| Age | Commit message (Collapse) | Author |
|---|
|
The call to __iter_div_u64_rem() in vdso_time_update_aux() is a wrapper
around subtraction. It cannot be used to divide large numbers, as that
introduces long, computationally expensive delays. A regular u64 division
is also not possible in the timekeeper update path as it can be too slow.
Instead of splitting the ktime_t offset into into second and subsecond
components during the timekeeper update fast-path, do it together with the
adjustment of tk->offs_aux in the slow-path. Equivalent to the handling of
offs_boot and monotonic_to_boot.
Reuse the storage of monotonic_to_boot for the new field, as it is not used
by auxiliary timekeepers.
Fixes: 380b84e168e5 ("vdso/vsyscall: Update auxiliary clock data in the datapage")
Reported-by: Miroslav Lichvar <mlichvar@redhat.com>
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250825-vdso-auxclock-division-v1-1-a1d32a16a313@linutronix.de
Closes: https://lore.kernel.org/lkml/aKwsNNWsHJg8IKzj@localhost/
|
|
The event_limit can be set by the PERF_EVENT_IOC_REFRESH to limit the
number of events. When the event_limit reaches 0, the POLL_HUP signal
should be sent. But it's missed.
The corresponding counter should be stopped when the event_limit reaches
0. It was implemented in the ARCH-specific code. However, since the
commit 9734e25fbf5a ("perf: Fix the throttle logic for a group"), all
the ARCH-specific code has been moved to the generic code. The code to
handle the event_limit was lost.
Add the event->pmu->stop(event, 0); back.
Fixes: 9734e25fbf5a ("perf: Fix the throttle logic for a group")
Closes: https://lore.kernel.org/lkml/aICYAqM5EQUlTqtX@li-2b55cdcc-350b-11b2-a85c-a78bff51fc11.ibm.com/
Reported-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Link: https://lkml.kernel.org/r/20250811182644.1305952-1-kan.liang@linux.intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ath/ath
Jeff Johnson says:
==================
ath.git update for v6.17-rc5
Fix a long-standing issue with ath11k dropping group data packets
during GTK rekey, and fix an omission in the ath12k multi-link EMLSR
support introduced in v6.16.
==================
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Fix the following copy overflow warning identified by Smatch checker.
drivers/net/wireless/microchip/wilc1000/wlan_cfg.c:184 wilc_wlan_parse_response_frame()
error: '__memcpy()' 'cfg->s[i]->str' copy overflow (512 vs 65537)
This patch introduces size check before accessing the memory buffer.
The checks are base on the WID type of received data from the firmware.
For WID string configuration, the size limit is determined by individual
element size in 'struct wilc_cfg_str_vals' that is maintained in 'len' field
of 'struct wilc_cfg_str'.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/linux-wireless/aLFbr9Yu9j_TQTey@stanley.mountain
Suggested-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Link: https://patch.msgid.link/20250829225829.5423-1-ajay.kathat@microchip.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
If the ssid->datalen is more than IEEE80211_MAX_SSID_LEN (32) it would
lead to memory corruption so add some bounds checking.
Fixes: c38c70185101 ("wifi: cfg80211: Set SSID if it is not already set")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/0aaaae4a3ed37c6252363c34ae4904b1604e8e32.1756456951.git.dan.carpenter@linaro.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
If the ssid_eid[1] length is more that 32 it leads to memory corruption.
Fixes: a910e4a94f69 ("cw1200: add driver for the ST-E CW1100 & CW1200 WLAN chipsets")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/2a40f5ec7617144aef412034c12919a4927d90ad.1756456951.git.dan.carpenter@linaro.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
If the ssidie[1] length is more that 32 it leads to memory corruption.
Fixes: a910e4a94f69 ("cw1200: add driver for the ST-E CW1100 & CW1200 WLAN chipsets")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/e91fb43fcedc4893b604dfb973131661510901a7.1756456951.git.dan.carpenter@linaro.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Since commit 9d7a0ab1c753 ("crypto: ahash - Handle partial blocks in
API"), the recently-added export_core() and import_core() methods in
struct shash_alg have effectively become mandatory (even though it is
not tested or enforced), since legacy drivers that need a fallback
depend on them. Make crypto/sha512.c compatible with these legacy
drivers by adding export_core() and import_core() methods to it.
Reported-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reported-by: Ovidiu Panait <ovidiu.panait.oss@gmail.com>
Closes: https://lore.kernel.org/r/aLSnCc9Ws5L9y+8X@gcabiddu-mobl.ger.corp.intel.com
Fixes: 4bc7f7b687a2 ("crypto: sha512 - Use same state format as legacy drivers")
Tested-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Tested-by: Ovidiu Panait <ovidiu.panait.oss@gmail.com>
Link: https://lore.kernel.org/r/20250901165013.48649-4-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Since commit 9d7a0ab1c753 ("crypto: ahash - Handle partial blocks in
API"), the recently-added export_core() and import_core() methods in
struct shash_alg have effectively become mandatory (even though it is
not tested or enforced), since legacy drivers that need a fallback
depend on them. Make crypto/sha256.c compatible with these legacy
drivers by adding export_core() and import_core() methods to it.
Reported-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reported-by: Ovidiu Panait <ovidiu.panait.oss@gmail.com>
Closes: https://lore.kernel.org/r/aLSnCc9Ws5L9y+8X@gcabiddu-mobl.ger.corp.intel.com
Fixes: 07f090959bba ("crypto: sha256 - Use same state format as legacy drivers")
Tested-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Tested-by: Ovidiu Panait <ovidiu.panait.oss@gmail.com>
Link: https://lore.kernel.org/r/20250901165013.48649-3-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Since commit 9d7a0ab1c753 ("crypto: ahash - Handle partial blocks in
API"), the recently-added export_core() and import_core() methods in
struct shash_alg have effectively become mandatory (even though it is
not tested or enforced), since legacy drivers that need a fallback
depend on them. Make crypto/sha1.c compatible with these legacy drivers
by adding export_core() and import_core() methods to it.
Reported-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reported-by: Ovidiu Panait <ovidiu.panait.oss@gmail.com>
Closes: https://lore.kernel.org/r/aLSnCc9Ws5L9y+8X@gcabiddu-mobl.ger.corp.intel.com
Fixes: b10a74abcfc5 ("crypto: sha1 - Use same state format as legacy drivers")
Tested-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Tested-by: Ovidiu Panait <ovidiu.panait.oss@gmail.com>
Link: https://lore.kernel.org/r/20250901165013.48649-2-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Print the negotiated encryption cipher type in DebugData
Signed-off-by: Bharath SM <bharathsm@microsoft.com>
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Add smb3_lease_break_enter to trace lease break notifications,
recording lease state, flags, epoch, and lease key. Align
smb3_lease_not_found to use the same payload and print format.
Signed-off-by: Bharath SM <bharathsm@microsoft.com>
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
correct spellings in comments
Signed-off-by: Bharath SM <bharathsm@microsoft.com>
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Fix multiple fwnode reference leaks:
1. The function calls fwnode_get_named_child_node() to get the "leds" node,
but never calls fwnode_handle_put(leds) to release this reference.
2. Within the fwnode_for_each_child_node() loop, the early return
paths that don't properly release the "led" fwnode reference.
This fix follows the same pattern as commit d029edefed39
("net dsa: qca8k: fix usages of device_get_named_child_node()")
Fixes: 94a2a84f5e9e ("net: dsa: mv88e6xxx: Support LED control")
Cc: stable@vger.kernel.org
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patch.msgid.link/20250901073224.2273103-1-linmq006@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
devconf->rpl_seg_enabled can be changed concurrently from
/proc/sys/net/ipv6/conf, annotate lockless reads on it.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Link: https://patch.msgid.link/20250901123726.1972881-2-yuehaibing@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Ido Schimmel says:
====================
vxlan: Fix NPDs when using nexthop objects
With FDB nexthop groups, VXLAN FDB entries do not necessarily point to
a remote destination but rather to an FDB nexthop group. This means that
first_remote_{rcu,rtnl}() can return NULL and a few places in the driver
were not ready for that, resulting in NULL pointer dereferences.
Patches #1-#2 fix these NPDs.
Note that vxlan_fdb_find_uc() still dereferences the remote returned by
first_remote_rcu() without checking that it is not NULL, but this
function is only invoked by a single driver which vetoes the creation of
FDB nexthop groups. I will patch this in net-next to make the code less
fragile.
Patch #3 adds a selftests which exercises these code paths and tests
basic Tx functionality with FDB nexthop groups. I verified that the test
crashes the kernel without the first two patches.
====================
Link: https://patch.msgid.link/20250901065035.159644-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add test cases for VXLAN with FDB nexthop groups, testing both IPv4 and
IPv6. Test basic Tx functionality as well as some corner cases.
Example output:
# ./test_vxlan_nh.sh
TEST: VXLAN FDB nexthop: IPv4 basic Tx [ OK ]
TEST: VXLAN FDB nexthop: IPv6 basic Tx [ OK ]
TEST: VXLAN FDB nexthop: learning [ OK ]
TEST: VXLAN FDB nexthop: IPv4 proxy [ OK ]
TEST: VXLAN FDB nexthop: IPv6 proxy [ OK ]
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20250901065035.159644-4-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When the "proxy" option is enabled on a VXLAN device, the device will
suppress ARP requests and IPv6 Neighbor Solicitation messages if it is
able to reply on behalf of the remote host. That is, if a matching and
valid neighbor entry is configured on the VXLAN device whose MAC address
is not behind the "any" remote (0.0.0.0 / ::).
The code currently assumes that the FDB entry for the neighbor's MAC
address points to a valid remote destination, but this is incorrect if
the entry is associated with an FDB nexthop group. This can result in a
NPD [1][3] which can be reproduced using [2][4].
Fix by checking that the remote destination exists before dereferencing
it.
[1]
BUG: kernel NULL pointer dereference, address: 0000000000000000
[...]
CPU: 4 UID: 0 PID: 365 Comm: arping Not tainted 6.17.0-rc2-virtme-g2a89cb21162c #2 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-4.fc41 04/01/2014
RIP: 0010:vxlan_xmit+0xb58/0x15f0
[...]
Call Trace:
<TASK>
dev_hard_start_xmit+0x5d/0x1c0
__dev_queue_xmit+0x246/0xfd0
packet_sendmsg+0x113a/0x1850
__sock_sendmsg+0x38/0x70
__sys_sendto+0x126/0x180
__x64_sys_sendto+0x24/0x30
do_syscall_64+0xa4/0x260
entry_SYSCALL_64_after_hwframe+0x4b/0x53
[2]
#!/bin/bash
ip address add 192.0.2.1/32 dev lo
ip nexthop add id 1 via 192.0.2.2 fdb
ip nexthop add id 10 group 1 fdb
ip link add name vx0 up type vxlan id 10010 local 192.0.2.1 dstport 4789 proxy
ip neigh add 192.0.2.3 lladdr 00:11:22:33:44:55 nud perm dev vx0
bridge fdb add 00:11:22:33:44:55 dev vx0 self static nhid 10
arping -b -c 1 -s 192.0.2.1 -I vx0 192.0.2.3
[3]
BUG: kernel NULL pointer dereference, address: 0000000000000000
[...]
CPU: 13 UID: 0 PID: 372 Comm: ndisc6 Not tainted 6.17.0-rc2-virtmne-g6ee90cb26014 #3 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1v996), BIOS 1.17.0-4.fc41 04/01/2x014
RIP: 0010:vxlan_xmit+0x803/0x1600
[...]
Call Trace:
<TASK>
dev_hard_start_xmit+0x5d/0x1c0
__dev_queue_xmit+0x246/0xfd0
ip6_finish_output2+0x210/0x6c0
ip6_finish_output+0x1af/0x2b0
ip6_mr_output+0x92/0x3e0
ip6_send_skb+0x30/0x90
rawv6_sendmsg+0xe6e/0x12e0
__sock_sendmsg+0x38/0x70
__sys_sendto+0x126/0x180
__x64_sys_sendto+0x24/0x30
do_syscall_64+0xa4/0x260
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x7f383422ec77
[4]
#!/bin/bash
ip address add 2001:db8:1::1/128 dev lo
ip nexthop add id 1 via 2001:db8:1::1 fdb
ip nexthop add id 10 group 1 fdb
ip link add name vx0 up type vxlan id 10010 local 2001:db8:1::1 dstport 4789 proxy
ip neigh add 2001:db8:1::3 lladdr 00:11:22:33:44:55 nud perm dev vx0
bridge fdb add 00:11:22:33:44:55 dev vx0 self static nhid 10
ndisc6 -r 1 -s 2001:db8:1::1 -w 1 2001:db8:1::3 vx0
Fixes: 1274e1cc4226 ("vxlan: ecmp support for mac fdb entries")
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20250901065035.159644-3-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
VXLAN FDB entries can point to either a remote destination or an FDB
nexthop group. The latter is usually used in EVPN deployments where
learning is disabled.
However, when learning is enabled, an incoming packet might try to
refresh an FDB entry that points to an FDB nexthop group and therefore
does not have a remote. Such packets should be dropped, but they are
only dropped after dereferencing the non-existent remote, resulting in a
NPD [1] which can be reproduced using [2].
Fix by dropping such packets earlier. Remove the misleading comment from
first_remote_rcu().
[1]
BUG: kernel NULL pointer dereference, address: 0000000000000000
[...]
CPU: 13 UID: 0 PID: 361 Comm: mausezahn Not tainted 6.17.0-rc1-virtme-g9f6b606b6b37 #1 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-4.fc41 04/01/2014
RIP: 0010:vxlan_snoop+0x98/0x1e0
[...]
Call Trace:
<TASK>
vxlan_encap_bypass+0x209/0x240
encap_bypass_if_local+0xb1/0x100
vxlan_xmit_one+0x1375/0x17e0
vxlan_xmit+0x6b4/0x15f0
dev_hard_start_xmit+0x5d/0x1c0
__dev_queue_xmit+0x246/0xfd0
packet_sendmsg+0x113a/0x1850
__sock_sendmsg+0x38/0x70
__sys_sendto+0x126/0x180
__x64_sys_sendto+0x24/0x30
do_syscall_64+0xa4/0x260
entry_SYSCALL_64_after_hwframe+0x4b/0x53
[2]
#!/bin/bash
ip address add 192.0.2.1/32 dev lo
ip address add 192.0.2.2/32 dev lo
ip nexthop add id 1 via 192.0.2.3 fdb
ip nexthop add id 10 group 1 fdb
ip link add name vx0 up type vxlan id 10010 local 192.0.2.1 dstport 12345 localbypass
ip link add name vx1 up type vxlan id 10020 local 192.0.2.2 dstport 54321 learning
bridge fdb add 00:11:22:33:44:55 dev vx0 self static dst 192.0.2.2 port 54321 vni 10020
bridge fdb add 00:aa:bb:cc:dd:ee dev vx1 self static nhid 10
mausezahn vx0 -a 00:aa:bb:cc:dd:ee -b 00:11:22:33:44:55 -c 1 -q
Fixes: 1274e1cc4226 ("vxlan: ecmp support for mac fdb entries")
Reported-by: Marlin Cremers <mcremers@cloudbear.nl>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20250901065035.159644-2-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Correct the Mode Control Register (MODCTRL) offset for RZ/N MIIC.
According to the R-IN Engine and Ethernet Peripherals Manual (Rev.1.30)
[0], Table 10.1 "Ethernet Accessory Register List", MODCTRL is at offset
0x8, not 0x20 as previously defined.
Offset 0x20 actually maps to the Port Trigger Control Register (PTCTRL),
which controls PTP_MODE[3:0] and RGMII_CLKSEL[4]. Using this incorrect
definition prevented the driver from configuring the SW_MODE[4:0] bits
in MODCTRL, which control the internal connection of Ethernet ports. As
a result, the MIIC could not be switched into the correct mode, leading
to link setup failures and non-functional Ethernet ports on affected
systems.
[0] https://www.renesas.com/en/document/mah/rzn1d-group-rzn1s-group-rzn1l-group-users-manual-r-engine-and-ethernet-peripherals?r=1054571
Fixes: 7dc54d3b8d91 ("net: pcs: add Renesas MII converter driver")
Cc: stable@kernel.org
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://patch.msgid.link/20250901112019.16278-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When sending llc packets with vlan tx offload, the hardware fails to
actually add the tag. Deal with this by fixing it up in software.
Fixes: 656e705243fd ("net-next: mediatek: add support for MT7623 ethernet")
Reported-by: Thibaut VARENE <hacks@slashdirt.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250831182007.51619-1-nbd@nbd.name
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Russell King says:
====================
net: fix optical SFP failures
A regression was reported back in April concerning pcs-lynx and 10G
optical SFPs. This patch series addresses that regression, and likely
similar unreported regressions.
These patches:
- Add phy_interface_weight() which will be used in the solution.
- Split out the code that determines the inband "type" for an
interface mode.
- Clear the Autoneg bit in the advertising mask, or the Autoneg bit
in the support mask and the entire advertising mask if the selected
interface mode has no inband capabilties.
Tested with the mvpp2 patch posted earlier today.
====================
Link: https://patch.msgid.link/aLSHmddAqiCISeK3@shell.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Mathew reports that as a result of commit 6561f0e547be ("net: pcs:
pcs-lynx: implement pcs_inband_caps() method"), 10G SFP modules no
longer work with the Lynx PCS.
This problem is not specific to the Lynx PCS, but is caused by commit
df874f9e52c3 ("net: phylink: add pcs_inband_caps() method") which added
validation of the autoneg state to the optical SFP configuration path.
Fix this by handling interface modes that fundamentally have no
inband negotiation more correctly - if we only have a single interface
mode, clear the Autoneg support bit and the advertising mask. If the
module can operate with several different interface modes, autoneg may
be supported for other modes, so leave the support mask alone and just
clear the Autoneg bit in the advertising mask.
This restores 10G optical module functionality with PCS that supply
their inband support, and makes ethtool output look sane.
Reported-by: Mathew McBride <matt@traverse.com.au>
Closes: https://lore.kernel.org/r/025c0ebe-5537-4fa3-b05a-8b835e5ad317@app.fastmail.com
Fixes: df874f9e52c3 ("net: phylink: add pcs_inband_caps() method")
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/E1uslwx-00000001SPB-2kiM@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Provide a function to get the type of the inband signalling used for
a PHY interface type. This will be used in the subsequent patch to
address problems with 10G optical modules.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/E1uslws-00000001SP5-1R2R@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/E1uslwn-00000001SOx-0a7H@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When tcp_ao_copy_all_matching() fails in tcp_v6_syn_recv_sock() it just
exits the function. This ends up causing a memory-leak:
unreferenced object 0xffff0000281a8200 (size 2496):
comm "softirq", pid 0, jiffies 4295174684
hex dump (first 32 bytes):
7f 00 00 06 7f 00 00 06 00 00 00 00 cb a8 88 13 ................
0a 00 03 61 00 00 00 00 00 00 00 00 00 00 00 00 ...a............
backtrace (crc 5ebdbe15):
kmemleak_alloc+0x44/0xe0
kmem_cache_alloc_noprof+0x248/0x470
sk_prot_alloc+0x48/0x120
sk_clone_lock+0x38/0x3b0
inet_csk_clone_lock+0x34/0x150
tcp_create_openreq_child+0x3c/0x4a8
tcp_v6_syn_recv_sock+0x1c0/0x620
tcp_check_req+0x588/0x790
tcp_v6_rcv+0x5d0/0xc18
ip6_protocol_deliver_rcu+0x2d8/0x4c0
ip6_input_finish+0x74/0x148
ip6_input+0x50/0x118
ip6_sublist_rcv+0x2fc/0x3b0
ipv6_list_rcv+0x114/0x170
__netif_receive_skb_list_core+0x16c/0x200
netif_receive_skb_list_internal+0x1f0/0x2d0
This is because in tcp_v6_syn_recv_sock (and the IPv4 counterpart), when
exiting upon error, inet_csk_prepare_forced_close() and tcp_done() need
to be called. They make sure the newsk will end up being correctly
free'd.
tcp_v4_syn_recv_sock() makes this very clear by having the put_and_exit
label that takes care of things. So, this patch here makes sure
tcp_v4_syn_recv_sock and tcp_v6_syn_recv_sock have similar
error-handling and thus fixes the leak for TCP-AO.
Fixes: 06b22ef29591 ("net/tcp: Wire TCP-AO to request sockets")
Signed-off-by: Christoph Paasch <cpaasch@openai.com>
Reviewed-by: Dmitry Safonov <0x7f454c46@gmail.com>
Link: https://patch.msgid.link/20250830-tcpao_leak-v1-1-e5878c2c3173@openai.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix sparse warnings about endianness. Store DMA addr to a variable
of correct type and then only convert it when writing to the descriptor.
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250901210818.1025316-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This reverts commit 8401a108a63302a5a198c7075d857895ca624851.
I got a report from an (anonymous) Sundance user:
Ethernet controller: Sundance Technology Inc / IC Plus Corp IC Plus IP100A Integrated 10/100 Ethernet MAC + PHY (rev 31)
Revert the driver back in. Make following changes:
- update Denis's email address in MAINTAINERS
- adjust to timer API renames:
- del_timer_sync() -> timer_delete_sync()
- from_timer() -> timer_container_of()
Fixes: 8401a108a633 ("eth: remove the DLink/Sundance (ST201) driver")
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250901210818.1025316-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
During GTK rekey, mac80211 issues a clear key (if the old key exists)
followed by an install key operation in the same context. This causes
ath11k to send two WMI commands in quick succession: one to clear the
old key and another to install the new key in the same slot.
Under certain conditions—especially under high load or time sensitive
scenarios, firmware may process these commands asynchronously in a way
that firmware assumes the key is cleared whereas hardware has a valid key.
This inconsistency between hardware and firmware leads to group addressed
packet drops. Only setting the same key again can restore a valid key in
firmware and allow packets to be transmitted.
This issue remained latent because the host's clear key commands were
not effective in firmware until commit 436a4e886598 ("ath11k: clear the
keys properly via DISABLE_KEY"). That commit enabled the host to
explicitly clear group keys, which inadvertently exposed the race.
To mitigate this, restrict group key clearing across all modes (AP, STA,
MESH). During rekey, the new key can simply be set on top of the previous
one, avoiding the need for a clear followed by a set.
However, in AP mode specifically, permit group key clearing when no
stations are associated. This exception supports transitions from secure
modes (e.g., WPA2/WPA3) to open mode, during which all associated peers
are removed and the group key is cleared as part of the transition.
Add a per-BSS station counter to track the presence of stations during
set key operations. Also add a reset_group_keys flag to track the key
re-installation state and avoid repeated installation of the same key
when the number of connected stations transitions to non-zero within a
rekey period.
Additionally, for AP and Mesh modes, when the first station associates,
reinstall the same group key that was last set. This ensures that the
firmware recovers from any race that may have occurred during a previous
key clear when no stations were associated.
This change ensures that key clearing is permitted only when no clients
are connected, avoiding packet loss while enabling dynamic security mode
transitions.
Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.9.0.1-02146-QCAHKSWPL_SILICONZ-1
Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.41
Reported-by: Steffen Moser <lists@steffen-moser.de>
Closes: https://lore.kernel.org/linux-wireless/c6366409-9928-4dd7-bf7b-ba7fcf20eabf@steffen-moser.de
Fixes: 436a4e886598 ("ath11k: clear the keys properly via DISABLE_KEY")
Signed-off-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Tested-by: Nicolas Escande <nico.escande@gmail.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250810170018.1124014-1-rameshkumar.sundaram@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Currently, when updating EMLSR capabilities of a multi-link (ML) station,
only the EMLSR parameters (e.g., padding delay, transition delay, and
timeout) are sent to firmware. However, firmware also requires the
EMLSR support flag to be set in the MLO flags of the peer assoc WMI
command to properly handle EML operating mode notification frames.
Set the ATH12K_WMI_FLAG_MLO_EMLSR_SUPPORT flag in the peer assoc WMI
command when the ML station is EMLSR-capable, so that the firmware can
respond to EHT EML action frames from associated stations.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Fixes: 4bcf9525bc49 ("wifi: ath12k: update EMLSR capabilities of ML Station")
Signed-off-by: Ramya Gnanasekar <ramya.gnanasekar@oss.qualcomm.com>
Signed-off-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250801104920.3326352-1-rameshkumar.sundaram@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
In get_bpf_prog_info_linear two calls to bpf_obj_get_info_by_fd are
made, the first to compute memory requirements for a struct perf_bpil
and the second to fill it in. Previously the code would warn when the
second call didn't match the first. Such races can be common place in
things like perf test, whose perf trace tests will frequently load BPF
programs. Rather than a debug message, return actual errors for this
case. Out of paranoia also validate the read bpf_prog_info array
value. Change the type of ptr to avoid mismatched pointer type
compiler warnings. Add some additional debug print outs and sanity
asserts.
Closes: https://lore.kernel.org/lkml/CAP-5=fWJQcmUOP7MuCA2ihKnDAHUCOBLkQFEkQES-1ZZTrgf8Q@mail.gmail.com/
Fixes: 6ac22d036f86 ("perf bpf: Pull in bpf_program__get_prog_info_linear()")
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250902181713.309797-4-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
The array's contents is a compile time constant. Constify to make the
code more intention revealing and avoid unintended errors.
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250902181713.309797-3-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Calls to perf_env__insert_bpf_prog_info may fail as a sideband thread
may already have inserted the bpf_prog_info. Such failures may yield
info_linear being freed which then causes use-after-free issues with
the internal bpf_prog_info info struct. Make it so that
perf_env__insert_bpf_prog_info trigger early non-error paths and fix
the use-after-free in perf_event__synthesize_one_bpf_prog. Add proper
return error handling to perf_env__add_bpf_info (that calls
perf_env__insert_bpf_prog_info) and propagate the return value in its
callers.
Closes: https://lore.kernel.org/lkml/CAP-5=fWJQcmUOP7MuCA2ihKnDAHUCOBLkQFEkQES-1ZZTrgf8Q@mail.gmail.com/
Fixes: 03edb7020bb9 ("perf bpf: Fix two memory leakages when calling perf_env__insert_bpf_prog_info()")
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250902181713.309797-2-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Add quirk for a copper SFP that identifies itself as "FLYPRO"
"SFP-10GT-CS-30M". It uses RollBall protocol to talk to the PHY.
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/20250831105910.3174-1-olek2@wp.pl
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small changes including a few regression fixes:
- Regression fix for Intel SKL/KBL HD-audio bindings
- Regression fix for missing Nvidia HDMI codec entries after the
recent code reorganization
- A few TAS2781 codec regression fixes
- Fix for ASoC component lookup breakage
- Usual HD-audio, USB-audio and SOF quirk entries"
* tag 'sound-6.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/hdmi: Add pin fix for another HP EliteDesk 800 G4 model
ALSA: usb-audio: Allow Focusrite devices to use low samplerates
ALSA: hda: tas2781: reorder tas2563 calibration variables
ALSA: hda: tas2781: fix tas2563 EFI data endianness
ALSA: firewire-motu: drop EPOLLOUT from poll return values as write is not supported
ALSA: docs: Add documents for recently changes in snd-usb-audio
ALSA: usb-audio: Add mute TLV for playback volumes on more devices
ASoC: SOF: Intel: WCL: Add the sdw_process_wakeen op
ALSA: hda: Avoid binding with SOF for SKL/KBL platforms
ASoC: rsnd: tidyup direction name on rsnd_dai_connect()
ALSA: hda/tas2781: Fix EFI name for calibration beginning with 1 instead of 0
ALSA: usb-audio: move mixer_quirks' min_mute into common quirk
ALSA: hda/realtek: Fix headset mic for TongFang X6[AF]R5xxY
ALSA: hda/hdmi: Restore missing HDMI codec entries
ASoC: codecs: idt821034: fix wrong log in idt821034_chip_direction_output()
ASoC: soc-core: tidyup snd_soc_lookup_component_nolocked()
ASoC: soc-core: care NULL dirver name on snd_soc_lookup_component_nolocked()
ALSA: hda: intel-dsp-config: Select SOF driver on MTL Chromebooks
ALSA: usb-audio: Add mute TLV for playback volumes on some devices
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"17 hotfixes. 13 are cc:stable and the remainder address post-6.16
issues or aren't considered necessary for -stable kernels. 11 of these
fixes are for MM.
This includes a three-patch series from Harry Yoo which fixes an
intermittent boot failure which can occur on x86 systems. And a
two-patch series from Alexander Gordeev which fixes a KASAN crash on
S390 systems"
* tag 'mm-hotfixes-stable-2025-09-01-17-20' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm: fix possible deadlock in kmemleak
x86/mm/64: define ARCH_PAGE_TABLE_SYNC_MASK and arch_sync_kernel_mappings()
mm: introduce and use {pgd,p4d}_populate_kernel()
mm: move page table sync declarations to linux/pgtable.h
proc: fix missing pde_set_flags() for net proc files
mm: fix accounting of memmap pages
mm/damon/core: prevent unnecessary overflow in damos_set_effective_quota()
kexec: add KEXEC_FILE_NO_CMA as a legal flag
kasan: fix GCC mem-intrinsic prefix with sw tags
mm/kasan: avoid lazy MMU mode hazards
mm/kasan: fix vmalloc shadow memory (de-)population races
kunit: kasan_test: disable fortify string checker on kasan_strings() test
selftests/mm: fix FORCE_READ to read input value correctly
mm/userfaultfd: fix kmap_local LIFO ordering for CONFIG_HIGHPTE
ocfs2: prevent release journal inode after journal shutdown
rust: mm: mark VmaNew as transparent
of_numa: fix uninitialized memory nodes causing kernel panic
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- fix a few races related to inode link count
- fix inode leak on failure to add link to inode
- move transaction aborts closer to where they happen
* tag 'for-6.17-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: avoid load/store tearing races when checking if an inode was logged
btrfs: fix race between setting last_dir_index_offset and inode logging
btrfs: fix race between logging inode and checking if it was logged before
btrfs: simplify error handling logic for btrfs_link()
btrfs: fix inode leak on failure to add link to inode
btrfs: abort transaction on failure to add link to inode
|
|
I recently ran into an issue where the PI generated using the block layer
integrity code differs from that from a kernel using the PRACT fallback
when the block layer integrity code is disabled, and I tracked this down
to us using PRACT incorrectly.
The NVM Command Set Specification (section 5.33 in 1.2, similar in older
versions) specifies the PRACT insert behavior as:
Inserted protection information consists of the computed CRC for the
protection information format (refer to section 5.3.1) in the Guard
field, the LBAT field value in the Application Tag field, the LBST
field value in the Storage Tag field, if defined, and the computed
reference tag in the Logical Block Reference Tag.
Where the computed reference tag is defined as following for type 1 and
type 2 using the text below that is duplicated in the respective bullet
points:
the value of the computed reference tag for the first logical block of
the command is the value contained in the Initial Logical Block
Reference Tag (ILBRT) or Expected Initial Logical Block Reference Tag
(EILBRT) field in the command, and the computed reference tag is
incremented for each subsequent logical block.
So we need to set ILBRT field, but we currently don't. Interestingly
this works fine on my older type 1 formatted SSD, but Qemu trips up on
this. We already set ILBRT for Write Same since commit aeb7bb061be5
("nvme: set the PRACT bit when using Write Zeroes with T10 PI").
To ease this, move the PI type check into nvme_set_ref_tag.
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
There is a race condition between inode eviction and inode caching that
can cause a live struct btrfs_inode to be missing from the root->inodes
xarray. Specifically, there is a window during evict() between the inode
being unhashed and deleted from the xarray. If btrfs_iget() is called
for the same inode in that window, it will be recreated and inserted
into the xarray, but then eviction will delete the new entry, leaving
nothing in the xarray:
Thread 1 Thread 2
---------------------------------------------------------------
evict()
remove_inode_hash()
btrfs_iget_path()
btrfs_iget_locked()
btrfs_read_locked_inode()
btrfs_add_inode_to_root()
destroy_inode()
btrfs_destroy_inode()
btrfs_del_inode_from_root()
__xa_erase
In turn, this can cause issues for subvolume deletion. Specifically, if
an inode is in this lost state, and all other inodes are evicted, then
btrfs_del_inode_from_root() will call btrfs_add_dead_root() prematurely.
If the lost inode has a delayed_node attached to it, then when
btrfs_clean_one_deleted_snapshot() calls btrfs_kill_all_delayed_nodes(),
it will loop forever because the delayed_nodes xarray will never become
empty (unless memory pressure forces the inode out). We saw this
manifest as soft lockups in production.
Fix it by only deleting the xarray entry if it matches the given inode
(using __xa_cmpxchg()).
Fixes: 310b2f5d5a94 ("btrfs: use an xarray to track open inodes in a root")
Cc: stable@vger.kernel.org # 6.11+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Co-authored-by: Leo Martins <loemra.dev@gmail.com>
Signed-off-by: Leo Martins <loemra.dev@gmail.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
than page size
[BUG]
With 64K page size (aarch64 with 64K page size config) and 4K btrfs
block size, the following workload can easily lead to a corrupted read:
mkfs.btrfs -f -s 4k $dev > /dev/null
mount -o compress $dev $mnt
xfs_io -f -c "pwrite -S 0xff 0 64k" $mnt/base > /dev/null
echo "correct result:"
od -Ad -t x1 $mnt/base
xfs_io -f -c "reflink $mnt/base 32k 0 32k" \
-c "reflink $mnt/base 0 32k 32k" \
-c "pwrite -S 0xff 60k 4k" $mnt/new > /dev/null
echo "incorrect result:"
od -Ad -t x1 $mnt/new
umount $mnt
This shows the following result:
correct result:
0000000 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
*
0065536
incorrect result:
0000000 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
*
0032768 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
*
0061440 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
*
0065536
Notice the zero in the range [32K, 60K), which is incorrect.
[CAUSE]
With extra trace printk, it shows the following events during od:
(some unrelated info removed like CPU and context)
od-3457 btrfs_do_readpage: enter r/i=5/258 folio=0(65536) prev_em_start=0000000000000000
The "r/i" is indicating the root and inode number. In our case the file
"new" is using ino 258 from fs tree (root 5).
Here notice the @prev_em_start pointer is NULL. This means the
btrfs_do_readpage() is called from btrfs_read_folio(), not from
btrfs_readahead().
od-3457 btrfs_do_readpage: r/i=5/258 folio=0(65536) cur=0 got em start=0 len=32768
od-3457 btrfs_do_readpage: r/i=5/258 folio=0(65536) cur=4096 got em start=0 len=32768
od-3457 btrfs_do_readpage: r/i=5/258 folio=0(65536) cur=8192 got em start=0 len=32768
od-3457 btrfs_do_readpage: r/i=5/258 folio=0(65536) cur=12288 got em start=0 len=32768
od-3457 btrfs_do_readpage: r/i=5/258 folio=0(65536) cur=16384 got em start=0 len=32768
od-3457 btrfs_do_readpage: r/i=5/258 folio=0(65536) cur=20480 got em start=0 len=32768
od-3457 btrfs_do_readpage: r/i=5/258 folio=0(65536) cur=24576 got em start=0 len=32768
od-3457 btrfs_do_readpage: r/i=5/258 folio=0(65536) cur=28672 got em start=0 len=32768
These above 32K blocks will be read from the first half of the
compressed data extent.
od-3457 btrfs_do_readpage: r/i=5/258 folio=0(65536) cur=32768 got em start=32768 len=32768
Note here there is no btrfs_submit_compressed_read() call. Which is
incorrect now.
Although both extent maps at 0 and 32K are pointing to the same compressed
data, their offsets are different thus can not be merged into the same
read.
So this means the compressed data read merge check is doing something
wrong.
od-3457 btrfs_do_readpage: r/i=5/258 folio=0(65536) cur=36864 got em start=32768 len=32768
od-3457 btrfs_do_readpage: r/i=5/258 folio=0(65536) cur=40960 got em start=32768 len=32768
od-3457 btrfs_do_readpage: r/i=5/258 folio=0(65536) cur=45056 got em start=32768 len=32768
od-3457 btrfs_do_readpage: r/i=5/258 folio=0(65536) cur=49152 got em start=32768 len=32768
od-3457 btrfs_do_readpage: r/i=5/258 folio=0(65536) cur=53248 got em start=32768 len=32768
od-3457 btrfs_do_readpage: r/i=5/258 folio=0(65536) cur=57344 got em start=32768 len=32768
od-3457 btrfs_do_readpage: r/i=5/258 folio=0(65536) cur=61440 skip uptodate
od-3457 btrfs_submit_compressed_read: cb orig_bio: file off=0 len=61440
The function btrfs_submit_compressed_read() is only called at the end of
folio read. The compressed bio will only have an extent map of range [0,
32K), but the original bio passed in is for the whole 64K folio.
This will cause the decompression part to only fill the first 32K,
leaving the rest untouched (aka, filled with zero).
This incorrect compressed read merge leads to the above data corruption.
There were similar problems that happened in the past, commit 808f80b46790
("Btrfs: update fix for read corruption of compressed and shared
extents") is doing pretty much the same fix for readahead.
But that's back to 2015, where btrfs still only supports bs (block size)
== ps (page size) cases.
This means btrfs_do_readpage() only needs to handle a folio which
contains exactly one block.
Only btrfs_readahead() can lead to a read covering multiple blocks.
Thus only btrfs_readahead() passes a non-NULL @prev_em_start pointer.
With v5.15 kernel btrfs introduced bs < ps support. This breaks the above
assumption that a folio can only contain one block.
Now btrfs_read_folio() can also read multiple blocks in one go.
But btrfs_read_folio() doesn't pass a @prev_em_start pointer, thus the
existing bio force submission check will never be triggered.
In theory, this can also happen for btrfs with large folios, but since
large folio is still experimental, we don't need to bother it, thus only
bs < ps support is affected for now.
[FIX]
Instead of passing @prev_em_start to do the proper compressed extent
check, introduce one new member, btrfs_bio_ctrl::last_em_start, so that
the existing bio force submission logic will always be triggered.
CC: stable@vger.kernel.org # 5.15+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The compression level is meaningless for lzo, but before commit
3f093ccb95f30 ("btrfs: harden parsing of compression mount options"),
it was silently ignored if passed.
After that commit, passing a level with lzo fails to mount:
BTRFS error: unrecognized compression value lzo:1
It seems reasonable for users to expect that lzo would permit a numeric
level option, as all the other algos do, even though the kernel's
implementation of LZO currently only supports a single level. Because it
has always worked to pass a level, it seems likely to me that users in
the real world are relying on doing so.
This patch restores the old behavior, giving "lzo:N" the same semantics
as all of the other compression algos.
To be clear, silly variants like "lzo:one", "lzo:the_first_option", or
"lzo:armageddon" also used to work. This isn't meant to suggest that
any possible mis-interpretation of mount options that once worked must
continue to work forever. This is an exceptional case where it makes
sense to preserve compatibility, both because the mis-interpretation is
reasonable, and because nothing tangible is sacrificed.
Finally update btrfs_show_options() to ignore the level of LZO, as it
is only the default level without any extra meaning.
Fixes: 3f093ccb95f30 ("btrfs: harden parsing of compression mount options")
Reviewed-by: Daniel Vacek <neelx@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Calvin Owens <calvin@wbinvd.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The following workload on a squota enabled fs:
btrfs subvol create mnt/subvol
# ensure subvol extents get accounted
sync
btrfs qgroup create 1/1 mnt
btrfs qgroup assign mnt/subvol 1/1 mnt
btrfs qgroup delete mnt/subvol
# make the cleaner thread run
btrfs filesystem sync mnt
sleep 1
btrfs filesystem sync mnt
btrfs qgroup destroy 1/1 mnt
will fail with EBUSY. The reason is that 1/1 does the quick accounting
when we assign subvol to it, gaining its exclusive usage as excl and
excl_cmpr. But then when we delete subvol, the decrement happens via
record_squota_delta() which does not update excl_cmpr, as squotas does
not make any distinction between compressed and normal extents. Thus,
we increment excl_cmpr but never decrement it, and are unable to delete
1/1. The two possible fixes are to make squota always mirror excl and
excl_cmpr or to make the fast accounting separately track the plain and
cmpr numbers. The latter felt cleaner to me so that is what I opted for.
Fixes: 1e0e9d5771c3 ("btrfs: add helper for recording simple quota deltas")
CC: stable@vger.kernel.org # 6.12+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Fix a possible heap overflow in e1000_set_eeprom function by adding
input validation for the requested length of the change in the EEPROM.
In addition, change the variable type from int to size_t for better
code practices and rearrange declarations to RCT.
Cc: stable@vger.kernel.org
Fixes: bc7f75fa9788 ("[E1000E]: New pci-express e1000 driver (currently for ICH9 devices only)")
Co-developed-by: Mikael Wessel <post@mikaelkw.online>
Signed-off-by: Mikael Wessel <post@mikaelkw.online>
Signed-off-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
incorrectly used ixgbe_lp_map in loops intended to populate the
supported and advertised EEE linkmode bitmaps based on ixgbe_ls_map.
This results in incorrect bit setting and potential out-of-bounds
access, since ixgbe_lp_map and ixgbe_ls_map have different sizes
and purposes.
ixgbe_lp_map[i] -> ixgbe_ls_map[i]
Use ixgbe_ls_map for supported and advertised linkmodes, and keep
ixgbe_lp_map usage only for link partner (lp_advertised) mapping.
Fixes: 9356b6db9d05 ("net: ethernet: ixgbe: Convert EEE to use linkmodes")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
list_first_entry() never returns NULL - if the list is empty, it still
returns a pointer to an invalid object, leading to potential invalid
memory access when dereferenced.
Fix this by using list_first_entry_or_null instead of list_first_entry.
Fixes: e3219ce6a775 ("i40e: Add support for client interface for IWARP driver")
Signed-off-by: Zhen Ni <zhen.ni@easystack.cn>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The 'command' and 'netdev_ops' debugfs files are a legacy debugging
interface supported by the i40e driver since its early days by commit
02e9c290814c ("i40e: debugfs interface").
Both of these debugfs files provide a read handler which is mostly useless,
and which is implemented with questionable logic. They both use a static
256 byte buffer which is initialized to the empty string. In the case of
the 'command' file this buffer is literally never used and simply wastes
space. In the case of the 'netdev_ops' file, the last command written is
saved here.
On read, the files contents are presented as the name of the device
followed by a colon and then the contents of their respective static
buffer. For 'command' this will always be "<device>: ". For 'netdev_ops',
this will be "<device>: <last command written>". But note the buffer is
shared between all devices operated by this module. At best, it is mostly
meaningless information, and at worse it could be accessed simultaneously
as there doesn't appear to be any locking mechanism.
We have also recently received multiple reports for both read functions
about their use of snprintf and potential overflow that could result in
reading arbitrary kernel memory. For the 'command' file, this is definitely
impossible, since the static buffer is always zero and never written to.
For the 'netdev_ops' file, it does appear to be possible, if the user
carefully crafts the command input, it will be copied into the buffer,
which could be large enough to cause snprintf to truncate, which then
causes the copy_to_user to read beyond the length of the buffer allocated
by kzalloc.
A minimal fix would be to replace snprintf() with scnprintf() which would
cap the return to the number of bytes written, preventing an overflow. A
more involved fix would be to drop the mostly useless static buffers,
saving 512 bytes and modifying the read functions to stop needing those as
input.
Instead, lets just completely drop the read access to these files. These
are debug interfaces exposed as part of debugfs, and I don't believe that
dropping read access will break any script, as the provided output is
pretty useless. You can find the netdev name through other more standard
interfaces, and the 'netdev_ops' interface can easily result in garbage if
you issue simultaneous writes to multiple devices at once.
In order to properly remove the i40e_dbg_netdev_ops_buf, we need to
refactor its write function to avoid using the static buffer. Instead, use
the same logic as the i40e_dbg_command_write, with an allocated buffer.
Update the code to use this instead of the static buffer, and ensure we
free the buffer on exit. This fixes simultaneous writes to 'netdev_ops' on
multiple devices, and allows us to remove the now unused static buffer
along with removing the read access.
Fixes: 02e9c290814c ("i40e: debugfs interface")
Reported-by: Kunwu Chan <chentao@kylinos.cn>
Closes: https://lore.kernel.org/intel-wired-lan/20231208031950.47410-1-chentao@kylinos.cn/
Reported-by: Wang Haoran <haoranwangsec@gmail.com>
Closes: https://lore.kernel.org/all/CANZ3JQRRiOdtfQJoP9QM=6LS1Jto8PGBGw6y7-TL=BcnzHQn1Q@mail.gmail.com/
Reported-by: Amir Mohammad Jahangirzad <a.jahangirzad@gmail.com>
Closes: https://lore.kernel.org/all/20250722115017.206969-1-a.jahangirzad@gmail.com/
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Dawid Osuchowski <dawid.osuchowski@linux.intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Kunwu Chan <kunwu.chan@linux.dev>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
On control planes that allow changing the MAC address of the interface,
the driver must provide a MAC type to avoid errors such as:
idpf 0000:0a:00.0: Transaction failed (op 535)
idpf 0000:0a:00.0: Received invalid MAC filter payload (op 535) (len 0)
idpf 0000:0a:00.0: Transaction failed (op 536)
These errors occur during driver load or when changing the MAC via:
ip link set <iface> address <mac>
Add logic to set the MAC type when sending ADD/DEL (opcodes 535/536) to
the control plane. Since only one primary MAC is supported per vport, the
driver only needs to send an ADD opcode when setting it. Remove the old
address by calling __idpf_del_mac_filter(), which skips the message and
just clears the entry from the internal list. This avoids an error on DEL
as it attempts to remove an address already cleared by the preceding ADD
opcode.
Fixes: ce1b75d0635c ("idpf: add ptypes and MAC filter support")
Reported-by: Jian Liu <jianliu@redhat.com>
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Free the adev->id before auxiliary_device_uninit. The call to uninit
triggers the release callback, which frees the iadev memory containing the
adev. The previous flow results in a UAF during rmmod due to the adev->id
access.
[264939.604077] ==================================================================
[264939.604093] BUG: KASAN: slab-use-after-free in idpf_idc_deinit_core_aux_device+0xe4/0x100 [idpf]
[264939.604134] Read of size 4 at addr ff1100109eb6eaf8 by task rmmod/17842
...
[264939.604635] Allocated by task 17597:
[264939.604643] kasan_save_stack+0x20/0x40
[264939.604654] kasan_save_track+0x14/0x30
[264939.604663] __kasan_kmalloc+0x8f/0xa0
[264939.604672] idpf_idc_init_aux_core_dev+0x4bd/0xb60 [idpf]
[264939.604700] idpf_idc_init+0x55/0xd0 [idpf]
[264939.604726] process_one_work+0x658/0xfe0
[264939.604742] worker_thread+0x6e1/0xf10
[264939.604750] kthread+0x382/0x740
[264939.604762] ret_from_fork+0x23a/0x310
[264939.604772] ret_from_fork_asm+0x1a/0x30
[264939.604785] Freed by task 17842:
[264939.604790] kasan_save_stack+0x20/0x40
[264939.604799] kasan_save_track+0x14/0x30
[264939.604808] kasan_save_free_info+0x3b/0x60
[264939.604820] __kasan_slab_free+0x37/0x50
[264939.604830] kfree+0xf1/0x420
[264939.604840] device_release+0x9c/0x210
[264939.604850] kobject_put+0x17c/0x4b0
[264939.604860] idpf_idc_deinit_core_aux_device+0x4f/0x100 [idpf]
[264939.604886] idpf_vc_core_deinit+0xba/0x3a0 [idpf]
[264939.604915] idpf_remove+0xb0/0x7c0 [idpf]
[264939.604944] pci_device_remove+0xab/0x1e0
[264939.604955] device_release_driver_internal+0x371/0x530
[264939.604969] driver_detach+0xbf/0x180
[264939.604981] bus_remove_driver+0x11b/0x2a0
[264939.604991] pci_unregister_driver+0x2a/0x250
[264939.605005] __do_sys_delete_module.constprop.0+0x2eb/0x540
[264939.605014] do_syscall_64+0x64/0x2c0
[264939.605024] entry_SYSCALL_64_after_hwframe+0x76/0x7e
Fixes: f4312e6bfa2a ("idpf: implement core RDMA auxiliary dev create, init, and destroy")
Signed-off-by: Joshua Hay <joshua.a.hay@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Recent versions of the E810 firmware have support for an extra interrupt to
handle report of the "low latency" Tx timestamps coming from the
specialized low latency firmware interface. Instead of polling the
registers, software can wait until the low latency interrupt is fired.
This logic makes use of the Tx timestamp tracking structure, ice_ptp_tx, as
it uses the same "ready" bitmap to track which Tx timestamps complete.
Unfortunately, the ice_ll_ts_intr() function does not check if the
tracker is initialized before its first access. This results in NULL
dereference or use-after-free bugs similar to the issues fixed in the
ice_ptp_ts_irq() function.
Fix this by only checking the in_use bitmap (and other fields) if the
tracker is marked as initialized. The reset flow will clear the init field
under lock before it tears the tracker down, thus preventing any
use-after-free or NULL access.
Fixes: 82e71b226e0e ("ice: Enable SW interrupt from FW for LL TS")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The E810 device has support for a "low latency" firmware interface to
access and read the Tx timestamps. This interface does not use the standard
Tx timestamp logic, due to the latency overhead of proxying sideband
command requests over the firmware AdminQ.
The logic still makes use of the Tx timestamp tracking structure,
ice_ptp_tx, as it uses the same "ready" bitmap to track which Tx
timestamps complete.
Unfortunately, the ice_ptp_ts_irq() function does not check if the tracker
is initialized before its first access. This results in NULL dereference or
use-after-free bugs similar to the following:
[245977.278756] BUG: kernel NULL pointer dereference, address: 0000000000000000
[245977.278774] RIP: 0010:_find_first_bit+0x19/0x40
[245977.278796] Call Trace:
[245977.278809] ? ice_misc_intr+0x364/0x380 [ice]
This can occur if a Tx timestamp interrupt races with the driver reset
logic.
Fix this by only checking the in_use bitmap (and other fields) if the
tracker is marked as initialized. The reset flow will clear the init field
under lock before it tears the tracker down, thus preventing any
use-after-free or NULL access.
Fixes: f9472aaabd1f ("ice: Process TSYN IRQ in a separate function")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
