| Age | Commit message (Collapse) | Author |
|---|
|
commit c6f597bc598a8 ("ASoC: audio-graph-card2: remove unneeded
of_node_get()") removed of_node_get(), but it need to keep original
reference, so of_node_get() itself is needed.
Because of_get_next_child() will call of_node_put() inside, if the
reference count dropped to zero, then of_node_get() after that will be
use afer free. Need to call of_node_get() *before* that.
Fixes: c6f597bc598a ("ASoC: audio-graph-card2: remove unneeded of_node_get()")
Link: https://lore.kernel.org/r/f930862e-9d30-4ea3-b3e7-b4b4f411f6d1@moroto.mountain
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/875xvmqzs8.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
A space should be put around "+=" in each line.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240510073739.23541-1-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
For DSP_A, data is a BCK cycle behind LRCK trigger edge. For DSP_B, this
delay doesn't exist. Fix the delay configuration to match the standard.
Fixes: 52fcd65414abfc ("ASoC: mediatek: mt8192: support tdm in platform driver")
Signed-off-by: Hsin-Te Yuan <yuanhsinte@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20240509-8192-tdm-v1-1-530b54645763@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Machine boards expose input device for use with userspace. Current name
in some cases is incorrect, fix it.
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20240506121106.3792340-1-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
ACP pin configuration varies based on acp version.
ACP PCI driver should read the ACP PIN config value and based on config
value, it has to create a platform device in below two conditions.
1) If ACP PDM configuration is selected from BIOS and ACP PDM controller
exists.
2) If ACP I2S configuration is selected from BIOS.
Other than above scenarios, ACP PCI driver should skip the platform
device creation logic, i.e. ACP PCI driver probe sequence should never
fail if other acp pin configuration is selected. It should skip platform
device creation logic.
check_acp_pdm() function was implemented for ACP6.x platforms to check
ACP PDM configuration. Previously, this code was safe guarded by
FLAG_AMD_LEGACY_ONLY_DMIC flag check.
This implementation breaks audio use cases for Huawei Matebooks which are
based on ACP3.x varaint uses I2S configuration.
In current scenario, check_acp_pdm() function returns -ENODEV value
which results in ACP PCI driver probe failure without creating a platform
device even in case of valid ACP pin configuration.
Implement check_acp_config() as a common function which invokes platform
specific acp pin configuration check functions for ACP3.x, ACP6.0 & ACP6.3
& ACP7.0 variants and checks for ACP PDM controller.
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218780
Fixes: 4af565de9f8c ("ASoC: amd: acp: fix for acp pdm configuration check")
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20240502140340.4049021-1-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Jerome Brunet <jbrunet@baylibre.com>:
This patchset fixes 2 problems on TDM which both find a solution
by properly implementing the .trigger() callback for the TDM backend.
ATM, enabling the TDM formatters is done by the .prepare() callback
because handling the formatter is slow due to necessary calls to CCF.
The first problem affects the TDMIN. Because .prepare() is called on DPCM
backend first, the formatter are started before the FIFOs and this may
cause a random channel shifts if the TDMIN use multiple lanes with more
than 2 slots per lanes. Using trigger() allows to set the FE/BE order,
solving the problem.
There has already been an attempt to fix this 3y ago [1] and reverted [2]
It triggered a 'sleep in irq' error on the period IRQ. The solution is
to just use the bottom half of threaded IRQ. This is patch #1. Patch #2
and #3 remain mostly the same as 3y ago.
For TDMOUT, the problem is on pause. ATM pause only stops the FIFO and
the TDMOUT just starves. When it does, it will actually repeat the last
sample continuously. Depending on the platform, if there is no high-pass
filter on the analog path, this may translate to a constant position of
the speaker membrane. There is no audible glitch but it may damage the
speaker coil.
Properly stopping the TDMOUT in pause solves the problem. There is
behaviour change associated with that fix. Clocks used to be continuous
on pause because of the problem above. They will now be gated on pause by
default, as they should. The last change introduce the proper support for
continuous clocks, if needed.
[1]: https://lore.kernel.org/linux-amlogic/20211020114217.133153-1-jbrunet@baylibre.com
[2]: https://lore.kernel.org/linux-amlogic/20220421155725.2589089-1-narmstrong@baylibre.com
|
|
The documentation for device_get_named_child_node() mentions this
important point:
"
The caller is responsible for calling fwnode_handle_put() on the
returned fwnode pointer.
"
Add fwnode_handle_put() to avoid leaked references.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240426152939.38471-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The documentation for device_get_named_child_node() mentions this
important point:
"
The caller is responsible for calling fwnode_handle_put() on the
returned fwnode pointer.
"
Add fwnode_handle_put() to avoid a leaked reference.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240426153033.38500-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Amlogic sound cards do create a lot of pcm interfaces, possibly more than
8. Some pcm interfaces are internal (like DPCM backends and c2c) and not
exposed to userspace.
Those interfaces still increase the number passed to snd_find_free_minor(),
which eventually exceeds 8 causing -EBUSY error on card registration if
CONFIG_SND_DYNAMIC_MINORS=n and the interface is exposed to userspace.
select CONFIG_SND_DYNAMIC_MINORS for Amlogic cards to avoid the problem.
Fixes: 7864a79f37b5 ("ASoC: meson: add axg sound card support")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20240426134150.3053741-1-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Some devices may need the clocks running, even while paused.
Add support for this use case.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20240426152946.3078805-5-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
So far, the formatters have been reset/enabled using the .prepare()
callback. This was done in this callback because walking the formatters use
a mutex. A mutex is used because formatter handling require dealing
possibly slow clock operation.
With the support of non-atomic, .trigger() callback may be used which also
allows to properly enable and disable formatters on start but also
pause/resume.
This solve a random shift on TDMIN as well repeated samples on for TDMOUT.
Fixes: d60e4f1e4be5 ("ASoC: meson: add tdm interface driver")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20240426152946.3078805-4-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Non atomic operations need to be performed in the trigger callback
of the TDM interfaces. Those are BEs but what matters is the nonatomic
flag of the FE in the DPCM context. Just set nonatomic for everything so,
at least, what is done is clear.
Fixes: 7864a79f37b5 ("ASoC: meson: add axg sound card support")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20240426152946.3078805-3-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
With the AXG audio subsystem, there is a possible random channel shift on
TDM capture, when the slot number per lane is more than 2, and there is
more than one lane used.
The problem has been there since the introduction of the axg audio support
but such scenario is pretty uncommon. This is why there is no loud
complains about the problem.
Solving the problem require to make the links non-atomic and use the
trigger() callback to start FEs and BEs in the appropriate order.
This was tried in the past and reverted because it caused the block irq to
sleep while atomic. However, instead of reverting, the solution is to call
snd_pcm_period_elapsed() in a non atomic context.
Use the bottom half of a threaded IRQ to do so.
Fixes: 6dc4fa179fb8 ("ASoC: meson: add axg fifo base driver")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20240426152946.3078805-2-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Volume step (dB/step) modification to fix format error
which shown in amixer control.
Signed-off-by: Jack Yu <jack.yu@realtek.com>
Link: https://lore.kernel.org/r/b1f546ad16dc4c7abb7daa7396e8345c@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Static checkers complain that the silicon_uid variable passed by
pointer to cs35l56_read_silicon_uid() could later be used
uninitialised when calling cs_amp_get_efi_calibration_data().
cs35l56_read_silicon_uid() must have succeeded to call
cs_amp_get_efi_calibration_data() and that would have populated the
variable.
However, initialise the value so we are not haunted by it forevermore.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Fixes: e1830f66f6c6 ("ASoC: cs35l56: Add helper functions for amp calibration")
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20240422103211.236063-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
WSA881x codecs do not retain the state while clock is stopped, so mark
this with clk_stop_mode1 flag.
Fixes: a0aab9e1404a ("ASoC: codecs: add wsa881x amplifier support")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20240419140012.91384-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When using davinci-mcasp as CPU DAI with simple-card, there are some
conditions that cause simple-card to finish registering a sound card before
davinci-mcasp finishes registering all sound components. This creates a
non-working sound card from userspace with no problem indication apart
from not being able to play/record audio on a PCM stream. The issue
arises during simultaneous probe execution of both drivers. Specifically,
the simple-card driver, awaiting a CPU DAI, proceeds as soon as
davinci-mcasp registers its DAI. However, this process can lead to the
client mutex lock (client_mutex in soc-core.c) being held or davinci-mcasp
being preempted before PCM DMA registration on davinci-mcasp finishes.
This situation occurs when the probes of both drivers run concurrently.
Below is the code path for this condition. To solve the issue, defer
davinci-mcasp CPU DAI registration to the last step in the audio part of
it. This way, simple-card CPU DAI parsing will be deferred until all
audio components are registered.
Fail Code Path:
simple-card.c: probe starts
simple-card.c: simple_dai_link_of: simple_parse_node(..,cpu,..) returns EPROBE_DEFER, no CPU DAI yet
davinci-mcasp.c: probe starts
davinci-mcasp.c: devm_snd_soc_register_component() register CPU DAI
simple-card.c: probes again, finish CPU DAI parsing and call devm_snd_soc_register_card()
simple-card.c: finish probe
davinci-mcasp.c: *dma_pcm_platform_register() register PCM DMA
davinci-mcasp.c: probe finish
Cc: stable@vger.kernel.org
Fixes: 9fbd58cf4ab0 ("ASoC: davinci-mcasp: Choose PCM driver based on configured DMA controller")
Signed-off-by: Joao Paulo Goncalves <joao.goncalves@toradex.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Reviewed-by: Jai Luthra <j-luthra@ti.com>
Link: https://lore.kernel.org/r/20240417184138.1104774-1-jpaulo.silvagoncalves@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When creating controls attached to widgets, there are a lot of rules if
they get their name prefixed with widget name or not. Due to that
controls ended up with weirdly looking names like "ssp0_fe DSP Volume",
while topology set it to "DSP Volume".
Fix this by setting no_wname_in_kcontrol_name to true in avs topology
widgets which disables unwanted behaviour.
Fixes: be2b81b519d7 ("ASoC: Intel: avs: Parse control tuples")
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20240418142621.2487478-1-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The patch which fixed the missing remove_late() calls missed a case
when sof_select_ipc_and_paths() could return with error and in this
case sof_init_environment() would just return with 0.
Do not ignore the error code returned by sof_select_ipc_and_paths().
Fixes: 90f8917e7a15 ("ASoC: SOF: Core: Add remove_late() to sof_init_environment failure path")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240417075804.10829-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add vendor clear control register in readable register's
callback function. This prevents an access failure reported
in Intel CI tests.
Signed-off-by: Jack Yu <jack.yu@realtek.com>
Closes: https://github.com/thesofproject/linux/issues/4860
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/6a103ce9134d49d8b3941172c87a7bd4@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Currently, all ASoC systems are set to use VPMON for DSP1RX5_SRC,
however, this is required only for internal boost systems.
External boost systems require VBSTMON instead of VPMON to be the
input to DSP1RX5_SRC.
Shared Boost Active acts like Internal boost (requires VPMON).
Shared Boost Passive acts like External boost (requires VBSTMON)
All systems require DSP1RX6_SRC to be set to VBSTMON.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://msgid.link/r/20240411142648.650921-1-sbinding@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>:
This chain fixes some problems with some previous patches for handling
the ASP1 config registers. The root of the problem is that the ownership
of these registers can be either with the firmware or the driver, and that
the chip has to be soft-reset after downloading the firmware.
This chain adds and uses a regmap_read_bypassed() function so that the
driver can leave the regmap in cache-only until the chip has rebooted,
but still poll a register to detect when the chip has rebooted.
Richard Fitzgerald (4):
regmap: Add regmap_read_bypassed()
ALSA: hda: cs35l56: Exit cache-only after
cs35l56_wait_for_firmware_boot()
ASoC: cs35l56: Fix unintended bus access while resetting amp
ASoC: cs35l56: Prevent overwriting firmware ASP config
drivers/base/regmap/regmap.c | 37 ++++++++++++++
include/linux/regmap.h | 8 +++
include/sound/cs35l56.h | 2 +
sound/pci/hda/cs35l56_hda.c | 4 ++
sound/soc/codecs/cs35l56-sdw.c | 2 -
sound/soc/codecs/cs35l56-shared.c | 83 ++++++++++++++++++++-----------
sound/soc/codecs/cs35l56.c | 26 +++++++++-
7 files changed, 130 insertions(+), 32 deletions(-)
--
2.39.2
|
|
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
The current code will reset the ChainDMA on release unconditionally which
can result the following error when the CHainDMA is not allocated:
ipc tx : 0xe040000|0x0: GLB_CHAIN_DMA
ipc tx reply: 0x2e000007|0x0: GLB_CHAIN_DMA
FW reported error: 7 - Unsupported operation requested
ipc error for msg 0xe040000|0x0
sof_pcm_stream_free: pcm_ops hw_free failed -22
Background:
Pulseaudio and Pipewire on startup opens all available streams and
closes them without triggering a start (after probing it's capabilities).
|
|
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
We somehow missed the default path for DSP libraries for LNL, and need
to restrict support for D0i3 w/ IPC4. Also add debugfs support for
firmware profile information so that sof-test scripts can show what is
being tested.
|
|
Add vrefo settings to fix jd and headset mic recording issue.
Signed-off-by: Jack Yu <jack.yu@realtek.com>
Link: https://msgid.link/r/727219ed45d3485ba8f4646700aaa8a8@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Channel numbers of dmic supports 4 channels, modify channels_max
regarding to this issue.
Signed-off-by: Jack Yu <jack.yu@realtek.com>
Link: https://msgid.link/r/6a9b1d1fb2ea4f04b2157799f04053b1@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add an optional gpio property to control external CBJ circuits
to avoid some electric noise caused by sleeve/ring2 contacts floating.
Signed-off-by: Derek Fang <derek.fang@realtek.com>
Link: https://msgid.link/r/20240408091057.14165-2-derek.fang@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The codec leaves tie combo jack's sleeve/ring2 to floating status
default. It would cause electric noise while connecting the active
speaker jack during boot or shutdown.
This patch requests a gpio to control the additional jack circuit
to tie the contacts to the ground or floating.
Signed-off-by: Derek Fang <derek.fang@realtek.com>
Link: https://msgid.link/r/20240408091057.14165-1-derek.fang@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This patch adds microphone detection for the Acer 315-24p, after which a microphone appears on the device and starts working
Signed-off-by: end.to.start <end.to.start@mail.ru>
Link: https://msgid.link/r/20240408152454.45532-1-end.to.start@mail.ru
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The SOF driver has multiple profiles to select firmware/topology
prefix/names depending on the platform and ipc_type, and each of those
fields can be overridden with kernel parameters. This results in some
cases in confusion on what configuration is actually used in a given
test.
We currently log the firmware and topology names in the kernel logs,
but there's been an ask to add the information in debugfs to simplify
test scripts used by developers and CI.
This isn't meant to be a stable ABI used by apps, changes will be
allowed as needed.
Closes: https://github.com/thesofproject/linux/issues/3867
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://msgid.link/r/20240408194147.28919-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Introduce a new field in struct sof_ipc_pcm_ops that can be used to
restrict DSP D0i3 during S0ix suspend to IPC3. With IPC4, all streams
must be stopped before S0ix suspend.
Reviewed-by: Uday M Bhat <uday.m.bhat@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240408194147.28919-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The commit cd6f2a2e6346 ("ASoC: SOF: Intel: Set the default firmware
library path for IPC4") added the default_lib_path field for all
platforms, but this was missed when LunarLake was later introduced.
Fixes: 64a63d9914a5 ("ASoC: SOF: Intel: LNL: Add support for Lunarlake platform")
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://msgid.link/r/20240408194147.28919-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The ChainDMA operation differs from normal pipelines that it is only
created when the stream started, in fact a PCM using ChainDMA has no
pipelines, modules.
To reset a ChainDMA, it needs to be first allocated in firmware. When
PulseAudio/PipeWire starts, they will probe the PCMs by opening them, check
hw_params and then close the PCM without starting audio.
Unconditionally resetting the ChainDMA can result the following error:
ipc tx : 0xe040000|0x0: GLB_CHAIN_DMA
ipc tx reply: 0x2e000007|0x0: GLB_CHAIN_DMA
FW reported error: 7 - Unsupported operation requested
ipc error for msg 0xe040000|0x0
sof_pcm_stream_free: pcm_ops hw_free failed -22
Add a new chain_dma_allocated flag to sof_ipc4_pcm_stream_priv to store the
ChainDMA allocation state and use this flag to skip sending the reset if
the ChainDMA is not allocated.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://msgid.link/r/20240409110036.9411-5-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Using the sof_ipc4_timestamp_info struct directly as sps->private data
is too restrictive, add a new generic sof_ipc4_pcm_stream_priv struct
containing the time_info to allow new information to be stored in a
generic way.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://msgid.link/r/20240409110036.9411-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The pointer to sof_ipc4_timestamp_info named most of the time as
'time_info' only to be named as 'stream_info' or 'info' in two function.
Use the consistent name of 'time_info' throughout the file.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://msgid.link/r/20240409110036.9411-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Throughout the file the pointer for snd_sof_pcm_stream is named either
'stream' or (wrongly) 'spcm' which confuses the reader.
Use 'sps' for the pointer name as it is the most common name used in SOF
codebase.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://msgid.link/r/20240409110036.9411-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Only populate the ASP1 config registers in the regmap cache if the
ASP DAI is used. This prevents regcache_sync() from overwriting
these registers with their defaults when the firmware owns
control of these registers.
On a SoundWire system the ASP could be owned by the firmware to
share reference audio with the firmware on other cs35l56. Or it
can be used as a normal codec-codec interface owned by the driver.
The driver must not overwrite the registers if the firmware has
control of them.
The original implementation for this in commit 07f7d6e7a124
("ASoC: cs35l56: Fix for initializing ASP1 mixer registers") was
to still provide defaults for these registers, assuming that if
they were never reconfigured from defaults then regcache_sync()
would not write them out because they are not dirty. Unfortunately
regcache_sync() is not that smart. If the chip has not reset (so
the driver has not called regcache_mark_dirty()) a regcache_sync()
could write out registers that are not dirty.
To avoid accidental overwriting of the ASP registers, they are
removed from the table of defaults and instead are populated with
defaults only if one of the ASP DAI configuration functions is
called. So if the DAI has never been configured, the firmware is
assumed to have ownership of these registers, and the regmap cache
will not contain any entries for them.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 07f7d6e7a124 ("ASoC: cs35l56: Fix for initializing ASP1 mixer registers")
Link: https://msgid.link/r/20240408101803.43183-5-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use the new regmap_read_bypassed() so that the regmap can be left
in cache-only mode while it is booting, but the driver can still
read boot-status and chip-id information during this time.
This fixes race conditions where some writes could be issued to the
silicon while it is still rebooting, before the driver has determined
that the boot is complete.
This is typically prevented by putting regmap into cache-only until the
hardware is ready. But this assumes that the driver does not need to
access device registers to determine when it is "ready". For cs35l56
this involves polling a register and the original implementation relied
on having special handlers to block racing callbacks until dsp_work()
is complete. However, some cases were missed, most notably the ASP DAI
functions.
The regmap_read_bypassed() function allows the fix for this to be
simplified to putting regmap into cache-only during the reset. The
initial boot stages (poll HALO_STATE and read the chip ID) are all done
bypassed. Only when the amp is seen to be booted is the cache-only
revoked.
Changes are:
- cs35l56_system_reset() now leaves the regmap in cache-only status.
- cs35l56_wait_for_firmware_boot() polls using regmap_read_bypassed().
- cs35l56_init() revokes cache-only either via cs35l56_hw_init() or
when firmware has rebooted after a soft reset.
- cs35l56_hw_init() exits cache-only after it has determined that the
amp has booted.
- cs35l56_sdw_init() doesn't disable cache-only, since this must be
deferred to cs35l56_init().
- cs35l56_runtime_resume_common() waits for firmware boot before exiting
cache-only.
These changes cover three situations where the registers are not
accessible:
1) SoundWire first-time enumeration. The regmap is kept in cache-only
until the chip is fully booted. The original code had to exit
cache-only to read chip status in cs35l56_init() and cs35l56_hw_init()
but this is now deferred to after the firmware has rebooted.
In this case cs35l56_sdw_probe() leaves regmap in cache-only
(unchanged behaviour) and cs35l56_hw_init() exits cache-only after the
firmware is booted and the chip identified.
2) Soft reset during first-time initialization. cs35l56_init() calls
cs35l56_system_reset(), which puts regmap into cache-only.
On I2C/SPI cs35l56_init() then flows through to call
cs35l56_wait_for_firmware_boot() and exit cache-only. On SoundWire
the re-enumeration will enter cs35l56_init() again, which then drops
down to call cs35l56_wait_for_firmware_boot() and exit cache-only.
3) Soft reset after firmware download. dsp_work() calls
cs35l56_system_reset(), which puts regmap into cache-only. After this
the flow is the same as (2).
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 8a731fd37f8b ("ASoC: cs35l56: Move utility functions to shared file")
Link: https://msgid.link/r/20240408101803.43183-4-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Adds calls to disable regmap cache-only after a successful return from
cs35l56_wait_for_firmware_boot().
This is to prepare for a change in the shared ASoC module that will
leave regmap in cache-only mode after cs35l56_system_reset(). This is
to prevent register accesses going to the hardware while it is
rebooting.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://msgid.link/r/20240408101803.43183-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a regmap_read_bypassed() to allow reads from the hardware registers
while the regmap is in cache-only mode.
A typical use for this is to keep the cache in cache-only mode until
the hardware has reached a valid state, but one or more status registers
must be polled to determine when this state is reached.
For example, firmware download on the cs35l56 can take several seconds if
there are multiple amps sharing limited bus bandwidth. This is too long
to block in probe() so it is done as a background task. The device must
be soft-reset to reboot the firmware and during this time the registers are
not accessible, so the cache should be in cache-only. But the driver must
poll a register to detect when reboot has completed.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 8a731fd37f8b ("ASoC: cs35l56: Move utility functions to shared file")
Link: https://msgid.link/r/20240408101803.43183-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The Asus T100TA quirk has been using an exact match on a product-name of
"T100TA" but there are also T100TAM variants with a slightly higher
clocked CPU and a metal backside which need the same quirk.
Sort the existing T100TA (stereo speakers) below the more specific
T100TAF (mono speaker) quirk and switch from exact matching to
substring matching so that the T100TA quirk will also match on
the T100TAM models.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://msgid.link/r/20240407191559.21596-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
DSPK configuration is wrong for 16-bit playback and this happens because
the client config is always fixed at 24-bit in hw_params(). Fix this by
updating the client config to 16-bit for the respective playback.
Fixes: 327ef6470266 ("ASoC: tegra: Add Tegra186 based DSPK driver")
Cc: stable@vger.kernel.org
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://msgid.link/r/20240405104306.551036-1-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Recent changes addressed PAGE_SIZE ambiguity in 2/3 locations for struct
avs_icl_memwnd2. The unaddressed one causes build errors when
PAGE_SIZE != SZ_4K.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202404070100.i3t3Jf7d-lkp@intel.com/
Fixes: 275b583d047a ("ASoC: Intel: avs: ICL-based platforms support")
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://msgid.link/r/20240408081840.1319431-1-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
- Fix MCE timer reinit locking
- Fix/improve CoCo guest random entropy pool init
- Fix SEV-SNP late disable bugs
- Fix false positive objtool build warning
- Fix header dependency bug
- Fix resctrl CPU offlining bug
* tag 'x86-urgent-2024-04-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/retpoline: Add NOENDBR annotation to the SRSO dummy return thunk
x86/mce: Make sure to grab mce_sysfs_mutex in set_bank()
x86/CPU/AMD: Track SNP host status with cc_platform_*()
x86/cc: Add cc_platform_set/_clear() helpers
x86/kvm/Kconfig: Have KVM_AMD_SEV select ARCH_HAS_CC_PLATFORM
x86/coco: Require seeding RNG with RDRAND on CoCo systems
x86/numa/32: Include missing <asm/pgtable_areas.h>
x86/resctrl: Fix uninitialized memory read when last CPU of domain goes offline
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Ingo Molnar:
"Fix various timer bugs:
- Fix a timer migration bug that may result in missed events
- Fix timer migration group hierarchy event updates
- Fix a PowerPC64 build warning
- Fix a handful of DocBook annotation bugs"
* tag 'timers-urgent-2024-04-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timers/migration: Return early on deactivation
timers/migration: Fix ignored event due to missing CPU update
vdso: Use CONFIG_PAGE_SHIFT in vdso/datapage.h
timers: Fix text inconsistencies and spelling
tick/sched: Fix struct tick_sched doc warnings
tick/sched: Fix various kernel-doc warnings
timers: Fix kernel-doc format and add Return values
time/timekeeping: Fix kernel-doc warnings and typos
time/timecounter: Fix inline documentation
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 perf fix from Ingo Molnar:
"Fix a combined PEBS events bug on x86 Intel CPUs"
* tag 'perf-urgent-2024-04-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel/ds: Don't clear ->pebs_data_cfg for the last PEBS event
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
- Address a slow memory leak with RPC-over-TCP
- Prevent another NFS4ERR_DELAY loop during CREATE_SESSION
* tag 'nfsd-6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
nfsd: hold a lighter-weight client reference over CB_RECALL_ANY
SUNRPC: Fix a slow server-side memory leak with RPC-over-TCP
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fix from Wolfram Sang:
"A host driver build fix"
* tag 'i2c-for-6.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: pxa: hide unused icr_bits[] variable
|
|
Pull xfs fix from Chandan Babu:
- Allow creating new links to special files which were not associated
with a project quota
* tag 'xfs-6.9-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: allow cross-linking special files without project quota
|
