| Age | Commit message (Collapse) | Author |
|---|
|
Pick up TSA changes from mainline so that attack vectors work can
continue ontop.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
|
|
Enable sdhci driver support for SpacemiT K1 SoC, so eMMC storage
will be probed and activated, Tested on the Banana Pi BPI-F3 board.
Signed-off-by: Yixun Lan <dlan@gentoo.org>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
- Fix bogus KASAN splat on EFI runtime stack
- Select JUMP_LABEL unconditionally to avoid boot failure with pKVM and
the legacy implementation of static keys
- Avoid touching GCS registers when 'arm64.nogcs' has been passed on
the command-line
- Move a 'cpumask_t' off the stack in smp_send_stop()
- Don't advertise SME-related hwcaps to userspace when ID_AA64PFR1_EL1
indicates that SME is not implemented
- Always check the VMA when handling an Overlay fault
- Avoid corrupting TCR2_EL1 during boot
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64/mm: Drop wrong writes into TCR2_EL1
arm64: poe: Handle spurious Overlay faults
arm64: Filter out SME hwcaps when FEAT_SME isn't implemented
arm64: move smp_send_stop() cpu mask off stack
arm64/gcs: Don't try to access GCS registers if arm64.nogcs is enabled
arm64: Unconditionally select CONFIG_JUMP_LABEL
arm64: efi: Fix KASAN false positive for EFI runtime stack
|
|
Add device-tree for ASUS VivoTab RT TF600T, which is NVIDIA Tegra30-based
tablet device with Windows RT.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Link: https://lore.kernel.org/r/20250617070320.9153-3-clamor95@gmail.com
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Only select ARCH_WANT_HUGE_PMD_SHARE on 64-bit x86.
Page table sharing requires at least three levels because it involves
shared references to PMD tables; 32-bit x86 has either two-level paging
(without PAE) or three-level paging (with PAE), but even with
three-level paging, having a dedicated PGD entry for hugetlb is only
barely possible (because the PGD only has four entries), and it seems
unlikely anyone's actually using PMD sharing on 32-bit.
Having ARCH_WANT_HUGE_PMD_SHARE enabled on non-PAE 32-bit X86 (which
has 2-level paging) became particularly problematic after commit
59d9094df3d7 ("mm: hugetlb: independent PMD page table shared count"),
since that changes `struct ptdesc` such that the `pt_mm` (for PGDs) and
the `pt_share_count` (for PMDs) share the same union storage - and with
2-level paging, PMDs are PGDs.
(For comparison, arm64 also gates ARCH_WANT_HUGE_PMD_SHARE on the
configuration of page tables such that it is never enabled with 2-level
paging.)
Closes: https://lore.kernel.org/r/srhpjxlqfna67blvma5frmy3aa@altlinux.org
Fixes: cfe28c5d63d8 ("x86: mm: Remove x86 version of huge_pmd_share.")
Reported-by: Vitaly Chikunov <vt@altlinux.org>
Suggested-by: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Oscar Salvador <osalvador@suse.de>
Acked-by: David Hildenbrand <david@redhat.com>
Tested-by: Vitaly Chikunov <vt@altlinux.org>
Cc:stable@vger.kernel.org
Link: https://lore.kernel.org/all/20250702-x86-2level-hugetlb-v2-1-1a98096edf92%40google.com
|
|
Kasan crashes the kernel trying to check boundaries when using the
normal memcpy.
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
Link: https://lore.kernel.org/r/20250522-mach-tegra-kasan-v1-1-419041b8addb@gmail.com
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Previously, u64_replace_bits() was used to no effect as the return value
was ignored. Convert to u64p_replace_bits() so the value is updated in
place.
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Fixes: efff9dd2fee7 ("KVM: arm64: Handle out-of-bound write to MDCR_EL2.HPMN")
Link: https://lore.kernel.org/r/20250709093808.920284-2-ben.horgan@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
PTL uncore imc freerunning counters are the same as the previous HW.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Link: https://lore.kernel.org/r/20250707201750.616527-5-kan.liang@linux.intel.com
|
|
The Panther Lake supports CBOX, MC, sNCU, and HBO uncore PMON.
The CBOX is similar to Lunar Lake. The only difference is the number of
CBOX.
The other three uncore PMON can be retrieved from the discovery table.
The global control register resides in the sNCU. The global freeze bit
is set by default. It must be cleared before monitoring any uncore
counters.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Link: https://lore.kernel.org/r/20250707201750.616527-4-kan.liang@linux.intel.com
|
|
For a server platform, the MMIO map size is always 0x4000. However, a
client platform may have a smaller map size.
Make the map size customizable.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Link: https://lore.kernel.org/r/20250707201750.616527-3-kan.liang@linux.intel.com
|
|
Starting from the Panther Lake, the discovery table mechanism is also
supported in client platforms. The difference is that the portal of the
global discovery table is retrieved from an MSR.
The layout of discovery tables are the same as the server platforms.
Factor out __parse_discovery_table() to parse discover tables.
The uncore PMON is Die scope. Need to parse the discovery tables for
each die.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Link: https://lore.kernel.org/r/20250707201750.616527-2-kan.liang@linux.intel.com
|
|
Downloading firmware needs a device to hang off of, and so a platform device
seemed like the simplest way to do this. Now that we have a faux device
interface, use that instead as this "microcode device" is not anything
resembling a platform device at all.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Sohil Mehta <sohil.mehta@intel.com>
Link: https://lore.kernel.org/2025070121-omission-small-9308@gregkh
|
|
While the TI AM62P supports a junction temperature (Tj) of up to 125°C
for industrial and automotive parts, Toradex Verdin-AM62P hardware
lifetime guarantees consider a 105°C Tj. Change the passive trip points
to 95°C and the critical trip points to 105°C to be compliant with the
hardware specifications.
Signed-off-by: João Paulo Gonçalves <joao.goncalves@toradex.com>
Link: https://lore.kernel.org/r/20250623-b4-verdin-am62p-cooling-device-v1-2-cc185ba5843d@toradex.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
|
|
Enable throttling down the CPU frequency when an alert temperature
threshold is reached before the critical temperature for shutdown.
Signed-off-by: João Paulo Gonçalves <joao.goncalves@toradex.com>
Link: https://lore.kernel.org/r/20250623-b4-verdin-am62p-cooling-device-v1-1-cc185ba5843d@toradex.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
|
|
The upcoming auxiliary clocks need this hook, too.
To separate the architecture hooks from the timekeeper internals, refactor
the hook to only operate on a single vDSO clock.
While at it, use a more robust #define for the hook override.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250701-vdso-auxclock-v1-3-df7d9f87b9b8@linutronix.de
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Runtime PM updates related to autosuspend for 6.17
Make several autosuspend functions mark last busy stamp and update
the documentation accordingly (Sakari Ailus).
|
|
In case of an early crash the early program check handler also prints the
last breaking event address which is contained within the pt_regs
structure. However it is not initialized, and therefore a more or less
random value is printed in case of a crash.
Copy the last breaking event address from lowcore to pt_regs in case of an
early program check to address this. This also makes it easier to analyze
early crashes.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
Add DT node for PBIST_14 that is responsible for triggering the PBIST
self-tests for the MAIN_R5_2_x cores.
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
Link: https://lore.kernel.org/r/20250605063506.2005637-3-n-francis@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
|
|
For eMMC, High Speed DDR mode is not supported [0], so remove
mmc-ddr-1_8v flag which adds the capability.
[0] https://www.ti.com/lit/gpn/am625
Fixes: c37c58fdeb8a ("arm64: dts: ti: k3-am62: Add more peripheral nodes")
Cc: stable@vger.kernel.org
Signed-off-by: Judith Mendez <jm@ti.com>
Link: https://lore.kernel.org/r/20250707191250.3953990-1-jm@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
|
|
This moves pinmux child nodes for sdhci0 node from k3-am62x-sk-common
to each top level board file. This is needed since we require internal
pullups for AM62x SK and not for AM62 LP SK since it has external
pullups on DATA 1-7.
Internal pulls are required for AM62 SK as per JESD84 spec
recommendation to prevent unconnected lines floating.
Fixes: d19a66ae488a ("arm64: dts: ti: k3-am625-sk: Enable on board peripherals")
Cc: stable@vger.kernel.org
Signed-off-by: Judith Mendez <jm@ti.com>
Link: https://lore.kernel.org/r/20250707190830.3951619-1-jm@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
|
|
main_uart1 reserved for TIFS firmware traces is routed to the
onboard FT4232 via a FET switch which is connected to pin A21 and
B21 of the SoC and not E17 and C17. Fix it.
Fixes: cf39ff15cc01a ("arm64: dts: ti: k3-am62a7-sk: Describe main_uart1 and wkup_uart")
Cc: stable@vger.kernel.org
Signed-off-by: Hong Guan <hguan@ti.com>
[bb@ti.com: expanded commit message]
Signed-off-by: Bryan Brattlof <bb@ti.com>
Link: https://lore.kernel.org/r/20250707-uart-fixes-v1-1-8164147218b0@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
|
|
SDHCI devices in Spacemit K1 use storage-bus translations. Move the node
emmc under storage-bus to reflect this fact.
Signed-off-by: Vivian Wang <wangruikang@iscas.ac.cn>
Link: https://lore.kernel.org/r/20250623-k1-dma-buses-rfc-wip-v1-3-c0144082061f@iscas.ac.cn
Signed-off-by: Yixun Lan <dlan@gentoo.org>
|
|
UART devices in Spacemit K1 use dma-bus DMA translations. Move these
nodes under dma-bus to reflect this fact.
Signed-off-by: Vivian Wang <wangruikang@iscas.ac.cn>
Reviewed-by: Guodong Xu <guodong@riscstar.com>
Link: https://lore.kernel.org/r/20250623-k1-dma-buses-rfc-wip-v1-2-c0144082061f@iscas.ac.cn
Signed-off-by: Yixun Lan <dlan@gentoo.org>
|
|
The SpacemiT K1 has various static translations of DMA accesses. Add
these as simple-bus nodes with dma-ranges. Devices actually using these
translations will be added to or moved inside the bus nodes in later
patches.
The bus names are assigned according to consensus with SpacemiT [1].
Link: https://lore.kernel.org/r/CAH1PCMaC+imcMZCFYtRdmH6ge=dPgnANn_GqVfsGRS=+YhyJCw@mail.gmail.com [1]
Signed-off-by: Vivian Wang <wangruikang@iscas.ac.cn>
Reviewed-by: Guodong Xu <guodong@riscstar.com>
Link: https://lore.kernel.org/r/20250623-k1-dma-buses-rfc-wip-v1-1-c0144082061f@iscas.ac.cn
Signed-off-by: Yixun Lan <dlan@gentoo.org>
|
|
This patch adds the option 1 (hence the name pwm14_1) pinctrl
configuration for PWM14 on the SpacemiT K1 SoC.
PWM14 option 1 is used for PWM-based backlight control on MIPI displays.
This configuration is present on all existing K1 development boards,
such as the Banana Pi BPI-F3 and the Milk-V Jupiter.
For reference, a more complete list of PWM0-PWM19 pinctrl configurations
including all options can be found in [1].
Note: Since the corresponding functionality for other pins is not yet
in use or ready for upstreaming, this patch includes only the pwm14_1
setting.
[1] https://lore.kernel.org/all/20250411131423.3802611-7-guodong@riscstar.com/
Signed-off-by: Guodong Xu <guodong@riscstar.com>
Link: https://lore.kernel.org/r/20250429085048.1310409-5-guodong@riscstar.com
Signed-off-by: Yixun Lan <dlan@gentoo.org>
|
|
The SpacemiT K1 SoC features a PWM controller with 20 independent
channels. Add the corresponding 20 PWM nodes to the device tree.
Signed-off-by: Guodong Xu <guodong@riscstar.com>
Link: https://lore.kernel.org/r/20250429085048.1310409-4-guodong@riscstar.com
Signed-off-by: Yixun Lan <dlan@gentoo.org>
|
|
Allow overlays to be applied to any DTB without manually enabling it
for each file. This adds around ~10% to the total size of the DTB files
on average.
Signed-off-by: Andrew Davis <afd@ti.com>
Acked-by: Bryan Brattlof <bb@ti.com>
Link: https://lore.kernel.org/r/20250702145314.71996-1-afd@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
|
|
PWM_3_DSI is used as the HDMI Hot-Plug Detect (HPD) GPIO for the Verdin
DSI-to-HDMI adapter. After the commit 33bab9d84e52 ("arm64: dts: ti:
k3-am62p: fix pinctrl settings"), the pin was incorrectly set as output
without RXACTIVE, breaking HPD detection and display functionality.
The issue was previously hidden and worked by chance before the mentioned
pinctrl fix.
Fix the pinmux configuration to correctly set PWM_3_DSI GPIO as an input.
Fixes: 87f95ea316ac ("arm64: dts: ti: Add Toradex Verdin AM62P")
Signed-off-by: Parth Pancholi <parth.pancholi@toradex.com>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://lore.kernel.org/r/20250703084534.1649594-1-parth105105@gmail.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
|
|
Switch Schmitt Trigger functions for PIN_INPUT* macros by default. This is
HW PoR configuration, the slew rate requirements without ST enabled are
pretty tough for these devices. We've noticed spurious GPIO interrupts even
with noise-free edges but not meeting slew rate requirements (3.3E+6 V/s
for 3.3v LVCMOS).
It's not obvious why one might want to disable the PoR-enabled ST on any
pin. Just enable it by default. As it's not possible to provide OR-able
macros to disable the ST, shall anyone require it, provide a set of
new macros with _NOST suffix.
Fixes: fe49f2d776f7 ("arm64: dts: ti: Use local header for pinctrl register values")
Cc: stable@vger.kernel.org
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Link: https://lore.kernel.org/r/20250701105437.3539924-1-alexander.sverdlin@siemens.com
[vigneshr@ti.com: Add Fixes tag]
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
|
|
The PLPKS enabled PowerVM LPAR sysfs exposes all of the secure boot
secvars irrespective of the key management mode.
The PowerVM LPAR supports static and dynamic key management for secure
boot. The key management option can be updated in the management
console. The secvars PK, trustedcadb, and moduledb can be consumed both
in the static and dynamic key management modes for the loading of signed
third-party kernel modules. However, other secvars i.e. KEK, grubdb,
grubdbx, sbat, db and dbx, which are used to verify the grub and kernel
images, are consumed only in the dynamic key management mode.
Expose only PK, trustedcadb, and moduledb in the static key management
mode.
Co-developed-by: Souradeep <soura@imap.linux.ibm.com>
Signed-off-by: Souradeep <soura@imap.linux.ibm.com>
Signed-off-by: Srish Srinivasan <ssrish@linux.ibm.com>
Tested-by: R Nageswara Sastry <rnsastry@linux.ibm.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Nayna Jain <nayna@linux.ibm.com>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250610211907.101384-3-ssrish@linux.ibm.com
|
|
On a PLPKS enabled PowerVM LPAR, the secvar format property for static
key management is misrepresented as "ibm,plpks-sb-unknown", creating
reason for confusion.
Static key management mode uses fixed, built-in keys. Dynamic key
management mode allows keys to be updated in production to handle
security updates without firmware rebuilds.
Define a function named plpks_get_sb_keymgmt_mode() to retrieve the
key management mode based on the existence of the SB_VERSION property
in the firmware.
Set the secvar format property to either "ibm,plpks-sb-v<version>" or
"ibm,plpks-sb-v0" based on the key management mode, and return the
length of the secvar format property.
Co-developed-by: Souradeep <soura@imap.linux.ibm.com>
Signed-off-by: Souradeep <soura@imap.linux.ibm.com>
Signed-off-by: Srish Srinivasan <ssrish@linux.ibm.com>
Tested-by: R Nageswara Sastry <rnsastry@linux.ibm.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Nayna Jain <nayna@linux.ibm.com>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250610211907.101384-2-ssrish@linux.ibm.com
|
|
If the device configuration fails (if `dma_dev->device_config()`),
`sg_dma_address(&sg)` is not initialized and the jump to `err_dma_prep`
leads to calling `dma_unmap_single()` on `sg_dma_address(&sg)`.
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250610142918.169540-2-fourier.thomas@gmail.com
|
|
We have an application that uses almost the same code for TCP and
AF_UNIX (SOCK_STREAM).
TCP can use TCP_INQ, but AF_UNIX doesn't have it and requires an
extra syscall, ioctl(SIOCINQ) or getsockopt(SO_MEMINFO) as an
alternative.
Let's introduce the generic version of TCP_INQ.
If SO_INQ is enabled, recvmsg() will put a cmsg of SCM_INQ that
contains the exact value of ioctl(SIOCINQ). The cmsg is also
included when msg->msg_get_inq is non-zero to make sockets
io_uring-friendly.
Note that SOCK_CUSTOM_SOCKOPT is flagged only for SOCK_STREAM to
override setsockopt() for SOL_SOCKET.
By having the flag in struct unix_sock, instead of struct sock, we
can later add SO_INQ support for TCP and reuse tcp_sk(sk)->recvmsg_inq.
Note also that supporting custom getsockopt() for SOL_SOCKET will need
preparation for other SOCK_CUSTOM_SOCKOPT users (UDP, vsock, MPTCP).
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250702223606.1054680-7-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add in a probe function for GICv5 which enables support for GICv3
guests on a GICv5 host, if FEAT_GCIE_LEGACY is supported by the
hardware.
Co-authored-by: Timothy Hayes <timothy.hayes@arm.com>
Signed-off-by: Timothy Hayes <timothy.hayes@arm.com>
Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com>
Link: https://lore.kernel.org/r/20250627100847.1022515-6-sascha.bischoff@arm.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Add support for GICv3 compat mode (FEAT_GCIE_LEGACY) which allows a
GICv5 host to run GICv3-based VMs. This change enables the
VHE/nVHE/hVHE/protected modes, but does not support nested
virtualization.
A lazy-disable approach is taken for compat mode; it is enabled on the
vgic_v3_load path but not disabled on the vgic_v3_put path. A
non-GICv3 VM, i.e., one based on GICv5, is responsible for disabling
compat mode on the corresponding vgic_v5_load path. Currently, GICv5
is not supported, and hence compat mode is not disabled again once it
is enabled, and this function is intentionally omitted from the code.
Co-authored-by: Timothy Hayes <timothy.hayes@arm.com>
Signed-off-by: Timothy Hayes <timothy.hayes@arm.com>
Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com>
Link: https://lore.kernel.org/r/20250627100847.1022515-5-sascha.bischoff@arm.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
This system register is required to enable/disable V3 legacy mode when
running on a GICv5 host.
Co-authored-by: Timothy Hayes <timothy.hayes@arm.com>
Signed-off-by: Timothy Hayes <timothy.hayes@arm.com>
Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com>
Link: https://lore.kernel.org/r/20250627100847.1022515-4-sascha.bischoff@arm.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
AMD Cyan Skillfish (Family 17h, Model 47h, Stepping 0h) has an issue
that causes system oopses and panics when performing TLB flush using
INVLPGB.
However, the problem is that that machine has misconfigured CPUID and
should not report the INVLPGB bit in the first place. So zap the
kernel's representation of the flag so that nothing gets confused.
[ bp: Massage. ]
Fixes: 767ae437a32d ("x86/mm: Add INVLPGB feature and Kconfig entry")
Signed-off-by: Mikhail Paulyshka <me@mixaill.net>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/1ebe845b-322b-4929-9093-b41074e9e939@mixaill.net
|
|
AMD Cyan Skillfish (Family 17h, Model 47h, Stepping 0h) has an error that
causes RDSEED to always return 0xffffffff, while RDRAND works correctly.
Mask the RDSEED cap for this CPU so that both /proc/cpuinfo and direct CPUID
read report RDSEED as unavailable.
[ bp: Move to amd.c, massage. ]
Signed-off-by: Mikhail Paulyshka <me@mixaill.net>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/20250524145319.209075-1-me@mixaill.net
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull crypto library fix from Eric Biggers:
"Fix an uninitialized variable in the s390 optimized SHA-1 and SHA-2.
Note that my librarification changes also fix this by greatly
simplifying how the s390 optimized SHA code is integrated. However, we
need this separate fix for 6.16 and older versions"
* tag 'libcrypto-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux:
crypto: s390/sha - Fix uninitialized variable in SHA-1 and SHA-2
|
|
KVM might have an emulated SError queued for the guest if userspace
returned an abort for MMIO. Better yet, it could actually be a
*synchronous* exception in disguise if SCTLR2_ELx.EASE is set.
Don't advance PC if KVM owes an emulated SError, just like the handling
of emulated SEA injection.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250708172532.1699409-24-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
KVM's external abort injection now respects the exception routing
wreckage due to FEAT_DoubleFault2. Advertise the feature.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250708172532.1699409-23-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Everything is in place to handle the additional state for SCTLR2_ELx,
which is all that FEAT_SCTLR2 implies.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250708172532.1699409-22-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Per R_CDCKC, vSErrors are enabled if HCRX_EL2.TMEA is set, regardless of
HCR_EL2.AMO.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250708172532.1699409-21-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
As the name might imply, when NMEA is set SErrors are non-maskable and
can be taken regardless of PSTATE.A. As is the recurring theme with
DoubleFault2, the effects on SError routing are entirely backwards to
this.
If at EL1, NMEA is *not* considered for SError routing when TMEA is set
and the exception is taken to EL2 when PSTATE.A is set.
Link: https://lore.kernel.org/r/20250708172532.1699409-20-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
HCRX_EL2.TMEA further modifies the external abort behavior where
unmasked aborts are taken to EL1 and masked aborts are taken to EL2.
It's rather weird when you consider that SEAs are, well, *synchronous*
and therefore not actually maskable. However, for the purposes of
exception routing, they're considered "masked" if the A flag is set.
This gets a bit hairier when considering the fact that TMEA
also enables vSErrors, i.e. KVM has delegated the HW vSError context to
the guest hypervisor. We can keep the vSError context delegation as-is
by taking advantage of a couple properties:
- If SErrors are unmasked, the 'physical' SError can be taken
in-context immediately. In other words, KVM can emulate the EL1
SError while preserving vEL2's ownership of the vSError context.
- If SErrors are masked, the 'physical' SError is taken to EL2
immediately and needs the usual nested exception entry.
Note that the new in-context handling has the benign effect where
unmasked SError injections are emulated even for non-nested VMs.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250708172532.1699409-19-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
One of the finest additions of FEAT_DoubleFault2 is the ability for
software to request *synchronous* external aborts be taken to the
SError vector, which of coure are *asynchronous* in nature.
Opinions be damned, implement the architecture and send SEAs to the
SError vector if EASE is set for the target context.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250708172532.1699409-18-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
For historical reasons, Address size faults are first injected into the
guest as an SEA and ESR_EL1 is subsequently modified to reflect the
correct FSC. Of course, when dealing with a vEL2 this should poke
ESR_EL2.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250708172532.1699409-17-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Pull out the exception target selection from pend_sync_exception() for
general use. Use PSR_MODE_ELxh as a shorthand for the target EL, as
SP_ELx selection is handled further along in the hyp's exception
emulation.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250708172532.1699409-16-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
External abort injection will soon rely on a sanitised view of
SCTLR2_ELx to determine exception routing. Compute the RESx masks.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250708172532.1699409-15-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
HCRX_EL2.SCTLR2En needs to be set for SCTLR2_EL1 to take effect in
hardware (in addition to disabling traps).
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250708172532.1699409-14-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
