+*  @return   Pin strap value
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getPinStraps(void);
+
+/****************************************************************************/
+/**
+*  @brief    Get valid pin strap options
+*
+*  Retrieves valid pin strap options
+*
+*  @return   valid Pin strap value
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getValidStraps(void);
+
+/****************************************************************************/
+/**
+*  @brief    Initialize valid pin strap options
+*
+*  Retrieves valid pin strap options by copying HW strap options to soft register
+*  (if chipcHw_STRAPS_SOFT_OVERRIDE not set)
+*
+*  @return   nothing
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_initValidStraps(void);
+
+/****************************************************************************/
+/**
+*  @brief   Get status (enabled/disabled) of bus interface clock
+*
+*  This function returns the status of devices' bus interface clock
+*
+*  @return  Bus interface clock
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getBusInterfaceClockStatus(void);
+
+/****************************************************************************/
+/**
+*  @brief   Get boot device
+*
+*  This function returns the device type used in booting the system
+*
+*  @return  Boot device of type chipcHw_BOOT_DEVICE_e
+*
+*/
+/****************************************************************************/
+static inline chipcHw_BOOT_DEVICE_e chipcHw_getBootDevice(void);
+
+/****************************************************************************/
+/**
+*  @brief   Get boot mode
+*
+*  This function returns the way the system was booted
+*
+*  @return  Boot mode of type chipcHw_BOOT_MODE_e
+*
+*/
+/****************************************************************************/
+static inline chipcHw_BOOT_MODE_e chipcHw_getBootMode(void);
+
+/****************************************************************************/
+/**
+*  @brief   Get NAND flash page size
+*
+*  This function returns the NAND device page size
+*
+*  @return  Boot NAND device page size
+*
+*/
+/****************************************************************************/
+static inline chipcHw_NAND_PAGESIZE_e chipcHw_getNandPageSize(void);
+
+/****************************************************************************/
+/**
+*  @brief   Get NAND flash address cycle configuration
+*
+*  This function returns the NAND flash address cycle configuration
+*
+*  @return  0 = Do not extra address cycle, 1 = Add extra cycle
+*
+*/
+/****************************************************************************/
+static inline int chipcHw_getNandExtraCycle(void);
+
+/****************************************************************************/
+/**
+*  @brief   Activates PIF interface
+*
+*  This function activates PIF interface by taking control of LCD pins
+*
+*  @note
+*       When activated, LCD pins will be defined as follows for PIF operation
+*
+*       CLD[17:0]  = pif_data[17:0]
+*       CLD[23:18] = pif_address[5:0]
+*       CLPOWER    = pif_wr_str
+*       CLCP       = pif_rd_str
+*       CLAC       = pif_hat1
+*       CLFP       = pif_hrdy1
+*       CLLP       = pif_hat2
+*       GPIO[42]   = pif_hrdy2
+*
+*       In PIF mode, "pif_hrdy2" overrides other shared function for GPIO[42] pin
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_activatePifInterface(void);
+
+/****************************************************************************/
+/**
+*  @brief   Activates LCD interface
+*
+*  This function activates LCD interface
+*
+*  @note
+*       When activated, LCD pins will be defined as follows
+*
+*       CLD[17:0]  = LCD data
+*       CLD[23:18] = LCD data
+*       CLPOWER    = LCD power
+*       CLCP       =
+*       CLAC       = LCD ack
+*       CLFP       =
+*       CLLP       =
+*/
+/****************************************************************************/
+static inline void chipcHw_activateLcdInterface(void);
+
+/****************************************************************************/
+/**
+*  @brief   Deactivates PIF/LCD interface
+*
+*  This function deactivates PIF/LCD interface
+*
+*  @note
+*       When deactivated LCD pins will be in rti-stated
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_deactivatePifLcdInterface(void);
+
+/****************************************************************************/
+/**
+*  @brief   Get to know the configuration of GPIO pin
+*
+*/
+/****************************************************************************/
+static inline chipcHw_GPIO_FUNCTION_e chipcHw_getGpioPinFunction(int pin	/* GPIO Pin number */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Configure GPIO pin function
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setGpioPinFunction(int pin,	/* GPIO Pin number */
+					      chipcHw_GPIO_FUNCTION_e func	/* Configuration function */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Set Pin slew rate
+*
+*  This function sets the slew of individual pin
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setPinSlewRate(uint32_t pin,	/* Pin of type chipcHw_PIN_XXXXX */
+					  chipcHw_PIN_SLEW_RATE_e slewRate	/* Pin slew rate */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Set Pin output drive current
+*
+*  This function sets output drive current of individual pin
+*
+*  Note: Avoid the use of the word 'current' since linux headers define this
+*        to be the current task.
+*/
+/****************************************************************************/
+static inline void chipcHw_setPinOutputCurrent(uint32_t pin,	/* Pin of type chipcHw_PIN_XXXXX */
+					       chipcHw_PIN_CURRENT_STRENGTH_e curr	/* Pin current rating */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Set Pin pullup register
+*
+*  This function sets pullup register of individual  pin
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setPinPullup(uint32_t pin,	/* Pin of type chipcHw_PIN_XXXXX */
+					chipcHw_PIN_PULL_e pullup	/* Pullup register settings */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Set Pin input type
+*
+*  This function sets input type of individual Pin
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setPinInputType(uint32_t pin,	/* Pin of type chipcHw_PIN_XXXXX */
+					   chipcHw_PIN_INPUTTYPE_e inputType	/* Pin input type */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Retrieves a string representation of the mux setting for a pin.
+*
+*  @return  Pointer to a character string.
+*/
+/****************************************************************************/
+
+const char *chipcHw_getGpioPinFunctionStr(int pin);
+
+/****************************************************************************/
+/**  @brief issue warmReset
+ */
+/****************************************************************************/
+void chipcHw_reset(uint32_t mask);
+
+/****************************************************************************/
+/**  @brief clock reconfigure
+ */
+/****************************************************************************/
+void chipcHw_clockReconfig(uint32_t busHz, uint32_t armRatio, uint32_t vpmRatio,
+			   uint32_t ddrRatio);
+
+/****************************************************************************/
+/**
+*  @brief   Enable Spread Spectrum
+*
+*  @note chipcHw_Init() must be called earlier
+*/
+/****************************************************************************/
+static inline void chipcHw_enableSpreadSpectrum(void);
+
+/****************************************************************************/
+/**
+*  @brief   Disable Spread Spectrum
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_disableSpreadSpectrum(void);
+
+/****************************************************************************/
+/**  @brief Checks if software strap is enabled
+ *
+ *   @return 1 : When enable
+ *           0 : When disable
+ */
+/****************************************************************************/
+static inline int chipcHw_isSoftwareStrapsEnable(void);
+
+/****************************************************************************/
+/**  @brief Enable software strap
+ */
+/****************************************************************************/
+static inline void chipcHw_softwareStrapsEnable(void);
+
+/****************************************************************************/
+/**  @brief Disable software strap
+ */
+/****************************************************************************/
+static inline void chipcHw_softwareStrapsDisable(void);
+
+/****************************************************************************/
+/**  @brief PLL test enable
+ */
+/****************************************************************************/
+static inline void chipcHw_pllTestEnable(void);
+
+/****************************************************************************/
+/**  @brief PLL2 test enable
+ */
+/****************************************************************************/
+static inline void chipcHw_pll2TestEnable(void);
+
+/****************************************************************************/
+/**  @brief PLL test disable
+ */
+/****************************************************************************/
+static inline void chipcHw_pllTestDisable(void);
+
+/****************************************************************************/
+/**  @brief PLL2 test disable
+ */
+/****************************************************************************/
+static inline void chipcHw_pll2TestDisable(void);
+
+/****************************************************************************/
+/**  @brief Get PLL test status
+ */
+/****************************************************************************/
+static inline int chipcHw_isPllTestEnable(void);
+
+/****************************************************************************/
+/**  @brief Get PLL2 test status
+ */
+/****************************************************************************/
+static inline int chipcHw_isPll2TestEnable(void);
+
+/****************************************************************************/
+/**  @brief PLL test select
+ */
+/****************************************************************************/
+static inline void chipcHw_pllTestSelect(uint32_t val);
+
+/****************************************************************************/
+/**  @brief PLL2 test select
+ */
+/****************************************************************************/
+static inline void chipcHw_pll2TestSelect(uint32_t val);
+
+/****************************************************************************/
+/**  @brief Get PLL test selected option
+ */
+/****************************************************************************/
+static inline uint8_t chipcHw_getPllTestSelected(void);
+
+/****************************************************************************/
+/**  @brief Get PLL2 test selected option
+ */
+/****************************************************************************/
+static inline uint8_t chipcHw_getPll2TestSelected(void);
+
+/****************************************************************************/
+/**
+*  @brief   Enables DDR SW phase alignment interrupt
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrPhaseAlignInterruptEnable(void);
+
+/****************************************************************************/
+/**
+*  @brief   Disables DDR SW phase alignment interrupt
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrPhaseAlignInterruptDisable(void);
+
+/****************************************************************************/
+/**
+*  @brief   Set VPM SW phase alignment interrupt mode
+*
+*  This function sets VPM phase alignment interrupt
+*
+*/
+/****************************************************************************/
+static inline void
+chipcHw_vpmPhaseAlignInterruptMode(chipcHw_VPM_HW_PHASE_INTR_e mode);
+
+/****************************************************************************/
+/**
+*  @brief   Enable DDR phase alignment in software
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrSwPhaseAlignEnable(void);
+
+/****************************************************************************/
+/**
+*  @brief   Disable DDR phase alignment in software
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrSwPhaseAlignDisable(void);
+
+/****************************************************************************/
+/**
+*  @brief   Enable DDR phase alignment in hardware
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrHwPhaseAlignEnable(void);
+
+/****************************************************************************/
+/**
+*  @brief   Disable DDR phase alignment in hardware
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrHwPhaseAlignDisable(void);
+
+/****************************************************************************/
+/**
+*  @brief   Enable VPM phase alignment in software
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmSwPhaseAlignEnable(void);
+
+/****************************************************************************/
+/**
+*  @brief   Disable VPM phase alignment in software
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmSwPhaseAlignDisable(void);
+
+/****************************************************************************/
+/**
+*  @brief   Enable VPM phase alignment in hardware
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmHwPhaseAlignEnable(void);
+
+/****************************************************************************/
+/**
+*  @brief   Disable VPM phase alignment in hardware
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmHwPhaseAlignDisable(void);
+
+/****************************************************************************/
+/**
+*  @brief   Set DDR phase alignment margin in hardware
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setDdrHwPhaseAlignMargin(chipcHw_DDR_HW_PHASE_MARGIN_e margin	/* Margin alinging DDR  phase */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Set VPM phase alignment margin in hardware
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setVpmHwPhaseAlignMargin(chipcHw_VPM_HW_PHASE_MARGIN_e margin	/* Margin alinging VPM  phase */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Checks DDR phase aligned status done by HW
+*
+*  @return  1: When aligned
+*           0: When not aligned
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_isDdrHwPhaseAligned(void);
+
+/****************************************************************************/
+/**
+*  @brief   Checks VPM phase aligned status done by HW
+*
+*  @return  1: When aligned
+*           0: When not aligned
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_isVpmHwPhaseAligned(void);
+
+/****************************************************************************/
+/**
+*  @brief   Get DDR phase aligned status done by HW
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getDdrHwPhaseAlignStatus(void);
+
+/****************************************************************************/
+/**
+*  @brief   Get VPM phase aligned status done by HW
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getVpmHwPhaseAlignStatus(void);
+
+/****************************************************************************/
+/**
+*  @brief   Get DDR phase control value
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getDdrPhaseControl(void);
+
+/****************************************************************************/
+/**
+*  @brief   Get VPM phase control value
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getVpmPhaseControl(void);
+
+/****************************************************************************/
+/**
+*  @brief   DDR phase alignment timeout count
+*
+*  @note    If HW fails to perform the phase alignment, it will trigger
+*           a DDR phase alignment timeout interrupt.
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrHwPhaseAlignTimeout(uint32_t busCycle	/* Timeout in bus cycle */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   VPM phase alignment timeout count
+*
+*  @note    If HW fails to perform the phase alignment, it will trigger
+*           a VPM phase alignment timeout interrupt.
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmHwPhaseAlignTimeout(uint32_t busCycle	/* Timeout in bus cycle */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   DDR phase alignment timeout interrupt enable
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrHwPhaseAlignTimeoutInterruptEnable(void);
+
+/****************************************************************************/
+/**
+*  @brief   VPM phase alignment timeout interrupt enable
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmHwPhaseAlignTimeoutInterruptEnable(void);
+
+/****************************************************************************/
+/**
+*  @brief   DDR phase alignment timeout interrupt disable
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrHwPhaseAlignTimeoutInterruptDisable(void);
+
+/****************************************************************************/
+/**
+*  @brief   VPM phase alignment timeout interrupt disable
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmHwPhaseAlignTimeoutInterruptDisable(void);
+
+/****************************************************************************/
+/**
+*  @brief   Clear DDR phase alignment timeout interrupt
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrHwPhaseAlignTimeoutInterruptClear(void);
+
+/****************************************************************************/
+/**
+*  @brief   Clear VPM phase alignment timeout interrupt
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmHwPhaseAlignTimeoutInterruptClear(void);
+
+/* ---- Private Constants and Types -------------------------------------- */
+
+#endif /* CHIPC_DEF_H */
diff --git a/arch/arm/mach-bcmring/include/mach/csp/chipcHw_inline.h b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_inline.h
new file mode 100644
index 000000000000..c78833acb37a
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_inline.h
@@ -0,0 +1,1673 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#ifndef CHIPC_INLINE_H
+#define CHIPC_INLINE_H
+
+/* ---- Include Files ----------------------------------------------------- */
+
+#include <csp/errno.h>
+#include <csp/reg.h>
+#include <mach/csp/chipcHw_reg.h>
+#include <mach/csp/chipcHw_def.h>
+
+/* ---- Private Constants and Types --------------------------------------- */
+typedef enum {
+	chipcHw_OPTYPE_BYPASS,	/* Bypass operation */
+	chipcHw_OPTYPE_OUTPUT	/* Output operation */
+} chipcHw_OPTYPE_e;
+
+/* ---- Public Constants and Types ---------------------------------------- */
+/* ---- Public Variable Externs ------------------------------------------- */
+/* ---- Public Function Prototypes ---------------------------------------- */
+/* ---- Private Function Prototypes --------------------------------------- */
+static inline void chipcHw_setClock(chipcHw_CLOCK_e clock,
+				    chipcHw_OPTYPE_e type, int mode);
+
+/****************************************************************************/
+/**
+*  @brief   Get Numeric Chip ID
+*
+*  This function returns Chip ID that includes the revison number
+*
+*  @return  Complete numeric Chip ID
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getChipId(void)
+{
+	return pChipcHw->ChipId;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Enable Spread Spectrum
+*
+*  @note chipcHw_Init() must be called earlier
+*/
+/****************************************************************************/
+static inline void chipcHw_enableSpreadSpectrum(void)
+{
+	if ((pChipcHw->
+	     PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASK) !=
+	    chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER) {
+		ddrcReg_PHY_ADDR_CTL_REGP->ssCfg =
+		    (0xFFFF << ddrcReg_PHY_ADDR_SS_CFG_NDIV_AMPLITUDE_SHIFT) |
+		    (ddrcReg_PHY_ADDR_SS_CFG_MIN_CYCLE_PER_TICK <<
+		     ddrcReg_PHY_ADDR_SS_CFG_CYCLE_PER_TICK_SHIFT);
+		ddrcReg_PHY_ADDR_CTL_REGP->ssCtl |=
+		    ddrcReg_PHY_ADDR_SS_CTRL_ENABLE;
+	}
+}
+
+/****************************************************************************/
+/**
+*  @brief   Disable Spread Spectrum
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_disableSpreadSpectrum(void)
+{
+	ddrcReg_PHY_ADDR_CTL_REGP->ssCtl &= ~ddrcReg_PHY_ADDR_SS_CTRL_ENABLE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Get Chip Product ID
+*
+*  This function returns Chip Product ID
+*
+*  @return  Chip Product ID
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getChipProductId(void)
+{
+	return (pChipcHw->
+		 ChipId & chipcHw_REG_CHIPID_BASE_MASK) >>
+		chipcHw_REG_CHIPID_BASE_SHIFT;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Get revision number
+*
+*  This function returns revision number of the chip
+*
+*  @return  Revision number
+*/
+/****************************************************************************/
+static inline chipcHw_REV_NUMBER_e chipcHw_getChipRevisionNumber(void)
+{
+	return pChipcHw->ChipId & chipcHw_REG_CHIPID_REV_MASK;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Enables bus interface clock
+*
+*  Enables  bus interface clock of various device
+*
+*  @return  void
+*
+*  @note    use chipcHw_REG_BUS_CLOCK_XXXX for mask
+*/
+/****************************************************************************/
+static inline void chipcHw_busInterfaceClockEnable(uint32_t mask)
+{
+	reg32_modify_or(&pChipcHw->BusIntfClock, mask);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Disables bus interface clock
+*
+*  Disables  bus interface clock of various device
+*
+*  @return  void
+*
+*  @note    use chipcHw_REG_BUS_CLOCK_XXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_busInterfaceClockDisable(uint32_t mask)
+{
+	reg32_modify_and(&pChipcHw->BusIntfClock, ~mask);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Get status (enabled/disabled) of bus interface clock
+*
+*  This function returns the status of devices' bus interface clock
+*
+*  @return  Bus interface clock
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getBusInterfaceClockStatus(void)
+{
+	return pChipcHw->BusIntfClock;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Enables various audio channels
+*
+*  Enables audio channel
+*
+*  @return  void
+*
+*  @note    use chipcHw_REG_AUDIO_CHANNEL_XXXXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_audioChannelEnable(uint32_t mask)
+{
+	reg32_modify_or(&pChipcHw->AudioEnable, mask);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Disables various audio channels
+*
+*  Disables audio channel
+*
+*  @return  void
+*
+*  @note    use chipcHw_REG_AUDIO_CHANNEL_XXXXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_audioChannelDisable(uint32_t mask)
+{
+	reg32_modify_and(&pChipcHw->AudioEnable, ~mask);
+}
+
+/****************************************************************************/
+/**
+*  @brief    Soft resets devices
+*
+*  Soft resets various devices
+*
+*  @return   void
+*
+*  @note     use chipcHw_REG_SOFT_RESET_XXXXXX defines
+*/
+/****************************************************************************/
+static inline void chipcHw_softReset(uint64_t mask)
+{
+	chipcHw_softResetEnable(mask);
+	chipcHw_softResetDisable(mask);
+}
+
+static inline void chipcHw_softResetDisable(uint64_t mask)
+{
+	uint32_t ctrl1 = (uint32_t) mask;
+	uint32_t ctrl2 = (uint32_t) (mask >> 32);
+
+	/* Deassert module soft reset */
+	REG_LOCAL_IRQ_SAVE;
+	pChipcHw->SoftReset1 ^= ctrl1;
+	pChipcHw->SoftReset2 ^= (ctrl2 & (~chipcHw_REG_SOFT_RESET_UNHOLD_MASK));
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+static inline void chipcHw_softResetEnable(uint64_t mask)
+{
+	uint32_t ctrl1 = (uint32_t) mask;
+	uint32_t ctrl2 = (uint32_t) (mask >> 32);
+	uint32_t unhold = 0;
+
+	REG_LOCAL_IRQ_SAVE;
+	pChipcHw->SoftReset1 |= ctrl1;
+	/* Mask out unhold request bits */
+	pChipcHw->SoftReset2 |= (ctrl2 & (~chipcHw_REG_SOFT_RESET_UNHOLD_MASK));
+
+	/* Process unhold requests */
+	if (ctrl2 & chipcHw_REG_SOFT_RESET_VPM_GLOBAL_UNHOLD) {
+		unhold = chipcHw_REG_SOFT_RESET_VPM_GLOBAL_HOLD;
+	}
+
+	if (ctrl2 & chipcHw_REG_SOFT_RESET_VPM_UNHOLD) {
+		unhold |= chipcHw_REG_SOFT_RESET_VPM_HOLD;
+	}
+
+	if (ctrl2 & chipcHw_REG_SOFT_RESET_ARM_UNHOLD) {
+		unhold |= chipcHw_REG_SOFT_RESET_ARM_HOLD;
+	}
+
+	if (unhold) {
+		/* Make sure unhold request is effective */
+		pChipcHw->SoftReset1 &= ~unhold;
+	}
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief    Configures misc CHIP functionality
+*
+*  Configures CHIP functionality
+*
+*  @return   void
+*
+*  @note     use chipcHw_REG_MISC_CTRL_XXXXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_miscControl(uint32_t mask)
+{
+	reg32_write(&pChipcHw->MiscCtrl, mask);
+}
+
+static inline void chipcHw_miscControlDisable(uint32_t mask)
+{
+	reg32_modify_and(&pChipcHw->MiscCtrl, ~mask);
+}
+
+static inline void chipcHw_miscControlEnable(uint32_t mask)
+{
+	reg32_modify_or(&pChipcHw->MiscCtrl, mask);
+}
+
+/****************************************************************************/
+/**
+*  @brief    Set OTP options
+*
+*  Set OTP options
+*
+*  @return   void
+*
+*  @note     use chipcHw_REG_OTP_XXXXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_setOTPOption(uint64_t mask)
+{
+	uint32_t ctrl1 = (uint32_t) mask;
+	uint32_t ctrl2 = (uint32_t) (mask >> 32);
+
+	reg32_modify_or(&pChipcHw->SoftOTP1, ctrl1);
+	reg32_modify_or(&pChipcHw->SoftOTP2, ctrl2);
+}
+
+/****************************************************************************/
+/**
+*  @brief    Get sticky bits
+*
+*  @return   Sticky bit options of type chipcHw_REG_STICKY_XXXXXX
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getStickyBits(void)
+{
+	return pChipcHw->Sticky;
+}
+
+/****************************************************************************/
+/**
+*  @brief    Set sticky bits
+*
+*  @return   void
+*
+*  @note     use chipcHw_REG_STICKY_XXXXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_setStickyBits(uint32_t mask)
+{
+	uint32_t bits = 0;
+
+	REG_LOCAL_IRQ_SAVE;
+	if (mask & chipcHw_REG_STICKY_POR_BROM) {
+		bits |= chipcHw_REG_STICKY_POR_BROM;
+	} else {
+		uint32_t sticky;
+		sticky = pChipcHw->Sticky;
+
+		if ((mask & chipcHw_REG_STICKY_BOOT_DONE)
+		    && (sticky & chipcHw_REG_STICKY_BOOT_DONE) == 0) {
+			bits |= chipcHw_REG_STICKY_BOOT_DONE;
+		}
+		if ((mask & chipcHw_REG_STICKY_GENERAL_1)
+		    && (sticky & chipcHw_REG_STICKY_GENERAL_1) == 0) {
+			bits |= chipcHw_REG_STICKY_GENERAL_1;
+		}
+		if ((mask & chipcHw_REG_STICKY_GENERAL_2)
+		    && (sticky & chipcHw_REG_STICKY_GENERAL_2) == 0) {
+			bits |= chipcHw_REG_STICKY_GENERAL_2;
+		}
+		if ((mask & chipcHw_REG_STICKY_GENERAL_3)
+		    && (sticky & chipcHw_REG_STICKY_GENERAL_3) == 0) {
+			bits |= chipcHw_REG_STICKY_GENERAL_3;
+		}
+		if ((mask & chipcHw_REG_STICKY_GENERAL_4)
+		    && (sticky & chipcHw_REG_STICKY_GENERAL_4) == 0) {
+			bits |= chipcHw_REG_STICKY_GENERAL_4;
+		}
+		if ((mask & chipcHw_REG_STICKY_GENERAL_5)
+		    && (sticky & chipcHw_REG_STICKY_GENERAL_5) == 0) {
+			bits |= chipcHw_REG_STICKY_GENERAL_5;
+		}
+	}
+	pChipcHw->Sticky = bits;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief    Clear sticky bits
+*
+*  @return   void
+*
+*  @note     use chipcHw_REG_STICKY_XXXXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_clearStickyBits(uint32_t mask)
+{
+	uint32_t bits = 0;
+
+	REG_LOCAL_IRQ_SAVE;
+	if (mask &
+	    (chipcHw_REG_STICKY_BOOT_DONE | chipcHw_REG_STICKY_GENERAL_1 |
+	     chipcHw_REG_STICKY_GENERAL_2 | chipcHw_REG_STICKY_GENERAL_3 |
+	     chipcHw_REG_STICKY_GENERAL_4 | chipcHw_REG_STICKY_GENERAL_5)) {
+		uint32_t sticky = pChipcHw->Sticky;
+
+		if ((mask & chipcHw_REG_STICKY_BOOT_DONE)
+		    && (sticky & chipcHw_REG_STICKY_BOOT_DONE)) {
+			bits = chipcHw_REG_STICKY_BOOT_DONE;
+			mask &= ~chipcHw_REG_STICKY_BOOT_DONE;
+		}
+		if ((mask & chipcHw_REG_STICKY_GENERAL_1)
+		    && (sticky & chipcHw_REG_STICKY_GENERAL_1)) {
+			bits |= chipcHw_REG_STICKY_GENERAL_1;
+			mask &= ~chipcHw_REG_STICKY_GENERAL_1;
+		}
+		if ((mask & chipcHw_REG_STICKY_GENERAL_2)
+		    && (sticky & chipcHw_REG_STICKY_GENERAL_2)) {
+			bits |= chipcHw_REG_STICKY_GENERAL_2;
+			mask &= ~chipcHw_REG_STICKY_GENERAL_2;
+		}
+		if ((mask & chipcHw_REG_STICKY_GENERAL_3)
+		    && (sticky & chipcHw_REG_STICKY_GENERAL_3)) {
+			bits |= chipcHw_REG_STICKY_GENERAL_3;
+			mask &= ~chipcHw_REG_STICKY_GENERAL_3;
+		}
+		if ((mask & chipcHw_REG_STICKY_GENERAL_4)
+		    && (sticky & chipcHw_REG_STICKY_GENERAL_4)) {
+			bits |= chipcHw_REG_STICKY_GENERAL_4;
+			mask &= ~chipcHw_REG_STICKY_GENERAL_4;
+		}
+		if ((mask & chipcHw_REG_STICKY_GENERAL_5)
+		    && (sticky & chipcHw_REG_STICKY_GENERAL_5)) {
+			bits |= chipcHw_REG_STICKY_GENERAL_5;
+			mask &= ~chipcHw_REG_STICKY_GENERAL_5;
+		}
+	}
+	pChipcHw->Sticky = bits | mask;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief    Get software strap value
+*
+*  Retrieves software strap value
+*
+*  @return   Software strap value
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getSoftStraps(void)
+{
+	return pChipcHw->SoftStraps;
+}
+
+/****************************************************************************/
+/**
+*  @brief    Set software override strap options
+*
+*  set software override strap options
+*
+*  @return   nothing
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setSoftStraps(uint32_t strapOptions)
+{
+	reg32_write(&pChipcHw->SoftStraps, strapOptions);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Get Pin Strap Options
+*
+*  This function returns the raw boot strap options
+*
+*  @return  strap options
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getPinStraps(void)
+{
+	return pChipcHw->PinStraps;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Get Valid Strap Options
+*
+*  This function returns the valid raw boot strap options
+*
+*  @return  strap options
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getValidStraps(void)
+{
+	uint32_t softStraps;
+
+	/*
+	 ** Always return the SoftStraps - bootROM calls chipcHw_initValidStraps
+	 ** which copies HW straps to soft straps if there is no override
+	 */
+	softStraps = chipcHw_getSoftStraps();
+
+	return softStraps;
+}
+
+/****************************************************************************/
+/**
+*  @brief    Initialize valid pin strap options
+*
+*  Retrieves valid pin strap options by copying HW strap options to soft register
+*  (if chipcHw_STRAPS_SOFT_OVERRIDE not set)
+*
+*  @return   nothing
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_initValidStraps(void)
+{
+	uint32_t softStraps;
+
+	REG_LOCAL_IRQ_SAVE;
+	softStraps = chipcHw_getSoftStraps();
+
+	if ((softStraps & chipcHw_STRAPS_SOFT_OVERRIDE) == 0) {
+		/* Copy HW straps to software straps */
+		chipcHw_setSoftStraps(chipcHw_getPinStraps());
+	}
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Get boot device
+*
+*  This function returns the device type used in booting the system
+*
+*  @return  Boot device of type chipcHw_BOOT_DEVICE
+*
+*/
+/****************************************************************************/
+static inline chipcHw_BOOT_DEVICE_e chipcHw_getBootDevice(void)
+{
+	return chipcHw_getValidStraps() & chipcHw_STRAPS_BOOT_DEVICE_MASK;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Get boot mode
+*
+*  This function returns the way the system was booted
+*
+*  @return  Boot mode of type chipcHw_BOOT_MODE
+*
+*/
+/****************************************************************************/
+static inline chipcHw_BOOT_MODE_e chipcHw_getBootMode(void)
+{
+	return chipcHw_getValidStraps() & chipcHw_STRAPS_BOOT_MODE_MASK;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Get NAND flash page size
+*
+*  This function returns the NAND device page size
+*
+*  @return  Boot NAND device page size
+*
+*/
+/****************************************************************************/
+static inline chipcHw_NAND_PAGESIZE_e chipcHw_getNandPageSize(void)
+{
+	return chipcHw_getValidStraps() & chipcHw_STRAPS_NAND_PAGESIZE_MASK;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Get NAND flash address cycle configuration
+*
+*  This function returns the NAND flash address cycle configuration
+*
+*  @return  0 = Do not extra address cycle, 1 = Add extra cycle
+*
+*/
+/****************************************************************************/
+static inline int chipcHw_getNandExtraCycle(void)
+{
+	if (chipcHw_getValidStraps() & chipcHw_STRAPS_NAND_EXTRA_CYCLE) {
+		return 1;
+	} else {
+		return 0;
+	}
+}
+
+/****************************************************************************/
+/**
+*  @brief   Activates PIF interface
+*
+*  This function activates PIF interface by taking control of LCD pins
+*
+*  @note
+*       When activated, LCD pins will be defined as follows for PIF operation
+*
+*       CLD[17:0]  = pif_data[17:0]
+*       CLD[23:18] = pif_address[5:0]
+*       CLPOWER    = pif_wr_str
+*       CLCP       = pif_rd_str
+*       CLAC       = pif_hat1
+*       CLFP       = pif_hrdy1
+*       CLLP       = pif_hat2
+*       GPIO[42]   = pif_hrdy2
+*
+*       In PIF mode, "pif_hrdy2" overrides other shared function for GPIO[42] pin
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_activatePifInterface(void)
+{
+	reg32_write(&pChipcHw->LcdPifMode, chipcHw_REG_PIF_PIN_ENABLE);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Activates LCD interface
+*
+*  This function activates LCD interface
+*
+*  @note
+*       When activated, LCD pins will be defined as follows
+*
+*       CLD[17:0]  = LCD data
+*       CLD[23:18] = LCD data
+*       CLPOWER    = LCD power
+*       CLCP       =
+*       CLAC       = LCD ack
+*       CLFP       =
+*       CLLP       =
+*/
+/****************************************************************************/
+static inline void chipcHw_activateLcdInterface(void)
+{
+	reg32_write(&pChipcHw->LcdPifMode, chipcHw_REG_LCD_PIN_ENABLE);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Deactivates PIF/LCD interface
+*
+*  This function deactivates PIF/LCD interface
+*
+*  @note
+*       When deactivated LCD pins will be in rti-stated
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_deactivatePifLcdInterface(void)
+{
+	reg32_write(&pChipcHw->LcdPifMode, 0);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Select GE2
+*
+*  This function select GE2 as the graphic engine
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_selectGE2(void)
+{
+	reg32_modify_and(&pChipcHw->MiscCtrl, ~chipcHw_REG_MISC_CTRL_GE_SEL);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Select GE3
+*
+*  This function select GE3 as the graphic engine
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_selectGE3(void)
+{
+	reg32_modify_or(&pChipcHw->MiscCtrl, chipcHw_REG_MISC_CTRL_GE_SEL);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Get to know the configuration of GPIO pin
+*
+*/
+/****************************************************************************/
+static inline chipcHw_GPIO_FUNCTION_e chipcHw_getGpioPinFunction(int pin)
+{
+	return (*((uint32_t *) chipcHw_REG_GPIO_MUX(pin)) &
+		(chipcHw_REG_GPIO_MUX_MASK <<
+		 chipcHw_REG_GPIO_MUX_POSITION(pin))) >>
+	    chipcHw_REG_GPIO_MUX_POSITION(pin);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Configure GPIO pin function
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setGpioPinFunction(int pin,
+					      chipcHw_GPIO_FUNCTION_e func)
+{
+	REG_LOCAL_IRQ_SAVE;
+	*((uint32_t *) chipcHw_REG_GPIO_MUX(pin)) &=
+	    ~(chipcHw_REG_GPIO_MUX_MASK << chipcHw_REG_GPIO_MUX_POSITION(pin));
+	*((uint32_t *) chipcHw_REG_GPIO_MUX(pin)) |=
+	    func << chipcHw_REG_GPIO_MUX_POSITION(pin);
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Set Pin slew rate
+*
+*  This function sets the slew of individual pin
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setPinSlewRate(uint32_t pin,
+					  chipcHw_PIN_SLEW_RATE_e slewRate)
+{
+	REG_LOCAL_IRQ_SAVE;
+	*((uint32_t *) chipcHw_REG_SLEW_RATE(pin)) &=
+	    ~(chipcHw_REG_SLEW_RATE_MASK <<
+	      chipcHw_REG_SLEW_RATE_POSITION(pin));
+	*((uint32_t *) chipcHw_REG_SLEW_RATE(pin)) |=
+	    (uint32_t) slewRate << chipcHw_REG_SLEW_RATE_POSITION(pin);
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Set Pin output drive current
+*
+*  This function sets output drive current of individual pin
+*
+*  Note: Avoid the use of the word 'current' since linux headers define this
+*        to be the current task.
+*/
+/****************************************************************************/
+static inline void chipcHw_setPinOutputCurrent(uint32_t pin,
+					       chipcHw_PIN_CURRENT_STRENGTH_e
+					       curr)
+{
+	REG_LOCAL_IRQ_SAVE;
+	*((uint32_t *) chipcHw_REG_CURRENT(pin)) &=
+	    ~(chipcHw_REG_CURRENT_MASK << chipcHw_REG_CURRENT_POSITION(pin));
+	*((uint32_t *) chipcHw_REG_CURRENT(pin)) |=
+	    (uint32_t) curr << chipcHw_REG_CURRENT_POSITION(pin);
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Set Pin pullup register
+*
+*  This function sets pullup register of individual pin
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setPinPullup(uint32_t pin, chipcHw_PIN_PULL_e pullup)
+{
+	REG_LOCAL_IRQ_SAVE;
+	*((uint32_t *) chipcHw_REG_PULLUP(pin)) &=
+	    ~(chipcHw_REG_PULLUP_MASK << chipcHw_REG_PULLUP_POSITION(pin));
+	*((uint32_t *) chipcHw_REG_PULLUP(pin)) |=
+	    (uint32_t) pullup << chipcHw_REG_PULLUP_POSITION(pin);
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Set Pin input type
+*
+*  This function sets input type of individual pin
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setPinInputType(uint32_t pin,
+					   chipcHw_PIN_INPUTTYPE_e inputType)
+{
+	REG_LOCAL_IRQ_SAVE;
+	*((uint32_t *) chipcHw_REG_INPUTTYPE(pin)) &=
+	    ~(chipcHw_REG_INPUTTYPE_MASK <<
+	      chipcHw_REG_INPUTTYPE_POSITION(pin));
+	*((uint32_t *) chipcHw_REG_INPUTTYPE(pin)) |=
+	    (uint32_t) inputType << chipcHw_REG_INPUTTYPE_POSITION(pin);
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Power up the USB PHY
+*
+*  This function powers up the USB PHY
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_powerUpUsbPhy(void)
+{
+	reg32_modify_and(&pChipcHw->MiscCtrl,
+			 chipcHw_REG_MISC_CTRL_USB_POWERON);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Power down the USB PHY
+*
+*  This function powers down the USB PHY
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_powerDownUsbPhy(void)
+{
+	reg32_modify_or(&pChipcHw->MiscCtrl,
+			chipcHw_REG_MISC_CTRL_USB_POWEROFF);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Set the 2nd USB as host
+*
+*  This function sets the 2nd USB as host
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setUsbHost(void)
+{
+	reg32_modify_or(&pChipcHw->MiscCtrl,
+			chipcHw_REG_MISC_CTRL_USB_MODE_HOST);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Set the 2nd USB as device
+*
+*  This function sets the 2nd USB as device
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setUsbDevice(void)
+{
+	reg32_modify_and(&pChipcHw->MiscCtrl,
+			 chipcHw_REG_MISC_CTRL_USB_MODE_DEVICE);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Lower layer funtion to enable/disable a clock of a certain device
+*
+*  This function enables/disables a core clock
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setClock(chipcHw_CLOCK_e clock,
+				    chipcHw_OPTYPE_e type, int mode)
+{
+	volatile uint32_t *pPLLReg = (uint32_t *) 0x0;
+	volatile uint32_t *pClockCtrl = (uint32_t *) 0x0;
+
+	switch (clock) {
+	case chipcHw_CLOCK_DDR:
+		pPLLReg = &pChipcHw->DDRClock;
+		break;
+	case chipcHw_CLOCK_ARM:
+		pPLLReg = &pChipcHw->ARMClock;
+		break;
+	case chipcHw_CLOCK_ESW:
+		pPLLReg = &pChipcHw->ESWClock;
+		break;
+	case chipcHw_CLOCK_VPM:
+		pPLLReg = &pChipcHw->VPMClock;
+		break;
+	case chipcHw_CLOCK_ESW125:
+		pPLLReg = &pChipcHw->ESW125Clock;
+		break;
+	case chipcHw_CLOCK_UART:
+		pPLLReg = &pChipcHw->UARTClock;
+		break;
+	case chipcHw_CLOCK_SDIO0:
+		pPLLReg = &pChipcHw->SDIO0Clock;
+		break;
+	case chipcHw_CLOCK_SDIO1:
+		pPLLReg = &pChipcHw->SDIO1Clock;
+		break;
+	case chipcHw_CLOCK_SPI:
+		pPLLReg = &pChipcHw->SPIClock;
+		break;
+	case chipcHw_CLOCK_ETM:
+		pPLLReg = &pChipcHw->ETMClock;
+		break;
+	case chipcHw_CLOCK_USB:
+		pPLLReg = &pChipcHw->USBClock;
+		if (type == chipcHw_OPTYPE_OUTPUT) {
+			if (mode) {
+				reg32_modify_and(pPLLReg,
+						 ~chipcHw_REG_PLL_CLOCK_POWER_DOWN);
+			} else {
+				reg32_modify_or(pPLLReg,
+						chipcHw_REG_PLL_CLOCK_POWER_DOWN);
+			}
+		}
+		break;
+	case chipcHw_CLOCK_LCD:
+		pPLLReg = &pChipcHw->LCDClock;
+		if (type == chipcHw_OPTYPE_OUTPUT) {
+			if (mode) {
+				reg32_modify_and(pPLLReg,
+						 ~chipcHw_REG_PLL_CLOCK_POWER_DOWN);
+			} else {
+				reg32_modify_or(pPLLReg,
+						chipcHw_REG_PLL_CLOCK_POWER_DOWN);
+			}
+		}
+		break;
+	case chipcHw_CLOCK_APM:
+		pPLLReg = &pChipcHw->APMClock;
+		if (type == chipcHw_OPTYPE_OUTPUT) {
+			if (mode) {
+				reg32_modify_and(pPLLReg,
+						 ~chipcHw_REG_PLL_CLOCK_POWER_DOWN);
+			} else {
+				reg32_modify_or(pPLLReg,
+						chipcHw_REG_PLL_CLOCK_POWER_DOWN);
+			}
+		}
+		break;
+	case chipcHw_CLOCK_BUS:
+		pClockCtrl = &pChipcHw->ACLKClock;
+		break;
+	case chipcHw_CLOCK_OTP:
+		pClockCtrl = &pChipcHw->OTPClock;
+		break;
+	case chipcHw_CLOCK_I2C:
+		pClockCtrl = &pChipcHw->I2CClock;
+		break;
+	case chipcHw_CLOCK_I2S0:
+		pClockCtrl = &pChipcHw->I2S0Clock;
+		break;
+	case chipcHw_CLOCK_RTBUS:
+		pClockCtrl = &pChipcHw->RTBUSClock;
+		break;
+	case chipcHw_CLOCK_APM100:
+		pClockCtrl = &pChipcHw->APM100Clock;
+		break;
+	case chipcHw_CLOCK_TSC:
+		pClockCtrl = &pChipcHw->TSCClock;
+		break;
+	case chipcHw_CLOCK_LED:
+		pClockCtrl = &pChipcHw->LEDClock;
+		break;
+	case chipcHw_CLOCK_I2S1:
+		pClockCtrl = &pChipcHw->I2S1Clock;
+		break;
+	}
+
+	if (pPLLReg) {
+		switch (type) {
+		case chipcHw_OPTYPE_OUTPUT:
+			/* PLL clock output enable/disable */
+			if (mode) {
+				if (clock == chipcHw_CLOCK_DDR) {
+					/* DDR clock enable is inverted */
+					reg32_modify_and(pPLLReg,
+							 ~chipcHw_REG_PLL_CLOCK_OUTPUT_ENABLE);
+				} else {
+					reg32_modify_or(pPLLReg,
+							chipcHw_REG_PLL_CLOCK_OUTPUT_ENABLE);
+				}
+			} else {
+				if (clock == chipcHw_CLOCK_DDR) {
+					/* DDR clock disable is inverted */
+					reg32_modify_or(pPLLReg,
+							chipcHw_REG_PLL_CLOCK_OUTPUT_ENABLE);
+				} else {
+					reg32_modify_and(pPLLReg,
+							 ~chipcHw_REG_PLL_CLOCK_OUTPUT_ENABLE);
+				}
+			}
+			break;
+		case chipcHw_OPTYPE_BYPASS:
+			/* PLL clock bypass enable/disable */
+			if (mode) {
+				reg32_modify_or(pPLLReg,
+						chipcHw_REG_PLL_CLOCK_BYPASS_SELECT);
+			} else {
+				reg32_modify_and(pPLLReg,
+						 ~chipcHw_REG_PLL_CLOCK_BYPASS_SELECT);
+			}
+			break;
+		}
+	} else if (pClockCtrl) {
+		switch (type) {
+		case chipcHw_OPTYPE_OUTPUT:
+			if (mode) {
+				reg32_modify_or(pClockCtrl,
+						chipcHw_REG_DIV_CLOCK_OUTPUT_ENABLE);
+			} else {
+				reg32_modify_and(pClockCtrl,
+						 ~chipcHw_REG_DIV_CLOCK_OUTPUT_ENABLE);
+			}
+			break;
+		case chipcHw_OPTYPE_BYPASS:
+			if (mode) {
+				reg32_modify_or(pClockCtrl,
+						chipcHw_REG_DIV_CLOCK_BYPASS_SELECT);
+			} else {
+				reg32_modify_and(pClockCtrl,
+						 ~chipcHw_REG_DIV_CLOCK_BYPASS_SELECT);
+			}
+			break;
+		}
+	}
+}
+
+/****************************************************************************/
+/**
+*  @brief   Disables a core clock of a certain device
+*
+*  This function disables a core clock
+*
+*  @note    no change in power consumption
+*/
+/****************************************************************************/
+static inline void chipcHw_setClockDisable(chipcHw_CLOCK_e clock)
+{
+
+	/* Disable output of the clock */
+	chipcHw_setClock(clock, chipcHw_OPTYPE_OUTPUT, 0);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Enable a core clock of a certain device
+*
+*  This function enables a core clock
+*
+*  @note    no change in power consumption
+*/
+/****************************************************************************/
+static inline void chipcHw_setClockEnable(chipcHw_CLOCK_e clock)
+{
+
+	/* Enable output of the clock */
+	chipcHw_setClock(clock, chipcHw_OPTYPE_OUTPUT, 1);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Enables bypass clock of a certain device
+*
+*  This function enables bypass clock
+*
+*  @note    Doesnot affect the bus interface clock
+*/
+/****************************************************************************/
+static inline void chipcHw_bypassClockEnable(chipcHw_CLOCK_e clock)
+{
+	/* Enable bypass clock */
+	chipcHw_setClock(clock, chipcHw_OPTYPE_BYPASS, 1);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Disabled bypass clock of a certain device
+*
+*  This function disables bypass clock
+*
+*  @note    Doesnot affect the bus interface clock
+*/
+/****************************************************************************/
+static inline void chipcHw_bypassClockDisable(chipcHw_CLOCK_e clock)
+{
+	/* Disable bypass clock */
+	chipcHw_setClock(clock, chipcHw_OPTYPE_BYPASS, 0);
+
+}
+
+/****************************************************************************/
+/**  @brief Checks if software strap is enabled
+ *
+ *   @return 1 : When enable
+ *           0 : When disable
+ */
+/****************************************************************************/
+static inline int chipcHw_isSoftwareStrapsEnable(void)
+{
+	return pChipcHw->SoftStraps & 0x00000001;
+}
+
+/****************************************************************************/
+/**  @brief Enable software strap
+ */
+/****************************************************************************/
+static inline void chipcHw_softwareStrapsEnable(void)
+{
+	reg32_modify_or(&pChipcHw->SoftStraps, 0x00000001);
+}
+
+/****************************************************************************/
+/**  @brief Disable software strap
+ */
+/****************************************************************************/
+static inline void chipcHw_softwareStrapsDisable(void)
+{
+	reg32_modify_and(&pChipcHw->SoftStraps, (~0x00000001));
+}
+
+/****************************************************************************/
+/**  @brief PLL test enable
+ */
+/****************************************************************************/
+static inline void chipcHw_pllTestEnable(void)
+{
+	reg32_modify_or(&pChipcHw->PLLConfig,
+			chipcHw_REG_PLL_CONFIG_TEST_ENABLE);
+}
+
+/****************************************************************************/
+/**  @brief PLL2 test enable
+ */
+/****************************************************************************/
+static inline void chipcHw_pll2TestEnable(void)
+{
+	reg32_modify_or(&pChipcHw->PLLConfig2,
+			chipcHw_REG_PLL_CONFIG_TEST_ENABLE);
+}
+
+/****************************************************************************/
+/**  @brief PLL test disable
+ */
+/****************************************************************************/
+static inline void chipcHw_pllTestDisable(void)
+{
+	reg32_modify_and(&pChipcHw->PLLConfig,
+			 ~chipcHw_REG_PLL_CONFIG_TEST_ENABLE);
+}
+
+/****************************************************************************/
+/**  @brief PLL2 test disable
+ */
+/****************************************************************************/
+static inline void chipcHw_pll2TestDisable(void)
+{
+	reg32_modify_and(&pChipcHw->PLLConfig2,
+			 ~chipcHw_REG_PLL_CONFIG_TEST_ENABLE);
+}
+
+/****************************************************************************/
+/**  @brief Get PLL test status
+ */
+/****************************************************************************/
+static inline int chipcHw_isPllTestEnable(void)
+{
+	return pChipcHw->PLLConfig & chipcHw_REG_PLL_CONFIG_TEST_ENABLE;
+}
+
+/****************************************************************************/
+/**  @brief Get PLL2 test status
+ */
+/****************************************************************************/
+static inline int chipcHw_isPll2TestEnable(void)
+{
+	return pChipcHw->PLLConfig2 & chipcHw_REG_PLL_CONFIG_TEST_ENABLE;
+}
+
+/****************************************************************************/
+/**  @brief PLL test select
+ */
+/****************************************************************************/
+static inline void chipcHw_pllTestSelect(uint32_t val)
+{
+	REG_LOCAL_IRQ_SAVE;
+	pChipcHw->PLLConfig &= ~chipcHw_REG_PLL_CONFIG_TEST_SELECT_MASK;
+	pChipcHw->PLLConfig |=
+	    (val) << chipcHw_REG_PLL_CONFIG_TEST_SELECT_SHIFT;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**  @brief PLL2 test select
+ */
+/****************************************************************************/
+static inline void chipcHw_pll2TestSelect(uint32_t val)
+{
+
+	REG_LOCAL_IRQ_SAVE;
+	pChipcHw->PLLConfig2 &= ~chipcHw_REG_PLL_CONFIG_TEST_SELECT_MASK;
+	pChipcHw->PLLConfig2 |=
+	    (val) << chipcHw_REG_PLL_CONFIG_TEST_SELECT_SHIFT;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**  @brief Get PLL test selected option
+ */
+/****************************************************************************/
+static inline uint8_t chipcHw_getPllTestSelected(void)
+{
+	return (uint8_t) ((pChipcHw->
+			   PLLConfig & chipcHw_REG_PLL_CONFIG_TEST_SELECT_MASK)
+			  >> chipcHw_REG_PLL_CONFIG_TEST_SELECT_SHIFT);
+}
+
+/****************************************************************************/
+/**  @brief Get PLL2 test selected option
+ */
+/****************************************************************************/
+static inline uint8_t chipcHw_getPll2TestSelected(void)
+{
+	return (uint8_t) ((pChipcHw->
+			   PLLConfig2 & chipcHw_REG_PLL_CONFIG_TEST_SELECT_MASK)
+			  >> chipcHw_REG_PLL_CONFIG_TEST_SELECT_SHIFT);
+}
+
+/****************************************************************************/
+/**
+*  @brief  Disable the PLL1
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_pll1Disable(void)
+{
+	REG_LOCAL_IRQ_SAVE;
+	pChipcHw->PLLConfig |= chipcHw_REG_PLL_CONFIG_POWER_DOWN;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief  Disable the PLL2
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_pll2Disable(void)
+{
+	REG_LOCAL_IRQ_SAVE;
+	pChipcHw->PLLConfig2 |= chipcHw_REG_PLL_CONFIG_POWER_DOWN;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Enables DDR SW phase alignment interrupt
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrPhaseAlignInterruptEnable(void)
+{
+	REG_LOCAL_IRQ_SAVE;
+	pChipcHw->Spare1 |= chipcHw_REG_SPARE1_DDR_PHASE_INTR_ENABLE;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Disables DDR SW phase alignment interrupt
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrPhaseAlignInterruptDisable(void)
+{
+	REG_LOCAL_IRQ_SAVE;
+	pChipcHw->Spare1 &= ~chipcHw_REG_SPARE1_DDR_PHASE_INTR_ENABLE;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Set VPM SW phase alignment interrupt mode
+*
+*  This function sets VPM phase alignment interrupt
+*/
+/****************************************************************************/
+static inline void
+chipcHw_vpmPhaseAlignInterruptMode(chipcHw_VPM_HW_PHASE_INTR_e mode)
+{
+	REG_LOCAL_IRQ_SAVE;
+	if (mode == chipcHw_VPM_HW_PHASE_INTR_DISABLE) {
+		pChipcHw->Spare1 &= ~chipcHw_REG_SPARE1_VPM_PHASE_INTR_ENABLE;
+	} else {
+		pChipcHw->Spare1 |= chipcHw_REG_SPARE1_VPM_PHASE_INTR_ENABLE;
+	}
+	pChipcHw->VPMPhaseCtrl2 =
+	    (pChipcHw->
+	     VPMPhaseCtrl2 & ~(chipcHw_REG_VPM_INTR_SELECT_MASK <<
+			       chipcHw_REG_VPM_INTR_SELECT_SHIFT)) | mode;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Enable DDR phase alignment in software
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrSwPhaseAlignEnable(void)
+{
+	REG_LOCAL_IRQ_SAVE;
+	pChipcHw->DDRPhaseCtrl1 |= chipcHw_REG_DDR_SW_PHASE_CTRL_ENABLE;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Disable DDR phase alignment in software
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrSwPhaseAlignDisable(void)
+{
+	REG_LOCAL_IRQ_SAVE;
+	pChipcHw->DDRPhaseCtrl1 &= ~chipcHw_REG_DDR_SW_PHASE_CTRL_ENABLE;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Enable DDR phase alignment in hardware
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrHwPhaseAlignEnable(void)
+{
+	REG_LOCAL_IRQ_SAVE;
+	pChipcHw->DDRPhaseCtrl1 |= chipcHw_REG_DDR_HW_PHASE_CTRL_ENABLE;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Disable DDR phase alignment in hardware
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrHwPhaseAlignDisable(void)
+{
+	REG_LOCAL_IRQ_SAVE;
+	pChipcHw->DDRPhaseCtrl1 &= ~chipcHw_REG_DDR_HW_PHASE_CTRL_ENABLE;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Enable VPM phase alignment in software
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmSwPhaseAlignEnable(void)
+{
+	REG_LOCAL_IRQ_SAVE;
+	pChipcHw->VPMPhaseCtrl1 |= chipcHw_REG_VPM_SW_PHASE_CTRL_ENABLE;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Disable VPM phase alignment in software
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmSwPhaseAlignDisable(void)
+{
+	REG_LOCAL_IRQ_SAVE;
+	pChipcHw->VPMPhaseCtrl1 &= ~chipcHw_REG_VPM_SW_PHASE_CTRL_ENABLE;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Enable VPM phase alignment in hardware
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmHwPhaseAlignEnable(void)
+{
+	REG_LOCAL_IRQ_SAVE;
+	pChipcHw->VPMPhaseCtrl1 |= chipcHw_REG_VPM_HW_PHASE_CTRL_ENABLE;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Disable VPM phase alignment in hardware
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmHwPhaseAlignDisable(void)
+{
+	REG_LOCAL_IRQ_SAVE;
+	pChipcHw->VPMPhaseCtrl1 &= ~chipcHw_REG_VPM_HW_PHASE_CTRL_ENABLE;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Set DDR phase alignment margin in hardware
+*
+*/
+/****************************************************************************/
+static inline void
+chipcHw_setDdrHwPhaseAlignMargin(chipcHw_DDR_HW_PHASE_MARGIN_e margin)
+{
+	uint32_t ge = 0;
+	uint32_t le = 0;
+
+	switch (margin) {
+	case chipcHw_DDR_HW_PHASE_MARGIN_STRICT:
+		ge = 0x0F;
+		le = 0x0F;
+		break;
+	case chipcHw_DDR_HW_PHASE_MARGIN_MEDIUM:
+		ge = 0x03;
+		le = 0x3F;
+		break;
+	case chipcHw_DDR_HW_PHASE_MARGIN_WIDE:
+		ge = 0x01;
+		le = 0x7F;
+		break;
+	}
+
+	{
+		REG_LOCAL_IRQ_SAVE;
+
+		pChipcHw->DDRPhaseCtrl1 &=
+		    ~((chipcHw_REG_DDR_PHASE_VALUE_GE_MASK <<
+		       chipcHw_REG_DDR_PHASE_VALUE_GE_SHIFT)
+		      || (chipcHw_REG_DDR_PHASE_VALUE_LE_MASK <<
+			  chipcHw_REG_DDR_PHASE_VALUE_LE_SHIFT));
+
+		pChipcHw->DDRPhaseCtrl1 |=
+		    ((ge << chipcHw_REG_DDR_PHASE_VALUE_GE_SHIFT)
+		     || (le << chipcHw_REG_DDR_PHASE_VALUE_LE_SHIFT));
+
+		REG_LOCAL_IRQ_RESTORE;
+	}
+}
+
+/****************************************************************************/
+/**
+*  @brief   Set VPM phase alignment margin in hardware
+*
+*/
+/****************************************************************************/
+static inline void
+chipcHw_setVpmHwPhaseAlignMargin(chipcHw_VPM_HW_PHASE_MARGIN_e margin)
+{
+	uint32_t ge = 0;
+	uint32_t le = 0;
+
+	switch (margin) {
+	case chipcHw_VPM_HW_PHASE_MARGIN_STRICT:
+		ge = 0x0F;
+		le = 0x0F;
+		break;
+	case chipcHw_VPM_HW_PHASE_MARGIN_MEDIUM:
+		ge = 0x03;
+		le = 0x3F;
+		break;
+	case chipcHw_VPM_HW_PHASE_MARGIN_WIDE:
+		ge = 0x01;
+		le = 0x7F;
+		break;
+	}
+
+	{
+		REG_LOCAL_IRQ_SAVE;
+
+		pChipcHw->VPMPhaseCtrl1 &=
+		    ~((chipcHw_REG_VPM_PHASE_VALUE_GE_MASK <<
+		       chipcHw_REG_VPM_PHASE_VALUE_GE_SHIFT)
+		      || (chipcHw_REG_VPM_PHASE_VALUE_LE_MASK <<
+			  chipcHw_REG_VPM_PHASE_VALUE_LE_SHIFT));
+
+		pChipcHw->VPMPhaseCtrl1 |=
+		    ((ge << chipcHw_REG_VPM_PHASE_VALUE_GE_SHIFT)
+		     || (le << chipcHw_REG_VPM_PHASE_VALUE_LE_SHIFT));
+
+		REG_LOCAL_IRQ_RESTORE;
+	}
+}
+
+/****************************************************************************/
+/**
+*  @brief   Checks DDR phase aligned status done by HW
+*
+*  @return  1: When aligned
+*           0: When not aligned
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_isDdrHwPhaseAligned(void)
+{
+	return (pChipcHw->
+		PhaseAlignStatus & chipcHw_REG_DDR_PHASE_ALIGNED) ? 1 : 0;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Checks VPM phase aligned status done by HW
+*
+*  @return  1: When aligned
+*           0: When not aligned
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_isVpmHwPhaseAligned(void)
+{
+	return (pChipcHw->
+		PhaseAlignStatus & chipcHw_REG_VPM_PHASE_ALIGNED) ? 1 : 0;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Get DDR phase aligned status done by HW
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getDdrHwPhaseAlignStatus(void)
+{
+	return (pChipcHw->
+		PhaseAlignStatus & chipcHw_REG_DDR_PHASE_STATUS_MASK) >>
+	    chipcHw_REG_DDR_PHASE_STATUS_SHIFT;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Get VPM phase aligned status done by HW
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getVpmHwPhaseAlignStatus(void)
+{
+	return (pChipcHw->
+		PhaseAlignStatus & chipcHw_REG_VPM_PHASE_STATUS_MASK) >>
+	    chipcHw_REG_VPM_PHASE_STATUS_SHIFT;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Get DDR phase control value
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getDdrPhaseControl(void)
+{
+	return (pChipcHw->
+		PhaseAlignStatus & chipcHw_REG_DDR_PHASE_CTRL_MASK) >>
+	    chipcHw_REG_DDR_PHASE_CTRL_SHIFT;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Get VPM phase control value
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getVpmPhaseControl(void)
+{
+	return (pChipcHw->
+		PhaseAlignStatus & chipcHw_REG_VPM_PHASE_CTRL_MASK) >>
+	    chipcHw_REG_VPM_PHASE_CTRL_SHIFT;
+}
+
+/****************************************************************************/
+/**
+*  @brief   DDR phase alignment timeout count
+*
+*  @note    If HW fails to perform the phase alignment, it will trigger
+*           a DDR phase alignment timeout interrupt.
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrHwPhaseAlignTimeout(uint32_t busCycle)
+{
+	REG_LOCAL_IRQ_SAVE;
+	pChipcHw->DDRPhaseCtrl2 &=
+	    ~(chipcHw_REG_DDR_PHASE_TIMEOUT_COUNT_MASK <<
+	      chipcHw_REG_DDR_PHASE_TIMEOUT_COUNT_SHIFT);
+	pChipcHw->DDRPhaseCtrl2 |=
+	    (busCycle & chipcHw_REG_DDR_PHASE_TIMEOUT_COUNT_MASK) <<
+	    chipcHw_REG_DDR_PHASE_TIMEOUT_COUNT_SHIFT;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   VPM phase alignment timeout count
+*
+*  @note    If HW fails to perform the phase alignment, it will trigger
+*           a VPM phase alignment timeout interrupt.
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmHwPhaseAlignTimeout(uint32_t busCycle)
+{
+	REG_LOCAL_IRQ_SAVE;
+	pChipcHw->VPMPhaseCtrl2 &=
+	    ~(chipcHw_REG_VPM_PHASE_TIMEOUT_COUNT_MASK <<
+	      chipcHw_REG_VPM_PHASE_TIMEOUT_COUNT_SHIFT);
+	pChipcHw->VPMPhaseCtrl2 |=
+	    (busCycle & chipcHw_REG_VPM_PHASE_TIMEOUT_COUNT_MASK) <<
+	    chipcHw_REG_VPM_PHASE_TIMEOUT_COUNT_SHIFT;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Clear DDR phase alignment timeout interrupt
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrHwPhaseAlignTimeoutInterruptClear(void)
+{
+	REG_LOCAL_IRQ_SAVE;
+	/* Clear timeout interrupt service bit */
+	pChipcHw->DDRPhaseCtrl2 |= chipcHw_REG_DDR_INTR_SERVICED;
+	pChipcHw->DDRPhaseCtrl2 &= ~chipcHw_REG_DDR_INTR_SERVICED;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Clear VPM phase alignment timeout interrupt
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmHwPhaseAlignTimeoutInterruptClear(void)
+{
+	REG_LOCAL_IRQ_SAVE;
+	/* Clear timeout interrupt service bit */
+	pChipcHw->VPMPhaseCtrl2 |= chipcHw_REG_VPM_INTR_SERVICED;
+	pChipcHw->VPMPhaseCtrl2 &= ~chipcHw_REG_VPM_INTR_SERVICED;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   DDR phase alignment timeout interrupt enable
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrHwPhaseAlignTimeoutInterruptEnable(void)
+{
+	REG_LOCAL_IRQ_SAVE;
+	chipcHw_ddrHwPhaseAlignTimeoutInterruptClear();	/* Recommended */
+	/* Enable timeout interrupt */
+	pChipcHw->DDRPhaseCtrl2 |= chipcHw_REG_DDR_TIMEOUT_INTR_ENABLE;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   VPM phase alignment timeout interrupt enable
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmHwPhaseAlignTimeoutInterruptEnable(void)
+{
+	REG_LOCAL_IRQ_SAVE;
+	chipcHw_vpmHwPhaseAlignTimeoutInterruptClear();	/* Recommended */
+	/* Enable timeout interrupt */
+	pChipcHw->VPMPhaseCtrl2 |= chipcHw_REG_VPM_TIMEOUT_INTR_ENABLE;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   DDR phase alignment timeout interrupt disable
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrHwPhaseAlignTimeoutInterruptDisable(void)
+{
+	REG_LOCAL_IRQ_SAVE;
+	pChipcHw->DDRPhaseCtrl2 &= ~chipcHw_REG_DDR_TIMEOUT_INTR_ENABLE;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   VPM phase alignment timeout interrupt disable
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmHwPhaseAlignTimeoutInterruptDisable(void)
+{
+	REG_LOCAL_IRQ_SAVE;
+	pChipcHw->VPMPhaseCtrl2 &= ~chipcHw_REG_VPM_TIMEOUT_INTR_ENABLE;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+#endif /* CHIPC_INLINE_H */
diff --git a/arch/arm/mach-bcmring/include/mach/csp/chipcHw_reg.h b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_reg.h
new file mode 100644
index 000000000000..b162448f613c
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_reg.h
@@ -0,0 +1,530 @@
+/*****************************************************************************
+* Copyright 2004 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*  @file    chipcHw_reg.h
+*
+*  @brief   Definitions for low level chip control registers
+*
+*/
+/****************************************************************************/
+#ifndef CHIPCHW_REG_H
+#define CHIPCHW_REG_H
+
+#include <mach/csp/mm_io.h>
+#include <csp/reg.h>
+#include <mach/csp/ddrcReg.h>
+
+#define chipcHw_BASE_ADDRESS    MM_IO_BASE_CHIPC
+
+typedef struct {
+	uint32_t ChipId;	/* Chip ID */
+	uint32_t DDRClock;	/* PLL1 Channel 1 for DDR clock */
+	uint32_t ARMClock;	/* PLL1 Channel 2 for ARM clock */
+	uint32_t ESWClock;	/* PLL1 Channel 3 for ESW system clock */
+	uint32_t VPMClock;	/* PLL1 Channel 4 for VPM clock */
+	uint32_t ESW125Clock;	/* PLL1 Channel 5 for ESW 125MHz clock */
+	uint32_t UARTClock;	/* PLL1 Channel 6 for UART clock */
+	uint32_t SDIO0Clock;	/* PLL1 Channel 7 for SDIO 0 clock */
+	uint32_t SDIO1Clock;	/* PLL1 Channel 8 for SDIO 1 clock */
+	uint32_t SPIClock;	/* PLL1 Channel 9 for SPI master Clock  */
+	uint32_t ETMClock;	/* PLL1 Channel 10 for ARM ETM Clock  */
+
+	uint32_t ACLKClock;	/* ACLK Clock (Divider) */
+	uint32_t OTPClock;	/* OTP Clock  (Divider) */
+	uint32_t I2CClock;	/* I2C Clock (CK_13m) (Divider) */
+	uint32_t I2S0Clock;	/* I2S0 Clock (Divider) */
+	uint32_t RTBUSClock;	/* RTBUS (DDR PHY Config.) Clock (Divider) */
+	uint32_t pad1;
+	uint32_t APM100Clock;	/* APM 100MHz CLK Clock (Divider) */
+	uint32_t TSCClock;	/* TSC Clock (Divider) */
+	uint32_t LEDClock;	/* LED Clock (Divider) */
+
+	uint32_t USBClock;	/* PLL2 Channel 1 for USB clock */
+	uint32_t LCDClock;	/* PLL2 Channel 2 for LCD clock */
+	uint32_t APMClock;	/* PLL2 Channel 3 for APM 200 MHz clock */
+
+	uint32_t BusIntfClock;	/* Bus interface clock */
+
+	uint32_t PLLStatus;	/* PLL status register (PLL1) */
+	uint32_t PLLConfig;	/* PLL configuration register  (PLL1) */
+	uint32_t PLLPreDivider;	/* PLL pre-divider control register (PLL1) */
+	uint32_t PLLDivider;	/* PLL divider control register (PLL1) */
+	uint32_t PLLControl1;	/* PLL analog control register #1 (PLL1) */
+	uint32_t PLLControl2;	/* PLL analog control register #2 (PLL1) */
+
+	uint32_t I2S1Clock;	/* I2S1 Clock  */
+	uint32_t AudioEnable;	/* Enable/ disable audio channel */
+	uint32_t SoftReset1;	/* Reset blocks */
+	uint32_t SoftReset2;	/* Reset blocks */
+	uint32_t Spare1;	/* Phase align interrupts */
+	uint32_t Sticky;	/* Sticky bits */
+	uint32_t MiscCtrl;	/* Misc. control */
+	uint32_t pad3[3];
+
+	uint32_t PLLStatus2;	/* PLL status register (PLL2) */
+	uint32_t PLLConfig2;	/* PLL configuration register  (PLL2) */
+	uint32_t PLLPreDivider2;	/* PLL pre-divider control register (PLL2) */
+	uint32_t PLLDivider2;	/* PLL divider control register (PLL2) */
+	uint32_t PLLControl12;	/* PLL analog control register #1 (PLL2) */
+	uint32_t PLLControl22;	/* PLL analog control register #2 (PLL2) */
+
+	uint32_t DDRPhaseCtrl1;	/* DDR Clock Phase Alignment control1 */
+	uint32_t VPMPhaseCtrl1;	/* VPM Clock Phase Alignment control1 */
+	uint32_t PhaseAlignStatus;	/* DDR/VPM Clock Phase Alignment Status */
+	uint32_t PhaseCtrlStatus;	/* DDR/VPM Clock HW DDR/VPM ph_ctrl and load_ch Status */
+	uint32_t DDRPhaseCtrl2;	/* DDR Clock Phase Alignment control2 */
+	uint32_t VPMPhaseCtrl2;	/* VPM Clock Phase Alignment control2 */
+	uint32_t pad4[9];
+
+	uint32_t SoftOTP1;	/* Software OTP control */
+	uint32_t SoftOTP2;	/* Software OTP control */
+	uint32_t SoftStraps;	/* Software strap */
+	uint32_t PinStraps;	/* Pin Straps */
+	uint32_t DiffOscCtrl;	/* Diff oscillator control */
+	uint32_t DiagsCtrl;	/* Diagnostic control */
+	uint32_t DiagsOutputCtrl;	/* Diagnostic output enable */
+	uint32_t DiagsReadBackCtrl;	/* Diagnostic read back control */
+
+	uint32_t LcdPifMode;	/* LCD/PIF Pin Sharing MUX Mode */
+
+	uint32_t GpioMux_0_7;	/* Pin Sharing MUX0 Control */
+	uint32_t GpioMux_8_15;	/* Pin Sharing MUX1 Control */
+	uint32_t GpioMux_16_23;	/* Pin Sharing MUX2 Control */
+	uint32_t GpioMux_24_31;	/* Pin Sharing MUX3 Control */
+	uint32_t GpioMux_32_39;	/* Pin Sharing MUX4 Control */
+	uint32_t GpioMux_40_47;	/* Pin Sharing MUX5 Control */
+	uint32_t GpioMux_48_55;	/* Pin Sharing MUX6 Control */
+	uint32_t GpioMux_56_63;	/* Pin Sharing MUX7 Control */
+
+	uint32_t GpioSR_0_7;	/* Slew rate for GPIO 0 - 7 */
+	uint32_t GpioSR_8_15;	/* Slew rate for GPIO 8 - 15 */
+	uint32_t GpioSR_16_23;	/* Slew rate for GPIO 16 - 23 */
+	uint32_t GpioSR_24_31;	/* Slew rate for GPIO 24 - 31 */
+	uint32_t GpioSR_32_39;	/* Slew rate for GPIO 32 - 39 */
+	uint32_t GpioSR_40_47;	/* Slew rate for GPIO 40 - 47 */
+	uint32_t GpioSR_48_55;	/* Slew rate for GPIO 48 - 55 */
+	uint32_t GpioSR_56_63;	/* Slew rate for GPIO 56 - 63 */
+	uint32_t MiscSR_0_7;	/* Slew rate for MISC 0 - 7 */
+	uint32_t MiscSR_8_15;	/* Slew rate for MISC 8 - 15 */
+
+	uint32_t GpioPull_0_15;	/* Pull up registers for GPIO 0 - 15 */
+	uint32_t GpioPull_16_31;	/* Pull up registers for GPIO 16 - 31 */
+	uint32_t GpioPull_32_47;	/* Pull up registers for GPIO 32 - 47 */
+	uint32_t GpioPull_48_63;	/* Pull up registers for GPIO 48 - 63 */
+	uint32_t MiscPull_0_15;	/* Pull up registers for MISC 0 - 15 */
+
+	uint32_t GpioInput_0_31;	/* Input type for GPIO 0 - 31 */
+	uint32_t GpioInput_32_63;	/* Input type for GPIO 32 - 63 */
+	uint32_t MiscInput_0_15;	/* Input type for MISC 0 - 16 */
+} chipcHw_REG_t;
+
+#define pChipcHw  ((volatile chipcHw_REG_t *) chipcHw_BASE_ADDRESS)
+#define pChipcPhysical  ((volatile chipcHw_REG_t *) MM_ADDR_IO_CHIPC)
+
+#define chipcHw_REG_CHIPID_BASE_MASK                    0xFFFFF000
+#define chipcHw_REG_CHIPID_BASE_SHIFT                   12
+#define chipcHw_REG_CHIPID_REV_MASK                     0x00000FFF
+#define chipcHw_REG_REV_A0                              0xA00
+#define chipcHw_REG_REV_B0                              0x0B0
+
+#define chipcHw_REG_PLL_STATUS_CONTROL_ENABLE           0x80000000	/* Allow controlling PLL registers */
+#define chipcHw_REG_PLL_STATUS_LOCKED                   0x00000001	/* PLL is settled */
+#define chipcHw_REG_PLL_CONFIG_D_RESET                  0x00000008	/* Digital reset */
+#define chipcHw_REG_PLL_CONFIG_A_RESET                  0x00000004	/* Analog reset */
+#define chipcHw_REG_PLL_CONFIG_BYPASS_ENABLE            0x00000020	/* Bypass enable */
+#define chipcHw_REG_PLL_CONFIG_OUTPUT_ENABLE            0x00000010	/* Output enable */
+#define chipcHw_REG_PLL_CONFIG_POWER_DOWN               0x00000001	/* Power down */
+#define chipcHw_REG_PLL_CONFIG_VCO_SPLIT_FREQ           1600000000	/* 1.6GHz VCO split frequency */
+#define chipcHw_REG_PLL_CONFIG_VCO_800_1600             0x00000000	/* VCO range 800-1600 MHz */
+#define chipcHw_REG_PLL_CONFIG_VCO_1601_3200            0x00000080	/* VCO range 1601-3200 MHz */
+#define chipcHw_REG_PLL_CONFIG_TEST_ENABLE              0x00010000	/* PLL test output enable */
+#define chipcHw_REG_PLL_CONFIG_TEST_SELECT_MASK         0x003E0000	/* Mask to set test values */
+#define chipcHw_REG_PLL_CONFIG_TEST_SELECT_SHIFT        17
+
+#define chipcHw_REG_PLL_CLOCK_PHASE_COMP                0x00800000	/* Phase comparator output */
+#define chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_MASK         0x00300000	/* Clock to bus ratio mask */
+#define chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_SHIFT        20	/* Number of bits to be shifted */
+#define chipcHw_REG_PLL_CLOCK_POWER_DOWN                0x00080000	/* PLL channel power down */
+#define chipcHw_REG_PLL_CLOCK_SOURCE_GPIO               0x00040000	/* Use GPIO as source */
+#define chipcHw_REG_PLL_CLOCK_BYPASS_SELECT             0x00020000	/* Select bypass clock */
+#define chipcHw_REG_PLL_CLOCK_OUTPUT_ENABLE             0x00010000	/* Clock gated ON */
+#define chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE       0x00008000	/* Clock phase update enable */
+#define chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT       8	/* Number of bits to be shifted */
+#define chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK        0x00003F00	/* Phase control mask */
+#define chipcHw_REG_PLL_CLOCK_MDIV_MASK                 0x000000FF	/* Clock post divider mask
+
+									   00000000 = divide-by-256
+									   00000001 = divide-by-1
+									   00000010 = divide-by-2
+									   00000011 = divide-by-3
+									   00000100 = divide-by-4
+									   00000101 = divide-by-5
+									   00000110 = divide-by-6
+									   .
+									   .
+									   11111011 = divide-by-251
+									   11111100 = divide-by-252
+									   11111101 = divide-by-253
+									   11111110 = divide-by-254
+									 */
+
+#define chipcHw_REG_DIV_CLOCK_SOURCE_OTHER              0x00040000	/* NON-PLL clock source select */
+#define chipcHw_REG_DIV_CLOCK_BYPASS_SELECT             0x00020000	/* NON-PLL clock bypass enable */
+#define chipcHw_REG_DIV_CLOCK_OUTPUT_ENABLE             0x00010000	/* NON-PLL clock output enable */
+#define chipcHw_REG_DIV_CLOCK_DIV_MASK                  0x000000FF	/* NON-PLL clock post-divide mask */
+#define chipcHw_REG_DIV_CLOCK_DIV_256                   0x00000000	/* NON-PLL clock post-divide by 256 */
+
+#define chipcHw_REG_PLL_PREDIVIDER_P1_SHIFT             0
+#define chipcHw_REG_PLL_PREDIVIDER_P2_SHIFT             4
+#define chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT           8
+#define chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK            0x0001FF00
+#define chipcHw_REG_PLL_PREDIVIDER_POWER_DOWN           0x02000000
+#define chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASK       0x00700000	/* Divider mask */
+#define chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER    0x00000000	/* Integer-N Mode */
+#define chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASH_UNIT  0x00100000	/* MASH Sigma-Delta Modulator Unit Mode */
+#define chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MFB_UNIT   0x00200000	/* MFB Sigma-Delta Modulator Unit Mode */
+#define chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASH_1_8   0x00300000	/* MASH Sigma-Delta Modulator 1/8 Mode */
+#define chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MFB_1_8    0x00400000	/* MFB Sigma-Delta Modulator 1/8 Mode */
+
+#define chipcHw_REG_PLL_PREDIVIDER_NDIV_i(vco)          ((vco) / chipcHw_XTAL_FREQ_Hz)
+#define chipcHw_REG_PLL_PREDIVIDER_P1                   1
+#define chipcHw_REG_PLL_PREDIVIDER_P2                   1
+
+#define chipcHw_REG_PLL_DIVIDER_M1DIV                   0x03000000
+#define chipcHw_REG_PLL_DIVIDER_FRAC                    0x00FFFFFF	/* Fractional divider */
+
+#define chipcHw_REG_PLL_DIVIDER_NDIV_f_SS               (0x00FFFFFF)	/* To attain spread with max frequency */
+
+#define chipcHw_REG_PLL_DIVIDER_NDIV_f                  0	/* ndiv_frac = chipcHw_REG_PLL_DIVIDER_NDIV_f /
+								   chipcHw_REG_PLL_DIVIDER_FRAC
+								   = 0, when SS is disable
+								 */
+
+#define chipcHw_REG_PLL_DIVIDER_MDIV(vco, Hz)           ((chipcHw_divide((vco), (Hz)) > 255) ? 0 : chipcHw_divide((vco), (Hz)))
+
+#define chipcHw_REG_ACLKClock_CLK_DIV_MASK              0x3
+
+/* System booting strap options */
+#define chipcHw_STRAPS_SOFT_OVERRIDE                    0x00000001	/* Software Strap Override */
+
+#define chipcHw_STRAPS_BOOT_DEVICE_NAND_FLASH_8         0x00000000	/* 8 bit NAND FLASH Boot */
+#define chipcHw_STRAPS_BOOT_DEVICE_NOR_FLASH_16         0x00000002	/* 16 bit NOR FLASH Boot */
+#define chipcHw_STRAPS_BOOT_DEVICE_SERIAL_FLASH         0x00000004	/* Serial FLASH Boot */
+#define chipcHw_STRAPS_BOOT_DEVICE_NAND_FLASH_16        0x00000006	/* 16 bit NAND FLASH Boot */
+#define chipcHw_STRAPS_BOOT_DEVICE_UART                 0x00000008	/* UART Boot */
+#define chipcHw_STRAPS_BOOT_DEVICE_MASK                 0x0000000E	/* Mask */
+
+/* System boot option */
+#define chipcHw_STRAPS_BOOT_OPTION_BROM                 0x00000000	/* Boot from Boot ROM */
+#define chipcHw_STRAPS_BOOT_OPTION_ARAM                 0x00000020	/* Boot from ARAM */
+#define chipcHw_STRAPS_BOOT_OPTION_NOR                  0x00000030	/* Boot from NOR flash */
+
+/* NAND Flash page size strap options */
+#define chipcHw_STRAPS_NAND_PAGESIZE_512                0x00000000	/* NAND FLASH page size of 512 bytes */
+#define chipcHw_STRAPS_NAND_PAGESIZE_2048               0x00000040	/* NAND FLASH page size of 2048 bytes */
+#define chipcHw_STRAPS_NAND_PAGESIZE_4096               0x00000080	/* NAND FLASH page size of 4096 bytes */
+#define chipcHw_STRAPS_NAND_PAGESIZE_EXT                0x000000C0	/* NAND FLASH page of extened size */
+#define chipcHw_STRAPS_NAND_PAGESIZE_MASK               0x000000C0	/* Mask */
+
+#define chipcHw_STRAPS_NAND_EXTRA_CYCLE                 0x00000400	/* NAND FLASH address cycle configuration */
+#define chipcHw_STRAPS_REBOOT_TO_UART                   0x00000800	/* Reboot to UART on error */
+
+/* Secure boot mode strap options */
+#define chipcHw_STRAPS_BOOT_MODE_NORMAL                 0x00000000	/* Normal Boot */
+#define chipcHw_STRAPS_BOOT_MODE_DBG_SW                 0x00000100	/* Software debugging Boot */
+#define chipcHw_STRAPS_BOOT_MODE_DBG_BOOT               0x00000200	/* Boot rom debugging Boot */
+#define chipcHw_STRAPS_BOOT_MODE_NORMAL_QUIET           0x00000300	/* Normal Boot (Quiet BootRom) */
+#define chipcHw_STRAPS_BOOT_MODE_MASK                   0x00000300	/* Mask */
+
+/* Slave Mode straps */
+#define chipcHw_STRAPS_I2CS                             0x02000000	/* I2C Slave  */
+#define chipcHw_STRAPS_SPIS                             0x01000000	/* SPI Slave  */
+
+/* Strap pin options */
+#define chipcHw_REG_SW_STRAPS                           ((pChipcHw->PinStraps & 0x0000FC00) >> 10)
+
+/* PIF/LCD pin sharing defines */
+#define chipcHw_REG_LCD_PIN_ENABLE                      0x00000001	/* LCD Controller is used and the pins have LCD functions */
+#define chipcHw_REG_PIF_PIN_ENABLE                      0x00000002	/* LCD pins are used to perform PIF functions  */
+
+#define chipcHw_GPIO_COUNT                              61	/* Number of GPIO pin accessible thorugh CHIPC */
+
+/* NOTE: Any changes to these constants will require a corresponding change to chipcHw_str.c */
+#define chipcHw_REG_GPIO_MUX_KEYPAD                     0x00000001	/* GPIO mux for Keypad */
+#define chipcHw_REG_GPIO_MUX_I2CH                       0x00000002	/* GPIO mux for I2CH */
+#define chipcHw_REG_GPIO_MUX_SPI                        0x00000003	/* GPIO mux for SPI */
+#define chipcHw_REG_GPIO_MUX_UART                       0x00000004	/* GPIO mux for UART */
+#define chipcHw_REG_GPIO_MUX_LEDMTXP                    0x00000005	/* GPIO mux for LEDMTXP */
+#define chipcHw_REG_GPIO_MUX_LEDMTXS                    0x00000006	/* GPIO mux for LEDMTXS */
+#define chipcHw_REG_GPIO_MUX_SDIO0                      0x00000007	/* GPIO mux for SDIO0 */
+#define chipcHw_REG_GPIO_MUX_SDIO1                      0x00000008	/* GPIO mux for SDIO1 */
+#define chipcHw_REG_GPIO_MUX_PCM                        0x00000009	/* GPIO mux for PCM */
+#define chipcHw_REG_GPIO_MUX_I2S                        0x0000000A	/* GPIO mux for I2S */
+#define chipcHw_REG_GPIO_MUX_ETM                        0x0000000B	/* GPIO mux for ETM */
+#define chipcHw_REG_GPIO_MUX_DEBUG                      0x0000000C	/* GPIO mux for DEBUG */
+#define chipcHw_REG_GPIO_MUX_MISC                       0x0000000D	/* GPIO mux for MISC */
+#define chipcHw_REG_GPIO_MUX_GPIO                       0x00000000	/* GPIO mux for GPIO */
+#define chipcHw_REG_GPIO_MUX(pin)                       (&pChipcHw->GpioMux_0_7 + ((pin) >> 3))
+#define chipcHw_REG_GPIO_MUX_POSITION(pin)              (((pin) & 0x00000007) << 2)
+#define chipcHw_REG_GPIO_MUX_MASK                       0x0000000F	/* Mask */
+
+#define chipcHw_REG_SLEW_RATE_HIGH                      0x00000000	/* High speed slew rate */
+#define chipcHw_REG_SLEW_RATE_NORMAL                    0x00000008	/* Normal slew rate */
+							/* Pins beyond 42 are defined by skipping 8 bits within the register */
+#define chipcHw_REG_SLEW_RATE(pin)                      (((pin) > 42) ? (&pChipcHw->GpioSR_0_7 + (((pin) + 2) >> 3)) : (&pChipcHw->GpioSR_0_7 + ((pin) >> 3)))
+#define chipcHw_REG_SLEW_RATE_POSITION(pin)             (((pin) > 42) ? ((((pin) + 2) & 0x00000007) << 2) : (((pin) & 0x00000007) << 2))
+#define chipcHw_REG_SLEW_RATE_MASK                      0x00000008	/* Mask */
+
+#define chipcHw_REG_CURRENT_STRENGTH_2mA                0x00000001	/* Current driving strength 2 milli ampere */
+#define chipcHw_REG_CURRENT_STRENGTH_4mA                0x00000002	/* Current driving strength 4 milli ampere */
+#define chipcHw_REG_CURRENT_STRENGTH_6mA                0x00000004	/* Current driving strength 6 milli ampere */
+#define chipcHw_REG_CURRENT_STRENGTH_8mA                0x00000005	/* Current driving strength 8 milli ampere */
+#define chipcHw_REG_CURRENT_STRENGTH_10mA               0x00000006	/* Current driving strength 10 milli ampere */
+#define chipcHw_REG_CURRENT_STRENGTH_12mA               0x00000007	/* Current driving strength 12 milli ampere */
+#define chipcHw_REG_CURRENT_MASK                        0x00000007	/* Mask */
+							/* Pins beyond 42 are defined by skipping 8 bits */
+#define chipcHw_REG_CURRENT(pin)                        (((pin) > 42) ? (&pChipcHw->GpioSR_0_7 + (((pin) + 2) >> 3)) : (&pChipcHw->GpioSR_0_7 + ((pin) >> 3)))
+#define chipcHw_REG_CURRENT_POSITION(pin)               (((pin) > 42) ? ((((pin) + 2) & 0x00000007) << 2) : (((pin) & 0x00000007) << 2))
+
+#define chipcHw_REG_PULL_NONE                           0x00000000	/* No pull up register */
+#define chipcHw_REG_PULL_UP                             0x00000001	/* Pull up register enable */
+#define chipcHw_REG_PULL_DOWN                           0x00000002	/* Pull down register enable */
+#define chipcHw_REG_PULLUP_MASK                         0x00000003	/* Mask */
+							/* Pins beyond 42 are defined by skipping 4 bits */
+#define chipcHw_REG_PULLUP(pin)                         (((pin) > 42) ? (&pChipcHw->GpioPull_0_15 + (((pin) + 2) >> 4)) : (&pChipcHw->GpioPull_0_15 + ((pin) >> 4)))
+#define chipcHw_REG_PULLUP_POSITION(pin)                (((pin) > 42) ? ((((pin) + 2) & 0x0000000F) << 1) : (((pin) & 0x0000000F) << 1))
+
+#define chipcHw_REG_INPUTTYPE_CMOS                      0x00000000	/* Normal CMOS logic */
+#define chipcHw_REG_INPUTTYPE_ST                        0x00000001	/* High speed Schmitt Trigger */
+#define chipcHw_REG_INPUTTYPE_MASK                      0x00000001	/* Mask */
+							/* Pins beyond 42 are defined by skipping 2 bits */
+#define chipcHw_REG_INPUTTYPE(pin)                      (((pin) > 42) ? (&pChipcHw->GpioInput_0_31 + (((pin) + 2) >> 5)) : (&pChipcHw->GpioInput_0_31 + ((pin) >> 5)))
+#define chipcHw_REG_INPUTTYPE_POSITION(pin)             (((pin) > 42) ? ((((pin) + 2) & 0x0000001F)) : (((pin) & 0x0000001F)))
+
+/* Device connected to the bus clock */
+#define chipcHw_REG_BUS_CLOCK_ARM                       0x00000001	/* Bus interface clock for ARM */
+#define chipcHw_REG_BUS_CLOCK_VDEC                      0x00000002	/* Bus interface clock for VDEC */
+#define chipcHw_REG_BUS_CLOCK_ARAM                      0x00000004	/* Bus interface clock for ARAM */
+#define chipcHw_REG_BUS_CLOCK_HPM                       0x00000008	/* Bus interface clock for HPM */
+#define chipcHw_REG_BUS_CLOCK_DDRC                      0x00000010	/* Bus interface clock for DDRC */
+#define chipcHw_REG_BUS_CLOCK_DMAC0                     0x00000020	/* Bus interface clock for DMAC0 */
+#define chipcHw_REG_BUS_CLOCK_DMAC1                     0x00000040	/* Bus interface clock for DMAC1 */
+#define chipcHw_REG_BUS_CLOCK_NVI                       0x00000080	/* Bus interface clock for NVI */
+#define chipcHw_REG_BUS_CLOCK_ESW                       0x00000100	/* Bus interface clock for ESW */
+#define chipcHw_REG_BUS_CLOCK_GE                        0x00000200	/* Bus interface clock for GE */
+#define chipcHw_REG_BUS_CLOCK_I2CH                      0x00000400	/* Bus interface clock for I2CH */
+#define chipcHw_REG_BUS_CLOCK_I2S0                      0x00000800	/* Bus interface clock for I2S0 */
+#define chipcHw_REG_BUS_CLOCK_I2S1                      0x00001000	/* Bus interface clock for I2S1 */
+#define chipcHw_REG_BUS_CLOCK_VRAM                      0x00002000	/* Bus interface clock for VRAM */
+#define chipcHw_REG_BUS_CLOCK_CLCD                      0x00004000	/* Bus interface clock for CLCD */
+#define chipcHw_REG_BUS_CLOCK_LDK                       0x00008000	/* Bus interface clock for LDK */
+#define chipcHw_REG_BUS_CLOCK_LED                       0x00010000	/* Bus interface clock for LED */
+#define chipcHw_REG_BUS_CLOCK_OTP                       0x00020000	/* Bus interface clock for OTP */
+#define chipcHw_REG_BUS_CLOCK_PIF                       0x00040000	/* Bus interface clock for PIF */
+#define chipcHw_REG_BUS_CLOCK_SPU                       0x00080000	/* Bus interface clock for SPU */
+#define chipcHw_REG_BUS_CLOCK_SDIO0                     0x00100000	/* Bus interface clock for SDIO0 */
+#define chipcHw_REG_BUS_CLOCK_SDIO1                     0x00200000	/* Bus interface clock for SDIO1 */
+#define chipcHw_REG_BUS_CLOCK_SPIH                      0x00400000	/* Bus interface clock for SPIH */
+#define chipcHw_REG_BUS_CLOCK_SPIS                      0x00800000	/* Bus interface clock for SPIS */
+#define chipcHw_REG_BUS_CLOCK_UART0                     0x01000000	/* Bus interface clock for UART0 */
+#define chipcHw_REG_BUS_CLOCK_UART1                     0x02000000	/* Bus interface clock for UART1 */
+#define chipcHw_REG_BUS_CLOCK_BBL                       0x04000000	/* Bus interface clock for BBL */
+#define chipcHw_REG_BUS_CLOCK_I2CS                      0x08000000	/* Bus interface clock for I2CS */
+#define chipcHw_REG_BUS_CLOCK_USBH                      0x10000000	/* Bus interface clock for USB Host */
+#define chipcHw_REG_BUS_CLOCK_USBD                      0x20000000	/* Bus interface clock for USB Device */
+#define chipcHw_REG_BUS_CLOCK_BROM                      0x40000000	/* Bus interface clock for Boot ROM */
+#define chipcHw_REG_BUS_CLOCK_TSC                       0x80000000	/* Bus interface clock for Touch screen */
+
+/* Software resets defines */
+#define chipcHw_REG_SOFT_RESET_VPM_GLOBAL_HOLD          0x0000000080000000ULL	/* Reset Global VPM and hold */
+#define chipcHw_REG_SOFT_RESET_VPM_HOLD                 0x0000000040000000ULL	/* Reset VPM and hold */
+#define chipcHw_REG_SOFT_RESET_VPM_GLOBAL               0x0000000020000000ULL	/* Reset Global VPM */
+#define chipcHw_REG_SOFT_RESET_VPM                      0x0000000010000000ULL	/* Reset VPM */
+#define chipcHw_REG_SOFT_RESET_KEYPAD                   0x0000000008000000ULL	/* Reset Key pad */
+#define chipcHw_REG_SOFT_RESET_LED                      0x0000000004000000ULL	/* Reset LED */
+#define chipcHw_REG_SOFT_RESET_SPU                      0x0000000002000000ULL	/* Reset SPU */
+#define chipcHw_REG_SOFT_RESET_RNG                      0x0000000001000000ULL	/* Reset RNG */
+#define chipcHw_REG_SOFT_RESET_PKA                      0x0000000000800000ULL	/* Reset PKA */
+#define chipcHw_REG_SOFT_RESET_LCD                      0x0000000000400000ULL	/* Reset LCD */
+#define chipcHw_REG_SOFT_RESET_PIF                      0x0000000000200000ULL	/* Reset PIF */
+#define chipcHw_REG_SOFT_RESET_I2CS                     0x0000000000100000ULL	/* Reset I2C Slave */
+#define chipcHw_REG_SOFT_RESET_I2CH                     0x0000000000080000ULL	/* Reset I2C Host */
+#define chipcHw_REG_SOFT_RESET_SDIO1                    0x0000000000040000ULL	/* Reset SDIO 1 */
+#define chipcHw_REG_SOFT_RESET_SDIO0                    0x0000000000020000ULL	/* Reset SDIO 0 */
+#define chipcHw_REG_SOFT_RESET_BBL                      0x0000000000010000ULL	/* Reset BBL */
+#define chipcHw_REG_SOFT_RESET_I2S1                     0x0000000000008000ULL	/* Reset I2S1 */
+#define chipcHw_REG_SOFT_RESET_I2S0                     0x0000000000004000ULL	/* Reset I2S0 */
+#define chipcHw_REG_SOFT_RESET_SPIS                     0x0000000000002000ULL	/* Reset SPI Slave */
+#define chipcHw_REG_SOFT_RESET_SPIH                     0x0000000000001000ULL	/* Reset SPI Host */
+#define chipcHw_REG_SOFT_RESET_GPIO1                    0x0000000000000800ULL	/* Reset GPIO block 1 */
+#define chipcHw_REG_SOFT_RESET_GPIO0                    0x0000000000000400ULL	/* Reset GPIO block 0 */
+#define chipcHw_REG_SOFT_RESET_UART1                    0x0000000000000200ULL	/* Reset UART 1 */
+#define chipcHw_REG_SOFT_RESET_UART0                    0x0000000000000100ULL	/* Reset UART 0 */
+#define chipcHw_REG_SOFT_RESET_NVI                      0x0000000000000080ULL	/* Reset NVI */
+#define chipcHw_REG_SOFT_RESET_WDOG                     0x0000000000000040ULL	/* Reset Watch dog */
+#define chipcHw_REG_SOFT_RESET_TMR                      0x0000000000000020ULL	/* Reset Timer */
+#define chipcHw_REG_SOFT_RESET_ETM                      0x0000000000000010ULL	/* Reset ETM */
+#define chipcHw_REG_SOFT_RESET_ARM_HOLD                 0x0000000000000008ULL	/* Reset ARM and HOLD */
+#define chipcHw_REG_SOFT_RESET_ARM                      0x0000000000000004ULL	/* Reset ARM */
+#define chipcHw_REG_SOFT_RESET_CHIP_WARM                0x0000000000000002ULL	/* Chip warm reset */
+#define chipcHw_REG_SOFT_RESET_CHIP_SOFT                0x0000000000000001ULL	/* Chip soft reset */
+#define chipcHw_REG_SOFT_RESET_VDEC                     0x0000100000000000ULL	/* Video decoder */
+#define chipcHw_REG_SOFT_RESET_GE                       0x0000080000000000ULL	/* Graphics engine */
+#define chipcHw_REG_SOFT_RESET_OTP                      0x0000040000000000ULL	/* Reset OTP */
+#define chipcHw_REG_SOFT_RESET_USB2                     0x0000020000000000ULL	/* Reset USB2 */
+#define chipcHw_REG_SOFT_RESET_USB1                     0x0000010000000000ULL	/* Reset USB 1 */
+#define chipcHw_REG_SOFT_RESET_USB                      0x0000008000000000ULL	/* Reset USB 1 and USB2 soft reset */
+#define chipcHw_REG_SOFT_RESET_ESW                      0x0000004000000000ULL	/* Reset Ethernet switch */
+#define chipcHw_REG_SOFT_RESET_ESWCLK                   0x0000002000000000ULL	/* Reset Ethernet switch clock */
+#define chipcHw_REG_SOFT_RESET_DDRPHY                   0x0000001000000000ULL	/* Reset DDR Physical */
+#define chipcHw_REG_SOFT_RESET_DDR                      0x0000000800000000ULL	/* Reset DDR Controller */
+#define chipcHw_REG_SOFT_RESET_TSC                      0x0000000400000000ULL	/* Reset Touch screen */
+#define chipcHw_REG_SOFT_RESET_PCM                      0x0000000200000000ULL	/* Reset PCM device */
+#define chipcHw_REG_SOFT_RESET_APM                      0x0000200100000000ULL	/* Reset APM device */
+
+#define chipcHw_REG_SOFT_RESET_VPM_GLOBAL_UNHOLD        0x8000000000000000ULL	/* Unhold Global VPM */
+#define chipcHw_REG_SOFT_RESET_VPM_UNHOLD               0x4000000000000000ULL	/* Unhold VPM */
+#define chipcHw_REG_SOFT_RESET_ARM_UNHOLD               0x2000000000000000ULL	/* Unhold ARM reset  */
+#define chipcHw_REG_SOFT_RESET_UNHOLD_MASK              0xF000000000000000ULL	/* Mask to handle unhold request */
+
+/* Audio channel control defines */
+#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_ALL            0x00000001	/* Enable all audio channel */
+#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_A              0x00000002	/* Enable channel A */
+#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_B              0x00000004	/* Enable channel B */
+#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_C              0x00000008	/* Enable channel C */
+#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_NTP_CLOCK      0x00000010	/* Enable NTP clock */
+#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_PCM0_CLOCK     0x00000020	/* Enable PCM0 clock */
+#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_PCM1_CLOCK     0x00000040	/* Enable PCM1 clock */
+#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_APM_CLOCK      0x00000080	/* Enable APM clock */
+
+/* Misc. chip control defines */
+#define chipcHw_REG_MISC_CTRL_GE_SEL                    0x00040000	/* Select GE2/GE3 */
+#define chipcHw_REG_MISC_CTRL_I2S1_CLOCK_ONCHIP         0x00000000	/* Use on chip clock for I2S1 */
+#define chipcHw_REG_MISC_CTRL_I2S1_CLOCK_GPIO           0x00020000	/* Use external clock via GPIO pin 26 for I2S1 */
+#define chipcHw_REG_MISC_CTRL_I2S0_CLOCK_ONCHIP         0x00000000	/* Use on chip clock for I2S0 */
+#define chipcHw_REG_MISC_CTRL_I2S0_CLOCK_GPIO           0x00010000	/* Use external clock via GPIO pin 45 for I2S0 */
+#define chipcHw_REG_MISC_CTRL_ARM_CP15_DISABLE          0x00008000	/* Disable ARM CP15 bit */
+#define chipcHw_REG_MISC_CTRL_RTC_DISABLE               0x00000008	/* Disable RTC registers */
+#define chipcHw_REG_MISC_CTRL_BBRAM_DISABLE             0x00000004	/* Disable Battery Backed RAM */
+#define chipcHw_REG_MISC_CTRL_USB_MODE_HOST             0x00000002	/* Set USB as host */
+#define chipcHw_REG_MISC_CTRL_USB_MODE_DEVICE           0xFFFFFFFD	/* Set USB as device */
+#define chipcHw_REG_MISC_CTRL_USB_POWERON               0xFFFFFFFE	/* Power up USB */
+#define chipcHw_REG_MISC_CTRL_USB_POWEROFF              0x00000001	/* Power down USB */
+
+/* OTP configuration defines */
+#define chipcHw_REG_OTP_SECURITY_OFF                    0x0000020000000000ULL	/* Security support is OFF */
+#define chipcHw_REG_OTP_SPU_SLOW                        0x0000010000000000ULL	/* Limited SPU throughput */
+#define chipcHw_REG_OTP_LCD_SPEED                       0x0000000600000000ULL	/* Set VPM speed one */
+#define chipcHw_REG_OTP_VPM_SPEED_1                     0x0000000100000000ULL	/* Set VPM speed one */
+#define chipcHw_REG_OTP_VPM_SPEED_0                     0x0000000080000000ULL	/* Set VPM speed zero */
+#define chipcHw_REG_OTP_AXI_SPEED                       0x0000000060000000ULL	/* Set maximum AXI bus speed */
+#define chipcHw_REG_OTP_APM_DISABLE                     0x000000001F000000ULL	/* Disable APM */
+#define chipcHw_REG_OTP_PIF_DISABLE                     0x0000000000200000ULL	/* Disable PIF */
+#define chipcHw_REG_OTP_VDEC_DISABLE                    0x0000000000100000ULL	/* Disable Video decoder */
+#define chipcHw_REG_OTP_BBL_DISABLE                     0x0000000000080000ULL	/* Disable RTC and BBRAM */
+#define chipcHw_REG_OTP_LED_DISABLE                     0x0000000000040000ULL	/* Disable LED */
+#define chipcHw_REG_OTP_GE_DISABLE                      0x0000000000020000ULL	/* Disable Graphics Engine */
+#define chipcHw_REG_OTP_LCD_DISABLE                     0x0000000000010000ULL	/* Disable LCD */
+#define chipcHw_REG_OTP_KEYPAD_DISABLE                  0x0000000000008000ULL	/* Disable keypad */
+#define chipcHw_REG_OTP_UART_DISABLE                    0x0000000000004000ULL	/* Disable UART */
+#define chipcHw_REG_OTP_SDIOH_DISABLE                   0x0000000000003000ULL	/* Disable SDIO host */
+#define chipcHw_REG_OTP_HSS_DISABLE                     0x0000000000000C00ULL	/* Disable HSS */
+#define chipcHw_REG_OTP_TSC_DISABLE                     0x0000000000000200ULL	/* Disable touch screen */
+#define chipcHw_REG_OTP_USB_DISABLE                     0x0000000000000180ULL	/* Disable USB */
+#define chipcHw_REG_OTP_SGMII_DISABLE                   0x0000000000000060ULL	/* Disable SGMII */
+#define chipcHw_REG_OTP_ETH_DISABLE                     0x0000000000000018ULL	/* Disable gigabit ethernet */
+#define chipcHw_REG_OTP_ETH_PHY_DISABLE                 0x0000000000000006ULL	/* Disable ethernet PHY */
+#define chipcHw_REG_OTP_VPM_DISABLE                     0x0000000000000001ULL	/* Disable VPM */
+
+/* Sticky bit defines */
+#define chipcHw_REG_STICKY_BOOT_DONE                    0x00000001	/* Boot done */
+#define chipcHw_REG_STICKY_SOFT_RESET                   0x00000002	/* ARM soft reset */
+#define chipcHw_REG_STICKY_GENERAL_1                    0x00000004	/* General purpose bit 1 */
+#define chipcHw_REG_STICKY_GENERAL_2                    0x00000008	/* General purpose bit 2 */
+#define chipcHw_REG_STICKY_GENERAL_3                    0x00000010	/* General purpose bit 3 */
+#define chipcHw_REG_STICKY_GENERAL_4                    0x00000020	/* General purpose bit 4 */
+#define chipcHw_REG_STICKY_GENERAL_5                    0x00000040	/* General purpose bit 5 */
+#define chipcHw_REG_STICKY_POR_BROM                     0x00000080	/* Special sticky bit for security - set in BROM to avoid other modes being entered */
+#define chipcHw_REG_STICKY_ARM_RESET                    0x00000100	/* ARM reset */
+#define chipcHw_REG_STICKY_CHIP_SOFT_RESET              0x00000200	/* Chip soft reset */
+#define chipcHw_REG_STICKY_CHIP_WARM_RESET              0x00000400	/* Chip warm reset */
+#define chipcHw_REG_STICKY_WDOG_RESET                   0x00000800	/* Watchdog reset */
+#define chipcHw_REG_STICKY_OTP_RESET                    0x00001000	/* OTP reset */
+
+							/* HW phase alignment defines *//* Spare1 register definitions */
+#define chipcHw_REG_SPARE1_DDR_PHASE_INTR_ENABLE        0x80000000	/* Enable DDR phase align panic interrupt */
+#define chipcHw_REG_SPARE1_VPM_PHASE_INTR_ENABLE        0x40000000	/* Enable VPM phase align panic interrupt */
+#define chipcHw_REG_SPARE1_VPM_BUS_ACCESS_ENABLE        0x00000002	/* Enable access to VPM using system BUS */
+#define chipcHw_REG_SPARE1_DDR_BUS_ACCESS_ENABLE        0x00000001	/* Enable access to DDR using system BUS */
+							/* DDRPhaseCtrl1 register definitions */
+#define chipcHw_REG_DDR_SW_PHASE_CTRL_ENABLE            0x80000000	/* Enable DDR SW phase alignment */
+#define chipcHw_REG_DDR_HW_PHASE_CTRL_ENABLE            0x40000000	/* Enable DDR HW phase alignment */
+#define chipcHw_REG_DDR_PHASE_VALUE_GE_MASK             0x0000007F	/* DDR lower threshold for phase alignment */
+#define chipcHw_REG_DDR_PHASE_VALUE_GE_SHIFT            23
+#define chipcHw_REG_DDR_PHASE_VALUE_LE_MASK             0x0000007F	/* DDR upper threshold for phase alignment */
+#define chipcHw_REG_DDR_PHASE_VALUE_LE_SHIFT            16
+#define chipcHw_REG_DDR_PHASE_ALIGN_WAIT_CYCLE_MASK     0x0000FFFF	/* BUS Cycle to wait to run next DDR phase alignment */
+#define chipcHw_REG_DDR_PHASE_ALIGN_WAIT_CYCLE_SHIFT    0
+							/* VPMPhaseCtrl1 register definitions */
+#define chipcHw_REG_VPM_SW_PHASE_CTRL_ENABLE            0x80000000	/* Enable VPM SW phase alignment */
+#define chipcHw_REG_VPM_HW_PHASE_CTRL_ENABLE            0x40000000	/* Enable VPM HW phase alignment */
+#define chipcHw_REG_VPM_PHASE_VALUE_GE_MASK             0x0000007F	/* VPM lower threshold for phase alignment */
+#define chipcHw_REG_VPM_PHASE_VALUE_GE_SHIFT            23
+#define chipcHw_REG_VPM_PHASE_VALUE_LE_MASK             0x0000007F	/* VPM upper threshold for phase alignment */
+#define chipcHw_REG_VPM_PHASE_VALUE_LE_SHIFT            16
+#define chipcHw_REG_VPM_PHASE_ALIGN_WAIT_CYCLE_MASK     0x0000FFFF	/* BUS Cycle to wait to complete the VPM phase alignment */
+#define chipcHw_REG_VPM_PHASE_ALIGN_WAIT_CYCLE_SHIFT    0
+							/* PhaseAlignStatus register definitions */
+#define chipcHw_REG_DDR_TIMEOUT_INTR_STATUS             0x80000000	/* DDR time out interrupt status */
+#define chipcHw_REG_DDR_PHASE_STATUS_MASK               0x0000007F	/* DDR phase status value */
+#define chipcHw_REG_DDR_PHASE_STATUS_SHIFT              24
+#define chipcHw_REG_DDR_PHASE_ALIGNED                   0x00800000	/* DDR Phase aligned status */
+#define chipcHw_REG_DDR_LOAD                            0x00400000	/* Load DDR phase status */
+#define chipcHw_REG_DDR_PHASE_CTRL_MASK                 0x0000003F	/* DDR phase control value */
+#define chipcHw_REG_DDR_PHASE_CTRL_SHIFT                16
+#define chipcHw_REG_VPM_TIMEOUT_INTR_STATUS             0x80000000	/* VPM time out interrupt status */
+#define chipcHw_REG_VPM_PHASE_STATUS_MASK               0x0000007F	/* VPM phase status value */
+#define chipcHw_REG_VPM_PHASE_STATUS_SHIFT              8
+#define chipcHw_REG_VPM_PHASE_ALIGNED                   0x00000080	/* VPM Phase aligned status */
+#define chipcHw_REG_VPM_LOAD                            0x00000040	/* Load VPM phase status */
+#define chipcHw_REG_VPM_PHASE_CTRL_MASK                 0x0000003F	/* VPM phase control value */
+#define chipcHw_REG_VPM_PHASE_CTRL_SHIFT                0
+							/* DDRPhaseCtrl2 register definitions */
+#define chipcHw_REG_DDR_INTR_SERVICED                   0x02000000	/* Acknowledge that interrupt was serviced */
+#define chipcHw_REG_DDR_TIMEOUT_INTR_ENABLE             0x01000000	/* Enable time out interrupt */
+#define chipcHw_REG_DDR_LOAD_COUNT_PHASE_CTRL_MASK      0x0000000F	/* Wait before toggling load_ch */
+#define chipcHw_REG_DDR_LOAD_COUNT_PHASE_CTRL_SHIFT     20
+#define chipcHw_REG_DDR_TOTAL_LOAD_COUNT_CTRL_MASK      0x0000000F	/* Total wait to settle ph_ctrl and load_ch */
+#define chipcHw_REG_DDR_TOTAL_LOAD_COUNT_CTRL_SHIFT     16
+#define chipcHw_REG_DDR_PHASE_TIMEOUT_COUNT_MASK        0x0000FFFF	/* Time out value for DDR HW phase alignment */
+#define chipcHw_REG_DDR_PHASE_TIMEOUT_COUNT_SHIFT       0
+							/* VPMPhaseCtrl2 register definitions */
+#define chipcHw_REG_VPM_INTR_SELECT_MASK                0x00000003	/* Interrupt select */
+#define chipcHw_REG_VPM_INTR_SELECT_SHIFT               26
+#define chipcHw_REG_VPM_INTR_DISABLE                    0x00000000
+#define chipcHw_REG_VPM_INTR_FAST                       (0x1 << chipcHw_REG_VPM_INTR_SELECT_SHIFT)
+#define chipcHw_REG_VPM_INTR_MEDIUM                     (0x2 << chipcHw_REG_VPM_INTR_SELECT_SHIFT)
+#define chipcHw_REG_VPM_INTR_SLOW                       (0x3 << chipcHw_REG_VPM_INTR_SELECT_SHIFT)
+#define chipcHw_REG_VPM_INTR_SERVICED                   0x02000000	/* Acknowledge that interrupt was serviced */
+#define chipcHw_REG_VPM_TIMEOUT_INTR_ENABLE             0x01000000	/* Enable time out interrupt */
+#define chipcHw_REG_VPM_LOAD_COUNT_PHASE_CTRL_MASK      0x0000000F	/* Wait before toggling load_ch */
+#define chipcHw_REG_VPM_LOAD_COUNT_PHASE_CTRL_SHIFT     20
+#define chipcHw_REG_VPM_TOTAL_LOAD_COUNT_CTRL_MASK      0x0000000F	/* Total wait cycle to settle ph_ctrl and load_ch */
+#define chipcHw_REG_VPM_TOTAL_LOAD_COUNT_CTRL_SHIFT     16
+#define chipcHw_REG_VPM_PHASE_TIMEOUT_COUNT_MASK        0x0000FFFF	/* Time out value for VPM HW phase alignment */
+#define chipcHw_REG_VPM_PHASE_TIMEOUT_COUNT_SHIFT       0
+
+#endif /* CHIPCHW_REG_H */
diff --git a/arch/arm/mach-bcmring/include/mach/csp/ddrcReg.h b/arch/arm/mach-bcmring/include/mach/csp/ddrcReg.h
new file mode 100644
index 000000000000..f1b68e26fa6d
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/ddrcReg.h
@@ -0,0 +1,872 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*  @file    ddrcReg.h
+*
+*  @brief   Register definitions for BCMRING DDR2 Controller and PHY
+*
+*/
+/****************************************************************************/
+
+#ifndef DDRC_REG_H
+#define DDRC_REG_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#include <csp/reg.h>
+#include <csp/stdint.h>
+
+#include <mach/csp/mm_io.h>
+
+/* ---- Public Constants and Types --------------------------------------- */
+
+/*********************************************************************/
+/* DDR2 Controller (ARM PL341) register definitions */
+/*********************************************************************/
+
+/* -------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+/* ARM PL341 DDR2 configuration registers, offset 0x000 */
+/* -------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+
+	typedef struct {
+		uint32_t memcStatus;
+		uint32_t memcCmd;
+		uint32_t directCmd;
+		uint32_t memoryCfg;
+		uint32_t refreshPrd;
+		uint32_t casLatency;
+		uint32_t writeLatency;
+		uint32_t tMrd;
+		uint32_t tRas;
+		uint32_t tRc;
+		uint32_t tRcd;
+		uint32_t tRfc;
+		uint32_t tRp;
+		uint32_t tRrd;
+		uint32_t tWr;
+		uint32_t tWtr;
+		uint32_t tXp;
+		uint32_t tXsr;
+		uint32_t tEsr;
+		uint32_t memoryCfg2;
+		uint32_t memoryCfg3;
+		uint32_t tFaw;
+	} ddrcReg_CTLR_MEMC_REG_t;
+
+#define ddrcReg_CTLR_MEMC_REG_OFFSET                    0x0000
+#define ddrcReg_CTLR_MEMC_REGP                          ((volatile ddrcReg_CTLR_MEMC_REG_t *)  (MM_IO_BASE_DDRC + ddrcReg_CTLR_MEMC_REG_OFFSET))
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_MEMC_STATUS_BANKS_MASK             (0x3 << 12)
+#define ddrcReg_CTLR_MEMC_STATUS_BANKS_4                (0x0 << 12)
+#define ddrcReg_CTLR_MEMC_STATUS_BANKS_8                (0x3 << 12)
+
+#define ddrcReg_CTLR_MEMC_STATUS_MONITORS_MASK          (0x3 << 10)
+#define ddrcReg_CTLR_MEMC_STATUS_MONITORS_0             (0x0 << 10)
+#define ddrcReg_CTLR_MEMC_STATUS_MONITORS_1             (0x1 << 10)
+#define ddrcReg_CTLR_MEMC_STATUS_MONITORS_2             (0x2 << 10)
+#define ddrcReg_CTLR_MEMC_STATUS_MONITORS_4             (0x3 << 10)
+
+#define ddrcReg_CTLR_MEMC_STATUS_CHIPS_MASK             (0x3 << 7)
+#define ddrcReg_CTLR_MEMC_STATUS_CHIPS_1                (0x0 << 7)
+#define ddrcReg_CTLR_MEMC_STATUS_CHIPS_2                (0x1 << 7)
+#define ddrcReg_CTLR_MEMC_STATUS_CHIPS_3                (0x2 << 7)
+#define ddrcReg_CTLR_MEMC_STATUS_CHIPS_4                (0x3 << 7)
+
+#define ddrcReg_CTLR_MEMC_STATUS_TYPE_MASK              (0x7 << 4)
+#define ddrcReg_CTLR_MEMC_STATUS_TYPE_DDR2              (0x5 << 4)
+
+#define ddrcReg_CTLR_MEMC_STATUS_WIDTH_MASK             (0x3 << 2)
+#define ddrcReg_CTLR_MEMC_STATUS_WIDTH_16               (0x0 << 2)
+#define ddrcReg_CTLR_MEMC_STATUS_WIDTH_32               (0x1 << 2)
+#define ddrcReg_CTLR_MEMC_STATUS_WIDTH_64               (0x2 << 2)
+#define ddrcReg_CTLR_MEMC_STATUS_WIDTH_128              (0x3 << 2)
+
+#define ddrcReg_CTLR_MEMC_STATUS_STATE_MASK             (0x3 << 0)
+#define ddrcReg_CTLR_MEMC_STATUS_STATE_CONFIG           (0x0 << 0)
+#define ddrcReg_CTLR_MEMC_STATUS_STATE_READY            (0x1 << 0)
+#define ddrcReg_CTLR_MEMC_STATUS_STATE_PAUSED           (0x2 << 0)
+#define ddrcReg_CTLR_MEMC_STATUS_STATE_LOWPWR           (0x3 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_MEMC_CMD_MASK                      (0x7 << 0)
+#define ddrcReg_CTLR_MEMC_CMD_GO                        (0x0 << 0)
+#define ddrcReg_CTLR_MEMC_CMD_SLEEP                     (0x1 << 0)
+#define ddrcReg_CTLR_MEMC_CMD_WAKEUP                    (0x2 << 0)
+#define ddrcReg_CTLR_MEMC_CMD_PAUSE                     (0x3 << 0)
+#define ddrcReg_CTLR_MEMC_CMD_CONFIGURE                 (0x4 << 0)
+#define ddrcReg_CTLR_MEMC_CMD_ACTIVE_PAUSE              (0x7 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_DIRECT_CMD_CHIP_SHIFT              20
+#define ddrcReg_CTLR_DIRECT_CMD_CHIP_MASK               (0x3 << ddrcReg_CTLR_DIRECT_CMD_CHIP_SHIFT)
+
+#define ddrcReg_CTLR_DIRECT_CMD_TYPE_PRECHARGEALL       (0x0 << 18)
+#define ddrcReg_CTLR_DIRECT_CMD_TYPE_AUTOREFRESH        (0x1 << 18)
+#define ddrcReg_CTLR_DIRECT_CMD_TYPE_MODEREG            (0x2 << 18)
+#define ddrcReg_CTLR_DIRECT_CMD_TYPE_NOP                (0x3 << 18)
+
+#define ddrcReg_CTLR_DIRECT_CMD_BANK_SHIFT              16
+#define ddrcReg_CTLR_DIRECT_CMD_BANK_MASK               (0x3 << ddrcReg_CTLR_DIRECT_CMD_BANK_SHIFT)
+
+#define ddrcReg_CTLR_DIRECT_CMD_ADDR_SHIFT              0
+#define ddrcReg_CTLR_DIRECT_CMD_ADDR_MASK               (0x1ffff << ddrcReg_CTLR_DIRECT_CMD_ADDR_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_MEMORY_CFG_CHIP_CNT_MASK           (0x3 << 21)
+#define ddrcReg_CTLR_MEMORY_CFG_CHIP_CNT_1              (0x0 << 21)
+#define ddrcReg_CTLR_MEMORY_CFG_CHIP_CNT_2              (0x1 << 21)
+#define ddrcReg_CTLR_MEMORY_CFG_CHIP_CNT_3              (0x2 << 21)
+#define ddrcReg_CTLR_MEMORY_CFG_CHIP_CNT_4              (0x3 << 21)
+
+#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_MASK           (0x7 << 18)
+#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_3_0            (0x0 << 18)
+#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_4_1            (0x1 << 18)
+#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_5_2            (0x2 << 18)
+#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_6_3            (0x3 << 18)
+#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_7_4            (0x4 << 18)
+#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_8_5            (0x5 << 18)
+#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_9_6            (0x6 << 18)
+#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_10_7           (0x7 << 18)
+
+#define ddrcReg_CTLR_MEMORY_CFG_BURST_LEN_MASK          (0x7 << 15)
+#define ddrcReg_CTLR_MEMORY_CFG_BURST_LEN_4             (0x2 << 15)
+#define ddrcReg_CTLR_MEMORY_CFG_BURST_LEN_8             (0x3 << 15)	/* @note Not supported in PL341 */
+
+#define ddrcReg_CTLR_MEMORY_CFG_PWRDOWN_ENABLE          (0x1 << 13)
+
+#define ddrcReg_CTLR_MEMORY_CFG_PWRDOWN_CYCLES_SHIFT    7
+#define ddrcReg_CTLR_MEMORY_CFG_PWRDOWN_CYCLES_MASK     (0x3f << ddrcReg_CTLR_MEMORY_CFG_PWRDOWN_CYCLES_SHIFT)
+
+#define ddrcReg_CTLR_MEMORY_CFG_AXI_ROW_BITS_MASK       (0x7 << 3)
+#define ddrcReg_CTLR_MEMORY_CFG_AXI_ROW_BITS_11         (0x0 << 3)
+#define ddrcReg_CTLR_MEMORY_CFG_AXI_ROW_BITS_12         (0x1 << 3)
+#define ddrcReg_CTLR_MEMORY_CFG_AXI_ROW_BITS_13         (0x2 << 3)
+#define ddrcReg_CTLR_MEMORY_CFG_AXI_ROW_BITS_14         (0x3 << 3)
+#define ddrcReg_CTLR_MEMORY_CFG_AXI_ROW_BITS_15         (0x4 << 3)
+#define ddrcReg_CTLR_MEMORY_CFG_AXI_ROW_BITS_16         (0x5 << 3)
+
+#define ddrcReg_CTLR_MEMORY_CFG_AXI_COL_BITS_MASK       (0x7 << 0)
+#define ddrcReg_CTLR_MEMORY_CFG_AXI_COL_BITS_9          (0x1 << 0)
+#define ddrcReg_CTLR_MEMORY_CFG_AXI_COL_BITS_10         (0x2 << 0)
+#define ddrcReg_CTLR_MEMORY_CFG_AXI_COL_BITS_11         (0x3 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_REFRESH_PRD_SHIFT                  0
+#define ddrcReg_CTLR_REFRESH_PRD_MASK                   (0x7fff << ddrcReg_CTLR_REFRESH_PRD_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_CAS_LATENCY_SHIFT                  1
+#define ddrcReg_CTLR_CAS_LATENCY_MASK                   (0x7 << ddrcReg_CTLR_CAS_LATENCY_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_WRITE_LATENCY_SHIFT                0
+#define ddrcReg_CTLR_WRITE_LATENCY_MASK                 (0x7 << ddrcReg_CTLR_WRITE_LATENCY_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_MRD_SHIFT                        0
+#define ddrcReg_CTLR_T_MRD_MASK                         (0x7f << ddrcReg_CTLR_T_MRD_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_RAS_SHIFT                        0
+#define ddrcReg_CTLR_T_RAS_MASK                         (0x1f << ddrcReg_CTLR_T_RAS_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_RC_SHIFT                         0
+#define ddrcReg_CTLR_T_RC_MASK                          (0x1f << ddrcReg_CTLR_T_RC_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_RCD_SCHEDULE_DELAY_SHIFT         8
+#define ddrcReg_CTLR_T_RCD_SCHEDULE_DELAY_MASK          (0x7 << ddrcReg_CTLR_T_RCD_SCHEDULE_DELAY_SHIFT)
+
+#define ddrcReg_CTLR_T_RCD_SHIFT                        0
+#define ddrcReg_CTLR_T_RCD_MASK                         (0x7 << ddrcReg_CTLR_T_RCD_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_RFC_SCHEDULE_DELAY_SHIFT         8
+#define ddrcReg_CTLR_T_RFC_SCHEDULE_DELAY_MASK          (0x7f << ddrcReg_CTLR_T_RFC_SCHEDULE_DELAY_SHIFT)
+
+#define ddrcReg_CTLR_T_RFC_SHIFT                        0
+#define ddrcReg_CTLR_T_RFC_MASK                         (0x7f << ddrcReg_CTLR_T_RFC_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_RP_SCHEDULE_DELAY_SHIFT          8
+#define ddrcReg_CTLR_T_RP_SCHEDULE_DELAY_MASK           (0x7 << ddrcReg_CTLR_T_RP_SCHEDULE_DELAY_SHIFT)
+
+#define ddrcReg_CTLR_T_RP_SHIFT                         0
+#define ddrcReg_CTLR_T_RP_MASK                          (0xf << ddrcReg_CTLR_T_RP_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_RRD_SHIFT                        0
+#define ddrcReg_CTLR_T_RRD_MASK                         (0xf << ddrcReg_CTLR_T_RRD_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_WR_SHIFT                         0
+#define ddrcReg_CTLR_T_WR_MASK                          (0x7 << ddrcReg_CTLR_T_WR_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_WTR_SHIFT                        0
+#define ddrcReg_CTLR_T_WTR_MASK                         (0x7 << ddrcReg_CTLR_T_WTR_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_XP_SHIFT                         0
+#define ddrcReg_CTLR_T_XP_MASK                          (0xff << ddrcReg_CTLR_T_XP_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_XSR_SHIFT                        0
+#define ddrcReg_CTLR_T_XSR_MASK                         (0xff << ddrcReg_CTLR_T_XSR_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_ESR_SHIFT                        0
+#define ddrcReg_CTLR_T_ESR_MASK                         (0xff << ddrcReg_CTLR_T_ESR_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_MEMORY_CFG2_WIDTH_MASK             (0x3 << 6)
+#define ddrcReg_CTLR_MEMORY_CFG2_WIDTH_16BITS           (0 << 6)
+#define ddrcReg_CTLR_MEMORY_CFG2_WIDTH_32BITS           (1 << 6)
+#define ddrcReg_CTLR_MEMORY_CFG2_WIDTH_64BITS           (2 << 6)
+
+#define ddrcReg_CTLR_MEMORY_CFG2_AXI_BANK_BITS_MASK     (0x3 << 4)
+#define ddrcReg_CTLR_MEMORY_CFG2_AXI_BANK_BITS_2        (0 << 4)
+#define ddrcReg_CTLR_MEMORY_CFG2_AXI_BANK_BITS_3        (3 << 4)
+
+#define ddrcReg_CTLR_MEMORY_CFG2_CKE_INIT_STATE_LOW     (0 << 3)
+#define ddrcReg_CTLR_MEMORY_CFG2_CKE_INIT_STATE_HIGH    (1 << 3)
+
+#define ddrcReg_CTLR_MEMORY_CFG2_DQM_INIT_STATE_LOW     (0 << 2)
+#define ddrcReg_CTLR_MEMORY_CFG2_DQM_INIT_STATE_HIGH    (1 << 2)
+
+#define ddrcReg_CTLR_MEMORY_CFG2_CLK_MASK               (0x3 << 0)
+#define ddrcReg_CTLR_MEMORY_CFG2_CLK_ASYNC              (0 << 0)
+#define ddrcReg_CTLR_MEMORY_CFG2_CLK_SYNC_A_LE_M        (1 << 0)
+#define ddrcReg_CTLR_MEMORY_CFG2_CLK_SYNC_A_GT_M        (3 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_MEMORY_CFG3_REFRESH_TO_SHIFT       0
+#define ddrcReg_CTLR_MEMORY_CFG3_REFRESH_TO_MASK        (0x7 << ddrcReg_CTLR_MEMORY_CFG3_REFRESH_TO_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_FAW_SCHEDULE_DELAY_SHIFT         8
+#define ddrcReg_CTLR_T_FAW_SCHEDULE_DELAY_MASK          (0x1f << ddrcReg_CTLR_T_FAW_SCHEDULE_DELAY_SHIFT)
+
+#define ddrcReg_CTLR_T_FAW_PERIOD_SHIFT                 0
+#define ddrcReg_CTLR_T_FAW_PERIOD_MASK                  (0x1f << ddrcReg_CTLR_T_FAW_PERIOD_SHIFT)
+
+/* -------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+/* ARM PL341 AXI ID QOS configuration registers, offset 0x100 */
+/* -------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+
+#define ddrcReg_CTLR_QOS_CNT                            16
+#define ddrcReg_CTLR_QOS_MAX                            (ddrcReg_CTLR_QOS_CNT - 1)
+
+	typedef struct {
+		uint32_t cfg[ddrcReg_CTLR_QOS_CNT];
+	} ddrcReg_CTLR_QOS_REG_t;
+
+#define ddrcReg_CTLR_QOS_REG_OFFSET                     0x100
+#define ddrcReg_CTLR_QOS_REGP                           ((volatile ddrcReg_CTLR_QOS_REG_t *) (MM_IO_BASE_DDRC + ddrcReg_CTLR_QOS_REG_OFFSET))
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_QOS_CFG_MAX_SHIFT                  2
+#define ddrcReg_CTLR_QOS_CFG_MAX_MASK                   (0xff << ddrcReg_CTLR_QOS_CFG_MAX_SHIFT)
+
+#define ddrcReg_CTLR_QOS_CFG_MIN_SHIFT                  1
+#define ddrcReg_CTLR_QOS_CFG_MIN_MASK                   (1 << ddrcReg_CTLR_QOS_CFG_MIN_SHIFT)
+
+#define ddrcReg_CTLR_QOS_CFG_ENABLE                     (1 << 0)
+
+/* -------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+/* ARM PL341 Memory chip configuration registers, offset 0x200 */
+/* -------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+
+#define ddrcReg_CTLR_CHIP_CNT                           4
+#define ddrcReg_CTLR_CHIP_MAX                           (ddrcReg_CTLR_CHIP_CNT - 1)
+
+	typedef struct {
+		uint32_t cfg[ddrcReg_CTLR_CHIP_CNT];
+	} ddrcReg_CTLR_CHIP_REG_t;
+
+#define ddrcReg_CTLR_CHIP_REG_OFFSET                    0x200
+#define ddrcReg_CTLR_CHIP_REGP                          ((volatile ddrcReg_CTLR_CHIP_REG_t *) (MM_IO_BASE_DDRC + ddrcReg_CTLR_CHIP_REG_OFFSET))
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_CHIP_CFG_MEM_ORG_MASK              (1 << 16)
+#define ddrcReg_CTLR_CHIP_CFG_MEM_ORG_ROW_BANK_COL      (0 << 16)
+#define ddrcReg_CTLR_CHIP_CFG_MEM_ORG_BANK_ROW_COL      (1 << 16)
+
+#define ddrcReg_CTLR_CHIP_CFG_AXI_ADDR_MATCH_SHIFT      8
+#define ddrcReg_CTLR_CHIP_CFG_AXI_ADDR_MATCH_MASK       (0xff << ddrcReg_CTLR_CHIP_CFG_AXI_ADDR_MATCH_SHIFT)
+
+#define ddrcReg_CTLR_CHIP_CFG_AXI_ADDR_MASK_SHIFT       0
+#define ddrcReg_CTLR_CHIP_CFG_AXI_ADDR_MASK_MASK        (0xff << ddrcReg_CTLR_CHIP_CFG_AXI_ADDR_MASK_SHIFT)
+
+/* -------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+/* ARM PL341 User configuration registers, offset 0x300 */
+/* -------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+
+#define ddrcReg_CTLR_USER_OUTPUT_CNT                    2
+
+	typedef struct {
+		uint32_t input;
+		uint32_t output[ddrcReg_CTLR_USER_OUTPUT_CNT];
+		uint32_t feature;
+	} ddrcReg_CTLR_USER_REG_t;
+
+#define ddrcReg_CTLR_USER_REG_OFFSET                    0x300
+#define ddrcReg_CTLR_USER_REGP                          ((volatile ddrcReg_CTLR_USER_REG_t *) (MM_IO_BASE_DDRC + ddrcReg_CTLR_USER_REG_OFFSET))
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_USER_INPUT_STATUS_SHIFT            0
+#define ddrcReg_CTLR_USER_INPUT_STATUS_MASK             (0xff << ddrcReg_CTLR_USER_INPUT_STATUS_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_USER_OUTPUT_CFG_SHIFT              0
+#define ddrcReg_CTLR_USER_OUTPUT_CFG_MASK               (0xff << ddrcReg_CTLR_USER_OUTPUT_CFG_SHIFT)
+
+#define ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_SHIFT      1
+#define ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_MASK       (1 << ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_SHIFT)
+#define ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_BP134      (0 << ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_SHIFT)
+#define ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_PL301      (1 << ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_SHIFT)
+#define ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_REGISTERED ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_PL301
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_FEATURE_WRITE_BLOCK_DISABLE        (1 << 2)
+#define ddrcReg_CTLR_FEATURE_EARLY_BURST_RSP_DISABLE    (1 << 0)
+
+/*********************************************************************/
+/* Broadcom DDR23 PHY register definitions */
+/*********************************************************************/
+
+/* -------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+/* Broadcom DDR23 PHY Address and Control register definitions */
+/* -------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+
+	typedef struct {
+		uint32_t revision;
+		uint32_t pmCtl;
+		 REG32_RSVD(0x0008, 0x0010);
+		uint32_t pllStatus;
+		uint32_t pllCfg;
+		uint32_t pllPreDiv;
+		uint32_t pllDiv;
+		uint32_t pllCtl1;
+		uint32_t pllCtl2;
+		uint32_t ssCtl;
+		uint32_t ssCfg;
+		uint32_t vdlStatic;
+		uint32_t vdlDynamic;
+		uint32_t padIdle;
+		uint32_t pvtComp;
+		uint32_t padDrive;
+		uint32_t clkRgltrCtl;
+	} ddrcReg_PHY_ADDR_CTL_REG_t;
+
+#define ddrcReg_PHY_ADDR_CTL_REG_OFFSET                 0x0400
+#define ddrcReg_PHY_ADDR_CTL_REGP                       ((volatile ddrcReg_PHY_ADDR_CTL_REG_t *) (MM_IO_BASE_DDRC + ddrcReg_PHY_ADDR_CTL_REG_OFFSET))
+
+/* @todo These SS definitions are duplicates of ones below */
+
+#define ddrcReg_PHY_ADDR_SS_CTRL_ENABLE                 0x00000001
+#define ddrcReg_PHY_ADDR_SS_CFG_CYCLE_PER_TICK_MASK     0xFFFF0000
+#define ddrcReg_PHY_ADDR_SS_CFG_CYCLE_PER_TICK_SHIFT    16
+#define ddrcReg_PHY_ADDR_SS_CFG_MIN_CYCLE_PER_TICK      10	/* Higher the value, lower the SS modulation frequency */
+#define ddrcReg_PHY_ADDR_SS_CFG_NDIV_AMPLITUDE_MASK     0x0000FFFF
+#define ddrcReg_PHY_ADDR_SS_CFG_NDIV_AMPLITUDE_SHIFT    0
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_REVISION_MAJOR_SHIFT       8
+#define ddrcReg_PHY_ADDR_CTL_REVISION_MAJOR_MASK        (0xff << ddrcReg_PHY_ADDR_CTL_REVISION_MAJOR_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_REVISION_MINOR_SHIFT       0
+#define ddrcReg_PHY_ADDR_CTL_REVISION_MINOR_MASK        (0xff << ddrcReg_PHY_ADDR_CTL_REVISION_MINOR_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_CLK_PM_CTL_DDR_CLK_DISABLE (1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_STATUS_LOCKED          (1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_DIV2_CLK_RESET     (1 << 31)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_TEST_SEL_SHIFT     17
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_TEST_SEL_MASK      (0x1f << ddrcReg_PHY_ADDR_CTL_PLL_CFG_TEST_SEL_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_TEST_ENABLE        (1 << 16)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_BGAP_ADJ_SHIFT     12
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_BGAP_ADJ_MASK      (0xf << ddrcReg_PHY_ADDR_CTL_PLL_CFG_BGAP_ADJ_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_VCO_RNG            (1 << 7)
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_CH1_PWRDWN         (1 << 6)
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_BYPASS_ENABLE      (1 << 5)
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_CLKOUT_ENABLE      (1 << 4)
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_D_RESET            (1 << 3)
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_A_RESET            (1 << 2)
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_PWRDWN             (1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_DITHER_MFB     (1 << 26)
+#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_PWRDWN         (1 << 25)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_MODE_SHIFT     20
+#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_MODE_MASK      (0x7 << ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_MODE_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_INT_SHIFT      8
+#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_INT_MASK       (0x1ff << ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_INT_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_P2_SHIFT       4
+#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_P2_MASK        (0xf << ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_P2_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_P1_SHIFT       0
+#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_P1_MASK        (0xf << ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_P1_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_DIV_M1_SHIFT           24
+#define ddrcReg_PHY_ADDR_CTL_PLL_DIV_M1_MASK            (0xff << ddrcReg_PHY_ADDR_CTL_PLL_DIV_M1_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_DIV_FRAC_SHIFT         0
+#define ddrcReg_PHY_ADDR_CTL_PLL_DIV_FRAC_MASK          (0xffffff << ddrcReg_PHY_ADDR_CTL_PLL_DIV_FRAC_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_TESTA_SHIFT       30
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_TESTA_MASK        (0x3 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_TESTA_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_KVCO_XS_SHIFT     27
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_KVCO_XS_MASK      (0x7 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_KVCO_XS_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_KVCO_XF_SHIFT     24
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_KVCO_XF_MASK      (0x7 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_KVCO_XF_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_LPF_BW_SHIFT      22
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_LPF_BW_MASK       (0x3 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_LPF_BW_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_LF_ORDER          (0x1 << 21)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CN_SHIFT          19
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CN_MASK           (0x3 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CN_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_RN_SHIFT          17
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_RN_MASK           (0x3 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_RN_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CP_SHIFT          15
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CP_MASK           (0x3 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CP_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CZ_SHIFT          13
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CZ_MASK           (0x3 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CZ_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_RZ_SHIFT          10
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_RZ_MASK           (0x7 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_RZ_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_ICPX_SHIFT        5
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_ICPX_MASK         (0x1f << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_ICPX_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_ICP_OFF_SHIFT     0
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_ICP_OFF_MASK      (0x1f << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_ICP_OFF_SHIFT)
+
+/* ----------------------------------------------------- */
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL2_PTAP_ADJ_SHIFT    4
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL2_PTAP_ADJ_MASK     (0x3 << ddrcReg_PHY_ADDR_CTL_PLL_CTL2_PTAP_ADJ_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL2_CTAP_ADJ_SHIFT    2
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL2_CTAP_ADJ_MASK     (0x3 << ddrcReg_PHY_ADDR_CTL_PLL_CTL2_CTAP_ADJ_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL2_LOWCUR_ENABLE     (0x1 << 1)
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL2_BIASIN_ENABLE     (0x1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_SS_EN_ENABLE           (0x1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_SS_CFG_CYC_PER_TICK_SHIFT  16
+#define ddrcReg_PHY_ADDR_CTL_PLL_SS_CFG_CYC_PER_TICK_MASK   (0xffff << ddrcReg_PHY_ADDR_CTL_PLL_SS_CFG_CYC_PER_TICK_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_SS_CFG_NDIV_AMP_SHIFT      0
+#define ddrcReg_PHY_ADDR_CTL_PLL_SS_CFG_NDIV_AMP_MASK       (0xffff << ddrcReg_PHY_ADDR_CTL_PLL_SS_CFG_NDIV_AMP_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_FORCE           (1 << 20)
+#define ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_ENABLE          (1 << 16)
+
+#define ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_FALL_SHIFT      12
+#define ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_FALL_MASK       (0x3 << ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_FALL_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_RISE_SHIFT      8
+#define ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_RISE_MASK       (0x3 << ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_RISE_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_STEP_SHIFT      0
+#define ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_STEP_MASK       (0x3f << ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_STEP_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_ENABLE         (1 << 16)
+
+#define ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_FALL_SHIFT     12
+#define ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_FALL_MASK      (0x3 << ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_FALL_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_RISE_SHIFT     8
+#define ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_RISE_MASK      (0x3 << ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_RISE_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_STEP_SHIFT     0
+#define ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_STEP_MASK      (0x3f << ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_STEP_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_PAD_IDLE_ENABLE            (1u << 31)
+#define ddrcReg_PHY_ADDR_CTL_PAD_IDLE_RXENB_DISABLE     (1 << 8)
+#define ddrcReg_PHY_ADDR_CTL_PAD_IDLE_CTL_IDDQ_DISABLE  (1 << 6)
+#define ddrcReg_PHY_ADDR_CTL_PAD_IDLE_CTL_REB_DISABLE   (1 << 5)
+#define ddrcReg_PHY_ADDR_CTL_PAD_IDLE_CTL_OEB_DISABLE   (1 << 4)
+#define ddrcReg_PHY_ADDR_CTL_PAD_IDLE_CKE_IDDQ_DISABLE  (1 << 2)
+#define ddrcReg_PHY_ADDR_CTL_PAD_IDLE_CKE_REB_DISABLE   (1 << 1)
+#define ddrcReg_PHY_ADDR_CTL_PAD_IDLE_CKE_OEB_DISABLE   (1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_PD_DONE           (1 << 30)
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_ND_DONE           (1 << 29)
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_SAMPLE_DONE       (1 << 28)
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_SAMPLE_AUTO_ENABLE    (1 << 27)
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_SAMPLE_ENABLE     (1 << 26)
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_ADDR_OVR_ENABLE   (1 << 25)
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_DQ_OVR_ENABLE     (1 << 24)
+
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_PD_SHIFT          20
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_PD_MASK           (0xf << ddrcReg_PHY_ADDR_CTL_PVT_COMP_PD_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_ND_SHIFT          16
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_ND_MASK           (0xf << ddrcReg_PHY_ADDR_CTL_PVT_COMP_ND_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_ADDR_PD_SHIFT     12
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_ADDR_PD_MASK      (0xf << ddrcReg_PHY_ADDR_CTL_PVT_COMP_ADDR_PD_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_ADDR_ND_SHIFT     8
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_ADDR_ND_MASK      (0xf << ddrcReg_PHY_ADDR_CTL_PVT_COMP_ADDR_ND_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_DQ_PD_SHIFT       4
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_DQ_PD_MASK        (0xf << ddrcReg_PHY_ADDR_CTL_PVT_COMP_DQ_PD_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_DQ_ND_SHIFT       0
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_DQ_ND_MASK        (0xf << ddrcReg_PHY_ADDR_CTL_PVT_COMP_DQ_ND_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_PAD_DRIVE_RT60B            (1 << 4)
+#define ddrcReg_PHY_ADDR_CTL_PAD_DRIVE_SEL_SSTL18       (1 << 3)
+#define ddrcReg_PHY_ADDR_CTL_PAD_DRIVE_SELTXDRV_CI      (1 << 2)
+#define ddrcReg_PHY_ADDR_CTL_PAD_DRIVE_SELRXDRV         (1 << 1)
+#define ddrcReg_PHY_ADDR_CTL_PAD_DRIVE_SLEW             (1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_CLK_RGLTR_CTL_PWR_HALF     (1 << 1)
+#define ddrcReg_PHY_ADDR_CTL_CLK_RGLTR_CTL_PWR_OFF      (1 << 0)
+
+/* -------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+/* Broadcom DDR23 PHY Byte Lane register definitions */
+/* -------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+
+#define ddrcReg_PHY_BYTE_LANE_CNT                       2
+#define ddrcReg_PHY_BYTE_LANE_MAX                       (ddrcReg_CTLR_BYTE_LANE_CNT - 1)
+
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_CNT               8
+
+	typedef struct {
+		uint32_t revision;
+		uint32_t vdlCalibrate;
+		uint32_t vdlStatus;
+		 REG32_RSVD(0x000c, 0x0010);
+		uint32_t vdlOverride[ddrcReg_PHY_BYTE_LANE_VDL_OVR_CNT];
+		uint32_t readCtl;
+		uint32_t readStatus;
+		uint32_t readClear;
+		uint32_t padIdleCtl;
+		uint32_t padDriveCtl;
+		uint32_t padClkCtl;
+		uint32_t writeCtl;
+		uint32_t clkRegCtl;
+	} ddrcReg_PHY_BYTE_LANE_REG_t;
+
+/* There are 2 instances of the byte Lane registers, one for each byte lane. */
+#define ddrcReg_PHY_BYTE_LANE_1_REG_OFFSET              0x0500
+#define ddrcReg_PHY_BYTE_LANE_2_REG_OFFSET              0x0600
+
+#define ddrcReg_PHY_BYTE_LANE_1_REGP                    ((volatile ddrcReg_PHY_BYTE_LANE_REG_t *) (MM_IO_BASE_DDRC + ddrcReg_PHY_BYTE_LANE_1_REG_OFFSET))
+#define ddrcReg_PHY_BYTE_LANE_2_REGP                    ((volatile ddrcReg_PHY_BYTE_LANE_REG_t *) (MM_IO_BASE_DDRC + ddrcReg_PHY_BYTE_LANE_2_REG_OFFSET))
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_BYTE_LANE_REVISION_MAJOR_SHIFT      8
+#define ddrcReg_PHY_BYTE_LANE_REVISION_MAJOR_MASK       (0xff << ddrcReg_PHY_BYTE_LANE_REVISION_MAJOR_SHIFT)
+
+#define ddrcReg_PHY_BYTE_LANE_REVISION_MINOR_SHIFT      0
+#define ddrcReg_PHY_BYTE_LANE_REVISION_MINOR_MASK       (0xff << ddrcReg_PHY_BYTE_LANE_REVISION_MINOR_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_BYTE_LANE_VDL_CALIB_CLK_2CYCLE      (1 << 4)
+#define ddrcReg_PHY_BYTE_LANE_VDL_CALIB_CLK_1CYCLE      (0 << 4)
+
+#define ddrcReg_PHY_BYTE_LANE_VDL_CALIB_TEST            (1 << 3)
+#define ddrcReg_PHY_BYTE_LANE_VDL_CALIB_ALWAYS          (1 << 2)
+#define ddrcReg_PHY_BYTE_LANE_VDL_CALIB_ONCE            (1 << 1)
+#define ddrcReg_PHY_BYTE_LANE_VDL_CALIB_FAST            (1 << 0)
+
+/* ----------------------------------------------------- */
+
+/* The byte lane VDL status calibTotal[9:0] is comprised of [9:4] step value, [3:2] fine fall */
+/* and [1:0] fine rise. Note that calibTotal[9:0] is located at bit 4 in the VDL status */
+/* register. The fine rise and fall are no longer used, so add some definitions for just */
+/* the step setting to simplify things. */
+
+#define ddrcReg_PHY_BYTE_LANE_VDL_STATUS_STEP_SHIFT     8
+#define ddrcReg_PHY_BYTE_LANE_VDL_STATUS_STEP_MASK      (0x3f << ddrcReg_PHY_BYTE_LANE_VDL_STATUS_STEP_SHIFT)
+
+#define ddrcReg_PHY_BYTE_LANE_VDL_STATUS_TOTAL_SHIFT    4
+#define ddrcReg_PHY_BYTE_LANE_VDL_STATUS_TOTAL_MASK     (0x3ff << ddrcReg_PHY_BYTE_LANE_VDL_STATUS_TOTAL_SHIFT)
+
+#define ddrcReg_PHY_BYTE_LANE_VDL_STATUS_LOCK           (1 << 1)
+#define ddrcReg_PHY_BYTE_LANE_VDL_STATUS_IDLE           (1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_ENABLE            (1 << 16)
+
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_FALL_SHIFT        12
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_FALL_MASK         (0x3 << ddrcReg_PHY_BYTE_LANE_VDL_OVR_FALL_SHIFT)
+
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_RISE_SHIFT        8
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_RISE_MASK         (0x3 << ddrcReg_PHY_BYTE_LANE_VDL_OVR_RISE_SHIFT)
+
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_STEP_SHIFT        0
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_STEP_MASK         (0x3f << ddrcReg_PHY_BYTE_LANE_VDL_OVR_STEP_SHIFT)
+
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_IDX_STATIC_READ_DQS_P     0
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_IDX_STATIC_READ_DQS_N     1
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_IDX_STATIC_READ_EN        2
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_IDX_STATIC_WRITE_DQ_DQM   3
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_IDX_DYNAMIC_READ_DQS_P    4
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_IDX_DYNAMIC_READ_DQS_N    5
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_IDX_DYNAMIC_READ_EN       6
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_IDX_DYNAMIC_WRITE_DQ_DQM  7
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_BYTE_LANE_READ_CTL_DELAY_SHIFT      8
+#define ddrcReg_PHY_BYTE_LANE_READ_CTL_DELAY_MASK       (0x3 << ddrcReg_PHY_BYTE_LANE_READ_CTL_DELAY_SHIFT)
+
+#define ddrcReg_PHY_BYTE_LANE_READ_CTL_DQ_ODT_ENABLE    (1 << 3)
+#define ddrcReg_PHY_BYTE_LANE_READ_CTL_DQ_ODT_ADJUST    (1 << 2)
+#define ddrcReg_PHY_BYTE_LANE_READ_CTL_RD_ODT_ENABLE    (1 << 1)
+#define ddrcReg_PHY_BYTE_LANE_READ_CTL_RD_ODT_ADJUST    (1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_BYTE_LANE_READ_STATUS_ERROR_SHIFT   0
+#define ddrcReg_PHY_BYTE_LANE_READ_STATUS_ERROR_MASK    (0xf << ddrcReg_PHY_BYTE_LANE_READ_STATUS_ERROR_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_BYTE_LANE_READ_CLEAR_STATUS         (1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_ENABLE                   (1u << 31)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DM_RXENB_DISABLE         (1 << 19)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DM_IDDQ_DISABLE          (1 << 18)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DM_REB_DISABLE           (1 << 17)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DM_OEB_DISABLE           (1 << 16)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DQ_RXENB_DISABLE         (1 << 15)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DQ_IDDQ_DISABLE          (1 << 14)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DQ_REB_DISABLE           (1 << 13)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DQ_OEB_DISABLE           (1 << 12)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_READ_ENB_RXENB_DISABLE   (1 << 11)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_READ_ENB_IDDQ_DISABLE    (1 << 10)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_READ_ENB_REB_DISABLE     (1 << 9)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_READ_ENB_OEB_DISABLE     (1 << 8)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DQS_RXENB_DISABLE        (1 << 7)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DQS_IDDQ_DISABLE         (1 << 6)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DQS_REB_DISABLE          (1 << 5)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DQS_OEB_DISABLE          (1 << 4)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_CLK_RXENB_DISABLE        (1 << 3)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_CLK_IDDQ_DISABLE         (1 << 2)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_CLK_REB_DISABLE          (1 << 1)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_CLK_OEB_DISABLE          (1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_BYTE_LANE_PAD_DRIVE_CTL_RT60B_DDR_READ_ENB      (1 << 5)
+#define ddrcReg_PHY_BYTE_LANE_PAD_DRIVE_CTL_RT60B                   (1 << 4)
+#define ddrcReg_PHY_BYTE_LANE_PAD_DRIVE_CTL_SEL_SSTL18              (1 << 3)
+#define ddrcReg_PHY_BYTE_LANE_PAD_DRIVE_CTL_SELTXDRV_CI             (1 << 2)
+#define ddrcReg_PHY_BYTE_LANE_PAD_DRIVE_CTL_SELRXDRV                (1 << 1)
+#define ddrcReg_PHY_BYTE_LANE_PAD_DRIVE_CTL_SLEW                    (1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_BYTE_LANE_PAD_CLK_CTL_DISABLE                   (1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_BYTE_LANE_WRITE_CTL_PREAMBLE_DDR3               (1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_BYTE_LANE_CLK_REG_CTL_PWR_HALF                  (1 << 1)
+#define ddrcReg_PHY_BYTE_LANE_CLK_REG_CTL_PWR_OFF                   (1 << 0)
+
+/*********************************************************************/
+/* ARM PL341 DDRC to Broadcom DDR23 PHY glue register definitions */
+/*********************************************************************/
+
+	typedef struct {
+		uint32_t cfg;
+		uint32_t actMonCnt;
+		uint32_t ctl;
+		uint32_t lbistCtl;
+		uint32_t lbistSeed;
+		uint32_t lbistStatus;
+		uint32_t tieOff;
+		uint32_t actMonClear;
+		uint32_t status;
+		uint32_t user;
+	} ddrcReg_CTLR_PHY_GLUE_REG_t;
+
+#define ddrcReg_CTLR_PHY_GLUE_OFFSET                            0x0700
+#define ddrcReg_CTLR_PHY_GLUE_REGP                              ((volatile ddrcReg_CTLR_PHY_GLUE_REG_t *) (MM_IO_BASE_DDRC + ddrcReg_CTLR_PHY_GLUE_OFFSET))
+
+/* ----------------------------------------------------- */
+
+/* DDR2 / AXI block phase alignment interrupt control */
+#define ddrcReg_CTLR_PHY_GLUE_CFG_INT_SHIFT                     18
+#define ddrcReg_CTLR_PHY_GLUE_CFG_INT_MASK                      (0x3 << ddrcReg_CTLR_PHY_GLUE_CFG_INT_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_INT_OFF                       (0 << ddrcReg_CTLR_PHY_GLUE_CFG_INT_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_INT_ON_TIGHT                  (1 << ddrcReg_CTLR_PHY_GLUE_CFG_INT_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_INT_ON_MEDIUM                 (2 << ddrcReg_CTLR_PHY_GLUE_CFG_INT_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_INT_ON_LOOSE                  (3 << ddrcReg_CTLR_PHY_GLUE_CFG_INT_SHIFT)
+
+#define ddrcReg_CTLR_PHY_GLUE_CFG_PLL_REFCLK_SHIFT              17
+#define ddrcReg_CTLR_PHY_GLUE_CFG_PLL_REFCLK_MASK               (1 << ddrcReg_CTLR_PHY_GLUE_CFG_PLL_REFCLK_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_PLL_REFCLK_DIFFERENTIAL       (0 << ddrcReg_CTLR_PHY_GLUE_CFG_PLL_REFCLK_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_PLL_REFCLK_CMOS               (1 << ddrcReg_CTLR_PHY_GLUE_CFG_PLL_REFCLK_SHIFT)
+
+#define ddrcReg_CTLR_PHY_GLUE_CFG_DIV2CLK_TREE_SHIFT            16
+#define ddrcReg_CTLR_PHY_GLUE_CFG_DIV2CLK_TREE_MASK             (1 << ddrcReg_CTLR_PHY_GLUE_CFG_DIV2CLK_TREE_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_DIV2CLK_TREE_DEEP             (0 << ddrcReg_CTLR_PHY_GLUE_CFG_DIV2CLK_TREE_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_DIV2CLK_TREE_SHALLOW          (1 << ddrcReg_CTLR_PHY_GLUE_CFG_DIV2CLK_TREE_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_HW_FIXED_ALIGNMENT_DISABLED   ddrcReg_CTLR_PHY_GLUE_CFG_DIV2CLK_TREE_SHALLOW
+
+#define ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_SHIFT             15
+#define ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_MASK              (1 << ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_BP134             (0 << ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_PL301             (1 << ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_REGISTERED        ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_PL301
+
+/* Software control of PHY VDL updates from control register settings. Bit 13 enables the use of Bit 14. */
+/* If software control is not enabled, then updates occur when a refresh command is issued by the hardware */
+/* controller. If 2 chips selects are being used, then software control must be enabled. */
+#define ddrcReg_CTLR_PHY_GLUE_CFG_PHY_VDL_UPDATE_SW_CTL_LOAD    (1 << 14)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_PHY_VDL_UPDATE_SW_CTL_ENABLE  (1 << 13)
+
+/* Use these to bypass a pipeline stage. By default the ADDR is off but the BYTE LANE in / out are on. */
+#define ddrcReg_CTLR_PHY_GLUE_CFG_PHY_ADDR_CTL_IN_BYPASS_PIPELINE_STAGE (1 << 12)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_PHY_BYTE_LANE_IN_BYPASS_PIPELINE_STAGE (1 << 11)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_PHY_BYTE_LANE_OUT_BYPASS_PIPELINE_STAGE (1 << 10)
+
+/* Chip select count */
+#define ddrcReg_CTLR_PHY_GLUE_CFG_CS_CNT_SHIFT                  9
+#define ddrcReg_CTLR_PHY_GLUE_CFG_CS_CNT_MASK                   (1 << ddrcReg_CTLR_PHY_GLUE_CFG_CS_CNT_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_CS_CNT_1                      (0 << ddrcReg_CTLR_PHY_GLUE_CFG_CS_CNT_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_CS_CNT_2                      (1 << ddrcReg_CTLR_PHY_GLUE_CFG_CS_CNT_SHIFT)
+
+#define ddrcReg_CTLR_PHY_GLUE_CFG_CLK_SHIFT                     8
+#define ddrcReg_CTLR_PHY_GLUE_CFG_CLK_ASYNC                     (0 << ddrcReg_CTLR_PHY_GLUE_CFG_CLK_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_CLK_SYNC                      (1 << ddrcReg_CTLR_PHY_GLUE_CFG_CLK_SHIFT)
+
+#define ddrcReg_CTLR_PHY_GLUE_CFG_CKE_INIT_SHIFT                7
+#define ddrcReg_CTLR_PHY_GLUE_CFG_CKE_INIT_LOW                  (0 << ddrcReg_CTLR_PHY_GLUE_CFG_CKE_INIT_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_CKE_INIT_HIGH                 (1 << ddrcReg_CTLR_PHY_GLUE_CFG_CKE_INIT_SHIFT)
+
+#define ddrcReg_CTLR_PHY_GLUE_CFG_DQM_INIT_SHIFT                6
+#define ddrcReg_CTLR_PHY_GLUE_CFG_DQM_INIT_LOW                  (0 << ddrcReg_CTLR_PHY_GLUE_CFG_DQM_INIT_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_DQM_INIT_HIGH                 (1 << ddrcReg_CTLR_PHY_GLUE_CFG_DQM_INIT_SHIFT)
+
+#define ddrcReg_CTLR_PHY_GLUE_CFG_CAS_LATENCY_SHIFT             0
+#define ddrcReg_CTLR_PHY_GLUE_CFG_CAS_LATENCY_MASK              (0x7 << ddrcReg_CTLR_PHY_GLUE_CFG_CAS_LATENCY_SHIFT)
+
+/* ----------------------------------------------------- */
+#define ddrcReg_CTLR_PHY_GLUE_STATUS_PHASE_SHIFT                0
+#define ddrcReg_CTLR_PHY_GLUE_STATUS_PHASE_MASK                 (0x7f << ddrcReg_CTLR_PHY_GLUE_STATUS_PHASE_SHIFT)
+
+/* ---- Public Function Prototypes --------------------------------------- */
+
+#ifdef __cplusplus
+}				/* end extern "C" */
+#endif
+#endif				/* DDRC_REG_H */
diff --git a/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h b/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h
new file mode 100644
index 000000000000..375066ad0186
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h
@@ -0,0 +1,145 @@
+/*****************************************************************************
+* Copyright 2004 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*  @file    dmacHw_priv.h
+*
+*  @brief   Private Definitions for low level DMA driver
+*
+*/
+/****************************************************************************/
+
+#ifndef _DMACHW_PRIV_H
+#define _DMACHW_PRIV_H
+
+#include <csp/stdint.h>
+
+/* Data type for DMA Link List Item */
+typedef struct {
+	uint32_t sar;		/* Source Adress Register.
+				   Address must be aligned to CTLx.SRC_TR_WIDTH.             */
+	uint32_t dar;		/* Destination Address Register.
+				   Address must be aligned to CTLx.DST_TR_WIDTH.             */
+	uint32_t llpPhy;	/* LLP contains the physical address of the next descriptor for block chaining using linked lists.
+				   Address MUST be aligned to a 32-bit boundary.             */
+	dmacHw_REG64_t ctl;	/* Control Register. 64 bits */
+	uint32_t sstat;		/* Source Status Register */
+	uint32_t dstat;		/* Destination Status Register */
+	uint32_t devCtl;	/* Device specific control information */
+	uint32_t llp;		/* LLP contains the virtual address of the next descriptor for block chaining using linked lists. */
+} dmacHw_DESC_t;
+
+/*
+ *  Descriptor ring pointers
+ */
+typedef struct {
+	int num;		/* Number of link items */
+	dmacHw_DESC_t *pHead;	/* Head of descriptor ring (for writing) */
+	dmacHw_DESC_t *pTail;	/* Tail of descriptor ring (for reading) */
+	dmacHw_DESC_t *pProg;	/* Descriptor to program the channel (for programming the channel register) */
+	dmacHw_DESC_t *pEnd;	/* End of current descriptor chain */
+	dmacHw_DESC_t *pFree;	/* Descriptor to free memory (freeing dynamic memory) */
+	uint32_t virt2PhyOffset;	/* Virtual to physical address offset for the descriptor ring */
+} dmacHw_DESC_RING_t;
+
+/*
+ *  DMA channel control block
+ */
+typedef struct {
+	uint32_t module;	/* DMA controller module (0-1) */
+	uint32_t channel;	/* DMA channel (0-7) */
+	volatile uint32_t varDataStarted;	/* Flag indicating variable data channel is enabled */
+	volatile uint32_t descUpdated;	/* Flag to indicate descriptor update is complete */
+	void *userData;		/* Channel specifc user data */
+} dmacHw_CBLK_t;
+
+#define dmacHw_ASSERT(a)                  if (!(a)) while (1)
+#define dmacHw_MAX_CHANNEL_COUNT          16
+#define dmacHw_FREE_USER_MEMORY           0xFFFFFFFF
+#define dmacHw_DESC_FREE                  dmacHw_REG_CTL_DONE
+#define dmacHw_DESC_INIT                  ((dmacHw_DESC_t *) 0xFFFFFFFF)
+#define dmacHw_MAX_BLOCKSIZE              4064
+#define dmacHw_GET_DESC_RING(addr)        (dmacHw_DESC_RING_t *)(addr)
+#define dmacHw_ADDRESS_MASK(byte)         ((byte) - 1)
+#define dmacHw_NEXT_DESC(rp, dp)           ((rp)->dp = (dmacHw_DESC_t *)(rp)->dp->llp)
+#define dmacHw_HANDLE_TO_CBLK(handle)     ((dmacHw_CBLK_t *) (handle))
+#define dmacHw_CBLK_TO_HANDLE(cblkp)      ((dmacHw_HANDLE_t) (cblkp))
+#define dmacHw_DST_IS_MEMORY(tt)          (((tt) ==  dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM) || ((tt) == dmacHw_TRANSFER_TYPE_MEM_TO_MEM)) ? 1 : 0
+
+/****************************************************************************/
+/**
+*  @brief   Get next available transaction width
+*
+*
+*  @return  On sucess  : Next avail able transaction width
+*           On failure : dmacHw_TRANSACTION_WIDTH_8
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+static inline dmacHw_TRANSACTION_WIDTH_e dmacHw_GetNextTrWidth(dmacHw_TRANSACTION_WIDTH_e tw	/*   [ IN ] Current transaction width */
+    ) {
+	if (tw & dmacHw_REG_CTL_SRC_TR_WIDTH_MASK) {
+		return ((tw >> dmacHw_REG_CTL_SRC_TR_WIDTH_SHIFT) -
+			 1) << dmacHw_REG_CTL_SRC_TR_WIDTH_SHIFT;
+	} else if (tw & dmacHw_REG_CTL_DST_TR_WIDTH_MASK) {
+		return ((tw >> dmacHw_REG_CTL_DST_TR_WIDTH_SHIFT) -
+			 1) << dmacHw_REG_CTL_DST_TR_WIDTH_SHIFT;
+	}
+
+	/* Default return  */
+	return dmacHw_SRC_TRANSACTION_WIDTH_8;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Get number of bytes per transaction
+*
+*  @return  Number of bytes per transaction
+*
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+static inline int dmacHw_GetTrWidthInBytes(dmacHw_TRANSACTION_WIDTH_e tw	/*   [ IN ]  Transaction width */
+    ) {
+	int width = 1;
+	switch (tw) {
+	case dmacHw_SRC_TRANSACTION_WIDTH_8:
+		width = 1;
+		break;
+	case dmacHw_SRC_TRANSACTION_WIDTH_16:
+	case dmacHw_DST_TRANSACTION_WIDTH_16:
+		width = 2;
+		break;
+	case dmacHw_SRC_TRANSACTION_WIDTH_32:
+	case dmacHw_DST_TRANSACTION_WIDTH_32:
+		width = 4;
+		break;
+	case dmacHw_SRC_TRANSACTION_WIDTH_64:
+	case dmacHw_DST_TRANSACTION_WIDTH_64:
+		width = 8;
+		break;
+	default:
+		dmacHw_ASSERT(0);
+	}
+
+	/* Default transaction width */
+	return width;
+}
+
+#endif /* _DMACHW_PRIV_H */
diff --git a/arch/arm/mach-bcmring/include/mach/csp/dmacHw_reg.h b/arch/arm/mach-bcmring/include/mach/csp/dmacHw_reg.h
new file mode 100644
index 000000000000..891cea87e333
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/dmacHw_reg.h
@@ -0,0 +1,406 @@
+/*****************************************************************************
+* Copyright 2004 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*  @file    dmacHw_reg.h
+*
+*  @brief   Definitions for low level DMA registers
+*
+*/
+/****************************************************************************/
+
+#ifndef _DMACHW_REG_H
+#define _DMACHW_REG_H
+
+#include <csp/stdint.h>
+#include <mach/csp/mm_io.h>
+
+/* Data type for 64 bit little endian register */
+typedef struct {
+	volatile uint32_t lo;	/* Lower 32 bit in little endian mode */
+	volatile uint32_t hi;	/* Upper 32 bit in little endian mode */
+} dmacHw_REG64_t;
+
+/* Data type representing DMA channel registers */
+typedef struct {
+	dmacHw_REG64_t ChannelSar;	/*  Source Adress Register. 64 bits (upper 32 bits are reserved)
+					   Address must be aligned to CTLx.SRC_TR_WIDTH.
+					 */
+	dmacHw_REG64_t ChannelDar;	/*  Destination Address Register.64 bits (upper 32 bits are reserved)
+					   Address must be aligned to CTLx.DST_TR_WIDTH.
+					 */
+	dmacHw_REG64_t ChannelLlp;	/*  Link List Pointer.64 bits (upper 32 bits are reserved)
+					   LLP contains the pointer to the next LLI for block chaining using linked lists.
+					   If LLPis set to 0x0, then transfers using linked lists are not enabled.
+					   Address MUST be aligned to a 32-bit boundary.
+					 */
+	dmacHw_REG64_t ChannelCtl;	/* Control Register. 64 bits */
+	dmacHw_REG64_t ChannelSstat;	/* Source Status Register */
+	dmacHw_REG64_t ChannelDstat;	/* Destination Status Register */
+	dmacHw_REG64_t ChannelSstatAddr;	/* Source Status Address Register */
+	dmacHw_REG64_t ChannelDstatAddr;	/* Destination Status Address Register */
+	dmacHw_REG64_t ChannelConfig;	/* Channel Configuration Register */
+	dmacHw_REG64_t SrcGather;	/* Source gather register */
+	dmacHw_REG64_t DstScatter;	/* Destination scatter register */
+} dmacHw_CH_REG_t;
+
+/* Data type for RAW interrupt status registers */
+typedef struct {
+	dmacHw_REG64_t RawTfr;	/* Raw Status for IntTfr Interrupt */
+	dmacHw_REG64_t RawBlock;	/* Raw Status for IntBlock Interrupt */
+	dmacHw_REG64_t RawSrcTran;	/* Raw Status for IntSrcTran Interrupt */
+	dmacHw_REG64_t RawDstTran;	/* Raw Status for IntDstTran Interrupt */
+	dmacHw_REG64_t RawErr;	/* Raw Status for IntErr Interrupt */
+} dmacHw_INT_RAW_t;
+
+/* Data type for interrupt status registers */
+typedef struct {
+	dmacHw_REG64_t StatusTfr;	/* Status for IntTfr Interrupt */
+	dmacHw_REG64_t StatusBlock;	/* Status for IntBlock Interrupt */
+	dmacHw_REG64_t StatusSrcTran;	/* Status for IntSrcTran Interrupt */
+	dmacHw_REG64_t StatusDstTran;	/* Status for IntDstTran Interrupt */
+	dmacHw_REG64_t StatusErr;	/* Status for IntErr Interrupt */
+} dmacHw_INT_STATUS_t;
+
+/* Data type for interrupt mask registers*/
+typedef struct {
+	dmacHw_REG64_t MaskTfr;	/* Mask for IntTfr Interrupt */
+	dmacHw_REG64_t MaskBlock;	/* Mask for IntBlock Interrupt */
+	dmacHw_REG64_t MaskSrcTran;	/* Mask for IntSrcTran Interrupt */
+	dmacHw_REG64_t MaskDstTran;	/* Mask for IntDstTran Interrupt */
+	dmacHw_REG64_t MaskErr;	/* Mask for IntErr Interrupt */
+} dmacHw_INT_MASK_t;
+
+/* Data type for interrupt clear registers */
+typedef struct {
+	dmacHw_REG64_t ClearTfr;	/* Clear for IntTfr Interrupt */
+	dmacHw_REG64_t ClearBlock;	/* Clear for IntBlock Interrupt */
+	dmacHw_REG64_t ClearSrcTran;	/* Clear for IntSrcTran Interrupt */
+	dmacHw_REG64_t ClearDstTran;	/* Clear for IntDstTran Interrupt */
+	dmacHw_REG64_t ClearErr;	/* Clear for IntErr Interrupt */
+	dmacHw_REG64_t StatusInt;	/* Status for each interrupt type */
+} dmacHw_INT_CLEAR_t;
+
+/* Data type for software handshaking registers */
+typedef struct {
+	dmacHw_REG64_t ReqSrcReg;	/* Source Software Transaction Request Register */
+	dmacHw_REG64_t ReqDstReg;	/* Destination Software Transaction Request Register */
+	dmacHw_REG64_t SglReqSrcReg;	/* Single Source Transaction Request Register */
+	dmacHw_REG64_t SglReqDstReg;	/* Single Destination Transaction Request Register */
+	dmacHw_REG64_t LstSrcReg;	/* Last Source Transaction Request Register */
+	dmacHw_REG64_t LstDstReg;	/* Last Destination Transaction Request Register */
+} dmacHw_SW_HANDSHAKE_t;
+
+/* Data type for misc. registers */
+typedef struct {
+	dmacHw_REG64_t DmaCfgReg;	/* DMA Configuration Register */
+	dmacHw_REG64_t ChEnReg;	/* DMA Channel Enable Register */
+	dmacHw_REG64_t DmaIdReg;	/* DMA ID Register */
+	dmacHw_REG64_t DmaTestReg;	/* DMA Test Register */
+	dmacHw_REG64_t Reserved0;	/* Reserved */
+	dmacHw_REG64_t Reserved1;	/* Reserved */
+	dmacHw_REG64_t CompParm6;	/* Component Parameter 6 */
+	dmacHw_REG64_t CompParm5;	/* Component Parameter 5 */
+	dmacHw_REG64_t CompParm4;	/* Component Parameter 4 */
+	dmacHw_REG64_t CompParm3;	/* Component Parameter 3 */
+	dmacHw_REG64_t CompParm2;	/* Component Parameter 2 */
+	dmacHw_REG64_t CompParm1;	/* Component Parameter 1 */
+	dmacHw_REG64_t CompId;	/* Compoent ID */
+} dmacHw_MISC_t;
+
+/* Base registers */
+#define dmacHw_0_MODULE_BASE_ADDR        (char *) MM_IO_BASE_DMA0	/* DMAC 0 module's base address */
+#define dmacHw_1_MODULE_BASE_ADDR        (char *) MM_IO_BASE_DMA1	/* DMAC 1 module's base address */
+
+extern uint32_t dmaChannelCount_0;
+extern uint32_t dmaChannelCount_1;
+
+/* Define channel specific registers */
+#define dmacHw_CHAN_BASE(module, chan)          ((dmacHw_CH_REG_t *) ((char *)((module) ? dmacHw_1_MODULE_BASE_ADDR : dmacHw_0_MODULE_BASE_ADDR) + ((chan) * sizeof(dmacHw_CH_REG_t))))
+
+/* Raw interrupt status registers */
+#define dmacHw_REG_INT_RAW_BASE(module)         ((char *)dmacHw_CHAN_BASE((module), ((module) ? dmaChannelCount_1 : dmaChannelCount_0)))
+#define dmacHw_REG_INT_RAW_TRAN(module)         (((dmacHw_INT_RAW_t *) dmacHw_REG_INT_RAW_BASE((module)))->RawTfr.lo)
+#define dmacHw_REG_INT_RAW_BLOCK(module)        (((dmacHw_INT_RAW_t *) dmacHw_REG_INT_RAW_BASE((module)))->RawBlock.lo)
+#define dmacHw_REG_INT_RAW_STRAN(module)        (((dmacHw_INT_RAW_t *) dmacHw_REG_INT_RAW_BASE((module)))->RawSrcTran.lo)
+#define dmacHw_REG_INT_RAW_DTRAN(module)        (((dmacHw_INT_RAW_t *) dmacHw_REG_INT_RAW_BASE((module)))->RawDstTran.lo)
+#define dmacHw_REG_INT_RAW_ERROR(module)        (((dmacHw_INT_RAW_t *) dmacHw_REG_INT_RAW_BASE((module)))->RawErr.lo)
+
+/* Interrupt status registers */
+#define dmacHw_REG_INT_STAT_BASE(module)        ((char *)(dmacHw_REG_INT_RAW_BASE((module)) + sizeof(dmacHw_INT_RAW_t)))
+#define dmacHw_REG_INT_STAT_TRAN(module)        (((dmacHw_INT_STATUS_t *) dmacHw_REG_INT_STAT_BASE((module)))->StatusTfr.lo)
+#define dmacHw_REG_INT_STAT_BLOCK(module)       (((dmacHw_INT_STATUS_t *) dmacHw_REG_INT_STAT_BASE((module)))->StatusBlock.lo)
+#define dmacHw_REG_INT_STAT_STRAN(module)       (((dmacHw_INT_STATUS_t *) dmacHw_REG_INT_STAT_BASE((module)))->StatusSrcTran.lo)
+#define dmacHw_REG_INT_STAT_DTRAN(module)       (((dmacHw_INT_STATUS_t *) dmacHw_REG_INT_STAT_BASE((module)))->StatusDstTran.lo)
+#define dmacHw_REG_INT_STAT_ERROR(module)       (((dmacHw_INT_STATUS_t *) dmacHw_REG_INT_STAT_BASE((module)))->StatusErr.lo)
+
+/* Interrupt status registers */
+#define dmacHw_REG_INT_MASK_BASE(module)        ((char *)(dmacHw_REG_INT_STAT_BASE((module)) + sizeof(dmacHw_INT_STATUS_t)))
+#define dmacHw_REG_INT_MASK_TRAN(module)        (((dmacHw_INT_MASK_t *) dmacHw_REG_INT_MASK_BASE((module)))->MaskTfr.lo)
+#define dmacHw_REG_INT_MASK_BLOCK(module)       (((dmacHw_INT_MASK_t *) dmacHw_REG_INT_MASK_BASE((module)))->MaskBlock.lo)
+#define dmacHw_REG_INT_MASK_STRAN(module)       (((dmacHw_INT_MASK_t *) dmacHw_REG_INT_MASK_BASE((module)))->MaskSrcTran.lo)
+#define dmacHw_REG_INT_MASK_DTRAN(module)       (((dmacHw_INT_MASK_t *) dmacHw_REG_INT_MASK_BASE((module)))->MaskDstTran.lo)
+#define dmacHw_REG_INT_MASK_ERROR(module)       (((dmacHw_INT_MASK_t *) dmacHw_REG_INT_MASK_BASE((module)))->MaskErr.lo)
+
+/* Interrupt clear registers */
+#define dmacHw_REG_INT_CLEAR_BASE(module)       ((char *)(dmacHw_REG_INT_MASK_BASE((module)) + sizeof(dmacHw_INT_MASK_t)))
+#define dmacHw_REG_INT_CLEAR_TRAN(module)       (((dmacHw_INT_CLEAR_t *) dmacHw_REG_INT_CLEAR_BASE((module)))->ClearTfr.lo)
+#define dmacHw_REG_INT_CLEAR_BLOCK(module)      (((dmacHw_INT_CLEAR_t *) dmacHw_REG_INT_CLEAR_BASE((module)))->ClearBlock.lo)
+#define dmacHw_REG_INT_CLEAR_STRAN(module)      (((dmacHw_INT_CLEAR_t *) dmacHw_REG_INT_CLEAR_BASE((module)))->ClearSrcTran.lo)
+#define dmacHw_REG_INT_CLEAR_DTRAN(module)      (((dmacHw_INT_CLEAR_t *) dmacHw_REG_INT_CLEAR_BASE((module)))->ClearDstTran.lo)
+#define dmacHw_REG_INT_CLEAR_ERROR(module)      (((dmacHw_INT_CLEAR_t *) dmacHw_REG_INT_CLEAR_BASE((module)))->ClearErr.lo)
+#define dmacHw_REG_INT_STATUS(module)           (((dmacHw_INT_CLEAR_t *) dmacHw_REG_INT_CLEAR_BASE((module)))->StatusInt.lo)
+
+/* Software handshaking registers */
+#define dmacHw_REG_SW_HS_BASE(module)           ((char *)(dmacHw_REG_INT_CLEAR_BASE((module)) + sizeof(dmacHw_INT_CLEAR_t)))
+#define dmacHw_REG_SW_HS_SRC_REQ(module)        (((dmacHw_SW_HANDSHAKE_t *) dmacHw_REG_SW_HS_BASE((module)))->ReqSrcReg.lo)
+#define dmacHw_REG_SW_HS_DST_REQ(module)        (((dmacHw_SW_HANDSHAKE_t *) dmacHw_REG_SW_HS_BASE((module)))->ReqDstReg.lo)
+#define dmacHw_REG_SW_HS_SRC_SGL_REQ(module)    (((dmacHw_SW_HANDSHAKE_t *) dmacHw_REG_SW_HS_BASE((module)))->SglReqSrcReg.lo)
+#define dmacHw_REG_SW_HS_DST_SGL_REQ(module)    (((dmacHw_SW_HANDSHAKE_t *) dmacHw_REG_SW_HS_BASE((module)))->SglReqDstReg.lo)
+#define dmacHw_REG_SW_HS_SRC_LST_REQ(module)    (((dmacHw_SW_HANDSHAKE_t *) dmacHw_REG_SW_HS_BASE((module)))->LstSrcReg.lo)
+#define dmacHw_REG_SW_HS_DST_LST_REQ(module)    (((dmacHw_SW_HANDSHAKE_t *) dmacHw_REG_SW_HS_BASE((module)))->LstDstReg.lo)
+
+/* Miscellaneous registers */
+#define dmacHw_REG_MISC_BASE(module)            ((char *)(dmacHw_REG_SW_HS_BASE((module)) + sizeof(dmacHw_SW_HANDSHAKE_t)))
+#define dmacHw_REG_MISC_CFG(module)             (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->DmaCfgReg.lo)
+#define dmacHw_REG_MISC_CH_ENABLE(module)       (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->ChEnReg.lo)
+#define dmacHw_REG_MISC_ID(module)              (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->DmaIdReg.lo)
+#define dmacHw_REG_MISC_TEST(module)            (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->DmaTestReg.lo)
+#define dmacHw_REG_MISC_COMP_PARAM1_LO(module)  (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm1.lo)
+#define dmacHw_REG_MISC_COMP_PARAM1_HI(module)  (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm1.hi)
+#define dmacHw_REG_MISC_COMP_PARAM2_LO(module)  (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm2.lo)
+#define dmacHw_REG_MISC_COMP_PARAM2_HI(module)  (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm2.hi)
+#define dmacHw_REG_MISC_COMP_PARAM3_LO(module)  (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm3.lo)
+#define dmacHw_REG_MISC_COMP_PARAM3_HI(module)  (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm3.hi)
+#define dmacHw_REG_MISC_COMP_PARAM4_LO(module)  (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm4.lo)
+#define dmacHw_REG_MISC_COMP_PARAM4_HI(module)  (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm4.hi)
+#define dmacHw_REG_MISC_COMP_PARAM5_LO(module)  (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm5.lo)
+#define dmacHw_REG_MISC_COMP_PARAM5_HI(module)  (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm5.hi)
+#define dmacHw_REG_MISC_COMP_PARAM6_LO(module)  (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm6.lo)
+#define dmacHw_REG_MISC_COMP_PARAM6_HI(module)  (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm6.hi)
+
+/* Channel control registers */
+#define dmacHw_REG_SAR(module, chan)            (dmacHw_CHAN_BASE((module), (chan))->ChannelSar.lo)
+#define dmacHw_REG_DAR(module, chan)            (dmacHw_CHAN_BASE((module), (chan))->ChannelDar.lo)
+#define dmacHw_REG_LLP(module, chan)            (dmacHw_CHAN_BASE((module), (chan))->ChannelLlp.lo)
+
+#define dmacHw_REG_CTL_LO(module, chan)         (dmacHw_CHAN_BASE((module), (chan))->ChannelCtl.lo)
+#define dmacHw_REG_CTL_HI(module, chan)         (dmacHw_CHAN_BASE((module), (chan))->ChannelCtl.hi)
+
+#define dmacHw_REG_SSTAT(module, chan)          (dmacHw_CHAN_BASE((module), (chan))->ChannelSstat.lo)
+#define dmacHw_REG_DSTAT(module, chan)          (dmacHw_CHAN_BASE((module), (chan))->ChannelDstat.lo)
+#define dmacHw_REG_SSTATAR(module, chan)        (dmacHw_CHAN_BASE((module), (chan))->ChannelSstatAddr.lo)
+#define dmacHw_REG_DSTATAR(module, chan)        (dmacHw_CHAN_BASE((module), (chan))->ChannelDstatAddr.lo)
+
+#define dmacHw_REG_CFG_LO(module, chan)         (dmacHw_CHAN_BASE((module), (chan))->ChannelConfig.lo)
+#define dmacHw_REG_CFG_HI(module, chan)         (dmacHw_CHAN_BASE((module), (chan))->ChannelConfig.hi)
+
+#define dmacHw_REG_SGR_LO(module, chan)         (dmacHw_CHAN_BASE((module), (chan))->SrcGather.lo)
+#define dmacHw_REG_SGR_HI(module, chan)         (dmacHw_CHAN_BASE((module), (chan))->SrcGather.hi)
+
+#define dmacHw_REG_DSR_LO(module, chan)         (dmacHw_CHAN_BASE((module), (chan))->DstScatter.lo)
+#define dmacHw_REG_DSR_HI(module, chan)         (dmacHw_CHAN_BASE((module), (chan))->DstScatter.hi)
+
+#define INT_STATUS_MASK(channel)                (0x00000001 << (channel))
+#define CHANNEL_BUSY(mod, channel)              (dmacHw_REG_MISC_CH_ENABLE((mod)) & (0x00000001 << (channel)))
+
+/* Bit mask for REG_DMACx_CTL_LO */
+
+#define dmacHw_REG_CTL_INT_EN                       0x00000001	/* Channel interrupt enable */
+
+#define dmacHw_REG_CTL_DST_TR_WIDTH_MASK            0x0000000E	/* Destination transaction width mask */
+#define dmacHw_REG_CTL_DST_TR_WIDTH_SHIFT           1
+#define dmacHw_REG_CTL_DST_TR_WIDTH_8               0x00000000	/* Destination transaction width 8 bit */
+#define dmacHw_REG_CTL_DST_TR_WIDTH_16              0x00000002	/* Destination transaction width 16 bit */
+#define dmacHw_REG_CTL_DST_TR_WIDTH_32              0x00000004	/* Destination transaction width 32 bit */
+#define dmacHw_REG_CTL_DST_TR_WIDTH_64              0x00000006	/* Destination transaction width 64 bit */
+
+#define dmacHw_REG_CTL_SRC_TR_WIDTH_MASK            0x00000070	/* Source transaction width mask */
+#define dmacHw_REG_CTL_SRC_TR_WIDTH_SHIFT           4
+#define dmacHw_REG_CTL_SRC_TR_WIDTH_8               0x00000000	/* Source transaction width 8 bit */
+#define dmacHw_REG_CTL_SRC_TR_WIDTH_16              0x00000010	/* Source transaction width 16 bit */
+#define dmacHw_REG_CTL_SRC_TR_WIDTH_32              0x00000020	/* Source transaction width 32 bit */
+#define dmacHw_REG_CTL_SRC_TR_WIDTH_64              0x00000030	/* Source transaction width 64 bit */
+
+#define dmacHw_REG_CTL_DS_ENABLE                    0x00040000	/* Destination scatter enable */
+#define dmacHw_REG_CTL_SG_ENABLE                    0x00020000	/* Source gather enable */
+
+#define dmacHw_REG_CTL_DINC_MASK                    0x00000180	/* Destination address inc/dec mask */
+#define dmacHw_REG_CTL_DINC_INC                     0x00000000	/* Destination address increment */
+#define dmacHw_REG_CTL_DINC_DEC                     0x00000080	/* Destination address decrement */
+#define dmacHw_REG_CTL_DINC_NC                      0x00000100	/* Destination address no change */
+
+#define dmacHw_REG_CTL_SINC_MASK                    0x00000600	/* Source address inc/dec mask */
+#define dmacHw_REG_CTL_SINC_INC                     0x00000000	/* Source address increment */
+#define dmacHw_REG_CTL_SINC_DEC                     0x00000200	/* Source address decrement */
+#define dmacHw_REG_CTL_SINC_NC                      0x00000400	/* Source address no change */
+
+#define dmacHw_REG_CTL_DST_MSIZE_MASK               0x00003800	/* Destination burst transaction length */
+#define dmacHw_REG_CTL_DST_MSIZE_0                  0x00000000	/* No Destination burst */
+#define dmacHw_REG_CTL_DST_MSIZE_4                  0x00000800	/* Destination burst transaction length 4 */
+#define dmacHw_REG_CTL_DST_MSIZE_8                  0x00001000	/* Destination burst transaction length 8 */
+#define dmacHw_REG_CTL_DST_MSIZE_16                 0x00001800	/* Destination burst transaction length 16 */
+
+#define dmacHw_REG_CTL_SRC_MSIZE_MASK               0x0001C000	/* Source burst transaction length */
+#define dmacHw_REG_CTL_SRC_MSIZE_0                  0x00000000	/* No Source burst */
+#define dmacHw_REG_CTL_SRC_MSIZE_4                  0x00004000	/* Source burst transaction length 4 */
+#define dmacHw_REG_CTL_SRC_MSIZE_8                  0x00008000	/* Source burst transaction length 8 */
+#define dmacHw_REG_CTL_SRC_MSIZE_16                 0x0000C000	/* Source burst transaction length 16 */
+
+#define dmacHw_REG_CTL_TTFC_MASK                    0x00700000	/* Transfer type and flow controller */
+#define dmacHw_REG_CTL_TTFC_MM_DMAC                 0x00000000	/* Memory to Memory with DMAC as flow controller */
+#define dmacHw_REG_CTL_TTFC_MP_DMAC                 0x00100000	/* Memory to Peripheral with DMAC as flow controller */
+#define dmacHw_REG_CTL_TTFC_PM_DMAC                 0x00200000	/* Peripheral to Memory with DMAC as flow controller */
+#define dmacHw_REG_CTL_TTFC_PP_DMAC                 0x00300000	/* Peripheral to Peripheral with DMAC as flow controller */
+#define dmacHw_REG_CTL_TTFC_PM_PERI                 0x00400000	/* Peripheral to Memory with Peripheral as flow controller */
+#define dmacHw_REG_CTL_TTFC_PP_SPERI                0x00500000	/* Peripheral to Peripheral with Source Peripheral as flow controller */
+#define dmacHw_REG_CTL_TTFC_MP_PERI                 0x00600000	/* Memory to Peripheral with Peripheral as flow controller */
+#define dmacHw_REG_CTL_TTFC_PP_DPERI                0x00700000	/* Peripheral to Peripheral with Destination Peripheral as flow controller */
+
+#define dmacHw_REG_CTL_DMS_MASK                     0x01800000	/* Destination AHB master interface */
+#define dmacHw_REG_CTL_DMS_1                        0x00000000	/* Destination AHB master interface 1 */
+#define dmacHw_REG_CTL_DMS_2                        0x00800000	/* Destination AHB master interface 2 */
+
+#define dmacHw_REG_CTL_SMS_MASK                     0x06000000	/* Source AHB master interface */
+#define dmacHw_REG_CTL_SMS_1                        0x00000000	/* Source AHB master interface 1 */
+#define dmacHw_REG_CTL_SMS_2                        0x02000000	/* Source AHB master interface 2 */
+
+#define dmacHw_REG_CTL_LLP_DST_EN                   0x08000000	/* Block chaining enable for destination side */
+#define dmacHw_REG_CTL_LLP_SRC_EN                   0x10000000	/* Block chaining enable for source side */
+
+/* Bit mask for REG_DMACx_CTL_HI */
+#define dmacHw_REG_CTL_BLOCK_TS_MASK                0x00000FFF	/* Block transfer size */
+#define dmacHw_REG_CTL_DONE                         0x00001000	/* Block trasnfer done */
+
+/* Bit mask for REG_DMACx_CFG_LO */
+#define dmacHw_REG_CFG_LO_CH_PRIORITY_SHIFT                  5	/* Channel priority shift */
+#define dmacHw_REG_CFG_LO_CH_PRIORITY_MASK          0x000000E0	/* Channel priority mask */
+#define dmacHw_REG_CFG_LO_CH_PRIORITY_0             0x00000000	/* Channel priority 0 */
+#define dmacHw_REG_CFG_LO_CH_PRIORITY_1             0x00000020	/* Channel priority 1 */
+#define dmacHw_REG_CFG_LO_CH_PRIORITY_2             0x00000040	/* Channel priority 2 */
+#define dmacHw_REG_CFG_LO_CH_PRIORITY_3             0x00000060	/* Channel priority 3 */
+#define dmacHw_REG_CFG_LO_CH_PRIORITY_4             0x00000080	/* Channel priority 4 */
+#define dmacHw_REG_CFG_LO_CH_PRIORITY_5             0x000000A0	/* Channel priority 5 */
+#define dmacHw_REG_CFG_LO_CH_PRIORITY_6             0x000000C0	/* Channel priority 6 */
+#define dmacHw_REG_CFG_LO_CH_PRIORITY_7             0x000000E0	/* Channel priority 7 */
+
+#define dmacHw_REG_CFG_LO_CH_SUSPEND                0x00000100	/* Channel suspend */
+#define dmacHw_REG_CFG_LO_CH_FIFO_EMPTY             0x00000200	/* Channel FIFO empty */
+#define dmacHw_REG_CFG_LO_DST_CH_SW_HS              0x00000400	/* Destination channel SW handshaking */
+#define dmacHw_REG_CFG_LO_SRC_CH_SW_HS              0x00000800	/* Source channel SW handshaking */
+
+#define dmacHw_REG_CFG_LO_CH_LOCK_MASK              0x00003000	/* Channel locking mask */
+#define dmacHw_REG_CFG_LO_CH_LOCK_DMA               0x00000000	/* Channel lock over the entire DMA transfer operation */
+#define dmacHw_REG_CFG_LO_CH_LOCK_BLOCK             0x00001000	/* Channel lock over the block transfer operation */
+#define dmacHw_REG_CFG_LO_CH_LOCK_TRANS             0x00002000	/* Channel lock over the transaction */
+#define dmacHw_REG_CFG_LO_CH_LOCK_ENABLE            0x00010000	/* Channel lock enable */
+
+#define dmacHw_REG_CFG_LO_BUS_LOCK_MASK             0x0000C000	/* Bus locking mask */
+#define dmacHw_REG_CFG_LO_BUS_LOCK_DMA              0x00000000	/* Bus lock over the entire DMA transfer operation */
+#define dmacHw_REG_CFG_LO_BUS_LOCK_BLOCK            0x00004000	/* Bus lock over the block transfer operation */
+#define dmacHw_REG_CFG_LO_BUS_LOCK_TRANS            0x00008000	/* Bus lock over the transaction */
+#define dmacHw_REG_CFG_LO_BUS_LOCK_ENABLE           0x00020000	/* Bus lock enable */
+
+#define dmacHw_REG_CFG_LO_DST_HS_POLARITY_LOW       0x00040000	/* Destination channel handshaking signal polarity low */
+#define dmacHw_REG_CFG_LO_SRC_HS_POLARITY_LOW       0x00080000	/* Source channel handshaking signal polarity low */
+
+#define dmacHw_REG_CFG_LO_MAX_AMBA_BURST_LEN_MASK   0x3FF00000	/* Maximum AMBA burst length */
+
+#define dmacHw_REG_CFG_LO_AUTO_RELOAD_SRC           0x40000000	/* Source address auto reload */
+#define dmacHw_REG_CFG_LO_AUTO_RELOAD_DST           0x80000000	/* Destination address auto reload */
+
+/* Bit mask for REG_DMACx_CFG_HI */
+#define dmacHw_REG_CFG_HI_FC_DST_READY              0x00000001	/* Source transaction request is serviced when destination is ready */
+#define dmacHw_REG_CFG_HI_FIFO_ENOUGH               0x00000002	/* Initiate burst transaction when enough data in available in FIFO */
+
+#define dmacHw_REG_CFG_HI_AHB_HPROT_MASK            0x0000001C	/* AHB protection mask */
+#define dmacHw_REG_CFG_HI_AHB_HPROT_1               0x00000004	/* AHB protection 1 */
+#define dmacHw_REG_CFG_HI_AHB_HPROT_2               0x00000008	/* AHB protection 2 */
+#define dmacHw_REG_CFG_HI_AHB_HPROT_3               0x00000010	/* AHB protection 3 */
+
+#define dmacHw_REG_CFG_HI_UPDATE_DST_STAT           0x00000020	/* Destination status update enable */
+#define dmacHw_REG_CFG_HI_UPDATE_SRC_STAT           0x00000040	/* Source status update enable */
+
+#define dmacHw_REG_CFG_HI_SRC_PERI_INTF_MASK        0x00000780	/* Source peripheral hardware interface mask */
+#define dmacHw_REG_CFG_HI_DST_PERI_INTF_MASK        0x00007800	/* Destination peripheral hardware interface mask */
+
+/* DMA Configuration Parameters */
+#define dmacHw_REG_COMP_PARAM_NUM_CHANNELS          0x00000700	/* Number of channels */
+#define dmacHw_REG_COMP_PARAM_NUM_INTERFACE         0x00001800	/* Number of master interface */
+#define dmacHw_REG_COMP_PARAM_MAX_BLK_SIZE          0x0000000f	/* Maximum brust size */
+#define dmacHw_REG_COMP_PARAM_DATA_WIDTH            0x00006000	/* Data transfer width */
+
+/* Define GET/SET macros to program the registers */
+#define dmacHw_SET_SAR(module, channel, addr)          (dmacHw_REG_SAR((module), (channel)) = (uint32_t) (addr))
+#define dmacHw_SET_DAR(module, channel, addr)          (dmacHw_REG_DAR((module), (channel)) = (uint32_t) (addr))
+#define dmacHw_SET_LLP(module, channel, ptr)           (dmacHw_REG_LLP((module), (channel)) = (uint32_t) (ptr))
+
+#define dmacHw_GET_SSTAT(module, channel)              (dmacHw_REG_SSTAT((module), (channel)))
+#define dmacHw_GET_DSTAT(module, channel)              (dmacHw_REG_DSTAT((module), (channel)))
+
+#define dmacHw_SET_SSTATAR(module, channel, addr)      (dmacHw_REG_SSTATAR((module), (channel)) = (uint32_t) (addr))
+#define dmacHw_SET_DSTATAR(module, channel, addr)      (dmacHw_REG_DSTATAR((module), (channel)) = (uint32_t) (addr))
+
+#define dmacHw_SET_CONTROL_LO(module, channel, ctl)    (dmacHw_REG_CTL_LO((module), (channel)) |= (ctl))
+#define dmacHw_RESET_CONTROL_LO(module, channel)       (dmacHw_REG_CTL_LO((module), (channel)) = 0)
+#define dmacHw_GET_CONTROL_LO(module, channel)         (dmacHw_REG_CTL_LO((module), (channel)))
+
+#define dmacHw_SET_CONTROL_HI(module, channel, ctl)    (dmacHw_REG_CTL_HI((module), (channel)) |= (ctl))
+#define dmacHw_RESET_CONTROL_HI(module, channel)       (dmacHw_REG_CTL_HI((module), (channel)) = 0)
+#define dmacHw_GET_CONTROL_HI(module, channel)         (dmacHw_REG_CTL_HI((module), (channel)))
+
+#define dmacHw_GET_BLOCK_SIZE(module, channel)         (dmacHw_REG_CTL_HI((module), (channel)) & dmacHw_REG_CTL_BLOCK_TS_MASK)
+#define dmacHw_DMA_COMPLETE(module, channel)           (dmacHw_REG_CTL_HI((module), (channel)) & dmacHw_REG_CTL_DONE)
+
+#define dmacHw_SET_CONFIG_LO(module, channel, cfg)     (dmacHw_REG_CFG_LO((module), (channel)) |= (cfg))
+#define dmacHw_RESET_CONFIG_LO(module, channel)        (dmacHw_REG_CFG_LO((module), (channel)) = 0)
+#define dmacHw_GET_CONFIG_LO(module, channel)          (dmacHw_REG_CFG_LO((module), (channel)))
+#define dmacHw_SET_AMBA_BUSRT_LEN(module, channel, len)    (dmacHw_REG_CFG_LO((module), (channel)) = (dmacHw_REG_CFG_LO((module), (channel)) & ~(dmacHw_REG_CFG_LO_MAX_AMBA_BURST_LEN_MASK)) | (((len) << 20) & dmacHw_REG_CFG_LO_MAX_AMBA_BURST_LEN_MASK))
+#define dmacHw_SET_CHANNEL_PRIORITY(module, channel, prio) (dmacHw_REG_CFG_LO((module), (channel)) = (dmacHw_REG_CFG_LO((module), (channel)) & ~(dmacHw_REG_CFG_LO_CH_PRIORITY_MASK)) | (prio))
+#define dmacHw_SET_AHB_HPROT(module, channel, protect)  (dmacHw_REG_CFG_HI(module, channel) = (dmacHw_REG_CFG_HI((module), (channel)) & ~(dmacHw_REG_CFG_HI_AHB_HPROT_MASK)) | (protect))
+
+#define dmacHw_SET_CONFIG_HI(module, channel, cfg)      (dmacHw_REG_CFG_HI((module), (channel)) |= (cfg))
+#define dmacHw_RESET_CONFIG_HI(module, channel)         (dmacHw_REG_CFG_HI((module), (channel)) = 0)
+#define dmacHw_GET_CONFIG_HI(module, channel)           (dmacHw_REG_CFG_HI((module), (channel)))
+#define dmacHw_SET_SRC_PERI_INTF(module, channel, intf) (dmacHw_REG_CFG_HI((module), (channel)) = (dmacHw_REG_CFG_HI((module), (channel)) & ~(dmacHw_REG_CFG_HI_SRC_PERI_INTF_MASK)) | (((intf) << 7) & dmacHw_REG_CFG_HI_SRC_PERI_INTF_MASK))
+#define dmacHw_SRC_PERI_INTF(intf)                      (((intf) << 7) & dmacHw_REG_CFG_HI_SRC_PERI_INTF_MASK)
+#define dmacHw_SET_DST_PERI_INTF(module, channel, intf) (dmacHw_REG_CFG_HI((module), (channel)) = (dmacHw_REG_CFG_HI((module), (channel)) & ~(dmacHw_REG_CFG_HI_DST_PERI_INTF_MASK)) | (((intf) << 11) & dmacHw_REG_CFG_HI_DST_PERI_INTF_MASK))
+#define dmacHw_DST_PERI_INTF(intf)                      (((intf) << 11) & dmacHw_REG_CFG_HI_DST_PERI_INTF_MASK)
+
+#define dmacHw_DMA_START(module, channel)              (dmacHw_REG_MISC_CH_ENABLE((module)) = (0x00000001 << ((channel) + 8)) | (0x00000001 << (channel)))
+#define dmacHw_DMA_STOP(module, channel)               (dmacHw_REG_MISC_CH_ENABLE((module)) = (0x00000001 << ((channel) + 8)))
+#define dmacHw_DMA_ENABLE(module)                      (dmacHw_REG_MISC_CFG((module)) = 1)
+#define dmacHw_DMA_DISABLE(module)                     (dmacHw_REG_MISC_CFG((module)) = 0)
+
+#define dmacHw_TRAN_INT_ENABLE(module, channel)        (dmacHw_REG_INT_MASK_TRAN((module)) = (0x00000001 << ((channel) + 8)) | (0x00000001 << (channel)))
+#define dmacHw_BLOCK_INT_ENABLE(module, channel)       (dmacHw_REG_INT_MASK_BLOCK((module)) = (0x00000001 << ((channel) + 8)) | (0x00000001 << (channel)))
+#define dmacHw_ERROR_INT_ENABLE(module, channel)       (dmacHw_REG_INT_MASK_ERROR((module)) = (0x00000001 << ((channel) + 8)) | (0x00000001 << (channel)))
+
+#define dmacHw_TRAN_INT_DISABLE(module, channel)       (dmacHw_REG_INT_MASK_TRAN((module)) = (0x00000001 << ((channel) + 8)))
+#define dmacHw_BLOCK_INT_DISABLE(module, channel)      (dmacHw_REG_INT_MASK_BLOCK((module)) = (0x00000001 << ((channel) + 8)))
+#define dmacHw_ERROR_INT_DISABLE(module, channel)      (dmacHw_REG_INT_MASK_ERROR((module)) = (0x00000001 << ((channel) + 8)))
+#define dmacHw_STRAN_INT_DISABLE(module, channel)      (dmacHw_REG_INT_MASK_STRAN((module)) = (0x00000001 << ((channel) + 8)))
+#define dmacHw_DTRAN_INT_DISABLE(module, channel)      (dmacHw_REG_INT_MASK_DTRAN((module)) = (0x00000001 << ((channel) + 8)))
+
+#define dmacHw_TRAN_INT_CLEAR(module, channel)         (dmacHw_REG_INT_CLEAR_TRAN((module)) = (0x00000001 << (channel)))
+#define dmacHw_BLOCK_INT_CLEAR(module, channel)        (dmacHw_REG_INT_CLEAR_BLOCK((module)) = (0x00000001 << (channel)))
+#define dmacHw_ERROR_INT_CLEAR(module, channel)        (dmacHw_REG_INT_CLEAR_ERROR((module)) = (0x00000001 << (channel)))
+
+#define dmacHw_GET_NUM_CHANNEL(module)                 (((dmacHw_REG_MISC_COMP_PARAM1_HI((module)) & dmacHw_REG_COMP_PARAM_NUM_CHANNELS) >> 8) + 1)
+#define dmacHw_GET_NUM_INTERFACE(module)               (((dmacHw_REG_MISC_COMP_PARAM1_HI((module)) & dmacHw_REG_COMP_PARAM_NUM_INTERFACE) >> 11) + 1)
+#define dmacHw_GET_MAX_BLOCK_SIZE(module, channel)     ((dmacHw_REG_MISC_COMP_PARAM1_LO((module)) >> (4 * (channel))) & dmacHw_REG_COMP_PARAM_MAX_BLK_SIZE)
+#define dmacHw_GET_CHANNEL_DATA_WIDTH(module, channel) ((dmacHw_REG_MISC_COMP_PARAM1_HI((module)) & dmacHw_REG_COMP_PARAM_DATA_WIDTH) >> 13)
+
+#endif /* _DMACHW_REG_H */
diff --git a/arch/arm/mach-bcmring/include/mach/csp/hw_cfg.h b/arch/arm/mach-bcmring/include/mach/csp/hw_cfg.h
new file mode 100644
index 000000000000..cfa91bed9d34
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/hw_cfg.h
@@ -0,0 +1,73 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+
+#ifndef CSP_HW_CFG_H
+#define CSP_HW_CFG_H
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#include <cfg_global.h>
+#include <mach/csp/cap_inline.h>
+
+#if defined(__KERNEL__)
+#include <mach/memory_settings.h>
+#else
+#include <hw_cfg.h>
+#endif
+
+/* Some items that can be defined externally, but will be set to default values */
+/* if they are not defined. */
+/*      HW_CFG_PLL_SPREAD_SPECTRUM_DISABLE   Default undefined and SS is enabled. */
+/*      HW_CFG_SDRAM_CAS_LATENCY        5    Default 5, Values [3..6] */
+/*      HW_CFG_SDRAM_CHIP_SELECT_CNT    1    Default 1, Vaules [1..2] */
+/*      HW_CFG_SDRAM_SPEED_GRADE        667  Default 667, Values [400,533,667,800] */
+/*      HW_CFG_SDRAM_WIDTH_BITS         16   Default 16, Vaules [8,16] */
+/*      HW_CFG_SDRAM_ADDR_BRC                Default undefined and Row-Bank-Col (RBC) addressing used. Define to use Bank-Row-Col (BRC). */
+/*      HW_CFG_SDRAM_CLK_ASYNC               Default undefined and DDR clock is synchronous with AXI BUS clock. Define for ASYNC mode. */
+
+#if defined(CFG_GLOBAL_CHIP)
+  #if (CFG_GLOBAL_CHIP == FPGA11107)
+     #define HW_CFG_BUS_CLK_HZ            5000000
+     #define HW_CFG_DDR_CTLR_CLK_HZ      10000000
+     #define HW_CFG_DDR_PHY_OMIT
+     #define HW_CFG_UART_CLK_HZ           7500000
+  #else
+     #define HW_CFG_PLL_VCO_HZ           2000000000
+     #define HW_CFG_PLL2_VCO_HZ          1800000000
+     #define HW_CFG_ARM_CLK_HZ            CAP_HW_CFG_ARM_CLK_HZ
+     #define HW_CFG_BUS_CLK_HZ            166666666
+     #define HW_CFG_DDR_CTLR_CLK_HZ       333333333
+     #define HW_CFG_DDR_PHY_CLK_HZ        (2 * HW_CFG_DDR_CTLR_CLK_HZ)
+     #define HW_CFG_UART_CLK_HZ           142857142
+     #define HW_CFG_VPM_CLK_HZ            CAP_HW_CFG_VPM_CLK_HZ
+  #endif
+#else
+   #define HW_CFG_PLL_VCO_HZ           1800000000
+   #define HW_CFG_PLL2_VCO_HZ          1800000000
+   #define HW_CFG_ARM_CLK_HZ            450000000
+   #define HW_CFG_BUS_CLK_HZ            150000000
+   #define HW_CFG_DDR_CTLR_CLK_HZ       300000000
+   #define HW_CFG_DDR_PHY_CLK_HZ        (2 * HW_CFG_DDR_CTLR_CLK_HZ)
+   #define HW_CFG_UART_CLK_HZ           150000000
+   #define HW_CFG_VPM_CLK_HZ            300000000
+#endif
+
+/* ---- Public Constants and Types --------------------------------------- */
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+
+
+#endif /* CSP_HW_CFG_H */
+
diff --git a/arch/arm/mach-bcmring/include/mach/csp/intcHw_reg.h b/arch/arm/mach-bcmring/include/mach/csp/intcHw_reg.h
new file mode 100644
index 000000000000..e01fc4607c91
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/intcHw_reg.h
@@ -0,0 +1,246 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*  @file    intcHw_reg.h
+*
+*  @brief   platform specific interrupt controller bit assignments
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+
+#ifndef _INTCHW_REG_H
+#define _INTCHW_REG_H
+
+/* ---- Include Files ---------------------------------------------------- */
+#include <csp/stdint.h>
+#include <csp/reg.h>
+#include <mach/csp/mm_io.h>
+
+/* ---- Public Constants and Types --------------------------------------- */
+
+#define INTCHW_NUM_IRQ_PER_INTC   32	/* Maximum number of interrupt controllers */
+#define INTCHW_NUM_INTC           3
+
+/* Defines for interrupt controllers. This simplifies and cleans up the function calls. */
+#define INTCHW_INTC0    ((void *)MM_IO_BASE_INTC0)
+#define INTCHW_INTC1    ((void *)MM_IO_BASE_INTC1)
+#define INTCHW_SINTC    ((void *)MM_IO_BASE_SINTC)
+
+/* INTC0 - interrupt controller 0 */
+#define INTCHW_INTC0_PIF_BITNUM           31	/* Peripheral interface interrupt */
+#define INTCHW_INTC0_CLCD_BITNUM          30	/* LCD Controller interrupt */
+#define INTCHW_INTC0_GE_BITNUM            29	/* Graphic engine interrupt */
+#define INTCHW_INTC0_APM_BITNUM           28	/* Audio process module interrupt */
+#define INTCHW_INTC0_ESW_BITNUM           27	/* Ethernet switch interrupt */
+#define INTCHW_INTC0_SPIH_BITNUM          26	/* SPI host interrupt */
+#define INTCHW_INTC0_TIMER3_BITNUM        25	/* Timer3 interrupt */
+#define INTCHW_INTC0_TIMER2_BITNUM        24	/* Timer2 interrupt */
+#define INTCHW_INTC0_TIMER1_BITNUM        23	/* Timer1 interrupt */
+#define INTCHW_INTC0_TIMER0_BITNUM        22	/* Timer0 interrupt */
+#define INTCHW_INTC0_SDIOH1_BITNUM        21	/* SDIO1 host interrupt */
+#define INTCHW_INTC0_SDIOH0_BITNUM        20	/* SDIO0 host interrupt */
+#define INTCHW_INTC0_USBD_BITNUM          19	/* USB device interrupt */
+#define INTCHW_INTC0_USBH1_BITNUM         18	/* USB1 host interrupt */
+#define INTCHW_INTC0_USBHD2_BITNUM        17	/* USB host2/device2 interrupt */
+#define INTCHW_INTC0_VPM_BITNUM           16	/* Voice process module interrupt */
+#define INTCHW_INTC0_DMA1C7_BITNUM        15	/* DMA1 channel 7 interrupt */
+#define INTCHW_INTC0_DMA1C6_BITNUM        14	/* DMA1 channel 6 interrupt */
+#define INTCHW_INTC0_DMA1C5_BITNUM        13	/* DMA1 channel 5 interrupt */
+#define INTCHW_INTC0_DMA1C4_BITNUM        12	/* DMA1 channel 4 interrupt */
+#define INTCHW_INTC0_DMA1C3_BITNUM        11	/* DMA1 channel 3 interrupt */
+#define INTCHW_INTC0_DMA1C2_BITNUM        10	/* DMA1 channel 2 interrupt */
+#define INTCHW_INTC0_DMA1C1_BITNUM         9	/* DMA1 channel 1 interrupt */
+#define INTCHW_INTC0_DMA1C0_BITNUM         8	/* DMA1 channel 0 interrupt */
+#define INTCHW_INTC0_DMA0C7_BITNUM         7	/* DMA0 channel 7 interrupt */
+#define INTCHW_INTC0_DMA0C6_BITNUM         6	/* DMA0 channel 6 interrupt */
+#define INTCHW_INTC0_DMA0C5_BITNUM         5	/* DMA0 channel 5 interrupt */
+#define INTCHW_INTC0_DMA0C4_BITNUM         4	/* DMA0 channel 4 interrupt */
+#define INTCHW_INTC0_DMA0C3_BITNUM         3	/* DMA0 channel 3 interrupt */
+#define INTCHW_INTC0_DMA0C2_BITNUM         2	/* DMA0 channel 2 interrupt */
+#define INTCHW_INTC0_DMA0C1_BITNUM         1	/* DMA0 channel 1 interrupt */
+#define INTCHW_INTC0_DMA0C0_BITNUM         0	/* DMA0 channel 0 interrupt */
+
+#define INTCHW_INTC0_PIF                  (1<<INTCHW_INTC0_PIF_BITNUM)
+#define INTCHW_INTC0_CLCD                 (1<<INTCHW_INTC0_CLCD_BITNUM)
+#define INTCHW_INTC0_GE                   (1<<INTCHW_INTC0_GE_BITNUM)
+#define INTCHW_INTC0_APM                  (1<<INTCHW_INTC0_APM_BITNUM)
+#define INTCHW_INTC0_ESW                  (1<<INTCHW_INTC0_ESW_BITNUM)
+#define INTCHW_INTC0_SPIH                 (1<<INTCHW_INTC0_SPIH_BITNUM)
+#define INTCHW_INTC0_TIMER3               (1<<INTCHW_INTC0_TIMER3_BITNUM)
+#define INTCHW_INTC0_TIMER2               (1<<INTCHW_INTC0_TIMER2_BITNUM)
+#define INTCHW_INTC0_TIMER1               (1<<INTCHW_INTC0_TIMER1_BITNUM)
+#define INTCHW_INTC0_TIMER0               (1<<INTCHW_INTC0_TIMER0_BITNUM)
+#define INTCHW_INTC0_SDIOH1               (1<<INTCHW_INTC0_SDIOH1_BITNUM)
+#define INTCHW_INTC0_SDIOH0               (1<<INTCHW_INTC0_SDIOH0_BITNUM)
+#define INTCHW_INTC0_USBD                 (1<<INTCHW_INTC0_USBD_BITNUM)
+#define INTCHW_INTC0_USBH1                (1<<INTCHW_INTC0_USBH1_BITNUM)
+#define INTCHW_INTC0_USBHD2               (1<<INTCHW_INTC0_USBHD2_BITNUM)
+#define INTCHW_INTC0_VPM                  (1<<INTCHW_INTC0_VPM_BITNUM)
+#define INTCHW_INTC0_DMA1C7               (1<<INTCHW_INTC0_DMA1C7_BITNUM)
+#define INTCHW_INTC0_DMA1C6               (1<<INTCHW_INTC0_DMA1C6_BITNUM)
+#define INTCHW_INTC0_DMA1C5               (1<<INTCHW_INTC0_DMA1C5_BITNUM)
+#define INTCHW_INTC0_DMA1C4               (1<<INTCHW_INTC0_DMA1C4_BITNUM)
+#define INTCHW_INTC0_DMA1C3               (1<<INTCHW_INTC0_DMA1C3_BITNUM)
+#define INTCHW_INTC0_DMA1C2               (1<<INTCHW_INTC0_DMA1C2_BITNUM)
+#define INTCHW_INTC0_DMA1C1               (1<<INTCHW_INTC0_DMA1C1_BITNUM)
+#define INTCHW_INTC0_DMA1C0               (1<<INTCHW_INTC0_DMA1C0_BITNUM)
+#define INTCHW_INTC0_DMA0C7               (1<<INTCHW_INTC0_DMA0C7_BITNUM)
+#define INTCHW_INTC0_DMA0C6               (1<<INTCHW_INTC0_DMA0C6_BITNUM)
+#define INTCHW_INTC0_DMA0C5               (1<<INTCHW_INTC0_DMA0C5_BITNUM)
+#define INTCHW_INTC0_DMA0C4               (1<<INTCHW_INTC0_DMA0C4_BITNUM)
+#define INTCHW_INTC0_DMA0C3               (1<<INTCHW_INTC0_DMA0C3_BITNUM)
+#define INTCHW_INTC0_DMA0C2               (1<<INTCHW_INTC0_DMA0C2_BITNUM)
+#define INTCHW_INTC0_DMA0C1               (1<<INTCHW_INTC0_DMA0C1_BITNUM)
+#define INTCHW_INTC0_DMA0C0               (1<<INTCHW_INTC0_DMA0C0_BITNUM)
+
+/* INTC1 - interrupt controller 1 */
+#define INTCHW_INTC1_DDRVPMP_BITNUM       27	/* DDR and VPM PLL clock phase relationship interupt (Not for A0) */
+#define INTCHW_INTC1_DDRVPMT_BITNUM       26	/* DDR and VPM HW phase align timeout interrupt (Not for A0) */
+#define INTCHW_INTC1_DDRP_BITNUM          26	/* DDR and PLL clock phase relationship interupt (For A0 only)) */
+#define INTCHW_INTC1_RTC2_BITNUM          25	/* Real time clock tamper interrupt */
+#define INTCHW_INTC1_VDEC_BITNUM          24	/* Hantro Video Decoder interrupt */
+/* Bits 13-23 are non-secure versions of the corresponding secure bits in SINTC bits 0-10. */
+#define INTCHW_INTC1_SPUM_BITNUM          23	/* Secure process module interrupt */
+#define INTCHW_INTC1_RTC1_BITNUM          22	/* Real time clock one-shot interrupt */
+#define INTCHW_INTC1_RTC0_BITNUM          21	/* Real time clock periodic interrupt */
+#define INTCHW_INTC1_RNG_BITNUM           20	/* Random number generator interrupt */
+#define INTCHW_INTC1_FMPU_BITNUM          19	/* Flash memory parition unit interrupt */
+#define INTCHW_INTC1_VMPU_BITNUM          18	/* VRAM memory partition interrupt */
+#define INTCHW_INTC1_DMPU_BITNUM          17	/* DDR2 memory partition interrupt */
+#define INTCHW_INTC1_KEYC_BITNUM          16	/* Key pad controller interrupt */
+#define INTCHW_INTC1_TSC_BITNUM           15	/* Touch screen controller interrupt */
+#define INTCHW_INTC1_UART0_BITNUM         14	/* UART 0 */
+#define INTCHW_INTC1_WDOG_BITNUM          13	/* Watchdog timer interrupt */
+
+#define INTCHW_INTC1_UART1_BITNUM         12	/* UART 1 */
+#define INTCHW_INTC1_PMUIRQ_BITNUM        11	/* ARM performance monitor interrupt */
+#define INTCHW_INTC1_COMMRX_BITNUM        10	/* ARM DDC receive interrupt */
+#define INTCHW_INTC1_COMMTX_BITNUM         9	/* ARM DDC transmit interrupt */
+#define INTCHW_INTC1_FLASHC_BITNUM         8	/* Flash controller interrupt */
+#define INTCHW_INTC1_GPHY_BITNUM           7	/* Gigabit Phy interrupt */
+#define INTCHW_INTC1_SPIS_BITNUM           6	/* SPI slave interrupt */
+#define INTCHW_INTC1_I2CS_BITNUM           5	/* I2C slave interrupt */
+#define INTCHW_INTC1_I2CH_BITNUM           4	/* I2C host interrupt */
+#define INTCHW_INTC1_I2S1_BITNUM           3	/* I2S1 interrupt */
+#define INTCHW_INTC1_I2S0_BITNUM           2	/* I2S0 interrupt */
+#define INTCHW_INTC1_GPIO1_BITNUM          1	/* GPIO bit 64//32 combined interrupt */
+#define INTCHW_INTC1_GPIO0_BITNUM          0	/* GPIO bit 31//0 combined interrupt */
+
+#define INTCHW_INTC1_DDRVPMT              (1<<INTCHW_INTC1_DDRVPMT_BITNUM)
+#define INTCHW_INTC1_DDRVPMP              (1<<INTCHW_INTC1_DDRVPMP_BITNUM)
+#define INTCHW_INTC1_DDRP                 (1<<INTCHW_INTC1_DDRP_BITNUM)
+#define INTCHW_INTC1_VDEC                 (1<<INTCHW_INTC1_VDEC_BITNUM)
+#define INTCHW_INTC1_SPUM                 (1<<INTCHW_INTC1_SPUM_BITNUM)
+#define INTCHW_INTC1_RTC2                 (1<<INTCHW_INTC1_RTC2_BITNUM)
+#define INTCHW_INTC1_RTC1                 (1<<INTCHW_INTC1_RTC1_BITNUM)
+#define INTCHW_INTC1_RTC0                 (1<<INTCHW_INTC1_RTC0_BITNUM)
+#define INTCHW_INTC1_RNG                  (1<<INTCHW_INTC1_RNG_BITNUM)
+#define INTCHW_INTC1_FMPU                 (1<<INTCHW_INTC1_FMPU_BITNUM)
+#define INTCHW_INTC1_IMPU                 (1<<INTCHW_INTC1_IMPU_BITNUM)
+#define INTCHW_INTC1_DMPU                 (1<<INTCHW_INTC1_DMPU_BITNUM)
+#define INTCHW_INTC1_KEYC                 (1<<INTCHW_INTC1_KEYC_BITNUM)
+#define INTCHW_INTC1_TSC                  (1<<INTCHW_INTC1_TSC_BITNUM)
+#define INTCHW_INTC1_UART0                (1<<INTCHW_INTC1_UART0_BITNUM)
+#define INTCHW_INTC1_WDOG                 (1<<INTCHW_INTC1_WDOG_BITNUM)
+#define INTCHW_INTC1_UART1                (1<<INTCHW_INTC1_UART1_BITNUM)
+#define INTCHW_INTC1_PMUIRQ               (1<<INTCHW_INTC1_PMUIRQ_BITNUM)
+#define INTCHW_INTC1_COMMRX               (1<<INTCHW_INTC1_COMMRX_BITNUM)
+#define INTCHW_INTC1_COMMTX               (1<<INTCHW_INTC1_COMMTX_BITNUM)
+#define INTCHW_INTC1_FLASHC               (1<<INTCHW_INTC1_FLASHC_BITNUM)
+#define INTCHW_INTC1_GPHY                 (1<<INTCHW_INTC1_GPHY_BITNUM)
+#define INTCHW_INTC1_SPIS                 (1<<INTCHW_INTC1_SPIS_BITNUM)
+#define INTCHW_INTC1_I2CS                 (1<<INTCHW_INTC1_I2CS_BITNUM)
+#define INTCHW_INTC1_I2CH                 (1<<INTCHW_INTC1_I2CH_BITNUM)
+#define INTCHW_INTC1_I2S1                 (1<<INTCHW_INTC1_I2S1_BITNUM)
+#define INTCHW_INTC1_I2S0                 (1<<INTCHW_INTC1_I2S0_BITNUM)
+#define INTCHW_INTC1_GPIO1                (1<<INTCHW_INTC1_GPIO1_BITNUM)
+#define INTCHW_INTC1_GPIO0                (1<<INTCHW_INTC1_GPIO0_BITNUM)
+
+/* SINTC secure int controller */
+#define INTCHW_SINTC_RTC2_BITNUM          15	/* Real time clock tamper interrupt */
+#define INTCHW_SINTC_TIMER3_BITNUM        14	/* Secure timer3 interrupt */
+#define INTCHW_SINTC_TIMER2_BITNUM        13	/* Secure timer2 interrupt */
+#define INTCHW_SINTC_TIMER1_BITNUM        12	/* Secure timer1 interrupt */
+#define INTCHW_SINTC_TIMER0_BITNUM        11	/* Secure timer0 interrupt */
+#define INTCHW_SINTC_SPUM_BITNUM          10	/* Secure process module interrupt */
+#define INTCHW_SINTC_RTC1_BITNUM           9	/* Real time clock one-shot interrupt */
+#define INTCHW_SINTC_RTC0_BITNUM           8	/* Real time clock periodic interrupt */
+#define INTCHW_SINTC_RNG_BITNUM            7	/* Random number generator interrupt */
+#define INTCHW_SINTC_FMPU_BITNUM           6	/* Flash memory parition unit interrupt */
+#define INTCHW_SINTC_VMPU_BITNUM           5	/* VRAM memory partition interrupt */
+#define INTCHW_SINTC_DMPU_BITNUM           4	/* DDR2 memory partition interrupt */
+#define INTCHW_SINTC_KEYC_BITNUM           3	/* Key pad controller interrupt */
+#define INTCHW_SINTC_TSC_BITNUM            2	/* Touch screen controller interrupt */
+#define INTCHW_SINTC_UART0_BITNUM          1	/* UART0 interrupt */
+#define INTCHW_SINTC_WDOG_BITNUM           0	/* Watchdog timer interrupt */
+
+#define INTCHW_SINTC_TIMER3               (1<<INTCHW_SINTC_TIMER3_BITNUM)
+#define INTCHW_SINTC_TIMER2               (1<<INTCHW_SINTC_TIMER2_BITNUM)
+#define INTCHW_SINTC_TIMER1               (1<<INTCHW_SINTC_TIMER1_BITNUM)
+#define INTCHW_SINTC_TIMER0               (1<<INTCHW_SINTC_TIMER0_BITNUM)
+#define INTCHW_SINTC_SPUM                 (1<<INTCHW_SINTC_SPUM_BITNUM)
+#define INTCHW_SINTC_RTC2                 (1<<INTCHW_SINTC_RTC2_BITNUM)
+#define INTCHW_SINTC_RTC1                 (1<<INTCHW_SINTC_RTC1_BITNUM)
+#define INTCHW_SINTC_RTC0                 (1<<INTCHW_SINTC_RTC0_BITNUM)
+#define INTCHW_SINTC_RNG                  (1<<INTCHW_SINTC_RNG_BITNUM)
+#define INTCHW_SINTC_FMPU                 (1<<INTCHW_SINTC_FMPU_BITNUM)
+#define INTCHW_SINTC_IMPU                 (1<<INTCHW_SINTC_IMPU_BITNUM)
+#define INTCHW_SINTC_DMPU                 (1<<INTCHW_SINTC_DMPU_BITNUM)
+#define INTCHW_SINTC_KEYC                 (1<<INTCHW_SINTC_KEYC_BITNUM)
+#define INTCHW_SINTC_TSC                  (1<<INTCHW_SINTC_TSC_BITNUM)
+#define INTCHW_SINTC_UART0                (1<<INTCHW_SINTC_UART0_BITNUM)
+#define INTCHW_SINTC_WDOG                 (1<<INTCHW_SINTC_WDOG_BITNUM)
+
+/* PL192 Vectored Interrupt Controller (VIC) layout */
+#define INTCHW_IRQSTATUS      0x00	/* IRQ status register */
+#define INTCHW_FIQSTATUS      0x04	/* FIQ status register */
+#define INTCHW_RAWINTR        0x08	/* Raw Interrupt Status register */
+#define INTCHW_INTSELECT      0x0c	/* Interrupt Select Register */
+#define INTCHW_INTENABLE      0x10	/* Interrupt Enable Register */
+#define INTCHW_INTENCLEAR     0x14	/* Interrupt Enable Clear Register */
+#define INTCHW_SOFTINT        0x18	/* Soft Interrupt Register */
+#define INTCHW_SOFTINTCLEAR   0x1c	/* Soft Interrupt Clear Register */
+#define INTCHW_PROTECTION     0x20	/* Protection Enable Register */
+#define INTCHW_SWPRIOMASK     0x24	/* Software Priority Mask Register */
+#define INTCHW_PRIODAISY      0x28	/* Priority Daisy Chain Register */
+#define INTCHW_VECTADDR0      0x100	/* Vector Address Registers */
+#define INTCHW_VECTPRIO0      0x200	/* Vector Priority Registers 0-31 */
+#define INTCHW_ADDRESS        0xf00	/* Vector Address Register 0-31 */
+#define INTCHW_PID            0xfe0	/* Peripheral ID Register 0-3 */
+#define INTCHW_PCELLID        0xff0	/* PrimeCell ID Register 0-3 */
+
+/* Example Usage: intcHw_irq_enable(INTCHW_INTC0, INTCHW_INTC0_TIMER0); */
+/*                intcHw_irq_clear(INTCHW_INTC0, INTCHW_INTC0_TIMER0); */
+/*                uint32_t bits = intcHw_irq_status(INTCHW_INTC0); */
+/*                uint32_t bits = intcHw_irq_raw_status(INTCHW_INTC0); */
+
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+/* Clear one or more IRQ interrupts. */
+static inline void intcHw_irq_disable(void *basep, uint32_t mask)
+{
+	__REG32(basep + INTCHW_INTENCLEAR) = mask;
+}
+
+/* Enables one or more IRQ interrupts. */
+static inline void intcHw_irq_enable(void *basep, uint32_t mask)
+{
+	__REG32(basep + INTCHW_INTENABLE) = mask;
+}
+
+#endif /* _INTCHW_REG_H */
diff --git a/arch/arm/mach-bcmring/include/mach/csp/mm_addr.h b/arch/arm/mach-bcmring/include/mach/csp/mm_addr.h
new file mode 100644
index 000000000000..86bb58d4f58c
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/mm_addr.h
@@ -0,0 +1,101 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*  @file    mm_addr.h
+*
+*  @brief   Memory Map address defintions
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+
+#ifndef _MM_ADDR_H
+#define _MM_ADDR_H
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#if !defined(CSP_SIMULATION)
+#include <cfg_global.h>
+#endif
+
+/* ---- Public Constants and Types --------------------------------------- */
+
+/*  Memory Map address definitions */
+
+#define MM_ADDR_DDR                0x00000000
+
+#define MM_ADDR_IO_VPM_EXTMEM_RSVD 0x0F000000	/* 16 MB - Reserved external memory for VPM use */
+
+#define MM_ADDR_IO_FLASHC          0x20000000
+#define MM_ADDR_IO_BROM            0x30000000
+#define MM_ADDR_IO_ARAM            0x30100000	/* 64 KB - extra cycle latency - WS switch */
+#define MM_ADDR_IO_DMA0            0x30200000
+#define MM_ADDR_IO_DMA1            0x30300000
+#define MM_ADDR_IO_ESW             0x30400000
+#define MM_ADDR_IO_CLCD            0x30500000
+#define MM_ADDR_IO_PIF             0x30580000
+#define MM_ADDR_IO_APM             0x30600000
+#define MM_ADDR_IO_SPUM            0x30700000
+#define MM_ADDR_IO_VPM_PROG        0x30800000
+#define MM_ADDR_IO_VPM_DATA        0x30A00000
+#define MM_ADDR_IO_VRAM            0x40000000	/* 64 KB  - security block in front of it */
+#define MM_ADDR_IO_CHIPC           0x80000000
+#define MM_ADDR_IO_UMI             0x80001000
+#define MM_ADDR_IO_NAND            0x80001800
+#define MM_ADDR_IO_LEDM            0x80002000
+#define MM_ADDR_IO_PWM             0x80002040
+#define MM_ADDR_IO_VINTC           0x80003000
+#define MM_ADDR_IO_GPIO0           0x80004000
+#define MM_ADDR_IO_GPIO1           0x80004800
+#define MM_ADDR_IO_I2CS            0x80005000
+#define MM_ADDR_IO_SPIS            0x80006000
+#define MM_ADDR_IO_HPM             0x80007400
+#define MM_ADDR_IO_HPM_REMAP       0x80007800
+#define MM_ADDR_IO_TZPC            0x80008000
+#define MM_ADDR_IO_MPU             0x80009000
+#define MM_ADDR_IO_SPUMP           0x8000a000
+#define MM_ADDR_IO_PKA             0x8000b000
+#define MM_ADDR_IO_RNG             0x8000c000
+#define MM_ADDR_IO_KEYC            0x8000d000
+#define MM_ADDR_IO_BBL             0x8000e000
+#define MM_ADDR_IO_OTP             0x8000f000
+#define MM_ADDR_IO_I2S0            0x80010000
+#define MM_ADDR_IO_I2S1            0x80011000
+#define MM_ADDR_IO_UARTA           0x80012000
+#define MM_ADDR_IO_UARTB           0x80013000
+#define MM_ADDR_IO_I2CH            0x80014020
+#define MM_ADDR_IO_SPIH            0x80015000
+#define MM_ADDR_IO_TSC             0x80016000
+#define MM_ADDR_IO_TMR             0x80017000
+#define MM_ADDR_IO_WATCHDOG        0x80017800
+#define MM_ADDR_IO_ETM             0x80018000
+#define MM_ADDR_IO_DDRC            0x80019000
+#define MM_ADDR_IO_SINTC           0x80100000
+#define MM_ADDR_IO_INTC0           0x80200000
+#define MM_ADDR_IO_INTC1           0x80201000
+#define MM_ADDR_IO_GE              0x80300000
+#define MM_ADDR_IO_USB_CTLR0       0x80400000
+#define MM_ADDR_IO_USB_CTLR1       0x80410000
+#define MM_ADDR_IO_USB_PHY         0x80420000
+#define MM_ADDR_IO_SDIOH0          0x80500000
+#define MM_ADDR_IO_SDIOH1          0x80600000
+#define MM_ADDR_IO_VDEC            0x80700000
+
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+
+#endif /* _MM_ADDR_H */
diff --git a/arch/arm/mach-bcmring/include/mach/csp/mm_io.h b/arch/arm/mach-bcmring/include/mach/csp/mm_io.h
new file mode 100644
index 000000000000..de92ec6a01aa
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/mm_io.h
@@ -0,0 +1,147 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*  @file    mm_io.h
+*
+*  @brief   Memory Map I/O definitions
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+
+#ifndef _MM_IO_H
+#define _MM_IO_H
+
+/* ---- Include Files ---------------------------------------------------- */
+#include <mach/csp/mm_addr.h>
+
+#if !defined(CSP_SIMULATION)
+#include <cfg_global.h>
+#endif
+
+/* ---- Public Constants and Types --------------------------------------- */
+
+#if defined(CONFIG_MMU)
+
+/* This macro is referenced in <mach/io.h>
+ * Phys to Virtual 0xNyxxxxxx => 0xFNxxxxxx
+ * This macro is referenced in <asm/arch/io.h>
+ *
+ * Assume VPM address is the last x MB of memory.  For VPM, map to
+ * 0xf0000000 and up.
+ */
+
+#ifndef MM_IO_PHYS_TO_VIRT
+#ifdef __ASSEMBLY__
+#define MM_IO_PHYS_TO_VIRT(phys)       (0xF0000000 | (((phys) >> 4) & 0x0F000000) | ((phys) & 0xFFFFFF))
+#else
+#define MM_IO_PHYS_TO_VIRT(phys)       (((phys) == MM_ADDR_IO_VPM_EXTMEM_RSVD) ? 0xF0000000 : \
+			(0xF0000000 | (((phys) >> 4) & 0x0F000000) | ((phys) & 0xFFFFFF)))
+#endif
+#endif
+
+/* Virtual to Physical 0xFNxxxxxx => 0xN0xxxxxx */
+
+#ifndef MM_IO_VIRT_TO_PHYS
+#ifdef __ASSEMBLY__
+#define MM_IO_VIRT_TO_PHYS(virt)       ((((virt) & 0x0F000000) << 4) | ((virt) & 0xFFFFFF))
+#else
+#define MM_IO_VIRT_TO_PHYS(virt)       (((virt) == 0xF0000000) ? MM_ADDR_IO_VPM_EXTMEM_RSVD : \
+			((((virt) & 0x0F000000) << 4) | ((virt) & 0xFFFFFF)))
+#endif
+#endif
+
+#else
+
+#ifndef MM_IO_PHYS_TO_VIRT
+#define MM_IO_PHYS_TO_VIRT(phys)       (phys)
+#endif
+
+#ifndef MM_IO_VIRT_TO_PHYS
+#define MM_IO_VIRT_TO_PHYS(virt)       (virt)
+#endif
+
+#endif
+
+/* Registers in 0xExxxxxxx that should be moved to 0xFxxxxxxx */
+#define MM_IO_BASE_FLASHC              MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_FLASHC)
+#define MM_IO_BASE_NAND                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_NAND)
+#define MM_IO_BASE_UMI                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_UMI)
+
+#define MM_IO_START MM_ADDR_IO_FLASHC	/* Physical beginning of IO mapped memory */
+#define MM_IO_BASE  MM_IO_BASE_FLASHC	/* Virtual beginning of IO mapped memory */
+
+#define MM_IO_BASE_BROM                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_BROM)
+#define MM_IO_BASE_ARAM                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_ARAM)
+#define MM_IO_BASE_DMA0                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_DMA0)
+#define MM_IO_BASE_DMA1                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_DMA1)
+#define MM_IO_BASE_ESW                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_ESW)
+#define MM_IO_BASE_CLCD                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_CLCD)
+#define MM_IO_BASE_PIF                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_PIF)
+#define MM_IO_BASE_APM                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_APM)
+#define MM_IO_BASE_SPUM                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_SPUM)
+#define MM_IO_BASE_VPM_PROG            MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_VPM_PROG)
+#define MM_IO_BASE_VPM_DATA            MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_VPM_DATA)
+
+#define MM_IO_BASE_VRAM                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_VRAM)
+
+#define MM_IO_BASE_CHIPC               MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_CHIPC)
+#define MM_IO_BASE_DDRC                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_DDRC)
+#define MM_IO_BASE_LEDM                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_LEDM)
+#define MM_IO_BASE_PWM                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_PWM)
+#define MM_IO_BASE_VINTC               MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_VINTC)
+#define MM_IO_BASE_GPIO0               MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_GPIO0)
+#define MM_IO_BASE_GPIO1               MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_GPIO1)
+#define MM_IO_BASE_TMR                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_TMR)
+#define MM_IO_BASE_WATCHDOG            MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_WATCHDOG)
+#define MM_IO_BASE_ETM                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_ETM)
+#define MM_IO_BASE_HPM                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_HPM)
+#define MM_IO_BASE_HPM_REMAP           MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_HPM_REMAP)
+#define MM_IO_BASE_TZPC                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_TZPC)
+#define MM_IO_BASE_MPU                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_MPU)
+#define MM_IO_BASE_SPUMP               MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_SPUMP)
+#define MM_IO_BASE_PKA                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_PKA)
+#define MM_IO_BASE_RNG                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_RNG)
+#define MM_IO_BASE_KEYC                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_KEYC)
+#define MM_IO_BASE_BBL                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_BBL)
+#define MM_IO_BASE_OTP                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_OTP)
+#define MM_IO_BASE_I2S0                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_I2S0)
+#define MM_IO_BASE_I2S1                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_I2S1)
+#define MM_IO_BASE_UARTA               MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_UARTA)
+#define MM_IO_BASE_UARTB               MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_UARTB)
+#define MM_IO_BASE_I2CH                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_I2CH)
+#define MM_IO_BASE_SPIH                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_SPIH)
+#define MM_IO_BASE_TSC                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_TSC)
+#define MM_IO_BASE_I2CS                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_I2CS)
+#define MM_IO_BASE_SPIS                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_SPIS)
+#define MM_IO_BASE_SINTC               MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_SINTC)
+#define MM_IO_BASE_INTC0               MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_INTC0)
+#define MM_IO_BASE_INTC1               MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_INTC1)
+#define MM_IO_BASE_GE                  MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_GE)
+#define MM_IO_BASE_USB_CTLR0           MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_USB_CTLR0)
+#define MM_IO_BASE_USB_CTLR1           MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_USB_CTLR1)
+#define MM_IO_BASE_USB_PHY             MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_USB_PHY)
+#define MM_IO_BASE_SDIOH0              MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_SDIOH0)
+#define MM_IO_BASE_SDIOH1              MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_SDIOH1)
+#define MM_IO_BASE_VDEC                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_VDEC)
+
+#define MM_IO_BASE_VPM_EXTMEM_RSVD     MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_VPM_EXTMEM_RSVD)
+
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+
+#endif /* _MM_IO_H */
diff --git a/arch/arm/mach-bcmring/include/mach/csp/secHw_def.h b/arch/arm/mach-bcmring/include/mach/csp/secHw_def.h
new file mode 100644
index 000000000000..d15f5f3ec2d8
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/secHw_def.h
@@ -0,0 +1,100 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*  @file    secHw_def.h
+*
+*  @brief   Definitions for configuring/testing secure blocks
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+
+#ifndef SECHW_DEF_H
+#define SECHW_DEF_H
+
+#include <mach/csp/mm_io.h>
+
+/* Bit mask for various secure device */
+#define secHw_BLK_MASK_CHIP_CONTROL     0x00000001
+#define secHw_BLK_MASK_KEY_SCAN         0x00000002
+#define secHw_BLK_MASK_TOUCH_SCREEN     0x00000004
+#define secHw_BLK_MASK_UART0            0x00000008
+#define secHw_BLK_MASK_UART1            0x00000010
+#define secHw_BLK_MASK_WATCHDOG         0x00000020
+#define secHw_BLK_MASK_SPUM             0x00000040
+#define secHw_BLK_MASK_DDR2             0x00000080
+#define secHw_BLK_MASK_EXT_MEM          0x00000100
+#define secHw_BLK_MASK_ESW              0x00000200
+#define secHw_BLK_MASK_SPU              0x00010000
+#define secHw_BLK_MASK_PKA              0x00020000
+#define secHw_BLK_MASK_RNG              0x00040000
+#define secHw_BLK_MASK_RTC              0x00080000
+#define secHw_BLK_MASK_OTP              0x00100000
+#define secHw_BLK_MASK_BOOT             0x00200000
+#define secHw_BLK_MASK_MPU              0x00400000
+#define secHw_BLK_MASK_TZCTRL           0x00800000
+#define secHw_BLK_MASK_INTR             0x01000000
+
+/* Trustzone register set */
+typedef struct {
+	volatile uint32_t status;	/* read only - reflects status of writes of 2 write registers */
+	volatile uint32_t setUnsecure;	/* write only. reads back as 0 */
+	volatile uint32_t setSecure;	/* write only. reads back as 0 */
+} secHw_TZREG_t;
+
+/* There are 2 register sets. The first is for the lower 16 bits, the 2nd */
+/* is for the higher 16 bits. */
+
+typedef enum {
+	secHw_IDX_LS = 0,
+	secHw_IDX_MS = 1,
+	secHw_IDX_NUM
+} secHw_IDX_e;
+
+typedef struct {
+	volatile secHw_TZREG_t reg[secHw_IDX_NUM];
+} secHw_REGS_t;
+
+/****************************************************************************/
+/**
+*  @brief  Configures a device as a secure device
+*
+*/
+/****************************************************************************/
+static inline void secHw_setSecure(uint32_t mask	/*  mask of type secHw_BLK_MASK_XXXXXX */
+    );
+
+/****************************************************************************/
+/**
+*  @brief  Configures a device as a non-secure device
+*
+*/
+/****************************************************************************/
+static inline void secHw_setUnsecure(uint32_t mask	/*  mask of type secHw_BLK_MASK_XXXXXX */
+    );
+
+/****************************************************************************/
+/**
+*  @brief  Get the trustzone status for all components. 1 = non-secure, 0 = secure
+*
+*/
+/****************************************************************************/
+static inline uint32_t secHw_getStatus(void);
+
+#include <mach/csp/secHw_inline.h>
+
+#endif /* SECHW_DEF_H */
diff --git a/arch/arm/mach-bcmring/include/mach/csp/secHw_inline.h b/arch/arm/mach-bcmring/include/mach/csp/secHw_inline.h
new file mode 100644
index 000000000000..9cd6a032ab71
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/secHw_inline.h
@@ -0,0 +1,79 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*  @file    secHw_inline.h
+*
+*  @brief   Definitions for configuring/testing secure blocks
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+
+#ifndef SECHW_INLINE_H
+#define SECHW_INLINE_H
+
+/****************************************************************************/
+/**
+*  @brief  Configures a device as a secure device
+*
+*/
+/****************************************************************************/
+static inline void secHw_setSecure(uint32_t mask	/*  mask of type secHw_BLK_MASK_XXXXXX */
+    ) {
+	secHw_REGS_t *regp = (secHw_REGS_t *) MM_IO_BASE_TZPC;
+
+	if (mask & 0x0000FFFF) {
+		regp->reg[secHw_IDX_LS].setSecure = mask & 0x0000FFFF;
+	}
+
+	if (mask & 0xFFFF0000) {
+		regp->reg[secHw_IDX_MS].setSecure = mask >> 16;
+	}
+}
+
+/****************************************************************************/
+/**
+*  @brief  Configures a device as a non-secure device
+*
+*/
+/****************************************************************************/
+static inline void secHw_setUnsecure(uint32_t mask	/*  mask of type secHw_BLK_MASK_XXXXXX */
+    ) {
+	secHw_REGS_t *regp = (secHw_REGS_t *) MM_IO_BASE_TZPC;
+
+	if (mask & 0x0000FFFF) {
+		regp->reg[secHw_IDX_LS].setUnsecure = mask & 0x0000FFFF;
+	}
+	if (mask & 0xFFFF0000) {
+		regp->reg[secHw_IDX_MS].setUnsecure = mask >> 16;
+	}
+}
+
+/****************************************************************************/
+/**
+*  @brief  Get the trustzone status for all components. 1 = non-secure, 0 = secure
+*
+*/
+/****************************************************************************/
+static inline uint32_t secHw_getStatus(void)
+{
+	secHw_REGS_t *regp = (secHw_REGS_t *) MM_IO_BASE_TZPC;
+
+	return (regp->reg[1].status << 16) + regp->reg[0].status;
+}
+
+#endif /* SECHW_INLINE_H */
diff --git a/arch/arm/mach-bcmring/include/mach/csp/tmrHw_reg.h b/arch/arm/mach-bcmring/include/mach/csp/tmrHw_reg.h
new file mode 100644
index 000000000000..3080ac7239a1
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/tmrHw_reg.h
@@ -0,0 +1,82 @@
+/*****************************************************************************
+* Copyright 2004 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*  @file    tmrHw_reg.h
+*
+*  @brief   Definitions for low level Timer registers
+*
+*/
+/****************************************************************************/
+#ifndef _TMRHW_REG_H
+#define _TMRHW_REG_H
+
+#include <mach/csp/mm_io.h>
+#include <mach/csp/hw_cfg.h>
+/* Base address */
+#define tmrHw_MODULE_BASE_ADDR          MM_IO_BASE_TMR
+
+/*
+This platform has four different timers running at different clock speed
+
+Timer one   (Timer ID 0) runs at  25 MHz
+Timer two   (Timer ID 1) runs at  25 MHz
+Timer three (Timer ID 2) runs at 150 MHz
+Timer four  (Timer ID 3) runs at 150 MHz
+*/
+#define tmrHw_LOW_FREQUENCY_MHZ         25	/* Always 25MHz from XTAL */
+#define tmrHw_LOW_FREQUENCY_HZ          25000000
+
+#if defined(CFG_GLOBAL_CHIP) && (CFG_GLOBAL_CHIP == FPGA11107)
+#define tmrHw_HIGH_FREQUENCY_MHZ        150	/* Always 150MHz for FPGA */
+#define tmrHw_HIGH_FREQUENCY_HZ         150000000
+#else
+#define tmrHw_HIGH_FREQUENCY_HZ         HW_CFG_BUS_CLK_HZ
+#define tmrHw_HIGH_FREQUENCY_MHZ        (HW_CFG_BUS_CLK_HZ / 1000000)
+#endif
+
+#define tmrHw_LOW_RESOLUTION_CLOCK      tmrHw_LOW_FREQUENCY_HZ
+#define tmrHw_HIGH_RESOLUTION_CLOCK     tmrHw_HIGH_FREQUENCY_HZ
+#define tmrHw_MAX_COUNT                 (0xFFFFFFFF)	/* maximum number of count a timer can count */
+#define tmrHw_TIMER_NUM_COUNT           (4)	/* Number of timer module supported */
+
+typedef struct {
+	uint32_t LoadValue;	/* Load value for timer */
+	uint32_t CurrentValue;	/* Current value for timer */
+	uint32_t Control;	/* Control register */
+	uint32_t InterruptClear;	/* Interrupt clear register */
+	uint32_t RawInterruptStatus;	/* Raw interrupt status */
+	uint32_t InterruptStatus;	/* Masked interrupt status */
+	uint32_t BackgroundLoad;	/* Background load value */
+	uint32_t padding;	/* Padding register */
+} tmrHw_REG_t;
+
+/* Control bot masks */
+#define tmrHw_CONTROL_TIMER_ENABLE            0x00000080
+#define tmrHw_CONTROL_PERIODIC                0x00000040
+#define tmrHw_CONTROL_INTERRUPT_ENABLE        0x00000020
+#define tmrHw_CONTROL_PRESCALE_MASK           0x0000000C
+#define tmrHw_CONTROL_PRESCALE_1              0x00000000
+#define tmrHw_CONTROL_PRESCALE_16             0x00000004
+#define tmrHw_CONTROL_PRESCALE_256            0x00000008
+#define tmrHw_CONTROL_32BIT                   0x00000002
+#define tmrHw_CONTROL_ONESHOT                 0x00000001
+#define tmrHw_CONTROL_FREE_RUNNING            0x00000000
+
+#define tmrHw_CONTROL_MODE_MASK               (tmrHw_CONTROL_PERIODIC | tmrHw_CONTROL_ONESHOT)
+
+#define pTmrHw ((volatile tmrHw_REG_t *)tmrHw_MODULE_BASE_ADDR)
+
+#endif /* _TMRHW_REG_H */
diff --git a/arch/arm/mach-bcmring/include/mach/dma.h b/arch/arm/mach-bcmring/include/mach/dma.h
new file mode 100644
index 000000000000..847980c85c88
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/dma.h
@@ -0,0 +1,826 @@
+/*****************************************************************************
+* Copyright 2004 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*   @file   dma.h
+*
+*   @brief  API definitions for the linux DMA interface.
+*/
+/****************************************************************************/
+
+#if !defined(ASM_ARM_ARCH_BCMRING_DMA_H)
+#define ASM_ARM_ARCH_BCMRING_DMA_H
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#include <linux/kernel.h>
+#include <linux/wait.h>
+#include <linux/semaphore.h>
+#include <csp/dmacHw.h>
+#include <mach/timer.h>
+#include <linux/scatterlist.h>
+#include <linux/dma-mapping.h>
+#include <linux/mm.h>
+#include <linux/vmalloc.h>
+#include <linux/pagemap.h>
+
+/* ---- Constants and Types ---------------------------------------------- */
+
+/* If DMA_DEBUG_TRACK_RESERVATION is set to a non-zero value, then the filename */
+/* and line number of the reservation request will be recorded in the channel table */
+
+#define DMA_DEBUG_TRACK_RESERVATION   1
+
+#define DMA_NUM_CONTROLLERS     2
+#define DMA_NUM_CHANNELS        8	/* per controller */
+
+typedef enum {
+	DMA_DEVICE_MEM_TO_MEM,	/* For memory to memory transfers */
+	DMA_DEVICE_I2S0_DEV_TO_MEM,
+	DMA_DEVICE_I2S0_MEM_TO_DEV,
+	DMA_DEVICE_I2S1_DEV_TO_MEM,
+	DMA_DEVICE_I2S1_MEM_TO_DEV,
+	DMA_DEVICE_APM_CODEC_A_DEV_TO_MEM,
+	DMA_DEVICE_APM_CODEC_A_MEM_TO_DEV,
+	DMA_DEVICE_APM_CODEC_B_DEV_TO_MEM,
+	DMA_DEVICE_APM_CODEC_B_MEM_TO_DEV,
+	DMA_DEVICE_APM_CODEC_C_DEV_TO_MEM,	/* Additional mic input for beam-forming */
+	DMA_DEVICE_APM_PCM0_DEV_TO_MEM,
+	DMA_DEVICE_APM_PCM0_MEM_TO_DEV,
+	DMA_DEVICE_APM_PCM1_DEV_TO_MEM,
+	DMA_DEVICE_APM_PCM1_MEM_TO_DEV,
+	DMA_DEVICE_SPUM_DEV_TO_MEM,
+	DMA_DEVICE_SPUM_MEM_TO_DEV,
+	DMA_DEVICE_SPIH_DEV_TO_MEM,
+	DMA_DEVICE_SPIH_MEM_TO_DEV,
+	DMA_DEVICE_UART_A_DEV_TO_MEM,
+	DMA_DEVICE_UART_A_MEM_TO_DEV,
+	DMA_DEVICE_UART_B_DEV_TO_MEM,
+	DMA_DEVICE_UART_B_MEM_TO_DEV,
+	DMA_DEVICE_PIF_MEM_TO_DEV,
+	DMA_DEVICE_PIF_DEV_TO_MEM,
+	DMA_DEVICE_ESW_DEV_TO_MEM,
+	DMA_DEVICE_ESW_MEM_TO_DEV,
+	DMA_DEVICE_VPM_MEM_TO_MEM,
+	DMA_DEVICE_CLCD_MEM_TO_MEM,
+	DMA_DEVICE_NAND_MEM_TO_MEM,
+	DMA_DEVICE_MEM_TO_VRAM,
+	DMA_DEVICE_VRAM_TO_MEM,
+
+	/* Add new entries before this line. */
+
+	DMA_NUM_DEVICE_ENTRIES,
+	DMA_DEVICE_NONE = 0xff,	/* Special value to indicate that no device is currently assigned. */
+
+} DMA_Device_t;
+
+/****************************************************************************
+*
+*   The DMA_Handle_t is the primary object used by callers of the API.
+*
+*****************************************************************************/
+
+#define DMA_INVALID_HANDLE  ((DMA_Handle_t) -1)
+
+typedef int DMA_Handle_t;
+
+/****************************************************************************
+*
+*   The DMA_DescriptorRing_t contains a ring of descriptors which is used
+*   to point to regions of memory.
+*
+*****************************************************************************/
+
+typedef struct {
+	void *virtAddr;		/* Virtual Address of the descriptor ring */
+	dma_addr_t physAddr;	/* Physical address of the descriptor ring */
+	int descriptorsAllocated;	/* Number of descriptors allocated in the descriptor ring */
+	size_t bytesAllocated;	/* Number of bytes allocated in the descriptor ring */
+
+} DMA_DescriptorRing_t;
+
+/****************************************************************************
+*
+*   The DMA_MemType_t and DMA_MemMap_t are helper structures used to setup
+*   DMA chains from a variety of memory sources.
+*
+*****************************************************************************/
+
+#define DMA_MEM_MAP_MIN_SIZE    4096	/* Pages less than this size are better */
+					/* off not being DMA'd. */
+
+typedef enum {
+	DMA_MEM_TYPE_NONE,	/* Not a valid setting */
+	DMA_MEM_TYPE_VMALLOC,	/* Memory came from vmalloc call */
+	DMA_MEM_TYPE_KMALLOC,	/* Memory came from kmalloc call */
+	DMA_MEM_TYPE_DMA,	/* Memory came from dma_alloc_xxx call */
+	DMA_MEM_TYPE_USER,	/* Memory came from user space. */
+
+} DMA_MemType_t;
+
+/* A segment represents a physically and virtually contiguous chunk of memory. */
+/* i.e. each segment can be DMA'd */
+/* A user of the DMA code will add memory regions. Each region may need to be */
+/* represented by one or more segments. */
+
+typedef struct {
+	void *virtAddr;		/* Virtual address used for this segment */
+	dma_addr_t physAddr;	/* Physical address this segment maps to */
+	size_t numBytes;	/* Size of the segment, in bytes */
+
+} DMA_Segment_t;
+
+/* A region represents a virtually contiguous chunk of memory, which may be */
+/* made up of multiple segments. */
+
+typedef struct {
+	DMA_MemType_t memType;
+	void *virtAddr;
+	size_t numBytes;
+
+	/* Each region (virtually contiguous) consists of one or more segments. Each */
+	/* segment is virtually and physically contiguous. */
+
+	int numSegmentsUsed;
+	int numSegmentsAllocated;
+	DMA_Segment_t *segment;
+
+	/* When a region corresponds to user memory, we need to lock all of the pages */
+	/* down before we can figure out the physical addresses. The lockedPage array contains */
+	/* the pages that were locked, and which subsequently need to be unlocked once the */
+	/* memory is unmapped. */
+
+	unsigned numLockedPages;
+	struct page **lockedPages;
+
+} DMA_Region_t;
+
+typedef struct {
+	int inUse;		/* Is this mapping currently being used? */
+	struct semaphore lock;	/* Acquired when using this structure */
+	enum dma_data_direction dir;	/* Direction this transfer is intended for */
+
+	/* In the event that we're mapping user memory, we need to know which task */
+	/* the memory is for, so that we can obtain the correct mm locks. */
+
+	struct task_struct *userTask;
+
+	int numRegionsUsed;
+	int numRegionsAllocated;
+	DMA_Region_t *region;
+
+} DMA_MemMap_t;
+
+/****************************************************************************
+*
+*   The DMA_DeviceAttribute_t contains information which describes a
+*   particular DMA device (or peripheral).
+*
+*   It is anticipated that the arrary of DMA_DeviceAttribute_t's will be
+*   statically initialized.
+*
+*****************************************************************************/
+
+/* The device handler is called whenever a DMA operation completes. The reaon */
+/* for it to be called will be a bitmask with one or more of the following bits */
+/* set. */
+
+#define DMA_HANDLER_REASON_BLOCK_COMPLETE       dmacHw_INTERRUPT_STATUS_BLOCK
+#define DMA_HANDLER_REASON_TRANSFER_COMPLETE    dmacHw_INTERRUPT_STATUS_TRANS
+#define DMA_HANDLER_REASON_ERROR                dmacHw_INTERRUPT_STATUS_ERROR
+
+typedef void (*DMA_DeviceHandler_t) (DMA_Device_t dev, int reason,
+				     void *userData);
+
+#define DMA_DEVICE_FLAG_ON_DMA0             0x00000001
+#define DMA_DEVICE_FLAG_ON_DMA1             0x00000002
+#define DMA_DEVICE_FLAG_PORT_PER_DMAC       0x00000004	/* If set, it means that the port used on DMAC0 is different from the port used on DMAC1 */
+#define DMA_DEVICE_FLAG_ALLOC_DMA1_FIRST    0x00000008	/* If set, allocate from DMA1 before allocating from DMA0 */
+#define DMA_DEVICE_FLAG_IS_DEDICATED        0x00000100
+#define DMA_DEVICE_FLAG_NO_ISR              0x00000200
+#define DMA_DEVICE_FLAG_ALLOW_LARGE_FIFO    0x00000400
+#define DMA_DEVICE_FLAG_IN_USE              0x00000800	/* If set, device is in use on a channel */
+
+/* Note: Some DMA devices can be used from multiple DMA Controllers. The bitmask is used to */
+/*       determine which DMA controllers a given device can be used from, and the interface */
+/*       array determeines the actual interface number to use for a given controller. */
+
+typedef struct {
+	uint32_t flags;		/* Bitmask of DMA_DEVICE_FLAG_xxx constants */
+	uint8_t dedicatedController;	/* Controller number to use if DMA_DEVICE_FLAG_IS_DEDICATED is set. */
+	uint8_t dedicatedChannel;	/* Channel number to use if DMA_DEVICE_FLAG_IS_DEDICATED is set. */
+	const char *name;	/* Will show up in the /proc entry */
+
+	uint32_t dmacPort[DMA_NUM_CONTROLLERS];	/* Specifies the port number when DMA_DEVICE_FLAG_PORT_PER_DMAC flag is set */
+
+	dmacHw_CONFIG_t config;	/* Configuration to use when DMA'ing using this device */
+
+	void *userData;		/* Passed to the devHandler */
+	DMA_DeviceHandler_t devHandler;	/* Called when DMA operations finish. */
+
+	timer_tick_count_t transferStartTime;	/* Time the current transfer was started */
+
+	/* The following statistical information will be collected and presented in a proc entry. */
+	/* Note: With a contiuous bandwidth of 1 Gb/sec, it would take 584 years to overflow */
+	/*       a 64 bit counter. */
+
+	uint64_t numTransfers;	/* Number of DMA transfers performed */
+	uint64_t transferTicks;	/* Total time spent doing DMA transfers (measured in timer_tick_count_t's) */
+	uint64_t transferBytes;	/* Total bytes transferred */
+	uint32_t timesBlocked;	/* Number of times a channel was unavailable */
+	uint32_t numBytes;	/* Last transfer size */
+
+	/* It's not possible to free memory which is allocated for the descriptors from within */
+	/* the ISR. So make the presumption that a given device will tend to use the */
+	/* same sized buffers over and over again, and we keep them around. */
+
+	DMA_DescriptorRing_t ring;	/* Ring of descriptors allocated for this device */
+
+	/* We stash away some of the information from the previous transfer. If back-to-back */
+	/* transfers are performed from the same buffer, then we don't have to keep re-initializing */
+	/* the descriptor buffers. */
+
+	uint32_t prevNumBytes;
+	dma_addr_t prevSrcData;
+	dma_addr_t prevDstData;
+
+} DMA_DeviceAttribute_t;
+
+/****************************************************************************
+*
+*   DMA_Channel_t, DMA_Controller_t, and DMA_State_t are really internal
+*   data structures and don't belong in this header file, but are included
+*   merely for discussion.
+*
+*   By the time this is implemented, these structures will be moved out into
+*   the appropriate C source file instead.
+*
+*****************************************************************************/
+
+/****************************************************************************
+*
+*   The DMA_Channel_t contains state information about each DMA channel. Some
+*   of the channels are dedicated. Non-dedicated channels are shared
+*   amongst the other devices.
+*
+*****************************************************************************/
+
+#define DMA_CHANNEL_FLAG_IN_USE         0x00000001
+#define DMA_CHANNEL_FLAG_IS_DEDICATED   0x00000002
+#define DMA_CHANNEL_FLAG_NO_ISR         0x00000004
+#define DMA_CHANNEL_FLAG_LARGE_FIFO     0x00000008
+
+typedef struct {
+	uint32_t flags;		/* bitmask of DMA_CHANNEL_FLAG_xxx constants */
+	DMA_Device_t devType;	/* Device this channel is currently reserved for */
+	DMA_Device_t lastDevType;	/* Device type that used this previously */
+	char name[20];		/* Name passed onto request_irq */
+
+#if (DMA_DEBUG_TRACK_RESERVATION)
+	const char *fileName;	/* Place where channel reservation took place */
+	int lineNum;		/* Place where channel reservation took place */
+#endif
+	dmacHw_HANDLE_t dmacHwHandle;	/* low level channel handle. */
+
+} DMA_Channel_t;
+
+/****************************************************************************
+*
+*   The DMA_Controller_t contains state information about each DMA controller.
+*
+*   The freeChannelQ is stored in the controller data structure rather than
+*   the channel data structure since several of the devices are accessible
+*   from multiple controllers, and there is no way to know which controller
+*   will become available first.
+*
+*****************************************************************************/
+
+typedef struct {
+	DMA_Channel_t channel[DMA_NUM_CHANNELS];
+
+} DMA_Controller_t;
+
+/****************************************************************************
+*
+*   The DMA_Global_t contains all of the global state information used by
+*   the DMA code.
+*
+*   Callers which need to allocate a shared channel will be queued up
+*   on the freeChannelQ until a channel becomes available.
+*
+*****************************************************************************/
+
+typedef struct {
+	struct semaphore lock;	/* acquired when manipulating table entries */
+	wait_queue_head_t freeChannelQ;
+
+	DMA_Controller_t controller[DMA_NUM_CONTROLLERS];
+
+} DMA_Global_t;
+
+/* ---- Variable Externs ------------------------------------------------- */
+
+extern DMA_DeviceAttribute_t DMA_gDeviceAttribute[DMA_NUM_DEVICE_ENTRIES];
+
+/* ---- Function Prototypes ---------------------------------------------- */
+
+#if defined(__KERNEL__)
+
+/****************************************************************************/
+/**
+*   Initializes the DMA module.
+*
+*   @return
+*       0       - Success
+*       < 0     - Error
+*/
+/****************************************************************************/
+
+int dma_init(void);
+
+#if (DMA_DEBUG_TRACK_RESERVATION)
+DMA_Handle_t dma_request_channel_dbg(DMA_Device_t dev, const char *fileName,
+				     int lineNum);
+#define dma_request_channel(dev)  dma_request_channel_dbg(dev, __FILE__, __LINE__)
+#else
+
+/****************************************************************************/
+/**
+*   Reserves a channel for use with @a dev. If the device is setup to use
+*   a shared channel, then this function will block until a free channel
+*   becomes available.
+*
+*   @return
+*       >= 0    - A valid DMA Handle.
+*       -EBUSY  - Device is currently being used.
+*       -ENODEV - Device handed in is invalid.
+*/
+/****************************************************************************/
+
+DMA_Handle_t dma_request_channel(DMA_Device_t dev	/* Device to use with the allocated channel. */
+    );
+#endif
+
+/****************************************************************************/
+/**
+*   Frees a previously allocated DMA Handle.
+*
+*   @return
+*        0      - DMA Handle was released successfully.
+*       -EINVAL - Invalid DMA handle
+*/
+/****************************************************************************/
+
+int dma_free_channel(DMA_Handle_t channel	/* DMA handle. */
+    );
+
+/****************************************************************************/
+/**
+*   Determines if a given device has been configured as using a shared
+*   channel.
+*
+*   @return boolean
+*       0           Device uses a dedicated channel
+*       non-zero    Device uses a shared channel
+*/
+/****************************************************************************/
+
+int dma_device_is_channel_shared(DMA_Device_t dev	/* Device to check. */
+    );
+
+/****************************************************************************/
+/**
+*   Allocates memory to hold a descriptor ring. The descriptor ring then
+*   needs to be populated by making one or more calls to
+*   dna_add_descriptors.
+*
+*   The returned descriptor ring will be automatically initialized.
+*
+*   @return
+*       0           Descriptor ring was allocated successfully
+*       -ENOMEM     Unable to allocate memory for the desired number of descriptors.
+*/
+/****************************************************************************/
+
+int dma_alloc_descriptor_ring(DMA_DescriptorRing_t *ring,	/* Descriptor ring to populate */
+			      int numDescriptors	/* Number of descriptors that need to be allocated. */
+    );
+
+/****************************************************************************/
+/**
+*   Releases the memory which was previously allocated for a descriptor ring.
+*/
+/****************************************************************************/
+
+void dma_free_descriptor_ring(DMA_DescriptorRing_t *ring	/* Descriptor to release */
+    );
+
+/****************************************************************************/
+/**
+*   Initializes a descriptor ring, so that descriptors can be added to it.
+*   Once a descriptor ring has been allocated, it may be reinitialized for
+*   use with additional/different regions of memory.
+*
+*   Note that if 7 descriptors are allocated, it's perfectly acceptable to
+*   initialize the ring with a smaller number of descriptors. The amount
+*   of memory allocated for the descriptor ring will not be reduced, and
+*   the descriptor ring may be reinitialized later
+*
+*   @return
+*       0           Descriptor ring was initialized successfully
+*       -ENOMEM     The descriptor which was passed in has insufficient space
+*                   to hold the desired number of descriptors.
+*/
+/****************************************************************************/
+
+int dma_init_descriptor_ring(DMA_DescriptorRing_t *ring,	/* Descriptor ring to initialize */
+			     int numDescriptors	/* Number of descriptors to initialize. */
+    );
+
+/****************************************************************************/
+/**
+*   Determines the number of descriptors which would be required for a
+*   transfer of the indicated memory region.
+*
+*   This function also needs to know which DMA device this transfer will
+*   be destined for, so that the appropriate DMA configuration can be retrieved.
+*   DMA parameters such as transfer width, and whether this is a memory-to-memory
+*   or memory-to-peripheral, etc can all affect the actual number of descriptors
+*   required.
+*
+*   @return
+*       > 0     Returns the number of descriptors required for the indicated transfer
+*       -EINVAL Invalid device type for this kind of transfer
+*               (i.e. the device is _MEM_TO_DEV and not _DEV_TO_MEM)
+*       -ENOMEM Memory exhausted
+*/
+/****************************************************************************/
+
+int dma_calculate_descriptor_count(DMA_Device_t device,	/* DMA Device that this will be associated with */
+				   dma_addr_t srcData,	/* Place to get data to write to device */
+				   dma_addr_t dstData,	/* Pointer to device data address */
+				   size_t numBytes	/* Number of bytes to transfer to the device */
+    );
+
+/****************************************************************************/
+/**
+*   Adds a region of memory to the descriptor ring. Note that it may take
+*   multiple descriptors for each region of memory. It is the callers
+*   responsibility to allocate a sufficiently large descriptor ring.
+*
+*   @return
+*       0       Descriptors were added successfully
+*       -EINVAL Invalid device type for this kind of transfer
+*               (i.e. the device is _MEM_TO_DEV and not _DEV_TO_MEM)
+*       -ENOMEM Memory exhausted
+*/
+/****************************************************************************/
+
+int dma_add_descriptors(DMA_DescriptorRing_t *ring,	/* Descriptor ring to add descriptors to */
+			DMA_Device_t device,	/* DMA Device that descriptors are for */
+			dma_addr_t srcData,	/* Place to get data (memory or device) */
+			dma_addr_t dstData,	/* Place to put data (memory or device) */
+			size_t numBytes	/* Number of bytes to transfer to the device */
+    );
+
+/****************************************************************************/
+/**
+*   Sets the descriptor ring associated with a device.
+*
+*   Once set, the descriptor ring will be associated with the device, even
+*   across channel request/free calls. Passing in a NULL descriptor ring
+*   will release any descriptor ring currently associated with the device.
+*
+*   Note: If you call dma_transfer, or one of the other dma_alloc_ functions
+*         the descriptor ring may be released and reallocated.
+*
+*   Note: This function will release the descriptor memory for any current
+*         descriptor ring associated with this device.
+*/
+/****************************************************************************/
+
+int dma_set_device_descriptor_ring(DMA_Device_t device,	/* Device to update the descriptor ring for. */
+				   DMA_DescriptorRing_t *ring	/* Descriptor ring to add descriptors to */
+    );
+
+/****************************************************************************/
+/**
+*   Retrieves the descriptor ring associated with a device.
+*/
+/****************************************************************************/
+
+int dma_get_device_descriptor_ring(DMA_Device_t device,	/* Device to retrieve the descriptor ring for. */
+				   DMA_DescriptorRing_t *ring	/* Place to store retrieved ring */
+    );
+
+/****************************************************************************/
+/**
+*   Allocates buffers for the descriptors. This is normally done automatically
+*   but needs to be done explicitly when initiating a dma from interrupt
+*   context.
+*
+*   @return
+*       0       Descriptors were allocated successfully
+*       -EINVAL Invalid device type for this kind of transfer
+*               (i.e. the device is _MEM_TO_DEV and not _DEV_TO_MEM)
+*       -ENOMEM Memory exhausted
+*/
+/****************************************************************************/
+
+int dma_alloc_descriptors(DMA_Handle_t handle,	/* DMA Handle */
+			  dmacHw_TRANSFER_TYPE_e transferType,	/* Type of transfer being performed */
+			  dma_addr_t srcData,	/* Place to get data to write to device */
+			  dma_addr_t dstData,	/* Pointer to device data address */
+			  size_t numBytes	/* Number of bytes to transfer to the device */
+    );
+
+/****************************************************************************/
+/**
+*   Allocates and sets up descriptors for a double buffered circular buffer.
+*
+*   This is primarily intended to be used for things like the ingress samples
+*   from a microphone.
+*
+*   @return
+*       > 0     Number of descriptors actually allocated.
+*       -EINVAL Invalid device type for this kind of transfer
+*               (i.e. the device is _MEM_TO_DEV and not _DEV_TO_MEM)
+*       -ENOMEM Memory exhausted
+*/
+/****************************************************************************/
+
+int dma_alloc_double_dst_descriptors(DMA_Handle_t handle,	/* DMA Handle */
+				     dma_addr_t srcData,	/* Physical address of source data */
+				     dma_addr_t dstData1,	/* Physical address of first destination buffer */
+				     dma_addr_t dstData2,	/* Physical address of second destination buffer */
+				     size_t numBytes	/* Number of bytes in each destination buffer */
+    );
+
+/****************************************************************************/
+/**
+*   Initializes a DMA_MemMap_t data structure
+*/
+/****************************************************************************/
+
+int dma_init_mem_map(DMA_MemMap_t *memMap	/* Stores state information about the map */
+    );
+
+/****************************************************************************/
+/**
+*   Releases any memory currently being held by a memory mapping structure.
+*/
+/****************************************************************************/
+
+int dma_term_mem_map(DMA_MemMap_t *memMap	/* Stores state information about the map */
+    );
+
+/****************************************************************************/
+/**
+*   Looks at a memory address and categorizes it.
+*
+*   @return One of the values from the DMA_MemType_t enumeration.
+*/
+/****************************************************************************/
+
+DMA_MemType_t dma_mem_type(void *addr);
+
+/****************************************************************************/
+/**
+*   Sets the process (aka userTask) associated with a mem map. This is
+*   required if user-mode segments will be added to the mapping.
+*/
+/****************************************************************************/
+
+static inline void dma_mem_map_set_user_task(DMA_MemMap_t *memMap,
+					     struct task_struct *task)
+{
+	memMap->userTask = task;
+}
+
+/****************************************************************************/
+/**
+*   Looks at a memory address and determines if we support DMA'ing to/from
+*   that type of memory.
+*
+*   @return boolean -
+*               return value != 0 means dma supported
+*               return value == 0 means dma not supported
+*/
+/****************************************************************************/
+
+int dma_mem_supports_dma(void *addr);
+
+/****************************************************************************/
+/**
+*   Initializes a memory map for use. Since this function acquires a
+*   sempaphore within the memory map, it is VERY important that dma_unmap
+*   be called when you're finished using the map.
+*/
+/****************************************************************************/
+
+int dma_map_start(DMA_MemMap_t *memMap,	/* Stores state information about the map */
+		  enum dma_data_direction dir	/* Direction that the mapping will be going */
+    );
+
+/****************************************************************************/
+/**
+*   Adds a segment of memory to a memory map.
+*
+*   @return     0 on success, error code otherwise.
+*/
+/****************************************************************************/
+
+int dma_map_add_region(DMA_MemMap_t *memMap,	/* Stores state information about the map */
+		       void *mem,	/* Virtual address that we want to get a map of */
+		       size_t numBytes	/* Number of bytes being mapped */
+    );
+
+/****************************************************************************/
+/**
+*   Creates a descriptor ring from a memory mapping.
+*
+*   @return 0 on sucess, error code otherwise.
+*/
+/****************************************************************************/
+
+int dma_map_create_descriptor_ring(DMA_Device_t dev,	/* DMA device (where the ring is stored) */
+				   DMA_MemMap_t *memMap,	/* Memory map that will be used */
+				   dma_addr_t devPhysAddr	/* Physical address of device */
+    );
+
+/****************************************************************************/
+/**
+*   Maps in a memory region such that it can be used for performing a DMA.
+*
+*   @return
+*/
+/****************************************************************************/
+
+int dma_map_mem(DMA_MemMap_t *memMap,	/* Stores state information about the map */
+		void *addr,	/* Virtual address that we want to get a map of */
+		size_t count,	/* Number of bytes being mapped */
+		enum dma_data_direction dir	/* Direction that the mapping will be going */
+    );
+
+/****************************************************************************/
+/**
+*   Maps in a memory region such that it can be used for performing a DMA.
+*
+*   @return
+*/
+/****************************************************************************/
+
+int dma_unmap(DMA_MemMap_t *memMap,	/* Stores state information about the map */
+	      int dirtied	/* non-zero if any of the pages were modified */
+    );
+
+/****************************************************************************/
+/**
+*   Initiates a transfer when the descriptors have already been setup.
+*
+*   This is a special case, and normally, the dma_transfer_xxx functions should
+*   be used.
+*
+*   @return
+*       0       Transfer was started successfully
+*       -ENODEV Invalid handle
+*/
+/****************************************************************************/
+
+int dma_start_transfer(DMA_Handle_t handle);
+
+/****************************************************************************/
+/**
+*   Stops a previously started DMA transfer.
+*
+*   @return
+*       0       Transfer was stopped successfully
+*       -ENODEV Invalid handle
+*/
+/****************************************************************************/
+
+int dma_stop_transfer(DMA_Handle_t handle);
+
+/****************************************************************************/
+/**
+*   Waits for a DMA to complete by polling. This function is only intended
+*   to be used for testing. Interrupts should be used for most DMA operations.
+*/
+/****************************************************************************/
+
+int dma_wait_transfer_done(DMA_Handle_t handle);
+
+/****************************************************************************/
+/**
+*   Initiates a DMA transfer
+*
+*   @return
+*       0       Transfer was started successfully
+*       -EINVAL Invalid device type for this kind of transfer
+*               (i.e. the device is _MEM_TO_DEV and not _DEV_TO_MEM)
+*/
+/****************************************************************************/
+
+int dma_transfer(DMA_Handle_t handle,	/* DMA Handle */
+		 dmacHw_TRANSFER_TYPE_e transferType,	/* Type of transfer being performed */
+		 dma_addr_t srcData,	/* Place to get data to write to device */
+		 dma_addr_t dstData,	/* Pointer to device data address */
+		 size_t numBytes	/* Number of bytes to transfer to the device */
+    );
+
+/****************************************************************************/
+/**
+*   Initiates a transfer from memory to a device.
+*
+*   @return
+*       0       Transfer was started successfully
+*       -EINVAL Invalid device type for this kind of transfer
+*               (i.e. the device is _DEV_TO_MEM and not _MEM_TO_DEV)
+*/
+/****************************************************************************/
+
+static inline int dma_transfer_to_device(DMA_Handle_t handle,	/* DMA Handle */
+					 dma_addr_t srcData,	/* Place to get data to write to device (physical address) */
+					 dma_addr_t dstData,	/* Pointer to device data address (physical address) */
+					 size_t numBytes	/* Number of bytes to transfer to the device */
+    ) {
+	return dma_transfer(handle,
+			    dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
+			    srcData, dstData, numBytes);
+}
+
+/****************************************************************************/
+/**
+*   Initiates a transfer from a device to memory.
+*
+*   @return
+*       0       Transfer was started successfully
+*       -EINVAL Invalid device type for this kind of transfer
+*               (i.e. the device is _MEM_TO_DEV and not _DEV_TO_MEM)
+*/
+/****************************************************************************/
+
+static inline int dma_transfer_from_device(DMA_Handle_t handle,	/* DMA Handle */
+					   dma_addr_t srcData,	/* Pointer to the device data address (physical address) */
+					   dma_addr_t dstData,	/* Place to store data retrieved from the device (physical address) */
+					   size_t numBytes	/* Number of bytes to retrieve from the device */
+    ) {
+	return dma_transfer(handle,
+			    dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
+			    srcData, dstData, numBytes);
+}
+
+/****************************************************************************/
+/**
+*   Initiates a memory to memory transfer.
+*
+*   @return
+*       0       Transfer was started successfully
+*       -EINVAL Invalid device type for this kind of transfer
+*               (i.e. the device wasn't DMA_DEVICE_MEM_TO_MEM)
+*/
+/****************************************************************************/
+
+static inline int dma_transfer_mem_to_mem(DMA_Handle_t handle,	/* DMA Handle */
+					  dma_addr_t srcData,	/* Place to transfer data from (physical address) */
+					  dma_addr_t dstData,	/* Place to transfer data to (physical address) */
+					  size_t numBytes	/* Number of bytes to transfer */
+    ) {
+	return dma_transfer(handle,
+			    dmacHw_TRANSFER_TYPE_MEM_TO_MEM,
+			    srcData, dstData, numBytes);
+}
+
+/****************************************************************************/
+/**
+*   Set the callback function which will be called when a transfer completes.
+*   If a NULL callback function is set, then no callback will occur.
+*
+*   @note   @a devHandler will be called from IRQ context.
+*
+*   @return
+*       0       - Success
+*       -ENODEV - Device handed in is invalid.
+*/
+/****************************************************************************/
+
+int dma_set_device_handler(DMA_Device_t dev,	/* Device to set the callback for. */
+			   DMA_DeviceHandler_t devHandler,	/* Function to call when the DMA completes */
+			   void *userData	/* Pointer which will be passed to devHandler. */
+    );
+
+#endif
+
+#endif /* ASM_ARM_ARCH_BCMRING_DMA_H */
diff --git a/arch/arm/mach-bcmring/include/mach/entry-macro.S b/arch/arm/mach-bcmring/include/mach/entry-macro.S
new file mode 100644
index 000000000000..7d393ca010ac
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/entry-macro.S
@@ -0,0 +1,86 @@
+/*****************************************************************************
+* Copyright 2006 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/*
+ *
+ * Low-level IRQ helper macros for BCMRing-based platforms
+ *
+ */
+#include <mach/irqs.h>
+#include <mach/hardware.h>
+#include <mach/csp/mm_io.h>
+
+		.macro	disable_fiq
+		.endm
+
+		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+		ldr	\base, =(MM_IO_BASE_INTC0)
+		ldr	\irqstat, [\base, #0]		@ get status
+                ldr     \irqnr, [\base, #0x10]          @ mask with enable register
+                ands    \irqstat, \irqstat, \irqnr
+		mov	\irqnr, #IRQ_INTC0_START
+		cmp	\irqstat, #0
+		bne	1001f
+
+		ldr	\base, =(MM_IO_BASE_INTC1)
+		ldr	\irqstat, [\base, #0]		@ get status
+                ldr     \irqnr, [\base, #0x10]          @ mask with enable register
+                ands    \irqstat, \irqstat, \irqnr
+		mov	\irqnr, #IRQ_INTC1_START
+		cmp	\irqstat, #0
+		bne	1001f
+
+		ldr	\base, =(MM_IO_BASE_SINTC)
+		ldr	\irqstat, [\base, #0]		@ get status
+                ldr     \irqnr, [\base, #0x10]          @ mask with enable register
+                ands    \irqstat, \irqstat, \irqnr
+		mov	\irqnr, #0xffffffff             @ code meaning no interrupt bits set
+		cmp	\irqstat, #0
+		beq	1002f
+
+		mov	\irqnr, #IRQ_SINTC_START        @ something is set, so fixup return value
+
+1001:
+		movs	\tmp, \irqstat, lsl #16
+		movne	\irqstat, \tmp
+		addeq	\irqnr, \irqnr, #16
+
+		movs	\tmp, \irqstat, lsl #8
+		movne	\irqstat, \tmp
+		addeq	\irqnr, \irqnr, #8
+
+		movs	\tmp, \irqstat, lsl #4
+		movne	\irqstat, \tmp
+		addeq	\irqnr, \irqnr, #4
+
+		movs	\tmp, \irqstat, lsl #2
+		movne	\irqstat, \tmp
+		addeq	\irqnr, \irqnr, #2
+
+		movs	\tmp, \irqstat, lsl #1
+		addeq	\irqnr, \irqnr, #1
+		orrs	\base, \base, #1
+
+1002:           @ irqnr will be set to 0xffffffff if no irq bits are set
+		.endm
+
+		.macro  get_irqnr_preamble, base, tmp
+		.endm
+
+		.macro  arch_ret_to_user, tmp1, tmp2
+		.endm
+
+		.macro	irq_prio_table
+		.endm
+
diff --git a/arch/arm/mach-bcmring/include/mach/hardware.h b/arch/arm/mach-bcmring/include/mach/hardware.h
new file mode 100644
index 000000000000..447eb340c611
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/hardware.h
@@ -0,0 +1,60 @@
+/*
+ *
+ *  This file contains the hardware definitions of the BCMRing.
+ *
+ *  Copyright (C) 1999 ARM Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <asm/sizes.h>
+#include <mach/memory.h>
+#include <cfg_global.h>
+#include <mach/csp/mm_io.h>
+
+/* Hardware addresses of major areas.
+ *  *_START is the physical address
+ *  *_SIZE  is the size of the region
+ *  *_BASE  is the virtual address
+ */
+#define RAM_START               PHYS_OFFSET
+
+#define RAM_SIZE                (CFG_GLOBAL_RAM_SIZE-CFG_GLOBAL_RAM_SIZE_RESERVED)
+#define RAM_BASE                PAGE_OFFSET
+
+#define pcibios_assign_all_busses()	1
+
+/* Macros to make managing spinlocks a bit more controlled in terms of naming. */
+/* See reg_gpio.h, reg_irq.h, arch.c, gpio.c for example usage. */
+#if defined(__KERNEL__)
+#define HW_DECLARE_SPINLOCK(name)  DEFINE_SPINLOCK(bcmring_##name##_reg_lock);
+#define HW_EXTERN_SPINLOCK(name)   extern spinlock_t bcmring_##name##_reg_lock;
+#define HW_IRQ_SAVE(name, val)     spin_lock_irqsave(&bcmring_##name##_reg_lock, (val))
+#define HW_IRQ_RESTORE(name, val)  spin_unlock_irqrestore(&bcmring_##name##_reg_lock, (val))
+#else
+#define HW_DECLARE_SPINLOCK(name)
+#define HW_EXTERN_SPINLOCK(name)
+#define HW_IRQ_SAVE(name, val)     {(void)(name); (void)(val); }
+#define HW_IRQ_RESTORE(name, val)  {(void)(name); (void)(val); }
+#endif
+
+#ifndef HW_IO_PHYS_TO_VIRT
+#define HW_IO_PHYS_TO_VIRT MM_IO_PHYS_TO_VIRT
+#endif
+#define HW_IO_VIRT_TO_PHYS MM_IO_VIRT_TO_PHYS
+
+#endif
diff --git a/arch/arm/mach-bcmring/include/mach/io.h b/arch/arm/mach-bcmring/include/mach/io.h
new file mode 100644
index 000000000000..4db0eff90357
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/io.h
@@ -0,0 +1,56 @@
+/*
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#include <mach/hardware.h>
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+#define __io(a)         ((void __iomem *)HW_IO_PHYS_TO_VIRT(a))
+
+/* Do not enable mem_pci for a big endian arm architecture or unexpected byteswaps will */
+/* happen in readw/writew etc. */
+
+#define readb(c)        __raw_readb(c)
+#define readw(c)        __raw_readw(c)
+#define readl(c)        __raw_readl(c)
+#define readb_relaxed(addr) readb(addr)
+#define readw_relaxed(addr) readw(addr)
+#define readl_relaxed(addr) readl(addr)
+
+#define readsb(p, d, l)   __raw_readsb(p, d, l)
+#define readsw(p, d, l)   __raw_readsw(p, d, l)
+#define readsl(p, d, l)   __raw_readsl(p, d, l)
+
+#define writeb(v, c)     __raw_writeb(v, c)
+#define writew(v, c)     __raw_writew(v, c)
+#define writel(v, c)     __raw_writel(v, c)
+
+#define writesb(p, d, l)  __raw_writesb(p, d, l)
+#define writesw(p, d, l)  __raw_writesw(p, d, l)
+#define writesl(p, d, l)  __raw_writesl(p, d, l)
+
+#define memset_io(c, v, l)    _memset_io((c), (v), (l))
+#define memcpy_fromio(a, c, l)    _memcpy_fromio((a), (c), (l))
+#define memcpy_toio(c, a, l)  _memcpy_toio((c), (a), (l))
+
+#define eth_io_copy_and_sum(s, c, l, b) eth_copy_and_sum((s), (c), (l), (b))
+
+#endif
diff --git a/arch/arm/mach-bcmring/include/mach/irqs.h b/arch/arm/mach-bcmring/include/mach/irqs.h
new file mode 100644
index 000000000000..b279b825d4a7
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/irqs.h
@@ -0,0 +1,132 @@
+/*
+ *  Copyright (C) 2007 Broadcom
+ *  Copyright (C) 1999 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#if !defined(ARCH_BCMRING_IRQS_H)
+#define ARCH_BCMRING_IRQS_H
+
+/* INTC0 - interrupt controller 0 */
+#define IRQ_INTC0_START     0
+#define IRQ_DMA0C0          0	/* DMA0 channel 0 interrupt */
+#define IRQ_DMA0C1          1	/* DMA0 channel 1 interrupt */
+#define IRQ_DMA0C2          2	/* DMA0 channel 2 interrupt */
+#define IRQ_DMA0C3          3	/* DMA0 channel 3 interrupt */
+#define IRQ_DMA0C4          4	/* DMA0 channel 4 interrupt */
+#define IRQ_DMA0C5          5	/* DMA0 channel 5 interrupt */
+#define IRQ_DMA0C6          6	/* DMA0 channel 6 interrupt */
+#define IRQ_DMA0C7          7	/* DMA0 channel 7 interrupt */
+#define IRQ_DMA1C0          8	/* DMA1 channel 0 interrupt */
+#define IRQ_DMA1C1          9	/* DMA1 channel 1 interrupt */
+#define IRQ_DMA1C2         10	/* DMA1 channel 2 interrupt */
+#define IRQ_DMA1C3         11	/* DMA1 channel 3 interrupt */
+#define IRQ_DMA1C4         12	/* DMA1 channel 4 interrupt */
+#define IRQ_DMA1C5         13	/* DMA1 channel 5 interrupt */
+#define IRQ_DMA1C6         14	/* DMA1 channel 6 interrupt */
+#define IRQ_DMA1C7         15	/* DMA1 channel 7 interrupt */
+#define IRQ_VPM            16	/* Voice process module interrupt */
+#define IRQ_USBHD2         17	/* USB host2/device2 interrupt */
+#define IRQ_USBH1          18	/* USB1 host interrupt */
+#define IRQ_USBD           19	/* USB device interrupt */
+#define IRQ_SDIOH0         20	/* SDIO0 host interrupt */
+#define IRQ_SDIOH1         21	/* SDIO1 host interrupt */
+#define IRQ_TIMER0         22	/* Timer0 interrupt */
+#define IRQ_TIMER1         23	/* Timer1 interrupt */
+#define IRQ_TIMER2         24	/* Timer2 interrupt */
+#define IRQ_TIMER3         25	/* Timer3 interrupt */
+#define IRQ_SPIH           26	/* SPI host interrupt */
+#define IRQ_ESW            27	/* Ethernet switch interrupt */
+#define IRQ_APM            28	/* Audio process module interrupt */
+#define IRQ_GE             29	/* Graphic engine interrupt */
+#define IRQ_CLCD           30	/* LCD Controller interrupt */
+#define IRQ_PIF            31	/* Peripheral interface interrupt */
+#define IRQ_INTC0_END      31
+
+/* INTC1 - interrupt controller 1 */
+#define IRQ_INTC1_START    32
+#define IRQ_GPIO0          32	/*  0 GPIO bit 31//0 combined interrupt */
+#define IRQ_GPIO1          33	/*  1 GPIO bit 64//32 combined interrupt */
+#define IRQ_I2S0           34	/*  2 I2S0 interrupt */
+#define IRQ_I2S1           35	/*  3 I2S1 interrupt */
+#define IRQ_I2CH           36	/*  4 I2C host interrupt */
+#define IRQ_I2CS           37	/*  5 I2C slave interrupt */
+#define IRQ_SPIS           38	/*  6 SPI slave interrupt */
+#define IRQ_GPHY           39	/*  7 Gigabit Phy interrupt */
+#define IRQ_FLASHC         40	/*  8 Flash controller interrupt */
+#define IRQ_COMMTX         41	/*  9 ARM DDC transmit interrupt */
+#define IRQ_COMMRX         42	/* 10 ARM DDC receive interrupt */
+#define IRQ_PMUIRQ         43	/* 11 ARM performance monitor interrupt */
+#define IRQ_UARTB          44	/* 12 UARTB */
+#define IRQ_WATCHDOG       45	/* 13 Watchdog timer interrupt */
+#define IRQ_UARTA          46	/* 14 UARTA */
+#define IRQ_TSC            47	/* 15 Touch screen controller interrupt */
+#define IRQ_KEYC           48	/* 16 Key pad controller interrupt */
+#define IRQ_DMPU           49	/* 17 DDR2 memory partition interrupt */
+#define IRQ_VMPU           50	/* 18 VRAM memory partition interrupt */
+#define IRQ_FMPU           51	/* 19 Flash memory parition unit interrupt */
+#define IRQ_RNG            52	/* 20 Random number generator interrupt */
+#define IRQ_RTC0           53	/* 21 Real time clock periodic interrupt */
+#define IRQ_RTC1           54	/* 22 Real time clock one-shot interrupt */
+#define IRQ_SPUM           55	/* 23 Secure process module interrupt */
+#define IRQ_VDEC           56	/* 24 Hantro video decoder interrupt */
+#define IRQ_RTC2           57	/* 25 Real time clock tamper interrupt */
+#define IRQ_DDRP           58	/* 26 DDR Panic interrupt */
+#define IRQ_INTC1_END      58
+
+/* SINTC secure int controller */
+#define IRQ_SINTC_START    59
+#define IRQ_SEC_WATCHDOG   59	/*  0 Watchdog timer interrupt */
+#define IRQ_SEC_UARTA      60	/*  1 UARTA interrupt */
+#define IRQ_SEC_TSC        61	/*  2 Touch screen controller interrupt */
+#define IRQ_SEC_KEYC       62	/*  3 Key pad controller interrupt */
+#define IRQ_SEC_DMPU       63	/*  4 DDR2 memory partition interrupt */
+#define IRQ_SEC_VMPU       64	/*  5 VRAM memory partition interrupt */
+#define IRQ_SEC_FMPU       65	/*  6 Flash memory parition unit interrupt */
+#define IRQ_SEC_RNG        66	/*  7 Random number generator interrupt */
+#define IRQ_SEC_RTC0       67	/*  8 Real time clock periodic interrupt */
+#define IRQ_SEC_RTC1       68	/*  9 Real time clock one-shot interrupt */
+#define IRQ_SEC_SPUM       69	/* 10 Secure process module interrupt */
+#define IRQ_SEC_TIMER0     70	/* 11 Secure timer0 interrupt */
+#define IRQ_SEC_TIMER1     71	/* 12 Secure timer1 interrupt */
+#define IRQ_SEC_TIMER2     72	/* 13 Secure timer2 interrupt */
+#define IRQ_SEC_TIMER3     73	/* 14 Secure timer3 interrupt */
+#define IRQ_SEC_RTC2       74	/* 15 Real time clock tamper interrupt */
+
+#define IRQ_SINTC_END      74
+
+/* Note: there are 3 INTC registers of 32 bits each. So internal IRQs could go from 0-95 */
+/*       Since IRQs are typically viewed in decimal, we start the gpio based IRQs off at 100 */
+/*       to make the mapping easy for humans to decipher. */
+
+#define IRQ_GPIO_0                  100
+
+#define NUM_INTERNAL_IRQS          (IRQ_SINTC_END+1)
+
+/* I couldn't get the gpioHw_reg.h file to be included cleanly, so I hardcoded it */
+/* define NUM_GPIO_IRQS               GPIOHW_TOTAL_NUM_PINS */
+#define NUM_GPIO_IRQS               62
+
+#define NR_IRQS                     (IRQ_GPIO_0 + NUM_GPIO_IRQS)
+
+#define IRQ_UNKNOWN                 -1
+
+/* Tune these bits to preclude noisy or unsupported interrupt sources as required. */
+#define IRQ_INTC0_VALID_MASK        0xffffffff
+#define IRQ_INTC1_VALID_MASK        0x07ffffff
+#define IRQ_SINTC_VALID_MASK        0x0000ffff
+
+#endif /* ARCH_BCMRING_IRQS_H */
diff --git a/arch/arm/mach-bcmring/include/mach/memory.h b/arch/arm/mach-bcmring/include/mach/memory.h
new file mode 100644
index 000000000000..114f942bb4f3
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/memory.h
@@ -0,0 +1,33 @@
+/*****************************************************************************
+* Copyright 2005 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#include <cfg_global.h>
+
+/*
+ * Physical vs virtual RAM address space conversion.  These are
+ * private definitions which should NOT be used outside memory.h
+ * files.  Use virt_to_phys/phys_to_virt/__pa/__va instead.
+ */
+
+#define PHYS_OFFSET CFG_GLOBAL_RAM_BASE
+
+/*
+ * Maximum DMA memory allowed is 14M
+ */
+#define CONSISTENT_DMA_SIZE (SZ_16M - SZ_2M)
+
+#endif
diff --git a/arch/arm/mach-bcmring/include/mach/memory_settings.h b/arch/arm/mach-bcmring/include/mach/memory_settings.h
new file mode 100644
index 000000000000..ce5cd16f2ac4
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/memory_settings.h
@@ -0,0 +1,67 @@
+/*****************************************************************************
+* Copyright 2004 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#ifndef MEMORY_SETTINGS_H
+#define MEMORY_SETTINGS_H
+
+/* ---- Include Files ---------------------------------------- */
+/* ---- Constants and Types ---------------------------------- */
+
+/* Memory devices */
+/* NAND Flash timing for 166 MHz setting */
+#define HW_CFG_NAND_tBTA  (5 << 16)	/* Bus turnaround cycle (n)        0-7  (30 ns) */
+#define HW_CFG_NAND_tWP   (4 << 11)	/* Write pulse width cycle (n+1)   0-31 (25 ns) */
+#define HW_CFG_NAND_tWR   (1 << 9)	/* Write recovery cycle (n+1)      0-3  (10 ns) */
+#define HW_CFG_NAND_tAS   (0 << 7)	/* Write address setup cycle (n+1) 0-3  ( 0 ns) */
+#define HW_CFG_NAND_tOE   (3 << 5)	/* Output enable delay cycle (n)   0-3  (15 ns) */
+#define HW_CFG_NAND_tRC   (7 << 0)	/* Read access cycle (n+2)         0-31 (50 ns) */
+
+#define HW_CFG_NAND_TCR (HW_CFG_NAND_tBTA \
+	| HW_CFG_NAND_tWP  \
+	| HW_CFG_NAND_tWR  \
+	| HW_CFG_NAND_tAS  \
+	| HW_CFG_NAND_tOE  \
+	| HW_CFG_NAND_tRC)
+
+/* NOR Flash timing for 166 MHz setting */
+#define HW_CFG_NOR_TPRC_TWLC (0 << 19)	/* Page read access cycle / Burst write latency (n+2 / n+1) (max 25ns) */
+#define HW_CFG_NOR_TBTA      (0 << 16)	/* Bus turnaround cycle (n)                                 (DNA)      */
+#define HW_CFG_NOR_TWP       (6 << 11)	/* Write pulse width cycle (n+1)                            (35ns)     */
+#define HW_CFG_NOR_TWR       (0 << 9)	/* Write recovery cycle (n+1)                               (0ns)      */
+#define HW_CFG_NOR_TAS       (0 << 7)	/* Write address setup cycle (n+1)                          (0ns)      */
+#define HW_CFG_NOR_TOE       (0 << 5)	/* Output enable delay cycle (n)                            (max 25ns) */
+#define HW_CFG_NOR_TRC_TLC   (0x10 << 0)	/* Read access cycle / Burst read latency (n+2 / n+1)       (100ns)    */
+
+#define HW_CFG_FLASH0_TCR (HW_CFG_NOR_TPRC_TWLC \
+	| HW_CFG_NOR_TBTA      \
+	| HW_CFG_NOR_TWP       \
+	| HW_CFG_NOR_TWR       \
+	| HW_CFG_NOR_TAS       \
+	| HW_CFG_NOR_TOE       \
+	| HW_CFG_NOR_TRC_TLC)
+
+#define HW_CFG_FLASH1_TCR    HW_CFG_FLASH0_TCR
+#define HW_CFG_FLASH2_TCR    HW_CFG_FLASH0_TCR
+
+/* SDRAM Settings */
+/* #define HW_CFG_SDRAM_CAS_LATENCY        5    Default 5, Values [3..6] */
+/* #define HW_CFG_SDRAM_CHIP_SELECT_CNT    1    Default 1, Vaules [1..2] */
+/* #define HW_CFG_SDRAM_SPEED_GRADE        667  Default 667, Values [400,533,667,800] */
+/* #define HW_CFG_SDRAM_WIDTH_BITS         16   Default 16, Vaules [8,16] */
+#define HW_CFG_SDRAM_SIZE_BYTES         0x10000000	/* Total memory, not per device size */
+
+/* ---- Variable Externs ------------------------------------- */
+/* ---- Function Prototypes ---------------------------------- */
+
+#endif /* MEMORY_SETTINGS_H */
diff --git a/arch/arm/mach-bcmring/include/mach/system.h b/arch/arm/mach-bcmring/include/mach/system.h
new file mode 100644
index 000000000000..cdbf93c694a6
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/system.h
@@ -0,0 +1,54 @@
+/*
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <mach/csp/chipcHw_inline.h>
+
+extern int bcmring_arch_warm_reboot;
+
+static inline void arch_idle(void)
+{
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode, char *cmd)
+{
+	printk("arch_reset:%c %x\n", mode, bcmring_arch_warm_reboot);
+
+	if (mode == 'h') {
+		/* Reboot configured in proc entry */
+		if (bcmring_arch_warm_reboot) {
+			printk("warm reset\n");
+			/* Issue Warm reset (do not reset ethernet switch, keep alive) */
+			chipcHw_reset(chipcHw_REG_SOFT_RESET_CHIP_WARM);
+		} else {
+			/* Force reset of everything */
+			printk("force reset\n");
+			chipcHw_reset(chipcHw_REG_SOFT_RESET_CHIP_SOFT);
+		}
+	} else {
+		/* Force reset of everything */
+		printk("force reset\n");
+		chipcHw_reset(chipcHw_REG_SOFT_RESET_CHIP_SOFT);
+	}
+}
+
+#endif
diff --git a/arch/arm/mach-bcmring/include/mach/timer.h b/arch/arm/mach-bcmring/include/mach/timer.h
new file mode 100644
index 000000000000..5a94bbb032b6
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/timer.h
@@ -0,0 +1,77 @@
+/*****************************************************************************
+* Copyright 2004 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/*
+*
+*****************************************************************************
+*
+*  timer.h
+*
+*  PURPOSE:
+*
+*
+*
+*  NOTES:
+*
+*****************************************************************************/
+
+#if !defined(BCM_LINUX_TIMER_H)
+#define BCM_LINUX_TIMER_H
+
+#if defined(__KERNEL__)
+
+/* ---- Include Files ---------------------------------------------------- */
+/* ---- Constants and Types ---------------------------------------------- */
+
+typedef unsigned int timer_tick_count_t;
+typedef unsigned int timer_tick_rate_t;
+typedef unsigned int timer_msec_t;
+
+/* ---- Variable Externs ------------------------------------------------- */
+/* ---- Function Prototypes ---------------------------------------------- */
+
+/****************************************************************************
+*
+*  timer_get_tick_count
+*
+*
+***************************************************************************/
+timer_tick_count_t timer_get_tick_count(void);
+
+/****************************************************************************
+*
+*  timer_get_tick_rate
+*
+*
+***************************************************************************/
+timer_tick_rate_t timer_get_tick_rate(void);
+
+/****************************************************************************
+*
+*  timer_get_msec
+*
+*
+***************************************************************************/
+timer_msec_t timer_get_msec(void);
+
+/****************************************************************************
+*
+*  timer_ticks_to_msec
+*
+*
+***************************************************************************/
+timer_msec_t timer_ticks_to_msec(timer_tick_count_t ticks);
+
+#endif /* __KERNEL__ */
+#endif /* BCM_LINUX_TIMER_H */
diff --git a/arch/arm/mach-bcmring/include/mach/timex.h b/arch/arm/mach-bcmring/include/mach/timex.h
new file mode 100644
index 000000000000..40d033ec5892
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/timex.h
@@ -0,0 +1,25 @@
+/*
+ *
+ *  Integrator architecture timex specifications
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+/*
+ * Specifies the number of ticks per second
+ */
+#define CLOCK_TICK_RATE		100000 /* REG_SMT_TICKS_PER_SEC */
diff --git a/arch/arm/mach-bcmring/include/mach/uncompress.h b/arch/arm/mach-bcmring/include/mach/uncompress.h
new file mode 100644
index 000000000000..9c9821b77977
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/uncompress.h
@@ -0,0 +1,43 @@
+/*****************************************************************************
+* Copyright 2005 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+#include <mach/csp/mm_addr.h>
+
+#define BCMRING_UART_0_DR (*(volatile unsigned int *)MM_ADDR_IO_UARTA)
+#define BCMRING_UART_0_FR (*(volatile unsigned int *)(MM_ADDR_IO_UARTA + 0x18))
+/*
+ * This does not append a newline
+ */
+static inline void putc(int c)
+{
+	/* Send out UARTA */
+	while (BCMRING_UART_0_FR & (1 << 5))
+		;
+
+	BCMRING_UART_0_DR = c;
+}
+
+
+static inline void flush(void)
+{
+	/* Wait for the tx fifo to be empty */
+	while ((BCMRING_UART_0_FR & (1 << 7)) == 0)
+		;
+
+	/* Wait for the final character to be sent on the txd line */
+	while (BCMRING_UART_0_FR & (1 << 3))
+		;
+}
+
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-bcmring/include/mach/vmalloc.h b/arch/arm/mach-bcmring/include/mach/vmalloc.h
new file mode 100644
index 000000000000..35e2ead8395c
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/vmalloc.h
@@ -0,0 +1,25 @@
+/*
+ *
+ *  Copyright (C) 2000 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+/*
+ * Move VMALLOC_END to 0xf0000000 so that the vm space can range from
+ * 0xe0000000 to 0xefffffff. This gives us 256 MB of vm space and handles
+ * larger physical memory designs better.
+ */
+#define VMALLOC_END       (PAGE_OFFSET + 0x30000000)
diff --git a/arch/arm/mach-bcmring/irq.c b/arch/arm/mach-bcmring/irq.c
new file mode 100644
index 000000000000..dc1c4939b0ce
--- /dev/null
+++ b/arch/arm/mach-bcmring/irq.c
@@ -0,0 +1,127 @@
+/*
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#include <linux/init.h>
+#include <linux/stddef.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/version.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <asm/irq.h>
+
+#include <asm/mach/irq.h>
+#include <mach/csp/intcHw_reg.h>
+#include <mach/csp/mm_io.h>
+
+static void bcmring_mask_irq0(unsigned int irq)
+{
+	writel(1 << (irq - IRQ_INTC0_START),
+	       MM_IO_BASE_INTC0 + INTCHW_INTENCLEAR);
+}
+
+static void bcmring_unmask_irq0(unsigned int irq)
+{
+	writel(1 << (irq - IRQ_INTC0_START),
+	       MM_IO_BASE_INTC0 + INTCHW_INTENABLE);
+}
+
+static void bcmring_mask_irq1(unsigned int irq)
+{
+	writel(1 << (irq - IRQ_INTC1_START),
+	       MM_IO_BASE_INTC1 + INTCHW_INTENCLEAR);
+}
+
+static void bcmring_unmask_irq1(unsigned int irq)
+{
+	writel(1 << (irq - IRQ_INTC1_START),
+	       MM_IO_BASE_INTC1 + INTCHW_INTENABLE);
+}
+
+static void bcmring_mask_irq2(unsigned int irq)
+{
+	writel(1 << (irq - IRQ_SINTC_START),
+	       MM_IO_BASE_SINTC + INTCHW_INTENCLEAR);
+}
+
+static void bcmring_unmask_irq2(unsigned int irq)
+{
+	writel(1 << (irq - IRQ_SINTC_START),
+	       MM_IO_BASE_SINTC + INTCHW_INTENABLE);
+}
+
+static struct irq_chip bcmring_irq0_chip = {
+	.typename = "ARM-INTC0",
+	.ack = bcmring_mask_irq0,
+	.mask = bcmring_mask_irq0,	/* mask a specific interrupt, blocking its delivery. */
+	.unmask = bcmring_unmask_irq0,	/* unmaks an interrupt */
+};
+
+static struct irq_chip bcmring_irq1_chip = {
+	.typename = "ARM-INTC1",
+	.ack = bcmring_mask_irq1,
+	.mask = bcmring_mask_irq1,
+	.unmask = bcmring_unmask_irq1,
+};
+
+static struct irq_chip bcmring_irq2_chip = {
+	.typename = "ARM-SINTC",
+	.ack = bcmring_mask_irq2,
+	.mask = bcmring_mask_irq2,
+	.unmask = bcmring_unmask_irq2,
+};
+
+static void vic_init(void __iomem *base, struct irq_chip *chip,
+		     unsigned int irq_start, unsigned int vic_sources)
+{
+	unsigned int i;
+	for (i = 0; i < 32; i++) {
+		unsigned int irq = irq_start + i;
+		set_irq_chip(irq, chip);
+		set_irq_chip_data(irq, base);
+
+		if (vic_sources & (1 << i)) {
+			set_irq_handler(irq, handle_level_irq);
+			set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+		}
+	}
+	writel(0, base + INTCHW_INTSELECT);
+	writel(0, base + INTCHW_INTENABLE);
+	writel(~0, base + INTCHW_INTENCLEAR);
+	writel(0, base + INTCHW_IRQSTATUS);
+	writel(~0, base + INTCHW_SOFTINTCLEAR);
+}
+
+void __init bcmring_init_irq(void)
+{
+	vic_init((void __iomem *)MM_IO_BASE_INTC0, &bcmring_irq0_chip,
+		 IRQ_INTC0_START, IRQ_INTC0_VALID_MASK);
+	vic_init((void __iomem *)MM_IO_BASE_INTC1, &bcmring_irq1_chip,
+		 IRQ_INTC1_START, IRQ_INTC1_VALID_MASK);
+	vic_init((void __iomem *)MM_IO_BASE_SINTC, &bcmring_irq2_chip,
+		 IRQ_SINTC_START, IRQ_SINTC_VALID_MASK);
+
+	/* special cases */
+	if (INTCHW_INTC1_GPIO0 & IRQ_INTC1_VALID_MASK) {
+		set_irq_handler(IRQ_GPIO0, handle_simple_irq);
+	}
+	if (INTCHW_INTC1_GPIO1 & IRQ_INTC1_VALID_MASK) {
+		set_irq_handler(IRQ_GPIO1, handle_simple_irq);
+	}
+}
diff --git a/arch/arm/mach-bcmring/mm.c b/arch/arm/mach-bcmring/mm.c
new file mode 100644
index 000000000000..0f1c37e4523a
--- /dev/null
+++ b/arch/arm/mach-bcmring/mm.c
@@ -0,0 +1,56 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#include <linux/platform_device.h>
+#include <asm/mach/map.h>
+
+#include <mach/hardware.h>
+#include <mach/csp/mm_io.h>
+
+#define IO_DESC(va, sz) { .virtual = va, \
+	.pfn = __phys_to_pfn(HW_IO_VIRT_TO_PHYS(va)), \
+	.length = sz, \
+	.type = MT_DEVICE }
+
+#define MEM_DESC(va, sz) { .virtual = va, \
+	.pfn = __phys_to_pfn(HW_IO_VIRT_TO_PHYS(va)), \
+	.length = sz, \
+	.type = MT_MEMORY }
+
+static struct map_desc bcmring_io_desc[] __initdata = {
+	IO_DESC(MM_IO_BASE_NAND, SZ_64K),	/* phys:0x28000000-0x28000FFF  virt:0xE8000000-0xE8000FFF  size:0x00010000 */
+	IO_DESC(MM_IO_BASE_UMI, SZ_64K),	/* phys:0x2C000000-0x2C000FFF  virt:0xEC000000-0xEC000FFF  size:0x00010000 */
+
+	IO_DESC(MM_IO_BASE_BROM, SZ_64K),	/* phys:0x30000000-0x3000FFFF  virt:0xF3000000-0xF300FFFF  size:0x00010000 */
+	MEM_DESC(MM_IO_BASE_ARAM, SZ_1M),	/* phys:0x31000000-0x31FFFFFF  virt:0xF3100000-0xF31FFFFF  size:0x01000000 */
+	IO_DESC(MM_IO_BASE_DMA0, SZ_1M),	/* phys:0x32000000-0x32FFFFFF  virt:0xF3200000-0xF32FFFFF  size:0x01000000 */
+	IO_DESC(MM_IO_BASE_DMA1, SZ_1M),	/* phys:0x33000000-0x33FFFFFF  virt:0xF3300000-0xF33FFFFF  size:0x01000000 */
+	IO_DESC(MM_IO_BASE_ESW, SZ_1M),	/* phys:0x34000000-0x34FFFFFF  virt:0xF3400000-0xF34FFFFF  size:0x01000000 */
+	IO_DESC(MM_IO_BASE_CLCD, SZ_1M),	/* phys:0x35000000-0x35FFFFFF  virt:0xF3500000-0xF35FFFFF  size:0x01000000 */
+	IO_DESC(MM_IO_BASE_APM, SZ_1M),	/* phys:0x36000000-0x36FFFFFF  virt:0xF3600000-0xF36FFFFF  size:0x01000000 */
+	IO_DESC(MM_IO_BASE_SPUM, SZ_1M),	/* phys:0x37000000-0x37FFFFFF  virt:0xF3700000-0xF37FFFFF  size:0x01000000 */
+	IO_DESC(MM_IO_BASE_VPM_PROG, SZ_1M),	/* phys:0x38000000-0x38FFFFFF  virt:0xF3800000-0xF38FFFFF  size:0x01000000 */
+	IO_DESC(MM_IO_BASE_VPM_DATA, SZ_1M),	/* phys:0x3A000000-0x3AFFFFFF  virt:0xF3A00000-0xF3AFFFFF  size:0x01000000 */
+
+	IO_DESC(MM_IO_BASE_VRAM, SZ_64K),	/* phys:0x40000000-0x4000FFFF  virt:0xF4000000-0xF400FFFF  size:0x00010000 */
+	IO_DESC(MM_IO_BASE_CHIPC, SZ_16M),	/* phys:0x80000000-0x80FFFFFF  virt:0xF8000000-0xF8FFFFFF  size:0x01000000 */
+	IO_DESC(MM_IO_BASE_VPM_EXTMEM_RSVD,
+		SZ_16M),	/* phys:0x0F000000-0x0FFFFFFF  virt:0xF0000000-0xF0FFFFFF  size:0x01000000 */
+};
+
+void __init bcmring_map_io(void)
+{
+
+	iotable_init(bcmring_io_desc, ARRAY_SIZE(bcmring_io_desc));
+}
diff --git a/arch/arm/mach-bcmring/timer.c b/arch/arm/mach-bcmring/timer.c
new file mode 100644
index 000000000000..2d415d2a8e68
--- /dev/null
+++ b/arch/arm/mach-bcmring/timer.c
@@ -0,0 +1,62 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#include <linux/version.h>
+#include <linux/types.h>
+#include <linux/module.h>
+#include <csp/tmrHw.h>
+
+#include <mach/timer.h>
+/* The core.c file initializes timers 1 and 3 as a linux clocksource. */
+/* The real time clock should probably be the real linux clocksource. */
+/* In the meantime, this file should agree with core.c as to the */
+/* profiling timer. If the clocksource is moved to rtc later, then */
+/* we can init the profiling timer here instead. */
+
+/* Timer 1 provides 25MHz resolution syncrhonized to scheduling and APM timing */
+/* Timer 3 provides bus freqeuncy sychronized to ACLK, but spread spectrum will */
+/* affect synchronization with scheduling and APM timing. */
+
+#define PROF_TIMER 1
+
+timer_tick_rate_t timer_get_tick_rate(void)
+{
+	return tmrHw_getCountRate(PROF_TIMER);
+}
+
+timer_tick_count_t timer_get_tick_count(void)
+{
+	return tmrHw_GetCurrentCount(PROF_TIMER);	/* change downcounter to upcounter */
+}
+
+timer_msec_t timer_ticks_to_msec(timer_tick_count_t ticks)
+{
+	static int tickRateMsec;
+
+	if (tickRateMsec == 0) {
+		tickRateMsec = timer_get_tick_rate() / 1000;
+	}
+
+	return ticks / tickRateMsec;
+}
+
+timer_msec_t timer_get_msec(void)
+{
+	return timer_ticks_to_msec(timer_get_tick_count());
+}
+
+EXPORT_SYMBOL(timer_get_tick_count);
+EXPORT_SYMBOL(timer_ticks_to_msec);
+EXPORT_SYMBOL(timer_get_tick_rate);
+EXPORT_SYMBOL(timer_get_msec);
diff --git a/arch/arm/mach-ep93xx/adssphere.c b/arch/arm/mach-ep93xx/adssphere.c
index 3fbd9b0fbe24..caf6d5154aec 100644
--- a/arch/arm/mach-ep93xx/adssphere.c
+++ b/arch/arm/mach-ep93xx/adssphere.c
@@ -12,18 +12,15 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
+#include <linux/mtd/physmap.h>
+
 #include <mach/hardware.h>
+
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
+
 static struct physmap_flash_data adssphere_flash_data = {
 	.width		= 4,
 };
diff --git a/arch/arm/mach-ep93xx/clock.c b/arch/arm/mach-ep93xx/clock.c
index 6c4c1633ed12..3dd0e2a23095 100644
--- a/arch/arm/mach-ep93xx/clock.c
+++ b/arch/arm/mach-ep93xx/clock.c
@@ -22,48 +22,39 @@
 #include <mach/hardware.h>
 
 
-/*
- * The EP93xx has two external crystal oscillators.  To generate the
- * required high-frequency clocks, the processor uses two phase-locked-
- * loops (PLLs) to multiply the incoming external clock signal to much
- * higher frequencies that are then divided down by programmable dividers
- * to produce the needed clocks.  The PLLs operate independently of one
- * another.
- */
-#define EP93XX_EXT_CLK_RATE	14745600
-#define EP93XX_EXT_RTC_RATE	32768
-
-
 struct clk {
 	unsigned long	rate;
 	int		users;
 	int		sw_locked;
-	u32		enable_reg;
+	void __iomem	*enable_reg;
 	u32		enable_mask;
 
 	unsigned long	(*get_rate)(struct clk *clk);
+	int		(*set_rate)(struct clk *clk, unsigned long rate);
 };
 
 
 static unsigned long get_uart_rate(struct clk *clk);
 
+static int set_keytchclk_rate(struct clk *clk, unsigned long rate);
+
 
 static struct clk clk_uart1 = {
 	.sw_locked	= 1,
-	.enable_reg	= EP93XX_SYSCON_DEVICE_CONFIG,
-	.enable_mask	= EP93XX_SYSCON_DEVICE_CONFIG_U1EN,
+	.enable_reg	= EP93XX_SYSCON_DEVCFG,
+	.enable_mask	= EP93XX_SYSCON_DEVCFG_U1EN,
 	.get_rate	= get_uart_rate,
 };
 static struct clk clk_uart2 = {
 	.sw_locked	= 1,
-	.enable_reg	= EP93XX_SYSCON_DEVICE_CONFIG,
-	.enable_mask	= EP93XX_SYSCON_DEVICE_CONFIG_U2EN,
+	.enable_reg	= EP93XX_SYSCON_DEVCFG,
+	.enable_mask	= EP93XX_SYSCON_DEVCFG_U2EN,
 	.get_rate	= get_uart_rate,
 };
 static struct clk clk_uart3 = {
 	.sw_locked	= 1,
-	.enable_reg	= EP93XX_SYSCON_DEVICE_CONFIG,
-	.enable_mask	= EP93XX_SYSCON_DEVICE_CONFIG_U3EN,
+	.enable_reg	= EP93XX_SYSCON_DEVCFG,
+	.enable_mask	= EP93XX_SYSCON_DEVCFG_U3EN,
 	.get_rate	= get_uart_rate,
 };
 static struct clk clk_pll1;
@@ -75,6 +66,15 @@ static struct clk clk_usb_host = {
 	.enable_reg	= EP93XX_SYSCON_PWRCNT,
 	.enable_mask	= EP93XX_SYSCON_PWRCNT_USH_EN,
 };
+static struct clk clk_keypad = {
+	.sw_locked	= 1,
+	.enable_reg	= EP93XX_SYSCON_KEYTCHCLKDIV,
+	.enable_mask	= EP93XX_SYSCON_KEYTCHCLKDIV_KEN,
+	.set_rate	= set_keytchclk_rate,
+};
+static struct clk clk_pwm = {
+	.rate		= EP93XX_EXT_CLK_RATE,
+};
 
 /* DMA Clocks */
 static struct clk clk_m2p0 = {
@@ -130,27 +130,29 @@ static struct clk clk_m2m1 = {
 	{ .dev_id = dev, .con_id = con, .clk = ck }
 
 static struct clk_lookup clocks[] = {
-	INIT_CK("apb:uart1", NULL, &clk_uart1),
-	INIT_CK("apb:uart2", NULL, &clk_uart2),
-	INIT_CK("apb:uart3", NULL, &clk_uart3),
-	INIT_CK(NULL, "pll1", &clk_pll1),
-	INIT_CK(NULL, "fclk", &clk_f),
-	INIT_CK(NULL, "hclk", &clk_h),
-	INIT_CK(NULL, "pclk", &clk_p),
-	INIT_CK(NULL, "pll2", &clk_pll2),
-	INIT_CK("ep93xx-ohci", NULL, &clk_usb_host),
-	INIT_CK(NULL, "m2p0", &clk_m2p0),
-	INIT_CK(NULL, "m2p1", &clk_m2p1),
-	INIT_CK(NULL, "m2p2", &clk_m2p2),
-	INIT_CK(NULL, "m2p3", &clk_m2p3),
-	INIT_CK(NULL, "m2p4", &clk_m2p4),
-	INIT_CK(NULL, "m2p5", &clk_m2p5),
-	INIT_CK(NULL, "m2p6", &clk_m2p6),
-	INIT_CK(NULL, "m2p7", &clk_m2p7),
-	INIT_CK(NULL, "m2p8", &clk_m2p8),
-	INIT_CK(NULL, "m2p9", &clk_m2p9),
-	INIT_CK(NULL, "m2m0", &clk_m2m0),
-	INIT_CK(NULL, "m2m1", &clk_m2m1),
+	INIT_CK("apb:uart1",		NULL,		&clk_uart1),
+	INIT_CK("apb:uart2",		NULL,		&clk_uart2),
+	INIT_CK("apb:uart3",		NULL,		&clk_uart3),
+	INIT_CK(NULL,			"pll1",		&clk_pll1),
+	INIT_CK(NULL,			"fclk",		&clk_f),
+	INIT_CK(NULL,			"hclk",		&clk_h),
+	INIT_CK(NULL,			"pclk",		&clk_p),
+	INIT_CK(NULL,			"pll2",		&clk_pll2),
+	INIT_CK("ep93xx-ohci",		NULL,		&clk_usb_host),
+	INIT_CK("ep93xx-keypad",	NULL,		&clk_keypad),
+	INIT_CK(NULL,			"pwm_clk",	&clk_pwm),
+	INIT_CK(NULL,			"m2p0",		&clk_m2p0),
+	INIT_CK(NULL,			"m2p1",		&clk_m2p1),
+	INIT_CK(NULL,			"m2p2",		&clk_m2p2),
+	INIT_CK(NULL,			"m2p3",		&clk_m2p3),
+	INIT_CK(NULL,			"m2p4",		&clk_m2p4),
+	INIT_CK(NULL,			"m2p5",		&clk_m2p5),
+	INIT_CK(NULL,			"m2p6",		&clk_m2p6),
+	INIT_CK(NULL,			"m2p7",		&clk_m2p7),
+	INIT_CK(NULL,			"m2p8",		&clk_m2p8),
+	INIT_CK(NULL,			"m2p9",		&clk_m2p9),
+	INIT_CK(NULL,			"m2m0",		&clk_m2m0),
+	INIT_CK(NULL,			"m2m1",		&clk_m2m1),
 };
 
 
@@ -160,9 +162,11 @@ int clk_enable(struct clk *clk)
 		u32 value;
 
 		value = __raw_readl(clk->enable_reg);
+		value |= clk->enable_mask;
 		if (clk->sw_locked)
-			__raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
-		__raw_writel(value | clk->enable_mask, clk->enable_reg);
+			ep93xx_syscon_swlocked_write(value, clk->enable_reg);
+		else
+			__raw_writel(value, clk->enable_reg);
 	}
 
 	return 0;
@@ -175,9 +179,11 @@ void clk_disable(struct clk *clk)
 		u32 value;
 
 		value = __raw_readl(clk->enable_reg);
+		value &= ~clk->enable_mask;
 		if (clk->sw_locked)
-			__raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
-		__raw_writel(value & ~clk->enable_mask, clk->enable_reg);
+			ep93xx_syscon_swlocked_write(value, clk->enable_reg);
+		else
+			__raw_writel(value, clk->enable_reg);
 	}
 }
 EXPORT_SYMBOL(clk_disable);
@@ -202,6 +208,43 @@ unsigned long clk_get_rate(struct clk *clk)
 }
 EXPORT_SYMBOL(clk_get_rate);
 
+static int set_keytchclk_rate(struct clk *clk, unsigned long rate)
+{
+	u32 val;
+	u32 div_bit;
+
+	val = __raw_readl(clk->enable_reg);
+
+	/*
+	 * The Key Matrix and ADC clocks are configured using the same
+	 * System Controller register.  The clock used will be either
+	 * 1/4 or 1/16 the external clock rate depending on the
+	 * EP93XX_SYSCON_KEYTCHCLKDIV_KDIV/EP93XX_SYSCON_KEYTCHCLKDIV_ADIV
+	 * bit being set or cleared.
+	 */
+	div_bit = clk->enable_mask >> 15;
+
+	if (rate == EP93XX_KEYTCHCLK_DIV4)
+		val |= div_bit;
+	else if (rate == EP93XX_KEYTCHCLK_DIV16)
+		val &= ~div_bit;
+	else
+		return -EINVAL;
+
+	ep93xx_syscon_swlocked_write(val, clk->enable_reg);
+	clk->rate = rate;
+	return 0;
+}
+
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+	if (clk->set_rate)
+		return clk->set_rate(clk, rate);
+
+	return -EINVAL;
+}
+EXPORT_SYMBOL(clk_set_rate);
+
 
 static char fclk_divisors[] = { 1, 2, 4, 8, 16, 1, 1, 1 };
 static char hclk_divisors[] = { 1, 2, 4, 5, 6, 8, 16, 32 };
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index 204dc5cbd0b8..16b92c37ec99 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -16,40 +16,24 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/spinlock.h>
-#include <linux/sched.h>
+#include <linux/platform_device.h>
 #include <linux/interrupt.h>
-#include <linux/serial.h>
-#include <linux/tty.h>
-#include <linux/bitops.h>
-#include <linux/serial_8250.h>
-#include <linux/serial_core.h>
-#include <linux/device.h>
-#include <linux/mm.h>
 #include <linux/dma-mapping.h>
-#include <linux/time.h>
 #include <linux/timex.h>
-#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
 #include <linux/termios.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/serial.h>
-#include <linux/io.h>
 #include <linux/i2c.h>
 #include <linux/i2c-gpio.h>
 
-#include <asm/types.h>
-#include <asm/setup.h>
-#include <asm/memory.h>
 #include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/system.h>
-#include <asm/tlbflush.h>
-#include <asm/pgtable.h>
 
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
 #include <asm/mach/irq.h>
-#include <mach/gpio.h>
 
 #include <asm/hardware/vic.h>
 
@@ -98,7 +82,7 @@ void __init ep93xx_map_io(void)
  */
 static unsigned int last_jiffy_time;
 
-#define TIMER4_TICKS_PER_JIFFY		((CLOCK_TICK_RATE + (HZ/2)) / HZ)
+#define TIMER4_TICKS_PER_JIFFY		DIV_ROUND_CLOSEST(CLOCK_TICK_RATE, HZ)
 
 static irqreturn_t ep93xx_timer_interrupt(int irq, void *dev_id)
 {
@@ -362,8 +346,8 @@ void __init ep93xx_init_irq(void)
 {
 	int gpio_irq;
 
-	vic_init((void *)EP93XX_VIC1_BASE, 0, EP93XX_VIC1_VALID_IRQ_MASK, 0);
-	vic_init((void *)EP93XX_VIC2_BASE, 32, EP93XX_VIC2_VALID_IRQ_MASK, 0);
+	vic_init(EP93XX_VIC1_BASE, 0, EP93XX_VIC1_VALID_IRQ_MASK, 0);
+	vic_init(EP93XX_VIC2_BASE, 32, EP93XX_VIC2_VALID_IRQ_MASK, 0);
 
 	for (gpio_irq = gpio_to_irq(0);
 	     gpio_irq <= gpio_to_irq(EP93XX_GPIO_LINE_MAX_IRQ); ++gpio_irq) {
@@ -385,6 +369,47 @@ void __init ep93xx_init_irq(void)
 
 
 /*************************************************************************
+ * EP93xx System Controller Software Locked register handling
+ *************************************************************************/
+
+/*
+ * syscon_swlock prevents anything else from writing to the syscon
+ * block while a software locked register is being written.
+ */
+static DEFINE_SPINLOCK(syscon_swlock);
+
+void ep93xx_syscon_swlocked_write(unsigned int val, void __iomem *reg)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&syscon_swlock, flags);
+
+	__raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
+	__raw_writel(val, reg);
+
+	spin_unlock_irqrestore(&syscon_swlock, flags);
+}
+EXPORT_SYMBOL(ep93xx_syscon_swlocked_write);
+
+void ep93xx_devcfg_set_clear(unsigned int set_bits, unsigned int clear_bits)
+{
+	unsigned long flags;
+	unsigned int val;
+
+	spin_lock_irqsave(&syscon_swlock, flags);
+
+	val = __raw_readl(EP93XX_SYSCON_DEVCFG);
+	val |= set_bits;
+	val &= ~clear_bits;
+	__raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
+	__raw_writel(val, EP93XX_SYSCON_DEVCFG);
+
+	spin_unlock_irqrestore(&syscon_swlock, flags);
+}
+EXPORT_SYMBOL(ep93xx_devcfg_set_clear);
+
+
+/*************************************************************************
  * EP93xx peripheral handling
  *************************************************************************/
 #define EP93XX_UART_MCR_OFFSET		(0x0100)
@@ -517,10 +542,8 @@ static struct platform_device ep93xx_eth_device = {
 
 void __init ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr)
 {
-	if (copy_addr) {
-		memcpy(data->dev_addr,
-			(void *)(EP93XX_ETHERNET_BASE + 0x50), 6);
-	}
+	if (copy_addr)
+		memcpy_fromio(data->dev_addr, EP93XX_ETHERNET_BASE + 0x50, 6);
 
 	ep93xx_eth_data = *data;
 	platform_device_register(&ep93xx_eth_device);
@@ -546,19 +569,125 @@ void __init ep93xx_register_i2c(struct i2c_board_info *devices, int num)
 	platform_device_register(&ep93xx_i2c_device);
 }
 
+
+/*************************************************************************
+ * EP93xx LEDs
+ *************************************************************************/
+static struct gpio_led ep93xx_led_pins[] = {
+	{
+		.name			= "platform:grled",
+		.gpio			= EP93XX_GPIO_LINE_GRLED,
+	}, {
+		.name			= "platform:rdled",
+		.gpio			= EP93XX_GPIO_LINE_RDLED,
+	},
+};
+
+static struct gpio_led_platform_data ep93xx_led_data = {
+	.num_leds	= ARRAY_SIZE(ep93xx_led_pins),
+	.leds		= ep93xx_led_pins,
+};
+
+static struct platform_device ep93xx_leds = {
+	.name		= "leds-gpio",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &ep93xx_led_data,
+	},
+};
+
+
+/*************************************************************************
+ * EP93xx pwm peripheral handling
+ *************************************************************************/
+static struct resource ep93xx_pwm0_resource[] = {
+	{
+		.start	= EP93XX_PWM_PHYS_BASE,
+		.end	= EP93XX_PWM_PHYS_BASE + 0x10 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device ep93xx_pwm0_device = {
+	.name		= "ep93xx-pwm",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(ep93xx_pwm0_resource),
+	.resource	= ep93xx_pwm0_resource,
+};
+
+static struct resource ep93xx_pwm1_resource[] = {
+	{
+		.start	= EP93XX_PWM_PHYS_BASE + 0x20,
+		.end	= EP93XX_PWM_PHYS_BASE + 0x30 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device ep93xx_pwm1_device = {
+	.name		= "ep93xx-pwm",
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(ep93xx_pwm1_resource),
+	.resource	= ep93xx_pwm1_resource,
+};
+
+void __init ep93xx_register_pwm(int pwm0, int pwm1)
+{
+	if (pwm0)
+		platform_device_register(&ep93xx_pwm0_device);
+
+	/* NOTE: EP9307 does not have PWMOUT1 (pin EGPIO14) */
+	if (pwm1)
+		platform_device_register(&ep93xx_pwm1_device);
+}
+
+int ep93xx_pwm_acquire_gpio(struct platform_device *pdev)
+{
+	int err;
+
+	if (pdev->id == 0) {
+		err = 0;
+	} else if (pdev->id == 1) {
+		err = gpio_request(EP93XX_GPIO_LINE_EGPIO14,
+				   dev_name(&pdev->dev));
+		if (err)
+			return err;
+		err = gpio_direction_output(EP93XX_GPIO_LINE_EGPIO14, 0);
+		if (err)
+			goto fail;
+
+		/* PWM 1 output on EGPIO[14] */
+		ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_PONG);
+	} else {
+		err = -ENODEV;
+	}
+
+	return err;
+
+fail:
+	gpio_free(EP93XX_GPIO_LINE_EGPIO14);
+	return err;
+}
+EXPORT_SYMBOL(ep93xx_pwm_acquire_gpio);
+
+void ep93xx_pwm_release_gpio(struct platform_device *pdev)
+{
+	if (pdev->id == 1) {
+		gpio_direction_input(EP93XX_GPIO_LINE_EGPIO14);
+		gpio_free(EP93XX_GPIO_LINE_EGPIO14);
+
+		/* EGPIO[14] used for GPIO */
+		ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_PONG);
+	}
+}
+EXPORT_SYMBOL(ep93xx_pwm_release_gpio);
+
+
 extern void ep93xx_gpio_init(void);
 
 void __init ep93xx_init_devices(void)
 {
-	unsigned int v;
-
-	/*
-	 * Disallow access to MaverickCrunch initially.
-	 */
-	v = __raw_readl(EP93XX_SYSCON_DEVICE_CONFIG);
-	v &= ~EP93XX_SYSCON_DEVICE_CONFIG_CRUNCH_ENABLE;
-	__raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
-	__raw_writel(v, EP93XX_SYSCON_DEVICE_CONFIG);
+	/* Disallow access to MaverickCrunch initially */
+	ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_CPENA);
 
 	ep93xx_gpio_init();
 
@@ -568,4 +697,5 @@ void __init ep93xx_init_devices(void)
 
 	platform_device_register(&ep93xx_rtc_device);
 	platform_device_register(&ep93xx_ohci_device);
+	platform_device_register(&ep93xx_leds);
 }
diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c
index e9e45b92457e..73145ae5d3fa 100644
--- a/arch/arm/mach-ep93xx/edb93xx.c
+++ b/arch/arm/mach-ep93xx/edb93xx.c
@@ -26,18 +26,16 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
-#include <linux/io.h>
 #include <linux/i2c.h>
+#include <linux/mtd/physmap.h>
+
 #include <mach/hardware.h>
+
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
+
 static struct physmap_flash_data edb93xx_flash_data;
 
 static struct resource edb93xx_flash_resource = {
diff --git a/arch/arm/mach-ep93xx/gesbc9312.c b/arch/arm/mach-ep93xx/gesbc9312.c
index 3bad500b71b6..3da7ca816d19 100644
--- a/arch/arm/mach-ep93xx/gesbc9312.c
+++ b/arch/arm/mach-ep93xx/gesbc9312.c
@@ -12,18 +12,15 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
+#include <linux/mtd/physmap.h>
+
 #include <mach/hardware.h>
+
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
+
 static struct physmap_flash_data gesbc9312_flash_data = {
 	.width		= 4,
 };
diff --git a/arch/arm/mach-ep93xx/gpio.c b/arch/arm/mach-ep93xx/gpio.c
index 482cf3d2fbcd..1ea8871e03a9 100644
--- a/arch/arm/mach-ep93xx/gpio.c
+++ b/arch/arm/mach-ep93xx/gpio.c
@@ -17,15 +17,16 @@
 #include <linux/module.h>
 #include <linux/seq_file.h>
 #include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/irq.h>
 
-#include <mach/ep93xx-regs.h>
-#include <asm/gpio.h>
+#include <mach/hardware.h>
 
 struct ep93xx_gpio_chip {
 	struct gpio_chip	chip;
 
-	unsigned int		data_reg;
-	unsigned int		data_dir_reg;
+	void __iomem		*data_reg;
+	void __iomem		*data_dir_reg;
 };
 
 #define to_ep93xx_gpio_chip(c) container_of(c, struct ep93xx_gpio_chip, chip)
@@ -111,15 +112,61 @@ static void ep93xx_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip)
 {
 	struct ep93xx_gpio_chip *ep93xx_chip = to_ep93xx_gpio_chip(chip);
 	u8 data_reg, data_dir_reg;
-	int i;
+	int gpio, i;
 
 	data_reg = __raw_readb(ep93xx_chip->data_reg);
 	data_dir_reg = __raw_readb(ep93xx_chip->data_dir_reg);
 
-	for (i = 0; i < chip->ngpio; i++)
-		seq_printf(s, "GPIO %s%d: %s %s\n", chip->label, i,
-			   (data_reg & (1 << i)) ? "set" : "clear",
-			   (data_dir_reg & (1 << i)) ? "out" : "in");
+	gpio = ep93xx_chip->chip.base;
+	for (i = 0; i < chip->ngpio; i++, gpio++) {
+		int is_out = data_dir_reg & (1 << i);
+
+		seq_printf(s, " %s%d gpio-%-3d (%-12s) %s %s",
+				chip->label, i, gpio,
+				gpiochip_is_requested(chip, i) ? : "",
+				is_out ? "out" : "in ",
+				(data_reg & (1 << i)) ? "hi" : "lo");
+
+		if (!is_out) {
+			int irq = gpio_to_irq(gpio);
+			struct irq_desc *desc = irq_desc + irq;
+
+			if (irq >= 0 && desc->action) {
+				char *trigger;
+
+				switch (desc->status & IRQ_TYPE_SENSE_MASK) {
+				case IRQ_TYPE_NONE:
+					trigger = "(default)";
+					break;
+				case IRQ_TYPE_EDGE_FALLING:
+					trigger = "edge-falling";
+					break;
+				case IRQ_TYPE_EDGE_RISING:
+					trigger = "edge-rising";
+					break;
+				case IRQ_TYPE_EDGE_BOTH:
+					trigger = "edge-both";
+					break;
+				case IRQ_TYPE_LEVEL_HIGH:
+					trigger = "level-high";
+					break;
+				case IRQ_TYPE_LEVEL_LOW:
+					trigger = "level-low";
+					break;
+				default:
+					trigger = "?trigger?";
+					break;
+				}
+
+				seq_printf(s, " irq-%d %s%s",
+						irq, trigger,
+						(desc->status & IRQ_WAKEUP)
+							? " wakeup" : "");
+			}
+		}
+
+		seq_printf(s, "\n");
+	}
 }
 
 #define EP93XX_GPIO_BANK(name, dr, ddr, base_gpio)			\
diff --git a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
index 967c079180db..ea78e908fc82 100644
--- a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
+++ b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
@@ -52,40 +52,43 @@
 #define EP93XX_AHB_VIRT_BASE		0xfef00000
 #define EP93XX_AHB_SIZE			0x00100000
 
+#define EP93XX_AHB_IOMEM(x)		IOMEM(EP93XX_AHB_VIRT_BASE + (x))
+
 #define EP93XX_APB_PHYS_BASE		0x80800000
 #define EP93XX_APB_VIRT_BASE		0xfed00000
 #define EP93XX_APB_SIZE			0x00200000
 
+#define EP93XX_APB_IOMEM(x)		IOMEM(EP93XX_APB_VIRT_BASE + (x))
+
 
 /* AHB peripherals */
-#define EP93XX_DMA_BASE			((void __iomem *)		\
-					 (EP93XX_AHB_VIRT_BASE + 0x00000000))
+#define EP93XX_DMA_BASE			EP93XX_AHB_IOMEM(0x00000000)
 
-#define EP93XX_ETHERNET_BASE		(EP93XX_AHB_VIRT_BASE + 0x00010000)
 #define EP93XX_ETHERNET_PHYS_BASE	(EP93XX_AHB_PHYS_BASE + 0x00010000)
+#define EP93XX_ETHERNET_BASE		EP93XX_AHB_IOMEM(0x00010000)
 
-#define EP93XX_USB_BASE			(EP93XX_AHB_VIRT_BASE + 0x00020000)
 #define EP93XX_USB_PHYS_BASE		(EP93XX_AHB_PHYS_BASE + 0x00020000)
+#define EP93XX_USB_BASE			EP93XX_AHB_IOMEM(0x00020000)
 
-#define EP93XX_RASTER_BASE		(EP93XX_AHB_VIRT_BASE + 0x00030000)
+#define EP93XX_RASTER_BASE		EP93XX_AHB_IOMEM(0x00030000)
 
-#define EP93XX_GRAPHICS_ACCEL_BASE	(EP93XX_AHB_VIRT_BASE + 0x00040000)
+#define EP93XX_GRAPHICS_ACCEL_BASE	EP93XX_AHB_IOMEM(0x00040000)
 
-#define EP93XX_SDRAM_CONTROLLER_BASE	(EP93XX_AHB_VIRT_BASE + 0x00060000)
+#define EP93XX_SDRAM_CONTROLLER_BASE	EP93XX_AHB_IOMEM(0x00060000)
 
-#define EP93XX_PCMCIA_CONTROLLER_BASE	(EP93XX_AHB_VIRT_BASE + 0x00080000)
+#define EP93XX_PCMCIA_CONTROLLER_BASE	EP93XX_AHB_IOMEM(0x00080000)
 
-#define EP93XX_BOOT_ROM_BASE		(EP93XX_AHB_VIRT_BASE + 0x00090000)
+#define EP93XX_BOOT_ROM_BASE		EP93XX_AHB_IOMEM(0x00090000)
 
-#define EP93XX_IDE_BASE			(EP93XX_AHB_VIRT_BASE + 0x000a0000)
+#define EP93XX_IDE_BASE			EP93XX_AHB_IOMEM(0x000a0000)
 
-#define EP93XX_VIC1_BASE		(EP93XX_AHB_VIRT_BASE + 0x000b0000)
+#define EP93XX_VIC1_BASE		EP93XX_AHB_IOMEM(0x000b0000)
 
-#define EP93XX_VIC2_BASE		(EP93XX_AHB_VIRT_BASE + 0x000c0000)
+#define EP93XX_VIC2_BASE		EP93XX_AHB_IOMEM(0x000c0000)
 
 
 /* APB peripherals */
-#define EP93XX_TIMER_BASE		(EP93XX_APB_VIRT_BASE + 0x00010000)
+#define EP93XX_TIMER_BASE		EP93XX_APB_IOMEM(0x00010000)
 #define EP93XX_TIMER_REG(x)		(EP93XX_TIMER_BASE + (x))
 #define EP93XX_TIMER1_LOAD		EP93XX_TIMER_REG(0x00)
 #define EP93XX_TIMER1_VALUE		EP93XX_TIMER_REG(0x04)
@@ -102,11 +105,11 @@
 #define EP93XX_TIMER3_CONTROL		EP93XX_TIMER_REG(0x88)
 #define EP93XX_TIMER3_CLEAR		EP93XX_TIMER_REG(0x8c)
 
-#define EP93XX_I2S_BASE			(EP93XX_APB_VIRT_BASE + 0x00020000)
+#define EP93XX_I2S_BASE			EP93XX_APB_IOMEM(0x00020000)
 
-#define EP93XX_SECURITY_BASE		(EP93XX_APB_VIRT_BASE + 0x00030000)
+#define EP93XX_SECURITY_BASE		EP93XX_APB_IOMEM(0x00030000)
 
-#define EP93XX_GPIO_BASE		(EP93XX_APB_VIRT_BASE + 0x00040000)
+#define EP93XX_GPIO_BASE		EP93XX_APB_IOMEM(0x00040000)
 #define EP93XX_GPIO_REG(x)		(EP93XX_GPIO_BASE + (x))
 #define EP93XX_GPIO_F_INT_TYPE1		EP93XX_GPIO_REG(0x4c)
 #define EP93XX_GPIO_F_INT_TYPE2		EP93XX_GPIO_REG(0x50)
@@ -124,32 +127,33 @@
 #define EP93XX_GPIO_B_INT_ENABLE	EP93XX_GPIO_REG(0xb8)
 #define EP93XX_GPIO_B_INT_STATUS	EP93XX_GPIO_REG(0xbc)
 
-#define EP93XX_AAC_BASE			(EP93XX_APB_VIRT_BASE + 0x00080000)
+#define EP93XX_AAC_BASE			EP93XX_APB_IOMEM(0x00080000)
 
-#define EP93XX_SPI_BASE			(EP93XX_APB_VIRT_BASE + 0x000a0000)
+#define EP93XX_SPI_BASE			EP93XX_APB_IOMEM(0x000a0000)
 
-#define EP93XX_IRDA_BASE		(EP93XX_APB_VIRT_BASE + 0x000b0000)
+#define EP93XX_IRDA_BASE		EP93XX_APB_IOMEM(0x000b0000)
 
-#define EP93XX_UART1_BASE		(EP93XX_APB_VIRT_BASE + 0x000c0000)
 #define EP93XX_UART1_PHYS_BASE		(EP93XX_APB_PHYS_BASE + 0x000c0000)
+#define EP93XX_UART1_BASE		EP93XX_APB_IOMEM(0x000c0000)
 
-#define EP93XX_UART2_BASE		(EP93XX_APB_VIRT_BASE + 0x000d0000)
 #define EP93XX_UART2_PHYS_BASE		(EP93XX_APB_PHYS_BASE + 0x000d0000)
+#define EP93XX_UART2_BASE		EP93XX_APB_IOMEM(0x000d0000)
 
-#define EP93XX_UART3_BASE		(EP93XX_APB_VIRT_BASE + 0x000e0000)
 #define EP93XX_UART3_PHYS_BASE		(EP93XX_APB_PHYS_BASE + 0x000e0000)
+#define EP93XX_UART3_BASE		EP93XX_APB_IOMEM(0x000e0000)
 
-#define EP93XX_KEY_MATRIX_BASE		(EP93XX_APB_VIRT_BASE + 0x000f0000)
+#define EP93XX_KEY_MATRIX_BASE		EP93XX_APB_IOMEM(0x000f0000)
 
-#define EP93XX_ADC_BASE			(EP93XX_APB_VIRT_BASE + 0x00100000)
-#define EP93XX_TOUCHSCREEN_BASE		(EP93XX_APB_VIRT_BASE + 0x00100000)
+#define EP93XX_ADC_BASE			EP93XX_APB_IOMEM(0x00100000)
+#define EP93XX_TOUCHSCREEN_BASE		EP93XX_APB_IOMEM(0x00100000)
 
-#define EP93XX_PWM_BASE			(EP93XX_APB_VIRT_BASE + 0x00110000)
+#define EP93XX_PWM_PHYS_BASE		(EP93XX_APB_PHYS_BASE + 0x00110000)
+#define EP93XX_PWM_BASE			EP93XX_APB_IOMEM(0x00110000)
 
-#define EP93XX_RTC_BASE			(EP93XX_APB_VIRT_BASE + 0x00120000)
 #define EP93XX_RTC_PHYS_BASE		(EP93XX_APB_PHYS_BASE + 0x00120000)
+#define EP93XX_RTC_BASE			EP93XX_APB_IOMEM(0x00120000)
 
-#define EP93XX_SYSCON_BASE		(EP93XX_APB_VIRT_BASE + 0x00130000)
+#define EP93XX_SYSCON_BASE		EP93XX_APB_IOMEM(0x00130000)
 #define EP93XX_SYSCON_REG(x)		(EP93XX_SYSCON_BASE + (x))
 #define EP93XX_SYSCON_POWER_STATE	EP93XX_SYSCON_REG(0x00)
 #define EP93XX_SYSCON_PWRCNT		EP93XX_SYSCON_REG(0x04)
@@ -172,14 +176,45 @@
 #define EP93XX_SYSCON_STANDBY		EP93XX_SYSCON_REG(0x0c)
 #define EP93XX_SYSCON_CLOCK_SET1	EP93XX_SYSCON_REG(0x20)
 #define EP93XX_SYSCON_CLOCK_SET2	EP93XX_SYSCON_REG(0x24)
-#define EP93XX_SYSCON_DEVICE_CONFIG	EP93XX_SYSCON_REG(0x80)
-#define EP93XX_SYSCON_DEVICE_CONFIG_U3EN		(1<<24)
-#define EP93XX_SYSCON_DEVICE_CONFIG_CRUNCH_ENABLE	(1<<23)
-#define EP93XX_SYSCON_DEVICE_CONFIG_U2EN		(1<<20)
-#define EP93XX_SYSCON_DEVICE_CONFIG_U1EN		(1<<18)
+#define EP93XX_SYSCON_DEVCFG		EP93XX_SYSCON_REG(0x80)
+#define EP93XX_SYSCON_DEVCFG_SWRST	(1<<31)
+#define EP93XX_SYSCON_DEVCFG_D1ONG	(1<<30)
+#define EP93XX_SYSCON_DEVCFG_D0ONG	(1<<29)
+#define EP93XX_SYSCON_DEVCFG_IONU2	(1<<28)
+#define EP93XX_SYSCON_DEVCFG_GONK	(1<<27)
+#define EP93XX_SYSCON_DEVCFG_TONG	(1<<26)
+#define EP93XX_SYSCON_DEVCFG_MONG	(1<<25)
+#define EP93XX_SYSCON_DEVCFG_U3EN	(1<<24)
+#define EP93XX_SYSCON_DEVCFG_CPENA	(1<<23)
+#define EP93XX_SYSCON_DEVCFG_A2ONG	(1<<22)
+#define EP93XX_SYSCON_DEVCFG_A1ONG	(1<<21)
+#define EP93XX_SYSCON_DEVCFG_U2EN	(1<<20)
+#define EP93XX_SYSCON_DEVCFG_EXVC	(1<<19)
+#define EP93XX_SYSCON_DEVCFG_U1EN	(1<<18)
+#define EP93XX_SYSCON_DEVCFG_TIN	(1<<17)
+#define EP93XX_SYSCON_DEVCFG_HC3IN	(1<<15)
+#define EP93XX_SYSCON_DEVCFG_HC3EN	(1<<14)
+#define EP93XX_SYSCON_DEVCFG_HC1IN	(1<<13)
+#define EP93XX_SYSCON_DEVCFG_HC1EN	(1<<12)
+#define EP93XX_SYSCON_DEVCFG_HONIDE	(1<<11)
+#define EP93XX_SYSCON_DEVCFG_GONIDE	(1<<10)
+#define EP93XX_SYSCON_DEVCFG_PONG	(1<<9)
+#define EP93XX_SYSCON_DEVCFG_EONIDE	(1<<8)
+#define EP93XX_SYSCON_DEVCFG_I2SONSSP	(1<<7)
+#define EP93XX_SYSCON_DEVCFG_I2SONAC97	(1<<6)
+#define EP93XX_SYSCON_DEVCFG_RASONP3	(1<<4)
+#define EP93XX_SYSCON_DEVCFG_RAS	(1<<3)
+#define EP93XX_SYSCON_DEVCFG_ADCPD	(1<<2)
+#define EP93XX_SYSCON_DEVCFG_KEYS	(1<<1)
+#define EP93XX_SYSCON_DEVCFG_SHENA	(1<<0)
+#define EP93XX_SYSCON_KEYTCHCLKDIV	EP93XX_SYSCON_REG(0x90)
+#define EP93XX_SYSCON_KEYTCHCLKDIV_TSEN	(1<<31)
+#define EP93XX_SYSCON_KEYTCHCLKDIV_ADIV	(1<<16)
+#define EP93XX_SYSCON_KEYTCHCLKDIV_KEN	(1<<15)
+#define EP93XX_SYSCON_KEYTCHCLKDIV_KDIV	(1<<0)
 #define EP93XX_SYSCON_SWLOCK		EP93XX_SYSCON_REG(0xc0)
 
-#define EP93XX_WATCHDOG_BASE		(EP93XX_APB_VIRT_BASE + 0x00140000)
+#define EP93XX_WATCHDOG_BASE		EP93XX_APB_IOMEM(0x00140000)
 
 
 #endif
diff --git a/arch/arm/mach-ep93xx/include/mach/hardware.h b/arch/arm/mach-ep93xx/include/mach/hardware.h
index 2866297310b7..349fa7cb72d5 100644
--- a/arch/arm/mach-ep93xx/include/mach/hardware.h
+++ b/arch/arm/mach-ep93xx/include/mach/hardware.h
@@ -4,12 +4,23 @@
 #ifndef __ASM_ARCH_HARDWARE_H
 #define __ASM_ARCH_HARDWARE_H
 
-#include "ep93xx-regs.h"
+#include <mach/ep93xx-regs.h>
+#include <mach/platform.h>
 
 #define pcibios_assign_all_busses()	0
 
-#include "platform.h"
+/*
+ * The EP93xx has two external crystal oscillators.  To generate the
+ * required high-frequency clocks, the processor uses two phase-locked-
+ * loops (PLLs) to multiply the incoming external clock signal to much
+ * higher frequencies that are then divided down by programmable dividers
+ * to produce the needed clocks.  The PLLs operate independently of one
+ * another.
+ */
+#define EP93XX_EXT_CLK_RATE	14745600
+#define EP93XX_EXT_RTC_RATE	32768
 
-#include "ts72xx.h"
+#define EP93XX_KEYTCHCLK_DIV4	(EP93XX_EXT_CLK_RATE / 4)
+#define EP93XX_KEYTCHCLK_DIV16	(EP93XX_EXT_CLK_RATE / 16)
 
 #endif
diff --git a/arch/arm/mach-ep93xx/include/mach/io.h b/arch/arm/mach-ep93xx/include/mach/io.h
index fd5f081cc8b7..cebcc1c53d63 100644
--- a/arch/arm/mach-ep93xx/include/mach/io.h
+++ b/arch/arm/mach-ep93xx/include/mach/io.h
@@ -1,8 +1,21 @@
 /*
  * arch/arm/mach-ep93xx/include/mach/io.h
  */
+#ifndef __ASM_MACH_IO_H
+#define __ASM_MACH_IO_H
 
 #define IO_SPACE_LIMIT		0xffffffff
 
-#define __io(p)		__typesafe_io(p)
-#define __mem_pci(p)	(p)
+#define __io(p)			__typesafe_io(p)
+#define __mem_pci(p)		(p)
+
+/*
+ * A typesafe __io() variation for variable initialisers
+ */
+#ifdef __ASSEMBLER__
+#define IOMEM(p)		p
+#else
+#define IOMEM(p)		((void __iomem __force *)(p))
+#endif
+
+#endif /* __ASM_MACH_IO_H */
diff --git a/arch/arm/mach-ep93xx/include/mach/platform.h b/arch/arm/mach-ep93xx/include/mach/platform.h
index 05f0f4f2f3ce..5f5fa6574d34 100644
--- a/arch/arm/mach-ep93xx/include/mach/platform.h
+++ b/arch/arm/mach-ep93xx/include/mach/platform.h
@@ -5,6 +5,7 @@
 #ifndef __ASSEMBLY__
 
 struct i2c_board_info;
+struct platform_device;
 
 struct ep93xx_eth_data
 {
@@ -15,8 +16,27 @@ struct ep93xx_eth_data
 void ep93xx_map_io(void);
 void ep93xx_init_irq(void);
 void ep93xx_init_time(unsigned long);
+
+/* EP93xx System Controller software locked register write */
+void ep93xx_syscon_swlocked_write(unsigned int val, void __iomem *reg);
+void ep93xx_devcfg_set_clear(unsigned int set_bits, unsigned int clear_bits);
+
+static inline void ep93xx_devcfg_set_bits(unsigned int bits)
+{
+	ep93xx_devcfg_set_clear(bits, 0x00);
+}
+
+static inline void ep93xx_devcfg_clear_bits(unsigned int bits)
+{
+	ep93xx_devcfg_set_clear(0x00, bits);
+}
+
 void ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr);
 void ep93xx_register_i2c(struct i2c_board_info *devices, int num);
+void ep93xx_register_pwm(int pwm0, int pwm1);
+int ep93xx_pwm_acquire_gpio(struct platform_device *pdev);
+void ep93xx_pwm_release_gpio(struct platform_device *pdev);
+
 void ep93xx_init_devices(void);
 extern struct sys_timer ep93xx_timer;
 
diff --git a/arch/arm/mach-ep93xx/include/mach/system.h b/arch/arm/mach-ep93xx/include/mach/system.h
index ed8f35e4f068..6d661fe9d66c 100644
--- a/arch/arm/mach-ep93xx/include/mach/system.h
+++ b/arch/arm/mach-ep93xx/include/mach/system.h
@@ -11,15 +11,13 @@ static inline void arch_idle(void)
 
 static inline void arch_reset(char mode, const char *cmd)
 {
-	u32 devicecfg;
-
 	local_irq_disable();
 
-	devicecfg = __raw_readl(EP93XX_SYSCON_DEVICE_CONFIG);
-	__raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
-	__raw_writel(devicecfg | 0x80000000, EP93XX_SYSCON_DEVICE_CONFIG);
-	__raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
-	__raw_writel(devicecfg & ~0x80000000, EP93XX_SYSCON_DEVICE_CONFIG);
+	/*
+	 * Set then clear the SWRST bit to initiate a software reset
+	 */
+	ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_SWRST);
+	ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_SWRST);
 
 	while (1)
 		;
diff --git a/arch/arm/mach-ep93xx/include/mach/ts72xx.h b/arch/arm/mach-ep93xx/include/mach/ts72xx.h
index 34ddec081c40..2737666e800e 100644
--- a/arch/arm/mach-ep93xx/include/mach/ts72xx.h
+++ b/arch/arm/mach-ep93xx/include/mach/ts72xx.h
@@ -70,7 +70,6 @@
 
 
 #ifndef __ASSEMBLY__
-#include <linux/io.h>
 
 static inline int board_is_ts7200(void)
 {
diff --git a/arch/arm/mach-ep93xx/micro9.c b/arch/arm/mach-ep93xx/micro9.c
index 15d6815d78c4..0a313e82fb74 100644
--- a/arch/arm/mach-ep93xx/micro9.c
+++ b/arch/arm/mach-ep93xx/micro9.c
@@ -9,21 +9,16 @@
  * published by the Free Software Foundation.
  */
 
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
 #include <linux/kernel.h>
-#include <linux/mm.h>
+#include <linux/init.h>
 #include <linux/platform_device.h>
-#include <linux/sched.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
 #include <linux/mtd/physmap.h>
 
 #include <mach/hardware.h>
 
-#include <asm/mach/arch.h>
 #include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
 
 static struct ep93xx_eth_data micro9_eth_data = {
 	.phy_id		= 0x1f,
diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c
index 7ee024d34829..5255dddd3067 100644
--- a/arch/arm/mach-ep93xx/ts72xx.c
+++ b/arch/arm/mach-ep93xx/ts72xx.c
@@ -12,19 +12,18 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
-#include <linux/m48t86.h>
 #include <linux/io.h>
-#include <linux/i2c.h>
+#include <linux/m48t86.h>
+#include <linux/mtd/physmap.h>
+
 #include <mach/hardware.h>
+#include <mach/ts72xx.h>
+
 #include <asm/mach-types.h>
-#include <asm/mach/arch.h>
 #include <asm/mach/map.h>
+#include <asm/mach/arch.h>
+
 
 static struct map_desc ts72xx_io_desc[] __initdata = {
 	{
diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c
index 4ac04055c2ea..69956cdae3c2 100644
--- a/arch/arm/mach-integrator/integrator_cp.c
+++ b/arch/arm/mach-integrator/integrator_cp.c
@@ -403,6 +403,8 @@ static unsigned int mmc_status(struct device *dev)
 static struct mmc_platform_data mmc_data = {
 	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
 	.status		= mmc_status,
+	.gpio_wp	= -1,
+	.gpio_cd	= -1,
 };
 
 static struct amba_device mmc_device = {
diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c
index d927eddcad46..9e87e08fb121 100644
--- a/arch/arm/mach-mx3/devices.c
+++ b/arch/arm/mach-mx3/devices.c
@@ -22,7 +22,6 @@
 #include <linux/platform_device.h>
 #include <linux/serial.h>
 #include <linux/gpio.h>
-#include <linux/dma-mapping.h>
 #include <mach/hardware.h>
 #include <mach/irqs.h>
 #include <mach/common.h>
diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index e70fc7c66bbb..ed2a48a9ce74 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -36,7 +36,6 @@
 #include <mach/hwa742.h>
 #include <mach/lcd_mipid.h>
 #include <mach/mmc.h>
-#include <mach/usb.h>
 #include <mach/clock.h>
 
 #define ADS7846_PENDOWN_GPIO	15
@@ -205,9 +204,11 @@ static int nokia770_mmc_get_cover_state(struct device *dev, int slot)
 static struct omap_mmc_platform_data nokia770_mmc2_data = {
 	.nr_slots                       = 1,
 	.dma_mask			= 0xffffffff,
+	.max_freq                       = 12000000,
 	.slots[0]       = {
 		.set_power		= nokia770_mmc_set_power,
 		.get_cover_state	= nokia770_mmc_get_cover_state,
+		.ocr_mask               = MMC_VDD_32_33|MMC_VDD_33_34,
 		.name                   = "mmcblk",
 	},
 };
diff --git a/arch/arm/mach-omap1/mailbox.c b/arch/arm/mach-omap1/mailbox.c
index 0af4d6c85b47..6810b4aeb02c 100644
--- a/arch/arm/mach-omap1/mailbox.c
+++ b/arch/arm/mach-omap1/mailbox.c
@@ -203,5 +203,5 @@ module_exit(omap1_mbox_exit);
 
 MODULE_LICENSE("GPL v2");
 MODULE_DESCRIPTION("omap mailbox: omap1 architecture specific functions");
-MODULE_AUTHOR("Hiroshi DOYU" <Hiroshi.DOYU@nokia.com>);
+MODULE_AUTHOR("Hiroshi DOYU <Hiroshi.DOYU@nokia.com>");
 MODULE_ALIAS("platform:omap1-mailbox");
diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c
index a2d7814896be..505d98cfe508 100644
--- a/arch/arm/mach-omap1/mcbsp.c
+++ b/arch/arm/mach-omap1/mcbsp.c
@@ -19,7 +19,6 @@
 
 #include <mach/irqs.h>
 #include <mach/dma.h>
-#include <mach/irqs.h>
 #include <mach/mux.h>
 #include <mach/cpu.h>
 #include <mach/mcbsp.h>
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index da93b86234ed..9a0bf6744a05 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -362,6 +362,7 @@ static struct omap_onenand_platform_data board_onenand_data = {
 	.gpio_irq	= 65,
 	.parts		= onenand_partitions,
 	.nr_parts	= ARRAY_SIZE(onenand_partitions),
+	.flags		= ONENAND_SYNC_READWRITE,
 };
 
 static void __init board_onenand_init(void)
diff --git a/arch/arm/mach-omap2/gpmc-onenand.c b/arch/arm/mach-omap2/gpmc-onenand.c
index 2fd22f9c5f0e..54fec53a48e7 100644
--- a/arch/arm/mach-omap2/gpmc-onenand.c
+++ b/arch/arm/mach-omap2/gpmc-onenand.c
@@ -31,6 +31,8 @@ static struct platform_device gpmc_onenand_device = {
 static int omap2_onenand_set_async_mode(int cs, void __iomem *onenand_base)
 {
 	struct gpmc_timings t;
+	u32 reg;
+	int err;
 
 	const int t_cer = 15;
 	const int t_avdp = 12;
@@ -43,6 +45,11 @@ static int omap2_onenand_set_async_mode(int cs, void __iomem *onenand_base)
 	const int t_wpl = 40;
 	const int t_wph = 30;
 
+	/* Ensure sync read and sync write are disabled */
+	reg = readw(onenand_base + ONENAND_REG_SYS_CFG1);
+	reg &= ~ONENAND_SYS_CFG1_SYNC_READ & ~ONENAND_SYS_CFG1_SYNC_WRITE;
+	writew(reg, onenand_base + ONENAND_REG_SYS_CFG1);
+
 	memset(&t, 0, sizeof(t));
 	t.sync_clk = 0;
 	t.cs_on = 0;
@@ -74,7 +81,16 @@ static int omap2_onenand_set_async_mode(int cs, void __iomem *onenand_base)
 			  GPMC_CONFIG1_DEVICESIZE_16 |
 			  GPMC_CONFIG1_MUXADDDATA);
 
-	return gpmc_cs_set_timings(cs, &t);
+	err = gpmc_cs_set_timings(cs, &t);
+	if (err)
+		return err;
+
+	/* Ensure sync read and sync write are disabled */
+	reg = readw(onenand_base + ONENAND_REG_SYS_CFG1);
+	reg &= ~ONENAND_SYS_CFG1_SYNC_READ & ~ONENAND_SYS_CFG1_SYNC_WRITE;
+	writew(reg, onenand_base + ONENAND_REG_SYS_CFG1);
+
+	return 0;
 }
 
 static void set_onenand_cfg(void __iomem *onenand_base, int latency,
@@ -124,7 +140,8 @@ static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg,
 	} else if (cfg->flags & ONENAND_SYNC_READWRITE) {
 		sync_read = 1;
 		sync_write = 1;
-	}
+	} else
+		return omap2_onenand_set_async_mode(cs, onenand_base);
 
 	if (!freq) {
 		/* Very first call freq is not known */
diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index 458990e20c60..a98201cc265c 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -48,6 +48,28 @@ int omap_chip_is(struct omap_chip_id oci)
 }
 EXPORT_SYMBOL(omap_chip_is);
 
+int omap_type(void)
+{
+	u32 val = 0;
+
+	if (cpu_is_omap24xx())
+		val = omap_ctrl_readl(OMAP24XX_CONTROL_STATUS);
+	else if (cpu_is_omap34xx())
+		val = omap_ctrl_readl(OMAP343X_CONTROL_STATUS);
+	else {
+		pr_err("Cannot detect omap type!\n");
+		goto out;
+	}
+
+	val &= OMAP2_DEVICETYPE_MASK;
+	val >>= 8;
+
+out:
+	return val;
+}
+EXPORT_SYMBOL(omap_type);
+
+
 /*----------------------------------------------------------------------------*/
 
 #define OMAP_TAP_IDCODE		0x0204
diff --git a/arch/arm/mach-omap2/mailbox.c b/arch/arm/mach-omap2/mailbox.c
index fd5b8a5925cc..6f71f3730c97 100644
--- a/arch/arm/mach-omap2/mailbox.c
+++ b/arch/arm/mach-omap2/mailbox.c
@@ -282,12 +282,12 @@ static int __devinit omap2_mbox_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	/* DSP or IVA2 IRQ */
-	mbox_dsp_info.irq = platform_get_irq(pdev, 0);
-	if (mbox_dsp_info.irq < 0) {
+	ret = platform_get_irq(pdev, 0);
+	if (ret < 0) {
 		dev_err(&pdev->dev, "invalid irq resource\n");
-		ret = -ENODEV;
 		goto err_dsp;
 	}
+	mbox_dsp_info.irq = ret;
 
 	ret = omap_mbox_register(&pdev->dev, &mbox_dsp_info);
 	if (ret)
diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c
index a5c0f0435cd6..99b6e1546311 100644
--- a/arch/arm/mach-omap2/mcbsp.c
+++ b/arch/arm/mach-omap2/mcbsp.c
@@ -19,7 +19,6 @@
 
 #include <mach/irqs.h>
 #include <mach/dma.h>
-#include <mach/irqs.h>
 #include <mach/mux.h>
 #include <mach/cpu.h>
 #include <mach/mcbsp.h>
diff --git a/arch/arm/mach-omap2/mmc-twl4030.c b/arch/arm/mach-omap2/mmc-twl4030.c
index 9756a878fd90..1541fd4c8d0f 100644
--- a/arch/arm/mach-omap2/mmc-twl4030.c
+++ b/arch/arm/mach-omap2/mmc-twl4030.c
@@ -263,8 +263,19 @@ static int twl_mmc1_set_power(struct device *dev, int slot, int power_on,
 static int twl_mmc23_set_power(struct device *dev, int slot, int power_on, int vdd)
 {
 	int ret = 0;
-	struct twl_mmc_controller *c = &hsmmc[1];
+	struct twl_mmc_controller *c = NULL;
 	struct omap_mmc_platform_data *mmc = dev->platform_data;
+	int i;
+
+	for (i = 1; i < ARRAY_SIZE(hsmmc); i++) {
+		if (mmc == hsmmc[i].mmc) {
+			c = &hsmmc[i];
+			break;
+		}
+	}
+
+	if (c == NULL)
+		return -ENODEV;
 
 	/* If we don't see a Vcc regulator, assume it's a fixed
 	 * voltage always-on regulator.
diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c
index 9ea9c05093cd..ab615e78b798 100644
--- a/arch/arm/mach-realview/core.c
+++ b/arch/arm/mach-realview/core.c
@@ -222,6 +222,9 @@ arch_initcall(realview_i2c_init);
 
 #define REALVIEW_SYSMCI	(__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_MCI_OFFSET)
 
+/*
+ * This is only used if GPIOLIB support is disabled
+ */
 static unsigned int realview_mmc_status(struct device *dev)
 {
 	struct amba_device *adev = container_of(dev, struct amba_device, dev);
@@ -238,11 +241,15 @@ static unsigned int realview_mmc_status(struct device *dev)
 struct mmc_platform_data realview_mmc0_plat_data = {
 	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
 	.status		= realview_mmc_status,
+	.gpio_wp	= 17,
+	.gpio_cd	= 16,
 };
 
 struct mmc_platform_data realview_mmc1_plat_data = {
 	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
 	.status		= realview_mmc_status,
+	.gpio_wp	= 19,
+	.gpio_cd	= 18,
 };
 
 /*
diff --git a/arch/arm/mach-realview/include/mach/gpio.h b/arch/arm/mach-realview/include/mach/gpio.h
new file mode 100644
index 000000000000..94ff27678a46
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/gpio.h
@@ -0,0 +1,6 @@
+#include <asm-generic/gpio.h>
+
+#define gpio_get_value	__gpio_get_value
+#define gpio_set_value	__gpio_set_value
+#define gpio_cansleep	__gpio_cansleep
+#define gpio_to_irq	__gpio_to_irq
diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c
index 8dfa44e08a94..abd13b448671 100644
--- a/arch/arm/mach-realview/realview_eb.c
+++ b/arch/arm/mach-realview/realview_eb.c
@@ -23,6 +23,7 @@
 #include <linux/platform_device.h>
 #include <linux/sysdev.h>
 #include <linux/amba/bus.h>
+#include <linux/amba/pl061.h>
 #include <linux/io.h>
 
 #include <mach/hardware.h>
@@ -113,6 +114,21 @@ static void __init realview_eb_map_io(void)
 		iotable_init(realview_eb11mp_io_desc, ARRAY_SIZE(realview_eb11mp_io_desc));
 }
 
+static struct pl061_platform_data gpio0_plat_data = {
+	.gpio_base	= 0,
+	.irq_base	= -1,
+};
+
+static struct pl061_platform_data gpio1_plat_data = {
+	.gpio_base	= 8,
+	.irq_base	= -1,
+};
+
+static struct pl061_platform_data gpio2_plat_data = {
+	.gpio_base	= 16,
+	.irq_base	= -1,
+};
+
 /*
  * RealView EB AMBA devices
  */
@@ -189,9 +205,9 @@ AMBA_DEVICE(clcd,  "dev:20",  EB_CLCD,  &clcd_plat_data);
 AMBA_DEVICE(dmac,  "dev:30",  DMAC,     NULL);
 AMBA_DEVICE(sctl,  "dev:e0",  SCTL,     NULL);
 AMBA_DEVICE(wdog,  "dev:e1",  EB_WATCHDOG, NULL);
-AMBA_DEVICE(gpio0, "dev:e4",  EB_GPIO0, NULL);
-AMBA_DEVICE(gpio1, "dev:e5",  GPIO1,    NULL);
-AMBA_DEVICE(gpio2, "dev:e6",  GPIO2,    NULL);
+AMBA_DEVICE(gpio0, "dev:e4",  EB_GPIO0, &gpio0_plat_data);
+AMBA_DEVICE(gpio1, "dev:e5",  GPIO1,    &gpio1_plat_data);
+AMBA_DEVICE(gpio2, "dev:e6",  GPIO2,    &gpio2_plat_data);
 AMBA_DEVICE(rtc,   "dev:e8",  EB_RTC,   NULL);
 AMBA_DEVICE(sci0,  "dev:f0",  SCI,      NULL);
 AMBA_DEVICE(uart0, "dev:f1",  EB_UART0, NULL);
diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c
index 25efe71a67c7..17fbb0e889b6 100644
--- a/arch/arm/mach-realview/realview_pb1176.c
+++ b/arch/arm/mach-realview/realview_pb1176.c
@@ -23,6 +23,7 @@
 #include <linux/platform_device.h>
 #include <linux/sysdev.h>
 #include <linux/amba/bus.h>
+#include <linux/amba/pl061.h>
 #include <linux/io.h>
 
 #include <mach/hardware.h>
@@ -107,6 +108,21 @@ static void __init realview_pb1176_map_io(void)
 	iotable_init(realview_pb1176_io_desc, ARRAY_SIZE(realview_pb1176_io_desc));
 }
 
+static struct pl061_platform_data gpio0_plat_data = {
+	.gpio_base	= 0,
+	.irq_base	= -1,
+};
+
+static struct pl061_platform_data gpio1_plat_data = {
+	.gpio_base	= 8,
+	.irq_base	= -1,
+};
+
+static struct pl061_platform_data gpio2_plat_data = {
+	.gpio_base	= 16,
+	.irq_base	= -1,
+};
+
 /*
  * RealView PB1176 AMBA devices
  */
@@ -164,9 +180,9 @@ AMBA_DEVICE(uart3,	"fpga:09",	PB1176_UART3,	NULL);
 AMBA_DEVICE(smc,	"dev:00",	PB1176_SMC,	NULL);
 AMBA_DEVICE(sctl,	"dev:e0",	SCTL,		NULL);
 AMBA_DEVICE(wdog,	"dev:e1",	PB1176_WATCHDOG,	NULL);
-AMBA_DEVICE(gpio0,	"dev:e4",	PB1176_GPIO0,	NULL);
-AMBA_DEVICE(gpio1,	"dev:e5",	GPIO1,		NULL);
-AMBA_DEVICE(gpio2,	"dev:e6",	GPIO2,		NULL);
+AMBA_DEVICE(gpio0,	"dev:e4",	PB1176_GPIO0,	&gpio0_plat_data);
+AMBA_DEVICE(gpio1,	"dev:e5",	GPIO1,		&gpio1_plat_data);
+AMBA_DEVICE(gpio2,	"dev:e6",	GPIO2,		&gpio2_plat_data);
 AMBA_DEVICE(rtc,	"dev:e8",	PB1176_RTC,	NULL);
 AMBA_DEVICE(sci0,	"dev:f0",	SCI,		NULL);
 AMBA_DEVICE(uart0,	"dev:f1",	PB1176_UART0,	NULL);
diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c
index dc4b16943907..fdd042b85f40 100644
--- a/arch/arm/mach-realview/realview_pb11mp.c
+++ b/arch/arm/mach-realview/realview_pb11mp.c
@@ -23,6 +23,7 @@
 #include <linux/platform_device.h>
 #include <linux/sysdev.h>
 #include <linux/amba/bus.h>
+#include <linux/amba/pl061.h>
 #include <linux/io.h>
 
 #include <mach/hardware.h>
@@ -108,6 +109,21 @@ static void __init realview_pb11mp_map_io(void)
 	iotable_init(realview_pb11mp_io_desc, ARRAY_SIZE(realview_pb11mp_io_desc));
 }
 
+static struct pl061_platform_data gpio0_plat_data = {
+	.gpio_base	= 0,
+	.irq_base	= -1,
+};
+
+static struct pl061_platform_data gpio1_plat_data = {
+	.gpio_base	= 8,
+	.irq_base	= -1,
+};
+
+static struct pl061_platform_data gpio2_plat_data = {
+	.gpio_base	= 16,
+	.irq_base	= -1,
+};
+
 /*
  * RealView PB11MPCore AMBA devices
  */
@@ -166,9 +182,9 @@ AMBA_DEVICE(uart3,	"fpga:09",	PB11MP_UART3,	NULL);
 AMBA_DEVICE(smc,	"dev:00",	PB11MP_SMC,	NULL);
 AMBA_DEVICE(sctl,	"dev:e0",	SCTL,		NULL);
 AMBA_DEVICE(wdog,	"dev:e1",	PB11MP_WATCHDOG, NULL);
-AMBA_DEVICE(gpio0,	"dev:e4",	PB11MP_GPIO0,	NULL);
-AMBA_DEVICE(gpio1,	"dev:e5",	GPIO1,		NULL);
-AMBA_DEVICE(gpio2,	"dev:e6",	GPIO2,		NULL);
+AMBA_DEVICE(gpio0,	"dev:e4",	PB11MP_GPIO0,	&gpio0_plat_data);
+AMBA_DEVICE(gpio1,	"dev:e5",	GPIO1,		&gpio1_plat_data);
+AMBA_DEVICE(gpio2,	"dev:e6",	GPIO2,		&gpio2_plat_data);
 AMBA_DEVICE(rtc,	"dev:e8",	PB11MP_RTC,	NULL);
 AMBA_DEVICE(sci0,	"dev:f0",	SCI,		NULL);
 AMBA_DEVICE(uart0,	"dev:f1",	PB11MP_UART0,	NULL);
diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c
index d6ac1eb86576..70bba9900d97 100644
--- a/arch/arm/mach-realview/realview_pba8.c
+++ b/arch/arm/mach-realview/realview_pba8.c
@@ -23,6 +23,7 @@
 #include <linux/platform_device.h>
 #include <linux/sysdev.h>
 #include <linux/amba/bus.h>
+#include <linux/amba/pl061.h>
 #include <linux/io.h>
 
 #include <asm/irq.h>
@@ -98,6 +99,21 @@ static void __init realview_pba8_map_io(void)
 	iotable_init(realview_pba8_io_desc, ARRAY_SIZE(realview_pba8_io_desc));
 }
 
+static struct pl061_platform_data gpio0_plat_data = {
+	.gpio_base	= 0,
+	.irq_base	= -1,
+};
+
+static struct pl061_platform_data gpio1_plat_data = {
+	.gpio_base	= 8,
+	.irq_base	= -1,
+};
+
+static struct pl061_platform_data gpio2_plat_data = {
+	.gpio_base	= 16,
+	.irq_base	= -1,
+};
+
 /*
  * RealView PBA8Core AMBA devices
  */
@@ -156,9 +172,9 @@ AMBA_DEVICE(uart3,	"fpga:09",	PBA8_UART3,	NULL);
 AMBA_DEVICE(smc,	"dev:00",	PBA8_SMC,	NULL);
 AMBA_DEVICE(sctl,	"dev:e0",	SCTL,		NULL);
 AMBA_DEVICE(wdog,	"dev:e1",	PBA8_WATCHDOG, NULL);
-AMBA_DEVICE(gpio0,	"dev:e4",	PBA8_GPIO0,	NULL);
-AMBA_DEVICE(gpio1,	"dev:e5",	GPIO1,		NULL);
-AMBA_DEVICE(gpio2,	"dev:e6",	GPIO2,		NULL);
+AMBA_DEVICE(gpio0,	"dev:e4",	PBA8_GPIO0,	&gpio0_plat_data);
+AMBA_DEVICE(gpio1,	"dev:e5",	GPIO1,		&gpio1_plat_data);
+AMBA_DEVICE(gpio2,	"dev:e6",	GPIO2,		&gpio2_plat_data);
 AMBA_DEVICE(rtc,	"dev:e8",	PBA8_RTC,	NULL);
 AMBA_DEVICE(sci0,	"dev:f0",	SCI,		NULL);
 AMBA_DEVICE(uart0,	"dev:f1",	PBA8_UART0,	NULL);
diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c
index ede2a57240a3..ce6c5d25fbef 100644
--- a/arch/arm/mach-realview/realview_pbx.c
+++ b/arch/arm/mach-realview/realview_pbx.c
@@ -22,6 +22,7 @@
 #include <linux/platform_device.h>
 #include <linux/sysdev.h>
 #include <linux/amba/bus.h>
+#include <linux/amba/pl061.h>
 #include <linux/io.h>
 
 #include <asm/irq.h>
@@ -118,6 +119,21 @@ static void __init realview_pbx_map_io(void)
 		iotable_init(realview_local_io_desc, ARRAY_SIZE(realview_local_io_desc));
 }
 
+static struct pl061_platform_data gpio0_plat_data = {
+	.gpio_base	= 0,
+	.irq_base	= -1,
+};
+
+static struct pl061_platform_data gpio1_plat_data = {
+	.gpio_base	= 8,
+	.irq_base	= -1,
+};
+
+static struct pl061_platform_data gpio2_plat_data = {
+	.gpio_base	= 16,
+	.irq_base	= -1,
+};
+
 /*
  * RealView PBXCore AMBA devices
  */
@@ -176,9 +192,9 @@ AMBA_DEVICE(uart3,	"fpga:09",	PBX_UART3,	NULL);
 AMBA_DEVICE(smc,	"dev:00",	PBX_SMC,	NULL);
 AMBA_DEVICE(sctl,	"dev:e0",	SCTL,		NULL);
 AMBA_DEVICE(wdog,	"dev:e1",	PBX_WATCHDOG, 	NULL);
-AMBA_DEVICE(gpio0,	"dev:e4",	PBX_GPIO0,	NULL);
-AMBA_DEVICE(gpio1,	"dev:e5",	GPIO1,		NULL);
-AMBA_DEVICE(gpio2,	"dev:e6",	GPIO2,		NULL);
+AMBA_DEVICE(gpio0,	"dev:e4",	PBX_GPIO0,	&gpio0_plat_data);
+AMBA_DEVICE(gpio1,	"dev:e5",	GPIO1,		&gpio1_plat_data);
+AMBA_DEVICE(gpio2,	"dev:e6",	GPIO2,		&gpio2_plat_data);
 AMBA_DEVICE(rtc,	"dev:e8",	PBX_RTC,	NULL);
 AMBA_DEVICE(sci0,	"dev:f0",	SCI,		NULL);
 AMBA_DEVICE(uart0,	"dev:f1",	PBX_UART0,	NULL);
diff --git a/arch/arm/mach-s3c2440/mach-mini2440.c b/arch/arm/mach-s3c2440/mach-mini2440.c
index 6a5bc3021bdb..ec71a6965786 100644
--- a/arch/arm/mach-s3c2440/mach-mini2440.c
+++ b/arch/arm/mach-s3c2440/mach-mini2440.c
@@ -48,8 +48,6 @@
 #include <plat/mci.h>
 #include <plat/udc.h>
 
-#include <plat/regs-serial.h>
-
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/nand_ecc.h>
@@ -275,6 +273,7 @@ static struct s3c2410_nand_set mini2440_nand_sets[] __initdata = {
 		.nr_chips	= 1,
 		.nr_partitions	= ARRAY_SIZE(mini2440_default_nand_part),
 		.partitions	= mini2440_default_nand_part,
+		.flash_bbt 	= 1, /* we use u-boot to create a BBT */
 	},
 };
 
diff --git a/arch/arm/mach-s3c2442/mach-gta02.c b/arch/arm/mach-s3c2442/mach-gta02.c
index e23b581aa0e1..0fb385bd9cd9 100644
--- a/arch/arm/mach-s3c2442/mach-gta02.c
+++ b/arch/arm/mach-s3c2442/mach-gta02.c
@@ -433,8 +433,7 @@ static struct s3c2410_nand_set gta02_nand_sets[] = {
 		 */
 		.name		= "neo1973-nand",
 		.nr_chips	= 1,
-		.use_bbt	= 1,
-		.force_soft_ecc	= 1,
+		.flash_bbt	= 1,
 	},
 };
 
diff --git a/arch/arm/mach-u300/clock.c b/arch/arm/mach-u300/clock.c
index 5cd04d6751b3..111f7ea32b38 100644
--- a/arch/arm/mach-u300/clock.c
+++ b/arch/arm/mach-u300/clock.c
@@ -24,6 +24,7 @@
 #include <linux/init.h>
 #include <linux/timer.h>
 #include <linux/io.h>
+#include <linux/seq_file.h>
 
 #include <asm/clkdev.h>
 #include <mach/hardware.h>
@@ -702,6 +703,7 @@ static struct clk amba_clk = {
 	.rate	    = 52000000, /* this varies! */
 	.hw_ctrld   = true,
 	.reset	    = false,
+	.lock       = __SPIN_LOCK_UNLOCKED(amba_clk.lock),
 };
 
 /*
@@ -720,6 +722,7 @@ static struct clk cpu_clk = {
 	.set_rate   = clk_set_rate_cpuclk,
 	.get_rate   = clk_get_rate_cpuclk,
 	.round_rate = clk_round_rate_cpuclk,
+	.lock       = __SPIN_LOCK_UNLOCKED(cpu_clk.lock),
 };
 
 static struct clk nandif_clk = {
@@ -732,6 +735,7 @@ static struct clk nandif_clk = {
 	.clk_val    = U300_SYSCON_SBCER_NANDIF_CLK_EN,
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
+	.lock       = __SPIN_LOCK_UNLOCKED(nandif_clk.lock),
 };
 
 static struct clk semi_clk = {
@@ -744,6 +748,7 @@ static struct clk semi_clk = {
 	.clk_val    = U300_SYSCON_SBCER_SEMI_CLK_EN,
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
+	.lock       = __SPIN_LOCK_UNLOCKED(semi_clk.lock),
 };
 
 #ifdef CONFIG_MACH_U300_BS335
@@ -758,6 +763,7 @@ static struct clk isp_clk = {
 	.clk_val    = U300_SYSCON_SBCER_ISP_CLK_EN,
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
+	.lock       = __SPIN_LOCK_UNLOCKED(isp_clk.lock),
 };
 
 static struct clk cds_clk = {
@@ -771,6 +777,7 @@ static struct clk cds_clk = {
 	.clk_val    = U300_SYSCON_SBCER_CDS_CLK_EN,
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
+	.lock       = __SPIN_LOCK_UNLOCKED(cds_clk.lock),
 };
 #endif
 
@@ -785,6 +792,7 @@ static struct clk dma_clk = {
 	.clk_val    = U300_SYSCON_SBCER_DMAC_CLK_EN,
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
+	.lock       = __SPIN_LOCK_UNLOCKED(dma_clk.lock),
 };
 
 static struct clk aaif_clk = {
@@ -798,6 +806,7 @@ static struct clk aaif_clk = {
 	.clk_val    = U300_SYSCON_SBCER_AAIF_CLK_EN,
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
+	.lock       = __SPIN_LOCK_UNLOCKED(aaif_clk.lock),
 };
 
 static struct clk apex_clk = {
@@ -811,6 +820,7 @@ static struct clk apex_clk = {
 	.clk_val    = U300_SYSCON_SBCER_APEX_CLK_EN,
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
+	.lock       = __SPIN_LOCK_UNLOCKED(apex_clk.lock),
 };
 
 static struct clk video_enc_clk = {
@@ -825,6 +835,7 @@ static struct clk video_enc_clk = {
 	.clk_val    = U300_SYSCON_SBCER_VIDEO_ENC_CLK_EN,
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
+	.lock       = __SPIN_LOCK_UNLOCKED(video_enc_clk.lock),
 };
 
 static struct clk xgam_clk = {
@@ -839,6 +850,7 @@ static struct clk xgam_clk = {
 	.get_rate   = clk_get_rate_xgamclk,
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
+	.lock       = __SPIN_LOCK_UNLOCKED(xgam_clk.lock),
 };
 
 /* This clock is used to activate the video encoder */
@@ -854,6 +866,7 @@ static struct clk ahb_clk = {
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
 	.get_rate   = clk_get_rate_ahb_clk,
+	.lock       = __SPIN_LOCK_UNLOCKED(ahb_clk.lock),
 };
 
 
@@ -871,6 +884,7 @@ static struct clk ahb_subsys_clk = {
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
 	.get_rate   = clk_get_rate_ahb_clk,
+	.lock       = __SPIN_LOCK_UNLOCKED(ahb_subsys_clk.lock),
 };
 
 static struct clk intcon_clk = {
@@ -882,6 +896,8 @@ static struct clk intcon_clk = {
 	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RRR,
 	.res_mask   = U300_SYSCON_RRR_INTCON_RESET_EN,
 	/* INTCON can be reset but not clock-gated */
+	.lock       = __SPIN_LOCK_UNLOCKED(intcon_clk.lock),
+
 };
 
 static struct clk mspro_clk = {
@@ -895,6 +911,7 @@ static struct clk mspro_clk = {
 	.clk_val    = U300_SYSCON_SBCER_MSPRO_CLK_EN,
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
+	.lock       = __SPIN_LOCK_UNLOCKED(mspro_clk.lock),
 };
 
 static struct clk emif_clk = {
@@ -909,6 +926,7 @@ static struct clk emif_clk = {
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
 	.get_rate   = clk_get_rate_emif_clk,
+	.lock       = __SPIN_LOCK_UNLOCKED(emif_clk.lock),
 };
 
 
@@ -926,6 +944,7 @@ static struct clk fast_clk = {
 	.clk_val    = U300_SYSCON_SBCER_FAST_BRIDGE_CLK_EN,
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
+	.lock       = __SPIN_LOCK_UNLOCKED(fast_clk.lock),
 };
 
 static struct clk mmcsd_clk = {
@@ -942,6 +961,7 @@ static struct clk mmcsd_clk = {
 	.round_rate = clk_round_rate_mclk,
 	.disable    = syscon_clk_disable,
 	.enable     = syscon_clk_enable,
+	.lock       = __SPIN_LOCK_UNLOCKED(mmcsd_clk.lock),
 };
 
 static struct clk i2s0_clk = {
@@ -956,6 +976,7 @@ static struct clk i2s0_clk = {
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
 	.get_rate   = clk_get_rate_i2s_i2c_spi,
+	.lock       = __SPIN_LOCK_UNLOCKED(i2s0_clk.lock),
 };
 
 static struct clk i2s1_clk = {
@@ -970,6 +991,7 @@ static struct clk i2s1_clk = {
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
 	.get_rate   = clk_get_rate_i2s_i2c_spi,
+	.lock       = __SPIN_LOCK_UNLOCKED(i2s1_clk.lock),
 };
 
 static struct clk i2c0_clk = {
@@ -984,6 +1006,7 @@ static struct clk i2c0_clk = {
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
 	.get_rate   = clk_get_rate_i2s_i2c_spi,
+	.lock       = __SPIN_LOCK_UNLOCKED(i2c0_clk.lock),
 };
 
 static struct clk i2c1_clk = {
@@ -998,6 +1021,7 @@ static struct clk i2c1_clk = {
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
 	.get_rate   = clk_get_rate_i2s_i2c_spi,
+	.lock       = __SPIN_LOCK_UNLOCKED(i2c1_clk.lock),
 };
 
 static struct clk spi_clk = {
@@ -1012,6 +1036,7 @@ static struct clk spi_clk = {
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
 	.get_rate   = clk_get_rate_i2s_i2c_spi,
+	.lock       = __SPIN_LOCK_UNLOCKED(spi_clk.lock),
 };
 
 #ifdef CONFIG_MACH_U300_BS335
@@ -1026,6 +1051,7 @@ static struct clk uart1_clk = {
 	.clk_val    = U300_SYSCON_SBCER_UART1_CLK_EN,
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
+	.lock       = __SPIN_LOCK_UNLOCKED(uart1_clk.lock),
 };
 #endif
 
@@ -1044,6 +1070,7 @@ static struct clk slow_clk = {
 	.clk_val    = U300_SYSCON_SBCER_SLOW_BRIDGE_CLK_EN,
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
+	.lock       = __SPIN_LOCK_UNLOCKED(slow_clk.lock),
 };
 
 /* TODO: implement SYSCON clock? */
@@ -1055,6 +1082,7 @@ static struct clk wdog_clk = {
 	.rate	    = 32768,
 	.reset	    = false,
 	/* This is always on, cannot be enabled/disabled or reset */
+	.lock       = __SPIN_LOCK_UNLOCKED(wdog_clk.lock),
 };
 
 /* This one is hardwired to PLL13 */
@@ -1069,6 +1097,7 @@ static struct clk uart_clk = {
 	.clk_val    = U300_SYSCON_SBCER_UART_CLK_EN,
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
+	.lock       = __SPIN_LOCK_UNLOCKED(uart_clk.lock),
 };
 
 static struct clk keypad_clk = {
@@ -1082,6 +1111,7 @@ static struct clk keypad_clk = {
 	.clk_val    = U300_SYSCON_SBCER_KEYPAD_CLK_EN,
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
+	.lock       = __SPIN_LOCK_UNLOCKED(keypad_clk.lock),
 };
 
 static struct clk gpio_clk = {
@@ -1095,6 +1125,7 @@ static struct clk gpio_clk = {
 	.clk_val    = U300_SYSCON_SBCER_GPIO_CLK_EN,
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
+	.lock       = __SPIN_LOCK_UNLOCKED(gpio_clk.lock),
 };
 
 static struct clk rtc_clk = {
@@ -1106,6 +1137,7 @@ static struct clk rtc_clk = {
 	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RSR,
 	.res_mask   = U300_SYSCON_RSR_RTC_RESET_EN,
 	/* This clock is always on, cannot be enabled/disabled */
+	.lock       = __SPIN_LOCK_UNLOCKED(rtc_clk.lock),
 };
 
 static struct clk bustr_clk = {
@@ -1119,6 +1151,7 @@ static struct clk bustr_clk = {
 	.clk_val    = U300_SYSCON_SBCER_BTR_CLK_EN,
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
+	.lock       = __SPIN_LOCK_UNLOCKED(bustr_clk.lock),
 };
 
 static struct clk evhist_clk = {
@@ -1132,6 +1165,7 @@ static struct clk evhist_clk = {
 	.clk_val    = U300_SYSCON_SBCER_EH_CLK_EN,
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
+	.lock       = __SPIN_LOCK_UNLOCKED(evhist_clk.lock),
 };
 
 static struct clk timer_clk = {
@@ -1145,6 +1179,7 @@ static struct clk timer_clk = {
 	.clk_val    = U300_SYSCON_SBCER_ACC_TMR_CLK_EN,
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
+	.lock       = __SPIN_LOCK_UNLOCKED(timer_clk.lock),
 };
 
 static struct clk app_timer_clk = {
@@ -1158,6 +1193,7 @@ static struct clk app_timer_clk = {
 	.clk_val    = U300_SYSCON_SBCER_APP_TMR_CLK_EN,
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
+	.lock       = __SPIN_LOCK_UNLOCKED(app_timer_clk.lock),
 };
 
 #ifdef CONFIG_MACH_U300_BS335
@@ -1172,6 +1208,7 @@ static struct clk ppm_clk = {
 	.clk_val    = U300_SYSCON_SBCER_PPM_CLK_EN,
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
+	.lock       = __SPIN_LOCK_UNLOCKED(ppm_clk.lock),
 };
 #endif
 
@@ -1187,53 +1224,53 @@ static struct clk ppm_clk = {
  */
 static struct clk_lookup lookups[] = {
 	/* Connected directly to the AMBA bus */
-	DEF_LOOKUP("amba", &amba_clk),
-	DEF_LOOKUP("cpu", &cpu_clk),
-	DEF_LOOKUP("nandif", &nandif_clk),
-	DEF_LOOKUP("semi", &semi_clk),
+	DEF_LOOKUP("amba",      &amba_clk),
+	DEF_LOOKUP("cpu",       &cpu_clk),
+	DEF_LOOKUP("fsmc",      &nandif_clk),
+	DEF_LOOKUP("semi",      &semi_clk),
 #ifdef CONFIG_MACH_U300_BS335
-	DEF_LOOKUP("isp", &isp_clk),
-	DEF_LOOKUP("cds", &cds_clk),
+	DEF_LOOKUP("isp",       &isp_clk),
+	DEF_LOOKUP("cds",       &cds_clk),
 #endif
-	DEF_LOOKUP("dma", &dma_clk),
-	DEF_LOOKUP("aaif", &aaif_clk),
-	DEF_LOOKUP("apex", &apex_clk),
+	DEF_LOOKUP("dma",       &dma_clk),
+	DEF_LOOKUP("msl",       &aaif_clk),
+	DEF_LOOKUP("apex",      &apex_clk),
 	DEF_LOOKUP("video_enc", &video_enc_clk),
-	DEF_LOOKUP("xgam", &xgam_clk),
-	DEF_LOOKUP("ahb", &ahb_clk),
+	DEF_LOOKUP("xgam",      &xgam_clk),
+	DEF_LOOKUP("ahb",       &ahb_clk),
 	/* AHB bridge clocks */
-	DEF_LOOKUP("ahb", &ahb_subsys_clk),
-	DEF_LOOKUP("intcon", &intcon_clk),
-	DEF_LOOKUP("mspro", &mspro_clk),
-	DEF_LOOKUP("pl172", &emif_clk),
+	DEF_LOOKUP("ahb_subsys", &ahb_subsys_clk),
+	DEF_LOOKUP("intcon",    &intcon_clk),
+	DEF_LOOKUP("mspro",     &mspro_clk),
+	DEF_LOOKUP("pl172",     &emif_clk),
 	/* FAST bridge clocks */
-	DEF_LOOKUP("fast", &fast_clk),
-	DEF_LOOKUP("mmci", &mmcsd_clk),
+	DEF_LOOKUP("fast",      &fast_clk),
+	DEF_LOOKUP("mmci",      &mmcsd_clk),
 	/*
 	 * The .0 and .1 identifiers on these comes from the platform device
 	 * .id field and are assigned when the platform devices are registered.
 	 */
-	DEF_LOOKUP("i2s.0", &i2s0_clk),
-	DEF_LOOKUP("i2s.1", &i2s1_clk),
-	DEF_LOOKUP("stddci2c.0", &i2c0_clk),
-	DEF_LOOKUP("stddci2c.1", &i2c1_clk),
-	DEF_LOOKUP("pl022", &spi_clk),
+	DEF_LOOKUP("i2s.0",     &i2s0_clk),
+	DEF_LOOKUP("i2s.1",     &i2s1_clk),
+	DEF_LOOKUP("stu300.0",  &i2c0_clk),
+	DEF_LOOKUP("stu300.1",  &i2c1_clk),
+	DEF_LOOKUP("pl022",     &spi_clk),
 #ifdef CONFIG_MACH_U300_BS335
-	DEF_LOOKUP("uart1", &uart1_clk),
+	DEF_LOOKUP("uart1",     &uart1_clk),
 #endif
 	/* SLOW bridge clocks */
-	DEF_LOOKUP("slow", &slow_clk),
-	DEF_LOOKUP("wdog", &wdog_clk),
-	DEF_LOOKUP("uart0", &uart_clk),
-	DEF_LOOKUP("apptimer", &app_timer_clk),
-	DEF_LOOKUP("keypad", &keypad_clk),
+	DEF_LOOKUP("slow",      &slow_clk),
+	DEF_LOOKUP("coh901327_wdog",      &wdog_clk),
+	DEF_LOOKUP("uart0",     &uart_clk),
+	DEF_LOOKUP("apptimer",  &app_timer_clk),
+	DEF_LOOKUP("coh901461-keypad",    &keypad_clk),
 	DEF_LOOKUP("u300-gpio", &gpio_clk),
-	DEF_LOOKUP("rtc0", &rtc_clk),
-	DEF_LOOKUP("bustr", &bustr_clk),
-	DEF_LOOKUP("evhist", &evhist_clk),
-	DEF_LOOKUP("timer", &timer_clk),
+	DEF_LOOKUP("rtc-coh901331",      &rtc_clk),
+	DEF_LOOKUP("bustr",     &bustr_clk),
+	DEF_LOOKUP("evhist",    &evhist_clk),
+	DEF_LOOKUP("timer",     &timer_clk),
 #ifdef CONFIG_MACH_U300_BS335
-	DEF_LOOKUP("ppm", &ppm_clk),
+	DEF_LOOKUP("ppm",       &ppm_clk),
 #endif
 };
 
@@ -1427,16 +1464,20 @@ static const struct file_operations u300_clocks_operations = {
 	.release	= single_release,
 };
 
-static void init_clk_read_procfs(void)
+static int __init init_clk_read_debugfs(void)
 {
 	/* Expose a simple debugfs interface to view all clocks */
 	(void) debugfs_create_file("u300_clocks", S_IFREG | S_IRUGO,
-				   NULL, NULL, &u300_clocks_operations);
-}
-#else
-static inline void init_clk_read_procfs(void)
-{
+				   NULL, NULL,
+				   &u300_clocks_operations);
+	return 0;
 }
+/*
+ * This needs to come in after the core_initcall() for the
+ * overall clocks, because debugfs is not available until
+ * the subsystems come up.
+ */
+module_init(init_clk_read_debugfs);
 #endif
 
 static int __init u300_clock_init(void)
@@ -1462,8 +1503,6 @@ static int __init u300_clock_init(void)
 
 	clk_register();
 
-	init_clk_read_procfs();
-
 	/*
 	 * Some of these may be on when we boot the system so make sure they
 	 * are turned OFF.
diff --git a/arch/arm/mach-u300/mmc.c b/arch/arm/mach-u300/mmc.c
index 3138d3955c9e..585cc013639d 100644
--- a/arch/arm/mach-u300/mmc.c
+++ b/arch/arm/mach-u300/mmc.c
@@ -156,6 +156,8 @@ int __devinit mmc_init(struct amba_device *adev)
 	mmci_card->mmc0_plat_data.ocr_mask = MMC_VDD_28_29;
 	mmci_card->mmc0_plat_data.translate_vdd = mmc_translate_vdd;
 	mmci_card->mmc0_plat_data.status = mmc_status;
+	mmci_card->mmc0_plat_data.gpio_wp = -1;
+	mmci_card->mmc0_plat_data.gpio_cd = -1;
 
 	mmcsd_device->platform_data = (void *) &mmci_card->mmc0_plat_data;
 
diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c
index 69214fc8bd19..afc0f87f3fa4 100644
--- a/arch/arm/mach-versatile/core.c
+++ b/arch/arm/mach-versatile/core.c
@@ -26,6 +26,7 @@
 #include <linux/interrupt.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/clcd.h>
+#include <linux/amba/pl061.h>
 #include <linux/clocksource.h>
 #include <linux/clockchips.h>
 #include <linux/cnt32_to_63.h>
@@ -372,6 +373,8 @@ unsigned int mmc_status(struct device *dev)
 static struct mmc_platform_data mmc0_plat_data = {
 	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
 	.status		= mmc_status,
+	.gpio_wp	= -1,
+	.gpio_cd	= -1,
 };
 
 /*
@@ -706,6 +709,16 @@ static struct clcd_board clcd_plat_data = {
 	.remove		= versatile_clcd_remove,
 };
 
+static struct pl061_platform_data gpio0_plat_data = {
+	.gpio_base	= 0,
+	.irq_base	= IRQ_GPIO0_START,
+};
+
+static struct pl061_platform_data gpio1_plat_data = {
+	.gpio_base	= 8,
+	.irq_base	= IRQ_GPIO1_START,
+};
+
 #define AACI_IRQ	{ IRQ_AACI, NO_IRQ }
 #define AACI_DMA	{ 0x80, 0x81 }
 #define MMCI0_IRQ	{ IRQ_MMCI0A,IRQ_SIC_MMCI0B }
@@ -768,8 +781,8 @@ AMBA_DEVICE(clcd,  "dev:20",  CLCD,     &clcd_plat_data);
 AMBA_DEVICE(dmac,  "dev:30",  DMAC,     NULL);
 AMBA_DEVICE(sctl,  "dev:e0",  SCTL,     NULL);
 AMBA_DEVICE(wdog,  "dev:e1",  WATCHDOG, NULL);
-AMBA_DEVICE(gpio0, "dev:e4",  GPIO0,    NULL);
-AMBA_DEVICE(gpio1, "dev:e5",  GPIO1,    NULL);
+AMBA_DEVICE(gpio0, "dev:e4",  GPIO0,    &gpio0_plat_data);
+AMBA_DEVICE(gpio1, "dev:e5",  GPIO1,    &gpio1_plat_data);
 AMBA_DEVICE(rtc,   "dev:e8",  RTC,      NULL);
 AMBA_DEVICE(sci0,  "dev:f0",  SCI,      NULL);
 AMBA_DEVICE(uart0, "dev:f1",  UART0,    NULL);
diff --git a/arch/arm/mach-versatile/include/mach/gpio.h b/arch/arm/mach-versatile/include/mach/gpio.h
new file mode 100644
index 000000000000..94ff27678a46
--- /dev/null
+++ b/arch/arm/mach-versatile/include/mach/gpio.h
@@ -0,0 +1,6 @@
+#include <asm-generic/gpio.h>
+
+#define gpio_get_value	__gpio_get_value
+#define gpio_set_value	__gpio_set_value
+#define gpio_cansleep	__gpio_cansleep
+#define gpio_to_irq	__gpio_to_irq
diff --git a/arch/arm/mach-versatile/include/mach/irqs.h b/arch/arm/mach-versatile/include/mach/irqs.h
index 9bfdb30e1f3f..bf44c61bd1f6 100644
--- a/arch/arm/mach-versatile/include/mach/irqs.h
+++ b/arch/arm/mach-versatile/include/mach/irqs.h
@@ -122,4 +122,13 @@
 #define IRQ_SIC_PCI3		(IRQ_SIC_START + SIC_INT_PCI3)
 #define IRQ_SIC_END		63
 
-#define NR_IRQS			64
+#define IRQ_GPIO0_START		(IRQ_SIC_END + 1)
+#define IRQ_GPIO0_END		(IRQ_GPIO0_START + 31)
+#define IRQ_GPIO1_START		(IRQ_GPIO0_END + 1)
+#define IRQ_GPIO1_END		(IRQ_GPIO1_START + 31)
+#define IRQ_GPIO2_START		(IRQ_GPIO1_END + 1)
+#define IRQ_GPIO2_END		(IRQ_GPIO2_START + 31)
+#define IRQ_GPIO3_START		(IRQ_GPIO2_END + 1)
+#define IRQ_GPIO3_END		(IRQ_GPIO3_START + 31)
+
+#define NR_IRQS			(IRQ_GPIO3_END + 1)
diff --git a/arch/arm/mach-versatile/versatile_pb.c b/arch/arm/mach-versatile/versatile_pb.c
index aa051c0884f8..9af8d8154df5 100644
--- a/arch/arm/mach-versatile/versatile_pb.c
+++ b/arch/arm/mach-versatile/versatile_pb.c
@@ -23,6 +23,7 @@
 #include <linux/device.h>
 #include <linux/sysdev.h>
 #include <linux/amba/bus.h>
+#include <linux/amba/pl061.h>
 #include <linux/io.h>
 
 #include <mach/hardware.h>
@@ -43,6 +44,18 @@
 static struct mmc_platform_data mmc1_plat_data = {
 	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
 	.status		= mmc_status,
+	.gpio_wp	= -1,
+	.gpio_cd	= -1,
+};
+
+static struct pl061_platform_data gpio2_plat_data = {
+	.gpio_base	= 16,
+	.irq_base	= IRQ_GPIO2_START,
+};
+
+static struct pl061_platform_data gpio3_plat_data = {
+	.gpio_base	= 24,
+	.irq_base	= IRQ_GPIO3_START,
 };
 
 #define UART3_IRQ	{ IRQ_SIC_UART3, NO_IRQ }
@@ -70,8 +83,8 @@ AMBA_DEVICE(sci1,  "fpga:0a", SCI1,     NULL);
 AMBA_DEVICE(mmc1,  "fpga:0b", MMCI1,    &mmc1_plat_data);
 
 /* DevChip Primecells */
-AMBA_DEVICE(gpio2, "dev:e6",  GPIO2,    NULL);
-AMBA_DEVICE(gpio3, "dev:e7",  GPIO3,    NULL);
+AMBA_DEVICE(gpio2, "dev:e6",  GPIO2,    &gpio2_plat_data);
+AMBA_DEVICE(gpio3, "dev:e7",  GPIO3,    &gpio3_plat_data);
 
 static struct amba_device *amba_devs[] __initdata = {
 	&uart3_device,
diff --git a/arch/arm/mach-w90x900/Kconfig b/arch/arm/mach-w90x900/Kconfig
index 8e4178fe5ec2..69bab32a8bc2 100644
--- a/arch/arm/mach-w90x900/Kconfig
+++ b/arch/arm/mach-w90x900/Kconfig
@@ -5,6 +5,16 @@ config CPU_W90P910
 	help
 	  Support for W90P910 of Nuvoton W90X900 CPUs.
 
+config CPU_NUC950
+	bool
+	help
+	  Support for NUCP950 of Nuvoton NUC900 CPUs.
+
+config CPU_NUC960
+	bool
+	help
+	  Support for NUCP960 of Nuvoton NUC900 CPUs.
+
 menu "W90P910 Machines"
 
 config MACH_W90P910EVB
@@ -16,4 +26,24 @@ config MACH_W90P910EVB
 
 endmenu
 
+menu "NUC950 Machines"
+
+config MACH_W90P950EVB
+	bool "Nuvoton NUC950 Evaluation Board"
+	select CPU_NUC950
+	help
+	   Say Y here if you are using the Nuvoton NUC950EVB
+
+endmenu
+
+menu "NUC960 Machines"
+
+config MACH_W90N960EVB
+	bool "Nuvoton NUC960 Evaluation Board"
+	select CPU_NUC960
+	help
+	   Say Y here if you are using the Nuvoton NUC960EVB
+
+endmenu
+
 endif
diff --git a/arch/arm/mach-w90x900/Makefile b/arch/arm/mach-w90x900/Makefile
index d50c94f4dbdf..828c0326441e 100644
--- a/arch/arm/mach-w90x900/Makefile
+++ b/arch/arm/mach-w90x900/Makefile
@@ -4,12 +4,16 @@
 
 # Object file lists.
 
-obj-y				:= irq.o time.o mfp-w90p910.o gpio.o clock.o
-
+obj-y				:= irq.o time.o mfp.o gpio.o clock.o
+obj-y				+= clksel.o dev.o cpu.o
 # W90X900 CPU support files
 
-obj-$(CONFIG_CPU_W90P910)	+= w90p910.o
+obj-$(CONFIG_CPU_W90P910)	+= nuc910.o
+obj-$(CONFIG_CPU_NUC950)	+= nuc950.o
+obj-$(CONFIG_CPU_NUC960)	+= nuc960.o
 
 # machine support
 
-obj-$(CONFIG_MACH_W90P910EVB)	+= mach-w90p910evb.o
+obj-$(CONFIG_MACH_W90P910EVB)	+= mach-nuc910evb.o
+obj-$(CONFIG_MACH_W90P950EVB)	+= mach-nuc950evb.o
+obj-$(CONFIG_MACH_W90N960EVB)	+= mach-nuc960evb.o
diff --git a/arch/arm/mach-w90x900/clksel.c b/arch/arm/mach-w90x900/clksel.c
new file mode 100644
index 000000000000..3de4a5211c3b
--- /dev/null
+++ b/arch/arm/mach-w90x900/clksel.c
@@ -0,0 +1,91 @@
+/*
+ * linux/arch/arm/mach-w90x900/clksel.c
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/string.h>
+#include <linux/clk.h>
+#include <linux/mutex.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <mach/regs-clock.h>
+
+#define PLL0		0x00
+#define PLL1		0x01
+#define OTHER		0x02
+#define EXT		0x03
+#define MSOFFSET	0x0C
+#define ATAOFFSET	0x0a
+#define LCDOFFSET	0x06
+#define AUDOFFSET	0x04
+#define CPUOFFSET	0x00
+
+static DEFINE_MUTEX(clksel_sem);
+
+static void clock_source_select(const char *dev_id, unsigned int clkval)
+{
+	unsigned int clksel, offset;
+
+	clksel = __raw_readl(REG_CLKSEL);
+
+	if (strcmp(dev_id, "nuc900-ms") == 0)
+		offset = MSOFFSET;
+	else if (strcmp(dev_id, "nuc900-atapi") == 0)
+		offset = ATAOFFSET;
+	else if (strcmp(dev_id, "nuc900-lcd") == 0)
+		offset = LCDOFFSET;
+	else if (strcmp(dev_id, "nuc900-audio") == 0)
+		offset = AUDOFFSET;
+	else
+		offset = CPUOFFSET;
+
+	clksel &= ~(0x03 << offset);
+	clksel |= (clkval << offset);
+
+	__raw_writel(clksel, REG_CLKSEL);
+}
+
+void nuc900_clock_source(struct device *dev, unsigned char *src)
+{
+	unsigned int clkval;
+	const char *dev_id;
+
+	BUG_ON(!src);
+	clkval = 0;
+
+	mutex_lock(&clksel_sem);
+
+	if (dev)
+		dev_id = dev_name(dev);
+	else
+		dev_id = "cpufreq";
+
+	if (strcmp(src, "pll0") == 0)
+		clkval = PLL0;
+	else if (strcmp(src, "pll1") == 0)
+		clkval = PLL1;
+	else if (strcmp(src, "ext") == 0)
+		clkval = EXT;
+	else if (strcmp(src, "oth") == 0)
+		clkval = OTHER;
+
+	clock_source_select(dev_id, clkval);
+
+	mutex_unlock(&clksel_sem);
+}
+EXPORT_SYMBOL(nuc900_clock_source);
+
diff --git a/arch/arm/mach-w90x900/clock.c b/arch/arm/mach-w90x900/clock.c
index f420613cd395..b785994bab0a 100644
--- a/arch/arm/mach-w90x900/clock.c
+++ b/arch/arm/mach-w90x900/clock.c
@@ -25,6 +25,8 @@
 
 #include "clock.h"
 
+#define SUBCLK 0x24
+
 static DEFINE_SPINLOCK(clocks_lock);
 
 int clk_enable(struct clk *clk)
@@ -53,7 +55,13 @@ void clk_disable(struct clk *clk)
 }
 EXPORT_SYMBOL(clk_disable);
 
-void w90x900_clk_enable(struct clk *clk, int enable)
+unsigned long clk_get_rate(struct clk *clk)
+{
+	return 15000000;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+void nuc900_clk_enable(struct clk *clk, int enable)
 {
 	unsigned int clocks = clk->cken;
 	unsigned long clken;
@@ -68,6 +76,22 @@ void w90x900_clk_enable(struct clk *clk, int enable)
 	__raw_writel(clken, W90X900_VA_CLKPWR);
 }
 
+void nuc900_subclk_enable(struct clk *clk, int enable)
+{
+	unsigned int clocks = clk->cken;
+	unsigned long clken;
+
+	clken = __raw_readl(W90X900_VA_CLKPWR + SUBCLK);
+
+	if (enable)
+		clken |= clocks;
+	else
+		clken &= ~clocks;
+
+	__raw_writel(clken, W90X900_VA_CLKPWR + SUBCLK);
+}
+
+
 void clks_register(struct clk_lookup *clks, size_t num)
 {
 	int i;
diff --git a/arch/arm/mach-w90x900/clock.h b/arch/arm/mach-w90x900/clock.h
index 4f27bda76d56..f5816a06eed6 100644
--- a/arch/arm/mach-w90x900/clock.h
+++ b/arch/arm/mach-w90x900/clock.h
@@ -12,7 +12,8 @@
 
 #include <asm/clkdev.h>
 
-void w90x900_clk_enable(struct clk *clk, int enable);
+void nuc900_clk_enable(struct clk *clk, int enable);
+void nuc900_subclk_enable(struct clk *clk, int enable);
 void clks_register(struct clk_lookup *clks, size_t num);
 
 struct clk {
@@ -23,10 +24,17 @@ struct clk {
 
 #define DEFINE_CLK(_name, _ctrlbit)			\
 struct clk clk_##_name = {				\
-		.enable	= w90x900_clk_enable,		\
+		.enable	= nuc900_clk_enable,		\
 		.cken	= (1 << _ctrlbit),		\
 	}
 
+#define DEFINE_SUBCLK(_name, _ctrlbit)			\
+struct clk clk_##_name = {				\
+		.enable	= nuc900_subclk_enable,	\
+		.cken	= (1 << _ctrlbit),		\
+	}
+
+
 #define DEF_CLKLOOK(_clk, _devname, _conname)		\
 	{						\
 		.clk		= _clk,			\
diff --git a/arch/arm/mach-w90x900/cpu.c b/arch/arm/mach-w90x900/cpu.c
new file mode 100644
index 000000000000..921cef991bf0
--- /dev/null
+++ b/arch/arm/mach-w90x900/cpu.c
@@ -0,0 +1,212 @@
+/*
+ * linux/arch/arm/mach-w90x900/cpu.c
+ *
+ * Copyright (c) 2009 Nuvoton corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * NUC900 series cpu common support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/serial_8250.h>
+#include <linux/delay.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+#include <asm/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/regs-serial.h>
+#include <mach/regs-clock.h>
+#include <mach/regs-ebi.h>
+
+#include "cpu.h"
+#include "clock.h"
+
+/* Initial IO mappings */
+
+static struct map_desc nuc900_iodesc[] __initdata = {
+	IODESC_ENT(IRQ),
+	IODESC_ENT(GCR),
+	IODESC_ENT(UART),
+	IODESC_ENT(TIMER),
+	IODESC_ENT(EBI),
+};
+
+/* Initial clock declarations. */
+static DEFINE_CLK(lcd, 0);
+static DEFINE_CLK(audio, 1);
+static DEFINE_CLK(fmi, 4);
+static DEFINE_SUBCLK(ms, 0);
+static DEFINE_SUBCLK(sd, 1);
+static DEFINE_CLK(dmac, 5);
+static DEFINE_CLK(atapi, 6);
+static DEFINE_CLK(emc, 7);
+static DEFINE_SUBCLK(rmii, 2);
+static DEFINE_CLK(usbd, 8);
+static DEFINE_CLK(usbh, 9);
+static DEFINE_CLK(g2d, 10);;
+static DEFINE_CLK(pwm, 18);
+static DEFINE_CLK(ps2, 24);
+static DEFINE_CLK(kpi, 25);
+static DEFINE_CLK(wdt, 26);
+static DEFINE_CLK(gdma, 27);
+static DEFINE_CLK(adc, 28);
+static DEFINE_CLK(usi, 29);
+static DEFINE_CLK(ext, 0);
+
+static struct clk_lookup nuc900_clkregs[] = {
+	DEF_CLKLOOK(&clk_lcd, "nuc900-lcd", NULL),
+	DEF_CLKLOOK(&clk_audio, "nuc900-audio", NULL),
+	DEF_CLKLOOK(&clk_fmi, "nuc900-fmi", NULL),
+	DEF_CLKLOOK(&clk_ms, "nuc900-fmi", "MS"),
+	DEF_CLKLOOK(&clk_sd, "nuc900-fmi", "SD"),
+	DEF_CLKLOOK(&clk_dmac, "nuc900-dmac", NULL),
+	DEF_CLKLOOK(&clk_atapi, "nuc900-atapi", NULL),
+	DEF_CLKLOOK(&clk_emc, "nuc900-emc", NULL),
+	DEF_CLKLOOK(&clk_rmii, "nuc900-emc", "RMII"),
+	DEF_CLKLOOK(&clk_usbd, "nuc900-usbd", NULL),
+	DEF_CLKLOOK(&clk_usbh, "nuc900-usbh", NULL),
+	DEF_CLKLOOK(&clk_g2d, "nuc900-g2d", NULL),
+	DEF_CLKLOOK(&clk_pwm, "nuc900-pwm", NULL),
+	DEF_CLKLOOK(&clk_ps2, "nuc900-ps2", NULL),
+	DEF_CLKLOOK(&clk_kpi, "nuc900-kpi", NULL),
+	DEF_CLKLOOK(&clk_wdt, "nuc900-wdt", NULL),
+	DEF_CLKLOOK(&clk_gdma, "nuc900-gdma", NULL),
+	DEF_CLKLOOK(&clk_adc, "nuc900-adc", NULL),
+	DEF_CLKLOOK(&clk_usi, "nuc900-spi", NULL),
+	DEF_CLKLOOK(&clk_ext, NULL, "ext"),
+};
+
+/* Initial serial platform data */
+
+struct plat_serial8250_port nuc900_uart_data[] = {
+	NUC900_8250PORT(UART0),
+};
+
+struct platform_device nuc900_serial_device = {
+	.name			= "serial8250",
+	.id			= PLAT8250_DEV_PLATFORM,
+	.dev			= {
+		.platform_data	= nuc900_uart_data,
+	},
+};
+
+/*Set NUC900 series cpu frequence*/
+static int __init nuc900_set_clkval(unsigned int cpufreq)
+{
+	unsigned int pllclk, ahbclk, apbclk, val;
+
+	pllclk = 0;
+	ahbclk = 0;
+	apbclk = 0;
+
+	switch (cpufreq) {
+	case 66:
+		pllclk = PLL_66MHZ;
+		ahbclk = AHB_CPUCLK_1_1;
+		apbclk = APB_AHB_1_2;
+		break;
+
+	case 100:
+		pllclk = PLL_100MHZ;
+		ahbclk = AHB_CPUCLK_1_1;
+		apbclk = APB_AHB_1_2;
+		break;
+
+	case 120:
+		pllclk = PLL_120MHZ;
+		ahbclk = AHB_CPUCLK_1_2;
+		apbclk = APB_AHB_1_2;
+		break;
+
+	case 166:
+		pllclk = PLL_166MHZ;
+		ahbclk = AHB_CPUCLK_1_2;
+		apbclk = APB_AHB_1_2;
+		break;
+
+	case 200:
+		pllclk = PLL_200MHZ;
+		ahbclk = AHB_CPUCLK_1_2;
+		apbclk = APB_AHB_1_2;
+		break;
+	}
+
+	__raw_writel(pllclk, REG_PLLCON0);
+
+	val = __raw_readl(REG_CLKDIV);
+	val &= ~(0x03 << 24 | 0x03 << 26);
+	val |= (ahbclk << 24 | apbclk << 26);
+	__raw_writel(val, REG_CLKDIV);
+
+	return 	0;
+}
+static int __init nuc900_set_cpufreq(char *str)
+{
+	unsigned long cpufreq, val;
+
+	if (!*str)
+		return 0;
+
+	strict_strtoul(str, 0, &cpufreq);
+
+	nuc900_clock_source(NULL, "ext");
+
+	nuc900_set_clkval(cpufreq);
+
+	mdelay(1);
+
+	val = __raw_readl(REG_CKSKEW);
+	val &= ~0xff;
+	val |= DEFAULTSKEW;
+	__raw_writel(val, REG_CKSKEW);
+
+	nuc900_clock_source(NULL, "pll0");
+
+	return 1;
+}
+
+__setup("cpufreq=", nuc900_set_cpufreq);
+
+/*Init NUC900 evb io*/
+
+void __init nuc900_map_io(struct map_desc *mach_desc, int mach_size)
+{
+	unsigned long idcode = 0x0;
+
+	iotable_init(mach_desc, mach_size);
+	iotable_init(nuc900_iodesc, ARRAY_SIZE(nuc900_iodesc));
+
+	idcode = __raw_readl(NUC900PDID);
+	if (idcode == NUC910_CPUID)
+		printk(KERN_INFO "CPU type 0x%08lx is NUC910\n", idcode);
+	else if (idcode == NUC920_CPUID)
+		printk(KERN_INFO "CPU type 0x%08lx is NUC920\n", idcode);
+	else if (idcode == NUC950_CPUID)
+		printk(KERN_INFO "CPU type 0x%08lx is NUC950\n", idcode);
+	else if (idcode == NUC960_CPUID)
+		printk(KERN_INFO "CPU type 0x%08lx is NUC960\n", idcode);
+}
+
+/*Init NUC900 clock*/
+
+void __init nuc900_init_clocks(void)
+{
+	clks_register(nuc900_clkregs, ARRAY_SIZE(nuc900_clkregs));
+}
+
diff --git a/arch/arm/mach-w90x900/cpu.h b/arch/arm/mach-w90x900/cpu.h
index 57b5dbabeb41..4d58ba164e25 100644
--- a/arch/arm/mach-w90x900/cpu.h
+++ b/arch/arm/mach-w90x900/cpu.h
@@ -6,7 +6,7 @@
  * Copyright (c) 2008 Nuvoton technology corporation
  * All rights reserved.
  *
- * Header file for W90X900 CPU support
+ * Header file for NUC900 CPU support
  *
  * Wan ZongShun <mcuos.com@gmail.com>
  *
@@ -24,29 +24,7 @@
        .type    = MT_DEVICE,                           \
 }
 
-/*Cpu identifier register*/
-
-#define W90X900PDID	W90X900_VA_GCR
-#define W90P910_CPUID	0x02900910
-#define W90P920_CPUID	0x02900920
-#define W90P950_CPUID	0x02900950
-#define W90N960_CPUID	0x02900960
-
-struct w90x900_uartcfg;
-struct map_desc;
-struct sys_timer;
-
-/* core initialisation functions */
-
-extern void w90x900_init_irq(void);
-extern void w90p910_init_io(struct map_desc *mach_desc, int size);
-extern void w90p910_init_uarts(struct w90x900_uartcfg *cfg, int no);
-extern void w90p910_init_clocks(void);
-extern void w90p910_map_io(struct map_desc *mach_desc, int size);
-extern struct platform_device w90p910_serial_device;
-extern struct sys_timer w90x900_timer;
-
-#define W90X900_8250PORT(name)					\
+#define NUC900_8250PORT(name)					\
 {								\
 	.membase	= name##_BA,				\
 	.mapbase	= name##_PA,				\
@@ -56,3 +34,26 @@ extern struct sys_timer w90x900_timer;
 	.iotype		= UPIO_MEM,				\
 	.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,	\
 }
+
+/*Cpu identifier register*/
+
+#define NUC900PDID	W90X900_VA_GCR
+#define NUC910_CPUID	0x02900910
+#define NUC920_CPUID	0x02900920
+#define NUC950_CPUID	0x02900950
+#define NUC960_CPUID	0x02900960
+
+/* extern file from cpu.c */
+
+extern void nuc900_clock_source(struct device *dev, unsigned char *src);
+extern void nuc900_init_clocks(void);
+extern void nuc900_map_io(struct map_desc *mach_desc, int mach_size);
+extern void nuc900_board_init(struct platform_device **device, int size);
+
+/* for either public between 910 and 920, or between 920 and 950 */
+
+extern struct platform_device nuc900_serial_device;
+extern struct platform_device nuc900_device_fmi;
+extern struct platform_device nuc900_device_kpi;
+extern struct platform_device nuc900_device_rtc;
+extern struct platform_device nuc900_device_ts;
diff --git a/arch/arm/mach-w90x900/dev.c b/arch/arm/mach-w90x900/dev.c
new file mode 100644
index 000000000000..2a6f98de48d2
--- /dev/null
+++ b/arch/arm/mach-w90x900/dev.c
@@ -0,0 +1,389 @@
+/*
+ * linux/arch/arm/mach-w90x900/dev.c
+ *
+ * Copyright (C) 2009 Nuvoton corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+#include <asm/mach-types.h>
+
+#include <mach/regs-serial.h>
+#include <mach/map.h>
+
+#include "cpu.h"
+
+/*NUC900 evb norflash driver data */
+
+#define NUC900_FLASH_BASE	0xA0000000
+#define NUC900_FLASH_SIZE	0x400000
+#define SPIOFFSET		0x200
+#define SPIOREG_SIZE		0x100
+
+static struct mtd_partition nuc900_flash_partitions[] = {
+	{
+		.name	=	"NOR Partition 1 for kernel (960K)",
+		.size	=	0xF0000,
+		.offset	=	0x10000,
+	},
+	{
+		.name	=	"NOR Partition 2 for image (1M)",
+		.size	=	0x100000,
+		.offset	=	0x100000,
+	},
+	{
+		.name	=	"NOR Partition 3 for user (2M)",
+		.size	=	0x200000,
+		.offset	=	0x00200000,
+	}
+};
+
+static struct physmap_flash_data nuc900_flash_data = {
+	.width		=	2,
+	.parts		=	nuc900_flash_partitions,
+	.nr_parts	=	ARRAY_SIZE(nuc900_flash_partitions),
+};
+
+static struct resource nuc900_flash_resources[] = {
+	{
+		.start	=	NUC900_FLASH_BASE,
+		.end	=	NUC900_FLASH_BASE + NUC900_FLASH_SIZE - 1,
+		.flags	=	IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device nuc900_flash_device = {
+	.name		=	"physmap-flash",
+	.id		=	0,
+	.dev		= {
+				.platform_data = &nuc900_flash_data,
+			},
+	.resource	=	nuc900_flash_resources,
+	.num_resources	=	ARRAY_SIZE(nuc900_flash_resources),
+};
+
+/* USB EHCI Host Controller */
+
+static struct resource nuc900_usb_ehci_resource[] = {
+	[0] = {
+		.start = W90X900_PA_USBEHCIHOST,
+		.end   = W90X900_PA_USBEHCIHOST + W90X900_SZ_USBEHCIHOST - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_USBH,
+		.end   = IRQ_USBH,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+static u64 nuc900_device_usb_ehci_dmamask = 0xffffffffUL;
+
+static struct platform_device nuc900_device_usb_ehci = {
+	.name		  = "nuc900-ehci",
+	.id		  = -1,
+	.num_resources	  = ARRAY_SIZE(nuc900_usb_ehci_resource),
+	.resource	  = nuc900_usb_ehci_resource,
+	.dev              = {
+		.dma_mask = &nuc900_device_usb_ehci_dmamask,
+		.coherent_dma_mask = 0xffffffffUL
+	}
+};
+
+/* USB OHCI Host Controller */
+
+static struct resource nuc900_usb_ohci_resource[] = {
+	[0] = {
+		.start = W90X900_PA_USBOHCIHOST,
+		.end   = W90X900_PA_USBOHCIHOST + W90X900_SZ_USBOHCIHOST - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_USBH,
+		.end   = IRQ_USBH,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+static u64 nuc900_device_usb_ohci_dmamask = 0xffffffffUL;
+static struct platform_device nuc900_device_usb_ohci = {
+	.name		  = "nuc900-ohci",
+	.id		  = -1,
+	.num_resources	  = ARRAY_SIZE(nuc900_usb_ohci_resource),
+	.resource	  = nuc900_usb_ohci_resource,
+	.dev              = {
+		.dma_mask = &nuc900_device_usb_ohci_dmamask,
+		.coherent_dma_mask = 0xffffffffUL
+	}
+};
+
+/* USB Device (Gadget)*/
+
+static struct resource nuc900_usbgadget_resource[] = {
+	[0] = {
+		.start = W90X900_PA_USBDEV,
+		.end   = W90X900_PA_USBDEV + W90X900_SZ_USBDEV - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_USBD,
+		.end   = IRQ_USBD,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device nuc900_device_usbgadget = {
+	.name		= "nuc900-usbgadget",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(nuc900_usbgadget_resource),
+	.resource	= nuc900_usbgadget_resource,
+};
+
+/* MAC device */
+
+static struct resource nuc900_emc_resource[] = {
+	[0] = {
+		.start = W90X900_PA_EMC,
+		.end   = W90X900_PA_EMC + W90X900_SZ_EMC - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_EMCTX,
+		.end   = IRQ_EMCTX,
+		.flags = IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start = IRQ_EMCRX,
+		.end   = IRQ_EMCRX,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+static u64 nuc900_device_emc_dmamask = 0xffffffffUL;
+static struct platform_device nuc900_device_emc = {
+	.name		= "nuc900-emc",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(nuc900_emc_resource),
+	.resource	= nuc900_emc_resource,
+	.dev              = {
+		.dma_mask = &nuc900_device_emc_dmamask,
+		.coherent_dma_mask = 0xffffffffUL
+	}
+};
+
+/* SPI device */
+
+static struct resource nuc900_spi_resource[] = {
+	[0] = {
+		.start = W90X900_PA_I2C + SPIOFFSET,
+		.end   = W90X900_PA_I2C + SPIOFFSET + SPIOREG_SIZE - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_SSP,
+		.end   = IRQ_SSP,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device nuc900_device_spi = {
+	.name		= "nuc900-spi",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(nuc900_spi_resource),
+	.resource	= nuc900_spi_resource,
+};
+
+/* spi device, spi flash info */
+
+static struct mtd_partition nuc900_spi_flash_partitions[] = {
+	{
+		.name = "bootloader(spi)",
+		.size = 0x0100000,
+		.offset = 0,
+	},
+};
+
+static struct flash_platform_data nuc900_spi_flash_data = {
+	.name = "m25p80",
+	.parts =  nuc900_spi_flash_partitions,
+	.nr_parts = ARRAY_SIZE(nuc900_spi_flash_partitions),
+	.type = "w25x16",
+};
+
+static struct spi_board_info nuc900_spi_board_info[] __initdata = {
+	{
+		.modalias = "m25p80",
+		.max_speed_hz = 20000000,
+		.bus_num = 0,
+		.chip_select = 1,
+		.platform_data = &nuc900_spi_flash_data,
+		.mode = SPI_MODE_0,
+	},
+};
+
+/* WDT Device */
+
+static struct resource nuc900_wdt_resource[] = {
+	[0] = {
+		.start = W90X900_PA_TIMER,
+		.end   = W90X900_PA_TIMER + W90X900_SZ_TIMER - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_WDT,
+		.end   = IRQ_WDT,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device nuc900_device_wdt = {
+	.name		= "nuc900-wdt",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(nuc900_wdt_resource),
+	.resource	= nuc900_wdt_resource,
+};
+
+/*
+ * public device definition between 910 and 920, or 910
+ * and 950 or 950 and 960...,their dev platform register
+ * should be in specific file such as nuc950, nuc960 c
+ * files rather than the public dev.c file here. so the
+ * corresponding platform_device definition should not be
+ * static.
+*/
+
+/* RTC controller*/
+
+static struct resource nuc900_rtc_resource[] = {
+	[0] = {
+		.start = W90X900_PA_RTC,
+		.end   = W90X900_PA_RTC + 0xff,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_RTC,
+		.end   = IRQ_RTC,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device nuc900_device_rtc = {
+	.name		= "nuc900-rtc",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(nuc900_rtc_resource),
+	.resource	= nuc900_rtc_resource,
+};
+
+/*TouchScreen controller*/
+
+static struct resource nuc900_ts_resource[] = {
+	[0] = {
+		.start = W90X900_PA_ADC,
+		.end   = W90X900_PA_ADC + W90X900_SZ_ADC-1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_ADC,
+		.end   = IRQ_ADC,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device nuc900_device_ts = {
+	.name		= "nuc900-ts",
+	.id		= -1,
+	.resource	= nuc900_ts_resource,
+	.num_resources	= ARRAY_SIZE(nuc900_ts_resource),
+};
+
+/* FMI Device */
+
+static struct resource nuc900_fmi_resource[] = {
+	[0] = {
+		.start = W90X900_PA_FMI,
+		.end   = W90X900_PA_FMI + W90X900_SZ_FMI - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_FMI,
+		.end   = IRQ_FMI,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+struct platform_device nuc900_device_fmi = {
+	.name		= "nuc900-fmi",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(nuc900_fmi_resource),
+	.resource	= nuc900_fmi_resource,
+};
+
+/* KPI controller*/
+
+static struct resource nuc900_kpi_resource[] = {
+	[0] = {
+		.start = W90X900_PA_KPI,
+		.end   = W90X900_PA_KPI + W90X900_SZ_KPI - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_KPI,
+		.end   = IRQ_KPI,
+		.flags = IORESOURCE_IRQ,
+	}
+
+};
+
+struct platform_device nuc900_device_kpi = {
+	.name		= "nuc900-kpi",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(nuc900_kpi_resource),
+	.resource	= nuc900_kpi_resource,
+};
+
+/*Here should be your evb resourse,such as LCD*/
+
+static struct platform_device *nuc900_public_dev[] __initdata = {
+	&nuc900_serial_device,
+	&nuc900_flash_device,
+	&nuc900_device_usb_ehci,
+	&nuc900_device_usb_ohci,
+	&nuc900_device_usbgadget,
+	&nuc900_device_emc,
+	&nuc900_device_spi,
+	&nuc900_device_wdt,
+};
+
+/* Provide adding specific CPU platform devices API */
+
+void __init nuc900_board_init(struct platform_device **device, int size)
+{
+	platform_add_devices(device, size);
+	platform_add_devices(nuc900_public_dev, ARRAY_SIZE(nuc900_public_dev));
+	spi_register_board_info(nuc900_spi_board_info,
+					ARRAY_SIZE(nuc900_spi_board_info));
+}
+
diff --git a/arch/arm/mach-w90x900/gpio.c b/arch/arm/mach-w90x900/gpio.c
index c72e0dfa1825..ba05aec7ea4b 100644
--- a/arch/arm/mach-w90x900/gpio.c
+++ b/arch/arm/mach-w90x900/gpio.c
@@ -1,7 +1,7 @@
 /*
- * linux/arch/arm/mach-w90p910/gpio.c
+ * linux/arch/arm/mach-w90x900/gpio.c
  *
- * Generic w90p910 GPIO handling
+ * Generic nuc900 GPIO handling
  *
  *  Wan ZongShun <mcuos.com@gmail.com>
  *
@@ -30,31 +30,31 @@
 #define GPIO_IN			(0x0C)
 #define GROUPINERV		(0x10)
 #define GPIO_GPIO(Nb)		(0x00000001 << (Nb))
-#define to_w90p910_gpio_chip(c) container_of(c, struct w90p910_gpio_chip, chip)
+#define to_nuc900_gpio_chip(c) container_of(c, struct nuc900_gpio_chip, chip)
 
-#define W90P910_GPIO_CHIP(name, base_gpio, nr_gpio)			\
+#define NUC900_GPIO_CHIP(name, base_gpio, nr_gpio)			\
 	{								\
 		.chip = {						\
 			.label		  = name,			\
-			.direction_input  = w90p910_dir_input,		\
-			.direction_output = w90p910_dir_output,		\
-			.get		  = w90p910_gpio_get,		\
-			.set		  = w90p910_gpio_set,		\
+			.direction_input  = nuc900_dir_input,		\
+			.direction_output = nuc900_dir_output,		\
+			.get		  = nuc900_gpio_get,		\
+			.set		  = nuc900_gpio_set,		\
 			.base		  = base_gpio,			\
 			.ngpio		  = nr_gpio,			\
 		}							\
 	}
 
-struct w90p910_gpio_chip {
+struct nuc900_gpio_chip {
 	struct gpio_chip	chip;
 	void __iomem		*regbase;	/* Base of group register*/
 	spinlock_t 		gpio_lock;
 };
 
-static int w90p910_gpio_get(struct gpio_chip *chip, unsigned offset)
+static int nuc900_gpio_get(struct gpio_chip *chip, unsigned offset)
 {
-	struct w90p910_gpio_chip *w90p910_gpio = to_w90p910_gpio_chip(chip);
-	void __iomem *pio = w90p910_gpio->regbase + GPIO_IN;
+	struct nuc900_gpio_chip *nuc900_gpio = to_nuc900_gpio_chip(chip);
+	void __iomem *pio = nuc900_gpio->regbase + GPIO_IN;
 	unsigned int regval;
 
 	regval = __raw_readl(pio);
@@ -63,14 +63,14 @@ static int w90p910_gpio_get(struct gpio_chip *chip, unsigned offset)
 	return (regval != 0);
 }
 
-static void w90p910_gpio_set(struct gpio_chip *chip, unsigned offset, int val)
+static void nuc900_gpio_set(struct gpio_chip *chip, unsigned offset, int val)
 {
-	struct w90p910_gpio_chip *w90p910_gpio = to_w90p910_gpio_chip(chip);
-	void __iomem *pio = w90p910_gpio->regbase + GPIO_OUT;
+	struct nuc900_gpio_chip *nuc900_gpio = to_nuc900_gpio_chip(chip);
+	void __iomem *pio = nuc900_gpio->regbase + GPIO_OUT;
 	unsigned int regval;
 	unsigned long flags;
 
-	spin_lock_irqsave(&w90p910_gpio->gpio_lock, flags);
+	spin_lock_irqsave(&nuc900_gpio->gpio_lock, flags);
 
 	regval = __raw_readl(pio);
 
@@ -81,36 +81,36 @@ static void w90p910_gpio_set(struct gpio_chip *chip, unsigned offset, int val)
 
 	__raw_writel(regval, pio);
 
-	spin_unlock_irqrestore(&w90p910_gpio->gpio_lock, flags);
+	spin_unlock_irqrestore(&nuc900_gpio->gpio_lock, flags);
 }
 
-static int w90p910_dir_input(struct gpio_chip *chip, unsigned offset)
+static int nuc900_dir_input(struct gpio_chip *chip, unsigned offset)
 {
-	struct w90p910_gpio_chip *w90p910_gpio = to_w90p910_gpio_chip(chip);
-	void __iomem *pio = w90p910_gpio->regbase + GPIO_DIR;
+	struct nuc900_gpio_chip *nuc900_gpio = to_nuc900_gpio_chip(chip);
+	void __iomem *pio = nuc900_gpio->regbase + GPIO_DIR;
 	unsigned int regval;
 	unsigned long flags;
 
-	spin_lock_irqsave(&w90p910_gpio->gpio_lock, flags);
+	spin_lock_irqsave(&nuc900_gpio->gpio_lock, flags);
 
 	regval = __raw_readl(pio);
 	regval &= ~GPIO_GPIO(offset);
 	__raw_writel(regval, pio);
 
-	spin_unlock_irqrestore(&w90p910_gpio->gpio_lock, flags);
+	spin_unlock_irqrestore(&nuc900_gpio->gpio_lock, flags);
 
 	return 0;
 }
 
-static int w90p910_dir_output(struct gpio_chip *chip, unsigned offset, int val)
+static int nuc900_dir_output(struct gpio_chip *chip, unsigned offset, int val)
 {
-	struct w90p910_gpio_chip *w90p910_gpio = to_w90p910_gpio_chip(chip);
-	void __iomem *outreg = w90p910_gpio->regbase + GPIO_OUT;
-	void __iomem *pio = w90p910_gpio->regbase + GPIO_DIR;
+	struct nuc900_gpio_chip *nuc900_gpio = to_nuc900_gpio_chip(chip);
+	void __iomem *outreg = nuc900_gpio->regbase + GPIO_OUT;
+	void __iomem *pio = nuc900_gpio->regbase + GPIO_DIR;
 	unsigned int regval;
 	unsigned long flags;
 
-	spin_lock_irqsave(&w90p910_gpio->gpio_lock, flags);
+	spin_lock_irqsave(&nuc900_gpio->gpio_lock, flags);
 
 	regval = __raw_readl(pio);
 	regval |= GPIO_GPIO(offset);
@@ -125,28 +125,28 @@ static int w90p910_dir_output(struct gpio_chip *chip, unsigned offset, int val)
 
 	__raw_writel(regval, outreg);
 
-	spin_unlock_irqrestore(&w90p910_gpio->gpio_lock, flags);
+	spin_unlock_irqrestore(&nuc900_gpio->gpio_lock, flags);
 
 	return 0;
 }
 
-static struct w90p910_gpio_chip w90p910_gpio[] = {
-	W90P910_GPIO_CHIP("GROUPC", 0, 16),
-	W90P910_GPIO_CHIP("GROUPD", 16, 10),
-	W90P910_GPIO_CHIP("GROUPE", 26, 14),
-	W90P910_GPIO_CHIP("GROUPF", 40, 10),
-	W90P910_GPIO_CHIP("GROUPG", 50, 17),
-	W90P910_GPIO_CHIP("GROUPH", 67, 8),
-	W90P910_GPIO_CHIP("GROUPI", 75, 17),
+static struct nuc900_gpio_chip nuc900_gpio[] = {
+	NUC900_GPIO_CHIP("GROUPC", 0, 16),
+	NUC900_GPIO_CHIP("GROUPD", 16, 10),
+	NUC900_GPIO_CHIP("GROUPE", 26, 14),
+	NUC900_GPIO_CHIP("GROUPF", 40, 10),
+	NUC900_GPIO_CHIP("GROUPG", 50, 17),
+	NUC900_GPIO_CHIP("GROUPH", 67, 8),
+	NUC900_GPIO_CHIP("GROUPI", 75, 17),
 };
 
-void __init w90p910_init_gpio(int nr_group)
+void __init nuc900_init_gpio(int nr_group)
 {
 	unsigned	i;
-	struct w90p910_gpio_chip *gpio_chip;
+	struct nuc900_gpio_chip *gpio_chip;
 
 	for (i = 0; i < nr_group; i++) {
-		gpio_chip = &w90p910_gpio[i];
+		gpio_chip = &nuc900_gpio[i];
 		spin_lock_init(&gpio_chip->gpio_lock);
 		gpio_chip->regbase = GPIO_BASE + i * GROUPINERV;
 		gpiochip_add(&gpio_chip->chip);
diff --git a/arch/arm/mach-w90x900/include/mach/regs-clock.h b/arch/arm/mach-w90x900/include/mach/regs-clock.h
index f10b6a8dc069..516d6b477b61 100644
--- a/arch/arm/mach-w90x900/include/mach/regs-clock.h
+++ b/arch/arm/mach-w90x900/include/mach/regs-clock.h
@@ -28,4 +28,26 @@
 #define REG_CLKEN1	(CLK_BA + 0x24)
 #define REG_CLKDIV1	(CLK_BA + 0x28)
 
+/* Define PLL freq setting */
+#define PLL_DISABLE		0x12B63
+#define	PLL_66MHZ		0x2B63
+#define	PLL_100MHZ		0x4F64
+#define PLL_120MHZ		0x4F63
+#define	PLL_166MHZ		0x4124
+#define	PLL_200MHZ		0x4F24
+
+/* Define AHB:CPUFREQ ratio */
+#define	AHB_CPUCLK_1_1		0x00
+#define	AHB_CPUCLK_1_2		0x01
+#define	AHB_CPUCLK_1_4		0x02
+#define	AHB_CPUCLK_1_8		0x03
+
+/* Define APB:AHB ratio */
+#define APB_AHB_1_2		0x01
+#define APB_AHB_1_4		0x02
+#define APB_AHB_1_8		0x03
+
+/* Define clock skew */
+#define DEFAULTSKEW		0x48
+
 #endif /*  __ASM_ARCH_REGS_CLOCK_H */
diff --git a/arch/arm/mach-w90x900/include/mach/regs-ebi.h b/arch/arm/mach-w90x900/include/mach/regs-ebi.h
new file mode 100644
index 000000000000..b68455e7f88b
--- /dev/null
+++ b/arch/arm/mach-w90x900/include/mach/regs-ebi.h
@@ -0,0 +1,33 @@
+/*
+ * arch/arm/mach-w90x900/include/mach/regs-ebi.h
+ *
+ * Copyright (c) 2009 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#ifndef __ASM_ARCH_REGS_EBI_H
+#define __ASM_ARCH_REGS_EBI_H
+
+/* EBI Control Registers */
+
+#define EBI_BA		W90X900_VA_EBI
+#define REG_EBICON	(EBI_BA + 0x00)
+#define REG_ROMCON	(EBI_BA + 0x04)
+#define REG_SDCONF0	(EBI_BA + 0x08)
+#define REG_SDCONF1	(EBI_BA + 0x0C)
+#define REG_SDTIME0	(EBI_BA + 0x10)
+#define REG_SDTIME1	(EBI_BA + 0x14)
+#define REG_EXT0CON	(EBI_BA + 0x18)
+#define REG_EXT1CON	(EBI_BA + 0x1C)
+#define REG_EXT2CON	(EBI_BA + 0x20)
+#define REG_EXT3CON	(EBI_BA + 0x24)
+#define REG_EXT4CON	(EBI_BA + 0x28)
+#define REG_CKSKEW	(EBI_BA + 0x2C)
+
+#endif /*  __ASM_ARCH_REGS_EBI_H */
diff --git a/arch/arm/mach-w90x900/irq.c b/arch/arm/mach-w90x900/irq.c
index 0b4fc194729c..0ce9d8e867eb 100644
--- a/arch/arm/mach-w90x900/irq.c
+++ b/arch/arm/mach-w90x900/irq.c
@@ -10,8 +10,7 @@
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * the Free Software Foundation;version 2 of the License.
  *
  */
 
@@ -29,9 +28,114 @@
 #include <mach/hardware.h>
 #include <mach/regs-irq.h>
 
-static void w90x900_irq_mask(unsigned int irq)
+struct group_irq {
+	unsigned long		gpen;
+	unsigned int		enabled;
+	void			(*enable)(struct group_irq *, int enable);
+};
+
+static DEFINE_SPINLOCK(groupirq_lock);
+
+#define DEFINE_GROUP(_name, _ctrlbit, _num)				\
+struct group_irq group_##_name = {					\
+		.enable		= nuc900_group_enable,			\
+		.gpen		= ((1 << _num) - 1) << _ctrlbit,	\
+	}
+
+static void nuc900_group_enable(struct group_irq *gpirq, int enable);
+
+static DEFINE_GROUP(nirq0, 0, 4);
+static DEFINE_GROUP(nirq1, 4, 4);
+static DEFINE_GROUP(usbh, 8, 2);
+static DEFINE_GROUP(ottimer, 16, 3);
+static DEFINE_GROUP(gdma, 20, 2);
+static DEFINE_GROUP(sc, 24, 2);
+static DEFINE_GROUP(i2c, 26, 2);
+static DEFINE_GROUP(ps2, 28, 2);
+
+static int group_irq_enable(struct group_irq *group_irq)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&groupirq_lock, flags);
+	if (group_irq->enabled++ == 0)
+		(group_irq->enable)(group_irq, 1);
+	spin_unlock_irqrestore(&groupirq_lock, flags);
+
+	return 0;
+}
+
+static void group_irq_disable(struct group_irq *group_irq)
 {
+	unsigned long flags;
+
+	WARN_ON(group_irq->enabled == 0);
+
+	spin_lock_irqsave(&groupirq_lock, flags);
+	if (--group_irq->enabled == 0)
+		(group_irq->enable)(group_irq, 0);
+	spin_unlock_irqrestore(&groupirq_lock, flags);
+}
+
+static void nuc900_group_enable(struct group_irq *gpirq, int enable)
+{
+	unsigned int groupen = gpirq->gpen;
+	unsigned long regval;
+
+	regval = __raw_readl(REG_AIC_GEN);
+
+	if (enable)
+		regval |= groupen;
+	else
+		regval &= ~groupen;
+
+	__raw_writel(regval, REG_AIC_GEN);
+}
+
+static void nuc900_irq_mask(unsigned int irq)
+{
+	struct group_irq *group_irq;
+
+	group_irq = NULL;
+
 	__raw_writel(1 << irq, REG_AIC_MDCR);
+
+	switch (irq) {
+	case IRQ_GROUP0:
+		group_irq = &group_nirq0;
+		break;
+
+	case IRQ_GROUP1:
+		group_irq = &group_nirq1;
+		break;
+
+	case IRQ_USBH:
+		group_irq = &group_usbh;
+		break;
+
+	case IRQ_T_INT_GROUP:
+		group_irq = &group_ottimer;
+		break;
+
+	case IRQ_GDMAGROUP:
+		group_irq = &group_gdma;
+		break;
+
+	case IRQ_SCGROUP:
+		group_irq = &group_sc;
+		break;
+
+	case IRQ_I2CGROUP:
+		group_irq = &group_i2c;
+		break;
+
+	case IRQ_P2SGROUP:
+		group_irq = &group_ps2;
+		break;
+	}
+
+	if (group_irq)
+		group_irq_disable(group_irq);
 }
 
 /*
@@ -39,37 +143,71 @@ static void w90x900_irq_mask(unsigned int irq)
  * to REG_AIC_EOSCR for ACK
  */
 
-static void w90x900_irq_ack(unsigned int irq)
+static void nuc900_irq_ack(unsigned int irq)
 {
 	__raw_writel(0x01, REG_AIC_EOSCR);
 }
 
-static void w90x900_irq_unmask(unsigned int irq)
+static void nuc900_irq_unmask(unsigned int irq)
 {
-	unsigned long mask;
+	struct group_irq *group_irq;
+
+	group_irq = NULL;
 
-	if (irq == IRQ_T_INT_GROUP) {
-		mask = __raw_readl(REG_AIC_GEN);
-		__raw_writel(TIME_GROUP_IRQ | mask, REG_AIC_GEN);
-		__raw_writel(1 << IRQ_T_INT_GROUP, REG_AIC_MECR);
-	}
 	__raw_writel(1 << irq, REG_AIC_MECR);
+
+	switch (irq) {
+	case IRQ_GROUP0:
+		group_irq = &group_nirq0;
+		break;
+
+	case IRQ_GROUP1:
+		group_irq = &group_nirq1;
+		break;
+
+	case IRQ_USBH:
+		group_irq = &group_usbh;
+		break;
+
+	case IRQ_T_INT_GROUP:
+		group_irq = &group_ottimer;
+		break;
+
+	case IRQ_GDMAGROUP:
+		group_irq = &group_gdma;
+		break;
+
+	case IRQ_SCGROUP:
+		group_irq = &group_sc;
+		break;
+
+	case IRQ_I2CGROUP:
+		group_irq = &group_i2c;
+		break;
+
+	case IRQ_P2SGROUP:
+		group_irq = &group_ps2;
+		break;
+	}
+
+	if (group_irq)
+		group_irq_enable(group_irq);
 }
 
-static struct irq_chip w90x900_irq_chip = {
-	.ack	   = w90x900_irq_ack,
-	.mask	   = w90x900_irq_mask,
-	.unmask	   = w90x900_irq_unmask,
+static struct irq_chip nuc900_irq_chip = {
+	.ack	   = nuc900_irq_ack,
+	.mask	   = nuc900_irq_mask,
+	.unmask	   = nuc900_irq_unmask,
 };
 
-void __init w90x900_init_irq(void)
+void __init nuc900_init_irq(void)
 {
 	int irqno;
 
 	__raw_writel(0xFFFFFFFE, REG_AIC_MDCR);
 
 	for (irqno = IRQ_WDT; irqno <= IRQ_ADC; irqno++) {
-		set_irq_chip(irqno, &w90x900_irq_chip);
+		set_irq_chip(irqno, &nuc900_irq_chip);
 		set_irq_handler(irqno, handle_level_irq);
 		set_irq_flags(irqno, IRQF_VALID);
 	}
diff --git a/arch/arm/mach-w90x900/mach-nuc910evb.c b/arch/arm/mach-w90x900/mach-nuc910evb.c
new file mode 100644
index 000000000000..ec05bda946f3
--- /dev/null
+++ b/arch/arm/mach-w90x900/mach-nuc910evb.c
@@ -0,0 +1,44 @@
+/*
+ * linux/arch/arm/mach-w90x900/mach-nuc910evb.c
+ *
+ * Based on mach-s3c2410/mach-smdk2410.c by Jonas Dietsche
+ *
+ * Copyright (C) 2008 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach-types.h>
+#include <mach/map.h>
+
+#include "nuc910.h"
+
+static void __init nuc910evb_map_io(void)
+{
+	nuc910_map_io();
+	nuc910_init_clocks();
+}
+
+static void __init nuc910evb_init(void)
+{
+	nuc910_board_init();
+}
+
+MACHINE_START(W90P910EVB, "W90P910EVB")
+	/* Maintainer: Wan ZongShun */
+	.phys_io	= W90X900_PA_UART,
+	.io_pg_offst	= (((u32)W90X900_VA_UART) >> 18) & 0xfffc,
+	.boot_params	= 0,
+	.map_io		= nuc910evb_map_io,
+	.init_irq	= nuc900_init_irq,
+	.init_machine	= nuc910evb_init,
+	.timer		= &nuc900_timer,
+MACHINE_END
diff --git a/arch/arm/mach-w90x900/mach-nuc950evb.c b/arch/arm/mach-w90x900/mach-nuc950evb.c
new file mode 100644
index 000000000000..cef903bcccd1
--- /dev/null
+++ b/arch/arm/mach-w90x900/mach-nuc950evb.c
@@ -0,0 +1,44 @@
+/*
+ * linux/arch/arm/mach-w90x900/mach-nuc950evb.c
+ *
+ * Based on mach-s3c2410/mach-smdk2410.c by Jonas Dietsche
+ *
+ * Copyright (C) 2008 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach-types.h>
+#include <mach/map.h>
+
+#include "nuc950.h"
+
+static void __init nuc950evb_map_io(void)
+{
+	nuc950_map_io();
+	nuc950_init_clocks();
+}
+
+static void __init nuc950evb_init(void)
+{
+	nuc950_board_init();
+}
+
+MACHINE_START(W90P950EVB, "W90P950EVB")
+	/* Maintainer: Wan ZongShun */
+	.phys_io	= W90X900_PA_UART,
+	.io_pg_offst	= (((u32)W90X900_VA_UART) >> 18) & 0xfffc,
+	.boot_params	= 0,
+	.map_io		= nuc950evb_map_io,
+	.init_irq	= nuc900_init_irq,
+	.init_machine	= nuc950evb_init,
+	.timer		= &nuc900_timer,
+MACHINE_END
diff --git a/arch/arm/mach-w90x900/mach-nuc960evb.c b/arch/arm/mach-w90x900/mach-nuc960evb.c
new file mode 100644
index 000000000000..e3a46f19f2bc
--- /dev/null
+++ b/arch/arm/mach-w90x900/mach-nuc960evb.c
@@ -0,0 +1,44 @@
+/*
+ * linux/arch/arm/mach-w90x900/mach-nuc960evb.c
+ *
+ * Based on mach-s3c2410/mach-smdk2410.c by Jonas Dietsche
+ *
+ * Copyright (C) 2008 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach-types.h>
+#include <mach/map.h>
+
+#include "nuc960.h"
+
+static void __init nuc960evb_map_io(void)
+{
+	nuc960_map_io();
+	nuc960_init_clocks();
+}
+
+static void __init nuc960evb_init(void)
+{
+	nuc960_board_init();
+}
+
+MACHINE_START(W90N960EVB, "W90N960EVB")
+	/* Maintainer: Wan ZongShun */
+	.phys_io	= W90X900_PA_UART,
+	.io_pg_offst	= (((u32)W90X900_VA_UART) >> 18) & 0xfffc,
+	.boot_params	= 0,
+	.map_io		= nuc960evb_map_io,
+	.init_irq	= nuc900_init_irq,
+	.init_machine	= nuc960evb_init,
+	.timer		= &nuc900_timer,
+MACHINE_END
diff --git a/arch/arm/mach-w90x900/mach-w90p910evb.c b/arch/arm/mach-w90x900/mach-w90p910evb.c
deleted file mode 100644
index 7a62bd348e80..000000000000
--- a/arch/arm/mach-w90x900/mach-w90p910evb.c
+++ /dev/null
@@ -1,267 +0,0 @@
-/*
- * linux/arch/arm/mach-w90x900/mach-w90p910evb.c
- *
- * Based on mach-s3c2410/mach-smdk2410.c by Jonas Dietsche
- *
- * Copyright (C) 2008 Nuvoton technology corporation.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation;version 2 of the License.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <asm/mach-types.h>
-
-#include <mach/regs-serial.h>
-#include <mach/map.h>
-
-#include "cpu.h"
-/*w90p910 evb norflash driver data */
-
-#define W90P910_FLASH_BASE	0xA0000000
-#define W90P910_FLASH_SIZE	0x400000
-
-static struct mtd_partition w90p910_flash_partitions[] = {
-	{
-		.name	=	"NOR Partition 1 for kernel (960K)",
-		.size	=	0xF0000,
-		.offset	=	0x10000,
-	},
-	{
-		.name	=	"NOR Partition 2 for image (1M)",
-		.size	=	0x100000,
-		.offset	=	0x100000,
-	},
-	{
-		.name	=	"NOR Partition 3 for user (2M)",
-		.size	=	0x200000,
-		.offset	=	0x00200000,
-	}
-};
-
-static struct physmap_flash_data w90p910_flash_data = {
-	.width		=	2,
-	.parts		=	w90p910_flash_partitions,
-	.nr_parts	=	ARRAY_SIZE(w90p910_flash_partitions),
-};
-
-static struct resource w90p910_flash_resources[] = {
-	{
-		.start	=	W90P910_FLASH_BASE,
-		.end	=	W90P910_FLASH_BASE + W90P910_FLASH_SIZE - 1,
-		.flags	=	IORESOURCE_MEM,
-	}
-};
-
-static struct platform_device w90p910_flash_device = {
-	.name		=	"physmap-flash",
-	.id		=	0,
-	.dev		= {
-				.platform_data = &w90p910_flash_data,
-			},
-	.resource	=	w90p910_flash_resources,
-	.num_resources	=	ARRAY_SIZE(w90p910_flash_resources),
-};
-
-/* USB EHCI Host Controller */
-
-static struct resource w90x900_usb_ehci_resource[] = {
-	[0] = {
-		.start = W90X900_PA_USBEHCIHOST,
-		.end   = W90X900_PA_USBEHCIHOST + W90X900_SZ_USBEHCIHOST - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_USBH,
-		.end   = IRQ_USBH,
-		.flags = IORESOURCE_IRQ,
-	}
-};
-
-static u64 w90x900_device_usb_ehci_dmamask = 0xffffffffUL;
-
-struct platform_device w90x900_device_usb_ehci = {
-	.name		  = "w90x900-ehci",
-	.id		  = -1,
-	.num_resources	  = ARRAY_SIZE(w90x900_usb_ehci_resource),
-	.resource	  = w90x900_usb_ehci_resource,
-	.dev              = {
-		.dma_mask = &w90x900_device_usb_ehci_dmamask,
-		.coherent_dma_mask = 0xffffffffUL
-	}
-};
-EXPORT_SYMBOL(w90x900_device_usb_ehci);
-
-/* USB OHCI Host Controller */
-
-static struct resource w90x900_usb_ohci_resource[] = {
-	[0] = {
-		.start = W90X900_PA_USBOHCIHOST,
-		.end   = W90X900_PA_USBOHCIHOST + W90X900_SZ_USBOHCIHOST - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_USBH,
-		.end   = IRQ_USBH,
-		.flags = IORESOURCE_IRQ,
-	}
-};
-
-static u64 w90x900_device_usb_ohci_dmamask = 0xffffffffUL;
-struct platform_device w90x900_device_usb_ohci = {
-	.name		  = "w90x900-ohci",
-	.id		  = -1,
-	.num_resources	  = ARRAY_SIZE(w90x900_usb_ohci_resource),
-	.resource	  = w90x900_usb_ohci_resource,
-	.dev              = {
-		.dma_mask = &w90x900_device_usb_ohci_dmamask,
-		.coherent_dma_mask = 0xffffffffUL
-	}
-};
-EXPORT_SYMBOL(w90x900_device_usb_ohci);
-
-/*TouchScreen controller*/
-
-static struct resource w90x900_ts_resource[] = {
-	[0] = {
-		.start = W90X900_PA_ADC,
-		.end   = W90X900_PA_ADC + W90X900_SZ_ADC-1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_ADC,
-		.end   = IRQ_ADC,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device w90x900_device_ts = {
-	.name		= "w90x900-ts",
-	.id		= -1,
-	.resource	= w90x900_ts_resource,
-	.num_resources	= ARRAY_SIZE(w90x900_ts_resource),
-};
-EXPORT_SYMBOL(w90x900_device_ts);
-
-/* RTC controller*/
-
-static struct resource w90x900_rtc_resource[] = {
-	[0] = {
-		.start = W90X900_PA_RTC,
-		.end   = W90X900_PA_RTC + 0xff,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_RTC,
-		.end   = IRQ_RTC,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device w90x900_device_rtc = {
-	.name		= "w90x900-rtc",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(w90x900_rtc_resource),
-	.resource	= w90x900_rtc_resource,
-};
-EXPORT_SYMBOL(w90x900_device_rtc);
-
-/* KPI controller*/
-
-static struct resource w90x900_kpi_resource[] = {
-	[0] = {
-		.start = W90X900_PA_KPI,
-		.end   = W90X900_PA_KPI + W90X900_SZ_KPI - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_KPI,
-		.end   = IRQ_KPI,
-		.flags = IORESOURCE_IRQ,
-	}
-
-};
-
-struct platform_device w90x900_device_kpi = {
-	.name		= "w90x900-kpi",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(w90x900_kpi_resource),
-	.resource	= w90x900_kpi_resource,
-};
-EXPORT_SYMBOL(w90x900_device_kpi);
-
-/* USB Device (Gadget)*/
-
-static struct resource w90x900_usbgadget_resource[] = {
-	[0] = {
-		.start = W90X900_PA_USBDEV,
-		.end   = W90X900_PA_USBDEV + W90X900_SZ_USBDEV - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_USBD,
-		.end   = IRQ_USBD,
-		.flags = IORESOURCE_IRQ,
-	}
-};
-
-struct platform_device w90x900_device_usbgadget = {
-	.name		= "w90x900-usbgadget",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(w90x900_usbgadget_resource),
-	.resource	= w90x900_usbgadget_resource,
-};
-EXPORT_SYMBOL(w90x900_device_usbgadget);
-
-static struct map_desc w90p910_iodesc[] __initdata = {
-};
-
-/*Here should be your evb resourse,such as LCD*/
-
-static struct platform_device *w90p910evb_dev[] __initdata = {
-	&w90p910_serial_device,
-	&w90p910_flash_device,
-	&w90x900_device_usb_ehci,
-	&w90x900_device_usb_ohci,
-	&w90x900_device_ts,
-	&w90x900_device_rtc,
-	&w90x900_device_kpi,
-	&w90x900_device_usbgadget,
-};
-
-static void __init w90p910evb_map_io(void)
-{
-	w90p910_map_io(w90p910_iodesc, ARRAY_SIZE(w90p910_iodesc));
-	w90p910_init_clocks();
-}
-
-static void __init w90p910evb_init(void)
-{
-	platform_add_devices(w90p910evb_dev, ARRAY_SIZE(w90p910evb_dev));
-}
-
-MACHINE_START(W90P910EVB, "W90P910EVB")
-	/* Maintainer: Wan ZongShun */
-	.phys_io	= W90X900_PA_UART,
-	.io_pg_offst	= (((u32)W90X900_VA_UART) >> 18) & 0xfffc,
-	.boot_params	= 0,
-	.map_io		= w90p910evb_map_io,
-	.init_irq	= w90x900_init_irq,
-	.init_machine	= w90p910evb_init,
-	.timer		= &w90x900_timer,
-MACHINE_END
diff --git a/arch/arm/mach-w90x900/mfp-w90p910.c b/arch/arm/mach-w90x900/mfp-w90p910.c
deleted file mode 100644
index a3520fefb5e7..000000000000
--- a/arch/arm/mach-w90x900/mfp-w90p910.c
+++ /dev/null
@@ -1,116 +0,0 @@
-/*
- * linux/arch/arm/mach-w90x900/mfp-w90p910.c
- *
- * Copyright (c) 2008 Nuvoton technology corporation
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation;version 2 of the License.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/string.h>
-#include <linux/clk.h>
-#include <linux/mutex.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-
-#define REG_MFSEL	(W90X900_VA_GCR + 0xC)
-
-#define GPSELF		(0x01 << 1)
-
-#define GPSELC		(0x03 << 2)
-#define ENKPI		(0x02 << 2)
-#define ENNAND		(0x01 << 2)
-
-#define GPSELEI0	(0x01 << 26)
-#define GPSELEI1	(0x01 << 27)
-
-static DECLARE_MUTEX(mfp_sem);
-
-void mfp_set_groupf(struct device *dev)
-{
-	unsigned long mfpen;
-	const char *dev_id;
-
-	BUG_ON(!dev);
-
-	down(&mfp_sem);
-
-	dev_id = dev_name(dev);
-
-	mfpen = __raw_readl(REG_MFSEL);
-
-	if (strcmp(dev_id, "w90p910-emc") == 0)
-		mfpen |= GPSELF;/*enable mac*/
-	else
-		mfpen &= ~GPSELF;/*GPIOF[9:0]*/
-
-	__raw_writel(mfpen, REG_MFSEL);
-
-	up(&mfp_sem);
-}
-EXPORT_SYMBOL(mfp_set_groupf);
-
-void mfp_set_groupc(struct device *dev)
-{
-	unsigned long mfpen;
-	const char *dev_id;
-
-	BUG_ON(!dev);
-
-	down(&mfp_sem);
-
-	dev_id = dev_name(dev);
-
-	mfpen = __raw_readl(REG_MFSEL);
-
-	if (strcmp(dev_id, "w90p910-lcd") == 0)
-		mfpen |= GPSELC;/*enable lcd*/
-	else if (strcmp(dev_id, "w90p910-kpi") == 0) {
-			mfpen &= (~GPSELC);/*enable kpi*/
-			mfpen |= ENKPI;
-		} else if (strcmp(dev_id, "w90p910-nand") == 0) {
-				mfpen &= (~GPSELC);/*enable nand*/
-				mfpen |= ENNAND;
-			} else
-				mfpen &= (~GPSELC);/*GPIOC[14:0]*/
-
-	__raw_writel(mfpen, REG_MFSEL);
-
-	up(&mfp_sem);
-}
-EXPORT_SYMBOL(mfp_set_groupc);
-
-void mfp_set_groupi(struct device *dev, int gpio)
-{
-	unsigned long mfpen;
-	const char *dev_id;
-
-	BUG_ON(!dev);
-
-	down(&mfp_sem);
-
-	dev_id = dev_name(dev);
-
-	mfpen = __raw_readl(REG_MFSEL);
-
-	if (strcmp(dev_id, "w90p910-wdog") == 0)
-		mfpen |= GPSELEI1;/*enable wdog*/
-		else if (strcmp(dev_id, "w90p910-atapi") == 0)
-			mfpen |= GPSELEI0;/*enable atapi*/
-
-	__raw_writel(mfpen, REG_MFSEL);
-
-	up(&mfp_sem);
-}
-EXPORT_SYMBOL(mfp_set_groupi);
-
diff --git a/arch/arm/mach-w90x900/mfp.c b/arch/arm/mach-w90x900/mfp.c
new file mode 100644
index 000000000000..a47dc9a708ee
--- /dev/null
+++ b/arch/arm/mach-w90x900/mfp.c
@@ -0,0 +1,158 @@
+/*
+ * linux/arch/arm/mach-w90x900/mfp.c
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/string.h>
+#include <linux/clk.h>
+#include <linux/mutex.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+
+#define REG_MFSEL	(W90X900_VA_GCR + 0xC)
+
+#define GPSELF		(0x01 << 1)
+
+#define GPSELC		(0x03 << 2)
+#define ENKPI		(0x02 << 2)
+#define ENNAND		(0x01 << 2)
+
+#define GPSELEI0	(0x01 << 26)
+#define GPSELEI1	(0x01 << 27)
+
+#define GPIOG0TO1	(0x03 << 14)
+#define GPIOG2TO3	(0x03 << 16)
+#define ENSPI		(0x0a << 14)
+#define ENI2C0		(0x01 << 14)
+#define ENI2C1		(0x01 << 16)
+
+static DEFINE_MUTEX(mfp_mutex);
+
+void mfp_set_groupf(struct device *dev)
+{
+	unsigned long mfpen;
+	const char *dev_id;
+
+	BUG_ON(!dev);
+
+	mutex_lock(&mfp_mutex);
+
+	dev_id = dev_name(dev);
+
+	mfpen = __raw_readl(REG_MFSEL);
+
+	if (strcmp(dev_id, "nuc900-emc") == 0)
+		mfpen |= GPSELF;/*enable mac*/
+	else
+		mfpen &= ~GPSELF;/*GPIOF[9:0]*/
+
+	__raw_writel(mfpen, REG_MFSEL);
+
+	mutex_unlock(&mfp_mutex);
+}
+EXPORT_SYMBOL(mfp_set_groupf);
+
+void mfp_set_groupc(struct device *dev)
+{
+	unsigned long mfpen;
+	const char *dev_id;
+
+	BUG_ON(!dev);
+
+	mutex_lock(&mfp_mutex);
+
+	dev_id = dev_name(dev);
+
+	mfpen = __raw_readl(REG_MFSEL);
+
+	if (strcmp(dev_id, "nuc900-lcd") == 0)
+		mfpen |= GPSELC;/*enable lcd*/
+	else if (strcmp(dev_id, "nuc900-kpi") == 0) {
+		mfpen &= (~GPSELC);/*enable kpi*/
+		mfpen |= ENKPI;
+	} else if (strcmp(dev_id, "nuc900-nand") == 0) {
+		mfpen &= (~GPSELC);/*enable nand*/
+		mfpen |= ENNAND;
+	} else
+		mfpen &= (~GPSELC);/*GPIOC[14:0]*/
+
+	__raw_writel(mfpen, REG_MFSEL);
+
+	mutex_unlock(&mfp_mutex);
+}
+EXPORT_SYMBOL(mfp_set_groupc);
+
+void mfp_set_groupi(struct device *dev)
+{
+	unsigned long mfpen;
+	const char *dev_id;
+
+	BUG_ON(!dev);
+
+	mutex_lock(&mfp_mutex);
+
+	dev_id = dev_name(dev);
+
+	mfpen = __raw_readl(REG_MFSEL);
+
+	mfpen &= ~GPSELEI1;/*default gpio16*/
+
+	if (strcmp(dev_id, "nuc900-wdog") == 0)
+		mfpen |= GPSELEI1;/*enable wdog*/
+	else if (strcmp(dev_id, "nuc900-atapi") == 0)
+		mfpen |= GPSELEI0;/*enable atapi*/
+	else if (strcmp(dev_id, "nuc900-keypad") == 0)
+		mfpen &= ~GPSELEI0;/*enable keypad*/
+
+	__raw_writel(mfpen, REG_MFSEL);
+
+	mutex_unlock(&mfp_mutex);
+}
+EXPORT_SYMBOL(mfp_set_groupi);
+
+void mfp_set_groupg(struct device *dev)
+{
+	unsigned long mfpen;
+	const char *dev_id;
+
+	BUG_ON(!dev);
+
+	mutex_lock(&mfp_mutex);
+
+	dev_id = dev_name(dev);
+
+	mfpen = __raw_readl(REG_MFSEL);
+
+	if (strcmp(dev_id, "nuc900-spi") == 0) {
+		mfpen &= ~(GPIOG0TO1 | GPIOG2TO3);
+		mfpen |= ENSPI;/*enable spi*/
+	} else if (strcmp(dev_id, "nuc900-i2c0") == 0) {
+		mfpen &= ~(GPIOG0TO1);
+		mfpen |= ENI2C0;/*enable i2c0*/
+	} else if (strcmp(dev_id, "nuc900-i2c1") == 0) {
+		mfpen &= ~(GPIOG2TO3);
+		mfpen |= ENI2C1;/*enable i2c1*/
+	} else {
+		mfpen &= ~(GPIOG0TO1 | GPIOG2TO3);/*GPIOG[3:0]*/
+	}
+
+	__raw_writel(mfpen, REG_MFSEL);
+
+	mutex_unlock(&mfp_mutex);
+}
+EXPORT_SYMBOL(mfp_set_groupg);
+
diff --git a/arch/arm/mach-w90x900/nuc910.c b/arch/arm/mach-w90x900/nuc910.c
new file mode 100644
index 000000000000..656f03b3b629
--- /dev/null
+++ b/arch/arm/mach-w90x900/nuc910.c
@@ -0,0 +1,60 @@
+/*
+ * linux/arch/arm/mach-w90x900/nuc910.c
+ *
+ * Based on linux/arch/arm/plat-s3c24xx/s3c244x.c by Ben Dooks
+ *
+ * Copyright (c) 2009 Nuvoton corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * NUC910 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <asm/mach/map.h>
+#include <mach/hardware.h>
+#include "cpu.h"
+#include "clock.h"
+
+/* define specific CPU platform device */
+
+static struct platform_device *nuc910_dev[] __initdata = {
+	&nuc900_device_ts,
+	&nuc900_device_rtc,
+};
+
+/* define specific CPU platform io map */
+
+static struct map_desc nuc910evb_iodesc[] __initdata = {
+	IODESC_ENT(USBEHCIHOST),
+	IODESC_ENT(USBOHCIHOST),
+	IODESC_ENT(KPI),
+	IODESC_ENT(USBDEV),
+	IODESC_ENT(ADC),
+};
+
+/*Init NUC910 evb io*/
+
+void __init nuc910_map_io(void)
+{
+	nuc900_map_io(nuc910evb_iodesc, ARRAY_SIZE(nuc910evb_iodesc));
+}
+
+/*Init NUC910 clock*/
+
+void __init nuc910_init_clocks(void)
+{
+	nuc900_init_clocks();
+}
+
+/*Init NUC910 board info*/
+
+void __init nuc910_board_init(void)
+{
+	nuc900_board_init(nuc910_dev, ARRAY_SIZE(nuc910_dev));
+}
diff --git a/arch/arm/mach-w90x900/nuc910.h b/arch/arm/mach-w90x900/nuc910.h
new file mode 100644
index 000000000000..83e9ba5fc26c
--- /dev/null
+++ b/arch/arm/mach-w90x900/nuc910.h
@@ -0,0 +1,28 @@
+/*
+ * arch/arm/mach-w90x900/nuc910.h
+ *
+ * Copyright (c) 2008 Nuvoton corporation
+ *
+ * Header file for NUC900 CPU support
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+struct map_desc;
+struct sys_timer;
+
+/* core initialisation functions */
+
+extern void nuc900_init_irq(void);
+extern struct sys_timer nuc900_timer;
+
+/* extern file from nuc910.c */
+
+extern void nuc910_board_init(void);
+extern void nuc910_init_clocks(void);
+extern void nuc910_map_io(void);
diff --git a/arch/arm/mach-w90x900/nuc950.c b/arch/arm/mach-w90x900/nuc950.c
new file mode 100644
index 000000000000..149508116d18
--- /dev/null
+++ b/arch/arm/mach-w90x900/nuc950.c
@@ -0,0 +1,54 @@
+/*
+ * linux/arch/arm/mach-w90x900/nuc950.c
+ *
+ * Based on linux/arch/arm/plat-s3c24xx/s3c244x.c by Ben Dooks
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * NUC950 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <asm/mach/map.h>
+#include <mach/hardware.h>
+#include "cpu.h"
+
+/* define specific CPU platform device */
+
+static struct platform_device *nuc950_dev[] __initdata = {
+	&nuc900_device_kpi,
+	&nuc900_device_fmi,
+};
+
+/* define specific CPU platform io map */
+
+static struct map_desc nuc950evb_iodesc[] __initdata = {
+};
+
+/*Init NUC950 evb io*/
+
+void __init nuc950_map_io(void)
+{
+	nuc900_map_io(nuc950evb_iodesc, ARRAY_SIZE(nuc950evb_iodesc));
+}
+
+/*Init NUC950 clock*/
+
+void __init nuc950_init_clocks(void)
+{
+	nuc900_init_clocks();
+}
+
+/*Init NUC950 board info*/
+
+void __init nuc950_board_init(void)
+{
+	nuc900_board_init(nuc950_dev, ARRAY_SIZE(nuc950_dev));
+}
diff --git a/arch/arm/mach-w90x900/nuc950.h b/arch/arm/mach-w90x900/nuc950.h
new file mode 100644
index 000000000000..98a1148bc5ae
--- /dev/null
+++ b/arch/arm/mach-w90x900/nuc950.h
@@ -0,0 +1,28 @@
+/*
+ * arch/arm/mach-w90x900/nuc950.h
+ *
+ * Copyright (c) 2008 Nuvoton corporation
+ *
+ * Header file for NUC900 CPU support
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+struct map_desc;
+struct sys_timer;
+
+/* core initialisation functions */
+
+extern void nuc900_init_irq(void);
+extern struct sys_timer nuc900_timer;
+
+/* extern file from nuc950.c */
+
+extern void nuc950_board_init(void);
+extern void nuc950_init_clocks(void);
+extern void nuc950_map_io(void);
diff --git a/arch/arm/mach-w90x900/nuc960.c b/arch/arm/mach-w90x900/nuc960.c
new file mode 100644
index 000000000000..8851a3a27ce2
--- /dev/null
+++ b/arch/arm/mach-w90x900/nuc960.c
@@ -0,0 +1,54 @@
+/*
+ * linux/arch/arm/mach-w90x900/nuc960.c
+ *
+ * Based on linux/arch/arm/plat-s3c24xx/s3c244x.c by Ben Dooks
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * NUC960 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <asm/mach/map.h>
+#include <mach/hardware.h>
+#include "cpu.h"
+
+/* define specific CPU platform device */
+
+static struct platform_device *nuc960_dev[] __initdata = {
+	&nuc900_device_kpi,
+	&nuc900_device_fmi,
+};
+
+/* define specific CPU platform io map */
+
+static struct map_desc nuc960evb_iodesc[] __initdata = {
+};
+
+/*Init NUC960 evb io*/
+
+void __init nuc960_map_io(void)
+{
+	nuc900_map_io(nuc960evb_iodesc, ARRAY_SIZE(nuc960evb_iodesc));
+}
+
+/*Init NUC960 clock*/
+
+void __init nuc960_init_clocks(void)
+{
+	nuc900_init_clocks();
+}
+
+/*Init NUC960 board info*/
+
+void __init nuc960_board_init(void)
+{
+	nuc900_board_init(nuc960_dev, ARRAY_SIZE(nuc960_dev));
+}
diff --git a/arch/arm/mach-w90x900/nuc960.h b/arch/arm/mach-w90x900/nuc960.h
new file mode 100644
index 000000000000..f0c07cbe3a82
--- /dev/null
+++ b/arch/arm/mach-w90x900/nuc960.h
@@ -0,0 +1,28 @@
+/*
+ * arch/arm/mach-w90x900/nuc960.h
+ *
+ * Copyright (c) 2008 Nuvoton corporation
+ *
+ * Header file for NUC900 CPU support
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+struct map_desc;
+struct sys_timer;
+
+/* core initialisation functions */
+
+extern void nuc900_init_irq(void);
+extern struct sys_timer nuc900_timer;
+
+/* extern file from nuc960.c */
+
+extern void nuc960_board_init(void);
+extern void nuc960_init_clocks(void);
+extern void nuc960_map_io(void);
diff --git a/arch/arm/mach-w90x900/time.c b/arch/arm/mach-w90x900/time.c
index bcc838f6b393..4128af870b41 100644
--- a/arch/arm/mach-w90x900/time.c
+++ b/arch/arm/mach-w90x900/time.c
@@ -3,7 +3,7 @@
  *
  * Based on linux/arch/arm/plat-s3c24xx/time.c by Ben Dooks
  *
- * Copyright (c) 2008 Nuvoton technology corporation
+ * Copyright (c) 2009 Nuvoton technology corporation
  * All rights reserved.
  *
  * Wan ZongShun <mcuos.com@gmail.com>
@@ -23,6 +23,8 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/leds.h>
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/irq.h>
@@ -31,49 +33,150 @@
 #include <mach/map.h>
 #include <mach/regs-timer.h>
 
-static unsigned long w90x900_gettimeoffset(void)
+#define RESETINT	0x1f
+#define PERIOD		(0x01 << 27)
+#define ONESHOT		(0x00 << 27)
+#define COUNTEN		(0x01 << 30)
+#define INTEN		(0x01 << 29)
+
+#define TICKS_PER_SEC	100
+#define PRESCALE	0x63 /* Divider = prescale + 1 */
+
+unsigned int timer0_load;
+
+static void nuc900_clockevent_setmode(enum clock_event_mode mode,
+		struct clock_event_device *clk)
 {
+	unsigned int val;
+
+	val = __raw_readl(REG_TCSR0);
+	val &= ~(0x03 << 27);
+
+	switch (mode) {
+	case CLOCK_EVT_MODE_PERIODIC:
+		__raw_writel(timer0_load, REG_TICR0);
+		val |= (PERIOD | COUNTEN | INTEN | PRESCALE);
+		break;
+
+	case CLOCK_EVT_MODE_ONESHOT:
+		val |= (ONESHOT | COUNTEN | INTEN | PRESCALE);
+		break;
+
+	case CLOCK_EVT_MODE_UNUSED:
+	case CLOCK_EVT_MODE_SHUTDOWN:
+	case CLOCK_EVT_MODE_RESUME:
+		break;
+	}
+
+	__raw_writel(val, REG_TCSR0);
+}
+
+static int nuc900_clockevent_setnextevent(unsigned long evt,
+		struct clock_event_device *clk)
+{
+	unsigned int val;
+
+	__raw_writel(evt, REG_TICR0);
+
+	val = __raw_readl(REG_TCSR0);
+	val |= (COUNTEN | INTEN | PRESCALE);
+	__raw_writel(val, REG_TCSR0);
+
 	return 0;
 }
 
+static struct clock_event_device nuc900_clockevent_device = {
+	.name		= "nuc900-timer0",
+	.shift		= 32,
+	.features	= CLOCK_EVT_MODE_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+	.set_mode	= nuc900_clockevent_setmode,
+	.set_next_event	= nuc900_clockevent_setnextevent,
+	.rating		= 300,
+};
+
 /*IRQ handler for the timer*/
 
-static irqreturn_t
-w90x900_timer_interrupt(int irq, void *dev_id)
+static irqreturn_t nuc900_timer0_interrupt(int irq, void *dev_id)
 {
-	timer_tick();
+	struct clock_event_device *evt = &nuc900_clockevent_device;
+
 	__raw_writel(0x01, REG_TISR); /* clear TIF0 */
+
+	evt->event_handler(evt);
 	return IRQ_HANDLED;
 }
 
-static struct irqaction w90x900_timer_irq = {
-	.name		= "w90x900 Timer Tick",
+static struct irqaction nuc900_timer0_irq = {
+	.name		= "nuc900-timer0",
 	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= w90x900_timer_interrupt,
+	.handler	= nuc900_timer0_interrupt,
 };
 
-/*Set up timer reg.*/
+static void __init nuc900_clockevents_init(unsigned int rate)
+{
+	nuc900_clockevent_device.mult = div_sc(rate, NSEC_PER_SEC,
+					nuc900_clockevent_device.shift);
+	nuc900_clockevent_device.max_delta_ns = clockevent_delta2ns(0xffffffff,
+					&nuc900_clockevent_device);
+	nuc900_clockevent_device.min_delta_ns = clockevent_delta2ns(0xf,
+					&nuc900_clockevent_device);
+	nuc900_clockevent_device.cpumask = cpumask_of(0);
 
-static void w90x900_timer_setup(void)
+	clockevents_register_device(&nuc900_clockevent_device);
+}
+
+static cycle_t nuc900_get_cycles(struct clocksource *cs)
 {
-	__raw_writel(0, REG_TCSR0);
-	__raw_writel(0, REG_TCSR1);
-	__raw_writel(0, REG_TCSR2);
-	__raw_writel(0, REG_TCSR3);
-	__raw_writel(0, REG_TCSR4);
-	__raw_writel(0x1F, REG_TISR);
-	__raw_writel(15000000/(100 * 100), REG_TICR0);
-	__raw_writel(0x68000063, REG_TCSR0);
+	return ~__raw_readl(REG_TDR1);
 }
 
-static void __init w90x900_timer_init(void)
+static struct clocksource clocksource_nuc900 = {
+	.name	= "nuc900-timer1",
+	.rating	= 200,
+	.read	= nuc900_get_cycles,
+	.mask	= CLOCKSOURCE_MASK(32),
+	.shift	= 20,
+	.flags	= CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static void __init nuc900_clocksource_init(unsigned int rate)
 {
-	w90x900_timer_setup();
-	setup_irq(IRQ_TIMER0, &w90x900_timer_irq);
+	unsigned int val;
+
+	__raw_writel(0xffffffff, REG_TICR1);
+
+	val = __raw_readl(REG_TCSR1);
+	val |= (COUNTEN | PERIOD);
+	__raw_writel(val, REG_TCSR1);
+
+	clocksource_nuc900.mult =
+		clocksource_khz2mult((rate / 1000), clocksource_nuc900.shift);
+	clocksource_register(&clocksource_nuc900);
+}
+
+static void __init nuc900_timer_init(void)
+{
+	struct clk *ck_ext = clk_get(NULL, "ext");
+	unsigned int	rate;
+
+	BUG_ON(IS_ERR(ck_ext));
+
+	rate = clk_get_rate(ck_ext);
+	clk_put(ck_ext);
+	rate = rate / (PRESCALE + 0x01);
+
+	 /* set a known state */
+	__raw_writel(0x00, REG_TCSR0);
+	__raw_writel(0x00, REG_TCSR1);
+	__raw_writel(RESETINT, REG_TISR);
+	timer0_load = (rate / TICKS_PER_SEC);
+
+	setup_irq(IRQ_TIMER0, &nuc900_timer0_irq);
+
+	nuc900_clocksource_init(rate);
+	nuc900_clockevents_init(rate);
 }
 
-struct sys_timer w90x900_timer = {
-	.init		= w90x900_timer_init,
-	.offset		= w90x900_gettimeoffset,
-	.resume		= w90x900_timer_setup
+struct sys_timer nuc900_timer = {
+	.init		= nuc900_timer_init,
 };
diff --git a/arch/arm/mach-w90x900/w90p910.c b/arch/arm/mach-w90x900/w90p910.c
deleted file mode 100644
index 1c97e4930b7a..000000000000
--- a/arch/arm/mach-w90x900/w90p910.c
+++ /dev/null
@@ -1,136 +0,0 @@
-/*
- * linux/arch/arm/mach-w90x900/w90p910.c
- *
- * Based on linux/arch/arm/plat-s3c24xx/s3c244x.c by Ben Dooks
- *
- * Copyright (c) 2008 Nuvoton technology corporation.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * W90P910 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation;version 2 of the License.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/serial_8250.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <asm/irq.h>
-
-#include <mach/hardware.h>
-#include <mach/regs-serial.h>
-
-#include "cpu.h"
-#include "clock.h"
-
-/* Initial IO mappings */
-
-static struct map_desc w90p910_iodesc[] __initdata = {
-	IODESC_ENT(IRQ),
-	IODESC_ENT(GCR),
-	IODESC_ENT(UART),
-	IODESC_ENT(TIMER),
-	IODESC_ENT(EBI),
-	IODESC_ENT(USBEHCIHOST),
-	IODESC_ENT(USBOHCIHOST),
-	IODESC_ENT(ADC),
-	IODESC_ENT(RTC),
-	IODESC_ENT(KPI),
-	IODESC_ENT(USBDEV),
-	/*IODESC_ENT(LCD),*/
-};
-
-/* Initial clock declarations. */
-static DEFINE_CLK(lcd, 0);
-static DEFINE_CLK(audio, 1);
-static DEFINE_CLK(fmi, 4);
-static DEFINE_CLK(dmac, 5);
-static DEFINE_CLK(atapi, 6);
-static DEFINE_CLK(emc, 7);
-static DEFINE_CLK(usbd, 8);
-static DEFINE_CLK(usbh, 9);
-static DEFINE_CLK(g2d, 10);;
-static DEFINE_CLK(pwm, 18);
-static DEFINE_CLK(ps2, 24);
-static DEFINE_CLK(kpi, 25);
-static DEFINE_CLK(wdt, 26);
-static DEFINE_CLK(gdma, 27);
-static DEFINE_CLK(adc, 28);
-static DEFINE_CLK(usi, 29);
-
-static struct clk_lookup w90p910_clkregs[] = {
-	DEF_CLKLOOK(&clk_lcd, "w90p910-lcd", NULL),
-	DEF_CLKLOOK(&clk_audio, "w90p910-audio", NULL),
-	DEF_CLKLOOK(&clk_fmi, "w90p910-fmi", NULL),
-	DEF_CLKLOOK(&clk_dmac, "w90p910-dmac", NULL),
-	DEF_CLKLOOK(&clk_atapi, "w90p910-atapi", NULL),
-	DEF_CLKLOOK(&clk_emc, "w90p910-emc", NULL),
-	DEF_CLKLOOK(&clk_usbd, "w90p910-usbd", NULL),
-	DEF_CLKLOOK(&clk_usbh, "w90p910-usbh", NULL),
-	DEF_CLKLOOK(&clk_g2d, "w90p910-g2d", NULL),
-	DEF_CLKLOOK(&clk_pwm, "w90p910-pwm", NULL),
-	DEF_CLKLOOK(&clk_ps2, "w90p910-ps2", NULL),
-	DEF_CLKLOOK(&clk_kpi, "w90p910-kpi", NULL),
-	DEF_CLKLOOK(&clk_wdt, "w90p910-wdt", NULL),
-	DEF_CLKLOOK(&clk_gdma, "w90p910-gdma", NULL),
-	DEF_CLKLOOK(&clk_adc, "w90p910-adc", NULL),
-	DEF_CLKLOOK(&clk_usi, "w90p910-usi", NULL),
-};
-
-/* Initial serial platform data */
-
-struct plat_serial8250_port w90p910_uart_data[] = {
-	W90X900_8250PORT(UART0),
-};
-
-struct platform_device w90p910_serial_device = {
-	.name			= "serial8250",
-	.id			= PLAT8250_DEV_PLATFORM,
-	.dev			= {
-		.platform_data	= w90p910_uart_data,
-	},
-};
-
-/*Init W90P910 evb io*/
-
-void __init w90p910_map_io(struct map_desc *mach_desc, int mach_size)
-{
-	unsigned long idcode = 0x0;
-
-	iotable_init(w90p910_iodesc, ARRAY_SIZE(w90p910_iodesc));
-
-	idcode = __raw_readl(W90X900PDID);
-	if (idcode != W90P910_CPUID)
-		printk(KERN_ERR "CPU type 0x%08lx is not W90P910\n", idcode);
-}
-
-/*Init W90P910 clock*/
-
-void __init w90p910_init_clocks(void)
-{
-	clks_register(w90p910_clkregs, ARRAY_SIZE(w90p910_clkregs));
-}
-
-static int __init w90p910_init_cpu(void)
-{
-	return 0;
-}
-
-static int __init w90x900_arch_init(void)
-{
-	return w90p910_init_cpu();
-}
-arch_initcall(w90x900_arch_init);
diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c
index 6fdcbb709827..5fa8dea5a371 100644
--- a/arch/arm/mm/fault.c
+++ b/arch/arm/mm/fault.c
@@ -16,6 +16,7 @@
 #include <linux/kprobes.h>
 #include <linux/uaccess.h>
 #include <linux/page-flags.h>
+#include <linux/highmem.h>
 
 #include <asm/system.h>
 #include <asm/pgtable.h>
diff --git a/arch/arm/mm/proc-macros.S b/arch/arm/mm/proc-macros.S
index 54b1f721dec8..a0b3f36f3178 100644
--- a/arch/arm/mm/proc-macros.S
+++ b/arch/arm/mm/proc-macros.S
@@ -80,12 +80,6 @@
 #if L_PTE_SHARED != PTE_EXT_SHARED
 #error PTE shared bit mismatch
 #endif
-#if L_PTE_BUFFERABLE != PTE_BUFFERABLE
-#error PTE bufferable bit mismatch
-#endif
-#if L_PTE_CACHEABLE != PTE_CACHEABLE
-#error PTE cacheable bit mismatch
-#endif
 #if (L_PTE_EXEC+L_PTE_USER+L_PTE_WRITE+L_PTE_DIRTY+L_PTE_YOUNG+\
      L_PTE_FILE+L_PTE_PRESENT) > L_PTE_SHARED
 #error Invalid Linux PTE bit settings
diff --git a/arch/arm/mm/proc-syms.c b/arch/arm/mm/proc-syms.c
index 195e48edd8c2..ac5c80062b70 100644
--- a/arch/arm/mm/proc-syms.c
+++ b/arch/arm/mm/proc-syms.c
@@ -27,6 +27,7 @@ EXPORT_SYMBOL(__cpuc_flush_kern_all);
 EXPORT_SYMBOL(__cpuc_flush_user_all);
 EXPORT_SYMBOL(__cpuc_flush_user_range);
 EXPORT_SYMBOL(__cpuc_coherent_kern_range);
+EXPORT_SYMBOL(__cpuc_flush_dcache_page);
 EXPORT_SYMBOL(dmac_inv_range);  /* because of flush_ioremap_region() */
 #else
 EXPORT_SYMBOL(cpu_cache);
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index def14ec265b3..7677a4a1cef2 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -2457,6 +2457,19 @@ static int __init omap_init_dma(void)
 		setup_irq(irq, &omap24xx_dma_irq);
 	}
 
+	/* Enable smartidle idlemodes and autoidle */
+	if (cpu_is_omap34xx()) {
+		u32 v = dma_read(OCP_SYSCONFIG);
+		v &= ~(DMA_SYSCONFIG_MIDLEMODE_MASK |
+				DMA_SYSCONFIG_SIDLEMODE_MASK |
+				DMA_SYSCONFIG_AUTOIDLE);
+		v |= (DMA_SYSCONFIG_MIDLEMODE(DMA_IDLEMODE_SMARTIDLE) |
+			DMA_SYSCONFIG_SIDLEMODE(DMA_IDLEMODE_SMARTIDLE) |
+			DMA_SYSCONFIG_AUTOIDLE);
+		dma_write(v , OCP_SYSCONFIG);
+	}
+
+
 	/* FIXME: Update LCD DMA to work on 24xx */
 	if (cpu_class_is_omap1()) {
 		r = request_irq(INT_DMA_LCD, lcd_dma_irq_handler, 0,
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index 7fd89ba8d3b5..26b387c12423 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -1585,6 +1585,7 @@ static int __init _omap_gpio_init(void)
 			__raw_writel(0x00000000, bank->base + OMAP24XX_GPIO_IRQENABLE1);
 			__raw_writel(0xffffffff, bank->base + OMAP24XX_GPIO_IRQSTATUS1);
 			__raw_writew(0x0015, bank->base + OMAP24XX_GPIO_SYSCONFIG);
+			__raw_writel(0x00000000, bank->base + OMAP24XX_GPIO_DEBOUNCE_EN);
 
 			/* Initialize interface clock ungated, module enabled */
 			__raw_writel(0, bank->base + OMAP24XX_GPIO_CTRL);
diff --git a/arch/arm/plat-omap/include/mach/cpu.h b/arch/arm/plat-omap/include/mach/cpu.h
index fc60c4ebcc28..285eaa3a8275 100644
--- a/arch/arm/plat-omap/include/mach/cpu.h
+++ b/arch/arm/plat-omap/include/mach/cpu.h
@@ -30,6 +30,17 @@
 #ifndef __ASM_ARCH_OMAP_CPU_H
 #define __ASM_ARCH_OMAP_CPU_H
 
+/*
+ * Omap device type i.e. EMU/HS/TST/GP/BAD
+ */
+#define OMAP2_DEVICE_TYPE_TEST		0
+#define OMAP2_DEVICE_TYPE_EMU		1
+#define OMAP2_DEVICE_TYPE_SEC		2
+#define OMAP2_DEVICE_TYPE_GP		3
+#define OMAP2_DEVICE_TYPE_BAD		4
+
+int omap_type(void);
+
 struct omap_chip_id {
 	u8 oc;
 	u8 type;
@@ -424,17 +435,6 @@ IS_OMAP_TYPE(3430, 0x3430)
 
 
 int omap_chip_is(struct omap_chip_id oci);
-int omap_type(void);
-
-/*
- * Macro to detect device type i.e. EMU/HS/TST/GP/BAD
- */
-#define OMAP2_DEVICE_TYPE_TEST		0
-#define OMAP2_DEVICE_TYPE_EMU		1
-#define OMAP2_DEVICE_TYPE_SEC		2
-#define OMAP2_DEVICE_TYPE_GP		3
-#define OMAP2_DEVICE_TYPE_BAD		4
-
 void omap2_check_revision(void);
 
 #endif    /* defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) */
diff --git a/arch/arm/plat-omap/include/mach/dma.h b/arch/arm/plat-omap/include/mach/dma.h
index 8c1eae88737e..7b939cc01962 100644
--- a/arch/arm/plat-omap/include/mach/dma.h
+++ b/arch/arm/plat-omap/include/mach/dma.h
@@ -389,6 +389,21 @@
 #define DMA_THREAD_FIFO_25		(0x02 << 14)
 #define DMA_THREAD_FIFO_50		(0x03 << 14)
 
+/* DMA4_OCP_SYSCONFIG bits */
+#define DMA_SYSCONFIG_MIDLEMODE_MASK		(3 << 12)
+#define DMA_SYSCONFIG_CLOCKACTIVITY_MASK	(3 << 8)
+#define DMA_SYSCONFIG_EMUFREE			(1 << 5)
+#define DMA_SYSCONFIG_SIDLEMODE_MASK		(3 << 3)
+#define DMA_SYSCONFIG_SOFTRESET			(1 << 2)
+#define DMA_SYSCONFIG_AUTOIDLE			(1 << 0)
+
+#define DMA_SYSCONFIG_MIDLEMODE(n)		((n) << 12)
+#define DMA_SYSCONFIG_SIDLEMODE(n)		((n) << 3)
+
+#define DMA_IDLEMODE_SMARTIDLE			0x2
+#define DMA_IDLEMODE_NO_IDLE			0x1
+#define DMA_IDLEMODE_FORCE_IDLE			0x0
+
 /* Chaining modes*/
 #ifndef CONFIG_ARCH_OMAP1
 #define OMAP_DMA_STATIC_CHAIN		0x1
diff --git a/arch/arm/plat-omap/include/mach/io.h b/arch/arm/plat-omap/include/mach/io.h
index 3b2814720569..73f483d56ca6 100644
--- a/arch/arm/plat-omap/include/mach/io.h
+++ b/arch/arm/plat-omap/include/mach/io.h
@@ -201,7 +201,7 @@
 #define OMAP2_IO_ADDRESS(pa)	IOMEM(__OMAP2_IO_ADDRESS(pa))
 
 #ifdef __ASSEMBLER__
-#define IOMEM(x)		x
+#define IOMEM(x)		(x)
 #else
 #define IOMEM(x)		((void __force __iomem *)(x))
 
diff --git a/arch/arm/plat-omap/iommu.c b/arch/arm/plat-omap/iommu.c
index 4cf449fa2cb5..4a0301399013 100644
--- a/arch/arm/plat-omap/iommu.c
+++ b/arch/arm/plat-omap/iommu.c
@@ -298,7 +298,7 @@ void flush_iotlb_page(struct iommu *obj, u32 da)
 		if ((start <= da) && (da < start + bytes)) {
 			dev_dbg(obj->dev, "%s: %08x<=%08x(%x)\n",
 				__func__, start, da, bytes);
-
+			iotlb_load_cr(obj, &cr);
 			iommu_write_reg(obj, 1, MMU_FLUSH_ENTRY);
 		}
 	}
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index 65006df3f1b7..4ea73804d21e 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -133,7 +133,12 @@ void __init omap_detect_sram(void)
 			if (cpu_is_omap34xx()) {
 				omap_sram_base = OMAP3_SRAM_PUB_VA;
 				omap_sram_start = OMAP3_SRAM_PUB_PA;
-				omap_sram_size = 0x8000; /* 32K */
+				if ((omap_type() == OMAP2_DEVICE_TYPE_EMU) ||
+				    (omap_type() == OMAP2_DEVICE_TYPE_SEC)) {
+					omap_sram_size = 0x7000; /* 28K */
+				} else {
+					omap_sram_size = 0x8000; /* 32K */
+				}
 			} else {
 				omap_sram_base = OMAP2_SRAM_PUB_VA;
 				omap_sram_start = OMAP2_SRAM_PUB_PA;
diff --git a/arch/arm/plat-s3c/Makefile b/arch/arm/plat-s3c/Makefile
index 74bb7cb5da49..0761766b1833 100644
--- a/arch/arm/plat-s3c/Makefile
+++ b/arch/arm/plat-s3c/Makefile
@@ -34,7 +34,7 @@ obj-$(CONFIG_S3C_DEV_HSMMC)	+= dev-hsmmc.o
 obj-$(CONFIG_S3C_DEV_HSMMC1)	+= dev-hsmmc1.o
 obj-y				+= dev-i2c0.o
 obj-$(CONFIG_S3C_DEV_I2C1)	+= dev-i2c1.o
-obj-$(CONFIG_SND_S3C24XX_SOC)	+= dev-audio.o
+obj-$(CONFIG_SND_S3C64XX_SOC_I2S)	+= dev-audio.o
 obj-$(CONFIG_S3C_DEV_FB)	+= dev-fb.o
 obj-$(CONFIG_S3C_DEV_USB_HOST)	+= dev-usb.o
 obj-$(CONFIG_S3C_DEV_USB_HSOTG)	+= dev-usb-hsotg.o
diff --git a/arch/arm/plat-s3c/include/plat/devs.h b/arch/arm/plat-s3c/include/plat/devs.h
index b5b9c4d46e9a..2e170827e0b0 100644
--- a/arch/arm/plat-s3c/include/plat/devs.h
+++ b/arch/arm/plat-s3c/include/plat/devs.h
@@ -37,6 +37,7 @@ extern struct platform_device s3c_device_i2c1;
 extern struct platform_device s3c_device_rtc;
 extern struct platform_device s3c_device_adc;
 extern struct platform_device s3c_device_sdi;
+extern struct platform_device s3c_device_iis;
 extern struct platform_device s3c_device_hwmon;
 extern struct platform_device s3c_device_hsmmc0;
 extern struct platform_device s3c_device_hsmmc1;
diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile
index 636cb12711df..579a165c2827 100644
--- a/arch/arm/plat-s3c24xx/Makefile
+++ b/arch/arm/plat-s3c24xx/Makefile
@@ -29,7 +29,7 @@ obj-$(CONFIG_PM_SIMTEC)		+= pm-simtec.o
 obj-$(CONFIG_PM)		+= pm.o
 obj-$(CONFIG_PM)		+= irq-pm.o
 obj-$(CONFIG_PM)		+= sleep.o
-obj-$(CONFIG_HAVE_PWM)		+= pwm.o
+obj-$(CONFIG_S3C24XX_PWM)	+= pwm.o
 obj-$(CONFIG_S3C2410_CLOCK)	+= s3c2410-clock.o
 obj-$(CONFIG_S3C2410_DMA)	+= dma.o
 obj-$(CONFIG_S3C24XX_ADC)	+= adc.o
diff --git a/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c b/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c
index 9edf7894eedd..da7a61728c18 100644
--- a/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c
+++ b/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c
@@ -12,8 +12,7 @@
 */
 
 #include <linux/kernel.h>
-
-#include <mach/hardware.h>
+#include <linux/gpio.h>
 
 #include <mach/spi.h>
 #include <mach/regs-gpio.h>
diff --git a/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c b/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c
index f34d0fc69ad8..86b9edc67413 100644
--- a/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c
+++ b/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c
@@ -12,8 +12,7 @@
 */
 
 #include <linux/kernel.h>
-
-#include <mach/hardware.h>
+#include <linux/gpio.h>
 
 #include <mach/spi.h>
 #include <mach/regs-gpio.h>
diff --git a/arch/arm/plat-stmp3xxx/pinmux.c b/arch/arm/plat-stmp3xxx/pinmux.c
index d41200382208..6d6b1a468eda 100644
--- a/arch/arm/plat-stmp3xxx/pinmux.c
+++ b/arch/arm/plat-stmp3xxx/pinmux.c
@@ -22,7 +22,6 @@
 #include <linux/sysdev.h>
 #include <linux/string.h>
 #include <linux/bitops.h>
-#include <linux/sysdev.h>
 #include <linux/irq.h>
 
 #include <mach/hardware.h>
diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types
index 33026eff2aa4..c8c55b469342 100644
--- a/arch/arm/tools/mach-types
+++ b/arch/arm/tools/mach-types
@@ -12,7 +12,7 @@
 #
 #   http://www.arm.linux.org.uk/developer/machines/?action=new
 #
-# Last update: Sat Jun 20 22:28:39 2009
+# Last update: Sat Sep 12 12:00:16 2009
 #
 # machine_is_xxx	CONFIG_xxxx		MACH_TYPE_xxx		number
 #
@@ -1769,7 +1769,7 @@ mx31cicada		MACH_MX31CICADA		MX31CICADA		1777
 mi424wr			MACH_MI424WR		MI424WR			1778
 axs_ultrax		MACH_AXS_ULTRAX		AXS_ULTRAX		1779
 at572d940deb		MACH_AT572D940DEB	AT572D940DEB		1780
-davinci_da8xx_evm	MACH_DAVINCI_DA8XX_EVM	DAVINCI_DA8XX_EVM	1781
+davinci_da830_evm	MACH_DAVINCI_DA830_EVM	DAVINCI_DA830_EVM	1781
 ep9302			MACH_EP9302		EP9302			1782
 at572d940hfek		MACH_AT572D940HFEB	AT572D940HFEB		1783
 cybook3			MACH_CYBOOK3		CYBOOK3			1784
@@ -1962,7 +1962,7 @@ ethernut5		MACH_ETHERNUT5		ETHERNUT5		1971
 arm11			MACH_ARM11		ARM11			1972
 cpuat9260		MACH_CPUAT9260		CPUAT9260		1973
 cpupxa255		MACH_CPUPXA255		CPUPXA255		1974
-cpuimx27		MACH_CPUIMX27		CPUIMX27		1975
+eukrea_cpuimx27		MACH_CPUIMX27		CPUIMX27		1975
 cheflux			MACH_CHEFLUX		CHEFLUX			1976
 eb_cpux9k2		MACH_EB_CPUX9K2		EB_CPUX9K2		1977
 opcotec			MACH_OPCOTEC		OPCOTEC			1978
@@ -2249,14 +2249,14 @@ omap3_phrazer		MACH_OMAP3_PHRAZER	OMAP3_PHRAZER		2261
 darwin			MACH_DARWIN		DARWIN			2262
 oratiscomu		MACH_ORATISCOMU		ORATISCOMU		2263
 rtsbc20			MACH_RTSBC20		RTSBC20			2264
-i780			MACH_I780		I780			2265
+sgh_i780		MACH_I780		I780			2265
 gemini324		MACH_GEMINI324		GEMINI324		2266
 oratislan		MACH_ORATISLAN		ORATISLAN		2267
 oratisalog		MACH_ORATISALOG		ORATISALOG		2268
 oratismadi		MACH_ORATISMADI		ORATISMADI		2269
 oratisot16		MACH_ORATISOT16		ORATISOT16		2270
 oratisdesk		MACH_ORATISDESK		ORATISDESK		2271
-v2p_ca9			MACH_V2P_CA9		V2P_CA9			2272
+v2_ca9			MACH_V2P_CA9		V2P_CA9			2272
 sintexo			MACH_SINTEXO		SINTEXO			2273
 cm3389			MACH_CM3389		CM3389			2274
 omap3_cio		MACH_OMAP3_CIO		OMAP3_CIO		2275
@@ -2280,3 +2280,132 @@ htcrhodium		MACH_HTCRHODIUM		HTCRHODIUM		2292
 htctopaz		MACH_HTCTOPAZ		HTCTOPAZ		2293
 matrix504		MACH_MATRIX504		MATRIX504		2294
 mrfsa			MACH_MRFSA		MRFSA			2295
+sc_p270			MACH_SC_P270		SC_P270			2296
+atlas5_evb		MACH_ATLAS5_EVB		ATLAS5_EVB		2297
+pelco_lobox		MACH_PELCO_LOBOX	PELCO_LOBOX		2298
+dilax_pcu200		MACH_DILAX_PCU200	DILAX_PCU200		2299
+leonardo		MACH_LEONARDO		LEONARDO		2300
+zoran_approach7		MACH_ZORAN_APPROACH7	ZORAN_APPROACH7		2301
+dp6xx			MACH_DP6XX		DP6XX			2302
+bcm2153_vesper		MACH_BCM2153_VESPER	BCM2153_VESPER		2303
+mahimahi		MACH_MAHIMAHI		MAHIMAHI		2304
+clickc			MACH_CLICKC		CLICKC			2305
+zb_gateway		MACH_ZB_GATEWAY		ZB_GATEWAY		2306
+tazcard			MACH_TAZCARD		TAZCARD			2307
+tazdev			MACH_TAZDEV		TAZDEV			2308
+annax_cb_arm		MACH_ANNAX_CB_ARM	ANNAX_CB_ARM		2309
+annax_dm3		MACH_ANNAX_DM3		ANNAX_DM3		2310
+cerebric		MACH_CEREBRIC		CEREBRIC		2311
+orca			MACH_ORCA		ORCA			2312
+pc9260			MACH_PC9260		PC9260			2313
+ems285a			MACH_EMS285A		EMS285A			2314
+gec2410			MACH_GEC2410		GEC2410			2315
+gec2440			MACH_GEC2440		GEC2440			2316
+mw903			MACH_ARCH_MW903		ARCH_MW903		2317
+mw2440			MACH_MW2440		MW2440			2318
+ecac2378		MACH_ECAC2378		ECAC2378		2319
+tazkiosk		MACH_TAZKIOSK		TAZKIOSK		2320
+whiterabbit_mch		MACH_WHITERABBIT_MCH	WHITERABBIT_MCH		2321
+sbox9263		MACH_SBOX9263		SBOX9263		2322
+oreo			MACH_OREO		OREO			2323
+smdk6442		MACH_SMDK6442		SMDK6442		2324
+openrd_base		MACH_OPENRD_BASE	OPENRD_BASE		2325
+incredible		MACH_INCREDIBLE		INCREDIBLE		2326
+incrediblec		MACH_INCREDIBLEC	INCREDIBLEC		2327
+heroct			MACH_HEROCT		HEROCT			2328
+mmnet1000		MACH_MMNET1000		MMNET1000		2329
+devkit8000		MACH_DEVKIT8000		DEVKIT8000		2330
+devkit9000		MACH_DEVKIT9000		DEVKIT9000		2331
+mx31txtr		MACH_MX31TXTR		MX31TXTR		2332
+u380			MACH_U380		U380			2333
+oamp3_hualu		MACH_HUALU_BOARD	HUALU_BOARD		2334
+npcmx50			MACH_NPCMX50		NPCMX50			2335
+mx51_lange51		MACH_MX51_LANGE51	MX51_LANGE51		2336
+mx51_lange52		MACH_MX51_LANGE52	MX51_LANGE52		2337
+riom			MACH_RIOM		RIOM			2338
+comcas			MACH_COMCAS		COMCAS			2339
+wsi_mx27		MACH_WSI_MX27		WSI_MX27		2340
+cm_t35			MACH_CM_T35		CM_T35			2341
+net2big			MACH_NET2BIG		NET2BIG			2342
+motorola_a1600		MACH_MOTOROLA_A1600	MOTOROLA_A1600		2343
+igep0020		MACH_IGEP0020		IGEP0020		2344
+igep0010		MACH_IGEP0010		IGEP0010		2345
+mv6281gtwge2		MACH_MV6281GTWGE2	MV6281GTWGE2		2346
+scat100			MACH_SCAT100		SCAT100			2347
+sanmina			MACH_SANMINA		SANMINA			2348
+momento			MACH_MOMENTO		MOMENTO			2349
+nuc9xx			MACH_NUC9XX		NUC9XX			2350
+nuc910evb		MACH_NUC910EVB		NUC910EVB		2351
+nuc920evb		MACH_NUC920EVB		NUC920EVB		2352
+nuc950evb		MACH_NUC950EVB		NUC950EVB		2353
+nuc945evb		MACH_NUC945EVB		NUC945EVB		2354
+nuc960evb		MACH_NUC960EVB		NUC960EVB		2355
+nuc932evb		MACH_NUC932EVB		NUC932EVB		2356
+nuc900			MACH_NUC900		NUC900			2357
+sd1soc			MACH_SD1SOC		SD1SOC			2358
+ln2440bc		MACH_LN2440BC		LN2440BC		2359
+rsbc			MACH_RSBC		RSBC			2360
+openrd_client		MACH_OPENRD_CLIENT	OPENRD_CLIENT		2361
+hpipaq11x		MACH_HPIPAQ11X		HPIPAQ11X		2362
+wayland			MACH_WAYLAND		WAYLAND			2363
+acnbsx102		MACH_ACNBSX102		ACNBSX102		2364
+hwat91			MACH_HWAT91		HWAT91			2365
+at91sam9263cs		MACH_AT91SAM9263CS	AT91SAM9263CS		2366
+csb732			MACH_CSB732		CSB732			2367
+u8500			MACH_U8500		U8500			2368
+huqiu			MACH_HUQIU		HUQIU			2369
+mx51_kunlun		MACH_MX51_KUNLUN	MX51_KUNLUN		2370
+pmt1g			MACH_PMT1G		PMT1G			2371
+htcelf			MACH_HTCELF		HTCELF			2372
+armadillo420		MACH_ARMADILLO420	ARMADILLO420		2373
+armadillo440		MACH_ARMADILLO440	ARMADILLO440		2374
+u_chip_dual_arm		MACH_U_CHIP_DUAL_ARM	U_CHIP_DUAL_ARM		2375
+csr_bdb3		MACH_CSR_BDB3		CSR_BDB3		2376
+dolby_cat1018		MACH_DOLBY_CAT1018	DOLBY_CAT1018		2377
+hy9307			MACH_HY9307		HY9307			2378
+aspire_easystore	MACH_A_ES		A_ES			2379
+davinci_irif		MACH_DAVINCI_IRIF	DAVINCI_IRIF		2380
+agama9263		MACH_AGAMA9263		AGAMA9263		2381
+marvell_jasper		MACH_MARVELL_JASPER	MARVELL_JASPER		2382
+flint			MACH_FLINT		FLINT			2383
+tavorevb3		MACH_TAVOREVB3		TAVOREVB3		2384
+sch_m490		MACH_SCH_M490		SCH_M490		2386
+rbl01			MACH_RBL01		RBL01			2387
+omnifi			MACH_OMNIFI		OMNIFI			2388
+otavalo			MACH_OTAVALO		OTAVALO			2389
+sienna			MACH_SIENNA		SIENNA			2390
+htc_excalibur_s620	MACH_HTC_EXCALIBUR_S620	HTC_EXCALIBUR_S620	2391
+htc_opal		MACH_HTC_OPAL		HTC_OPAL		2392
+touchbook		MACH_TOUCHBOOK		TOUCHBOOK		2393
+latte			MACH_LATTE		LATTE			2394
+xa200			MACH_XA200		XA200			2395
+nimrod			MACH_NIMROD		NIMROD			2396
+cc9p9215_3g		MACH_CC9P9215_3G	CC9P9215_3G		2397
+cc9p9215_3gjs		MACH_CC9P9215_3GJS	CC9P9215_3GJS		2398
+tk71			MACH_TK71		TK71			2399
+comham3525		MACH_COMHAM3525		COMHAM3525		2400
+mx31erebus		MACH_MX31EREBUS		MX31EREBUS		2401
+mcardmx27		MACH_MCARDMX27		MCARDMX27		2402
+paradise		MACH_PARADISE		PARADISE		2403
+tide			MACH_TIDE		TIDE			2404
+wzl2440			MACH_WZL2440		WZL2440			2405
+sdrdemo			MACH_SDRDEMO		SDRDEMO			2406
+ethercan2		MACH_ETHERCAN2		ETHERCAN2		2407
+ecmimg20		MACH_ECMIMG20		ECMIMG20		2408
+omap_dragon		MACH_OMAP_DRAGON	OMAP_DRAGON		2409
+halo			MACH_HALO		HALO			2410
+huangshan		MACH_HUANGSHAN		HUANGSHAN		2411
+vl_ma2sc		MACH_VL_MA2SC		VL_MA2SC		2412
+raumfeld_rc		MACH_RAUMFELD_RC	RAUMFELD_RC		2413
+raumfeld_connector	MACH_RAUMFELD_CONNECTOR	RAUMFELD_CONNECTOR	2414
+raumfeld_speaker	MACH_RAUMFELD_SPEAKER	RAUMFELD_SPEAKER	2415
+multibus_master		MACH_MULTIBUS_MASTER	MULTIBUS_MASTER		2416
+multibus_pbk		MACH_MULTIBUS_PBK	MULTIBUS_PBK		2417
+tnetv107x		MACH_TNETV107X		TNETV107X		2418
+snake			MACH_SNAKE		SNAKE			2419
+cwmx27			MACH_CWMX27		CWMX27			2420
+sch_m480		MACH_SCH_M480		SCH_M480		2421
+platypus		MACH_PLATYPUS		PLATYPUS		2422
+pss2			MACH_PSS2		PSS2			2423
+davinci_apm150		MACH_DAVINCI_APM150	DAVINCI_APM150		2424
+str9100			MACH_STR9100		STR9100			2425
diff --git a/arch/avr32/include/asm/thread_info.h b/arch/avr32/include/asm/thread_info.h
index 4442f8d2d423..fc42de5ca209 100644
--- a/arch/avr32/include/asm/thread_info.h
+++ b/arch/avr32/include/asm/thread_info.h
@@ -40,7 +40,7 @@ struct thread_info {
 	.exec_domain	= &default_exec_domain,				\
 	.flags		= 0,						\
 	.cpu		= 0,						\
-	.preempt_count	= 1,						\
+	.preempt_count	= INIT_PREEMPT_COUNT,				\
 	.restart_block	= {						\
 		.fn	= do_no_restart_syscall				\
 	}								\
diff --git a/arch/avr32/kernel/traps.c b/arch/avr32/kernel/traps.c
index 6e3d491184ea..b91b2044af9c 100644
--- a/arch/avr32/kernel/traps.c
+++ b/arch/avr32/kernel/traps.c
@@ -32,22 +32,25 @@ void NORET_TYPE die(const char *str, struct pt_regs *regs, long err)
 	spin_lock_irq(&die_lock);
 	bust_spinlocks(1);
 
-	printk(KERN_ALERT "Oops: %s, sig: %ld [#%d]\n" KERN_EMERG,
+	printk(KERN_ALERT "Oops: %s, sig: %ld [#%d]\n",
 	       str, err, ++die_counter);
+
+	printk(KERN_EMERG);
+
 #ifdef CONFIG_PREEMPT
-	printk("PREEMPT ");
+	printk(KERN_CONT "PREEMPT ");
 #endif
 #ifdef CONFIG_FRAME_POINTER
-	printk("FRAME_POINTER ");
+	printk(KERN_CONT "FRAME_POINTER ");
 #endif
 	if (current_cpu_data.features & AVR32_FEATURE_OCD) {
 		unsigned long did = ocd_read(DID);
-		printk("chip: 0x%03lx:0x%04lx rev %lu\n",
+		printk(KERN_CONT "chip: 0x%03lx:0x%04lx rev %lu\n",
 		       (did >> 1) & 0x7ff,
 		       (did >> 12) & 0x7fff,
 		       (did >> 28) & 0xf);
 	} else {
-		printk("cpu: arch %u r%u / core %u r%u\n",
+		printk(KERN_CONT "cpu: arch %u r%u / core %u r%u\n",
 		       current_cpu_data.arch_type,
 		       current_cpu_data.arch_revision,
 		       current_cpu_data.cpu_type,
diff --git a/arch/blackfin/include/asm/thread_info.h b/arch/blackfin/include/asm/thread_info.h
index 2920087516f2..2bbfdd950afc 100644
--- a/arch/blackfin/include/asm/thread_info.h
+++ b/arch/blackfin/include/asm/thread_info.h
@@ -77,7 +77,7 @@ struct thread_info {
 	.exec_domain	= &default_exec_domain,	\
 	.flags		= 0,			\
 	.cpu		= 0,			\
-	.preempt_count  = 1,                    \
+	.preempt_count  = INIT_PREEMPT_COUNT,   \
 	.restart_block	= {			\
 		.fn = do_no_restart_syscall,	\
 	},					\
diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c
index 298f023bcc09..6136c33e919f 100644
--- a/arch/blackfin/kernel/setup.c
+++ b/arch/blackfin/kernel/setup.c
@@ -408,13 +408,14 @@ static void __init print_memory_map(char *who)
 			bfin_memmap.map[i].addr + bfin_memmap.map[i].size);
 		switch (bfin_memmap.map[i].type) {
 		case BFIN_MEMMAP_RAM:
-				printk("(usable)\n");
-				break;
+			printk(KERN_CONT "(usable)\n");
+			break;
 		case BFIN_MEMMAP_RESERVED:
-				printk("(reserved)\n");
-				break;
-		default:	printk("type %lu\n", bfin_memmap.map[i].type);
-				break;
+			printk(KERN_CONT "(reserved)\n");
+			break;
+		default:
+			printk(KERN_CONT "type %lu\n", bfin_memmap.map[i].type);
+			break;
 		}
 	}
 }
@@ -614,19 +615,19 @@ static __init void memory_setup(void)
 	printk(KERN_INFO "Kernel Managed Memory: %ldMB\n", _ramend >> 20);
 
 	printk(KERN_INFO "Memory map:\n"
-		KERN_INFO "  fixedcode = 0x%p-0x%p\n"
-		KERN_INFO "  text      = 0x%p-0x%p\n"
-		KERN_INFO "  rodata    = 0x%p-0x%p\n"
-		KERN_INFO "  bss       = 0x%p-0x%p\n"
-		KERN_INFO "  data      = 0x%p-0x%p\n"
-		KERN_INFO "    stack   = 0x%p-0x%p\n"
-		KERN_INFO "  init      = 0x%p-0x%p\n"
-		KERN_INFO "  available = 0x%p-0x%p\n"
+	       "  fixedcode = 0x%p-0x%p\n"
+	       "  text      = 0x%p-0x%p\n"
+	       "  rodata    = 0x%p-0x%p\n"
+	       "  bss       = 0x%p-0x%p\n"
+	       "  data      = 0x%p-0x%p\n"
+	       "    stack   = 0x%p-0x%p\n"
+	       "  init      = 0x%p-0x%p\n"
+	       "  available = 0x%p-0x%p\n"
 #ifdef CONFIG_MTD_UCLINUX
-		KERN_INFO "  rootfs    = 0x%p-0x%p\n"
+	       "  rootfs    = 0x%p-0x%p\n"
 #endif
 #if DMA_UNCACHED_REGION > 0
-		KERN_INFO "  DMA Zone  = 0x%p-0x%p\n"
+	       "  DMA Zone  = 0x%p-0x%p\n"
 #endif
 		, (void *)FIXED_CODE_START, (void *)FIXED_CODE_END,
 		_stext, _etext,
@@ -859,13 +860,13 @@ void __init setup_arch(char **cmdline_p)
 #endif
 	printk(KERN_INFO "Hardware Trace ");
 	if (bfin_read_TBUFCTL() & 0x1)
-		printk("Active ");
+		printk(KERN_CONT "Active ");
 	else
-		printk("Off ");
+		printk(KERN_CONT "Off ");
 	if (bfin_read_TBUFCTL() & 0x2)
-		printk("and Enabled\n");
+		printk(KERN_CONT "and Enabled\n");
 	else
-	printk("and Disabled\n");
+		printk(KERN_CONT "and Disabled\n");
 
 #if defined(CONFIG_CHR_DEV_FLASH) || defined(CONFIG_BLK_DEV_FLASH)
 	/* we need to initialize the Flashrom device here since we might
diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c
index 8eeb457ce5d5..8a1caf2bb5b9 100644
--- a/arch/blackfin/kernel/traps.c
+++ b/arch/blackfin/kernel/traps.c
@@ -212,7 +212,7 @@ asmlinkage void double_fault_c(struct pt_regs *fp)
 	console_verbose();
 	oops_in_progress = 1;
 #ifdef CONFIG_DEBUG_VERBOSE
-	printk(KERN_EMERG "\n" KERN_EMERG "Double Fault\n");
+	printk(KERN_EMERG "Double Fault\n");
 #ifdef CONFIG_DEBUG_DOUBLEFAULT_PRINT
 	if (((long)fp->seqstat &  SEQSTAT_EXCAUSE) == VEC_UNCOV) {
 		unsigned int cpu = smp_processor_id();
@@ -583,15 +583,14 @@ asmlinkage void trap_c(struct pt_regs *fp)
 #ifndef CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE
 		if (trapnr == VEC_CPLB_I_M || trapnr == VEC_CPLB_M)
 			verbose_printk(KERN_NOTICE "No trace since you do not have "
-				"CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE enabled\n"
-				KERN_NOTICE "\n");
+			       "CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE enabled\n\n");
 		else
 #endif
 			dump_bfin_trace_buffer();
 
 		if (oops_in_progress) {
 			/* Dump the current kernel stack */
-			verbose_printk(KERN_NOTICE "\n" KERN_NOTICE "Kernel Stack\n");
+			verbose_printk(KERN_NOTICE "Kernel Stack\n");
 			show_stack(current, NULL);
 			print_modules();
 #ifndef CONFIG_ACCESS_CHECK
@@ -906,7 +905,7 @@ void show_stack(struct task_struct *task, unsigned long *stack)
 
 			ret_addr = 0;
 			if (!j && i % 8 == 0)
-				printk("\n" KERN_NOTICE "%p:",addr);
+				printk(KERN_NOTICE "%p:",addr);
 
 			/* if it is an odd address, or zero, just skip it */
 			if (*addr & 0x1 || !*addr)
@@ -996,9 +995,9 @@ void dump_bfin_process(struct pt_regs *fp)
 
 		printk(KERN_NOTICE "CPU = %d\n", current_thread_info()->cpu);
 		if (!((unsigned long)current->mm & 0x3) && (unsigned long)current->mm >= FIXED_CODE_START)
-			verbose_printk(KERN_NOTICE  "TEXT = 0x%p-0x%p        DATA = 0x%p-0x%p\n"
-				KERN_NOTICE " BSS = 0x%p-0x%p  USER-STACK = 0x%p\n"
-				KERN_NOTICE "\n",
+			verbose_printk(KERN_NOTICE
+				"TEXT = 0x%p-0x%p        DATA = 0x%p-0x%p\n"
+				" BSS = 0x%p-0x%p  USER-STACK = 0x%p\n\n",
 				(void *)current->mm->start_code,
 				(void *)current->mm->end_code,
 				(void *)current->mm->start_data,
@@ -1009,8 +1008,8 @@ void dump_bfin_process(struct pt_regs *fp)
 		else
 			verbose_printk(KERN_NOTICE "invalid mm\n");
 	} else
-		verbose_printk(KERN_NOTICE "\n" KERN_NOTICE
-		     "No Valid process in current context\n");
+		verbose_printk(KERN_NOTICE
+			       "No Valid process in current context\n");
 #endif
 }
 
@@ -1028,7 +1027,7 @@ void dump_bfin_mem(struct pt_regs *fp)
 	     addr < (unsigned short *)((unsigned long)erraddr & ~0xF) + 0x10;
 	     addr++) {
 		if (!((unsigned long)addr & 0xF))
-			verbose_printk("\n" KERN_NOTICE "0x%p: ", addr);
+			verbose_printk(KERN_NOTICE "0x%p: ", addr);
 
 		if (!get_instruction(&val, addr)) {
 				val = 0;
@@ -1056,9 +1055,9 @@ void dump_bfin_mem(struct pt_regs *fp)
 	    oops_in_progress)){
 		verbose_printk(KERN_NOTICE "Looks like this was a deferred error - sorry\n");
 #ifndef CONFIG_DEBUG_HWERR
-		verbose_printk(KERN_NOTICE "The remaining message may be meaningless\n"
-			KERN_NOTICE "You should enable CONFIG_DEBUG_HWERR to get a"
-			 " better idea where it came from\n");
+		verbose_printk(KERN_NOTICE
+"The remaining message may be meaningless\n"
+"You should enable CONFIG_DEBUG_HWERR to get a better idea where it came from\n");
 #else
 		/* If we are handling only one peripheral interrupt
 		 * and current mm and pid are valid, and the last error
@@ -1114,9 +1113,10 @@ void show_regs(struct pt_regs *fp)
 
 	verbose_printk(KERN_NOTICE "%s", linux_banner);
 
-	verbose_printk(KERN_NOTICE "\n" KERN_NOTICE "SEQUENCER STATUS:\t\t%s\n", print_tainted());
+	verbose_printk(KERN_NOTICE "\nSEQUENCER STATUS:\t\t%s\n",
+		       print_tainted());
 	verbose_printk(KERN_NOTICE " SEQSTAT: %08lx  IPEND: %04lx  SYSCFG: %04lx\n",
-		(long)fp->seqstat, fp->ipend, fp->syscfg);
+		       (long)fp->seqstat, fp->ipend, fp->syscfg);
 	if ((fp->seqstat & SEQSTAT_EXCAUSE) == VEC_HWERR) {
 		verbose_printk(KERN_NOTICE "  HWERRCAUSE: 0x%lx\n",
 			(fp->seqstat & SEQSTAT_HWERRCAUSE) >> 14);
@@ -1184,7 +1184,7 @@ unlock:
 		verbose_printk(KERN_NOTICE "ICPLB_FAULT_ADDR: %s\n", buf);
 	}
 
-	verbose_printk(KERN_NOTICE "\n" KERN_NOTICE "PROCESSOR STATE:\n");
+	verbose_printk(KERN_NOTICE "PROCESSOR STATE:\n");
 	verbose_printk(KERN_NOTICE " R0 : %08lx    R1 : %08lx    R2 : %08lx    R3 : %08lx\n",
 		fp->r0, fp->r1, fp->r2, fp->r3);
 	verbose_printk(KERN_NOTICE " R4 : %08lx    R5 : %08lx    R6 : %08lx    R7 : %08lx\n",
diff --git a/arch/cris/include/asm/thread_info.h b/arch/cris/include/asm/thread_info.h
index bc5b2935ca53..c3aade36c330 100644
--- a/arch/cris/include/asm/thread_info.h
+++ b/arch/cris/include/asm/thread_info.h
@@ -50,8 +50,6 @@ struct thread_info {
 
 /*
  * macros/functions for gaining access to the thread information structure
- *
- * preempt_count needs to be 1 initially, until the scheduler is functional.
  */
 #ifndef __ASSEMBLY__
 #define INIT_THREAD_INFO(tsk)				\
@@ -60,7 +58,7 @@ struct thread_info {
 	.exec_domain	= &default_exec_domain,		\
 	.flags		= 0,				\
 	.cpu		= 0,				\
-	.preempt_count	= 1,				\
+	.preempt_count	= INIT_PREEMPT_COUNT,		\
 	.addr_limit	= KERNEL_DS,			\
 	.restart_block = {				\
 		       .fn = do_no_restart_syscall,	\
diff --git a/arch/frv/Kconfig b/arch/frv/Kconfig
index 8a5bd7a9c6f5..b86e19c9b5b0 100644
--- a/arch/frv/Kconfig
+++ b/arch/frv/Kconfig
@@ -7,6 +7,7 @@ config FRV
 	default y
 	select HAVE_IDE
 	select HAVE_ARCH_TRACEHOOK
+	select HAVE_PERF_COUNTERS
 
 config ZONE_DMA
 	bool
diff --git a/arch/frv/include/asm/atomic.h b/arch/frv/include/asm/atomic.h
index 0409d981fd39..00a57af79afc 100644
--- a/arch/frv/include/asm/atomic.h
+++ b/arch/frv/include/asm/atomic.h
@@ -121,10 +121,72 @@ static inline void atomic_dec(atomic_t *v)
 #define atomic_dec_and_test(v)		(atomic_sub_return(1, (v)) == 0)
 #define atomic_inc_and_test(v)		(atomic_add_return(1, (v)) == 0)
 
+/*
+ * 64-bit atomic ops
+ */
+typedef struct {
+	volatile long long counter;
+} atomic64_t;
+
+#define ATOMIC64_INIT(i)	{ (i) }
+
+static inline long long atomic64_read(atomic64_t *v)
+{
+	long long counter;
+
+	asm("ldd%I1 %M1,%0"
+	    : "=e"(counter)
+	    : "m"(v->counter));
+	return counter;
+}
+
+static inline void atomic64_set(atomic64_t *v, long long i)
+{
+	asm volatile("std%I0 %1,%M0"
+		     : "=m"(v->counter)
+		     : "e"(i));
+}
+
+extern long long atomic64_inc_return(atomic64_t *v);
+extern long long atomic64_dec_return(atomic64_t *v);
+extern long long atomic64_add_return(long long i, atomic64_t *v);
+extern long long atomic64_sub_return(long long i, atomic64_t *v);
+
+static inline long long atomic64_add_negative(long long i, atomic64_t *v)
+{
+	return atomic64_add_return(i, v) < 0;
+}
+
+static inline void atomic64_add(long long i, atomic64_t *v)
+{
+	atomic64_add_return(i, v);
+}
+
+static inline void atomic64_sub(long long i, atomic64_t *v)
+{
+	atomic64_sub_return(i, v);
+}
+
+static inline void atomic64_inc(atomic64_t *v)
+{
+	atomic64_inc_return(v);
+}
+
+static inline void atomic64_dec(atomic64_t *v)
+{
+	atomic64_dec_return(v);
+}
+
+#define atomic64_sub_and_test(i,v)	(atomic64_sub_return((i), (v)) == 0)
+#define atomic64_dec_and_test(v)	(atomic64_dec_return((v)) == 0)
+#define atomic64_inc_and_test(v)	(atomic64_inc_return((v)) == 0)
+
 /*****************************************************************************/
 /*
  * exchange value with memory
  */
+extern uint64_t __xchg_64(uint64_t i, volatile void *v);
+
 #ifndef CONFIG_FRV_OUTOFLINE_ATOMIC_OPS
 
 #define xchg(ptr, x)								\
@@ -174,8 +236,10 @@ extern uint32_t __xchg_32(uint32_t i, volatile void *v);
 
 #define tas(ptr) (xchg((ptr), 1))
 
-#define atomic_cmpxchg(v, old, new) (cmpxchg(&((v)->counter), old, new))
-#define atomic_xchg(v, new) (xchg(&((v)->counter), new))
+#define atomic_cmpxchg(v, old, new)	(cmpxchg(&(v)->counter, old, new))
+#define atomic_xchg(v, new)		(xchg(&(v)->counter, new))
+#define atomic64_cmpxchg(v, old, new)	(__cmpxchg_64(old, new, &(v)->counter))
+#define atomic64_xchg(v, new)		(__xchg_64(new, &(v)->counter))
 
 static __inline__ int atomic_add_unless(atomic_t *v, int a, int u)
 {
diff --git a/arch/frv/include/asm/perf_counter.h b/arch/frv/include/asm/perf_counter.h
new file mode 100644
index 000000000000..ccf726e61b2e
--- /dev/null
+++ b/arch/frv/include/asm/perf_counter.h
@@ -0,0 +1,17 @@
+/* FRV performance counter support
+ *
+ * Copyright (C) 2009 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_PERF_COUNTER_H
+#define _ASM_PERF_COUNTER_H
+
+#define PERF_COUNTER_INDEX_OFFSET	0
+
+#endif /* _ASM_PERF_COUNTER_H */
diff --git a/arch/frv/include/asm/system.h b/arch/frv/include/asm/system.h
index 7742ec000cc4..efd22d9077ac 100644
--- a/arch/frv/include/asm/system.h
+++ b/arch/frv/include/asm/system.h
@@ -208,6 +208,8 @@ extern void free_initmem(void);
  * - if (*ptr == test) then orig = *ptr; *ptr = test;
  * - if (*ptr != test) then orig = *ptr;
  */
+extern uint64_t __cmpxchg_64(uint64_t test, uint64_t new, volatile uint64_t *v);
+
 #ifndef CONFIG_FRV_OUTOFLINE_ATOMIC_OPS
 
 #define cmpxchg(ptr, test, new)							\
diff --git a/arch/frv/include/asm/thread_info.h b/arch/frv/include/asm/thread_info.h
index e8a5ed7be021..e608e056bb53 100644
--- a/arch/frv/include/asm/thread_info.h
+++ b/arch/frv/include/asm/thread_info.h
@@ -56,8 +56,6 @@ struct thread_info {
 
 /*
  * macros/functions for gaining access to the thread information structure
- *
- * preempt_count needs to be 1 initially, until the scheduler is functional.
  */
 #ifndef __ASSEMBLY__
 
@@ -67,7 +65,7 @@ struct thread_info {
 	.exec_domain	= &default_exec_domain,	\
 	.flags		= 0,			\
 	.cpu		= 0,			\
-	.preempt_count	= 1,			\
+	.preempt_count	= INIT_PREEMPT_COUNT,	\
 	.addr_limit	= KERNEL_DS,		\
 	.restart_block = {			\
 		.fn = do_no_restart_syscall,	\
diff --git a/arch/frv/include/asm/unistd.h b/arch/frv/include/asm/unistd.h
index 96d78d5d2c41..4a8fb427ce0a 100644
--- a/arch/frv/include/asm/unistd.h
+++ b/arch/frv/include/asm/unistd.h
@@ -341,10 +341,12 @@
 #define __NR_inotify_init1	332
 #define __NR_preadv		333
 #define __NR_pwritev		334
+#define __NR_rt_tgsigqueueinfo	335
+#define __NR_perf_counter_open	336
 
 #ifdef __KERNEL__
 
-#define NR_syscalls 335
+#define NR_syscalls 337
 
 #define __ARCH_WANT_IPC_PARSE_VERSION
 /* #define __ARCH_WANT_OLD_READDIR */
diff --git a/arch/frv/kernel/entry.S b/arch/frv/kernel/entry.S
index 356e0e327a89..fde1e446b440 100644
--- a/arch/frv/kernel/entry.S
+++ b/arch/frv/kernel/entry.S
@@ -1524,5 +1524,7 @@ sys_call_table:
 	.long sys_inotify_init1
 	.long sys_preadv
 	.long sys_pwritev
+	.long sys_rt_tgsigqueueinfo	/* 335 */
+	.long sys_perf_counter_open
 
 syscall_table_size = (. - sys_call_table)
diff --git a/arch/frv/kernel/frv_ksyms.c b/arch/frv/kernel/frv_ksyms.c
index 0316b3c50eff..a89803b58b9a 100644
--- a/arch/frv/kernel/frv_ksyms.c
+++ b/arch/frv/kernel/frv_ksyms.c
@@ -67,6 +67,10 @@ EXPORT_SYMBOL(atomic_sub_return);
 EXPORT_SYMBOL(__xchg_32);
 EXPORT_SYMBOL(__cmpxchg_32);
 #endif
+EXPORT_SYMBOL(atomic64_add_return);
+EXPORT_SYMBOL(atomic64_sub_return);
+EXPORT_SYMBOL(__xchg_64);
+EXPORT_SYMBOL(__cmpxchg_64);
 
 EXPORT_SYMBOL(__debug_bug_printk);
 EXPORT_SYMBOL(__delay_loops_MHz);
diff --git a/arch/frv/lib/Makefile b/arch/frv/lib/Makefile
index 08be305c9f44..0a377210c89b 100644
--- a/arch/frv/lib/Makefile
+++ b/arch/frv/lib/Makefile
@@ -4,5 +4,5 @@
 
 lib-y := \
 	__ashldi3.o __lshrdi3.o __muldi3.o __ashrdi3.o __negdi2.o __ucmpdi2.o \
-	checksum.o memcpy.o memset.o atomic-ops.o \
-	outsl_ns.o outsl_sw.o insl_ns.o insl_sw.o cache.o
+	checksum.o memcpy.o memset.o atomic-ops.o atomic64-ops.o \
+	outsl_ns.o outsl_sw.o insl_ns.o insl_sw.o cache.o perf_counter.o
diff --git a/arch/frv/lib/atomic-ops.S b/arch/frv/lib/atomic-ops.S
index ee0ac905fb08..5e9e6ab5dd0e 100644
--- a/arch/frv/lib/atomic-ops.S
+++ b/arch/frv/lib/atomic-ops.S
@@ -163,11 +163,10 @@ __cmpxchg_32:
 	ld.p		@(gr11,gr0),gr8
 	orcr		cc7,cc7,cc3
 	subcc		gr8,gr9,gr7,icc0
-	bne		icc0,#0,1f
+	bnelr		icc0,#0
 	cst.p		gr10,@(gr11,gr0)	,cc3,#1
 	corcc		gr29,gr29,gr0		,cc3,#1
 	beq		icc3,#0,0b
-1:
 	bralr
 
 	.size		__cmpxchg_32, .-__cmpxchg_32
diff --git a/arch/frv/lib/atomic64-ops.S b/arch/frv/lib/atomic64-ops.S
new file mode 100644
index 000000000000..b6194eeac127
--- /dev/null
+++ b/arch/frv/lib/atomic64-ops.S
@@ -0,0 +1,162 @@
+/* kernel atomic64 operations
+ *
+ * For an explanation of how atomic ops work in this arch, see:
+ *   Documentation/frv/atomic-ops.txt
+ *
+ * Copyright (C) 2009 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <asm/spr-regs.h>
+
+	.text
+	.balign 4
+
+
+###############################################################################
+#
+# long long atomic64_inc_return(atomic64_t *v)
+#
+###############################################################################
+	.globl		atomic64_inc_return
+        .type		atomic64_inc_return,@function
+atomic64_inc_return:
+	or.p		gr8,gr8,gr10
+0:
+	orcc		gr0,gr0,gr0,icc3		/* set ICC3.Z */
+	ckeq		icc3,cc7
+	ldd.p		@(gr10,gr0),gr8			/* LDD.P/ORCR must be atomic */
+	orcr		cc7,cc7,cc3			/* set CC3 to true */
+	addicc		gr9,#1,gr9,icc0
+	addxi		gr8,#0,gr8,icc0
+	cstd.p		gr8,@(gr10,gr0)		,cc3,#1
+	corcc		gr29,gr29,gr0		,cc3,#1	/* clear ICC3.Z if store happens */
+	beq		icc3,#0,0b
+	bralr
+
+	.size		atomic64_inc_return, .-atomic64_inc_return
+
+###############################################################################
+#
+# long long atomic64_dec_return(atomic64_t *v)
+#
+###############################################################################
+	.globl		atomic64_dec_return
+        .type		atomic64_dec_return,@function
+atomic64_dec_return:
+	or.p		gr8,gr8,gr10
+0:
+	orcc		gr0,gr0,gr0,icc3		/* set ICC3.Z */
+	ckeq		icc3,cc7
+	ldd.p		@(gr10,gr0),gr8			/* LDD.P/ORCR must be atomic */
+	orcr		cc7,cc7,cc3			/* set CC3 to true */
+	subicc		gr9,#1,gr9,icc0
+	subxi		gr8,#0,gr8,icc0
+	cstd.p		gr8,@(gr10,gr0)		,cc3,#1
+	corcc		gr29,gr29,gr0		,cc3,#1	/* clear ICC3.Z if store happens */
+	beq		icc3,#0,0b
+	bralr
+
+	.size		atomic64_dec_return, .-atomic64_dec_return
+
+###############################################################################
+#
+# long long atomic64_add_return(long long i, atomic64_t *v)
+#
+###############################################################################
+	.globl		atomic64_add_return
+        .type		atomic64_add_return,@function
+atomic64_add_return:
+	or.p		gr8,gr8,gr4
+	or		gr9,gr9,gr5
+0:
+	orcc		gr0,gr0,gr0,icc3		/* set ICC3.Z */
+	ckeq		icc3,cc7
+	ldd.p		@(gr10,gr0),gr8			/* LDD.P/ORCR must be atomic */
+	orcr		cc7,cc7,cc3			/* set CC3 to true */
+	addcc		gr9,gr5,gr9,icc0
+	addx		gr8,gr4,gr8,icc0
+	cstd.p		gr8,@(gr10,gr0)		,cc3,#1
+	corcc		gr29,gr29,gr0		,cc3,#1	/* clear ICC3.Z if store happens */
+	beq		icc3,#0,0b
+	bralr
+
+	.size		atomic64_add_return, .-atomic64_add_return
+
+###############################################################################
+#
+# long long atomic64_sub_return(long long i, atomic64_t *v)
+#
+###############################################################################
+	.globl		atomic64_sub_return
+        .type		atomic64_sub_return,@function
+atomic64_sub_return:
+	or.p		gr8,gr8,gr4
+	or		gr9,gr9,gr5
+0:
+	orcc		gr0,gr0,gr0,icc3		/* set ICC3.Z */
+	ckeq		icc3,cc7
+	ldd.p		@(gr10,gr0),gr8			/* LDD.P/ORCR must be atomic */
+	orcr		cc7,cc7,cc3			/* set CC3 to true */
+	subcc		gr9,gr5,gr9,icc0
+	subx		gr8,gr4,gr8,icc0
+	cstd.p		gr8,@(gr10,gr0)		,cc3,#1
+	corcc		gr29,gr29,gr0		,cc3,#1	/* clear ICC3.Z if store happens */
+	beq		icc3,#0,0b
+	bralr
+
+	.size		atomic64_sub_return, .-atomic64_sub_return
+
+###############################################################################
+#
+# uint64_t __xchg_64(uint64_t i, uint64_t *v)
+#
+###############################################################################
+	.globl		__xchg_64
+        .type		__xchg_64,@function
+__xchg_64:
+	or.p		gr8,gr8,gr4
+	or		gr9,gr9,gr5
+0:
+	orcc		gr0,gr0,gr0,icc3		/* set ICC3.Z */
+	ckeq		icc3,cc7
+	ldd.p		@(gr10,gr0),gr8			/* LDD.P/ORCR must be atomic */
+	orcr		cc7,cc7,cc3			/* set CC3 to true */
+	cstd.p		gr4,@(gr10,gr0)		,cc3,#1
+	corcc		gr29,gr29,gr0		,cc3,#1	/* clear ICC3.Z if store happens */
+	beq		icc3,#0,0b
+	bralr
+
+	.size		__xchg_64, .-__xchg_64
+
+###############################################################################
+#
+# uint64_t __cmpxchg_64(uint64_t test, uint64_t new, uint64_t *v)
+#
+###############################################################################
+	.globl		__cmpxchg_64
+        .type		__cmpxchg_64,@function
+__cmpxchg_64:
+	or.p		gr8,gr8,gr4
+	or		gr9,gr9,gr5
+0:
+	orcc		gr0,gr0,gr0,icc3		/* set ICC3.Z */
+	ckeq		icc3,cc7
+	ldd.p		@(gr12,gr0),gr8			/* LDD.P/ORCR must be atomic */
+	orcr		cc7,cc7,cc3
+	subcc		gr8,gr4,gr0,icc0
+	subcc.p		gr9,gr5,gr0,icc1
+	bnelr		icc0,#0
+	bnelr		icc1,#0
+	cstd.p		gr10,@(gr12,gr0)	,cc3,#1
+	corcc		gr29,gr29,gr0		,cc3,#1	/* clear ICC3.Z if store happens */
+	beq		icc3,#0,0b
+	bralr
+
+	.size		__cmpxchg_64, .-__cmpxchg_64
+
diff --git a/arch/frv/lib/perf_counter.c b/arch/frv/lib/perf_counter.c
new file mode 100644
index 000000000000..2000feecd571
--- /dev/null
+++ b/arch/frv/lib/perf_counter.c
@@ -0,0 +1,19 @@
+/* Performance counter handling
+ *
+ * Copyright (C) 2009 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#include <linux/perf_counter.h>
+
+/*
+ * mark the performance counter as pending
+ */
+void set_perf_counter_pending(void)
+{
+}
diff --git a/arch/h8300/include/asm/thread_info.h b/arch/h8300/include/asm/thread_info.h
index 700014d2155f..8bbc8b0ee45d 100644
--- a/arch/h8300/include/asm/thread_info.h
+++ b/arch/h8300/include/asm/thread_info.h
@@ -36,7 +36,7 @@ struct thread_info {
 	.exec_domain =	&default_exec_domain,	\
 	.flags =	0,			\
 	.cpu =		0,			\
-	.preempt_count = 1,			\
+	.preempt_count = INIT_PREEMPT_COUNT,	\
 	.restart_block	= {			\
 		.fn = do_no_restart_syscall,	\
 	},					\
diff --git a/arch/ia64/include/asm/thread_info.h b/arch/ia64/include/asm/thread_info.h
index ae6922626bf4..8ce2e388e37c 100644
--- a/arch/ia64/include/asm/thread_info.h
+++ b/arch/ia64/include/asm/thread_info.h
@@ -48,7 +48,7 @@ struct thread_info {
 	.flags		= 0,			\
 	.cpu		= 0,			\
 	.addr_limit	= KERNEL_DS,		\
-	.preempt_count	= 0,			\
+	.preempt_count	= INIT_PREEMPT_COUNT,	\
 	.restart_block = {			\
 		.fn = do_no_restart_syscall,	\
 	},					\
diff --git a/arch/ia64/kernel/esi.c b/arch/ia64/kernel/esi.c
index ebf4e988e78c..d5764a3d74af 100644
--- a/arch/ia64/kernel/esi.c
+++ b/arch/ia64/kernel/esi.c
@@ -65,7 +65,7 @@ static int __init esi_init (void)
 	}
 
 	if (!esi)
-		return -ENODEV;;
+		return -ENODEV;
 
 	systab = __va(esi);
 
diff --git a/arch/ia64/kernel/perfmon.c b/arch/ia64/kernel/perfmon.c
index abce2468a40b..f1782705b1f7 100644
--- a/arch/ia64/kernel/perfmon.c
+++ b/arch/ia64/kernel/perfmon.c
@@ -5603,7 +5603,7 @@ pfm_interrupt_handler(int irq, void *arg)
  * /proc/perfmon interface, for debug only
  */
 
-#define PFM_PROC_SHOW_HEADER	((void *)nr_cpu_ids+1)
+#define PFM_PROC_SHOW_HEADER	((void *)(long)nr_cpu_ids+1)
 
 static void *
 pfm_proc_start(struct seq_file *m, loff_t *pos)
diff --git a/arch/ia64/kernel/salinfo.c b/arch/ia64/kernel/salinfo.c
index 7053c55b7649..e6676fca4828 100644
--- a/arch/ia64/kernel/salinfo.c
+++ b/arch/ia64/kernel/salinfo.c
@@ -192,7 +192,7 @@ struct salinfo_platform_oemdata_parms {
 static void
 salinfo_work_to_do(struct salinfo_data *data)
 {
-	down_trylock(&data->mutex);
+	(void)(down_trylock(&data->mutex) ?: 0);
 	up(&data->mutex);
 }
 
diff --git a/arch/ia64/kvm/kvm_lib.c b/arch/ia64/kvm/kvm_lib.c
index a85cb611ecd7..f1268b8e6f9e 100644
--- a/arch/ia64/kvm/kvm_lib.c
+++ b/arch/ia64/kvm/kvm_lib.c
@@ -11,5 +11,11 @@
  *
  */
 #undef CONFIG_MODULES
+#include <linux/module.h>
+#undef CONFIG_KALLSYMS
+#undef EXPORT_SYMBOL
+#undef EXPORT_SYMBOL_GPL
+#define EXPORT_SYMBOL(sym)
+#define EXPORT_SYMBOL_GPL(sym)
 #include "../../../lib/vsprintf.c"
 #include "../../../lib/ctype.c"
diff --git a/arch/ia64/kvm/process.c b/arch/ia64/kvm/process.c
index a8f84da04b49..bb862fb224f2 100644
--- a/arch/ia64/kvm/process.c
+++ b/arch/ia64/kvm/process.c
@@ -130,7 +130,7 @@ static void collect_interruption(struct kvm_vcpu *vcpu)
 	if (vdcr & IA64_DCR_PP) {
 		vpsr |= IA64_PSR_PP;
 	} else {
-		vpsr &= ~IA64_PSR_PP;;
+		vpsr &= ~IA64_PSR_PP;
 	}
 
 	vcpu_set_psr(vcpu, vpsr);
@@ -594,11 +594,11 @@ static void set_pal_call_data(struct kvm_vcpu *vcpu)
 		p->u.pal_data.gr30 = vcpu_get_gr(vcpu, 30);
 		break;
 	case PAL_BRAND_INFO:
-		p->u.pal_data.gr29 = gr29;;
+		p->u.pal_data.gr29 = gr29;
 		p->u.pal_data.gr30 = kvm_trans_pal_call_args(vcpu, gr30);
 		break;
 	default:
-		p->u.pal_data.gr29 = gr29;;
+		p->u.pal_data.gr29 = gr29;
 		p->u.pal_data.gr30 = vcpu_get_gr(vcpu, 30);
 	}
 	p->u.pal_data.gr28 = gr28;
diff --git a/arch/ia64/kvm/vcpu.c b/arch/ia64/kvm/vcpu.c
index a2c6c15e4761..46b02cbcc874 100644
--- a/arch/ia64/kvm/vcpu.c
+++ b/arch/ia64/kvm/vcpu.c
@@ -406,7 +406,7 @@ void getreg(unsigned long regnum, unsigned long *val,
 	 * Now look at registers in [0-31] range and init correct UNAT
 	 */
 	addr = (unsigned long)regs;
-	unat = &regs->eml_unat;;
+	unat = &regs->eml_unat;
 
 	addr += gr_info[regnum];
 
diff --git a/arch/ia64/kvm/vtlb.c b/arch/ia64/kvm/vtlb.c
index 4290a429bf7c..20b3852f7a6e 100644
--- a/arch/ia64/kvm/vtlb.c
+++ b/arch/ia64/kvm/vtlb.c
@@ -135,7 +135,7 @@ struct thash_data *__vtr_lookup(struct kvm_vcpu *vcpu, u64 va, int type)
 	u64 rid;
 
 	rid = vcpu_get_rr(vcpu, va);
-	rid = rid & RR_RID_MASK;;
+	rid = rid & RR_RID_MASK;
 	if (type == D_TLB) {
 		if (vcpu_quick_region_check(vcpu->arch.dtr_regions, va)) {
 			for (trp = (struct thash_data *)&vcpu->arch.dtrs, i = 0;
@@ -518,7 +518,7 @@ struct thash_data *vtlb_lookup(struct kvm_vcpu *v, u64 va, int is_data)
 
 	struct thash_cb *hcb = &v->arch.vtlb;
 
-	cch = __vtr_lookup(v, va, is_data);;
+	cch = __vtr_lookup(v, va, is_data);
 	if (cch)
 		return cch;
 
diff --git a/arch/ia64/pci/pci.c b/arch/ia64/pci/pci.c
index 729298f4b234..7de76dd352fe 100644
--- a/arch/ia64/pci/pci.c
+++ b/arch/ia64/pci/pci.c
@@ -537,7 +537,7 @@ pcibios_align_resource (void *data, struct resource *res,
 /*
  * PCI BIOS setup, always defaults to SAL interface
  */
-char * __devinit
+char * __init
 pcibios_setup (char *str)
 {
 	return str;
diff --git a/arch/ia64/sn/kernel/io_common.c b/arch/ia64/sn/kernel/io_common.c
index 76645cf6ac5d..25831c47c579 100644
--- a/arch/ia64/sn/kernel/io_common.c
+++ b/arch/ia64/sn/kernel/io_common.c
@@ -435,7 +435,8 @@ void sn_generate_path(struct pci_bus *pci_bus, char *address)
 	bricktype = MODULE_GET_BTYPE(moduleid);
 	if ((bricktype == L1_BRICKTYPE_191010) ||
 	    (bricktype == L1_BRICKTYPE_1932))
-			sprintf(address, "%s^%d", address, geo_slot(geoid));
+			sprintf(address + strlen(address), "^%d",
+						geo_slot(geoid));
 }
 
 void __devinit
diff --git a/arch/m32r/include/asm/thread_info.h b/arch/m32r/include/asm/thread_info.h
index 8589d462df27..07bb5bd00e2a 100644
--- a/arch/m32r/include/asm/thread_info.h
+++ b/arch/m32r/include/asm/thread_info.h
@@ -57,8 +57,6 @@ struct thread_info {
 
 /*
  * macros/functions for gaining access to the thread information structure
- *
- * preempt_count needs to be 1 initially, until the scheduler is functional.
  */
 #ifndef __ASSEMBLY__
 
@@ -68,7 +66,7 @@ struct thread_info {
 	.exec_domain	= &default_exec_domain,	\
 	.flags		= 0,			\
 	.cpu		= 0,			\
-	.preempt_count	= 1,			\
+	.preempt_count	= INIT_PREEMPT_COUNT,	\
 	.addr_limit	= KERNEL_DS,		\
 	.restart_block = {			\
 		.fn = do_no_restart_syscall,	\
diff --git a/arch/m68k/include/asm/thread_info_mm.h b/arch/m68k/include/asm/thread_info_mm.h
index af0fda46e94b..6ea5c33b3c56 100644
--- a/arch/m68k/include/asm/thread_info_mm.h
+++ b/arch/m68k/include/asm/thread_info_mm.h
@@ -19,6 +19,7 @@ struct thread_info {
 {						\
 	.task		= &tsk,			\
 	.exec_domain	= &default_exec_domain,	\
+	.preempt_count	= INIT_PREEMPT_COUNT,	\
 	.restart_block = {			\
 		.fn = do_no_restart_syscall,	\
 	},					\
diff --git a/arch/m68k/include/asm/thread_info_no.h b/arch/m68k/include/asm/thread_info_no.h
index 82529f424ea3..c2bde5e24b0b 100644
--- a/arch/m68k/include/asm/thread_info_no.h
+++ b/arch/m68k/include/asm/thread_info_no.h
@@ -49,6 +49,7 @@ struct thread_info {
 	.exec_domain	= &default_exec_domain,	\
 	.flags		= 0,			\
 	.cpu		= 0,			\
+	.preempt_count	= INIT_PREEMPT_COUNT,	\
 	.restart_block	= {			\
 		.fn = do_no_restart_syscall,	\
 	},					\
diff --git a/arch/m68knommu/kernel/process.c b/arch/m68knommu/kernel/process.c
index 1e96c6eb6312..8f8f4abab2ff 100644
--- a/arch/m68knommu/kernel/process.c
+++ b/arch/m68knommu/kernel/process.c
@@ -290,7 +290,7 @@ void dump(struct pt_regs *fp)
 	unsigned char	*tp;
 	int		i;
 
-	printk(KERN_EMERG "\n" KERN_EMERG "CURRENT PROCESS:\n" KERN_EMERG "\n");
+	printk(KERN_EMERG "\nCURRENT PROCESS:\n\n");
 	printk(KERN_EMERG "COMM=%s PID=%d\n", current->comm, current->pid);
 
 	if (current->mm) {
@@ -301,8 +301,7 @@ void dump(struct pt_regs *fp)
 			(int) current->mm->end_data,
 			(int) current->mm->end_data,
 			(int) current->mm->brk);
-		printk(KERN_EMERG "USER-STACK=%08x KERNEL-STACK=%08x\n"
-			KERN_EMERG "\n",
+		printk(KERN_EMERG "USER-STACK=%08x KERNEL-STACK=%08x\n\n",
 			(int) current->mm->start_stack,
 			(int)(((unsigned long) current) + THREAD_SIZE));
 	}
@@ -313,35 +312,35 @@ void dump(struct pt_regs *fp)
 		fp->d0, fp->d1, fp->d2, fp->d3);
 	printk(KERN_EMERG "d4: %08lx    d5: %08lx    a0: %08lx    a1: %08lx\n",
 		fp->d4, fp->d5, fp->a0, fp->a1);
-	printk(KERN_EMERG "\n" KERN_EMERG "USP: %08x   TRAPFRAME: %08x\n",
+	printk(KERN_EMERG "\nUSP: %08x   TRAPFRAME: %08x\n",
 		(unsigned int) rdusp(), (unsigned int) fp);
 
-	printk(KERN_EMERG "\n" KERN_EMERG "CODE:");
+	printk(KERN_EMERG "\nCODE:");
 	tp = ((unsigned char *) fp->pc) - 0x20;
 	for (sp = (unsigned long *) tp, i = 0; (i < 0x40);  i += 4) {
 		if ((i % 0x10) == 0)
-			printk("\n" KERN_EMERG "%08x: ", (int) (tp + i));
+			printk(KERN_EMERG "%08x: ", (int) (tp + i));
 		printk("%08x ", (int) *sp++);
 	}
-	printk("\n" KERN_EMERG "\n");
+	printk(KERN_EMERG "\n");
 
 	printk(KERN_EMERG "KERNEL STACK:");
 	tp = ((unsigned char *) fp) - 0x40;
 	for (sp = (unsigned long *) tp, i = 0; (i < 0xc0); i += 4) {
 		if ((i % 0x10) == 0)
-			printk("\n" KERN_EMERG "%08x: ", (int) (tp + i));
+			printk(KERN_EMERG "%08x: ", (int) (tp + i));
 		printk("%08x ", (int) *sp++);
 	}
-	printk("\n" KERN_EMERG "\n");
+	printk(KERN_EMERG "\n");
 
 	printk(KERN_EMERG "USER STACK:");
 	tp = (unsigned char *) (rdusp() - 0x10);
 	for (sp = (unsigned long *) tp, i = 0; (i < 0x80); i += 4) {
 		if ((i % 0x10) == 0)
-			printk("\n" KERN_EMERG "%08x: ", (int) (tp + i));
+			printk(KERN_EMERG "%08x: ", (int) (tp + i));
 		printk("%08x ", (int) *sp++);
 	}
-	printk("\n" KERN_EMERG "\n");
+	printk(KERN_EMERG "\n");
 }
 
 /*
diff --git a/arch/m68knommu/kernel/traps.c b/arch/m68knommu/kernel/traps.c
index 51d325343ab5..3739c8f657d7 100644
--- a/arch/m68knommu/kernel/traps.c
+++ b/arch/m68knommu/kernel/traps.c
@@ -111,7 +111,7 @@ static void print_this_address(unsigned long addr, int i)
 	if (i % 5)
 		printk(KERN_CONT " [%08lx] ", addr);
 	else
-		printk(KERN_CONT "\n" KERN_EMERG " [%08lx] ", addr);
+		printk(KERN_EMERG " [%08lx] ", addr);
 	i++;
 #endif
 }
@@ -137,8 +137,8 @@ static void __show_stack(struct task_struct *task, unsigned long *stack)
 		if (stack + 1 + i > endstack)
 			break;
 		if (i % 8 == 0)
-			printk("\n" KERN_EMERG "       ");
-		printk(" %08lx", *(stack + i));
+			printk(KERN_EMERG "       ");
+		printk(KERN_CONT " %08lx", *(stack + i));
 	}
 	printk("\n");
 	i = 0;
diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig
index b50b845fdd50..2db722d80d4d 100644
--- a/arch/microblaze/Kconfig
+++ b/arch/microblaze/Kconfig
@@ -53,6 +53,9 @@ config GENERIC_HARDIRQS_NO__DO_IRQ
 config GENERIC_GPIO
 	def_bool y
 
+config GENERIC_CSUM
+	def_bool y
+
 config PCI
 	def_bool n
 
diff --git a/arch/microblaze/include/asm/atomic.h b/arch/microblaze/include/asm/atomic.h
index 0de612ad7cb2..6d2e1d418be7 100644
--- a/arch/microblaze/include/asm/atomic.h
+++ b/arch/microblaze/include/asm/atomic.h
@@ -1,95 +1,7 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
 #ifndef _ASM_MICROBLAZE_ATOMIC_H
 #define _ASM_MICROBLAZE_ATOMIC_H
 
-#include <linux/types.h>
-#include <linux/compiler.h> /* likely */
-#include <asm/system.h> /* local_irq_XXX and friends */
-
-#define ATOMIC_INIT(i)		{ (i) }
-#define atomic_read(v)		((v)->counter)
-#define atomic_set(v, i)	(((v)->counter) = (i))
-
-#define atomic_inc(v)		(atomic_add_return(1, (v)))
-#define atomic_dec(v)		(atomic_sub_return(1, (v)))
-
-#define atomic_add(i, v)	(atomic_add_return(i, (v)))
-#define atomic_sub(i, v)	(atomic_sub_return(i, (v)))
-
-#define atomic_inc_return(v)	(atomic_add_return(1, (v)))
-#define atomic_dec_return(v)	(atomic_sub_return(1, (v)))
-
-#define atomic_inc_and_test(v)	(atomic_add_return(1, (v)) == 0)
-#define atomic_dec_and_test(v)	(atomic_sub_return(1, (v)) == 0)
-
-#define atomic_inc_not_zero(v)	(atomic_add_unless((v), 1, 0))
-
-#define atomic_sub_and_test(i, v) (atomic_sub_return((i), (v)) == 0)
-
-static inline int atomic_cmpxchg(atomic_t *v, int old, int new)
-{
-	int ret;
-	unsigned long flags;
-
-	local_irq_save(flags);
-	ret = v->counter;
-	if (likely(ret == old))
-		v->counter = new;
-	local_irq_restore(flags);
-
-	return ret;
-}
-
-static inline int atomic_add_unless(atomic_t *v, int a, int u)
-{
-	int c, old;
-
-	c = atomic_read(v);
-	while (c != u && (old = atomic_cmpxchg((v), c, c + a)) != c)
-		c = old;
-	return c != u;
-}
-
-static inline void atomic_clear_mask(unsigned long mask, unsigned long *addr)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-	*addr &= ~mask;
-	local_irq_restore(flags);
-}
-
-/**
- * atomic_add_return - add and return
- * @i: integer value to add
- * @v: pointer of type atomic_t
- *
- * Atomically adds @i to @v and returns @i + @v
- */
-static inline int atomic_add_return(int i, atomic_t *v)
-{
-	unsigned long flags;
-	int val;
-
-	local_irq_save(flags);
-	val = v->counter;
-	v->counter = val += i;
-	local_irq_restore(flags);
-
-	return val;
-}
-
-static inline int atomic_sub_return(int i, atomic_t *v)
-{
-	return atomic_add_return(-i, v);
-}
+#include <asm-generic/atomic.h>
 
 /*
  * Atomically test *v and decrement if it is greater than 0.
@@ -109,15 +21,4 @@ static inline int atomic_dec_if_positive(atomic_t *v)
 	return res;
 }
 
-#define atomic_add_negative(a, v)	(atomic_add_return((a), (v)) < 0)
-#define atomic_xchg(v, new) (xchg(&((v)->counter), new))
-
-/* Atomic operations are already serializing */
-#define smp_mb__before_atomic_dec()	barrier()
-#define smp_mb__after_atomic_dec()	barrier()
-#define smp_mb__before_atomic_inc()	barrier()
-#define smp_mb__after_atomic_inc()	barrier()
-
-#include <asm-generic/atomic-long.h>
-
 #endif /* _ASM_MICROBLAZE_ATOMIC_H */
diff --git a/arch/microblaze/include/asm/bitops.h b/arch/microblaze/include/asm/bitops.h
index d6df1fd4e1e8..a72468f15c8b 100644
--- a/arch/microblaze/include/asm/bitops.h
+++ b/arch/microblaze/include/asm/bitops.h
@@ -1,27 +1 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_BITOPS_H
-#define _ASM_MICROBLAZE_BITOPS_H
-
-/*
- * Copyright 1992, Linus Torvalds.
- */
-
-#include <asm/byteorder.h> /* swab32 */
-#include <asm/system.h> /* save_flags */
-
-/*
- * clear_bit() doesn't provide any barrier for the compiler.
- */
-#define smp_mb__before_clear_bit()	barrier()
-#define smp_mb__after_clear_bit()	barrier()
 #include <asm-generic/bitops.h>
-#include <asm-generic/bitops/__fls.h>
-
-#endif /* _ASM_MICROBLAZE_BITOPS_H */
diff --git a/arch/microblaze/include/asm/bug.h b/arch/microblaze/include/asm/bug.h
index 8eb2cdde11d7..b12fd89e42e9 100644
--- a/arch/microblaze/include/asm/bug.h
+++ b/arch/microblaze/include/asm/bug.h
@@ -1,15 +1 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_BUG_H
-#define _ASM_MICROBLAZE_BUG_H
-
-#include <linux/kernel.h>
 #include <asm-generic/bug.h>
-
-#endif /* _ASM_MICROBLAZE_BUG_H */
diff --git a/arch/microblaze/include/asm/bugs.h b/arch/microblaze/include/asm/bugs.h
index f2c6593653fb..61791e1ad9f5 100644
--- a/arch/microblaze/include/asm/bugs.h
+++ b/arch/microblaze/include/asm/bugs.h
@@ -1,17 +1 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_BUGS_H
-#define _ASM_MICROBLAZE_BUGS_H
-
-static inline void check_bugs(void)
-{
-	/* nothing to do */
-}
-
-#endif /* _ASM_MICROBLAZE_BUGS_H */
+#include <asm-generic/bugs.h>
diff --git a/arch/microblaze/include/asm/checksum.h b/arch/microblaze/include/asm/checksum.h
index 97ea46b5cf80..128bf03b54b7 100644
--- a/arch/microblaze/include/asm/checksum.h
+++ b/arch/microblaze/include/asm/checksum.h
@@ -10,12 +10,11 @@
 #ifndef _ASM_MICROBLAZE_CHECKSUM_H
 #define _ASM_MICROBLAZE_CHECKSUM_H
 
-#include <linux/in6.h>
-
 /*
  * computes the checksum of the TCP/UDP pseudo-header
  * returns a 16-bit checksum, already complemented
  */
+#define csum_tcpudp_nofold	csum_tcpudp_nofold
 static inline __wsum
 csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len,
 		   unsigned short proto, __wsum sum)
@@ -30,71 +29,6 @@ csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len,
 	return sum;
 }
 
-/*
- * computes the checksum of a memory block at buff, length len,
- * and adds in "sum" (32-bit)
- *
- * returns a 32-bit number suitable for feeding into itself
- * or csum_tcpudp_magic
- *
- * this function must be called with even lengths, except
- * for the last fragment, which may be odd
- *
- * it's best to have buff aligned on a 32-bit boundary
- */
-extern __wsum csum_partial(const void *buff, int len, __wsum sum);
-
-/*
- * the same as csum_partial, but copies from src while it
- * checksums
- *
- * here even more important to align src and dst on a 32-bit (or even
- * better 64-bit) boundary
- */
-extern __wsum csum_partial_copy(const void *src, void *dst, int len,
-								__wsum sum);
-
-/*
- * the same as csum_partial_copy, but copies from user space.
- *
- * here even more important to align src and dst on a 32-bit (or even
- * better 64-bit) boundary
- */
-extern __wsum csum_partial_copy_from_user(const void __user *src, void *dst,
-					int len, __wsum sum, int *csum_err);
-
-#define csum_partial_copy_nocheck(src, dst, len, sum)	\
-	csum_partial_copy((src), (dst), (len), (sum))
-
-/*
- *	This is a version of ip_compute_csum() optimized for IP headers,
- *	which always checksum on 4 octet boundaries.
- *
- */
-extern __sum16 ip_fast_csum(const void *iph, unsigned int ihl);
-
-/*
- *	Fold a partial checksum
- */
-static inline __sum16 csum_fold(__wsum csum)
-{
-	u32 sum = (__force u32)csum;
-	sum = (sum & 0xffff) + (sum >> 16);
-	sum = (sum & 0xffff) + (sum >> 16);
-	return (__force __sum16)~sum;
-}
-
-static inline __sum16
-csum_tcpudp_magic(__be32 saddr, __be32 daddr, unsigned short len,
-		  unsigned short proto, __wsum sum)
-{
-	return csum_fold(csum_tcpudp_nofold(saddr, daddr, len, proto, sum));
-}
-
-/*
- * this routine is used for miscellaneous IP-like checksums, mainly
- * in icmp.c
- */
-extern __sum16 ip_compute_csum(const void *buff, int len);
+#include <asm-generic/checksum.h>
 
 #endif /* _ASM_MICROBLAZE_CHECKSUM_H */
diff --git a/arch/microblaze/include/asm/fb.h b/arch/microblaze/include/asm/fb.h
new file mode 100644
index 000000000000..3a4988e8df45
--- /dev/null
+++ b/arch/microblaze/include/asm/fb.h
@@ -0,0 +1 @@
+#include <asm-generic/fb.h>
diff --git a/arch/microblaze/include/asm/hardirq.h b/arch/microblaze/include/asm/hardirq.h
index 0f2d6b013e11..41e1e1aa36ac 100644
--- a/arch/microblaze/include/asm/hardirq.h
+++ b/arch/microblaze/include/asm/hardirq.h
@@ -9,21 +9,11 @@
 #ifndef _ASM_MICROBLAZE_HARDIRQ_H
 #define _ASM_MICROBLAZE_HARDIRQ_H
 
-#include <linux/cache.h>
-#include <linux/irq.h>
-#include <asm/irq.h>
-#include <asm/current.h>
-#include <linux/ptrace.h>
-
 /* should be defined in each interrupt controller driver */
 extern unsigned int get_irq(struct pt_regs *regs);
 
-typedef struct {
-	unsigned int __softirq_pending;
-} ____cacheline_aligned irq_cpustat_t;
-
+#define ack_bad_irq ack_bad_irq
 void ack_bad_irq(unsigned int irq);
-
-#include <linux/irq_cpustat.h> /* Standard mappings for irq_cpustat_t above */
+#include <asm-generic/hardirq.h>
 
 #endif /* _ASM_MICROBLAZE_HARDIRQ_H */
diff --git a/arch/microblaze/include/asm/ioctls.h b/arch/microblaze/include/asm/ioctls.h
index 03582b249204..ec34c760665e 100644
--- a/arch/microblaze/include/asm/ioctls.h
+++ b/arch/microblaze/include/asm/ioctls.h
@@ -1,91 +1 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_IOCTLS_H
-#define _ASM_MICROBLAZE_IOCTLS_H
-
-#include <linux/ioctl.h>
-
-/* 0x54 is just a magic number to make these relatively unique ('T') */
-
-#define TCGETS		0x5401
-#define TCSETS		0x5402
-#define TCSETSW		0x5403
-#define TCSETSF		0x5404
-#define TCGETA		0x5405
-#define TCSETA		0x5406
-#define TCSETAW		0x5407
-#define TCSETAF		0x5408
-#define TCSBRK		0x5409
-#define TCXONC		0x540A
-#define TCFLSH		0x540B
-#define TIOCEXCL	0x540C
-#define TIOCNXCL	0x540D
-#define TIOCSCTTY	0x540E
-#define TIOCGPGRP	0x540F
-#define TIOCSPGRP	0x5410
-#define TIOCOUTQ	0x5411
-#define TIOCSTI		0x5412
-#define TIOCGWINSZ	0x5413
-#define TIOCSWINSZ	0x5414
-#define TIOCMGET	0x5415
-#define TIOCMBIS	0x5416
-#define TIOCMBIC	0x5417
-#define TIOCMSET	0x5418
-#define TIOCGSOFTCAR	0x5419
-#define TIOCSSOFTCAR	0x541A
-#define FIONREAD	0x541B
-#define TIOCINQ		FIONREAD
-#define TIOCLINUX	0x541C
-#define TIOCCONS	0x541D
-#define TIOCGSERIAL	0x541E
-#define TIOCSSERIAL	0x541F
-#define TIOCPKT		0x5420
-#define FIONBIO		0x5421
-#define TIOCNOTTY	0x5422
-#define TIOCSETD	0x5423
-#define TIOCGETD	0x5424
-#define TCSBRKP		0x5425 /* Needed for POSIX tcsendbreak() */
-#define TIOCTTYGSTRUCT	0x5426 /* For debugging only */
-#define TIOCSBRK	0x5427 /* BSD compatibility */
-#define TIOCCBRK	0x5428 /* BSD compatibility */
-#define TIOCGSID	0x5429 /* Return the session ID of FD */
-/* Get Pty Number (of pty-mux device) */
-#define TIOCGPTN	_IOR('T', 0x30, unsigned int)
-#define TIOCSPTLCK	_IOW('T', 0x31, int) /* Lock/unlock Pty */
-
-#define FIONCLEX	0x5450 /* these numbers need to be adjusted. */
-#define FIOCLEX		0x5451
-#define FIOASYNC	0x5452
-#define TIOCSERCONFIG	0x5453
-#define TIOCSERGWILD	0x5454
-#define TIOCSERSWILD	0x5455
-#define TIOCGLCKTRMIOS	0x5456
-#define TIOCSLCKTRMIOS	0x5457
-#define TIOCSERGSTRUCT	0x5458 /* For debugging only */
-#define TIOCSERGETLSR	0x5459 /* Get line status register */
-#define TIOCSERGETMULTI 0x545A /* Get multiport config */
-#define TIOCSERSETMULTI 0x545B /* Set multiport config */
-
-#define TIOCMIWAIT	0x545C /* wait for a change on serial input line(s) */
-#define TIOCGICOUNT	0x545D /* read serial port inline interrupt counts */
-
-#define	FIOQSIZE	0x545E
-
-/* Used for packet mode */
-#define TIOCPKT_DATA		0
-#define TIOCPKT_FLUSHREAD	1
-#define TIOCPKT_FLUSHWRITE	2
-#define TIOCPKT_STOP		4
-#define TIOCPKT_START		8
-#define TIOCPKT_NOSTOP		16
-#define TIOCPKT_DOSTOP		32
-
-#define TIOCSER_TEMT	0x01 /* Transmitter physically empty */
-
-#endif /* _ASM_MICROBLAZE_IOCTLS_H */
+#include <asm-generic/ioctls.h>
diff --git a/arch/microblaze/include/asm/ipcbuf.h b/arch/microblaze/include/asm/ipcbuf.h
index b056fa420654..84c7e51cb6d0 100644
--- a/arch/microblaze/include/asm/ipcbuf.h
+++ b/arch/microblaze/include/asm/ipcbuf.h
@@ -1,36 +1 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_IPCBUF_H
-#define _ASM_MICROBLAZE_IPCBUF_H
-
-/*
- * The user_ipc_perm structure for microblaze architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 32-bit mode_t and seq
- * - 2 miscellaneous 32-bit values
- */
-
-struct ipc64_perm {
-	__kernel_key_t		key;
-	__kernel_uid32_t	uid;
-	__kernel_gid32_t	gid;
-	__kernel_uid32_t	cuid;
-	__kernel_gid32_t	cgid;
-	__kernel_mode_t		mode;
-	unsigned short		__pad1;
-	unsigned short		seq;
-	unsigned short		__pad2;
-	unsigned long		__unused1;
-	unsigned long		__unused2;
-};
-
-#endif /* _ASM_MICROBLAZE_IPCBUF_H */
+#include <asm-generic/ipcbuf.h>
diff --git a/arch/microblaze/include/asm/irq.h b/arch/microblaze/include/asm/irq.h
index db515deaa720..90f050535ebe 100644
--- a/arch/microblaze/include/asm/irq.h
+++ b/arch/microblaze/include/asm/irq.h
@@ -10,6 +10,7 @@
 #define _ASM_MICROBLAZE_IRQ_H
 
 #define NR_IRQS 32
+#include <asm-generic/irq.h>
 
 #include <linux/interrupt.h>
 
@@ -17,11 +18,6 @@ extern unsigned int nr_irq;
 
 #define NO_IRQ (-1)
 
-static inline int irq_canonicalize(int irq)
-{
-	return irq;
-}
-
 struct pt_regs;
 extern void do_IRQ(struct pt_regs *regs);
 
diff --git a/arch/microblaze/include/asm/mman.h b/arch/microblaze/include/asm/mman.h
index 4914b1329445..8eebf89f5ab1 100644
--- a/arch/microblaze/include/asm/mman.h
+++ b/arch/microblaze/include/asm/mman.h
@@ -1,25 +1 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_MMAN_H
-#define _ASM_MICROBLAZE_MMAN_H
-
 #include <asm-generic/mman.h>
-
-#define MAP_GROWSDOWN	0x0100 /* stack-like segment */
-#define MAP_DENYWRITE	0x0800 /* ETXTBSY */
-#define MAP_EXECUTABLE	0x1000 /* mark it as an executable */
-#define MAP_LOCKED	0x2000 /* pages are locked */
-#define MAP_NORESERVE	0x4000 /* don't check for reservations */
-#define MAP_POPULATE	0x8000 /* populate (prefault) pagetables */
-#define MAP_NONBLOCK	0x10000 /* do not block on IO */
-
-#define MCL_CURRENT	1 /* lock all current mappings */
-#define MCL_FUTURE	2 /* lock all future mappings */
-
-#endif /* _ASM_MICROBLAZE_MMAN_H */
diff --git a/arch/microblaze/include/asm/mmu.h b/arch/microblaze/include/asm/mmu.h
index 66cad6a99d77..8d6a654ceffb 100644
--- a/arch/microblaze/include/asm/mmu.h
+++ b/arch/microblaze/include/asm/mmu.h
@@ -12,12 +12,7 @@
 #define _ASM_MICROBLAZE_MMU_H
 
 # ifndef CONFIG_MMU
-#  ifndef __ASSEMBLY__
-typedef struct {
-	struct vm_list_struct	*vmlist;
-	unsigned long		end_brk;
-} mm_context_t;
-#  endif /* __ASSEMBLY__ */
+#  include <asm-generic/mmu.h>
 # else /* CONFIG_MMU */
 #  ifdef __KERNEL__
 #   ifndef __ASSEMBLY__
diff --git a/arch/microblaze/include/asm/mmu_context.h b/arch/microblaze/include/asm/mmu_context.h
index 385fed16bbfb..24eab1674d3e 100644
--- a/arch/microblaze/include/asm/mmu_context.h
+++ b/arch/microblaze/include/asm/mmu_context.h
@@ -1,5 +1,5 @@
 #ifdef CONFIG_MMU
 # include "mmu_context_mm.h"
 #else
-# include "mmu_context_no.h"
+# include <asm-generic/mmu_context.h>
 #endif
diff --git a/arch/microblaze/include/asm/mmu_context_no.h b/arch/microblaze/include/asm/mmu_context_no.h
deleted file mode 100644
index ba5567190154..000000000000
--- a/arch/microblaze/include/asm/mmu_context_no.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
- * Copyright (C) 2008-2009 PetaLogix
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_MMU_CONTEXT_H
-#define _ASM_MICROBLAZE_MMU_CONTEXT_H
-
-# define init_new_context(tsk, mm)		({ 0; })
-
-# define enter_lazy_tlb(mm, tsk)		do {} while (0)
-# define change_mm_context(old, ctx, _pml4)	do {} while (0)
-# define destroy_context(mm)			do {} while (0)
-# define deactivate_mm(tsk, mm)			do {} while (0)
-# define switch_mm(prev, next, tsk)		do {} while (0)
-# define activate_mm(prev, next)		do {} while (0)
-
-#endif /* _ASM_MICROBLAZE_MMU_CONTEXT_H */
diff --git a/arch/microblaze/include/asm/module.h b/arch/microblaze/include/asm/module.h
index 914565a90315..7be1347fce42 100644
--- a/arch/microblaze/include/asm/module.h
+++ b/arch/microblaze/include/asm/module.h
@@ -9,6 +9,8 @@
 #ifndef _ASM_MICROBLAZE_MODULE_H
 #define _ASM_MICROBLAZE_MODULE_H
 
+#include <asm-generic/module.h>
+
 /* Microblaze Relocations */
 #define R_MICROBLAZE_NONE 0
 #define R_MICROBLAZE_32 1
@@ -24,14 +26,6 @@
 /* Keep this the last entry. */
 #define R_MICROBLAZE_NUM 11
 
-struct mod_arch_specific {
-	int foo;
-};
-
-#define Elf_Shdr	Elf32_Shdr
-#define Elf_Sym		Elf32_Sym
-#define Elf_Ehdr	Elf32_Ehdr
-
 typedef struct { volatile int counter; } module_t;
 
 #endif /* _ASM_MICROBLAZE_MODULE_H */
diff --git a/arch/microblaze/include/asm/msgbuf.h b/arch/microblaze/include/asm/msgbuf.h
index 09dd97097211..809134c644a6 100644
--- a/arch/microblaze/include/asm/msgbuf.h
+++ b/arch/microblaze/include/asm/msgbuf.h
@@ -1,31 +1 @@
-#ifndef _ASM_MICROBLAZE_MSGBUF_H
-#define _ASM_MICROBLAZE_MSGBUF_H
-
-/*
- * The msqid64_ds structure for microblaze architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 64-bit time_t to solve y2038 problem
- * - 2 miscellaneous 32-bit values
- */
-
-struct msqid64_ds {
-	struct ipc64_perm msg_perm;
-	__kernel_time_t msg_stime; /* last msgsnd time */
-	unsigned long __unused1;
-	__kernel_time_t msg_rtime; /* last msgrcv time */
-	unsigned long __unused2;
-	__kernel_time_t msg_ctime; /* last change time */
-	unsigned long __unused3;
-	unsigned long msg_cbytes; /* current number of bytes on queue */
-	unsigned long msg_qnum; /* number of messages in queue */
-	unsigned long msg_qbytes; /* max number of bytes on queue */
-	__kernel_pid_t msg_lspid; /* pid of last msgsnd */
-	__kernel_pid_t msg_lrpid; /* last receive pid */
-	unsigned long __unused4;
-	unsigned long __unused5;
-};
-
-#endif /* _ASM_MICROBLAZE_MSGBUF_H */
+#include <asm-generic/msgbuf.h>
diff --git a/arch/microblaze/include/asm/param.h b/arch/microblaze/include/asm/param.h
index 8c538a49616d..965d45427975 100644
--- a/arch/microblaze/include/asm/param.h
+++ b/arch/microblaze/include/asm/param.h
@@ -1,30 +1 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_PARAM_H
-#define _ASM_MICROBLAZE_PARAM_H
-
-#ifdef __KERNEL__
-#define HZ		CONFIG_HZ	/* internal kernel timer frequency */
-#define USER_HZ		100		/* for user interfaces in "ticks" */
-#define CLOCKS_PER_SEC	(USER_HZ)	/* frequency at which times() counts */
-#endif /* __KERNEL__ */
-
-#ifndef HZ
-#define HZ 100
-#endif
-
-#define EXEC_PAGESIZE	4096
-
-#ifndef NOGROUP
-#define NOGROUP		(-1)
-#endif
-
-#define MAXHOSTNAMELEN	64	/* max length of hostname */
-
-#endif /* _ASM_MICROBLAZE_PARAM_H */
+#include <asm-generic/param.h>
diff --git a/arch/microblaze/include/asm/parport.h b/arch/microblaze/include/asm/parport.h
new file mode 100644
index 000000000000..cf252af64590
--- /dev/null
+++ b/arch/microblaze/include/asm/parport.h
@@ -0,0 +1 @@
+#include <asm-generic/parport.h>
diff --git a/arch/microblaze/include/asm/pci.h b/arch/microblaze/include/asm/pci.h
index ca03794cf3f0..9f0df5faf2c8 100644
--- a/arch/microblaze/include/asm/pci.h
+++ b/arch/microblaze/include/asm/pci.h
@@ -1 +1 @@
-#include <linux/io.h>
+#include <asm-generic/pci.h>
diff --git a/arch/microblaze/include/asm/posix_types.h b/arch/microblaze/include/asm/posix_types.h
index 8c758b231f37..0e15039673e3 100644
--- a/arch/microblaze/include/asm/posix_types.h
+++ b/arch/microblaze/include/asm/posix_types.h
@@ -1,73 +1,9 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
 #ifndef _ASM_MICROBLAZE_POSIX_TYPES_H
 #define _ASM_MICROBLAZE_POSIX_TYPES_H
 
-/*
- * This file is generally used by user-level software, so you need to
- * be a little careful about namespace pollution etc. Also, we cannot
- * assume GCC is being used.
- */
-
-typedef unsigned long	__kernel_ino_t;
 typedef unsigned short	__kernel_mode_t;
-typedef unsigned int	__kernel_nlink_t;
-typedef long		__kernel_off_t;
-typedef int		__kernel_pid_t;
-typedef unsigned int	__kernel_ipc_pid_t;
-typedef unsigned int	__kernel_uid_t;
-typedef unsigned int	__kernel_gid_t;
-typedef unsigned long	__kernel_size_t;
-typedef long		__kernel_ssize_t;
-typedef int		__kernel_ptrdiff_t;
-typedef long		__kernel_time_t;
-typedef long		__kernel_suseconds_t;
-typedef long		__kernel_clock_t;
-typedef int		__kernel_timer_t;
-typedef int		__kernel_clockid_t;
-typedef int		__kernel_daddr_t;
-typedef char 		*__kernel_caddr_t;
-typedef unsigned short	__kernel_uid16_t;
-typedef unsigned short	__kernel_gid16_t;
-typedef unsigned int	__kernel_uid32_t;
-typedef unsigned int	__kernel_gid32_t;
-
-typedef unsigned int	__kernel_old_uid_t;
-typedef unsigned int	__kernel_old_gid_t;
-typedef unsigned int	__kernel_old_dev_t;
-
-#ifdef __GNUC__
-typedef long long	__kernel_loff_t;
-#endif
-
-typedef struct {
-#if defined(__KERNEL__) || defined(__USE_ALL)
-	int	val[2];
-#else /* !defined(__KERNEL__) && !defined(__USE_ALL) */
-	int	__val[2];
-#endif /* !defined(__KERNEL__) && !defined(__USE_ALL) */
-} __kernel_fsid_t;
-
-#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2)
-
-#undef	__FD_SET
-#define	__FD_SET(d, set)	((set)->fds_bits[__FDELT(d)] |= __FDMASK(d))
-
-#undef	__FD_CLR
-#define	__FD_CLR(d, set)	((set)->fds_bits[__FDELT(d)] &= ~__FDMASK(d))
-
-#undef	__FD_ISSET
-#define	__FD_ISSET(d, set)	(!!((set)->fds_bits[__FDELT(d)] & __FDMASK(d)))
-
-#undef	__FD_ZERO
-#define __FD_ZERO(fdsetp) (memset(fdsetp, 0, sizeof(*(fd_set *)fdsetp)))
+#define __kernel_mode_t __kernel_mode_t
 
-#endif /* defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) */
+#include <asm-generic/posix_types.h>
 
 #endif /* _ASM_MICROBLAZE_POSIX_TYPES_H */
diff --git a/arch/microblaze/include/asm/scatterlist.h b/arch/microblaze/include/asm/scatterlist.h
index 08ff1d049b42..35d786fe93ae 100644
--- a/arch/microblaze/include/asm/scatterlist.h
+++ b/arch/microblaze/include/asm/scatterlist.h
@@ -1,28 +1 @@
-/*
- * Copyright (C) 2008 Michal Simek <monstr@monstr.eu>
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_SCATTERLIST_H
-#define _ASM_MICROBLAZE_SCATTERLIST_H
-
-struct scatterlist {
-#ifdef CONFIG_DEBUG_SG
-	unsigned long	sg_magic;
-#endif
-	unsigned long	page_link;
-	dma_addr_t	dma_address;
-	unsigned int	offset;
-	unsigned int	length;
-};
-
-#define sg_dma_address(sg)      ((sg)->dma_address)
-#define sg_dma_len(sg)          ((sg)->length)
-
-#define ISA_DMA_THRESHOLD (~0UL)
-
-#endif /* _ASM_MICROBLAZE_SCATTERLIST_H */
+#include <asm-generic/scatterlist.h>
diff --git a/arch/microblaze/include/asm/sembuf.h b/arch/microblaze/include/asm/sembuf.h
index b804ed71a57e..7673b83cfef7 100644
--- a/arch/microblaze/include/asm/sembuf.h
+++ b/arch/microblaze/include/asm/sembuf.h
@@ -1,34 +1 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_SEMBUF_H
-#define _ASM_MICROBLAZE_SEMBUF_H
-
-/*
- * The semid64_ds structure for microblaze architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 64-bit time_t to solve y2038 problem
- * - 2 miscellaneous 32-bit values
- */
-
-struct semid64_ds {
-	struct ipc64_perm sem_perm; /* permissions .. see ipc.h */
-	__kernel_time_t	sem_otime; /* last semop time */
-	unsigned long	__unused1;
-	__kernel_time_t	sem_ctime; /* last change time */
-	unsigned long	__unused2;
-	unsigned long	sem_nsems; /* no. of semaphores in array */
-	unsigned long	__unused3;
-	unsigned long	__unused4;
-};
-
-
-#endif /* _ASM_MICROBLAZE_SEMBUF_H */
+#include <asm-generic/sembuf.h>
diff --git a/arch/microblaze/include/asm/serial.h b/arch/microblaze/include/asm/serial.h
index 39bfc8ce6af5..a0cb0caff152 100644
--- a/arch/microblaze/include/asm/serial.h
+++ b/arch/microblaze/include/asm/serial.h
@@ -1,14 +1 @@
-/*
- * Copyright (C) 2009 Michal Simek <monstr@monstr.eu>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_SERIAL_H
-#define _ASM_MICROBLAZE_SERIAL_H
-
-# define BASE_BAUD (1843200 / 16)
-
-#endif /* _ASM_MICROBLAZE_SERIAL_H */
+#include <asm-generic/serial.h>
diff --git a/arch/microblaze/include/asm/shmbuf.h b/arch/microblaze/include/asm/shmbuf.h
index f829c5843618..83c05fc2de38 100644
--- a/arch/microblaze/include/asm/shmbuf.h
+++ b/arch/microblaze/include/asm/shmbuf.h
@@ -1,42 +1 @@
-#ifndef _ASM_MICROBLAZE_SHMBUF_H
-#define _ASM_MICROBLAZE_SHMBUF_H
-
-/*
- * The shmid64_ds structure for microblaze architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 64-bit time_t to solve y2038 problem
- * - 2 miscellaneous 32-bit values
- */
-
-struct shmid64_ds {
-	struct ipc64_perm	shm_perm; /* operation perms */
-	size_t			shm_segsz; /* size of segment (bytes) */
-	__kernel_time_t		shm_atime; /* last attach time */
-	unsigned long		__unused1;
-	__kernel_time_t		shm_dtime; /* last detach time */
-	unsigned long		__unused2;
-	__kernel_time_t		shm_ctime; /* last change time */
-	unsigned long		__unused3;
-	__kernel_pid_t		shm_cpid; /* pid of creator */
-	__kernel_pid_t		shm_lpid; /* pid of last operator */
-	unsigned long		shm_nattch; /* no. of current attaches */
-	unsigned long		__unused4;
-	unsigned long		__unused5;
-};
-
-struct shminfo64 {
-	unsigned long	shmmax;
-	unsigned long	shmmin;
-	unsigned long	shmmni;
-	unsigned long	shmseg;
-	unsigned long	shmall;
-	unsigned long	__unused1;
-	unsigned long	__unused2;
-	unsigned long	__unused3;
-	unsigned long	__unused4;
-};
-
-#endif /* _ASM_MICROBLAZE_SHMBUF_H */
+#include <asm-generic/shmbuf.h>
diff --git a/arch/microblaze/include/asm/shmparam.h b/arch/microblaze/include/asm/shmparam.h
index 9f5fc2b3b6a3..93f30deb95d0 100644
--- a/arch/microblaze/include/asm/shmparam.h
+++ b/arch/microblaze/include/asm/shmparam.h
@@ -1,6 +1 @@
-#ifndef _ASM_MICROBLAZE_SHMPARAM_H
-#define _ASM_MICROBLAZE_SHMPARAM_H
-
-#define SHMLBA	PAGE_SIZE /* attach addr a multiple of this */
-
-#endif /* _ASM_MICROBLAZE_SHMPARAM_H */
+#include <asm-generic/shmparam.h>
diff --git a/arch/microblaze/include/asm/siginfo.h b/arch/microblaze/include/asm/siginfo.h
index f162911a8f50..0815d29d82e5 100644
--- a/arch/microblaze/include/asm/siginfo.h
+++ b/arch/microblaze/include/asm/siginfo.h
@@ -1,15 +1 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_SIGINFO_H
-#define _ASM_MICROBLAZE_SIGINFO_H
-
-#include <linux/types.h>
 #include <asm-generic/siginfo.h>
-
-#endif /* _ASM_MICROBLAZE_SIGINFO_H */
diff --git a/arch/microblaze/include/asm/signal.h b/arch/microblaze/include/asm/signal.h
index 46bc2267d949..7b1573ce19de 100644
--- a/arch/microblaze/include/asm/signal.h
+++ b/arch/microblaze/include/asm/signal.h
@@ -1,165 +1 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *	Yasushi SHOJI <yashi@atmark-techno.com>
- *	Tetsuya OHKAWA <tetsuya@atmark-techno.com>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_SIGNAL_H
-#define _ASM_MICROBLAZE_SIGNAL_H
-
-#define SIGHUP		1
-#define SIGINT		2
-#define SIGQUIT		3
-#define SIGILL		4
-#define SIGTRAP		5
-#define SIGABRT		6
-#define SIGIOT		6
-#define SIGBUS		7
-#define SIGFPE		8
-#define SIGKILL		9
-#define SIGUSR1		10
-#define SIGSEGV		11
-#define SIGUSR2		12
-#define SIGPIPE		13
-#define SIGALRM		14
-#define SIGTERM		15
-#define SIGSTKFLT	16
-#define SIGCHLD		17
-#define SIGCONT		18
-#define SIGSTOP		19
-#define SIGTSTP		20
-#define SIGTTIN		21
-#define SIGTTOU		22
-#define SIGURG		23
-#define SIGXCPU		24
-#define SIGXFSZ		25
-#define SIGVTALRM	26
-#define SIGPROF		27
-#define SIGWINCH	28
-#define SIGIO		29
-#define SIGPOLL		SIGIO
-/*
-#define SIGLOST		29
-*/
-#define SIGPWR		30
-#define SIGSYS		31
-#define	SIGUNUSED	31
-
-/* These should not be considered constants from userland. */
-#define SIGRTMIN	32
-#define SIGRTMAX	_NSIG
-
-/*
- * SA_FLAGS values:
- *
- * SA_ONSTACK indicates that a registered stack_t will be used.
- * SA_RESTART flag to get restarting signals (which were the default long ago)
- * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
- * SA_RESETHAND clears the handler when the signal is delivered.
- * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
- * SA_NODEFER prevents the current signal from being masked in the handler.
- *
- * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
- * Unix names RESETHAND and NODEFER respectively.
- */
-#define SA_NOCLDSTOP	0x00000001
-#define SA_NOCLDWAIT	0x00000002
-#define SA_SIGINFO	0x00000004
-#define SA_ONSTACK	0x08000000
-#define SA_RESTART	0x10000000
-#define SA_NODEFER	0x40000000
-#define SA_RESETHAND	0x80000000
-
-#define SA_NOMASK	SA_NODEFER
-#define SA_ONESHOT	SA_RESETHAND
-
-#define SA_RESTORER	0x04000000
-
-/*
- * sigaltstack controls
- */
-#define SS_ONSTACK	1
-#define SS_DISABLE	2
-
-#define MINSIGSTKSZ	2048
-#define SIGSTKSZ	8192
-
-# ifndef __ASSEMBLY__
-# include <linux/types.h>
-# include <asm-generic/signal-defs.h>
-
-/* Avoid too many header ordering problems. */
-struct siginfo;
-
-#  ifdef __KERNEL__
-/*
- * Most things should be clean enough to redefine this at will, if care
- * is taken to make libc match.
- */
-#  define _NSIG		64
-#  define _NSIG_BPW	32
-#  define _NSIG_WORDS	(_NSIG / _NSIG_BPW)
-
-typedef unsigned long old_sigset_t; /* at least 32 bits */
-
-typedef struct {
-	unsigned long sig[_NSIG_WORDS];
-} sigset_t;
-
-struct old_sigaction {
-	__sighandler_t sa_handler;
-	old_sigset_t sa_mask;
-	unsigned long sa_flags;
-	void (*sa_restorer)(void);
-};
-
-struct sigaction {
-	__sighandler_t sa_handler;
-	unsigned long sa_flags;
-	void (*sa_restorer)(void);
-	sigset_t sa_mask; /* mask last for extensibility */
-};
-
-struct k_sigaction {
-	struct sigaction sa;
-};
-
-#  include <asm/sigcontext.h>
-#  undef __HAVE_ARCH_SIG_BITOPS
-
-#  define ptrace_signal_deliver(regs, cookie) do { } while (0)
-
-#  else /* !__KERNEL__ */
-
-/* Here we must cater to libcs that poke about in kernel headers. */
-
-#  define NSIG		32
-typedef unsigned long sigset_t;
-
-struct sigaction {
-	union {
-	__sighandler_t _sa_handler;
-	void (*_sa_sigaction)(int, struct siginfo *, void *);
-	} _u;
-	sigset_t sa_mask;
-	unsigned long sa_flags;
-	void (*sa_restorer)(void);
-};
-
-#  define sa_handler	_u._sa_handler
-#  define sa_sigaction	_u._sa_sigaction
-
-#  endif /* __KERNEL__ */
-
-typedef struct sigaltstack {
-	void *ss_sp;
-	int ss_flags;
-	size_t ss_size;
-} stack_t;
-
-# endif /* __ASSEMBLY__ */
-#endif /* _ASM_MICROBLAZE_SIGNAL_H */
+#include <asm-generic/signal.h>
diff --git a/arch/microblaze/include/asm/socket.h b/arch/microblaze/include/asm/socket.h
index 825936860314..6b71384b9d8b 100644
--- a/arch/microblaze/include/asm/socket.h
+++ b/arch/microblaze/include/asm/socket.h
@@ -1,69 +1 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_SOCKET_H
-#define _ASM_MICROBLAZE_SOCKET_H
-
-#include <asm/sockios.h>
-
-/* For setsockoptions(2) */
-#define SOL_SOCKET	1
-
-#define SO_DEBUG	1
-#define SO_REUSEADDR	2
-#define SO_TYPE		3
-#define SO_ERROR	4
-#define SO_DONTROUTE	5
-#define SO_BROADCAST	6
-#define SO_SNDBUF	7
-#define SO_RCVBUF	8
-#define SO_SNDBUFFORCE	32
-#define SO_RCVBUFFORCE	33
-#define SO_KEEPALIVE	9
-#define SO_OOBINLINE	10
-#define SO_NO_CHECK	11
-#define SO_PRIORITY	12
-#define SO_LINGER	13
-#define SO_BSDCOMPAT	14
-/* To add :#define SO_REUSEPORT 15 */
-#define SO_PASSCRED	16
-#define SO_PEERCRED	17
-#define SO_RCVLOWAT	18
-#define SO_SNDLOWAT	19
-#define SO_RCVTIMEO	20
-#define SO_SNDTIMEO	21
-
-/* Security levels - as per NRL IPv6 - don't actually do anything */
-#define SO_SECURITY_AUTHENTICATION		22
-#define SO_SECURITY_ENCRYPTION_TRANSPORT	23
-#define SO_SECURITY_ENCRYPTION_NETWORK		24
-
-#define SO_BINDTODEVICE	25
-
-/* Socket filtering */
-#define SO_ATTACH_FILTER	26
-#define SO_DETACH_FILTER	27
-
-#define SO_PEERNAME		28
-#define SO_TIMESTAMP		29
-#define SCM_TIMESTAMP		SO_TIMESTAMP
-
-#define SO_ACCEPTCONN		30
-
-#define SO_PEERSEC		31
-#define SO_PASSSEC		34
-
-#define SO_TIMESTAMPNS		35
-#define SCM_TIMESTAMPNS		SO_TIMESTAMPNS
-
-#define SO_MARK			36
-
-#define SO_TIMESTAMPING		37
-#define SCM_TIMESTAMPING	SO_TIMESTAMPING
-
-#endif /* _ASM_MICROBLAZE_SOCKET_H */
+#include <asm-generic/socket.h>
diff --git a/arch/microblaze/include/asm/sockios.h b/arch/microblaze/include/asm/sockios.h
index 9fff57a701e1..def6d4746ee7 100644
--- a/arch/microblaze/include/asm/sockios.h
+++ b/arch/microblaze/include/asm/sockios.h
@@ -1,23 +1 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_SOCKIOS_H
-#define _ASM_MICROBLAZE_SOCKIOS_H
-
-#include <linux/ioctl.h>
-
-/* Socket-level I/O control calls. */
-#define FIOSETOWN	0x8901
-#define SIOCSPGRP	0x8902
-#define FIOGETOWN	0x8903
-#define SIOCGPGRP	0x8904
-#define SIOCATMARK	0x8905
-#define SIOCGSTAMP	0x8906		/* Get stamp (timeval) */
-#define SIOCGSTAMPNS	0x8907		/* Get stamp (timespec) */
-
-#endif /* _ASM_MICROBLAZE_SOCKIOS_H */
+#include <asm-generic/sockios.h>
diff --git a/arch/microblaze/include/asm/stat.h b/arch/microblaze/include/asm/stat.h
index a15f77520bfd..3dc90fa92c70 100644
--- a/arch/microblaze/include/asm/stat.h
+++ b/arch/microblaze/include/asm/stat.h
@@ -1,68 +1 @@
-/*
- * Microblaze stat structure
- *
- * Copyright (C) 2001,02,03 NEC Electronics Corporation
- * Copyright (C) 2001,02,03 Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License. See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef _ASM_MICROBLAZE_STAT_H
-#define _ASM_MICROBLAZE_STAT_H
-
-#include <linux/posix_types.h>
-
-#define STAT_HAVE_NSEC 1
-
-struct stat {
-	unsigned long	st_dev;
-	unsigned long	st_ino;
-	unsigned int	st_mode;
-	unsigned int	st_nlink;
-	unsigned int	st_uid;
-	unsigned int	st_gid;
-	unsigned long	st_rdev;
-	unsigned long	__pad1;
-	long		st_size;
-	int		st_blksize;
-	int		__pad2;
-	long		st_blocks;
-	int		st_atime;
-	unsigned int	st_atime_nsec;
-	int		st_mtime;
-	unsigned int	st_mtime_nsec;
-	int		st_ctime;
-	unsigned int	st_ctime_nsec;
-	unsigned long	__unused4;
-	unsigned long	__unused5;
-};
-
-struct stat64 {
-	unsigned long long	st_dev;		/* Device.  */
-	unsigned long long	st_ino;		/* File serial number.  */
-	unsigned int		st_mode;	/* File mode.  */
-	unsigned int		st_nlink;	/* Link count.  */
-	unsigned int		st_uid;		/* User ID of the file's owner.  */
-	unsigned int		st_gid;		/* Group ID of the file's group. */
-	unsigned long long	st_rdev;	/* Device number, if device.  */
-	unsigned long long	__pad1;
-	long long		st_size;	/* Size of file, in bytes.  */
-	int			st_blksize;	/* Optimal block size for I/O.  */
-	int			__pad2;
-	long long		st_blocks;	/* Number 512-byte blocks allocated. */
-	int			st_atime;	/* Time of last access.  */
-	unsigned int		st_atime_nsec;
-	int			st_mtime;	/* Time of last modification.  */
-	unsigned int		st_mtime_nsec;
-	int			st_ctime;	/* Time of last status change.  */
-	unsigned int		st_ctime_nsec;
-	unsigned int		__unused4;
-	unsigned int		__unused5;
-};
-
-#endif /* _ASM_MICROBLAZE_STAT_H */
-
+#include <asm-generic/stat.h>
diff --git a/arch/microblaze/include/asm/swab.h b/arch/microblaze/include/asm/swab.h
index b375d7b65ad7..7847e563ab66 100644
--- a/arch/microblaze/include/asm/swab.h
+++ b/arch/microblaze/include/asm/swab.h
@@ -1,8 +1 @@
-#ifndef _ASM_MICROBLAZE_SWAB_H
-#define _ASM_MICROBLAZE_SWAB_H
-
-#if defined(__GNUC__) && !defined(__STRICT_ANSI__) || defined(__KERNEL__)
-#define __SWAB_64_THRU_32__
-#endif
-
-#endif /* _ASM_MICROBLAZE_SWAB_H */
+#include <asm-generic/swab.h>
diff --git a/arch/microblaze/include/asm/syscalls.h b/arch/microblaze/include/asm/syscalls.h
index ddea9eb31f8d..720761cc741f 100644
--- a/arch/microblaze/include/asm/syscalls.h
+++ b/arch/microblaze/include/asm/syscalls.h
@@ -1,48 +1,8 @@
 #ifndef __ASM_MICROBLAZE_SYSCALLS_H
-#define __ASM_MICROBLAZE_SYSCALLS_H
-#ifdef __KERNEL__
 
-#include <linux/compiler.h>
-#include <linux/linkage.h>
-#include <linux/types.h>
-#include <linux/signal.h>
+asmlinkage long sys_clone(int flags, unsigned long stack, struct pt_regs *regs);
+#define sys_clone sys_clone
 
-/* FIXME will be removed */
-asmlinkage int sys_ipc(uint call, int first, int second,
-				int third, void *ptr, long fifth);
+#include <asm-generic/syscalls.h>
 
-struct pt_regs;
-asmlinkage int sys_vfork(struct pt_regs *regs);
-asmlinkage int sys_clone(int flags, unsigned long stack, struct pt_regs *regs);
-asmlinkage int sys_execve(char __user *filenamei, char __user *__user *argv,
-			char __user *__user *envp, struct pt_regs *regs);
-
-asmlinkage unsigned long sys_mmap2(unsigned long addr, size_t len,
-			unsigned long prot, unsigned long flags,
-			unsigned long fd, unsigned long pgoff);
-
-asmlinkage unsigned long sys_mmap(unsigned long addr, size_t len,
-			unsigned long prot, unsigned long flags,
-			unsigned long fd, off_t offset);
-
-/* from signal.c */
-asmlinkage int sys_sigsuspend(old_sigset_t mask, struct pt_regs *regs);
-
-asmlinkage int sys_rt_sigsuspend(sigset_t __user *unewset, size_t sigsetsize,
-		struct pt_regs *regs);
-
-asmlinkage int sys_sigaction(int sig, const struct old_sigaction *act,
-		struct old_sigaction *oact);
-
-asmlinkage long sys_rt_sigaction(int sig, const struct sigaction __user *act,
-		struct sigaction __user *oact, size_t sigsetsize);
-
-asmlinkage int sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss,
-		struct pt_regs *regs);
-
-asmlinkage int sys_sigreturn(struct pt_regs *regs);
-
-asmlinkage int sys_rt_sigreturn(struct pt_regs *regs);
-
-#endif /* __KERNEL__ */
 #endif /* __ASM_MICROBLAZE_SYSCALLS_H */
diff --git a/arch/microblaze/include/asm/system.h b/arch/microblaze/include/asm/system.h
index c4e308850b5d..b1ed61590660 100644
--- a/arch/microblaze/include/asm/system.h
+++ b/arch/microblaze/include/asm/system.h
@@ -13,6 +13,9 @@
 #include <asm/setup.h>
 #include <asm/irqflags.h>
 
+#include <asm-generic/cmpxchg.h>
+#include <asm-generic/cmpxchg-local.h>
+
 struct task_struct;
 struct thread_info;
 
diff --git a/arch/microblaze/include/asm/termbits.h b/arch/microblaze/include/asm/termbits.h
index a1b64bc4724a..3935b106de79 100644
--- a/arch/microblaze/include/asm/termbits.h
+++ b/arch/microblaze/include/asm/termbits.h
@@ -1,203 +1 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_TERMBITS_H
-#define _ASM_MICROBLAZE_TERMBITS_H
-
-#include <linux/posix_types.h>
-
-typedef unsigned char	cc_t;
-typedef unsigned int	speed_t;
-typedef unsigned int	tcflag_t;
-
-#define NCCS 19
-struct termios {
-	tcflag_t c_iflag; /* input mode flags */
-	tcflag_t c_oflag; /* output mode flags */
-	tcflag_t c_cflag; /* control mode flags */
-	tcflag_t c_lflag; /* local mode flags */
-	cc_t c_line; /* line discipline */
-	cc_t c_cc[NCCS]; /* control characters */
-};
-
-struct ktermios {
-	tcflag_t c_iflag; /* input mode flags */
-	tcflag_t c_oflag; /* output mode flags */
-	tcflag_t c_cflag; /* control mode flags */
-	tcflag_t c_lflag; /* local mode flags */
-	cc_t c_line; /* line discipline */
-	cc_t c_cc[NCCS]; /* control characters */
-	speed_t c_ispeed; /* input speed */
-	speed_t c_ospeed; /* output speed */
-};
-
-/* c_cc characters */
-
-#define VINTR 0
-#define VQUIT 1
-#define VERASE 2
-#define VKILL 3
-#define VEOF 4
-#define VTIME 5
-#define VMIN 6
-#define VSWTC 7
-#define VSTART 8
-#define VSTOP 9
-#define VSUSP 10
-#define VEOL 11
-#define VREPRINT 12
-#define VDISCARD 13
-#define VWERASE 14
-#define VLNEXT 15
-#define VEOL2 16
-
-/* c_iflag bits */
-
-#define IGNBRK	0000001
-#define BRKINT	0000002
-#define IGNPAR	0000004
-#define PARMRK	0000010
-#define INPCK	0000020
-#define ISTRIP	0000040
-#define INLCR	0000100
-#define IGNCR	0000200
-#define ICRNL	0000400
-#define IUCLC	0001000
-#define IXON	0002000
-#define IXANY	0004000
-#define IXOFF	0010000
-#define IMAXBEL	0020000
-#define IUTF8	0040000
-
-/* c_oflag bits */
-
-#define OPOST	0000001
-#define OLCUC	0000002
-#define ONLCR	0000004
-#define OCRNL	0000010
-#define ONOCR	0000020
-#define ONLRET	0000040
-#define OFILL	0000100
-#define OFDEL	0000200
-#define NLDLY	0000400
-#define NL0	0000000
-#define NL1	0000400
-#define CRDLY	0003000
-#define CR0	0000000
-#define CR1	0001000
-#define CR2	0002000
-#define CR3	0003000
-#define TABDLY	0014000
-#define TAB0	0000000
-#define TAB1	0004000
-#define TAB2	0010000
-#define TAB3	0014000
-#define XTABS	0014000
-#define BSDLY	0020000
-#define BS0	0000000
-#define BS1	0020000
-#define VTDLY	0040000
-#define VT0	0000000
-#define VT1	0040000
-#define FFDLY	0100000
-#define FF0	0000000
-#define FF1	0100000
-
-/* c_cflag bit meaning */
-
-#define CBAUD	0010017
-#define B0	0000000 /* hang up */
-#define B50	0000001
-#define B75	0000002
-#define B110	0000003
-#define B134	0000004
-#define B150	0000005
-#define B200	0000006
-#define B300	0000007
-#define B600	0000010
-#define B1200	0000011
-#define B1800	0000012
-#define B2400	0000013
-#define B4800	0000014
-#define B9600	0000015
-#define B19200	0000016
-#define B38400	0000017
-#define EXTA B19200
-#define EXTB B38400
-#define CSIZE	0000060
-#define CS5	0000000
-#define CS6	0000020
-#define CS7	0000040
-#define CS8	0000060
-#define CSTOPB	0000100
-#define CREAD	0000200
-#define PARENB	0000400
-#define PARODD	0001000
-#define HUPCL	0002000
-#define CLOCAL	0004000
-#define CBAUDEX	0010000
-#define B57600	0010001
-#define B115200	0010002
-#define B230400	0010003
-#define B460800	0010004
-#define B500000	0010005
-#define B576000	0010006
-#define B921600	0010007
-#define BOTHER		0010000
-#define B1000000	0010010
-#define B1152000	0010011
-#define B1500000	0010012
-#define B2000000	0010013
-#define B2500000	0010014
-#define B3000000	0010015
-#define B3500000	0010016
-#define B4000000	0010017
-#define CIBAUD		002003600000 /* input baud rate (not used) */
-#define CMSPAR		010000000000 /* mark or space (stick) parity */
-#define CRTSCTS		020000000000 /* flow control */
-
-#define IBSHIFT	16		/* Shift from CBAUD to CIBAUD */
-
-/* c_lflag bits */
-
-#define ISIG	0000001
-#define ICANON	0000002
-#define XCASE	0000004
-#define ECHO	0000010
-#define ECHOE	0000020
-#define ECHOK	0000040
-#define ECHONL	0000100
-#define NOFLSH	0000200
-#define TOSTOP	0000400
-#define ECHOCTL	0001000
-#define ECHOPRT	0002000
-#define ECHOKE	0004000
-#define FLUSHO	0010000
-#define PENDIN	0040000
-#define IEXTEN	0100000
-
-/* tcflow() and TCXONC use these */
-
-#define	TCOOFF		0
-#define	TCOON		1
-#define	TCIOFF		2
-#define	TCION		3
-
-/* tcflush() and TCFLSH use these */
-
-#define	TCIFLUSH	0
-#define	TCOFLUSH	1
-#define	TCIOFLUSH	2
-
-/* tcsetattr uses these */
-
-#define	TCSANOW		0
-#define	TCSADRAIN	1
-#define	TCSAFLUSH	2
-
-#endif /* _ASM_MICROBLAZE_TERMBITS_H */
+#include <asm-generic/termbits.h>
diff --git a/arch/microblaze/include/asm/termios.h b/arch/microblaze/include/asm/termios.h
index 47a46d1fbe26..280d78a9d966 100644
--- a/arch/microblaze/include/asm/termios.h
+++ b/arch/microblaze/include/asm/termios.h
@@ -1,88 +1 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_TERMIOS_H
-#define _ASM_MICROBLAZE_TERMIOS_H
-
-#include <linux/string.h>
-#include <asm/termbits.h>
-#include <asm/ioctls.h>
-
-struct winsize {
-	unsigned short ws_row;
-	unsigned short ws_col;
-	unsigned short ws_xpixel;
-	unsigned short ws_ypixel;
-};
-
-#define NCC 8
-struct termio {
-	unsigned short c_iflag; /* input mode flags */
-	unsigned short c_oflag; /* output mode flags */
-	unsigned short c_cflag; /* control mode flags */
-	unsigned short c_lflag; /* local mode flags */
-	unsigned char c_line; /* line discipline */
-	unsigned char c_cc[NCC]; /* control characters */
-};
-
-#ifdef __KERNEL__
-/*	intr=^C		quit=^|		erase=del	kill=^U
-	eof=^D		vtime=\0	vmin=\1		sxtc=\0
-	start=^Q	stop=^S		susp=^Z		eol=\0
-	reprint=^R	discard=^U	werase=^W	lnext=^V
-	eol2=\0
-*/
-#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0"
-#endif
-
-/* Modem lines */
-
-#define TIOCM_LE	0x001
-#define TIOCM_DTR	0x002
-#define TIOCM_RTS	0x004
-#define TIOCM_ST	0x008
-#define TIOCM_SR	0x010
-#define TIOCM_CTS	0x020
-#define TIOCM_CAR	0x040
-#define TIOCM_RNG	0x080
-#define TIOCM_DSR	0x100
-#define TIOCM_CD	TIOCM_CAR
-#define TIOCM_RI	TIOCM_RNG
-#define TIOCM_OUT1	0x2000
-#define TIOCM_OUT2	0x4000
-#define TIOCM_LOOP	0x8000
-
-/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
-
-/* Line disciplines */
-
-#define N_TTY		0
-#define N_SLIP		1
-#define N_MOUSE		2
-#define N_PPP		3
-#define N_STRIP		4
-#define N_AX25		5
-#define N_X25		6 /* X.25 async */
-#define N_6PACK		7
-#define N_MASC		8 /* Reserved for Mobitex module <kaz@cafe.net> */
-#define N_R3964		9 /* Reserved for Simatic R3964 module */
-#define N_PROFIBUS_FDL	10 /* Reserved for Profibus <Dave@mvhi.com> */
-#define N_IRDA		11 /* Linux IR - http://irda.sourceforge.net/ */
-#define N_SMSBLOCK	12 /* SMS block mode - for talking to GSM data cards
-				about SMS messages */
-#define N_HDLC		13 /* synchronous HDLC */
-#define N_SYNC_PPP	14
-#define N_HCI		15 /* Bluetooth HCI UART */
-
-#ifdef __KERNEL__
-
-#include <asm-generic/termios-base.h>
-
-#endif	/* __KERNEL__ */
-
-#endif /* _ASM_MICROBLAZE_TERMIOS_H */
+#include <asm-generic/termios.h>
diff --git a/arch/microblaze/include/asm/thread_info.h b/arch/microblaze/include/asm/thread_info.h
index 7fac44498445..6e92885d381a 100644
--- a/arch/microblaze/include/asm/thread_info.h
+++ b/arch/microblaze/include/asm/thread_info.h
@@ -75,8 +75,6 @@ struct thread_info {
 
 /*
  * macros/functions for gaining access to the thread information structure
- *
- * preempt_count needs to be 1 initially, until the scheduler is functional.
  */
 #define INIT_THREAD_INFO(tsk)			\
 {						\
@@ -84,7 +82,7 @@ struct thread_info {
 	.exec_domain	= &default_exec_domain,	\
 	.flags		= 0,			\
 	.cpu		= 0,			\
-	.preempt_count	= 1,			\
+	.preempt_count	= INIT_PREEMPT_COUNT,	\
 	.addr_limit	= KERNEL_DS,		\
 	.restart_block = {			\
 		.fn = do_no_restart_syscall,	\
diff --git a/arch/microblaze/include/asm/timex.h b/arch/microblaze/include/asm/timex.h
index 678525dc6d0b..befcf3de5532 100644
--- a/arch/microblaze/include/asm/timex.h
+++ b/arch/microblaze/include/asm/timex.h
@@ -9,10 +9,8 @@
 #ifndef _ASM_MICROBLAZE_TIMEX_H
 #define _ASM_MICROBLAZE_TIMEX_H
 
-#define CLOCK_TICK_RATE 1000 /* Timer input freq. */
-
-typedef unsigned long cycles_t;
+#include <asm-generic/timex.h>
 
-#define get_cycles()	(0)
+#define CLOCK_TICK_RATE 1000 /* Timer input freq. */
 
 #endif /* _ASM_TIMEX_H */
diff --git a/arch/microblaze/include/asm/types.h b/arch/microblaze/include/asm/types.h
index bebc018318f5..b9e79bc580dd 100644
--- a/arch/microblaze/include/asm/types.h
+++ b/arch/microblaze/include/asm/types.h
@@ -1,38 +1 @@
-/*
- * Copyright (C) Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_TYPES_H
-#define _ASM_MICROBLAZE_TYPES_H
-
-/*
- * This file is never included by application software unless
- * explicitly requested (e.g., via linux/types.h) in which case the
- * application is Linux specific so (user-) name space pollution is
- * not a major issue.  However, for interoperability, libraries still
- * need to be careful to avoid a name clashes.
- */
-
-#include <asm-generic/int-ll64.h>
-
-# ifndef __ASSEMBLY__
-
-typedef unsigned short umode_t;
-
-/*
- * These aren't exported outside the kernel to avoid name space clashes
- */
-#  ifdef __KERNEL__
-#  define BITS_PER_LONG 32
-
-/* Dma addresses are 32-bits wide. */
-
-typedef u32 dma_addr_t;
-
-#  endif/* __KERNEL__ */
-# endif /* __ASSEMBLY__ */
-#endif /* _ASM_MICROBLAZE_TYPES_H */
+#include <asm-generic/types.h>
diff --git a/arch/microblaze/include/asm/ucontext.h b/arch/microblaze/include/asm/ucontext.h
index 11f6bb3ae3a4..9bc07b9f30fb 100644
--- a/arch/microblaze/include/asm/ucontext.h
+++ b/arch/microblaze/include/asm/ucontext.h
@@ -1,22 +1 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_UCONTEXT_H
-#define _ASM_MICROBLAZE_UCONTEXT_H
-
-#include <asm/sigcontext.h>
-
-struct ucontext {
-	unsigned long		uc_flags;
-	struct ucontext		*uc_link;
-	stack_t			uc_stack;
-	struct sigcontext	uc_mcontext;
-	sigset_t		uc_sigmask; /* mask last for extensibility */
-};
-
-#endif /* _ASM_MICROBLAZE_UCONTEXT_H */
+#include <asm-generic/ucontext.h>
diff --git a/arch/microblaze/include/asm/unistd.h b/arch/microblaze/include/asm/unistd.h
index b5e2f5fa5c53..0b852327c0e7 100644
--- a/arch/microblaze/include/asm/unistd.h
+++ b/arch/microblaze/include/asm/unistd.h
@@ -380,8 +380,10 @@
 #define __NR_accept04		362 /* new */
 #define __NR_preadv		363 /* new */
 #define __NR_pwritev		364 /* new */
+#define __NR_rt_tgsigqueueinfo	365 /* new */
+#define __NR_perf_counter_open	366 /* new */
 
-#define __NR_syscalls		365
+#define __NR_syscalls		367
 
 #ifdef __KERNEL__
 #ifndef __ASSEMBLY__
@@ -408,7 +410,7 @@
 #define __ARCH_WANT_SYS_SIGPENDING
 #define __ARCH_WANT_SYS_SIGPROCMASK
 #define __ARCH_WANT_SYS_RT_SIGACTION
-/* #define __ARCH_WANT_SYS_RT_SIGSUSPEND */
+#define __ARCH_WANT_SYS_RT_SIGSUSPEND
 
 /*
  * "Conditional" syscalls
diff --git a/arch/microblaze/include/asm/vga.h b/arch/microblaze/include/asm/vga.h
index 8b137891791f..89d82fd8fcf1 100644
--- a/arch/microblaze/include/asm/vga.h
+++ b/arch/microblaze/include/asm/vga.h
@@ -1 +1 @@
-
+#include <asm-generic/vga.h>
diff --git a/arch/microblaze/kernel/entry-nommu.S b/arch/microblaze/kernel/entry-nommu.S
index 1fce6b803f54..9083d85376a4 100644
--- a/arch/microblaze/kernel/entry-nommu.S
+++ b/arch/microblaze/kernel/entry-nommu.S
@@ -551,30 +551,22 @@ no_work_pending:
 	rtid	r14, 0
 	nop
 
-sys_vfork_wrapper:
-	brid	sys_vfork
+sys_vfork:
+	brid	microblaze_vfork
 	addk	r5, r1, r0
 
-sys_clone_wrapper:
-	brid	sys_clone
+sys_clone:
+	brid	microblaze_clone
 	addk	r7, r1, r0
 
-sys_execve_wrapper:
-	brid	sys_execve
+sys_execve:
+	brid	microblaze_execve
 	addk	r8, r1, r0
 
-sys_sigreturn_wrapper:
-	brid	sys_sigreturn
-	addk	r5, r1, r0
-
 sys_rt_sigreturn_wrapper:
 	brid	sys_rt_sigreturn
 	addk	r5, r1, r0
 
-sys_sigsuspend_wrapper:
-	brid	sys_rt_sigsuspend
-	addk	r6, r1, r0
-
 sys_rt_sigsuspend_wrapper:
 	brid	sys_rt_sigsuspend
 	addk	r7, r1, r0
diff --git a/arch/microblaze/kernel/entry.S b/arch/microblaze/kernel/entry.S
index 91a0e7b185dd..c7353e79f4a2 100644
--- a/arch/microblaze/kernel/entry.S
+++ b/arch/microblaze/kernel/entry.S
@@ -429,12 +429,11 @@ C_ENTRY(ret_from_fork):
 	brid	ret_from_trap;	/* Do normal trap return */
 	nop;
 
-C_ENTRY(sys_vfork_wrapper):
+C_ENTRY(sys_vfork):
+	brid	microblaze_vfork	/* Do real work (tail-call) */
 	la	r5, r1, PTO
-	brid	sys_vfork	/* Do real work (tail-call) */
-	nop
 
-C_ENTRY(sys_clone_wrapper):
+C_ENTRY(sys_clone):
 	bnei	r6, 1f;			/* See if child SP arg (arg 1) is 0. */
 	lwi	r6, r1, PTO+PT_R1;	/* If so, use paret's stack ptr */
 1:	la	r7, r1, PTO;			/* Arg 2: parent context */
@@ -444,20 +443,9 @@ C_ENTRY(sys_clone_wrapper):
 	brid	do_fork		/* Do real work (tail-call) */
 	nop;
 
-C_ENTRY(sys_execve_wrapper):
+C_ENTRY(sys_execve):
 	la	r8, r1, PTO;		/* add user context as 4th arg */
-	brid	sys_execve;	/* Do real work (tail-call).*/
-	nop;
-
-C_ENTRY(sys_sigsuspend_wrapper):
-	swi	r3, r1, PTO+PT_R3; /* restore saved r3, r4 registers */
-	swi	r4, r1, PTO+PT_R4;
-	la	r6, r1, PTO;		/* add user context as 2nd arg */
-	bralid	r15, sys_sigsuspend; /* Do real work.*/
-	nop;
-	lwi	r3, r1, PTO+PT_R3; /* restore saved r3, r4 registers */
-	lwi	r4, r1, PTO+PT_R4;
-	bri ret_from_trap /* fall through will not work here due to align */
+	brid	microblaze_execve;	/* Do real work (tail-call).*/
 	nop;
 
 C_ENTRY(sys_rt_sigsuspend_wrapper):
@@ -471,18 +459,6 @@ C_ENTRY(sys_rt_sigsuspend_wrapper):
 	bri ret_from_trap /* fall through will not work here due to align */
 	nop;
 
-
-C_ENTRY(sys_sigreturn_wrapper):
-	swi	r3, r1, PTO+PT_R3; /* restore saved r3, r4 registers */
-	swi	r4, r1, PTO+PT_R4;
-	la	r5, r1, PTO;		/* add user context as 1st arg */
-	brlid	r15, sys_sigreturn;	/* Do real work.*/
-	nop;
-	lwi	r3, r1, PTO+PT_R3; /* restore saved r3, r4 registers */
-	lwi	r4, r1, PTO+PT_R4;
-	bri ret_from_trap /* fall through will not work here due to align */
-	nop;
-
 C_ENTRY(sys_rt_sigreturn_wrapper):
 	swi	r3, r1, PTO+PT_R3; /* restore saved r3, r4 registers */
 	swi	r4, r1, PTO+PT_R4;
diff --git a/arch/microblaze/kernel/signal.c b/arch/microblaze/kernel/signal.c
index 4c0e6521b114..493819c25fba 100644
--- a/arch/microblaze/kernel/signal.c
+++ b/arch/microblaze/kernel/signal.c
@@ -45,91 +45,8 @@
 
 asmlinkage int do_signal(struct pt_regs *regs, sigset_t *oldset, int in_sycall);
 
-/*
- * Atomically swap in the new signal mask, and wait for a signal.
- */
-asmlinkage int
-sys_sigsuspend(old_sigset_t mask, struct pt_regs *regs)
-{
-	sigset_t saveset;
-
-	mask &= _BLOCKABLE;
-	spin_lock_irq(&current->sighand->siglock);
-	saveset = current->blocked;
-	siginitset(&current->blocked, mask);
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
-
-	regs->r3 = -EINTR;
-	while (1) {
-		current->state = TASK_INTERRUPTIBLE;
-		schedule();
-		if (do_signal(regs, &saveset, 1))
-			return -EINTR;
-	}
-}
-
-asmlinkage int
-sys_rt_sigsuspend(sigset_t __user *unewset, size_t sigsetsize,
-		struct pt_regs *regs)
-{
-	sigset_t saveset, newset;
-
-	/* XXX: Don't preclude handling different sized sigset_t's. */
-	if (sigsetsize != sizeof(sigset_t))
-		return -EINVAL;
-
-	if (copy_from_user(&newset, unewset, sizeof(newset)))
-		return -EFAULT;
-	sigdelsetmask(&newset, ~_BLOCKABLE);
-	spin_lock_irq(&current->sighand->siglock);
-	saveset = current->blocked;
-	current->blocked = newset;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
-
-	regs->r3 = -EINTR;
-	while (1) {
-		current->state = TASK_INTERRUPTIBLE;
-		schedule();
-		if (do_signal(regs, &saveset, 1))
-			return -EINTR;
-	}
-}
-
-asmlinkage int
-sys_sigaction(int sig, const struct old_sigaction *act,
-		struct old_sigaction *oact)
-{
-	struct k_sigaction new_ka, old_ka;
-	int ret;
-
-	if (act) {
-		old_sigset_t mask;
-		if (!access_ok(VERIFY_READ, act, sizeof(*act)) ||
-			__get_user(new_ka.sa.sa_handler, &act->sa_handler) ||
-			__get_user(new_ka.sa.sa_restorer, &act->sa_restorer))
-			return -EFAULT;
-		__get_user(new_ka.sa.sa_flags, &act->sa_flags);
-		__get_user(mask, &act->sa_mask);
-		siginitset(&new_ka.sa.sa_mask, mask);
-	}
 
-	ret = do_sigaction(sig, act ? &new_ka : NULL, oact ? &old_ka : NULL);
-
-	if (!ret && oact) {
-		if (!access_ok(VERIFY_WRITE, oact, sizeof(*oact)) ||
-			__put_user(old_ka.sa.sa_handler, &oact->sa_handler) ||
-			__put_user(old_ka.sa.sa_restorer, &oact->sa_restorer))
-			return -EFAULT;
-		__put_user(old_ka.sa.sa_flags, &oact->sa_flags);
-		__put_user(old_ka.sa.sa_mask.sig[0], &oact->sa_mask);
-	}
-
-	return ret;
-}
-
-asmlinkage int
+asmlinkage long
 sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss,
 		struct pt_regs *regs)
 {
@@ -139,7 +56,6 @@ sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss,
 /*
  * Do a signal return; undo the signal stack.
  */
-
 struct sigframe {
 	struct sigcontext sc;
 	unsigned long extramask[_NSIG_WORDS-1];
@@ -176,40 +92,7 @@ static int restore_sigcontext(struct pt_regs *regs,
 	return err;
 }
 
-asmlinkage int sys_sigreturn(struct pt_regs *regs)
-{
-	struct sigframe *frame =
-			(struct sigframe *)(regs->r1 + STATE_SAVE_ARG_SPACE);
-
-	sigset_t set;
-	int rval;
-
-	if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
-		goto badframe;
-
-	if (__get_user(set.sig[0], &frame->sc.oldmask)
-		|| (_NSIG_WORDS > 1
-		&& __copy_from_user(&set.sig[1], &frame->extramask,
-					sizeof(frame->extramask))))
-		goto badframe;
-
-	sigdelsetmask(&set, ~_BLOCKABLE);
-
-	spin_lock_irq(&current->sighand->siglock);
-	current->blocked = set;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
-
-	if (restore_sigcontext(regs, &frame->sc, &rval))
-		goto badframe;
-	return rval;
-
-badframe:
-	force_sig(SIGSEGV, current);
-	return 0;
-}
-
-asmlinkage int sys_rt_sigreturn(struct pt_regs *regs)
+asmlinkage long sys_rt_sigreturn(struct pt_regs *regs)
 {
 	struct rt_sigframe __user *frame =
 		(struct rt_sigframe __user *)(regs->r1 + STATE_SAVE_ARG_SPACE);
@@ -324,21 +207,17 @@ static void setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 	/* Set up to return from userspace. If provided, use a stub
 	 already in userspace. */
 	/* minus 8 is offset to cater for "rtsd r15,8" */
-	if (ka->sa.sa_flags & SA_RESTORER) {
-		regs->r15 = ((unsigned long)ka->sa.sa_restorer)-8;
-	} else {
-		/* addi r12, r0, __NR_sigreturn */
-		err |= __put_user(0x31800000 | __NR_rt_sigreturn ,
-				frame->tramp + 0);
-		/* brki r14, 0x8 */
-		err |= __put_user(0xb9cc0008, frame->tramp + 1);
-
-		/* Return from sighandler will jump to the tramp.
-		 Negative 8 offset because return is rtsd r15, 8 */
-		regs->r15 = ((unsigned long)frame->tramp)-8;
-
-		__invalidate_cache_sigtramp((unsigned long)frame->tramp);
-	}
+	/* addi r12, r0, __NR_sigreturn */
+	err |= __put_user(0x31800000 | __NR_rt_sigreturn ,
+			frame->tramp + 0);
+	/* brki r14, 0x8 */
+	err |= __put_user(0xb9cc0008, frame->tramp + 1);
+
+	/* Return from sighandler will jump to the tramp.
+	 Negative 8 offset because return is rtsd r15, 8 */
+	regs->r15 = ((unsigned long)frame->tramp)-8;
+
+	__invalidate_cache_sigtramp((unsigned long)frame->tramp);
 
 	if (err)
 		goto give_sigsegv;
@@ -405,7 +284,7 @@ do_restart:
  * OK, we're invoking a handler
  */
 
-static void
+static int
 handle_signal(unsigned long sig, struct k_sigaction *ka,
 		siginfo_t *info, sigset_t *oldset, struct pt_regs *regs)
 {
@@ -426,6 +305,7 @@ handle_signal(unsigned long sig, struct k_sigaction *ka,
 		recalc_sigpending();
 		spin_unlock_irq(&current->sighand->siglock);
 	}
+	return 1;
 }
 
 /*
@@ -456,7 +336,9 @@ int do_signal(struct pt_regs *regs, sigset_t *oldset, int in_syscall)
 	if (kernel_mode(regs))
 		return 1;
 
-	if (!oldset)
+	if (current_thread_info()->status & TS_RESTORE_SIGMASK)
+		oldset = &current->saved_sigmask;
+	else
 		oldset = &current->blocked;
 
 	signr = get_signal_to_deliver(&info, &ka, regs, NULL);
@@ -464,13 +346,31 @@ int do_signal(struct pt_regs *regs, sigset_t *oldset, int in_syscall)
 		/* Whee! Actually deliver the signal. */
 		if (in_syscall)
 			handle_restart(regs, &ka, 1);
-		handle_signal(signr, &ka, &info, oldset, regs);
+		if (handle_signal(signr, &ka, &info, oldset, regs)) {
+			/*
+			 * A signal was successfully delivered; the saved
+			 * sigmask will have been stored in the signal frame,
+			 * and will be restored by sigreturn, so we can simply
+			 * clear the TS_RESTORE_SIGMASK flag.
+			 */
+			current_thread_info()->status &=
+			    ~TS_RESTORE_SIGMASK;
+		}
 		return 1;
 	}
 
 	if (in_syscall)
 		handle_restart(regs, NULL, 0);
 
+	/*
+	 * If there's no signal to deliver, we just put the saved sigmask
+	 * back.
+	 */
+	if (current_thread_info()->status & TS_RESTORE_SIGMASK) {
+		current_thread_info()->status &= ~TS_RESTORE_SIGMASK;
+		sigprocmask(SIG_SETMASK, &current->saved_sigmask, NULL);
+	}
+
 	/* Did we come from a system call? */
 	return 0;
 }
diff --git a/arch/microblaze/kernel/sys_microblaze.c b/arch/microblaze/kernel/sys_microblaze.c
index 31905ff590b7..8c9ebac5da10 100644
--- a/arch/microblaze/kernel/sys_microblaze.c
+++ b/arch/microblaze/kernel/sys_microblaze.c
@@ -39,7 +39,7 @@
  *
  * This is really horribly ugly. This will be remove with new toolchain.
  */
-asmlinkage int
+asmlinkage long
 sys_ipc(uint call, int first, int second, int third, void *ptr, long fifth)
 {
 	int version, ret;
@@ -134,20 +134,20 @@ sys_ipc(uint call, int first, int second, int third, void *ptr, long fifth)
 	return ret;
 }
 
-asmlinkage int sys_vfork(struct pt_regs *regs)
+asmlinkage long microblaze_vfork(struct pt_regs *regs)
 {
 	return do_fork(CLONE_VFORK | CLONE_VM | SIGCHLD, regs->r1,
 						regs, 0, NULL, NULL);
 }
 
-asmlinkage int sys_clone(int flags, unsigned long stack, struct pt_regs *regs)
+asmlinkage long microblaze_clone(int flags, unsigned long stack, struct pt_regs *regs)
 {
 	if (!stack)
 		stack = regs->r1;
 	return do_fork(flags, stack, regs, 0, NULL, NULL);
 }
 
-asmlinkage int sys_execve(char __user *filenamei, char __user *__user *argv,
+asmlinkage long microblaze_execve(char __user *filenamei, char __user *__user *argv,
 			char __user *__user *envp, struct pt_regs *regs)
 {
 	int error;
@@ -163,8 +163,8 @@ out:
 	return error;
 }
 
-asmlinkage unsigned long
-sys_mmap2(unsigned long addr, size_t len,
+asmlinkage long
+sys_mmap2(unsigned long addr, unsigned long len,
 	unsigned long prot, unsigned long flags,
 	unsigned long fd, unsigned long pgoff)
 {
@@ -189,18 +189,18 @@ out:
 	return ret;
 }
 
-asmlinkage unsigned long sys_mmap(unsigned long addr, size_t len,
+asmlinkage long sys_mmap(unsigned long addr, unsigned long len,
 			unsigned long prot, unsigned long flags,
-			unsigned long fd, off_t offset)
+			unsigned long fd, off_t pgoff)
 {
 	int err = -EINVAL;
 
-	if (offset & ~PAGE_MASK) {
+	if (pgoff & ~PAGE_MASK) {
 		printk(KERN_INFO "no pagemask in mmap\r\n");
 		goto out;
 	}
 
-	err = sys_mmap2(addr, len, prot, flags, fd, offset >> PAGE_SHIFT);
+	err = sys_mmap2(addr, len, prot, flags, fd, pgoff >> PAGE_SHIFT);
 out:
 	return err;
 }
diff --git a/arch/microblaze/kernel/syscall_table.S b/arch/microblaze/kernel/syscall_table.S
index 376d1789f7c0..31b32a6c5f4e 100644
--- a/arch/microblaze/kernel/syscall_table.S
+++ b/arch/microblaze/kernel/syscall_table.S
@@ -15,7 +15,7 @@ ENTRY(sys_call_table)
 	.long sys_creat
 	.long sys_link
 	.long sys_unlink		/* 10 */
-	.long sys_execve_wrapper
+	.long sys_execve
 	.long sys_chdir
 	.long sys_time
 	.long sys_mknod
@@ -71,12 +71,12 @@ ENTRY(sys_call_table)
 	.long sys_getppid
 	.long sys_getpgrp		/* 65 */
 	.long sys_setsid
-	.long sys_sigaction
+	.long sys_ni_syscall		/* sys_sigaction */
 	.long sys_sgetmask
 	.long sys_ssetmask
 	.long sys_setreuid		/* 70 */
 	.long sys_setregid
-	.long sys_sigsuspend_wrapper
+	.long sys_ni_syscall		/* sys_sigsuspend_wrapper */
 	.long sys_sigpending
 	.long sys_sethostname
 	.long sys_setrlimit		/* 75 */
@@ -123,8 +123,8 @@ ENTRY(sys_call_table)
 	.long sys_sysinfo
 	.long sys_ipc
 	.long sys_fsync
-	.long sys_sigreturn_wrapper
-	.long sys_clone_wrapper		/* 120 */
+	.long sys_ni_syscall		/* sys_sigreturn_wrapper */
+	.long sys_clone		/* 120 */
 	.long sys_setdomainname
 	.long sys_newuname
 	.long sys_ni_syscall		/* modify_ldt */
@@ -194,7 +194,7 @@ ENTRY(sys_call_table)
 	.long sys_sendfile
 	.long sys_ni_syscall		/* reserved for streams1 */
 	.long sys_ni_syscall		/* reserved for streams2 */
-	.long sys_vfork_wrapper		/* 190 */
+	.long sys_vfork		/* 190 */
 	.long sys_getrlimit
 	.long sys_mmap2			/* mmap2 */
 	.long sys_truncate64
@@ -369,3 +369,5 @@ ENTRY(sys_call_table)
 	.long sys_ni_syscall
 	.long sys_ni_syscall
 	.long sys_ni_syscall
+	.long sys_rt_tgsigqueueinfo	/* 365 */
+	.long sys_perf_counter_open
diff --git a/arch/microblaze/lib/Makefile b/arch/microblaze/lib/Makefile
index 71c8cb6c9e43..b579db068c06 100644
--- a/arch/microblaze/lib/Makefile
+++ b/arch/microblaze/lib/Makefile
@@ -2,7 +2,7 @@
 # Makefile
 #
 
-lib-y :=  memset.o checksum.o
+lib-y :=  memset.o
 
 ifeq ($(CONFIG_OPT_LIB_ASM),y)
 lib-y += fastcopy.o
diff --git a/arch/microblaze/lib/checksum.c b/arch/microblaze/lib/checksum.c
deleted file mode 100644
index f08e74591418..000000000000
--- a/arch/microblaze/lib/checksum.c
+++ /dev/null
@@ -1,172 +0,0 @@
-/*
- *
- * INET		An implementation of the TCP/IP protocol suite for the LINUX
- *		operating system.  INET is implemented using the  BSD Socket
- *		interface as the means of communication with the user level.
- *
- *		IP/TCP/UDP checksumming routines
- *
- * Authors:	Jorge Cwik, <jorge@laser.satlink.net>
- *		Arnt Gulbrandsen, <agulbra@nvg.unit.no>
- *		Tom May, <ftom@netcom.com>
- *		Andreas Schwab, <schwab@issan.informatik.uni-dortmund.de>
- *		Lots of code moved from tcp.c and ip.c; see those files
- *		for more names.
- *
- * 03/02/96	Jes Sorensen, Andreas Schwab, Roman Hodek:
- *		Fixed some nasty bugs, causing some horrible crashes.
- *		A: At some points, the sum (%0) was used as
- *		length-counter instead of the length counter
- *		(%1). Thanks to Roman Hodek for pointing this out.
- *		B: GCC seems to mess up if one uses too many
- *		data-registers to hold input values and one tries to
- *		specify d0 and d1 as scratch registers. Letting gcc
- *		choose these registers itself solves the problem.
- *
- *		This program is free software; you can redistribute it and/or
- *		modify it under the terms of the GNU General Public License
- *		as published by the Free Software Foundation; either version
- *		2 of the License, or (at your option) any later version.
- */
-
-/* Revised by Kenneth Albanowski for m68knommu. Basic problem: unaligned access
- kills, so most of the assembly has to go. */
-
-#include <linux/module.h>
-#include <net/checksum.h>
-
-#include <asm/byteorder.h>
-
-static inline unsigned short from32to16(unsigned long x)
-{
-	/* add up 16-bit and 16-bit for 16+c bit */
-	x = (x & 0xffff) + (x >> 16);
-	/* add up carry.. */
-	x = (x & 0xffff) + (x >> 16);
-	return x;
-}
-
-static unsigned int do_csum(const unsigned char *buff, int len)
-{
-	int odd, count;
-	unsigned long result = 0;
-
-	if (len <= 0)
-		goto out;
-	odd = 1 & (unsigned long) buff;
-	if (odd) {
-		result = *buff;
-		len--;
-		buff++;
-	}
-	count = len >> 1;		/* nr of 16-bit words.. */
-	if (count) {
-		if (2 & (unsigned long) buff) {
-			result += *(unsigned short *) buff;
-			count--;
-			len -= 2;
-			buff += 2;
-		}
-		count >>= 1;		/* nr of 32-bit words.. */
-		if (count) {
-			unsigned long carry = 0;
-			do {
-				unsigned long w = *(unsigned long *) buff;
-				count--;
-				buff += 4;
-				result += carry;
-				result += w;
-				carry = (w > result);
-			} while (count);
-			result += carry;
-			result = (result & 0xffff) + (result >> 16);
-		}
-		if (len & 2) {
-			result += *(unsigned short *) buff;
-			buff += 2;
-		}
-	}
-	if (len & 1)
-		result += (*buff << 8);
-	result = from32to16(result);
-	if (odd)
-		result = ((result >> 8) & 0xff) | ((result & 0xff) << 8);
-out:
-	return result;
-}
-
-/*
- *	This is a version of ip_compute_csum() optimized for IP headers,
- *	which always checksum on 4 octet boundaries.
- */
-__sum16 ip_fast_csum(const void *iph, unsigned int ihl)
-{
-	return (__force __sum16)~do_csum(iph, ihl*4);
-}
-EXPORT_SYMBOL(ip_fast_csum);
-
-/*
- * computes the checksum of a memory block at buff, length len,
- * and adds in "sum" (32-bit)
- *
- * returns a 32-bit number suitable for feeding into itself
- * or csum_tcpudp_magic
- *
- * this function must be called with even lengths, except
- * for the last fragment, which may be odd
- *
- * it's best to have buff aligned on a 32-bit boundary
- */
-__wsum csum_partial(const void *buff, int len, __wsum wsum)
-{
-	unsigned int sum = (__force unsigned int)wsum;
-	unsigned int result = do_csum(buff, len);
-
-	/* add in old sum, and carry.. */
-	result += sum;
-	if (sum > result)
-		result += 1;
-	return (__force __wsum)result;
-}
-EXPORT_SYMBOL(csum_partial);
-
-/*
- * this routine is used for miscellaneous IP-like checksums, mainly
- * in icmp.c
- */
-__sum16 ip_compute_csum(const void *buff, int len)
-{
-	return (__force __sum16)~do_csum(buff, len);
-}
-EXPORT_SYMBOL(ip_compute_csum);
-
-/*
- * copy from fs while checksumming, otherwise like csum_partial
- */
-__wsum
-csum_partial_copy_from_user(const void __user *src, void *dst, int len,
-						__wsum sum, int *csum_err)
-{
-	int missing;
-
-	missing = __copy_from_user(dst, src, len);
-	if (missing) {
-		memset(dst + len - missing, 0, missing);
-		*csum_err = -EFAULT;
-	} else
-		*csum_err = 0;
-
-	return csum_partial(dst, len, sum);
-}
-EXPORT_SYMBOL(csum_partial_copy_from_user);
-
-/*
- * copy from ds while checksumming, otherwise like csum_partial
- */
-__wsum
-csum_partial_copy(const void *src, void *dst, int len, __wsum sum)
-{
-	memcpy(dst, src, len);
-	return csum_partial(dst, len, sum);
-}
-EXPORT_SYMBOL(csum_partial_copy);
diff --git a/arch/microblaze/mm/init.c b/arch/microblaze/mm/init.c
index b5a701cd71e0..8d92c4efe9a4 100644
--- a/arch/microblaze/mm/init.c
+++ b/arch/microblaze/mm/init.c
@@ -80,15 +80,15 @@ void __init setup_memory(void)
 			memory_size = memory_end - memory_start;
 			PAGE_OFFSET = memory_start;
 			printk(KERN_INFO "%s: Main mem: 0x%x-0x%x, "
-				"size 0x%08x\n", __func__, memory_start,
-						memory_end, memory_size);
+				"size 0x%08x\n", __func__, (u32) memory_start,
+					(u32) memory_end, (u32) memory_size);
 			break;
 		}
 	}
 
 	if (!memory_start || !memory_end) {
 		panic("%s: Missing memory setting 0x%08x-0x%08x\n",
-			__func__, memory_start, memory_end);
+			__func__, (u32) memory_start, (u32) memory_end);
 	}
 
 	/* reservation of region where is the kernel */
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 8c4be1f301cf..3ca0fe1a9123 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -22,6 +22,26 @@ choice
 config MACH_ALCHEMY
 	bool "Alchemy processor based machines"
 
+config AR7
+	bool "Texas Instruments AR7"
+	select BOOT_ELF32
+	select DMA_NONCOHERENT
+	select CEVT_R4K
+	select CSRC_R4K
+	select IRQ_CPU
+	select NO_EXCEPT_FILL
+	select SWAP_IO_SPACE
+	select SYS_HAS_CPU_MIPS32_R1
+	select SYS_HAS_EARLY_PRINTK
+	select SYS_SUPPORTS_32BIT_KERNEL
+	select SYS_SUPPORTS_LITTLE_ENDIAN
+	select GENERIC_GPIO
+	select GCD
+	select VLYNQ
+	help
+	  Support for the Texas Instruments AR7 System-on-a-Chip
+	  family: TNETD7100, 7200 and 7300.
+
 config BASLER_EXCITE
 	bool "Basler eXcite smart camera"
 	select CEVT_R4K
@@ -209,7 +229,7 @@ config MIPS_MALTA
 	select SYS_SUPPORTS_64BIT_KERNEL
 	select SYS_SUPPORTS_BIG_ENDIAN
 	select SYS_SUPPORTS_LITTLE_ENDIAN
-	select SYS_SUPPORTS_MIPS_CMP if BROKEN	# because SYNC_R4K is broken
+	select SYS_SUPPORTS_MIPS_CMP
 	select SYS_SUPPORTS_MULTITHREADING
 	select SYS_SUPPORTS_SMARTMIPS
 	help
@@ -247,6 +267,7 @@ config MACH_VR41XX
 	select CEVT_R4K
 	select CSRC_R4K
 	select SYS_HAS_CPU_VR41XX
+	select ARCH_REQUIRE_GPIOLIB
 
 config NXP_STB220
 	bool "NXP STB220 board"
@@ -1635,7 +1656,7 @@ config MIPS_APSP_KSPD
 config MIPS_CMP
 	bool "MIPS CMP framework support"
 	depends on SYS_SUPPORTS_MIPS_CMP
-	select SYNC_R4K if BROKEN
+	select SYNC_R4K
 	select SYS_SUPPORTS_SMP
 	select SYS_SUPPORTS_SCHED_SMT if SMP
 	select WEAK_ORDERING
@@ -2147,11 +2168,11 @@ menu "Power management options"
 
 config ARCH_HIBERNATION_POSSIBLE
 	def_bool y
-	depends on SYS_SUPPORTS_HOTPLUG_CPU
+	depends on SYS_SUPPORTS_HOTPLUG_CPU || !SMP
 
 config ARCH_SUSPEND_POSSIBLE
 	def_bool y
-	depends on SYS_SUPPORTS_HOTPLUG_CPU
+	depends on SYS_SUPPORTS_HOTPLUG_CPU || !SMP
 
 source "kernel/power/Kconfig"
 
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index 807572a6a4d2..861da514a468 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -173,6 +173,13 @@ libs-y				+= arch/mips/fw/lib/
 #
 
 #
+# Texas Instruments AR7
+#
+core-$(CONFIG_AR7)		+= arch/mips/ar7/
+cflags-$(CONFIG_AR7)		+= -I$(srctree)/arch/mips/include/asm/mach-ar7
+load-$(CONFIG_AR7)		+= 0xffffffff94100000
+
+#
 # Acer PICA 61, Mips Magnum 4000 and Olivetti M700.
 #
 core-$(CONFIG_MACH_JAZZ)	+= arch/mips/jazz/
diff --git a/arch/mips/ar7/Makefile b/arch/mips/ar7/Makefile
new file mode 100644
index 000000000000..7435e44b3964
--- /dev/null
+++ b/arch/mips/ar7/Makefile
@@ -0,0 +1,10 @@
+
+obj-y := \
+	prom.o \
+	setup.o \
+	memory.o \
+	irq.o \
+	time.o \
+	platform.o \
+	gpio.o \
+	clock.o
diff --git a/arch/mips/ar7/clock.c b/arch/mips/ar7/clock.c
new file mode 100644
index 000000000000..27dc6663f2fa
--- /dev/null
+++ b/arch/mips/ar7/clock.c
@@ -0,0 +1,440 @@
+/*
+ * Copyright (C) 2007 Felix Fietkau <nbd@openwrt.org>
+ * Copyright (C) 2007 Eugene Konev <ejka@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/gcd.h>
+#include <linux/io.h>
+
+#include <asm/addrspace.h>
+#include <asm/mach-ar7/ar7.h>
+
+#define BOOT_PLL_SOURCE_MASK	0x3
+#define CPU_PLL_SOURCE_SHIFT	16
+#define BUS_PLL_SOURCE_SHIFT	14
+#define USB_PLL_SOURCE_SHIFT	18
+#define DSP_PLL_SOURCE_SHIFT	22
+#define BOOT_PLL_SOURCE_AFE	0
+#define BOOT_PLL_SOURCE_BUS	0
+#define BOOT_PLL_SOURCE_REF	1
+#define BOOT_PLL_SOURCE_XTAL	2
+#define BOOT_PLL_SOURCE_CPU	3
+#define BOOT_PLL_BYPASS		0x00000020
+#define BOOT_PLL_ASYNC_MODE	0x02000000
+#define BOOT_PLL_2TO1_MODE	0x00008000
+
+#define TNETD7200_CLOCK_ID_CPU	0
+#define TNETD7200_CLOCK_ID_DSP	1
+#define TNETD7200_CLOCK_ID_USB	2
+
+#define TNETD7200_DEF_CPU_CLK	211000000
+#define TNETD7200_DEF_DSP_CLK	125000000
+#define TNETD7200_DEF_USB_CLK	48000000
+
+struct tnetd7300_clock {
+	u32 ctrl;
+#define PREDIV_MASK	0x001f0000
+#define PREDIV_SHIFT	16
+#define POSTDIV_MASK	0x0000001f
+	u32 unused1[3];
+	u32 pll;
+#define MUL_MASK	0x0000f000
+#define MUL_SHIFT	12
+#define PLL_MODE_MASK	0x00000001
+#define PLL_NDIV	0x00000800
+#define PLL_DIV		0x00000002
+#define PLL_STATUS	0x00000001
+	u32 unused2[3];
+};
+
+struct tnetd7300_clocks {
+	struct tnetd7300_clock bus;
+	struct tnetd7300_clock cpu;
+	struct tnetd7300_clock usb;
+	struct tnetd7300_clock dsp;
+};
+
+struct tnetd7200_clock {
+	u32 ctrl;
+	u32 unused1[3];
+#define DIVISOR_ENABLE_MASK 0x00008000
+	u32 mul;
+	u32 prediv;
+	u32 postdiv;
+	u32 postdiv2;
+	u32 unused2[6];
+	u32 cmd;
+	u32 status;
+	u32 cmden;
+	u32 padding[15];
+};
+
+struct tnetd7200_clocks {
+	struct tnetd7200_clock cpu;
+	struct tnetd7200_clock dsp;
+	struct tnetd7200_clock usb;
+};
+
+int ar7_cpu_clock = 150000000;
+EXPORT_SYMBOL(ar7_cpu_clock);
+int ar7_bus_clock = 125000000;
+EXPORT_SYMBOL(ar7_bus_clock);
+int ar7_dsp_clock;
+EXPORT_SYMBOL(ar7_dsp_clock);
+
+static void approximate(int base, int target, int *prediv,
+			int *postdiv, int *mul)
+{
+	int i, j, k, freq, res = target;
+	for (i = 1; i <= 16; i++)
+		for (j = 1; j <= 32; j++)
+			for (k = 1; k <= 32; k++) {
+				freq = abs(base / j * i / k - target);
+				if (freq < res) {
+					res = freq;
+					*mul = i;
+					*prediv = j;
+					*postdiv = k;
+				}
+			}
+}
+
+static void calculate(int base, int target, int *prediv, int *postdiv,
+	int *mul)
+{
+	int tmp_gcd, tmp_base, tmp_freq;
+
+	for (*prediv = 1; *prediv <= 32; (*prediv)++) {
+		tmp_base = base / *prediv;
+		tmp_gcd = gcd(target, tmp_base);
+		*mul = target / tmp_gcd;
+		*postdiv = tmp_base / tmp_gcd;
+		if ((*mul < 1) || (*mul >= 16))
+			continue;
+		if ((*postdiv > 0) & (*postdiv <= 32))
+			break;
+	}
+
+	if (base / *prediv * *mul / *postdiv != target) {
+		approximate(base, target, prediv, postdiv, mul);
+		tmp_freq = base / *prediv * *mul / *postdiv;
+		printk(KERN_WARNING
+		       "Adjusted requested frequency %d to %d\n",
+		       target, tmp_freq);
+	}
+
+	printk(KERN_DEBUG "Clocks: prediv: %d, postdiv: %d, mul: %d\n",
+	       *prediv, *postdiv, *mul);
+}
+
+static int tnetd7300_dsp_clock(void)
+{
+	u32 didr1, didr2;
+	u8 rev = ar7_chip_rev();
+	didr1 = readl((void *)KSEG1ADDR(AR7_REGS_GPIO + 0x18));
+	didr2 = readl((void *)KSEG1ADDR(AR7_REGS_GPIO + 0x1c));
+	if (didr2 & (1 << 23))
+		return 0;
+	if ((rev >= 0x23) && (rev != 0x57))
+		return 250000000;
+	if ((((didr2 & 0x1fff) << 10) | ((didr1 & 0xffc00000) >> 22))
+	    > 4208000)
+		return 250000000;
+	return 0;
+}
+
+static int tnetd7300_get_clock(u32 shift, struct tnetd7300_clock *clock,
+	u32 *bootcr, u32 bus_clock)
+{
+	int product;
+	int base_clock = AR7_REF_CLOCK;
+	u32 ctrl = readl(&clock->ctrl);
+	u32 pll = readl(&clock->pll);
+	int prediv = ((ctrl & PREDIV_MASK) >> PREDIV_SHIFT) + 1;
+	int postdiv = (ctrl & POSTDIV_MASK) + 1;
+	int divisor = prediv * postdiv;
+	int mul = ((pll & MUL_MASK) >> MUL_SHIFT) + 1;
+
+	switch ((*bootcr & (BOOT_PLL_SOURCE_MASK << shift)) >> shift) {
+	case BOOT_PLL_SOURCE_BUS:
+		base_clock = bus_clock;
+		break;
+	case BOOT_PLL_SOURCE_REF:
+		base_clock = AR7_REF_CLOCK;
+		break;
+	case BOOT_PLL_SOURCE_XTAL:
+		base_clock = AR7_XTAL_CLOCK;
+		break;
+	case BOOT_PLL_SOURCE_CPU:
+		base_clock = ar7_cpu_clock;
+		break;
+	}
+
+	if (*bootcr & BOOT_PLL_BYPASS)
+		return base_clock / divisor;
+
+	if ((pll & PLL_MODE_MASK) == 0)
+		return (base_clock >> (mul / 16 + 1)) / divisor;
+
+	if ((pll & (PLL_NDIV | PLL_DIV)) == (PLL_NDIV | PLL_DIV)) {
+		product = (mul & 1) ?
+			(base_clock * mul) >> 1 :
+			(base_clock * (mul - 1)) >> 2;
+		return product / divisor;
+	}
+
+	if (mul == 16)
+		return base_clock / divisor;
+
+	return base_clock * mul / divisor;
+}
+
+static void tnetd7300_set_clock(u32 shift, struct tnetd7300_clock *clock,
+	u32 *bootcr, u32 frequency)
+{
+	int prediv, postdiv, mul;
+	int base_clock = ar7_bus_clock;
+
+	switch ((*bootcr & (BOOT_PLL_SOURCE_MASK << shift)) >> shift) {
+	case BOOT_PLL_SOURCE_BUS:
+		base_clock = ar7_bus_clock;
+		break;
+	case BOOT_PLL_SOURCE_REF:
+		base_clock = AR7_REF_CLOCK;
+		break;
+	case BOOT_PLL_SOURCE_XTAL:
+		base_clock = AR7_XTAL_CLOCK;
+		break;
+	case BOOT_PLL_SOURCE_CPU:
+		base_clock = ar7_cpu_clock;
+		break;
+	}
+
+	calculate(base_clock, frequency, &prediv, &postdiv, &mul);
+
+	writel(((prediv - 1) << PREDIV_SHIFT) | (postdiv - 1), &clock->ctrl);
+	msleep(1);
+	writel(4, &clock->pll);
+	while (readl(&clock->pll) & PLL_STATUS)
+		;
+	writel(((mul - 1) << MUL_SHIFT) | (0xff << 3) | 0x0e, &clock->pll);
+	msleep(75);
+}
+
+static void __init tnetd7300_init_clocks(void)
+{
+	u32 *bootcr = (u32 *)ioremap_nocache(AR7_REGS_DCL, 4);
+	struct tnetd7300_clocks *clocks =
+					ioremap_nocache(UR8_REGS_CLOCKS,
+					sizeof(struct tnetd7300_clocks));
+
+	ar7_bus_clock = tnetd7300_get_clock(BUS_PLL_SOURCE_SHIFT,
+		&clocks->bus, bootcr, AR7_AFE_CLOCK);
+
+	if (*bootcr & BOOT_PLL_ASYNC_MODE)
+		ar7_cpu_clock = tnetd7300_get_clock(CPU_PLL_SOURCE_SHIFT,
+			&clocks->cpu, bootcr, AR7_AFE_CLOCK);
+	else
+		ar7_cpu_clock = ar7_bus_clock;
+
+	if (ar7_dsp_clock == 250000000)
+		tnetd7300_set_clock(DSP_PLL_SOURCE_SHIFT, &clocks->dsp,
+			bootcr, ar7_dsp_clock);
+
+	iounmap(clocks);
+	iounmap(bootcr);
+}
+
+static int tnetd7200_get_clock(int base, struct tnetd7200_clock *clock,
+	u32 *bootcr, u32 bus_clock)
+{
+	int divisor = ((readl(&clock->prediv) & 0x1f) + 1) *
+		((readl(&clock->postdiv) & 0x1f) + 1);
+
+	if (*bootcr & BOOT_PLL_BYPASS)
+		return base / divisor;
+
+	return base * ((readl(&clock->mul) & 0xf) + 1) / divisor;
+}
+
+
+static void tnetd7200_set_clock(int base, struct tnetd7200_clock *clock,
+	int prediv, int postdiv, int postdiv2, int mul, u32 frequency)
+{
+	printk(KERN_INFO
+		"Clocks: base = %d, frequency = %u, prediv = %d, "
+		"postdiv = %d, postdiv2 = %d, mul = %d\n",
+		base, frequency, prediv, postdiv, postdiv2, mul);
+
+	writel(0, &clock->ctrl);
+	writel(DIVISOR_ENABLE_MASK | ((prediv - 1) & 0x1F), &clock->prediv);
+	writel((mul - 1) & 0xF, &clock->mul);
+
+	while (readl(&clock->status) & 0x1)
+		; /* nop */
+
+	writel(DIVISOR_ENABLE_MASK | ((postdiv - 1) & 0x1F), &clock->postdiv);
+
+	writel(readl(&clock->cmden) | 1, &clock->cmden);
+	writel(readl(&clock->cmd) | 1, &clock->cmd);
+
+	while (readl(&clock->status) & 0x1)
+		; /* nop */
+
+	writel(DIVISOR_ENABLE_MASK | ((postdiv2 - 1) & 0x1F), &clock->postdiv2);
+
+	writel(readl(&clock->cmden) | 1, &clock->cmden);
+	writel(readl(&clock->cmd) | 1, &clock->cmd);
+
+	while (readl(&clock->status) & 0x1)
+		; /* nop */
+
+	writel(readl(&clock->ctrl) | 1, &clock->ctrl);
+}
+
+static int tnetd7200_get_clock_base(int clock_id, u32 *bootcr)
+{
+	if (*bootcr & BOOT_PLL_ASYNC_MODE)
+		/* Async */
+		switch (clock_id) {
+		case TNETD7200_CLOCK_ID_DSP:
+			return AR7_REF_CLOCK;
+		default:
+			return AR7_AFE_CLOCK;
+		}
+	else
+		/* Sync */
+		if (*bootcr & BOOT_PLL_2TO1_MODE)
+			/* 2:1 */
+			switch (clock_id) {
+			case TNETD7200_CLOCK_ID_DSP:
+				return AR7_REF_CLOCK;
+			default:
+				return AR7_AFE_CLOCK;
+			}
+		else
+			/* 1:1 */
+			return AR7_REF_CLOCK;
+}
+
+
+static void __init tnetd7200_init_clocks(void)
+{
+	u32 *bootcr = (u32 *)ioremap_nocache(AR7_REGS_DCL, 4);
+	struct tnetd7200_clocks *clocks =
+					ioremap_nocache(AR7_REGS_CLOCKS,
+					sizeof(struct tnetd7200_clocks));
+	int cpu_base, cpu_mul, cpu_prediv, cpu_postdiv;
+	int dsp_base, dsp_mul, dsp_prediv, dsp_postdiv;
+	int usb_base, usb_mul, usb_prediv, usb_postdiv;
+
+	cpu_base = tnetd7200_get_clock_base(TNETD7200_CLOCK_ID_CPU, bootcr);
+	dsp_base = tnetd7200_get_clock_base(TNETD7200_CLOCK_ID_DSP, bootcr);
+
+	if (*bootcr & BOOT_PLL_ASYNC_MODE) {
+		printk(KERN_INFO "Clocks: Async mode\n");
+
+		printk(KERN_INFO "Clocks: Setting DSP clock\n");
+		calculate(dsp_base, TNETD7200_DEF_DSP_CLK,
+			&dsp_prediv, &dsp_postdiv, &dsp_mul);
+		ar7_bus_clock =
+			((dsp_base / dsp_prediv) * dsp_mul) / dsp_postdiv;
+		tnetd7200_set_clock(dsp_base, &clocks->dsp,
+			dsp_prediv, dsp_postdiv * 2, dsp_postdiv, dsp_mul * 2,
+			ar7_bus_clock);
+
+		printk(KERN_INFO "Clocks: Setting CPU clock\n");
+		calculate(cpu_base, TNETD7200_DEF_CPU_CLK, &cpu_prediv,
+			&cpu_postdiv, &cpu_mul);
+		ar7_cpu_clock =
+			((cpu_base / cpu_prediv) * cpu_mul) / cpu_postdiv;
+		tnetd7200_set_clock(cpu_base, &clocks->cpu,
+			cpu_prediv, cpu_postdiv, -1, cpu_mul,
+			ar7_cpu_clock);
+
+	} else
+		if (*bootcr & BOOT_PLL_2TO1_MODE) {
+			printk(KERN_INFO "Clocks: Sync 2:1 mode\n");
+
+			printk(KERN_INFO "Clocks: Setting CPU clock\n");
+			calculate(cpu_base, TNETD7200_DEF_CPU_CLK, &cpu_prediv,
+				&cpu_postdiv, &cpu_mul);
+			ar7_cpu_clock = ((cpu_base / cpu_prediv) * cpu_mul)
+								/ cpu_postdiv;
+			tnetd7200_set_clock(cpu_base, &clocks->cpu,
+				cpu_prediv, cpu_postdiv, -1, cpu_mul,
+				ar7_cpu_clock);
+
+			printk(KERN_INFO "Clocks: Setting DSP clock\n");
+			calculate(dsp_base, TNETD7200_DEF_DSP_CLK, &dsp_prediv,
+				&dsp_postdiv, &dsp_mul);
+			ar7_bus_clock = ar7_cpu_clock / 2;
+			tnetd7200_set_clock(dsp_base, &clocks->dsp,
+				dsp_prediv, dsp_postdiv * 2, dsp_postdiv,
+				dsp_mul * 2, ar7_bus_clock);
+		} else {
+			printk(KERN_INFO "Clocks: Sync 1:1 mode\n");
+
+			printk(KERN_INFO "Clocks: Setting DSP clock\n");
+			calculate(dsp_base, TNETD7200_DEF_DSP_CLK, &dsp_prediv,
+				&dsp_postdiv, &dsp_mul);
+			ar7_bus_clock = ((dsp_base / dsp_prediv) * dsp_mul)
+								/ dsp_postdiv;
+			tnetd7200_set_clock(dsp_base, &clocks->dsp,
+				dsp_prediv, dsp_postdiv * 2, dsp_postdiv,
+				dsp_mul * 2, ar7_bus_clock);
+
+			ar7_cpu_clock = ar7_bus_clock;
+		}
+
+	printk(KERN_INFO "Clocks: Setting USB clock\n");
+	usb_base = ar7_bus_clock;
+	calculate(usb_base, TNETD7200_DEF_USB_CLK, &usb_prediv,
+		&usb_postdiv, &usb_mul);
+	tnetd7200_set_clock(usb_base, &clocks->usb,
+		usb_prediv, usb_postdiv, -1, usb_mul,
+		TNETD7200_DEF_USB_CLK);
+
+	ar7_dsp_clock = ar7_cpu_clock;
+
+	iounmap(clocks);
+	iounmap(bootcr);
+}
+
+int __init ar7_init_clocks(void)
+{
+	switch (ar7_chip_id()) {
+	case AR7_CHIP_7100:
+	case AR7_CHIP_7200:
+		tnetd7200_init_clocks();
+		break;
+	case AR7_CHIP_7300:
+		ar7_dsp_clock = tnetd7300_dsp_clock();
+		tnetd7300_init_clocks();
+		break;
+	default:
+		break;
+	}
+
+	return 0;
+}
+arch_initcall(ar7_init_clocks);
diff --git a/arch/mips/ar7/gpio.c b/arch/mips/ar7/gpio.c
new file mode 100644
index 000000000000..74e14a3dbf4a
--- /dev/null
+++ b/arch/mips/ar7/gpio.c
@@ -0,0 +1,48 @@
+/*
+ * Copyright (C) 2007 Felix Fietkau <nbd@openwrt.org>
+ * Copyright (C) 2007 Eugene Konev <ejka@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/module.h>
+
+#include <asm/mach-ar7/gpio.h>
+
+static const char *ar7_gpio_list[AR7_GPIO_MAX];
+
+int gpio_request(unsigned gpio, const char *label)
+{
+	if (gpio >= AR7_GPIO_MAX)
+		return -EINVAL;
+
+	if (ar7_gpio_list[gpio])
+		return -EBUSY;
+
+	if (label)
+		ar7_gpio_list[gpio] = label;
+	else
+		ar7_gpio_list[gpio] = "busy";
+
+	return 0;
+}
+EXPORT_SYMBOL(gpio_request);
+
+void gpio_free(unsigned gpio)
+{
+	BUG_ON(!ar7_gpio_list[gpio]);
+	ar7_gpio_list[gpio] = NULL;
+}
+EXPORT_SYMBOL(gpio_free);
diff --git a/arch/mips/ar7/irq.c b/arch/mips/ar7/irq.c
new file mode 100644
index 000000000000..c781556c44e4
--- /dev/null
+++ b/arch/mips/ar7/irq.c
@@ -0,0 +1,176 @@
+/*
+ * Copyright (C) 2006,2007 Felix Fietkau <nbd@openwrt.org>
+ * Copyright (C) 2006,2007 Eugene Konev <ejka@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/interrupt.h>
+#include <linux/io.h>
+
+#include <asm/irq_cpu.h>
+#include <asm/mipsregs.h>
+#include <asm/mach-ar7/ar7.h>
+
+#define EXCEPT_OFFSET	0x80
+#define PACE_OFFSET	0xA0
+#define CHNLS_OFFSET	0x200
+
+#define REG_OFFSET(irq, reg)	((irq) / 32 * 0x4 + reg * 0x10)
+#define SEC_REG_OFFSET(reg)	(EXCEPT_OFFSET + reg * 0x8)
+#define SEC_SR_OFFSET		(SEC_REG_OFFSET(0))	/* 0x80 */
+#define CR_OFFSET(irq)		(REG_OFFSET(irq, 1))	/* 0x10 */
+#define SEC_CR_OFFSET		(SEC_REG_OFFSET(1))	/* 0x88 */
+#define ESR_OFFSET(irq)		(REG_OFFSET(irq, 2))	/* 0x20 */
+#define SEC_ESR_OFFSET		(SEC_REG_OFFSET(2))	/* 0x90 */
+#define ECR_OFFSET(irq)		(REG_OFFSET(irq, 3))	/* 0x30 */
+#define SEC_ECR_OFFSET		(SEC_REG_OFFSET(3))	/* 0x98 */
+#define PIR_OFFSET		(0x40)
+#define MSR_OFFSET		(0x44)
+#define PM_OFFSET(irq)		(REG_OFFSET(irq, 5))	/* 0x50 */
+#define TM_OFFSET(irq)		(REG_OFFSET(irq, 6))	/* 0x60 */
+
+#define REG(addr) ((u32 *)(KSEG1ADDR(AR7_REGS_IRQ) + addr))
+
+#define CHNL_OFFSET(chnl) (CHNLS_OFFSET + (chnl * 4))
+
+static int ar7_irq_base;
+
+static void ar7_unmask_irq(unsigned int irq)
+{
+	writel(1 << ((irq - ar7_irq_base) % 32),
+	       REG(ESR_OFFSET(irq - ar7_irq_base)));
+}
+
+static void ar7_mask_irq(unsigned int irq)
+{
+	writel(1 << ((irq - ar7_irq_base) % 32),
+	       REG(ECR_OFFSET(irq - ar7_irq_base)));
+}
+
+static void ar7_ack_irq(unsigned int irq)
+{
+	writel(1 << ((irq - ar7_irq_base) % 32),
+	       REG(CR_OFFSET(irq - ar7_irq_base)));
+}
+
+static void ar7_unmask_sec_irq(unsigned int irq)
+{
+	writel(1 << (irq - ar7_irq_base - 40), REG(SEC_ESR_OFFSET));
+}
+
+static void ar7_mask_sec_irq(unsigned int irq)
+{
+	writel(1 << (irq - ar7_irq_base - 40), REG(SEC_ECR_OFFSET));
+}
+
+static void ar7_ack_sec_irq(unsigned int irq)
+{
+	writel(1 << (irq - ar7_irq_base - 40), REG(SEC_CR_OFFSET));
+}
+
+static struct irq_chip ar7_irq_type = {
+	.name = "AR7",
+	.unmask = ar7_unmask_irq,
+	.mask = ar7_mask_irq,
+	.ack = ar7_ack_irq
+};
+
+static struct irq_chip ar7_sec_irq_type = {
+	.name = "AR7",
+	.unmask = ar7_unmask_sec_irq,
+	.mask = ar7_mask_sec_irq,
+	.ack = ar7_ack_sec_irq,
+};
+
+static struct irqaction ar7_cascade_action = {
+	.handler = no_action,
+	.name = "AR7 cascade interrupt"
+};
+
+static void __init ar7_irq_init(int base)
+{
+	int i;
+	/*
+	 * Disable interrupts and clear pending
+	 */
+	writel(0xffffffff, REG(ECR_OFFSET(0)));
+	writel(0xff, REG(ECR_OFFSET(32)));
+	writel(0xffffffff, REG(SEC_ECR_OFFSET));
+	writel(0xffffffff, REG(CR_OFFSET(0)));
+	writel(0xff, REG(CR_OFFSET(32)));
+	writel(0xffffffff, REG(SEC_CR_OFFSET));
+
+	ar7_irq_base = base;
+
+	for (i = 0; i < 40; i++) {
+		writel(i, REG(CHNL_OFFSET(i)));
+		/* Primary IRQ's */
+		set_irq_chip_and_handler(base + i, &ar7_irq_type,
+					 handle_level_irq);
+		/* Secondary IRQ's */
+		if (i < 32)
+			set_irq_chip_and_handler(base + i + 40,
+						 &ar7_sec_irq_type,
+						 handle_level_irq);
+	}
+
+	setup_irq(2, &ar7_cascade_action);
+	setup_irq(ar7_irq_base, &ar7_cascade_action);
+	set_c0_status(IE_IRQ0);
+}
+
+void __init arch_init_irq(void)
+{
+	mips_cpu_irq_init();
+	ar7_irq_init(8);
+}
+
+static void ar7_cascade(void)
+{
+	u32 status;
+	int i, irq;
+
+	/* Primary IRQ's */
+	irq = readl(REG(PIR_OFFSET)) & 0x3f;
+	if (irq) {
+		do_IRQ(ar7_irq_base + irq);
+		return;
+	}
+
+	/* Secondary IRQ's are cascaded through primary '0' */
+	writel(1, REG(CR_OFFSET(irq)));
+	status = readl(REG(SEC_SR_OFFSET));
+	for (i = 0; i < 32; i++) {
+		if (status & 1) {
+			do_IRQ(ar7_irq_base + i + 40);
+			return;
+		}
+		status >>= 1;
+	}
+
+	spurious_interrupt();
+}
+
+asmlinkage void plat_irq_dispatch(void)
+{
+	unsigned int pending = read_c0_status() & read_c0_cause() & ST0_IM;
+	if (pending & STATUSF_IP7)		/* cpu timer */
+		do_IRQ(7);
+	else if (pending & STATUSF_IP2)		/* int0 hardware line */
+		ar7_cascade();
+	else
+		spurious_interrupt();
+}
diff --git a/arch/mips/ar7/memory.c b/arch/mips/ar7/memory.c
new file mode 100644
index 000000000000..46fed44825a6
--- /dev/null
+++ b/arch/mips/ar7/memory.c
@@ -0,0 +1,72 @@
+/*
+ * Copyright (C) 2007 Felix Fietkau <nbd@openwrt.org>
+ * Copyright (C) 2007 Eugene Konev <ejka@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+#include <linux/bootmem.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/pfn.h>
+#include <linux/proc_fs.h>
+#include <linux/string.h>
+#include <linux/swap.h>
+
+#include <asm/bootinfo.h>
+#include <asm/page.h>
+#include <asm/sections.h>
+
+#include <asm/mach-ar7/ar7.h>
+#include <asm/mips-boards/prom.h>
+
+static int __init memsize(void)
+{
+	u32 size = (64 << 20);
+	u32 *addr = (u32 *)KSEG1ADDR(AR7_SDRAM_BASE + size - 4);
+	u32 *kernel_end = (u32 *)KSEG1ADDR(CPHYSADDR((u32)&_end));
+	u32 *tmpaddr = addr;
+
+	while (tmpaddr > kernel_end) {
+		*tmpaddr = (u32)tmpaddr;
+		size >>= 1;
+		tmpaddr -= size >> 2;
+	}
+
+	do {
+		tmpaddr += size >> 2;
+		if (*tmpaddr != (u32)tmpaddr)
+			break;
+		size <<= 1;
+	} while (size < (64 << 20));
+
+	writel(tmpaddr, &addr);
+
+	return size;
+}
+
+void __init prom_meminit(void)
+{
+	unsigned long pages;
+
+	pages = memsize() >> PAGE_SHIFT;
+	add_memory_region(PHYS_OFFSET, pages << PAGE_SHIFT,
+			  BOOT_MEM_RAM);
+}
+
+void __init prom_free_prom_memory(void)
+{
+	/* Nothing to free */
+}
diff --git a/arch/mips/ar7/platform.c b/arch/mips/ar7/platform.c
new file mode 100644
index 000000000000..542244961780
--- /dev/null
+++ b/arch/mips/ar7/platform.c
@@ -0,0 +1,555 @@
+/*
+ * Copyright (C) 2006,2007 Felix Fietkau <nbd@openwrt.org>
+ * Copyright (C) 2006,2007 Eugene Konev <ejka@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/serial.h>
+#include <linux/serial_8250.h>
+#include <linux/ioport.h>
+#include <linux/io.h>
+#include <linux/version.h>
+#include <linux/vlynq.h>
+#include <linux/leds.h>
+#include <linux/string.h>
+#include <linux/etherdevice.h>
+
+#include <asm/addrspace.h>
+#include <asm/mach-ar7/ar7.h>
+#include <asm/mach-ar7/gpio.h>
+#include <asm/mach-ar7/prom.h>
+
+struct plat_vlynq_data {
+	struct plat_vlynq_ops ops;
+	int gpio_bit;
+	int reset_bit;
+};
+
+
+static int vlynq_on(struct vlynq_device *dev)
+{
+	int result;
+	struct plat_vlynq_data *pdata = dev->dev.platform_data;
+
+	result = gpio_request(pdata->gpio_bit, "vlynq");
+	if (result)
+		goto out;
+
+	ar7_device_reset(pdata->reset_bit);
+
+	result = ar7_gpio_disable(pdata->gpio_bit);
+	if (result)
+		goto out_enabled;
+
+	result = ar7_gpio_enable(pdata->gpio_bit);
+	if (result)
+		goto out_enabled;
+
+	result = gpio_direction_output(pdata->gpio_bit, 0);
+	if (result)
+		goto out_gpio_enabled;
+
+	msleep(50);
+
+	gpio_set_value(pdata->gpio_bit, 1);
+	msleep(50);
+
+	return 0;
+
+out_gpio_enabled:
+	ar7_gpio_disable(pdata->gpio_bit);
+out_enabled:
+	ar7_device_disable(pdata->reset_bit);
+	gpio_free(pdata->gpio_bit);
+out:
+	return result;
+}
+
+static void vlynq_off(struct vlynq_device *dev)
+{
+	struct plat_vlynq_data *pdata = dev->dev.platform_data;
+	ar7_gpio_disable(pdata->gpio_bit);
+	gpio_free(pdata->gpio_bit);
+	ar7_device_disable(pdata->reset_bit);
+}
+
+static struct resource physmap_flash_resource = {
+	.name = "mem",
+	.flags = IORESOURCE_MEM,
+	.start = 0x10000000,
+	.end = 0x107fffff,
+};
+
+static struct resource cpmac_low_res[] = {
+	{
+		.name = "regs",
+		.flags = IORESOURCE_MEM,
+		.start = AR7_REGS_MAC0,
+		.end = AR7_REGS_MAC0 + 0x7ff,
+	},
+	{
+		.name = "irq",
+		.flags = IORESOURCE_IRQ,
+		.start = 27,
+		.end = 27,
+	},
+};
+
+static struct resource cpmac_high_res[] = {
+	{
+		.name = "regs",
+		.flags = IORESOURCE_MEM,
+		.start = AR7_REGS_MAC1,
+		.end = AR7_REGS_MAC1 + 0x7ff,
+	},
+	{
+		.name = "irq",
+		.flags = IORESOURCE_IRQ,
+		.start = 41,
+		.end = 41,
+	},
+};
+
+static struct resource vlynq_low_res[] = {
+	{
+		.name = "regs",
+		.flags = IORESOURCE_MEM,
+		.start = AR7_REGS_VLYNQ0,
+		.end = AR7_REGS_VLYNQ0 + 0xff,
+	},
+	{
+		.name = "irq",
+		.flags = IORESOURCE_IRQ,
+		.start = 29,
+		.end = 29,
+	},
+	{
+		.name = "mem",
+		.flags = IORESOURCE_MEM,
+		.start = 0x04000000,
+		.end = 0x04ffffff,
+	},
+	{
+		.name = "devirq",
+		.flags = IORESOURCE_IRQ,
+		.start = 80,
+		.end = 111,
+	},
+};
+
+static struct resource vlynq_high_res[] = {
+	{
+		.name = "regs",
+		.flags = IORESOURCE_MEM,
+		.start = AR7_REGS_VLYNQ1,
+		.end = AR7_REGS_VLYNQ1 + 0xff,
+	},
+	{
+		.name = "irq",
+		.flags = IORESOURCE_IRQ,
+		.start = 33,
+		.end = 33,
+	},
+	{
+		.name = "mem",
+		.flags = IORESOURCE_MEM,
+		.start = 0x0c000000,
+		.end = 0x0cffffff,
+	},
+	{
+		.name = "devirq",
+		.flags = IORESOURCE_IRQ,
+		.start = 112,
+		.end = 143,
+	},
+};
+
+static struct resource usb_res[] = {
+	{
+		.name = "regs",
+		.flags = IORESOURCE_MEM,
+		.start = AR7_REGS_USB,
+		.end = AR7_REGS_USB + 0xff,
+	},
+	{
+		.name = "irq",
+		.flags = IORESOURCE_IRQ,
+		.start = 32,
+		.end = 32,
+	},
+	{
+		.name = "mem",
+		.flags = IORESOURCE_MEM,
+		.start = 0x03400000,
+		.end = 0x034001fff,
+	},
+};
+
+static struct physmap_flash_data physmap_flash_data = {
+	.width = 2,
+};
+
+static struct plat_cpmac_data cpmac_low_data = {
+	.reset_bit = 17,
+	.power_bit = 20,
+	.phy_mask = 0x80000000,
+};
+
+static struct plat_cpmac_data cpmac_high_data = {
+	.reset_bit = 21,
+	.power_bit = 22,
+	.phy_mask = 0x7fffffff,
+};
+
+static struct plat_vlynq_data vlynq_low_data = {
+	.ops.on = vlynq_on,
+	.ops.off = vlynq_off,
+	.reset_bit = 20,
+	.gpio_bit = 18,
+};
+
+static struct plat_vlynq_data vlynq_high_data = {
+	.ops.on = vlynq_on,
+	.ops.off = vlynq_off,
+	.reset_bit = 16,
+	.gpio_bit = 19,
+};
+
+static struct platform_device physmap_flash = {
+	.id = 0,
+	.name = "physmap-flash",
+	.dev.platform_data = &physmap_flash_data,
+	.resource = &physmap_flash_resource,
+	.num_resources = 1,
+};
+
+static u64 cpmac_dma_mask = DMA_32BIT_MASK;
+static struct platform_device cpmac_low = {
+	.id = 0,
+	.name = "cpmac",
+	.dev = {
+		.dma_mask = &cpmac_dma_mask,
+		.coherent_dma_mask = DMA_32BIT_MASK,
+		.platform_data = &cpmac_low_data,
+	},
+	.resource = cpmac_low_res,
+	.num_resources = ARRAY_SIZE(cpmac_low_res),
+};
+
+static struct platform_device cpmac_high = {
+	.id = 1,
+	.name = "cpmac",
+	.dev = {
+		.dma_mask = &cpmac_dma_mask,
+		.coherent_dma_mask = DMA_32BIT_MASK,
+		.platform_data = &cpmac_high_data,
+	},
+	.resource = cpmac_high_res,
+	.num_resources = ARRAY_SIZE(cpmac_high_res),
+};
+
+static struct platform_device vlynq_low = {
+	.id = 0,
+	.name = "vlynq",
+	.dev.platform_data = &vlynq_low_data,
+	.resource = vlynq_low_res,
+	.num_resources = ARRAY_SIZE(vlynq_low_res),
+};
+
+static struct platform_device vlynq_high = {
+	.id = 1,
+	.name = "vlynq",
+	.dev.platform_data = &vlynq_high_data,
+	.resource = vlynq_high_res,
+	.num_resources = ARRAY_SIZE(vlynq_high_res),
+};
+
+
+static struct gpio_led default_leds[] = {
+	{
+		.name = "status",
+		.gpio = 8,
+		.active_low = 1,
+	},
+};
+
+static struct gpio_led dsl502t_leds[] = {
+	{
+		.name = "status",
+		.gpio = 9,
+		.active_low = 1,
+	},
+	{
+		.name = "ethernet",
+		.gpio = 7,
+		.active_low = 1,
+	},
+	{
+		.name = "usb",
+		.gpio = 12,
+		.active_low = 1,
+	},
+};
+
+static struct gpio_led dg834g_leds[] = {
+	{
+		.name = "ppp",
+		.gpio = 6,
+		.active_low = 1,
+	},
+	{
+		.name = "status",
+		.gpio = 7,
+		.active_low = 1,
+	},
+	{
+		.name = "adsl",
+		.gpio = 8,
+		.active_low = 1,
+	},
+	{
+		.name = "wifi",
+		.gpio = 12,
+		.active_low = 1,
+	},
+	{
+		.name = "power",
+		.gpio = 14,
+		.active_low = 1,
+		.default_trigger = "default-on",
+	},
+};
+
+static struct gpio_led fb_sl_leds[] = {
+	{
+		.name = "1",
+		.gpio = 7,
+	},
+	{
+		.name = "2",
+		.gpio = 13,
+		.active_low = 1,
+	},
+	{
+		.name = "3",
+		.gpio = 10,
+		.active_low = 1,
+	},
+	{
+		.name = "4",
+		.gpio = 12,
+		.active_low = 1,
+	},
+	{
+		.name = "5",
+		.gpio = 9,
+		.active_low = 1,
+	},
+};
+
+static struct gpio_led fb_fon_leds[] = {
+	{
+		.name = "1",
+		.gpio = 8,
+	},
+	{
+		.name = "2",
+		.gpio = 3,
+		.active_low = 1,
+	},
+	{
+		.name = "3",
+		.gpio = 5,
+	},
+	{
+		.name = "4",
+		.gpio = 4,
+		.active_low = 1,
+	},
+	{
+		.name = "5",
+		.gpio = 11,
+		.active_low = 1,
+	},
+};
+
+static struct gpio_led_platform_data ar7_led_data;
+
+static struct platform_device ar7_gpio_leds = {
+	.name = "leds-gpio",
+	.id = -1,
+	.dev = {
+		.platform_data = &ar7_led_data,
+	}
+};
+
+static struct platform_device ar7_udc = {
+	.id = -1,
+	.name = "ar7_udc",
+	.resource = usb_res,
+	.num_resources = ARRAY_SIZE(usb_res),
+};
+
+static inline unsigned char char2hex(char h)
+{
+	switch (h) {
+	case '0': case '1': case '2': case '3': case '4':
+	case '5': case '6': case '7': case '8': case '9':
+		return h - '0';
+	case 'A': case 'B': case 'C': case 'D': case 'E': case 'F':
+		return h - 'A' + 10;
+	case 'a': case 'b': case 'c': case 'd': case 'e': case 'f':
+		return h - 'a' + 10;
+	default:
+		return 0;
+	}
+}
+
+static void cpmac_get_mac(int instance, unsigned char *dev_addr)
+{
+	int i;
+	char name[5], default_mac[ETH_ALEN], *mac;
+
+	mac = NULL;
+	sprintf(name, "mac%c", 'a' + instance);
+	mac = prom_getenv(name);
+	if (!mac) {
+		sprintf(name, "mac%c", 'a');
+		mac = prom_getenv(name);
+	}
+	if (!mac) {
+		random_ether_addr(default_mac);
+		mac = default_mac;
+	}
+	for (i = 0; i < 6; i++)
+		dev_addr[i] = (char2hex(mac[i * 3]) << 4) +
+			char2hex(mac[i * 3 + 1]);
+}
+
+static void __init detect_leds(void)
+{
+	char *prid, *usb_prod;
+
+	/* Default LEDs	*/
+	ar7_led_data.num_leds = ARRAY_SIZE(default_leds);
+	ar7_led_data.leds = default_leds;
+
+	/* FIXME: the whole thing is unreliable */
+	prid = prom_getenv("ProductID");
+	usb_prod = prom_getenv("usb_prod");
+
+	/* If we can't get the product id from PROM, use the default LEDs */
+	if (!prid)
+		return;
+
+	if (strstr(prid, "Fritz_Box_FON")) {
+		ar7_led_data.num_leds = ARRAY_SIZE(fb_fon_leds);
+		ar7_led_data.leds = fb_fon_leds;
+	} else if (strstr(prid, "Fritz_Box_")) {
+		ar7_led_data.num_leds = ARRAY_SIZE(fb_sl_leds);
+		ar7_led_data.leds = fb_sl_leds;
+	} else if ((!strcmp(prid, "AR7RD") || !strcmp(prid, "AR7DB"))
+		&& usb_prod != NULL && strstr(usb_prod, "DSL-502T")) {
+		ar7_led_data.num_leds = ARRAY_SIZE(dsl502t_leds);
+		ar7_led_data.leds = dsl502t_leds;
+	} else if (strstr(prid, "DG834")) {
+		ar7_led_data.num_leds = ARRAY_SIZE(dg834g_leds);
+		ar7_led_data.leds = dg834g_leds;
+	}
+}
+
+static int __init ar7_register_devices(void)
+{
+	int res;
+	static struct uart_port uart_port[2];
+
+	memset(uart_port, 0, sizeof(struct uart_port) * 2);
+
+	uart_port[0].type = PORT_16550A;
+	uart_port[0].line = 0;
+	uart_port[0].irq = AR7_IRQ_UART0;
+	uart_port[0].uartclk = ar7_bus_freq() / 2;
+	uart_port[0].iotype = UPIO_MEM32;
+	uart_port[0].mapbase = AR7_REGS_UART0;
+	uart_port[0].membase = ioremap(uart_port[0].mapbase, 256);
+	uart_port[0].regshift = 2;
+	res = early_serial_setup(&uart_port[0]);
+	if (res)
+		return res;
+
+
+	/* Only TNETD73xx have a second serial port */
+	if (ar7_has_second_uart()) {
+		uart_port[1].type = PORT_16550A;
+		uart_port[1].line = 1;
+		uart_port[1].irq = AR7_IRQ_UART1;
+		uart_port[1].uartclk = ar7_bus_freq() / 2;
+		uart_port[1].iotype = UPIO_MEM32;
+		uart_port[1].mapbase = UR8_REGS_UART1;
+		uart_port[1].membase = ioremap(uart_port[1].mapbase, 256);
+		uart_port[1].regshift = 2;
+		res = early_serial_setup(&uart_port[1]);
+		if (res)
+			return res;
+	}
+
+	res = platform_device_register(&physmap_flash);
+	if (res)
+		return res;
+
+	ar7_device_disable(vlynq_low_data.reset_bit);
+	res = platform_device_register(&vlynq_low);
+	if (res)
+		return res;
+
+	if (ar7_has_high_vlynq()) {
+		ar7_device_disable(vlynq_high_data.reset_bit);
+		res = platform_device_register(&vlynq_high);
+		if (res)
+			return res;
+	}
+
+	if (ar7_has_high_cpmac()) {
+		cpmac_get_mac(1, cpmac_high_data.dev_addr);
+		res = platform_device_register(&cpmac_high);
+		if (res)
+			return res;
+	} else {
+		cpmac_low_data.phy_mask = 0xffffffff;
+	}
+
+	cpmac_get_mac(0, cpmac_low_data.dev_addr);
+	res = platform_device_register(&cpmac_low);
+	if (res)
+		return res;
+
+	detect_leds();
+	res = platform_device_register(&ar7_gpio_leds);
+	if (res)
+		return res;
+
+	res = platform_device_register(&ar7_udc);
+
+	return res;
+}
+arch_initcall(ar7_register_devices);
diff --git a/arch/mips/ar7/prom.c b/arch/mips/ar7/prom.c
new file mode 100644
index 000000000000..a320bceb2f9d
--- /dev/null
+++ b/arch/mips/ar7/prom.c
@@ -0,0 +1,297 @@
+/*
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 1999,2000 MIPS Technologies, Inc.  All rights reserved.
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * Putting things on the screen/serial line using YAMONs facilities.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/serial_reg.h>
+#include <linux/spinlock.h>
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/io.h>
+#include <asm/bootinfo.h>
+
+#include <asm/mach-ar7/ar7.h>
+#include <asm/mach-ar7/prom.h>
+
+#define MAX_ENTRY 80
+
+struct env_var {
+	char *name;
+	char *value;
+};
+
+static struct env_var adam2_env[MAX_ENTRY];
+
+char *prom_getenv(const char *name)
+{
+	int i;
+	for (i = 0; (i < MAX_ENTRY) && adam2_env[i].name; i++)
+		if (!strcmp(name, adam2_env[i].name))
+			return adam2_env[i].value;
+
+	return NULL;
+}
+EXPORT_SYMBOL(prom_getenv);
+
+char * __init prom_getcmdline(void)
+{
+	return &(arcs_cmdline[0]);
+}
+
+static void  __init ar7_init_cmdline(int argc, char *argv[])
+{
+	char *cp;
+	int actr;
+
+	actr = 1; /* Always ignore argv[0] */
+
+	cp = &(arcs_cmdline[0]);
+	while (actr < argc) {
+		strcpy(cp, argv[actr]);
+		cp += strlen(argv[actr]);
+		*cp++ = ' ';
+		actr++;
+	}
+	if (cp != &(arcs_cmdline[0])) {
+		/* get rid of trailing space */
+		--cp;
+		*cp = '\0';
+	}
+}
+
+struct psbl_rec {
+	u32 psbl_size;
+	u32 env_base;
+	u32 env_size;
+	u32 ffs_base;
+	u32 ffs_size;
+};
+
+static __initdata char psp_env_version[] = "TIENV0.8";
+
+struct psp_env_chunk {
+	u8 num;
+	u8 ctrl;
+	u16 csum;
+	u8 len;
+	char data[11];
+} __attribute__ ((packed));
+
+struct psp_var_map_entry {
+	u8 num;
+	char *value;
+};
+
+static struct psp_var_map_entry psp_var_map[] = {
+	{ 1, "cpufrequency" },
+	{ 2, "memsize" },
+	{ 3, "flashsize" },
+	{ 4, "modetty0" },
+	{ 5, "modetty1" },
+	{ 8, "maca" },
+	{ 9, "macb" },
+	{ 28, "sysfrequency" },
+	{ 38, "mipsfrequency" },
+};
+
+/*
+
+Well-known variable (num is looked up in table above for matching variable name)
+Example: cpufrequency=211968000
++----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+---
+| 01 |CTRL|CHECKSUM | 01 | _2 | _1 | _1 | _9 | _6 | _8 | _0 | _0 | _0 | \0 | FF
++----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+---
+
+Name=Value pair in a single chunk
+Example: NAME=VALUE
++----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+---
+| 00 |CTRL|CHECKSUM | 01 | _N | _A | _M | _E | _0 | _V | _A | _L | _U | _E | \0
++----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+---
+
+Name=Value pair in 2 chunks (len is the number of chunks)
+Example: bootloaderVersion=1.3.7.15
++----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+---
+| 00 |CTRL|CHECKSUM | 02 | _b | _o | _o | _t | _l | _o | _a | _d | _e | _r | _V
++----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+---
+| _e | _r | _s | _i | _o | _n | \0 | _1 | _. | _3 | _. | _7 | _. | _1 | _5 | \0
++----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+---
+
+Data is padded with 0xFF
+
+*/
+
+#define PSP_ENV_SIZE  4096
+
+static char psp_env_data[PSP_ENV_SIZE] = { 0, };
+
+static char * __init lookup_psp_var_map(u8 num)
+{
+	int i;
+
+	for (i = 0; i < sizeof(psp_var_map); i++)
+		if (psp_var_map[i].num == num)
+			return psp_var_map[i].value;
+
+	return NULL;
+}
+
+static void __init add_adam2_var(char *name, char *value)
+{
+	int i;
+	for (i = 0; i < MAX_ENTRY; i++) {
+		if (!adam2_env[i].name) {
+			adam2_env[i].name = name;
+			adam2_env[i].value = value;
+			return;
+		} else if (!strcmp(adam2_env[i].name, name)) {
+			adam2_env[i].value = value;
+			return;
+		}
+	}
+}
+
+static int __init parse_psp_env(void *psp_env_base)
+{
+	int i, n;
+	char *name, *value;
+	struct psp_env_chunk *chunks = (struct psp_env_chunk *)psp_env_data;
+
+	memcpy_fromio(chunks, psp_env_base, PSP_ENV_SIZE);
+
+	i = 1;
+	n = PSP_ENV_SIZE / sizeof(struct psp_env_chunk);
+	while (i < n) {
+		if ((chunks[i].num == 0xff) || ((i + chunks[i].len) > n))
+			break;
+		value = chunks[i].data;
+		if (chunks[i].num) {
+			name = lookup_psp_var_map(chunks[i].num);
+		} else {
+			name = value;
+			value += strlen(name) + 1;
+		}
+		if (name)
+			add_adam2_var(name, value);
+		i += chunks[i].len;
+	}
+	return 0;
+}
+
+static void __init ar7_init_env(struct env_var *env)
+{
+	int i;
+	struct psbl_rec *psbl = (struct psbl_rec *)(KSEG1ADDR(0x14000300));
+	void *psp_env = (void *)KSEG1ADDR(psbl->env_base);
+
+	if (strcmp(psp_env, psp_env_version) == 0) {
+		parse_psp_env(psp_env);
+	} else {
+		for (i = 0; i < MAX_ENTRY; i++, env++)
+			if (env->name)
+				add_adam2_var(env->name, env->value);
+	}
+}
+
+static void __init console_config(void)
+{
+#ifdef CONFIG_SERIAL_8250_CONSOLE
+	char console_string[40];
+	int baud = 0;
+	char parity = '\0', bits = '\0', flow = '\0';
+	char *s, *p;
+
+	if (strstr(prom_getcmdline(), "console="))
+		return;
+
+#ifdef CONFIG_KGDB
+	if (!strstr(prom_getcmdline(), "nokgdb")) {
+		strcat(prom_getcmdline(), " console=kgdb");
+		kgdb_enabled = 1;
+		return;
+	}
+#endif
+
+	s = prom_getenv("modetty0");
+	if (s) {
+		baud = simple_strtoul(s, &p, 10);
+		s = p;
+		if (*s == ',')
+			s++;
+		if (*s)
+			parity = *s++;
+		if (*s == ',')
+			s++;
+		if (*s)
+			bits = *s++;
+		if (*s == ',')
+			s++;
+		if (*s == 'h')
+			flow = 'r';
+	}
+
+	if (baud == 0)
+		baud = 38400;
+	if (parity != 'n' && parity != 'o' && parity != 'e')
+		parity = 'n';
+	if (bits != '7' && bits != '8')
+		bits = '8';
+
+	if (flow == 'r')
+		sprintf(console_string, " console=ttyS0,%d%c%c%c", baud,
+			parity, bits, flow);
+	else
+		sprintf(console_string, " console=ttyS0,%d%c%c", baud, parity,
+			bits);
+	strcat(prom_getcmdline(), console_string);
+#endif
+}
+
+void __init prom_init(void)
+{
+	ar7_init_cmdline(fw_arg0, (char **)fw_arg1);
+	ar7_init_env((struct env_var *)fw_arg2);
+	console_config();
+}
+
+#define PORT(offset) (KSEG1ADDR(AR7_REGS_UART0 + (offset * 4)))
+static inline unsigned int serial_in(int offset)
+{
+	return readl((void *)PORT(offset));
+}
+
+static inline void serial_out(int offset, int value)
+{
+	writel(value, (void *)PORT(offset));
+}
+
+char prom_getchar(void)
+{
+	while (!(serial_in(UART_LSR) & UART_LSR_DR))
+		;
+	return serial_in(UART_RX);
+}
+
+int prom_putchar(char c)
+{
+	while ((serial_in(UART_LSR) & UART_LSR_TEMT) == 0)
+		;
+	serial_out(UART_TX, c);
+	return 1;
+}
+
diff --git a/arch/mips/ar7/setup.c b/arch/mips/ar7/setup.c
new file mode 100644
index 000000000000..6ebb5f16d967
--- /dev/null
+++ b/arch/mips/ar7/setup.c
@@ -0,0 +1,94 @@
+/*
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 2000 MIPS Technologies, Inc.  All rights reserved.
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ */
+#include <linux/version.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/pm.h>
+#include <linux/time.h>
+
+#include <asm/reboot.h>
+#include <asm/mach-ar7/ar7.h>
+#include <asm/mach-ar7/prom.h>
+
+static void ar7_machine_restart(char *command)
+{
+	u32 *softres_reg = ioremap(AR7_REGS_RESET +
+					  AR7_RESET_SOFTWARE, 1);
+	writel(1, softres_reg);
+}
+
+static void ar7_machine_halt(void)
+{
+	while (1)
+		;
+}
+
+static void ar7_machine_power_off(void)
+{
+	u32 *power_reg = (u32 *)ioremap(AR7_REGS_POWER, 1);
+	u32 power_state = readl(power_reg) | (3 << 30);
+	writel(power_state, power_reg);
+	ar7_machine_halt();
+}
+
+const char *get_system_type(void)
+{
+	u16 chip_id = ar7_chip_id();
+	switch (chip_id) {
+	case AR7_CHIP_7300:
+		return "TI AR7 (TNETD7300)";
+	case AR7_CHIP_7100:
+		return "TI AR7 (TNETD7100)";
+	case AR7_CHIP_7200:
+		return "TI AR7 (TNETD7200)";
+	default:
+		return "TI AR7 (Unknown)";
+	}
+}
+
+static int __init ar7_init_console(void)
+{
+	return 0;
+}
+console_initcall(ar7_init_console);
+
+/*
+ * Initializes basic routines and structures pointers, memory size (as
+ * given by the bios and saves the command line.
+ */
+
+void __init plat_mem_setup(void)
+{
+	unsigned long io_base;
+
+	_machine_restart = ar7_machine_restart;
+	_machine_halt = ar7_machine_halt;
+	pm_power_off = ar7_machine_power_off;
+	panic_timeout = 3;
+
+	io_base = (unsigned long)ioremap(AR7_REGS_BASE, 0x10000);
+	if (!io_base)
+		panic("Can't remap IO base!\n");
+	set_io_port_base(io_base);
+
+	prom_meminit();
+
+	printk(KERN_INFO "%s, ID: 0x%04x, Revision: 0x%02x\n",
+					get_system_type(),
+		ar7_chip_id(), ar7_chip_rev());
+}
diff --git a/arch/mips/ar7/time.c b/arch/mips/ar7/time.c
new file mode 100644
index 000000000000..a1fba894daa2
--- /dev/null
+++ b/arch/mips/ar7/time.c
@@ -0,0 +1,30 @@
+/*
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 1999,2000 MIPS Technologies, Inc.  All rights reserved.
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * Setting up the clock on the MIPS boards.
+ */
+
+#include <linux/init.h>
+#include <linux/time.h>
+
+#include <asm/time.h>
+#include <asm/mach-ar7/ar7.h>
+
+void __init plat_time_init(void)
+{
+	mips_hpt_frequency = ar7_cpu_freq() / 2;
+}
diff --git a/arch/mips/cavium-octeon/Makefile b/arch/mips/cavium-octeon/Makefile
index 7c0528b0e34c..d6903c3f3d51 100644
--- a/arch/mips/cavium-octeon/Makefile
+++ b/arch/mips/cavium-octeon/Makefile
@@ -14,9 +14,5 @@ obj-y += dma-octeon.o flash_setup.o
 obj-y += octeon-memcpy.o
 
 obj-$(CONFIG_SMP)                     += smp.o
-obj-$(CONFIG_PCI)                     += pci-common.o
-obj-$(CONFIG_PCI)                     += pci.o
-obj-$(CONFIG_PCI)                     += pcie.o
-obj-$(CONFIG_PCI_MSI)                 += msi.o
 
 EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/cavium-octeon/dma-octeon.c b/arch/mips/cavium-octeon/dma-octeon.c
index 627c162a6159..4b92bfc662db 100644
--- a/arch/mips/cavium-octeon/dma-octeon.c
+++ b/arch/mips/cavium-octeon/dma-octeon.c
@@ -29,7 +29,7 @@
 #include <dma-coherence.h>
 
 #ifdef CONFIG_PCI
-#include "pci-common.h"
+#include <asm/octeon/pci-octeon.h>
 #endif
 
 #define BAR2_PCI_ADDRESS 0x8000000000ul
diff --git a/arch/mips/cavium-octeon/pci-common.c b/arch/mips/cavium-octeon/pci-common.c
deleted file mode 100644
index cd029f88da7f..000000000000
--- a/arch/mips/cavium-octeon/pci-common.c
+++ /dev/null
@@ -1,137 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2005-2007 Cavium Networks
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/interrupt.h>
-#include <linux/time.h>
-#include <linux/delay.h>
-#include "pci-common.h"
-
-typeof(pcibios_map_irq) *octeon_pcibios_map_irq;
-enum octeon_dma_bar_type octeon_dma_bar_type = OCTEON_DMA_BAR_TYPE_INVALID;
-
-/**
- * Map a PCI device to the appropriate interrupt line
- *
- * @param dev    The Linux PCI device structure for the device to map
- * @param slot   The slot number for this device on __BUS 0__. Linux
- *               enumerates through all the bridges and figures out the
- *               slot on Bus 0 where this device eventually hooks to.
- * @param pin    The PCI interrupt pin read from the device, then swizzled
- *               as it goes through each bridge.
- * @return Interrupt number for the device
- */
-int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	if (octeon_pcibios_map_irq)
-		return octeon_pcibios_map_irq(dev, slot, pin);
-	else
-		panic("octeon_pcibios_map_irq doesn't point to a "
-		      "pcibios_map_irq() function");
-}
-
-
-/**
- * Called to perform platform specific PCI setup
- *
- * @param dev
- * @return
- */
-int pcibios_plat_dev_init(struct pci_dev *dev)
-{
-	uint16_t config;
-	uint32_t dconfig;
-	int pos;
-	/*
-	 * Force the Cache line setting to 64 bytes. The standard
-	 * Linux bus scan doesn't seem to set it. Octeon really has
-	 * 128 byte lines, but Intel bridges get really upset if you
-	 * try and set values above 64 bytes. Value is specified in
-	 * 32bit words.
-	 */
-	pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 64 / 4);
-	/* Set latency timers for all devices */
-	pci_write_config_byte(dev, PCI_LATENCY_TIMER, 48);
-
-	/* Enable reporting System errors and parity errors on all devices */
-	/* Enable parity checking and error reporting */
-	pci_read_config_word(dev, PCI_COMMAND, &config);
-	config |= PCI_COMMAND_PARITY | PCI_COMMAND_SERR;
-	pci_write_config_word(dev, PCI_COMMAND, config);
-
-	if (dev->subordinate) {
-		/* Set latency timers on sub bridges */
-		pci_write_config_byte(dev, PCI_SEC_LATENCY_TIMER, 48);
-		/* More bridge error detection */
-		pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &config);
-		config |= PCI_BRIDGE_CTL_PARITY | PCI_BRIDGE_CTL_SERR;
-		pci_write_config_word(dev, PCI_BRIDGE_CONTROL, config);
-	}
-
-	/* Enable the PCIe normal error reporting */
-	pos = pci_find_capability(dev, PCI_CAP_ID_EXP);
-	if (pos) {
-		/* Update Device Control */
-		pci_read_config_word(dev, pos + PCI_EXP_DEVCTL, &config);
-		/* Correctable Error Reporting */
-		config |= PCI_EXP_DEVCTL_CERE;
-		/* Non-Fatal Error Reporting */
-		config |= PCI_EXP_DEVCTL_NFERE;
-		/* Fatal Error Reporting */
-		config |= PCI_EXP_DEVCTL_FERE;
-		/* Unsupported Request */
-		config |= PCI_EXP_DEVCTL_URRE;
-		pci_write_config_word(dev, pos + PCI_EXP_DEVCTL, config);
-	}
-
-	/* Find the Advanced Error Reporting capability */
-	pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR);
-	if (pos) {
-		/* Clear Uncorrectable Error Status */
-		pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS,
-				      &dconfig);
-		pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS,
-				       dconfig);
-		/* Enable reporting of all uncorrectable errors */
-		/* Uncorrectable Error Mask - turned on bits disable errors */
-		pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_MASK, 0);
-		/*
-		 * Leave severity at HW default. This only controls if
-		 * errors are reported as uncorrectable or
-		 * correctable, not if the error is reported.
-		 */
-		/* PCI_ERR_UNCOR_SEVER - Uncorrectable Error Severity */
-		/* Clear Correctable Error Status */
-		pci_read_config_dword(dev, pos + PCI_ERR_COR_STATUS, &dconfig);
-		pci_write_config_dword(dev, pos + PCI_ERR_COR_STATUS, dconfig);
-		/* Enable reporting of all correctable errors */
-		/* Correctable Error Mask - turned on bits disable errors */
-		pci_write_config_dword(dev, pos + PCI_ERR_COR_MASK, 0);
-		/* Advanced Error Capabilities */
-		pci_read_config_dword(dev, pos + PCI_ERR_CAP, &dconfig);
-		/* ECRC Generation Enable */
-		if (config & PCI_ERR_CAP_ECRC_GENC)
-			config |= PCI_ERR_CAP_ECRC_GENE;
-		/* ECRC Check Enable */
-		if (config & PCI_ERR_CAP_ECRC_CHKC)
-			config |= PCI_ERR_CAP_ECRC_CHKE;
-		pci_write_config_dword(dev, pos + PCI_ERR_CAP, dconfig);
-		/* PCI_ERR_HEADER_LOG - Header Log Register (16 bytes) */
-		/* Report all errors to the root complex */
-		pci_write_config_dword(dev, pos + PCI_ERR_ROOT_COMMAND,
-				       PCI_ERR_ROOT_CMD_COR_EN |
-				       PCI_ERR_ROOT_CMD_NONFATAL_EN |
-				       PCI_ERR_ROOT_CMD_FATAL_EN);
-		/* Clear the Root status register */
-		pci_read_config_dword(dev, pos + PCI_ERR_ROOT_STATUS, &dconfig);
-		pci_write_config_dword(dev, pos + PCI_ERR_ROOT_STATUS, dconfig);
-	}
-
-	return 0;
-}
diff --git a/arch/mips/cobalt/buttons.c b/arch/mips/cobalt/buttons.c
index 9e143989c7b8..4eaec8b46e0c 100644
--- a/arch/mips/cobalt/buttons.c
+++ b/arch/mips/cobalt/buttons.c
@@ -1,7 +1,7 @@
 /*
  *  Cobalt buttons platform device.
  *
- *  Copyright (C) 2007  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2007  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/cobalt/lcd.c b/arch/mips/cobalt/lcd.c
index 0720e4fae311..0f1cd90f37ed 100644
--- a/arch/mips/cobalt/lcd.c
+++ b/arch/mips/cobalt/lcd.c
@@ -1,7 +1,7 @@
 /*
  *  Registration of Cobalt LCD platform device.
  *
- *  Copyright (C) 2008  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2008  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/cobalt/led.c b/arch/mips/cobalt/led.c
index 1c6ebd468b07..d3ce6fa1dc74 100644
--- a/arch/mips/cobalt/led.c
+++ b/arch/mips/cobalt/led.c
@@ -1,7 +1,7 @@
 /*
  *  Registration of Cobalt LED platform device.
  *
- *  Copyright (C) 2007  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2007  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/cobalt/mtd.c b/arch/mips/cobalt/mtd.c
index 2b088ef3839a..691d620b6766 100644
--- a/arch/mips/cobalt/mtd.c
+++ b/arch/mips/cobalt/mtd.c
@@ -1,7 +1,7 @@
 /*
  *  Registration of Cobalt MTD device.
  *
- *  Copyright (C) 2006  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2006  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/cobalt/rtc.c b/arch/mips/cobalt/rtc.c
index e70794b8bcba..3ab39898b4e4 100644
--- a/arch/mips/cobalt/rtc.c
+++ b/arch/mips/cobalt/rtc.c
@@ -1,7 +1,7 @@
 /*
  *  Registration of Cobalt RTC platform device.
  *
- *  Copyright (C) 2007  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2007  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/cobalt/serial.c b/arch/mips/cobalt/serial.c
index 53b8d0d6da90..7cb51f57275e 100644
--- a/arch/mips/cobalt/serial.c
+++ b/arch/mips/cobalt/serial.c
@@ -1,7 +1,7 @@
 /*
  *  Registration of Cobalt UART platform device.
  *
- *  Copyright (C) 2007  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2007  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/cobalt/time.c b/arch/mips/cobalt/time.c
index 4a570e7145fe..0162f9edc693 100644
--- a/arch/mips/cobalt/time.c
+++ b/arch/mips/cobalt/time.c
@@ -1,7 +1,7 @@
 /*
  *  Cobalt time initialization.
  *
- *  Copyright (C) 2007  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2007  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/configs/ar7_defconfig b/arch/mips/configs/ar7_defconfig
new file mode 100644
index 000000000000..dad5b6769d74
--- /dev/null
+++ b/arch/mips/configs/ar7_defconfig
@@ -0,0 +1,1182 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.30
+# Wed Jun 24 14:08:59 2009
+#
+CONFIG_MIPS=y
+
+#
+# Machine selection
+#
+# CONFIG_MACH_ALCHEMY is not set
+CONFIG_AR7=y
+# CONFIG_BASLER_EXCITE is not set
+# CONFIG_BCM47XX is not set
+# CONFIG_MIPS_COBALT is not set
+# CONFIG_MACH_DECSTATION is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
+# CONFIG_LEMOTE_FULONG is not set
+# CONFIG_MIPS_MALTA is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_NEC_MARKEINS is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_NXP_STB220 is not set
+# CONFIG_NXP_STB225 is not set
+# CONFIG_PNX8550_JBS is not set
+# CONFIG_PNX8550_STB810 is not set
+# CONFIG_PMC_MSP is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_SGI_IP22 is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SNI_RM is not set
+# CONFIG_MACH_TX39XX is not set
+# CONFIG_MACH_TX49XX is not set
+# CONFIG_MIKROTIK_RB532 is not set
+# CONFIG_WR_PPMC is not set
+# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
+# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
+# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_CEVT_R4K_LIB=y
+CONFIG_CEVT_R4K=y
+CONFIG_CSRC_R4K_LIB=y
+CONFIG_CSRC_R4K=y
+CONFIG_DMA_NONCOHERENT=y
+CONFIG_DMA_NEED_PCI_MAP_STATE=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
+# CONFIG_HOTPLUG_CPU is not set
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_GPIO=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_IRQ_CPU=y
+CONFIG_NO_EXCEPT_FILL=y
+CONFIG_SWAP_IO_SPACE=y
+CONFIG_BOOT_ELF32=y
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+
+#
+# CPU selection
+#
+# CONFIG_CPU_LOONGSON2 is not set
+CONFIG_CPU_MIPS32_R1=y
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
+# CONFIG_CPU_R3000 is not set
+# CONFIG_CPU_TX39XX is not set
+# CONFIG_CPU_VR41XX is not set
+# CONFIG_CPU_R4300 is not set
+# CONFIG_CPU_R4X00 is not set
+# CONFIG_CPU_TX49XX is not set
+# CONFIG_CPU_R5000 is not set
+# CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R5500 is not set
+# CONFIG_CPU_R6000 is not set
+# CONFIG_CPU_NEVADA is not set
+# CONFIG_CPU_R8000 is not set
+# CONFIG_CPU_R10000 is not set
+# CONFIG_CPU_RM7000 is not set
+# CONFIG_CPU_RM9000 is not set
+# CONFIG_CPU_SB1 is not set
+# CONFIG_CPU_CAVIUM_OCTEON is not set
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_CPU_MIPS32=y
+CONFIG_CPU_MIPSR1=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_HARDWARE_WATCHPOINTS=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_32KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_MT_SMTC is not set
+CONFIG_CPU_HAS_LLSC=y
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_48 is not set
+CONFIG_HZ_100=y
+# CONFIG_HZ_128 is not set
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_256 is not set
+# CONFIG_HZ_1000 is not set
+# CONFIG_HZ_1024 is not set
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
+CONFIG_HZ=100
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_KEXEC=y
+# CONFIG_SECCOMP is not set
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_RELAY=y
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+CONFIG_RD_LZMA=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_KALLSYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+# CONFIG_ELF_CORE is not set
+# CONFIG_PCSPKR_PLATFORM is not set
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Performance Counters
+#
+# CONFIG_VM_EVENT_COUNTERS is not set
+CONFIG_STRIP_ASM_SYMS=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_SLOW_WORK is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+CONFIG_IOSCHED_DEADLINE=y
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+CONFIG_DEFAULT_DEADLINE=y
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="deadline"
+CONFIG_PROBE_INITRD_HEADER=y
+# CONFIG_FREEZER is not set
+
+#
+# Bus options (PCI, PCMCIA, EISA, ISA, TC)
+#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_MMU=y
+# CONFIG_PCCARD is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_HAVE_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+CONFIG_TRAD_SIGNALS=y
+
+#
+# Power management options
+#
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_PM is not set
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+CONFIG_IP_MROUTE=y
+# CONFIG_IP_PIMSM_V1 is not set
+# CONFIG_IP_PIMSM_V2 is not set
+CONFIG_ARPD=y
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+CONFIG_TCP_CONG_ADVANCED=y
+# CONFIG_TCP_CONG_BIC is not set
+# CONFIG_TCP_CONG_CUBIC is not set
+CONFIG_TCP_CONG_WESTWOOD=y
+# CONFIG_TCP_CONG_HTCP is not set
+# CONFIG_TCP_CONG_HSTCP is not set
+# CONFIG_TCP_CONG_HYBLA is not set
+# CONFIG_TCP_CONG_VEGAS is not set
+# CONFIG_TCP_CONG_SCALABLE is not set
+# CONFIG_TCP_CONG_LP is not set
+# CONFIG_TCP_CONG_VENO is not set
+# CONFIG_TCP_CONG_YEAH is not set
+# CONFIG_TCP_CONG_ILLINOIS is not set
+# CONFIG_DEFAULT_BIC is not set
+# CONFIG_DEFAULT_CUBIC is not set
+# CONFIG_DEFAULT_HTCP is not set
+# CONFIG_DEFAULT_VEGAS is not set
+CONFIG_DEFAULT_WESTWOOD=y
+# CONFIG_DEFAULT_RENO is not set
+CONFIG_DEFAULT_TCP_CONG="westwood"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+# CONFIG_BRIDGE_NETFILTER is not set
+
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
+CONFIG_NF_CONNTRACK=m
+# CONFIG_NF_CT_ACCT is not set
+CONFIG_NF_CONNTRACK_MARK=y
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+# CONFIG_NF_CT_PROTO_DCCP is not set
+# CONFIG_NF_CT_PROTO_SCTP is not set
+# CONFIG_NF_CT_PROTO_UDPLITE is not set
+# CONFIG_NF_CONNTRACK_AMANDA is not set
+CONFIG_NF_CONNTRACK_FTP=m
+# CONFIG_NF_CONNTRACK_H323 is not set
+CONFIG_NF_CONNTRACK_IRC=m
+# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
+# CONFIG_NF_CONNTRACK_PPTP is not set
+# CONFIG_NF_CONNTRACK_SANE is not set
+# CONFIG_NF_CONNTRACK_SIP is not set
+CONFIG_NF_CONNTRACK_TFTP=m
+# CONFIG_NF_CT_NETLINK is not set
+# CONFIG_NETFILTER_TPROXY is not set
+CONFIG_NETFILTER_XTABLES=m
+# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
+# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
+# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+# CONFIG_NETFILTER_XT_TARGET_HL is not set
+# CONFIG_NETFILTER_XT_TARGET_LED is not set
+# CONFIG_NETFILTER_XT_TARGET_MARK is not set
+# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
+# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
+# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
+# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
+# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set
+# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
+# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
+# CONFIG_NETFILTER_XT_MATCH_ESP is not set
+# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_HELPER is not set
+# CONFIG_NETFILTER_XT_MATCH_HL is not set
+# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
+# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+# CONFIG_NETFILTER_XT_MATCH_MARK is not set
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
+# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
+# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
+# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
+# CONFIG_NETFILTER_XT_MATCH_REALM is not set
+# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
+# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
+# CONFIG_NETFILTER_XT_MATCH_STRING is not set
+# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
+# CONFIG_NETFILTER_XT_MATCH_TIME is not set
+# CONFIG_NETFILTER_XT_MATCH_U32 is not set
+# CONFIG_IP_VS is not set
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_DEFRAG_IPV4=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
+# CONFIG_IP_NF_QUEUE is not set
+CONFIG_IP_NF_IPTABLES=m
+# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
+# CONFIG_IP_NF_MATCH_AH is not set
+# CONFIG_IP_NF_MATCH_ECN is not set
+# CONFIG_IP_NF_MATCH_TTL is not set
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+# CONFIG_IP_NF_TARGET_ULOG is not set
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+# CONFIG_IP_NF_TARGET_NETMAP is not set
+# CONFIG_IP_NF_TARGET_REDIRECT is not set
+# CONFIG_NF_NAT_SNMP_BASIC is not set
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+# CONFIG_NF_NAT_AMANDA is not set
+# CONFIG_NF_NAT_PPTP is not set
+# CONFIG_NF_NAT_H323 is not set
+# CONFIG_NF_NAT_SIP is not set
+CONFIG_IP_NF_MANGLE=m
+# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
+# CONFIG_IP_NF_TARGET_ECN is not set
+# CONFIG_IP_NF_TARGET_TTL is not set
+CONFIG_IP_NF_RAW=m
+# CONFIG_IP_NF_ARPTABLES is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+CONFIG_ATM=m
+# CONFIG_ATM_CLIP is not set
+# CONFIG_ATM_LANE is not set
+CONFIG_ATM_BR2684=m
+CONFIG_ATM_BR2684_IPFILTER=y
+CONFIG_STP=y
+CONFIG_BRIDGE=y
+# CONFIG_NET_DSA is not set
+CONFIG_VLAN_8021Q=y
+# CONFIG_VLAN_8021Q_GVRP is not set
+# CONFIG_DECNET is not set
+CONFIG_LLC=y
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+CONFIG_NET_SCHED=y
+
+#
+# Queueing/Scheduling
+#
+# CONFIG_NET_SCH_CBQ is not set
+# CONFIG_NET_SCH_HTB is not set
+# CONFIG_NET_SCH_HFSC is not set
+# CONFIG_NET_SCH_ATM is not set
+# CONFIG_NET_SCH_PRIO is not set
+# CONFIG_NET_SCH_MULTIQ is not set
+# CONFIG_NET_SCH_RED is not set
+# CONFIG_NET_SCH_SFQ is not set
+# CONFIG_NET_SCH_TEQL is not set
+# CONFIG_NET_SCH_TBF is not set
+# CONFIG_NET_SCH_GRED is not set
+# CONFIG_NET_SCH_DSMARK is not set
+# CONFIG_NET_SCH_NETEM is not set
+# CONFIG_NET_SCH_DRR is not set
+# CONFIG_NET_SCH_INGRESS is not set
+
+#
+# Classification
+#
+# CONFIG_NET_CLS_BASIC is not set
+# CONFIG_NET_CLS_TCINDEX is not set
+# CONFIG_NET_CLS_ROUTE4 is not set
+# CONFIG_NET_CLS_FW is not set
+# CONFIG_NET_CLS_U32 is not set
+# CONFIG_NET_CLS_RSVP is not set
+# CONFIG_NET_CLS_RSVP6 is not set
+# CONFIG_NET_CLS_FLOW is not set
+# CONFIG_NET_EMATCH is not set
+CONFIG_NET_CLS_ACT=y
+CONFIG_NET_ACT_POLICE=y
+# CONFIG_NET_ACT_GACT is not set
+# CONFIG_NET_ACT_MIRRED is not set
+# CONFIG_NET_ACT_IPT is not set
+# CONFIG_NET_ACT_NAT is not set
+# CONFIG_NET_ACT_PEDIT is not set
+# CONFIG_NET_ACT_SIMP is not set
+# CONFIG_NET_ACT_SKBEDIT is not set
+CONFIG_NET_SCH_FIFO=y
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+CONFIG_HAMRADIO=y
+
+#
+# Packet Radio protocols
+#
+# CONFIG_AX25 is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_FIB_RULES=y
+CONFIG_WIRELESS=y
+CONFIG_CFG80211=m
+# CONFIG_CFG80211_REG_DEBUG is not set
+# CONFIG_CFG80211_DEBUGFS is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
+CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+# CONFIG_LIB80211 is not set
+CONFIG_MAC80211=m
+CONFIG_MAC80211_DEFAULT_PS=y
+CONFIG_MAC80211_DEFAULT_PS_VALUE=1
+
+#
+# Rate control algorithm selection
+#
+CONFIG_MAC80211_RC_PID=y
+CONFIG_MAC80211_RC_MINSTREL=y
+CONFIG_MAC80211_RC_DEFAULT_PID=y
+# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set
+CONFIG_MAC80211_RC_DEFAULT="pid"
+# CONFIG_MAC80211_MESH is not set
+# CONFIG_MAC80211_LEDS is not set
+# CONFIG_MAC80211_DEBUGFS is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_STAA=y
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_IFB is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+CONFIG_FIXED_PHY=y
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+CONFIG_CPMAC=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+CONFIG_WLAN_80211=y
+# CONFIG_LIBERTAS is not set
+# CONFIG_LIBERTAS_THINFIRM is not set
+# CONFIG_MAC80211_HWSIM is not set
+# CONFIG_P54_COMMON is not set
+# CONFIG_HOSTAP is not set
+# CONFIG_B43 is not set
+# CONFIG_B43LEGACY is not set
+# CONFIG_RT2X00 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+CONFIG_ATM_DRIVERS=y
+# CONFIG_ATM_DUMMY is not set
+# CONFIG_ATM_TCP is not set
+CONFIG_PPP=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+# CONFIG_PPP_SYNC_TTY is not set
+# CONFIG_PPP_DEFLATE is not set
+# CONFIG_PPP_BSDCOMP is not set
+# CONFIG_PPP_MPPE is not set
+CONFIG_PPPOE=m
+CONFIG_PPPOATM=m
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=m
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=2
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_AR7_WDT=y
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB=y
+# CONFIG_SSB_SILENT is not set
+# CONFIG_SSB_DEBUG is not set
+CONFIG_SSB_SERIAL=y
+CONFIG_SSB_DRIVER_MIPS=y
+CONFIG_SSB_EMBEDDED=y
+CONFIG_SSB_DRIVER_EXTIF=y
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_SOUND is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_GPIO is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+CONFIG_VLYNQ=y
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+# CONFIG_PROC_PAGE_MONITOR is not set
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_FS_XATTR is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+# CONFIG_CRAMFS is not set
+CONFIG_SQUASHFS=y
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+# CONFIG_NFS_FS is not set
+# CONFIG_NFSD is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_CMDLINE="rootfstype=squashfs,jffs2"
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_ALGAPI2=m
+CONFIG_CRYPTO_AEAD2=m
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_BLKCIPHER2=m
+CONFIG_CRYPTO_HASH2=m
+CONFIG_CRYPTO_RNG2=m
+CONFIG_CRYPTO_PCOMP=m
+CONFIG_CRYPTO_MANAGER=m
+CONFIG_CRYPTO_MANAGER2=m
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=m
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=m
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=m
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/mips/gt64120/wrppmc/serial.c b/arch/mips/gt64120/wrppmc/serial.c
index 5ec1c2ffd3a5..6f9d0858f596 100644
--- a/arch/mips/gt64120/wrppmc/serial.c
+++ b/arch/mips/gt64120/wrppmc/serial.c
@@ -1,7 +1,7 @@
 /*
  *  Registration of WRPPMC UART platform device.
  *
- *  Copyright (C) 2007  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2007  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/include/asm/amon.h b/arch/mips/include/asm/amon.h
new file mode 100644
index 000000000000..c3dc1a68dd8d
--- /dev/null
+++ b/arch/mips/include/asm/amon.h
@@ -0,0 +1,7 @@
+/*
+ * Amon support
+ */
+
+int amon_cpu_avail(int);
+void amon_cpu_start(int, unsigned long, unsigned long,
+		    unsigned long, unsigned long);
diff --git a/arch/mips/include/asm/ds1287.h b/arch/mips/include/asm/ds1287.h
index ba1702e86931..3af0b8fb3b8c 100644
--- a/arch/mips/include/asm/ds1287.h
+++ b/arch/mips/include/asm/ds1287.h
@@ -1,7 +1,7 @@
 /*
  *  DS1287 timer functions.
  *
- *  Copyright (C) 2008  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2008  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/include/asm/elf.h b/arch/mips/include/asm/elf.h
index d58f128aa747..7990694cda22 100644
--- a/arch/mips/include/asm/elf.h
+++ b/arch/mips/include/asm/elf.h
@@ -316,9 +316,13 @@ extern void elf_dump_regs(elf_greg_t *, struct pt_regs *regs);
 extern int dump_task_regs(struct task_struct *, elf_gregset_t *);
 extern int dump_task_fpu(struct task_struct *, elf_fpregset_t *);
 
+#ifndef ELF_CORE_COPY_REGS
 #define ELF_CORE_COPY_REGS(elf_regs, regs)			\
 	elf_dump_regs((elf_greg_t *)&(elf_regs), regs);
+#endif
+#ifndef ELF_CORE_COPY_TASK_REGS
 #define ELF_CORE_COPY_TASK_REGS(tsk, elf_regs) dump_task_regs(tsk, elf_regs)
+#endif
 #define ELF_CORE_COPY_FPREGS(tsk, elf_fpregs)			\
 	dump_task_fpu(tsk, elf_fpregs)
 
diff --git a/arch/mips/include/asm/gcmpregs.h b/arch/mips/include/asm/gcmpregs.h
index d74a8a4ca861..36fd969d64d6 100644
--- a/arch/mips/include/asm/gcmpregs.h
+++ b/arch/mips/include/asm/gcmpregs.h
@@ -114,4 +114,6 @@
 #define GCMP_CCB_DINTGROUP_OFS		0x0030		/* DINT Group Participate */
 #define GCMP_CCB_DBGGROUP_OFS		0x0100		/* DebugBreak Group */
 
+extern int __init gcmp_probe(unsigned long, unsigned long);
+
 #endif /* _ASM_GCMPREGS_H */
diff --git a/arch/mips/include/asm/gic.h b/arch/mips/include/asm/gic.h
index 954807d9d66a..10292e37c1f7 100644
--- a/arch/mips/include/asm/gic.h
+++ b/arch/mips/include/asm/gic.h
@@ -20,7 +20,11 @@
 #define GIC_TRIG_EDGE			1
 #define GIC_TRIG_LEVEL			0
 
+#if CONFIG_SMP
+#define GIC_NUM_INTRS			(24 + NR_CPUS * 2)
+#else
 #define GIC_NUM_INTRS			32
+#endif
 
 #define MSK(n) ((1 << (n)) - 1)
 #define REG32(addr)		(*(volatile unsigned int *) (addr))
@@ -483,5 +487,7 @@ extern void gic_init(unsigned long gic_base_addr,
 
 extern unsigned int gic_get_int(void);
 extern void gic_send_ipi(unsigned int intr);
+extern unsigned int plat_ipi_call_int_xlate(unsigned int);
+extern unsigned int plat_ipi_resched_int_xlate(unsigned int);
 
 #endif /* _ASM_GICREGS_H */
diff --git a/arch/mips/include/asm/irq_gt641xx.h b/arch/mips/include/asm/irq_gt641xx.h
index f9a7c3ac2e66..250a2407b599 100644
--- a/arch/mips/include/asm/irq_gt641xx.h
+++ b/arch/mips/include/asm/irq_gt641xx.h
@@ -1,7 +1,7 @@
 /*
  *  Galileo/Marvell GT641xx IRQ definitions.
  *
- *  Copyright (C) 2007  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2007  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/include/asm/mach-ar7/ar7.h b/arch/mips/include/asm/mach-ar7/ar7.h
new file mode 100644
index 000000000000..de71694614de
--- /dev/null
+++ b/arch/mips/include/asm/mach-ar7/ar7.h
@@ -0,0 +1,178 @@
+/*
+ * Copyright (C) 2006,2007 Felix Fietkau <nbd@openwrt.org>
+ * Copyright (C) 2006,2007 Eugene Konev <ejka@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#ifndef __AR7_H__
+#define __AR7_H__
+
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/errno.h>
+
+#include <asm/addrspace.h>
+
+#define AR7_SDRAM_BASE	0x14000000
+
+#define AR7_REGS_BASE	0x08610000
+
+#define AR7_REGS_MAC0	(AR7_REGS_BASE + 0x0000)
+#define AR7_REGS_GPIO	(AR7_REGS_BASE + 0x0900)
+/* 0x08610A00 - 0x08610BFF (512 bytes, 128 bytes / clock) */
+#define AR7_REGS_POWER	(AR7_REGS_BASE + 0x0a00)
+#define AR7_REGS_CLOCKS (AR7_REGS_POWER + 0x80)
+#define UR8_REGS_CLOCKS (AR7_REGS_POWER + 0x20)
+#define AR7_REGS_UART0	(AR7_REGS_BASE + 0x0e00)
+#define AR7_REGS_USB	(AR7_REGS_BASE + 0x1200)
+#define AR7_REGS_RESET	(AR7_REGS_BASE + 0x1600)
+#define AR7_REGS_VLYNQ0	(AR7_REGS_BASE + 0x1800)
+#define AR7_REGS_DCL	(AR7_REGS_BASE + 0x1a00)
+#define AR7_REGS_VLYNQ1	(AR7_REGS_BASE + 0x1c00)
+#define AR7_REGS_MDIO	(AR7_REGS_BASE + 0x1e00)
+#define AR7_REGS_IRQ	(AR7_REGS_BASE + 0x2400)
+#define AR7_REGS_MAC1	(AR7_REGS_BASE + 0x2800)
+
+#define AR7_REGS_WDT	(AR7_REGS_BASE + 0x1f00)
+#define UR8_REGS_WDT	(AR7_REGS_BASE + 0x0b00)
+#define UR8_REGS_UART1	(AR7_REGS_BASE + 0x0f00)
+
+#define AR7_RESET_PEREPHERIAL	0x0
+#define AR7_RESET_SOFTWARE	0x4
+#define AR7_RESET_STATUS	0x8
+
+#define AR7_RESET_BIT_CPMAC_LO	17
+#define AR7_RESET_BIT_CPMAC_HI	21
+#define AR7_RESET_BIT_MDIO	22
+#define AR7_RESET_BIT_EPHY	26
+
+/* GPIO control registers */
+#define AR7_GPIO_INPUT	0x0
+#define AR7_GPIO_OUTPUT	0x4
+#define AR7_GPIO_DIR	0x8
+#define AR7_GPIO_ENABLE	0xc
+
+#define AR7_CHIP_7100	0x18
+#define AR7_CHIP_7200	0x2b
+#define AR7_CHIP_7300	0x05
+
+/* Interrupts */
+#define AR7_IRQ_UART0	15
+#define AR7_IRQ_UART1	16
+
+/* Clocks */
+#define AR7_AFE_CLOCK	35328000
+#define AR7_REF_CLOCK	25000000
+#define AR7_XTAL_CLOCK	24000000
+
+struct plat_cpmac_data {
+	int reset_bit;
+	int power_bit;
+	u32 phy_mask;
+	char dev_addr[6];
+};
+
+struct plat_dsl_data {
+	int reset_bit_dsl;
+	int reset_bit_sar;
+};
+
+extern int ar7_cpu_clock, ar7_bus_clock, ar7_dsp_clock;
+
+static inline u16 ar7_chip_id(void)
+{
+	return readl((void *)KSEG1ADDR(AR7_REGS_GPIO + 0x14)) & 0xffff;
+}
+
+static inline u8 ar7_chip_rev(void)
+{
+	return (readl((void *)KSEG1ADDR(AR7_REGS_GPIO + 0x14)) >> 16) & 0xff;
+}
+
+static inline int ar7_cpu_freq(void)
+{
+	return ar7_cpu_clock;
+}
+
+static inline int ar7_bus_freq(void)
+{
+	return ar7_bus_clock;
+}
+
+static inline int ar7_vbus_freq(void)
+{
+	return ar7_bus_clock / 2;
+}
+#define ar7_cpmac_freq ar7_vbus_freq
+
+static inline int ar7_dsp_freq(void)
+{
+	return ar7_dsp_clock;
+}
+
+static inline int ar7_has_high_cpmac(void)
+{
+	u16 chip_id = ar7_chip_id();
+	switch (chip_id) {
+	case AR7_CHIP_7100:
+	case AR7_CHIP_7200:
+		return 0;
+	case AR7_CHIP_7300:
+		return 1;
+	default:
+		return -ENXIO;
+	}
+}
+#define ar7_has_high_vlynq ar7_has_high_cpmac
+#define ar7_has_second_uart ar7_has_high_cpmac
+
+static inline void ar7_device_enable(u32 bit)
+{
+	void *reset_reg =
+		(void *)KSEG1ADDR(AR7_REGS_RESET + AR7_RESET_PEREPHERIAL);
+	writel(readl(reset_reg) | (1 << bit), reset_reg);
+	msleep(20);
+}
+
+static inline void ar7_device_disable(u32 bit)
+{
+	void *reset_reg =
+		(void *)KSEG1ADDR(AR7_REGS_RESET + AR7_RESET_PEREPHERIAL);
+	writel(readl(reset_reg) & ~(1 << bit), reset_reg);
+	msleep(20);
+}
+
+static inline void ar7_device_reset(u32 bit)
+{
+	ar7_device_disable(bit);
+	ar7_device_enable(bit);
+}
+
+static inline void ar7_device_on(u32 bit)
+{
+	void *power_reg = (void *)KSEG1ADDR(AR7_REGS_POWER);
+	writel(readl(power_reg) | (1 << bit), power_reg);
+	msleep(20);
+}
+
+static inline void ar7_device_off(u32 bit)
+{
+	void *power_reg = (void *)KSEG1ADDR(AR7_REGS_POWER);
+	writel(readl(power_reg) & ~(1 << bit), power_reg);
+	msleep(20);
+}
+
+#endif /* __AR7_H__ */
diff --git a/arch/mips/include/asm/mach-ar7/gpio.h b/arch/mips/include/asm/mach-ar7/gpio.h
new file mode 100644
index 000000000000..cbe9c4f126df
--- /dev/null
+++ b/arch/mips/include/asm/mach-ar7/gpio.h
@@ -0,0 +1,110 @@
+/*
+ * Copyright (C) 2007 Florian Fainelli <florian@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#ifndef __AR7_GPIO_H__
+#define __AR7_GPIO_H__
+
+#include <asm/mach-ar7/ar7.h>
+
+#define AR7_GPIO_MAX 32
+
+extern int gpio_request(unsigned gpio, const char *label);
+extern void gpio_free(unsigned gpio);
+
+/* Common GPIO layer */
+static inline int gpio_get_value(unsigned gpio)
+{
+	void __iomem *gpio_in =
+		(void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + AR7_GPIO_INPUT);
+
+	return readl(gpio_in) & (1 << gpio);
+}
+
+static inline void gpio_set_value(unsigned gpio, int value)
+{
+	void __iomem *gpio_out =
+		(void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + AR7_GPIO_OUTPUT);
+	unsigned tmp;
+
+	tmp = readl(gpio_out) & ~(1 << gpio);
+	if (value)
+		tmp |= 1 << gpio;
+	writel(tmp, gpio_out);
+}
+
+static inline int gpio_direction_input(unsigned gpio)
+{
+	void __iomem *gpio_dir =
+		(void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + AR7_GPIO_DIR);
+
+	if (gpio >= AR7_GPIO_MAX)
+		return -EINVAL;
+
+	writel(readl(gpio_dir) | (1 << gpio), gpio_dir);
+
+	return 0;
+}
+
+static inline int gpio_direction_output(unsigned gpio, int value)
+{
+	void __iomem *gpio_dir =
+		(void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + AR7_GPIO_DIR);
+
+	if (gpio >= AR7_GPIO_MAX)
+		return -EINVAL;
+
+	gpio_set_value(gpio, value);
+	writel(readl(gpio_dir) & ~(1 << gpio), gpio_dir);
+
+	return 0;
+}
+
+static inline int gpio_to_irq(unsigned gpio)
+{
+	return -EINVAL;
+}
+
+static inline int irq_to_gpio(unsigned irq)
+{
+	return -EINVAL;
+}
+
+/* Board specific GPIO functions */
+static inline int ar7_gpio_enable(unsigned gpio)
+{
+	void __iomem *gpio_en =
+		(void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + AR7_GPIO_ENABLE);
+
+	writel(readl(gpio_en) | (1 << gpio), gpio_en);
+
+	return 0;
+}
+
+static inline int ar7_gpio_disable(unsigned gpio)
+{
+	void __iomem *gpio_en =
+		(void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + AR7_GPIO_ENABLE);
+
+	writel(readl(gpio_en) & ~(1 << gpio), gpio_en);
+
+	return 0;
+}
+
+#include <asm-generic/gpio.h>
+
+#endif
diff --git a/arch/mips/include/asm/mach-ar7/irq.h b/arch/mips/include/asm/mach-ar7/irq.h
new file mode 100644
index 000000000000..39e9757e3d93
--- /dev/null
+++ b/arch/mips/include/asm/mach-ar7/irq.h
@@ -0,0 +1,16 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Shamelessly copied from asm-mips/mach-emma2rh/
+ * Copyright (C) 2003 by Ralf Baechle
+ */
+#ifndef __ASM_AR7_IRQ_H
+#define __ASM_AR7_IRQ_H
+
+#define NR_IRQS	256
+
+#include_next <irq.h>
+
+#endif /* __ASM_AR7_IRQ_H */
diff --git a/arch/mips/include/asm/mach-ar7/prom.h b/arch/mips/include/asm/mach-ar7/prom.h
new file mode 100644
index 000000000000..088f61fe85ea
--- /dev/null
+++ b/arch/mips/include/asm/mach-ar7/prom.h
@@ -0,0 +1,25 @@
+/*
+ * Copyright (C) 2006, 2007 Florian Fainelli <florian@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#ifndef __PROM_H__
+#define __PROM_H__
+
+extern char *prom_getenv(const char *name);
+extern void prom_meminit(void);
+
+#endif /* __PROM_H__ */
diff --git a/arch/mips/include/asm/mach-ar7/spaces.h b/arch/mips/include/asm/mach-ar7/spaces.h
new file mode 100644
index 000000000000..ac28f273449c
--- /dev/null
+++ b/arch/mips/include/asm/mach-ar7/spaces.h
@@ -0,0 +1,22 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994 - 1999, 2000, 03, 04 Ralf Baechle
+ * Copyright (C) 2000, 2002  Maciej W. Rozycki
+ * Copyright (C) 1990, 1999, 2000 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_AR7_SPACES_H
+#define _ASM_AR7_SPACES_H
+
+/*
+ * This handles the memory map.
+ * We handle pages at KSEG0 for kernels with 32 bit address space.
+ */
+#define PAGE_OFFSET		0x94000000UL
+#define PHYS_OFFSET		0x14000000UL
+
+#include <asm/mach-generic/spaces.h>
+
+#endif /* __ASM_AR7_SPACES_H */
diff --git a/arch/mips/include/asm/mach-ar7/war.h b/arch/mips/include/asm/mach-ar7/war.h
new file mode 100644
index 000000000000..f4862b563080
--- /dev/null
+++ b/arch/mips/include/asm/mach-ar7/war.h
@@ -0,0 +1,25 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
+ */
+#ifndef __ASM_MIPS_MACH_AR7_WAR_H
+#define __ASM_MIPS_MACH_AR7_WAR_H
+
+#define R4600_V1_INDEX_ICACHEOP_WAR	0
+#define R4600_V1_HIT_CACHEOP_WAR	0
+#define R4600_V2_HIT_CACHEOP_WAR	0
+#define R5432_CP0_INTERRUPT_WAR		0
+#define BCM1250_M3_WAR			0
+#define SIBYTE_1956_WAR			0
+#define MIPS4K_ICACHE_REFILL_WAR	0
+#define MIPS_CACHE_SYNC_WAR		0
+#define TX49XX_ICACHE_INDEX_INV_WAR	0
+#define RM9000_CDEX_SMP_WAR		0
+#define ICACHE_REFILLS_WORKAROUND_WAR	0
+#define R10000_LLSC_WAR			0
+#define MIPS34K_MISSED_ITLB_WAR		0
+
+#endif /* __ASM_MIPS_MACH_AR7_WAR_H */
diff --git a/arch/mips/include/asm/mach-cobalt/irq.h b/arch/mips/include/asm/mach-cobalt/irq.h
index 57c8c9ac5851..9da9acf5dcba 100644
--- a/arch/mips/include/asm/mach-cobalt/irq.h
+++ b/arch/mips/include/asm/mach-cobalt/irq.h
@@ -8,7 +8,7 @@
  * Copyright (C) 1997 Cobalt Microserver
  * Copyright (C) 1997, 2003 Ralf Baechle
  * Copyright (C) 2001-2003 Liam Davies (ldavies@agile.tv)
- * Copyright (C) 2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2007 Yoichi Yuasa <yuasa@linux-mips.org>
  */
 #ifndef _ASM_COBALT_IRQ_H
 #define _ASM_COBALT_IRQ_H
diff --git a/arch/mips/include/asm/mach-cobalt/mach-gt64120.h b/arch/mips/include/asm/mach-cobalt/mach-gt64120.h
index ae9c5523c7ef..f8afec3f2943 100644
--- a/arch/mips/include/asm/mach-cobalt/mach-gt64120.h
+++ b/arch/mips/include/asm/mach-cobalt/mach-gt64120.h
@@ -1,5 +1,5 @@
 /*
- *  Copyright (C) 2006  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2006  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/cavium-octeon/pci-common.h b/arch/mips/include/asm/octeon/pci-octeon.h
index 74ae79991e45..6ac5d3e3398e 100644
--- a/arch/mips/cavium-octeon/pci-common.h
+++ b/arch/mips/include/asm/octeon/pci-octeon.h
@@ -3,23 +3,29 @@
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  *
- * Copyright (C) 2005-2007 Cavium Networks
+ * Copyright (C) 2005-2009 Cavium Networks
  */
-#ifndef __OCTEON_PCI_COMMON_H__
-#define __OCTEON_PCI_COMMON_H__
+
+#ifndef __PCI_OCTEON_H__
+#define __PCI_OCTEON_H__
 
 #include <linux/pci.h>
 
 /* Some PCI cards require delays when accessing config space. */
 #define PCI_CONFIG_SPACE_DELAY 10000
 
-/* pcibios_map_irq() is defined inside pci-common.c. All it does is call the
-   Octeon specific version pointed to by this variable. This function needs to
-   change for PCI or PCIe based hosts */
-extern typeof(pcibios_map_irq) *octeon_pcibios_map_irq;
+/*
+ * pcibios_map_irq() is defined inside pci-octeon.c. All it does is
+ * call the Octeon specific version pointed to by this variable. This
+ * function needs to change for PCI or PCIe based hosts.
+ */
+extern int (*octeon_pcibios_map_irq)(const struct pci_dev *dev,
+				     u8 slot, u8 pin);
 
-/* The following defines are only used when octeon_dma_bar_type =
-   OCTEON_DMA_BAR_TYPE_BIG */
+/*
+ * The following defines are used when octeon_dma_bar_type =
+ * OCTEON_DMA_BAR_TYPE_BIG
+ */
 #define OCTEON_PCI_BAR1_HOLE_BITS 5
 #define OCTEON_PCI_BAR1_HOLE_SIZE (1ul<<(OCTEON_PCI_BAR1_HOLE_BITS+3))
 
@@ -30,9 +36,9 @@ enum octeon_dma_bar_type {
 	OCTEON_DMA_BAR_TYPE_PCIE
 };
 
-/**
- * This is a variable to tell the DMA mapping system in dma-octeon.c
- * how to map PCI DMA addresses.
+/*
+ * This tells the DMA mapping system in dma-octeon.c how to map PCI
+ * DMA addresses.
  */
 extern enum octeon_dma_bar_type octeon_dma_bar_type;
 
diff --git a/arch/mips/include/asm/page.h b/arch/mips/include/asm/page.h
index dc0eaa731281..96a14a426a7c 100644
--- a/arch/mips/include/asm/page.h
+++ b/arch/mips/include/asm/page.h
@@ -165,7 +165,14 @@ typedef struct { unsigned long pgprot; } pgprot_t;
 
 #ifdef CONFIG_FLATMEM
 
-#define pfn_valid(pfn)		((pfn) >= ARCH_PFN_OFFSET && (pfn) < max_mapnr)
+#define pfn_valid(pfn)							\
+({									\
+	unsigned long __pfn = (pfn);					\
+	/* avoid <linux/bootmem.h> include hell */			\
+	extern unsigned long min_low_pfn;				\
+									\
+	__pfn >= min_low_pfn && __pfn < max_mapnr;			\
+})
 
 #elif defined(CONFIG_SPARSEMEM)
 
diff --git a/arch/mips/include/asm/reg.h b/arch/mips/include/asm/reg.h
index 634b55d7e7f6..910e71a12466 100644
--- a/arch/mips/include/asm/reg.h
+++ b/arch/mips/include/asm/reg.h
@@ -69,7 +69,7 @@
 
 #endif
 
-#ifdef CONFIG_64BIT
+#if defined(CONFIG_64BIT) && !defined(WANT_COMPAT_REG_H)
 
 #define EF_R0			 0
 #define EF_R1			 1
diff --git a/arch/mips/include/asm/swab.h b/arch/mips/include/asm/swab.h
index 99993c0d6c12..97c2f81b4b43 100644
--- a/arch/mips/include/asm/swab.h
+++ b/arch/mips/include/asm/swab.h
@@ -38,7 +38,11 @@ static inline __attribute_const__ __u32 __arch_swab32(__u32 x)
 }
 #define __arch_swab32 __arch_swab32
 
-#ifdef CONFIG_CPU_MIPS64_R2
+/*
+ * Having already checked for CONFIG_CPU_MIPSR2, enable the
+ * optimized version for 64-bit kernel on r2 CPUs.
+ */
+#ifdef CONFIG_64BIT
 static inline __attribute_const__ __u64 __arch_swab64(__u64 x)
 {
 	__asm__(
@@ -50,6 +54,6 @@ static inline __attribute_const__ __u64 __arch_swab64(__u64 x)
 	return x;
 }
 #define __arch_swab64 __arch_swab64
-#endif /* CONFIG_CPU_MIPS64_R2 */
+#endif /* CONFIG_64BIT */
 #endif /* CONFIG_CPU_MIPSR2 */
 #endif /* _ASM_SWAB_H */
diff --git a/arch/mips/include/asm/thread_info.h b/arch/mips/include/asm/thread_info.h
index 143a48136a4b..f9df720d2e40 100644
--- a/arch/mips/include/asm/thread_info.h
+++ b/arch/mips/include/asm/thread_info.h
@@ -39,8 +39,6 @@ struct thread_info {
 
 /*
  * macros/functions for gaining access to the thread information structure
- *
- * preempt_count needs to be 1 initially, until the scheduler is functional.
  */
 #define INIT_THREAD_INFO(tsk)			\
 {						\
@@ -48,7 +46,7 @@ struct thread_info {
 	.exec_domain	= &default_exec_domain,	\
 	.flags		= _TIF_FIXADE,		\
 	.cpu		= 0,			\
-	.preempt_count	= 1,			\
+	.preempt_count	= INIT_PREEMPT_COUNT,	\
 	.addr_limit	= KERNEL_DS,		\
 	.restart_block	= {			\
 		.fn = do_no_restart_syscall,	\
diff --git a/arch/mips/include/asm/unistd.h b/arch/mips/include/asm/unistd.h
index 40005010827c..b70c49fdda26 100644
--- a/arch/mips/include/asm/unistd.h
+++ b/arch/mips/include/asm/unistd.h
@@ -352,16 +352,18 @@
 #define __NR_inotify_init1		(__NR_Linux + 329)
 #define __NR_preadv			(__NR_Linux + 330)
 #define __NR_pwritev			(__NR_Linux + 331)
+#define __NR_rt_tgsigqueueinfo		(__NR_Linux + 332)
+#define __NR_perf_counter_open		(__NR_Linux + 333)
 
 /*
  * Offset of the last Linux o32 flavoured syscall
  */
-#define __NR_Linux_syscalls		331
+#define __NR_Linux_syscalls		333
 
 #endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */
 
 #define __NR_O32_Linux			4000
-#define __NR_O32_Linux_syscalls		331
+#define __NR_O32_Linux_syscalls		333
 
 #if _MIPS_SIM == _MIPS_SIM_ABI64
 
@@ -660,16 +662,18 @@
 #define __NR_inotify_init1		(__NR_Linux + 288)
 #define __NR_preadv			(__NR_Linux + 289)
 #define __NR_pwritev			(__NR_Linux + 290)
+#define __NR_rt_tgsigqueueinfo		(__NR_Linux + 291)
+#define __NR_perf_counter_open		(__NR_Linux + 292)
 
 /*
  * Offset of the last Linux 64-bit flavoured syscall
  */
-#define __NR_Linux_syscalls		290
+#define __NR_Linux_syscalls		292
 
 #endif /* _MIPS_SIM == _MIPS_SIM_ABI64 */
 
 #define __NR_64_Linux			5000
-#define __NR_64_Linux_syscalls		290
+#define __NR_64_Linux_syscalls		292
 
 #if _MIPS_SIM == _MIPS_SIM_NABI32
 
@@ -972,16 +976,18 @@
 #define __NR_inotify_init1		(__NR_Linux + 292)
 #define __NR_preadv			(__NR_Linux + 293)
 #define __NR_pwritev			(__NR_Linux + 294)
+#define __NR_rt_tgsigqueueinfo		(__NR_Linux + 295)
+#define __NR_perf_counter_open		(__NR_Linux + 296)
 
 /*
  * Offset of the last N32 flavoured syscall
  */
-#define __NR_Linux_syscalls		294
+#define __NR_Linux_syscalls		296
 
 #endif /* _MIPS_SIM == _MIPS_SIM_NABI32 */
 
 #define __NR_N32_Linux			6000
-#define __NR_N32_Linux_syscalls		294
+#define __NR_N32_Linux_syscalls		296
 
 #ifdef __KERNEL__
 
diff --git a/arch/mips/include/asm/vr41xx/capcella.h b/arch/mips/include/asm/vr41xx/capcella.h
index e0ee05a3dfcc..fcc6569414fa 100644
--- a/arch/mips/include/asm/vr41xx/capcella.h
+++ b/arch/mips/include/asm/vr41xx/capcella.h
@@ -1,7 +1,7 @@
 /*
  *  capcella.h, Include file for ZAO Networks Capcella.
  *
- *  Copyright (C) 2002-2004  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2002-2004  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/include/asm/vr41xx/giu.h b/arch/mips/include/asm/vr41xx/giu.h
index 0bcdd3a5c256..6a90bc1d916b 100644
--- a/arch/mips/include/asm/vr41xx/giu.h
+++ b/arch/mips/include/asm/vr41xx/giu.h
@@ -1,7 +1,7 @@
 /*
  *  Include file for NEC VR4100 series General-purpose I/O Unit.
  *
- *  Copyright (C) 2005  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2005-2009  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
@@ -41,7 +41,8 @@ typedef enum {
 	IRQ_SIGNAL_HOLD,
 } irq_signal_t;
 
-extern void vr41xx_set_irq_trigger(unsigned int pin, irq_trigger_t trigger, irq_signal_t signal);
+extern void vr41xx_set_irq_trigger(unsigned int pin, irq_trigger_t trigger,
+				   irq_signal_t signal);
 
 typedef enum {
 	IRQ_LEVEL_LOW,
@@ -51,23 +52,6 @@ typedef enum {
 extern void vr41xx_set_irq_level(unsigned int pin, irq_level_t level);
 
 typedef enum {
-	GPIO_DATA_LOW,
-	GPIO_DATA_HIGH,
-	GPIO_DATA_INVAL,
-} gpio_data_t;
-
-extern gpio_data_t vr41xx_gpio_get_pin(unsigned int pin);
-extern int vr41xx_gpio_set_pin(unsigned int pin, gpio_data_t data);
-
-typedef enum {
-	GPIO_INPUT,
-	GPIO_OUTPUT,
-	GPIO_OUTPUT_DISABLE,
-} gpio_direction_t;
-
-extern int vr41xx_gpio_set_direction(unsigned int pin, gpio_direction_t dir);
-
-typedef enum {
 	GPIO_PULL_DOWN,
 	GPIO_PULL_UP,
 	GPIO_PULL_DISABLE,
diff --git a/arch/mips/include/asm/vr41xx/irq.h b/arch/mips/include/asm/vr41xx/irq.h
index d315dfbc08f2..b07f7321751d 100644
--- a/arch/mips/include/asm/vr41xx/irq.h
+++ b/arch/mips/include/asm/vr41xx/irq.h
@@ -7,7 +7,7 @@
  * Copyright (C) 2001, 2002 Paul Mundt
  * Copyright (C) 2002 MontaVista Software, Inc.
  * Copyright (C) 2002 TimeSys Corp.
- * Copyright (C) 2003-2006 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2003-2006 Yoichi Yuasa <yuasa@linux-mips.org>
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the
diff --git a/arch/mips/include/asm/vr41xx/mpc30x.h b/arch/mips/include/asm/vr41xx/mpc30x.h
index 1d67df843dc3..130d09d8c8cb 100644
--- a/arch/mips/include/asm/vr41xx/mpc30x.h
+++ b/arch/mips/include/asm/vr41xx/mpc30x.h
@@ -1,7 +1,7 @@
 /*
  *  mpc30x.h, Include file for Victor MP-C303/304.
  *
- *  Copyright (C) 2002-2004  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2002-2004  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/include/asm/vr41xx/pci.h b/arch/mips/include/asm/vr41xx/pci.h
index 6fc01ce19777..c231a3d6cfd8 100644
--- a/arch/mips/include/asm/vr41xx/pci.h
+++ b/arch/mips/include/asm/vr41xx/pci.h
@@ -1,7 +1,7 @@
 /*
  *  Include file for NEC VR4100 series PCI Control Unit.
  *
- *  Copyright (C) 2004-2005  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2004-2005  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/include/asm/vr41xx/siu.h b/arch/mips/include/asm/vr41xx/siu.h
index da9f6e373409..ca806bc4ddc8 100644
--- a/arch/mips/include/asm/vr41xx/siu.h
+++ b/arch/mips/include/asm/vr41xx/siu.h
@@ -1,7 +1,7 @@
 /*
  *  Include file for NEC VR4100 series Serial Interface Unit.
  *
- *  Copyright (C) 2005-2008  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2005-2008  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/include/asm/vr41xx/tb0219.h b/arch/mips/include/asm/vr41xx/tb0219.h
index dc981b4be0a4..c78e8243b447 100644
--- a/arch/mips/include/asm/vr41xx/tb0219.h
+++ b/arch/mips/include/asm/vr41xx/tb0219.h
@@ -1,7 +1,7 @@
 /*
  *  tb0219.h, Include file for TANBAC TB0219.
  *
- *  Copyright (C) 2002-2004  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2002-2004  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  Modified for TANBAC TB0219:
  *  Copyright (C) 2003 Megasolution Inc.  <matsu@megasolution.jp>
diff --git a/arch/mips/include/asm/vr41xx/tb0226.h b/arch/mips/include/asm/vr41xx/tb0226.h
index de527dcfa5f3..36f5f798e416 100644
--- a/arch/mips/include/asm/vr41xx/tb0226.h
+++ b/arch/mips/include/asm/vr41xx/tb0226.h
@@ -1,7 +1,7 @@
 /*
  *  tb0226.h, Include file for TANBAC TB0226.
  *
- *  Copyright (C) 2002-2004  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2002-2004  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/include/asm/vr41xx/vr41xx.h b/arch/mips/include/asm/vr41xx/vr41xx.h
index 22be64971cc6..7b96a43b72ba 100644
--- a/arch/mips/include/asm/vr41xx/vr41xx.h
+++ b/arch/mips/include/asm/vr41xx/vr41xx.h
@@ -7,7 +7,7 @@
  * Copyright (C) 2001, 2002 Paul Mundt
  * Copyright (C) 2002 MontaVista Software, Inc.
  * Copyright (C) 2002 TimeSys Corp.
- * Copyright (C) 2003-2008 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2003-2008 Yoichi Yuasa <yuasa@linux-mips.org>
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the
diff --git a/arch/mips/kernel/binfmt_elfo32.c b/arch/mips/kernel/binfmt_elfo32.c
index e1333d7319e2..ff448233dab5 100644
--- a/arch/mips/kernel/binfmt_elfo32.c
+++ b/arch/mips/kernel/binfmt_elfo32.c
@@ -53,6 +53,23 @@ typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG];
 #define ELF_ET_DYN_BASE         (TASK32_SIZE / 3 * 2)
 
 #include <asm/processor.h>
+
+/*
+ * When this file is selected, we are definitely running a 64bit kernel.
+ * So using the right regs define in asm/reg.h
+ */
+#define WANT_COMPAT_REG_H
+
+/* These MUST be defined before elf.h gets included */
+extern void elf32_core_copy_regs(elf_gregset_t grp, struct pt_regs *regs);
+#define ELF_CORE_COPY_REGS(_dest, _regs) elf32_core_copy_regs(_dest, _regs);
+#define ELF_CORE_COPY_TASK_REGS(_tsk, _dest)				\
+({									\
+	int __res = 1;							\
+	elf32_core_copy_regs(*(_dest), task_pt_regs(_tsk));		\
+	__res;								\
+})
+
 #include <linux/module.h>
 #include <linux/elfcore.h>
 #include <linux/compat.h>
@@ -110,9 +127,6 @@ jiffies_to_compat_timeval(unsigned long jiffies, struct compat_timeval *value)
 	value->tv_usec = rem / NSEC_PER_USEC;
 }
 
-#undef ELF_CORE_COPY_REGS
-#define ELF_CORE_COPY_REGS(_dest, _regs) elf32_core_copy_regs(_dest, _regs);
-
 void elf32_core_copy_regs(elf_gregset_t grp, struct pt_regs *regs)
 {
 	int i;
diff --git a/arch/mips/kernel/cevt-ds1287.c b/arch/mips/kernel/cevt-ds1287.c
index 1ada45ea0700..6996da4d74a2 100644
--- a/arch/mips/kernel/cevt-ds1287.c
+++ b/arch/mips/kernel/cevt-ds1287.c
@@ -1,7 +1,7 @@
 /*
  *  DS1287 clockevent driver
  *
- *  Copyright (C) 2008  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2008  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/kernel/cevt-gt641xx.c b/arch/mips/kernel/cevt-gt641xx.c
index e9b787feedcb..92351e00ae0e 100644
--- a/arch/mips/kernel/cevt-gt641xx.c
+++ b/arch/mips/kernel/cevt-gt641xx.c
@@ -1,7 +1,7 @@
 /*
  *  GT641xx clockevent routines.
  *
- *  Copyright (C) 2007  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2007  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/kernel/csrc-ioasic.c b/arch/mips/kernel/csrc-ioasic.c
index b551f48d3a07..23da108506b0 100644
--- a/arch/mips/kernel/csrc-ioasic.c
+++ b/arch/mips/kernel/csrc-ioasic.c
@@ -1,7 +1,7 @@
 /*
  *  DEC I/O ASIC's counter clocksource
  *
- *  Copyright (C) 2008  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2008  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/kernel/irq-gic.c b/arch/mips/kernel/irq-gic.c
index 39000f103f2c..d2072cd38592 100644
--- a/arch/mips/kernel/irq-gic.c
+++ b/arch/mips/kernel/irq-gic.c
@@ -107,9 +107,7 @@ static unsigned int gic_irq_startup(unsigned int irq)
 {
 	pr_debug("CPU%d: %s: irq%d\n", smp_processor_id(), __func__, irq);
 	irq -= _irqbase;
-	/* FIXME: this is wrong for !GICISWORDLITTLEENDIAN */
-	GICWRITE(GIC_REG_ADDR(SHARED, (GIC_SH_SMASK_31_0_OFS + (irq / 32))),
-		 1 << (irq % 32));
+	GIC_SET_INTR_MASK(irq, 1);
 	return 0;
 }
 
@@ -120,8 +118,7 @@ static void gic_irq_ack(unsigned int irq)
 #endif
 	pr_debug("CPU%d: %s: irq%d\n", smp_processor_id(), __func__, irq);
 	irq -= _irqbase;
-	GICWRITE(GIC_REG_ADDR(SHARED, (GIC_SH_RMASK_31_0_OFS + (irq / 32))),
-		 1 << (irq % 32));
+	GIC_CLR_INTR_MASK(irq, 1);
 
 	if (_intrmap[irq].trigtype == GIC_TRIG_EDGE) {
 		if (!gic_wedgeb2bok)
@@ -138,18 +135,14 @@ static void gic_mask_irq(unsigned int irq)
 {
 	pr_debug("CPU%d: %s: irq%d\n", smp_processor_id(), __func__, irq);
 	irq -= _irqbase;
-	/* FIXME: this is wrong for !GICISWORDLITTLEENDIAN */
-	GICWRITE(GIC_REG_ADDR(SHARED, (GIC_SH_RMASK_31_0_OFS + (irq / 32))),
-		 1 << (irq % 32));
+	GIC_CLR_INTR_MASK(irq, 1);
 }
 
 static void gic_unmask_irq(unsigned int irq)
 {
 	pr_debug("CPU%d: %s: irq%d\n", smp_processor_id(), __func__, irq);
 	irq -= _irqbase;
-	/* FIXME: this is wrong for !GICISWORDLITTLEENDIAN */
-	GICWRITE(GIC_REG_ADDR(SHARED, (GIC_SH_SMASK_31_0_OFS + (irq / 32))),
-		 1 << (irq % 32));
+	GIC_SET_INTR_MASK(irq, 1);
 }
 
 #ifdef CONFIG_SMP
@@ -254,6 +247,10 @@ static void __init gic_basic_init(void)
 		if (cpu == X)
 			continue;
 
+		if (cpu == 0 && i != 0 && _intrmap[i].intrnum == 0 &&
+					_intrmap[i].ipiflag == 0)
+			continue;
+
 		setup_intr(_intrmap[i].intrnum,
 				_intrmap[i].cpunum,
 				_intrmap[i].pin,
diff --git a/arch/mips/kernel/irq-gt641xx.c b/arch/mips/kernel/irq-gt641xx.c
index 1b81b131f43c..ebcc5f7ad9c2 100644
--- a/arch/mips/kernel/irq-gt641xx.c
+++ b/arch/mips/kernel/irq-gt641xx.c
@@ -1,7 +1,7 @@
 /*
  *  GT641xx IRQ routines.
  *
- *  Copyright (C) 2007  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2007  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/kernel/scall32-o32.S b/arch/mips/kernel/scall32-o32.S
index 0b31b9bda048..20a86e08fd58 100644
--- a/arch/mips/kernel/scall32-o32.S
+++ b/arch/mips/kernel/scall32-o32.S
@@ -652,6 +652,8 @@ einval:	li	v0, -ENOSYS
 	sys	sys_inotify_init1	1
 	sys	sys_preadv		6	/* 4330 */
 	sys	sys_pwritev		6
+	sys	sys_rt_tgsigqueueinfo	4
+	sys	sys_perf_counter_open	5
 	.endm
 
 	/* We pre-compute the number of _instruction_ bytes needed to
diff --git a/arch/mips/kernel/scall64-64.S b/arch/mips/kernel/scall64-64.S
index c647fd6e722f..b046130d4c5d 100644
--- a/arch/mips/kernel/scall64-64.S
+++ b/arch/mips/kernel/scall64-64.S
@@ -489,4 +489,6 @@ sys_call_table:
 	PTR	sys_inotify_init1
 	PTR	sys_preadv
 	PTR	sys_pwritev			/* 5390 */
+	PTR	sys_rt_tgsigqueueinfo
+	PTR	sys_perf_counter_open
 	.size	sys_call_table,.-sys_call_table
diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S
index 93cc672f4522..15874f9812cc 100644
--- a/arch/mips/kernel/scall64-n32.S
+++ b/arch/mips/kernel/scall64-n32.S
@@ -415,4 +415,6 @@ EXPORT(sysn32_call_table)
 	PTR	sys_inotify_init1
 	PTR	sys_preadv
 	PTR	sys_pwritev
+	PTR	compat_sys_rt_tgsigqueueinfo	/* 5295 */
+	PTR	sys_perf_counter_open
 	.size	sysn32_call_table,.-sysn32_call_table
diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S
index a5598b2339dd..781e0f1e9533 100644
--- a/arch/mips/kernel/scall64-o32.S
+++ b/arch/mips/kernel/scall64-o32.S
@@ -535,4 +535,6 @@ sys_call_table:
 	PTR	sys_inotify_init1
 	PTR	compat_sys_preadv		/* 4330 */
 	PTR	compat_sys_pwritev
+	PTR	compat_sys_rt_tgsigqueueinfo
+	PTR	sys_perf_counter_open
 	.size	sys_call_table,.-sys_call_table
diff --git a/arch/mips/kernel/smp-cmp.c b/arch/mips/kernel/smp-cmp.c
index 653be061b9ec..ad0ff5dc4d59 100644
--- a/arch/mips/kernel/smp-cmp.c
+++ b/arch/mips/kernel/smp-cmp.c
@@ -37,80 +37,24 @@
 #include <asm/mipsregs.h>
 #include <asm/mipsmtregs.h>
 #include <asm/mips_mt.h>
-
-/*
- * Crude manipulation of the CPU masks to control which
- * which CPU's are brought online during initialisation
- *
- * Beware... this needs to be called after CPU discovery
- * but before CPU bringup
- */
-static int __init allowcpus(char *str)
-{
-	cpumask_t cpu_allow_map;
-	char buf[256];
-	int len;
-
-	cpus_clear(cpu_allow_map);
-	if (cpulist_parse(str, &cpu_allow_map) == 0) {
-		cpu_set(0, cpu_allow_map);
-		cpus_and(cpu_possible_map, cpu_possible_map, cpu_allow_map);
-		len = cpulist_scnprintf(buf, sizeof(buf)-1, &cpu_possible_map);
-		buf[len] = '\0';
-		pr_debug("Allowable CPUs: %s\n", buf);
-		return 1;
-	} else
-		return 0;
-}
-__setup("allowcpus=", allowcpus);
+#include <asm/amon.h>
+#include <asm/gic.h>
 
 static void ipi_call_function(unsigned int cpu)
 {
-	unsigned int action = 0;
-
 	pr_debug("CPU%d: %s cpu %d status %08x\n",
 		 smp_processor_id(), __func__, cpu, read_c0_status());
 
-	switch (cpu) {
-	case 0:
-		action = GIC_IPI_EXT_INTR_CALLFNC_VPE0;
-		break;
-	case 1:
-		action = GIC_IPI_EXT_INTR_CALLFNC_VPE1;
-		break;
-	case 2:
-		action = GIC_IPI_EXT_INTR_CALLFNC_VPE2;
-		break;
-	case 3:
-		action = GIC_IPI_EXT_INTR_CALLFNC_VPE3;
-		break;
-	}
-	gic_send_ipi(action);
+	gic_send_ipi(plat_ipi_call_int_xlate(cpu));
 }
 
 
 static void ipi_resched(unsigned int cpu)
 {
-	unsigned int action = 0;
-
 	pr_debug("CPU%d: %s cpu %d status %08x\n",
 		 smp_processor_id(), __func__, cpu, read_c0_status());
 
-	switch (cpu) {
-	case 0:
-		action = GIC_IPI_EXT_INTR_RESCHED_VPE0;
-		break;
-	case 1:
-		action = GIC_IPI_EXT_INTR_RESCHED_VPE1;
-		break;
-	case 2:
-		action = GIC_IPI_EXT_INTR_RESCHED_VPE2;
-		break;
-	case 3:
-		action = GIC_IPI_EXT_INTR_RESCHED_VPE3;
-		break;
-	}
-	gic_send_ipi(action);
+	gic_send_ipi(plat_ipi_resched_int_xlate(cpu));
 }
 
 /*
@@ -206,7 +150,7 @@ static void cmp_boot_secondary(int cpu, struct task_struct *idle)
 			   (unsigned long)(gp + sizeof(struct thread_info)));
 #endif
 
-	amon_cpu_start(cpu, pc, sp, gp, a0);
+	amon_cpu_start(cpu, pc, sp, (unsigned long)gp, a0);
 }
 
 /*
diff --git a/arch/mips/kernel/sync-r4k.c b/arch/mips/kernel/sync-r4k.c
index 9021108eb9c1..05dd170a83f7 100644
--- a/arch/mips/kernel/sync-r4k.c
+++ b/arch/mips/kernel/sync-r4k.c
@@ -1,7 +1,7 @@
 /*
  * Count register synchronisation.
  *
- * All CPUs will have their count registers synchronised to the CPU0 expirelo
+ * All CPUs will have their count registers synchronised to the CPU0 next time
  * value. This can cause a small timewarp for CPU0. All other CPU's should
  * not have done anything significant (but they may have had interrupts
  * enabled briefly - prom_smp_finish() should not be responsible for enabling
@@ -13,21 +13,22 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/irqflags.h>
-#include <linux/r4k-timer.h>
+#include <linux/cpumask.h>
 
+#include <asm/r4k-timer.h>
 #include <asm/atomic.h>
 #include <asm/barrier.h>
-#include <asm/cpumask.h>
 #include <asm/mipsregs.h>
 
-static atomic_t __initdata count_start_flag = ATOMIC_INIT(0);
-static atomic_t __initdata count_count_start = ATOMIC_INIT(0);
-static atomic_t __initdata count_count_stop = ATOMIC_INIT(0);
+static atomic_t __cpuinitdata count_start_flag = ATOMIC_INIT(0);
+static atomic_t __cpuinitdata count_count_start = ATOMIC_INIT(0);
+static atomic_t __cpuinitdata count_count_stop = ATOMIC_INIT(0);
+static atomic_t __cpuinitdata count_reference = ATOMIC_INIT(0);
 
 #define COUNTON	100
 #define NR_LOOPS 5
 
-void __init synchronise_count_master(void)
+void __cpuinit synchronise_count_master(void)
 {
 	int i;
 	unsigned long flags;
@@ -42,19 +43,20 @@ void __init synchronise_count_master(void)
 	return;
 #endif
 
-	pr_info("Checking COUNT synchronization across %u CPUs: ",
-		num_online_cpus());
+	printk(KERN_INFO "Synchronize counters across %u CPUs: ",
+	       num_online_cpus());
 
 	local_irq_save(flags);
 
 	/*
 	 * Notify the slaves that it's time to start
 	 */
+	atomic_set(&count_reference, read_c0_count());
 	atomic_set(&count_start_flag, 1);
 	smp_wmb();
 
-	/* Count will be initialised to expirelo for all CPU's */
-	initcount = expirelo;
+	/* Count will be initialised to current timer for all CPU's */
+	initcount = read_c0_count();
 
 	/*
 	 * We loop a few times to get a primed instruction cache,
@@ -106,7 +108,7 @@ void __init synchronise_count_master(void)
 	printk("done.\n");
 }
 
-void __init synchronise_count_slave(void)
+void __cpuinit synchronise_count_slave(void)
 {
 	int i;
 	unsigned long flags;
@@ -131,8 +133,8 @@ void __init synchronise_count_slave(void)
 	while (!atomic_read(&count_start_flag))
 		mb();
 
-	/* Count will be initialised to expirelo for all CPU's */
-	initcount = expirelo;
+	/* Count will be initialised to next expire for all CPU's */
+	initcount = atomic_read(&count_reference);
 
 	ncpus = num_online_cpus();
 	for (i = 0; i < NR_LOOPS; i++) {
@@ -156,4 +158,3 @@ void __init synchronise_count_slave(void)
 	local_irq_restore(flags);
 }
 #undef NR_LOOPS
-#endif
diff --git a/arch/mips/kernel/vpe.c b/arch/mips/kernel/vpe.c
index 3ca5f42e819d..07b9ec2c6e3d 100644
--- a/arch/mips/kernel/vpe.c
+++ b/arch/mips/kernel/vpe.c
@@ -1387,7 +1387,7 @@ static ssize_t store_ntcs(struct device *dev, struct device_attribute *attr,
 	return len;
 
 out_einval:
-	return -EINVAL;;
+	return -EINVAL;
 }
 
 static struct device_attribute vpe_class_attributes[] = {
diff --git a/arch/mips/mti-malta/malta-init.c b/arch/mips/mti-malta/malta-init.c
index 475038a141a6..27c807b67fea 100644
--- a/arch/mips/mti-malta/malta-init.c
+++ b/arch/mips/mti-malta/malta-init.c
@@ -30,6 +30,7 @@
 #include <asm/cacheflush.h>
 #include <asm/traps.h>
 
+#include <asm/gcmpregs.h>
 #include <asm/mips-boards/prom.h>
 #include <asm/mips-boards/generic.h>
 #include <asm/mips-boards/bonito64.h>
@@ -192,6 +193,8 @@ extern struct plat_smp_ops msmtc_smp_ops;
 
 void __init prom_init(void)
 {
+	int result;
+
 	prom_argc = fw_arg0;
 	_prom_argv = (int *) fw_arg1;
 	_prom_envp = (int *) fw_arg2;
@@ -358,12 +361,21 @@ void __init prom_init(void)
 #ifdef CONFIG_SERIAL_8250_CONSOLE
 	console_config();
 #endif
+	/* Early detection of CMP support */
+	result = gcmp_probe(GCMP_BASE_ADDR, GCMP_ADDRSPACE_SZ);
+
 #ifdef CONFIG_MIPS_CMP
-	register_smp_ops(&cmp_smp_ops);
+	if (result)
+		register_smp_ops(&cmp_smp_ops);
 #endif
 #ifdef CONFIG_MIPS_MT_SMP
+#ifdef CONFIG_MIPS_CMP
+	if (!result)
+		register_smp_ops(&vsmp_smp_ops);
+#else
 	register_smp_ops(&vsmp_smp_ops);
 #endif
+#endif
 #ifdef CONFIG_MIPS_MT_SMTC
 	register_smp_ops(&msmtc_smp_ops);
 #endif
diff --git a/arch/mips/mti-malta/malta-int.c b/arch/mips/mti-malta/malta-int.c
index b4eaf137e4a7..a8756f82c31b 100644
--- a/arch/mips/mti-malta/malta-int.c
+++ b/arch/mips/mti-malta/malta-int.c
@@ -331,6 +331,21 @@ static struct irqaction irq_call = {
 	.flags		= IRQF_DISABLED|IRQF_PERCPU,
 	.name		= "IPI_call"
 };
+
+static int gic_resched_int_base;
+static int gic_call_int_base;
+#define GIC_RESCHED_INT(cpu) (gic_resched_int_base+(cpu))
+#define GIC_CALL_INT(cpu) (gic_call_int_base+(cpu))
+
+unsigned int plat_ipi_call_int_xlate(unsigned int cpu)
+{
+	return GIC_CALL_INT(cpu);
+}
+
+unsigned int plat_ipi_resched_int_xlate(unsigned int cpu)
+{
+	return GIC_RESCHED_INT(cpu);
+}
 #endif /* CONFIG_MIPS_MT_SMP */
 
 static struct irqaction i8259irq = {
@@ -370,7 +385,7 @@ static int __initdata msc_nr_eicirqs = ARRAY_SIZE(msc_eicirqmap);
  * Interrupts and CPUs/Core Interrupts. The nature of the External
  * Interrupts is also defined here - polarity/trigger.
  */
-static struct gic_intr_map gic_intr_map[] = {
+static struct gic_intr_map gic_intr_map[GIC_NUM_INTRS] = {
 	{ GIC_EXT_INTR(0), 	X,	X,		X, 		X,		0 },
 	{ GIC_EXT_INTR(1), 	X,	X,		X, 		X,		0 },
 	{ GIC_EXT_INTR(2), 	X,	X,		X, 		X,		0 },
@@ -387,21 +402,14 @@ static struct gic_intr_map gic_intr_map[] = {
 	{ GIC_EXT_INTR(13), 	0,	GIC_MAP_TO_NMI_MSK,	GIC_POL_POS, GIC_TRIG_LEVEL,	0 },
 	{ GIC_EXT_INTR(14), 	0,	GIC_MAP_TO_NMI_MSK,	GIC_POL_POS, GIC_TRIG_LEVEL,	0 },
 	{ GIC_EXT_INTR(15), 	X,	X,		X, 		X,		0 },
-	{ GIC_EXT_INTR(16), 	0,	GIC_CPU_INT1,	GIC_POL_POS, GIC_TRIG_EDGE,	1 },
-	{ GIC_EXT_INTR(17), 	0,	GIC_CPU_INT2,	GIC_POL_POS, GIC_TRIG_EDGE,	1 },
-	{ GIC_EXT_INTR(18), 	1,	GIC_CPU_INT1,	GIC_POL_POS, GIC_TRIG_EDGE,	1 },
-	{ GIC_EXT_INTR(19), 	1,	GIC_CPU_INT2,	GIC_POL_POS, GIC_TRIG_EDGE,	1 },
-	{ GIC_EXT_INTR(20), 	2,	GIC_CPU_INT1,	GIC_POL_POS, GIC_TRIG_EDGE,	1 },
-	{ GIC_EXT_INTR(21), 	2,	GIC_CPU_INT2,	GIC_POL_POS, GIC_TRIG_EDGE,	1 },
-	{ GIC_EXT_INTR(22), 	3,	GIC_CPU_INT1,	GIC_POL_POS, GIC_TRIG_EDGE,	1 },
-	{ GIC_EXT_INTR(23), 	3,	GIC_CPU_INT2,	GIC_POL_POS, GIC_TRIG_EDGE,	1 },
+/* This is the end of the general interrupts now we do IPI ones */
 };
 #endif
 
 /*
  * GCMP needs to be detected before any SMP initialisation
  */
-static int __init gcmp_probe(unsigned long addr, unsigned long size)
+int __init gcmp_probe(unsigned long addr, unsigned long size)
 {
 	if (gcmp_present >= 0)
 		return gcmp_present;
@@ -416,28 +424,36 @@ static int __init gcmp_probe(unsigned long addr, unsigned long size)
 }
 
 #if defined(CONFIG_MIPS_MT_SMP)
+static void __init fill_ipi_map1(int baseintr, int cpu, int cpupin)
+{
+	int intr = baseintr + cpu;
+	gic_intr_map[intr].intrnum = GIC_EXT_INTR(intr);
+	gic_intr_map[intr].cpunum = cpu;
+	gic_intr_map[intr].pin = cpupin;
+	gic_intr_map[intr].polarity = GIC_POL_POS;
+	gic_intr_map[intr].trigtype = GIC_TRIG_EDGE;
+	gic_intr_map[intr].ipiflag = 1;
+	ipi_map[cpu] |= (1 << (cpupin + 2));
+}
+
 static void __init fill_ipi_map(void)
 {
-	int i;
+	int cpu;
 
-	for (i = 0; i < ARRAY_SIZE(gic_intr_map); i++) {
-		if (gic_intr_map[i].ipiflag && (gic_intr_map[i].cpunum != X))
-			ipi_map[gic_intr_map[i].cpunum] |=
-				(1 << (gic_intr_map[i].pin + 2));
+	for (cpu = 0; cpu < NR_CPUS; cpu++) {
+		fill_ipi_map1(gic_resched_int_base, cpu, GIC_CPU_INT1);
+		fill_ipi_map1(gic_call_int_base, cpu, GIC_CPU_INT2);
 	}
 }
 #endif
 
 void __init arch_init_irq(void)
 {
-	int gic_present, gcmp_present;
-
 	init_i8259_irqs();
 
 	if (!cpu_has_veic)
 		mips_cpu_irq_init();
 
-	gcmp_present = gcmp_probe(GCMP_BASE_ADDR, GCMP_ADDRSPACE_SZ);
 	if (gcmp_present)  {
 		GCMPGCB(GICBA) = GIC_BASE_ADDR | GCMP_GCB_GICBA_EN_MSK;
 		gic_present = 1;
@@ -514,24 +530,10 @@ void __init arch_init_irq(void)
 	if (gic_present) {
 		/* FIXME */
 		int i;
-		struct {
-			unsigned int resched;
-			unsigned int call;
-		} ipiirq[] = {
-			{
-				.resched = GIC_IPI_EXT_INTR_RESCHED_VPE0,
-				.call =  GIC_IPI_EXT_INTR_CALLFNC_VPE0},
-			{
-				.resched = GIC_IPI_EXT_INTR_RESCHED_VPE1,
-				.call =  GIC_IPI_EXT_INTR_CALLFNC_VPE1
-			}, {
-				.resched = GIC_IPI_EXT_INTR_RESCHED_VPE2,
-				.call =  GIC_IPI_EXT_INTR_CALLFNC_VPE2
-			}, {
-				.resched = GIC_IPI_EXT_INTR_RESCHED_VPE3,
-				.call =  GIC_IPI_EXT_INTR_CALLFNC_VPE3
-			}
-		};
+
+		gic_call_int_base = GIC_NUM_INTRS - NR_CPUS;
+		gic_resched_int_base = gic_call_int_base - NR_CPUS;
+
 		fill_ipi_map();
 		gic_init(GIC_BASE_ADDR, GIC_ADDRSPACE_SZ, gic_intr_map, ARRAY_SIZE(gic_intr_map), MIPS_GIC_IRQ_BASE);
 		if (!gcmp_present) {
@@ -553,12 +555,15 @@ void __init arch_init_irq(void)
 		printk("CPU%d: status register now %08x\n", smp_processor_id(), read_c0_status());
 		write_c0_status(0x1100dc00);
 		printk("CPU%d: status register frc %08x\n", smp_processor_id(), read_c0_status());
-		for (i = 0; i < ARRAY_SIZE(ipiirq); i++) {
-			setup_irq(MIPS_GIC_IRQ_BASE + ipiirq[i].resched, &irq_resched);
-			setup_irq(MIPS_GIC_IRQ_BASE + ipiirq[i].call, &irq_call);
-
-			set_irq_handler(MIPS_GIC_IRQ_BASE + ipiirq[i].resched, handle_percpu_irq);
-			set_irq_handler(MIPS_GIC_IRQ_BASE + ipiirq[i].call, handle_percpu_irq);
+		for (i = 0; i < NR_CPUS; i++) {
+			setup_irq(MIPS_GIC_IRQ_BASE +
+					GIC_RESCHED_INT(i), &irq_resched);
+			setup_irq(MIPS_GIC_IRQ_BASE +
+					GIC_CALL_INT(i), &irq_call);
+			set_irq_handler(MIPS_GIC_IRQ_BASE +
+					GIC_RESCHED_INT(i), handle_percpu_irq);
+			set_irq_handler(MIPS_GIC_IRQ_BASE +
+					GIC_CALL_INT(i), handle_percpu_irq);
 		}
 	} else {
 		/* set up ipi interrupts */
diff --git a/arch/mips/mti-malta/malta-reset.c b/arch/mips/mti-malta/malta-reset.c
index 42dee4da37ba..f48d60e84290 100644
--- a/arch/mips/mti-malta/malta-reset.c
+++ b/arch/mips/mti-malta/malta-reset.c
@@ -28,9 +28,6 @@
 #include <asm/reboot.h>
 #include <asm/mips-boards/generic.h>
 
-static void mips_machine_restart(char *command);
-static void mips_machine_halt(void);
-
 static void mips_machine_restart(char *command)
 {
 	unsigned int __iomem *softres_reg =
diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
index e8a97f59e066..63d8a297c58d 100644
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
@@ -52,3 +52,8 @@ obj-$(CONFIG_VICTOR_MPC30X)	+= fixup-mpc30x.o
 obj-$(CONFIG_ZAO_CAPCELLA)	+= fixup-capcella.o
 obj-$(CONFIG_WR_PPMC)		+= fixup-wrppmc.o
 obj-$(CONFIG_MIKROTIK_RB532)	+= pci-rc32434.o ops-rc32434.o fixup-rc32434.o
+obj-$(CONFIG_CPU_CAVIUM_OCTEON)	+= pci-octeon.o pcie-octeon.o
+
+ifdef CONFIG_PCI_MSI
+obj-$(CONFIG_CPU_CAVIUM_OCTEON)	+= msi-octeon.o
+endif
diff --git a/arch/mips/pci/fixup-capcella.c b/arch/mips/pci/fixup-capcella.c
index 1416bca6d1a3..1c02f5737367 100644
--- a/arch/mips/pci/fixup-capcella.c
+++ b/arch/mips/pci/fixup-capcella.c
@@ -1,7 +1,7 @@
 /*
  *  fixup-cappcela.c, The ZAO Networks Capcella specific PCI fixups.
  *
- *  Copyright (C) 2002,2004  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2002,2004  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/pci/fixup-mpc30x.c b/arch/mips/pci/fixup-mpc30x.c
index 591159625722..e08f49cb6875 100644
--- a/arch/mips/pci/fixup-mpc30x.c
+++ b/arch/mips/pci/fixup-mpc30x.c
@@ -1,7 +1,7 @@
 /*
  *  fixup-mpc30x.c, The Victor MP-C303/304 specific PCI fixups.
  *
- *  Copyright (C) 2002,2004  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2002,2004  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/pci/fixup-tb0219.c b/arch/mips/pci/fixup-tb0219.c
index ed87733f6796..8084b17d4406 100644
--- a/arch/mips/pci/fixup-tb0219.c
+++ b/arch/mips/pci/fixup-tb0219.c
@@ -2,7 +2,7 @@
  *  fixup-tb0219.c, The TANBAC TB0219 specific PCI fixups.
  *
  *  Copyright (C) 2003  Megasolution Inc. <matsu@megasolution.jp>
- *  Copyright (C) 2004-2005  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2004-2005  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/pci/fixup-tb0226.c b/arch/mips/pci/fixup-tb0226.c
index e3eedf4bf9bd..4196ccf3ea3d 100644
--- a/arch/mips/pci/fixup-tb0226.c
+++ b/arch/mips/pci/fixup-tb0226.c
@@ -1,7 +1,7 @@
 /*
  *  fixup-tb0226.c, The TANBAC TB0226 specific PCI fixups.
  *
- *  Copyright (C) 2002-2005  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2002-2005  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/pci/fixup-tb0287.c b/arch/mips/pci/fixup-tb0287.c
index 267ab3dc3d42..2fe29db43725 100644
--- a/arch/mips/pci/fixup-tb0287.c
+++ b/arch/mips/pci/fixup-tb0287.c
@@ -1,7 +1,7 @@
 /*
  *  fixup-tb0287.c, The TANBAC TB0287 specific PCI fixups.
  *
- *  Copyright (C) 2005  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2005  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/cavium-octeon/msi.c b/arch/mips/pci/msi-octeon.c
index 964b03b75a8f..03742e647657 100644
--- a/arch/mips/cavium-octeon/msi.c
+++ b/arch/mips/pci/msi-octeon.c
@@ -3,7 +3,7 @@
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  *
- * Copyright (C) 2005-2007 Cavium Networks
+ * Copyright (C) 2005-2009 Cavium Networks
  */
 #include <linux/kernel.h>
 #include <linux/init.h>
@@ -16,8 +16,7 @@
 #include <asm/octeon/cvmx-pci-defs.h>
 #include <asm/octeon/cvmx-npei-defs.h>
 #include <asm/octeon/cvmx-pexp-defs.h>
-
-#include "pci-common.h"
+#include <asm/octeon/pci-octeon.h>
 
 /*
  * Each bit in msi_free_irq_bitmask represents a MSI interrupt that is
@@ -47,8 +46,8 @@ static DEFINE_SPINLOCK(msi_free_irq_bitmask_lock);
  * programming the MSI control bits [6:4] before calling
  * pci_enable_msi().
  *
- * @param dev    Device requesting MSI interrupts
- * @param desc   MSI descriptor
+ * @dev:    Device requesting MSI interrupts
+ * @desc:   MSI descriptor
  *
  * Returns 0 on success.
  */
@@ -213,14 +212,9 @@ void arch_teardown_msi_irq(unsigned int irq)
 }
 
 
-/**
+/*
  * Called by the interrupt handling code when an MSI interrupt
  * occurs.
- *
- * @param cpl
- * @param dev_id
- *
- * @return
  */
 static irqreturn_t octeon_msi_interrupt(int cpl, void *dev_id)
 {
@@ -256,31 +250,37 @@ static irqreturn_t octeon_msi_interrupt(int cpl, void *dev_id)
 }
 
 
-/**
+/*
  * Initializes the MSI interrupt handling code
- *
- * @return
  */
 int octeon_msi_initialize(void)
 {
-	int r;
 	if (octeon_has_feature(OCTEON_FEATURE_PCIE)) {
-		r = request_irq(OCTEON_IRQ_PCI_MSI0, octeon_msi_interrupt,
+		if (request_irq(OCTEON_IRQ_PCI_MSI0, octeon_msi_interrupt,
 				IRQF_SHARED,
-				"MSI[0:63]", octeon_msi_interrupt);
+				"MSI[0:63]", octeon_msi_interrupt))
+			panic("request_irq(OCTEON_IRQ_PCI_MSI0) failed");
 	} else if (octeon_is_pci_host()) {
-		r = request_irq(OCTEON_IRQ_PCI_MSI0, octeon_msi_interrupt,
+		if (request_irq(OCTEON_IRQ_PCI_MSI0, octeon_msi_interrupt,
 				IRQF_SHARED,
-				"MSI[0:15]", octeon_msi_interrupt);
-		r += request_irq(OCTEON_IRQ_PCI_MSI1, octeon_msi_interrupt,
-				 IRQF_SHARED,
-				 "MSI[16:31]", octeon_msi_interrupt);
-		r += request_irq(OCTEON_IRQ_PCI_MSI2, octeon_msi_interrupt,
-				 IRQF_SHARED,
-				 "MSI[32:47]", octeon_msi_interrupt);
-		r += request_irq(OCTEON_IRQ_PCI_MSI3, octeon_msi_interrupt,
-				 IRQF_SHARED,
-				 "MSI[48:63]", octeon_msi_interrupt);
+				"MSI[0:15]", octeon_msi_interrupt))
+			panic("request_irq(OCTEON_IRQ_PCI_MSI0) failed");
+
+		if (request_irq(OCTEON_IRQ_PCI_MSI1, octeon_msi_interrupt,
+				IRQF_SHARED,
+				"MSI[16:31]", octeon_msi_interrupt))
+			panic("request_irq(OCTEON_IRQ_PCI_MSI1) failed");
+
+		if (request_irq(OCTEON_IRQ_PCI_MSI2, octeon_msi_interrupt,
+				IRQF_SHARED,
+				"MSI[32:47]", octeon_msi_interrupt))
+			panic("request_irq(OCTEON_IRQ_PCI_MSI2) failed");
+
+		if (request_irq(OCTEON_IRQ_PCI_MSI3, octeon_msi_interrupt,
+				IRQF_SHARED,
+				"MSI[48:63]", octeon_msi_interrupt))
+			panic("request_irq(OCTEON_IRQ_PCI_MSI3) failed");
+
 	}
 	return 0;
 }
diff --git a/arch/mips/pci/ops-vr41xx.c b/arch/mips/pci/ops-vr41xx.c
index 900c6b32576c..28962a7c6606 100644
--- a/arch/mips/pci/ops-vr41xx.c
+++ b/arch/mips/pci/ops-vr41xx.c
@@ -2,8 +2,8 @@
  *  ops-vr41xx.c, PCI configuration routines for the PCIU of NEC VR4100 series.
  *
  *  Copyright (C) 2001-2003 MontaVista Software Inc.
- *    Author: Yoichi Yuasa <yyuasa@mvista.com or source@mvista.com>
- *  Copyright (C) 2004-2005  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *    Author: Yoichi Yuasa <source@mvista.com>
+ *  Copyright (C) 2004-2005  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
@@ -21,7 +21,7 @@
  */
 /*
  * Changes:
- *  MontaVista Software Inc. <yyuasa@mvista.com> or <source@mvista.com>
+ *  MontaVista Software Inc. <source@mvista.com>
  *  - New creation, NEC VR4122 and VR4131 are supported.
  */
 #include <linux/pci.h>
diff --git a/arch/mips/cavium-octeon/pci.c b/arch/mips/pci/pci-octeon.c
index 67c0ff5e92f1..9cb0c807f564 100644
--- a/arch/mips/cavium-octeon/pci.c
+++ b/arch/mips/pci/pci-octeon.c
@@ -3,7 +3,7 @@
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  *
- * Copyright (C) 2005-2007 Cavium Networks
+ * Copyright (C) 2005-2009 Cavium Networks
  */
 #include <linux/kernel.h>
 #include <linux/init.h>
@@ -17,8 +17,7 @@
 #include <asm/octeon/octeon.h>
 #include <asm/octeon/cvmx-npi-defs.h>
 #include <asm/octeon/cvmx-pci-defs.h>
-
-#include "pci-common.h"
+#include <asm/octeon/pci-octeon.h>
 
 #define USE_OCTEON_INTERNAL_ARBITER
 
@@ -54,6 +53,126 @@ union octeon_pci_address {
 	} s;
 };
 
+int __initdata (*octeon_pcibios_map_irq)(const struct pci_dev *dev,
+					 u8 slot, u8 pin);
+enum octeon_dma_bar_type octeon_dma_bar_type = OCTEON_DMA_BAR_TYPE_INVALID;
+
+/**
+ * Map a PCI device to the appropriate interrupt line
+ *
+ * @dev:    The Linux PCI device structure for the device to map
+ * @slot:   The slot number for this device on __BUS 0__. Linux
+ *               enumerates through all the bridges and figures out the
+ *               slot on Bus 0 where this device eventually hooks to.
+ * @pin:    The PCI interrupt pin read from the device, then swizzled
+ *               as it goes through each bridge.
+ * Returns Interrupt number for the device
+ */
+int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+	if (octeon_pcibios_map_irq)
+		return octeon_pcibios_map_irq(dev, slot, pin);
+	else
+		panic("octeon_pcibios_map_irq not set.");
+}
+
+
+/*
+ * Called to perform platform specific PCI setup
+ */
+int pcibios_plat_dev_init(struct pci_dev *dev)
+{
+	uint16_t config;
+	uint32_t dconfig;
+	int pos;
+	/*
+	 * Force the Cache line setting to 64 bytes. The standard
+	 * Linux bus scan doesn't seem to set it. Octeon really has
+	 * 128 byte lines, but Intel bridges get really upset if you
+	 * try and set values above 64 bytes. Value is specified in
+	 * 32bit words.
+	 */
+	pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 64 / 4);
+	/* Set latency timers for all devices */
+	pci_write_config_byte(dev, PCI_LATENCY_TIMER, 48);
+
+	/* Enable reporting System errors and parity errors on all devices */
+	/* Enable parity checking and error reporting */
+	pci_read_config_word(dev, PCI_COMMAND, &config);
+	config |= PCI_COMMAND_PARITY | PCI_COMMAND_SERR;
+	pci_write_config_word(dev, PCI_COMMAND, config);
+
+	if (dev->subordinate) {
+		/* Set latency timers on sub bridges */
+		pci_write_config_byte(dev, PCI_SEC_LATENCY_TIMER, 48);
+		/* More bridge error detection */
+		pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &config);
+		config |= PCI_BRIDGE_CTL_PARITY | PCI_BRIDGE_CTL_SERR;
+		pci_write_config_word(dev, PCI_BRIDGE_CONTROL, config);
+	}
+
+	/* Enable the PCIe normal error reporting */
+	pos = pci_find_capability(dev, PCI_CAP_ID_EXP);
+	if (pos) {
+		/* Update Device Control */
+		pci_read_config_word(dev, pos + PCI_EXP_DEVCTL, &config);
+		/* Correctable Error Reporting */
+		config |= PCI_EXP_DEVCTL_CERE;
+		/* Non-Fatal Error Reporting */
+		config |= PCI_EXP_DEVCTL_NFERE;
+		/* Fatal Error Reporting */
+		config |= PCI_EXP_DEVCTL_FERE;
+		/* Unsupported Request */
+		config |= PCI_EXP_DEVCTL_URRE;
+		pci_write_config_word(dev, pos + PCI_EXP_DEVCTL, config);
+	}
+
+	/* Find the Advanced Error Reporting capability */
+	pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR);
+	if (pos) {
+		/* Clear Uncorrectable Error Status */
+		pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS,
+				      &dconfig);
+		pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS,
+				       dconfig);
+		/* Enable reporting of all uncorrectable errors */
+		/* Uncorrectable Error Mask - turned on bits disable errors */
+		pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_MASK, 0);
+		/*
+		 * Leave severity at HW default. This only controls if
+		 * errors are reported as uncorrectable or
+		 * correctable, not if the error is reported.
+		 */
+		/* PCI_ERR_UNCOR_SEVER - Uncorrectable Error Severity */
+		/* Clear Correctable Error Status */
+		pci_read_config_dword(dev, pos + PCI_ERR_COR_STATUS, &dconfig);
+		pci_write_config_dword(dev, pos + PCI_ERR_COR_STATUS, dconfig);
+		/* Enable reporting of all correctable errors */
+		/* Correctable Error Mask - turned on bits disable errors */
+		pci_write_config_dword(dev, pos + PCI_ERR_COR_MASK, 0);
+		/* Advanced Error Capabilities */
+		pci_read_config_dword(dev, pos + PCI_ERR_CAP, &dconfig);
+		/* ECRC Generation Enable */
+		if (config & PCI_ERR_CAP_ECRC_GENC)
+			config |= PCI_ERR_CAP_ECRC_GENE;
+		/* ECRC Check Enable */
+		if (config & PCI_ERR_CAP_ECRC_CHKC)
+			config |= PCI_ERR_CAP_ECRC_CHKE;
+		pci_write_config_dword(dev, pos + PCI_ERR_CAP, dconfig);
+		/* PCI_ERR_HEADER_LOG - Header Log Register (16 bytes) */
+		/* Report all errors to the root complex */
+		pci_write_config_dword(dev, pos + PCI_ERR_ROOT_COMMAND,
+				       PCI_ERR_ROOT_CMD_COR_EN |
+				       PCI_ERR_ROOT_CMD_NONFATAL_EN |
+				       PCI_ERR_ROOT_CMD_FATAL_EN);
+		/* Clear the Root status register */
+		pci_read_config_dword(dev, pos + PCI_ERR_ROOT_STATUS, &dconfig);
+		pci_write_config_dword(dev, pos + PCI_ERR_ROOT_STATUS, dconfig);
+	}
+
+	return 0;
+}
+
 /**
  * Return the mapping of PCI device number to IRQ line. Each
  * character in the return string represents the interrupt
@@ -136,9 +255,8 @@ int __init octeon_pci_pcibios_map_irq(const struct pci_dev *dev,
 }
 
 
-/**
+/*
  * Read a value from configuration space
- *
  */
 static int octeon_read_config(struct pci_bus *bus, unsigned int devfn,
 			      int reg, int size, u32 *val)
@@ -174,15 +292,8 @@ static int octeon_read_config(struct pci_bus *bus, unsigned int devfn,
 }
 
 
-/**
+/*
  * Write a value to PCI configuration space
- *
- * @bus:
- * @devfn:
- * @reg:
- * @size:
- * @val:
- * Returns
  */
 static int octeon_write_config(struct pci_bus *bus, unsigned int devfn,
 			       int reg, int size, u32 val)
@@ -251,10 +362,8 @@ static struct pci_controller octeon_pci_controller = {
 };
 
 
-/**
+/*
  * Low level initialize the Octeon PCI controller
- *
- * Returns
  */
 static void octeon_pci_initialize(void)
 {
@@ -398,7 +507,7 @@ static void octeon_pci_initialize(void)
 		pci_int_arb_cfg.s.en = 1;	/* Internal arbiter enable */
 		cvmx_write_csr(CVMX_NPI_PCI_INT_ARB_CFG, pci_int_arb_cfg.u64);
 	}
-#endif				/* USE_OCTEON_INTERNAL_ARBITER */
+#endif	/* USE_OCTEON_INTERNAL_ARBITER */
 
 	/*
 	 * Preferrably written to 1 to set MLTD. [RDSATI,TRTAE,
@@ -457,10 +566,8 @@ static void octeon_pci_initialize(void)
 }
 
 
-/**
+/*
  * Initialize the Octeon PCI controller
- *
- * Returns
  */
 static int __init octeon_pci_setup(void)
 {
diff --git a/arch/mips/pci/pci-vr41xx.c b/arch/mips/pci/pci-vr41xx.c
index d1e049b55f34..56525711f8b7 100644
--- a/arch/mips/pci/pci-vr41xx.c
+++ b/arch/mips/pci/pci-vr41xx.c
@@ -2,8 +2,8 @@
  *  pci-vr41xx.c, PCI Control Unit routines for the NEC VR4100 series.
  *
  *  Copyright (C) 2001-2003 MontaVista Software Inc.
- *    Author: Yoichi Yuasa <yyuasa@mvista.com or source@mvista.com>
- *  Copyright (C) 2004-2008  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *    Author: Yoichi Yuasa <source@mvista.com>
+ *  Copyright (C) 2004-2008  Yoichi Yuasa <yuasa@linux-mips.org>
  *  Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org)
  *
  *  This program is free software; you can redistribute it and/or modify
@@ -22,7 +22,7 @@
  */
 /*
  * Changes:
- *  MontaVista Software Inc. <yyuasa@mvista.com> or <source@mvista.com>
+ *  MontaVista Software Inc. <source@mvista.com>
  *  - New creation, NEC VR4122 and VR4131 are supported.
  */
 #include <linux/init.h>
diff --git a/arch/mips/pci/pci-vr41xx.h b/arch/mips/pci/pci-vr41xx.h
index 8a35e32b8376..6b1ae2eb1c06 100644
--- a/arch/mips/pci/pci-vr41xx.h
+++ b/arch/mips/pci/pci-vr41xx.h
@@ -2,8 +2,8 @@
  *  pci-vr41xx.h, Include file for PCI Control Unit of the NEC VR4100 series.
  *
  *  Copyright (C) 2002  MontaVista Software Inc.
- *    Author: Yoichi Yuasa <yyuasa@mvista.com or source@mvista.com>
- *  Copyright (C) 2004-2005  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *    Author: Yoichi Yuasa <source@mvista.com>
+ *  Copyright (C) 2004-2005  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/cavium-octeon/pcie.c b/arch/mips/pci/pcie-octeon.c
index 49d14081b3b5..75262247f3e4 100644
--- a/arch/mips/cavium-octeon/pcie.c
+++ b/arch/mips/pci/pcie-octeon.c
@@ -18,8 +18,7 @@
 #include <asm/octeon/cvmx-pescx-defs.h>
 #include <asm/octeon/cvmx-pexp-defs.h>
 #include <asm/octeon/cvmx-helper-errata.h>
-
-#include "pci-common.h"
+#include <asm/octeon/pci-octeon.h>
 
 union cvmx_pcie_address {
 	uint64_t u64;
@@ -976,13 +975,13 @@ static int cvmx_pcie_rc_initialize(int pcie_port)
 /**
  * Map a PCI device to the appropriate interrupt line
  *
- * @param dev    The Linux PCI device structure for the device to map
- * @param slot   The slot number for this device on __BUS 0__. Linux
+ * @dev:    The Linux PCI device structure for the device to map
+ * @slot:   The slot number for this device on __BUS 0__. Linux
  *               enumerates through all the bridges and figures out the
  *               slot on Bus 0 where this device eventually hooks to.
- * @param pin    The PCI interrupt pin read from the device, then swizzled
+ * @pin:    The PCI interrupt pin read from the device, then swizzled
  *               as it goes through each bridge.
- * @return Interrupt number for the device
+ * Returns Interrupt number for the device
  */
 int __init octeon_pcie_pcibios_map_irq(const struct pci_dev *dev,
 				       u8 slot, u8 pin)
@@ -1025,12 +1024,12 @@ int __init octeon_pcie_pcibios_map_irq(const struct pci_dev *dev,
 /**
  * Read a value from configuration space
  *
- * @param bus
- * @param devfn
- * @param reg
- * @param size
- * @param val
- * @return
+ * @bus:
+ * @devfn:
+ * @reg:
+ * @size:
+ * @val:
+ * Returns
  */
 static inline int octeon_pcie_read_config(int pcie_port, struct pci_bus *bus,
 					  unsigned int devfn, int reg, int size,
@@ -1156,12 +1155,12 @@ static int octeon_pcie1_read_config(struct pci_bus *bus, unsigned int devfn,
 /**
  * Write a value to PCI configuration space
  *
- * @param bus
- * @param devfn
- * @param reg
- * @param size
- * @param val
- * @return
+ * @bus:
+ * @devfn:
+ * @reg:
+ * @size:
+ * @val:
+ * Returns
  */
 static inline int octeon_pcie_write_config(int pcie_port, struct pci_bus *bus,
 					   unsigned int devfn, int reg,
@@ -1254,7 +1253,7 @@ static struct pci_controller octeon_pcie1_controller = {
 /**
  * Initialize the Octeon PCIe controllers
  *
- * @return
+ * Returns
  */
 static int __init octeon_pcie_setup(void)
 {
diff --git a/arch/mips/vr41xx/casio-e55/setup.c b/arch/mips/vr41xx/casio-e55/setup.c
index 6d9bab890587..719f4a5b9844 100644
--- a/arch/mips/vr41xx/casio-e55/setup.c
+++ b/arch/mips/vr41xx/casio-e55/setup.c
@@ -1,7 +1,7 @@
 /*
  *  setup.c, Setup for the CASIO CASSIOPEIA E-11/15/55/65.
  *
- *  Copyright (C) 2002-2006  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2002-2006  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/vr41xx/common/bcu.c b/arch/mips/vr41xx/common/bcu.c
index d77c330a0d59..6346c59c9f9d 100644
--- a/arch/mips/vr41xx/common/bcu.c
+++ b/arch/mips/vr41xx/common/bcu.c
@@ -2,8 +2,8 @@
  *  bcu.c, Bus Control Unit routines for the NEC VR4100 series.
  *
  *  Copyright (C) 2002  MontaVista Software Inc.
- *    Author: Yoichi Yuasa <yyuasa@mvista.com, or source@mvista.com>
- *  Copyright (C) 2003-2005  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *    Author: Yoichi Yuasa <source@mvista.com>
+ *  Copyright (C) 2003-2005  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
@@ -21,11 +21,11 @@
  */
 /*
  * Changes:
- *  MontaVista Software Inc. <yyuasa@mvista.com> or <source@mvista.com>
+ *  MontaVista Software Inc. <source@mvista.com>
  *  - New creation, NEC VR4122 and VR4131 are supported.
  *  - Added support for NEC VR4111 and VR4121.
  *
- *  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Yoichi Yuasa <yuasa@linux-mips.org>
  *  - Added support for NEC VR4133.
  */
 #include <linux/kernel.h>
diff --git a/arch/mips/vr41xx/common/cmu.c b/arch/mips/vr41xx/common/cmu.c
index ad0e8e3409d9..8ba7d04a5ec5 100644
--- a/arch/mips/vr41xx/common/cmu.c
+++ b/arch/mips/vr41xx/common/cmu.c
@@ -2,8 +2,8 @@
  *  cmu.c, Clock Mask Unit routines for the NEC VR4100 series.
  *
  *  Copyright (C) 2001-2002  MontaVista Software Inc.
- *    Author: Yoichi Yuasa <yyuasa@mvista.com or source@mvista.com>
- *  Copuright (C) 2003-2005  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *    Author: Yoichi Yuasa <source@mvista.com>
+ *  Copuright (C) 2003-2005  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
@@ -21,11 +21,11 @@
  */
 /*
  * Changes:
- *  MontaVista Software Inc. <yyuasa@mvista.com> or <source@mvista.com>
+ *  MontaVista Software Inc. <source@mvista.com>
  *  - New creation, NEC VR4122 and VR4131 are supported.
  *  - Added support for NEC VR4111 and VR4121.
  *
- *  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Yoichi Yuasa <yuasa@linux-mips.org>
  *  - Added support for NEC VR4133.
  */
 #include <linux/init.h>
diff --git a/arch/mips/vr41xx/common/giu.c b/arch/mips/vr41xx/common/giu.c
index 2b272f1496fe..22cc6f2100a1 100644
--- a/arch/mips/vr41xx/common/giu.c
+++ b/arch/mips/vr41xx/common/giu.c
@@ -1,7 +1,7 @@
 /*
  *  NEC VR4100 series GIU platform device.
  *
- *  Copyright (C) 2007  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2007  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/vr41xx/common/icu.c b/arch/mips/vr41xx/common/icu.c
index 3f23d9fda662..6d39e222b170 100644
--- a/arch/mips/vr41xx/common/icu.c
+++ b/arch/mips/vr41xx/common/icu.c
@@ -2,8 +2,8 @@
  *  icu.c, Interrupt Control Unit routines for the NEC VR4100 series.
  *
  *  Copyright (C) 2001-2002  MontaVista Software Inc.
- *    Author: Yoichi Yuasa <yyuasa@mvista.com or source@mvista.com>
- *  Copyright (C) 2003-2006  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *    Author: Yoichi Yuasa <source@mvista.com>
+ *  Copyright (C) 2003-2006  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
@@ -21,11 +21,11 @@
  */
 /*
  * Changes:
- *  MontaVista Software Inc. <yyuasa@mvista.com> or <source@mvista.com>
+ *  MontaVista Software Inc. <source@mvista.com>
  *  - New creation, NEC VR4122 and VR4131 are supported.
  *  - Added support for NEC VR4111 and VR4121.
  *
- *  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Yoichi Yuasa <yuasa@linux-mips.org>
  *  - Coped with INTASSIGN of NEC VR4133.
  */
 #include <linux/errno.h>
diff --git a/arch/mips/vr41xx/common/init.c b/arch/mips/vr41xx/common/init.c
index c64995342ba8..1386e6f081c8 100644
--- a/arch/mips/vr41xx/common/init.c
+++ b/arch/mips/vr41xx/common/init.c
@@ -1,7 +1,7 @@
 /*
  *  init.c, Common initialization routines for NEC VR4100 series.
  *
- *  Copyright (C) 2003-2008  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2003-2008  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/vr41xx/common/irq.c b/arch/mips/vr41xx/common/irq.c
index 9cc389109b19..bef06872f012 100644
--- a/arch/mips/vr41xx/common/irq.c
+++ b/arch/mips/vr41xx/common/irq.c
@@ -1,7 +1,7 @@
 /*
  *  Interrupt handing routines for NEC VR4100 series.
  *
- *  Copyright (C) 2005-2007  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2005-2007  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/vr41xx/common/pmu.c b/arch/mips/vr41xx/common/pmu.c
index 028aaf75eb21..692b4e85b7fc 100644
--- a/arch/mips/vr41xx/common/pmu.c
+++ b/arch/mips/vr41xx/common/pmu.c
@@ -1,7 +1,7 @@
 /*
  *  pmu.c, Power Management Unit routines for NEC VR4100 series.
  *
- *  Copyright (C) 2003-2007  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2003-2007  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/vr41xx/common/rtc.c b/arch/mips/vr41xx/common/rtc.c
index 9f26c14edcac..ebc5dcf0ed8e 100644
--- a/arch/mips/vr41xx/common/rtc.c
+++ b/arch/mips/vr41xx/common/rtc.c
@@ -1,7 +1,7 @@
 /*
  *  NEC VR4100 series RTC platform device.
  *
- *  Copyright (C) 2007  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2007  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/vr41xx/common/siu.c b/arch/mips/vr41xx/common/siu.c
index 654dee6208be..54eae56108fb 100644
--- a/arch/mips/vr41xx/common/siu.c
+++ b/arch/mips/vr41xx/common/siu.c
@@ -1,7 +1,7 @@
 /*
  *  NEC VR4100 series SIU platform device.
  *
- *  Copyright (C) 2007-2008  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2007-2008  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/vr41xx/common/type.c b/arch/mips/vr41xx/common/type.c
index e0c1ac5e988e..ff841422b638 100644
--- a/arch/mips/vr41xx/common/type.c
+++ b/arch/mips/vr41xx/common/type.c
@@ -1,7 +1,7 @@
 /*
  *  type.c, System type for NEC VR4100 series.
  *
- *  Copyright (C) 2005  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2005  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/vr41xx/ibm-workpad/setup.c b/arch/mips/vr41xx/ibm-workpad/setup.c
index 9eef297eca1a..3982f378a3e6 100644
--- a/arch/mips/vr41xx/ibm-workpad/setup.c
+++ b/arch/mips/vr41xx/ibm-workpad/setup.c
@@ -1,7 +1,7 @@
 /*
  *  setup.c, Setup for the IBM WorkPad z50.
  *
- *  Copyright (C) 2002-2006  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2002-2006  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mn10300/include/asm/pci.h b/arch/mn10300/include/asm/pci.h
index e58b9a46e1b1..35d2ed6396f6 100644
--- a/arch/mn10300/include/asm/pci.h
+++ b/arch/mn10300/include/asm/pci.h
@@ -70,10 +70,6 @@ struct pci_dev;
  */
 #define PCI_DMA_BUS_IS_PHYS	(1)
 
-
-/* This is always fine. */
-#define pci_dac_dma_supported(pci_dev, mask)	(0)
-
 /* Return the index of the PCI controller for device. */
 static inline int pci_controller_num(struct pci_dev *dev)
 {
diff --git a/arch/mn10300/include/asm/thread_info.h b/arch/mn10300/include/asm/thread_info.h
index 78a3881f3c12..58d64f8b2cc3 100644
--- a/arch/mn10300/include/asm/thread_info.h
+++ b/arch/mn10300/include/asm/thread_info.h
@@ -65,8 +65,6 @@ struct thread_info {
 
 /*
  * macros/functions for gaining access to the thread information structure
- *
- * preempt_count needs to be 1 initially, until the scheduler is functional.
  */
 #ifndef __ASSEMBLY__
 
@@ -76,7 +74,7 @@ struct thread_info {
 	.exec_domain	= &default_exec_domain,	\
 	.flags		= 0,			\
 	.cpu		= 0,			\
-	.preempt_count	= 1,			\
+	.preempt_count	= INIT_PREEMPT_COUNT,	\
 	.addr_limit	= KERNEL_DS,		\
 	.restart_block = {			\
 		.fn = do_no_restart_syscall,	\
diff --git a/arch/mn10300/include/asm/unistd.h b/arch/mn10300/include/asm/unistd.h
index fef5b434dadc..fad68616af32 100644
--- a/arch/mn10300/include/asm/unistd.h
+++ b/arch/mn10300/include/asm/unistd.h
@@ -346,10 +346,12 @@
 #define __NR_inotify_init1	333
 #define __NR_preadv		334
 #define __NR_pwritev		335
+#define __NR_rt_tgsigqueueinfo	336
+#define __NR_perf_counter_open	337
 
 #ifdef __KERNEL__
 
-#define NR_syscalls 326
+#define NR_syscalls 338
 
 /*
  * specify the deprecated syscalls we want to support on this arch
diff --git a/arch/mn10300/kernel/entry.S b/arch/mn10300/kernel/entry.S
index 7408a27199f3..e0d2563af4f2 100644
--- a/arch/mn10300/kernel/entry.S
+++ b/arch/mn10300/kernel/entry.S
@@ -722,6 +722,8 @@ ENTRY(sys_call_table)
 	.long sys_inotify_init1
 	.long sys_preadv
 	.long sys_pwritev		/* 335 */
+	.long sys_rt_tgsigqueueinfo
+	.long sys_perf_counter_open
 
 
 nr_syscalls=(.-sys_call_table)/4
diff --git a/arch/mn10300/kernel/traps.c b/arch/mn10300/kernel/traps.c
index 681ad8c9e4fb..0dfdc5001124 100644
--- a/arch/mn10300/kernel/traps.c
+++ b/arch/mn10300/kernel/traps.c
@@ -136,8 +136,7 @@ void show_trace(unsigned long *sp)
 	unsigned long *stack, addr, module_start, module_end;
 	int i;
 
-	printk(KERN_EMERG "\n"
-	       KERN_EMERG "Call Trace:");
+	printk(KERN_EMERG "\nCall Trace:");
 
 	stack = sp;
 	i = 0;
@@ -153,7 +152,7 @@ void show_trace(unsigned long *sp)
 			printk("\n");
 #else
 			if ((i % 6) == 0)
-				printk("\n" KERN_EMERG "  ");
+				printk(KERN_EMERG "  ");
 			printk("[<%08lx>] ", addr);
 			i++;
 #endif
@@ -180,7 +179,7 @@ void show_stack(struct task_struct *task, unsigned long *sp)
 		if (((long) stack & (THREAD_SIZE - 1)) == 0)
 			break;
 		if ((i % 8) == 0)
-			printk("\n" KERN_EMERG "  ");
+			printk(KERN_EMERG "  ");
 		printk("%08lx ", *stack++);
 	}
 
@@ -264,8 +263,7 @@ void show_registers(struct pt_regs *regs)
 		show_stack(current, (unsigned long *) sp);
 
 #if 0
-		printk(KERN_EMERG "\n"
-		       KERN_EMERG "Code: ");
+		printk(KERN_EMERG "\nCode: ");
 		if (regs->pc < PAGE_OFFSET)
 			goto bad;
 
@@ -311,16 +309,14 @@ void die(const char *str, struct pt_regs *regs, enum exception_code code)
 {
 	console_verbose();
 	spin_lock_irq(&die_lock);
-	printk(KERN_EMERG "\n"
-	       KERN_EMERG "%s: %04x\n",
+	printk(KERN_EMERG "\n%s: %04x\n",
 	       str, code & 0xffff);
 	show_registers(regs);
 
 	if (regs->pc >= 0x02000000 && regs->pc < 0x04000000 &&
 	    (regs->epsw & (EPSW_IM | EPSW_IE)) != (EPSW_IM | EPSW_IE)) {
 		printk(KERN_EMERG "Exception in usermode interrupt handler\n");
-		printk(KERN_EMERG "\n"
-		       KERN_EMERG "  Please connect to kernel debugger !!\n");
+		printk(KERN_EMERG "\nPlease connect to kernel debugger !!\n");
 		asm volatile ("0: bra 0b");
 	}
 
@@ -429,9 +425,8 @@ asmlinkage void io_bus_error(u32 bcberr, u32 bcbear, struct pt_regs *regs)
 {
 	console_verbose();
 
-	printk(KERN_EMERG "\n"
-	       KERN_EMERG "Asynchronous I/O Bus Error\n"
-	       KERN_EMERG "==========================\n");
+	printk(KERN_EMERG "Asynchronous I/O Bus Error\n");
+	printk(KERN_EMERG "==========================\n");
 
 	if (bcberr & BCBERR_BEME)
 		printk(KERN_EMERG "- Multiple recorded errors\n");
diff --git a/arch/mn10300/kernel/vmlinux.lds.S b/arch/mn10300/kernel/vmlinux.lds.S
index bcebcefb4ad7..c96ba3da95ac 100644
--- a/arch/mn10300/kernel/vmlinux.lds.S
+++ b/arch/mn10300/kernel/vmlinux.lds.S
@@ -61,7 +61,7 @@ SECTIONS
 	_edata = .;		/* End of data section */
   }
 
-  .data.init_task : { INIT_TASK(THREAD_SIZE); }
+  .data.init_task : { INIT_TASK_DATA(THREAD_SIZE); }
 
   /* might get freed after init */
   . = ALIGN(PAGE_SIZE);
diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig
index 9038f39d9d73..06f8d5b5b0f9 100644
--- a/arch/parisc/Kconfig
+++ b/arch/parisc/Kconfig
@@ -16,6 +16,8 @@ config PARISC
 	select RTC_DRV_GENERIC
 	select INIT_ALL_POSSIBLE
 	select BUG
+	select HAVE_PERF_COUNTERS
+	select GENERIC_ATOMIC64 if !64BIT
 	help
 	  The PA-RISC microprocessor is designed by Hewlett-Packard and used
 	  in many of their workstations & servers (HP9000 700 and 800 series,
diff --git a/arch/parisc/include/asm/atomic.h b/arch/parisc/include/asm/atomic.h
index 7eeaff944360..8bc9e96699b2 100644
--- a/arch/parisc/include/asm/atomic.h
+++ b/arch/parisc/include/asm/atomic.h
@@ -222,13 +222,13 @@ static __inline__ int atomic_add_unless(atomic_t *v, int a, int u)
 
 #define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
 
-#define atomic_add(i,v)	((void)(__atomic_add_return( ((int)(i)),(v))))
-#define atomic_sub(i,v)	((void)(__atomic_add_return(-((int)(i)),(v))))
+#define atomic_add(i,v)	((void)(__atomic_add_return( (i),(v))))
+#define atomic_sub(i,v)	((void)(__atomic_add_return(-(i),(v))))
 #define atomic_inc(v)	((void)(__atomic_add_return(   1,(v))))
 #define atomic_dec(v)	((void)(__atomic_add_return(  -1,(v))))
 
-#define atomic_add_return(i,v)	(__atomic_add_return( ((int)(i)),(v)))
-#define atomic_sub_return(i,v)	(__atomic_add_return(-((int)(i)),(v)))
+#define atomic_add_return(i,v)	(__atomic_add_return( (i),(v)))
+#define atomic_sub_return(i,v)	(__atomic_add_return(-(i),(v)))
 #define atomic_inc_return(v)	(__atomic_add_return(   1,(v)))
 #define atomic_dec_return(v)	(__atomic_add_return(  -1,(v)))
 
@@ -336,7 +336,11 @@ static __inline__ int atomic64_add_unless(atomic64_t *v, long a, long u)
 
 #define atomic64_inc_not_zero(v) atomic64_add_unless((v), 1, 0)
 
-#endif /* CONFIG_64BIT */
+#else /* CONFIG_64BIT */
+
+#include <asm-generic/atomic64.h>
+
+#endif /* !CONFIG_64BIT */
 
 #include <asm-generic/atomic-long.h>
 
diff --git a/arch/parisc/include/asm/dma.h b/arch/parisc/include/asm/dma.h
index 31ad0f05af3d..f7a18f968703 100644
--- a/arch/parisc/include/asm/dma.h
+++ b/arch/parisc/include/asm/dma.h
@@ -1,5 +1,4 @@
-/* $Id: dma.h,v 1.2 1999/04/27 00:46:18 deller Exp $
- * linux/include/asm/dma.h: Defines for using and allocating dma channels.
+/* asm/dma.h: Defines for using and allocating dma channels.
  * Written by Hennus Bergman, 1992.
  * High DMA channel support & info by Hannu Savolainen
  * and John Boyd, Nov. 1992.
diff --git a/arch/parisc/include/asm/perf_counter.h b/arch/parisc/include/asm/perf_counter.h
new file mode 100644
index 000000000000..dc9e829f7013
--- /dev/null
+++ b/arch/parisc/include/asm/perf_counter.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_PARISC_PERF_COUNTER_H
+#define __ASM_PARISC_PERF_COUNTER_H
+
+/* parisc only supports software counters through this interface. */
+static inline void set_perf_counter_pending(void) { }
+
+#endif /* __ASM_PARISC_PERF_COUNTER_H */
diff --git a/arch/parisc/include/asm/processor.h b/arch/parisc/include/asm/processor.h
index 9d64df8754ba..9ce66e9d1c2b 100644
--- a/arch/parisc/include/asm/processor.h
+++ b/arch/parisc/include/asm/processor.h
@@ -18,6 +18,7 @@
 #include <asm/types.h>
 #include <asm/system.h>
 #include <asm/percpu.h>
+
 #endif /* __ASSEMBLY__ */
 
 #define KERNEL_STACK_SIZE 	(4*PAGE_SIZE)
@@ -127,6 +128,8 @@ struct thread_struct {
 	unsigned long  flags;
 }; 
 
+#define task_pt_regs(tsk) ((struct pt_regs *)&((tsk)->thread.regs))
+
 /* Thread struct flags. */
 #define PARISC_UAC_NOPRINT	(1UL << 0)	/* see prctl and unaligned.c */
 #define PARISC_UAC_SIGBUS	(1UL << 1)
diff --git a/arch/parisc/include/asm/system.h b/arch/parisc/include/asm/system.h
index ee80c920b464..d91357bca5b4 100644
--- a/arch/parisc/include/asm/system.h
+++ b/arch/parisc/include/asm/system.h
@@ -168,8 +168,8 @@ static inline void set_eiem(unsigned long val)
 /* LDCW, the only atomic read-write operation PA-RISC has. *sigh*.  */
 #define __ldcw(a) ({						\
 	unsigned __ret;						\
-	__asm__ __volatile__(__LDCW " 0(%1),%0"			\
-		: "=r" (__ret) : "r" (a));			\
+	__asm__ __volatile__(__LDCW " 0(%2),%0"			\
+		: "=r" (__ret), "+m" (*(a)) : "r" (a));		\
 	__ret;							\
 })
 
diff --git a/arch/parisc/include/asm/thread_info.h b/arch/parisc/include/asm/thread_info.h
index 0407959da489..4ce0edfbe969 100644
--- a/arch/parisc/include/asm/thread_info.h
+++ b/arch/parisc/include/asm/thread_info.h
@@ -23,7 +23,7 @@ struct thread_info {
 	.flags		= 0,			\
 	.cpu		= 0,			\
 	.addr_limit	= KERNEL_DS,		\
-	.preempt_count	= 1,			\
+	.preempt_count	= INIT_PREEMPT_COUNT,	\
   	.restart_block	= {			\
 		.fn = do_no_restart_syscall	\
 	}					\
diff --git a/arch/parisc/include/asm/tlbflush.h b/arch/parisc/include/asm/tlbflush.h
index 1f6fd4fc05b9..8f1a8100bf2d 100644
--- a/arch/parisc/include/asm/tlbflush.h
+++ b/arch/parisc/include/asm/tlbflush.h
@@ -12,14 +12,12 @@
  * N class systems, only one PxTLB inter processor broadcast can be
  * active at any one time on the Merced bus.  This tlb purge
  * synchronisation is fairly lightweight and harmless so we activate
- * it on all SMP systems not just the N class.  We also need to have
- * preemption disabled on uniprocessor machines, and spin_lock does that
- * nicely.
+ * it on all systems not just the N class.
  */
 extern spinlock_t pa_tlb_lock;
 
-#define purge_tlb_start(x) spin_lock(&pa_tlb_lock)
-#define purge_tlb_end(x) spin_unlock(&pa_tlb_lock)
+#define purge_tlb_start(flags)	spin_lock_irqsave(&pa_tlb_lock, flags)
+#define purge_tlb_end(flags)	spin_unlock_irqrestore(&pa_tlb_lock, flags)
 
 extern void flush_tlb_all(void);
 extern void flush_tlb_all_local(void *);
@@ -63,14 +61,16 @@ static inline void flush_tlb_mm(struct mm_struct *mm)
 static inline void flush_tlb_page(struct vm_area_struct *vma,
 	unsigned long addr)
 {
+	unsigned long flags;
+
 	/* For one page, it's not worth testing the split_tlb variable */
 
 	mb();
 	mtsp(vma->vm_mm->context,1);
-	purge_tlb_start();
+	purge_tlb_start(flags);
 	pdtlb(addr);
 	pitlb(addr);
-	purge_tlb_end();
+	purge_tlb_end(flags);
 }
 
 void __flush_tlb_range(unsigned long sid,
diff --git a/arch/parisc/include/asm/unistd.h b/arch/parisc/include/asm/unistd.h
index ef26b009dc5d..f3d3b8b012c4 100644
--- a/arch/parisc/include/asm/unistd.h
+++ b/arch/parisc/include/asm/unistd.h
@@ -807,8 +807,12 @@
 #define __NR_dup3		(__NR_Linux + 312)
 #define __NR_pipe2		(__NR_Linux + 313)
 #define __NR_inotify_init1	(__NR_Linux + 314)
+#define __NR_preadv		(__NR_Linux + 315)
+#define __NR_pwritev		(__NR_Linux + 316)
+#define __NR_rt_tgsigqueueinfo	(__NR_Linux + 317)
+#define __NR_perf_counter_open	(__NR_Linux + 318)
 
-#define __NR_Linux_syscalls	(__NR_inotify_init1 + 1)
+#define __NR_Linux_syscalls	(__NR_perf_counter_open + 1)
 
 
 #define __IGNORE_select		/* newselect */
diff --git a/arch/parisc/kernel/cache.c b/arch/parisc/kernel/cache.c
index 837530ea32e7..b6ed34de14e1 100644
--- a/arch/parisc/kernel/cache.c
+++ b/arch/parisc/kernel/cache.c
@@ -1,5 +1,4 @@
-/* $Id: cache.c,v 1.4 2000/01/25 00:11:38 prumpf Exp $
- *
+/*
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
@@ -398,12 +397,13 @@ EXPORT_SYMBOL(flush_kernel_icache_range_asm);
 
 void clear_user_page_asm(void *page, unsigned long vaddr)
 {
+	unsigned long flags;
 	/* This function is implemented in assembly in pacache.S */
 	extern void __clear_user_page_asm(void *page, unsigned long vaddr);
 
-	purge_tlb_start();
+	purge_tlb_start(flags);
 	__clear_user_page_asm(page, vaddr);
-	purge_tlb_end();
+	purge_tlb_end(flags);
 }
 
 #define FLUSH_THRESHOLD 0x80000 /* 0.5MB */
@@ -444,20 +444,24 @@ extern void clear_user_page_asm(void *page, unsigned long vaddr);
 
 void clear_user_page(void *page, unsigned long vaddr, struct page *pg)
 {
+	unsigned long flags;
+
 	purge_kernel_dcache_page((unsigned long)page);
-	purge_tlb_start();
+	purge_tlb_start(flags);
 	pdtlb_kernel(page);
-	purge_tlb_end();
+	purge_tlb_end(flags);
 	clear_user_page_asm(page, vaddr);
 }
 EXPORT_SYMBOL(clear_user_page);
 
 void flush_kernel_dcache_page_addr(void *addr)
 {
+	unsigned long flags;
+
 	flush_kernel_dcache_page_asm(addr);
-	purge_tlb_start();
+	purge_tlb_start(flags);
 	pdtlb_kernel(addr);
-	purge_tlb_end();
+	purge_tlb_end(flags);
 }
 EXPORT_SYMBOL(flush_kernel_dcache_page_addr);
 
@@ -490,8 +494,10 @@ void __flush_tlb_range(unsigned long sid, unsigned long start,
 	if (npages >= 512)  /* 2MB of space: arbitrary, should be tuned */
 		flush_tlb_all();
 	else {
+		unsigned long flags;
+
 		mtsp(sid, 1);
-		purge_tlb_start();
+		purge_tlb_start(flags);
 		if (split_tlb) {
 			while (npages--) {
 				pdtlb(start);
@@ -504,7 +510,7 @@ void __flush_tlb_range(unsigned long sid, unsigned long start,
 				start += PAGE_SIZE;
 			}
 		}
-		purge_tlb_end();
+		purge_tlb_end(flags);
 	}
 }
 
diff --git a/arch/parisc/kernel/inventory.c b/arch/parisc/kernel/inventory.c
index bd1f7f1ff74e..d228d8237879 100644
--- a/arch/parisc/kernel/inventory.c
+++ b/arch/parisc/kernel/inventory.c
@@ -170,23 +170,27 @@ static void __init pagezero_memconfig(void)
 static int __init 
 pat_query_module(ulong pcell_loc, ulong mod_index)
 {
-	pdc_pat_cell_mod_maddr_block_t pa_pdc_cell;
+	pdc_pat_cell_mod_maddr_block_t *pa_pdc_cell;
 	unsigned long bytecnt;
 	unsigned long temp;	/* 64-bit scratch value */
 	long status;		/* PDC return value status */
 	struct parisc_device *dev;
 
+	pa_pdc_cell = kmalloc(sizeof (*pa_pdc_cell), GFP_KERNEL);
+	if (!pa_pdc_cell)
+		panic("couldn't allocate memory for PDC_PAT_CELL!");
+
 	/* return cell module (PA or Processor view) */
 	status = pdc_pat_cell_module(&bytecnt, pcell_loc, mod_index,
-				     PA_VIEW, &pa_pdc_cell);
+				     PA_VIEW, pa_pdc_cell);
 
 	if (status != PDC_OK) {
 		/* no more cell modules or error */
 		return status;
 	}
 
-	temp = pa_pdc_cell.cba;
-	dev = alloc_pa_dev(PAT_GET_CBA(temp), &pa_pdc_cell.mod_path);
+	temp = pa_pdc_cell->cba;
+	dev = alloc_pa_dev(PAT_GET_CBA(temp), &(pa_pdc_cell->mod_path));
 	if (!dev) {
 		return PDC_OK;
 	}
@@ -203,8 +207,8 @@ pat_query_module(ulong pcell_loc, ulong mod_index)
 
 	/* save generic info returned from the call */
 	/* REVISIT: who is the consumer of this? not sure yet... */
-	dev->mod_info = pa_pdc_cell.mod_info;	/* pass to PAT_GET_ENTITY() */
-	dev->pmod_loc = pa_pdc_cell.mod_location;
+	dev->mod_info = pa_pdc_cell->mod_info;	/* pass to PAT_GET_ENTITY() */
+	dev->pmod_loc = pa_pdc_cell->mod_location;
 
 	register_parisc_device(dev);	/* advertise device */
 
@@ -216,14 +220,14 @@ pat_query_module(ulong pcell_loc, ulong mod_index)
 
 	case PAT_ENTITY_PROC:
 		printk(KERN_DEBUG "PAT_ENTITY_PROC: id_eid 0x%lx\n",
-			pa_pdc_cell.mod[0]);
+			pa_pdc_cell->mod[0]);
 		break;
 
 	case PAT_ENTITY_MEM:
 		printk(KERN_DEBUG 
 			"PAT_ENTITY_MEM: amount 0x%lx min_gni_base 0x%lx min_gni_len 0x%lx\n",
-			pa_pdc_cell.mod[0], pa_pdc_cell.mod[1], 
-			pa_pdc_cell.mod[2]);
+			pa_pdc_cell->mod[0], pa_pdc_cell->mod[1],
+			pa_pdc_cell->mod[2]);
 		break;
 	case PAT_ENTITY_CA:
 		printk(KERN_DEBUG "PAT_ENTITY_CA: %ld\n", pcell_loc);
@@ -243,23 +247,26 @@ pat_query_module(ulong pcell_loc, ulong mod_index)
  print_ranges:
 		pdc_pat_cell_module(&bytecnt, pcell_loc, mod_index,
 				    IO_VIEW, &io_pdc_cell);
-		printk(KERN_DEBUG "ranges %ld\n", pa_pdc_cell.mod[1]);
-		for (i = 0; i < pa_pdc_cell.mod[1]; i++) {
+		printk(KERN_DEBUG "ranges %ld\n", pa_pdc_cell->mod[1]);
+		for (i = 0; i < pa_pdc_cell->mod[1]; i++) {
 			printk(KERN_DEBUG 
 				"  PA_VIEW %ld: 0x%016lx 0x%016lx 0x%016lx\n", 
-				i, pa_pdc_cell.mod[2 + i * 3],	/* type */
-				pa_pdc_cell.mod[3 + i * 3],	/* start */
-				pa_pdc_cell.mod[4 + i * 3]);	/* finish (ie end) */
+				i, pa_pdc_cell->mod[2 + i * 3],	/* type */
+				pa_pdc_cell->mod[3 + i * 3],	/* start */
+				pa_pdc_cell->mod[4 + i * 3]);	/* finish (ie end) */
 			printk(KERN_DEBUG 
 				"  IO_VIEW %ld: 0x%016lx 0x%016lx 0x%016lx\n", 
-				i, io_pdc_cell.mod[2 + i * 3],	/* type */
-				io_pdc_cell.mod[3 + i * 3],	/* start */
-				io_pdc_cell.mod[4 + i * 3]);	/* finish (ie end) */
+				i, io_pdc_cell->mod[2 + i * 3],	/* type */
+				io_pdc_cell->mod[3 + i * 3],	/* start */
+				io_pdc_cell->mod[4 + i * 3]);	/* finish (ie end) */
 		}
 		printk(KERN_DEBUG "\n");
 		break;
 	}
 #endif /* DEBUG_PAT */
+
+	kfree(pa_pdc_cell);
+
 	return PDC_OK;
 }
 
diff --git a/arch/parisc/kernel/irq.c b/arch/parisc/kernel/irq.c
index 8007f1e65729..330f536a9324 100644
--- a/arch/parisc/kernel/irq.c
+++ b/arch/parisc/kernel/irq.c
@@ -120,7 +120,7 @@ int cpu_check_affinity(unsigned int irq, const struct cpumask *dest)
 	if (CHECK_IRQ_PER_CPU(irq)) {
 		/* Bad linux design decision.  The mask has already
 		 * been set; we must reset it */
-		cpumask_setall(&irq_desc[irq].affinity);
+		cpumask_setall(irq_desc[irq].affinity);
 		return -EINVAL;
 	}
 
@@ -138,13 +138,13 @@ static int cpu_set_affinity_irq(unsigned int irq, const struct cpumask *dest)
 	if (cpu_dest < 0)
 		return -1;
 
-	cpumask_copy(&irq_desc[irq].affinity, dest);
+	cpumask_copy(irq_desc[irq].affinity, dest);
 
 	return 0;
 }
 #endif
 
-static struct hw_interrupt_type cpu_interrupt_type = {
+static struct irq_chip cpu_interrupt_type = {
 	.typename	= "CPU",
 	.startup	= cpu_startup_irq,
 	.shutdown	= cpu_disable_irq,
@@ -299,7 +299,7 @@ int txn_alloc_irq(unsigned int bits_wide)
 unsigned long txn_affinity_addr(unsigned int irq, int cpu)
 {
 #ifdef CONFIG_SMP
-	cpumask_copy(&irq_desc[irq].affinity, cpumask_of(cpu));
+	cpumask_copy(irq_desc[irq].affinity, cpumask_of(cpu));
 #endif
 
 	return per_cpu(cpu_data, cpu).txn_addr;
@@ -356,7 +356,7 @@ void do_cpu_irq_mask(struct pt_regs *regs)
 	irq = eirr_to_irq(eirr_val);
 
 #ifdef CONFIG_SMP
-	cpumask_copy(&dest, &irq_desc[irq].affinity);
+	cpumask_copy(&dest, irq_desc[irq].affinity);
 	if (CHECK_IRQ_PER_CPU(irq_desc[irq].status) &&
 	    !cpu_isset(smp_processor_id(), dest)) {
 		int cpu = first_cpu(dest);
diff --git a/arch/parisc/kernel/pci-dma.c b/arch/parisc/kernel/pci-dma.c
index 7d927eac932b..c07f618ff7da 100644
--- a/arch/parisc/kernel/pci-dma.c
+++ b/arch/parisc/kernel/pci-dma.c
@@ -90,12 +90,14 @@ static inline int map_pte_uncached(pte_t * pte,
 	if (end > PMD_SIZE)
 		end = PMD_SIZE;
 	do {
+		unsigned long flags;
+
 		if (!pte_none(*pte))
 			printk(KERN_ERR "map_pte_uncached: page already exists\n");
 		set_pte(pte, __mk_pte(*paddr_ptr, PAGE_KERNEL_UNC));
-		purge_tlb_start();
+		purge_tlb_start(flags);
 		pdtlb_kernel(orig_vaddr);
-		purge_tlb_end();
+		purge_tlb_end(flags);
 		vaddr += PAGE_SIZE;
 		orig_vaddr += PAGE_SIZE;
 		(*paddr_ptr) += PAGE_SIZE;
@@ -168,11 +170,13 @@ static inline void unmap_uncached_pte(pmd_t * pmd, unsigned long vaddr,
 	if (end > PMD_SIZE)
 		end = PMD_SIZE;
 	do {
+		unsigned long flags;
 		pte_t page = *pte;
+
 		pte_clear(&init_mm, vaddr, pte);
-		purge_tlb_start();
+		purge_tlb_start(flags);
 		pdtlb_kernel(orig_vaddr);
-		purge_tlb_end();
+		purge_tlb_end(flags);
 		vaddr += PAGE_SIZE;
 		orig_vaddr += PAGE_SIZE;
 		pte++;
diff --git a/arch/parisc/kernel/pci.c b/arch/parisc/kernel/pci.c
index 6936386c9861..f7064abc3bb6 100644
--- a/arch/parisc/kernel/pci.c
+++ b/arch/parisc/kernel/pci.c
@@ -1,5 +1,4 @@
-/* $Id: pci.c,v 1.6 2000/01/29 00:12:05 grundler Exp $
- *
+/*
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
diff --git a/arch/parisc/kernel/process.c b/arch/parisc/kernel/process.c
index 61c07078c072..1f3aa8db0203 100644
--- a/arch/parisc/kernel/process.c
+++ b/arch/parisc/kernel/process.c
@@ -156,7 +156,7 @@ void machine_power_off(void)
 	 * software. The user has to press the button himself. */
 
 	printk(KERN_EMERG "System shut down completed.\n"
-	       KERN_EMERG "Please power this system off now.");
+	       "Please power this system off now.");
 }
 
 void (*pm_power_off)(void) = machine_power_off;
diff --git a/arch/parisc/kernel/processor.c b/arch/parisc/kernel/processor.c
index e09d0f7fb6b0..c8fb61ed32f4 100644
--- a/arch/parisc/kernel/processor.c
+++ b/arch/parisc/kernel/processor.c
@@ -1,5 +1,4 @@
-/*    $Id: processor.c,v 1.1 2002/07/20 16:27:06 rhirst Exp $
- *
+/*
  *    Initial setup-routines for HP 9000 based hardware.
  *
  *    Copyright (C) 1991, 1992, 1995  Linus Torvalds
@@ -121,22 +120,28 @@ static int __cpuinit processor_probe(struct parisc_device *dev)
 	if (is_pdc_pat()) {
 		ulong status;
 		unsigned long bytecnt;
-	        pdc_pat_cell_mod_maddr_block_t pa_pdc_cell;
+	        pdc_pat_cell_mod_maddr_block_t *pa_pdc_cell;
 #undef USE_PAT_CPUID
 #ifdef USE_PAT_CPUID
 		struct pdc_pat_cpu_num cpu_info;
 #endif
 
+		pa_pdc_cell = kmalloc(sizeof (*pa_pdc_cell), GFP_KERNEL);
+		if (!pa_pdc_cell)
+			panic("couldn't allocate memory for PDC_PAT_CELL!");
+
 		status = pdc_pat_cell_module(&bytecnt, dev->pcell_loc,
-			dev->mod_index, PA_VIEW, &pa_pdc_cell);
+			dev->mod_index, PA_VIEW, pa_pdc_cell);
 
 		BUG_ON(PDC_OK != status);
 
 		/* verify it's the same as what do_pat_inventory() found */
-		BUG_ON(dev->mod_info != pa_pdc_cell.mod_info);
-		BUG_ON(dev->pmod_loc != pa_pdc_cell.mod_location);
+		BUG_ON(dev->mod_info != pa_pdc_cell->mod_info);
+		BUG_ON(dev->pmod_loc != pa_pdc_cell->mod_location);
+
+		txn_addr = pa_pdc_cell->mod[0];   /* id_eid for IO sapic */
 
-		txn_addr = pa_pdc_cell.mod[0];   /* id_eid for IO sapic */
+		kfree(pa_pdc_cell);
 
 #ifdef USE_PAT_CPUID
 /* We need contiguous numbers for cpuid. Firmware's notion
diff --git a/arch/parisc/kernel/setup.c b/arch/parisc/kernel/setup.c
index 82131ca8e05c..cb71f3dac995 100644
--- a/arch/parisc/kernel/setup.c
+++ b/arch/parisc/kernel/setup.c
@@ -1,5 +1,4 @@
-/*    $Id: setup.c,v 1.8 2000/02/02 04:42:38 prumpf Exp $
- *
+/*
  *    Initial setup-routines for HP 9000 based hardware.
  *
  *    Copyright (C) 1991, 1992, 1995  Linus Torvalds
diff --git a/arch/parisc/kernel/sys_parisc32.c b/arch/parisc/kernel/sys_parisc32.c
index 1adb40c81669..92a0acaa0d12 100644
--- a/arch/parisc/kernel/sys_parisc32.c
+++ b/arch/parisc/kernel/sys_parisc32.c
@@ -174,68 +174,6 @@ asmlinkage long sys32_sched_rr_get_interval(pid_t pid,
 	return ret;
 }
 
-/*** copied from mips64 ***/
-/*
- * Ooo, nasty.  We need here to frob 32-bit unsigned longs to
- * 64-bit unsigned longs.
- */
-
-static inline int
-get_fd_set32(unsigned long n, u32 *ufdset, unsigned long *fdset)
-{
-	n = (n + 8*sizeof(u32) - 1) / (8*sizeof(u32));
-	if (ufdset) {
-		unsigned long odd;
-
-		if (!access_ok(VERIFY_WRITE, ufdset, n*sizeof(u32)))
-			return -EFAULT;
-
-		odd = n & 1UL;
-		n &= ~1UL;
-		while (n) {
-			unsigned long h, l;
-			__get_user(l, ufdset);
-			__get_user(h, ufdset+1);
-			ufdset += 2;
-			*fdset++ = h << 32 | l;
-			n -= 2;
-		}
-		if (odd)
-			__get_user(*fdset, ufdset);
-	} else {
-		/* Tricky, must clear full unsigned long in the
-		 * kernel fdset at the end, this makes sure that
-		 * actually happens.
-		 */
-		memset(fdset, 0, ((n + 1) & ~1)*sizeof(u32));
-	}
-	return 0;
-}
-
-static inline void
-set_fd_set32(unsigned long n, u32 *ufdset, unsigned long *fdset)
-{
-	unsigned long odd;
-	n = (n + 8*sizeof(u32) - 1) / (8*sizeof(u32));
-
-	if (!ufdset)
-		return;
-
-	odd = n & 1UL;
-	n &= ~1UL;
-	while (n) {
-		unsigned long h, l;
-		l = *fdset++;
-		h = l >> 32;
-		__put_user(l, ufdset);
-		__put_user(h, ufdset+1);
-		ufdset += 2;
-		n -= 2;
-	}
-	if (odd)
-		__put_user(*fdset, ufdset);
-}
-
 struct msgbuf32 {
     int mtype;
     char mtext[1];
diff --git a/arch/parisc/kernel/syscall_table.S b/arch/parisc/kernel/syscall_table.S
index 03b9a01bc16c..cf145eb026b3 100644
--- a/arch/parisc/kernel/syscall_table.S
+++ b/arch/parisc/kernel/syscall_table.S
@@ -413,6 +413,10 @@
 	ENTRY_SAME(dup3)
 	ENTRY_SAME(pipe2)
 	ENTRY_SAME(inotify_init1)
+	ENTRY_COMP(preadv)		/* 315 */
+	ENTRY_COMP(pwritev)
+	ENTRY_COMP(rt_tgsigqueueinfo)
+	ENTRY_SAME(perf_counter_open)
 
 	/* Nothing yet */
 
diff --git a/arch/parisc/kernel/time.c b/arch/parisc/kernel/time.c
index d4dd05674c62..a79c6f9e7e2c 100644
--- a/arch/parisc/kernel/time.c
+++ b/arch/parisc/kernel/time.c
@@ -56,9 +56,9 @@ static unsigned long clocktick __read_mostly;	/* timer cycles per tick */
  */
 irqreturn_t __irq_entry timer_interrupt(int irq, void *dev_id)
 {
-	unsigned long now;
+	unsigned long now, now2;
 	unsigned long next_tick;
-	unsigned long cycles_elapsed, ticks_elapsed;
+	unsigned long cycles_elapsed, ticks_elapsed = 1;
 	unsigned long cycles_remainder;
 	unsigned int cpu = smp_processor_id();
 	struct cpuinfo_parisc *cpuinfo = &per_cpu(cpu_data, cpu);
@@ -71,44 +71,24 @@ irqreturn_t __irq_entry timer_interrupt(int irq, void *dev_id)
 	/* Initialize next_tick to the expected tick time. */
 	next_tick = cpuinfo->it_value;
 
-	/* Get current interval timer.
-	 * CR16 reads as 64 bits in CPU wide mode.
-	 * CR16 reads as 32 bits in CPU narrow mode.
-	 */
+	/* Get current cycle counter (Control Register 16). */
 	now = mfctl(16);
 
 	cycles_elapsed = now - next_tick;
 
-	if ((cycles_elapsed >> 5) < cpt) {
+	if ((cycles_elapsed >> 6) < cpt) {
 		/* use "cheap" math (add/subtract) instead
 		 * of the more expensive div/mul method
 		 */
 		cycles_remainder = cycles_elapsed;
-		ticks_elapsed = 1;
 		while (cycles_remainder > cpt) {
 			cycles_remainder -= cpt;
 			ticks_elapsed++;
 		}
 	} else {
+		/* TODO: Reduce this to one fdiv op */
 		cycles_remainder = cycles_elapsed % cpt;
-		ticks_elapsed = 1 + cycles_elapsed / cpt;
-	}
-
-	/* Can we differentiate between "early CR16" (aka Scenario 1) and
-	 * "long delay" (aka Scenario 3)? I don't think so.
-	 *
-	 * We expected timer_interrupt to be delivered at least a few hundred
-	 * cycles after the IT fires. But it's arbitrary how much time passes
-	 * before we call it "late". I've picked one second.
-	 */
-	if (unlikely(ticks_elapsed > HZ)) {
-		/* Scenario 3: very long delay?  bad in any case */
-		printk (KERN_CRIT "timer_interrupt(CPU %d): delayed!"
-			" cycles %lX rem %lX "
-			" next/now %lX/%lX\n",
-			cpu,
-			cycles_elapsed, cycles_remainder,
-			next_tick, now );
+		ticks_elapsed += cycles_elapsed / cpt;
 	}
 
 	/* convert from "division remainder" to "remainder of clock tick" */
@@ -122,18 +102,56 @@ irqreturn_t __irq_entry timer_interrupt(int irq, void *dev_id)
 
 	cpuinfo->it_value = next_tick;
 
-	/* Skip one clocktick on purpose if we are likely to miss next_tick.
-	 * We want to avoid the new next_tick being less than CR16.
-	 * If that happened, itimer wouldn't fire until CR16 wrapped.
-	 * We'll catch the tick we missed on the tick after that.
+	/* Program the IT when to deliver the next interrupt.
+	 * Only bottom 32-bits of next_tick are writable in CR16!
 	 */
-	if (!(cycles_remainder >> 13))
-		next_tick += cpt;
-
-	/* Program the IT when to deliver the next interrupt. */
-	/* Only bottom 32-bits of next_tick are written to cr16.  */
 	mtctl(next_tick, 16);
 
+	/* Skip one clocktick on purpose if we missed next_tick.
+	 * The new CR16 must be "later" than current CR16 otherwise
+	 * itimer would not fire until CR16 wrapped - e.g 4 seconds
+	 * later on a 1Ghz processor. We'll account for the missed
+	 * tick on the next timer interrupt.
+	 *
+	 * "next_tick - now" will always give the difference regardless
+	 * if one or the other wrapped. If "now" is "bigger" we'll end up
+	 * with a very large unsigned number.
+	 */
+	now2 = mfctl(16);
+	if (next_tick - now2 > cpt)
+		mtctl(next_tick+cpt, 16);
+
+#if 1
+/*
+ * GGG: DEBUG code for how many cycles programming CR16 used.
+ */
+	if (unlikely(now2 - now > 0x3000)) 	/* 12K cycles */
+		printk (KERN_CRIT "timer_interrupt(CPU %d): SLOW! 0x%lx cycles!"
+			" cyc %lX rem %lX "
+			" next/now %lX/%lX\n",
+			cpu, now2 - now, cycles_elapsed, cycles_remainder,
+			next_tick, now );
+#endif
+
+	/* Can we differentiate between "early CR16" (aka Scenario 1) and
+	 * "long delay" (aka Scenario 3)? I don't think so.
+	 *
+	 * Timer_interrupt will be delivered at least a few hundred cycles
+	 * after the IT fires. But it's arbitrary how much time passes
+	 * before we call it "late". I've picked one second.
+	 *
+	 * It's important NO printk's are between reading CR16 and
+	 * setting up the next value. May introduce huge variance.
+	 */
+	if (unlikely(ticks_elapsed > HZ)) {
+		/* Scenario 3: very long delay?  bad in any case */
+		printk (KERN_CRIT "timer_interrupt(CPU %d): delayed!"
+			" cycles %lX rem %lX "
+			" next/now %lX/%lX\n",
+			cpu,
+			cycles_elapsed, cycles_remainder,
+			next_tick, now );
+	}
 
 	/* Done mucking with unreliable delivery of interrupts.
 	 * Go do system house keeping.
@@ -173,7 +191,7 @@ EXPORT_SYMBOL(profile_pc);
 
 /* clock source code */
 
-static cycle_t read_cr16(void)
+static cycle_t read_cr16(struct clocksource *cs)
 {
 	return get_cycles();
 }
diff --git a/arch/parisc/kernel/traps.c b/arch/parisc/kernel/traps.c
index c32f5d6d778e..528f0ff9b273 100644
--- a/arch/parisc/kernel/traps.c
+++ b/arch/parisc/kernel/traps.c
@@ -250,15 +250,14 @@ void die_if_kernel(char *str, struct pt_regs *regs, long err)
 	oops_enter();
 
 	/* Amuse the user in a SPARC fashion */
-	if (err) printk(
-KERN_CRIT "      _______________________________ \n"
-KERN_CRIT "     < Your System ate a SPARC! Gah! >\n"
-KERN_CRIT "      ------------------------------- \n"
-KERN_CRIT "             \\   ^__^\n"
-KERN_CRIT "              \\  (xx)\\_______\n"
-KERN_CRIT "                 (__)\\       )\\/\\\n"
-KERN_CRIT "                  U  ||----w |\n"
-KERN_CRIT "                     ||     ||\n");
+	if (err) printk(KERN_CRIT
+			"      _______________________________ \n"
+			"     < Your System ate a SPARC! Gah! >\n"
+			"      ------------------------------- \n"
+			"             \\   ^__^\n"
+			"                 (__)\\       )\\/\\\n"
+			"                  U  ||----w |\n"
+			"                     ||     ||\n");
 	
 	/* unlock the pdc lock if necessary */
 	pdc_emergency_unlock();
@@ -797,7 +796,8 @@ void notrace handle_interruption(int code, struct pt_regs *regs)
 		else
 			printk(KERN_DEBUG "User Fault (long pointer) (fault %d) ",
 			       code);
-		printk("pid=%d command='%s'\n", task_pid_nr(current), current->comm);
+		printk(KERN_CONT "pid=%d command='%s'\n",
+		       task_pid_nr(current), current->comm);
 		show_regs(regs);
 #endif
 		si.si_signo = SIGSEGV;
diff --git a/arch/parisc/lib/checksum.c b/arch/parisc/lib/checksum.c
index 462696d30d3b..ae66d31f9ecf 100644
--- a/arch/parisc/lib/checksum.c
+++ b/arch/parisc/lib/checksum.c
@@ -13,8 +13,6 @@
  *		modify it under the terms of the GNU General Public License
  *		as published by the Free Software Foundation; either version
  *		2 of the License, or (at your option) any later version.
- *
- * $Id: checksum.c,v 1.3 1997/12/01 17:57:34 ralf Exp $
  */
 #include <linux/module.h>
 #include <linux/types.h>
diff --git a/arch/parisc/lib/memcpy.c b/arch/parisc/lib/memcpy.c
index bbda909c866e..abf41f4632a9 100644
--- a/arch/parisc/lib/memcpy.c
+++ b/arch/parisc/lib/memcpy.c
@@ -405,7 +405,7 @@ byte_copy:
 
 unaligned_copy:
 	/* possibly we are aligned on a word, but not on a double... */
-	if (likely(t1 & (sizeof(unsigned int)-1)) == 0) {
+	if (likely((t1 & (sizeof(unsigned int)-1)) == 0)) {
 		t2 = src & (sizeof(unsigned int) - 1);
 
 		if (unlikely(t2 != 0)) {
diff --git a/arch/parisc/math-emu/decode_exc.c b/arch/parisc/math-emu/decode_exc.c
index 66c8a9f6a27e..3ca1c6149218 100644
--- a/arch/parisc/math-emu/decode_exc.c
+++ b/arch/parisc/math-emu/decode_exc.c
@@ -40,7 +40,7 @@
  * END_DESC
 */
 
-
+#include <linux/kernel.h>
 #include "float.h"
 #include "sgl_float.h"
 #include "dbl_float.h"
diff --git a/arch/parisc/mm/fault.c b/arch/parisc/mm/fault.c
index bfb6dd6ab380..c6afbfc95770 100644
--- a/arch/parisc/mm/fault.c
+++ b/arch/parisc/mm/fault.c
@@ -1,5 +1,4 @@
-/* $Id: fault.c,v 1.5 2000/01/26 16:20:29 jsm Exp $
- *
+/*
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
diff --git a/arch/parisc/mm/init.c b/arch/parisc/mm/init.c
index 4356ceb1e366..b0831d9e35cb 100644
--- a/arch/parisc/mm/init.c
+++ b/arch/parisc/mm/init.c
@@ -370,34 +370,22 @@ static void __init setup_bootmem(void)
 
 void free_initmem(void)
 {
-	unsigned long addr, init_begin, init_end;
-
-	printk(KERN_INFO "Freeing unused kernel memory: ");
+	unsigned long addr;
+	unsigned long init_begin = (unsigned long)__init_begin;
+	unsigned long init_end = (unsigned long)__init_end;
 
 #ifdef CONFIG_DEBUG_KERNEL
 	/* Attempt to catch anyone trying to execute code here
 	 * by filling the page with BRK insns.
-	 * 
-	 * If we disable interrupts for all CPUs, then IPI stops working.
-	 * Kinda breaks the global cache flushing.
 	 */
-	local_irq_disable();
-
-	memset(__init_begin, 0x00,
-		(unsigned long)__init_end - (unsigned long)__init_begin);
-
-	flush_data_cache();
-	asm volatile("sync" : : );
-	flush_icache_range((unsigned long)__init_begin, (unsigned long)__init_end);
-	asm volatile("sync" : : );
-
-	local_irq_enable();
+	memset((void *)init_begin, 0x00, init_end - init_begin);
+	flush_icache_range(init_begin, init_end);
 #endif
 	
 	/* align __init_begin and __init_end to page size,
 	   ignoring linker script where we might have tried to save RAM */
-	init_begin = PAGE_ALIGN((unsigned long)(__init_begin));
-	init_end   = PAGE_ALIGN((unsigned long)(__init_end));
+	init_begin = PAGE_ALIGN(init_begin);
+	init_end = PAGE_ALIGN(init_end);
 	for (addr = init_begin; addr < init_end; addr += PAGE_SIZE) {
 		ClearPageReserved(virt_to_page(addr));
 		init_page_count(virt_to_page(addr));
@@ -409,7 +397,8 @@ void free_initmem(void)
 	/* set up a new led state on systems shipped LED State panel */
 	pdc_chassis_send_status(PDC_CHASSIS_DIRECT_BCOMPLETE);
 	
-	printk("%luk freed\n", (init_end - init_begin) >> 10);
+	printk(KERN_INFO "Freeing unused kernel memory: %luk freed\n",
+		(init_end - init_begin) >> 10);
 }
 
 
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index bf6cedfa05db..d00131ca0835 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -62,7 +62,6 @@ config HAVE_LATENCYTOP_SUPPORT
 
 config TRACE_IRQFLAGS_SUPPORT
 	bool
-	depends on PPC64
 	default y
 
 config LOCKDEP_SUPPORT
diff --git a/arch/powerpc/boot/.gitignore b/arch/powerpc/boot/.gitignore
index 2f50acd11a60..3d80c3e9cf60 100644
--- a/arch/powerpc/boot/.gitignore
+++ b/arch/powerpc/boot/.gitignore
@@ -36,3 +36,13 @@ zImage.pseries
 zconf.h
 zlib.h
 zutil.h
+fdt.c
+fdt.h
+fdt_ro.c
+fdt_rw.c
+fdt_strerror.c
+fdt_sw.c
+fdt_wip.c
+libfdt.h
+libfdt_internal.h
+
diff --git a/arch/powerpc/boot/dts/amigaone.dts b/arch/powerpc/boot/dts/amigaone.dts
index 26549fca2ed4..49ac36b16dd7 100644
--- a/arch/powerpc/boot/dts/amigaone.dts
+++ b/arch/powerpc/boot/dts/amigaone.dts
@@ -70,8 +70,8 @@
 			devsel-speed = <0x00000001>;
 			min-grant = <0>;
 			max-latency = <0>;
-			/* First 64k for I/O at 0x0 on PCI mapped to 0x0 on ISA. */
-			ranges = <0x00000001 0 0x01000000 0 0x00000000 0x00010000>;
+			/* First 4k for I/O at 0x0 on PCI mapped to 0x0 on ISA. */
+			ranges = <0x00000001 0 0x01000000 0 0x00000000 0x00001000>;
 			interrupt-parent = <&i8259>;
 			#interrupt-cells = <2>;
 			#address-cells = <2>;
diff --git a/arch/powerpc/boot/dts/mpc8569mds.dts b/arch/powerpc/boot/dts/mpc8569mds.dts
index a8dcb018c4a5..a680165292f2 100644
--- a/arch/powerpc/boot/dts/mpc8569mds.dts
+++ b/arch/powerpc/boot/dts/mpc8569mds.dts
@@ -253,6 +253,7 @@
 			/* Filled in by U-Boot */
 			clock-frequency = <0>;
 			status = "disabled";
+			sdhci,1-bit-only;
 		};
 
 		crypto@30000 {
diff --git a/arch/powerpc/boot/dts/warp.dts b/arch/powerpc/boot/dts/warp.dts
index 01bfb56bbe80..31605ee4afb6 100644
--- a/arch/powerpc/boot/dts/warp.dts
+++ b/arch/powerpc/boot/dts/warp.dts
@@ -261,10 +261,11 @@
 				compatible = "gpio-leds";
 				green {
 					gpios = <&GPIO1 0 0>;
-					default-state = "on";
+					default-state = "keep";
 				};
 				red {
 					gpios = <&GPIO1 1 0>;
+					default-state = "keep";
 				};
 			};
 
diff --git a/arch/powerpc/configs/44x/warp_defconfig b/arch/powerpc/configs/44x/warp_defconfig
index 3b77f092abe1..787635f23d8f 100644
--- a/arch/powerpc/configs/44x/warp_defconfig
+++ b/arch/powerpc/configs/44x/warp_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Fri Jan 23 07:57:16 2009
+# Linux kernel version: 2.6.30
+# Tue Jun  9 23:35:36 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -41,6 +41,7 @@ CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
@@ -53,10 +54,12 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 # CONFIG_DEFAULT_UIMAGE is not set
 CONFIG_PPC_DCR_NATIVE=y
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_PPC_DCR=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -74,7 +77,17 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
@@ -82,27 +95,29 @@ CONFIG_FAIR_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_HOTPLUG is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -110,10 +125,13 @@ CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
+CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -121,6 +139,7 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -133,7 +152,6 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -149,11 +167,6 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -173,10 +186,11 @@ CONFIG_WARP=y
 # CONFIG_ARCHES is not set
 # CONFIG_CANYONLANDS is not set
 # CONFIG_GLACIER is not set
+# CONFIG_REDWOOD is not set
 # CONFIG_YOSEMITE is not set
 # CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
 # CONFIG_PPC44x_SIMPLE is not set
-# CONFIG_PPC4xx_GPIO is not set
+CONFIG_PPC4xx_GPIO=y
 CONFIG_440EP=y
 CONFIG_IBM440EP_ERR42=y
 # CONFIG_IPIC is not set
@@ -235,9 +249,13 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_STDBINUTILS=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 CONFIG_CMDLINE_BOOL=y
@@ -256,6 +274,7 @@ CONFIG_PPC_PCI_CHOICE=y
 # CONFIG_PCI_DOMAINS is not set
 # CONFIG_PCI_SYSCALL is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
 # CONFIG_HAS_RAPIDIO is not set
 
 #
@@ -271,14 +290,12 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-CONFIG_CONSISTENT_START=0xff100000
 CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_NET=y
 
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -353,6 +370,7 @@ CONFIG_VLAN_8021Q=y
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -365,7 +383,6 @@ CONFIG_VLAN_8021Q=y
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 # CONFIG_WIRELESS is not set
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
@@ -378,8 +395,12 @@ CONFIG_VLAN_8021Q=y
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_STANDALONE is not set
 CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -471,13 +492,21 @@ CONFIG_MTD_NAND_NDFC=y
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
 #
-# CONFIG_MTD_UBI is not set
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+# CONFIG_MTD_UBI_GLUEBI is not set
+
+#
+# UBI debugging options
+#
+# CONFIG_MTD_UBI_DEBUG is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_GPIO=y
 CONFIG_OF_I2C=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
@@ -495,10 +524,17 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_XILINX_SYSACE is not set
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+CONFIG_EEPROM_AT24=y
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -529,7 +565,7 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
 # CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
+# CONFIG_SCSI_WAIT_SCAN is not set
 
 #
 # SCSI Transports
@@ -541,10 +577,12 @@ CONFIG_SCSI_SPI_ATTRS=y
 # CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -554,6 +592,8 @@ CONFIG_NETDEVICES=y
 # CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 CONFIG_IBM_NEW_EMAC=y
 CONFIG_IBM_NEW_EMAC_RXB=128
 CONFIG_IBM_NEW_EMAC_TXB=64
@@ -577,7 +617,6 @@ CONFIG_IBM_NEW_EMAC_ZMII=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -646,6 +685,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_NVRAM is not set
 # CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
@@ -663,6 +703,7 @@ CONFIG_I2C_HELPER_AUTO=y
 #
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
+# CONFIG_I2C_GPIO is not set
 CONFIG_I2C_IBM_IIC=y
 # CONFIG_I2C_MPC is not set
 # CONFIG_I2C_OCORES is not set
@@ -685,12 +726,9 @@ CONFIG_I2C_IBM_IIC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-CONFIG_EEPROM_AT24=y
-CONFIG_EEPROM_LEGACY=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -699,7 +737,30 @@ CONFIG_EEPROM_LEGACY=y
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+# CONFIG_GPIO_XILINX is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
@@ -721,6 +782,7 @@ CONFIG_SENSORS_AD7414=y
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -735,11 +797,15 @@ CONFIG_SENSORS_AD7414=y
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
 # CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
 # CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47M192 is not set
@@ -785,6 +851,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
@@ -870,11 +937,11 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -915,7 +982,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
@@ -929,6 +995,8 @@ CONFIG_USB_STORAGE=y
 #
 # OTG and related infrastructure
 #
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=y
 # CONFIG_MMC_DEBUG is not set
 # CONFIG_MMC_UNSAFE_RESUME is not set
@@ -946,6 +1014,7 @@ CONFIG_MMC_BLOCK_BOUNCE=y
 #
 # CONFIG_MMC_SDHCI is not set
 # CONFIG_MMC_WBSD is not set
+CONFIG_MMC_PIKASD=y
 # CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
@@ -953,16 +1022,31 @@ CONFIG_LEDS_CLASS=y
 #
 # LED drivers
 #
+CONFIG_LEDS_GPIO=y
+# CONFIG_LEDS_GPIO_PLATFORM is not set
+CONFIG_LEDS_GPIO_OF=y
+# CONFIG_LEDS_LP5521 is not set
 # CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_BD2802 is not set
 
 #
 # LED Triggers
 #
-# CONFIG_LEDS_TRIGGERS is not set
+CONFIG_LEDS_TRIGGERS=y
+# CONFIG_LEDS_TRIGGER_TIMER is not set
+# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+# CONFIG_LEDS_TRIGGER_GPIO is not set
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -973,6 +1057,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
 # CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
@@ -993,6 +1078,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -1039,6 +1129,12 @@ CONFIG_JFFS2_ZLIB=y
 # CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
+CONFIG_UBIFS_FS=y
+# CONFIG_UBIFS_FS_XATTR is not set
+# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+# CONFIG_UBIFS_FS_DEBUG is not set
 CONFIG_CRAMFS=y
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -1049,6 +1145,7 @@ CONFIG_CRAMFS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1060,7 +1157,6 @@ CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1115,6 +1211,7 @@ CONFIG_NLS_ISO8859_15=y
 # CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -1122,7 +1219,7 @@ CONFIG_NLS_UTF8=y
 CONFIG_BITREVERSE=y
 CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
+CONFIG_CRC16=y
 CONFIG_CRC_T10DIF=y
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
@@ -1130,16 +1227,19 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
 #
-# CONFIG_PRINTK_TIME is not set
+CONFIG_PRINTK_TIME=y
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
@@ -1152,11 +1252,15 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -1180,9 +1284,12 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -1190,24 +1297,27 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
 # CONFIG_XMON is not set
 CONFIG_IRQSTACKS=y
 # CONFIG_VIRQ_DEBUG is not set
-CONFIG_BDI_SWITCH=y
+# CONFIG_BDI_SWITCH is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
 #
@@ -1223,6 +1333,8 @@ CONFIG_CRYPTO=y
 # Crypto core or helper
 #
 # CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
 # CONFIG_CRYPTO_MANAGER is not set
 # CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
@@ -1294,13 +1406,15 @@ CONFIG_CRYPTO=y
 #
 # Compression
 #
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_DEFLATE=y
+# CONFIG_CRYPTO_ZLIB is not set
+CONFIG_CRYPTO_LZO=y
 
 #
 # Random Number Generation
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_PPC4XX is not set
 # CONFIG_PPC_CLOCK is not set
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/include/asm/cpm1.h b/arch/powerpc/include/asm/cpm1.h
index 2ff798744c1d..7685ffde8821 100644
--- a/arch/powerpc/include/asm/cpm1.h
+++ b/arch/powerpc/include/asm/cpm1.h
@@ -598,8 +598,6 @@ typedef struct risc_timer_pram {
 #define CICR_IEN		((uint)0x00000080)	/* Int. enable */
 #define CICR_SPS		((uint)0x00000001)	/* SCC Spread */
 
-#define IMAP_ADDR		(get_immrbase())
-
 #define CPM_PIN_INPUT     0
 #define CPM_PIN_OUTPUT    1
 #define CPM_PIN_PRIMARY   0
diff --git a/arch/powerpc/include/asm/delay.h b/arch/powerpc/include/asm/delay.h
index 1e2eb41fa057..52e4d54da2a9 100644
--- a/arch/powerpc/include/asm/delay.h
+++ b/arch/powerpc/include/asm/delay.h
@@ -63,6 +63,8 @@ extern void udelay(unsigned long usecs);
 			udelay(delay);                                         \
 		else                                                           \
 			cpu_relax();                                           \
+	if (!__ret)                                                            \
+		__ret = (condition);                                           \
 	__ret;		                                                       \
 })
 
diff --git a/arch/powerpc/include/asm/dma-mapping.h b/arch/powerpc/include/asm/dma-mapping.h
index 3d9e887c3c0c..b44aaabdd1a6 100644
--- a/arch/powerpc/include/asm/dma-mapping.h
+++ b/arch/powerpc/include/asm/dma-mapping.h
@@ -309,7 +309,9 @@ static inline void dma_sync_single_for_cpu(struct device *dev,
 	struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
 
 	BUG_ON(!dma_ops);
-	dma_ops->sync_single_range_for_cpu(dev, dma_handle, 0,
+
+	if (dma_ops->sync_single_range_for_cpu)
+		dma_ops->sync_single_range_for_cpu(dev, dma_handle, 0,
 					   size, direction);
 }
 
@@ -320,7 +322,9 @@ static inline void dma_sync_single_for_device(struct device *dev,
 	struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
 
 	BUG_ON(!dma_ops);
-	dma_ops->sync_single_range_for_device(dev, dma_handle,
+
+	if (dma_ops->sync_single_range_for_device)
+		dma_ops->sync_single_range_for_device(dev, dma_handle,
 					      0, size, direction);
 }
 
@@ -331,7 +335,9 @@ static inline void dma_sync_sg_for_cpu(struct device *dev,
 	struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
 
 	BUG_ON(!dma_ops);
-	dma_ops->sync_sg_for_cpu(dev, sgl, nents, direction);
+
+	if (dma_ops->sync_sg_for_cpu)
+		dma_ops->sync_sg_for_cpu(dev, sgl, nents, direction);
 }
 
 static inline void dma_sync_sg_for_device(struct device *dev,
@@ -341,7 +347,9 @@ static inline void dma_sync_sg_for_device(struct device *dev,
 	struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
 
 	BUG_ON(!dma_ops);
-	dma_ops->sync_sg_for_device(dev, sgl, nents, direction);
+
+	if (dma_ops->sync_sg_for_device)
+		dma_ops->sync_sg_for_device(dev, sgl, nents, direction);
 }
 
 static inline void dma_sync_single_range_for_cpu(struct device *dev,
@@ -351,7 +359,9 @@ static inline void dma_sync_single_range_for_cpu(struct device *dev,
 	struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
 
 	BUG_ON(!dma_ops);
-	dma_ops->sync_single_range_for_cpu(dev, dma_handle,
+
+	if (dma_ops->sync_single_range_for_cpu)
+		dma_ops->sync_single_range_for_cpu(dev, dma_handle,
 					   offset, size, direction);
 }
 
@@ -362,7 +372,9 @@ static inline void dma_sync_single_range_for_device(struct device *dev,
 	struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
 
 	BUG_ON(!dma_ops);
-	dma_ops->sync_single_range_for_device(dev, dma_handle, offset,
+
+	if (dma_ops->sync_single_range_for_device)
+		dma_ops->sync_single_range_for_device(dev, dma_handle, offset,
 					      size, direction);
 }
 #else /* CONFIG_PPC_NEED_DMA_SYNC_OPS */
diff --git a/arch/powerpc/include/asm/highmem.h b/arch/powerpc/include/asm/highmem.h
index 684a73f4324f..a74c4ee6c020 100644
--- a/arch/powerpc/include/asm/highmem.h
+++ b/arch/powerpc/include/asm/highmem.h
@@ -22,9 +22,7 @@
 
 #ifdef __KERNEL__
 
-#include <linux/init.h>
 #include <linux/interrupt.h>
-#include <linux/highmem.h>
 #include <asm/kmap_types.h>
 #include <asm/tlbflush.h>
 #include <asm/page.h>
@@ -62,6 +60,9 @@ extern pte_t *pkmap_page_table;
 
 extern void *kmap_high(struct page *page);
 extern void kunmap_high(struct page *page);
+extern void *kmap_atomic_prot(struct page *page, enum km_type type,
+			      pgprot_t prot);
+extern void kunmap_atomic(void *kvaddr, enum km_type type);
 
 static inline void *kmap(struct page *page)
 {
@@ -79,62 +80,11 @@ static inline void kunmap(struct page *page)
 	kunmap_high(page);
 }
 
-/*
- * The use of kmap_atomic/kunmap_atomic is discouraged - kmap/kunmap
- * gives a more generic (and caching) interface. But kmap_atomic can
- * be used in IRQ contexts, so in some (very limited) cases we need
- * it.
- */
-static inline void *kmap_atomic_prot(struct page *page, enum km_type type, pgprot_t prot)
-{
-	unsigned int idx;
-	unsigned long vaddr;
-
-	/* even !CONFIG_PREEMPT needs this, for in_atomic in do_page_fault */
-	pagefault_disable();
-	if (!PageHighMem(page))
-		return page_address(page);
-
-	debug_kmap_atomic(type);
-	idx = type + KM_TYPE_NR*smp_processor_id();
-	vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
-#ifdef CONFIG_DEBUG_HIGHMEM
-	BUG_ON(!pte_none(*(kmap_pte-idx)));
-#endif
-	__set_pte_at(&init_mm, vaddr, kmap_pte-idx, mk_pte(page, prot), 1);
-	local_flush_tlb_page(NULL, vaddr);
-
-	return (void*) vaddr;
-}
-
 static inline void *kmap_atomic(struct page *page, enum km_type type)
 {
 	return kmap_atomic_prot(page, type, kmap_prot);
 }
 
-static inline void kunmap_atomic(void *kvaddr, enum km_type type)
-{
-#ifdef CONFIG_DEBUG_HIGHMEM
-	unsigned long vaddr = (unsigned long) kvaddr & PAGE_MASK;
-	enum fixed_addresses idx = type + KM_TYPE_NR*smp_processor_id();
-
-	if (vaddr < __fix_to_virt(FIX_KMAP_END)) {
-		pagefault_enable();
-		return;
-	}
-
-	BUG_ON(vaddr != __fix_to_virt(FIX_KMAP_BEGIN + idx));
-
-	/*
-	 * force other mappings to Oops if they'll try to access
-	 * this pte without first remap it
-	 */
-	pte_clear(&init_mm, vaddr, kmap_pte-idx);
-	local_flush_tlb_page(NULL, vaddr);
-#endif
-	pagefault_enable();
-}
-
 static inline struct page *kmap_atomic_to_page(void *ptr)
 {
 	unsigned long idx, vaddr = (unsigned long) ptr;
@@ -148,6 +98,7 @@ static inline struct page *kmap_atomic_to_page(void *ptr)
 	return pte_page(*pte);
 }
 
+
 #define flush_cache_kmaps()	flush_cache_all()
 
 #endif /* __KERNEL__ */
diff --git a/arch/powerpc/include/asm/hw_irq.h b/arch/powerpc/include/asm/hw_irq.h
index 867ab8ed69b3..8b505eaaa38a 100644
--- a/arch/powerpc/include/asm/hw_irq.h
+++ b/arch/powerpc/include/asm/hw_irq.h
@@ -68,13 +68,13 @@ static inline int irqs_disabled_flags(unsigned long flags)
 
 #if defined(CONFIG_BOOKE)
 #define SET_MSR_EE(x)	mtmsr(x)
-#define local_irq_restore(flags)	__asm__ __volatile__("wrtee %0" : : "r" (flags) : "memory")
+#define raw_local_irq_restore(flags)	__asm__ __volatile__("wrtee %0" : : "r" (flags) : "memory")
 #else
 #define SET_MSR_EE(x)	mtmsr(x)
-#define local_irq_restore(flags)	mtmsr(flags)
+#define raw_local_irq_restore(flags)	mtmsr(flags)
 #endif
 
-static inline void local_irq_disable(void)
+static inline void raw_local_irq_disable(void)
 {
 #ifdef CONFIG_BOOKE
 	__asm__ __volatile__("wrteei 0": : :"memory");
@@ -86,7 +86,7 @@ static inline void local_irq_disable(void)
 #endif
 }
 
-static inline void local_irq_enable(void)
+static inline void raw_local_irq_enable(void)
 {
 #ifdef CONFIG_BOOKE
 	__asm__ __volatile__("wrteei 1": : :"memory");
@@ -98,7 +98,7 @@ static inline void local_irq_enable(void)
 #endif
 }
 
-static inline void local_irq_save_ptr(unsigned long *flags)
+static inline void raw_local_irq_save_ptr(unsigned long *flags)
 {
 	unsigned long msr;
 	msr = mfmsr();
@@ -110,12 +110,12 @@ static inline void local_irq_save_ptr(unsigned long *flags)
 #endif
 }
 
-#define local_save_flags(flags)	((flags) = mfmsr())
-#define local_irq_save(flags)	local_irq_save_ptr(&flags)
-#define irqs_disabled()		((mfmsr() & MSR_EE) == 0)
+#define raw_local_save_flags(flags)	((flags) = mfmsr())
+#define raw_local_irq_save(flags)	raw_local_irq_save_ptr(&flags)
+#define raw_irqs_disabled()		((mfmsr() & MSR_EE) == 0)
+#define raw_irqs_disabled_flags(flags)	(((flags) & MSR_EE) == 0)
 
-#define hard_irq_enable()	local_irq_enable()
-#define hard_irq_disable()	local_irq_disable()
+#define hard_irq_disable()		raw_local_irq_disable()
 
 static inline int irqs_disabled_flags(unsigned long flags)
 {
diff --git a/arch/powerpc/include/asm/perf_counter.h b/arch/powerpc/include/asm/perf_counter.h
index 8ccd4e155768..0ea0639fcf75 100644
--- a/arch/powerpc/include/asm/perf_counter.h
+++ b/arch/powerpc/include/asm/perf_counter.h
@@ -61,6 +61,8 @@ struct pt_regs;
 extern unsigned long perf_misc_flags(struct pt_regs *regs);
 extern unsigned long perf_instruction_pointer(struct pt_regs *regs);
 
+#define PERF_COUNTER_INDEX_OFFSET	1
+
 /*
  * Only override the default definitions in include/linux/perf_counter.h
  * if we have hardware PMU support.
diff --git a/arch/powerpc/include/asm/pte-hash64-64k.h b/arch/powerpc/include/asm/pte-hash64-64k.h
index e05d26fa372f..82b72207c51c 100644
--- a/arch/powerpc/include/asm/pte-hash64-64k.h
+++ b/arch/powerpc/include/asm/pte-hash64-64k.h
@@ -47,7 +47,8 @@
  * generic accessors and iterators here
  */
 #define __real_pte(e,p) 	((real_pte_t) { \
-	(e), pte_val(*((p) + PTRS_PER_PTE)) })
+			(e), ((e) & _PAGE_COMBO) ? \
+				(pte_val(*((p) + PTRS_PER_PTE))) : 0 })
 #define __rpte_to_hidx(r,index)	((pte_val((r).pte) & _PAGE_COMBO) ? \
         (((r).hidx >> ((index)<<2)) & 0xf) : ((pte_val((r).pte) >> 12) & 0xf))
 #define __rpte_to_pte(r)	((r).pte)
diff --git a/arch/powerpc/include/asm/rtas.h b/arch/powerpc/include/asm/rtas.h
index 01c12339b304..168fce726201 100644
--- a/arch/powerpc/include/asm/rtas.h
+++ b/arch/powerpc/include/asm/rtas.h
@@ -58,7 +58,7 @@ struct rtas_t {
 	unsigned long entry;		/* physical address pointer */
 	unsigned long base;		/* physical address pointer */
 	unsigned long size;
-	spinlock_t lock;
+	raw_spinlock_t lock;
 	struct rtas_args args;
 	struct device_node *dev;	/* virtual address pointer */
 };
@@ -245,5 +245,8 @@ static inline u32 rtas_config_addr(int busno, int devfn, int reg)
 			(devfn << 8) | (reg & 0xff);
 }
 
+extern void __cpuinit rtas_give_timebase(void);
+extern void __cpuinit rtas_take_timebase(void);
+
 #endif /* __KERNEL__ */
 #endif /* _POWERPC_RTAS_H */
diff --git a/arch/powerpc/include/asm/thread_info.h b/arch/powerpc/include/asm/thread_info.h
index 9aba5a38a7c4..c8b329255678 100644
--- a/arch/powerpc/include/asm/thread_info.h
+++ b/arch/powerpc/include/asm/thread_info.h
@@ -46,15 +46,13 @@ struct thread_info {
 
 /*
  * macros/functions for gaining access to the thread information structure
- *
- * preempt_count needs to be 1 initially, until the scheduler is functional.
  */
 #define INIT_THREAD_INFO(tsk)			\
 {						\
 	.task =		&tsk,			\
 	.exec_domain =	&default_exec_domain,	\
 	.cpu =		0,			\
-	.preempt_count = 1,			\
+	.preempt_count = INIT_PREEMPT_COUNT,	\
 	.restart_block = {			\
 		.fn = do_no_restart_syscall,	\
 	},					\
diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S
index 4dd38f129153..3cadba60a4b6 100644
--- a/arch/powerpc/kernel/entry_32.S
+++ b/arch/powerpc/kernel/entry_32.S
@@ -191,11 +191,49 @@ transfer_to_handler_cont:
 	mflr	r9
 	lwz	r11,0(r9)		/* virtual address of handler */
 	lwz	r9,4(r9)		/* where to go when done */
+#ifdef CONFIG_TRACE_IRQFLAGS
+	lis	r12,reenable_mmu@h
+	ori	r12,r12,reenable_mmu@l
+	mtspr	SPRN_SRR0,r12
+	mtspr	SPRN_SRR1,r10
+	SYNC
+	RFI
+reenable_mmu:				/* re-enable mmu so we can */
+	mfmsr	r10
+	lwz	r12,_MSR(r1)
+	xor	r10,r10,r12
+	andi.	r10,r10,MSR_EE		/* Did EE change? */
+	beq	1f
+
+	/* Save handler and return address into the 2 unused words
+	 * of the STACK_FRAME_OVERHEAD (sneak sneak sneak). Everything
+	 * else can be recovered from the pt_regs except r3 which for
+	 * normal interrupts has been set to pt_regs and for syscalls
+	 * is an argument, so we temporarily use ORIG_GPR3 to save it
+	 */
+	stw	r9,8(r1)
+	stw	r11,12(r1)
+	stw	r3,ORIG_GPR3(r1)
+	bl	trace_hardirqs_off
+	lwz	r0,GPR0(r1)
+	lwz	r3,ORIG_GPR3(r1)
+	lwz	r4,GPR4(r1)
+	lwz	r5,GPR5(r1)
+	lwz	r6,GPR6(r1)
+	lwz	r7,GPR7(r1)
+	lwz	r8,GPR8(r1)
+	lwz	r9,8(r1)
+	lwz	r11,12(r1)
+1:	mtctr	r11
+	mtlr	r9
+	bctr				/* jump to handler */
+#else /* CONFIG_TRACE_IRQFLAGS */
 	mtspr	SPRN_SRR0,r11
 	mtspr	SPRN_SRR1,r10
 	mtlr	r9
 	SYNC
 	RFI				/* jump to handler, enable MMU */
+#endif /* CONFIG_TRACE_IRQFLAGS */
 
 #if defined (CONFIG_6xx) || defined(CONFIG_E500)
 4:	rlwinm	r12,r12,0,~_TLF_NAPPING
@@ -251,6 +289,31 @@ _GLOBAL(DoSyscall)
 #ifdef SHOW_SYSCALLS
 	bl	do_show_syscall
 #endif /* SHOW_SYSCALLS */
+#ifdef CONFIG_TRACE_IRQFLAGS
+	/* Return from syscalls can (and generally will) hard enable
+	 * interrupts. You aren't supposed to call a syscall with
+	 * interrupts disabled in the first place. However, to ensure
+	 * that we get it right vs. lockdep if it happens, we force
+	 * that hard enable here with appropriate tracing if we see
+	 * that we have been called with interrupts off
+	 */
+	mfmsr	r11
+	andi.	r12,r11,MSR_EE
+	bne+	1f
+	/* We came in with interrupts disabled, we enable them now */
+	bl	trace_hardirqs_on
+	mfmsr	r11
+	lwz	r0,GPR0(r1)
+	lwz	r3,GPR3(r1)
+	lwz	r4,GPR4(r1)
+	ori	r11,r11,MSR_EE
+	lwz	r5,GPR5(r1)
+	lwz	r6,GPR6(r1)
+	lwz	r7,GPR7(r1)
+	lwz	r8,GPR8(r1)
+	mtmsr	r11
+1:
+#endif /* CONFIG_TRACE_IRQFLAGS */
 	rlwinm	r10,r1,0,0,(31-THREAD_SHIFT)	/* current_thread_info() */
 	lwz	r11,TI_FLAGS(r10)
 	andi.	r11,r11,_TIF_SYSCALL_T_OR_A
@@ -275,6 +338,7 @@ ret_from_syscall:
 	rlwinm	r12,r1,0,0,(31-THREAD_SHIFT)	/* current_thread_info() */
 	/* disable interrupts so current_thread_info()->flags can't change */
 	LOAD_MSR_KERNEL(r10,MSR_KERNEL)	/* doesn't include MSR_EE */
+	/* Note: We don't bother telling lockdep about it */
 	SYNC
 	MTMSRD(r10)
 	lwz	r9,TI_FLAGS(r12)
@@ -288,6 +352,19 @@ ret_from_syscall:
 	oris	r11,r11,0x1000	/* Set SO bit in CR */
 	stw	r11,_CCR(r1)
 syscall_exit_cont:
+	lwz	r8,_MSR(r1)
+#ifdef CONFIG_TRACE_IRQFLAGS
+	/* If we are going to return from the syscall with interrupts
+	 * off, we trace that here. It shouldn't happen though but we
+	 * want to catch the bugger if it does right ?
+	 */
+	andi.	r10,r8,MSR_EE
+	bne+	1f
+	stw	r3,GPR3(r1)
+	bl      trace_hardirqs_off
+	lwz	r3,GPR3(r1)
+1:
+#endif /* CONFIG_TRACE_IRQFLAGS */
 #if defined(CONFIG_4xx) || defined(CONFIG_BOOKE)
 	/* If the process has its own DBCR0 value, load it up.  The internal
 	   debug mode bit tells us that dbcr0 should be loaded. */
@@ -311,7 +388,6 @@ END_FTR_SECTION_IFSET(CPU_FTR_NEED_PAIRED_STWCX)
 	mtlr	r4
 	mtcr	r5
 	lwz	r7,_NIP(r1)
-	lwz	r8,_MSR(r1)
 	FIX_SRR1(r8, r0)
 	lwz	r2,GPR2(r1)
 	lwz	r1,GPR1(r1)
@@ -394,7 +470,9 @@ syscall_exit_work:
 	andi.	r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP)
 	beq	ret_from_except
 
-	/* Re-enable interrupts */
+	/* Re-enable interrupts. There is no need to trace that with
+	 * lockdep as we are supposed to have IRQs on at this point
+	 */
 	ori	r10,r10,MSR_EE
 	SYNC
 	MTMSRD(r10)
@@ -705,6 +783,7 @@ ret_from_except:
 	/* Hard-disable interrupts so that current_thread_info()->flags
 	 * can't change between when we test it and when we return
 	 * from the interrupt. */
+	/* Note: We don't bother telling lockdep about it */
 	LOAD_MSR_KERNEL(r10,MSR_KERNEL)
 	SYNC			/* Some chip revs have problems here... */
 	MTMSRD(r10)		/* disable interrupts */
@@ -744,11 +823,24 @@ resume_kernel:
 	beq+	restore
 	andi.	r0,r3,MSR_EE	/* interrupts off? */
 	beq	restore		/* don't schedule if so */
+#ifdef CONFIG_TRACE_IRQFLAGS
+	/* Lockdep thinks irqs are enabled, we need to call
+	 * preempt_schedule_irq with IRQs off, so we inform lockdep
+	 * now that we -did- turn them off already
+	 */
+	bl	trace_hardirqs_off
+#endif
 1:	bl	preempt_schedule_irq
 	rlwinm	r9,r1,0,0,(31-THREAD_SHIFT)
 	lwz	r3,TI_FLAGS(r9)
 	andi.	r0,r3,_TIF_NEED_RESCHED
 	bne-	1b
+#ifdef CONFIG_TRACE_IRQFLAGS
+	/* And now, to properly rebalance the above, we tell lockdep they
+	 * are being turned back on, which will happen when we return
+	 */
+	bl	trace_hardirqs_on
+#endif
 #else
 resume_kernel:
 #endif /* CONFIG_PREEMPT */
@@ -765,6 +857,28 @@ restore:
 	stw	r6,icache_44x_need_flush@l(r4)
 1:
 #endif  /* CONFIG_44x */
+
+	lwz	r9,_MSR(r1)
+#ifdef CONFIG_TRACE_IRQFLAGS
+	/* Lockdep doesn't know about the fact that IRQs are temporarily turned
+	 * off in this assembly code while peeking at TI_FLAGS() and such. However
+	 * we need to inform it if the exception turned interrupts off, and we
+	 * are about to trun them back on.
+	 *
+	 * The problem here sadly is that we don't know whether the exceptions was
+	 * one that turned interrupts off or not. So we always tell lockdep about
+	 * turning them on here when we go back to wherever we came from with EE
+	 * on, even if that may meen some redudant calls being tracked. Maybe later
+	 * we could encode what the exception did somewhere or test the exception
+	 * type in the pt_regs but that sounds overkill
+	 */
+	andi.	r10,r9,MSR_EE
+	beq	1f
+	bl	trace_hardirqs_on
+	lwz	r9,_MSR(r1)
+1:
+#endif /* CONFIG_TRACE_IRQFLAGS */
+
 	lwz	r0,GPR0(r1)
 	lwz	r2,GPR2(r1)
 	REST_4GPRS(3, r1)
@@ -782,7 +896,6 @@ END_FTR_SECTION_IFSET(CPU_FTR_NEED_PAIRED_STWCX)
 	stwcx.	r0,0,r1			/* to clear the reservation */
 
 #if !(defined(CONFIG_4xx) || defined(CONFIG_BOOKE))
-	lwz	r9,_MSR(r1)
 	andi.	r10,r9,MSR_RI		/* check if this exception occurred */
 	beql	nonrecoverable		/* at a bad place (MSR:RI = 0) */
 
@@ -805,7 +918,6 @@ END_FTR_SECTION_IFSET(CPU_FTR_NEED_PAIRED_STWCX)
 	MTMSRD(r10)		/* clear the RI bit */
 	.globl exc_exit_restart
 exc_exit_restart:
-	lwz	r9,_MSR(r1)
 	lwz	r12,_NIP(r1)
 	FIX_SRR1(r9,r10)
 	mtspr	SPRN_SRR0,r12
@@ -1035,11 +1147,18 @@ do_work:			/* r10 contains MSR_KERNEL here */
 	beq	do_user_signal
 
 do_resched:			/* r10 contains MSR_KERNEL here */
+	/* Note: We don't need to inform lockdep that we are enabling
+	 * interrupts here. As far as it knows, they are already enabled
+	 */
 	ori	r10,r10,MSR_EE
 	SYNC
 	MTMSRD(r10)		/* hard-enable interrupts */
 	bl	schedule
 recheck:
+	/* Note: And we don't tell it we are disabling them again
+	 * neither. Those disable/enable cycles used to peek at
+	 * TI_FLAGS aren't advertised.
+	 */
 	LOAD_MSR_KERNEL(r10,MSR_KERNEL)
 	SYNC
 	MTMSRD(r10)		/* disable interrupts */
diff --git a/arch/powerpc/kernel/head_32.S b/arch/powerpc/kernel/head_32.S
index 48469463f89e..fc2132942754 100644
--- a/arch/powerpc/kernel/head_32.S
+++ b/arch/powerpc/kernel/head_32.S
@@ -1124,9 +1124,8 @@ mmu_off:
 	RFI
 
 /*
- * Use the first pair of BAT registers to map the 1st 16MB
- * of RAM to PAGE_OFFSET.  From this point on we can't safely
- * call OF any more.
+ * On 601, we use 3 BATs to map up to 24M of RAM at _PAGE_OFFSET
+ * (we keep one for debugging) and on others, we use one 256M BAT.
  */
 initial_bats:
 	lis	r11,PAGE_OFFSET@h
@@ -1136,12 +1135,16 @@ initial_bats:
 	bne	4f
 	ori	r11,r11,4		/* set up BAT registers for 601 */
 	li	r8,0x7f			/* valid, block length = 8MB */
-	oris	r9,r11,0x800000@h	/* set up BAT reg for 2nd 8M */
-	oris	r10,r8,0x800000@h	/* set up BAT reg for 2nd 8M */
 	mtspr	SPRN_IBAT0U,r11		/* N.B. 601 has valid bit in */
 	mtspr	SPRN_IBAT0L,r8		/* lower BAT register */
-	mtspr	SPRN_IBAT1U,r9
-	mtspr	SPRN_IBAT1L,r10
+	addis	r11,r11,0x800000@h
+	addis	r8,r8,0x800000@h
+	mtspr	SPRN_IBAT1U,r11
+	mtspr	SPRN_IBAT1L,r8
+	addis	r11,r11,0x800000@h
+	addis	r8,r8,0x800000@h
+	mtspr	SPRN_IBAT2U,r11
+	mtspr	SPRN_IBAT2L,r8
 	isync
 	blr
 
diff --git a/arch/powerpc/kernel/mpc7450-pmu.c b/arch/powerpc/kernel/mpc7450-pmu.c
index 75ff47fed7bf..c244133c67a6 100644
--- a/arch/powerpc/kernel/mpc7450-pmu.c
+++ b/arch/powerpc/kernel/mpc7450-pmu.c
@@ -10,7 +10,6 @@
  */
 #include <linux/string.h>
 #include <linux/perf_counter.h>
-#include <linux/string.h>
 #include <asm/reg.h>
 #include <asm/cputable.h>
 
diff --git a/arch/powerpc/kernel/of_device.c b/arch/powerpc/kernel/of_device.c
index fa983a59c4ce..a359cb08e900 100644
--- a/arch/powerpc/kernel/of_device.c
+++ b/arch/powerpc/kernel/of_device.c
@@ -76,7 +76,7 @@ struct of_device *of_device_alloc(struct device_node *np,
 	dev->dev.archdata.of_node = np;
 
 	if (bus_id)
-		dev_set_name(&dev->dev, bus_id);
+		dev_set_name(&dev->dev, "%s", bus_id);
 	else
 		of_device_make_bus_id(dev);
 
diff --git a/arch/powerpc/kernel/power7-pmu.c b/arch/powerpc/kernel/power7-pmu.c
index 5d755ef7ac8f..5a9f5cbd40a4 100644
--- a/arch/powerpc/kernel/power7-pmu.c
+++ b/arch/powerpc/kernel/power7-pmu.c
@@ -358,6 +358,7 @@ static struct power_pmu power7_pmu = {
 	.get_constraint		= power7_get_constraint,
 	.get_alternatives	= power7_get_alternatives,
 	.disable_pmc		= power7_disable_pmc,
+	.flags			= PPMU_ALT_SIPR,
 	.n_generic		= ARRAY_SIZE(power7_generic_events),
 	.generic_events		= power7_generic_events,
 	.cache_events		= &power7_cache_events,
diff --git a/arch/powerpc/kernel/ppc970-pmu.c b/arch/powerpc/kernel/ppc970-pmu.c
index 6637c87fe70e..833097ac45dc 100644
--- a/arch/powerpc/kernel/ppc970-pmu.c
+++ b/arch/powerpc/kernel/ppc970-pmu.c
@@ -10,7 +10,6 @@
  */
 #include <linux/string.h>
 #include <linux/perf_counter.h>
-#include <linux/string.h>
 #include <asm/reg.h>
 #include <asm/cputable.h>
 
diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index 3e7135bbe40f..892a9f2e6d76 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -528,7 +528,7 @@ void show_regs(struct pt_regs * regs)
 
 	for (i = 0;  i < 32;  i++) {
 		if ((i % REGS_PER_LINE) == 0)
-			printk("\n" KERN_INFO "GPR%02d: ", i);
+			printk("\nGPR%02d: ", i);
 		printk(REG " ", regs->gpr[i]);
 		if (i == LAST_VOLATILE && !FULL_REGS(regs))
 			break;
diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c
index ee4c7609b649..c434823b8c83 100644
--- a/arch/powerpc/kernel/rtas.c
+++ b/arch/powerpc/kernel/rtas.c
@@ -38,9 +38,10 @@
 #include <asm/syscalls.h>
 #include <asm/smp.h>
 #include <asm/atomic.h>
+#include <asm/time.h>
 
 struct rtas_t rtas = {
-	.lock = SPIN_LOCK_UNLOCKED
+	.lock = __RAW_SPIN_LOCK_UNLOCKED
 };
 EXPORT_SYMBOL(rtas);
 
@@ -67,6 +68,28 @@ unsigned long rtas_rmo_buf;
 void (*rtas_flash_term_hook)(int);
 EXPORT_SYMBOL(rtas_flash_term_hook);
 
+/* RTAS use home made raw locking instead of spin_lock_irqsave
+ * because those can be called from within really nasty contexts
+ * such as having the timebase stopped which would lockup with
+ * normal locks and spinlock debugging enabled
+ */
+static unsigned long lock_rtas(void)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	preempt_disable();
+	__raw_spin_lock_flags(&rtas.lock, flags);
+	return flags;
+}
+
+static void unlock_rtas(unsigned long flags)
+{
+	__raw_spin_unlock(&rtas.lock);
+	local_irq_restore(flags);
+	preempt_enable();
+}
+
 /*
  * call_rtas_display_status and call_rtas_display_status_delay
  * are designed only for very early low-level debugging, which
@@ -79,7 +102,7 @@ static void call_rtas_display_status(char c)
 
 	if (!rtas.base)
 		return;
-	spin_lock_irqsave(&rtas.lock, s);
+	s = lock_rtas();
 
 	args->token = 10;
 	args->nargs = 1;
@@ -89,7 +112,7 @@ static void call_rtas_display_status(char c)
 
 	enter_rtas(__pa(args));
 
-	spin_unlock_irqrestore(&rtas.lock, s);
+	unlock_rtas(s);
 }
 
 static void call_rtas_display_status_delay(char c)
@@ -411,8 +434,7 @@ int rtas_call(int token, int nargs, int nret, int *outputs, ...)
 	if (!rtas.entry || token == RTAS_UNKNOWN_SERVICE)
 		return -1;
 
-	/* Gotta do something different here, use global lock for now... */
-	spin_lock_irqsave(&rtas.lock, s);
+	s = lock_rtas();
 	rtas_args = &rtas.args;
 
 	rtas_args->token = token;
@@ -439,8 +461,7 @@ int rtas_call(int token, int nargs, int nret, int *outputs, ...)
 			outputs[i] = rtas_args->rets[i+1];
 	ret = (nret > 0)? rtas_args->rets[0]: 0;
 
-	/* Gotta do something different here, use global lock for now... */
-	spin_unlock_irqrestore(&rtas.lock, s);
+	unlock_rtas(s);
 
 	if (buff_copy) {
 		log_error(buff_copy, ERR_TYPE_RTAS_LOG, 0);
@@ -837,7 +858,7 @@ asmlinkage int ppc_rtas(struct rtas_args __user *uargs)
 
 	buff_copy = get_errorlog_buffer();
 
-	spin_lock_irqsave(&rtas.lock, flags);
+	flags = lock_rtas();
 
 	rtas.args = args;
 	enter_rtas(__pa(&rtas.args));
@@ -848,7 +869,7 @@ asmlinkage int ppc_rtas(struct rtas_args __user *uargs)
 	if (args.rets[0] == -1)
 		errbuf = __fetch_rtas_last_error(buff_copy);
 
-	spin_unlock_irqrestore(&rtas.lock, flags);
+	unlock_rtas(flags);
 
 	if (buff_copy) {
 		if (errbuf)
@@ -951,3 +972,33 @@ int __init early_init_dt_scan_rtas(unsigned long node,
 	/* break now */
 	return 1;
 }
+
+static raw_spinlock_t timebase_lock;
+static u64 timebase = 0;
+
+void __cpuinit rtas_give_timebase(void)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	hard_irq_disable();
+	__raw_spin_lock(&timebase_lock);
+	rtas_call(rtas_token("freeze-time-base"), 0, 1, NULL);
+	timebase = get_tb();
+	__raw_spin_unlock(&timebase_lock);
+
+	while (timebase)
+		barrier();
+	rtas_call(rtas_token("thaw-time-base"), 0, 1, NULL);
+	local_irq_restore(flags);
+}
+
+void __cpuinit rtas_take_timebase(void)
+{
+	while (!timebase)
+		barrier();
+	__raw_spin_lock(&timebase_lock);
+	set_tb(timebase >> 32, timebase & 0xffffffff);
+	timebase = 0;
+	__raw_spin_unlock(&timebase_lock);
+}
diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c
index 1d154248cf40..e1e3059cf34b 100644
--- a/arch/powerpc/kernel/setup_32.c
+++ b/arch/powerpc/kernel/setup_32.c
@@ -119,6 +119,8 @@ notrace unsigned long __init early_init(unsigned long dt_ptr)
  */
 notrace void __init machine_init(unsigned long dt_ptr)
 {
+	lockdep_init();
+
 	/* Enable early debugging if any specified (see udbg.h) */
 	udbg_early_init();
 
diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index 65484b2200b3..0b47de07302d 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -68,7 +68,8 @@ EXPORT_PER_CPU_SYMBOL(cpu_core_map);
 /* SMP operations for this machine */
 struct smp_ops_t *smp_ops;
 
-static volatile unsigned int cpu_callin_map[NR_CPUS];
+/* Can't be static due to PowerMac hackery */
+volatile unsigned int cpu_callin_map[NR_CPUS];
 
 int smt_enabled_at_boot = 1;
 
diff --git a/arch/powerpc/kernel/udbg_16550.c b/arch/powerpc/kernel/udbg_16550.c
index 0362a891e54e..acb74a17bbbf 100644
--- a/arch/powerpc/kernel/udbg_16550.c
+++ b/arch/powerpc/kernel/udbg_16550.c
@@ -219,7 +219,7 @@ void udbg_init_pas_realmode(void)
 #ifdef CONFIG_PPC_EARLY_DEBUG_44x
 #include <platforms/44x/44x.h>
 
-static int udbg_44x_as1_flush(void)
+static void udbg_44x_as1_flush(void)
 {
 	if (udbg_comport) {
 		while ((as1_readb(&udbg_comport->lsr) & LSR_THRE) == 0)
diff --git a/arch/powerpc/mm/Makefile b/arch/powerpc/mm/Makefile
index 2d2192e48de7..3e68363405b7 100644
--- a/arch/powerpc/mm/Makefile
+++ b/arch/powerpc/mm/Makefile
@@ -30,3 +30,4 @@ obj-$(CONFIG_PPC_MM_SLICES)	+= slice.o
 obj-$(CONFIG_HUGETLB_PAGE)	+= hugetlbpage.o
 obj-$(CONFIG_PPC_SUBPAGE_PROT)	+= subpage-prot.o
 obj-$(CONFIG_NOT_COHERENT_CACHE) += dma-noncoherent.o
+obj-$(CONFIG_HIGHMEM)		+= highmem.o
diff --git a/arch/powerpc/mm/gup.c b/arch/powerpc/mm/gup.c
index bc400c78c97f..bc122a120bf0 100644
--- a/arch/powerpc/mm/gup.c
+++ b/arch/powerpc/mm/gup.c
@@ -159,7 +159,7 @@ int get_user_pages_fast(unsigned long start, int nr_pages, int write,
 	int psize;
 #endif
 
-	pr_debug("%s(%lx,%x,%s)\n", __func__, start, nr_pages, write ? "write" : "read");
+	pr_devel("%s(%lx,%x,%s)\n", __func__, start, nr_pages, write ? "write" : "read");
 
 	start &= PAGE_MASK;
 	addr = start;
@@ -170,7 +170,7 @@ int get_user_pages_fast(unsigned long start, int nr_pages, int write,
 					start, len)))
 		goto slow_irqon;
 
-	pr_debug("  aligned: %lx .. %lx\n", start, end);
+	pr_devel("  aligned: %lx .. %lx\n", start, end);
 
 #ifdef CONFIG_HUGETLB_PAGE
 	/* We bail out on slice boundary crossing when hugetlb is
@@ -234,7 +234,7 @@ int get_user_pages_fast(unsigned long start, int nr_pages, int write,
 		do {
 			VM_BUG_ON(shift != mmu_psize_defs[get_slice_psize(mm, a)].shift);
 			ptep = huge_pte_offset(mm, a);
-			pr_debug(" %016lx: huge ptep %p\n", a, ptep);
+			pr_devel(" %016lx: huge ptep %p\n", a, ptep);
 			if (!ptep || !gup_huge_pte(ptep, hstate, &a, end, write, pages,
 						   &nr))
 				goto slow;
@@ -249,7 +249,7 @@ int get_user_pages_fast(unsigned long start, int nr_pages, int write,
 #ifdef CONFIG_PPC64
 			VM_BUG_ON(shift != mmu_psize_defs[get_slice_psize(mm, addr)].shift);
 #endif
-			pr_debug("  %016lx: normal pgd %p\n", addr,
+			pr_devel("  %016lx: normal pgd %p\n", addr,
 				 (void *)pgd_val(pgd));
 			next = pgd_addr_end(addr, end);
 			if (pgd_none(pgd))
@@ -269,7 +269,7 @@ int get_user_pages_fast(unsigned long start, int nr_pages, int write,
 slow:
 		local_irq_enable();
 slow_irqon:
-		pr_debug("  slow path ! nr = %d\n", nr);
+		pr_devel("  slow path ! nr = %d\n", nr);
 
 		/* Try to get the remaining pages with get_user_pages */
 		start += nr << PAGE_SHIFT;
diff --git a/arch/powerpc/mm/highmem.c b/arch/powerpc/mm/highmem.c
new file mode 100644
index 000000000000..c2186c74c85a
--- /dev/null
+++ b/arch/powerpc/mm/highmem.c
@@ -0,0 +1,77 @@
+/*
+ * highmem.c: virtual kernel memory mappings for high memory
+ *
+ * PowerPC version, stolen from the i386 version.
+ *
+ * Used in CONFIG_HIGHMEM systems for memory pages which
+ * are not addressable by direct kernel virtual addresses.
+ *
+ * Copyright (C) 1999 Gerhard Wichert, Siemens AG
+ *		      Gerhard.Wichert@pdb.siemens.de
+ *
+ *
+ * Redesigned the x86 32-bit VM architecture to deal with
+ * up to 16 Terrabyte physical memory. With current x86 CPUs
+ * we now support up to 64 Gigabytes physical RAM.
+ *
+ * Copyright (C) 1999 Ingo Molnar <mingo@redhat.com>
+ *
+ * Reworked for PowerPC by various contributors. Moved from
+ * highmem.h by Benjamin Herrenschmidt (c) 2009 IBM Corp.
+ */
+
+#include <linux/highmem.h>
+#include <linux/module.h>
+
+/*
+ * The use of kmap_atomic/kunmap_atomic is discouraged - kmap/kunmap
+ * gives a more generic (and caching) interface. But kmap_atomic can
+ * be used in IRQ contexts, so in some (very limited) cases we need
+ * it.
+ */
+void *kmap_atomic_prot(struct page *page, enum km_type type, pgprot_t prot)
+{
+	unsigned int idx;
+	unsigned long vaddr;
+
+	/* even !CONFIG_PREEMPT needs this, for in_atomic in do_page_fault */
+	pagefault_disable();
+	if (!PageHighMem(page))
+		return page_address(page);
+
+	debug_kmap_atomic(type);
+	idx = type + KM_TYPE_NR*smp_processor_id();
+	vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
+#ifdef CONFIG_DEBUG_HIGHMEM
+	BUG_ON(!pte_none(*(kmap_pte-idx)));
+#endif
+	__set_pte_at(&init_mm, vaddr, kmap_pte-idx, mk_pte(page, prot), 1);
+	local_flush_tlb_page(NULL, vaddr);
+
+	return (void*) vaddr;
+}
+EXPORT_SYMBOL(kmap_atomic_prot);
+
+void kunmap_atomic(void *kvaddr, enum km_type type)
+{
+#ifdef CONFIG_DEBUG_HIGHMEM
+	unsigned long vaddr = (unsigned long) kvaddr & PAGE_MASK;
+	enum fixed_addresses idx = type + KM_TYPE_NR*smp_processor_id();
+
+	if (vaddr < __fix_to_virt(FIX_KMAP_END)) {
+		pagefault_enable();
+		return;
+	}
+
+	BUG_ON(vaddr != __fix_to_virt(FIX_KMAP_BEGIN + idx));
+
+	/*
+	 * force other mappings to Oops if they'll try to access
+	 * this pte without first remap it
+	 */
+	pte_clear(&init_mm, vaddr, kmap_pte-idx);
+	local_flush_tlb_page(NULL, vaddr);
+#endif
+	pagefault_enable();
+}
+EXPORT_SYMBOL(kunmap_atomic);
diff --git a/arch/powerpc/mm/mmu_context_nohash.c b/arch/powerpc/mm/mmu_context_nohash.c
index 8343986809c0..92a197117d5b 100644
--- a/arch/powerpc/mm/mmu_context_nohash.c
+++ b/arch/powerpc/mm/mmu_context_nohash.c
@@ -89,7 +89,7 @@ static unsigned int steal_context_smp(unsigned int id)
 				id = first_context;
 			continue;
 		}
-		pr_debug("[%d] steal context %d from mm @%p\n",
+		pr_devel("[%d] steal context %d from mm @%p\n",
 			 smp_processor_id(), id, mm);
 
 		/* Mark this mm has having no context anymore */
@@ -126,7 +126,7 @@ static unsigned int steal_context_up(unsigned int id)
 	/* Pick up the victim mm */
 	mm = context_mm[id];
 
-	pr_debug("[%d] steal context %d from mm @%p\n", cpu, id, mm);
+	pr_devel("[%d] steal context %d from mm @%p\n", cpu, id, mm);
 
 	/* Flush the TLB for that context */
 	local_flush_tlb_mm(mm);
@@ -180,7 +180,7 @@ void switch_mmu_context(struct mm_struct *prev, struct mm_struct *next)
 	spin_lock(&context_lock);
 
 #ifndef DEBUG_STEAL_ONLY
-	pr_debug("[%d] activating context for mm @%p, active=%d, id=%d\n",
+	pr_devel("[%d] activating context for mm @%p, active=%d, id=%d\n",
 		 cpu, next, next->context.active, next->context.id);
 #endif
 
@@ -189,7 +189,7 @@ void switch_mmu_context(struct mm_struct *prev, struct mm_struct *next)
 	next->context.active++;
 	if (prev) {
 #ifndef DEBUG_STEAL_ONLY
-		pr_debug(" old context %p active was: %d\n",
+		pr_devel(" old context %p active was: %d\n",
 			 prev, prev->context.active);
 #endif
 		WARN_ON(prev->context.active < 1);
@@ -236,7 +236,7 @@ void switch_mmu_context(struct mm_struct *prev, struct mm_struct *next)
 	next->context.id = id;
 
 #ifndef DEBUG_STEAL_ONLY
-	pr_debug("[%d] picked up new id %d, nrf is now %d\n",
+	pr_devel("[%d] picked up new id %d, nrf is now %d\n",
 		 cpu, id, nr_free_contexts);
 #endif
 
@@ -247,7 +247,7 @@ void switch_mmu_context(struct mm_struct *prev, struct mm_struct *next)
 	 * local TLB for it and unmark it before we use it
 	 */
 	if (test_bit(id, stale_map[cpu])) {
-		pr_debug("[%d] flushing stale context %d for mm @%p !\n",
+		pr_devel("[%d] flushing stale context %d for mm @%p !\n",
 			 cpu, id, next);
 		local_flush_tlb_mm(next);
 
@@ -314,13 +314,13 @@ static int __cpuinit mmu_context_cpu_notify(struct notifier_block *self,
 	switch (action) {
 	case CPU_ONLINE:
 	case CPU_ONLINE_FROZEN:
-		pr_debug("MMU: Allocating stale context map for CPU %d\n", cpu);
+		pr_devel("MMU: Allocating stale context map for CPU %d\n", cpu);
 		stale_map[cpu] = kzalloc(CTX_MAP_SIZE, GFP_KERNEL);
 		break;
 #ifdef CONFIG_HOTPLUG_CPU
 	case CPU_DEAD:
 	case CPU_DEAD_FROZEN:
-		pr_debug("MMU: Freeing stale context map for CPU %d\n", cpu);
+		pr_devel("MMU: Freeing stale context map for CPU %d\n", cpu);
 		kfree(stale_map[cpu]);
 		stale_map[cpu] = NULL;
 		break;
diff --git a/arch/powerpc/mm/pgtable.c b/arch/powerpc/mm/pgtable.c
index ae1d67cc090c..627767d6169b 100644
--- a/arch/powerpc/mm/pgtable.c
+++ b/arch/powerpc/mm/pgtable.c
@@ -129,12 +129,12 @@ static pte_t do_dcache_icache_coherency(pte_t pte)
 	page = pfn_to_page(pfn);
 
 	if (!PageReserved(page) && !test_bit(PG_arch_1, &page->flags)) {
-		pr_debug("do_dcache_icache_coherency... flushing\n");
+		pr_devel("do_dcache_icache_coherency... flushing\n");
 		flush_dcache_icache_page(page);
 		set_bit(PG_arch_1, &page->flags);
 	}
 	else
-		pr_debug("do_dcache_icache_coherency... already clean\n");
+		pr_devel("do_dcache_icache_coherency... already clean\n");
 	return __pte(pte_val(pte) | _PAGE_HWEXEC);
 }
 
diff --git a/arch/powerpc/mm/slb.c b/arch/powerpc/mm/slb.c
index 3b52c80e5e33..5b7038f248b6 100644
--- a/arch/powerpc/mm/slb.c
+++ b/arch/powerpc/mm/slb.c
@@ -14,8 +14,6 @@
  *      2 of the License, or (at your option) any later version.
  */
 
-#undef DEBUG
-
 #include <asm/pgtable.h>
 #include <asm/mmu.h>
 #include <asm/mmu_context.h>
@@ -27,11 +25,6 @@
 #include <linux/compiler.h>
 #include <asm/udbg.h>
 
-#ifdef DEBUG
-#define DBG(fmt...) printk(fmt)
-#else
-#define DBG pr_debug
-#endif
 
 extern void slb_allocate_realmode(unsigned long ea);
 extern void slb_allocate_user(unsigned long ea);
@@ -285,13 +278,13 @@ void slb_initialize(void)
 		patch_slb_encoding(slb_compare_rr_to_size,
 				   mmu_slb_size);
 
-		DBG("SLB: linear  LLP = %04lx\n", linear_llp);
-		DBG("SLB: io      LLP = %04lx\n", io_llp);
+		pr_devel("SLB: linear  LLP = %04lx\n", linear_llp);
+		pr_devel("SLB: io      LLP = %04lx\n", io_llp);
 
 #ifdef CONFIG_SPARSEMEM_VMEMMAP
 		patch_slb_encoding(slb_miss_kernel_load_vmemmap,
 				   SLB_VSID_KERNEL | vmemmap_llp);
-		DBG("SLB: vmemmap LLP = %04lx\n", vmemmap_llp);
+		pr_devel("SLB: vmemmap LLP = %04lx\n", vmemmap_llp);
 #endif
 	}
 
diff --git a/arch/powerpc/mm/tlb_hash64.c b/arch/powerpc/mm/tlb_hash64.c
index 1be1b5e59796..937eb90677d9 100644
--- a/arch/powerpc/mm/tlb_hash64.c
+++ b/arch/powerpc/mm/tlb_hash64.c
@@ -72,7 +72,7 @@ void hpte_need_flush(struct mm_struct *mm, unsigned long addr,
 	 */
 	if (huge) {
 #ifdef CONFIG_HUGETLB_PAGE
-		psize = get_slice_psize(mm, addr);;
+		psize = get_slice_psize(mm, addr);
 #else
 		BUG();
 		psize = pte_pagesize_index(mm, addr, pte); /* shutup gcc */
diff --git a/arch/powerpc/oprofile/cell/vma_map.c b/arch/powerpc/oprofile/cell/vma_map.c
index 258fa4411e9e..c591339daf58 100644
--- a/arch/powerpc/oprofile/cell/vma_map.c
+++ b/arch/powerpc/oprofile/cell/vma_map.c
@@ -185,7 +185,7 @@ struct vma_to_fileoffset_map *create_vma_map(const struct spu *aSpu,
 			goto fail;
 
 		if (shdr_str.sh_type != SHT_STRTAB)
-			goto fail;;
+			goto fail;
 
 		for (j = 0; j < shdr.sh_size / sizeof (sym); j++) {
 			if (copy_from_user(&sym, spu_elf_start +
diff --git a/arch/powerpc/platforms/44x/warp.c b/arch/powerpc/platforms/44x/warp.c
index 42e09a9f77e2..e5c1b096c3e1 100644
--- a/arch/powerpc/platforms/44x/warp.c
+++ b/arch/powerpc/platforms/44x/warp.c
@@ -16,6 +16,7 @@
 #include <linux/interrupt.h>
 #include <linux/delay.h>
 #include <linux/of_gpio.h>
+#include <linux/of_i2c.h>
 
 #include <asm/machdep.h>
 #include <asm/prom.h>
@@ -63,9 +64,6 @@ define_machine(warp) {
 };
 
 
-static u32 post_info;
-
-/* I am not sure this is the best place for this... */
 static int __init warp_post_info(void)
 {
 	struct device_node *np;
@@ -87,10 +85,9 @@ static int __init warp_post_info(void)
 
 	iounmap(fpga);
 
-	if (post1 || post2) {
+	if (post1 || post2)
 		printk(KERN_INFO "Warp POST %08x %08x\n", post1, post2);
-		post_info = 1;
-	} else
+	else
 		printk(KERN_INFO "Warp POST OK\n");
 
 	return 0;
@@ -166,6 +163,9 @@ static irqreturn_t temp_isr(int irq, void *context)
 		value ^= 1;
 		mdelay(500);
 	}
+
+	/* Not reached */
+	return IRQ_HANDLED;
 }
 
 static int pika_setup_leds(void)
@@ -179,24 +179,19 @@ static int pika_setup_leds(void)
 	}
 
 	for_each_child_of_node(np, child)
-		if (strcmp(child->name, "green") == 0) {
+		if (strcmp(child->name, "green") == 0)
 			green_led = of_get_gpio(child, 0);
-			/* Turn back on the green LED */
-			gpio_set_value(green_led, 1);
-		} else if (strcmp(child->name, "red") == 0) {
+		else if (strcmp(child->name, "red") == 0)
 			red_led = of_get_gpio(child, 0);
-			/* Set based on post */
-			gpio_set_value(red_led, post_info);
-		}
 
 	of_node_put(np);
 
 	return 0;
 }
 
-static void pika_setup_critical_temp(struct i2c_client *client)
+static void pika_setup_critical_temp(struct device_node *np,
+				     struct i2c_client *client)
 {
-	struct device_node *np;
 	int irq, rc;
 
 	/* Do this before enabling critical temp interrupt since we
@@ -208,14 +203,7 @@ static void pika_setup_critical_temp(struct i2c_client *client)
 	i2c_smbus_write_byte_data(client, 2, 65); /* Thigh */
 	i2c_smbus_write_byte_data(client, 3,  0); /* Tlow */
 
-	np = of_find_compatible_node(NULL, NULL, "adi,ad7414");
-	if (np == NULL) {
-		printk(KERN_ERR __FILE__ ": Unable to find ad7414\n");
-		return;
-	}
-
 	irq = irq_of_parse_and_map(np, 0);
-	of_node_put(np);
 	if (irq  == NO_IRQ) {
 		printk(KERN_ERR __FILE__ ": Unable to get ad7414 irq\n");
 		return;
@@ -244,32 +232,24 @@ static inline void pika_dtm_check_fan(void __iomem *fpga)
 
 static int pika_dtm_thread(void __iomem *fpga)
 {
-	struct i2c_adapter *adap;
+	struct device_node *np;
 	struct i2c_client *client;
 
-	/* We loop in case either driver was compiled as a module and
-	 * has not been insmoded yet.
-	 */
-	while (!(adap = i2c_get_adapter(0))) {
-		set_current_state(TASK_INTERRUPTIBLE);
-		schedule_timeout(HZ);
-	}
-
-	while (1) {
-		list_for_each_entry(client, &adap->clients, list)
-			if (client->addr == 0x4a)
-				goto found_it;
+	np = of_find_compatible_node(NULL, NULL, "adi,ad7414");
+	if (np == NULL)
+		return -ENOENT;
 
-		set_current_state(TASK_INTERRUPTIBLE);
-		schedule_timeout(HZ);
+	client = of_find_i2c_device_by_node(np);
+	if (client == NULL) {
+		of_node_put(np);
+		return -ENOENT;
 	}
 
-found_it:
-	pika_setup_critical_temp(client);
+	pika_setup_critical_temp(np, client);
 
-	i2c_put_adapter(adap);
+	of_node_put(np);
 
-	printk(KERN_INFO "PIKA DTM thread running.\n");
+	printk(KERN_INFO "Warp DTM thread running.\n");
 
 	while (!kthread_should_stop()) {
 		int val;
@@ -291,7 +271,6 @@ found_it:
 	return 0;
 }
 
-
 static int __init pika_dtm_start(void)
 {
 	struct task_struct *dtm_thread;
diff --git a/arch/powerpc/platforms/82xx/pq2ads-pci-pic.c b/arch/powerpc/platforms/82xx/pq2ads-pci-pic.c
index ddf0bdc0fc8b..7ee979f323d1 100644
--- a/arch/powerpc/platforms/82xx/pq2ads-pci-pic.c
+++ b/arch/powerpc/platforms/82xx/pq2ads-pci-pic.c
@@ -147,7 +147,7 @@ int __init pq2ads_pci_init_irq(void)
 		goto out;
 	}
 
-	priv = alloc_bootmem(sizeof(struct pq2ads_pci_pic));
+	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
 	if (!priv) {
 		of_node_put(np);
 		ret = -ENOMEM;
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
index 77f90b356356..60ed9c067b1d 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
@@ -285,6 +285,7 @@ static struct of_device_id mpc85xx_ids[] = {
 	{ .type = "qe", },
 	{ .compatible = "fsl,qe", },
 	{ .compatible = "gianfar", },
+	{ .compatible = "fsl,rapidio-delta", },
 	{},
 };
 
diff --git a/arch/powerpc/platforms/85xx/smp.c b/arch/powerpc/platforms/85xx/smp.c
index cc0b0db8a6f3..62c592ede641 100644
--- a/arch/powerpc/platforms/85xx/smp.c
+++ b/arch/powerpc/platforms/85xx/smp.c
@@ -52,20 +52,19 @@ smp_85xx_kick_cpu(int nr)
 
 	pr_debug("smp_85xx_kick_cpu: kick CPU #%d\n", nr);
 
-	local_irq_save(flags);
-
 	np = of_get_cpu_node(nr, NULL);
 	cpu_rel_addr = of_get_property(np, "cpu-release-addr", NULL);
 
 	if (cpu_rel_addr == NULL) {
 		printk(KERN_ERR "No cpu-release-addr for cpu %d\n", nr);
-		local_irq_restore(flags);
 		return;
 	}
 
 	/* Map the spin table */
 	bptr_vaddr = ioremap(*cpu_rel_addr, SIZE_BOOT_ENTRY);
 
+	local_irq_save(flags);
+
 	out_be32(bptr_vaddr + BOOT_ENTRY_PIR, nr);
 	out_be32(bptr_vaddr + BOOT_ENTRY_ADDR_LOWER, __pa(__early_start));
 
@@ -73,10 +72,10 @@ smp_85xx_kick_cpu(int nr)
 	while ((__secondary_hold_acknowledge != nr) && (++n < 1000))
 		mdelay(1);
 
-	iounmap(bptr_vaddr);
-
 	local_irq_restore(flags);
 
+	iounmap(bptr_vaddr);
+
 	pr_debug("waited %d msecs for CPU #%d.\n", n, nr);
 }
 
diff --git a/arch/powerpc/platforms/85xx/socrates.c b/arch/powerpc/platforms/85xx/socrates.c
index d0e8443b12c6..747d8fb3ab82 100644
--- a/arch/powerpc/platforms/85xx/socrates.c
+++ b/arch/powerpc/platforms/85xx/socrates.c
@@ -102,10 +102,11 @@ static struct of_device_id __initdata socrates_of_bus_ids[] = {
 	{},
 };
 
-static void __init socrates_init(void)
+static int __init socrates_publish_devices(void)
 {
-	of_platform_bus_probe(NULL, socrates_of_bus_ids, NULL);
+	return of_platform_bus_probe(NULL, socrates_of_bus_ids, NULL);
 }
+machine_device_initcall(socrates, socrates_publish_devices);
 
 /*
  * Called very early, device-tree isn't unflattened
@@ -124,7 +125,6 @@ define_machine(socrates) {
 	.name			= "Socrates",
 	.probe			= socrates_probe,
 	.setup_arch		= socrates_setup_arch,
-	.init			= socrates_init,
 	.init_IRQ		= socrates_pic_init,
 	.get_irq		= mpic_get_irq,
 	.restart		= fsl_rstcr_restart,
diff --git a/arch/powerpc/platforms/85xx/xes_mpc85xx.c b/arch/powerpc/platforms/85xx/xes_mpc85xx.c
index ee01532786e4..1b426050a2f9 100644
--- a/arch/powerpc/platforms/85xx/xes_mpc85xx.c
+++ b/arch/powerpc/platforms/85xx/xes_mpc85xx.c
@@ -32,7 +32,6 @@
 
 #include <sysdev/fsl_soc.h>
 #include <sysdev/fsl_pci.h>
-#include <linux/of_platform.h>
 
 /* A few bit definitions needed for fixups on some boards */
 #define MPC85xx_L2CTL_L2E		0x80000000 /* L2 enable */
diff --git a/arch/powerpc/platforms/cell/axon_msi.c b/arch/powerpc/platforms/cell/axon_msi.c
index c71498dbf211..aca5741ddc67 100644
--- a/arch/powerpc/platforms/cell/axon_msi.c
+++ b/arch/powerpc/platforms/cell/axon_msi.c
@@ -85,7 +85,7 @@ static inline void axon_msi_debug_setup(struct device_node *dn,
 
 static void msic_dcr_write(struct axon_msic *msic, unsigned int dcr_n, u32 val)
 {
-	pr_debug("axon_msi: dcr_write(0x%x, 0x%x)\n", val, dcr_n);
+	pr_devel("axon_msi: dcr_write(0x%x, 0x%x)\n", val, dcr_n);
 
 	dcr_write(msic->dcr_host, dcr_n, val);
 }
@@ -98,7 +98,7 @@ static void axon_msi_cascade(unsigned int irq, struct irq_desc *desc)
 	int retry = 0;
 
 	write_offset = dcr_read(msic->dcr_host, MSIC_WRITE_OFFSET_REG);
-	pr_debug("axon_msi: original write_offset 0x%x\n", write_offset);
+	pr_devel("axon_msi: original write_offset 0x%x\n", write_offset);
 
 	/* write_offset doesn't wrap properly, so we have to mask it */
 	write_offset &= MSIC_FIFO_SIZE_MASK;
@@ -108,7 +108,7 @@ static void axon_msi_cascade(unsigned int irq, struct irq_desc *desc)
 		msi  = le32_to_cpu(msic->fifo_virt[idx]);
 		msi &= 0xFFFF;
 
-		pr_debug("axon_msi: woff %x roff %x msi %x\n",
+		pr_devel("axon_msi: woff %x roff %x msi %x\n",
 			  write_offset, msic->read_offset, msi);
 
 		if (msi < NR_IRQS && irq_map[msi].host == msic->irq_host) {
@@ -123,12 +123,12 @@ static void axon_msi_cascade(unsigned int irq, struct irq_desc *desc)
 			 */
 			udelay(1);
 			retry++;
-			pr_debug("axon_msi: invalid irq 0x%x!\n", msi);
+			pr_devel("axon_msi: invalid irq 0x%x!\n", msi);
 			continue;
 		}
 
 		if (retry) {
-			pr_debug("axon_msi: late irq 0x%x, retry %d\n",
+			pr_devel("axon_msi: late irq 0x%x, retry %d\n",
 				 msi, retry);
 			retry = 0;
 		}
@@ -332,7 +332,7 @@ static int axon_msi_shutdown(struct of_device *device)
 	struct axon_msic *msic = dev_get_drvdata(&device->dev);
 	u32 tmp;
 
-	pr_debug("axon_msi: disabling %s\n",
+	pr_devel("axon_msi: disabling %s\n",
 		  msic->irq_host->of_node->full_name);
 	tmp  = dcr_read(msic->dcr_host, MSIC_CTRL_REG);
 	tmp &= ~MSIC_CTRL_ENABLE & ~MSIC_CTRL_IRQ_ENABLE;
@@ -349,7 +349,7 @@ static int axon_msi_probe(struct of_device *device,
 	unsigned int virq;
 	int dcr_base, dcr_len;
 
-	pr_debug("axon_msi: setting up dn %s\n", dn->full_name);
+	pr_devel("axon_msi: setting up dn %s\n", dn->full_name);
 
 	msic = kzalloc(sizeof(struct axon_msic), GFP_KERNEL);
 	if (!msic) {
@@ -403,7 +403,7 @@ static int axon_msi_probe(struct of_device *device,
 
 	set_irq_data(virq, msic);
 	set_irq_chained_handler(virq, axon_msi_cascade);
-	pr_debug("axon_msi: irq 0x%x setup for axon_msi\n", virq);
+	pr_devel("axon_msi: irq 0x%x setup for axon_msi\n", virq);
 
 	/* Enable the MSIC hardware */
 	msic_dcr_write(msic, MSIC_BASE_ADDR_HI_REG, msic->fifo_phys >> 32);
@@ -484,13 +484,13 @@ void axon_msi_debug_setup(struct device_node *dn, struct axon_msic *msic)
 
 	addr = of_translate_address(dn, of_get_property(dn, "reg", NULL));
 	if (addr == OF_BAD_ADDR) {
-		pr_debug("axon_msi: couldn't translate reg property\n");
+		pr_devel("axon_msi: couldn't translate reg property\n");
 		return;
 	}
 
 	msic->trigger = ioremap(addr, 0x4);
 	if (!msic->trigger) {
-		pr_debug("axon_msi: ioremap failed\n");
+		pr_devel("axon_msi: ioremap failed\n");
 		return;
 	}
 
@@ -498,7 +498,7 @@ void axon_msi_debug_setup(struct device_node *dn, struct axon_msic *msic)
 
 	if (!debugfs_create_file(name, 0600, powerpc_debugfs_root,
 				 msic, &fops_msic)) {
-		pr_debug("axon_msi: debugfs_create_file failed!\n");
+		pr_devel("axon_msi: debugfs_create_file failed!\n");
 		return;
 	}
 }
diff --git a/arch/powerpc/platforms/cell/smp.c b/arch/powerpc/platforms/cell/smp.c
index 9046803c8276..bc97fada48c6 100644
--- a/arch/powerpc/platforms/cell/smp.c
+++ b/arch/powerpc/platforms/cell/smp.c
@@ -36,7 +36,6 @@
 #include <asm/prom.h>
 #include <asm/smp.h>
 #include <asm/paca.h>
-#include <asm/time.h>
 #include <asm/machdep.h>
 #include <asm/cputable.h>
 #include <asm/firmware.h>
@@ -140,31 +139,6 @@ static void __devinit smp_cell_setup_cpu(int cpu)
 	mtspr(SPRN_DABRX, DABRX_KERNEL | DABRX_USER);
 }
 
-static DEFINE_SPINLOCK(timebase_lock);
-static unsigned long timebase = 0;
-
-static void __devinit cell_give_timebase(void)
-{
-	spin_lock(&timebase_lock);
-	rtas_call(rtas_token("freeze-time-base"), 0, 1, NULL);
-	timebase = get_tb();
-	spin_unlock(&timebase_lock);
-
-	while (timebase)
-		barrier();
-	rtas_call(rtas_token("thaw-time-base"), 0, 1, NULL);
-}
-
-static void __devinit cell_take_timebase(void)
-{
-	while (!timebase)
-		barrier();
-	spin_lock(&timebase_lock);
-	set_tb(timebase >> 32, timebase & 0xffffffff);
-	timebase = 0;
-	spin_unlock(&timebase_lock);
-}
-
 static void __devinit smp_cell_kick_cpu(int nr)
 {
 	BUG_ON(nr < 0 || nr >= NR_CPUS);
@@ -224,8 +198,8 @@ void __init smp_init_cell(void)
 
 	/* Non-lpar has additional take/give timebase */
 	if (rtas_token("freeze-time-base") != RTAS_UNKNOWN_SERVICE) {
-		smp_ops->give_timebase = cell_give_timebase;
-		smp_ops->take_timebase = cell_take_timebase;
+		smp_ops->give_timebase = rtas_give_timebase;
+		smp_ops->take_timebase = rtas_take_timebase;
 	}
 
 	DBG(" <- smp_init_cell()\n");
diff --git a/arch/powerpc/platforms/chrp/smp.c b/arch/powerpc/platforms/chrp/smp.c
index 10a4a4d063b6..02cafecc90e3 100644
--- a/arch/powerpc/platforms/chrp/smp.c
+++ b/arch/powerpc/platforms/chrp/smp.c
@@ -26,7 +26,6 @@
 #include <asm/io.h>
 #include <asm/prom.h>
 #include <asm/smp.h>
-#include <asm/time.h>
 #include <asm/machdep.h>
 #include <asm/mpic.h>
 #include <asm/rtas.h>
@@ -42,40 +41,12 @@ static void __devinit smp_chrp_setup_cpu(int cpu_nr)
 	mpic_setup_this_cpu();
 }
 
-static DEFINE_SPINLOCK(timebase_lock);
-static unsigned int timebase_upper = 0, timebase_lower = 0;
-
-void __devinit smp_chrp_give_timebase(void)
-{
-	spin_lock(&timebase_lock);
-	rtas_call(rtas_token("freeze-time-base"), 0, 1, NULL);
-	timebase_upper = get_tbu();
-	timebase_lower = get_tbl();
-	spin_unlock(&timebase_lock);
-
-	while (timebase_upper || timebase_lower)
-		barrier();
-	rtas_call(rtas_token("thaw-time-base"), 0, 1, NULL);
-}
-
-void __devinit smp_chrp_take_timebase(void)
-{
-	while (!(timebase_upper || timebase_lower))
-		barrier();
-	spin_lock(&timebase_lock);
-	set_tb(timebase_upper, timebase_lower);
-	timebase_upper = 0;
-	timebase_lower = 0;
-	spin_unlock(&timebase_lock);
-	printk("CPU %i taken timebase\n", smp_processor_id());
-}
-
 /* CHRP with openpic */
 struct smp_ops_t chrp_smp_ops = {
 	.message_pass = smp_mpic_message_pass,
 	.probe = smp_mpic_probe,
 	.kick_cpu = smp_chrp_kick_cpu,
 	.setup_cpu = smp_chrp_setup_cpu,
-	.give_timebase = smp_chrp_give_timebase,
-	.take_timebase = smp_chrp_take_timebase,
+	.give_timebase = rtas_give_timebase,
+	.take_timebase = rtas_take_timebase,
 };
diff --git a/arch/powerpc/platforms/pasemi/setup.c b/arch/powerpc/platforms/pasemi/setup.c
index 153051eb6d93..a4619347aa7e 100644
--- a/arch/powerpc/platforms/pasemi/setup.c
+++ b/arch/powerpc/platforms/pasemi/setup.c
@@ -71,20 +71,25 @@ static void pas_restart(char *cmd)
 }
 
 #ifdef CONFIG_SMP
-static DEFINE_SPINLOCK(timebase_lock);
+static raw_spinlock_t timebase_lock;
 static unsigned long timebase;
 
 static void __devinit pas_give_timebase(void)
 {
-	spin_lock(&timebase_lock);
+	unsigned long flags;
+
+	local_irq_save(flags);
+	hard_irq_disable();
+	__raw_spin_lock(&timebase_lock);
 	mtspr(SPRN_TBCTL, TBCTL_FREEZE);
 	isync();
 	timebase = get_tb();
-	spin_unlock(&timebase_lock);
+	__raw_spin_unlock(&timebase_lock);
 
 	while (timebase)
 		barrier();
 	mtspr(SPRN_TBCTL, TBCTL_RESTART);
+	local_irq_restore(flags);
 }
 
 static void __devinit pas_take_timebase(void)
@@ -92,10 +97,10 @@ static void __devinit pas_take_timebase(void)
 	while (!timebase)
 		smp_rmb();
 
-	spin_lock(&timebase_lock);
+	__raw_spin_lock(&timebase_lock);
 	set_tb(timebase >> 32, timebase & 0xffffffff);
 	timebase = 0;
-	spin_unlock(&timebase_lock);
+	__raw_spin_unlock(&timebase_lock);
 }
 
 struct smp_ops_t pas_smp_ops = {
diff --git a/arch/powerpc/platforms/powermac/cpufreq_64.c b/arch/powerpc/platforms/powermac/cpufreq_64.c
index 22ecfbe7183d..708c75133377 100644
--- a/arch/powerpc/platforms/powermac/cpufreq_64.c
+++ b/arch/powerpc/platforms/powermac/cpufreq_64.c
@@ -251,7 +251,7 @@ static void g5_pfunc_switch_volt(int speed_mode)
 static struct pmf_function *pfunc_cpu_setfreq_high;
 static struct pmf_function *pfunc_cpu_setfreq_low;
 static struct pmf_function *pfunc_cpu_getfreq;
-static struct pmf_function *pfunc_slewing_done;;
+static struct pmf_function *pfunc_slewing_done;
 
 static int g5_pfunc_switch_freq(int speed_mode)
 {
diff --git a/arch/powerpc/platforms/powermac/pic.c b/arch/powerpc/platforms/powermac/pic.c
index dce736349107..d212006a5b3c 100644
--- a/arch/powerpc/platforms/powermac/pic.c
+++ b/arch/powerpc/platforms/powermac/pic.c
@@ -609,7 +609,7 @@ static int pmacpic_find_viaint(void)
 	np = of_find_node_by_name(NULL, "via-pmu");
 	if (np == NULL)
 		goto not_found;
-	viaint = irq_of_parse_and_map(np, 0);;
+	viaint = irq_of_parse_and_map(np, 0);
 
 not_found:
 #endif /* CONFIG_ADB_PMU */
diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c
index 86f69a4eb49b..c20522656367 100644
--- a/arch/powerpc/platforms/powermac/setup.c
+++ b/arch/powerpc/platforms/powermac/setup.c
@@ -103,11 +103,6 @@ unsigned long smu_cmdbuf_abs;
 EXPORT_SYMBOL(smu_cmdbuf_abs);
 #endif
 
-#ifdef CONFIG_SMP
-extern struct smp_ops_t psurge_smp_ops;
-extern struct smp_ops_t core99_smp_ops;
-#endif /* CONFIG_SMP */
-
 static void pmac_show_cpuinfo(struct seq_file *m)
 {
 	struct device_node *np;
@@ -341,34 +336,6 @@ static void __init pmac_setup_arch(void)
 		ROOT_DEV = DEFAULT_ROOT_DEVICE;
 #endif
 
-#ifdef CONFIG_SMP
-	/* Check for Core99 */
-	ic = of_find_node_by_name(NULL, "uni-n");
-	if (!ic)
-		ic = of_find_node_by_name(NULL, "u3");
-	if (!ic)
-		ic = of_find_node_by_name(NULL, "u4");
-	if (ic) {
-		of_node_put(ic);
-		smp_ops = &core99_smp_ops;
-	}
-#ifdef CONFIG_PPC32
-	else {
-		/*
-		 * We have to set bits in cpu_possible_map here since the
-		 * secondary CPU(s) aren't in the device tree, and
-		 * setup_per_cpu_areas only allocates per-cpu data for
-		 * CPUs in the cpu_possible_map.
-		 */
-		int cpu;
-
-		for (cpu = 1; cpu < 4 && cpu < NR_CPUS; ++cpu)
-			cpu_set(cpu, cpu_possible_map);
-		smp_ops = &psurge_smp_ops;
-	}
-#endif
-#endif /* CONFIG_SMP */
-
 #ifdef CONFIG_ADB
 	if (strstr(cmd_line, "adb_sync")) {
 		extern int __adb_probe_sync;
@@ -512,6 +479,14 @@ static void __init pmac_init_early(void)
 #ifdef CONFIG_PPC64
 	iommu_init_early_dart();
 #endif
+
+	/* SMP Init has to be done early as we need to patch up
+	 * cpu_possible_map before interrupt stacks are allocated
+	 * or kaboom...
+	 */
+#ifdef CONFIG_SMP
+	pmac_setup_smp();
+#endif
 }
 
 static int __init pmac_declare_of_platform_devices(void)
diff --git a/arch/powerpc/platforms/powermac/smp.c b/arch/powerpc/platforms/powermac/smp.c
index cf1dbe758890..6d4da7b46b41 100644
--- a/arch/powerpc/platforms/powermac/smp.c
+++ b/arch/powerpc/platforms/powermac/smp.c
@@ -64,10 +64,11 @@
 extern void __secondary_start_pmac_0(void);
 extern int pmac_pfunc_base_install(void);
 
-#ifdef CONFIG_PPC32
+static void (*pmac_tb_freeze)(int freeze);
+static u64 timebase;
+static int tb_req;
 
-/* Sync flag for HW tb sync */
-static volatile int sec_tb_reset = 0;
+#ifdef CONFIG_PPC32
 
 /*
  * Powersurge (old powermac SMP) support.
@@ -294,6 +295,9 @@ static int __init smp_psurge_probe(void)
 		psurge_quad_init();
 		/* All released cards using this HW design have 4 CPUs */
 		ncpus = 4;
+		/* No sure how timebase sync works on those, let's use SW */
+		smp_ops->give_timebase = smp_generic_give_timebase;
+		smp_ops->take_timebase = smp_generic_take_timebase;
 	} else {
 		iounmap(quad_base);
 		if ((in_8(hhead_base + HHEAD_CONFIG) & 0x02) == 0) {
@@ -308,18 +312,15 @@ static int __init smp_psurge_probe(void)
 	psurge_start = ioremap(PSURGE_START, 4);
 	psurge_pri_intr = ioremap(PSURGE_PRI_INTR, 4);
 
-	/*
-	 * This is necessary because OF doesn't know about the
+	/* This is necessary because OF doesn't know about the
 	 * secondary cpu(s), and thus there aren't nodes in the
 	 * device tree for them, and smp_setup_cpu_maps hasn't
-	 * set their bits in cpu_possible_map and cpu_present_map.
+	 * set their bits in cpu_present_map.
 	 */
 	if (ncpus > NR_CPUS)
 		ncpus = NR_CPUS;
-	for (i = 1; i < ncpus ; ++i) {
+	for (i = 1; i < ncpus ; ++i)
 		cpu_set(i, cpu_present_map);
-		set_hard_smp_processor_id(i, i);
-	}
 
 	if (ppc_md.progress) ppc_md.progress("smp_psurge_probe - done", 0x352);
 
@@ -329,8 +330,14 @@ static int __init smp_psurge_probe(void)
 static void __init smp_psurge_kick_cpu(int nr)
 {
 	unsigned long start = __pa(__secondary_start_pmac_0) + nr * 8;
-	unsigned long a;
-	int i;
+	unsigned long a, flags;
+	int i, j;
+
+	/* Defining this here is evil ... but I prefer hiding that
+	 * crap to avoid giving people ideas that they can do the
+	 * same.
+	 */
+	extern volatile unsigned int cpu_callin_map[NR_CPUS];
 
 	/* may need to flush here if secondary bats aren't setup */
 	for (a = KERNELBASE; a < KERNELBASE + 0x800000; a += 32)
@@ -339,47 +346,52 @@ static void __init smp_psurge_kick_cpu(int nr)
 
 	if (ppc_md.progress) ppc_md.progress("smp_psurge_kick_cpu", 0x353);
 
+	/* This is going to freeze the timeebase, we disable interrupts */
+	local_irq_save(flags);
+
 	out_be32(psurge_start, start);
 	mb();
 
 	psurge_set_ipi(nr);
+
 	/*
 	 * We can't use udelay here because the timebase is now frozen.
 	 */
 	for (i = 0; i < 2000; ++i)
-		barrier();
+		asm volatile("nop" : : : "memory");
 	psurge_clr_ipi(nr);
 
-	if (ppc_md.progress) ppc_md.progress("smp_psurge_kick_cpu - done", 0x354);
-}
-
-/*
- * With the dual-cpu powersurge board, the decrementers and timebases
- * of both cpus are frozen after the secondary cpu is started up,
- * until we give the secondary cpu another interrupt.  This routine
- * uses this to get the timebases synchronized.
- *  -- paulus.
- */
-static void __init psurge_dual_sync_tb(int cpu_nr)
-{
-	int t;
-
-	set_dec(tb_ticks_per_jiffy);
-	/* XXX fixme */
-	set_tb(0, 0);
-
-	if (cpu_nr > 0) {
+	/*
+	 * Also, because the timebase is frozen, we must not return to the
+	 * caller which will try to do udelay's etc... Instead, we wait -here-
+	 * for the CPU to callin.
+	 */
+	for (i = 0; i < 100000 && !cpu_callin_map[nr]; ++i) {
+		for (j = 1; j < 10000; j++)
+			asm volatile("nop" : : : "memory");
+		asm volatile("sync" : : : "memory");
+	}
+	if (!cpu_callin_map[nr])
+		goto stuck;
+
+	/* And we do the TB sync here too for standard dual CPU cards */
+	if (psurge_type == PSURGE_DUAL) {
+		while(!tb_req)
+			barrier();
+		tb_req = 0;
+		mb();
+		timebase = get_tb();
+		mb();
+		while (timebase)
+			barrier();
 		mb();
-		sec_tb_reset = 1;
-		return;
 	}
+ stuck:
+	/* now interrupt the secondary, restarting both TBs */
+	if (psurge_type == PSURGE_DUAL)
+		psurge_set_ipi(1);
 
-	/* wait for the secondary to have reset its TB before proceeding */
-	for (t = 10000000; t > 0 && !sec_tb_reset; --t)
-		;
-
-	/* now interrupt the secondary, starting both TBs */
-	psurge_set_ipi(1);
+	if (ppc_md.progress) ppc_md.progress("smp_psurge_kick_cpu - done", 0x354);
 }
 
 static struct irqaction psurge_irqaction = {
@@ -390,36 +402,35 @@ static struct irqaction psurge_irqaction = {
 
 static void __init smp_psurge_setup_cpu(int cpu_nr)
 {
+	if (cpu_nr != 0)
+		return;
 
-	if (cpu_nr == 0) {
-		/* If we failed to start the second CPU, we should still
-		 * send it an IPI to start the timebase & DEC or we might
-		 * have them stuck.
-		 */
-		if (num_online_cpus() < 2) {
-			if (psurge_type == PSURGE_DUAL)
-				psurge_set_ipi(1);
-			return;
-		}
-		/* reset the entry point so if we get another intr we won't
-		 * try to startup again */
-		out_be32(psurge_start, 0x100);
-		if (setup_irq(30, &psurge_irqaction))
-			printk(KERN_ERR "Couldn't get primary IPI interrupt");
-	}
-
-	if (psurge_type == PSURGE_DUAL)
-		psurge_dual_sync_tb(cpu_nr);
+	/* reset the entry point so if we get another intr we won't
+	 * try to startup again */
+	out_be32(psurge_start, 0x100);
+	if (setup_irq(30, &psurge_irqaction))
+		printk(KERN_ERR "Couldn't get primary IPI interrupt");
 }
 
 void __init smp_psurge_take_timebase(void)
 {
-	/* Dummy implementation */
+	if (psurge_type != PSURGE_DUAL)
+		return;
+
+	tb_req = 1;
+	mb();
+	while (!timebase)
+		barrier();
+	mb();
+	set_tb(timebase >> 32, timebase & 0xffffffff);
+	timebase = 0;
+	mb();
+	set_dec(tb_ticks_per_jiffy/2);
 }
 
 void __init smp_psurge_give_timebase(void)
 {
-	/* Dummy implementation */
+	/* Nothing to do here */
 }
 
 /* PowerSurge-style Macs */
@@ -437,9 +448,6 @@ struct smp_ops_t psurge_smp_ops = {
  * Core 99 and later support
  */
 
-static void (*pmac_tb_freeze)(int freeze);
-static u64 timebase;
-static int tb_req;
 
 static void smp_core99_give_timebase(void)
 {
@@ -478,7 +486,6 @@ static void __devinit smp_core99_take_timebase(void)
 	set_tb(timebase >> 32, timebase & 0xffffffff);
 	timebase = 0;
 	mb();
-	set_dec(tb_ticks_per_jiffy/2);
 
 	local_irq_restore(flags);
 }
@@ -920,3 +927,34 @@ struct smp_ops_t core99_smp_ops = {
 # endif
 #endif
 };
+
+void __init pmac_setup_smp(void)
+{
+	struct device_node *np;
+
+	/* Check for Core99 */
+	np = of_find_node_by_name(NULL, "uni-n");
+	if (!np)
+		np = of_find_node_by_name(NULL, "u3");
+	if (!np)
+		np = of_find_node_by_name(NULL, "u4");
+	if (np) {
+		of_node_put(np);
+		smp_ops = &core99_smp_ops;
+	}
+#ifdef CONFIG_PPC32
+	else {
+		/* We have to set bits in cpu_possible_map here since the
+		 * secondary CPU(s) aren't in the device tree. Various
+		 * things won't be initialized for CPUs not in the possible
+		 * map, so we really need to fix it up here.
+		 */
+		int cpu;
+
+		for (cpu = 1; cpu < 4 && cpu < NR_CPUS; ++cpu)
+			cpu_set(cpu, cpu_possible_map);
+		smp_ops = &psurge_smp_ops;
+	}
+#endif /* CONFIG_PPC32 */
+}
+
diff --git a/arch/powerpc/platforms/ps3/system-bus.c b/arch/powerpc/platforms/ps3/system-bus.c
index 9fead0faf38b..3f763c5284ac 100644
--- a/arch/powerpc/platforms/ps3/system-bus.c
+++ b/arch/powerpc/platforms/ps3/system-bus.c
@@ -284,7 +284,6 @@ static int ps3_sb_free_mmio_region(struct ps3_mmio_region *r)
 	int result;
 
 	dump_mmio_region(r);
-;
 	result = lv1_unmap_device_mmio_region(r->dev->bus_id, r->dev->dev_id,
 		r->lpar_addr);
 
diff --git a/arch/powerpc/platforms/pseries/lpar.c b/arch/powerpc/platforms/pseries/lpar.c
index e3139fa5e556..903eb9eec687 100644
--- a/arch/powerpc/platforms/pseries/lpar.c
+++ b/arch/powerpc/platforms/pseries/lpar.c
@@ -286,7 +286,7 @@ static long pSeries_lpar_hpte_insert(unsigned long hpte_group,
 	unsigned long hpte_v, hpte_r;
 
 	if (!(vflags & HPTE_V_BOLTED))
-		pr_debug("hpte_insert(group=%lx, va=%016lx, pa=%016lx, "
+		pr_devel("hpte_insert(group=%lx, va=%016lx, pa=%016lx, "
 			 "rflags=%lx, vflags=%lx, psize=%d)\n",
 			 hpte_group, va, pa, rflags, vflags, psize);
 
@@ -294,7 +294,7 @@ static long pSeries_lpar_hpte_insert(unsigned long hpte_group,
 	hpte_r = hpte_encode_r(pa, psize) | rflags;
 
 	if (!(vflags & HPTE_V_BOLTED))
-		pr_debug(" hpte_v=%016lx, hpte_r=%016lx\n", hpte_v, hpte_r);
+		pr_devel(" hpte_v=%016lx, hpte_r=%016lx\n", hpte_v, hpte_r);
 
 	/* Now fill in the actual HPTE */
 	/* Set CEC cookie to 0         */
@@ -311,7 +311,7 @@ static long pSeries_lpar_hpte_insert(unsigned long hpte_group,
 	lpar_rc = plpar_pte_enter(flags, hpte_group, hpte_v, hpte_r, &slot);
 	if (unlikely(lpar_rc == H_PTEG_FULL)) {
 		if (!(vflags & HPTE_V_BOLTED))
-			pr_debug(" full\n");
+			pr_devel(" full\n");
 		return -1;
 	}
 
@@ -322,11 +322,11 @@ static long pSeries_lpar_hpte_insert(unsigned long hpte_group,
 	 */
 	if (unlikely(lpar_rc != H_SUCCESS)) {
 		if (!(vflags & HPTE_V_BOLTED))
-			pr_debug(" lpar err %lu\n", lpar_rc);
+			pr_devel(" lpar err %lu\n", lpar_rc);
 		return -2;
 	}
 	if (!(vflags & HPTE_V_BOLTED))
-		pr_debug(" -> slot: %lu\n", slot & 7);
+		pr_devel(" -> slot: %lu\n", slot & 7);
 
 	/* Because of iSeries, we have to pass down the secondary
 	 * bucket bit here as well
@@ -418,17 +418,17 @@ static long pSeries_lpar_hpte_updatepp(unsigned long slot,
 
 	want_v = hpte_encode_avpn(va, psize, ssize);
 
-	pr_debug("    update: avpnv=%016lx, hash=%016lx, f=%lx, psize: %d ...",
+	pr_devel("    update: avpnv=%016lx, hash=%016lx, f=%lx, psize: %d ...",
 		 want_v, slot, flags, psize);
 
 	lpar_rc = plpar_pte_protect(flags, slot, want_v);
 
 	if (lpar_rc == H_NOT_FOUND) {
-		pr_debug("not found !\n");
+		pr_devel("not found !\n");
 		return -1;
 	}
 
-	pr_debug("ok\n");
+	pr_devel("ok\n");
 
 	BUG_ON(lpar_rc != H_SUCCESS);
 
@@ -503,7 +503,7 @@ static void pSeries_lpar_hpte_invalidate(unsigned long slot, unsigned long va,
 	unsigned long lpar_rc;
 	unsigned long dummy1, dummy2;
 
-	pr_debug("    inval : slot=%lx, va=%016lx, psize: %d, local: %d\n",
+	pr_devel("    inval : slot=%lx, va=%016lx, psize: %d, local: %d\n",
 		 slot, va, psize, local);
 
 	want_v = hpte_encode_avpn(va, psize, ssize);
diff --git a/arch/powerpc/platforms/pseries/smp.c b/arch/powerpc/platforms/pseries/smp.c
index 1a231c389ba0..1f8f6cfb94f7 100644
--- a/arch/powerpc/platforms/pseries/smp.c
+++ b/arch/powerpc/platforms/pseries/smp.c
@@ -35,7 +35,6 @@
 #include <asm/prom.h>
 #include <asm/smp.h>
 #include <asm/paca.h>
-#include <asm/time.h>
 #include <asm/machdep.h>
 #include <asm/cputable.h>
 #include <asm/firmware.h>
@@ -118,31 +117,6 @@ static void __devinit smp_xics_setup_cpu(int cpu)
 }
 #endif /* CONFIG_XICS */
 
-static DEFINE_SPINLOCK(timebase_lock);
-static unsigned long timebase = 0;
-
-static void __devinit pSeries_give_timebase(void)
-{
-	spin_lock(&timebase_lock);
-	rtas_call(rtas_token("freeze-time-base"), 0, 1, NULL);
-	timebase = get_tb();
-	spin_unlock(&timebase_lock);
-
-	while (timebase)
-		barrier();
-	rtas_call(rtas_token("thaw-time-base"), 0, 1, NULL);
-}
-
-static void __devinit pSeries_take_timebase(void)
-{
-	while (!timebase)
-		barrier();
-	spin_lock(&timebase_lock);
-	set_tb(timebase >> 32, timebase & 0xffffffff);
-	timebase = 0;
-	spin_unlock(&timebase_lock);
-}
-
 static void __devinit smp_pSeries_kick_cpu(int nr)
 {
 	BUG_ON(nr < 0 || nr >= NR_CPUS);
@@ -209,8 +183,8 @@ static void __init smp_init_pseries(void)
 
 	/* Non-lpar has additional take/give timebase */
 	if (rtas_token("freeze-time-base") != RTAS_UNKNOWN_SERVICE) {
-		smp_ops->give_timebase = pSeries_give_timebase;
-		smp_ops->take_timebase = pSeries_take_timebase;
+		smp_ops->give_timebase = rtas_give_timebase;
+		smp_ops->take_timebase = rtas_take_timebase;
 	}
 
 	pr_debug(" <- smp_init_pSeries()\n");
diff --git a/arch/powerpc/platforms/pseries/xics.c b/arch/powerpc/platforms/pseries/xics.c
index be3581a8c294..419f8a637ffe 100644
--- a/arch/powerpc/platforms/pseries/xics.c
+++ b/arch/powerpc/platforms/pseries/xics.c
@@ -190,10 +190,10 @@ static void xics_unmask_irq(unsigned int virq)
 	int call_status;
 	int server;
 
-	pr_debug("xics: unmask virq %d\n", virq);
+	pr_devel("xics: unmask virq %d\n", virq);
 
 	irq = (unsigned int)irq_map[virq].hwirq;
-	pr_debug(" -> map to hwirq 0x%x\n", irq);
+	pr_devel(" -> map to hwirq 0x%x\n", irq);
 	if (irq == XICS_IPI || irq == XICS_IRQ_SPURIOUS)
 		return;
 
@@ -252,7 +252,7 @@ static void xics_mask_irq(unsigned int virq)
 {
 	unsigned int irq;
 
-	pr_debug("xics: mask virq %d\n", virq);
+	pr_devel("xics: mask virq %d\n", virq);
 
 	irq = (unsigned int)irq_map[virq].hwirq;
 	if (irq == XICS_IPI || irq == XICS_IRQ_SPURIOUS)
@@ -414,7 +414,7 @@ static int xics_host_match(struct irq_host *h, struct device_node *node)
 static int xics_host_map(struct irq_host *h, unsigned int virq,
 			 irq_hw_number_t hw)
 {
-	pr_debug("xics: map virq %d, hwirq 0x%lx\n", virq, hw);
+	pr_devel("xics: map virq %d, hwirq 0x%lx\n", virq, hw);
 
 	/* Insert the interrupt mapping into the radix tree for fast lookup */
 	irq_radix_revmap_insert(xics_host, virq, hw);
diff --git a/arch/powerpc/sysdev/fsl_rio.c b/arch/powerpc/sysdev/fsl_rio.c
index 39db9d1155d2..cbb3bed75d3c 100644
--- a/arch/powerpc/sysdev/fsl_rio.c
+++ b/arch/powerpc/sysdev/fsl_rio.c
@@ -965,7 +965,7 @@ static inline void fsl_rio_info(struct device *dev, u32 ccsr)
 			break;
 		default:
 			str = "Unknown";
-			break;;
+			break;
 		}
 		dev_info(dev, "Hardware port width: %s\n", str);
 
diff --git a/arch/powerpc/sysdev/ipic.c b/arch/powerpc/sysdev/ipic.c
index a86d3ce01ead..69e2630c9062 100644
--- a/arch/powerpc/sysdev/ipic.c
+++ b/arch/powerpc/sysdev/ipic.c
@@ -728,12 +728,10 @@ struct ipic * __init ipic_init(struct device_node *node, unsigned int flags)
 	if (ret)
 		return NULL;
 
-	ipic = alloc_bootmem(sizeof(struct ipic));
+	ipic = kzalloc(sizeof(*ipic), GFP_KERNEL);
 	if (ipic == NULL)
 		return NULL;
 
-	memset(ipic, 0, sizeof(struct ipic));
-
 	ipic->irqhost = irq_alloc_host(node, IRQ_HOST_MAP_LINEAR,
 				       NR_IPIC_INTS,
 				       &ipic_host_ops, 0);
diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c
index 9c3af5045495..3981ae4cb58e 100644
--- a/arch/powerpc/sysdev/mpic.c
+++ b/arch/powerpc/sysdev/mpic.c
@@ -279,28 +279,29 @@ static void _mpic_map_mmio(struct mpic *mpic, phys_addr_t phys_addr,
 }
 
 #ifdef CONFIG_PPC_DCR
-static void _mpic_map_dcr(struct mpic *mpic, struct mpic_reg_bank *rb,
+static void _mpic_map_dcr(struct mpic *mpic, struct device_node *node,
+			  struct mpic_reg_bank *rb,
 			  unsigned int offset, unsigned int size)
 {
 	const u32 *dbasep;
 
-	dbasep = of_get_property(mpic->irqhost->of_node, "dcr-reg", NULL);
+	dbasep = of_get_property(node, "dcr-reg", NULL);
 
-	rb->dhost = dcr_map(mpic->irqhost->of_node, *dbasep + offset, size);
+	rb->dhost = dcr_map(node, *dbasep + offset, size);
 	BUG_ON(!DCR_MAP_OK(rb->dhost));
 }
 
-static inline void mpic_map(struct mpic *mpic, phys_addr_t phys_addr,
-			    struct mpic_reg_bank *rb, unsigned int offset,
-			    unsigned int size)
+static inline void mpic_map(struct mpic *mpic, struct device_node *node,
+			    phys_addr_t phys_addr, struct mpic_reg_bank *rb,
+			    unsigned int offset, unsigned int size)
 {
 	if (mpic->flags & MPIC_USES_DCR)
-		_mpic_map_dcr(mpic, rb, offset, size);
+		_mpic_map_dcr(mpic, node, rb, offset, size);
 	else
 		_mpic_map_mmio(mpic, phys_addr, rb, offset, size);
 }
 #else /* CONFIG_PPC_DCR */
-#define mpic_map(m,p,b,o,s)	_mpic_map_mmio(m,p,b,o,s)
+#define mpic_map(m,n,p,b,o,s)	_mpic_map_mmio(m,p,b,o,s)
 #endif /* !CONFIG_PPC_DCR */
 
 
@@ -507,9 +508,8 @@ static void __init mpic_scan_ht_pics(struct mpic *mpic)
 	printk(KERN_INFO "mpic: Setting up HT PICs workarounds for U3/U4\n");
 
 	/* Allocate fixups array */
-	mpic->fixups = alloc_bootmem(128 * sizeof(struct mpic_irq_fixup));
+	mpic->fixups = kzalloc(128 * sizeof(*mpic->fixups), GFP_KERNEL);
 	BUG_ON(mpic->fixups == NULL);
-	memset(mpic->fixups, 0, 128 * sizeof(struct mpic_irq_fixup));
 
 	/* Init spinlock */
 	spin_lock_init(&mpic->fixup_lock);
@@ -1052,11 +1052,10 @@ struct mpic * __init mpic_alloc(struct device_node *node,
 	int		intvec_top;
 	u64		paddr = phys_addr;
 
-	mpic = alloc_bootmem(sizeof(struct mpic));
+	mpic = kzalloc(sizeof(struct mpic), GFP_KERNEL);
 	if (mpic == NULL)
 		return NULL;
-	
-	memset(mpic, 0, sizeof(struct mpic));
+
 	mpic->name = name;
 
 	mpic->hc_irq = mpic_irq_chip;
@@ -1109,9 +1108,8 @@ struct mpic * __init mpic_alloc(struct device_node *node,
 			psize /= 4;
 			bits = intvec_top + 1;
 			mapsize = BITS_TO_LONGS(bits) * sizeof(unsigned long);
-			mpic->protected = alloc_bootmem(mapsize);
+			mpic->protected = kzalloc(mapsize, GFP_KERNEL);
 			BUG_ON(mpic->protected == NULL);
-			memset(mpic->protected, 0, mapsize);
 			for (i = 0; i < psize; i++) {
 				if (psrc[i] > intvec_top)
 					continue;
@@ -1152,8 +1150,8 @@ struct mpic * __init mpic_alloc(struct device_node *node,
 	}
 
 	/* Map the global registers */
-	mpic_map(mpic, paddr, &mpic->gregs, MPIC_INFO(GREG_BASE), 0x1000);
-	mpic_map(mpic, paddr, &mpic->tmregs, MPIC_INFO(TIMER_BASE), 0x1000);
+	mpic_map(mpic, node, paddr, &mpic->gregs, MPIC_INFO(GREG_BASE), 0x1000);
+	mpic_map(mpic, node, paddr, &mpic->tmregs, MPIC_INFO(TIMER_BASE), 0x1000);
 
 	/* Reset */
 	if (flags & MPIC_WANTS_RESET) {
@@ -1194,7 +1192,7 @@ struct mpic * __init mpic_alloc(struct device_node *node,
 
 	/* Map the per-CPU registers */
 	for (i = 0; i < mpic->num_cpus; i++) {
-		mpic_map(mpic, paddr, &mpic->cpuregs[i],
+		mpic_map(mpic, node, paddr, &mpic->cpuregs[i],
 			 MPIC_INFO(CPU_BASE) + i * MPIC_INFO(CPU_STRIDE),
 			 0x1000);
 	}
@@ -1202,7 +1200,7 @@ struct mpic * __init mpic_alloc(struct device_node *node,
 	/* Initialize main ISU if none provided */
 	if (mpic->isu_size == 0) {
 		mpic->isu_size = mpic->num_sources;
-		mpic_map(mpic, paddr, &mpic->isus[0],
+		mpic_map(mpic, node, paddr, &mpic->isus[0],
 			 MPIC_INFO(IRQ_BASE), MPIC_INFO(IRQ_STRIDE) * mpic->isu_size);
 	}
 	mpic->isu_shift = 1 + __ilog2(mpic->isu_size - 1);
@@ -1256,8 +1254,10 @@ void __init mpic_assign_isu(struct mpic *mpic, unsigned int isu_num,
 
 	BUG_ON(isu_num >= MPIC_MAX_ISU);
 
-	mpic_map(mpic, paddr, &mpic->isus[isu_num], 0,
+	mpic_map(mpic, mpic->irqhost->of_node,
+		 paddr, &mpic->isus[isu_num], 0,
 		 MPIC_INFO(IRQ_STRIDE) * mpic->isu_size);
+
 	if ((isu_first + mpic->isu_size) > mpic->num_sources)
 		mpic->num_sources = isu_first + mpic->isu_size;
 }
@@ -1351,7 +1351,8 @@ void __init mpic_init(struct mpic *mpic)
 
 #ifdef CONFIG_PM
 	/* allocate memory to save mpic state */
-	mpic->save_data = alloc_bootmem(mpic->num_sources * sizeof(struct mpic_irq_save));
+	mpic->save_data = kmalloc(mpic->num_sources * sizeof(*mpic->save_data),
+				  GFP_KERNEL);
 	BUG_ON(mpic->save_data == NULL);
 #endif
 }
diff --git a/arch/powerpc/sysdev/ppc4xx_pci.c b/arch/powerpc/sysdev/ppc4xx_pci.c
index daefc93ddffe..6ff9d71b4c0d 100644
--- a/arch/powerpc/sysdev/ppc4xx_pci.c
+++ b/arch/powerpc/sysdev/ppc4xx_pci.c
@@ -1531,7 +1531,7 @@ static void __init ppc4xx_configure_pciex_PIMs(struct ppc4xx_pciex_port *port,
 		 */
 
 		/* Calculate window size */
-		sa = (0xffffffffffffffffull << ilog2(ep_size));;
+		sa = (0xffffffffffffffffull << ilog2(ep_size));
 
 		/* Setup BAR0 */
 		out_le32(mbase + PECFG_BAR0HMPA, RES_TO_U32_HIGH(sa));
@@ -1550,7 +1550,7 @@ static void __init ppc4xx_configure_pciex_PIMs(struct ppc4xx_pciex_port *port,
 		out_le32(mbase + PCI_BASE_ADDRESS_1, RES_TO_U32_HIGH(ep_addr));
 	} else {
 		/* Calculate window size */
-		sa = (0xffffffffffffffffull << ilog2(size));;
+		sa = (0xffffffffffffffffull << ilog2(size));
 		if (res->flags & IORESOURCE_PREFETCH)
 			sa |= 0x8;
 
diff --git a/arch/powerpc/sysdev/qe_lib/qe.c b/arch/powerpc/sysdev/qe_lib/qe.c
index b28b0e512d67..237e3654f48c 100644
--- a/arch/powerpc/sysdev/qe_lib/qe.c
+++ b/arch/powerpc/sysdev/qe_lib/qe.c
@@ -112,6 +112,7 @@ int qe_issue_cmd(u32 cmd, u32 device, u8 mcn_protocol, u32 cmd_input)
 {
 	unsigned long flags;
 	u8 mcn_shift = 0, dev_shift = 0;
+	u32 ret;
 
 	spin_lock_irqsave(&qe_lock, flags);
 	if (cmd == QE_RESET) {
@@ -139,11 +140,13 @@ int qe_issue_cmd(u32 cmd, u32 device, u8 mcn_protocol, u32 cmd_input)
 	}
 
 	/* wait for the QE_CR_FLG to clear */
-	while(in_be32(&qe_immr->cp.cecr) & QE_CR_FLG)
-		cpu_relax();
+	ret = spin_event_timeout((in_be32(&qe_immr->cp.cecr) & QE_CR_FLG) == 0,
+			   100, 0);
+	/* On timeout (e.g. failure), the expression will be false (ret == 0),
+	   otherwise it will be true (ret == 1). */
 	spin_unlock_irqrestore(&qe_lock, flags);
 
-	return 0;
+	return ret == 1;
 }
 EXPORT_SYMBOL(qe_issue_cmd);
 
diff --git a/arch/powerpc/sysdev/qe_lib/qe_ic.c b/arch/powerpc/sysdev/qe_lib/qe_ic.c
index 63cdf9887f36..074905c3ee5a 100644
--- a/arch/powerpc/sysdev/qe_lib/qe_ic.c
+++ b/arch/powerpc/sysdev/qe_lib/qe_ic.c
@@ -333,12 +333,10 @@ void __init qe_ic_init(struct device_node *node, unsigned int flags,
 	if (ret)
 		return;
 
-	qe_ic = alloc_bootmem(sizeof(struct qe_ic));
+	qe_ic = kzalloc(sizeof(*qe_ic), GFP_KERNEL);
 	if (qe_ic == NULL)
 		return;
 
-	memset(qe_ic, 0, sizeof(struct qe_ic));
-
 	qe_ic->irqhost = irq_alloc_host(node, IRQ_HOST_MAP_LINEAR,
 					NR_QE_IC_INTS, &qe_ic_host_ops, 0);
 	if (qe_ic->irqhost == NULL)
diff --git a/arch/powerpc/sysdev/uic.c b/arch/powerpc/sysdev/uic.c
index d35405c59434..466ce9ace127 100644
--- a/arch/powerpc/sysdev/uic.c
+++ b/arch/powerpc/sysdev/uic.c
@@ -258,11 +258,10 @@ static struct uic * __init uic_init_one(struct device_node *node)
 
 	BUG_ON(! of_device_is_compatible(node, "ibm,uic"));
 
-	uic = alloc_bootmem(sizeof(*uic));
+	uic = kzalloc(sizeof(*uic), GFP_KERNEL);
 	if (! uic)
 		return NULL; /* FIXME: panic? */
 
-	memset(uic, 0, sizeof(*uic));
 	spin_lock_init(&uic->lock);
 	indexp = of_get_property(node, "cell-index", &len);
 	if (!indexp || (len != sizeof(u32))) {
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index e577839f3073..2ae5d72f47ed 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -95,6 +95,11 @@ config S390
 	select HAVE_ARCH_TRACEHOOK
 	select INIT_ALL_POSSIBLE
 	select HAVE_PERF_COUNTERS
+	select GENERIC_ATOMIC64 if !64BIT
+
+config SCHED_OMIT_FRAME_POINTER
+	bool
+	default y
 
 source "init/Kconfig"
 
@@ -116,6 +121,9 @@ config 32BIT
 	bool
 	default y if !64BIT
 
+config KTIME_SCALAR
+	def_bool 32BIT
+
 config SMP
 	bool "Symmetric multi-processing support"
 	---help---
diff --git a/arch/s390/include/asm/atomic.h b/arch/s390/include/asm/atomic.h
index fca9dffcc669..c7d0abfb0f00 100644
--- a/arch/s390/include/asm/atomic.h
+++ b/arch/s390/include/asm/atomic.h
@@ -268,7 +268,12 @@ static __inline__ int atomic64_add_unless(atomic64_t *v,
 #define atomic64_inc_not_zero(v) atomic64_add_unless((v), 1, 0)
 
 #undef __CSG_LOOP
-#endif
+
+#else /* __s390x__ */
+
+#include <asm-generic/atomic64.h>
+
+#endif /* __s390x__ */
 
 #define smp_mb__before_atomic_dec()	smp_mb()
 #define smp_mb__after_atomic_dec()	smp_mb()
diff --git a/arch/s390/include/asm/kvm_host.h b/arch/s390/include/asm/kvm_host.h
index a27d0d5a6f86..1cd02f6073a0 100644
--- a/arch/s390/include/asm/kvm_host.h
+++ b/arch/s390/include/asm/kvm_host.h
@@ -99,7 +99,9 @@ struct kvm_s390_sie_block {
 	__u8	reservedd0[48];		/* 0x00d0 */
 	__u64	gcr[16];		/* 0x0100 */
 	__u64	gbea;			/* 0x0180 */
-	__u8	reserved188[120];	/* 0x0188 */
+	__u8	reserved188[24];	/* 0x0188 */
+	__u32	fac;			/* 0x01a0 */
+	__u8	reserved1a4[92];	/* 0x01a4 */
 } __attribute__((packed));
 
 struct kvm_vcpu_stat {
diff --git a/arch/s390/include/asm/perf_counter.h b/arch/s390/include/asm/perf_counter.h
index a7205a3828cb..7015188c2cc2 100644
--- a/arch/s390/include/asm/perf_counter.h
+++ b/arch/s390/include/asm/perf_counter.h
@@ -6,3 +6,5 @@
 
 static inline void set_perf_counter_pending(void) {}
 static inline void clear_perf_counter_pending(void) {}
+
+#define PERF_COUNTER_INDEX_OFFSET 0
diff --git a/arch/s390/include/asm/thread_info.h b/arch/s390/include/asm/thread_info.h
index 925bcc649035..ba1cab9fc1f9 100644
--- a/arch/s390/include/asm/thread_info.h
+++ b/arch/s390/include/asm/thread_info.h
@@ -61,7 +61,7 @@ struct thread_info {
 	.exec_domain	= &default_exec_domain,	\
 	.flags		= 0,			\
 	.cpu		= 0,			\
-	.preempt_count	= 1,			\
+	.preempt_count	= INIT_PREEMPT_COUNT,	\
 	.restart_block	= {			\
 		.fn = do_no_restart_syscall,	\
 	},					\
diff --git a/arch/s390/kernel/ipl.c b/arch/s390/kernel/ipl.c
index b8bf4b140065..371a2d88f4ac 100644
--- a/arch/s390/kernel/ipl.c
+++ b/arch/s390/kernel/ipl.c
@@ -70,6 +70,7 @@ struct shutdown_action {
 	char *name;
 	void (*fn) (struct shutdown_trigger *trigger);
 	int (*init) (void);
+	int init_rc;
 };
 
 static char *ipl_type_str(enum ipl_type type)
@@ -1486,11 +1487,13 @@ static int set_trigger(const char *buf, struct shutdown_trigger *trigger,
 	int i;
 
 	for (i = 0; i < SHUTDOWN_ACTIONS_COUNT; i++) {
-		if (!shutdown_actions_list[i])
-			continue;
 		if (sysfs_streq(buf, shutdown_actions_list[i]->name)) {
-			trigger->action = shutdown_actions_list[i];
-			return len;
+			if (shutdown_actions_list[i]->init_rc) {
+				return shutdown_actions_list[i]->init_rc;
+			} else {
+				trigger->action = shutdown_actions_list[i];
+				return len;
+			}
 		}
 	}
 	return -EINVAL;
@@ -1640,8 +1643,8 @@ static void __init shutdown_actions_init(void)
 	for (i = 0; i < SHUTDOWN_ACTIONS_COUNT; i++) {
 		if (!shutdown_actions_list[i]->init)
 			continue;
-		if (shutdown_actions_list[i]->init())
-			shutdown_actions_list[i] = NULL;
+		shutdown_actions_list[i]->init_rc =
+			shutdown_actions_list[i]->init();
 	}
 }
 
diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c
index c18b21d6991c..90d9d1ba258b 100644
--- a/arch/s390/kvm/kvm-s390.c
+++ b/arch/s390/kvm/kvm-s390.c
@@ -25,6 +25,7 @@
 #include <asm/lowcore.h>
 #include <asm/pgtable.h>
 #include <asm/nmi.h>
+#include <asm/system.h>
 #include "kvm-s390.h"
 #include "gaccess.h"
 
@@ -69,6 +70,7 @@ struct kvm_stats_debugfs_item debugfs_entries[] = {
 	{ NULL }
 };
 
+static unsigned long long *facilities;
 
 /* Section: not file related */
 void kvm_arch_hardware_enable(void *garbage)
@@ -288,6 +290,7 @@ int kvm_arch_vcpu_setup(struct kvm_vcpu *vcpu)
 	vcpu->arch.sie_block->gmsor = vcpu->kvm->arch.guest_origin;
 	vcpu->arch.sie_block->ecb   = 2;
 	vcpu->arch.sie_block->eca   = 0xC1002001U;
+	vcpu->arch.sie_block->fac   = (int) (long) facilities;
 	hrtimer_init(&vcpu->arch.ckc_timer, CLOCK_REALTIME, HRTIMER_MODE_ABS);
 	tasklet_init(&vcpu->arch.tasklet, kvm_s390_tasklet,
 		     (unsigned long) vcpu);
@@ -739,11 +742,29 @@ gfn_t unalias_gfn(struct kvm *kvm, gfn_t gfn)
 
 static int __init kvm_s390_init(void)
 {
-	return kvm_init(NULL, sizeof(struct kvm_vcpu), THIS_MODULE);
+	int ret;
+	ret = kvm_init(NULL, sizeof(struct kvm_vcpu), THIS_MODULE);
+	if (ret)
+		return ret;
+
+	/*
+	 * guests can ask for up to 255+1 double words, we need a full page
+	 * to hold the maximum amount of facilites. On the other hand, we
+	 * only set facilities that are known to work in KVM.
+	 */
+	facilities = (unsigned long long *) get_zeroed_page(GFP_DMA);
+	if (!facilities) {
+		kvm_exit();
+		return -ENOMEM;
+	}
+	stfle(facilities, 1);
+	facilities[0] &= 0xff00fff3f0700000ULL;
+	return 0;
 }
 
 static void __exit kvm_s390_exit(void)
 {
+	free_page((unsigned long) facilities);
 	kvm_exit();
 }
 
diff --git a/arch/s390/kvm/priv.c b/arch/s390/kvm/priv.c
index 93ecd06e1a74..d426aac8095d 100644
--- a/arch/s390/kvm/priv.c
+++ b/arch/s390/kvm/priv.c
@@ -158,7 +158,7 @@ static int handle_stfl(struct kvm_vcpu *vcpu)
 
 	vcpu->stat.instruction_stfl++;
 	/* only pass the facility bits, which we can handle */
-	facility_list &= 0xfe00fff3;
+	facility_list &= 0xff00fff3;
 
 	rc = copy_to_guest(vcpu, offsetof(struct _lowcore, stfl_fac_list),
 			   &facility_list, sizeof(facility_list));
diff --git a/arch/s390/lib/Makefile b/arch/s390/lib/Makefile
index ab6735df2d21..97975ec7a274 100644
--- a/arch/s390/lib/Makefile
+++ b/arch/s390/lib/Makefile
@@ -3,6 +3,6 @@
 #
 
 lib-y += delay.o string.o uaccess_std.o uaccess_pt.o
-obj-$(CONFIG_32BIT) += div64.o qrnnd.o
+obj-$(CONFIG_32BIT) += div64.o qrnnd.o ucmpdi2.o
 lib-$(CONFIG_64BIT) += uaccess_mvcos.o
 lib-$(CONFIG_SMP) += spinlock.o
diff --git a/arch/s390/lib/delay.c b/arch/s390/lib/delay.c
index 3f5f680726ed..97c1eca83cc2 100644
--- a/arch/s390/lib/delay.c
+++ b/arch/s390/lib/delay.c
@@ -36,9 +36,11 @@ static void __udelay_disabled(unsigned long usecs)
 	cr0 = (cr0_saved & 0xffff00e0) | 0x00000800;
 	__ctl_load(cr0 , 0, 0);
 	mask = psw_kernel_bits | PSW_MASK_WAIT | PSW_MASK_EXT;
+	lockdep_off();
 	trace_hardirqs_on();
 	__load_psw_mask(mask);
 	local_irq_disable();
+	lockdep_on();
 	__ctl_load(cr0_saved, 0, 0);
 	local_tick_enable(clock_saved);
 	set_clock_comparator(S390_lowcore.clock_comparator);
diff --git a/arch/s390/lib/ucmpdi2.c b/arch/s390/lib/ucmpdi2.c
new file mode 100644
index 000000000000..3e05ff532582
--- /dev/null
+++ b/arch/s390/lib/ucmpdi2.c
@@ -0,0 +1,26 @@
+#include <linux/module.h>
+
+union ull_union {
+	unsigned long long ull;
+	struct {
+		unsigned int high;
+		unsigned int low;
+	} ui;
+};
+
+int __ucmpdi2(unsigned long long a, unsigned long long b)
+{
+	union ull_union au = {.ull = a};
+	union ull_union bu = {.ull = b};
+
+	if (au.ui.high < bu.ui.high)
+		return 0;
+	else if (au.ui.high > bu.ui.high)
+		return 2;
+	if (au.ui.low < bu.ui.low)
+		return 0;
+	else if (au.ui.low > bu.ui.low)
+		return 2;
+	return 1;
+}
+EXPORT_SYMBOL(__ucmpdi2);
diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug
index 8ece0b5bd028..39224b57c6ef 100644
--- a/arch/sh/Kconfig.debug
+++ b/arch/sh/Kconfig.debug
@@ -61,10 +61,6 @@ config EARLY_PRINTK
 	  select both the EARLY_SCIF_CONSOLE and SH_STANDARD_BIOS, using
 	  the kernel command line option to toggle back and forth.
 
-config DEBUG_BOOTMEM
-	depends on DEBUG_KERNEL
-	bool "Debug BOOTMEM initialization"
-
 config DEBUG_STACKOVERFLOW
 	bool "Check for stack overflows"
 	depends on DEBUG_KERNEL && SUPERH32
diff --git a/arch/sh/boards/mach-se/7206/io.c b/arch/sh/boards/mach-se/7206/io.c
index 9c3a33210d61..180455642a43 100644
--- a/arch/sh/boards/mach-se/7206/io.c
+++ b/arch/sh/boards/mach-se/7206/io.c
@@ -50,7 +50,7 @@ unsigned char se7206_inb_p(unsigned long port)
 
 unsigned short se7206_inw(unsigned long port)
 {
-	return *port2adr(port);;
+	return *port2adr(port);
 }
 
 void se7206_outb(unsigned char value, unsigned long port)
diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c
index 9cd04bd558b8..8fed45a2fb85 100644
--- a/arch/sh/boards/mach-se/7724/setup.c
+++ b/arch/sh/boards/mach-se/7724/setup.c
@@ -19,10 +19,13 @@
 #include <linux/smc91x.h>
 #include <linux/gpio.h>
 #include <linux/input.h>
+#include <linux/usb/r8a66597.h>
 #include <video/sh_mobile_lcdc.h>
 #include <media/sh_mobile_ceu.h>
 #include <asm/io.h>
 #include <asm/heartbeat.h>
+#include <asm/sh_eth.h>
+#include <asm/clock.h>
 #include <asm/sh_keysc.h>
 #include <cpu/sh7724.h>
 #include <mach-se/mach/se7724.h>
@@ -272,6 +275,62 @@ static struct platform_device keysc_device = {
 	},
 };
 
+/* SH Eth */
+static struct resource sh_eth_resources[] = {
+	[0] = {
+		.start = SH_ETH_ADDR,
+		.end   = SH_ETH_ADDR + 0x1FC,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = 91,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	},
+};
+
+struct sh_eth_plat_data sh_eth_plat = {
+	.phy = 0x1f, /* SMSC LAN8187 */
+	.edmac_endian = EDMAC_LITTLE_ENDIAN,
+};
+
+static struct platform_device sh_eth_device = {
+	.name = "sh-eth",
+	.id	= 0,
+	.dev = {
+		.platform_data = &sh_eth_plat,
+	},
+	.num_resources = ARRAY_SIZE(sh_eth_resources),
+	.resource = sh_eth_resources,
+};
+
+static struct r8a66597_platdata sh7724_usb0_host_data = {
+};
+
+static struct resource sh7724_usb0_host_resources[] = {
+	[0] = {
+		.start	= 0xa4d80000,
+		.end	= 0xa4d800ff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 65,
+		.end	= 65,
+		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
+	},
+};
+
+static struct platform_device sh7724_usb0_host_device = {
+	.name		= "r8a66597_hcd",
+	.id		= 0,
+	.dev = {
+		.dma_mask		= NULL,         /*  not use dma */
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &sh7724_usb0_host_data,
+	},
+	.num_resources	= ARRAY_SIZE(sh7724_usb0_host_resources),
+	.resource	= sh7724_usb0_host_resources,
+};
+
 static struct platform_device *ms7724se_devices[] __initdata = {
 	&heartbeat_device,
 	&smc91x_eth_device,
@@ -280,11 +339,62 @@ static struct platform_device *ms7724se_devices[] __initdata = {
 	&ceu0_device,
 	&ceu1_device,
 	&keysc_device,
+	&sh_eth_device,
+	&sh7724_usb0_host_device,
 };
 
+#define EEPROM_OP   0xBA206000
+#define EEPROM_ADR  0xBA206004
+#define EEPROM_DATA 0xBA20600C
+#define EEPROM_STAT 0xBA206010
+#define EEPROM_STRT 0xBA206014
+static int __init sh_eth_is_eeprom_ready(void)
+{
+	int t = 10000;
+
+	while (t--) {
+		if (!ctrl_inw(EEPROM_STAT))
+			return 1;
+		cpu_relax();
+	}
+
+	printk(KERN_ERR "ms7724se can not access to eeprom\n");
+	return 0;
+}
+
+static void __init sh_eth_init(void)
+{
+	int i;
+	u16 mac[3];
+
+	/* check EEPROM status */
+	if (!sh_eth_is_eeprom_ready())
+		return;
+
+	/* read MAC addr from EEPROM */
+	for (i = 0 ; i < 3 ; i++) {
+		ctrl_outw(0x0, EEPROM_OP); /* read */
+		ctrl_outw(i*2, EEPROM_ADR);
+		ctrl_outw(0x1, EEPROM_STRT);
+		if (!sh_eth_is_eeprom_ready())
+			return;
+
+		mac[i] = ctrl_inw(EEPROM_DATA);
+		mac[i] = ((mac[i] & 0xFF) << 8) | (mac[i] >> 8); /* swap */
+	}
+
+	/* reset sh-eth */
+	ctrl_outl(0x1, SH_ETH_ADDR + 0x0);
+
+	/* set MAC addr */
+	ctrl_outl(((mac[0] << 16) | (mac[1])), SH_ETH_MAHR);
+	ctrl_outl((mac[2]), SH_ETH_MALR);
+}
+
 #define SW4140    0xBA201000
 #define FPGA_OUT  0xBA200400
 #define PORT_HIZA 0xA4050158
+#define PORT_MSELCRB 0xA4050182
 
 #define SW41_A    0x0100
 #define SW41_B    0x0200
@@ -294,6 +404,7 @@ static struct platform_device *ms7724se_devices[] __initdata = {
 #define SW41_F    0x2000
 #define SW41_G    0x4000
 #define SW41_H    0x8000
+
 static int __init devices_setup(void)
 {
 	u16 sw = ctrl_inw(SW4140); /* select camera, monitor */
@@ -302,9 +413,16 @@ static int __init devices_setup(void)
 	ctrl_outw(ctrl_inw(FPGA_OUT) &
 		  ~((1 << 1)  | /* LAN */
 		    (1 << 6)  | /* VIDEO DAC */
-		    (1 << 12)), /* USB0 */
+		    (1 << 12) | /* USB0 */
+		    (1 << 14)), /* RMII */
 		  FPGA_OUT);
 
+	/* turn on USB clocks, use external clock */
+	ctrl_outw((ctrl_inw(PORT_MSELCRB) & ~0xc000) | 0x8000, PORT_MSELCRB);
+
+	/* enable USB0 port */
+	ctrl_outw(0x0600, 0xa40501d4);
+
 	/* enable IRQ 0,1,2 */
 	gpio_request(GPIO_FN_INTC_IRQ0, NULL);
 	gpio_request(GPIO_FN_INTC_IRQ1, NULL);
@@ -374,7 +492,7 @@ static int __init devices_setup(void)
 	gpio_request(GPIO_FN_VIO0_CLK, NULL);
 	gpio_request(GPIO_FN_VIO0_FLD, NULL);
 	gpio_request(GPIO_FN_VIO0_HD,  NULL);
-	platform_resource_setup_memory(&ceu0_device, "ceu", 4 << 20);
+	platform_resource_setup_memory(&ceu0_device, "ceu0", 4 << 20);
 
 	/* enable CEU1 */
 	gpio_request(GPIO_FN_VIO1_D7,  NULL);
@@ -389,7 +507,7 @@ static int __init devices_setup(void)
 	gpio_request(GPIO_FN_VIO1_HD,  NULL);
 	gpio_request(GPIO_FN_VIO1_VD,  NULL);
 	gpio_request(GPIO_FN_VIO1_CLK, NULL);
-	platform_resource_setup_memory(&ceu1_device, "ceu", 4 << 20);
+	platform_resource_setup_memory(&ceu1_device, "ceu1", 4 << 20);
 
 	/* KEYSC */
 	gpio_request(GPIO_FN_KEYOUT5_IN5, NULL);
@@ -404,6 +522,28 @@ static int __init devices_setup(void)
 	gpio_request(GPIO_FN_KEYOUT1,     NULL);
 	gpio_request(GPIO_FN_KEYOUT0,     NULL);
 
+	/*
+	 * enable SH-Eth
+	 *
+	 * please remove J33 pin from your board !!
+	 *
+	 * ms7724 board should not use GPIO_FN_LNKSTA pin
+	 * So, This time PTX5 is set to input pin
+	 */
+	gpio_request(GPIO_FN_RMII_RXD0,    NULL);
+	gpio_request(GPIO_FN_RMII_RXD1,    NULL);
+	gpio_request(GPIO_FN_RMII_TXD0,    NULL);
+	gpio_request(GPIO_FN_RMII_TXD1,    NULL);
+	gpio_request(GPIO_FN_RMII_REF_CLK, NULL);
+	gpio_request(GPIO_FN_RMII_TX_EN,   NULL);
+	gpio_request(GPIO_FN_RMII_RX_ER,   NULL);
+	gpio_request(GPIO_FN_RMII_CRS_DV,  NULL);
+	gpio_request(GPIO_FN_MDIO,         NULL);
+	gpio_request(GPIO_FN_MDC,          NULL);
+	gpio_request(GPIO_PTX5, NULL);
+	gpio_direction_input(GPIO_PTX5);
+	sh_eth_init();
+
 	if (sw & SW41_B) {
 		/* SVGA */
 		lcdc_info.ch[0].lcd_cfg.xres         = 800;
@@ -437,7 +577,7 @@ static int __init devices_setup(void)
 	}
 
 	return platform_add_devices(ms7724se_devices,
-				ARRAY_SIZE(ms7724se_devices));
+				    ARRAY_SIZE(ms7724se_devices));
 }
 device_initcall(devices_setup);
 
diff --git a/arch/sh/configs/migor_defconfig b/arch/sh/configs/migor_defconfig
index da627d22c009..b18cfd39cac6 100644
--- a/arch/sh/configs/migor_defconfig
+++ b/arch/sh/configs/migor_defconfig
@@ -309,7 +309,7 @@ CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=serial ip=on root=/dev/nfs ip=dhcp"
+CONFIG_CMDLINE="console=tty0 console=ttySC0,115200 earlyprintk=serial ip=on root=/dev/nfs ip=dhcp"
 
 #
 # Bus options
@@ -858,7 +858,35 @@ CONFIG_VIDEO_SH_MOBILE_CEU=y
 #
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+CONFIG_FB_SYS_FILLRECT=y
+CONFIG_FB_SYS_COPYAREA=y
+CONFIG_FB_SYS_IMAGEBLIT=y
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+CONFIG_FB_SYS_FOPS=y
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_SH_MOBILE_LCDC=y
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -870,6 +898,27 @@ CONFIG_VIDEO_SH_MOBILE_CEU=y
 # Console display driver support
 #
 CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+# CONFIG_FONT_8x8 is not set
+# CONFIG_FONT_8x16 is not set
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+CONFIG_FONT_MINI_4x6=y
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+# CONFIG_LOGO_LINUX_CLUT224 is not set
+# CONFIG_LOGO_SUPERH_MONO is not set
+CONFIG_LOGO_SUPERH_VGA16=y
+# CONFIG_LOGO_SUPERH_CLUT224 is not set
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
diff --git a/arch/sh/configs/se7724_defconfig b/arch/sh/configs/se7724_defconfig
index 3840270283e4..3ee783a0a075 100644
--- a/arch/sh/configs/se7724_defconfig
+++ b/arch/sh/configs/se7724_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
 # Linux kernel version: 2.6.30
-# Thu Jun 18 16:09:05 2009
+# Mon Jun 29 16:28:43 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -14,6 +14,7 @@ CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -28,7 +29,9 @@ CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -88,10 +91,12 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
 
 #
 # Performance Counters
 #
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
@@ -107,6 +112,10 @@ CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -119,7 +128,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -584,7 +593,6 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_LIBFC is not set
 # CONFIG_LIBFCOE is not set
 # CONFIG_SCSI_DEBUG is not set
@@ -624,7 +632,7 @@ CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_AX88796 is not set
 # CONFIG_STNIC is not set
-# CONFIG_SH_ETH is not set
+CONFIG_SH_ETH=y
 CONFIG_SMC91X=y
 # CONFIG_ENC28J60 is not set
 # CONFIG_ETHOC is not set
@@ -801,6 +809,11 @@ CONFIG_SPI_BITBANG=y
 #
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
 # CONFIG_GPIO_SYSFS is not set
@@ -851,6 +864,8 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
 # CONFIG_REGULATOR is not set
 CONFIG_MEDIA_SUPPORT=y
 
@@ -1196,6 +1211,7 @@ CONFIG_RTC_DRV_PCF8563=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1260,6 +1276,7 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
 CONFIG_FILE_LOCKING=y
diff --git a/arch/sh/include/asm/perf_counter.h b/arch/sh/include/asm/perf_counter.h
index a8153c2aa6fa..d8e6bb9c0ccc 100644
--- a/arch/sh/include/asm/perf_counter.h
+++ b/arch/sh/include/asm/perf_counter.h
@@ -2,6 +2,8 @@
 #define __ASM_SH_PERF_COUNTER_H
 
 /* SH only supports software counters through this interface. */
-#define set_perf_counter_pending()	do { } while (0)
+static inline void set_perf_counter_pending(void) {}
+
+#define PERF_COUNTER_INDEX_OFFSET	0
 
 #endif /* __ASM_SH_PERF_COUNTER_H */
diff --git a/arch/sh/include/asm/syscall_32.h b/arch/sh/include/asm/syscall_32.h
index 5bc34681d994..6f83f2cc45c1 100644
--- a/arch/sh/include/asm/syscall_32.h
+++ b/arch/sh/include/asm/syscall_32.h
@@ -3,6 +3,7 @@
 
 #include <linux/kernel.h>
 #include <linux/sched.h>
+#include <linux/err.h>
 #include <asm/ptrace.h>
 
 /* The system call number is given by the user in R3 */
diff --git a/arch/sh/include/asm/thread_info.h b/arch/sh/include/asm/thread_info.h
index f09ac4806294..d570ac2e5cb9 100644
--- a/arch/sh/include/asm/thread_info.h
+++ b/arch/sh/include/asm/thread_info.h
@@ -51,7 +51,7 @@ struct thread_info {
 	.exec_domain	= &default_exec_domain,	\
 	.flags		= 0,			\
 	.cpu		= 0,			\
-	.preempt_count	= 1,			\
+	.preempt_count	= INIT_PREEMPT_COUNT,	\
 	.addr_limit	= KERNEL_DS,		\
 	.restart_block	= {			\
 		.fn = do_no_restart_syscall,	\
diff --git a/arch/sh/include/mach-se/mach/se7724.h b/arch/sh/include/mach-se/mach/se7724.h
index 74164b60d0db..29514a39d0f5 100644
--- a/arch/sh/include/mach-se/mach/se7724.h
+++ b/arch/sh/include/mach-se/mach/se7724.h
@@ -20,6 +20,11 @@
  */
 #include <asm/addrspace.h>
 
+/* SH Eth */
+#define SH_ETH_ADDR	(0xA4600000)
+#define SH_ETH_MAHR	(SH_ETH_ADDR + 0x1C0)
+#define SH_ETH_MALR	(SH_ETH_ADDR + 0x1C8)
+
 #define PA_LED		(0xba203000)	/* 8bit LED */
 #define IRQ_MODE	(0xba200010)
 #define IRQ0_SR		(0xba200014)
diff --git a/arch/sh/mm/fault_32.c b/arch/sh/mm/fault_32.c
index cc8ddbdf3d7a..71925946f1e1 100644
--- a/arch/sh/mm/fault_32.c
+++ b/arch/sh/mm/fault_32.c
@@ -15,12 +15,28 @@
 #include <linux/mm.h>
 #include <linux/hardirq.h>
 #include <linux/kprobes.h>
-#include <linux/marker.h>
+#include <linux/perf_counter.h>
 #include <asm/io_trapped.h>
 #include <asm/system.h>
 #include <asm/mmu_context.h>
 #include <asm/tlbflush.h>
 
+static inline int notify_page_fault(struct pt_regs *regs, int trap)
+{
+	int ret = 0;
+
+#ifdef CONFIG_KPROBES
+	if (!user_mode(regs)) {
+		preempt_disable();
+		if (kprobe_running() && kprobe_fault_handler(regs, trap))
+			ret = 1;
+		preempt_enable();
+	}
+#endif
+
+	return ret;
+}
+
 /*
  * This routine handles page faults.  It determines the address,
  * and the problem, and then passes it off to one of the appropriate
@@ -87,13 +103,16 @@ asmlinkage void __kprobes do_page_fault(struct pt_regs *regs,
 		return;
 	}
 
+	mm = tsk->mm;
+
+	if (unlikely(notify_page_fault(regs, lookup_exception_vector())))
+		return;
+
 	/* Only enable interrupts if they were on before the fault */
-	if ((regs->sr & SR_IMASK) != SR_IMASK) {
-		trace_hardirqs_on();
+	if ((regs->sr & SR_IMASK) != SR_IMASK)
 		local_irq_enable();
-	}
 
-	mm = tsk->mm;
+	perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS, 1, 0, regs, address);
 
 	/*
 	 * If we're in an interrupt or have no user
@@ -141,10 +160,15 @@ survive:
 			goto do_sigbus;
 		BUG();
 	}
-	if (fault & VM_FAULT_MAJOR)
+	if (fault & VM_FAULT_MAJOR) {
 		tsk->maj_flt++;
-	else
+		perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1, 0,
+				     regs, address);
+	} else {
 		tsk->min_flt++;
+		perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1, 0,
+				     regs, address);
+	}
 
 	up_read(&mm->mmap_sem);
 	return;
@@ -245,22 +269,6 @@ do_sigbus:
 		goto no_context;
 }
 
-static inline int notify_page_fault(struct pt_regs *regs, int trap)
-{
-	int ret = 0;
-
-#ifdef CONFIG_KPROBES
-	if (!user_mode(regs)) {
-		preempt_disable();
-		if (kprobe_running() && kprobe_fault_handler(regs, trap))
-			ret = 1;
-		preempt_enable();
-	}
-#endif
-
-	return ret;
-}
-
 /*
  * Called with interrupts disabled.
  */
@@ -273,12 +281,7 @@ asmlinkage int __kprobes __do_page_fault(struct pt_regs *regs,
 	pmd_t *pmd;
 	pte_t *pte;
 	pte_t entry;
-	int ret = 0;
-
-	if (notify_page_fault(regs, lookup_exception_vector()))
-		goto out;
-
-	ret = 1;
+	int ret = 1;
 
 	/*
 	 * We don't take page faults for P1, P2, and parts of P4, these
diff --git a/arch/sh/mm/tlbflush_64.c b/arch/sh/mm/tlbflush_64.c
index fcbb6e135cef..3ce40ea34824 100644
--- a/arch/sh/mm/tlbflush_64.c
+++ b/arch/sh/mm/tlbflush_64.c
@@ -3,7 +3,7 @@
  *
  * Copyright (C) 2000, 2001  Paolo Alberelli
  * Copyright (C) 2003  Richard Curnow (/proc/tlb, bug fixes)
- * Copyright (C) 2003  Paul Mundt
+ * Copyright (C) 2003 - 2009 Paul Mundt
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
@@ -20,6 +20,7 @@
 #include <linux/mman.h>
 #include <linux/mm.h>
 #include <linux/smp.h>
+#include <linux/perf_counter.h>
 #include <linux/interrupt.h>
 #include <asm/system.h>
 #include <asm/io.h>
@@ -115,6 +116,8 @@ asmlinkage void do_page_fault(struct pt_regs *regs, unsigned long writeaccess,
 	/* Not an IO address, so reenable interrupts */
 	local_irq_enable();
 
+	perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS, 1, 0, regs, address);
+
 	/*
 	 * If we're in an interrupt or have no user
 	 * context, we must not take the fault..
@@ -195,10 +198,16 @@ survive:
 			goto do_sigbus;
 		BUG();
 	}
-	if (fault & VM_FAULT_MAJOR)
+
+	if (fault & VM_FAULT_MAJOR) {
 		tsk->maj_flt++;
-	else
+		perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1, 0,
+				     regs, address);
+	} else {
 		tsk->min_flt++;
+		perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1, 0,
+				     regs, address);
+	}
 
 	/* If we get here, the page fault has been handled.  Do the TLB refill
 	   now from the newly-setup PTE, to avoid having to fault again right
diff --git a/arch/sparc/boot/Makefile b/arch/sparc/boot/Makefile
index 96041a8d39e8..1ff0fd924756 100644
--- a/arch/sparc/boot/Makefile
+++ b/arch/sparc/boot/Makefile
@@ -15,7 +15,7 @@ quiet_cmd_elftoaout	= ELFTOAOUT $@
 
 ifeq ($(CONFIG_SPARC32),y)
 quiet_cmd_piggy		= PIGGY   $@
-      cmd_piggy		= $(obj)/piggyback_32 $@ $(obj)/System.map $(ROOT_IMG)
+      cmd_piggy		= $(obj)/piggyback_32 $@ System.map $(ROOT_IMG)
 quiet_cmd_btfix		= BTFIX   $@
       cmd_btfix		= $(OBJDUMP) -x vmlinux | $(obj)/btfixupprep > $@
 quiet_cmd_sysmap        = SYSMAP  $(obj)/System.map
@@ -58,7 +58,7 @@ $(obj)/image: $(obj)/btfix.o FORCE
 $(obj)/zImage: $(obj)/image
 	$(call if_changed,strip)
 
-$(obj)/tftpboot.img: $(obj)/piggyback $(obj)/System.map $(obj)/image FORCE
+$(obj)/tftpboot.img: $(obj)/image $(obj)/piggyback_32 System.map $(ROOT_IMG) FORCE
 	$(call if_changed,elftoaout)
 	$(call if_changed,piggy)
 
@@ -79,7 +79,7 @@ $(obj)/image: vmlinux FORCE
 	$(call if_changed,strip)
 	@echo '  kernel: $@ is ready'
 
-$(obj)/tftpboot.img: vmlinux $(obj)/piggyback_64 System.map $(ROOT_IMG) FORCE
+$(obj)/tftpboot.img: $(obj)/image $(obj)/piggyback_64 System.map $(ROOT_IMG) FORCE
 	$(call if_changed,elftoaout)
 	$(call if_changed,piggy)
 	@echo '  kernel: $@ is ready'
diff --git a/arch/sparc/boot/piggyback_32.c b/arch/sparc/boot/piggyback_32.c
index c9f500c1a8b2..e8dc9adfcd61 100644
--- a/arch/sparc/boot/piggyback_32.c
+++ b/arch/sparc/boot/piggyback_32.c
@@ -70,7 +70,7 @@ void die(char *str)
 int main(int argc,char **argv)
 {
 	static char aout_magic[] = { 0x01, 0x03, 0x01, 0x07 };
-	unsigned char buffer[1024], *q, *r;
+	char buffer[1024], *q, *r;
 	unsigned int i, j, k, start, end, offset;
 	FILE *map;
 	struct stat s;
@@ -84,7 +84,7 @@ int main(int argc,char **argv)
 	while (fgets (buffer, 1024, map)) {
 		if (!strcmp (buffer + 8, " T start\n") || !strcmp (buffer + 16, " T start\n"))
 			start = strtoul (buffer, NULL, 16);
-		else if (!strcmp (buffer + 8, " A end\n") || !strcmp (buffer + 16, " A end\n"))
+		else if (!strcmp (buffer + 8, " A _end\n") || !strcmp (buffer + 16, " A _end\n"))
 			end = strtoul (buffer, NULL, 16);
 	}
 	fclose (map);
diff --git a/arch/sparc/boot/piggyback_64.c b/arch/sparc/boot/piggyback_64.c
index de364bfed0bb..c63fd1b6bdd4 100644
--- a/arch/sparc/boot/piggyback_64.c
+++ b/arch/sparc/boot/piggyback_64.c
@@ -46,6 +46,7 @@ int main(int argc,char **argv)
 	struct stat s;
 	int image, tail;
 	
+	start = end = 0;
 	if (stat (argv[3], &s) < 0) die (argv[3]);
 	map = fopen (argv[2], "r");
 	if (!map) die(argv[2]);
diff --git a/arch/sparc/include/asm/thread_info_32.h b/arch/sparc/include/asm/thread_info_32.h
index 0f7b0e5fb1c7..844d73a0340c 100644
--- a/arch/sparc/include/asm/thread_info_32.h
+++ b/arch/sparc/include/asm/thread_info_32.h
@@ -54,8 +54,6 @@ struct thread_info {
 
 /*
  * macros/functions for gaining access to the thread information structure
- *
- * preempt_count needs to be 1 initially, until the scheduler is functional.
  */
 #define INIT_THREAD_INFO(tsk)				\
 {							\
@@ -64,7 +62,7 @@ struct thread_info {
 	.exec_domain	=	&default_exec_domain,	\
 	.flags		=	0,			\
 	.cpu		=	0,			\
-	.preempt_count	=	1,			\
+	.preempt_count	=	INIT_PREEMPT_COUNT,	\
 	.restart_block	= {				\
 		.fn	=	do_no_restart_syscall,	\
 	},						\
diff --git a/arch/sparc/include/asm/thread_info_64.h b/arch/sparc/include/asm/thread_info_64.h
index 65865726b283..1b45a7bbe407 100644
--- a/arch/sparc/include/asm/thread_info_64.h
+++ b/arch/sparc/include/asm/thread_info_64.h
@@ -125,8 +125,6 @@ struct thread_info {
 
 /*
  * macros/functions for gaining access to the thread information structure
- *
- * preempt_count needs to be 1 initially, until the scheduler is functional.
  */
 #ifndef __ASSEMBLY__
 
@@ -135,7 +133,7 @@ struct thread_info {
 	.task		=	&tsk,			\
 	.flags		= ((unsigned long)ASI_P) << TI_FLAG_CURRENT_DS_SHIFT,	\
 	.exec_domain	=	&default_exec_domain,	\
-	.preempt_count	=	1,			\
+	.preempt_count	=	INIT_PREEMPT_COUNT,	\
 	.restart_block	= {				\
 		.fn	=	do_no_restart_syscall,	\
 	},						\
diff --git a/arch/sparc/kernel/irq_64.c b/arch/sparc/kernel/irq_64.c
index bd075054942b..f0ee79055409 100644
--- a/arch/sparc/kernel/irq_64.c
+++ b/arch/sparc/kernel/irq_64.c
@@ -20,7 +20,6 @@
 #include <linux/delay.h>
 #include <linux/proc_fs.h>
 #include <linux/seq_file.h>
-#include <linux/bootmem.h>
 #include <linux/irq.h>
 
 #include <asm/ptrace.h>
@@ -914,25 +913,19 @@ void __cpuinit notrace sun4v_register_mondo_queues(int this_cpu)
 			   tb->nonresum_qmask);
 }
 
-static void __init alloc_one_mondo(unsigned long *pa_ptr, unsigned long qmask)
-{
-	unsigned long size = PAGE_ALIGN(qmask + 1);
-	void *p = __alloc_bootmem(size, size, 0);
-	if (!p) {
-		prom_printf("SUN4V: Error, cannot allocate mondo queue.\n");
-		prom_halt();
-	}
-
-	*pa_ptr = __pa(p);
-}
-
-static void __init alloc_one_kbuf(unsigned long *pa_ptr, unsigned long qmask)
+/* Each queue region must be a power of 2 multiple of 64 bytes in
+ * size.  The base real address must be aligned to the size of the
+ * region.  Thus, an 8KB queue must be 8KB aligned, for example.
+ */
+static void __init alloc_one_queue(unsigned long *pa_ptr, unsigned long qmask)
 {
 	unsigned long size = PAGE_ALIGN(qmask + 1);
-	void *p = __alloc_bootmem(size, size, 0);
+	unsigned long order = get_order(size);
+	unsigned long p;
 
+	p = __get_free_pages(GFP_KERNEL, order);
 	if (!p) {
-		prom_printf("SUN4V: Error, cannot allocate kbuf page.\n");
+		prom_printf("SUN4V: Error, cannot allocate queue.\n");
 		prom_halt();
 	}
 
@@ -942,11 +935,11 @@ static void __init alloc_one_kbuf(unsigned long *pa_ptr, unsigned long qmask)
 static void __init init_cpu_send_mondo_info(struct trap_per_cpu *tb)
 {
 #ifdef CONFIG_SMP
-	void *page;
+	unsigned long page;
 
 	BUILD_BUG_ON((NR_CPUS * sizeof(u16)) > (PAGE_SIZE - 64));
 
-	page = alloc_bootmem_pages(PAGE_SIZE);
+	page = get_zeroed_page(GFP_KERNEL);
 	if (!page) {
 		prom_printf("SUN4V: Error, cannot allocate cpu mondo page.\n");
 		prom_halt();
@@ -965,13 +958,13 @@ static void __init sun4v_init_mondo_queues(void)
 	for_each_possible_cpu(cpu) {
 		struct trap_per_cpu *tb = &trap_block[cpu];
 
-		alloc_one_mondo(&tb->cpu_mondo_pa, tb->cpu_mondo_qmask);
-		alloc_one_mondo(&tb->dev_mondo_pa, tb->dev_mondo_qmask);
-		alloc_one_mondo(&tb->resum_mondo_pa, tb->resum_qmask);
-		alloc_one_kbuf(&tb->resum_kernel_buf_pa, tb->resum_qmask);
-		alloc_one_mondo(&tb->nonresum_mondo_pa, tb->nonresum_qmask);
-		alloc_one_kbuf(&tb->nonresum_kernel_buf_pa,
-			       tb->nonresum_qmask);
+		alloc_one_queue(&tb->cpu_mondo_pa, tb->cpu_mondo_qmask);
+		alloc_one_queue(&tb->dev_mondo_pa, tb->dev_mondo_qmask);
+		alloc_one_queue(&tb->resum_mondo_pa, tb->resum_qmask);
+		alloc_one_queue(&tb->resum_kernel_buf_pa, tb->resum_qmask);
+		alloc_one_queue(&tb->nonresum_mondo_pa, tb->nonresum_qmask);
+		alloc_one_queue(&tb->nonresum_kernel_buf_pa,
+				tb->nonresum_qmask);
 	}
 }
 
@@ -999,7 +992,7 @@ void __init init_IRQ(void)
 	kill_prom_timer();
 
 	size = sizeof(struct ino_bucket) * NUM_IVECS;
-	ivector_table = alloc_bootmem(size);
+	ivector_table = kzalloc(size, GFP_KERNEL);
 	if (!ivector_table) {
 		prom_printf("Fatal error, cannot allocate ivector_table\n");
 		prom_halt();
diff --git a/arch/um/drivers/slip_kern.c b/arch/um/drivers/slip_kern.c
index 5ec17563142e..dd2aadc14af0 100644
--- a/arch/um/drivers/slip_kern.c
+++ b/arch/um/drivers/slip_kern.c
@@ -30,7 +30,6 @@ static void slip_init(struct net_device *dev, void *data)
 
 	slip_proto_init(&spri->slip);
 
-	dev->init = NULL;
 	dev->hard_header_len = 0;
 	dev->header_ops = NULL;
 	dev->addr_len = 0;
diff --git a/arch/um/drivers/slirp_kern.c b/arch/um/drivers/slirp_kern.c
index f15a6e7654f3..e376284f0fb7 100644
--- a/arch/um/drivers/slirp_kern.c
+++ b/arch/um/drivers/slirp_kern.c
@@ -32,7 +32,6 @@ void slirp_init(struct net_device *dev, void *data)
 
 	slip_proto_init(&spri->slip);
 
-	dev->init = NULL;
 	dev->hard_header_len = 0;
 	dev->header_ops = NULL;
 	dev->addr_len = 0;
diff --git a/arch/um/include/asm/dma-mapping.h b/arch/um/include/asm/dma-mapping.h
index 90fc708b320e..378de4bbf49f 100644
--- a/arch/um/include/asm/dma-mapping.h
+++ b/arch/um/include/asm/dma-mapping.h
@@ -79,14 +79,14 @@ dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries,
 }
 
 static inline void
-dma_sync_single(struct device *dev, dma_addr_t dma_handle, size_t size,
+dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, size_t size,
 		enum dma_data_direction direction)
 {
 	BUG();
 }
 
 static inline void
-dma_sync_sg(struct device *dev, struct scatterlist *sg, int nelems,
+dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nelems,
 	    enum dma_data_direction direction)
 {
 	BUG();
diff --git a/arch/um/include/asm/thread_info.h b/arch/um/include/asm/thread_info.h
index 62274ab9471f..fd911f855367 100644
--- a/arch/um/include/asm/thread_info.h
+++ b/arch/um/include/asm/thread_info.h
@@ -32,7 +32,7 @@ struct thread_info {
 	.exec_domain =	&default_exec_domain,	\
 	.flags =		0,		\
 	.cpu =		0,			\
-	.preempt_count =	1,		\
+	.preempt_count = INIT_PREEMPT_COUNT,	\
 	.addr_limit =	KERNEL_DS,		\
 	.restart_block =  {			\
 		.fn =  do_no_restart_syscall,	\
diff --git a/arch/um/kernel/sysrq.c b/arch/um/kernel/sysrq.c
index 56d43d0a3960..0960de54495a 100644
--- a/arch/um/kernel/sysrq.c
+++ b/arch/um/kernel/sysrq.c
@@ -70,8 +70,8 @@ void show_stack(struct task_struct *task, unsigned long *esp)
 		if (kstack_end(stack))
 			break;
 		if (i && ((i % 8) == 0))
-			printk("\n" KERN_INFO "       ");
-		printk("%08lx ", *stack++);
+			printk(KERN_INFO "       ");
+		printk(KERN_CONT "%08lx ", *stack++);
 	}
 
 	show_trace(task, esp);
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index d1430ef6b4f9..738bdc6b0f8b 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -1913,25 +1913,26 @@ config DMAR_DEFAULT_ON
 	  recommended you say N here while the DMAR code remains
 	  experimental.
 
-config DMAR_GFX_WA
-	def_bool y
-	prompt "Support for Graphics workaround"
+config DMAR_BROKEN_GFX_WA
+	def_bool n
+	prompt "Workaround broken graphics drivers (going away soon)"
 	depends on DMAR
 	---help---
 	  Current Graphics drivers tend to use physical address
 	  for DMA and avoid using DMA APIs. Setting this config
 	  option permits the IOMMU driver to set a unity map for
 	  all the OS-visible memory. Hence the driver can continue
-	  to use physical addresses for DMA.
+	  to use physical addresses for DMA, at least until this
+	  option is removed in the 2.6.32 kernel.
 
 config DMAR_FLOPPY_WA
 	def_bool y
 	depends on DMAR
 	---help---
-	  Floppy disk drivers are know to bypass DMA API calls
+	  Floppy disk drivers are known to bypass DMA API calls
 	  thereby failing to work when IOMMU is enabled. This
 	  workaround will setup a 1:1 mapping for the first
-	  16M to make floppy (an ISA device) work.
+	  16MiB to make floppy (an ISA device) work.
 
 config INTR_REMAP
 	bool "Support for Interrupt Remapping (EXPERIMENTAL)"
diff --git a/arch/x86/boot/video-bios.c b/arch/x86/boot/video-bios.c
index d660be492363..49e0c18833e0 100644
--- a/arch/x86/boot/video-bios.c
+++ b/arch/x86/boot/video-bios.c
@@ -37,14 +37,13 @@ static int set_bios_mode(u8 mode)
 	ireg.al = mode;		/* AH=0x00 Set Video Mode */
 	intcall(0x10, &ireg, NULL);
 
-
 	ireg.ah = 0x0f;		/* Get Current Video Mode */
 	intcall(0x10, &ireg, &oreg);
 
 	do_restore = 1;		/* Assume video contents were lost */
 
 	/* Not all BIOSes are clean with the top bit */
-	new_mode = ireg.al & 0x7f;
+	new_mode = oreg.al & 0x7f;
 
 	if (new_mode == mode)
 		return 0;	/* Mode change OK */
diff --git a/arch/x86/boot/video-vesa.c b/arch/x86/boot/video-vesa.c
index c700147d6ffb..275dd177f198 100644
--- a/arch/x86/boot/video-vesa.c
+++ b/arch/x86/boot/video-vesa.c
@@ -45,7 +45,7 @@ static int vesa_probe(void)
 	ireg.di = (size_t)&vginfo;
 	intcall(0x10, &ireg, &oreg);
 
-	if (ireg.ax != 0x004f ||
+	if (oreg.ax != 0x004f ||
 	    vginfo.signature != VESA_MAGIC ||
 	    vginfo.version < 0x0102)
 		return 0;	/* Not present */
@@ -70,7 +70,7 @@ static int vesa_probe(void)
 		ireg.di = (size_t)&vminfo;
 		intcall(0x10, &ireg, &oreg);
 
-		if (ireg.ax != 0x004f)
+		if (oreg.ax != 0x004f)
 			continue;
 
 		if ((vminfo.mode_attr & 0x15) == 0x05) {
diff --git a/arch/x86/include/asm/atomic_32.h b/arch/x86/include/asm/atomic_32.h
index 2503d4e64c2a..dc5a667ff791 100644
--- a/arch/x86/include/asm/atomic_32.h
+++ b/arch/x86/include/asm/atomic_32.h
@@ -19,7 +19,10 @@
  *
  * Atomically reads the value of @v.
  */
-#define atomic_read(v)		((v)->counter)
+static inline int atomic_read(const atomic_t *v)
+{
+	return v->counter;
+}
 
 /**
  * atomic_set - set atomic variable
@@ -28,7 +31,10 @@
  *
  * Atomically sets the value of @v to @i.
  */
-#define atomic_set(v, i)	(((v)->counter) = (i))
+static inline void atomic_set(atomic_t *v, int i)
+{
+	v->counter = i;
+}
 
 /**
  * atomic_add - add integer to atomic variable
@@ -200,8 +206,15 @@ static inline int atomic_sub_return(int i, atomic_t *v)
 	return atomic_add_return(-i, v);
 }
 
-#define atomic_cmpxchg(v, old, new) (cmpxchg(&((v)->counter), (old), (new)))
-#define atomic_xchg(v, new) (xchg(&((v)->counter), (new)))
+static inline int atomic_cmpxchg(atomic_t *v, int old, int new)
+{
+	return cmpxchg(&v->counter, old, new);
+}
+
+static inline int atomic_xchg(atomic_t *v, int new)
+{
+	return xchg(&v->counter, new);
+}
 
 /**
  * atomic_add_unless - add unless the number is already a given value
@@ -250,45 +263,12 @@ static inline int atomic_add_unless(atomic_t *v, int a, int u)
 /* An 64bit atomic type */
 
 typedef struct {
-	unsigned long long counter;
+	u64 __aligned(8) counter;
 } atomic64_t;
 
 #define ATOMIC64_INIT(val)	{ (val) }
 
-/**
- * atomic64_read - read atomic64 variable
- * @ptr: pointer of type atomic64_t
- *
- * Atomically reads the value of @v.
- * Doesn't imply a read memory barrier.
- */
-#define __atomic64_read(ptr)		((ptr)->counter)
-
-static inline unsigned long long
-cmpxchg8b(unsigned long long *ptr, unsigned long long old, unsigned long long new)
-{
-	asm volatile(
-
-		LOCK_PREFIX "cmpxchg8b (%[ptr])\n"
-
-		     :		"=A" (old)
-
-		     : [ptr]	"D" (ptr),
-				"A" (old),
-				"b" (ll_low(new)),
-				"c" (ll_high(new))
-
-		     : "memory");
-
-	return old;
-}
-
-static inline unsigned long long
-atomic64_cmpxchg(atomic64_t *ptr, unsigned long long old_val,
-		 unsigned long long new_val)
-{
-	return cmpxchg8b(&ptr->counter, old_val, new_val);
-}
+extern u64 atomic64_cmpxchg(atomic64_t *ptr, u64 old_val, u64 new_val);
 
 /**
  * atomic64_xchg - xchg atomic64 variable
@@ -298,18 +278,7 @@ atomic64_cmpxchg(atomic64_t *ptr, unsigned long long old_val,
  * Atomically xchgs the value of @ptr to @new_val and returns
  * the old value.
  */
-
-static inline unsigned long long
-atomic64_xchg(atomic64_t *ptr, unsigned long long new_val)
-{
-	unsigned long long old_val;
-
-	do {
-		old_val = atomic_read(ptr);
-	} while (atomic64_cmpxchg(ptr, old_val, new_val) != old_val);
-
-	return old_val;
-}
+extern u64 atomic64_xchg(atomic64_t *ptr, u64 new_val);
 
 /**
  * atomic64_set - set atomic64 variable
@@ -318,10 +287,7 @@ atomic64_xchg(atomic64_t *ptr, unsigned long long new_val)
  *
  * Atomically sets the value of @ptr to @new_val.
  */
-static inline void atomic64_set(atomic64_t *ptr, unsigned long long new_val)
-{
-	atomic64_xchg(ptr, new_val);
-}
+extern void atomic64_set(atomic64_t *ptr, u64 new_val);
 
 /**
  * atomic64_read - read atomic64 variable
@@ -329,17 +295,30 @@ static inline void atomic64_set(atomic64_t *ptr, unsigned long long new_val)
  *
  * Atomically reads the value of @ptr and returns it.
  */
-static inline unsigned long long atomic64_read(atomic64_t *ptr)
+static inline u64 atomic64_read(atomic64_t *ptr)
 {
-	unsigned long long curr_val;
-
-	do {
-		curr_val = __atomic64_read(ptr);
-	} while (atomic64_cmpxchg(ptr, curr_val, curr_val) != curr_val);
-
-	return curr_val;
+	u64 res;
+
+	/*
+	 * Note, we inline this atomic64_t primitive because
+	 * it only clobbers EAX/EDX and leaves the others
+	 * untouched. We also (somewhat subtly) rely on the
+	 * fact that cmpxchg8b returns the current 64-bit value
+	 * of the memory location we are touching:
+	 */
+	asm volatile(
+		"mov %%ebx, %%eax\n\t"
+		"mov %%ecx, %%edx\n\t"
+		LOCK_PREFIX "cmpxchg8b %1\n"
+			: "=&A" (res)
+			: "m" (*ptr)
+		);
+
+	return res;
 }
 
+extern u64 atomic64_read(atomic64_t *ptr);
+
 /**
  * atomic64_add_return - add and return
  * @delta: integer value to add
@@ -347,34 +326,14 @@ static inline unsigned long long atomic64_read(atomic64_t *ptr)
  *
  * Atomically adds @delta to @ptr and returns @delta + *@ptr
  */
-static inline unsigned long long
-atomic64_add_return(unsigned long long delta, atomic64_t *ptr)
-{
-	unsigned long long old_val, new_val;
-
-	do {
-		old_val = atomic_read(ptr);
-		new_val = old_val + delta;
-
-	} while (atomic64_cmpxchg(ptr, old_val, new_val) != old_val);
-
-	return new_val;
-}
-
-static inline long atomic64_sub_return(unsigned long long delta, atomic64_t *ptr)
-{
-	return atomic64_add_return(-delta, ptr);
-}
+extern u64 atomic64_add_return(u64 delta, atomic64_t *ptr);
 
-static inline long atomic64_inc_return(atomic64_t *ptr)
-{
-	return atomic64_add_return(1, ptr);
-}
-
-static inline long atomic64_dec_return(atomic64_t *ptr)
-{
-	return atomic64_sub_return(1, ptr);
-}
+/*
+ * Other variants with different arithmetic operators:
+ */
+extern u64 atomic64_sub_return(u64 delta, atomic64_t *ptr);
+extern u64 atomic64_inc_return(atomic64_t *ptr);
+extern u64 atomic64_dec_return(atomic64_t *ptr);
 
 /**
  * atomic64_add - add integer to atomic64 variable
@@ -383,10 +342,7 @@ static inline long atomic64_dec_return(atomic64_t *ptr)
  *
  * Atomically adds @delta to @ptr.
  */
-static inline void atomic64_add(unsigned long long delta, atomic64_t *ptr)
-{
-	atomic64_add_return(delta, ptr);
-}
+extern void atomic64_add(u64 delta, atomic64_t *ptr);
 
 /**
  * atomic64_sub - subtract the atomic64 variable
@@ -395,10 +351,7 @@ static inline void atomic64_add(unsigned long long delta, atomic64_t *ptr)
  *
  * Atomically subtracts @delta from @ptr.
  */
-static inline void atomic64_sub(unsigned long long delta, atomic64_t *ptr)
-{
-	atomic64_add(-delta, ptr);
-}
+extern void atomic64_sub(u64 delta, atomic64_t *ptr);
 
 /**
  * atomic64_sub_and_test - subtract value from variable and test result
@@ -409,13 +362,7 @@ static inline void atomic64_sub(unsigned long long delta, atomic64_t *ptr)
  * true if the result is zero, or false for all
  * other cases.
  */
-static inline int
-atomic64_sub_and_test(unsigned long long delta, atomic64_t *ptr)
-{
-	unsigned long long old_val = atomic64_sub_return(delta, ptr);
-
-	return old_val == 0;
-}
+extern int atomic64_sub_and_test(u64 delta, atomic64_t *ptr);
 
 /**
  * atomic64_inc - increment atomic64 variable
@@ -423,10 +370,7 @@ atomic64_sub_and_test(unsigned long long delta, atomic64_t *ptr)
  *
  * Atomically increments @ptr by 1.
  */
-static inline void atomic64_inc(atomic64_t *ptr)
-{
-	atomic64_add(1, ptr);
-}
+extern void atomic64_inc(atomic64_t *ptr);
 
 /**
  * atomic64_dec - decrement atomic64 variable
@@ -434,10 +378,7 @@ static inline void atomic64_inc(atomic64_t *ptr)
  *
  * Atomically decrements @ptr by 1.
  */
-static inline void atomic64_dec(atomic64_t *ptr)
-{
-	atomic64_sub(1, ptr);
-}
+extern void atomic64_dec(atomic64_t *ptr);
 
 /**
  * atomic64_dec_and_test - decrement and test
@@ -447,10 +388,7 @@ static inline void atomic64_dec(atomic64_t *ptr)
  * returns true if the result is 0, or false for all other
  * cases.
  */
-static inline int atomic64_dec_and_test(atomic64_t *ptr)
-{
-	return atomic64_sub_and_test(1, ptr);
-}
+extern int atomic64_dec_and_test(atomic64_t *ptr);
 
 /**
  * atomic64_inc_and_test - increment and test
@@ -460,10 +398,7 @@ static inline int atomic64_dec_and_test(atomic64_t *ptr)
  * and returns true if the result is zero, or false for all
  * other cases.
  */
-static inline int atomic64_inc_and_test(atomic64_t *ptr)
-{
-	return atomic64_sub_and_test(-1, ptr);
-}
+extern int atomic64_inc_and_test(atomic64_t *ptr);
 
 /**
  * atomic64_add_negative - add and test if negative
@@ -474,13 +409,7 @@ static inline int atomic64_inc_and_test(atomic64_t *ptr)
  * if the result is negative, or false when
  * result is greater than or equal to zero.
  */
-static inline int
-atomic64_add_negative(unsigned long long delta, atomic64_t *ptr)
-{
-	long long old_val = atomic64_add_return(delta, ptr);
-
-	return old_val < 0;
-}
+extern int atomic64_add_negative(u64 delta, atomic64_t *ptr);
 
 #include <asm-generic/atomic-long.h>
 #endif /* _ASM_X86_ATOMIC_32_H */
diff --git a/arch/x86/include/asm/atomic_64.h b/arch/x86/include/asm/atomic_64.h
index 0d6360220007..d605dc268e79 100644
--- a/arch/x86/include/asm/atomic_64.h
+++ b/arch/x86/include/asm/atomic_64.h
@@ -18,7 +18,10 @@
  *
  * Atomically reads the value of @v.
  */
-#define atomic_read(v)		((v)->counter)
+static inline int atomic_read(const atomic_t *v)
+{
+	return v->counter;
+}
 
 /**
  * atomic_set - set atomic variable
@@ -27,7 +30,10 @@
  *
  * Atomically sets the value of @v to @i.
  */
-#define atomic_set(v, i)		(((v)->counter) = (i))
+static inline void atomic_set(atomic_t *v, int i)
+{
+	v->counter = i;
+}
 
 /**
  * atomic_add - add integer to atomic variable
@@ -192,7 +198,10 @@ static inline int atomic_sub_return(int i, atomic_t *v)
  * Atomically reads the value of @v.
  * Doesn't imply a read memory barrier.
  */
-#define atomic64_read(v)		((v)->counter)
+static inline long atomic64_read(const atomic64_t *v)
+{
+	return v->counter;
+}
 
 /**
  * atomic64_set - set atomic64 variable
@@ -201,7 +210,10 @@ static inline int atomic_sub_return(int i, atomic_t *v)
  *
  * Atomically sets the value of @v to @i.
  */
-#define atomic64_set(v, i)		(((v)->counter) = (i))
+static inline void atomic64_set(atomic64_t *v, long i)
+{
+	v->counter = i;
+}
 
 /**
  * atomic64_add - add integer to atomic64 variable
@@ -355,11 +367,25 @@ static inline long atomic64_sub_return(long i, atomic64_t *v)
 #define atomic64_inc_return(v)  (atomic64_add_return(1, (v)))
 #define atomic64_dec_return(v)  (atomic64_sub_return(1, (v)))
 
-#define atomic64_cmpxchg(v, old, new) (cmpxchg(&((v)->counter), (old), (new)))
-#define atomic64_xchg(v, new) (xchg(&((v)->counter), new))
+static inline long atomic64_cmpxchg(atomic64_t *v, long old, long new)
+{
+	return cmpxchg(&v->counter, old, new);
+}
+
+static inline long atomic64_xchg(atomic64_t *v, long new)
+{
+	return xchg(&v->counter, new);
+}
 
-#define atomic_cmpxchg(v, old, new) (cmpxchg(&((v)->counter), (old), (new)))
-#define atomic_xchg(v, new) (xchg(&((v)->counter), (new)))
+static inline long atomic_cmpxchg(atomic_t *v, int old, int new)
+{
+	return cmpxchg(&v->counter, old, new);
+}
+
+static inline long atomic_xchg(atomic_t *v, int new)
+{
+	return xchg(&v->counter, new);
+}
 
 /**
  * atomic_add_unless - add unless the number is a given value
diff --git a/arch/x86/include/asm/boot.h b/arch/x86/include/asm/boot.h
index 418e632d4a80..7a1065958ba9 100644
--- a/arch/x86/include/asm/boot.h
+++ b/arch/x86/include/asm/boot.h
@@ -8,7 +8,7 @@
 
 #ifdef __KERNEL__
 
-#include <asm/page_types.h>
+#include <asm/pgtable_types.h>
 
 /* Physical address where kernel should be loaded. */
 #define LOAD_PHYSICAL_ADDR ((CONFIG_PHYSICAL_START \
@@ -16,10 +16,10 @@
 				& ~(CONFIG_PHYSICAL_ALIGN - 1))
 
 /* Minimum kernel alignment, as a power of two */
-#ifdef CONFIG_x86_64
+#ifdef CONFIG_X86_64
 #define MIN_KERNEL_ALIGN_LG2	PMD_SHIFT
 #else
-#define MIN_KERNEL_ALIGN_LG2	(PAGE_SHIFT+1)
+#define MIN_KERNEL_ALIGN_LG2	(PAGE_SHIFT + THREAD_ORDER)
 #endif
 #define MIN_KERNEL_ALIGN	(_AC(1, UL) << MIN_KERNEL_ALIGN_LG2)
 
diff --git a/arch/x86/include/asm/fixmap.h b/arch/x86/include/asm/fixmap.h
index 2d81af3974a0..7b2d71df39a6 100644
--- a/arch/x86/include/asm/fixmap.h
+++ b/arch/x86/include/asm/fixmap.h
@@ -111,12 +111,9 @@ enum fixed_addresses {
 #ifdef CONFIG_PARAVIRT
 	FIX_PARAVIRT_BOOTMAP,
 #endif
-	FIX_TEXT_POKE0,	/* reserve 2 pages for text_poke() */
-	FIX_TEXT_POKE1,
+	FIX_TEXT_POKE1,	/* reserve 2 pages for text_poke() */
+	FIX_TEXT_POKE0, /* first page is last, because allocation is backward */
 	__end_of_permanent_fixed_addresses,
-#ifdef CONFIG_PROVIDE_OHCI1394_DMA_INIT
-	FIX_OHCI1394_BASE,
-#endif
 	/*
 	 * 256 temporary boot-time mappings, used by early_ioremap(),
 	 * before ioremap() is functional.
@@ -129,6 +126,9 @@ enum fixed_addresses {
 	FIX_BTMAP_END = __end_of_permanent_fixed_addresses + 256 -
 			(__end_of_permanent_fixed_addresses & 255),
 	FIX_BTMAP_BEGIN = FIX_BTMAP_END + NR_FIX_BTMAPS*FIX_BTMAPS_SLOTS - 1,
+#ifdef CONFIG_PROVIDE_OHCI1394_DMA_INIT
+	FIX_OHCI1394_BASE,
+#endif
 #ifdef CONFIG_X86_32
 	FIX_WP_TEST,
 #endif
diff --git a/arch/x86/include/asm/msr-index.h b/arch/x86/include/asm/msr-index.h
index 1692fb5050e3..6be7fc254b59 100644
--- a/arch/x86/include/asm/msr-index.h
+++ b/arch/x86/include/asm/msr-index.h
@@ -246,10 +246,6 @@
 #define MSR_IA32_MISC_ENABLE_TURBO_DISABLE	(1ULL << 38)
 #define MSR_IA32_MISC_ENABLE_IP_PREF_DISABLE	(1ULL << 39)
 
-/* Intel Model 6 */
-#define MSR_P6_EVNTSEL0			0x00000186
-#define MSR_P6_EVNTSEL1			0x00000187
-
 /* P4/Xeon+ specific */
 #define MSR_IA32_MCG_EAX		0x00000180
 #define MSR_IA32_MCG_EBX		0x00000181
diff --git a/arch/x86/include/asm/nmi.h b/arch/x86/include/asm/nmi.h
index c97264409934..c86e5ed4af51 100644
--- a/arch/x86/include/asm/nmi.h
+++ b/arch/x86/include/asm/nmi.h
@@ -72,7 +72,6 @@ void lapic_watchdog_stop(void);
 int lapic_watchdog_init(unsigned nmi_hz);
 int lapic_wd_event(unsigned nmi_hz);
 unsigned lapic_adjust_nmi_hz(unsigned hz);
-int lapic_watchdog_ok(void);
 void disable_lapic_nmi_watchdog(void);
 void enable_lapic_nmi_watchdog(void);
 void stop_nmi(void);
diff --git a/arch/x86/include/asm/pci.h b/arch/x86/include/asm/pci.h
index 927958d13c19..1ff685ca221c 100644
--- a/arch/x86/include/asm/pci.h
+++ b/arch/x86/include/asm/pci.h
@@ -91,7 +91,7 @@ extern void pci_iommu_alloc(void);
 
 #define PCI_DMA_BUS_IS_PHYS (dma_ops->is_phys)
 
-#if defined(CONFIG_X86_64) || defined(CONFIG_DMA_API_DEBUG)
+#if defined(CONFIG_X86_64) || defined(CONFIG_DMAR) || defined(CONFIG_DMA_API_DEBUG)
 
 #define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)       \
 	        dma_addr_t ADDR_NAME;
diff --git a/arch/x86/include/asm/percpu.h b/arch/x86/include/asm/percpu.h
index 02ecb30982a3..103f1ddb0d85 100644
--- a/arch/x86/include/asm/percpu.h
+++ b/arch/x86/include/asm/percpu.h
@@ -42,6 +42,7 @@
 
 #else /* ...!ASSEMBLY */
 
+#include <linux/kernel.h>
 #include <linux/stringify.h>
 
 #ifdef CONFIG_SMP
@@ -155,6 +156,15 @@ do {							\
 /* We can use this directly for local CPU (faster). */
 DECLARE_PER_CPU(unsigned long, this_cpu_off);
 
+#ifdef CONFIG_NEED_MULTIPLE_NODES
+void *pcpu_lpage_remapped(void *kaddr);
+#else
+static inline void *pcpu_lpage_remapped(void *kaddr)
+{
+	return NULL;
+}
+#endif
+
 #endif /* !__ASSEMBLY__ */
 
 #ifdef CONFIG_SMP
diff --git a/arch/x86/include/asm/perf_counter.h b/arch/x86/include/asm/perf_counter.h
index 5fb33e160ea0..fa64e401589d 100644
--- a/arch/x86/include/asm/perf_counter.h
+++ b/arch/x86/include/asm/perf_counter.h
@@ -87,6 +87,9 @@ union cpuid10_edx {
 #ifdef CONFIG_PERF_COUNTERS
 extern void init_hw_perf_counters(void);
 extern void perf_counters_lapic_init(void);
+
+#define PERF_COUNTER_INDEX_OFFSET			0
+
 #else
 static inline void init_hw_perf_counters(void)		{ }
 static inline void perf_counters_lapic_init(void)	{ }
diff --git a/arch/x86/include/asm/proto.h b/arch/x86/include/asm/proto.h
index 49fb3ecf3bb3..621f56d73121 100644
--- a/arch/x86/include/asm/proto.h
+++ b/arch/x86/include/asm/proto.h
@@ -22,7 +22,14 @@ extern int reboot_force;
 
 long do_arch_prctl(struct task_struct *task, int code, unsigned long addr);
 
-#define round_up(x, y) (((x) + (y) - 1) & ~((y) - 1))
-#define round_down(x, y) ((x) & ~((y) - 1))
+/*
+ * This looks more complex than it should be. But we need to
+ * get the type for the ~ right in round_down (it needs to be
+ * as wide as the result!), and we want to evaluate the macro
+ * arguments just once each.
+ */
+#define __round_mask(x,y) ((__typeof__(x))((y)-1))
+#define round_up(x,y) ((((x)-1) | __round_mask(x,y))+1)
+#define round_down(x,y) ((x) & ~__round_mask(x,y))
 
 #endif /* _ASM_X86_PROTO_H */
diff --git a/arch/x86/include/asm/spinlock.h b/arch/x86/include/asm/spinlock.h
index b7e5db876399..4e77853321db 100644
--- a/arch/x86/include/asm/spinlock.h
+++ b/arch/x86/include/asm/spinlock.h
@@ -302,4 +302,8 @@ static inline void __raw_write_unlock(raw_rwlock_t *rw)
 #define _raw_read_relax(lock)	cpu_relax()
 #define _raw_write_relax(lock)	cpu_relax()
 
+/* The {read|write|spin}_lock() on x86 are full memory barriers. */
+static inline void smp_mb__after_lock(void) { }
+#define ARCH_HAS_SMP_MB_AFTER_LOCK
+
 #endif /* _ASM_X86_SPINLOCK_H */
diff --git a/arch/x86/include/asm/stacktrace.h b/arch/x86/include/asm/stacktrace.h
index f517944b2b17..cf86a5e73815 100644
--- a/arch/x86/include/asm/stacktrace.h
+++ b/arch/x86/include/asm/stacktrace.h
@@ -3,6 +3,8 @@
 
 extern int kstack_depth_to_print;
 
+int x86_is_stack_id(int id, char *name);
+
 /* Generic stack tracer with callbacks */
 
 struct stacktrace_ops {
diff --git a/arch/x86/include/asm/thread_info.h b/arch/x86/include/asm/thread_info.h
index b0783520988b..fad7d40b75f8 100644
--- a/arch/x86/include/asm/thread_info.h
+++ b/arch/x86/include/asm/thread_info.h
@@ -49,7 +49,7 @@ struct thread_info {
 	.exec_domain	= &default_exec_domain,	\
 	.flags		= 0,			\
 	.cpu		= 0,			\
-	.preempt_count	= 1,			\
+	.preempt_count	= INIT_PREEMPT_COUNT,	\
 	.addr_limit	= KERNEL_DS,		\
 	.restart_block = {			\
 		.fn = do_no_restart_syscall,	\
diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index 6c327b852e23..430d5b24af7b 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -26,6 +26,8 @@ CFLAGS_tsc.o		:= $(nostackp)
 CFLAGS_paravirt.o	:= $(nostackp)
 GCOV_PROFILE_vsyscall_64.o	:= n
 GCOV_PROFILE_hpet.o		:= n
+GCOV_PROFILE_tsc.o		:= n
+GCOV_PROFILE_paravirt.o		:= n
 
 obj-y			:= process_$(BITS).o signal.o entry_$(BITS).o
 obj-y			+= traps.o irq.o irq_$(BITS).o dumpstack_$(BITS).o
diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c
index 9372f0406ad4..6c99f5037801 100644
--- a/arch/x86/kernel/amd_iommu.c
+++ b/arch/x86/kernel/amd_iommu.c
@@ -1192,7 +1192,7 @@ out:
 	return 0;
 }
 
-struct notifier_block device_nb = {
+static struct notifier_block device_nb = {
 	.notifier_call = device_change_notifier,
 };
 
@@ -1763,7 +1763,7 @@ static void *alloc_coherent(struct device *dev, size_t size,
 	flag |= __GFP_ZERO;
 	virt_addr = (void *)__get_free_pages(flag, get_order(size));
 	if (!virt_addr)
-		return 0;
+		return NULL;
 
 	paddr = virt_to_phys(virt_addr);
 
diff --git a/arch/x86/kernel/amd_iommu_init.c b/arch/x86/kernel/amd_iommu_init.c
index 10b2accd12ea..c1b17e97252e 100644
--- a/arch/x86/kernel/amd_iommu_init.c
+++ b/arch/x86/kernel/amd_iommu_init.c
@@ -472,6 +472,8 @@ static u8 * __init alloc_event_buffer(struct amd_iommu *iommu)
 	if (iommu->evt_buf == NULL)
 		return NULL;
 
+	iommu->evt_buf_size = EVT_BUFFER_SIZE;
+
 	return iommu->evt_buf;
 }
 
@@ -691,6 +693,7 @@ static void __init init_iommu_from_acpi(struct amd_iommu *iommu,
 
 			devid = e->devid;
 			devid_to = e->ext >> 8;
+			set_dev_entry_from_acpi(iommu, devid   , e->flags, 0);
 			set_dev_entry_from_acpi(iommu, devid_to, e->flags, 0);
 			amd_iommu_alias_table[devid] = devid_to;
 			break;
@@ -749,11 +752,13 @@ static void __init init_iommu_from_acpi(struct amd_iommu *iommu,
 
 			devid = e->devid;
 			for (dev_i = devid_start; dev_i <= devid; ++dev_i) {
-				if (alias)
+				if (alias) {
 					amd_iommu_alias_table[dev_i] = devid_to;
-				set_dev_entry_from_acpi(iommu,
-						amd_iommu_alias_table[dev_i],
-						flags, ext_flags);
+					set_dev_entry_from_acpi(iommu,
+						devid_to, flags, ext_flags);
+				}
+				set_dev_entry_from_acpi(iommu, dev_i,
+							flags, ext_flags);
 			}
 			break;
 		default:
diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index 8c7c042ecad1..0a1c2830ec66 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -140,7 +140,6 @@ int x2apic_mode;
 #ifdef CONFIG_X86_X2APIC
 /* x2apic enabled before OS handover */
 static int x2apic_preenabled;
-static int disable_x2apic;
 static __init int setup_nox2apic(char *str)
 {
 	if (x2apic_enabled()) {
@@ -149,7 +148,6 @@ static __init int setup_nox2apic(char *str)
 		return 0;
 	}
 
-	disable_x2apic = 1;
 	setup_clear_cpu_cap(X86_FEATURE_X2APIC);
 	return 0;
 }
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index 4d0216fcb36c..90b5e6efa938 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -1716,25 +1716,19 @@ __apicdebuginit(void) print_IO_APIC(void)
 	return;
 }
 
-__apicdebuginit(void) print_APIC_bitfield(int base)
+__apicdebuginit(void) print_APIC_field(int base)
 {
-	unsigned int v;
-	int i, j;
+	int i;
 
 	if (apic_verbosity == APIC_QUIET)
 		return;
 
-	printk(KERN_DEBUG "0123456789abcdef0123456789abcdef\n" KERN_DEBUG);
-	for (i = 0; i < 8; i++) {
-		v = apic_read(base + i*0x10);
-		for (j = 0; j < 32; j++) {
-			if (v & (1<<j))
-				printk("1");
-			else
-				printk("0");
-		}
-		printk("\n");
-	}
+	printk(KERN_DEBUG);
+
+	for (i = 0; i < 8; i++)
+		printk(KERN_CONT "%08x", apic_read(base + i*0x10));
+
+	printk(KERN_CONT "\n");
 }
 
 __apicdebuginit(void) print_local_APIC(void *dummy)
@@ -1745,7 +1739,7 @@ __apicdebuginit(void) print_local_APIC(void *dummy)
 	if (apic_verbosity == APIC_QUIET)
 		return;
 
-	printk("\n" KERN_DEBUG "printing local APIC contents on CPU#%d/%d:\n",
+	printk(KERN_DEBUG "printing local APIC contents on CPU#%d/%d:\n",
 		smp_processor_id(), hard_smp_processor_id());
 	v = apic_read(APIC_ID);
 	printk(KERN_INFO "... APIC ID:      %08x (%01x)\n", v, read_apic_id());
@@ -1786,11 +1780,11 @@ __apicdebuginit(void) print_local_APIC(void *dummy)
 	printk(KERN_DEBUG "... APIC SPIV: %08x\n", v);
 
 	printk(KERN_DEBUG "... APIC ISR field:\n");
-	print_APIC_bitfield(APIC_ISR);
+	print_APIC_field(APIC_ISR);
 	printk(KERN_DEBUG "... APIC TMR field:\n");
-	print_APIC_bitfield(APIC_TMR);
+	print_APIC_field(APIC_TMR);
 	printk(KERN_DEBUG "... APIC IRR field:\n");
-	print_APIC_bitfield(APIC_IRR);
+	print_APIC_field(APIC_IRR);
 
 	if (APIC_INTEGRATED(ver)) {             /* !82489DX */
 		if (maxlvt > 3)         /* Due to the Pentium erratum 3AP. */
diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c
index e5b27d8f1b47..28e5f5956042 100644
--- a/arch/x86/kernel/cpu/amd.c
+++ b/arch/x86/kernel/cpu/amd.c
@@ -258,13 +258,15 @@ static void __cpuinit amd_detect_cmp(struct cpuinfo_x86 *c)
 {
 #ifdef CONFIG_X86_HT
 	unsigned bits;
+	int cpu = smp_processor_id();
 
 	bits = c->x86_coreid_bits;
-
 	/* Low order bits define the core id (index of core in socket) */
 	c->cpu_core_id = c->initial_apicid & ((1 << bits)-1);
 	/* Convert the initial APIC ID into the socket ID */
 	c->phys_proc_id = c->initial_apicid >> bits;
+	/* use socket ID also for last level cache */
+	per_cpu(cpu_llc_id, cpu) = c->phys_proc_id;
 #endif
 }
 
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index 6b26d4deada0..f1961c07af9a 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -848,9 +848,6 @@ static void __cpuinit identify_cpu(struct cpuinfo_x86 *c)
 #if defined(CONFIG_NUMA) && defined(CONFIG_X86_64)
 	numa_add_cpu(smp_processor_id());
 #endif
-
-	/* Cap the iomem address space to what is addressable on all CPUs */
-	iomem_resource.end &= (1ULL << c->x86_phys_bits) - 1;
 }
 
 #ifdef CONFIG_X86_64
diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
index 81cbe64ed6b4..2a50ef891000 100644
--- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
+++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
@@ -299,7 +299,7 @@ static int transition_pstate(struct powernow_k8_data *data, u32 pstate)
 static int transition_fid_vid(struct powernow_k8_data *data,
 		u32 reqfid, u32 reqvid)
 {
-	if (core_voltage_pre_transition(data, reqvid))
+	if (core_voltage_pre_transition(data, reqvid, reqfid))
 		return 1;
 
 	if (core_frequency_transition(data, reqfid))
@@ -327,17 +327,20 @@ static int transition_fid_vid(struct powernow_k8_data *data,
 
 /* Phase 1 - core voltage transition ... setup voltage */
 static int core_voltage_pre_transition(struct powernow_k8_data *data,
-		u32 reqvid)
+		u32 reqvid, u32 reqfid)
 {
 	u32 rvosteps = data->rvo;
 	u32 savefid = data->currfid;
-	u32 maxvid, lo;
+	u32 maxvid, lo, rvomult = 1;
 
 	dprintk("ph1 (cpu%d): start, currfid 0x%x, currvid 0x%x, "
 		"reqvid 0x%x, rvo 0x%x\n",
 		smp_processor_id(),
 		data->currfid, data->currvid, reqvid, data->rvo);
 
+	if ((savefid < LO_FID_TABLE_TOP) && (reqfid < LO_FID_TABLE_TOP))
+		rvomult = 2;
+	rvosteps *= rvomult;
 	rdmsr(MSR_FIDVID_STATUS, lo, maxvid);
 	maxvid = 0x1f & (maxvid >> 16);
 	dprintk("ph1 maxvid=0x%x\n", maxvid);
@@ -351,7 +354,8 @@ static int core_voltage_pre_transition(struct powernow_k8_data *data,
 			return 1;
 	}
 
-	while ((rvosteps > 0) && ((data->rvo + data->currvid) > reqvid)) {
+	while ((rvosteps > 0) &&
+			((rvomult * data->rvo + data->currvid) > reqvid)) {
 		if (data->currvid == maxvid) {
 			rvosteps = 0;
 		} else {
@@ -384,13 +388,6 @@ static int core_frequency_transition(struct powernow_k8_data *data, u32 reqfid)
 	u32 vcoreqfid, vcocurrfid, vcofiddiff;
 	u32 fid_interval, savevid = data->currvid;
 
-	if ((reqfid < HI_FID_TABLE_BOTTOM) &&
-	    (data->currfid < HI_FID_TABLE_BOTTOM)) {
-		printk(KERN_ERR PFX "ph2: illegal lo-lo transition "
-				"0x%x 0x%x\n", reqfid, data->currfid);
-		return 1;
-	}
-
 	if (data->currfid == reqfid) {
 		printk(KERN_ERR PFX "ph2 null fid transition 0x%x\n",
 				data->currfid);
@@ -407,6 +404,9 @@ static int core_frequency_transition(struct powernow_k8_data *data, u32 reqfid)
 	vcofiddiff = vcocurrfid > vcoreqfid ? vcocurrfid - vcoreqfid
 	    : vcoreqfid - vcocurrfid;
 
+	if ((reqfid <= LO_FID_TABLE_TOP) && (data->currfid <= LO_FID_TABLE_TOP))
+		vcofiddiff = 0;
+
 	while (vcofiddiff > 2) {
 		(data->currfid & 1) ? (fid_interval = 1) : (fid_interval = 2);
 
@@ -1081,14 +1081,6 @@ static int transition_frequency_fidvid(struct powernow_k8_data *data,
 		return 0;
 	}
 
-	if ((fid < HI_FID_TABLE_BOTTOM) &&
-	    (data->currfid < HI_FID_TABLE_BOTTOM)) {
-		printk(KERN_ERR PFX
-		       "ignoring illegal change in lo freq table-%x to 0x%x\n",
-		       data->currfid, fid);
-		return 1;
-	}
-
 	dprintk("cpu %d, changing to fid 0x%x, vid 0x%x\n",
 		smp_processor_id(), fid, vid);
 	freqs.old = find_khz_freq_from_fid(data->currfid);
@@ -1267,7 +1259,7 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol)
 {
 	static const char ACPI_PSS_BIOS_BUG_MSG[] =
 		KERN_ERR FW_BUG PFX "No compatible ACPI _PSS objects found.\n"
-		KERN_ERR FW_BUG PFX "Try again with latest BIOS.\n";
+		FW_BUG PFX "Try again with latest BIOS.\n";
 	struct powernow_k8_data *data;
 	struct init_on_cpu init_on_cpu;
 	int rc;
diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.h b/arch/x86/kernel/cpu/cpufreq/powernow-k8.h
index c9c1190b5e1f..02ce824073cb 100644
--- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.h
+++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.h
@@ -215,7 +215,8 @@ struct pst_s {
 
 #define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "powernow-k8", msg)
 
-static int core_voltage_pre_transition(struct powernow_k8_data *data, u32 reqvid);
+static int core_voltage_pre_transition(struct powernow_k8_data *data,
+	u32 reqvid, u32 regfid);
 static int core_voltage_post_transition(struct powernow_k8_data *data, u32 reqvid);
 static int core_frequency_transition(struct powernow_k8_data *data, u32 reqfid);
 
diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c
index 284d1de968bc..484c1e5f658e 100644
--- a/arch/x86/kernel/cpu/mcheck/mce.c
+++ b/arch/x86/kernel/cpu/mcheck/mce.c
@@ -194,14 +194,14 @@ static void print_mce(struct mce *m)
 		       m->cs, m->ip);
 		if (m->cs == __KERNEL_CS)
 			print_symbol("{%s}", m->ip);
-		printk("\n");
+		printk(KERN_CONT "\n");
 	}
 	printk(KERN_EMERG "TSC %llx ", m->tsc);
 	if (m->addr)
-		printk("ADDR %llx ", m->addr);
+		printk(KERN_CONT "ADDR %llx ", m->addr);
 	if (m->misc)
-		printk("MISC %llx ", m->misc);
-	printk("\n");
+		printk(KERN_CONT "MISC %llx ", m->misc);
+	printk(KERN_CONT "\n");
 	printk(KERN_EMERG "PROCESSOR %u:%x TIME %llu SOCKET %u APIC %x\n",
 			m->cpuvendor, m->cpuid, m->time, m->socketid,
 			m->apicid);
@@ -209,13 +209,13 @@ static void print_mce(struct mce *m)
 
 static void print_mce_head(void)
 {
-	printk(KERN_EMERG "\n" KERN_EMERG "HARDWARE ERROR\n");
+	printk(KERN_EMERG "\nHARDWARE ERROR\n");
 }
 
 static void print_mce_tail(void)
 {
 	printk(KERN_EMERG "This is not a software problem!\n"
-	       KERN_EMERG "Run through mcelog --ascii to decode and contact your hardware vendor\n");
+	       "Run through mcelog --ascii to decode and contact your hardware vendor\n");
 }
 
 #define PANIC_TIMEOUT 5 /* 5 seconds */
@@ -1117,7 +1117,7 @@ static void mcheck_timer(unsigned long data)
 		*n = min(*n*2, (int)round_jiffies_relative(check_interval*HZ));
 
 	t->expires = jiffies + *n;
-	add_timer(t);
+	add_timer_on(t, smp_processor_id());
 }
 
 static void mce_do_trigger(struct work_struct *work)
@@ -1321,7 +1321,7 @@ static void mce_init_timer(void)
 		return;
 	setup_timer(t, mcheck_timer, smp_processor_id());
 	t->expires = round_jiffies(jiffies + *n);
-	add_timer(t);
+	add_timer_on(t, smp_processor_id());
 }
 
 /*
diff --git a/arch/x86/kernel/cpu/perf_counter.c b/arch/x86/kernel/cpu/perf_counter.c
index 76dfef23f789..36c3dc7b8991 100644
--- a/arch/x86/kernel/cpu/perf_counter.c
+++ b/arch/x86/kernel/cpu/perf_counter.c
@@ -401,7 +401,7 @@ static const u64 amd_hw_cache_event_ids
 		[ C(RESULT_MISS)   ] = 0x0041, /* Data Cache Misses          */
 	},
 	[ C(OP_WRITE) ] = {
-		[ C(RESULT_ACCESS) ] = 0x0042, /* Data Cache Refills from L2 */
+		[ C(RESULT_ACCESS) ] = 0x0142, /* Data Cache Refills :system */
 		[ C(RESULT_MISS)   ] = 0,
 	},
 	[ C(OP_PREFETCH) ] = {
@@ -912,6 +912,8 @@ x86_perf_counter_set_period(struct perf_counter *counter,
 	err = checking_wrmsrl(hwc->counter_base + idx,
 			     (u64)(-left) & x86_pmu.counter_mask);
 
+	perf_counter_update_userpage(counter);
+
 	return ret;
 }
 
@@ -969,13 +971,6 @@ fixed_mode_idx(struct perf_counter *counter, struct hw_perf_counter *hwc)
 	if (!x86_pmu.num_counters_fixed)
 		return -1;
 
-	/*
-	 * Quirk, IA32_FIXED_CTRs do not work on current Atom processors:
-	 */
-	if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL &&
-					boot_cpu_data.x86_model == 28)
-		return -1;
-
 	event = hwc->config & ARCH_PERFMON_EVENT_MASK;
 
 	if (unlikely(event == x86_pmu.event_map(PERF_COUNT_HW_INSTRUCTIONS)))
@@ -1041,6 +1036,8 @@ try_generic:
 	x86_perf_counter_set_period(counter, hwc, idx);
 	x86_pmu.enable(hwc, idx);
 
+	perf_counter_update_userpage(counter);
+
 	return 0;
 }
 
@@ -1133,6 +1130,8 @@ static void x86_pmu_disable(struct perf_counter *counter)
 	x86_perf_counter_update(counter, hwc, idx);
 	cpuc->counters[idx] = NULL;
 	clear_bit(idx, cpuc->used_mask);
+
+	perf_counter_update_userpage(counter);
 }
 
 /*
@@ -1428,8 +1427,6 @@ static int intel_pmu_init(void)
 	 */
 	x86_pmu.num_counters_fixed	= max((int)edx.split.num_counters_fixed, 3);
 
-	rdmsrl(MSR_CORE_PERF_GLOBAL_CTRL, x86_pmu.intel_ctrl);
-
 	/*
 	 * Install the hw-cache-events table:
 	 */
@@ -1499,21 +1496,22 @@ void __init init_hw_perf_counters(void)
 	pr_cont("%s PMU driver.\n", x86_pmu.name);
 
 	if (x86_pmu.num_counters > X86_PMC_MAX_GENERIC) {
-		x86_pmu.num_counters = X86_PMC_MAX_GENERIC;
 		WARN(1, KERN_ERR "hw perf counters %d > max(%d), clipping!",
 		     x86_pmu.num_counters, X86_PMC_MAX_GENERIC);
+		x86_pmu.num_counters = X86_PMC_MAX_GENERIC;
 	}
 	perf_counter_mask = (1 << x86_pmu.num_counters) - 1;
 	perf_max_counters = x86_pmu.num_counters;
 
 	if (x86_pmu.num_counters_fixed > X86_PMC_MAX_FIXED) {
-		x86_pmu.num_counters_fixed = X86_PMC_MAX_FIXED;
 		WARN(1, KERN_ERR "hw perf counters fixed %d > max(%d), clipping!",
 		     x86_pmu.num_counters_fixed, X86_PMC_MAX_FIXED);
+		x86_pmu.num_counters_fixed = X86_PMC_MAX_FIXED;
 	}
 
 	perf_counter_mask |=
 		((1LL << x86_pmu.num_counters_fixed)-1) << X86_PMC_IDX_FIXED;
+	x86_pmu.intel_ctrl = perf_counter_mask;
 
 	perf_counters_lapic_init();
 	register_die_notifier(&perf_counter_nmi_notifier);
@@ -1563,6 +1561,7 @@ void callchain_store(struct perf_callchain_entry *entry, u64 ip)
 
 static DEFINE_PER_CPU(struct perf_callchain_entry, irq_entry);
 static DEFINE_PER_CPU(struct perf_callchain_entry, nmi_entry);
+static DEFINE_PER_CPU(int, in_nmi_frame);
 
 
 static void
@@ -1578,7 +1577,9 @@ static void backtrace_warning(void *data, char *msg)
 
 static int backtrace_stack(void *data, char *name)
 {
-	/* Process all stacks: */
+	per_cpu(in_nmi_frame, smp_processor_id()) =
+			x86_is_stack_id(NMI_STACK, name);
+
 	return 0;
 }
 
@@ -1586,6 +1587,9 @@ static void backtrace_address(void *data, unsigned long addr, int reliable)
 {
 	struct perf_callchain_entry *entry = data;
 
+	if (per_cpu(in_nmi_frame, smp_processor_id()))
+		return;
+
 	if (reliable)
 		callchain_store(entry, addr);
 }
diff --git a/arch/x86/kernel/cpu/perfctr-watchdog.c b/arch/x86/kernel/cpu/perfctr-watchdog.c
index 5c481f6205bf..e60ed740d2b3 100644
--- a/arch/x86/kernel/cpu/perfctr-watchdog.c
+++ b/arch/x86/kernel/cpu/perfctr-watchdog.c
@@ -803,8 +803,3 @@ int __kprobes lapic_wd_event(unsigned nmi_hz)
 	wd_ops->rearm(wd, nmi_hz);
 	return 1;
 }
-
-int lapic_watchdog_ok(void)
-{
-	return wd_ops != NULL;
-}
diff --git a/arch/x86/kernel/dumpstack.c b/arch/x86/kernel/dumpstack.c
index 95ea5fa7d444..c8405718a4c3 100644
--- a/arch/x86/kernel/dumpstack.c
+++ b/arch/x86/kernel/dumpstack.c
@@ -22,6 +22,7 @@
 #include "dumpstack.h"
 
 int panic_on_unrecovered_nmi;
+int panic_on_io_nmi;
 unsigned int code_bytes = 64;
 int kstack_depth_to_print = 3 * STACKSLOTS_PER_LINE;
 static int die_counter;
diff --git a/arch/x86/kernel/dumpstack_32.c b/arch/x86/kernel/dumpstack_32.c
index d593cd1f58dc..bca5fba91c9e 100644
--- a/arch/x86/kernel/dumpstack_32.c
+++ b/arch/x86/kernel/dumpstack_32.c
@@ -19,6 +19,12 @@
 
 #include "dumpstack.h"
 
+/* Just a stub for now */
+int x86_is_stack_id(int id, char *name)
+{
+	return 0;
+}
+
 void dump_trace(struct task_struct *task, struct pt_regs *regs,
 		unsigned long *stack, unsigned long bp,
 		const struct stacktrace_ops *ops, void *data)
diff --git a/arch/x86/kernel/dumpstack_64.c b/arch/x86/kernel/dumpstack_64.c
index d35db5993fd6..54b0a3276766 100644
--- a/arch/x86/kernel/dumpstack_64.c
+++ b/arch/x86/kernel/dumpstack_64.c
@@ -19,10 +19,8 @@
 
 #include "dumpstack.h"
 
-static unsigned long *in_exception_stack(unsigned cpu, unsigned long stack,
-					unsigned *usedp, char **idp)
-{
-	static char ids[][8] = {
+
+static char x86_stack_ids[][8] = {
 		[DEBUG_STACK - 1] = "#DB",
 		[NMI_STACK - 1] = "NMI",
 		[DOUBLEFAULT_STACK - 1] = "#DF",
@@ -33,6 +31,15 @@ static unsigned long *in_exception_stack(unsigned cpu, unsigned long stack,
 			N_EXCEPTION_STACKS + DEBUG_STKSZ / EXCEPTION_STKSZ - 2] = "#DB[?]"
 #endif
 	};
+
+int x86_is_stack_id(int id, char *name)
+{
+	return x86_stack_ids[id - 1] == name;
+}
+
+static unsigned long *in_exception_stack(unsigned cpu, unsigned long stack,
+					unsigned *usedp, char **idp)
+{
 	unsigned k;
 

path: root/net/tipc/discover.h

/*
 * net/tipc/discover.h
 *
 * Copyright (c) 2003-2006, Ericsson AB
 * Copyright (c) 2005, 2010-2011, Wind River Systems
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are met:
 *
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. Neither the names of the copyright holders nor the names of its
 *    contributors may be used to endorse or promote products derived from
 *    this software without specific prior written permission.
 *
 * Alternatively, this software may be distributed under the terms of the
 * GNU General Public License ("GPL") version 2 as published by the Free
 * Software Foundation.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 */

#ifndef _TIPC_DISCOVER_H
#define _TIPC_DISCOVER_H

struct tipc_link_req;

int tipc_disc_create(struct tipc_bearer *b_ptr, struct tipc_media_addr *dest,
		     u32 dest_domain);
void tipc_disc_delete(struct tipc_link_req *req);
void tipc_disc_add_dest(struct tipc_link_req *req);
void tipc_disc_remove_dest(struct tipc_link_req *req);
void tipc_disc_recv_msg(struct sk_buff *buf, struct tipc_bearer *b_ptr);

#endif