summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd/display/dmub/inc
AgeCommit message (Collapse)Author
2023-02-15drm/amd/display: temporary fix for page faultingAyush Gupta
This reverts a part of the commit 826e7ffaf079c72607bf3199d4e19730eaf8ca00 ("drm/amd/display: [FW Promotion] Release 0.0.153.0") Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Ayush Gupta<ayugupta@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-02-14drm/amd/display: Move DCN314 DOMAIN power control to DMCUBNicholas Kazlauskas
[Why] DOMAIN power gating control is now required to be done via firmware due to interlock with other power features. This is to avoid intermittent issues in the LB memories. [How] If the firmware supports the command then use the new firmware as the sequence can avoid potential display corruption issues. The command will be ignored on firmware that does not support DOMAIN power control and the pipes will remain always on - frequent PG cycling can cause the issue to occur on the old sequence, so we should avoid it. Reviewed-by: Hansen Dsouza <hansen.dsouza@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-02-08drm/amd/display: [FW Promotion] Release 0.0.153.0Anthony Koo
[Why&How] - Reduce reserved size from 9 to 8 dwords to reduce structure size and allow the union dmub_rb_cmd to fit into max 64-bytes cmd size Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-24drm/amd/display: Pass DSC slice height to PSR FWRobin Chen
[Why] When DSC is enabled, the PSRSU seletive update region must be multiple number of DSC slice height number. The original solution is to overwrite the SU Y granularity by DSC slice height in DAL driver. However, the size of the SU Y granularity variable only has 8 bytes and the DSC slice height may over the 8 bytes size. [How] Instead of overwriting the SU Y granularity value, add a new DSC slice height pararmeter and pass it to DMUB PSRSU FW. The PSRSU FW will refer to the DSC slice height value and extend the SU region. Reviewed-by: Dennis Chan <dennis.chan@amd.com> Reviewed-by: ChunTao Tso <chuntao.tso@amd.com> Acked-by: Alan Liu <HaoPing.Liu@amd.com> Signed-off-by: Robin Chen <robin.chen@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-24drm/amd/display: [FW Promotion] Release 0.0.150.0Anthony Koo
- Add comments to reserved bit Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Alan Liu <HaoPing.Liu@amd.com> Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-17drm/amd/display: Skip backlight control delay on external powered linksTony Tascioglu
[Why] When an eDP panel is powered externally from a different GPU, we can avoid waiting for hardware sequencing delays when switching the backlight on/off as the display backlight is no longer powered by the original source. [How] This commit extends the 'link_powered_externally' variable to allow bypassing hardware delays for additional backlight commands and force the backlight on/off when a link is powered by another GPU. Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com> Reviewed-by: Felipe Clark <felipe.clark@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Tony Tascioglu <tony.tascioglu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-17drm/amd/display: Optimize link power-down when link powered externallyTony Tascioglu
[Why] When an eDP panel is powered externally by a different GPU, we don't need to wait for hardware sequencing delays when powering down a link, as the display is not dependent on the GPU being powered down. [How] This commit adds a variable 'link_powered_externally' to indicate when a link is being powered by another GPU. Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com> Reviewed-by: Felipe Clark <felipe.clark@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Tony Tascioglu <tony.tascioglu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-13drm/amd/display: Update dmub header to match DMUBMustapha Ghaddar
[WHY] Last PR missed name of a struct to match in DMUB [HOW] Update the logic in dmub_cmh.h header Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com> Reviewed-by: Meenakshikumar Somasundaram <Meenakshikumar.Somasundaram@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Mustapha Ghaddar <mghaddar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-12-15drm/amd/display: Add DPIA NOTIFICATION logicMustapha Ghaddar
[WHY] Adding the new DPIA NOTIFY packets from DMUB As per the design with Cruise to account for 250ms response delay otherwise [HOW] Added th DPIA NOTIFY logic as per DMUB logic Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Jasdeep Dhillon <jdhillon@amd.com> Signed-off-by: Mustapha Ghaddar <mghaddar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-23drm/amd/display: Add margin on DRR vblank start for subvpAlvin Lee
[Description] - Add margin for HUBP "jitter" for SubVp + DRR case - Also do a min transition even if MPO is added on a non SubVP pipe (i.e. added on DRR pipe for SubVP + DRR) Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-15drm/amd/display: [FW Promotion] Release 0.0.143.0Anthony Koo
- New boot options to enable USB4 DP BW Allocation mode in DPIA Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-09drm/amd/display: Waiting for 1 frame to fix the flash issue on PSR1Ryan Lin
[Why] Needs more frames waiting before the PSR_Exit sending for the specific TCON. [How] Add relock_delay_frame_cnt to control how many frames waiting are needed before the PSR_Exit sending. The default value is 0. The Driver side can set this variable for specific TCONs. Reviewed-by: Robin Chen <robin.chen@amd.com> Acked-by: Alan Liu <HaoPing.Liu@amd.com> Signed-off-by: Ryan Lin <tsung-hua.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-01drm/amd/display: [FW Promotion] Release 0.0.141.0Anthony Koo
- Add flag as a status read back that indicates back to back flips detected during psr. Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-27drm/amd/display: Document part of the DMUB cmdAnthony Koo
Add a simple documentation in the dmub_cmd. Tested-by: Mark Broadworth <mark.broadworth@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-27drm/amd/display: Implement secure display on DCN21Alan Liu
[Why] Porting secure display feature from DCN10 to DCN21. Support single display for now and will extend to multiple displays. [How] - use workqueue to offload works for dmub or dmcu firmware - after receiving ROI update from userspace, set skip_frame_cnt to 1 - refactor amdgpu_dm_crtc_handle_crc_window_irq() - disable PSR before activating secure_display on a crtc - check if secure_display is activated before enabling psr - only work for single display for now. Tested-by: Mark Broadworth <mark.broadworth@amd.com> Reviewed-by: Wayne Lin <Wayne.Lin@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alan Liu <HaoPing.Liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-10drm/amd/display: Use set_vtotal_min_max to configure OTG VTOTALRodrigo Siqueira
In multiple parts of the DCN code, we write directly to the OTG_V_TOTAL_* registers in some OPTC functions. Let's avoid it by using the set_vtotal_min_max. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-10drm/amd/display: Display does not light up after S4 resumeMeenakshikumar Somasundaram
[Why] Dpia hpd interrupt processing is disabled when entering S4/S0i3 and would be reenabled after detection completes during resuming. Because, keeping hpd interrupts enabled during detection leads to multiple detections for the same hpd transition. There is a S4 case where dpia hpd interrupt is missed when driver is in transitioning from hpd interrupt processing disable to enable and the display does not light up. [How] - Added dmub inbox command DMUB_CMD__DPIA_HPD_INT_ENABLE to explicitly control dmub to issue dpia hpd interrupt or not. If dpia hpd interrupt is disabled, dmub will keep the hpd pending and post it once driver reenables dpia hpd interrupt or when querying with DMUB_CMD__QUERY_HPD_STATE. - Added dmub boot option dpia_hpd_int_enable_supported to notify dmub about whether DMUB_CMD__DPIA_HPD_INT_ENABLE command would be used. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Mustapha Ghaddar <Mustapha.Ghaddar@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-10drm/amd/display: Use the same cursor info across featuresMax Tseng
Since different features would need to update cursor registers, However, they would use different approaches. To unify varied methods, this refactor is implemented the same update cursor info method for current varied features. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Max Tseng <Max.Tseng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amd/display: Cursor Info Update refactorMax Tseng
Dc: cursor info update: phase 1: [Why] Different feature might need to update cursor info, but With different approaches. To unify this diversity problem, all features should use The same interface to update cursor. Reviewed-by: Reza Amini <reza.amini@amd.com> Acked-by: Jasdeep Dhillon <jdhillon@amd.com> Signed-off-by: Max Tseng <max.tseng@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-19drm/amd/display: [FW Promotion] Release 0.0.134.0Anthony Koo
- Handle pipe split case for SubVP: Pass in pipe split index for main and phantom pipes Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-29drm/amd/display: [FW Promotion] Release 0.0.132.0Anthony Koo
- Fix comment to indicate correct visual confirm option Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-29drm/amd/display: Add support for visual confirm colorLeo (Hanghong) Ma
[Why] We want to get the visual confirm color of the bottom-most pipe for test automation. [How] Save the visual confirm color to plane_state before program to MPC; Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Leo (Hanghong) Ma <hanghong.ma@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-25drm/amd/display: [FW Promotion] Release 0.0.130.0Anthony Koo
- For SubVP add scaling factor to allow firmware to calculate accurate line to start programming Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-25drm/amd/display: Add support for manual DMUB FAMS triggerAnthony Koo
- Add is_drr parameter to indicate DRR is enabled on the panel to determine whether SubVP MCLK switch logic should be enabled - Add DRR manual trigger in FW (instead of driver) because manual trigger programming triggers DRR update pending and can block SubVP MCLK switches from taking place Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-05drm/amd/display: Add basic infrastructure for enabling FAMSRodrigo Siqueira
We want to enable Firmware Assisted Memory (FAMS) Switching, but first, we need to add the required code infrastructure in DC before allowing it in amdgpu_dm. Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-05drm/amd/display: Add SubVP required codeAlvin Lee
This commit enables the SubVP feature. To achieve that, we need to: - Don't force p-state disallow on SubVP (can't block dummy p-state) - Send calculated watermark to DMCUB for SubVP - Adjust CAB mode message to PMFW - Add a proper locking sequence for SubVP - Various fixes to SubVP static analysis and determining SubVP config - Currently SubVP not supported with pipe split so merge all pipes before setting up SubVp Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by: Alan Liu <HaoPing.Liu@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-07drm/amd/display: [FW Promotion] Release 0.0.119.0Anthony Koo
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-03drm/amd/display: align dmub cmd header to latest dmub FW to support PSR-SUDavid Zhang
[why] PSR-SU is implemented in upstreamed dmub FW but not enabled on DM and DC. We'd add necessary and missing definitions in dmub cmd header to align w/ the up-to-date DMUB FW for PSR-SU support. [how] Add definitions and items below into dmub cmd header: - DMUB psr version enumeration for PSR-SU - dirty rectangle structure - psr debug flag of forcing full frame update - dmub command of updating dirty rectangle and cursor infor - dmub psr command type of setting sink vtotal in PSR active - dmub psr su debug flags structure - dmub cmd structure for - updating dirty rectangle - cursor infor - setting sink vtotal - dmub ringbuffer command items Signed-off-by: David Zhang <dingchen.zhang@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-03drm/amd/display: Add DMCUB source files and changes for DCN32/321Aurabindo Pillai
DMCUB is the display engine microcontroller which aids in modesetting and other display related features. Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-05-04drm/amd/display: [FW Promotion] Release 0.0.115.0Anthony Koo
- Add new cmd for querying HPD state Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-05-04drm/amd/display: Add Connection Manager boot option.Jimmy Kizito
[Why] Boot up behaviour may differ depending on the Connection Manager handling USB4 tunneling. [How] Send boot option to firmware to indicate Connection Manager. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-04-05drm/amd/display: [FW Promotion] Release 0.0.111.0Anthony Koo
- Add options to allow for configurable PHY options during PSR active state - Remove unused versioning and git hash Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-04-05drm/amd/display: Fix unused-but-set-variable warningAashish Sharma
Fix the kernel test robot warning below: drivers/gpu/drm/amd/amdgpu/../display/dmub/inc/dmub_cmd.h:2893:12: warning: variable 'temp' set but not used [-Wunused-but-set-variable] Replaced the assignment to the unused temp variable with READ_ONCE() macro to flush the writes. READ_ONCE() helps avoid the use of volatile and makes it obvious from the code that the read here is intentional. Also verified on x86 that the generated code is exactly the same as before. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Aashish Sharma <shraash@google.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-31drm/amd/display: [FW Promotion] Release 0.0.110.0Anthony Koo
- Revert save/restore PANEL_PWRSEQ_REF_DIV2 and other psr phy optimizations Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-25drm/amd/display: [FW Promotion] Release 0.0.109.0Anthony Koo
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-15drm/amd/display: [FW Promotion] Release 0.0.108.0Anthony Koo
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-15drm/amd/display: Add save/restore PANEL_PWRSEQ_REF_DIV2Charlene Liu
[why] DCN31 has this in zstate save/restore sequence. need for non_zstate supported ASIC [how] add this PANEL_PWRSEQ_REF_DIV2 to existing panel_cntl_hw_init structure. Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Signed-off-by: Charlene Liu <Charlene.Liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-15drm/amd/display: [FW Promotion] Release 0.0.107.0Anthony Koo
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Alan Liu <HaoPing.Liu@amd.com> Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-04drm/amd/display: [FW Promotion] Release 0.0.106.0Anthony Koo
Acked-by: Alan Liu <HaoPing.Liu@amd.com> Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-02drm/amd/display: Adding a dc_debug option and dmub setting to use PHY FSM ↵Shah Dharati
for PSR [Why] PSR Power on/off is done in PSR. Add a dc_debug option and dmub setting to use PHY implementation of this instead. [How] Add a dc_debug option and dmub setting to use PHY FSM Power up/down for PSR. Co-authored-by: Shah Dharati <dharati.shah@amd.com> Reviewed-by: Hansen Dsouza <hansen.dsouza@amd.com> Acked-by: Alan Liu <HaoPing.Liu@amd.com> Signed-off-by: Shah Dharati <dharati.shah@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-23drm/amd/display: add cable ID support for usb c connectorWenjing Liu
[how] Call to DMUB to retrieve usb c cable ID data from PD firmware. If cable id is retrieved from DMUB, skip reading cable ID from RX. Reviewed-by: George Shen <George.Shen@amd.com> Acked-by: Solomon Chiu <solomon.chiu@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-23drm/amd/display: Remove unused temp variableMaíra Canal
Remove unused temp variable from the dmub_rb_flush_pending function by using arithmetic to remove the loop. The -Wunused-but-set-variable warning was pointed out by Clang with the following warning: drivers/gpu/drm/amd/amdgpu/../display/dmub/inc/dmub_cmd.h:2921:12: warning: variable 'temp' set but not used [-Wunused-but-set-variable] uint64_t temp; ^ v2: squash in revert and comment update (Alex) Signed-off-by: Maíra Canal <maira.canal@usp.br> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-16drm/amd/display: [FW Promotion] Release 0.0.104.0Anthony Koo
Acked-by: Jasdeep Dhillon <jdhillon@amd.com> Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-07drm/amd/display: [FW Promotion] Release 0.0.103.0Anthony Koo
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Jasdeep Dhillon <jdhillon@amd.com> Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-02drm/amd/display: [FW Promotion] Release 0.0.102.0Anthony Koo
- Correct number of reserved bits in cmd_lock_hw - Extend bits of hw_lock_client to allow for more clients Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-01-25drm/amd/display: [FW Promotion] Release 0.0.101.0Anthony Koo
- Add Scr8 for GPINT messaging between driver and fw Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-01-18drm/amd/display: [FW Promotion] Release 0.0.100.0Anthony Koo
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-30drm/amd/display: [FW Promotion] Release 0.0.98Anthony Koo
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-14drm/amd/display: [FW Promotion] Release 0.0.97Anthony Koo
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-07drm/amd/display: Query DMCUB for dp alt statusNicholas Kazlauskas
[Why] To avoid hanging RDPCSPIPE when INTERCEPTB isn't set. DMCUB owns control of that bit so DMCUB should manage returning the information driver needs for link encoder control. [How] Add a new DMCUB command to return dp alt disable and dp4 information. Reviewed-by: Hansen Dsouza <hansen.dsouza@amd.com> Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit (git 2.34.1) at 2025-07-28 18:23:42 +0000