| Age | Commit message (Collapse) | Author |
|---|
|
Prefer {} to {0} in initializers since {} works even when the first
member is not a scalar.
Generated using:
sed -i 's/{[[:space:]]*0[[:space:]]*}/{}/g' drivers/net/wireless/ath/ath11k/*
Compile tested only.
Link: https://patch.msgid.link/20250720-ath11k-zero-brace-v1-1-6132e2ef1748@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Prefer {} to {0} in initializers since {} works even when the first
member is not a scalar.
Generated using:
sed -i 's/{[[:space:]]*0[[:space:]]*}/{}/g' drivers/net/wireless/ath/ath10k/*
Compile tested only.
Link: https://patch.msgid.link/20250720-ath10k-zero-brace-v1-1-c1ee818d6238@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
CYW54591 is a variant of BCM4355 silicon with the same chipid. In the
chipid-fwname mapping table, apply chiprev 13 to identify CYW54591.
Skip reading OTP process for CYW chip since it contains vendor specific
information which is not common for cypress.
Signed-off-by: Double Lo <double.lo@cypress.com>
Signed-off-by: Chi-hsien Lin <chi-hsien.lin@cypress.com>
Signed-off-by: Ian Lin <ian.lin@infineon.com>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20250624093453.7264-1-ian.lin@infineon.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
After commit bd99a3013bdc ("brcmfmac: move configuration of probe request
IEs"), the probe request MGMT IE addition operation brcmf_vif_set_mgmt_ie()
got moved from the brcmf_p2p_scan_prep() to the brcmf_cfg80211_scan().
Because of this, as part of the scan request handler for the P2P Discovery,
vif struct used for adding the Probe Request P2P IE in firmware got changed
from the P2PAPI_BSSCFG_DEVICE vif to P2PAPI_BSSCFG_PRIMARY vif incorrectly.
So the firmware stopped adding P2P IE to the outgoing P2P Discovery probe
requests frames and the other P2P peers were unable to discover this device
causing a regression on the P2P feature.
To fix this, while setting the P2P IE in firmware, properly use the vif of
the P2P discovery wdev on which the driver received the P2P scan request.
This is done by not changing the vif pointer, until brcmf_vif_set_mgmt_ie()
is completed.
Fixes: bd99a3013bdc ("brcmfmac: move configuration of probe request IEs")
Signed-off-by: Gokul Sivakumar <gokulkumar.sivakumar@infineon.com>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20250626050706.7271-1-gokulkumar.sivakumar@infineon.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
As described by Vitaly Lifshits:
> Starting from Tiger Lake, LAN NVM is locked for writes by SW, so the
> driver cannot perform checksum validation and correction. This means
> that all NVM images must leave the factory with correct checksum and
> checksum valid bit set.
Unfortunately some systems have left the factory with an uninitialized
value of 0xFFFF at register address 0x3F (checksum word location).
So on Tiger Lake platform we ignore the computed checksum when such
condition is encountered.
Signed-off-by: Jacek Kowalski <jacek@jacekk.info>
Tested-by: Vlad URSU <vlad@ursu.me>
Fixes: 4051f68318ca9 ("e1000e: Do not take care about recovery NVM checksum")
Cc: stable@vger.kernel.org
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
As described by Vitaly Lifshits:
> Starting from Tiger Lake, LAN NVM is locked for writes by SW, so the
> driver cannot perform checksum validation and correction. This means
> that all NVM images must leave the factory with correct checksum and
> checksum valid bit set. Since Tiger Lake devices were the first to have
> this lock, some systems in the field did not meet this requirement.
> Therefore, for these transitional devices we skip checksum update and
> verification, if the valid bit is not set.
Signed-off-by: Jacek Kowalski <jacek@jacekk.info>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Fixes: 4051f68318ca9 ("e1000e: Do not take care about recovery NVM checksum")
Cc: stable@vger.kernel.org
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Add check for the return value of devm_kmemdup()
to prevent potential null pointer dereference.
Fixes: c76488109616 ("ice: Implement Dynamic Device Personalization (DDP) download")
Cc: stable@vger.kernel.org
Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
When the PF is processing an Admin Queue message to delete a VF's MACs
from the MAC filter, we currently check if the PF set the MAC and if
the VF is trusted.
This results in undesirable behaviour, where if a trusted VF with a
PF-set MAC sets itself down (which sends an AQ message to delete the
VF's MAC filters) then the VF MAC is erased from the interface.
This results in the VF losing its PF-set MAC which should not happen.
There is no need to check for trust at all, because an untrusted VF
cannot change its own MAC. The only check needed is whether the PF set
the MAC. If the PF set the MAC, then don't erase the MAC on link-down.
Resolve this by changing the deletion check only for PF-set MAC.
(the out-of-tree driver has also intentionally removed the check for VF
trust here with OOT driver version 2.26.8, this changes the Linux kernel
driver behaviour and comment to match the OOT driver behaviour)
Fixes: ea2a1cfc3b201 ("i40e: Fix VF MAC filter removal")
Signed-off-by: Jamie Bainbridge <jamie.bainbridge@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Currently the tx_dropped field in VF stats is not updated correctly
when reading stats from the PF. This is because it reads from
i40e_eth_stats.tx_discards which seems to be unused for per VSI stats,
as it is not updated by i40e_update_eth_stats() and the corresponding
register, GLV_TDPC, is not implemented[1].
Use i40e_eth_stats.tx_errors instead, which is actually updated by
i40e_update_eth_stats() by reading from GLV_TEPC.
To test, create a VF and try to send bad packets through it:
$ echo 1 > /sys/class/net/enp2s0f0/device/sriov_numvfs
$ cat test.py
from scapy.all import *
vlan_pkt = Ether(dst="ff:ff:ff:ff:ff:ff") / Dot1Q(vlan=999) / IP(dst="192.168.0.1") / ICMP()
ttl_pkt = IP(dst="8.8.8.8", ttl=0) / ICMP()
print("Send packet with bad VLAN tag")
sendp(vlan_pkt, iface="enp2s0f0v0")
print("Send packet with TTL=0")
sendp(ttl_pkt, iface="enp2s0f0v0")
$ ip -s link show dev enp2s0f0
16: enp2s0f0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT group default qlen 1000
link/ether 3c:ec:ef:b7:e0:ac brd ff:ff:ff:ff:ff:ff
RX: bytes packets errors dropped missed mcast
0 0 0 0 0 0
TX: bytes packets errors dropped carrier collsns
0 0 0 0 0 0
vf 0 link/ether e2:c6:fd:c1:1e:92 brd ff:ff:ff:ff:ff:ff, spoof checking on, link-state auto, trust off
RX: bytes packets mcast bcast dropped
0 0 0 0 0
TX: bytes packets dropped
0 0 0
$ python test.py
Send packet with bad VLAN tag
.
Sent 1 packets.
Send packet with TTL=0
.
Sent 1 packets.
$ ip -s link show dev enp2s0f0
16: enp2s0f0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT group default qlen 1000
link/ether 3c:ec:ef:b7:e0:ac brd ff:ff:ff:ff:ff:ff
RX: bytes packets errors dropped missed mcast
0 0 0 0 0 0
TX: bytes packets errors dropped carrier collsns
0 0 0 0 0 0
vf 0 link/ether e2:c6:fd:c1:1e:92 brd ff:ff:ff:ff:ff:ff, spoof checking on, link-state auto, trust off
RX: bytes packets mcast bcast dropped
0 0 0 0 0
TX: bytes packets dropped
0 0 0
A packet with non-existent VLAN tag and a packet with TTL = 0 are sent,
but tx_dropped is not incremented.
After patch:
$ ip -s link show dev enp2s0f0
19: enp2s0f0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT group default qlen 1000
link/ether 3c:ec:ef:b7:e0:ac brd ff:ff:ff:ff:ff:ff
RX: bytes packets errors dropped missed mcast
0 0 0 0 0 0
TX: bytes packets errors dropped carrier collsns
0 0 0 0 0 0
vf 0 link/ether 4a:b7:3d:37:f7:56 brd ff:ff:ff:ff:ff:ff, spoof checking on, link-state auto, trust off
RX: bytes packets mcast bcast dropped
0 0 0 0 0
TX: bytes packets dropped
0 0 2
Fixes: dc645daef9af5bcbd9c ("i40e: implement VF stats NDO")
Signed-off-by: Dennis Chen <dechen@redhat.com>
Link: https://www.intel.com/content/www/us/en/content-details/596333/intel-ethernet-controller-x710-tm4-at2-carlsville-datasheet.html
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
This commit remove duplicate assignments for net->pcpu_stat_type
in usbnet_probe().
Signed-off-by: Zqiang <qiang.zhang@linux.dev>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv fixes from Wei Liu:
- Select use CONFIG_SYSFB only if EFI is enabled (Michael Kelley)
- An assorted set of fixes to remove warnings for missing export.h
header inclusion (Naman Jain)
- An assorted set of fixes for when Linux run as the root partition
for Microsoft Hypervisor (Mukesh Rathor, Nuno Das Neves, Stanislav
Kinsburskii)
- Fix the check for HYPERVISOR_CALLBACK_VECTOR (Naman Jain)
- Fix fcopy tool to handle irregularities with size of ring buffer
(Naman Jain)
- Fix incorrect file path conversion in fcopy tool (Yasumasa Suenaga)
* tag 'hyperv-fixes-signed-20250718' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
tools/hv: fcopy: Fix irregularities with size of ring buffer
PCI: hv: Use the correct hypercall for unmasking interrupts on nested
x86/hyperv: Expose hv_map_msi_interrupt()
Drivers: hv: Use nested hypercall for post message and signal event
x86/hyperv: Clean up hv_map/unmap_interrupt() return values
x86/hyperv: Fix usage of cpu_online_mask to get valid cpu
PCI: hv: Don't load the driver for baremetal root partition
net: mana: Fix warnings for missing export.h header inclusion
PCI: hv: Fix warnings for missing export.h header inclusion
clocksource: hyper-v: Fix warnings for missing export.h header inclusion
x86/hyperv: Fix warnings for missing export.h header inclusion
Drivers: hv: Fix warnings for missing export.h header inclusion
Drivers: hv: Fix the check for HYPERVISOR_CALLBACK_VECTOR
tools/hv: fcopy: Fix incorrect file path conversion
Drivers: hv: Select CONFIG_SYSFB only if EFI is enabled
|
|
This adds the capabilities, ipsec_next_header and inner/outer
l4_type_ext fields to support RSS for the decrypted packets.
These fields are specifically for firmware steering. HWS validation
logic is updated to correctly handle the changes, ensuring the
unsupported fields are not set.
Besides, reserved_at_c4 is fixed to reserved_at_d4 to reflect the
accurate offset within the structure.
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1752734895-257735-2-git-send-email-tariqt@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Currently, the mac80211 layer handles construction and parsing
of 802.11 headers during packet transmission and reception.
Offloading encapsulation and decapsulation to hardware can
significantly enhance performance. Check the service bit to determine
if the firmware supports Ethernet offload. If supported, advertise the
capability to mac80211 to bypass software-based 802.11 header
processing.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00217-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Nithyanantham Paramasivam <nithyanantham.paramasivam@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250718025513.32982-4-nithyanantham.paramasivam@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Currently, the ath12k driver supports only the native Wi-Fi
frame format. In this mode, the ieee80211_tx_status() function
works correctly to report transmission status to mac80211, as
it retrieves station information using sta_info_get_by_addrs().
However, this method is not applicable for Ethernet-converted
packets, since sta_info_get_by_addrs() cannot extract station
information from such formats.
Retrieve station information using ath12k_peer_find_by_id() to
support all frame formats, including native Wi-Fi, raw, and Ethernet.
Report transmission status using ieee80211_tx_status_ext(), and
include rate information as part of the datapath TX status report.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00217-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Nithyanantham Paramasivam <nithyanantham.paramasivam@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250718025513.32982-3-nithyanantham.paramasivam@oss.qualcomm.com
[changed instances of { 0 } to {}]
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Currently, in the transmit (TX) direction, EAPOL, QoS NULL,
and multicast frames are sent in native Wi-Fi (802.11) format.
However, when the virtual interface is configured in Ethernet
mode, transmission fails for packets enqueued in native Wi-fi format.
To address this issue, the firmware should be instructed to
treat these packets as RAW type packets, ensuring proper
handling even when the interface operates in Ethernet mode.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00217-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Nithyanantham Paramasivam <nithyanantham.paramasivam@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250718025513.32982-2-nithyanantham.paramasivam@oss.qualcomm.com
[fix indentation]
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
In the original design, it is assumed local and peer eswitches have the
same number of vfs. However, in new firmware, local and peer eswitches
can have different number of vfs configured by mlxconfig. In such
configuration, it is incorrect to derive the number of vfs from the
local device's eswitch.
Fix this by updating the peer miss rules add and delete functions to use
the peer device's eswitch and vf count instead of the local device's
information, ensuring correct behavior regardless of vf configuration
differences.
Fixes: ac004b832128 ("net/mlx5e: E-Switch, Add peer miss rules")
Signed-off-by: Shahar Shitrit <shshitrit@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/1752753970-261832-3-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If cmd_exec() is called with callback and mlx5_cmd_invoke() returns an
error, resources allocated in cmd_exec() will not be freed.
Fix the code to release the resources if mlx5_cmd_invoke() returns an
error.
Fixes: f086470122d5 ("net/mlx5: cmdif, Return value improvements")
Reported-by: Alex Tereshkin <atereshkin@nvidia.com>
Signed-off-by: Chiara Meiohas <cmeiohas@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Vlad Dumitrescu <vdumitrescu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/1752753970-261832-2-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The TCP header fields seq and ack_seq are 32-bit values in network
byte order as (__be32). these fields were earlier printed using
ntohs(), which converts only 16-bit values and produces incorrect
results for 32-bit fields. This patch is changeing the conversion
to ntohl(), ensuring correct interpretation of these sequence numbers.
Notably, the format specifier is updated from %d to %u to reflect the
unsigned nature of these fields.
improves the accuracy of debug log messages for TCP sequence and
acknowledgment numbers during TX timeouts.
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250717193552.3648791-1-alok.a.tiwari@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Wire-up ethtool_ops::nway_reset to phy_ethtool_nway_reset in order to
support re-starting auto-negotiation.
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250717180915.2611890-1-florian.fainelli@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit cc34acd577f1 ("docs: net: document new locking reality")
introduced netif_ vs dev_ function semantics: the former expects locked
netdev, the latter takes care of the locking. We don't strictly
follow this semantics on either side, but there are more dev_xxx handlers
now that don't fit. Rename them to netif_xxx where appropriate.
netif_close_many is used only by vlan/dsa and one mtk driver, so move it into
NETDEV_INTERNAL namespace.
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250717172333.1288349-8-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit cc34acd577f1 ("docs: net: document new locking reality")
introduced netif_ vs dev_ function semantics: the former expects locked
netdev, the latter takes care of the locking. We don't strictly
follow this semantics on either side, but there are more dev_xxx handlers
now that don't fit. Rename them to netif_xxx where appropriate.
Note that one dev_set_threaded call still remains in mt76 for debugfs file.
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250717172333.1288349-7-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit cc34acd577f1 ("docs: net: document new locking reality")
introduced netif_ vs dev_ function semantics: the former expects locked
netdev, the latter takes care of the locking. We don't strictly
follow this semantics on either side, but there are more dev_xxx handlers
now that don't fit. Rename them to netif_xxx where appropriate.
__netif_set_mtu is used only by bond, so move it into
NETDEV_INTERNAL namespace.
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250717172333.1288349-5-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit cc34acd577f1 ("docs: net: document new locking reality")
introduced netif_ vs dev_ function semantics: the former expects locked
netdev, the latter takes care of the locking. We don't strictly
follow this semantics on either side, but there are more dev_xxx handlers
now that don't fit. Rename them to netif_xxx where appropriate.
netif_pre_changeaddr_notify is used only by ipvlan/bond, so move it into
NETDEV_INTERNAL namespace.
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250717172333.1288349-4-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit cc34acd577f1 ("docs: net: document new locking reality")
introduced netif_ vs dev_ function semantics: the former expects locked
netdev, the latter takes care of the locking. We don't strictly
follow this semantics on either side, but there are more dev_xxx handlers
now that don't fit. Rename them to netif_xxx where appropriate.
netif_get_mac_address is used only by tun/tap, so move it into
NETDEV_INTERNAL namespace.
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250717172333.1288349-3-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit cc34acd577f1 ("docs: net: document new locking reality")
introduced netif_ vs dev_ function semantics: the former expects locked
netdev, the latter takes care of the locking. We don't strictly
follow this semantics on either side, but there are more dev_xxx handlers
now that don't fit. Rename them to netif_xxx where appropriate.
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250717172333.1288349-2-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fixes overlapping buffer allocation for ICSSG peripheral
used for storing packets to be received/transmitted.
There are 3 buffers:
1. Buffer for Locally Injected Packets
2. Buffer for Forwarding Packets
3. Buffer for Host Egress Packets
In existing allocation buffers for 2. and 3. are overlapping causing
packet corruption.
Packet corruption observations:
During tcp iperf testing, due to overlapping buffers the received ack
packet overwrites the packet to be transmitted. So, we see packets on
wire with the ack packet content inside the content of next TCP packet
from sender device.
Details for AM64x switch mode:
-> Allocation by existing driver:
+---------+-------------------------------------------------------------+
| | SLICE 0 | SLICE 1 |
| +------+--------------+--------+------+--------------+--------+
| | Slot | Base Address | Size | Slot | Base Address | Size |
|---------+------+--------------+--------+------+--------------+--------+
| | 0 | 70000000 | 0x2000 | 0 | 70010000 | 0x2000 |
| | 1 | 70002000 | 0x2000 | 1 | 70012000 | 0x2000 |
| | 2 | 70004000 | 0x2000 | 2 | 70014000 | 0x2000 |
| FWD | 3 | 70006000 | 0x2000 | 3 | 70016000 | 0x2000 |
| Buffers | 4 | 70008000 | 0x2000 | 4 | 70018000 | 0x2000 |
| | 5 | 7000A000 | 0x2000 | 5 | 7001A000 | 0x2000 |
| | 6 | 7000C000 | 0x2000 | 6 | 7001C000 | 0x2000 |
| | 7 | 7000E000 | 0x2000 | 7 | 7001E000 | 0x2000 |
+---------+------+--------------+--------+------+--------------+--------+
| | 8 | 70020000 | 0x1000 | 8 | 70028000 | 0x1000 |
| | 9 | 70021000 | 0x1000 | 9 | 70029000 | 0x1000 |
| | 10 | 70022000 | 0x1000 | 10 | 7002A000 | 0x1000 |
| Our | 11 | 70023000 | 0x1000 | 11 | 7002B000 | 0x1000 |
| LI | 12 | 00000000 | 0x0 | 12 | 00000000 | 0x0 |
| Buffers | 13 | 00000000 | 0x0 | 13 | 00000000 | 0x0 |
| | 14 | 00000000 | 0x0 | 14 | 00000000 | 0x0 |
| | 15 | 00000000 | 0x0 | 15 | 00000000 | 0x0 |
+---------+------+--------------+--------+------+--------------+--------+
| | 16 | 70024000 | 0x1000 | 16 | 7002C000 | 0x1000 |
| | 17 | 70025000 | 0x1000 | 17 | 7002D000 | 0x1000 |
| | 18 | 70026000 | 0x1000 | 18 | 7002E000 | 0x1000 |
| Their | 19 | 70027000 | 0x1000 | 19 | 7002F000 | 0x1000 |
| LI | 20 | 00000000 | 0x0 | 20 | 00000000 | 0x0 |
| Buffers | 21 | 00000000 | 0x0 | 21 | 00000000 | 0x0 |
| | 22 | 00000000 | 0x0 | 22 | 00000000 | 0x0 |
| | 23 | 00000000 | 0x0 | 23 | 00000000 | 0x0 |
+---------+------+--------------+--------+------+--------------+--------+
--> here 16, 17, 18, 19 overlapping with below express buffer
+-----+-----------------------------------------------+
| | SLICE 0 | SLICE 1 |
| +------------+----------+------------+----------+
| | Start addr | End addr | Start addr | End addr |
+-----+------------+----------+------------+----------+
| EXP | 70024000 | 70028000 | 7002C000 | 70030000 | <-- Overlapping
| PRE | 70030000 | 70033800 | 70034000 | 70037800 |
+-----+------------+----------+------------+----------+
+---------------------+----------+----------+
| | SLICE 0 | SLICE 1 |
+---------------------+----------+----------+
| Default Drop Offset | 00000000 | 00000000 | <-- Field not configured
+---------------------+----------+----------+
-> Allocation this patch brings:
+---------+-------------------------------------------------------------+
| | SLICE 0 | SLICE 1 |
| +------+--------------+--------+------+--------------+--------+
| | Slot | Base Address | Size | Slot | Base Address | Size |
|---------+------+--------------+--------+------+--------------+--------+
| | 0 | 70000000 | 0x2000 | 0 | 70040000 | 0x2000 |
| | 1 | 70002000 | 0x2000 | 1 | 70042000 | 0x2000 |
| | 2 | 70004000 | 0x2000 | 2 | 70044000 | 0x2000 |
| FWD | 3 | 70006000 | 0x2000 | 3 | 70046000 | 0x2000 |
| Buffers | 4 | 70008000 | 0x2000 | 4 | 70048000 | 0x2000 |
| | 5 | 7000A000 | 0x2000 | 5 | 7004A000 | 0x2000 |
| | 6 | 7000C000 | 0x2000 | 6 | 7004C000 | 0x2000 |
| | 7 | 7000E000 | 0x2000 | 7 | 7004E000 | 0x2000 |
+---------+------+--------------+--------+------+--------------+--------+
| | 8 | 70010000 | 0x1000 | 8 | 70050000 | 0x1000 |
| | 9 | 70011000 | 0x1000 | 9 | 70051000 | 0x1000 |
| | 10 | 70012000 | 0x1000 | 10 | 70052000 | 0x1000 |
| Our | 11 | 70013000 | 0x1000 | 11 | 70053000 | 0x1000 |
| LI | 12 | 00000000 | 0x0 | 12 | 00000000 | 0x0 |
| Buffers | 13 | 00000000 | 0x0 | 13 | 00000000 | 0x0 |
| | 14 | 00000000 | 0x0 | 14 | 00000000 | 0x0 |
| | 15 | 00000000 | 0x0 | 15 | 00000000 | 0x0 |
+---------+------+--------------+--------+------+--------------+--------+
| | 16 | 70014000 | 0x1000 | 16 | 70054000 | 0x1000 |
| | 17 | 70015000 | 0x1000 | 17 | 70055000 | 0x1000 |
| | 18 | 70016000 | 0x1000 | 18 | 70056000 | 0x1000 |
| Their | 19 | 70017000 | 0x1000 | 19 | 70057000 | 0x1000 |
| LI | 20 | 00000000 | 0x0 | 20 | 00000000 | 0x0 |
| Buffers | 21 | 00000000 | 0x0 | 21 | 00000000 | 0x0 |
| | 22 | 00000000 | 0x0 | 22 | 00000000 | 0x0 |
| | 23 | 00000000 | 0x0 | 23 | 00000000 | 0x0 |
+---------+------+--------------+--------+------+--------------+--------+
+-----+-----------------------------------------------+
| | SLICE 0 | SLICE 1 |
| +------------+----------+------------+----------+
| | Start addr | End addr | Start addr | End addr |
+-----+------------+----------+------------+----------+
| EXP | 70018000 | 7001C000 | 70058000 | 7005C000 |
| PRE | 7001C000 | 7001F800 | 7005C000 | 7005F800 |
+-----+------------+----------+------------+----------+
+---------------------+----------+----------+
| | SLICE 0 | SLICE 1 |
+---------------------+----------+----------+
| Default Drop Offset | 7001F800 | 7005F800 |
+---------------------+----------+----------+
Rootcause: missing buffer configuration for Express frames in
function: prueth_fw_offload_buffer_setup()
Details:
Driver implements two distinct buffer configuration functions that are
invoked based on the driver state and ICSSG firmware:-
- prueth_fw_offload_buffer_setup()
- prueth_emac_buffer_setup()
During initialization, driver creates standard network interfaces
(netdevs) and configures buffers via prueth_emac_buffer_setup().
This function properly allocates and configures all required memory
regions including:
- LI buffers
- Express packet buffers
- Preemptible packet buffers
However, when the driver transitions to an offload mode (switch/HSR/PRP),
buffer reconfiguration is handled by prueth_fw_offload_buffer_setup().
This function does not reconfigure the buffer regions required for
Express packets, leading to incorrect buffer allocation.
Fixes: abd5576b9c57 ("net: ti: icssg-prueth: Add support for ICSSG switch firmware")
Signed-off-by: Himanshu Mittal <h-mittal1@ti.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250717094220.546388-1-h-mittal1@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The fsl_mc_get_endpoint() function uses device_find_child() for
localization, which implicitly calls get_device() to increment the
device's reference count before returning the pointer. However, the
caller dpaa2_switch_port_connect_mac() fails to properly release this
reference in multiple scenarios. We should call put_device() to
decrement reference count properly.
As comment of device_find_child() says, 'NOTE: you will need to drop
the reference with put_device() after use'.
Found by code review.
Cc: stable@vger.kernel.org
Fixes: 84cba72956fd ("dpaa2-switch: integrate the MAC endpoint support")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250717022309.3339976-3-make24@iscas.ac.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The fsl_mc_get_endpoint() function uses device_find_child() for
localization, which implicitly calls get_device() to increment the
device's reference count before returning the pointer. However, the
caller dpaa2_eth_connect_mac() fails to properly release this
reference in multiple scenarios. We should call put_device() to
decrement reference count properly.
As comment of device_find_child() says, 'NOTE: you will need to drop
the reference with put_device() after use'.
Found by code review.
Cc: stable@vger.kernel.org
Fixes: 719479230893 ("dpaa2-eth: add MAC/PHY support through phylink")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250717022309.3339976-2-make24@iscas.ac.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a new SKB drop reason (SKB_DROP_REASON_PFMEMALLOC) to track packets
dropped due to memory pressure. In production environments, we've observed
memory exhaustion reported by memory layer stack traces, but these drops
were not properly tracked in the SKB drop reason infrastructure.
While most network code paths now properly report pfmemalloc drops, some
protocol-specific socket implementations still use sk_filter() without
drop reason tracking:
- Bluetooth L2CAP sockets
- CAIF sockets
- IUCV sockets
- Netlink sockets
- SCTP sockets
- Unix domain sockets
These remaining cases represent less common paths and could be converted
in a follow-up patch if needed. The current implementation provides
significantly improved observability into memory pressure events in the
network stack, especially for key protocols like TCP and UDP, helping to
diagnose problems in production environments.
Reported-by: Matt Fleming <mfleming@cloudflare.com>
Signed-off-by: Jesper Dangaard Brouer <hawk@kernel.org>
Link: https://patch.msgid.link/175268316579.2407873.11634752355644843509.stgit@firesoul
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge BPF and other fixes after downstream PR.
No conflicts.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Remove hw_rx_no_dma_resources and eitr_param fields from struct
ixgbevf_adapter since these fields are never referenced in the driver.
Note that the interrupt throttle rate is controlled by the
rx_itr_setting and tx_itr_setting variables.
This change simplifies the ixgbevf driver by removing unused fields,
which improves maintainability.
Signed-off-by: Yuto Ohnuki <ytohnuki@amazon.com>
Reviewed-by: Dawid Osuchowski <dawid.osuchowski@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Remove following unused fields from struct igbvf_adapter that are never
referenced in the driver.
- blink_timer
- eeprom_wol
- fc_autoneg
- int_mode
- led_status
- mng_vlan_id
- polling_interval
- rx_dma_failed
- test_icr
- test_rx_ring
- test_tx_ring
- tx_dma_failed
- tx_fifo_head
- tx_fifo_size
- tx_head_addr
Also removed the following fields from struct igbvf_adapter since they
are never read or used after initialization by igbvf_probe() and igbvf_sw_init().
- bd_number
- rx_abs_int_delay
- tx_abs_int_delay
- rx_int_delay
- tx_int_delay
This changes simplify the igbvf driver by removing unused fields, which
improves maintenability.
Tested-by: Kohei Enju <enjuk@amazon.com>
Signed-off-by: Yuto Ohnuki <ytohnuki@amazon.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Introduce support for a lowest priority wildcard (catch-all) rule in
ethtool's Network Flow Classification (NFC) for the igc driver. The
wildcard rule directs all unmatched network traffic, including traffic not
captured by Receive Side Scaling (RSS), to a specified queue. This
functionality utilizes the Default Queue feature available in I225/I226
hardware.
The implementation has been validated on Intel ADL-S systems with two
back-to-back connected I226 network interfaces.
Testing Procedure:
1. On the Device Under Test (DUT), verify the initial statistic:
$ ethtool -S enp1s0 | grep rx_q.*packets
rx_queue_0_packets: 0
rx_queue_1_packets: 0
rx_queue_2_packets: 0
rx_queue_3_packets: 0
2. From the Link Partner, send 10 ARP packets:
$ arping -c 10 -I enp170s0 169.254.1.2
3. On the DUT, verify the packet reception on Queue 0:
$ ethtool -S enp1s0 | grep rx_q.*packets
rx_queue_0_packets: 10
rx_queue_1_packets: 0
rx_queue_2_packets: 0
rx_queue_3_packets: 0
4. On the DUT, add a wildcard rule to route all packets to Queue 3:
$ sudo ethtool -N enp1s0 flow-type ether queue 3
5. From the Link Partner, send another 10 ARP packets:
$ arping -c 10 -I enp170s0 169.254.1.2
6. Now, packets are routed to Queue 3 by the wildcard (Default Queue) rule:
$ ethtool -S enp1s0 | grep rx_q.*packets
rx_queue_0_packets: 10
rx_queue_1_packets: 0
rx_queue_2_packets: 0
rx_queue_3_packets: 10
7. On the DUT, add a EtherType rule to route ARP packet to Queue 1:
$ sudo ethtool -N enp1s0 flow-type ether proto 0x0806 queue 1
8. From the Link Partner, send another 10 ARP packets:
$ arping -c 10 -I enp170s0 169.254.1.2
9. Now, packets are routed to Queue 1 by the EtherType rule because it is
higher priority than the wildcard (Default Queue) rule:
$ ethtool -S enp1s0 | grep rx_q.*packets
rx_queue_0_packets: 10
rx_queue_1_packets: 10
rx_queue_2_packets: 0
rx_queue_3_packets: 10
10. On the DUT, delete all the NFC rules:
$ sudo ethtool -N enp1s0 delete 63
$ sudo ethtool -N enp1s0 delete 64
11. From the Link Partner, send another 10 ARP packets:
$ arping -c 10 -I enp170s0 169.254.1.2
12. Now, packets are routed to Queue 0 because the value of Default Queue
is reset back to 0:
$ ethtool -S enp1s0 | grep rx_q.*packets
rx_queue_0_packets: 20
rx_queue_1_packets: 10
rx_queue_2_packets: 0
rx_queue_3_packets: 10
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Co-developed-by: Blanco Alcaine Hector <hector.blanco.alcaine@intel.com>
Signed-off-by: Blanco Alcaine Hector <hector.blanco.alcaine@intel.com>
Signed-off-by: Song Yoong Siang <yoong.siang.song@intel.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Move the RSS field definitions related to IPv4 and IPv6 UDP from igc.h to
igc_defines.h to consolidate the RSS field definitions in a single header
file, improving code organization and maintainability.
This refactoring does not alter the functionality of the driver but
enhances the logical grouping of related constants
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: Song Yoong Siang <yoong.siang.song@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
In the VF handling code, parts of the code for lag can be broken out into
helper functions to reduce code duplication. Break this code out into
helper functions
Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Previously the ice_add_prof() took an array of u8 and looped over it with
for_each_set_bit(), examining each 8 bit value as a bitmap.
This was just hard to understand and unnecessary, and was triggering
undefined behavior sanitizers with unaligned accesses within bitmap
fields (on our internal tools/builds). Since the @ptype being passed in
was already declared as a bitmap, refactor this to use native types with
the advantage of simplifying the code to use a single loop.
Co-developed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
CC: Jesse Brandeburg <jbrandeburg@cloudflare.com>
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
E835 is an enhanced version of the E830.
It continues to use the same set of commands, registers and interfaces
as other devices in the 800 Series.
Following device IDs are added:
- 0x1248: Intel(R) Ethernet Controller E835-CC for backplane
- 0x1249: Intel(R) Ethernet Controller E835-CC for QSFP
- 0x124A: Intel(R) Ethernet Controller E835-CC for SFP
- 0x1261: Intel(R) Ethernet Controller E835-C for backplane
- 0x1262: Intel(R) Ethernet Controller E835-C for QSFP
- 0x1263: Intel(R) Ethernet Controller E835-C for SFP
- 0x1265: Intel(R) Ethernet Controller E835-L for backplane
- 0x1266: Intel(R) Ethernet Controller E835-L for QSFP
- 0x1267: Intel(R) Ethernet Controller E835-L for SFP
Reviewed-by: Konrad Knitter <konrad.knitter@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Dawid Osuchowski <dawid.osuchowski@linux.intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Introduce the ICE_AQC_PORT_OPT_MAX_LANE_40G constant and update the code
to process this new option in both the devlink and the Admin Queue Command
GET PORT OPTION (opcode 0x06EA) message, similar to existing constants like
ICE_AQC_PORT_OPT_MAX_LANE_50G, ICE_AQC_PORT_OPT_MAX_LANE_100G, and so on.
This feature allows the driver to correctly report configuration options
for 2x40G on E823 and other cards in the future via devlink.
Example command:
devlink port split pci/0000:01:00.0/0 count 2
Example dmesg:
ice 0000:01:00.0: Available port split options and max port speeds (Gbps):
ice 0000:01:00.0: Status Split Quad 0 Quad 1
ice 0000:01:00.0: count L0 L1 L2 L3 L4 L5 L6 L7
ice 0000:01:00.0: 2 40 - - - 40 - - -
ice 0000:01:00.0: 2 50 - 50 - - - - -
ice 0000:01:00.0: 4 25 25 25 25 - - - -
ice 0000:01:00.0: 4 25 25 - - 25 25 - -
ice 0000:01:00.0: Active 8 10 10 10 10 10 10 10 10
ice 0000:01:00.0: 1 100 - - - - - - -
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The IRQ coalescing config currently reside only inside struct
idpf_q_vector. However, all idpf_q_vector structs are de-allocated and
re-allocated during resets. This leads to user-set coalesce configuration
to be lost.
Add new fields to struct idpf_vport_user_config_data to save the user
settings and re-apply them after reset.
Reviewed-by: Madhu Chittim <madhu.chittim@intel.com>
Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Add cross timestamp support through virtchnl mailbox messages and directly,
through PCIe BAR registers. Cross timestamping assumes that both system
time and device clock time values are cached simultaneously, what is
triggered by HW. Feature is enabled for both ARM and x86 archs.
Signed-off-by: Milena Olech <milena.olech@intel.com>
Reviewed-by: Karol Kolacinski <karol.kolacinski@intel.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Use the new virtchnl2 OP codes to communicate with the Control Plane to
add flow steering filters. We add the basic functionality for add/delete
with TCP/UDP IPv4 only. Support for other OP codes and protocols will be
added later.
Standard 'ethtool -N|--config-ntuple' should be used, for example:
# ethtool -N ens801f0d1 flow-type tcp4 src-ip 10.0.0.1 action 6
to route all IPv4/TCP traffic from IP 10.0.0.1 to queue 6.
Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Add opcodes and corresponding message structure to add and delete
flow steering rules. Flow steering enables configuration
of rules to take an action or subset of actions based on a match
criteria. Actions could be redirect to queue, redirect to queue
group, drop packet or mark.
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Co-developed-by: Dinesh Kumar <dinesh.kumar@intel.com>
Signed-off-by: Dinesh Kumar <dinesh.kumar@intel.com>
Signed-off-by: Sudheer Mogilappagari <sudheer.mogilappagari@intel.com>
Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The "enum virtchnl2_cap_rss" will be used for negotiating flow
steering capabilities. Instead of adding a new enum, rename
virtchnl2_cap_rss to virtchnl2_flow_types. Also rename the enum's
constants.
Flow steering will use this enum in the next patches.
Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Update the host logic to dynamically parse WMI extended service
bits beyond the current fixed size of 4 * 32 (i.e., 384 bits)
after WMI_MAX_EXT_SERVICE (256).
The current implementation misses service bits advertised beyond this
range, leading to not enabling some of the features supported by firmware.
Implement dynamic length parsing to iterate up to the maximum
service bit index advertised by the firmware.
This ensures all supported features are correctly recognized and enabled.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00217-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Tamizh Chelvam Raja <tamizh.raja@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250717173539.2523396-3-tamizh.raja@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Currently there is no endian conversion in ath12k_wmi_tlv_services_parser()
so the service bit parsing will be incorrect on a big endian platform and
to fix this by using appropriate endian conversion.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00217-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Fixes: 342527f35338 ("wifi: ath12k: Add support to parse new WMI event for 6 GHz regulatory")
Signed-off-by: Tamizh Chelvam Raja <tamizh.raja@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250717173539.2523396-2-tamizh.raja@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
If probe fails before ieee80211_register_hw() is successfully done,
ieee80211_unregister_hw() will be called anyway. This may lead to various
bugs as the implementation of ieee80211_unregister_hw() assumes that
ieee80211_register_hw() has been called.
Divide error handling section into relevant subsections, so that
ieee80211_unregister_hw() is called only when it is appropriate. Correct
the order of the calls: ieee80211_unregister_hw() should go before
plfxlc_mac_release(). Also move ieee80211_free_hw() to plfxlc_mac_release()
as it supposed to be the opposite to plfxlc_mac_alloc_hw() that calls
ieee80211_alloc_hw().
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Fixes: 68d57a07bfe5 ("wireless: add plfxlc driver for pureLiFi X, XL, XC devices")
Signed-off-by: Murad Masimov <m.masimov@mt-integration.ru>
Link: https://patch.msgid.link/20250321185226.71-3-m.masimov@mt-integration.ru
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add the SDIO ID and firmware matching for the 43751 device.
Based on the previous work from Marc Gonzalez <mgonzalez@freebox.fr>.
Tested on an i.MX6DL board connected to an AP6398SV chip with the
brcmfmac43752-sdio.bin firmware taken from:
https://source.puri.sm/Librem5/firmware-brcm43752-nonfree
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>>
Link: https://patch.msgid.link/20250712215307.1310802-1-festevam@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Use min() to reduce the code and improve its readability.
Reviewed-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Link: https://patch.msgid.link/20250715121721.266713-7-rongqianfeng@vivo.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Use max_t() to reduce the code and improve its readability.
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Reviewed-by: Jeff Chen <jeff.chen_1@nxp.con>
Link: https://patch.msgid.link/20250715121721.266713-6-rongqianfeng@vivo.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Use min() to reduce the code and improve its readability.
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>>
Link: https://patch.msgid.link/20250715121721.266713-5-rongqianfeng@vivo.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
