| Age | Commit message (Collapse) | Author |
|---|
|
Currently __bio_integrity_endio frees the integrity payload unless it is
explicitly marked as user-mapped. This means in-kernel callers that
allocate their own integrity payload never get to see it on I/O
completion. The current two users don't need it as they just pre-mapped
PI tuples received over the network, but this limits uses of integrity
data lot.
Change bio_integrity_endio to call __bio_integrity_endio for block layer
generated integrity data only, and leave freeing of submitter
allocated integrity data to bio_uninit which also gets called from
the final bio_put. This requires that unmapping user mapped or copied
integrity data is now always done by the caller, and the special
BIP_INTEGRITY_USER flag can go away.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240702151047.1746127-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
blk_rq_unmap_user always unmaps user space pass-through request. If such
a request has integrity data attached it must come from a user mapping
as well. Call bio_integrity_unmap_free_user from blk_rq_unmap_user
and remove the nvme_unmap_bio wrapper in the nvme driver.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Anuj Gupta <anuj20.g@samsung.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240702151047.1746127-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Commit b222dd2fdd53 ("block: call bio_uninit in bio_endio") added a call
to bio_uninit in bio_endio to work around callers that use bio_init but
fail to call bio_uninit after they are done to release the resources.
While this is an abuse of the bio_init API we still have quite a few of
those left. But this early uninit causes a problem for integrity data,
as at least some users need the bio_integrity_payload. Right now the
only one is the NVMe passthrough which archives this by adding a special
case to skip the freeing if the BIP_INTEGRITY_USER flag is set.
Sort this out by only putting bi_blkg in bio_endio as that is the cause
of the actual leaks - the few users of the crypto context and integrity
data all properly call bio_uninit, usually through bio_put for
dynamically allocated bios.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240702151047.1746127-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
struct bio_integrity_payload is defined unconditionally. No need to
return void * from bio_integrity() and bio_integrity_alloc().
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Anuj Gupta <anuj20.g@samsung.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240702151047.1746127-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Split struct bio_integrity_payload and the related prototypes out of
bio.h into a separate bio-integrity.h header so that it is only pulled
in by the few places that need it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Anuj Gupta <anuj20.g@samsung.com>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240702151047.1746127-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull in v6.10-rc6 to resolve a conflict for the integrity cleanups.
* tag 'v6.10-rc6': (778 commits)
Linux 6.10-rc6
ata: ahci: Clean up sysfs file on error
ata: libata-core: Fix double free on error
ata,scsi: libata-core: Do not leak memory for ata_port struct members
ata: libata-core: Fix null pointer dereference on error
x86-32: fix cmpxchg8b_emu build error with clang
x86: stop playing stack games in profile_pc()
i2c: testunit: discard write requests while old command is running
i2c: testunit: don't erase registers after STOP
tty: mxser: Remove __counted_by from mxser_board.ports[]
randomize_kstack: Remove non-functional per-arch entropy filtering
string: kunit: add missing MODULE_DESCRIPTION() macros
ata: libata-core: Add ATA_HORKAGE_NOLPM for all Crucial BX SSD1 models
MAINTAINERS: Update IOMMU tree location
tools/power turbostat: Add local build_bug.h header for snapshot target
tools/power turbostat: Fix unc freq columns not showing with '-q' or '-l'
tools/power turbostat: option '-n' is ambiguous
drm/drm_file: Fix pid refcounting race
kallsyms: rework symbol lookup return codes
gpiolib: cdev: Ignore reconfiguration without direction
...
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Ensure that info->sector_size and info->physical_sector_size are set
before the call to blkif_set_queue_limits by doing away with the
local variables and arguments that propagate them.
Thanks to Marek Marczykowski-Górecki and Jürgen Groß for root causing
the issue.
Fixes: ba3f67c11638 ("xen-blkfront: atomically update queue limits")
Reported-by: Rusty Bird <rustybird@net-c.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Link: https://lore.kernel.org/r/20240625055238.7934-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The description of the fua module parameter is defined using
MODULE_PARM_DESC() with the first argument passed being "zoned". That is
the wrong name, obviously. Fix that by using the correct "fua" parameter
name so that "modinfo null_blk" displays correct information.
Fixes: f4f84586c8b9 ("null_blk: Introduce fua attribute")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20240702073234.206458-1-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The current tag reservation code is based on a misunderstanding of the
meaning of data->shallow_depth. Fix the tag reservation code as follows:
* By default, do not reserve any tags for synchronous requests because
for certain use cases reserving tags reduces performance. See also
Harshit Mogalapalli, [bug-report] Performance regression with fio
sequential-write on a multipath setup, 2024-03-07
(https://lore.kernel.org/linux-block/5ce2ae5d-61e2-4ede-ad55-551112602401@oracle.com/)
* Reduce min_shallow_depth to one because min_shallow_depth must be less
than or equal any shallow_depth value.
* Scale dd->async_depth from the range [1, nr_requests] to [1,
bits_per_sbitmap_word].
Cc: Christoph Hellwig <hch@lst.de>
Cc: Damien Le Moal <dlemoal@kernel.org>
Cc: Zhiguo Niu <zhiguo.niu@unisoc.com>
Fixes: 07757588e507 ("block/mq-deadline: Reserve 25% of scheduler tags for synchronous requests")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240509170149.7639-3-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Call .limit_depth() after data->hctx has been set such that data->hctx can
be used in .limit_depth() implementations.
Cc: Christoph Hellwig <hch@lst.de>
Cc: Damien Le Moal <dlemoal@kernel.org>
Cc: Zhiguo Niu <zhiguo.niu@unisoc.com>
Fixes: 07757588e507 ("block/mq-deadline: Reserve 25% of scheduler tags for synchronous requests")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Zhiguo Niu <zhiguo.niu@unisoc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240509170149.7639-2-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
NOWS is one of the annoying "0's based values" in NVMe, where 0 means one
and we thus can't detect if it isn't set. Thus a NOWS value of 0 means
that the Namespace Optimal Write Size is a single LBA, which is clearly
bogus. Ignore the value in that case and don't propagate an io_opt
value to the block layer.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Nitesh Shetty <nj.shetty@samsung.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20240701051800.1245240-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Don't reduce the max_sectors value below the normal cap when the driver
advertsizes a very low io_opt. This restores the behavior we had before
the recent changes to the max_sectors calculation.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Nitesh Shetty <nj.shetty@samsung.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20240701051800.1245240-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If io_min is larger than the cap, it must by definition be non-zero.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Nitesh Shetty <nj.shetty@samsung.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20240701051800.1245240-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Now we avoid throttling swap writes by determining whether the current
process is kswapd (aka current_is_kswapd()), but swap writes can come
from either kswapd or direct reclaim, so the swap writes from direct
reclaim will still be throttled.
When a process holds a lock to allocate a free page, and enters direct
reclaim because there is no free memory, then it might trigger a hung
due to the wbt throttling that causes other processes to fail to get
the lock.
Both kswapd and direct reclaim set the REQ_SWAP flag, so use REQ_SWAP
instead of current_is_kswapd() to avoid throttling swap writes. Also
renamed WBT_KSWAPD to WBT_SWAP and WBT_RWQ_KSWAPD to WBT_RWQ_SWAP.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240604030522.3686177-1-libaokun@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata fixes from Niklas Cassel:
- Add NOLPM quirk for for all Crucial BX SSD1 models.
Considering that we now have had bug reports for 3 different BX SSD1
variants from Crucial with the same product name, make the quirk more
inclusive, to catch more device models from the same generation.
- Fix a trivial NULL pointer dereference in the error path for
ata_host_release().
- Create a ata_port_free(), so that we don't miss freeing ata_port
struct members when freeing a struct ata_port.
- Fix a trivial double free in the error path for ata_host_alloc().
- Ensure that we remove the libata "remapped NVMe device count" sysfs
entry on .probe() error.
* tag 'ata-6.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: ahci: Clean up sysfs file on error
ata: libata-core: Fix double free on error
ata,scsi: libata-core: Do not leak memory for ata_port struct members
ata: libata-core: Fix null pointer dereference on error
ata: libata-core: Add ATA_HORKAGE_NOLPM for all Crucial BX SSD1 models
|
|
.probe() (ahci_init_one()) calls sysfs_add_file_to_group(), however,
if probe() fails after this call, we currently never call
sysfs_remove_file_from_group().
(The sysfs_remove_file_from_group() call in .remove() (ahci_remove_one())
does not help, as .remove() is not called on .probe() error.)
Thus, if probe() fails after the sysfs_add_file_to_group() call, the next
time we insmod the module we will get:
sysfs: cannot create duplicate filename '/devices/pci0000:00/0000:00:04.0/remapped_nvme'
CPU: 11 PID: 954 Comm: modprobe Not tainted 6.10.0-rc5 #43
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x5d/0x80
sysfs_warn_dup.cold+0x17/0x23
sysfs_add_file_mode_ns+0x11a/0x130
sysfs_add_file_to_group+0x7e/0xc0
ahci_init_one+0x31f/0xd40 [ahci]
Fixes: 894fba7f434a ("ata: ahci: Add sysfs attribute to show remapped NVMe device count")
Cc: stable@vger.kernel.org
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20240629124210.181537-10-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
|
|
If e.g. the ata_port_alloc() call in ata_host_alloc() fails, we will jump
to the err_out label, which will call devres_release_group().
devres_release_group() will trigger a call to ata_host_release().
ata_host_release() calls kfree(host), so executing the kfree(host) in
ata_host_alloc() will lead to a double free:
kernel BUG at mm/slub.c:553!
Oops: invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
CPU: 11 PID: 599 Comm: (udev-worker) Not tainted 6.10.0-rc5 #47
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 04/01/2014
RIP: 0010:kfree+0x2cf/0x2f0
Code: 5d 41 5e 41 5f 5d e9 80 d6 ff ff 4d 89 f1 41 b8 01 00 00 00 48 89 d9 48 89 da
RSP: 0018:ffffc90000f377f0 EFLAGS: 00010246
RAX: ffff888112b1f2c0 RBX: ffff888112b1f2c0 RCX: ffff888112b1f320
RDX: 000000000000400b RSI: ffffffffc02c9de5 RDI: ffff888112b1f2c0
RBP: ffffc90000f37830 R08: 0000000000000000 R09: 0000000000000000
R10: ffffc90000f37610 R11: 617461203a736b6e R12: ffffea00044ac780
R13: ffff888100046400 R14: ffffffffc02c9de5 R15: 0000000000000006
FS: 00007f2f1cabe980(0000) GS:ffff88813b380000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f2f1c3acf75 CR3: 0000000111724000 CR4: 0000000000750ef0
PKRU: 55555554
Call Trace:
<TASK>
? __die_body.cold+0x19/0x27
? die+0x2e/0x50
? do_trap+0xca/0x110
? do_error_trap+0x6a/0x90
? kfree+0x2cf/0x2f0
? exc_invalid_op+0x50/0x70
? kfree+0x2cf/0x2f0
? asm_exc_invalid_op+0x1a/0x20
? ata_host_alloc+0xf5/0x120 [libata]
? ata_host_alloc+0xf5/0x120 [libata]
? kfree+0x2cf/0x2f0
ata_host_alloc+0xf5/0x120 [libata]
ata_host_alloc_pinfo+0x14/0xa0 [libata]
ahci_init_one+0x6c9/0xd20 [ahci]
Ensure that we will not call kfree(host) twice, by performing the kfree()
only if the devres_open_group() call failed.
Fixes: dafd6c496381 ("libata: ensure host is free'd on error exit paths")
Cc: stable@vger.kernel.org
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20240629124210.181537-9-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
|
|
libsas is currently not freeing all the struct ata_port struct members,
e.g. ncq_sense_buf for a driver supporting Command Duration Limits (CDL).
Add a function, ata_port_free(), that is used to free a ata_port,
including its struct members. It makes sense to keep the code related to
freeing a ata_port in its own function, which will also free all the
struct members of struct ata_port.
Fixes: 18bd7718b5c4 ("scsi: ata: libata: Handle completion of CDL commands using policy 0xD")
Reviewed-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20240629124210.181537-8-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
|
|
If the ata_port_alloc() call in ata_host_alloc() fails,
ata_host_release() will get called.
However, the code in ata_host_release() tries to free ata_port struct
members unconditionally, which can lead to the following:
BUG: unable to handle page fault for address: 0000000000003990
PGD 0 P4D 0
Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI
CPU: 10 PID: 594 Comm: (udev-worker) Not tainted 6.10.0-rc5 #44
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 04/01/2014
RIP: 0010:ata_host_release.cold+0x2f/0x6e [libata]
Code: e4 4d 63 f4 44 89 e2 48 c7 c6 90 ad 32 c0 48 c7 c7 d0 70 33 c0 49 83 c6 0e 41
RSP: 0018:ffffc90000ebb968 EFLAGS: 00010246
RAX: 0000000000000041 RBX: ffff88810fb52e78 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffff88813b3218c0 RDI: ffff88813b3218c0
RBP: ffff88810fb52e40 R08: 0000000000000000 R09: 6c65725f74736f68
R10: ffffc90000ebb738 R11: 73692033203a746e R12: 0000000000000004
R13: 0000000000000000 R14: 0000000000000011 R15: 0000000000000006
FS: 00007f6cc55b9980(0000) GS:ffff88813b300000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000003990 CR3: 00000001122a2000 CR4: 0000000000750ef0
PKRU: 55555554
Call Trace:
<TASK>
? __die_body.cold+0x19/0x27
? page_fault_oops+0x15a/0x2f0
? exc_page_fault+0x7e/0x180
? asm_exc_page_fault+0x26/0x30
? ata_host_release.cold+0x2f/0x6e [libata]
? ata_host_release.cold+0x2f/0x6e [libata]
release_nodes+0x35/0xb0
devres_release_group+0x113/0x140
ata_host_alloc+0xed/0x120 [libata]
ata_host_alloc_pinfo+0x14/0xa0 [libata]
ahci_init_one+0x6c9/0xd20 [ahci]
Do not access ata_port struct members unconditionally.
Fixes: 633273a3ed1c ("libata-pmp: hook PMP support and enable it")
Cc: stable@vger.kernel.org
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20240629124210.181537-7-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Remove the executable bit from installed DTB files
- Escape $ in subshell execution in the debian-orig target
- Fix RPM builds with CONFIG_MODULES=n
- Fix xconfig with the O= option
- Fix scripts_gdb with the O= option
* tag 'kbuild-fixes-v6.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: scripts/gdb: bring the "abspath" back
kbuild: Use $(obj)/%.cc to fix host C++ module builds
kbuild: rpm-pkg: fix build error with CONFIG_MODULES=n
kbuild: Fix build target deb-pkg: ln: failed to create hard link
kbuild: doc: Update default INSTALL_MOD_DIR from extra to updates
kbuild: Install dtb files as 0644 in Makefile.dtbinst
|
|
The kernel test robot reported that clang no longer compiles the 32-bit
x86 kernel in some configurations due to commit 95ece48165c1
("locking/atomic/x86: Rewrite x86_32 arch_atomic64_{,fetch}_{and,or,xor}()
functions").
The build fails with
arch/x86/include/asm/cmpxchg_32.h:149:9: error: inline assembly requires more registers than available
and the reason seems to be that not only does the cmpxchg8b instruction
need four fixed registers (EDX:EAX and ECX:EBX), with the emulation
fallback the inline asm also wants a fifth fixed register for the
address (it uses %esi for that, but that's just a software convention
with cmpxchg8b_emu).
Avoiding using another pointer input to the asm (and just forcing it to
use the "0(%esi)" addressing that we end up requiring for the sw
fallback) seems to fix the issue.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202406230912.F6XFIyA6-lkp@intel.com/
Fixes: 95ece48165c1 ("locking/atomic/x86: Rewrite x86_32 arch_atomic64_{,fetch}_{and,or,xor}() functions")
Link: https://lore.kernel.org/all/202406230912.F6XFIyA6-lkp@intel.com/
Suggested-by: Uros Bizjak <ubizjak@gmail.com>
Reviewed-and-Tested-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some small driver fixes for 6.10-rc6. Included in here are:
- IIO driver fixes for reported issues
- Counter driver fix for a reported problem.
All of these have been in linux-next this week with no reported
issues"
* tag 'char-misc-6.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
counter: ti-eqep: enable clock at probe
iio: chemical: bme680: Fix sensor data read operation
iio: chemical: bme680: Fix overflows in compensate() functions
iio: chemical: bme680: Fix calibration data variable
iio: chemical: bme680: Fix pressure value output
iio: humidity: hdc3020: fix hysteresis representation
iio: dac: fix ad9739a random config compile error
iio: accel: fxls8962af: select IIO_BUFFER & IIO_KFIFO_BUF
iio: adc: ad7266: Fix variable checking bug
iio: xilinx-ams: Don't include ams_ctrl_channels in scan_mask
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are two small staging driver fixes for 6.10-rc6, both for the
vc04_services drivers:
- build fix if CONFIG_DEBUGFS was not set
- initialization check fix that was much reported.
Both of these have been in linux-next this week with no reported
issues"
* tag 'staging-6.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: vchiq_debugfs: Fix build if CONFIG_DEBUG_FS is not set
staging: vc04_services: vchiq_arm: Fix initialisation check
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial / console fixes from Greg KH:
"Here are a bunch of fixes/reverts for 6.10-rc6. Include in here are:
- revert the bunch of tty/serial/console changes that landed in -rc1
that didn't quite work properly yet.
Everyone agreed to just revert them for now and will work on making
them better for a future release instead of trying to quick fix the
existing changes this late in the release cycle
- 8250 driver port count bugfix
- Other tiny serial port bugfixes for reported issues
All of these have been in linux-next this week with no reported
issues"
* tag 'tty-6.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
Revert "printk: Save console options for add_preferred_console_match()"
Revert "printk: Don't try to parse DEVNAME:0.0 console options"
Revert "printk: Flag register_console() if console is set on command line"
Revert "serial: core: Add support for DEVNAME:0.0 style naming for kernel console"
Revert "serial: core: Handle serial console options"
Revert "serial: 8250: Add preferred console in serial8250_isa_init_ports()"
Revert "Documentation: kernel-parameters: Add DEVNAME:0.0 format for serial ports"
Revert "serial: 8250: Fix add preferred console for serial8250_isa_init_ports()"
Revert "serial: core: Fix ifdef for serial base console functions"
serial: bcm63xx-uart: fix tx after conversion to uart_port_tx_limited()
serial: core: introduce uart_port_tx_limited_flags()
Revert "serial: core: only stop transmit when HW fifo is empty"
serial: imx: set receiver level before starting uart
tty: mcf: MCF54418 has 10 UARTS
serial: 8250_omap: Implementation of Errata i2310
tty: serial: 8250: Fix port count mismatch with the device
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are a handful of small USB driver fixes for 6.10-rc6 to resolve
some reported issues. Included in here are:
- typec driver bugfixes
- usb gadget driver reverts for commits that were reported to have
problems
- resource leak bugfix
- gadget driver bugfixes
- dwc3 driver bugfixes
- usb atm driver bugfix for when syzbot got loose on it
All of these have been in linux-next this week with no reported issues"
* tag 'usb-6.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: dwc3: core: Workaround for CSR read timeout
Revert "usb: gadget: u_ether: Replace netif_stop_queue with netif_device_detach"
Revert "usb: gadget: u_ether: Re-attach netif device to mirror detachment"
usb: gadget: aspeed_udc: fix device address configuration
usb: dwc3: core: remove lock of otg mode during gadget suspend/resume to avoid deadlock
usb: typec: ucsi: glink: fix child node release in probe function
usb: musb: da8xx: fix a resource leak in probe()
usb: typec: ucsi_acpi: Add LG Gram quirk
usb: ucsi: stm32: fix command completion handling
usb: atm: cxacru: fix endpoint checking in cxacru_bind()
usb: gadget: printer: fix races against disable
usb: gadget: printer: SS+ support
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull smp fixes from Borislav Petkov:
- Fix "nosmp" and "maxcpus=0" after the parallel CPU bringup work went
in and broke them
- Make sure CPU hotplug dynamic prepare states are actually executed
* tag 'smp_urgent_for_v6.10_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
cpu: Fix broken cmdline "nosmp" and "maxcpus=0"
cpu/hotplug: Fix dynstate assignment in __cpuhp_setup_state_cpuslocked()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Borislav Petkov:
- Make sure multi-bridge machines get all eiointc interrupt controllers
initialized even if the number of CPUs has been limited by a cmdline
param
- Make sure interrupt lines on liointc hw are configured properly even
when interrupt routing changes
- Avoid use-after-free in the error path of the MSI init code
* tag 'irq_urgent_for_v6.10_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
PCI/MSI: Fix UAF in msi_capability_init
irqchip/loongson-liointc: Set different ISRs for different cores
irqchip/loongson-eiointc: Use early_cpu_to_node() instead of cpu_to_node()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fix from Borislav Petkov:
- Warn when an hrtimer doesn't get a callback supplied
* tag 'timers_urgent_for_v6.10_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
hrtimer: Prevent queuing of hrtimer without a function callback
|
|
git://www.linux-watchdog.org/linux-watchdog
Pull watchdog fixes from Wim Van Sebroeck:
- lenovo_se10_wdt: add HAS_IOPORT dependency
- add missing MODULE_DESCRIPTION() macros
* tag 'linux-watchdog-6.10-rc-fixes' of git://www.linux-watchdog.org/linux-watchdog:
watchdog: add missing MODULE_DESCRIPTION() macros
watchdog: lenovo_se10_wdt: add HAS_IOPORT dependency
|
|
Pull NFS client fix from Trond Myklebust:
- One more SUNRPC fix for the NFSv4.x backchannel timeouts
* tag 'nfs-for-6.10-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
SUNRPC: Fix backchannel reply, again
|
|
Pull xfs fixes from Chandan Babu:
- Always free only post-EOF delayed allocations for files with the
XFS_DIFLAG_PREALLOC or APPEND flags set.
- Do not align cow fork delalloc to cowextsz hint when running low on
space.
- Allow zero-size symlinks and directories as long as the link count is
zero.
- Change XFS_IOC_EXCHANGE_RANGE to be a _IOW only ioctl. This was ioctl
was introduced during v6.10 developement cycle.
- xfs_init_new_inode() now creates an attribute fork on a newly created
inode even if ATTR feature flag is not enabled.
* tag 'xfs-6.10-fixes-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: honor init_xattrs in xfs_init_new_inode for !ATTR fs
xfs: fix direction in XFS_IOC_EXCHANGE_RANGE
xfs: allow unlinked symlinks and dirs with zero size
xfs: restrict when we try to align cow fork delalloc to cowextsz hints
xfs: fix freeing speculative preallocations for preallocated files
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"Two fixes for the testunit and and a fixup for the code reorganization
of the previous wmt-driver"
* tag 'i2c-for-6.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: testunit: discard write requests while old command is running
i2c: testunit: don't erase registers after STOP
i2c: viai2c: turn common code into a proper module
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
- Fix lg-laptop driver not working with 2024 LG laptop models
- Add missing MODULE_DESCRIPTION() macros to various modules
- nvsw-sn2201: Add check for platform_device_add_resources
* tag 'platform-drivers-x86-v6.10-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: add missing MODULE_DESCRIPTION() macros
platform/x86/intel: add missing MODULE_DESCRIPTION() macros
platform/x86/siemens: add missing MODULE_DESCRIPTION() macros
platform/x86: lg-laptop: Use ACPI device handle when evaluating WMAB/WMBB
platform/x86: lg-laptop: Change ACPI device id
platform/x86: lg-laptop: Remove LGEX0815 hotkey handling
platform/x86: wireless-hotkey: Add support for LG Airplane Button
platform/mellanox: nvsw-sn2201: Add check for platform_device_add_resources
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
- moxart-mmc: Revert "mmc: moxart-mmc: Use sg_miter for PIO"
- sdhci: Do not invert write-protect twice
- sdhci: Do not lock spinlock around mmc_gpio_get_ro()
- sdhci-pci/sdhci-pci-o2micro: Return proper error codes
- sdhci-brcmstb: Fix support for erase/trim/discard
* tag 'mmc-v6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: sdhci: Do not lock spinlock around mmc_gpio_get_ro()
mmc: sdhci: Do not invert write-protect twice
Revert "mmc: moxart-mmc: Use sg_miter for PIO"
mmc: sdhci-brcmstb: check R1_STATUS for erase/trim/discard
mmc: sdhci-pci-o2micro: Convert PCIBIOS_* return codes to errnos
mmc: sdhci-pci: Convert PCIBIOS_* return codes to errnos
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- A fix for vector load/store instruction decoding, which could result
in reserved vector element length encodings decoding as valid vector
instructions.
- Instruction patching now aggressively flushes the local instruction
cache, to avoid situations where patching functions on the flush path
results in torn instructions being fetched.
- A fix to prevent the stack walker from showing up as part of traces.
* tag 'riscv-for-linus-6.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: stacktrace: convert arch_stack_walk() to noinstr
riscv: patch: Flush the icache right after patching to avoid illegal insns
RISC-V: fix vector insn load/store width mask
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening fixes from Kees Cook:
- Remove invalid tty __counted_by annotation (Nathan Chancellor)
- Add missing MODULE_DESCRIPTION()s for KUnit string tests (Jeff
Johnson)
- Remove non-functional per-arch kstack entropy filtering
* tag 'hardening-v6.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
tty: mxser: Remove __counted_by from mxser_board.ports[]
randomize_kstack: Remove non-functional per-arch entropy filtering
string: kunit: add missing MODULE_DESCRIPTION() macros
|
|
The 'profile_pc()' function is used for timer-based profiling, which
isn't really all that relevant any more to begin with, but it also ends
up making assumptions based on the stack layout that aren't necessarily
valid.
Basically, the code tries to account the time spent in spinlocks to the
caller rather than the spinlock, and while I support that as a concept,
it's not worth the code complexity or the KASAN warnings when no serious
profiling is done using timers anyway these days.
And the code really does depend on stack layout that is only true in the
simplest of cases. We've lost the comment at some point (I think when
the 32-bit and 64-bit code was unified), but it used to say:
Assume the lock function has either no stack frame or a copy
of eflags from PUSHF.
which explains why it just blindly loads a word or two straight off the
stack pointer and then takes a minimal look at the values to just check
if they might be eflags or the return pc:
Eflags always has bits 22 and up cleared unlike kernel addresses
but that basic stack layout assumption assumes that there isn't any lock
debugging etc going on that would complicate the code and cause a stack
frame.
It causes KASAN unhappiness reported for years by syzkaller [1] and
others [2].
With no real practical reason for this any more, just remove the code.
Just for historical interest, here's some background commits relating to
this code from 2006:
0cb91a229364 ("i386: Account spinlocks to the caller during profiling for !FP kernels")
31679f38d886 ("Simplify profile_pc on x86-64")
and a code unification from 2009:
ef4512882dbe ("x86: time_32/64.c unify profile_pc")
but the basics of this thing actually goes back to before the git tree.
Link: https://syzkaller.appspot.com/bug?extid=84fe685c02cd112a2ac3 [1]
Link: https://lore.kernel.org/all/CAK55_s7Xyq=nh97=K=G1sxueOFrJDAvPOJAL4TPTCAYvmxO9_A@mail.gmail.com/ [2]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The kobject for the queue entries is embedded into a struct gendisk.
Pass it to the sysfs methods instead of the request_queue derived from
it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240627111407.476276-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
A lof the code to implement the queue sysfs attributes is repetitive.
Add a few macros to generate the common cases.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20240627111407.476276-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
queue_logical_block_size is never called with a 0 queue, and the
logical_block_size field in queue_limits is always initialized for
a live queue.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20240627111407.476276-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
User will configure allowed iops limit in 1s, and calculate_io_allowed()
will calculate allowed iops in the slice by:
limit * HZ / throtl_slice
However, if limit is quite low, the result can be 0, then
allowed IO in the slice is 0, this will cause missing dispatch and
control will be lower than limit.
For example, set iops_limit to 5 with HD disk, and test will found that
iops will be 3.
This is usually not a big deal, because user will unlikely to configure
such low iops limit, however, this is still a problem in the extreme
scene.
Fix the problem by making sure the wait time calculated by
tg_within_iops_limit() should allow at least one IO to be dispatched.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20240618062108.3680835-1-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Set the bip_vcnt correctly in bio_integrity_init_user and
bio_integrity_copy_user. If the bio gets split at a later point,
this value is required to set the right bip_vcnt in the cloned bio.
Signed-off-by: Anuj Gupta <anuj20.g@samsung.com>
Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240626100700.3629-3-anuj20.g@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Block device features and flags were refactored from `enum` to `#define`.
This broke Rust binding generation. This patch fixes the binding
generation.
Fixes: fcf865e357f8 ("block: convert features and flags to __bitwise types")
Signed-off-by: Andreas Hindborg <a.hindborg@samsung.com>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Link: https://lore.kernel.org/r/20240628091152.2185241-1-nmi@metaspace.dk
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When clearing registers on new write requests was added, the protection
for currently running commands was missed leading to concurrent access
to the testunit registers. Check the flag beforehand.
Fixes: b39ab96aa894 ("i2c: testunit: add support for block process calls")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
|
|
STOP fallsthrough to WRITE_REQUESTED but this became problematic when
clearing the testunit registers was added to the latter. Actually, there
is no reason to clear the testunit state after STOP. Doing it when a new
WRITE_REQUESTED arrives is enough. So, no need to fallthrough, at all.
Fixes: b39ab96aa894 ("i2c: testunit: add support for block process calls")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-current
Fixed a build error following the major refactoring involving the
VIA-I2C modules. Originally, the code was split to group together
parts that would be used by different drivers. This caused build
issues when two modules linked to the same code.
|
|
QUEUE_FLAG_SAME_FORCE has been set by rnbd-cnt since the initial
merge. There is no good reason for a driver to force exact core
delivery, which is tunable for very specific workloads and not a
driver setting.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240627124926.512662-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
QUEUE_FLAG_SAME_COMP is already set by default.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240627124926.512662-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Setting QUEUE_FLAG_NOMERGES was added in commit d1b01d14b7ba ("scsi:
mpt3sas: Set NVMe device queue depth as 128") without any explanation.
Drivers should second guess the block layer merge decisions, so remove
the flag.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240627124926.512662-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
