| Age | Commit message (Collapse) | Author |
|---|
|
Perform fix similar to the one in the commit 85e444a68126 ("drm/bridge:
Fix assignment of the of_node of the parent to aux bridge").
The assignment of the of_node to the aux HPD bridge needs to mark the
of_node as reused, otherwise driver core will attempt to bind resources
like pinctrl, which is going to fail as corresponding pins are already
marked as used by the parent device.
Fix that by using the device_set_of_node_from_dev() helper instead of
assigning it directly.
Fixes: e560518a6c2e ("drm/bridge: implement generic DP HPD bridge")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250608-fix-aud-hpd-bridge-v1-1-4641a6f8e381@oss.qualcomm.com
|
|
drm_panel_bridge_add_typed
The commit 5ea6b1702781 ("drm/panel: Add prepare_prev_first flag to
drm_panel") and commit 0974687a19c3 ("drm/bridge: panel: Set
pre_enable_prev_first from drmm_panel_bridge_add") added handling of
panel's prepare_prev_first to devm_panel_bridge_add() and
drmm_panel_bridge_add(). However if the driver calls
drm_panel_bridge_add_typed() directly, then the flag won't be handled
and thus the drm_bridge.pre_enable_prev_first will not be set.
Move prepare_prev_first handling to the drm_panel_bridge_add_typed() so
that there is no way to miss the flag.
Fixes: 5ea6b1702781 ("drm/panel: Add prepare_prev_first flag to drm_panel")
Fixes: 0974687a19c3 ("drm/bridge: panel: Set pre_enable_prev_first from drmm_panel_bridge_add")
Reported-by: Svyatoslav Ryhel <clamor95@gmail.com>
Closes: https://lore.kernel.org/dri-devel/CAPVz0n3YZass3Bns1m0XrFxtAC0DKbEPiW6vXimQx97G243sXw@mail.gmail.com/
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250220-panel_prev_first-v1-1-b9e787825a1a@linaro.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC fixes from Alexandre Belloni:
"Some fixes for 6.16. The cmos one is important for PREEMPT_RT. I've
also added the s5m changes as they had a dependency on the MFD pull
request that was included in 6.16-rc1 and we didn't synchronize before
the merge window and they won't hurt.
- cmos: use spin_lock_irqsave in cmos_interrupt
- pcf2127: fix SPI command byte for PCF2131
- s5m: add S2MPG10 support"
* tag 'rtc-6.16-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
rtc: pcf2127: add missing semicolon after statement
rtc: pcf2127: fix SPI command byte for PCF2131
rtc: cmos: use spin_lock_irqsave in cmos_interrupt
rtc: s5m: replace open-coded read/modify/write registers with regmap helpers
rtc: s5m: replace regmap_update_bits with regmap_clear/set_bits
rtc: s5m: switch to devm_device_init_wakeup
rtc: s5m: fix a typo: peding -> pending
rtc: s5m: add support for S2MPG10 RTC
rtc: s5m: prepare for external regmap
rtc: s5m: cache device type during probe
|
|
Currently, the driver_data of the i2c ID table is wrong, so it won't
work if any mp886x user makes use of the ID table. Fortunately, there's
no such user in upstream source code, we can fix the issue by using
different ID table entry for mp8867 and mp8869.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20250629095918.912-1-jszhang@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Currently, the driver_data of the i2c ID table is wrong, so it won't
work if any sy8824x user makes use of the ID table. Fortunately, there's
no such user in upstream source code, we can fix the issue by using
different ID table entry for sy8824c, sy8824e, sy20276 and sy20278.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20250629095905.898-1-jszhang@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
irq-msi-lib directly uses struct msi_domain_info and more things which are
only available when CONFIG_GENERIC_MSI_IRQ=y.
However, there is no dependency specified and CONFIG_IRQ_MSI_LIB can be
enabled without CONFIG_GENERIC_MSI_IRQ, which causes the kernel build fail.
Make IRQ_MSI_LIB select GENEREIC_MSI_IRQ to prevent that.
Fixes: 72e257c6f058 ("irqchip: Provide irq-msi-lib")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/b0c44007f3b7e062228349a2395f8d850050db33.1751277765.git.namcao@linutronix.de
Closes: https://lore.kernel.org/oe-kbuild-all/202506282256.cHlEHrdc-lkp@intel.com/
|
|
Delayed work that prevents USB3 hubs from runtime-suspending too early
needed to be flushed in hub_quiesce() to resolve issues detected on
QC SC8280XP CRD board during suspend resume testing.
This flushing did however trigger new issues on Raspberry Pi 3B+, which
doesn't have USB3 ports, and doesn't queue any post resume delayed work.
The flushed 'hub->init_work' item is used for several purposes, and
is originally initialized with a 'NULL' work function. The work function
is also changed on the fly, which may contribute to the issue.
Solve this by creating a dedicated delayed work item for post resume work,
and flush that delayed work in hub_quiesce()
Cc: stable <stable@kernel.org>
Fixes: a49e1e2e785f ("usb: hub: Fix flushing and scheduling of delayed work that tunes runtime pm")
Reported-by: Mark Brown <broonie@kernel.org>
Closes: https://lore.kernel.org/linux-usb/aF5rNp1l0LWITnEB@finisterre.sirena.org.uk
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Tested-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> # SC8280XP CRD
Tested-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20250627164348.3982628-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
There is a potential NULL pointer dereference in zd_mac_tx_to_dev(). For
example, the following is possible:
T0 T1
zd_mac_tx_to_dev()
/* len == skb_queue_len(q) */
while (len > ZD_MAC_MAX_ACK_WAITERS) {
filter_ack()
spin_lock_irqsave(&q->lock, flags);
/* position == skb_queue_len(q) */
for (i=1; i<position; i++)
skb = __skb_dequeue(q)
if (mac->type == NL80211_IFTYPE_AP)
skb = __skb_dequeue(q);
spin_unlock_irqrestore(&q->lock, flags);
skb_dequeue() -> NULL
Since there is a small gap between checking skb queue length and skb being
unconditionally dequeued in zd_mac_tx_to_dev(), skb_dequeue() can return NULL.
Then the pointer is passed to zd_mac_tx_status() where it is dereferenced.
In order to avoid potential NULL pointer dereference due to situations like
above, check if skb is not NULL before passing it to zd_mac_tx_status().
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 459c51ad6e1f ("zd1211rw: port to mac80211")
Signed-off-by: Daniil Dulov <d.dulov@aladdin.ru>
Link: https://patch.msgid.link/20250626114619.172631-1-d.dulov@aladdin.ru
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
S1G beacons contain fixed length optional fields that precede the
variable length elements, ensure we take this into account when
validating the beacon. This particular case was missed in
1e1f706fc2ce ("wifi: cfg80211/mac80211: correctly parse S1G
beacon optional elements").
Fixes: 1d47f1198d58 ("nl80211: correctly validate S1G beacon head")
Signed-off-by: Lachlan Hodges <lachlan.hodges@morsemicro.com>
Link: https://patch.msgid.link/20250626115118.68660-1-lachlan.hodges@morsemicro.com
[shorten/reword subject]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add FALLOC_FL_ALLOCATE_RANGE to the set of supported fallocate flags in
XFS_FALLOC_FL_SUPPORTED. This change improves code clarity and maintains
by explicitly showing this flag in the supported flags mask.
Note that since FALLOC_FL_ALLOCATE_RANGE is defined as 0x00, this addition
has no functional modifications.
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Youling Tang <tangyouling@kylinos.cn>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
Merge series from Gabor Juhos <j4g8y7@gmail.com>:
The 'spi-qpic-nand' driver may cause memory corruption under some
circumstances. The first patch in the series changes the driver to
avoid that, whereas the second adds some sanity checks to the common
QPIC code in order to make detecting such errors easier in the future.
|
|
Unlocking the resv object was missing in the error path, additionally to
that we should move over the resource only after the fence slot was
reserved.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Fixes: c8d4c18bfbc4a ("dma-buf/drivers: make reserving a shared slot mandatory v4")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20250616130726.22863-3-christian.koenig@amd.com
|
|
Even the kerneldoc says that with a zero timeout the function should not
wait for anything, but still return 1 to indicate that the fences are
signaled now.
Unfortunately that isn't what was implemented, instead of only returning
1 we also waited for at least one jiffies.
Fix that by adjusting the handling to what the function is actually
documented to do.
v2: improve code readability
Reported-by: Marek Olšák <marek.olsak@amd.com>
Reported-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20250129105841.1806-1-christian.koenig@amd.com
|
|
Fixes a logic issue in mlxreg_lc_completion_notify() where the
intention was to check if MLXREG_LC_POWERED flag is not set before
powering on the device.
The original code used "state & ~MLXREG_LC_POWERED" to check for the
absence of the POWERED bit. However this condition evaluates to true
even when other bits are set, leading to potentially incorrect
behavior.
Corrected the logic to explicitly check for the absence of
MLXREG_LC_POWERED using !(state & MLXREG_LC_POWERED).
Fixes: 62f9529b8d5c ("platform/mellanox: mlxreg-lc: Add initial support for Nvidia line card devices")
Suggested-by: Vadim Pasternak <vadimp@nvidia.com>
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Link: https://lore.kernel.org/r/20250630105812.601014-1-alok.a.tiwari@oracle.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
loongarch and mips both support hardware that uses the i2c-piix4 driver.
It should not be restricted to x86, so drop the x86 dependency.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Closes: https://lore.kernel.org/all/CAMuHMdVPQLjOox5sMp34Z5MTwKv2WOpHa=MpZr8hWG22fQKcjw@mail.gmail.com/
Fixes: 7e173eb82ae97175 ("i2c: piix4: Make CONFIG_I2C_PIIX4 dependent on CONFIG_X86").
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Acked-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250610205817.3912944-2-superm1@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
A new header fch.h was created to store registers used by different AMD
drivers. This header was included by i2c-piix4 in
commit 624b0d5696a8 ("i2c: piix4, x86/platform: Move the SB800 PIIX4 FCH
definitions to <asm/amd/fch.h>"). To prevent compile failures on non-x86
archs i2c-piix4 was set to only compile on x86 by commit 7e173eb82ae9717
("i2c: piix4: Make CONFIG_I2C_PIIX4 dependent on CONFIG_X86").
This was not a good decision because loongarch and mips both actually
support i2c-piix4 and set it enabled in the defconfig.
Move the header to a location accessible by all architectures.
Fixes: 624b0d5696a89 ("i2c: piix4, x86/platform: Move the SB800 PIIX4 FCH definitions to <asm/amd/fch.h>")
Suggested-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Link: https://lore.kernel.org/r/20250610205817.3912944-1-superm1@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Add ACPI ID for Wildcat Lake.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20250617232913.3314765-1-srinivas.pandruvada@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Devices under the firmware_attributes_class do not have unique a dev_t.
Therefore, device_unregister() should be used instead of
device_destroy(), since the latter may match any device with a given
dev_t.
Fixes: e8a60aa7404b ("platform/x86: Introduce support for Systems Management Driver over WMI for Dell Systems")
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250625-dest-fix-v1-3-3a0f342312bb@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Devices under the firmware_attributes_class do not have unique a dev_t.
Therefore, device_unregister() should be used instead of
device_destroy(), since the latter may match any device with a given
dev_t.
Fixes: a40cd7ef22fb ("platform/x86: think-lmi: Add WMI interface support on Lenovo platforms")
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250625-dest-fix-v1-2-3a0f342312bb@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Devices under the firmware_attributes_class do not have unique a dev_t.
Therefore, device_unregister() should be used instead of
device_destroy(), since the latter may match any device with a given
dev_t.
Fixes: a34fc329b189 ("platform/x86: hp-bioscfg: bioscfg")
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250625-dest-fix-v1-1-3a0f342312bb@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The Quartz 64 Model-A Schematic from 20210427 on page 7 shows that the
fan's power supply is provided by VCC12V_DCIN.
This fixes the following warning:
gpio-fan gpio_fan: supply fan not found, using dummy regulator
Signed-off-by: Diederik de Haas <didi.debian@cknow.org>
Link: https://lore.kernel.org/r/20250628142843.839150-1-didi.debian@cknow.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Hardware CS has a very slow rise time of about 6us,
causing transmission errors when CS does not reach
high between transaction.
It looks like it's not driven actively when transitioning
from low to high but switched to input, so only the CPU
pull-up pulls it high, slowly. Transitions from high to low
are fast. On the oscilloscope, CS looks like an irregular sawtooth
pattern like this:
_____
^ / |
^ /| / |
/| / | / |
/ | / | / |
___/ |___/ |_____/ |___
With cs-gpios we have a CS rise time of about 20ns, as it should be,
and CS looks rectangular.
This fixes the data errors when running a flashcp loop against a
m25p40 spi flash.
With the Rockchip 6.1 kernel we see the same slow rise time, but
for some reason CS is always high for long enough to reach a solid
high.
The RK3399 and RK3588 SoCs use the same SPI driver, so we also
checked our "Puma" (RK3399) and "Tiger" (RK3588) boards.
They do not have this problem. Hardware CS rise time is good.
Fixes: c484cf93f61b ("arm64: dts: rockchip: add PX30-µQ7 (Ringneck) SoM with Haikou baseboard")
Cc: stable@vger.kernel.org
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Signed-off-by: Jakob Unterwurzacher <jakob.unterwurzacher@cherry.de>
Link: https://lore.kernel.org/r/20250627131715.1074308-1-jakob.unterwurzacher@cherry.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Existing swnode graph format is specific to sensor device
and is causing conflicts when accessing standard property
variables outside the sensor driver.
To address this issue, enhanced swnode graph format with
dedicated nodes for i2c and isp devices, with sensor node
added as child to i2c node. This approach allows to have
standard property variables (ex: 'clock-frequency') with
values applicable for each of the devices (sensor, i2c and
isp).
ACPI device driver_data handle is also initialized with root
camera swnode to access the property variables in the graph
in isp and i2c drivers.
Signed-off-by: Pratap Nirujogi <pratap.nirujogi@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20250618202958.3934822-1-pratap.nirujogi@amd.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Fix the lockdep splat caused by missing sysfs_attr_init() calls for the
recently added EDAC feature's sysfs attributes.
In lockdep_init_map_type(), the check for the lock-class key if
(!static_obj(key) && !is_dynamic_key(key)) causes the splat.
Backtrace:
RIP: 0010:lockdep_init_map_type
Call Trace:
__kernfs_create_file
sysfs_add_file_mode_ns
internal_create_group
internal_create_groups
device_add
? __init_waitqueue_head
edac_dev_register
devm_cxl_memdev_edac_register
? lock_acquire
? find_held_lock
? cxl_mem_probe
? cxl_mem_probe
? lockdep_hardirqs_on
? cxl_mem_probe
cxl_mem_probe
[ bp: Massage. ]
Fixes: f90b738166fe ("EDAC: Add scrub control feature")
Fixes: bcbd069b11b0 ("EDAC: Add a Error Check Scrub control feature")
Fixes: 699ea5219c4b ("EDAC: Add a memory repair control feature")
Reported-by: Dave Jiang <dave.jiang@intel.com>
Suggested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://lore.kernel.org/20250626101344.1726-1-shiju.jose@huawei.com
|
|
After retrieving WMI data blocks in sysfs callbacks, check for the
validity of them before dereferencing their content.
Reported-by: Jan Graczyk <jangraczyk@yahoo.ca>
Closes: https://lore.kernel.org/r/CAHk-=wgMiSKXf7SvQrfEnxVtmT=QVQPjJdNjfm3aXS7wc=rzTw@mail.gmail.com/
Fixes: e8a60aa7404b ("platform/x86: Introduce support for Systems Management Driver over WMI for Dell Systems")
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250630-sysman-fix-v2-1-d185674d0a30@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
commit 3172fb986666 ("perf/core: Fix WARN in perf_cgroup_switch()") try to
fix a concurrency problem between perf_cgroup_switch and
perf_cgroup_event_disable. But it does not to move the WARN_ON_ONCE into
lock-protected region, so the warning is still be triggered.
Fixes: 3172fb986666 ("perf/core: Fix WARN in perf_cgroup_switch()")
Signed-off-by: Luo Gengkun <luogengkun@huaweicloud.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20250626135403.2454105-1-luogengkun@huaweicloud.com
|
|
Previously we were filtering out only upper unsupported sampling rates.
This patch adds filtering of the lower unsupported sampling rates. As a
result there is 1:1 mapping between altsetting and supported rates.
The issue was found on a Scarlett 3rd Gen card (see linked bug), but the
same filtering is likely needed for the Scarlett 1st and 2nd Gen as well
as the older Clarett cards which lacks Valid Alternate Setting Control.
Patch was not tested on a real hardware.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=214493
Signed-off-by: Alexander Tsoy <alexander@tsoy.me>
Link: https://patch.msgid.link/20250630013357.1327420-1-alexander@tsoy.me
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Since commit 6b9f29b81b15 ("riscv: Enable pcpu page first chunk
allocator"), if NUMA is enabled, the page percpu allocator may be used
on very sparse configurations, or when requested on boot with
percpu_alloc=page.
In that case, percpu data gets put in the vmalloc area. However,
sbi_hsm_hart_start() needs the physical address of a sbi_hart_boot_data,
and simply assumes that __pa() would work. This causes the just started
hart to immediately access an invalid address and hang.
Fortunately, struct sbi_hart_boot_data is not too large, so we can
simply allocate an array for boot_data statically, putting it in the
kernel image.
This fixes NUMA=y SMP boot on Sophgo SG2042.
To reproduce on QEMU: Set CONFIG_NUMA=y and CONFIG_DEBUG_VIRTUAL=y, then
run with:
qemu-system-riscv64 -M virt -smp 2 -nographic \
-kernel arch/riscv/boot/Image \
-append "percpu_alloc=page"
Kernel output:
[ 0.000000] Booting Linux on hartid 0
[ 0.000000] Linux version 6.16.0-rc1 (dram@sakuya) (riscv64-unknown-linux-gnu-gcc (GCC) 14.2.1 20250322, GNU ld (GNU Binutils) 2.44) #11 SMP Tue Jun 24 14:56:22 CST 2025
...
[ 0.000000] percpu: 28 4K pages/cpu s85784 r8192 d20712
...
[ 0.083192] smp: Bringing up secondary CPUs ...
[ 0.086722] ------------[ cut here ]------------
[ 0.086849] virt_to_phys used for non-linear address: (____ptrval____) (0xff2000000001d080)
[ 0.088001] WARNING: CPU: 0 PID: 1 at arch/riscv/mm/physaddr.c:14 __virt_to_phys+0xae/0xe8
[ 0.088376] Modules linked in:
[ 0.088656] CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.16.0-rc1 #11 NONE
[ 0.088833] Hardware name: riscv-virtio,qemu (DT)
[ 0.088948] epc : __virt_to_phys+0xae/0xe8
[ 0.089001] ra : __virt_to_phys+0xae/0xe8
[ 0.089037] epc : ffffffff80021eaa ra : ffffffff80021eaa sp : ff2000000004bbc0
[ 0.089057] gp : ffffffff817f49c0 tp : ff60000001d60000 t0 : 5f6f745f74726976
[ 0.089076] t1 : 0000000000000076 t2 : 705f6f745f747269 s0 : ff2000000004bbe0
[ 0.089095] s1 : ff2000000001d080 a0 : 0000000000000000 a1 : 0000000000000000
[ 0.089113] a2 : 0000000000000000 a3 : 0000000000000000 a4 : 0000000000000000
[ 0.089131] a5 : 0000000000000000 a6 : 0000000000000000 a7 : 0000000000000000
[ 0.089155] s2 : ffffffff8130dc00 s3 : 0000000000000001 s4 : 0000000000000001
[ 0.089174] s5 : ffffffff8185eff8 s6 : ff2000007f1eb000 s7 : ffffffff8002a2ec
[ 0.089193] s8 : 0000000000000001 s9 : 0000000000000001 s10: 0000000000000000
[ 0.089211] s11: 0000000000000000 t3 : ffffffff8180a9f7 t4 : ffffffff8180a9f7
[ 0.089960] t5 : ffffffff8180a9f8 t6 : ff2000000004b9d8
[ 0.089984] status: 0000000200000120 badaddr: ffffffff80021eaa cause: 0000000000000003
[ 0.090101] [<ffffffff80021eaa>] __virt_to_phys+0xae/0xe8
[ 0.090228] [<ffffffff8001d796>] sbi_cpu_start+0x6e/0xe8
[ 0.090247] [<ffffffff8001a5da>] __cpu_up+0x1e/0x8c
[ 0.090260] [<ffffffff8002a32e>] bringup_cpu+0x42/0x258
[ 0.090277] [<ffffffff8002914c>] cpuhp_invoke_callback+0xe0/0x40c
[ 0.090292] [<ffffffff800294e0>] __cpuhp_invoke_callback_range+0x68/0xfc
[ 0.090320] [<ffffffff8002a96a>] _cpu_up+0x11a/0x244
[ 0.090334] [<ffffffff8002aae6>] cpu_up+0x52/0x90
[ 0.090384] [<ffffffff80c09350>] bringup_nonboot_cpus+0x78/0x118
[ 0.090411] [<ffffffff80c11060>] smp_init+0x34/0xb8
[ 0.090425] [<ffffffff80c01220>] kernel_init_freeable+0x148/0x2e4
[ 0.090442] [<ffffffff80b83802>] kernel_init+0x1e/0x14c
[ 0.090455] [<ffffffff800124ca>] ret_from_fork_kernel+0xe/0xf0
[ 0.090471] [<ffffffff80b8d9c2>] ret_from_fork_kernel_asm+0x16/0x18
[ 0.090560] ---[ end trace 0000000000000000 ]---
[ 1.179875] CPU1: failed to come online
[ 1.190324] smp: Brought up 1 node, 1 CPU
Cc: stable@vger.kernel.org
Reported-by: Han Gao <rabenda.cn@gmail.com>
Fixes: 6b9f29b81b15 ("riscv: Enable pcpu page first chunk allocator")
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Tested-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Vivian Wang <wangruikang@iscas.ac.cn>
Link: https://lore.kernel.org/r/20250624-riscv-hsm-boot-data-array-v1-1-50b5eeafbe61@iscas.ac.cn
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
|
|
After the combination of commit c217157bcd1d ("riscv: Implement
HAVE_DYNAMIC_FTRACE_WITH_CALL_OPS"), which starts using
'-fpatchable-function-entry=M,N', and commit d0262e907e29 ("riscv:
ftrace: support PREEMPT"), which allows CONFIG_DYNAMIC_FTRACE to be
enabled by allmodconfig, allmodconfig builds with clang-16 begin
crashing in the generic LLVM kCFI pass (see [1] for the stack trace).
clang-17 avoids this crash by moving to target-specific lowering of the
kCFI operand bundles [2]. Require clang-17 to select CONFIG_CFI_CLANG to
avoid this crash.
Fixes: c217157bcd1d ("riscv: Implement HAVE_DYNAMIC_FTRACE_WITH_CALL_OPS")
Link: https://godbolt.org/z/xG39Pn16o [1]
Link: https://github.com/llvm/llvm-project/commit/62fa708ceb027713b386c7e0efda994f8bdc27e2 [2]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Link: https://lore.kernel.org/r/20250612-riscv-require-clang-17-for-kcfi-v1-1-216f7cd7d87f@kernel.org
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
|
|
The sysfs attributes are registered early, but the driver does not know
whether they are needed or not at that moment.
For the CMB attributes, commit e917a849c3fc ("nvme-pci: refresh visible
attrs for cmb attributes") solved this problem by
calling nvme_update_attrs after mapping the CMB. However the issue
persists for the HMB attributes. To solve the problem, moved the call to
nvme_update_attrs after nvme_setup_host_mem, which sets up the HMB.
Fixes: e917a849c3fc ("nvme-pci: refresh visible attrs for cmb attributes")
Fixes: 86adbf0cdb9e ("nvme: simplify transport specific device attribute handling")
Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com>
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
If nvmet receives commands with metadata there is a continuous memory
leak of kmalloc-128 slab or more precisely bio->bi_integrity.
Since commit bf4c89fc8797 ("block: don't call bio_uninit from bio_endio")
each user of bio_init has to use bio_uninit as well. Otherwise the bio
integrity is not getting free. Nvmet uses bio_init for inline bios.
Uninit the inline bio to complete deallocation of integrity in bio.
Fixes: bf4c89fc8797 ("block: don't call bio_uninit from bio_endio")
Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
The blktests nvme/058 manifests an issue where the NVMe subsystem
kobject entry remains stale in sysfs, causing a failure during
subsequent NVMe module reloads[1]. Specifically, when attempting to
register a new NVMe subsystem, the driver encounters a kobejct name
collision because a stale kobject still exists. Though, please note
that nvme/058 doesn't report any failure and test case passes and
it's only during subsequent NVMe module reloads, the stale nvme sub-
system kobject entry in sysfs causes the observed symptom[1].
This issue stems from an imbalance in the get/put usage of the namespace
head (nshead) reference counter. The nshead holds a reference to the
associated NVMe subsystem. If the nshead reference is not properly
released, it prevents the cleanup of the subsystem's kobject, leaving
nvme subsystem stale entry behind in sysfs.
During the failure case, the last namespace path referencing a nshead
is removed, but the nshead reference was not released. This occurs
because the release logic currently only puts the nshead reference
when its state is LIVE. However, in configurations where ANA (Asymmetric
Namespace Access) is enabled, a namespace may be associated with an ANA
state that is neither optimized nor non-optimized. In this case, the
nshead may never transition to LIVE, and the corresponding nshead
reference is then never dropped. In fact nvme/058 associates some of
nvme namespaces to an inaccessible ANA state and with that nshead is
created but it's state is not transitioned to LIVE. So the current
logic would then causes nshead reference to be leaked for non-LIVE
states.
Another scenario, during namespace allocation, the driver first
allocates a nshead and then issues an Identify Namespace command. If
this command fails — which can happen in tests like nvme/058 that
rapidly enables and disables namespaces — we must release the reference
to the newly allocated nshead. However this reference release is
currently missing in the failure, causing a nshead reference leak.
To fix this, we now unconditionally release the nshead reference when
the last nvme path referencing to the nshead is removed, regardless of
the head’s state. Also during identify namespace failure case we now
properly release the nshead reference. So this ensures proper cleanup
of the nshead, and consequently, the NVMe subsystem and its associated
kobject.
This change prevents stale kobject entries from lingering in sysfs and
eliminates the module reload failures observed just after running
nvme/058.
[1] https://lore.kernel.org/all/CAHj4cs8fOBS-eSjsd5LUBzy7faKXJtgLkCN+mDy_-ezCLLLq+Q@mail.gmail.com/
Reported-by: yi.zhang@redhat.com
Closes: https://lore.kernel.org/all/CAHj4cs8fOBS-eSjsd5LUBzy7faKXJtgLkCN+mDy_-ezCLLLq+Q@mail.gmail.com/
Fixes: 62188639ec16 ("nvme-multipath: introduce delayed removal of the multipath head node")
Tested-by: yi.zhang@redhat.com
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Fix an error in nvme_log_err_passthru() where cdw14 was incorrectly
printed twice instead of cdw15. This fix ensures accurate logging of
the full passthrough command payload.
Fixes: 9f079dda1433 ("nvme: allow passthru cmd error logging")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Commit 77ba0b856225 ("drm/i915/dsi: convert vlv_dsi.[ch] to struct
intel_display") added a to_intel_display(connector) call to
vlv_dphy_param_init() but when vlv_dphy_param_init() gets called
the connector object has not been initialized yet, so this leads
to a NULL pointer deref:
BUG: kernel NULL pointer dereference, address: 000000000000000c
...
Hardware name: ASUSTeK COMPUTER INC. T100TA/T100TA, BIOS T100TA.314 08/13/2015
RIP: 0010:vlv_dsi_init+0x4e6/0x1600 [i915]
...
Call Trace:
<TASK>
? intel_step_name+0x4be8/0x5c30 [i915]
intel_setup_outputs+0x2d6/0xbd0 [i915]
intel_display_driver_probe_nogem+0x13f/0x220 [i915]
i915_driver_probe+0x3d9/0xaf0 [i915]
Use to_intel_display(&intel_dsi->base) instead to fix this.
Fixes: 77ba0b856225 ("drm/i915/dsi: convert vlv_dsi.[ch] to struct intel_display")
Signed-off-by: Hans de Goede <hansg@kernel.org>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/20250626143317.101706-1-hansg@kernel.org
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit 0dc6bfb50a5d0759e726cd36a3d3b7529fd2a627)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
There was an error pointer vs NULL bug in __igt_breadcrumbs_smoketest().
The __mock_request_alloc() function implements the
smoketest->request_alloc() function pointer. It was supposed to return
error pointers, but it propogates the NULL return from mock_request()
so in the event of a failure, it would lead to a NULL pointer
dereference.
To fix this, change the mock_request() function to return error pointers
and update all the callers to expect that.
Fixes: 52c0fdb25c7c ("drm/i915: Replace global breadcrumbs with per-context interrupt tracking")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/685c1417.050a0220.696f5.5c05@mx.google.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 778fa8ad5f0f23397d045c7ebca048ce8def1c43)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
Watchdog doesn't work on NXP ls1046ardb board because in commit
7c8ffc5555cb("arm64: dts: layerscape: remove big-endian for mmc nodes"),
it intended to remove the big-endian from mmc node, but the big-endian of
watchdog node is also removed by accident. So, add watchdog big-endian
property back.
In addition, add compatible string fsl,ls1046a-wdt, which allow big-endian
property.
Fixes: 7c8ffc5555cb ("arm64: dts: layerscape: remove big-endian for mmc nodes")
Cc: stable@vger.kernel.org
Signed-off-by: Meng Li <Meng.Li@windriver.com>
Reviewed-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The overshoot of MDIO, MDC, ENET1_TDx and ENET2_TDx is too high, so
reduce the drive strength of these pins.
Fixes: e3e8b199aff8 ("arm64: dts: imx95: Add imx95-15x15-evk support")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The overshoot of MDIO, MDC and ENET1_TDx is too high, so reduce the drive
strength these pins.
Fixes: 025cf78938c2 ("arm64: dts: imx95-19x19-evk: add ENETC 0 support")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The number of external channels is assumed to be a multiple of 10,
but this is not the case for IQS7222D. As a result, some CRx pins
are wrongly prevented from being assigned to some channels.
Address this problem by explicitly defining the number of external
channels for cases in which the number of external channels is not
equal to the total number of available channels.
Fixes: dd24e202ac72 ("Input: iqs7222 - add support for Azoteq IQS7222D")
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Link: https://lore.kernel.org/r/aGHVf6HkyFZrzTPy@nixie71
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
io_uring marks a request as dealing with a regular file on S_ISREG. This
drives things like retries on short reads or writes, which is generally
not expected on a regular file (or bdev). Applications tend to not
expect that, so io_uring tries hard to ensure it doesn't deliver short
IO on regular files.
However, a recent commit added S_IFREG to anonymous inodes. When
io_uring is used to read from various things that are backed by anon
inodes, like eventfd, timerfd, etc, then it'll now all of a sudden wait
for more data when rather than deliver what was read or written in a
single operation. This breaks applications that issue reads on anon
inodes, if they ask for more data than a single read delivers.
Add a check for !S_ANON_INODE as well before setting REQ_F_ISREG to
prevent that.
Cc: Christian Brauner <brauner@kernel.org>
Cc: stable@vger.kernel.org
Link: https://github.com/ghostty-org/ghostty/discussions/7720
Fixes: cfd86ef7e8e7 ("anon_inode: use a proper mode internally")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When SMB 3.1.1 POSIX Extensions are negotiated, userspace applications
using readdir() or getdents() calls without stat() on each individual file
(such as a simple "ls" or "find") would misidentify file types and exhibit
strange behavior such as not descending into directories. The reason for
this behavior is an oversight in the cifs_posix_to_fattr conversion
function. Instead of extracting the entry type for cf_dtype from the
properly converted cf_mode field, it tries to extract the type from the
PDU. While the wire representation of the entry mode is similar in
structure to POSIX stat(), the assignments of the entry types are
different. Applying the S_DT macro to cf_mode instead yields the correct
result. This is also what the equivalent function
smb311_posix_info_to_fattr in inode.c already does for stat() etc.; which
is why "ls -l" would give the correct file type but "ls" would not (as
identified by the colors).
Cc: stable@vger.kernel.org
Signed-off-by: Philipp Kerling <pkerling@casix.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
In target mode, extra interrupts can be received between the end of a
transfer and halting the module if the host continues sending more data.
If the interrupt from this occurs after the reinit_completion() then the
completion counter is left at a non-zero value. The next unrelated
transfer initiated by userspace will then complete immediately without
waiting for the interrupt or writing to the RX buffer.
Fix it by resetting the counter before the transfer so that lingering
values are cleared. This is done after clearing the FIFOs and the
status register but before the transfer is initiated, so no interrupts
should be received at this point resulting in other race conditions.
Fixes: 4f5ee75ea171 ("spi: spi-fsl-dspi: Replace interruptible wait queue with a simple completion")
Signed-off-by: James Clark <james.clark@linaro.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20250627-james-nxp-spi-dma-v4-1-178dba20c120@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
We have a system which uses 24 SPI chip selects, raise the hard coded
limit accordingly.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://patch.msgid.link/20250629-spi-increase-number-of-cs-v2-1-85a0a09bab32@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The common QPIC code does not do any boundary checking when it handles
the command elements and scatter gater list arrays of a BAM transaction,
thus it allows to access out of bounds elements in those.
Although it is the responsibility of the given driver to allocate enough
space for all possible BAM transaction variations, however there can be
mistakes in the driver code which can lead to hidden memory corruption
issues which are hard to debug.
This kind of problem has been observed during testing the 'spi-qpic-snand'
driver. Although the driver has been fixed with a preceding patch, but it
still makes sense to reduce the chance of having such errors again later.
In order to prevent such errors, change the qcom_alloc_bam_transaction()
function to store the number of elements of the arrays in the
'bam_transaction' strucutre during allocation. Also, add sanity checks to
the qcom_prep_bam_dma_desc_{cmd,data}() functions to avoid using out of
bounds indices for the arrays.
Tested-by: Lakshmi Sowjanya D <quic_laksd@quicinc.com> # on SDX75
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Link: https://patch.msgid.link/20250618-qpic-snand-avoid-mem-corruption-v3-2-319c71296cda@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Using the mtd_nandbiterrs module for testing the driver occasionally
results in weird things like below.
1. swiotlb mapping fails with the following message:
[ 85.926216] qcom_snand 79b0000.spi: swiotlb buffer is full (sz: 4294967294 bytes), total 512 (slots), used 0 (slots)
[ 85.932937] qcom_snand 79b0000.spi: failure in mapping desc
[ 87.999314] qcom_snand 79b0000.spi: failure to write raw page
[ 87.999352] mtd_nandbiterrs: error: write_oob failed (-110)
Rebooting the board after this causes a panic due to a NULL pointer
dereference.
2. If the swiotlb mapping does not fail, rebooting the board may result
in a different panic due to a bad spinlock magic:
[ 256.104459] BUG: spinlock bad magic on CPU#3, procd/2241
[ 256.104488] Unable to handle kernel paging request at virtual address ffffffff0000049b
...
Investigating the issue revealed that these symptoms are results of
memory corruption which is caused by out of bounds access within the
driver.
The driver uses a dynamically allocated structure for BAM transactions,
which structure must have enough space for all possible variations of
different flash operations initiated by the driver. The required space
heavily depends on the actual number of 'codewords' which is calculated
from the pagesize of the actual NAND chip.
Although the qcom_nandc_alloc() function allocates memory for the BAM
transactions during probe, but since the actual number of 'codewords'
is not yet know the allocation is done for one 'codeword' only.
Because of this, whenever the driver does a flash operation, and the
number of the required transactions exceeds the size of the allocated
arrays the driver accesses memory out of the allocated range.
To avoid this, change the code to free the initially allocated BAM
transactions memory, and allocate a new one once the actual number of
'codewords' required for a given NAND chip is known.
Fixes: 7304d1909080 ("spi: spi-qpic: add driver for QCOM SPI NAND flash Interface")
Reviewed-by: Md Sadre Alam <quic_mdalam@quicinc.com>
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Link: https://patch.msgid.link/20250618-qpic-snand-avoid-mem-corruption-v3-1-319c71296cda@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In probe(), two arrays of structs are allocated with the devm_kmalloc()
function, but the memory size of the allocations were given as the arrays'
length (pmic->common_irq_size for the first call and pmic->dev_irq_size for
the second devm_kmalloc call). The memory size should have been the total
memory needed.
This led to a heap overflow when the struct array was used. The issue was
first discovered with the PocketBeagle2 and BeaglePlay. The common and
device-specific structs are now allocated one at a time within the loop.
Fixes: 38c9f98db20a ("regulator: tps65219: Add support for TPS65215 Regulator IRQs")
Reported-by: Dhruva Gole <d-gole@ti.com>
Closes: https://lore.kernel.org/all/20250619153526.297398-1-d-gole@ti.com/
Tested-by: Robert Nelson <robertcnelson@gmail.com>
Acked-by: Andrew Davis <afd@ti.com>
Signed-off-by: Shree Ramamoorthy <s-ramamoorthy@ti.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
Link: https://patch.msgid.link/20250620154541.2713036-1-s-ramamoorthy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Failing to reset coupling_desc.n_coupled after freeing coupled_rdevs can
lead to NULL pointer dereference when regulators are accessed post-unbind.
This can happen during runtime PM or other regulator operations that rely
on coupling metadata.
For example, on ridesx4, unbinding the 'reg-dummy' platform device triggers
a panic in regulator_lock_recursive() due to stale coupling state.
Ensure n_coupled is set to 0 to prevent access to invalid pointers.
Signed-off-by: Alessandro Carminati <acarmina@redhat.com>
Link: https://patch.msgid.link/20250626083809.314842-1-acarmina@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When __regmap_init() is called from __regmap_init_i2c() and
__regmap_init_spi() (and their devm versions), the bus argument
obtained from regmap_get_i2c_bus() and regmap_get_spi_bus(), may be
allocated using kmemdup() to support quirks. In those cases, the
bus->free_on_exit field is set to true.
However, inside __regmap_init(), buf is not freed on any error path.
This could lead to a memory leak of regmap_bus when __regmap_init()
fails. Fix that by freeing bus on error path when free_on_exit is set.
Fixes: ea030ca68819 ("regmap-i2c: Set regmap max raw r/w from quirks")
Signed-off-by: Abdun Nihaal <abdun.nihaal@gmail.com>
Link: https://patch.msgid.link/20250626172823.18725-1-abdun.nihaal@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Matches should go from more specific to less specific, correct the
ordering of two cs42l43 entries.
Fixes: c0524067653d ("ASoC: Intel: soc-acpi: arl: Add match entries for new cs42l43 laptops")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250626141841.77780-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Some of the codec drivers like wcd939x are missing in the MAINTAINERS
which is resulting in incorrect list from get_maintainers script.
Fix this by using wildcard matching on both wcd93* and wsa88* codec and
bindings.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20250627160329.442795-1-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
