summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/mediatek/mt76/mt7615/init.c
AgeCommit message (Collapse)Author
2020-07-21mt76: mt7615: implement testmode supportFelix Fietkau
Supports sending a configurable number of packets with a specific rate and configurable tx power levels / antenna settings, as well as displaying rx statistics. Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-28mt76: mt7615: switch to per-vif power_save supportLorenzo Bianconi
switch to per-vif ps support since mt7615 offload firmware can handle it properly. This patch allows enabling/disabling power-save support on p2p interface Tested-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-28mt76: mt7615: fix NULL pointer deref in mt7615_register_ext_phyLorenzo Bianconi
Fix following NULL pointer dereference in mt7615_register_ext_phy routine [ 27.648860] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000060 [ 27.657697] Mem abort info: [ 27.660495] ESR = 0x96000046 [ 27.663549] EC = 0x25: DABT (current EL), IL = 32 bits [ 27.668857] SET = 0, FnV = 0 [ 27.671910] EA = 0, S1PTW = 0 [ 27.675040] Data abort info: [ 27.677918] ISV = 0, ISS = 0x00000046 [ 27.681751] CM = 0, WnR = 1 [ 27.684717] user pgtable: 4k pages, 39-bit VAs, pgdp=000000007d8cc000 [ 27.691156] [0000000000000060] pgd=000000007d281003, pud=000000007d281003, pmd=0000000000000000 [ 27.699857] Internal error: Oops: 96000046 [#1] SMP [ 27.774939] CPU: 1 PID: 701 Comm: ash Not tainted 5.4.41 #0 [ 27.780500] Hardware name: Bananapi BPI-R64 (DT) [ 27.785108] pstate: 60000005 (nZCv daif -PAN -UAO) [ 27.789897] pc : mt7615_register_ext_phy+0x60/0x2c8 [mt7615_common] [ 27.796156] lr : mt7615_init_debugfs+0x99c/0x18e0 [mt7615_common] [ 27.802237] sp : ffffffc0115dbcb0 [ 27.805541] x29: ffffffc0115dbcb0 x28: ffffff803e309600 [ 27.810843] x27: 0000000000000000 x26: 0000000000000000 [ 27.816144] x25: ffffff803d936928 x24: ffffff803d936950 [ 27.821447] x23: 0000000000000000 x22: 0000000fffffffe0 [ 27.826749] x21: 0000000000000002 x20: ffffff8001e82620 [ 27.832050] x19: 0000000000000000 x18: 0000000000000000 [ 27.837352] x17: 0000000000000000 x16: 0000000000000000 [ 27.842653] x15: 0000000000000000 x14: 0000000000000000 [ 27.847955] x13: 0000000000000000 x12: 0000000000000000 [ 27.853256] x11: 0000000000000000 x10: 0000000000000040 [ 27.858558] x9 : ffffffc0112b3eb0 x8 : ffffffc0112b3ea8 [ 27.863859] x7 : ffffff803e400048 x6 : 0000000000000000 [ 27.869161] x5 : ffffff803e400000 x4 : 0000000000000000 [ 27.874462] x3 : 0000000000000001 x2 : 0000000000007615 [ 27.879764] x1 : 0000000000000068 x0 : ffffffc0088ccc58 [ 27.885066] Call trace: [ 27.887505] mt7615_register_ext_phy+0x60/0x2c8 [mt7615_common] [ 27.893416] mt7615_init_debugfs+0x99c/0x18e0 [mt7615_common] [ 27.899156] simple_attr_write+0xf0/0x178 [ 27.903158] debugfs_attr_write+0x4c/0x70 [ 27.907159] full_proxy_write+0x60/0x90 [ 27.910987] __vfs_write+0x18/0x40 [ 27.914379] vfs_write+0xb0/0x1b8 [ 27.917685] ksys_write+0x4c/0xc8 [ 27.920989] __arm64_sys_write+0x18/0x20 Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-28mt76: mt7615: introduce remain_on_channel supportLorenzo Bianconi
Introduce remain_on_channel support to mt7615 driver if the device is running offload firmware Co-developed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-14mt76: mt7615: fix typo defining ps workLorenzo Bianconi
Fix typo defining ps_work in mt7615_register_ext_phy(). This is not a real issue since 802.11 power save is not yet support by the external phy Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-13mt76: enable p2p supportLorenzo Bianconi
Introduce p2p-go/p2p-client suppor to mt76 driver Co-developed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-12mt76: set runtime stream caps by mt76_phyRyder Lee
This patch can support concurrent dual-band operation. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-12mt76: mt7663: add support to sched scan with randomise addrSean Wang
Add support to sched scan with randomise addr Co-developed-by: Wan-Feng Jiang <Wan-Feng.Jiang@mediatek.com> Signed-off-by: Wan-Feng Jiang <Wan-Feng.Jiang@mediatek.com> Co-developed-by: Soul Huang <Soul.Huang@mediatek.com> Signed-off-by: Soul Huang <Soul.Huang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-12mt76: mt7615: fix delta tx power for mt7663Lorenzo Bianconi
Fix mt7663 eeprom definitions for delta tx power parsing Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-12mt76: mt7663: fix target power parsingLorenzo Bianconi
Fix target parsing from eeprom/efuse partition for 7663 chipsets Fixes: f40ac0f3d3c0 ("mt76: mt7615: introduce mt7663e support") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-12mt76: mt7615: check return value of mt7615_eeprom_get_power_indexLorenzo Bianconi
mt7615_eeprom_get_power_index can return negative error value. Check mt7615_eeprom_get_power_index return value before using it Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-12mt76: mt7615: add gtk rekey offload supportLorenzo Bianconi
Add KCK and KEK offload support to mt7615 driver in order to support GTK rekeying during PM suspend Co-developed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Co-developed-by: Wan-Feng Jiang <Wan-Feng.Jiang@mediatek.com> Signed-off-by: Wan-Feng Jiang <Wan-Feng.Jiang@mediatek.com> Co-developed-by: Soul Huang <Soul.Huang@mediatek.com> Signed-off-by: Soul Huang <Soul.Huang@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-12mt76: mt7615: introduce mt7615_check_offload_capability routineLorenzo Bianconi
Introduce mt7615_check_offload_capability routine to set hw/wiphy offload capabilities according to the running firmware Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-12mt76: mt7615: fix getting maximum tx power from eepromFelix Fietkau
On top of the EEPROM target power, each rate can also has a power offset. On many devices, this power offset is used to boost the tx power of lower rates. Take this into account when parsing rate power. The assumption here is, that the first rate (OFDM 6M or CCK 1M) has the highest tx power Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-12mt76: enable TDLS supportLorenzo Bianconi
Enable mac80211 TDLS support by default. Disable TDLS hw filtering for mt7615 devices Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-12mt76: mt7663: introduce 802.11 PS support in sta modeLorenzo Bianconi
Enable 802.11 power-save support available in mt7663 firmware Co-developed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-12mt76: mt7615: move core shared code in mt7615-common moduleLorenzo Bianconi
Create mt7615-common module in order to collect shared code between usb and mmio code. Move the following source files in mt7615-common module: - main.c - init.c - mcu.c - mac.c - debugfs.c - eeprom.c - trace.c Create the following source files for mmio only source code and move them in mt7615e module: - pci_init.c - dma.c - pci_mac.c Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-12mt76: mt7615: fix possible deadlock in mt7615_stopLorenzo Bianconi
make mac_work per phy instead of per device and fix a possible deadlock in mt7615_stop since mt7615_mac_work runs holding mt76 mutex Fixes: fdd2e570764c2 ("mt76: mt7615: add dual-phy support for mac80211 ops") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-12mt76: mt7615: rework IRQ handling to prepare for MSI supportFelix Fietkau
With MSI interrupts, IRQs must not be enabled from within the IRQ handler, because that can lead to lost events. Defer IRQ processing to a tasklet, which is also responsible for enabling IRQs (to avoid race conditions against the handler) Co-developed-by: Soul Huang <Soul.Huang@mediatek.com> Acked-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Soul Huang <soul.huang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-12mt76: mt7615: set hw scan limits only for firmware with offload supportFelix Fietkau
They do not apply to software scan Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-12mt76: mt7615: disable hw/sched scan ops for non-offload firmwareFelix Fietkau
Avoid having to attempt hw scan and fall back to software for every scan on devices/firmware without hw scan support Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-12mt76: mt7663: fix aggr range entry in debugfsLorenzo Bianconi
Fix register definitions for aggr range counter registers for mt7663 chipset Fixes: f40ac0f3d3c0 ("mt76: mt7615: introduce mt7663e support") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-12mt76: mt7615: add address parameter to mt7615_eeprom_initLorenzo Bianconi
Introduce address parameter to mt7615_eeprom_init routine in order to be reused adding usb support to mt7615 driver Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-12mt76: mt7615: remove unnecessary register operationsSean Wang
Remove mt76_wr(dev, MT_CSR(0x010), 0x8208) that would cause MT_PCIE_IRQ_ENABLE to be disabled; MT_PCIE_IRQ_ENABLE should always keep on enabled when the driver is running. 0x44064 is a not existing address Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-12mt76: mt7615: introduce scheduled scan supportLorenzo Bianconi
Introduce scheduled scan support for mt7663e devices Co-developed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-12mt76: mt7615: introduce hw scan supportLorenzo Bianconi
Introduce hw scan support to mt7663e driver Co-developed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-12mt76: mt7663: keep Rx filters as the defaultSean Wang
Keep Rx filters default value if the firmware supports offload and low power features. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-12mt76: mt7615: make scs configurable per phyLorenzo Bianconi
Make scs configurable per phy since most of the chipsets do not support dbdc Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-03-17mt76: mt7615: introduce mt7663e supportLorenzo Bianconi
Introduce support for mt7663e 802.11ac 2x2:2 chipset to mt7615 driver. Co-developed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Co-developed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-03-17mt76: mt7615: introduce mt7615_init_mac_chain routineLorenzo Bianconi
Introduce mt7615_init_mac_chain routine to configure per band mac register since new devices (e.g. mt7663e) do not support dbdc Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-03-17mt76: mt7615: introduce mt7615_init_device routineLorenzo Bianconi
Add mt7615_init_device routine in order to be reused adding support for mt7663 in mt7615 driver Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-03-17mt76: mt7615: fix antenna mask initialization in DBDC modeFelix Fietkau
Update wiphy available antenna mask, and fix chainmask setting on 3x3 hardware Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-02-14mt76: fix rounding issues on converting per-chain and combined txpowerFelix Fietkau
Unify code converting between the different txpower values. Always add/remove the combined txpower delta before dividing half-dB values. Also fix the combined txpower delta values. The correct half-dB delta for 3 chains is 9, not 8. Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-02-14mt76: mt7615: fix monitor mode on second PHYFelix Fietkau
The second PHY receives no packets unless there is an active vif present. Set the WANT_MONITOR_VIF flag to deal with that Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-02-14mt76: mt7615: implement hardware reset supportFelix Fietkau
When the firmware detects a problem, it needs the host to stop/reset DMA and resume it again when the hardware state has been reset. Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-02-14mt76: mt7615: disable DBDC on MT7622Felix Fietkau
It is only supported on MT7615 Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-02-14mt76: mt7615: implement DMA support for MT7622Felix Fietkau
MT7622 does not have the CR4 microcontroller sitting in the data path. Because of that, it uses the chip's native tx descriptor format instead of something parsed and converted by the firmware. Co-developed-by: Shayne Chen <shayne.chen@mediatek.com> Co-developed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
2020-02-14mt76: mt7615: implement probing and firmware loading on MT7622Felix Fietkau
MT7622 does not have a CR4 microcontroller, so it only uses its own N9 firmware. Co-developed-by: Shayne Chen <shayne.chen@mediatek.com> Co-developed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-02-14mt76: move WIPHY_FLAG_HAS_CHANNEL_SWITCH in mt76_phy_initLorenzo Bianconi
Move WIPHY_FLAG_HAS_CHANNEL_SWITCH in mt76-core module since now all drivers support Channel Switch Announcement Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-02-14mt76: mt7615: add missing settings for simultaneous dual-band supportRyder Lee
MT7615 supports dual-wiphy which means that it can run on 2.4G and 5GHz channels simultaneously, and driver should configure each band. Add missing register settings, and refine band related definitions to avoid duplicate codes. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-02-14mt76: mt7615: introduce LED supportLorenzo Bianconi
Initialize brightness_set and blink_set callbacks to mt7615_led_set_brightness and mt7615_led_set_blink in order to enable LED support in mt7615 driver Tested-by: Deng Qingfang <dengqf6@mail2.sysu.edu.cn> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-02-14mt76: mt7615: fix MT7615_CFEND_RATE_DEFAULT valueRyder Lee
Fix default CFEND_RATE and replace hardcode values. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-02-14mt76: mt7615: add set_coverage class supportLorenzo Bianconi
Add the capability to configure acktimeout for mt7615 driver. Moreover configure slottime according to the value provided by mac80211 Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-02-14mt76: mt7615: defer mcu initialization via workqueueFelix Fietkau
Loading the mcu firmware and waiting for it to boot takes a long time, which adds a significant amount to the system boot time. Fix this by running the mcu init from a workqueue and waiting for it to complete before starting the phy or issuing mcu commands via debugfs Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-02-14mt76: mt7615: add support for registering a second wiphy via debugfsFelix Fietkau
This is only used for testing for now. In the future it will be possible to enable the second PHY through an proper API via device tree Running: echo 1 > /sys/kernel/debug/ieee80211/phyX/mt76/dbdc will register a second wiphy (and limit the primary one to 2 spatial streams). The second wiphy will only be able to run on 5 GHz, while the primary one can operate in both bands (if supported by the device). Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-02-14mt76: mt7615: move radio/mac initialization to .start/stop callbacksFelix Fietkau
Run initialization per phy Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-02-14mt76: mt7615: add multiple wiphy support to the dfs support codeFelix Fietkau
There are two DFS detectors on the chip. When using 160 MHz channel bandwidth (not supported in dual-wiphy mode), both are used. Otherwise, one detector is used per wiphy. Rework the code to start/stop them separately per phy and to indicate the radar event on the right phy based on the detector index Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-02-14mt76: mt7615: remove useless MT_HW_RDD0/1 enumFelix Fietkau
Writing 0/1 is shorter and just as clear Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-02-14mt76: mt7615: add missing register init for dual-wiphy supportFelix Fietkau
Initialize low-power beacon mode setting Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-02-14mt76: mt7615: add dual-phy support for mac80211 opsFelix Fietkau
Allows them to be used by a separately registered wiphy later Signed-off-by: Felix Fietkau <nbd@nbd.name>
generated by cgit (git 2.34.1) at 2025-08-02 01:44:57 +0000