summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd/display/dc/dcn10
AgeCommit message (Collapse)Author
2022-03-25drm/amd/display: Reduce stack sizeRodrigo Siqueira
Linux kernel enabled more compilation restrictions related to the stack size, which caused compilation failures in our code. This commit reduces the allocation size by allocating the required memory dynamically. Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-15drm/amd/display: Wait for hubp read line for PollockBecle Lee
[Why] Underflow occurred while hubp ret pipe read is idle and the second pipe is powered up and added. Flickering and underflow are only observed on Pollock. [How] Check the hubp ret pipe read prior to unlock pipes. Reviewed-by: Hersen Wu <hersenxs.wu@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Signed-off-by: Becle Lee <becle.lee@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-15drm/amd/display: Add pstate verification and recovery for DCN31Nicholas Kazlauskas
[Why] To debug when p-state is being blocked and avoid PMFW hangs when it does occur. [How] Re-use the DCN10 hardware sequencer by adding a new interface for verifying p-state high on the hubbub. The interface is mostly the same as the DCN10 interface, but the bit definitions have changed for the debug bus. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Eric Yang <Eric.Yang2@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-15drm/amd/display: move FPU code from dcn10 to dml/dcn10 folderMelissa Wen
FPU operations in dcn10 was already moved to dml folder via calcs code. However, dcn1_0_ip and dcn_1_0_soc with FPU componentd remains on dcn10. Following previous changes to isolate FPU, this patch creates dcn10_fpu files to isolate FPU-specific code and moves those structs to it. Signed-off-by: Melissa Wen <mwen@igalia.com> Acked-by: Alan Liu <HaoPing.Liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-02drm/amd/display: Modify plane removal sequence to avoid hangs.Dillon Varone
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Alan Liu <HaoPing.Liu@amd.com> Signed-off-by: Dillon Varone <dillon.varone@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-02drm/amd/display: Add frame alternate 3D & restrict HW packed on donglesDillon Varone
[WHY?] Some projectors support frame alternate 3D modes at 120Hz, but DAL3 does not create timings. Most active DP to HDMI dongles do not translate infoframes properly to use HW packing stereo mode. [HOW?] Create frame alternate 3D timings for displays that support it. Disable HW packing 3D mode on DP active dongles. Reviewed-by: Martin Leung <Martin.Leung@amd.com> Acked-by: Alan Liu <HaoPing.Liu@amd.com> Signed-off-by: Dillon Varone <dillon.varone@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-23drm/amd/display: Remove unused variableMaíra Canal
Remove the variable clamshell_closed from the function dcn10_align_pixel_clocks. This was pointed by clang with the following warning: drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_hw_sequencer.c:2063:7: warning: variable 'clamshell_closed' set but not used [-Wunused-but-set-variable] bool clamshell_closed = false; ^ Signed-off-by: Maíra Canal <maira.canal@usp.br> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-16drm/amd/display: Fix for dmub outbox notification enableMeenakshikumar Somasundaram
[Why] Currently driver enables dmub outbox notification before oubox ISR is registered. During boot scenario, sometimes dmub issues hpd outbox message before driver registers ISR and those messages are missed. [How] Enable dmub outbox notification after outbox ISR is registered. Also, restructured outbox enable code to call from dm layer and renamed APIs. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Jasdeep Dhillon <jdhillon@amd.com> Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-02drm/amd/display: add set dp lane settings to link_hwssWenjing Liu
[why] Factor set dp lane settings to link_hwss. v2: fix statement with no effect warning (Alex) Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-02drm/amd/display: revert "Reset fifo after enable otg"Zhan Liu
[Why] This change causes regression, that prevents some systems from lighting up internal displays. [How] Revert this patch until a new solution is ready. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Zhan Liu <Zhan.Liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-01-18drm/amd/display: Disabled seamless boots on DP and renamed ↵Jarif Aftab
power_down_display_on_boot [WHY] - We only ever want seamless boots on eDPs - The naming and logic did not match the context [HOW] - Removed unnecessary if statements - Renamed power_down_display_on_boot to seamless_boot_edp_requested and swapped the logic Reviewed-by: Martin Leung <Martin.Leung@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Jarif Aftab <jaraftab@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-01-07drm/amd/display: Fix underflow for fused display pipes caseYi-Ling Chen
[Why] Depend on res_pool->res_cap->num_timing_generator to query timing gernerator information, it would case underflow at the fused display pipes case. Due to the res_pool->res_cap->num_timing_generator records default timing generator resource built in driver, not the current chip. [How] Some ASICs would be fused display pipes less than the default setting. In dcnxx_resource_construct function, driver would obatin real timing generator count and store it into res_pool->timing_generator_count. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Yi-Ling Chen <Yi-Ling.Chen2@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-30drm/amd/display: access hpo dp link encoder only through link resourceWenjing Liu
[why] Update all accesses to use hpo dp link encoder through link resource only. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-30drm/amd/display: Added power down for DCN10Lai, Derek
[Why] The change of setting a timer callback on boot for 10 seconds is still working, just lacked power down for DCN10. [How] Added power down for DCN10. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Derek Lai <Derek.Lai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-13drm/amd/display: fix function scopesIsabella Basso
This turns previously global functions into static, thus removing compile-time warnings such as: warning: no previous prototype for 'get_highest_allowed_voltage_level' [-Wmissing-prototypes] 742 | unsigned int get_highest_allowed_voltage_level(uint32_t chip_family, uint32_t hw_internal_rev, uint32_t pci_revision_id) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ warning: no previous prototype for 'rv1_vbios_smu_send_msg_with_param' [-Wmissing-prototypes] 102 | int rv1_vbios_smu_send_msg_with_param(struct clk_mgr_internal *clk_mgr, unsigned int msg_id, unsigned int param) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Changes since v1: - As suggested by Rodrigo Siqueira: 1. Rewrite function signatures to make them more readable. 2. Get rid of unused functions in order to remove 'defined but not used' warnings. Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Isabella Basso <isabbasso@riseup.net> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-01drm/amd/display: add hdmi disable debug checkDale Zhao
[Why] Using the hdmi_disable option doesnt disable 6GB bandwidth [How] Add debug.hdmi20_disable flage when checking 6GB enable or not. Reviewed-by: Chris Park <Chris.Park@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Dale Zhao <dale.zhao@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-11-24drm/amd/display: Fixed DSC would not PG after removing DSC streamYi-Ling Chen
[WHY] Due to pass the wrong parameter down to the enable_stream_gating(), it would cause the DSC of the removing stream would not be PG. [HOW] To pass the correct parameter down th the enable_stream_gating(). Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Yi-Ling Chen <Yi-Ling.Chen2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-11-24drm/amd/display: Rename dcn_validate_bandwidth to dcn10_validate_bandwidthZhan Liu
[Why] Rename function name so it aligns with other resource function names being used by dcn10. [How] Rename function name for consistency. Reviewed-by: Ahmad Othman <Ahmad.Othman@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Zhan Liu <Zhan.Liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-11-22drm/amd/display: remove no need NULL check before kfreeBernard Zhao
This change is to cleanup the code a bit. Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Bernard Zhao <bernard@vivo.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-11-22drm/amd/display: fixed the DSC power off sequence during Driver PnPYi-Ling Chen
[WHY] After unloading driver, driver would not disable DSC function. At next loading driver, driver would power all DSC engines off. When driver powered the active DSC off, the screen would be gray until reprograming DSC relatived register correcntly. [HOW] 1. Remove DSC Power down code into init_pipes() 2. Depend on the OTG mapping information and DSC status to skip power off for the working DSC. Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Yi-Ling Chen <Yi-Ling.Chen2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-11-22drm/amd/display: Visual Confirm Bar Height Adjusthvanzyll
[What] This change allows adjustment to the Visual Confirm height border. [Why] Aids debugging and testing [How] Use the existing infrastructure to implement logic to draw borders Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Harry VanZyllDeJong <hvanzyll@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-11-22drm/amd/display: Reset fifo after enable otgXu, Jinze
[Why] In fast boot sequence, when change dispclk, otg is disabled but digfe is enabled. This may cause dig fifo error. [How] Reset dig fifo after enable otg. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: JinZe.Xu <JinZe.Xu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-11-17drm/amd/display: Add helper for blanking all dp displaysLeo (Hanghong) Ma
[Why & How] 1. The code to blank all dp display have been called many times, so add helpers in dc_link to make it more concise. 2. Add some check to fix the dmesg errors at boot and resume from S3 on dcn3.1 during DQE's promotion test. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Reviewed-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Leo (Hanghong) Ma <hanghong.ma@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-11-03drm/amd/display: Fix dcn10_log_hubp_states printf format stringAnson Jacob
Fix spacing issue for the format string. Addresses-Coverity-ID: 1446765: ("Invalid printf format string") Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Anson Jacob <Anson.Jacob@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: Defer GAMCOR and DSCL power down sequence to vupdateMichael Strauss
[WHY] Every other CM LUT power down sequence is deferred to next vupdate as memory powerdown updates immediately while selecting LUTs is double buffered. Previous update to defer LUT power down missed GAMCOR and DSCL, causing some visible flicker when entering/exiting fullscreen video playback. [HOW] Update dpp deferred update loop to check for valid DPPs in res_pool instead of referencing dcn_ip which turns out to not be populated during runtime. Move GAMCOR and DSCL powerdown to dpp deferred updates. Reviewed-by: Haonan Wang <Haonan.Wang2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Signed-off-by: Michael Strauss <michael.strauss@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: Align bw context with hw config when system resumeLewis Huang
[Why] When the vbios config and driver config are different, if we update clock to lower before call program_timing and program_pixel_clk, garbage appear. [How] Align bw context with hw config when system resume Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Signed-off-by: Lewis Huang <Lewis.Huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-19Revert "drm/amd/display: Add helper for blanking all dp displays"Agustin Gutierrez
This reverts commit 1445d967fb915156aed0e79ca80c239cb2d414ce. This patch introduced a couple of dmesg warnings, this is not a valid approach anymore. For this reason, we are reverting this patch, and we need to revert the workaround patch. v2: squash in unused variable removal (Alex) Cc: Hanghong Ma <hanghong.ma@amd.com> Cc: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-19drm/amd/display: Change initializer to single braceAnthony Koo
Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-06drm/amd/display: Add helper for blanking all dp displaysLeo (Hanghong) Ma
[Why & How] The codes to blank all dp display have been called many times, so add a helper in dc_link to make it more concise. Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Solomon Chiu <solomon.chiu@amd.com> Signed-off-by: Leo (Hanghong) Ma <hanghong.ma@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-04drm/amd/display: add cyan_skillfish display supportZhan Liu
[Why] add display related cyan_skillfish files in. makefile controlled by CONFIG_DRM_AMD_DC_DCN201 flag. v2: squash in clang fixes from Harry, Nathan v3: squash in missing CONFIG_DRM_AMD_DC check (Alex) Signed-off-by: Charlene Liu <charlene.liu@amd.com> Signed-off-by: Zhan Liu <zhan.liu@amd.com> Reviewed-by: Charlene Liu <charlene.liu@amd.com> Acked-by: Jun Lei <jun.lei@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-29drm/amd/display: Handle Y carry-over in VCP X.Y calculationGeorge Shen
[Why/How] Theoretically rare corner case where ceil(Y) results in rounding up to an integer. If this happens, the 1 should be carried over to the X value. Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-28drm/amd/display: Add an extra check for dcn10 OPTC data formatOliver Logush
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Signed-off-by: Oliver Logush <oliver.logush@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-28drm/amd/display: Don't enable AFMT for DP audio streamMichael Strauss
[WHY] AFMT is unused for DP audio, so powering it on for DP is unnecessary. [HOW] APG block should be powered down instead, however HW defaults to shutdown state when not enabled so no further work is required. Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Signed-off-by: Michael Strauss <michael.strauss@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-23drm/amd/display: Fix null pointer dereference for encodersJimmy Kizito
[Why] Links which are dynamically assigned link encoders have their link encoder set to NULL. [How] Check that a pointer to a link_encoder object is non-NULL before using it. Reviewed-by: Aric Cyr <aric.cyr@amd.com> Reviewed-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-23drm/amd/display: Fix B0 USB-C DP Alt modeLiu, Zhan
[Why] Starting from B0, along with RDPCSTX, RDPCSPIPE registers are also used. [How] Make sure RDPCSPIPE registers are programmed correctly. Reviewed-by: Charlene Liu <charlene.liu@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Zhan Liu <Zhan.Liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-14drm/amd/display: Add VPG and AFMT low power support for DCN3.1Michael Strauss
[WHY] Power down VPG and AFMT blocks when not in use [HOW] Create afmt31 and vpg31 structs and add necessary fields to reg list Reviewed-by: Eric Yang <eric.yang2@amd.com> Acked-by: Mikita Lipski <mikita.lipski@amd.com> Signed-off-by: Michael Strauss <michael.strauss@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-14drm/amd/display: Refine condition of cursor visibility for pipe-splitDale Zhao
[Why] In some scenarios like fullscreen game, major plane is scaled. Then if a upper layer owns the cursor, cursor is invisiable in the majority of the screen. [How] Instead assuming upper plane handles cursor, summing up upper split planes on the same layer. If whole upper plane covers current half/whole pipe plane, disable cursor. Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com> Acked-by: Mikita Lipski <mikita.lipski@amd.com> Signed-off-by: Dale Zhao <dale.zhao@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-14drm/amd/display: Fix dynamic link encoder access.Jimmy Kizito
[Why] Assuming DIG link encoders are statically mapped to links can cause system instability due to null pointer accesses. [How] - Add checks for non-null link encoder pointers before trying to access them. - When a hardware platform uses dynamic DIG assignment (i.e. resource function 'link_encs_assign' defined) and a link supports flexible mapping to DIGs, use the link_enc_cfg API to access the DIG assigned to a link or stream. Reviewed-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com> Acked-by: Mikita Lipski <mikita.lipski@amd.com> Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-14drm/amd/display: Add DPCD writes at key pointsLeo (Hanghong) Ma
This reverts commit "Revert "Add DPCD writes at key points" ". The following patch will fix the system hang issue. v2: squash in indentation warning fix Signed-off-by: Leo (Hanghong) Ma <hanghong.ma@amd.com> Acked-by: Mikita Lipski <mikita.lipski@amd.com> Reviewed-by: Aric Cyr <aric.cyr@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-01drm/amd/display: Initialize GSP1 SDP headerWyatt Wood
[Why + How] Initialize GSP1 SDP header for use in DMCUB FW. Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Wyatt Wood <wyatt.wood@amd.com> Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-01drm/amd/display: Add DP 2.0 SST DC SupportFangzhi Zuo
1. Retrieve 128/132b link cap. 2. 128/132b link training and payload allocation. 3. UHBR10 link rate support. [squash in warning fixes - Alex] Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-01drm/amd/display: Add DP 2.0 HPO Link EncoderFangzhi Zuo
HW Blocks: +--------+ +-----+ +------+ | OPTC | | HDA | | HUBP | +--------+ +-----+ +------+ | | | | | | HPO ====|==========|========|==== | | v | | | +-----+ | | | | APG | | | | +-----+ | | | | | | v v v | +---------------------+ | | HPO Stream Encoder | | +---------------------+ | | | v | +--------------------+ | | HPO Link Encoder | v +--------------------+ [squash in warning fixes - Alex] Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-01drm/amd/display: Add DP 2.0 HPO Stream EncoderFangzhi Zuo
HW Blocks: +--------+ +-----+ +------+ | OPTC | | HDA | | HUBP | +--------+ +-----+ +------+ | | | | | | HPO ====|==========|========|==== | | v | | | +-----+ | | | | APG | | | | +-----+ | | | | | v v v v +----------------------+ | HPO Stream Encoder | +----------------------+ [squash in warning fixes - Alex] Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-24drm/amd/display: Add Logging for HDMI color depth informationPraful Swarnakar
[Why] Recent HDMI2.0 HF1-1 V-Swing testing showed that logging deep color status helps in validation of testcase. [How] Add logging based on various color depths and pixel encoding formats. Signed-off-by: Praful Swarnakar <Praful.Swarnakar@amd.com> Reviewed-by: Hersen Wu <hersenwu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-11drm/display: fix possible null-pointer dereference in dcn10_set_clock()Tuo Li
The variable dc->clk_mgr is checked in: if (dc->clk_mgr && dc->clk_mgr->funcs->get_clock) This indicates dc->clk_mgr can be NULL. However, it is dereferenced in: if (!dc->clk_mgr->funcs->get_clock) To fix this null-pointer dereference, check dc->clk_mgr and the function pointer dc->clk_mgr->funcs->get_clock earlier, and return if one of them is NULL. Reported-by: TOTE Robot <oslab@tsinghua.edu.cn> Signed-off-by: Tuo Li <islituo@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-23drm/amd/display: Refine condition for cursor visibilityKrunoslav Kovac
[why] There's a special case where upper plane is not the main plane. If it owns the cursor, it will be invisible in the majority of the screen. [How] The condition for disabling cursor is changed: - check if upper viewport completely covers current. This was the previous change that doesn't handle all scenarios with pipe splitting. - if not, show the cursor only if it's not scaled or no upper pipe. Reviewed-by: Aric Cyr <aric.cyr@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-23drm/amd/display: Line Buffer changesNevenko Stupar
DCN 3x increased Line buffer size for DCHUB latency hiding, from 4 lines of 4K resolution lines to 5 lines of 4K resolution lines. All Line Buffer can be used as extended memory for P State change latency hiding. The maximum number of lines is increased to 32 lines. Finally, LB_MEMORY_CONFIG_1 (LB memory piece 1) and LB_MEMORY _CONFIG_2 (LB memory piece 2) are not affected, no change in size, only 3 pieces is affected, i.e., when all 3 pieces are used in both LB_MEMORY_CONFIG_0 and LB_MEMORY_CONFIG_3 (for 4:2:0) modes. Reviewed-by: Jun Lei <jun.lei@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Nevenko Stupar <Nevenko.Stupar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-23drm/amd/display: Fixed hardware power down bypass during headless bootJake Wang
[Why] During headless boot, DIG may be on which causes HW/SW discrepancies. To avoid this we power down hardware on boot if DIG is turned on. With introduction of multiple eDP, hardware power down is being bypassed under certain conditions. [How] Fixed hardware power down bypass, and ensured hardware will power down if DIG is on and seamless boot is not enabled. Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Jake Wang <haonan.wang2@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-21drm/amd/display: remove compbuf size waitDmytro Laktyushkin
This tends to take miliseconds in certain scenarios and we'd rather not wait that long. Due to how this interacts with det size update and locking waiting should not be necessary as compbuf updates before unlock. Add a watch for config error instead as that is something we actually do care about. Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-21drm/amd/display: log additional register state for debugJosip Pavic
[Why & How] Extend existing state collection functions to add some additional registers useful for debug, and add state collection function for DC hubbub Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Josip Pavic <Josip.Pavic@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit (git 2.34.1) at 2025-09-22 22:52:37 +0000