| Age | Commit message (Collapse) | Author |
|---|
|
sev_guest.h currently contains various definitions relating to the
format of SNP_GUEST_REQUEST commands to SNP firmware. Currently only the
sev-guest driver makes use of them, but when the KVM side of this is
implemented there's a need to parse the SNP_GUEST_REQUEST header to
determine whether additional information needs to be provided to the
guest. Prepare for this by moving those definitions to a common header
that's shared by host/guest code so that KVM can also make use of them.
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Message-ID: <20240701223148.3798365-3-michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Version 2 of GHCB specification added support for the SNP Guest Request
Message NAE event. The event allows for an SEV-SNP guest to make
requests to the SEV-SNP firmware through the hypervisor using the
SNP_GUEST_REQUEST API defined in the SEV-SNP firmware specification.
This is used by guests primarily to request attestation reports from
firmware. There are other request types are available as well, but the
specifics of what guest requests are being made generally does not
affect how they are handled by the hypervisor, which only serves as a
proxy for the guest requests and firmware responses.
Implement handling for these events.
When an SNP Guest Request is issued, the guest will provide its own
request/response pages, which could in theory be passed along directly
to firmware. However, these pages would need special care:
- Both pages are from shared guest memory, so they need to be
protected from migration/etc. occurring while firmware reads/writes
to them. At a minimum, this requires elevating the ref counts and
potentially needing an explicit pinning of the memory. This places
additional restrictions on what type of memory backends userspace
can use for shared guest memory since there would be some reliance
on using refcounted pages.
- The response page needs to be switched to Firmware-owned state
before the firmware can write to it, which can lead to potential
host RMP #PFs if the guest is misbehaved and hands the host a
guest page that KVM is writing to for other reasons (e.g. virtio
buffers).
Both of these issues can be avoided completely by using
separately-allocated bounce pages for both the request/response pages
and passing those to firmware instead. So that's the approach taken
here.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Co-developed-by: Alexey Kardashevskiy <aik@amd.com>
Signed-off-by: Alexey Kardashevskiy <aik@amd.com>
Co-developed-by: Ashish Kalra <ashish.kalra@amd.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
[mdr: ensure FW command failures are indicated to guest, drop extended
request handling to be re-written as separate patch, massage commit]
Signed-off-by: Michael Roth <michael.roth@amd.com>
Message-ID: <20240701223148.3798365-2-michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
There is a spelling mistake in a netdev_warn message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://patch.msgid.link/20240716093851.1003131-1-colin.i.king@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As per TP4141a:
"If the Qualified Protection Information Format Support(QPIFS) bit is
set to 1 and the Protection Information Format(PIF) field is set to 11b
(i.e., Qualified Type), then the pif is as defined in the Qualified
Protection Information Format (QPIF) field."
So, choose PIF from QPIF if QPIFS supports and PIF is QTYPE.
Signed-off-by: Francis Pravin <francis.p@samsung.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Replace the deprecated[1] uses of strncpy() in tcp_ca_get_name_by_key()
and tcp_get_default_congestion_control(). The callers use the results as
standard C strings (via nla_put_string() and proc handlers respectively),
so trailing padding is not needed.
Since passing the destination buffer arguments decays it to a pointer,
the size can't be trivially determined by the compiler. ca->name is
the same length in both cases, so strscpy() won't fail (when ca->name
is NUL-terminated). Include the length explicitly instead of using the
2-argument strscpy().
Link: https://github.com/KSPP/linux/issues/90 [1]
Signed-off-by: Kees Cook <kees@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20240714041111.it.918-kees@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
gcc 11.4.1-3 warns about memcpy() with overlapping pointers:
drivers/net/wireless/ath/ath12k/wow.c: In function ‘ath12k_wow_convert_8023_to_80211.constprop’:
./include/linux/fortify-string.h:114:33: error: ‘__builtin_memcpy’ accessing 18446744073709551611 or more bytes at offsets 0 and 0 overlaps 9223372036854775799 bytes at offset -9223372036854775804 [-Werror=restrict]
114 | #define __underlying_memcpy __builtin_memcpy
| ^
./include/linux/fortify-string.h:637:9: note: in expansion of macro ‘__underlying_memcpy’
637 | __underlying_##op(p, q, __fortify_size); \
| ^~~~~~~~~~~~~
./include/linux/fortify-string.h:682:26: note: in expansion of macro ‘__fortify_memcpy_chk’
682 | #define memcpy(p, q, s) __fortify_memcpy_chk(p, q, s, \
| ^~~~~~~~~~~~~~~~~~~~
drivers/net/wireless/ath/ath12k/wow.c:190:25: note: in expansion of macro ‘memcpy’
190 | memcpy(pat, eth_pat, eth_pat_len);
| ^~~~~~
./include/linux/fortify-string.h:114:33: error: ‘__builtin_memcpy’ accessing 18446744073709551605 or more bytes at offsets 0 and 0 overlaps 9223372036854775787 bytes at offset -9223372036854775798 [-Werror=restrict]
114 | #define __underlying_memcpy __builtin_memcpy
| ^
./include/linux/fortify-string.h:637:9: note: in expansion of macro ‘__underlying_memcpy’
637 | __underlying_##op(p, q, __fortify_size); \
| ^~~~~~~~~~~~~
./include/linux/fortify-string.h:682:26: note: in expansion of macro ‘__fortify_memcpy_chk’
682 | #define memcpy(p, q, s) __fortify_memcpy_chk(p, q, s, \
| ^~~~~~~~~~~~~~~~~~~~
drivers/net/wireless/ath/ath12k/wow.c:232:25: note: in expansion of macro ‘memcpy’
232 | memcpy(pat, eth_pat, eth_pat_len);
| ^~~~~~
The sum of size_t operands can overflow SIZE_MAX, triggering the
warning.
Address the issue using the suitable helper.
Fixes: 4a3c212eee0e ("wifi: ath12k: add basic WoW functionalities")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Kees Cook <kees@kernel.org>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://patch.msgid.link/3175f87d7227e395b330fd88fb840c1645084ea7.1721127979.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The explanation for @handled_access_fs and @handled_access_net has
significant overlap and is better explained together.
* Explain the commonalities in structure-level documentation.
* Clarify some wording and break up longer sentences.
* Put emphasis on the word "handled" to make it clearer that "handled"
is a term with special meaning in the context of Landlock.
I'd like to transfer this wording into the man pages as well.
Signed-off-by: Günther Noack <gnoack@google.com>
Cc: Alejandro Colomar <alx@kernel.org>
Cc: Konstantin Meskhidze <konstantin.meskhidze@huawei.com>
Cc: linux-security-module@vger.kernel.org
Link: https://lore.kernel.org/r/20240711165456.2148590-2-gnoack@google.com
[mic: Format commit message]
Signed-off-by: Mickaël Salaün <mic@digikod.net>
|
|
Explicitly suppress userspace emulated MMIO exits that are triggered when
emulating a task switch as KVM doesn't support userspace MMIO during
complex (multi-step) emulation. Silently ignoring the exit request can
result in the WARN_ON_ONCE(vcpu->mmio_needed) firing if KVM exits to
userspace for some other reason prior to purging mmio_needed.
See commit 0dc902267cb3 ("KVM: x86: Suppress pending MMIO write exits if
emulator detects exception") for more details on KVM's limitations with
respect to emulated MMIO during complex emulator flows.
Reported-by: syzbot+2fb9f8ed752c01bc9a3f@syzkaller.appspotmail.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20240712144841.1230591-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Tweak the definition of make_huge_page_split_spte() to eliminate an
unnecessarily long line, and opportunistically initialize child_spte to
make it more obvious that the child is directly derived from the huge
parent.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20240712151335.1242633-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Bug the VM instead of simply warning if KVM tries to split a SPTE that is
non-present or not-huge. KVM is guaranteed to end up in a broken state as
the callers fully expect a valid SPTE, e.g. the shadow MMU will add an
rmap entry, and all MMUs will account the expected small page. Returning
'0' is also technically wrong now that SHADOW_NONPRESENT_VALUE exists,
i.e. would cause KVM to create a potential #VE SPTE.
While it would be possible to have the callers gracefully handle failure,
doing so would provide no practical value as the scenario really should be
impossible, while the error handling would add a non-trivial amount of
noise.
Fixes: a3fe5dbda0a4 ("KVM: x86/mmu: Split huge pages mapped by the TDP MMU when dirty logging is enabled")
Cc: David Matlack <dmatlack@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20240712151335.1242633-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
KVM VMX changes for 6.11
- Remove an unnecessary EPT TLB flush when enabling hardware.
- Fix a series of bugs that cause KVM to fail to detect nested pending posted
interrupts as valid wake eents for a vCPU executing HLT in L2 (with
HLT-exiting disable by L1).
- Misc cleanups
|
|
KVM SVM changes for 6.11
- Make per-CPU save_area allocations NUMA-aware.
- Force sev_es_host_save_area() to be inlined to avoid calling into an
instrumentable function from noinstr code.
|
|
KVM selftests for 6.11
- Remove dead code in the memslot modification stress test.
- Treat "branch instructions retired" as supported on all AMD Family 17h+ CPUs.
- Print the guest pseudo-RNG seed only when it changes, to avoid spamming the
log for tests that create lots of VMs.
- Make the PMU counters test less flaky when counting LLC cache misses by
doing CLFLUSH{OPT} in every loop iteration.
|
|
KVM x86/pmu changes for 6.11
- Don't advertise IA32_PERF_GLOBAL_OVF_CTRL as an MSR-to-be-saved, as it reads
'0' and writes from userspace are ignored.
- Update to the newfangled Intel CPU FMS infrastructure.
- Use macros instead of open-coded literals to clean up KVM's manipulation of
FIXED_CTR_CTRL MSRs.
|
|
KVM x86 MTRR virtualization removal
Remove support for virtualizing MTRRs on Intel CPUs, along with a nasty CR0.CD
hack, and instead always honor guest PAT on CPUs that support self-snoop.
|
|
KVM x86 MMU changes for 6.11
- Don't allocate kvm_mmu_page.shadowed_translation for shadow pages that can't
hold leafs SPTEs.
- Unconditionally drop mmu_lock when allocating TDP MMU page tables for eager
page splitting to avoid stalling vCPUs when splitting huge pages.
- Misc cleanups
|
|
KVM x86 misc changes for 6.11
- Add a global struct to consolidate tracking of host values, e.g. EFER, and
move "shadow_phys_bits" into the structure as "maxphyaddr".
- Add KVM_CAP_X86_APIC_BUS_CYCLES_NS to allow configuring the effective APIC
bus frequency, because TDX.
- Print the name of the APICv/AVIC inhibits in the relevant tracepoint.
- Clean up KVM's handling of vendor specific emulation to consistently act on
"compatible with Intel/AMD", versus checking for a specific vendor.
- Misc cleanups
|
|
KVM generic changes for 6.11
- Enable halt poll shrinking by default, as Intel found it to be a clear win.
- Setup empty IRQ routing when creating a VM to avoid having to synchronize
SRCU when creating a split IRQCHIP on x86.
- Rework the sched_in/out() paths to replace kvm_arch_sched_in() with a flag
that arch code can use for hooking both sched_in() and sched_out().
- Take the vCPU @id as an "unsigned long" instead of "u32" to avoid
truncating a bogus value from userspace, e.g. to help userspace detect bugs.
- Mark a vCPU as preempted if and only if it's scheduled out while in the
KVM_RUN loop, e.g. to avoid marking it preempted and thus writing guest
memory when retrieving guest state during live migration blackout.
- A few minor cleanups
|
|
KVM Xen:
Fix a bug where KVM fails to check the validity of an incoming userspace
virtual address and tries to activate a gfn_to_pfn_cache with a kernel address.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 changes for 6.11
- Initial infrastructure for shadow stage-2 MMUs, as part of nested
virtualization enablement
- Support for userspace changes to the guest CTR_EL0 value, enabling
(in part) migration of VMs between heterogenous hardware
- Fixes + improvements to pKVM's FF-A proxy, adding support for v1.1 of
the protocol
- FPSIMD/SVE support for nested, including merged trap configuration
and exception routing
- New command-line parameter to control the WFx trap behavior under KVM
- Introduce kCFI hardening in the EL2 hypervisor
- Fixes + cleanups for handling presence/absence of FEAT_TCRX
- Miscellaneous fixes + documentation updates
|
|
Dereference auth after NULL check in tpm_buf_check_hmac_response().
Otherwise, unless tpm2_sessions_init() was called, a call can cause NULL
dereference, when TCG_TPM2_HMAC is enabled.
[jarkko: adjusted the commit message.]
Cc: stable@vger.kernel.org # v6.10+
Fixes: 7ca110f2679b ("tpm: Address !chip->auth in tpm_buf_append_hmac_session*()")
Signed-off-by: Hao Ge <gehao@kylinos.cn>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
- Rewrite of HID-BPF internal implementation to use bpf struct_ops
instead of tracing (Benjamin Tissoires)
- Add new HID-BPF hooks to be able to intercept userspace calls
targetting a HID device and filtering them (Benjamin Tissoires)
- Add support for various new devices through HID-BPF filters (Benjamin
Tissoires)
|
|
Couple of hid-uclogic fixes by José Expósito:
- Support HUION devices with up to 20 buttons
- Use Rx and Ry for touch strips
|
|
Cleanup unused functions in hid-nintendo by Jiapeng Chong
|
|
Couple of minor fixes on intel-ish-hid by Jeff Johnson:
- add missing MODULE_DESCRIPTION
- add missing doctext entry
|
|
Add support for the magic keyboard backlight (Orlando Chamberlain)
|
|
Couple of trivial fixes:
- extra semicolon (Chen Ni)
- typo (Thorsten Blum)
|
|
- add a bunch of missing MODULE_DESCRIPTION (Jeff Johnson)
|
|
Couple of fixes for HID-core:
- use of kvzalloc in case memory gets too fragmented (Hailong Liu)
- retrieve the device firmware node in the child HID device (Danny
Kaehn)
|
|
Add uprobes entry to MAINTAINERS to clarify the maintainers.
Link: https://lore.kernel.org/all/172074397710.247544.17045299807723238107.stgit@devnote2/
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Oleg Nesterov <oleg@redhat.com>
|
|
syzkaller reported KMSAN splat in tcp_create_openreq_child(). [0]
The uninit variable is tcp_rsk(req)->ao_keyid.
tcp_rsk(req)->ao_keyid is initialised only when tcp_conn_request() finds
a valid TCP AO option in SYN. Then, tcp_rsk(req)->used_tcp_ao is set
accordingly.
Let's not read tcp_rsk(req)->ao_keyid when tcp_rsk(req)->used_tcp_ao is
false.
[0]:
BUG: KMSAN: uninit-value in tcp_create_openreq_child+0x198b/0x1ff0 net/ipv4/tcp_minisocks.c:610
tcp_create_openreq_child+0x198b/0x1ff0 net/ipv4/tcp_minisocks.c:610
tcp_v4_syn_recv_sock+0x18e/0x2170 net/ipv4/tcp_ipv4.c:1754
tcp_check_req+0x1a3e/0x20c0 net/ipv4/tcp_minisocks.c:852
tcp_v4_rcv+0x26a4/0x53a0 net/ipv4/tcp_ipv4.c:2265
ip_protocol_deliver_rcu+0x884/0x1270 net/ipv4/ip_input.c:205
ip_local_deliver_finish+0x30f/0x530 net/ipv4/ip_input.c:233
NF_HOOK include/linux/netfilter.h:314 [inline]
ip_local_deliver+0x230/0x4c0 net/ipv4/ip_input.c:254
dst_input include/net/dst.h:460 [inline]
ip_sublist_rcv_finish net/ipv4/ip_input.c:580 [inline]
ip_list_rcv_finish net/ipv4/ip_input.c:631 [inline]
ip_sublist_rcv+0x10f7/0x13e0 net/ipv4/ip_input.c:639
ip_list_rcv+0x952/0x9c0 net/ipv4/ip_input.c:674
__netif_receive_skb_list_ptype net/core/dev.c:5703 [inline]
__netif_receive_skb_list_core+0xd92/0x11d0 net/core/dev.c:5751
__netif_receive_skb_list net/core/dev.c:5803 [inline]
netif_receive_skb_list_internal+0xd8f/0x1350 net/core/dev.c:5895
gro_normal_list include/net/gro.h:515 [inline]
napi_complete_done+0x3f2/0x990 net/core/dev.c:6246
e1000_clean+0x1fa4/0x5e50 drivers/net/ethernet/intel/e1000/e1000_main.c:3808
__napi_poll+0xd9/0x990 net/core/dev.c:6771
napi_poll net/core/dev.c:6840 [inline]
net_rx_action+0x90f/0x17e0 net/core/dev.c:6962
handle_softirqs+0x152/0x6b0 kernel/softirq.c:554
__do_softirq kernel/softirq.c:588 [inline]
invoke_softirq kernel/softirq.c:428 [inline]
__irq_exit_rcu kernel/softirq.c:637 [inline]
irq_exit_rcu+0x5d/0x120 kernel/softirq.c:649
common_interrupt+0x83/0x90 arch/x86/kernel/irq.c:278
asm_common_interrupt+0x26/0x40 arch/x86/include/asm/idtentry.h:693
__msan_instrument_asm_store+0xd6/0xe0
arch_atomic_inc arch/x86/include/asm/atomic.h:53 [inline]
raw_atomic_inc include/linux/atomic/atomic-arch-fallback.h:992 [inline]
atomic_inc include/linux/atomic/atomic-instrumented.h:436 [inline]
page_ref_inc include/linux/page_ref.h:153 [inline]
folio_ref_inc include/linux/page_ref.h:160 [inline]
filemap_map_order0_folio mm/filemap.c:3596 [inline]
filemap_map_pages+0x11c7/0x2270 mm/filemap.c:3644
do_fault_around mm/memory.c:4879 [inline]
do_read_fault mm/memory.c:4912 [inline]
do_fault mm/memory.c:5051 [inline]
do_pte_missing mm/memory.c:3897 [inline]
handle_pte_fault mm/memory.c:5381 [inline]
__handle_mm_fault mm/memory.c:5524 [inline]
handle_mm_fault+0x3677/0x6f00 mm/memory.c:5689
do_user_addr_fault+0x1373/0x2b20 arch/x86/mm/fault.c:1338
handle_page_fault arch/x86/mm/fault.c:1481 [inline]
exc_page_fault+0x54/0xc0 arch/x86/mm/fault.c:1539
asm_exc_page_fault+0x26/0x30 arch/x86/include/asm/idtentry.h:623
Uninit was stored to memory at:
tcp_create_openreq_child+0x1984/0x1ff0 net/ipv4/tcp_minisocks.c:611
tcp_v4_syn_recv_sock+0x18e/0x2170 net/ipv4/tcp_ipv4.c:1754
tcp_check_req+0x1a3e/0x20c0 net/ipv4/tcp_minisocks.c:852
tcp_v4_rcv+0x26a4/0x53a0 net/ipv4/tcp_ipv4.c:2265
ip_protocol_deliver_rcu+0x884/0x1270 net/ipv4/ip_input.c:205
ip_local_deliver_finish+0x30f/0x530 net/ipv4/ip_input.c:233
NF_HOOK include/linux/netfilter.h:314 [inline]
ip_local_deliver+0x230/0x4c0 net/ipv4/ip_input.c:254
dst_input include/net/dst.h:460 [inline]
ip_sublist_rcv_finish net/ipv4/ip_input.c:580 [inline]
ip_list_rcv_finish net/ipv4/ip_input.c:631 [inline]
ip_sublist_rcv+0x10f7/0x13e0 net/ipv4/ip_input.c:639
ip_list_rcv+0x952/0x9c0 net/ipv4/ip_input.c:674
__netif_receive_skb_list_ptype net/core/dev.c:5703 [inline]
__netif_receive_skb_list_core+0xd92/0x11d0 net/core/dev.c:5751
__netif_receive_skb_list net/core/dev.c:5803 [inline]
netif_receive_skb_list_internal+0xd8f/0x1350 net/core/dev.c:5895
gro_normal_list include/net/gro.h:515 [inline]
napi_complete_done+0x3f2/0x990 net/core/dev.c:6246
e1000_clean+0x1fa4/0x5e50 drivers/net/ethernet/intel/e1000/e1000_main.c:3808
__napi_poll+0xd9/0x990 net/core/dev.c:6771
napi_poll net/core/dev.c:6840 [inline]
net_rx_action+0x90f/0x17e0 net/core/dev.c:6962
handle_softirqs+0x152/0x6b0 kernel/softirq.c:554
__do_softirq kernel/softirq.c:588 [inline]
invoke_softirq kernel/softirq.c:428 [inline]
__irq_exit_rcu kernel/softirq.c:637 [inline]
irq_exit_rcu+0x5d/0x120 kernel/softirq.c:649
common_interrupt+0x83/0x90 arch/x86/kernel/irq.c:278
asm_common_interrupt+0x26/0x40 arch/x86/include/asm/idtentry.h:693
Uninit was created at:
__alloc_pages_noprof+0x82d/0xcb0 mm/page_alloc.c:4706
__alloc_pages_node_noprof include/linux/gfp.h:269 [inline]
alloc_pages_node_noprof include/linux/gfp.h:296 [inline]
alloc_slab_page mm/slub.c:2265 [inline]
allocate_slab mm/slub.c:2428 [inline]
new_slab+0x2af/0x14e0 mm/slub.c:2481
___slab_alloc+0xf73/0x3150 mm/slub.c:3667
__slab_alloc mm/slub.c:3757 [inline]
__slab_alloc_node mm/slub.c:3810 [inline]
slab_alloc_node mm/slub.c:3990 [inline]
kmem_cache_alloc_noprof+0x53a/0x9f0 mm/slub.c:4009
reqsk_alloc_noprof net/ipv4/inet_connection_sock.c:920 [inline]
inet_reqsk_alloc+0x63/0x700 net/ipv4/inet_connection_sock.c:951
tcp_conn_request+0x339/0x4860 net/ipv4/tcp_input.c:7177
tcp_v4_conn_request+0x13b/0x190 net/ipv4/tcp_ipv4.c:1719
tcp_rcv_state_process+0x2dd/0x4a10 net/ipv4/tcp_input.c:6711
tcp_v4_do_rcv+0xbee/0x10d0 net/ipv4/tcp_ipv4.c:1932
tcp_v4_rcv+0x3fad/0x53a0 net/ipv4/tcp_ipv4.c:2334
ip_protocol_deliver_rcu+0x884/0x1270 net/ipv4/ip_input.c:205
ip_local_deliver_finish+0x30f/0x530 net/ipv4/ip_input.c:233
NF_HOOK include/linux/netfilter.h:314 [inline]
ip_local_deliver+0x230/0x4c0 net/ipv4/ip_input.c:254
dst_input include/net/dst.h:460 [inline]
ip_sublist_rcv_finish net/ipv4/ip_input.c:580 [inline]
ip_list_rcv_finish net/ipv4/ip_input.c:631 [inline]
ip_sublist_rcv+0x10f7/0x13e0 net/ipv4/ip_input.c:639
ip_list_rcv+0x952/0x9c0 net/ipv4/ip_input.c:674
__netif_receive_skb_list_ptype net/core/dev.c:5703 [inline]
__netif_receive_skb_list_core+0xd92/0x11d0 net/core/dev.c:5751
__netif_receive_skb_list net/core/dev.c:5803 [inline]
netif_receive_skb_list_internal+0xd8f/0x1350 net/core/dev.c:5895
gro_normal_list include/net/gro.h:515 [inline]
napi_complete_done+0x3f2/0x990 net/core/dev.c:6246
e1000_clean+0x1fa4/0x5e50 drivers/net/ethernet/intel/e1000/e1000_main.c:3808
__napi_poll+0xd9/0x990 net/core/dev.c:6771
napi_poll net/core/dev.c:6840 [inline]
net_rx_action+0x90f/0x17e0 net/core/dev.c:6962
handle_softirqs+0x152/0x6b0 kernel/softirq.c:554
__do_softirq kernel/softirq.c:588 [inline]
invoke_softirq kernel/softirq.c:428 [inline]
__irq_exit_rcu kernel/softirq.c:637 [inline]
irq_exit_rcu+0x5d/0x120 kernel/softirq.c:649
common_interrupt+0x83/0x90 arch/x86/kernel/irq.c:278
asm_common_interrupt+0x26/0x40 arch/x86/include/asm/idtentry.h:693
CPU: 0 PID: 239 Comm: modprobe Tainted: G B 6.10.0-rc7-01816-g852e42cc2dd4 #3 1107521f0c7b55c9309062382d0bda9f604dbb6d
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
Fixes: 06b22ef29591 ("net/tcp: Wire TCP-AO to request sockets")
Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Dmitry Safonov <0x7f454c46@gmail.com>
Link: https://patch.msgid.link/20240714161719.6528-1-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In kbd_rgb_mode_store the dev_get_drvdata() call was assuming the device
data was asus_wmi when it was actually led_classdev.
This patch corrects this by making the correct chain of calls to get the
asus_wmi driver data.
Fixes: ae834a549ec1 ("platform/x86: asus-wmi: add support variant of TUF RGB")
Tested-by: Denis Benato <benato.denis96@gmail.com>
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240716011130.17464-2-luke@ljones.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Smatch complains that 'str' can be used without being initialized:
drivers/platform/x86/intel/intel_plr_tpmi.c:178 plr_print_bits()
error: uninitialized symbol 'str'.
In this loop, we iterate over all the set bits and print the name of the
bit. The intention is that if there is a bit which is between 0-31 we
look for the name in the first array plr_coarse_reasons[] which has 10
elements. If the bit is in the 32-63 range we look for it in the
plr_fine_reasons[] array which has 30 elements. If the bit is in the
invalid ranges, 10-31 or 62-63, then we should print "UNKNOWN(%d)".
The problem is that 'str' needs to be initialized at the start of each
iteration, otherwise if we can't find the string then instead of printing
"UNKNOWN(%d)", we will re-print whatever the previous bit was.
Fixes: 9e9397a41b7b ("platform/x86/intel/tpmi/plr: Add support for the plr mailbox")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/b0084e70-4144-445a-9b89-fb19f6b8336a@stanley.mountain
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
pmf.rst was removed by the commit 2fd66f7d3b0d ("platform/x86/amd/pmf:
Remove update system state document") but the reference in the
admin-guide index remained in place which triggers this warning:
Documentation/admin-guide/index.rst:75: WARNING: toctree contains
reference to nonexisting document 'admin-guide/pmf'
Remove pmf also from the index to avoid the warning.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20240715104102.4615-1-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cpu model updates from Borislav Petkov:
- Flip the logic to add feature names to /proc/cpuinfo to having to
explicitly specify the flag if there's a valid reason to show it in
/proc/cpuinfo
- Switch a bunch of Intel x86 model checking code to the new CPU model
defines
- Fixes and cleanups
* tag 'x86_cpu_for_v6.11_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu/intel: Drop stray FAM6 check with new Intel CPU model defines
x86/cpufeatures: Flip the /proc/cpuinfo appearance logic
x86/CPU/AMD: Always inline amd_clear_divider()
x86/mce/inject: Add missing MODULE_DESCRIPTION() line
perf/x86/rapl: Switch to new Intel CPU model defines
x86/boot: Switch to new Intel CPU model defines
x86/cpu: Switch to new Intel CPU model defines
perf/x86/intel: Switch to new Intel CPU model defines
x86/virt/tdx: Switch to new Intel CPU model defines
x86/PCI: Switch to new Intel CPU model defines
x86/cpu/intel: Switch to new Intel CPU model defines
x86/platform/intel-mid: Switch to new Intel CPU model defines
x86/pconfig: Remove unused MKTME pconfig code
x86/cpu: Remove useless work in detect_tme_early()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cpu mitigation updates from Borislav Petkov:
- Add a spectre_bhi=vmexit mitigation option aimed at cloud
environments
- Remove duplicated Spectre cmdline option documentation
- Add separate macro definitions for syscall handlers which do not
return in order to address objtool warnings
* tag 'x86_bugs_for_v6.11_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/bugs: Add 'spectre_bhi=vmexit' cmdline option
x86/bugs: Remove duplicate Spectre cmdline option descriptions
x86/syscall: Mark exit[_group] syscall handlers __noreturn
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 vmware updates from Borislav Petkov:
- Add a unified VMware hypercall API layer which should be used by all
callers instead of them doing homegrown solutions. This will provide
for adding API support for confidential computing solutions like TDX
* tag 'x86_vmware_for_v6.11_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/vmware: Add TDX hypercall support
x86/vmware: Remove legacy VMWARE_HYPERCALL* macros
x86/vmware: Correct macro names
x86/vmware: Use VMware hypercall API
drm/vmwgfx: Use VMware hypercall API
input/vmmouse: Use VMware hypercall API
ptp/vmware: Use VMware hypercall API
x86/vmware: Introduce VMware hypercall API
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc x86 updates from Borislav Petkov:
- Make error checking of AMD SMN accesses more robust in the callers as
they're the only ones who can interpret the results properly
- The usual cleanups and fixes, left and right
* tag 'x86_misc_for_v6.11_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/kmsan: Fix hook for unaligned accesses
x86/platform/iosf_mbi: Convert PCIBIOS_* return codes to errnos
x86/pci/xen: Fix PCIBIOS_* return code handling
x86/pci/intel_mid_pci: Fix PCIBIOS_* return code handling
x86/of: Return consistent error type from x86_of_pci_irq_enable()
hwmon: (k10temp) Rename _data variable
hwmon: (k10temp) Remove unused HAVE_TDIE() macro
hwmon: (k10temp) Reduce k10temp_get_ccd_support() parameters
hwmon: (k10temp) Define a helper function to read CCD temperature
x86/amd_nb: Enhance SMN access error checking
hwmon: (k10temp) Check return value of amd_smn_read()
EDAC/amd64: Check return value of amd_smn_read()
EDAC/amd64: Remove unused register accesses
tools/x86/kcpuid: Add missing dir via Makefile
x86, arm: Add missing license tag to syscall tables files
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 build update from Borislav Petkov:
- Make sure insn support detection uses the proper compiler flag in
bi-arch builds
* tag 'x86_build_for_v6.11_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/kconfig: Add as-instr64 macro to properly evaluate AS_WRUSS
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 uaccess update from Borislav Petkov:
- Cleanup the 8-byte getuser() asm case
* tag 'x86_core_for_v6.11_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/uaccess: Improve the 8-byte getuser() case
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 confidential computing updates from Borislav Petkov:
"Unrelated x86/cc changes queued here to avoid ugly cross-merges and
conflicts:
- Carve out CPU hotplug function declarations into a separate header
with the goal to be able to use the lockdep assertions in a more
flexible manner
- As a result, refactor cacheinfo code after carving out a function
to return the cache ID associated with a given cache level
- Cleanups
Add support to be able to kexec TDX guests:
- Expand ACPI MADT CPU offlining support
- Add machinery to prepare CoCo guests memory before kexec-ing into a
new kernel
- Cleanup, readjust and massage related code"
* tag 'x86_cc_for_v6.11_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
ACPI: tables: Print MULTIPROC_WAKEUP when MADT is parsed
x86/acpi: Add support for CPU offlining for ACPI MADT wakeup method
x86/mm: Introduce kernel_ident_mapping_free()
x86/smp: Add smp_ops.stop_this_cpu() callback
x86/acpi: Do not attempt to bring up secondary CPUs in the kexec case
x86/acpi: Rename fields in the acpi_madt_multiproc_wakeup structure
x86/mm: Do not zap page table entries mapping unaccepted memory table during kdump
x86/mm: Make e820__end_ram_pfn() cover E820_TYPE_ACPI ranges
x86/tdx: Convert shared memory back to private on kexec
x86/mm: Add callbacks to prepare encrypted memory for kexec
x86/tdx: Account shared memory
x86/mm: Return correct level from lookup_address() if pte is none
x86/mm: Make x86_platform.guest.enc_status_change_*() return an error
x86/kexec: Keep CR4.MCE set during kexec for TDX guest
x86/relocate_kernel: Use named labels for less confusion
cpu/hotplug, x86/acpi: Disable CPU offlining for ACPI MADT wakeup
cpu/hotplug: Add support for declaring CPU offlining not supported
x86/apic: Mark acpi_mp_wake_* variables as __ro_after_init
x86/acpi: Extract ACPI MADT wakeup code into a separate file
x86/kexec: Remove spurious unconditional JMP from from identity_mapped()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cleanups from Borislav Petkov:
- Remove an unused function and the documentation of an already removed
cmdline parameter
* tag 'x86_cleanups_for_v6.11_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/boot: Remove unused function __fortify_panic()
Documentation: Remove "mfgpt_irq=" from the kernel-parameters.txt file
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 boot updates from Borislav Petkov:
- Add a check to warn when cmdline parsing happens before the final
cmdline string has been built and thus arguments can get lost
- Code cleanups and simplifications
* tag 'x86_boot_for_v6.11_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/setup: Warn when option parsing is done too early
x86/boot: Clean up the arch/x86/boot/main.c code a bit
x86/boot: Use current_stack_pointer to avoid asm() in init_heap()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 alternatives updates from Borislav Petkov:
"This is basically PeterZ's idea to nest the alternative macros to
avoid the need to "spell out" the number of alternates in an
ALTERNATIVE_n() macro and thus have an ever-increasing complexity in
those definitions.
For ease of bisection, the old macros are converted to the new, nested
variants in a step-by-step manner so that in case an issue is
encountered during testing, one can pinpoint the place where it fails
easier.
Because debugging alternatives is a serious pain"
* tag 'x86_alternatives_for_v6.11_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/alternatives, kvm: Fix a couple of CALLs without a frame pointer
x86/alternative: Replace the old macros
x86/alternative: Convert the asm ALTERNATIVE_3() macro
x86/alternative: Convert the asm ALTERNATIVE_2() macro
x86/alternative: Convert the asm ALTERNATIVE() macro
x86/alternative: Convert ALTERNATIVE_3()
x86/alternative: Convert ALTERNATIVE_TERNARY()
x86/alternative: Convert alternative_call_2()
x86/alternative: Convert alternative_call()
x86/alternative: Convert alternative_io()
x86/alternative: Convert alternative_input()
x86/alternative: Convert alternative_2()
x86/alternative: Convert alternative()
x86/alternatives: Add nested alternatives macros
x86/alternative: Zap alternative_ternary()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RAS updates from Borislav Petkov:
- A cleanup and a correction to the error injection driver to inject a
MCA_MISC value only when one has actually been supplied by the user
* tag 'ras_core_for_v6.11_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mce: Remove unused variable and return value in machine_check_poll()
x86/mce/inject: Only write MCA_MISC when a value has been supplied
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC updates from Borislav Petkov:
- The AMD memory controllers data fabric version 4.5 supports
non-power-of-2 denormalization in the sense that certain bits of the
system physical address cannot be reconstructed from the normalized
address reported by the RAS hardware. Add support for handling such
addresses
- Switch the EDAC drivers to the new Intel CPU model defines
- The usual fixes and cleanups all over the place
* tag 'edac_updates_for_v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC: Add missing MODULE_DESCRIPTION() macros
EDAC/dmc520: Use devm_platform_ioremap_resource()
EDAC/igen6: Add Intel Arrow Lake-U/H SoCs support
RAS/AMD/FMPM: Use atl internal.h for INVALID_SPA
RAS/AMD/ATL: Implement DF 4.5 NP2 denormalization
RAS/AMD/ATL: Validate address map when information is gathered
RAS/AMD/ATL: Expand helpers for adding and removing base and hole
RAS/AMD/ATL: Read DRAM hole base early
RAS/AMD/ATL: Add amd_atl pr_fmt() prefix
RAS/AMD/ATL: Add a missing module description
EDAC, i10nm: make skx_common.o a separate module
EDAC/skx: Switch to new Intel CPU model defines
EDAC/sb_edac: Switch to new Intel CPU model defines
EDAC, pnd2: Switch to new Intel CPU model defines
EDAC/i10nm: Switch to new Intel CPU model defines
EDAC/ghes: Add missing newline to pr_info() statement
RAS/AMD/ATL: Add missing newline to pr_info() statement
EDAC/thunderx: Remove unused struct error_syndrome
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"There's some quite exciting core work in this release, we've got the
beginnings of support for hardware initiated transfers which is itself
independently useful for optimising fast paths in existing drivers.
We also have a rework of the DMA mapping which allows finer grained
decisions about DMA mapping messages and also helps remove some bodges
that we'd had.
Otherwise it's a fairly quiet release, a few new drivers and features
for existing drivers, together with various cleanups and DT binding
conversions.
One regmap SPI fix made it's way in here too which I should probably
have sent as a regmap fix instead.
Summary:
- Support for pre-optimising messages, reducing the overhead for
messages that are repeatedly used (eg, reading the interrupt status
from a device). This will also be used for hardware initiated
transfers in future.
- A reworking of how DMA mapping is done, introducing a new helper
and allowing the DMA mapping decision to be done per transfer
instead of per message.
- Support for Atmel SAMA7D64, Freescale LX2160A DSPI and WCH CH341A"
* tag 'spi-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (72 commits)
spi: dt-bindings: at91: Add sama7d65 compatible string
spi: add ch341a usb2spi driver
spi: dt-bindings: fsl-dspi: add compatible string 'fsl,lx2160a-dspi'
spi: dt-bindings: fsl-dspi: add dmas and dma-names properties
spi: spi: Remove unnecessary ‘0’ values from status
spi: spi: Remove unnecessary ‘0’ values from rc
spi: xcomm: fix coding style
spi: xcomm: remove i2c_set_clientdata()
spi: xcomm: make use of devm_spi_alloc_host()
spi: xcomm: add gpiochip support
spi: dt-bindings: snps,dw-apb-ssi.yaml: update compatible property
spi: dt-bindings: fsl-dspi: Convert to yaml format
spi: fsl-dspi: use common proptery 'spi-cs-setup(hold)-delay-ns'
spi: axi-spi-engine: remove platform_set_drvdata()
spi: spi-fsl-lpspi: Pass pm_ptr()
spi: spi-imx: Pass pm_ptr()
spi: spi-fsl-lpspi: Switch to SYSTEM_SLEEP_PM_OPS()
spi: spi-imx: Switch to RUNTIME_PM_OPS/SYSTEM_SLEEP_PM_OPS()
spi: add EXPORT_SYMBOL_GPL(devm_spi_optimize_message)
spi: add devm_spi_optimize_message() helper
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"This s a very quiet release for the regulator API, we have a few new
devices (most of which are just ID updates) and one new fairly
specialist core feature for use in interrupt context.
- An API allowing lockless enable/disable for regulators acquired in
exclusive mode, for use in interrupt contexts
- A rewrite of the MedaTek DVFSRC regulator driver which apparently
never worked
- Support for Mediaktek MT6312, Qualcomm QCA6390 and WCN7850, Renesas
RZ/G2L USB VBUS regulator and ST Microelectronics STM32MP13"
* tag 'regulator-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (26 commits)
regulator: dt-bindings: pca9450: Make interrupt optional
regulator: pca9450: Make IRQ optional
dt-bindings: regulator: sprd,sc2731-regulator: convert to YAML
regulator: max77857: Constify struct regmap_config
regulator: da9121: Constify struct regmap_config
dt-bindings: regulator: ti,tps65132: document VIN supply
dt-bindings: mfd: twl: Fix example
regulator: Add Renesas RZ/G2L USB VBUS regulator driver
regulator: core: Add helper for allow HW access to enable/disable regulator
regulator: Add bindings for MediaTek DVFSRC Regulators
regulator: Add refactored mtk-dvfsrc-regulator driver
regulator: Remove mtk-dvfsrc-regulator.c
regulator: userspace-consumer: quiet device deferral
regulator: dt-bindings: mt6315: Document MT6319 PMIC
regulator: add missing MODULE_DESCRIPTION() macro
dt-bindings: regulator: twl-regulator: convert to yaml
regulator: dt-bindings: describe the PMU module of the WCN7850 package
regulator: dt-bindings: describe the PMU module of the QCA6390 package
regulator: dt-bindings: rtq2208: Add specified fixed LDO VOUT property
regulator: rtq2208: Add fixed LDO VOUT property and check that matches the constraints
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap updates from Mark Brown:
"There's one new feature here, a regmap_multi_reg_read() matching the
existing write function which has some IIO users coming.
This allows atomic reads from multiple registers without the need to
wrap a higher level lock in the client driver just for regmap (which
already has locks anyway).
We also have one fix for the KUnit tests, and a bunch of cleanups"
* tag 'regmap-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: kunit: Add test cases for regmap_multi_reg_(read,write}()
regmap: Implement regmap_multi_reg_read()
regmap-irq: handle const struct regmap_irq_sub_irq_map
const_structs.checkpatch: add regmap structs
regmap: add missing MODULE_DESCRIPTION() macros
regmap-i2c: add missing MODULE_DESCRIPTION() macro
regmap: kunit: Use array_size() and sizeof(*ptr) consistently
regmap: maple: Switch to use kmemdup_array()
regmap: cache: Switch to use kmemdup_array()
regmap: cache: Use correct type of the rb_for_each() parameter
regmap: Switch to use kmemdup_array()
regmap: kunit: add missing MODULE_DESCRIPTION()
regmap: kunit: Fix memory leaks in gen_regmap() and gen_raw_regmap()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"The majority of added lines are two new modules: the GPIO virtual
consumer module that improves our ability to add automated tests for
the kernel API and the "sloppy" logic analyzer module that uses the
GPIO API to implement a coarse-grained debugging tool for useful for
remote development.
Other than that we have the usual assortment of various driver
extensions, improvements to the core GPIO code, DT-bindings and other
documentation updates as well as an extension to the interrupt
simulator:
GPIOLIB core:
- rework kfifo handling rework in the character device code
- improve the labeling of GPIOs requested as interrupts and show more
info on interrupt-only GPIOs in debugfs
- remove unused APIs
- unexport interfaces that are only used from the core GPIO code
- drop the return value from gpiochip_set_desc_names() as it cannot
fail
- move a string array definition out of a header and into a specific
compilation unit
- convert the last user of gpiochip_get_desc() other than GPIO core
to using a safer alternative
- use array_index_nospec() where applicable
New drivers:
- add a "virtual GPIO consumer" module that allows requesting GPIOs
from actual hardware and driving tests of the in-kernel GPIO API
from user-space over debugfs
- add a GPIO-based "sloppy" logic analyzer module useful for "first
glance" debugging on remote boards
Driver improvements:
- add support for a new model to gpio-pca953x
- lock GPIOs as interrupts in gpio-sim when the lines are requested
as irqs via the simulator domain + some other minor improvements
- improve error reporting in gpio-syscon
- convert gpio-ath79 to using dynamic GPIO base and range
- use pcibios_err_to_errno() for converting PCIBIOS error codes to
errno vaues in gpio-amd8111 and gpio-rdc321x
- allow building gpio-brcmstb for the BCM2835 architecture
DT bindings:
- convert DT bindings for lsi,zevio, mpc8xxx, and atmel to DT schema
- document new properties for aspeed,gpio, fsl,qoriq-gpio and
gpio-vf610
- document new compatibles for pca953x and fsl,qoriq-gpio
Documentation:
- document stricter behavior of the GPIO character device uAPI with
regards to reconfiguring requested line without direction set
- clarify the effect of the active-low flag on line values and edges
- remove documentation for the legacy GPIO API in order to stop
tempting people to use it
- document the preference for using pread() for reading edge events
in the sysfs API
Other:
- add an extended initializer to the interrupt simulator allowing to
specify a number of callbacks callers can use to be notified about
irqs being requested and released"
* tag 'gpio-updates-for-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (41 commits)
gpio: mc33880: Convert comma to semicolon
gpio: virtuser: actually use the "trimmed" local variable
dt-bindings: gpio: convert Atmel GPIO to json-schema
gpio: virtuser: new virtual testing driver for the GPIO API
dt-bindings: gpio: vf610: Allow gpio-line-names to be set
gpio: sim: lock GPIOs as interrupts when they are requested
genirq/irq_sim: add an extended irq_sim initializer
dt-bindings: gpio: fsl,qoriq-gpio: Add compatible string fsl,ls1046a-gpio
gpiolib: unexport gpiochip_get_desc()
gpio: add sloppy logic analyzer using polling
Documentation: gpio: Reconfiguration with unset direction (uAPI v2)
Documentation: gpio: Reconfiguration with unset direction (uAPI v1)
dt-bindings: gpio: fsl,qoriq-gpio: add common property gpio-line-names
gpio: ath79: convert to dynamic GPIO base allocation
pinctrl: da9062: replace gpiochip_get_desc() with gpio_device_get_desc()
gpiolib: put gpio_suffixes in a single compilation unit
Documentation: gpio: Clarify effect of active low flag on line edges
Documentation: gpio: Clarify effect of active low flag on line values
gpiolib: Remove data-less gpiochip_add() function
gpio: sim: use devm_mutex_init()
...
|
