| Age | Commit message (Collapse) | Author |
|---|
|
Support ptp physical/virtual clocks conversion via sysfs.
There will be a new attribute n_vclocks under ptp physical
clock sysfs.
- In default, the value is 0 meaning only ptp physical clock
is in use.
- Setting the value can create corresponding number of ptp
virtual clocks to use. But current physical clock is guaranteed
to stay free running.
- Setting the value back to 0 can delete virtual clocks and back
use physical clock again.
Another new attribute max_vclocks control the maximum number of
ptp vclocks.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch is to add ptp virtual clock driver framework
utilizing timecounter/cyclecounter.
The patch just exports two essential APIs for PTP driver.
- ptp_vclock_register()
- ptp_vclock_unregister()
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
M Chetan Kumar says:
====================
net: wwan: iosm: fixes
This patch series contains IOSM Driver fixes and details are
are mentioned below.
Patch1: Corrects uevent reporting format key=value pair.
Patch2: Removes redundant IP session checks.
Patch3: Correct link-Id number to be in sycn with MBIM session Id.
Patch4: Update netdev tx stats.
Patch5: Set netdev default mtu size.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Set netdev default mtu size to 1500.
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Update tx stats on successful packet consume, drop.
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Link ID to be kept intact with MBIM session ID
Ex: ID 0 should be associated to MBIM session ID 0.
Reported-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Remove reduandant IP session id check since required checks
are in place under caller.
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Change uevent env variable name to IOSM_EVENT & correct
reporting format to key=value pair.
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Hariprasad Kelam says:
====================
DMAC based packet filtering
Each MAC block supports 32 DMAC filters which can be configured to accept
or drop packets based on address match This patch series adds mbox
handlers and extends ntuple filter callbacks to accomdate DMAC filters
such that user can install DMAC based filters on interface from ethtool.
Patch1 adds necessary mbox handlers such that mbox consumers like PF netdev
can add/delete/update DMAC filters and Patch2 adds debugfs support to dump
current list of installed filters. Patch3 adds support to call mbox
handlers upon receiving DMAC filters from ethtool ntuple commands.
Change-log:
v2 -
- fixed indentation issues.
v3 -
- fixed kdoc warnings
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
DMAC filtering can be achieved by either NPC MCAM rules or
CGX/RPM MAC filters. Currently we are achieving this by NPC
MCAM rules. This patch offloads DMAC filters to CGX/RPM MAC
filters instead of NPC MCAM rules. Offloading DMAC filter to
CGX/RPM block helps in reducing traffic to NPC block and
save MCAM rules
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add debugfs support to display CGX/RPM DMAC filter
table associated with pf.
cat /sys/kernel/debug/octeontx2/cgx/cgx0/lmac0/mac_filter
PCI dev RVUPF BROADCAST MULTICAST FILTER-MODE
0002:02:00.0 PF2 ACCEPT ACCEPT UNICAST
DMAC-INDEX ADDRESS
0 00:0f:b7:06:17:06
1 1a:1b:1c:1d:1e:01
2 1a:1b:1c:1d:1e:02
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
MAC block supports 32 dmac filters which are logically
divided among all attached LMACS.
For example MAC block0 having one LMAC then maximum supported
filters are 32 where as MAC block1 having 4 enabled LMACS
them maximum supported filteres are 8 for each LMAC.
This patch adds mbox handlers to add/delete/update mac entry
in DMAC filter table.
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
|
|
Ley Foon Tan has moved to a different role, so add Joyce Ooi as Altera PCIe
maintainer.
The rfi@lists.rocketboards.org mailing list seems to be dead, so drop it.
[bhelgaas: drop rfi@lists.rocketboards.org]
Link: https://lore.kernel.org/r/20210701065247.152292-1-joyce.ooi@intel.com
Signed-off-by: Joyce Ooi <joyce.ooi@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Pull drm updates from Dave Airlie:
"Highlights:
- AMD enables two more GPUs, with resulting header files
- i915 has started to move to TTM for discrete GPU and enable DG1
discrete GPU support (not by default yet)
- new HyperV drm driver
- vmwgfx adds arm64 support
- TTM refactoring ongoing
- 16bpc display support for AMD hw
Otherwise it's just the usual insane amounts of work all over the
place in lots of drivers and the core, as mostly summarised below:
Core:
- mark AGP ioctls as legacy
- disable force probing for non-master clients
- HDR metadata property helpers
- HDMI infoframe signal colorimetry support
- remove drm_device.pdev pointer
- remove DRM_KMS_FB_HELPER config option
- remove drm_pci_alloc/free
- drm_err_*/drm_dbg_* helpers
- use drm driver names for fbdev
- leaked DMA handle fix
- 16bpc fixed point format fourcc
- add prefetching memcpy for WC
- Documentation fixes
aperture:
- add aperture ownership helpers
dp:
- aux fixes
- downstream 0 port handling
- use extended base receiver capability DPCD
- Rename DP_PSR_SELECTIVE_UPDATE to better mach eDP spec
- mst: use khz as link rate during init
- VCPI fixes for StarTech hub
ttm:
- provide tt_shrink file via debugfs
- warn about freeing pinned BOs
- fix swapping error handling
- move page alignment into BO
- cleanup ttm_agp_backend
- add ttm_sys_manager
- don't override vm_ops
- ttm_bo_mmap removed
- make ttm_resource base of all managers
- remove VM_MIXEDMAP usage
panel:
- sysfs_emit support
- simple: runtime PM support
- simple: power up panel when reading EDID + caching
bridge:
- MHDP8546: HDCP support + DT bindings
- MHDP8546: Register DP AUX channel with userspace
- TI SN65DSI83 + SN65DSI84: add driver
- Sil8620: Fix module dependencies
- dw-hdmi: make CEC driver loading optional
- Ti-sn65dsi86: refclk fixes, subdrivers, runtime pm
- It66121: Add driver + DT bindings
- Adv7511: Support I2S IEC958 encoding
- Anx7625: fix power-on delay
- Nwi-dsi: Modesetting fixes; Cleanups
- lt6911: add missing MODULE_DEVICE_TABLE
- cdns: fix PM reference leak
hyperv:
- add new DRM driver for HyperV graphics
efifb:
- non-PCI device handling fixes
i915:
- refactor IP/device versioning
- XeLPD Display IP preperation work
- ADL-P enablement patches
- DG1 uAPI behind BROKEN
- disable mmap ioctl for discerte GPUs
- start enabling HuC loading for Gen12+
- major GuC backend rework for new platforms
- initial TTM support for Discrete GPUs
- locking rework for TTM prep
- use correct max source link rate for eDP
- %p4cc format printing
- GLK display fixes
- VLV DSI panel power fixes
- PSR2 disabled for RKL and ADL-S
- ACPI _DSM invalid access fixed
- DMC FW path abstraction
- ADL-S PCI ID update
- uAPI headers converted to kerneldoc
- initial LMEM support for DG1
- x86/gpu: add Jasperlake to gen11 early quirks
amdgpu:
- Aldebaran updates + initial SR-IOV
- new GPU: Beige Goby and Yellow Carp support
- more LTTPR display work
- Vangogh updates
- SDMA 5.x GCR fixes
- PCIe ASPM support
- Renoir TMZ enablement
- initial multiple eDP panel support
- use fdinfo to track devices/process info
- pin/unpin TTM fixes
- free resource on fence usage query
- fix fence calculation
- fix hotunplug/suspend issues
- GC/MM register access macro cleanup for SR-IOV
- W=1 fixes
- ACPI ATCS/ATIF handling rework
- 16bpc fixed point format support
- Initial smartshift support
- RV/PCO power tuning fixes
- new INFO query for additional vbios info
amdkfd:
- SR-IOV aldebaran support
- HMM SVM support
radeon:
- SMU regression fixes
- Oland flickering fix
vmwgfx:
- enable console with fbdev emulation
- fix cpu updates of coherent multisample surfaces
- remove reservation semaphore
- add initial SVGA3 support
- support arm64
msm:
- devcoredump support for display errors
- dpu/dsi: yaml bindings conversion
- mdp5: alpha/blend_mode/zpos support
- a6xx: cached coherent buffer support
- gpu iova fault improvement
- a660 support
rockchip:
- RK3036 win1 scaling support
- RK3066/3188 missing register support
- RK3036/3066/3126/3188 alpha support
mediatek:
- MT8167 HDMI support
- MT8183 DPI dual edge support
tegra:
- fixed YUV support/scaling on Tegra186+
ast:
- use pcim_iomap
- fix DP501 EDID
bochs:
- screen blanking support
etnaviv:
- export more GPU ID values to userspace
- add HWDB entry for GPU on i.MX8MP
- rework linear window calcs
exynos:
- pm runtime changes
imx:
- Annotate dma_fence critical section
- fix PRG modifiers after drmm conversion
- Add 8 pixel alignment fix for 1366x768
- fix YUV advertising
- add color properties
ingenic:
- IPU planes fix
panfrost:
- Mediatek MT8183 support + DT bindings
- export AFBC_FEATURES register to userspace
simpledrm:
- %pr for printing resources
nouveau:
- pin/unpin TTM fixes
qxl:
- unpin shadow BO
virtio:
- create dumb BOs as guest blob
vkms:
- drmm_universal_plane_alloc
- add XRGB plane composition
- overlay support"
* tag 'drm-next-2021-07-01' of git://anongit.freedesktop.org/drm/drm: (1570 commits)
drm/i915: Reinstate the mmap ioctl for some platforms
drm/i915/dsc: abstract helpers to get bigjoiner primary/secondary crtc
Revert "drm/msm/mdp5: provide dynamic bandwidth management"
drm/msm/mdp5: provide dynamic bandwidth management
drm/msm/mdp5: add perf blocks for holding fudge factors
drm/msm/mdp5: switch to standard zpos property
drm/msm/mdp5: add support for alpha/blend_mode properties
drm/msm/mdp5: use drm_plane_state for pixel blend mode
drm/msm/mdp5: use drm_plane_state for storing alpha value
drm/msm/mdp5: use drm atomic helpers to handle base drm plane state
drm/msm/dsi: do not enable PHYs when called for the slave DSI interface
drm/msm: Add debugfs to trigger shrinker
drm/msm/dpu: Avoid ABBA deadlock between IRQ modules
drm/msm: devcoredump iommu fault support
iommu/arm-smmu-qcom: Add stall support
drm/msm: Improve the a6xx page fault handler
iommu/arm-smmu-qcom: Add an adreno-smmu-priv callback to get pagefault info
iommu/arm-smmu: Add support for driver IOMMU fault handlers
drm/msm: export hangcheck_period in debugfs
drm/msm/a6xx: add support for Adreno 660 GPU
...
|
|
If one entered io_req_task_work_add() not seeing PF_EXITING, it will set
a ->task_state bit and try task_work_add(), which may fail by that
moment. If that happens the function would try to cancel the request.
However, in a meanwhile there might come other io_req_task_work_add()
callers, which will see the bit set and leave their requests in the
list, which will never be executed.
Don't propagate an error, but clear the bit first and then fallback
all requests that we can splice from the list. The callback functions
have to be able to deal with PF_EXITING, so poll and apoll was modified
via changing io_poll_rewait().
Fixes: 7cbf1722d5fc ("io_uring: provide FIFO ordering for task_work")
Reported-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/060002f19f1fdbd130ba24aef818ea4d3080819b.1625142209.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Since we don't really use req->task_work anymore, get rid of it together
with the nasty ->func aliasing between ->io_task_work and ->task_work,
and hide ->fallback_node inside of io_task_work.
Also, as task_work is gone now, replace the callback type from
task_work_func_t to a function taking io_kiocb to avoid casting and
simplify code.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When task_work_add() fails, we use ->exit_task_work to queue the work.
That will be run only in the cancellation path, which happens either
when the ctx is dying or one of tasks with inflight requests is exiting
or executing. There is a good chance that such a request would just get
stuck in the list potentially hodling a file, all io_uring rsrc
recycling or some other resources. Nothing terrible, it'll go away at
some point, but we don't want to lock them up for longer than needed.
Replace that hand made ->exit_task_work with delayed_work + llist
inspired by fput_many().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull io_uring updates from Jens Axboe:
- Multi-queue iopoll improvement (Fam)
- Allow configurable io-wq CPU masks (me)
- renameat/linkat tightening (me)
- poll re-arm improvement (Olivier)
- SQPOLL race fix (Olivier)
- Cancelation unification (Pavel)
- SQPOLL cleanups (Pavel)
- Enable file backed buffers for shmem/memfd (Pavel)
- A ton of cleanups and performance improvements (Pavel)
- Followup and misc fixes (Colin, Fam, Hao, Olivier)
* tag 'for-5.14/io_uring-2021-06-30' of git://git.kernel.dk/linux-block: (83 commits)
io_uring: code clean for kiocb_done()
io_uring: spin in iopoll() only when reqs are in a single queue
io_uring: pre-initialise some of req fields
io_uring: refactor io_submit_flush_completions
io_uring: optimise hot path restricted checks
io_uring: remove not needed PF_EXITING check
io_uring: mainstream sqpoll task_work running
io_uring: refactor io_arm_poll_handler()
io_uring: reduce latency by reissueing the operation
io_uring: add IOPOLL and reserved field checks to IORING_OP_UNLINKAT
io_uring: add IOPOLL and reserved field checks to IORING_OP_RENAMEAT
io_uring: refactor io_openat2()
io_uring: simplify struct io_uring_sqe layout
io_uring: update sqe layout build checks
io_uring: fix code style problems
io_uring: refactor io_sq_thread()
io_uring: don't change sqpoll creds if not needed
io_uring: Create define to modify a SQPOLL parameter
io_uring: Fix race condition when sqp thread goes to sleep
io_uring: improve in tctx_task_work() resubmission
...
|
|
ASan reports a memory leak caused by evlist not being deleted on exit in
perf-report, perf-script and perf-data.
The problem is caused by evlist->session not being deleted, which is
allocated in perf_session__read_header, called in perf_session__new if
perf_data is in read mode.
In case of write mode, the session->evlist is filled by the caller.
This patch solves the problem by calling evlist__delete in
perf_session__delete if perf_data is in read mode.
Changes in v2:
- call evlist__delete from within perf_session__delete
v1: https://lore.kernel.org/lkml/20210621234317.235545-1-rickyman7@gmail.com/
ASan report follows:
$ ./perf script report flamegraph
=================================================================
==227640==ERROR: LeakSanitizer: detected memory leaks
<SNIP unrelated>
Indirect leak of 2704 byte(s) in 1 object(s) allocated from:
#0 0x4f4137 in calloc (/home/user/linux/tools/perf/perf+0x4f4137)
#1 0xbe3d56 in zalloc /home/user/linux/tools/lib/perf/../../lib/zalloc.c:8:9
#2 0x7f999e in evlist__new /home/user/linux/tools/perf/util/evlist.c:77:26
#3 0x8ad938 in perf_session__read_header /home/user/linux/tools/perf/util/header.c:3797:20
#4 0x8ec714 in perf_session__open /home/user/linux/tools/perf/util/session.c:109:6
#5 0x8ebe83 in perf_session__new /home/user/linux/tools/perf/util/session.c:213:10
#6 0x60c6de in cmd_script /home/user/linux/tools/perf/builtin-script.c:3856:12
#7 0x7b2930 in run_builtin /home/user/linux/tools/perf/perf.c:313:11
#8 0x7b120f in handle_internal_command /home/user/linux/tools/perf/perf.c:365:8
#9 0x7b2493 in run_argv /home/user/linux/tools/perf/perf.c:409:2
#10 0x7b0c89 in main /home/user/linux/tools/perf/perf.c:539:3
#11 0x7f5260654b74 (/lib64/libc.so.6+0x27b74)
Indirect leak of 568 byte(s) in 1 object(s) allocated from:
#0 0x4f4137 in calloc (/home/user/linux/tools/perf/perf+0x4f4137)
#1 0xbe3d56 in zalloc /home/user/linux/tools/lib/perf/../../lib/zalloc.c:8:9
#2 0x80ce88 in evsel__new_idx /home/user/linux/tools/perf/util/evsel.c:268:24
#3 0x8aed93 in evsel__new /home/user/linux/tools/perf/util/evsel.h:210:9
#4 0x8ae07e in perf_session__read_header /home/user/linux/tools/perf/util/header.c:3853:11
#5 0x8ec714 in perf_session__open /home/user/linux/tools/perf/util/session.c:109:6
#6 0x8ebe83 in perf_session__new /home/user/linux/tools/perf/util/session.c:213:10
#7 0x60c6de in cmd_script /home/user/linux/tools/perf/builtin-script.c:3856:12
#8 0x7b2930 in run_builtin /home/user/linux/tools/perf/perf.c:313:11
#9 0x7b120f in handle_internal_command /home/user/linux/tools/perf/perf.c:365:8
#10 0x7b2493 in run_argv /home/user/linux/tools/perf/perf.c:409:2
#11 0x7b0c89 in main /home/user/linux/tools/perf/perf.c:539:3
#12 0x7f5260654b74 (/lib64/libc.so.6+0x27b74)
Indirect leak of 264 byte(s) in 1 object(s) allocated from:
#0 0x4f4137 in calloc (/home/user/linux/tools/perf/perf+0x4f4137)
#1 0xbe3d56 in zalloc /home/user/linux/tools/lib/perf/../../lib/zalloc.c:8:9
#2 0xbe3e70 in xyarray__new /home/user/linux/tools/lib/perf/xyarray.c:10:23
#3 0xbd7754 in perf_evsel__alloc_id /home/user/linux/tools/lib/perf/evsel.c:361:21
#4 0x8ae201 in perf_session__read_header /home/user/linux/tools/perf/util/header.c:3871:7
#5 0x8ec714 in perf_session__open /home/user/linux/tools/perf/util/session.c:109:6
#6 0x8ebe83 in perf_session__new /home/user/linux/tools/perf/util/session.c:213:10
#7 0x60c6de in cmd_script /home/user/linux/tools/perf/builtin-script.c:3856:12
#8 0x7b2930 in run_builtin /home/user/linux/tools/perf/perf.c:313:11
#9 0x7b120f in handle_internal_command /home/user/linux/tools/perf/perf.c:365:8
#10 0x7b2493 in run_argv /home/user/linux/tools/perf/perf.c:409:2
#11 0x7b0c89 in main /home/user/linux/tools/perf/perf.c:539:3
#12 0x7f5260654b74 (/lib64/libc.so.6+0x27b74)
Indirect leak of 32 byte(s) in 1 object(s) allocated from:
#0 0x4f4137 in calloc (/home/user/linux/tools/perf/perf+0x4f4137)
#1 0xbe3d56 in zalloc /home/user/linux/tools/lib/perf/../../lib/zalloc.c:8:9
#2 0xbd77e0 in perf_evsel__alloc_id /home/user/linux/tools/lib/perf/evsel.c:365:14
#3 0x8ae201 in perf_session__read_header /home/user/linux/tools/perf/util/header.c:3871:7
#4 0x8ec714 in perf_session__open /home/user/linux/tools/perf/util/session.c:109:6
#5 0x8ebe83 in perf_session__new /home/user/linux/tools/perf/util/session.c:213:10
#6 0x60c6de in cmd_script /home/user/linux/tools/perf/builtin-script.c:3856:12
#7 0x7b2930 in run_builtin /home/user/linux/tools/perf/perf.c:313:11
#8 0x7b120f in handle_internal_command /home/user/linux/tools/perf/perf.c:365:8
#9 0x7b2493 in run_argv /home/user/linux/tools/perf/perf.c:409:2
#10 0x7b0c89 in main /home/user/linux/tools/perf/perf.c:539:3
#11 0x7f5260654b74 (/lib64/libc.so.6+0x27b74)
Indirect leak of 7 byte(s) in 1 object(s) allocated from:
#0 0x4b8207 in strdup (/home/user/linux/tools/perf/perf+0x4b8207)
#1 0x8b4459 in evlist__set_event_name /home/user/linux/tools/perf/util/header.c:2292:16
#2 0x89d862 in process_event_desc /home/user/linux/tools/perf/util/header.c:2313:3
#3 0x8af319 in perf_file_section__process /home/user/linux/tools/perf/util/header.c:3651:9
#4 0x8aa6e9 in perf_header__process_sections /home/user/linux/tools/perf/util/header.c:3427:9
#5 0x8ae3e7 in perf_session__read_header /home/user/linux/tools/perf/util/header.c:3886:2
#6 0x8ec714 in perf_session__open /home/user/linux/tools/perf/util/session.c:109:6
#7 0x8ebe83 in perf_session__new /home/user/linux/tools/perf/util/session.c:213:10
#8 0x60c6de in cmd_script /home/user/linux/tools/perf/builtin-script.c:3856:12
#9 0x7b2930 in run_builtin /home/user/linux/tools/perf/perf.c:313:11
#10 0x7b120f in handle_internal_command /home/user/linux/tools/perf/perf.c:365:8
#11 0x7b2493 in run_argv /home/user/linux/tools/perf/perf.c:409:2
#12 0x7b0c89 in main /home/user/linux/tools/perf/perf.c:539:3
#13 0x7f5260654b74 (/lib64/libc.so.6+0x27b74)
SUMMARY: AddressSanitizer: 3728 byte(s) leaked in 7 allocation(s).
Signed-off-by: Riccardo Mancini <rickyman7@gmail.com>
Acked-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210624231926.212208-1-rickyman7@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
In perf annotate, when 's' is pressed on a line containing source code,
it shows the message "Only available for assembly lines".
This patch gets rid of the error, moving the cursr to the next available
asm line (or the closest previous one if no asm line is found moving
forwards), before hiding source code lines.
Changes in v2:
- handle case of no asm line found in
annotate_browser__find_next_asm_line by returning NULL and
handling error in caller.
Signed-off-by: Riccardo Mancini <rickyman7@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin Liška <mliska@suse.cz>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210624223423.189550-1-rickyman7@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add a function, for use by dlfilters, to read object code.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210627131818.810-11-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add a function, for use by dlfilters, to return the perf_event_attr
structure.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210627131818.810-10-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add a function, for use by dlfilters, to return source code file name and
line number.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210627131818.810-9-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add a function, for use by dlfilters, to return instruction bytes.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210627131818.810-8-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add a function, for use by dlfilters, to resolve addresses from branch
stacks or callchains.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210627131818.810-7-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Users of the --dlfilter option need to include perf_dlfilter.h
in their filters. Install it to the include path.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210627131818.810-6-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add option --dlarg to pass arguments to dlfilters. The --dlarg option can
be repeated to pass more than 1 argument.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210627131818.810-5-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add option --list-dlfilters to list dlfilters in the current directory or
the exec-path e.g. ~/libexec/perf-core/dlfilters. Use with option -v (must
come before option --list-dlfilters) to show long descriptions.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210627131818.810-4-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
filter_event_early() can be more than 30% faster than filter_event()
because it is called before internal filtering. In other respects it
is the same as filter_event(), except that it will be passed events
that have yet to be filtered out.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210627131818.810-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
In some cases, users want to filter very large amounts of data (e.g.
from AUX area tracing like Intel PT) looking for something specific.
While scripting such as Python can be used, Python is 10 to 20 times
slower than C. So define a C API so that custom filters can be written
and loaded.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210627131818.810-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Zhihao sent a patch but it made llvm__compile_bpf() return what
asprintf() returns on error, which is just -1, but since this function
returns -errno, fix it by returning -ENOMEM for this case instead.
Fixes: cb76371441d098 ("perf llvm: Allow passing options to llc ...")
Fixes: 5eab5a7ee032ac ("perf llvm: Display eBPF compiling command ...")
Reported-by: Hulk Robot <hulkci@huawei.com>
Reported-by: Zhihao Cheng <chengzhihao1@huawei.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yu Kuai <yukuai3@huawei.com>
Cc: clang-built-linux@googlegroups.com
Link: http://lore.kernel.org/lkml/20210609115945.2193194-1-chengzhihao1@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Currently, timeless mode starts the decode on PERF_RECORD_EXIT, and
non-timeless mode starts decoding on the fist PERF_RECORD_AUX record.
This can cause the "data has no samples!" error if the first
PERF_RECORD_AUX record comes before the first (or any relevant)
PERF_RECORD_MMAP2 record because the mmaps are required by the decoder
to access the binary data.
This change pushes the start of non-timeless decoding to the very end of
parsing the file. The PERF_RECORD_EXIT event can't be used because it
might not exist in system-wide or snapshot modes.
I have not been able to find the exact cause for the events to be
intermittently in the wrong order in the basic scenario:
perf record -e cs_etm/@tmc_etr0/u top
But it can be made to happen every time with the --delay option. This is
because "enable_on_exec" is disabled, which causes tracing to start
before the process to be launched is exec'd. For example:
perf record -e cs_etm/@tmc_etr0/u --delay=1 top
perf report -D | grep 'AUX\|MAP'
0 16714475632740 0x520 [0x40]: PERF_RECORD_AUX offset: 0 size: 0x30 flags: 0 []
0 16714476494960 0x5d0 [0x40]: PERF_RECORD_AUX offset: 0x30 size: 0x30 flags: 0 []
0 16714478208900 0x660 [0x40]: PERF_RECORD_AUX offset: 0x60 size: 0x30 flags: 0 []
4294967295 16714478293340 0x700 [0x70]: PERF_RECORD_MMAP2 8712/8712: [0x557a460000(0x54000) @ 0 00:17 5329258 0]: r-xp /usr/bin/top
4294967295 16714478353020 0x770 [0x88]: PERF_RECORD_MMAP2 8712/8712: [0x7f86f72000(0x34000) @ 0 00:17 5214354 0]: r-xp /usr/lib/aarch64-linux-gnu/ld-2.31.so
Another scenario in which decoding from the first aux record fails is a
workload that forks. Although the aux record comes after 'bash', it
comes before 'top', which is what we are interested in. For example:
perf record -e cs_etm/@tmc_etr0/u -- bash -c top
perf report -D | grep 'AUX\|MAP'
4294967295 16853946421300 0x510 [0x70]: PERF_RECORD_MMAP2 8723/8723: [0x558f280000(0x142000) @ 0 00:17 5213953 0]: r-xp /usr/bin/bash
4294967295 16853946543560 0x580 [0x88]: PERF_RECORD_MMAP2 8723/8723: [0x7fbba6e000(0x34000) @ 0 00:17 5214354 0]: r-xp /usr/lib/aarch64-linux-gnu/ld-2.31.so
4294967295 16853946628420 0x608 [0x68]: PERF_RECORD_MMAP2 8723/8723: [0x7fbba9e000(0x1000) @ 0 00:00 0 0]: r-xp [vdso]
0 16853947067300 0x690 [0x40]: PERF_RECORD_AUX offset: 0 size: 0x3a60 flags: 0 []
...
0 16853966602580 0x1758 [0x40]: PERF_RECORD_AUX offset: 0xc2470 size: 0x30 flags: 0 []
4294967295 16853967119860 0x1818 [0x70]: PERF_RECORD_MMAP2 8723/8723: [0x5559e70000(0x54000) @ 0 00:17 5329258 0]: r-xp /usr/bin/top
4294967295 16853967181620 0x1888 [0x88]: PERF_RECORD_MMAP2 8723/8723: [0x7f9ed06000(0x34000) @ 0 00:17 5214354 0]: r-xp /usr/lib/aarch64-linux-gnu/ld-2.31.so
4294967295 16853967237180 0x1910 [0x68]: PERF_RECORD_MMAP2 8723/8723: [0x7f9ed36000(0x1000) @ 0 00:00 0 0]: r-xp [vdso]
A third scenario is when the majority of time is spent in a shared
library that is not loaded at startup. For example a dynamically loaded
plugin.
Testing
=======
Testing was done by checking if any samples that are present in the
old output are missing from the new output. Timestamps must be
stripped out with awk because now they are set to the last AUX sample,
rather than the first:
./perf script $4 | awk '!($4="")' > new.script
./perf-default script $4 | awk '!($4="")' > default.script
comm -13 <(sort -u new.script) <(sort -u default.script)
Testing showed that the new output is a superset of the old. When lines
appear in the comm output, it is not because they are missing but
because [unknown] is now resolved to sensible locations. For example
last putp branch here now resolves to libtinfo, so it's not missing
from the output, but is actually improved:
Old:
top 305 [001] 1 branches:uH: 402830 _init+0x30 (/usr/bin/top.procps) => 404a1c [unknown] (/usr/bin/top.procps)
top 305 [001] 1 branches:uH: 404a20 [unknown] (/usr/bin/top.procps) => 402970 putp@plt+0x0 (/usr/bin/top.procps)
top 305 [001] 1 branches:uH: 40297c putp@plt+0xc (/usr/bin/top.procps) => 0 [unknown] ([unknown])
New:
top 305 [001] 1 branches:uH: 402830 _init+0x30 (/usr/bin/top.procps) => 404a1c [unknown] (/usr/bin/top.procps)
top 305 [001] 1 branches:uH: 404a20 [unknown] (/usr/bin/top.procps) => 402970 putp@plt+0x0 (/usr/bin/top.procps)
top 305 [001] 1 branches:uH: 40297c putp@plt+0xc (/usr/bin/top.procps) => 7f8ab39208 putp+0x0 (/lib/libtinfo.so.5.9)
In the following two modes, decoding now works and the "data has no
samples!" error is not displayed any more:
perf record -e cs_etm/@tmc_etr0/u -- bash -c top
perf record -e cs_etm/@tmc_etr0/u --delay=1 top
In snapshot mode, there is also an improvement to decoding. Previously
samples for the 'kill' process that was used to send SIGUSR2 were
completely missing, because the process hadn't started yet. But now
there are additional samples present:
perf record -e cs_etm/@tmc_etr0/u --snapshot -a
perf script
stress 19380 [003] 161627.938153: 1000000 instructions:uH: aaaabb612fb4 [unknown] (/usr/bin/stress)
kill 19644 [000] 161627.938153: 1000000 instructions:uH: ffffae0ef210 [unknown] (/lib/aarch64-linux-gnu/ld-2.27.so)
stress 19380 [003] 161627.938153: 1000000 instructions:uH: ffff9e754d40 random_r+0x20 (/lib/aarch64-linux-gnu/libc-2.27.so)
Also tested was the round trip of 'perf inject' followed by 'perf
report' which has the same differences and improvements.
Signed-off-by: James Clark <james.clark@arm.com>
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Tested-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Al Grant <al.grant@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Branislav Rankov <branislav.rankov@arm.com>
Cc: Denis Nikitin <denik@chromium.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lore.kernel.org/lkml/20210609130421.13934-1-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pick up the changes from:
59d21d67f37481cf ("KVM: SVM: Software reserved fields")
Picking the new SVM_EXIT_SW exit reasons.
Addressing this perf build warning:
Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/svm.h' differs from latest version at 'arch/x86/include/uapi/asm/svm.h'
diff -u tools/arch/x86/include/uapi/asm/svm.h arch/x86/include/uapi/asm/svm.h
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Vineeth Pillai <viremana@linux.microsoft.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pick the changes from:
f0376edb1ddcab19 ("KVM: arm64: Add ioctl to fetch/store tags in a guest")
That don't causes any changes in tooling (when built on x86), only
addresses this perf build warning:
Warning: Kernel ABI header at 'tools/arch/arm64/include/uapi/asm/kvm.h' differs from latest version at 'arch/arm64/include/uapi/asm/kvm.h'
diff -u tools/arch/arm64/include/uapi/asm/kvm.h arch/arm64/include/uapi/asm/kvm.h
Cc: Marc Zyngier <maz@kernel.org>
Cc: Steven Price <steven.price@arm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pick the changes in:
19238e75bd8ed8ff ("kvm: x86: Allow userspace to handle emulation errors")
cb082bfab59a224a ("KVM: stats: Add fd-based API to read binary stats data")
b87cc116c7e1bc62 ("KVM: PPC: Book3S HV: Add KVM_CAP_PPC_RPT_INVALIDATE capability")
f0376edb1ddcab19 ("KVM: arm64: Add ioctl to fetch/store tags in a guest")
0dbb11230437895f ("KVM: X86: Introduce KVM_HC_MAP_GPA_RANGE hypercall")
6dba940352038b56 ("KVM: x86: Introduce KVM_GET_SREGS2 / KVM_SET_SREGS2")
644f706719f0297b ("KVM: x86: hyper-v: Introduce KVM_CAP_HYPERV_ENFORCE_CPUID")
That automatically adds support for these new ioctls:
$ tools/perf/trace/beauty/kvm_ioctl.sh > before
$ cp include/uapi/linux/kvm.h tools/include/uapi/linux/kvm.h
$ tools/perf/trace/beauty/kvm_ioctl.sh > after
$ diff -u before after
--- before 2021-07-01 13:42:07.006387354 -0300
+++ after 2021-07-01 13:45:16.051649301 -0300
@@ -95,6 +95,9 @@
[0xc9] = "XEN_HVM_SET_ATTR",
[0xca] = "XEN_VCPU_GET_ATTR",
[0xcb] = "XEN_VCPU_SET_ATTR",
+ [0xcc] = "GET_SREGS2",
+ [0xcd] = "SET_SREGS2",
+ [0xce] = "GET_STATS_FD",
[0xe0] = "CREATE_DEVICE",
[0xe1] = "SET_DEVICE_ATTR",
[0xe2] = "GET_DEVICE_ATTR",
$
This silences these perf build warning:
Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/kvm.h' differs from latest version at 'arch/x86/include/uapi/asm/kvm.h'
diff -u tools/arch/x86/include/uapi/asm/kvm.h arch/x86/include/uapi/asm/kvm.h
Warning: Kernel ABI header at 'tools/include/uapi/linux/kvm.h' differs from latest version at 'include/uapi/linux/kvm.h'
diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h
Cc: Aaron Lewis <aaronlewis@google.com>
Cc: Ashish Kalra <ashish.kalra@amd.com>
Cc: Bharata B Rao <bharata@linux.ibm.com>
Cc: Jing Zhang <jingzhangos@google.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Maxim Levitsky <mlevitsk@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Steven Price <steven.price@arm.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pick the changes from:
1348924ba8169f35 ("x86/msr: Define new bits in TSX_FORCE_ABORT MSR")
cbcddaa33d7e11a0 ("perf/x86/rapl: Use CPUID bit on AMD and Hygon parts")
This only causes these perf files to be rebuilt:
CC /tmp/build/perf/bench/mem-memcpy-x86-64-asm.o
CC /tmp/build/perf/bench/mem-memset-x86-64-asm.o
And addresses this perf build warning:
Warning: Kernel ABI header at 'tools/arch/x86/include/asm/cpufeatures.h' differs from latest version at 'arch/x86/include/asm/cpufeatures.h'
diff -u tools/arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/cpufeatures.h
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pick the changes from:
dd8b477f9a3d8edb ("mount: Support "nosymfollow" in new mount api")
That ends up adding support for the new MOUNT_ATTR_NOSYMFOLLOW mount
attribute:
$ tools/perf/trace/beauty/fsmount.sh > before
$ cp include/uapi/linux/mount.h tools/include/uapi/linux/mount.h
$ tools/perf/trace/beauty/fsmount.sh > after
$ diff -u before after
--- before 2021-07-01 13:34:04.542517355 -0300
+++ after 2021-07-01 13:34:12.423694537 -0300
@@ -7,4 +7,5 @@
[ilog2(0x00000020) + 1] = "STRICTATIME",
[ilog2(0x00000080) + 1] = "NODIRATIME",
[ilog2(0x00100000) + 1] = "IDMAP",
+ [ilog2(0x00200000) + 1] = "NOSYMFOLLOW",
};
$
So now one can use it in --filter expressions for tracepoints.
This silences this perf build warnings:
Warning: Kernel ABI header at 'tools/include/uapi/linux/mount.h' differs from latest version at 'include/uapi/linux/mount.h'
diff -u tools/include/uapi/linux/mount.h include/uapi/linux/mount.h
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pick up the changes from these csets:
1348924ba8169f35 ("x86/msr: Define new bits in TSX_FORCE_ABORT MSR")
That cause no changes to tooling:
$ tools/perf/trace/beauty/tracepoints/x86_msr.sh > before
$ cp arch/x86/include/asm/msr-index.h tools/arch/x86/include/asm/msr-index.h
$ tools/perf/trace/beauty/tracepoints/x86_msr.sh > after
$ diff -u before after
$
Just silences this perf build warning:
Warning: Kernel ABI header at 'tools/arch/x86/include/asm/msr-index.h' differs from latest version at 'arch/x86/include/asm/msr-index.h'
diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h
Cc: Borislav Petkov <bp@suse.de>
Cc: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When decode Arm SPE trace, it waits for PERF_RECORD_EXIT event (the last
perf event) for processing trace data, which is needless and even might
cause logic error, e.g. it might fail to correlate perf events with Arm
SPE events correctly.
So this patch removes the condition checking for PERF_RECORD_EXIT event.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: James Clark <james.clark@arm.com>
Tested-by: James Clark <james.clark@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Al Grant <Al.Grant@arm.com>
Cc: Dave Martin <Dave.Martin@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210519071939.1598923-6-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
It's possible that record in Arm SPE trace is later than perf event and
vice versa. This asks to correlate the perf events and Arm SPE
synthesized events to be processed in the manner of correct timing.
To achieve the time ordering, this patch reverses the flow, it firstly
calls arm_spe_sample() and then calls arm_spe_decode(). By comparing
the timestamp value and detect the perf event is coming earlier than Arm
SPE trace data, it bails out from the decoding loop, the last record is
pushed into auxtrace stack and is deferred to generate sample. To track
the timestamp, everytime it updates timestamp for the latest record.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: James Clark <james.clark@arm.com>
Tested-by: James Clark <james.clark@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Al Grant <Al.Grant@arm.com>
Cc: Dave Martin <Dave.Martin@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20210519071939.1598923-5-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
In current code, it assigns the arch timer counter to the synthesized
samples Arm SPE trace, thus the samples don't contain the kernel time
but only contain the raw counter value.
To fix the issue, this patch converts the timer counter to kernel time
and assigns it to sample timestamp.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: James Clark <james.clark@arm.com>
Tested-by: James Clark <james.clark@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Al Grant <Al.Grant@arm.com>
Cc: Dave Martin <Dave.Martin@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20210519071939.1598923-4-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When handle a perf event, Arm SPE decoder needs to decide if this perf
event is earlier or later than the samples from Arm SPE trace data; to
do comparision, it needs to use the same unit for the time.
This patch converts the event kernel time to arch timer's counter value,
thus it can be used to compare with counter value contained in Arm SPE
Timestamp packet.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: James Clark <james.clark@arm.com>
Tested-by: James Clark <james.clark@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Al Grant <Al.Grant@arm.com>
Cc: Dave Martin <Dave.Martin@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20210519071939.1598923-3-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
During the recording phase, "perf record" tool synthesizes event
PERF_RECORD_TIME_CONV for the hardware clock parameters and saves the
event into the data file.
Afterwards, when processing the data file, the event TIME_CONV will be
processed at the very early time and is stored into session context.
This patch extracts these parameters from the session context and saves
into the structure "spe->tc" with the type perf_tsc_conversion, so that
the parameters are ready for conversion between clock counter and time
stamp.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: James Clark <james.clark@arm.com>
Tested-by: James Clark <james.clark@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Al Grant <Al.Grant@arm.com>
Cc: Dave Martin <Dave.Martin@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20210519071939.1598923-2-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The callback cs_etm_find_snapshot() is invoked for snapshot mode, its
main purpose is to find the correct AUX trace data and returns "head"
and "old" (we can call "old" as "old head") to the caller, the caller
__auxtrace_mmap__read() uses these two pointers to decide the AUX trace
data size.
This patch removes cs_etm_find_snapshot() with below reasons:
- The first thing in cs_etm_find_snapshot() is to check if the head has
wrapped around, if it is not, directly bails out. The checking is
pointless, this is because the "head" and "old" pointers both are
monotonical increasing so they never wrap around.
- cs_etm_find_snapshot() adjusts the "head" and "old" pointers and
assumes the AUX ring buffer is fully filled with the hardware trace
data, so it always subtracts the difference "mm->len" from "head" to
get "old". Let's imagine the snapshot is taken in very short
interval, the tracers only fill a small chunk of the trace data into
the AUX ring buffer, in this case, it's wrongly to copy the whole the
AUX ring buffer to perf file.
- As the "head" and "old" pointers are monotonically increased, the
function __auxtrace_mmap__read() handles these two pointers properly.
It calculates the reminders for these two pointers, and the size is
clamped to be never more than "snapshot_size". We can simply reply on
the function __auxtrace_mmap__read() to calculate the correct result
for data copying, it's not necessary to add Arm CoreSight specific
callback.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: James Clark <james.clark@arm.com>
Tested-by: James Clark <james.clark@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Daniel Kiss <daniel.kiss@arm.com>
Cc: Denis Nikitin <denik@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: coresight@lists.linaro.org
Link: http://lore.kernel.org/lkml/20210701093537.90759-3-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Some helper functions will be used for cgroup counting too. Move them
to a header file for sharing.
Committer notes:
Fix the build on older systems with:
- struct bpf_map_info map_info = {0};
+ struct bpf_map_info map_info = { .id = 0, };
This wasn't breaking the build in such systems as bpf_counter.c isn't
built due to:
tools/perf/util/Build:
perf-$(CONFIG_PERF_BPF_SKEL) += bpf_counter.o
The bpf_counter.h file on the other hand is included from places that
are built everywhere.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20210625071826.608504-4-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull misc fs updates from Jan Kara:
"The new quotactl_fd() syscall (remake of quotactl_path() syscall that
got introduced & disabled in 5.13 cycle), and couple of udf, reiserfs,
isofs, and writeback fixes and cleanups"
* tag 'fs_for_v5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
writeback: fix obtain a reference to a freeing memcg css
quota: remove unnecessary oom message
isofs: remove redundant continue statement
quota: Wire up quotactl_fd syscall
quota: Change quotactl_path() systcall to an fd-based one
reiserfs: Remove unneed check in reiserfs_write_full_page()
udf: Fix NULL pointer dereference in udf_symlink function
reiserfs: add check for invalid 1st journal block
|
|
Marek Behún says:
====================
dsa: mv88e6xxx: Topaz fixes
here comes some fixes for the Topaz family (Marvell 88E6141 / 88E6341)
which I found out about when I compared the Topaz' operations
structure with that one of Peridot (6390).
This is v2. In v1, I accidentally sent patches generated from wrong
branch and the 5th patch does not contain a necessary change in
serdes.c.
Changes from v1:
- the fifth patch, "enable SerDes RX stats for Topaz", needs another
change in serdes.c
- Andrew's Reviewed-by to 1,2,3,4 and 6
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit bf3504cea7d7e ("net: dsa: mv88e6xxx: Add 6390 family PCS
registers to ethtool -d") added support for dumping SerDes PCS registers
via ethtool -d for Peridot.
The same implementation is also valid for Topaz, but was not
enabled at the time.
Signed-off-by: Marek Behún <kabel@kernel.org>
Fixes: bf3504cea7d7e ("net: dsa: mv88e6xxx: Add 6390 family PCS registers to ethtool -d")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit 0df952873636a ("mv88e6xxx: Add serdes Rx statistics") added
support for RX statistics on SerDes ports for Peridot.
This same implementation is also valid for Topaz, but was not enabled
at the time.
We need to use the generic .serdes_get_lane() method instead of the
Peridot specific one in the stats methods so that on Topaz the proper
one is used.
Signed-off-by: Marek Behún <kabel@kernel.org>
Fixes: 0df952873636a ("mv88e6xxx: Add serdes Rx statistics")
Signed-off-by: David S. Miller <davem@davemloft.net>
|
