From 26bd9cc64fafe3e84a601220162465ed72cdfc89 Mon Sep 17 00:00:00 2001 From: Jeremy Linton Date: Mon, 24 Feb 2020 16:54:02 -0600 Subject: net: bcmgenet: Fetch MAC address from the adapter ARM/ACPI machines should utilize self describing hardware when possible. The MAC address on the BCMGENET can be read from the adapter if a full featured firmware has already programmed it. Lets try using the address already programmed, if it appears to be valid. It should be noted that while we move the macaddr logic below the clock and power logic in the driver, none of that code will ever be active in an ACPI environment as the device will be attached to the acpi power domain, and brought to full power with all clocks enabled immediately before the device probe routine is called. One side effect of the above tweak is that while its now possible to read the MAC address via _DSD properties, it should be avoided. Signed-off-by: Jeremy Linton Acked-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/genet/bcmgenet.c | 39 ++++++++++++++++++-------- 1 file changed, 27 insertions(+), 12 deletions(-) diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c index 1798551..4121567 100644 --- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c +++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c @@ -2772,6 +2772,21 @@ static void bcmgenet_set_hw_addr(struct bcmgenet_priv *priv, bcmgenet_umac_writel(priv, (addr[4] << 8) | addr[5], UMAC_MAC1); } +static void bcmgenet_get_hw_addr(struct bcmgenet_priv *priv, + unsigned char *addr) +{ + u32 addr_tmp; + + addr_tmp = bcmgenet_umac_readl(priv, UMAC_MAC0); + addr[0] = addr_tmp >> 24; + addr[1] = (addr_tmp >> 16) & 0xff; + addr[2] = (addr_tmp >> 8) & 0xff; + addr[3] = addr_tmp & 0xff; + addr_tmp = bcmgenet_umac_readl(priv, UMAC_MAC1); + addr[4] = (addr_tmp >> 8) & 0xff; + addr[5] = addr_tmp & 0xff; +} + /* Returns a reusable dma control register value */ static u32 bcmgenet_dma_disable(struct bcmgenet_priv *priv) { @@ -3467,7 +3482,6 @@ static int bcmgenet_probe(struct platform_device *pdev) const struct bcmgenet_plat_data *pdata; struct bcmgenet_priv *priv; struct net_device *dev; - const void *macaddr = NULL; unsigned int i; int err = -EIO; @@ -3498,11 +3512,6 @@ static int bcmgenet_probe(struct platform_device *pdev) } priv->wol_irq = platform_get_irq_optional(pdev, 2); - if (dn) - macaddr = of_get_mac_address(dn); - else if (pd) - macaddr = pd->mac_address; - priv->base = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(priv->base)) { err = PTR_ERR(priv->base); @@ -3513,12 +3522,6 @@ static int bcmgenet_probe(struct platform_device *pdev) SET_NETDEV_DEV(dev, &pdev->dev); dev_set_drvdata(&pdev->dev, dev); - if (IS_ERR_OR_NULL(macaddr) || !is_valid_ether_addr(macaddr)) { - dev_warn(&pdev->dev, "using random Ethernet MAC\n"); - eth_hw_addr_random(dev); - } else { - ether_addr_copy(dev->dev_addr, macaddr); - } dev->watchdog_timeo = 2 * HZ; dev->ethtool_ops = &bcmgenet_ethtool_ops; dev->netdev_ops = &bcmgenet_netdev_ops; @@ -3599,6 +3602,18 @@ static int bcmgenet_probe(struct platform_device *pdev) if (device_get_phy_mode(&pdev->dev) == PHY_INTERFACE_MODE_INTERNAL) bcmgenet_power_up(priv, GENET_POWER_PASSIVE); + if ((pd) && (!IS_ERR_OR_NULL(pd->mac_address))) + ether_addr_copy(dev->dev_addr, pd->mac_address); + else + if (!device_get_mac_address(&pdev->dev, dev->dev_addr, ETH_ALEN)) + if (has_acpi_companion(&pdev->dev)) + bcmgenet_get_hw_addr(priv, dev->dev_addr); + + if (!is_valid_ether_addr(dev->dev_addr)) { + dev_warn(&pdev->dev, "using random Ethernet MAC\n"); + eth_hw_addr_random(dev); + } + reset_umac(priv); err = bcmgenet_mii_init(dev); -- cgit