| Age | Commit message (Collapse) | Author |
|---|
|
Pass the phys_addr_t down through the call chain from the top instead of
passing a pgd_t * KVA. This moves the __pa() into
domain_setup_first_level() which is the first function to obtain the pgd
from the IOMMU page table in this call chain.
The SVA flow is also adjusted to get the pa of the mm->pgd.
iommput will move the __pa() into iommupt code, it never shares the KVA of
the page table with the driver.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/1-v3-dbbe6f7e7ae3+124ffe-vtd_prep_jgg@nvidia.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20250714045028.958850-4-baolu.lu@linux.intel.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The iotlb_sync_map iommu ops allows drivers to perform necessary cache
flushes when new mappings are established. For the Intel iommu driver,
this callback specifically serves two purposes:
- To flush caches when a second-stage page table is attached to a device
whose iommu is operating in caching mode (CAP_REG.CM==1).
- To explicitly flush internal write buffers to ensure updates to memory-
resident remapping structures are visible to hardware (CAP_REG.RWBF==1).
However, in scenarios where neither caching mode nor the RWBF flag is
active, the cache_tag_flush_range_np() helper, which is called in the
iotlb_sync_map path, effectively becomes a no-op.
Despite being a no-op, cache_tag_flush_range_np() involves iterating
through all cache tags of the iommu's attached to the domain, protected
by a spinlock. This unnecessary execution path introduces overhead,
leading to a measurable I/O performance regression. On systems with NVMes
under the same bridge, performance was observed to drop from approximately
~6150 MiB/s down to ~4985 MiB/s.
Introduce a flag in the dmar_domain structure. This flag will only be set
when iotlb_sync_map is required (i.e., when CM or RWBF is set). The
cache_tag_flush_range_np() is called only for domains where this flag is
set. This flag, once set, is immutable, given that there won't be mixed
configurations in real-world scenarios where some IOMMUs in a system
operate in caching mode while others do not. Theoretically, the
immutability of this flag does not impact functionality.
Reported-by: Ioanna Alifieraki <ioanna-maria.alifieraki@canonical.com>
Closes: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2115738
Link: https://lore.kernel.org/r/20250701171154.52435-1-ioanna-maria.alifieraki@canonical.com
Fixes: 129dab6e1286 ("iommu/vt-d: Use cache_tag_flush_range_np() in iotlb_sync_map")
Cc: stable@vger.kernel.org
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20250703031545.3378602-1-baolu.lu@linux.intel.com
Link: https://lore.kernel.org/r/20250714045028.958850-3-baolu.lu@linux.intel.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
iommu init hook is wrapped in CONFI_X86 and is a remnant of dmar.c when
it was a common code in "drivers/pci/dmar.c". This was added in commit
(9d5ce73a64be2 x86: intel-iommu: Convert detect_intel_iommu to use
iommu_init hook)
Now this is built only for x86. This config wrap could be removed.
Signed-off-by: Vineeth Pillai (Google) <vineeth@bitbyteword.org>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20250616131740.3499289-1-vineeth@bitbyteword.org
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20250714045028.958850-2-baolu.lu@linux.intel.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Add a new vEVENTQ type for VINTFs that are assigned to the user space.
Simply report the two 64-bit LVCMDQ_ERR_MAPs register values.
Link: https://patch.msgid.link/r/68161a980da41fa5022841209638aeff258557b5.1752126748.git.nicolinc@nvidia.com
Reviewed-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Pranjal Shrivastava <praan@google.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The CMDQV HW supports a user-space use for virtualization cases. It allows
the VM to issue guest-level TLBI or ATC_INV commands directly to the queue
and executes them without a VMEXIT, as HW will replace the VMID field in a
TLBI command and the SID field in an ATC_INV command with the preset VMID
and SID.
This is built upon the vIOMMU infrastructure by allowing VMM to allocate a
VINTF (as a vIOMMU object) and assign VCMDQs (HW QUEUE objs) to the VINTF.
So firstly, replace the standard vSMMU model with the VINTF implementation
but reuse the standard cache_invalidate op (for unsupported commands) and
the standard alloc_domain_nested op (for standard nested STE).
Each VINTF has two 64KB MMIO pages (128B per logical VCMDQ):
- Page0 (directly accessed by guest) has all the control and status bits.
- Page1 (trapped by VMM) has guest-owned queue memory location/size info.
VMM should trap the emulated VINTF0's page1 of the guest VM for the guest-
level VCMDQ location/size info and forward that to the kernel to translate
to a physical memory location to program the VCMDQ HW during an allocation
call. Then, it should mmap the assigned VINTF's page0 to the VINTF0 page0
of the guest VM. This allows the guest OS to read and write the guest-own
VINTF's page0 for direct control of the VCMDQ HW.
For ATC invalidation commands that hold an SID, it requires all devices to
register their virtual SIDs to the SID_MATCH registers and their physical
SIDs to the pairing SID_REPLACE registers, so that HW can use those as a
lookup table to replace those virtual SIDs with the correct physical SIDs.
Thus, implement the driver-allocated vDEVICE op with a tegra241_vintf_sid
structure to allocate SID_REPLACE and to program the SIDs accordingly.
This enables the HW accelerated feature for NVIDIA Grace CPU. Compared to
the standard SMMUv3 operating in the nested translation mode trapping CMDQ
for TLBI and ATC_INV commands, this gives a huge performance improvement:
70% to 90% reductions of invalidation time were measured by various DMA
unmap tests running in a guest OS.
Link: https://patch.msgid.link/r/fb0eab83f529440b6aa181798912a6f0afa21eb0.1752126748.git.nicolinc@nvidia.com
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Pranjal Shrivastava <praan@google.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
To simplify the mappings from global VCMDQs to VINTFs' LVCMDQs, the design
chose to do static allocations and mappings in the global reset function.
However, with the user-owned VINTF support, it exposes a security concern:
if user space VM only wants one LVCMDQ for a VINTF, statically mapping two
or more LVCMDQs creates a hidden VCMDQ that user space could DoS attack by
writing random stuff to overwhelm the kernel with unhandleable IRQs.
Thus, to support the user-owned VINTF feature, a LVCMDQ mapping has to be
done dynamically.
HW allows pre-assigning global VCMDQs in the CMDQ_ALLOC registers, without
finalizing the mappings by keeping CMDQV_CMDQ_ALLOCATED=0. So, add a pair
of map/unmap helper that simply sets/clears that bit.
For kernel-owned VINTF0, move LVCMDQ mappings to tegra241_vintf_hw_init(),
and the unmappings to tegra241_vintf_hw_deinit().
For user-owned VINTFs that will be added, the mappings/unmappings will be
on demand upon an LVCMDQ allocation from the user space.
However, the dynamic LVCMDQ mapping/unmapping can complicate the timing of
calling tegra241_vcmdq_hw_init/deinit(), which write LVCMDQ address space,
i.e. requiring LVCMDQ to be mapped. Highlight that with a note to the top
of either of them.
Link: https://patch.msgid.link/r/be115a8f75537632daf5995b3e583d8a76553fba.1752126748.git.nicolinc@nvidia.com
Acked-by: Pranjal Shrivastava <praan@google.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The current flow of tegra241_cmdqv_remove_vintf() is:
1. For each LVCMDQ, tegra241_vintf_remove_lvcmdq():
a. Disable the LVCMDQ HW
b. Release the LVCMDQ SW resource
2. For current VINTF, tegra241_vintf_hw_deinit():
c. Disable all LVCMDQ HWs
d. Disable VINTF HW
Obviously, the step 1.a and the step 2.c are redundant.
Since tegra241_vintf_hw_deinit() disables all of its LVCMDQ HWs, it could
simplify the flow in tegra241_cmdqv_remove_vintf() by calling that first:
1. For current VINTF, tegra241_vintf_hw_deinit():
a. Disable all LVCMDQ HWs
b. Disable VINTF HW
2. Release all LVCMDQ SW resources
Drop tegra241_vintf_remove_lvcmdq(), and move tegra241_vintf_free_lvcmdq()
as the new step 2.
Link: https://patch.msgid.link/r/86c97c8c4ee9ca192e7e7fa3007c10399d792ce6.1752126748.git.nicolinc@nvidia.com
Acked-by: Pranjal Shrivastava <praan@google.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
A vEVENT can be reported only from a threaded IRQ context. Change to using
request_threaded_irq to support that.
Link: https://patch.msgid.link/r/f160193980e3b273afbd1d9cfc3e360084c05ba6.1752126748.git.nicolinc@nvidia.com
Acked-by: Pranjal Shrivastava <praan@google.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
This will be used by Tegra241 CMDQV implementation to report a non-default
HW info data.
Link: https://patch.msgid.link/r/8a3bf5709358eb21aed2e8434534c30ecf83917c.1752126748.git.nicolinc@nvidia.com
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Pranjal Shrivastava <praan@google.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
An impl driver might want to allocate its own type of vIOMMU object or the
standard IOMMU_VIOMMU_TYPE_ARM_SMMUV3 by setting up its own SW/HW bits, as
the tegra241-cmdqv driver will add IOMMU_VIOMMU_TYPE_TEGRA241_CMDQV.
Add vsmmu_size/type and vsmmu_init to struct arm_smmu_impl_ops. Prioritize
them in arm_smmu_get_viommu_size() and arm_vsmmu_init().
Link: https://patch.msgid.link/r/375ac2b056764534bb7c10ecc4f34a0bae82b108.1752126748.git.nicolinc@nvidia.com
Reviewed-by: Pranjal Shrivastava <praan@google.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The iommu_hw_info can output via the out_data_type field the vendor data
type from a driver, but this only allows driver to report one data type.
Now, with SMMUv3 having a Tegra241 CMDQV implementation, it has two sets
of types and data structs to report.
One way to support that is to use the same type field bidirectionally.
Reuse the same field by adding an "in_data_type", allowing user space to
request for a specific type and to get the corresponding data.
For backward compatibility, since the ioctl handler has never checked an
input value, add an IOMMU_HW_INFO_FLAG_INPUT_TYPE to switch between the
old output-only field and the new bidirectional field.
Link: https://patch.msgid.link/r/887378a7167e1786d9d13cde0c36263ed61823d7.1752126748.git.nicolinc@nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Pranjal Shrivastava <praan@google.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The hw_info uAPI will support a bidirectional data_type field that can be
used as an input field for user space to request for a specific info data.
To prepare for the uAPI update, change the iommu layer first:
- Add a new IOMMU_HW_INFO_TYPE_DEFAULT as an input, for which driver can
output its only (or firstly) supported type
- Update the kdoc accordingly
- Roll out the type validation in the existing drivers
Link: https://patch.msgid.link/r/00f4a2d3d930721f61367014717b3ba2d1e82a81.1752126748.git.nicolinc@nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Pranjal Shrivastava <praan@google.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Extend the loopback test to a new mmap page.
Link: https://patch.msgid.link/r/b02b1220c955c3cf9ea5dd9fe9349ab1b4f8e20b.1752126748.git.nicolinc@nvidia.com
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Pranjal Shrivastava <praan@google.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
For vIOMMU passing through HW resources to user space (VMs), allowing a VM
to control the passed through HW directly by accessing hardware registers,
add an mmap infrastructure to map the physical MMIO pages to user space.
Maintain a maple tree per ictx as a translation table managing mmappable
regions, from an allocated for-user mmap offset to an iommufd_mmap struct,
where it stores the real physical address range for io_remap_pfn_range().
Keep track of the lifecycle of the mmappable region by taking refcount of
its owner, so as to enforce user space to unmap the region first before it
can destroy its owner object.
To allow an IOMMU driver to add and delete mmappable regions onto/from the
maple tree, add iommufd_viommu_alloc/destroy_mmap helpers.
Link: https://patch.msgid.link/r/9a888a326b12aa5fe940083eae1156304e210fe0.1752126748.git.nicolinc@nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Pranjal Shrivastava <praan@google.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Some simple tests for IOMMUFD_CMD_HW_QUEUE_ALLOC infrastructure covering
the new iommufd_hw_queue_depend/undepend() helpers.
Link: https://patch.msgid.link/r/e8a194d187d7ef445f43e4a3c04fb39472050afd.1752126748.git.nicolinc@nvidia.com
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Pranjal Shrivastava <praan@google.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
NVIDIA Virtual Command Queue is one of the iommufd users exposing vIOMMU
features to user space VMs. Its hardware has a strict rule when mapping
and unmapping multiple global CMDQVs to/from a VM-owned VINTF, requiring
mappings in ascending order and unmappings in descending order.
The tegra241-cmdqv driver can apply the rule for a mapping in the LVCMDQ
allocation handler. However, it can't do the same for an unmapping since
user space could start random destroy calls breaking the rule, while the
destroy op in the driver level can't reject a destroy call as it returns
void.
Add iommufd_hw_queue_depend/undepend for-driver helpers, allowing LVCMDQ
allocator to refcount_inc() a sibling LVCMDQ object and LVCMDQ destroyer
to refcount_dec(), so that iommufd core will help block a random destroy
call that breaks the rule.
This is a bit of compromise, because a driver might end up with abusing
the API that deadlocks the objects. So restrict the API to a dependency
between two driver-allocated objects of the same type, as iommufd would
unlikely build any core-level dependency in this case. And encourage to
use the macro version that currently supports the HW QUEUE objects only.
Link: https://patch.msgid.link/r/2735c32e759c82f2e6c87cb32134eaf09b7589b5.1752126748.git.nicolinc@nvidia.com
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Pranjal Shrivastava <praan@google.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Introduce a new IOMMUFD_CMD_HW_QUEUE_ALLOC ioctl for user space to allocate
a HW QUEUE object for a vIOMMU specific HW-accelerated queue, e.g.:
- NVIDIA's Virtual Command Queue
- AMD vIOMMU's Command Buffer, Event Log Buffers, and PPR Log Buffers
Since this is introduced with NVIDIA's VCMDQs that access the guest memory
in the physical address space, add an iommufd_hw_queue_alloc_phys() helper
that will create an access object to the queue memory in the IOAS, to avoid
the mappings of the guest memory from being unmapped, during the life cycle
of the HW queue object.
AMD's HW will need an hw_queue_init op that is mutually exclusive with the
hw_queue_init_phys op, and their case will bypass the access part, i.e. no
iommufd_hw_queue_alloc_phys() call.
Link: https://patch.msgid.link/r/dab4ace747deb46c1fe70a5c663307f46990ae56.1752126748.git.nicolinc@nvidia.com
Reviewed-by: Pranjal Shrivastava <praan@google.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
NVIDIA VCMDQ driver will have a driver-defined vDEVICE structure and do
some HW configurations with that.
To allow IOMMU drivers to define their own vDEVICE structures, move the
struct iommufd_vdevice to the public header and provide a pair of viommu
ops, similar to get_viommu_size and viommu_init.
Doing this, however, creates a new window between the vDEVICE allocation
and its driver-level initialization, during which an abort could happen
but it can't invoke a driver destroy function from the struct viommu_ops
since the driver structure isn't initialized yet. vIOMMU object doesn't
have this problem, since its destroy op is set via the viommu_ops by the
driver viommu_init function. Thus, vDEVICE should do something similar:
add a destroy function pointer inside the struct iommufd_vdevice instead
of the struct iommufd_viommu_ops.
Note that there is unlikely a use case for a type dependent vDEVICE, so
a static vdevice_size is probably enough for the near term instead of a
get_vdevice_size function op.
Link: https://patch.msgid.link/r/1e751c01da7863c669314d8e27fdb89eabcf5605.1752126748.git.nicolinc@nvidia.com
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Pranjal Shrivastava <praan@google.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The access object has been used externally by VFIO mdev devices, allowing
them to pin/unpin physical pages (via needs_pin_pages). Meanwhile, a racy
unmap can occur in this case, so these devices usually implement an unmap
handler, invoked by iommufd_access_notify_unmap().
The new HW queue object will need the same pin/unpin feature, although it
(unlike the mdev case) wants to reject any unmap attempt, during its life
cycle. Instead, it would not implement an unmap handler. Thus, bypass any
access->ops->unmap access call when the access is marked as internal.
Also, an area being pinned by an internal access should reject any unmap
request. This cannot be done inside iommufd_access_notify_unmap() as it's
a per-iopt action. Add a "num_locks" counter in the struct iopt_area, set
that in iopt_area_add_access() when the caller is an internal access.
Link: https://patch.msgid.link/r/6df9a43febf79c0379091ec59747276ce9d2493b.1752126748.git.nicolinc@nvidia.com
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Pranjal Shrivastava <praan@google.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Per the PCIe spec, behavior of the PASID capability is undefined if the
value of the PASID Enable bit changes while the Enable bit of the
function's ATS control register is Set. Unfortunately,
pdev_enable_caps() does exactly that by ordering enabling ATS for the
device before enabling PASID.
Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Cc: Vasant Hegde <vasant.hegde@amd.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Jerry Snitselaar <jsnitsel@redhat.com>
Fixes: eda8c2860ab679 ("iommu/amd: Enable device ATS/PASID/PRI capabilities independently")
Signed-off-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20250703155433.6221-1-eahariha@linux.microsoft.com
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
The new HW queue object, as an internal iommufd object, wants to reuse the
struct iommufd_access to pin some iova range in the iopt.
However, an access generally takes the refcount of an ictx. So, in such an
internal case, a deadlock could happen when the release of the ictx has to
wait for the release of the access first when releasing a hw_queue object,
which could wait for the release of the ictx that is refcounted:
ictx --releases--> hw_queue --releases--> access
^ |
|_________________releases________________v
To address this, add a set of lightweight internal APIs to unlink the ictx
and the access, i.e. no ictx refcounting by the access:
ictx --releases--> hw_queue --releases--> access
Then, there's no point in setting the access->ictx. So simply define !ictx
as an flag for an internal use and add an inline helper.
Link: https://patch.msgid.link/r/d8d84bf99cbebec56034b57b966a3d431385b90d.1752126748.git.nicolinc@nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Add a simple user_data for an input-to-output loopback test.
Link: https://patch.msgid.link/r/cae4632bb3d98a1efb3b77488fbf81814f2041c6.1752126748.git.nicolinc@nvidia.com
Reviewed-by: Pranjal Shrivastava <praan@google.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The new type of vIOMMU for tegra241-cmdqv driver needs a driver-specific
user data. So, add data_len/uptr to the iommu_viommu_alloc uAPI and pass
it in via the viommu_init iommu op.
Link: https://patch.msgid.link/r/2315b0e164b355746387e960745ac9154caec124.1752126748.git.nicolinc@nvidia.com
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Acked-by: Pranjal Shrivastava <praan@google.com>
Acked-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The new type of vIOMMU for tegra241-cmdqv allows user space VM to use one
of its virtual command queue HW resources exclusively. This requires user
space to mmap the corresponding MMIO page from kernel space for direct HW
control.
To forward the mmap info (offset and length), iommufd should add a driver
specific data structure to the IOMMUFD_CMD_VIOMMU_ALLOC ioctl, for driver
to output the info during the vIOMMU initialization back to user space.
Similar to the existing ioctls and their IOMMU handlers, add a user_data
to viommu_init op to bridge between iommufd and drivers.
Link: https://patch.msgid.link/r/90bd5637dab7f5507c7a64d2c4826e70431e45a4.1752126748.git.nicolinc@nvidia.com
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Pranjal Shrivastava <praan@google.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Replace u32 to make it clear. No functional changes.
Also simplify the kdoc since the type itself is clear enough.
Link: https://patch.msgid.link/r/651c50dee8ab900f691202ef0204cd5a43fdd6a2.1752126748.git.nicolinc@nvidia.com
Reviewed-by: Pranjal Shrivastava <praan@google.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The "id" is too general to get its meaning easily. Rename it explicitly to
"virt_id" and update the kdocs for readability. No functional changes.
Link: https://patch.msgid.link/r/1fac22d645e6ee555675726faf3798a68315b044.1752126748.git.nicolinc@nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Pranjal Shrivastava <praan@google.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
There are callers that read the unmapped bytes even when rc != 0. Thus, do
not forget to report it in the error path too.
Fixes: 8d40205f6093 ("iommufd: Add kAPI toward external drivers for kernel access")
Link: https://patch.msgid.link/r/e2b61303bbc008ba1a4e2d7c2a2894749b59fdac.1752126748.git.nicolinc@nvidia.com
Cc: stable@vger.kernel.org
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Fix the return values of these hypercall helpers so they return
a negated errno either directly or via hv_result_to_errno().
Update the callers to check for errno instead of using
hv_status_success(), and remove redundant error printing.
While at it, rearrange some variable declarations to adhere to style
guidelines i.e. "reverse fir tree order".
Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/1751582677-30930-5-git-send-email-nunodasneves@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <1751582677-30930-5-git-send-email-nunodasneves@linux.microsoft.com>
|
|
Commit <4f1492efb495> ("iommu/vt-d: Revert ATS timing change to fix boot
failure") placed the enabling of ATS in the probe_finalize callback. This
occurs after the default domain attachment, which is when the ATS cache
tag is assigned. Consequently, the device TLB cache tag is missed when the
domain is attached, leading to the device TLB not being invalidated in the
iommu_unmap paths.
Fix this by assigning the CACHE_TAG_DEVTLB cache tag when ATS is enabled.
Fixes: 4f1492efb495 ("iommu/vt-d: Revert ATS timing change to fix boot failure")
Cc: stable@vger.kernel.org
Suggested-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Tested-by: Shuicheng Lin <shuicheng.lin@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20250625050135.3129955-1-baolu.lu@linux.intel.com
Link: https://lore.kernel.org/r/20250628100351.3198955-2-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
Krzysztof points out that although the driver now supports COMPILE_TEST
for other architectures, it does not build cleanly with W=1 where the
stubbed-out ARM API can lead to an unused variable warning.
Since this is effectively the correct intent of the code in such cases,
mark it as __maybe_unused, tidying up some cruft in the process.
Reported-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Yong Wu <yong.wu@mediatek.com>
Link: https://lore.kernel.org/r/7c78149504900bc6c98a9c48f4418934b72d89ac.1751036478.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
Now that we have a concise helper to create an MSI parent domain,
switch the Intel IOMMU remapping over to that.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Nam Cao <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20241204124549.607054-10-maz@kernel.org
Link: https://lore.kernel.org/r/169c793c50be8493cfd9d11affb00e9ed6341c36.1750858125.git.namcao@linutronix.de
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
Now that we have a concise helper to create an MSI parent domain,
switch the AMD IOMMU remapping over to that.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Nam Cao <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20241204124549.607054-9-maz@kernel.org
Link: https://lore.kernel.org/r/92e5ae97a03e4ffc272349d0863cd2cc8f904c44.1750858125.git.namcao@linutronix.de
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
For supporting BBM Level 2 for userspace mappings, we want to ensure
that the smmu also supports its own version of BBM Level 2. Luckily, the
smmu spec (IHI 0070G 3.21.1.3) is stricter than the aarch64 spec (DDI
0487K.a D8.16.2), so already guarantees that no aborts are raised when
BBM level 2 is claimed.
Add the feature and testing for it under arm_smmu_sva_supported().
Signed-off-by: Mikołaj Lenczewski <miko.lenczewski@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Link: https://lore.kernel.org/r/20250625113435.26849-4-miko.lenczewski@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
No driver uses it now, remove the core code.
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/7-v2-68a2e1ba507c+1fb-iommu_rm_ops_pgsize_jgg@nvidia.com
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
This driver just uses a constant, put it in domain_alloc_paging and use
the domain's value instead of ops during finalise.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Acked-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/0-v1-662aad101e51+45-iommu_rm_ops_pgsize_msm_jgg@nvidia.com
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
Use syscon_regmap_lookup_by_phandle_args() which is a wrapper over
syscon_regmap_lookup_by_phandle() combined with getting the syscon
argument. Except simpler code this annotates within one line that given
phandle has arguments, so grepping for code would be easier.
There is also no real benefit in printing errors on missing syscon
argument, because this is done just too late: runtime check on
static/build-time data. Dtschema and Devicetree bindings offer the
static/build-time check for this already.
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250624-syscon-phandle-args-iommu-v3-2-1a36487d69b8@linaro.org
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
The syscon_regmap_lookup_by_phandle() will fail if property does not
exist, so doing of_property_read_bool() earlier is redundant. Drop that
check and move error message to syscon_regmap_lookup_by_phandle() error
case while converting it to dev_err_probe().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20250624-syscon-phandle-args-iommu-v3-1-1a36487d69b8@linaro.org
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
When two masters share an IOMMU, calling ops->of_xlate during
the second master's driver init may overwrite iommu->domain set
by the first. This causes the check if (iommu->domain == domain)
in rk_iommu_attach_device() to fail, resulting in the same
iommu->node being added twice to &rk_domain->iommus, which can
lead to an infinite loop in subsequent &rk_domain->iommus operations.
Cc: <stable@vger.kernel.org>
Fixes: 25c2325575cc ("iommu/rockchip: Add missing set_platform_dma_ops callback")
Signed-off-by: Simon Xue <xxm@rock-chips.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20250623020018.584802-1-xxm@rock-chips.com
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
When the first driver for Apple Silicon was upstreamed we accidentally
included `default ARCH_APPLE` in its Kconfig which then spread to almost
every subsequent driver. As soon as ARCH_APPLE is set to y this will
pull in many drivers as built-ins which is not what we want.
Thus, drop `default ARCH_APPLE` from Kconfig.
Signed-off-by: Sven Peter <sven@kernel.org>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Janne Grunau <j@jannau.net>
Link: https://lore.kernel.org/r/20250612-apple-kconfig-defconfig-v1-7-0e6f9cb512c1@kernel.org
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
This driver just uses a constant, put it in domain_alloc_paging
and use the domain's value instead of ops during init_domain.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/6-v2-68a2e1ba507c+1fb-iommu_rm_ops_pgsize_jgg@nvidia.com
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
This driver just uses a constant, put it in domain_alloc_paging
and use the domain's value instead of ops during finalise.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/5-v2-68a2e1ba507c+1fb-iommu_rm_ops_pgsize_jgg@nvidia.com
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
These drivers just have a constant value for their page size, move it
into their domain_alloc_paging function before setting up the geometry.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Niklas Schnelle <schnelle@linux.ibm.com> # for s390-iommu.c
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> # for exynos-iommu.c
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Acked-by: Chen-Yu Tsai <wens@csie.org> # sun50i-iommu.c
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/4-v2-68a2e1ba507c+1fb-iommu_rm_ops_pgsize_jgg@nvidia.com
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
These drivers all set the domain->pgsize_bitmap in their
domain_alloc_paging() functions, so the ops value is never used. Delete
it.
Reviewed-by: Sven Peter <sven@svenpeter.dev> # for Apple DART
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Tomasz Jeznach <tjeznach@rivosinc.com> # for RISC-V
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/3-v2-68a2e1ba507c+1fb-iommu_rm_ops_pgsize_jgg@nvidia.com
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
The driver never reads this value, arm_smmu_init_domain_context() always
sets domain.pgsize_bitmap to smmu->pgsize_bitmap, the per-instance value.
Remove the ops version entirely, the related dead code and make
arm_smmu_ops const.
Since this driver does not yet finalize the domain under
arm_smmu_domain_alloc_paging() add a page size initialization to alloc so
the page size is still setup prior to attach.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/2-v2-68a2e1ba507c+1fb-iommu_rm_ops_pgsize_jgg@nvidia.com
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
The driver never reads this value, arm_smmu_domain_finalise() always sets
domain.pgsize_bitmap to pgtbl_cfg, which comes from the per-smmu
calculated value.
Remove the ops version entirely, the related dead code and make
arm_smmu_ops const.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/1-v2-68a2e1ba507c+1fb-iommu_rm_ops_pgsize_jgg@nvidia.com
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
The EFR[HATS] bits indicate maximum host translation level supported by
IOMMU. Adding support to set the maximum host page table level as indicated
by EFR[HATS]. If the HATS=11b (reserved), the driver will attempt to use
guest page table for DMA API.
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Ankit Soni <Ankit.Soni@amd.com>
Link: https://lore.kernel.org/r/df0f8562c2a20895cc185c86f1a02c4d826fd597.1749016436.git.Ankit.Soni@amd.com
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
Current AMD IOMMU assumes Host Address Translation (HAT) is always
supported, and Linux kernel enables this capability by default. However,
in case of emulated and virtualized IOMMU, this might not be the case.
For example,current QEMU-emulated AMD vIOMMU does not support host
translation for VFIO pass-through device, but the interrupt remapping
support is required for x2APIC (i.e. kvm-msi-ext-dest-id is also not
supported by the guest OS). This would require the guest kernel to boot
with guest kernel option iommu=pt to by-pass the initialization of
host (v1) table.
The AMD I/O Virtualization Technology (IOMMU) Specification Rev 3.10 [1]
introduces a new flag 'HATDis' in the IVHD 11h IOMMU attributes to indicate
that HAT is not supported on a particular IOMMU instance.
Therefore, modifies the AMD IOMMU driver to detect the new HATDis
attributes, and disable host translation and switch to use guest
translation if it is available. Otherwise, the driver will disable DMA
translation.
[1] https://www.amd.com/content/dam/amd/en/documents/processor-tech-docs/specifications/48882_IOMMU.pdf
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Ankit Soni <Ankit.Soni@amd.com>
Link: https://lore.kernel.org/r/8109b208f87b80e400c2abd24a2e44fcbc0763a5.1749016436.git.Ankit.Soni@amd.com
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
Add plumbing to the AMD IOMMU driver to allow KVM to control whether or
not an IRTE is configured to generate GA log interrupts. KVM only needs a
notification if the target vCPU is blocking, so the vCPU can be awakened.
If a vCPU is preempted or exits to userspace, KVM clears is_run, but will
set the vCPU back to running when userspace does KVM_RUN and/or the vCPU
task is scheduled back in, i.e. KVM doesn't need a notification.
Unconditionally pass "true" in all KVM paths to isolate the IOMMU changes
from the KVM changes insofar as possible.
Opportunistically swap the ordering of parameters for amd_iommu_update_ga()
so that the match amd_iommu_activate_guest_mode().
Note, as of this writing, the AMD IOMMU manual doesn't list GALogIntr as
a non-cached field, but per AMD hardware architects, it's not cached and
can be safely updated without an invalidation.
Link: https://lore.kernel.org/all/b29b8c22-2fd4-4b5e-b755-9198874157c7@amd.com
Cc: Vasant Hegde <vasant.hegde@amd.com>
Cc: Joao Martins <joao.m.martins@oracle.com>
Link: https://lore.kernel.org/r/20250611224604.313496-62-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
WARN if KVM attempts to update IRTE entries when virtual APIC isn't fully
supported, as KVM should guard all such calls on IRQ posting being enabled.
Link: https://lore.kernel.org/r/20250611224604.313496-58-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
inhibited
If an IRQ can be posted to a vCPU, but AVIC is currently inhibited on the
vCPU, go through the dance of "affining" the IRTE to the vCPU, but leave
the actual IRTE in remapped mode. KVM already handles the case where AVIC
is inhibited => uninhibited with posted IRQs (see avic_set_pi_irte_mode()),
but doesn't handle the scenario where a postable IRQ comes along while AVIC
is inhibited.
Link: https://lore.kernel.org/r/20250611224604.313496-45-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
