| Age | Commit message (Collapse) | Author |
|---|
|
Parallel concurrent writes to the same zram index result in leaked
zsmalloc handles. Schematically we can have something like this:
CPU0 CPU1
zram_slot_lock()
zs_free(handle)
zram_slot_lock()
zram_slot_lock()
zs_free(handle)
zram_slot_lock()
compress compress
handle = zs_malloc() handle = zs_malloc()
zram_slot_lock
zram_set_handle(handle)
zram_slot_lock
zram_slot_lock
zram_set_handle(handle)
zram_slot_lock
Either CPU0 or CPU1 zsmalloc handle will leak because zs_free() is done
too early. In fact, we need to reset zram entry right before we set its
new handle, all under the same slot lock scope.
Link: https://lkml.kernel.org/r/20250909045150.635345-1-senozhatsky@chromium.org
Fixes: 71268035f5d7 ("zram: free slot memory early during write")
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reported-by: Changhui Zhong <czhong@redhat.com>
Closes: https://lore.kernel.org/all/CAGVVp+UtpGoW5WEdEU7uVTtsSCjPN=ksN6EcvyypAtFDOUf30A@mail.gmail.com/
Tested-by: Changhui Zhong <czhong@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Minchan Kim <minchan@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
`netif_rx()` already increments `rx_dropped` core stat when it fails.
The driver was also updating `ndev->stats.rx_dropped` in the same path.
Since both are reported together via `ip -s -s` command, this resulted
in drops being counted twice in user-visible stats.
Keep the driver update on `if (unlikely(!skb))`, but skip it after
`netif_rx()` errors.
Fixes: caf586e5f23c ("net: add a core netdev->rx_dropped counter")
Signed-off-by: Yeounsu Moon <yyyynoom@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250913060135.35282-3-yyyynoom@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Matthieu Baerts says:
====================
mptcp: pm: nl: announce deny-join-id0 flag
During the connection establishment, a peer can tell the other one that
it cannot establish new subflows to the initial IP address and port by
setting the 'C' flag [1]. Doing so makes sense when the sender is behind
a strict NAT, operating behind a legacy Layer 4 load balancer, or using
anycast IP address for example.
When this 'C' flag is set, the path-managers must then not try to
establish new subflows to the other peer's initial IP address and port.
The in-kernel PM has access to this info, but the userspace PM didn't,
not letting the userspace daemon able to respect the RFC8684.
Here are a few fixes related to this 'C' flag (aka 'deny-join-id0'):
- Patch 1: add remote_deny_join_id0 info on passive connections. A fix
for v5.14.
- Patch 2: let the userspace PM daemon know about the deny_join_id0
attribute, so when set, it can avoid creating new subflows to the
initial IP address and port. A fix for v5.19.
- Patch 3: a validation for the previous commit.
- Patch 4: record the deny_join_id0 info when TFO is used. A fix for
v6.2.
- Patch 5: not related to deny-join-id0, but it fixes errors messages in
the sockopt selftests, not to create confusions. A fix for v6.5.
====================
Link: https://patch.msgid.link/20250912-net-mptcp-pm-uspace-deny_join_id0-v1-0-40171884ade8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch fixes several issues in the error reporting of the MPTCP sockopt
selftest:
1. Fix diff not printed: The error messages for counter mismatches had
the actual difference ('diff') as argument, but it was missing in the
format string. Displaying it makes the debugging easier.
2. Fix variable usage: The error check for 'mptcpi_bytes_acked' incorrectly
used 'ret2' (sent bytes) for both the expected value and the difference
calculation. It now correctly uses 'ret' (received bytes), which is the
expected value for bytes_acked.
3. Fix off-by-one in diff: The calculation for the 'mptcpi_rcv_delta' diff
was 's.mptcpi_rcv_delta - ret', which is off-by-one. It has been
corrected to 's.mptcpi_rcv_delta - (ret + 1)' to match the expected
value in the condition above it.
Fixes: 5dcff89e1455 ("selftests: mptcp: explicitly tests aggregate counters")
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250912-net-mptcp-pm-uspace-deny_join_id0-v1-5-40171884ade8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When TFO is used, the check to see if the 'C' flag (deny join id0) was
set was bypassed.
This flag can be set when TFO is used, so the check should also be done
when TFO is used.
Note that the set_fully_established label is also used when a 4th ACK is
received. In this case, deny_join_id0 will not be set.
Fixes: dfc8d0603033 ("mptcp: implement delayed seq generation for passive fastopen")
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250912-net-mptcp-pm-uspace-deny_join_id0-v1-4-40171884ade8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The previous commit adds the MPTCP_PM_EV_FLAG_DENY_JOIN_ID0 flag. Make
sure it is correctly announced by the other peer when it has been
received.
pm_nl_ctl will now display 'deny_join_id0:1' when monitoring the events,
and when this flag was set by the other peer.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: 702c2f646d42 ("mptcp: netlink: allow userspace-driven subflow establishment")
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250912-net-mptcp-pm-uspace-deny_join_id0-v1-3-40171884ade8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
During the connection establishment, a peer can tell the other one that
it cannot establish new subflows to the initial IP address and port by
setting the 'C' flag [1]. Doing so makes sense when the sender is behind
a strict NAT, operating behind a legacy Layer 4 load balancer, or using
anycast IP address for example.
When this 'C' flag is set, the path-managers must then not try to
establish new subflows to the other peer's initial IP address and port.
The in-kernel PM has access to this info, but the userspace PM didn't.
The RFC8684 [1] is strict about that:
(...) therefore the receiver MUST NOT try to open any additional
subflows toward this address and port.
So it is important to tell the userspace about that as it is responsible
for the respect of this flag.
When a new connection is created and established, the Netlink events
now contain the existing but not currently used 'flags' attribute. When
MPTCP_PM_EV_FLAG_DENY_JOIN_ID0 is set, it means no other subflows
to the initial IP address and port -- info that are also part of the
event -- can be established.
Link: https://datatracker.ietf.org/doc/html/rfc8684#section-3.1-20.6 [1]
Fixes: 702c2f646d42 ("mptcp: netlink: allow userspace-driven subflow establishment")
Reported-by: Marek Majkowski <marek@cloudflare.com>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/532
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250912-net-mptcp-pm-uspace-deny_join_id0-v1-2-40171884ade8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When a SYN containing the 'C' flag (deny join id0) was received, this
piece of information was not propagated to the path-manager.
Even if this flag is mainly set on the server side, a client can also
tell the server it cannot try to establish new subflows to the client's
initial IP address and port. The server's PM should then record such
info when received, and before sending events about the new connection.
Fixes: df377be38725 ("mptcp: add deny_join_id0 in mptcp_options_received")
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250912-net-mptcp-pm-uspace-deny_join_id0-v1-1-40171884ade8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Matthieu Baerts says:
====================
selftests: mptcp: avoid spurious errors on TCP disconnect
This series should fix the recent instabilities seen by MPTCP and NIPA
CIs where the 'mptcp_connect.sh' tests fail regularly when running the
'disconnect' subtests with "plain" TCP sockets, e.g.
# INFO: disconnect
# 63 ns1 MPTCP -> ns1 (10.0.1.1:20001 ) MPTCP (duration 996ms) [ OK ]
# 64 ns1 MPTCP -> ns1 (10.0.1.1:20002 ) TCP (duration 851ms) [ OK ]
# 65 ns1 TCP -> ns1 (10.0.1.1:20003 ) MPTCP Unexpected revents: POLLERR/POLLNVAL(19)
# (duration 896ms) [FAIL] file received by server does not match (in, out):
# -rw-r--r-- 1 root root 11112852 Aug 19 09:16 /tmp/tmp.hlJe5DoMoq.disconnect
# Trailing bytes are:
# /{ga 6@=#.8:-rw------- 1 root root 10085368 Aug 19 09:16 /tmp/tmp.blClunilxx
# Trailing bytes are:
# /{ga 6@=#.8:66 ns1 MPTCP -> ns1 (dead:beef:1::1:20004) MPTCP (duration 987ms) [ OK ]
# 67 ns1 MPTCP -> ns1 (dead:beef:1::1:20005) TCP (duration 911ms) [ OK ]
# 68 ns1 TCP -> ns1 (dead:beef:1::1:20006) MPTCP (duration 980ms) [ OK ]
# [FAIL] Tests of the full disconnection have failed
These issues started to be visible after some behavioural changes in
TCP, where too quick re-connections after a shutdown() can now be more
easily rejected. Patch 3 modifies the selftests to wait, but this
resolution revealed an issue in MPTCP which is fixed by patch 1 (a fix
for v5.9 kernel).
Patches 2 and 4 improve some errors reported by the selftests, and patch
5 helps with the debugging of such issues.
====================
Link: https://patch.msgid.link/20250912-net-mptcp-fix-sft-connect-v1-0-d40e77cbbf02@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
To be able to find which capture files have been produced after several
runs.
This prefix was not printed anywhere before.
While at it, always use the same prefix by taking info from ns1, instead
of "$connector_ns", which is sometimes ns1, sometimes ns2 in the
subtests.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250912-net-mptcp-fix-sft-connect-v1-5-d40e77cbbf02@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This is better than printing random bytes in the terminal.
Note that Jakub suggested 'hexdump', but Mat found out this tool is not
often installed by default. 'od' can do a similar job, and it is in the
POSIX specs and available in coreutils, so it should be on more systems.
While at it, display a few more bytes, just to fill in the two lines.
And no need to display the 3rd only line showing the next number of
bytes: 0000040.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Suggested-by: Mat Martineau <martineau@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250912-net-mptcp-fix-sft-connect-v1-4-d40e77cbbf02@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The disconnect test-case, with 'plain' TCP sockets generates spurious
errors, e.g.
07 ns1 TCP -> ns1 (dead:beef:1::1:10006) MPTCP
read: Connection reset by peer
read: Connection reset by peer
(duration 155ms) [FAIL] client exit code 3, server 3
netns ns1-FloSdv (listener) socket stat for 10006:
TcpActiveOpens 2 0.0
TcpPassiveOpens 2 0.0
TcpEstabResets 2 0.0
TcpInSegs 274 0.0
TcpOutSegs 276 0.0
TcpOutRsts 3 0.0
TcpExtPruneCalled 2 0.0
TcpExtRcvPruned 1 0.0
TcpExtTCPPureAcks 104 0.0
TcpExtTCPRcvCollapsed 2 0.0
TcpExtTCPBacklogCoalesce 42 0.0
TcpExtTCPRcvCoalesce 43 0.0
TcpExtTCPChallengeACK 1 0.0
TcpExtTCPFromZeroWindowAdv 42 0.0
TcpExtTCPToZeroWindowAdv 41 0.0
TcpExtTCPWantZeroWindowAdv 13 0.0
TcpExtTCPOrigDataSent 164 0.0
TcpExtTCPDelivered 165 0.0
TcpExtTCPRcvQDrop 1 0.0
In the failing scenarios (TCP -> MPTCP), the involved sockets are
actually plain TCP ones, as fallbacks for passive sockets at 2WHS time
cause the MPTCP listeners to actually create 'plain' TCP sockets.
Similar to commit 218cc166321f ("selftests: mptcp: avoid spurious errors
on disconnect"), the root cause is in the user-space bits: the test
program tries to disconnect as soon as all the pending data has been
spooled, generating an RST. If such option reaches the peer before the
connection has reached the closed status, the TCP socket will report an
error to the user-space, as per protocol specification, causing the
above failure. Note that it looks like this issue got more visible since
the "tcp: receiver changes" series from commit 06baf9bfa6ca ("Merge
branch 'tcp-receiver-changes'").
Address the issue by explicitly waiting for the TCP sockets (-t) to
reach a closed status before performing the disconnect. More precisely,
the test program now waits for plain TCP sockets or TCP subflows in
addition to the MPTCP sockets that were already monitored.
While at it, use 'ss' with '-n' to avoid resolving service names, which
is not needed here.
Fixes: 218cc166321f ("selftests: mptcp: avoid spurious errors on disconnect")
Cc: stable@vger.kernel.org
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250912-net-mptcp-fix-sft-connect-v1-3-d40e77cbbf02@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
IO errors were correctly printed to stderr, and propagated up to the
main loop for the server side, but the returned value was ignored. As a
consequence, the program for the listener side was no longer exiting
with an error code in case of IO issues.
Because of that, some issues might not have been seen. But very likely,
most issues either had an effect on the client side, or the file
transfer was not the expected one, e.g. the connection got reset before
the end. Still, it is better to fix this.
The main consequence of this issue is the error that was reported by the
selftests: the received and sent files were different, and the MIB
counters were not printed. Also, when such errors happened during the
'disconnect' tests, the program tried to continue until the timeout.
Now when an IO error is detected, the program exits directly with an
error.
Fixes: 05be5e273c84 ("selftests: mptcp: add disconnect tests")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250912-net-mptcp-fix-sft-connect-v1-2-d40e77cbbf02@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When the MPTCP DATA FIN have been ACKed, there is no more MPTCP related
metadata to exchange, and all subflows can be safely shutdown.
Before this patch, the subflows were actually terminated at 'close()'
time. That's certainly fine most of the time, but not when the userspace
'shutdown()' a connection, without close()ing it. When doing so, the
subflows were staying in LAST_ACK state on one side -- and consequently
in FIN_WAIT2 on the other side -- until the 'close()' of the MPTCP
socket.
Now, when the DATA FIN have been ACKed, all subflows are shutdown. A
consequence of this is that the TCP 'FIN' flag can be set earlier now,
but the end result is the same. This affects the packetdrill tests
looking at the end of the MPTCP connections, but for a good reason.
Note that tcp_shutdown() will check the subflow state, so no need to do
that again before calling it.
Fixes: 3721b9b64676 ("mptcp: Track received DATA_FIN sequence number and add related helpers")
Cc: stable@vger.kernel.org
Fixes: 16a9a9da1723 ("mptcp: Add helper to process acks of DATA_FIN")
Reviewed-by: Mat Martineau <martineau@kernel.org>
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250912-net-mptcp-fix-sft-connect-v1-1-d40e77cbbf02@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a test to check each value of bond fail_over_mac option.
Also fix a minor garp_test print issue.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20250910024336.400253-2-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
After commit 5c3bf6cba791 ("bonding: assign random address if device
address is same as bond"), bonding will erroneously randomize the MAC
address of the first interface added to the bond if fail_over_mac =
follow.
Correct this by additionally testing for the bond being empty before
randomizing the MAC.
Fixes: 5c3bf6cba791 ("bonding: assign random address if device address is same as bond")
Reported-by: Qiuling Ren <qren@redhat.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20250910024336.400253-1-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We need to increment i_fastreg_wrs before we bail out from
rds_ib_post_reg_frmr().
We have a fixed budget of how many FRWR operations that can be
outstanding using the dedicated QP used for memory registrations and
de-registrations. This budget is enforced by the atomic_t
i_fastreg_wrs. If we bail out early in rds_ib_post_reg_frmr(), we will
"leak" the possibility of posting an FRWR operation, and if that
accumulates, no FRWR operation can be carried out.
Fixes: 1659185fb4d0 ("RDS: IB: Support Fastreg MR (FRMR) memory registration mode")
Fixes: 3a2886cca703 ("net/rds: Keep track of and wait for FRWR segments in use upon shutdown")
Cc: stable@vger.kernel.org
Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Link: https://patch.msgid.link/20250911133336.451212-1-haakon.bugge@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
__maps__fixup_overlap_and_insert may split or directly insert a map,
when doing this the map may need to have a kmap set up for the sake of
the kmaps. The missing kmap set up fails the check_invariants test in
maps, later "Internal error" reports from map__kmap and ultimately
causes segfaults.
Similar fixes were added in commit e0e4e0b8b7fa ("perf maps: Add
missing map__set_kmap_maps() when replacing a kernel map") and commit
25d9c0301d36 ("perf maps: Set the kmaps for newly created/added kernel
maps") but they missed cases. To try to reduce the risk of this,
update the kmap directly following any manual insert. This identified
another problem in maps__copy_from.
Fixes: e0e4e0b8b7fa ("perf maps: Add missing map__set_kmap_maps() when replacing a kernel map")
Fixes: 25d9c0301d36 ("perf maps: Set the kmaps for newly created/added kernel maps")
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply fixes from Sebastian Reichel:
- bq27xxx: avoid spamming the log for missing bq27000 battery
* tag 'for-v6.17-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply:
power: supply: bq27xxx: restrict no-battery detection to bq27000
power: supply: bq27xxx: fix error return in case of no bq27000 hdq battery
|
|
In my previous fix for this condition, I erroneously listed 9000
instead of 7000 family, when 7000/8000 were already using iwlmvm.
Thus the condition ended up wrong, causing the issue I had fixed
for older devices to suddenly appear on 7000/8000 family devices.
Correct the condition accordingly.
Reported-by: David Wang <00107082@163.com>
Closes: https://lore.kernel.org/r/20250909165811.10729-1-00107082@163.com/
Fixes: 586e3cb33ba6 ("wifi: iwlwifi: fix byte count table for old devices")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250915102743.777aaafbcc6c.I84404edfdfbf400501f6fb06def5b86c501da198@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
When sorting the block group list for reclaim we are using a block group's
used bytes counter without taking the block group's spinlock, so we can
race with a concurrent task updating it (at btrfs_update_block_group()),
which makes tools like KCSAN unhappy and report a race.
Since the sorting is not strictly needed from a functional perspective
and such races should rarely cause any ordering changes (only load/store
tearing could cause them), not to mention that after the sorting the
ordering may no longer be accurate due to concurrent allocations and
deallocations of extents in a block group, annotate the accesses to the
used counter with data_race() to silence KCSAN and similar tools.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
btrfs_init_file_extent_tree() uses S_ISREG() to determine if the file is
a regular file. In the beginning of btrfs_read_locked_inode(), the i_mode
hasn't been read from inode item, then file_extent_tree won't be used at
all in volumes without NO_HOLES.
Fix this by calling btrfs_init_file_extent_tree() after i_mode is
initialized in btrfs_read_locked_inode().
Fixes: 3d7db6e8bd22e6 ("btrfs: don't allocate file extent tree for non regular files")
CC: stable@vger.kernel.org # 6.12+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: austinchang <austinchang@synology.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
When moving a block-group to the dedicated data relocation space-info in
btrfs_zoned_reserve_data_reloc_bg() it is asserted that the newly
created block group for data relocation does not contain any
zone_unusable bytes.
But on disks with zone_capacity < zone_size, the difference between
zone_size and zone_capacity is accounted as zone_unusable.
Instead of asserting that the block-group does not contain any
zone_unusable bytes, remove them from the block-groups total size.
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Link: https://lore.kernel.org/linux-block/CAHj4cs8-cS2E+-xQ-d2Bj6vMJZ+CwT_cbdWBTju4BV35LsvEYw@mail.gmail.com/
Fixes: daa0fde322350 ("btrfs: zoned: fix data relocation block group reservation")
Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The offset for an extref item's key is not the object ID of the parent
dir, otherwise we would not need the extref item and would use plain ref
items. Instead the offset is the result of a hash computation that uses
the object ID of the parent dir and the name associated to the entry.
So fix this by setting the key offset at replay_one_name() to be the
result of calling btrfs_extref_hash().
Fixes: 725af92a6251 ("btrfs: Open-code name_in_log_ref in replay_one_name")
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
This is inspired by the check for data_offset + data_length.
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Cc: stable@vger.kernel.org
Fixes: 2ea086e35c3d ("ksmbd: add buffer validation for smb direct")
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
smb_direct_data_transfer
If data_offset and data_length of smb_direct_data_transfer struct are
invalid, out of bounds issue could happen.
This patch validate data_offset and data_length field in recv_done.
Cc: stable@vger.kernel.org
Fixes: 2ea086e35c3d ("ksmbd: add buffer validation for smb direct")
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Reported-by: Luigino Camastra, Aisle Research <luigino.camastra@aisle.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
We should not use more sges for ib_post_send() than we told the rdma
device in rdma_create_qp()!
Otherwise ib_post_send() will return -EINVAL, so we disconnect the
connection. Or with the current siw.ko we'll get 0 from ib_post_send(),
but will never ever get a completion for the request. I've already sent a
fix for siw.ko...
So we need to make sure smb_direct_writev() limits the number of vectors
we pass to individual smb_direct_post_send_data() calls, so that we
don't go over the queue pair limits.
Commit 621433b7e25d ("ksmbd: smbd: relax the count of sges required")
was very strange and I guess only needed because
SMB_DIRECT_MAX_SEND_SGES was 8 at that time. It basically removed the
check that the rdma device is able to handle the number of sges we try
to use.
While the real problem was added by commit ddbdc861e37c ("ksmbd: smbd:
introduce read/write credits for RDMA read/write") as it used the
minumun of device->attrs.max_send_sge and device->attrs.max_sge_rd, with
the problem that device->attrs.max_sge_rd is always 1 for iWarp. And
that limitation should only apply to RDMA Read operations. For now we
keep that limitation for RDMA Write operations too, fixing that is a
task for another day as it's not really required a bug fix.
Commit 2b4eeeaa9061 ("ksmbd: decrease the number of SMB3 smbdirect
server SGEs") lowered SMB_DIRECT_MAX_SEND_SGES to 6, which is also used
by our client code. And that client code enforces
device->attrs.max_send_sge >= 6 since commit d2e81f92e5b7 ("Decrease the
number of SMB3 smbdirect client SGEs") and (briefly looking) only the
i40w driver provides only 3, see I40IW_MAX_WQ_FRAGMENT_COUNT. But
currently we'd require 4 anyway, so that would not work anyway, but now
it fails early.
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Hyunchul Lee <hyc.lee@gmail.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Cc: linux-rdma@vger.kernel.org
Fixes: 0626e6641f6b ("cifsd: add server handler for central processing and tranport layers")
Fixes: ddbdc861e37c ("ksmbd: smbd: introduce read/write credits for RDMA read/write")
Fixes: 621433b7e25d ("ksmbd: smbd: relax the count of sges required")
Fixes: 2b4eeeaa9061 ("ksmbd: decrease the number of SMB3 smbdirect server SGEs")
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Ilya Maximets says:
====================
net: dst_metadata: fix DF flag extraction on tunnel rx
Two patches here, first fixes the issue where tunnel core doesn't
actually extract DF bit from the outer IP header, even though both
OVS and TC flower allow matching on it. More details in the commit
message.
The second is a selftest for openvswitch that reproduces the issue,
but also just adds some basic coverage for the tunnel metadata
extraction and related openvswitch uAPI.
====================
Link: https://patch.msgid.link/20250909165440.229890-1-i.maximets@ovn.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This test ensures that upon receiving decapsulated packets from a
tunnel interface in openvswitch, the tunnel metadata fields are
properly populated. This partially covers interoperability of the
kernel tunnel ports and openvswitch tunnels (LWT) and parsing and
formatting of the tunnel metadata fields of the openvswitch netlink
uAPI. Doing so, this test also ensures that fields and flags are
properly extracted during decapsulation by the tunnel core code,
serving as a regression test for the previously fixed issue with the
DF bit not being extracted from the outer IP header.
The ovs-dpctl.py script already supports all that is necessary for
the tunnel ports for this test, so we only need to adjust the
ovs_add_if() function to pass the '-t' port type argument in order
to be able to create tunnel ports in the openvswitch datapath.
Reviewed-by: Aaron Conole <aconole@redhat.com>
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Link: https://patch.msgid.link/20250909165440.229890-3-i.maximets@ovn.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Both OVS and TC flower allow extracting and matching on the DF bit of
the outer IP header via OVS_TUNNEL_KEY_ATTR_DONT_FRAGMENT in the
OVS_KEY_ATTR_TUNNEL and TCA_FLOWER_KEY_FLAGS_TUNNEL_DONT_FRAGMENT in
the TCA_FLOWER_KEY_ENC_FLAGS respectively. Flow dissector extracts
this information as FLOW_DIS_F_TUNNEL_DONT_FRAGMENT from the tunnel
info key.
However, the IP_TUNNEL_DONT_FRAGMENT_BIT in the tunnel key is never
actually set, because the tunneling code doesn't actually extract it
from the IP header. OAM and CRIT_OPT are extracted by the tunnel
implementation code, same code also sets the KEY flag, if present.
UDP tunnel core takes care of setting the CSUM flag if the checksum
is present in the UDP header, but the DONT_FRAGMENT is not handled at
any layer.
Fix that by checking the bit and setting the corresponding flag while
populating the tunnel info in the IP layer where it belongs.
Not using __assign_bit as we don't really need to clear the bit in a
just initialized field. It also doesn't seem like using __assign_bit
will make the code look better.
Clearly, users didn't rely on this functionality for anything very
important until now. The reason why this doesn't break OVS logic is
that it only matches on what kernel previously parsed out and if kernel
consistently reports this bit as zero, OVS will only match on it to be
zero, which sort of works. But it is still a bug that the uAPI reports
and allows matching on the field that is not actually checked in the
packet. And this is causing misleading -df reporting in OVS datapath
flows, while the tunnel traffic actually has the bit set in most cases.
This may also cause issues if a hardware properly implements support
for tunnel flag matching as it will disagree with the implementation
in a software path of TC flower.
Fixes: 7d5437c709de ("openvswitch: Add tunneling interface.")
Fixes: 1d17568e74de ("net/sched: cls_flower: add support for matching tunnel control flags")
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250909165440.229890-2-i.maximets@ovn.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In the protection override dump path, the firmware can return far too
many GRC elements, resulting in attempting to write past the end of the
previously-kmalloc'ed dump buffer.
This will result in a kernel panic with reason:
BUG: unable to handle kernel paging request at ADDRESS
where "ADDRESS" is just past the end of the protection override dump
buffer. The start address of the buffer is:
p_hwfn->cdev->dbg_features[DBG_FEATURE_PROTECTION_OVERRIDE].dump_buf
and the size of the buffer is buf_size in the same data structure.
The panic can be arrived at from either the qede Ethernet driver path:
[exception RIP: qed_grc_dump_addr_range+0x108]
qed_protection_override_dump at ffffffffc02662ed [qed]
qed_dbg_protection_override_dump at ffffffffc0267792 [qed]
qed_dbg_feature at ffffffffc026aa8f [qed]
qed_dbg_all_data at ffffffffc026b211 [qed]
qed_fw_fatal_reporter_dump at ffffffffc027298a [qed]
devlink_health_do_dump at ffffffff82497f61
devlink_health_report at ffffffff8249cf29
qed_report_fatal_error at ffffffffc0272baf [qed]
qede_sp_task at ffffffffc045ed32 [qede]
process_one_work at ffffffff81d19783
or the qedf storage driver path:
[exception RIP: qed_grc_dump_addr_range+0x108]
qed_protection_override_dump at ffffffffc068b2ed [qed]
qed_dbg_protection_override_dump at ffffffffc068c792 [qed]
qed_dbg_feature at ffffffffc068fa8f [qed]
qed_dbg_all_data at ffffffffc0690211 [qed]
qed_fw_fatal_reporter_dump at ffffffffc069798a [qed]
devlink_health_do_dump at ffffffff8aa95e51
devlink_health_report at ffffffff8aa9ae19
qed_report_fatal_error at ffffffffc0697baf [qed]
qed_hw_err_notify at ffffffffc06d32d7 [qed]
qed_spq_post at ffffffffc06b1011 [qed]
qed_fcoe_destroy_conn at ffffffffc06b2e91 [qed]
qedf_cleanup_fcport at ffffffffc05e7597 [qedf]
qedf_rport_event_handler at ffffffffc05e7bf7 [qedf]
fc_rport_work at ffffffffc02da715 [libfc]
process_one_work at ffffffff8a319663
Resolve this by clamping the firmware's return value to the maximum
number of legal elements the firmware should return.
Fixes: d52c89f120de8 ("qed*: Utilize FW 8.37.2.0")
Signed-off-by: Jamie Bainbridge <jamie.bainbridge@gmail.com>
Link: https://patch.msgid.link/f8e1182934aa274c18d0682a12dbaf347595469c.1757485536.git.jamie.bainbridge@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull generic phy driver fixes from Vinod Koul:
- Qualcomm repeater override properties, qmp pcie bindings fix for
clocks and initialization sequence for firmware power down case
- Marvell comphy bindings clock and child node constraints
- Tegra xusb device reference leaks fix
- TI omap usb device ref leak on unbind and RGMII IS settings fix
* tag 'phy-fix-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy:
phy: qcom: qmp-pcie: Fix PHY initialization when powered down by firmware
phy: ti: gmii-sel: Always write the RGMII ID setting
dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Update pcie phy bindings
phy: ti-pipe3: fix device leak at unbind
phy: ti: omap-usb2: fix device leak at unbind
phy: tegra: xusb: fix device and OF node leak at probe
dt-bindings: phy: marvell,comphy-cp110: Fix clock and child node constraints
phy: qualcomm: phy-qcom-eusb2-repeater: fix override properties
|
|
Add a helper to validate the VF ID and use it in the VF ndo ops to
prevent accessing out-of-range entries.
Without this check, users can run commands such as:
# ip link show dev enp135s0
2: enp135s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT group default qlen 1000
link/ether 00:00:00:01:01:00 brd ff:ff:ff:ff:ff:ff
vf 0 link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff, spoof checking on, link-state enable, trust off
vf 1 link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff, spoof checking on, link-state enable, trust off
# ip link set dev enp135s0 vf 4 mac 00:00:00:00:00:14
# echo $?
0
even though VF 4 does not exist, which results in silent success instead
of returning an error.
Fixes: 8a241ef9b9b8 ("octeon_ep: add ndo ops for VFs in PF driver")
Signed-off-by: Kamal Heib <kheib@redhat.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250911223610.1803144-1-kheib@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine fixes from Vinod Koul:
- Intel idxd fixes for idxd_free() handling, refcount underflow on
module unload, double free in idxd_setup_wqs()
- Qualcomm bam dma missing properties and handing for channels with ees
- dw device reference leak in rzn1_dmamux_route_allocate()
* tag 'dmaengine-fix-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
dmaengine: dw: dmamux: Fix device reference leak in rzn1_dmamux_route_allocate
dmaengine: ti: edma: Fix memory allocation size for queue_priority_map
dmaengine: idxd: Fix double free in idxd_setup_wqs()
dmaengine: idxd: Fix refcount underflow on module unload
dmaengine: idxd: Remove improper idxd_free
dmaengine: qcom: bam_dma: Fix DT error handling for num-channels/ees
dt-bindings: dma: qcom: bam-dma: Add missing required properties
|
|
Fix the following Smatch static checker warning:
net/rxrpc/rxgk_app.c:65 rxgk_yfs_decode_ticket()
warn: untrusted unsigned subtract. 'ticket_len - 10 * 4'
by prechecking the length of what we're trying to extract in two places in
the token and decoding for a response packet.
Also use sizeof() on the struct we're extracting rather specifying the size
numerically to be consistent with the other related statements.
Fixes: 9d1d2b59341f ("rxrpc: rxgk: Implement the yfs-rxgk security class (GSSAPI)")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lists.infradead.org/pipermail/linux-afs/2025-September/010135.html
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/2039268.1757631977@warthog.procyon.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
rxgk_verify_packet_integrity() may get more errors than just -EPROTO from
rxgk_verify_mic_skb(). Pretty much anything other than -ENOMEM constitutes
an unrecoverable error. In the case of -ENOMEM, we can just drop the
packet and wait for a retransmission.
Similar happens with rxgk_decrypt_skb() and its callers.
Fix rxgk_decrypt_skb() or rxgk_verify_mic_skb() to return a greater variety
of abort codes and fix their callers to abort the connection on any error
apart from -ENOMEM.
Also preclear the variables used to hold the abort code returned from
rxgk_decrypt_skb() or rxgk_verify_mic_skb() to eliminate uninitialised
variable warnings.
Fixes: 9d1d2b59341f ("rxrpc: rxgk: Implement the yfs-rxgk security class (GSSAPI)")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lists.infradead.org/pipermail/linux-afs/2025-April/009739.html
Closes: https://lists.infradead.org/pipermail/linux-afs/2025-April/009740.html
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/2038804.1757631496@warthog.procyon.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The DPLL_CLOCK_QUALITY_LEVEL_ITU_OPT1_EPRC is not reported via netlink
due to bug in dpll_msg_add_clock_quality_level(). The usage of
DPLL_CLOCK_QUALITY_LEVEL_MAX for both DECLARE_BITMAP() and
for_each_set_bit() is not correct because these macros requires bitmap
size and not the highest valid bit in the bitmap.
Use correct bitmap size to fix this issue.
Fixes: a1afb959add1 ("dpll: add clock quality level attribute and op")
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Link: https://patch.msgid.link/20250912093331.862333-1-ivecera@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
A NULL pointer dereference can occur in tcp_ao_finish_connect() during a
connect() system call on a socket with a TCP-AO key added and TCP_REPAIR
enabled.
The function is called with skb being NULL and attempts to dereference it
on tcp_hdr(skb)->seq without a prior skb validation.
Fix this by checking if skb is NULL before dereferencing it.
The commentary is taken from bpf_skops_established(), which is also called
in the same flow. Unlike the function being patched,
bpf_skops_established() validates the skb before dereferencing it.
int main(void){
struct sockaddr_in sockaddr;
struct tcp_ao_add tcp_ao;
int sk;
int one = 1;
memset(&sockaddr,'\0',sizeof(sockaddr));
memset(&tcp_ao,'\0',sizeof(tcp_ao));
sk = socket(AF_INET, SOCK_STREAM, IPPROTO_TCP);
sockaddr.sin_family = AF_INET;
memcpy(tcp_ao.alg_name,"cmac(aes128)",12);
memcpy(tcp_ao.key,"ABCDEFGHABCDEFGH",16);
tcp_ao.keylen = 16;
memcpy(&tcp_ao.addr,&sockaddr,sizeof(sockaddr));
setsockopt(sk, IPPROTO_TCP, TCP_AO_ADD_KEY, &tcp_ao,
sizeof(tcp_ao));
setsockopt(sk, IPPROTO_TCP, TCP_REPAIR, &one, sizeof(one));
sockaddr.sin_family = AF_INET;
sockaddr.sin_port = htobe16(123);
inet_aton("127.0.0.1", &sockaddr.sin_addr);
connect(sk,(struct sockaddr *)&sockaddr,sizeof(sockaddr));
return 0;
}
$ gcc tcp-ao-nullptr.c -o tcp-ao-nullptr -Wall
$ unshare -Urn
BUG: kernel NULL pointer dereference, address: 00000000000000b6
PGD 1f648d067 P4D 1f648d067 PUD 1982e8067 PMD 0
Oops: Oops: 0000 [#1] SMP NOPTI
Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop
Reference Platform, BIOS 6.00 11/12/2020
RIP: 0010:tcp_ao_finish_connect (net/ipv4/tcp_ao.c:1182)
Fixes: 7c2ffaf21bd6 ("net/tcp: Calculate TCP-AO traffic keys")
Signed-off-by: Anderson Nascimento <anderson@allelesecurity.com>
Reviewed-by: Dmitry Safonov <0x7f454c46@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250911230743.2551-3-anderson@allelesecurity.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here are some small tty and serial driver fixes for 6.17-rc6 that
resolve some reported problems. Included in here are:
- 8250 driver dt bindings fixes
- broadcom serial driver binding fixes
- hvc_console bugfix
- xilinx serial driver bugfix
- sc16is7xx serial driver bugfix
All of these have been in linux-next for the past week with no
reported issues"
* tag 'tty-6.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: xilinx_uartps: read reg size from DTS
tty: hvc_console: Call hvc_kick in hvc_write unconditionally
dt-bindings: serial: 8250: allow "main" and "uart" as clock names
dt-bindings: serial: 8250: move a constraint
dt-bindings: serial: brcm,bcm7271-uart: Constrain clocks
serial: sc16is7xx: fix bug in flow control levels init
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB driver fixes and new device ids for 6.17-rc6.
Included in here are:
- new usb-serial driver device ids
- dummy-hcd locking bugfix for rt-enabled systems (which is crazy,
but people have odd testing requirements at times...)
- xhci driver bugfixes for reported issues
- typec driver bugfix
- midi2 gadget driver bugfixes
- usb core sysfs file regression fix from -rc1
All of these, except for the last usb sysfs file fix, have been in
linux-next with no reported issues. The sysfs fix was added to the
tree on Friday, and is "obviously correct" and should not have any
problems either, it just didn't have any time for linux-next to pick
up (0-day had no problems with it)"
* tag 'usb-6.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: core: remove the move buf action
usb: gadget: midi2: Fix MIDI2 IN EP max packet size
usb: gadget: midi2: Fix missing UMP group attributes initialization
usb: typec: tcpm: properly deliver cable vdms to altmode drivers
USB: gadget: dummy-hcd: Fix locking bug in RT-enabled kernels
xhci: fix memory leak regression when freeing xhci vdev devices depth first
xhci: dbc: Fix full DbC transfer ring after several reconnects
xhci: dbc: decouple endpoint allocation from initialization
USB: serial: option: add Telit Cinterion LE910C4-WWX new compositions
USB: serial: option: add Telit Cinterion FN990A w/audio compositions
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"Fix a CPU topology parsing bug on AMD guests, and address
a lockdep warning in the resctrl filesystem"
* tag 'x86-urgent-2025-09-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
fs/resctrl: Eliminate false positive lockdep warning when reading SNC counters
x86/cpu/topology: Always try cpu_parse_topology_ext() on AMD/Hygon
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fix from Ingo Molnar:
"Fix a lost-timeout CPU hotplug bug in the hrtimer code, which can
trigger with certain hardware configs and regular HZ"
* tag 'timers-urgent-2025-09-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
hrtimers: Unconditionally update target CPU base after offline timer migration
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- a quirk to i8042 for yet another TUXEDO laptop
- a fix to mtk-pmic-keys driver to properly handle MT6359
- a fix to iqs7222 driver to only enable proximity interrupt
if it is mapped to a key or a switch event
- an update to xpad controller driver to recognize Flydigi Apex 5
controller
- an update to maintainers file to drop bounding entry for Melfas
touch controller
* tag 'input-for-v6.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
MAINTAINERS: Input: Drop melfas-mip4 section
Input: mtk-pmic-keys - MT6359 has a specific release irq
Input: i8042 - add TUXEDO InfinityBook Pro Gen10 AMD to i8042 quirk table
Input: iqs7222 - avoid enabling unused interrupts
Input: xpad - add support for Flydigi Apex 5
|
|
Emails to the sole melfas-mip4 driver maintainer bounce:
550 <jeesw@melfas.com> No such user here (connected from melfas.com)
so clearly this is not a supported driver anymore.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250910142526.105286-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs fixes from Gao Xiang:
- Fix invalid algorithm dereference in encoded extents
- Add missing dax_break_layout_final(), since recent FSDAX fixes
didn't cover EROFS
- Arrange long xattr name prefixes more properly
* tag 'erofs-for-6.17-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: fix long xattr name prefix placement
erofs: fix runtime warning on truncate_folio_batch_exceptionals()
erofs: fix invalid algorithm for encoded extents
|
|
When accessing one of the files under /sys/fs/nilfs2/features when
CONFIG_CFI_CLANG is enabled, there is a CFI violation:
CFI failure at kobj_attr_show+0x59/0x80 (target: nilfs_feature_revision_show+0x0/0x30; expected type: 0xfc392c4d)
...
Call Trace:
<TASK>
sysfs_kf_seq_show+0x2a6/0x390
? __cfi_kobj_attr_show+0x10/0x10
kernfs_seq_show+0x104/0x15b
seq_read_iter+0x580/0xe2b
...
When the kobject of the kset for /sys/fs/nilfs2 is initialized, its ktype
is set to kset_ktype, which has a ->sysfs_ops of kobj_sysfs_ops. When
nilfs_feature_attr_group is added to that kobject via
sysfs_create_group(), the kernfs_ops of each files is sysfs_file_kfops_rw,
which will call sysfs_kf_seq_show() when ->seq_show() is called.
sysfs_kf_seq_show() in turn calls kobj_attr_show() through
->sysfs_ops->show(). kobj_attr_show() casts the provided attribute out to
a 'struct kobj_attribute' via container_of() and calls ->show(), resulting
in the CFI violation since neither nilfs_feature_revision_show() nor
nilfs_feature_README_show() match the prototype of ->show() in 'struct
kobj_attribute'.
Resolve the CFI violation by adjusting the second parameter in
nilfs_feature_{revision,README}_show() from 'struct attribute' to 'struct
kobj_attribute' to match the expected prototype.
Link: https://lkml.kernel.org/r/20250906144410.22511-1-konishi.ryusuke@gmail.com
Fixes: aebe17f68444 ("nilfs2: add /sys/fs/nilfs2/features group")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202509021646.bc78d9ef-lkp@intel.com/
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Commit 964314344eab ("samples/damon/mtier: support boot time enable
setup") is somehow incompletely applying the origin patch [1]. It is
missing the part that avoids starting DAMON before module initialization.
Probably a mistake during a merge has happened. Fix it by applying the
missed part again.
Link: https://lkml.kernel.org/r/20250909022238.2989-4-sj@kernel.org
Link: https://lore.kernel.org/20250706193207.39810-4-sj@kernel.org [1]
Fixes: 964314344eab ("samples/damon/mtier: support boot time enable setup")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Commit 2780505ec2b4 ("samples/damon/prcl: fix boot time enable crash") is
somehow incompletely applying the origin patch [1]. It is missing the
part that avoids starting DAMON before module initialization. Probably a
mistake during a merge has happened. Fix it by applying the missed part
again.
Link: https://lkml.kernel.org/r/20250909022238.2989-3-sj@kernel.org
Link: https://lore.kernel.org/20250706193207.39810-3-sj@kernel.org [1]
Fixes: 2780505ec2b4 ("samples/damon/prcl: fix boot time enable crash")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "samples/damon: fix boot time enable handling fixup merge
mistakes".
First three patches of the patch series "mm/damon: fix misc bugs in DAMON
modules" [1] were trying to fix boot time DAMON sample modules enabling
issues. The issues are the modules can crash if those are enabled before
DAMON is enabled, like using boot time parameter options. The three
patches were fixing the issues by avoiding starting DAMON before the
module initialization phase.
However, probably by a mistake during a merge, only half of the change is
merged, and the part for avoiding the starting of DAMON before the module
initialized is missed. So the problem is not solved and thus the modules
can still crash if enabled before DAMON is initialized. Fix those by
applying the unmerged parts again.
Note that the broken commits are merged into 6.17-rc1, but also backported
to relevant stable kernels. So this series also needs to be merged into
the stable kernels. Hence Cc-ing stable@.
This patch (of 3):
Commit 0ed1165c3727 ("samples/damon/wsse: fix boot time enable handling")
is somehow incompletely applying the origin patch [2]. It is missing the
part that avoids starting DAMON before module initialization. Probably a
mistake during a merge has happened. Fix it by applying the missed part
again.
Link: https://lkml.kernel.org/r/20250909022238.2989-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20250909022238.2989-2-sj@kernel.org
Link: https://lkml.kernel.org/r/20250706193207.39810-1-sj@kernel.org [1]
Link: https://lore.kernel.org/20250706193207.39810-2-sj@kernel.org [2]
Fixes: 0ed1165c3727 ("samples/damon/wsse: fix boot time enable handling")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
