summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
AgeCommit message (Collapse)Author
2019-11-19drm/amdgpu: add a amdgpu_device_supports_baco helperAlex Deucher
BACO - Bus Active, Chip Off To check if a device supports BACO or not. This will be used in determining when to enable runtime pm. Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-11-19drm/amdgpu: put flush_delayed_work at firstYintian Tao
There is one regression from 042f3d7b745cd76aa To put flush_delayed_work after adev->shutdown = true which will make amdgpu_ih_process not response the irq At last, all ib ring tests will be failed just like below [drm] amdgpu: finishing device. [drm] Fence fallback timer expired on ring gfx [drm] Fence fallback timer expired on ring comp_1.0.0 [drm] Fence fallback timer expired on ring comp_1.1.0 [drm] Fence fallback timer expired on ring comp_1.2.0 [drm] Fence fallback timer expired on ring comp_1.3.0 [drm] Fence fallback timer expired on ring comp_1.0.1 amdgpu 0000:00:07.0: [drm:amdgpu_ib_ring_tests [amdgpu]] *ERROR* IB test failed on comp_1.1.1 (-110). amdgpu 0000:00:07.0: [drm:amdgpu_ib_ring_tests [amdgpu]] *ERROR* IB test failed on comp_1.2.1 (-110). amdgpu 0000:00:07.0: [drm:amdgpu_ib_ring_tests [amdgpu]] *ERROR* IB test failed on comp_1.3.1 (-110). amdgpu 0000:00:07.0: [drm:amdgpu_ib_ring_tests [amdgpu]] *ERROR* IB test failed on sdma0 (-110). amdgpu 0000:00:07.0: [drm:amdgpu_ib_ring_tests [amdgpu]] *ERROR* IB test failed on sdma1 (-110). amdgpu 0000:00:07.0: [drm:amdgpu_ib_ring_tests [amdgpu]] *ERROR* IB test failed on uvd_enc_0.0 (-110). amdgpu 0000:00:07.0: [drm:amdgpu_ib_ring_tests [amdgpu]] *ERROR* IB test failed on vce0 (-110). [drm:amdgpu_device_delayed_init_work_handler [amdgpu]] *ERROR* ib ring test failed (-110). v2: replace cancel_delayed_work_sync() with flush_delayed_work() Signed-off-by: Yintian Tao <yttao@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-11-19drm/amdgpu: add driver support for JPEG2.0 and aboveLeo Liu
By using JPEG IP block type Signed-off-by: Leo Liu <leo.liu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-11-13drm/amdgpu: add function parameter description in 'amdgpu_device_set_cg_state'yu kuai
Fixes gcc warning: drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:1954: warning: Function parameter or member 'state' not described in 'amdgpu_device_set_cg_state' Fixes: e3ecdffac9cc ("drm/amdgpu: add documentation for amdgpu_device.c") Signed-off-by: yu kuai <yukuai3@huawei.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-11-13drm/amd/display: rename DCN1_0 kconfig to DCNBhawanpreet Lakha
Since dcn20 and dcn21 are under dcn1 it doesnt make sense to have it named dcn1. Change it to "dcn" to make it generic Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-11-13drm/amd/display: Drop CONFIG_DRM_AMD_DC_DCN2_1 flagBhawanpreet Lakha
[Why] DCN21 is stable enough to be build by default. So drop the flags. [How] Remove them using the unifdef tool. The following commands were executed in sequence: $ find -name '*.c' -exec unifdef -m -DCONFIG_DRM_AMD_DC_DCN2_1 -UCONFIG_TRIM_DRM_AMD_DC_DCN2_1 '{}' ';' $ find -name '*.h' -exec unifdef -m -DCONFIG_DRM_AMD_DC_DCN2_1 -UCONFIG_TRIM_DRM_AMD_DC_DCN2_1 '{}' ';' In addition: * Remove from kconfig, and replace any dependencies with DCN1_0. * Remove from any makefiles. * Fix and cleanup Renoir definitions in dal_asic_id.h * Expand DCN1 ifdef to include DCN21 code in the following files: * clk_mgr/clk_mgr.c: dc_clk_mgr_create() * core/dc_resources.c: dc_create_resource_pool() * gpio/hw_factory.c: dal_hw_factory_init() * gpio/hw_translate.c: dal_hw_translate_init() Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-11-13drm/amd/display: Drop CONFIG_DRM_AMD_DC_DCN2_0 and DSC_SUPPORTEDBhawanpreet Lakha
[Why] DCN2 and DSC are stable enough to be build by default. So drop the flags. [How] Remove them using the unifdef tool. The following commands were executed in sequence: $ find -name '*.c' -exec unifdef -m -DCONFIG_DRM_AMD_DC_DSC_SUPPORT -DCONFIG_DRM_AMD_DC_DCN2_0 -UCONFIG_TRIM_DRM_AMD_DC_DCN2_0 '{}' ';' $ find -name '*.h' -exec unifdef -m -DCONFIG_DRM_AMD_DC_DSC_SUPPORT -DCONFIG_DRM_AMD_DC_DCN2_0 -UCONFIG_TRIM_DRM_AMD_DC_DCN2_0 '{}' ';' In addition: * Remove from kconfig, and replace any dependencies with DCN1_0. * Remove from any makefiles. * Fix and cleanup NV defninitions in dal_asic_id.h * Expand DCN1 ifdef to include DCN2 code in the following files: * clk_mgr/clk_mgr.c: dc_clk_mgr_create() * core/dc_resources.c: dc_create_resource_pool() * dce/dce_dmcu.c: dcn20_*lock_phy() * dce/dce_dmcu.c: dcn20_funcs * dce/dce_dmcu.c: dcn20_dmcu_create() * gpio/hw_factory.c: dal_hw_factory_init() * gpio/hw_translate.c: dal_hw_translate_init() Signed-off-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-11-11drm/amd/amdgpu: finish delay works before release resourcesJesse Zhang
flush/cancel delayed works before doing finalization to avoid concurrently requests. Signed-off-by: Jesse Zhang <zhexi.zhang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-11-06drm/amdgpu: perform p-state switch after the whole hive initializedEvan Quan
P-state switch should be performed after all devices from the hive get initialized. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Reviewed-by: Jonathan Kim <Jonathan.Kim@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-11-06drm/amdgpu: register gpu instance before fan boost feature enablmentEvan Quan
Otherwise, the feature enablement will be skipped due to wrong count. Fixes: beff74bc6e0fa91 ("drm/amdgpu: fix a race in GPU reset with IB test (v2)") Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-11-06drm/amdgpu: change pstate only after all XGMI device initializedEvan Quan
Pstate settings should be performed after all device of the XGMI setup get initialized. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-30drm/amdgpu: bypass some cleanup work after err_event_athub (v2)Le Ma
PSP lost connection when err_event_athub occurs. These cleanup work can be skipped in BACO reset. v2: squash in missing include (Alex) Signed-off-by: Le Ma <le.ma@amd.com> Reviewed-by: Hawking Zhang <hawking.zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-28drm/amd: correct "_LENTH" mispelling in constantWambui Karuga
Correct the "_LENTH" mispelling in the AMDGPU_MAX_TIMEOUT_PARAM_LENGTH constant. Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-25drm/amdgpu: Move amdgpu_ras_recovery_init to after SMU ready.Andrey Grodzovsky
For Arcturus the I2C traffic is done through SMU tables and so we must postpone RAS recovery init to after they are ready which is in amdgpu_device_ip_hw_init_phase2. Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Guchun Chen <guchun.chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-17drm/amdgpu: add a generic fb accessing helper function(v3)Tianci.Yin
add a generic helper function for accessing framebuffer via MMIO Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Luben Tuikov <luben.tuikov@amd.com> Signed-off-by: Tianci.Yin <tianci.yin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-15drm/amdgpu: move gpu reset out of amdgpu_device_suspendAlex Deucher
Move it into the caller. There are cases were we don't want it. We need it for hibernation, but we don't need it for runtime pm, so drop it for runtime pm. Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-15drm/amdgpu: move pci_save_state into suspend pathAlex Deucher
for amdgpu_device_suspend. This follows the logic in the resume path. Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-15drm/amdgpu: Fix tdr3 could hang with slow compute issueEmily Deng
When index is 1, need to set compute ring timeout for sriov and passthrough. Signed-off-by: Emily Deng <Emily.Deng@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-07drm/amdgpu: move amdgpu_device_get_job_timeout_settingsAlex Deucher
It's only used in amdgpu_device.c and the naming also reflects that. Move it there. Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-03drm/amdgpu: Iterate through DRM connectors correctlyLyude Paul
Currently, every single piece of code in amdgpu that loops through connectors does it incorrectly and doesn't use the proper list iteration helpers, drm_connector_list_iter_begin() and drm_connector_list_iter_end(). Yeesh. So, do that. Cc: Juston Li <juston.li@intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Harry Wentland <hwentlan@amd.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-03drm/amd/amdgpu:Fix compute ring unable to detect hang.Jesse Zhang
When compute fence did not signal, compute ring cannot detect hardware hang because its timeout value is set to be infinite by default. In SR-IOV and passthrough mode, if user does not declare custome timeout value for compute ring, then use gfx ring timeout value as default. So that when there is a ture hardware hang, compute ring can detect it. Signed-off-by: Jesse Zhang <zhexi.zhang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-03drm/amdgpu/discovery: get gpu info from ip discovery tableXiaojie Yuan
except soc_bounding_box which is not integrated in discovery table yet Signed-off-by: Xiaojie Yuan <xiaojie.yuan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-16drm/amd/powerplay: properly set mp1 state for SW SMU suspend/reset routineEvan Quan
Set mp1 state properly for SW SMU suspend/reset routine. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-16drm/amdgpu: remove needless usage of #ifdefShirish S
define sched_policy in case CONFIG_HSA_AMD is not enabled, with this there is no need to check for CONFIG_HSA_AMD else where in driver code. Suggested-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Shirish S <shirish.s@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-16drm/amdgpu: fix build error without CONFIG_HSA_AMDShirish S
If CONFIG_HSA_AMD is not set, build fails: drivers/gpu/drm/amd/amdgpu/amdgpu_device.o: In function `amdgpu_device_ip_early_init': drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:1626: undefined reference to `sched_policy' Use CONFIG_HSA_AMD to guard this. Fixes: 1abb680ad371 ("drm/amdgpu: disable gfxoff while use no H/W scheduling policy") Signed-off-by: Shirish S <shirish.s@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-16drm/amdgpu: disable gfxoff while use no H/W scheduling policyHuang Rui
While gfxoff is enabled, the mmVM_XXX registers will be 0xfffffff while the GFX is in "off" state. KFD queue creattion doesn't use ring based method, so it will trigger a VM fault. Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-16drm/amdgpu: Add a kernel parameter for specifying the asic typeYong Zhao
As more and more new asics start to reuse the old device IDs before launch, there is a need to quickly override the existing asic type corresponding to the reused device ID through a kernel parameter. With this, engineers no longer need to rely on local hack patches, facilitating cooperation across teams. Signed-off-by: Yong Zhao <Yong.Zhao@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-13drm/amdgpu: move the call of ras recovery_init and bad page reserve to ↵Tao Zhou
proper place ras recovery_init should be called after ttm init, bad page reserve should be put in front of gpu reset since i2c may be unstable during gpu reset. add cleanup for recovery_init and recovery_fini v2: add more comment and print. remove cancel_work_sync in recovery_init. Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Guchun Chen <guchun.chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-13drm/amdkfd: Query kfd device info by CHIP id instead of pci device idYong Zhao
This optimizes out the pci device id usage in KFD and makes the code more maintainable. Signed-off-by: Yong Zhao <Yong.Zhao@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-13dmr/amdgpu: Add system auto reboot to RAS.Andrey Grodzovsky
In case of RAS error allow user configure auto system reboot through ras_ctrl. This is also part of the temproray work around for the RAS hang problem. v4: Use latest kernel API for disk sync. Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-13drm/amdgpu: Avoid HW GPU reset for RAS.Andrey Grodzovsky
Problem: Under certain conditions, when some IP bocks take a RAS error, we can get into a situation where a GPU reset is not possible due to issues in RAS in SMU/PSP. Temporary fix until proper solution in PSP/SMU is ready: When uncorrectable error happens the DF will unconditionally broadcast error event packets to all its clients/slave upon receiving fatal error event and freeze all its outbound queues, err_event_athub interrupt will be triggered. In such case and we use this interrupt to issue GPU reset. THe GPU reset code is modified for such case to avoid HW reset, only stops schedulers, deatches all in progress and not yet scheduled job's fences, set error code on them and signals. Also reject any new incoming job submissions from user space. All this is done to notify the applications of the problem. v2: Extract amdgpu_amdkfd_pre/post_reset from amdgpu_device_lock/unlock_adev Move amdgpu_job_stop_all_jobs_on_sched to amdgpu_job.c Remove print param from amdgpu_ras_query_error_count v3: Update based on prevoius bug fixing patch to properly call amdgpu_amdkfd_pre_reset for other XGMI hive memebers. Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-13drm/amdgpu: Fix bugs in amdgpu_device_gpu_recover in XGMI case.Andrey Grodzovsky
Issue 1: In XGMI case amdgpu_device_lock_adev for other devices in hive was called to late, after access to their repsective schedulers. So relocate the lock to the begining of accessing the other devs. Issue 2: Using amdgpu_device_ip_need_full_reset to switch the device list from all devices in hive to the single 'master' device who owns this reset call is wrong because when stopping schedulers we iterate all the devices in hive but when restarting we will only reactivate the 'master' device. Also, in case amdgpu_device_pre_asic_reset conlcudes that full reset IS needed we then have to stop schedulers for all devices in hive and not only the 'master' but with amdgpu_device_ip_need_full_reset we already missed the opprotunity do to so. So just remove this logic and always stop and start all schedulers for all devices in hive. Also minor cleanup and print fix. v4: Minor coding style fix. Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-30drm/amdgpu: Handle job is NULL use case in amdgpu_device_gpu_recoverAndrey Grodzovsky
This should be checked at all places job is accessed. Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-29drm/amdgpu: Enable DC on RenoirRoman Li
Enable DC support for renoir. Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Roman Li <Roman.Li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-29drm/amdgpu: introduce vram lost for reset (v2)Monk Liu
for SOC15/vega10 the BACO reset & mode1 would introduce vram lost in high end address range, current kmd's vram lost checking cannot catch it since it only check very ahead visible frame buffer v2: cover NV as well Signed-off-by: Monk Liu <Monk.Liu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-15drm/amdgpu: Use new mode2 reset interface for RV.Andrey Grodzovsky
Integrate the mode2 reset into rest sequence. v2: Check ppfuncs pointer for NULL Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-12drm/amdgpu: add renoir support for gpu_info and ip block settingHuang Rui
This patch adds renoir support for gpu_info firmware and ip block setting. Acked-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-12drm/amdgpu: add renoir asic_type enumHuang Rui
This patch adds renoir to amd_asic_type enum and amdgpu_asic_name[]. Acked-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-09drm/amdgpu: remove RREG64/WREG64Tao Zhou
atomic 64 bits REG operations are useless currently Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-09drm/amdgpu: replace readq/writeq with atomic64 operationsTao Zhou
what we really want is a read or write that is guaranteed to be 64 bits at a time, atomic64 operations are supported on all architectures Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-06drm/amdgpu: Fix GPU reset crash regression.Andrey Grodzovsky
amdgpu_ip_block.status.hw for GMC wasn't set to false on suspend during GPU reset and so on resume gmc_v9_0_resume wasn't called. Caused by 'drm/amdgpu: fix double ucode load by PSP(v3)' Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-06drm/amdgpu: Fix panic during gpu resetxinhui pan
Clear the flag after hw suspend, otherwise it skips the corresponding hw resume. Signed-off-by: xinhui pan <xinhui.pan@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-02drm/amdgpu: Add nv12 DC ip blockLeo Li
Load DC and amdgpu display manager Signed-off-by: Leo Li <sunpeng.li@amd.com> Reviewed-by: Xiaojie Yuan <xiaojie.yuan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-02drm/amdgpu: set asic family and ip blocks for navi12Xiaojie Yuan
same with navi10 Signed-off-by: Xiaojie Yuan <xiaojie.yuan@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-02drm/amdgpu: add gpu_info firmware for navi12Xiaojie Yuan
gpu_info firmare store asic configuration details. Signed-off-by: Xiaojie Yuan <xiaojie.yuan@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-02drm/amdgpu: add navi12 asic typeXiaojie Yuan
Add asic type. Signed-off-by: Xiaojie Yuan <xiaojie.yuan@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-02drm/amdgpu: fix double ucode load by PSP(v3)Monk Liu
previously the ucode loading of PSP was repreated, one executed in phase_1 init/re-init/resume and the other in fw_loading routine Avoid this double loading by clearing ip_blocks.status.hw in suspend or reset prior to the FW loading and any block's hw_init/resume v2: still do the smu fw loading since it is needed by bare-metal v3: drop the change in reinit_early_sriov, just clear all block's status.hw in the head place and set the status.hw after hw_init done is enough Signed-off-by: Monk Liu <Monk.Liu@amd.com> Reviewed-by: Emily Deng <Emily.Deng@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-02drm/amdgpu: cleanup vega10 SRIOV code pathMonk Liu
we can simplify all those unnecessary function under SRIOV for vega10 since: 1) PSP L1 policy is by force enabled in SRIOV 2) original logic always set all flags which make itself a dummy step besides, 1) the ih_doorbell_range set should also be skipped for VEGA10 SRIOV. 2) the gfx_common registers should also be skipped for VEGA10 SRIOV. Signed-off-by: Monk Liu <Monk.Liu@amd.com> Reviewed-by: Emily Deng <Emily.Deng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-31drm/amdgpu: add RREG64/WREG64(_PCIE) operationsTao Zhou
add 64 bits register access functions v2: implement 64 bit functions in low level Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Dennis Li <dennis.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-30drm/amdgpu: put the SMC into the proper state on reset/unloadAlex Deucher
When doing a GPU reset or unloading the driver, we need to put the SMU into the apprpriate state for the re-init after the reset or unload to reliably work. I don't think this is necessary for BACO because the SMU actually controls the BACO state to it needs to be active. For suspend (S3), the asic is put into D3 so the SMU would be powered down so I don't think we need to put the SMU into any special state. Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit (git 2.34.1) at 2025-08-02 12:56:07 +0000