summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd/display/amdgpu_dm
AgeCommit message (Collapse)Author
2025-04-07drm/amd/display: HDCP Locality check using DMUB Fused IODominik Kaszewski
[Why] HDCP locality check has strict timing requirements, currently broken due to reliance on msleep which does not guarantee accuracy. The PR moves the write-poll-read sequence into DMUB using new generic Fused IO interface, where the timing accuracy is greatly improved. New flow is enabled using DCN resource capability bit (none for now), or using a debug flag. [How] * Extended mod_hdcp_config with new function for requesting DMUB to execute a sequence of fused I2C/AUX commands and synchronously wait until an outbox reply arrives or a timeout expires. * If the timeout expires, send an abort to DMUB. * Update HDCP to use the DMUB for locality check if supported. * Add DC_HDCP_LC_FORCE_FW_ENABLE and DC_HDCP_LC_ENABLE_SW_FALLBACK. * Make the first enable new flow regardless of resource capabilities. * Make the second enable fallback to old SW flow. * Clean up makefile source file listings for easier updates. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Dominik Kaszewski <dominik.kaszewski@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-07drm/amd/display: Optimize custom brightness curveMario Limonciello
[Why] When BIOS includes a lot of custom brightness data points, walking the entire list can be time consuming. This is most noticed when dragging a power slider. The "higher" values are "slower" to drag around. [How] Move custom brightness calculation loop into a static function. Before starting the loop check the "half way" data point to see how it compares to the input. If greater than the half way data point use that as the starting point instead. Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-07drm/amd/display: Do Not Consider DSC if Valid Config Not FoundFangzhi Zuo
[why] In the mode validation, mst dsc is considered for bw calculation after common dsc config is determined. Currently it considered common dsc config is found if max and min target bpp are non zero which is not accurate. Invalid max and min target bpp values would not get max_kbps and min_kbps calculated, leading to falsefully pass a mode that does not have valid dsc parameters available. [how] Use the return value of decide_dsc_bandwidth_range() to determine whether valid dsc common config is found or not. Prune out modes that do not have valid common dsc config determined. Reviewed-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-07drm/amd/display: use drm_warn instead of DRM_WARNAurabindo Pillai
drm_warn prints the drm device instance which is helpful when debugging multi gpu issues Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-07drm/amd/display: use drm_info instead of DRM_INFOAurabindo Pillai
drm_info prints the drm device instance which is helpful when debugging multi gpu issues Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-07drm/amd/display: convert more DRM_ERROR to drm_errAurabindo Pillai
prefer drm_err instead of DRM_ERROR since the former prints the associated DRM device, which is helpful when debugging multi-gpu use cases. Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-07drm/amd/display: use drm_err in create_validate_stream_for_sink()Aurabindo Pillai
make the drm device available in create_validate_stream_for_sink() so that drm_err() can be used Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-07drm/amd/display: use drm_err in hpd rx offloadAurabindo Pillai
add amdgpu_device pointer to data associated with the work struct such that hpd handlers has access to the drm device for use with drm_err() Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-07drm/amd/display: convert DRM_ERROR to drm_err in hpd_rx_irq_create_workqueue()Aurabindo Pillai
pass in a pointer to amdgpu_device directly to the function. Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-07drm/amd/display: add proper error message for vblank initSaleemkhan Jamadar
v1 - DRM_ERROR to drm_err (Mario) Update message to identifiy the vblank initialization fail case Signed-off-by: Saleemkhan Jamadar <saleemkhan.jamadar@amd.com> Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-07drm/amd/display: add proper error message for vblank initSaleemkhan Jamadar
v1 - DRM_ERROR to dev_err (Mario) Update message to identifiy the vblank initialization fail case Signed-off-by: Saleemkhan Jamadar <saleemkhan.jamadar@amd.com> Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-07drm/amd/display: Add HP Elitebook 645 to the quirk list for eDP on DP1Mario Limonciello
[Why] HP Elitebook 645 has DP0 and DP1 swapped. [How] Add HP Elitebook 645 to DP0/DP1 swap quirk list. Cc: stable@vger.kernel.org Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3701 Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-07drm/amd/display: Add HP Probook 445 and 465 to the quirk list for eDP on DP1Mario Limonciello
[Why] HP Probook 445 and 465 has DP0 and DP1 swapped. [How] Add HP Probook 445 and 465 to DP0/DP1 swap quirk list. Cc: stable@vger.kernel.org Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3995 Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Anson Tsao <anson.tsao@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-07drm/amd/display: Do not enable Replay and PSR while VRR is on in ↵Tom Chung
amdgpu_dm_commit_planes() [Why] Replay and PSR will cause some video corruption while VRR is enabled. [How] Do not enable the Replay and PSR while VRR is active in amdgpu_dm_enable_self_refresh(). Fixes: 67edb81d6e9a ("drm/amd/display: Disable replay and psr while VRR is enabled") Reviewed-by: Sun peng Li <sunpeng.li@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2025-04-05Merge tag 'drm-next-2025-04-05' of https://gitlab.freedesktop.org/drm/kernelLinus Torvalds
Pull drm fixes from Dave Airlie: "Weekly fixes, mostly from the end of last week, this week was very quiet, maybe you scared everyone away. It's mostly amdgpu, and xe, with some i915, adp and bridge bits, since I think this is overly quiet I'd expect rc2 to be a bit more lively. bridge: - tda998x: Select CONFIG_DRM_KMS_HELPER amdgpu: - Guard against potential division by 0 in fan code - Zero RPM support for SMU 14.0.2 - Properly handle SI and CIK support being disabled - PSR fixes - DML2 fixes - DP Link training fix - Vblank fixes - RAS fixes - Partitioning fix - SDMA fix - SMU 13.0.x fixes - Rom fetching fix - MES fixes - Queue reset fix xe: - Fix NULL pointer dereference on error path - Add missing HW workaround for BMG - Fix survivability mode not triggering - Fix build warning when DRM_FBDEV_EMULATION is not set i915: - Bounds check for scalers in DSC prefill latency computation - Fix build by adding a missing include adp: - Fix error handling in plane setup" # -----BEGIN PGP SIGNATURE----- * tag 'drm-next-2025-04-05' of https://gitlab.freedesktop.org/drm/kernel: (34 commits) drm/i2c: tda998x: select CONFIG_DRM_KMS_HELPER drm/amdgpu/gfx12: fix num_mec drm/amdgpu/gfx11: fix num_mec drm/amd/pm: Add gpu_metrics_v1_8 drm/amdgpu: Prefer shadow rom when available drm/amd/pm: Update smu metrics table for smu_v13_0_6 drm/amd/pm: Remove host limit metrics support Remove unnecessary firmware version check for gc v9_4_2 drm/amdgpu: stop unmapping MQD for kernel queues v3 Revert "drm/amdgpu/sdma_v4_4_2: update VM flush implementation for SDMA" drm/amdgpu: Parse all deferred errors with UMC aca handle drm/amdgpu: Update ta ras block drm/amdgpu: Add NPS2 to DPX compatible mode drm/amdgpu: Use correct gfx deferred error count drm/amd/display: Actually do immediate vblank disable drm/amd/display: prevent hang on link training fail Revert "drm/amd/display: dml2 soc dscclk use DPM table clk setting" drm/amd/display: Increase vblank offdelay for PSR panels drm/amd: Handle being compiled without SI or CIK support better drm/amd/pm: Add zero RPM enabled OD setting support for SMU14.0.2 ...
2025-04-01Merge tag 'driver-core-6.15-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updatesk from Greg KH: "Here is the big set of driver core updates for 6.15-rc1. Lots of stuff happened this development cycle, including: - kernfs scaling changes to make it even faster thanks to rcu - bin_attribute constify work in many subsystems - faux bus minor tweaks for the rust bindings - rust binding updates for driver core, pci, and platform busses, making more functionaliy available to rust drivers. These are all due to people actually trying to use the bindings that were in 6.14. - make Rafael and Danilo full co-maintainers of the driver core codebase - other minor fixes and updates" * tag 'driver-core-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (52 commits) rust: platform: require Send for Driver trait implementers rust: pci: require Send for Driver trait implementers rust: platform: impl Send + Sync for platform::Device rust: pci: impl Send + Sync for pci::Device rust: platform: fix unrestricted &mut platform::Device rust: pci: fix unrestricted &mut pci::Device rust: device: implement device context marker rust: pci: use to_result() in enable_device_mem() MAINTAINERS: driver core: mark Rafael and Danilo as co-maintainers rust/kernel/faux: mark Registration methods inline driver core: faux: only create the device if probe() succeeds rust/faux: Add missing parent argument to Registration::new() rust/faux: Drop #[repr(transparent)] from faux::Registration rust: io: fix devres test with new io accessor functions rust: io: rename `io::Io` accessors kernfs: Move dput() outside of the RCU section. efi: rci2: mark bin_attribute as __ro_after_init rapidio: constify 'struct bin_attribute' firmware: qemu_fw_cfg: constify 'struct bin_attribute' powerpc/perf/hv-24x7: Constify 'struct bin_attribute' ...
2025-03-26drm/amd/display: Actually do immediate vblank disableLeo Li
[Why] The `vblank_config.offdelay` field follows the same semantics as the `drm_vblank_offdelay` parameter. Setting it to 0 will never disable vblank. [How] Set `offdelay` to a positive number. Fixes: e45b6716de4b ("drm/amd/display: use a more lax vblank enable policy for DCN35+") Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2025-03-26drm/amd/display: Increase vblank offdelay for PSR panelsLeo Li
[Why] Depending on when the HW latching event (vupdate) of double-buffered registers happen relative to the PSR SDP (signals panel psr enter/exit) deadline, and how bad the Panel clock has drifted since the last ALPM off event, there can be up to 3 frames of delay between sending the PSR exit cmd to DMUB fw, and when the panel starts displaying live frames. This can manifest as micro-stuttering when userspace commit patterns cause rapid toggling of the DRM vblank counter, since PSR enter/exit is hooked up to DRM vblank disable/enable respectively. In the ideal world, the panel should present the live frame immediately on PSR exit cmd. But due to HW design and PSR limitations, immediate exit can only happen by chance, when: 1. PSR exit cmd is ack'd by FW before HW latching (vupdate) event, and 2. Panel's SDP deadline -- determined by it's PSR Start Delay in DPCD 71h -- is after the vupdate event. The PSR exit SDP can then be sent immediately after HW latches. Otherwise, we have to wait 1 frame. And 3. There is negligible drift between the panel's clock and source clock. Otherwise, there can be up to 1 frame of drift. Note that this delay is not expected with Panel Replay. [How] Since PSR power savings can be quite substantial, and there are a lot of systems in the wild with PSR panels, It'll be nice to have a middle ground that balances user experience with power savings. A simple way to achieve this is by extending the vblank offdelay, such that additional PSR exit delays will be less perceivable. We can set: 20/100 * offdelay_ms = 3_frames_ms => offdelay_ms = 5 * 3_frames_ms This ensures that `3_frames_ms` will only be experienced as a 20% delay on top how long the panel has been static, and thus make the delay less perceivable. If this ends up being too high of a percentage, it can be dropped further in a future change. Fixes: 537ef0f88897 ("drm/amd/display: use new vblank enable policy for DCN35+") Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2025-03-18drm/amd/display: Fix message for support_edp0_on_dp1Yilin Chen
[WHY] The info message was wrong when support_edp0_on_dp1 is enabled [HOW] Use correct info message for support_edp0_on_dp1 Fixes: f6d17270d18a ("drm/amd/display: add a quirk to enable eDP0 on DP1") Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Yilin Chen <Yilin.Chen@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-10drm/amd/display: Drop unnecessary ret variable for enable_assr()Mario Limonciello
[Why] enable_assr() has a res variable that only is changed in one block with no cleanup necessary. [How] Remove variable and return early from failure cases. Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-10drm/amd/display: Add scoped mutexes for amdgpu_dm_dhcpMario Limonciello
[Why] Guards automatically release mutex when it goes out of scope making code easier to follow. [How] Replace all use of mutex_lock()/mutex_unlock() with guard(mutex). Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-10drm/amd/display: Fix slab-use-after-free on hdcp_workMario Limonciello
[Why] A slab-use-after-free is reported when HDCP is destroyed but the property_validate_dwork queue is still running. [How] Cancel the delayed work when destroying workqueue. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4006 Fixes: da3fd7ac0bcf ("drm/amd/display: Update CP property based on HW query") Cc: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-10drm/amd/display: Add and use new dm_prepare_suspend() callbackMario Limonciello
[Why] The displays currently don't get turned off until after other IP blocks have been suspended. However turning off the displays first gives a very visible response that the system is on it's way down. [How] Turn off displays in a prepare_suspend() callback instead when possible. This will help for suspend and hibernate sequences. The shutdown sequence however will not call prepare() so check whether the state has been already saved to decide what to do. Acked-by: Wayne Lin <Wayne.Lin@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-10drm/amd/display: Restore correct backlight brightness after a GPU resetMario Limonciello
[Why] GPU reset will attempt to restore cached state, but brightness doesn't get restored. It will come back at 100% brightness, but userspace thinks it's the previous value. [How] When running resume sequence if GPU is in reset restore brightness to previous value. Acked-by: Wayne Lin <Wayne.Lin@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-10drm/amd/display: fix default brightnessMario Limonciello
[Why] To avoid flickering during boot default brightness level set by BIOS should be maintained for as much of the boot as feasible. commit 2fe87f54abdc ("drm/amd/display: Set default brightness according to ACPI") attempted to set the right levels for AC vs DC, but brightness still got reset to maximum level in initialization code for setup_backlight_device(). [How] Remove the hardcoded initialization in setup_backlight_device() and instead program brightness value to match BIOS (AC or DC). This avoids a brightness flicker from kernel changing the value. Userspace may however still change it during boot. Fixes: 2fe87f54abdc ("drm/amd/display: Set default brightness according to ACPI") Acked-by: Wayne Lin <Wayne.Lin@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-10drm/amd/display: Disable unneeded hpd interrupts during dm_initLeo Li
[Why] It seems HPD interrupts are enabled by default for all connectors, even if the hpd source isn't valid. An eDP for example, does not have a valid hpd source (but does have a valid hpdrx source; see construct_phy()). Thus, eDPs should have their hpd interrupt disabled. In the past, this wasn't really an issue. Although the driver gets interrupted, then acks by writing to hw registers, there weren't any subscribed handlers that did anything meaningful (see register_hpd_handlers()). But things changed with the introduction of IPS. s2idle requires that the driver allows IPS for DMUB fw to put hw to sleep. Since register access requires hw to be awake, the driver will block IPS entry to do so. And no IPS means no hw sleep during s2idle. This was the observation on DCN35 systems with an eDP. During suspend, the eDP toggled its hpd pin as part of the panel power down sequence. The driver was then interrupted, and acked by writing to registers, blocking IPS entry. [How] Since DC marks eDP connections as having invalid hpd sources (see construct_phy()), DM should disable them at the hw level. Do so in amdgpu_dm_hpd_init() by disabling all hpd ints first, then selectively enabling ones for connectors that have valid hpd sources. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-10drm/amd/display: allow 256B DCC max compressed block sizes on gfx12Marek Olšák
The hw supports it. Signed-off-by: Marek Olšák <marek.olsak@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-10Merge 6.14-rc6 into driver-core-nextGreg Kroah-Hartman
We need the driver core fix in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-03-10Merge tag 'amd-drm-next-6.15-2025-03-07' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-next amdgpu: - Fix spelling typos - RAS updates - VCN 5.0.1 updates - SubVP fixes - DCN 4.0.1 fixes - MSO DPCD fixes - DIO encoder refactor - PCON fixes - Misc cleanups - DMCUB fixes - USB4 DP fixes - DM cleanups - Backlight cleanups and fixes - Support platform backlight curves - Misc code cleanups - SMU 14 fixes - JPEG 4.0.3 reset updates - SR-IOV fixes - SVM fixes - GC 12 DCC fixes - DC DCE 6.x fix - Hiberation fix amdkfd: - Fix possible NULL pointer in queue validation - Remove unnecessary CP domain validation - SDMA queue reset support - Add per process flags radeon: - Fix spelling typos - RS400 hyperZ fix UAPI: - Add KFD per process flags for setting precision Proposed user space: https://github.com/ROCm/ROCR-Runtime/commit/2a64fa5e06e80e0af36df4ce0c76ae52eeec0a9d Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250307211051.1880472-1-alexander.deucher@amd.com
2025-03-07drm/amd: Keep display off while going into S4Mario Limonciello
When userspace invokes S4 the flow is: 1) amdgpu_pmops_prepare() 2) amdgpu_pmops_freeze() 3) Create hibernation image 4) amdgpu_pmops_thaw() 5) Write out image to disk 6) Turn off system Then on resume amdgpu_pmops_restore() is called. This flow has a problem that because amdgpu_pmops_thaw() is called it will call amdgpu_device_resume() which will resume all of the GPU. This includes turning the display hardware back on and discovering connectors again. This is an unexpected experience for the display to turn back on. Adjust the flow so that during the S4 sequence display hardware is not turned back on. Reported-by: Xaver Hugl <xaver.hugl@gmail.com> Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/2038 Cc: Muhammad Usama Anjum <usama.anjum@collabora.com> Tested-by: Muhammad Usama Anjum <usama.anjum@collabora.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Link: https://lore.kernel.org/r/20250306185124.44780-1-mario.limonciello@amd.com Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-07drm/amdgpu/display: Allow DCC for video formats on GFX12David Rosca
We advertise DCC as supported for NV12/P010 formats on GFX12, but it would fail on this check on atomic commit. Signed-off-by: David Rosca <david.rosca@amd.com> Reviewed-by: Ruijing Dong <ruijing.dong@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-05drm/amd/display: use drm_* instead of DRM_ in apply_edid_quirks()Aurabindo Pillai
drm_* macros are more helpful that DRM_* macros since the former indicates the associated DRM device that prints the error, which maybe helpful when debugging. Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-05drm/amd/display: Add workaround for a panelAurabindo Pillai
Implement w/a for a panel which requires 10s delay after link detect. Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-05drm/amd/display: Add a new dcdebugmask to allow turning off brightness curveMario Limonciello
Upgrading the kernel may cause some systems that were previously not using a firmware specified brightness curve to use one. In the event of problems with this curve (for example an interpolation error) add a new dcdebugmask value that can be used to turn it off. Also add an info message to show that custom brightness curves are currently in use. Reviewed-by: Alex Hung <alex.hung@amd.com> Link: https://lore.kernel.org/r/20250228185145.186319-6-mario.limonciello@amd.com Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-05drm/amd/display: Add support for custom brightness curveMario Limonciello
Some systems specify in the firmware a brightness curve that better reflects the characteristics of the panel used. This is done in the form of data points and matching luminance percentage. When converting a userspace requested brightness value use that curve to convert to a firmware intended brightness value. Reviewed-by: Alex Hung <alex.hung@amd.com> Link: https://lore.kernel.org/r/20250228185145.186319-5-mario.limonciello@amd.com Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-05drm/amd/display: Avoid operating on copies of backlight capsMario Limonciello
Making a copy of the backlight caps structure between uses is unnecessary. Refer to pointers to the same structure when using it. Reviewed-by: Alex Hung <alex.hung@amd.com> Link: https://lore.kernel.org/r/20250228185145.186319-4-mario.limonciello@amd.com Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-05drm/amd: Pass luminance data to amdgpu_dm_backlight_capsMario Limonciello
The ATIF method on some systems will provide a backlight curve. Pass this curve into amdgpu_dm add it to the structures. Reviewed-by: Alex Hung <alex.hung@amd.com> Link: https://lore.kernel.org/r/20250228185145.186319-3-mario.limonciello@amd.com Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-05drm/amd/display: Use drm_err() for handle_hpd_irq_helper()Mario Limonciello
drm_err() will show which device has the error. Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-05drm/amd/display: Use scoped guards for handle_hpd_irq_helper()Mario Limonciello
Scoped guards will release the mutex when they go out of scope. Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-05drm/amd/display: Use _free() macro for amdgpu_dm_update_connector_after_detect()Mario Limonciello
By using a _free() macro multiple duplicated snippets of code to free the sink can be dropped. The sink will be released when leaving scope. Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-05drm/amd/display: Use scoped guard for amdgpu_dm_update_connector_after_detect()Mario Limonciello
A scoped guard will release the mutex when it goes out of scope. Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-05drm/amd/display: Use _free(kfree) for dm_gpureset_commit_state()Mario Limonciello
Using a _free(kfree) macro drops the need for a goto statement as it will be freed when it goes out of scope. Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-05drm/amd/display: Change amdgpu_dm_irq_resume_*() to voidMario Limonciello
amdgpu_dm_irq_resume_early() and amdgpu_dm_irq_resume_late() don't have any error flows. Change the return type from integer to void. Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-05drm/amd/display: Change amdgpu_dm_irq_resume_*() to use drm_dbg()Mario Limonciello
drm_dbg() is helpful to show which device had the debug statement. Adjust to using this instead for debug messages. Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-05drm/amd/display: Use scoped guard for dm_resume()Mario Limonciello
Scoped guards will release the mutex when they go out of scope. Adjust the code to use these instead. Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-05drm/amd/display: Use drm_err() instead of DRM_ERROR in dm_resume()Mario Limonciello
drm_err() is helpful to show which device had the error. Adjust to using this instead for error messages. Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-05drm/amd/display: Use _free() macro for amdgpu_dm_commit_zero_streams()Mario Limonciello
All cases except a failure to create a copy of the current context will call dc_state_release() on the copied context. Use a _free() macro to free the context and then adjust the error handling flow to drop the unnecessary use of goto statements. Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-05drm/amd/display: Catch failures for amdgpu_dm_commit_zero_streams()Mario Limonciello
amdgpu_dm_commit_zero_streams() returns a DC error code that isn't checked. Add an explicit check to this and fail dm_suspend() if it is not DC_OK. Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-05drm/amd/display: Drop `ret` variable from dm_suspend()Mario Limonciello
The `ret` variable in dm_suspend() doesn't get set and is just used to return 0. Drop the needless declaration. Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-05drm/amd/display: Change amdgpu_dm_irq_suspend() to voidMario Limonciello
amdgpu_dm_irq_suspend() doesn't have any error flows and always returns zero. Change the function to void. Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit (git 2.34.1) at 2025-07-24 21:07:49 +0000