| Age | Commit message (Collapse) | Author |
|---|
|
[Why]
The functions read_ono_state are no longer in use and have been identified
as redundant.
Removing them helps streamline the codebase and improve maintainability by
eliminating unnecessary code.
[How]
These unused functions were removed from Hwss module, ensuring that no
functionality is affected, and the code is simplified.
Reviewed-by: Martin Leung <martin.leung@amd.com>
Signed-off-by: Karthi Kandasamy <karthi.kandasamy@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
"afs:
- Fix the maximum cell name length
- Fix merge preference rule failure condition
fuse:
- Fix fuse_get_user_pages() so it doesn't risk misleading the caller
to think pages have been allocated when they actually haven't
- Fix direct-io folio offset and length calculation
netfs:
- Fix async direct-io handling
- Fix read-retry for filesystems that don't provide a
->prepare_read() method
vfs:
- Prevent truncating 64-bit offsets to 32-bits in iomap
- Fix memory barrier interactions when polling
- Remove MNT_ONRB to fix concurrent modification of @mnt->mnt_flags
leading to MNT_ONRB to not be raised and invalid access to a list
member"
* tag 'vfs-6.13-rc7.fixes.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
poll: kill poll_does_not_wait()
sock_poll_wait: kill the no longer necessary barrier after poll_wait()
io_uring_poll: kill the no longer necessary barrier after poll_wait()
poll_wait: kill the obsolete wait_address check
poll_wait: add mb() to fix theoretical race between waitqueue_active() and .poll()
afs: Fix merge preference rule failure condition
netfs: Fix read-retry for fs with no ->prepare_read()
netfs: Fix kernel async DIO
fs: kill MNT_ONRB
iomap: avoid avoid truncating 64-bit offset to 32 bits
afs: Fix the maximum cell name length
fuse: Set *nbytesp=0 in fuse_get_user_pages on allocation failure
fuse: fix direct io folio offset and length calculation
|
|
[Why]
There should not be any need to revalidate bandwidth on memory placement
change, since the fb is expected to be pinned to DCN-accessable memory
before scanout. For APU it's DRAM, and DGPU, it's VRAM. However, async
flips + memory type change needs to be rejected.
[How]
Do not set lock_and_validation_needed on mem_type change. Instead,
reject an async_flip request if the crtc's buffer(s) changed mem_type.
This may fix stuttering/corruption experienced with PSR SU and PSR1
panels, if the compositor allocates fbs in both VRAM carveout and GTT
and flips between them.
Fixes: a7c0cad0dc06 ("drm/amd/display: ensure async flips are only accepted for fast updates")
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Merge series from Miquel Raynal <miquel.raynal@bootlin.com>:
Add a spi_mem_calc_op_duration() helper
|
|
[Why]
Outside of a modeset/link configuration change, we should not have to
wait for the panel to exit PSR. Depending on the panel and it's state,
it may take multiple frames for it to exit PSR. Therefore, waiting in
all scenarios may cause perceived stuttering, especially in combination
with faster vblank shutdown.
[How]
PSR1 disable is hooked up to the vblank enable event, and vice versa. In
case of vblank enable, do not wait for panel to exit PSR, but still wait
in all other cases.
We also avoid a call to unnecessarily change power_opts on disable -
this ends up sending another command to dmcub fw.
When testing against IGT, some crc tests like kms_plane_alpha_blend and
amd_hotplug were failing due to CRC timeouts. This was found to be
caused by the early return before HW has fully exited PSR1. Fix this by
first making sure we grab a vblank reference, then waiting for panel to
exit PSR1, before programming hw for CRC generation.
Fixes: 58a261bfc967 ("drm/amd/display: use a more lax vblank enable policy for older ASICs")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3743
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
When first time of link training is fail,
eDP would be powered down and
would not be powered up for next retry link training.
It causes that all of retry link linking would be fail.
[how]
We has extracted both power up and down sequence from
enable/disable link output function before DCN32.
We remov eDP power down in dcn32_disable_link_output().
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Yiling Chen <yi-ling.chen2@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Revert commit 284f141f5ce5 ("drm/amd/display: Enable urgent latency adjustments for DCN35")
[Why & How]
Urgent latency increase caused 2.8K OLED monitor caused it to
block this panel support P0.
Reverting this change does not reintroduce the netflix corruption issue
which it fixed.
Fixes: 284f141f5ce5 ("drm/amd/display: Enable urgent latency adjustments for DCN35")
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Nicholas Susanto <Nicholas.Susanto@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY&HOW]
BIOS table will not always contain accurate UMC channel info when
harvesting is enabled, so get the correct info from SMU.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Pull xfs fixes from Carlos Maiolino:
- Fix a missing lock while detaching a dquot buffer
- Fix failure on xfs_update_last_rtgroup_size for !XFS_RT
* tag 'xfs-fixes-6.13-rc7' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: lock dquot buffer before detaching dquot from b_li_list
xfs: don't return an error from xfs_update_last_rtgroup_size for !XFS_RT
|
|
[WHAT & HOW]
Variables, used as denominators and maybe not assigned to other values,
should be initialized to non-zero to avoid DIVIDE_BY_ZERO, as reported
by Coverity.
Reviewed-by: Austin Zheng <austin.zheng@amd.com>
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
For the legacy secure display, it involves PSP + DMUB to confgiure and
retrieve the CRC/ROI result. Have requirement to support mode which all
handled by driver only.
[How]
Add another "DisplayCRC" mode, which doesn't involve PSP + DMUB.
All things are handled by the driver only
Reviewed-by: HaoPing Liu <haoping.liu@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Have the need to specify the CRC window on specific CRC engine.
dc_stream_configure_crc() today calculates CRC on crc engine 0 only and always
resets CRC engine at first.
[How]
Add index parameter to dc_stream_configure_crc() for selecting the desired crc
engine. Additionally, add another parameter to specify whether to skip the
default reset of crc engine.
Reviewed-by: HaoPing Liu <haoping.liu@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Observed frame rate get dropped by tool like glxgear. Even though the
output to monitor is 60Hz, the rendered frame rate drops to 30Hz lower.
It's due to code path in some cases will trigger
dm_dp_mst_is_port_support_mode() to read out remote Link status to
assess the available bandwidth for dsc maniplation. Overhead of keep
reading remote DPCD is considerable.
[How]
Store the remote link BW in mst_local_bw and use end-to-end full_pbn
as an indicator to decide whether update the remote link bw or not.
Whenever we need the info to assess the BW, visit the stored one first.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3720
Fixes: fa57924c76d9 ("drm/amd/display: Refactor function dm_dp_mst_is_port_support_mode()")
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why & How]
Currently in dm_dp_mst_is_port_support_mode(), when valdidating mode
under dsc decoding at the last DP link config, we only validate the
case when there is an UFP. However, if the MSTB LCT=1, there is no
UFP.
Under this case, use root_link_bw_in_kbps as the available bw to
compare.
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3720
Fixes: fa57924c76d9 ("drm/amd/display: Refactor function dm_dp_mst_is_port_support_mode()")
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
There are a few cleanup and refactoring tasks that need to be done
with the DML2.1 wrapper and DC interface to remove dependencies on
legacy structures and N-1 prototypes.
[How]
Implemented pipe_ctx->global_sync.
Implemented new functions to use pipe_ctx->hubp_regs and
pipe_ctx->global_sync:
- hubp_setup2
- hubp_setup_interdependent2
- Several other new functions for DCN 4.01 to support newer structures
Removed dml21_update_pipe_ctx_dchub_regs
Removed dml21_extract_legacy_watermark_set
Removed dml21_populate_pipe_ctx_dlg_param
Removed outdated dcn references in DML2.1 wrapper.
Reviewed-by: Austin Zheng <austin.zheng@amd.com>
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Rafal Ostrowski <rostrows@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY]
The defines have also been updated with prefix AMD_ and atomfirmware.h
has been temporarily updated with both sets of defines to allow the
transition.
This update is being made to standardize workaround chip_cap flags,
in order to support more workaround flags in the future.
[HOW]
Updated EXT_DISPLAY_PATH_CAPS__DP_FIXED_VS_EN define, the flag is now
an enum masked by EXT_DISPLAY_PATH_CAPS__EXT_CHIP_MASK. All checks for
DP_FIXED_VS_EN are now performed by masking with EXT_CHIP_MASK and
checking for an exact match rather than the previous bitwise AND check.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Refactoring some flags for replay
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why & How]
Build-up get/reset desync error count interface and implement the functions.
Reviewed-by: ChunTao Tso <chuntao.tso@amd.com>
Reviewed-by: Robin Chen <robin.chen@amd.com>
Signed-off-by: Jack Chang <jack.chang@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY]
On entering/exiting idle power, certain parameters would be
very useful to know for power profiling purposes.
[HOW]
This commit adds certain hard min clocks and pipe types
to log output on idle optimization enter/exit.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Sung Lee <Sung.Lee@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
Underflow and flickering was occuring due to high scaling ratios
when resizing videos.
[how]
Limit the scaling ratios by increasing the max scaling factor
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Gabe Teeger <Gabe.Teeger@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Only apply when compute profile is selected. This is
the only supported configuration. Selecting other
profiles can lead to performane degradations.
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This patch adds the cec_notifier feature to amdgpu driver.
The changes will allow amdgpu driver code to notify EDID
and HPD changes to an eventual CEC adapter.
Signed-off-by: Kun Liu <Kun.Liu2@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
In psz_init_zones, if the requested area has a total_size less than
record_size, kcalloc will be called with c == 0 and will return
ZERO_SIZE_PTR.
Further, this will lead to an oops.
With this patch, in this scenario, it will look like this :
[ 6.865545] pstore_zone: total size : 28672 Bytes
[ 6.865547] pstore_zone: kmsg size : 65536 Bytes
[ 6.865549] pstore_zone: pmsg size : 0 Bytes
[ 6.865551] pstore_zone: console size : 0 Bytes
[ 6.865553] pstore_zone: ftrace size : 0 Bytes
[ 6.872095] pstore_zone: zone dmesg total_size too small
[ 6.878234] pstore_zone: alloc zones failed
Signed-off-by: Eugen Hristev <eugen.hristev@linaro.org>
Link: https://lore.kernel.org/r/20250110125714.2594719-1-eugen.hristev@linaro.org
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
Most of these sizes and counts are capped at 256MB so the math doesn't
result in an integer overflow. The "relocs" count needs to be checked
as well. Otherwise on 32bit systems the calculation of "full_data"
could be wrong.
full_data = data_len + relocs * sizeof(unsigned long);
Fixes: c995ee28d29d ("binfmt_flat: prevent kernel dammage from corrupted executable headers")
Cc: stable@vger.kernel.org
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Nicolas Pitre <npitre@baylibre.com>
Link: https://lore.kernel.org/r/5be17f6c-5338-43be-91ef-650153b975cb@stanley.mountain
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Ilpo Järvinen:
"Fixes and new HW support:
- amd/pmc: Match IRQ1 wakeup disable with the enable on i8042 side
- intel: power-domains: Clearwater Forest support
- intel/pmc: Skip SSRAM setup when no additional devices are present
- ISST: Clearwater Forest support"
* tag 'platform-drivers-x86-v6.13-5' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: intel/pmc: Fix ioremap() of bad address
platform/x86: ISST: Add Clearwater Forest to support list
platform/x86/intel: power-domains: Add Clearwater Forest support
platform/x86/amd/pmc: Only disable IRQ1 wakeup where i8042 actually enabled it
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"A couple of fixes for !REGULATOR and !OF configurations, adding
missing stubs"
* tag 'regulator-fix-v6.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: Move OF_ API declarations/definitions outside CONFIG_REGULATOR
regulator: Guard of_regulator_bulk_get_all() with CONFIG_OF
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
"There's one small fix for real HW - gpio-loongson.
The rest concern two virtual testing drivers in which some issues were
recently found and addressed:
- fix resource leaks in error path in gpio-virtuser (and one
consistent memory leak triggered on every device removal))
- fix the use-case of having multiple con_ids in a lookup table in
gpio-virtuser which has never worked (despite being advertised)
- don't allow rmdir() on configfs directories when they are in use in
gpio-sim and gpio-virtuser
- fix register offsets in gpio-loongson-64"
* tag 'gpio-fixes-for-v6.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: loongson: Fix Loongson-2K2000 ACPI GPIO register offset
gpio: sim: lock up configfs that an instantiated device depends on
gpio: virtuser: lock up configfs that an instantiated device depends on
gpio: virtuser: fix handling of multiple conn_ids in lookup table
gpio: virtuser: fix missing lookup table cleanups
|
|
In the SPI-NAND layer, we currently make list of operation variants from
the fastest one to the slowest and there is a bit of logic in the core
to go over them and pick the first one that is supported by the
controller, ie. the fastest one among the supported ops.
This kind of logic only works if all operations run at the same
frequency, but as soon as we introduce per operation max frequencies it
is not longer as obvious which operation will be faster, especially
since it also depends on the PCB/controller frequency limitation.
One way to make this choice more clever is to go over all the
variants and for each of them derive an indicator which will help derive
the theoretical best. In this case, we derive a theoretical duration for
the entire operation and we take the smallest one.
Add a helper that parses the spi-mem operation and returns this value.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://patch.msgid.link/20250110-winbond-6-11-rc1-quad-support-v3-20-7ab4bd56cf6e@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The commit "HID: lenovo: Support for ThinkPad-X12-TAB-1/2 Kbd Fn keys"
introduced an issue where the CI failed with the following error:
ERROR: modpost: "platform_profile_cycle" [drivers/hid/hid-lenovo.ko] undefined!
This issue occurs because platform_profile_cycle is used without ensuring
the kernel is configured with CONFIG_ACPI_PLATFORM_PROFILE.
To address this, this patch adds conditional support for platform profile
management to the Fn+F8 key handling.
The functionality for platform_profile_cycle is now included only when
CONFIG_ACPI_PLATFORM_PROFILE is enabled in the kernel configuration.
This ensures compatibility with kernels that do not include the ACPI
platform profile feature, resolving the CI build issue.
Signed-off-by: Vishnu Sankar <vishnuocv@gmail.com>
Signed-off-by: Vishnu Sankar <vsankar@lenovo.com>
Suggested-by: Benjamin Tissoires <bentiss@kernel.org>
Suggested-by: Jiri Kosina <jikos@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Merge series from Miquel Raynal <miquel.raynal@bootlin.com>:
Here is a (big) series supposed to bring DTR support in SPI-NAND.
|
|
nvme multipath reports that they see spurious -EAGAIN bubbling back to
userspace, which is caused by how they handle retries internally through
a kworker. However, any data that needs preserving or importing for
a read/write request has always been done so at prep time, and we can
sanely skip this check.
Reported-by: "Haeuptle, Michael" <michael.haeuptle@hpe.com>
Link: https://lore.kernel.org/io-uring/DS7PR84MB31105C2C63CFA47BE8CBD6EE95102@DS7PR84MB3110.NAMPRD84.PROD.OUTLOOK.COM/
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Rather than try and have io_read/io_write turn REQ_F_REISSUE into
-EAGAIN, catch the REQ_F_REISSUE when the request is otherwise
considered as done. This is saner as we know this isn't happening
during an actual submission, and it removes the need to randomly
check REQ_F_REISSUE after read/write submission.
If REQ_F_REISSUE is set, __io_submit_flush_completions() will skip over
this request in terms of posting a CQE, and the regular request
cleaning will ensure that it gets reissued via io-wq.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Cleanup should always have the uring lock held, it's safe to recycle
from here.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Document the flag along with PMU events to hint what it's used for and
give an example with other useful options to get minimal output.
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Link: https://lore.kernel.org/r/20250108142904.401139-3-james.clark@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
FEAT_SPEv1p2 (optional from Armv8.6) adds a discard mode that allows all
SPE data to be discarded rather than written to memory. Add a format
bit for this mode.
If the mode isn't supported, the format bit isn't published and attempts
to use it will result in -EOPNOTSUPP. Allocating an aux buffer is still
allowed even though it won't be written to so that old tools continue to
work, but updated tools can choose to skip this step.
Signed-off-by: James Clark <james.clark@linaro.org>
Reviewd-by: Yeoreum Yun <yeoreum.yun@arm.com>
Link: https://lore.kernel.org/r/20250108142904.401139-2-james.clark@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
This field duplicate the LO_FLAGS_DIRECT_IO flag in lo_flags. Remove it
to have a single source of truth about using direct I/O.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250110073750.1582447-9-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
All callers of loop_update_dio except for loop_configure already have the
queue frozen, and loop_configure works on an unbound device. Remove the
superfluous recursive freezing in loop_update_dio and add asserts for the
locking and freezing state instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250110073750.1582447-8-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Unlike all other calls of (__)loop_update_dio, loop_set_status never
looks at the O_DIRECT flag of the backing file, and thus doesn't
re-enable direct I/O on an O_DIRECT backing file if e.g. the new block
size would allow it. Fix that and remove the need for the separate
__loop_update_dio flag.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250110073750.1582447-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
loop_set_dio is different from the other (__)loop_update_dio callers in
that it doesn't take any implicit conditions into account and wants to
update the direct I/O flag to the user passed in value and fail if that
can't be done.
Open code the logic here to prepare for simplifying the other direct I/O
flag updates and to make the error handling less convoluted.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250110073750.1582447-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
There is no point in doing an fdatasync to write out pages when switching
away from direct I/O, as there won't be any. The writeback is only
needed when switching to direct I/O, which would have to invalidate the
pagecache less efficiently from the I/O path.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250110073750.1582447-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Factor out a part of __loop_update_dio in preparation for further
refactoring.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250110073750.1582447-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The concept of transfers is gone since commit 47e9624616c8 ("block:
remove support for cryptoloop and the xor transfer").
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250110073750.1582447-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
While loop_configure simplify assigns the flags passed in by userspace,
loop_set_status only looks at the two changeable flags, and currently
has to do a complicate dance to implement that.
Move assign lo->lo_flags out of loop_set_status_from_info into the
callers and thus drastically simplify the lo_flags handling in
loop_set_status.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250110073750.1582447-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.13
A collection of device specific fixes that came in over the holidays,
plus a MAINTAINERS update and some documentation to help users debug
problems with some of the Cirrus CODECs found in modern laptops.
|
|
Match the locking order used by the core block code by only freezing
the queue after taking the limits lock using the
queue_limits_commit_update_frozen helper and document the callers that
do not freeze the queue at all.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20250110054726.1499538-12-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Replace loop_reconfigure_limits with a slightly less encompassing
loop_update_limits that expects the caller to acquire and commit the
queue limits to prepare for sorting out the freeze vs limits lock
ordering.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Link: https://lore.kernel.org/r/20250110054726.1499538-11-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Match the locking order used by the core block code by only freezing
the queue after taking the limits lock using the
queue_limits_commit_update_frozen helper.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20250110054726.1499538-10-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Match the locking order used by the core block code by only freezing
the queue after taking the limits lock using the
queue_limits_commit_update_frozen helper.
This also allows removes the need for the separate __nbd_set_size helper,
so remove it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20250110054726.1499538-9-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Match the locking order used by the core block code by only freezing
the queue after taking the limits lock.
Unlike most queue updates this does not use the
queue_limits_commit_update_frozen helper as the nvme driver want the
queue frozen for more than just the limits update.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20250110054726.1499538-8-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
queue_attr_store() always freezes a device queue before calling the
attribute store operation. For attributes that control queue limits, the
store operation will also lock the queue limits with a call to
queue_limits_start_update(). However, some drivers (e.g. SCSI sd) may
need to issue commands to a device to obtain limit values from the
hardware with the queue limits locked. This creates a potential ABBA
deadlock situation if a user attempts to modify a limit (thus freezing
the device queue) while the device driver starts a revalidation of the
device queue limits.
Avoid such deadlock by not freezing the queue before calling the
->store_limit() method in struct queue_sysfs_entry and instead use the
queue_limits_commit_update_frozen helper to freeze the queue after taking
the limits lock.
This also removes taking the sysfs lock for the store_limit method as
it doesn't protect anything here, but creates even more nesting.
Hopefully it will go away from the actual sysfs methods entirely soon.
(commit log adapted from a similar patch from Damien Le Moal)
Fixes: ff956a3be95b ("block: use queue_limits_commit_update in queue_discard_max_store")
Fixes: 0327ca9d53bf ("block: use queue_limits_commit_update in queue_max_sectors_store")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20250110054726.1499538-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
