| Age | Commit message (Collapse) | Author |
|---|
|
- Rename DOE 'protocol' to 'feature' to follow spec terminology (Alistair
Francis)
- Expose supported DOE features via sysfs (Alistair Francis)
- Allow DOE support to be enabled even if CXL isn't enabled (Alistair
Francis)
* pci/doe:
PCI/DOE: Allow enabling DOE without CXL
PCI/DOE: Expose DOE features via sysfs
PCI/DOE: Rename Discovery Response Data Object Contents to type
PCI/DOE: Rename DOE protocol to feature
|
|
- Enlarge the devres table[] to accommodate bridge windows, ROM, IOV BARs,
etc (Philipp Stanner)
- Validate BAR index in devres interfaces (Philipp Stanner)
* pci/devres:
PCI: Check BAR index for validity
PCI: Fix wrong length of devres array
|
|
- Add set_pcie_speed.sh to TEST_PROGS to fix issue when executing the
set_pcie_cooling_state.sh test case (Yi Lai)
- Fix the pcie_bwctrl_select_speed() return value in cases where a
non-compliant device doesn't advertise valid supported speeds (Ilpo
Järvinen)
- Avoid a NULL pointer dereference when we run out of bus numbers to assign
for a bridge secondary bus (Lukas Wunner)
* pci/bwctrl:
PCI/bwctrl: Fix NULL pointer dereference on bus number exhaustion
PCI/bwctrl: Fix pcie_bwctrl_select_speed() return type
selftests/pcie_bwctrl: Add 'set_pcie_speed.sh' to TEST_PROGS
|
|
- Delay pcie_link_state deallocation to avoid dangling pointers that cause
invalid references during hot-unplug (Daniel Stodden)
* pci/aspm:
PCI/ASPM: Fix link state exit during switch upstream function removal
|
|
- Implement local aer_printk() since AER is the only place that prints a
message with level depending on the error severity (Ilpo Järvinen)
* pci/aer:
PCI/ERR: Handle TLP Log in Flit mode
PCI: Track Flit Mode Status & print it with link status
PCI/AER: Descope pci_printk() to aer_printk()
|
|
The arg_count parameter to syscon_regmap_lookup_by_phandle_args()
represents the number of argument cells following the phandle. In this
case, the number of arguments should be 1 instead of 2 since the dt
property looks like this:
fsl,pcie-scfg = <&scfg 0>;
Without this fix, layerscape-pcie fails with the following message on
LS1043A:
OF: /soc/pcie@3500000: phandle scfg@1570000 needs 2, found 1
layerscape-pcie 3500000.pcie: No syscfg phandle specified
layerscape-pcie 3500000.pcie: probe with driver layerscape-pcie failed with error -22
Link: https://lore.kernel.org/r/20250327151949.2765193-1-ioana.ciornei@nxp.com
Fixes: 149fc35734e5 ("PCI: layerscape: Use syscon_regmap_lookup_by_phandle_args")
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Roy Zang <Roy.Zang@nxp.com>
Cc: stable@vger.kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu updates from Joerg Roedel:
"Core iommufd dependencies from Jason:
- Change the iommufd fault handle into an always present hwpt handle
in the domain
- Give iommufd its own SW_MSI implementation along with some IRQ
layer rework
- Improvements to the handle attach API
Core fixes for probe-issues from Robin
Intel VT-d changes:
- Checking for SVA support in domain allocation and attach paths
- Move PCI ATS and PRI configuration into probe paths
- Fix a pentential hang on reboot -f
- Miscellaneous cleanups
AMD-Vi changes:
- Support for up to 2k IRQs per PCI device function
- Set of smaller fixes
ARM-SMMU changes:
- SMMUv2 devicetree binding updates for Qualcomm implementations
(QCS8300 GPU and MSM8937)
- Clean up SMMUv2 runtime PM implementation to help with wider rework
of pm_runtime_put_autosuspend()
Rockchip driver changes:
- Driver adjustments for recent DT probing changes
S390 IOMMU changes:
- Support for IOMMU passthrough
Apple Dart changes:
- Driver adjustments to meet ISP device requirements
- Null-ptr deref fix
- Disable subpage protection for DART 1"
* tag 'iommu-updates-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux: (54 commits)
iommu/vt-d: Fix possible circular locking dependency
iommu/vt-d: Don't clobber posted vCPU IRTE when host IRQ affinity changes
iommu/vt-d: Put IRTE back into posted MSI mode if vCPU posting is disabled
iommu: apple-dart: fix potential null pointer deref
iommu/rockchip: Retire global dma_dev workaround
iommu/rockchip: Register in a sensible order
iommu/rockchip: Allocate per-device data sensibly
iommu/mediatek-v1: Support COMPILE_TEST
iommu/amd: Enable support for up to 2K interrupts per function
iommu/amd: Rename DTE_INTTABLEN* and MAX_IRQS_PER_TABLE macro
iommu/amd: Replace slab cache allocator with page allocator
iommu/amd: Introduce generic function to set multibit feature value
iommu: Don't warn prematurely about dodgy probes
iommu/arm-smmu: Set rpm auto_suspend once during probe
dt-bindings: arm-smmu: Document QCS8300 GPU SMMU
iommu: Get DT/ACPI parsing into the proper probe path
iommu: Keep dev->iommu state consistent
iommu: Resolve ops in iommu_init_device()
iommu: Handle race with default domain setup
iommu: Unexport iommu_fwspec_free()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull MSI irq fix from Thomas Gleixner:
"An urgent fix for the XEN related PCI/MSI changes:
XEN used a global variable to disable the masking of MSI interrupts as
XEN handles that on the hypervisor side. This turned out to be a
problem with VMD as the PCI devices behind a VMD bridge are not always
handled by the hypervisor and then require masking by guest.
To solve this the global variable was replaced by a interrupt domain
specific flag, which is set by the generic XEN PCI/MSI domain, but not
by VMD or any other domain in the system.
So far, so good. But the implementation (and the reviewer) missed the
fact, that accessing the domain flag cannot be done directly because
there are at least two situations, where this fails.
Legacy architectures are not providing interrupt domains at all. The
new MSI parent domains do not require to have a domain info pointer.
Both cases result in a unconditional NULL pointer derefence.
The PCI/MSI code already has a function to query the MSI domain
specific flag in a safe way, which handles all possible cases of
PCI/MSI backends.
So the fix it simply to replace the open coded checks by invoking the
safe helper to query the flag"
* tag 'irq-urgent-2025-03-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
PCI/MSI: Handle the NOMASK flag correctly for all PCI/MSI backends
|
|
The conversion of the XEN specific global variable pci_msi_ignore_mask to a
MSI domain flag, missed the facts that:
1) Legacy architectures do not provide a interrupt domain
2) Parent MSI domains do not necessarily have a domain info attached
Both cases result in an unconditional NULL pointer dereference. This was
unfortunatly missed in review and testing revealed it late.
Cure this by using the existing pci_msi_domain_supports() helper, which
handles all possible cases correctly.
Fixes: c3164d2e0d18 ("PCI/MSI: Convert pci_msi_ignore_mask to per MSI domain flag")
Reported-by: Daniel Gomez <da.gomez@kernel.org>
Reported-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Borislav Petkov <bp@alien8.de>
Tested-by: Daniel Gomez <da.gomez@kernel.org>
Link: https://lore.kernel.org/all/87iknwyp2o.ffs@tglx
Closes: https://lore.kernel.org/all/qn7fzggcj6qe6r6gdbwcz23pzdz2jx64aldccmsuheabhmjgrt@tawf5nfwuvw7
|
|
Commit e49ad667815d ("PCI: j721e: Add TI J784S4 PCIe configuration")
assigned the value of .linkdown_irq_regfield for the J784S4 SoC as the
"LINK_DOWN" macro corresponding to BIT(1), and as a result, the Link
Down interrupts on J784S4 SoC are missed.
According to the Technical Reference Manual and Register Documentation
for the J784S4 SoC[1], BIT(1) corresponds to "ENABLE_SYS_EN_PCIE_DPA_1",
which is not the correct field for the link-state interrupt. Instead, it
is BIT(10) of the "PCIE_INTD_ENABLE_REG_SYS_2" register that corresponds
to the link-state field named as "ENABLE_SYS_EN_PCIE_LINK_STATE".
Thus, set .linkdown_irq_regfield to the macro "J7200_LINK_DOWN", which
expands to BIT(10) and was first defined for the J7200 SoC. Other SoCs
already reuse this macro since it accurately represents the "link-state"
field in their respective "PCIE_INTD_ENABLE_REG_SYS_2" register.
1: https://www.ti.com/lit/zip/spruj52
Fixes: e49ad667815d ("PCI: j721e: Add TI J784S4 PCIe configuration")
Cc: stable@vger.kernel.org
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
[kwilczynski: commit log, add a missing .linkdown_irq_regfield member
set to the J7200_LINK_DOWN macro to struct j7200_pcie_ep_data]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Link: https://lore.kernel.org/r/20250305132018.2260771-1-s-vadapalli@ti.com
|
|
Expose the supported IRQ types in the CAPS register.
This way, the host side driver (drivers/misc/pci_endpoint_test.c) can
know which IRQ types that the endpoint supports.
The host side driver will make use of this information in a follow-up
commit.
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Link: https://lore.kernel.org/r/20250310111016.859445-15-cassel@kernel.org
|
|
Neither RK3568 or RK3588 supports INTx interrupts.
Since epc_features is zero initialized, this is strictly not needed.
However, setting intx_capable explicitly to false makes it more clear
that neither RK3568 or RK3588 supports INTx interrupts.
No functional change.
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Link: https://lore.kernel.org/r/20250310111016.859445-14-cassel@kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These are dominated by cpufreq updates which in turn are dominated by
updates related to boost support in the core and drivers and
amd-pstate driver optimizations.
Apart from the above, there are some cpuidle updates including a
rework of the most recent idle intervals handling in the venerable
menu governor that leads to significant improvements in some
performance benchmarks, as the governor is now more likely to predict
a shorter idle duration in some cases, and there are updates of the
core device power management code, mostly related to system suspend
and resume, that should help to avoid potential issues arising when
the drivers of devices depending on one another want to use different
optimizations.
There is also a usual collection of assorted fixes and cleanups,
including removal of some unused code.
Specifics:
- Manage sysfs attributes and boost frequencies efficiently from
cpufreq core to reduce boilerplate code in drivers (Viresh Kumar)
- Minor cleanups to cpufreq drivers (Aaron Kling, Benjamin Schneider,
Dhananjay Ugwekar, Imran Shaik, zuoqian)
- Migrate some cpufreq drivers to using for_each_present_cpu() (Jacky
Bai)
- cpufreq-qcom-hw DT binding fixes (Krzysztof Kozlowski)
- Use str_enable_disable() helper in cpufreq_online() (Lifeng Zheng)
- Optimize the amd-pstate driver to avoid cases where call paths end
up calling the same writes multiple times and needlessly caching
variables through code reorganization, locking overhaul and tracing
adjustments (Mario Limonciello, Dhananjay Ugwekar)
- Make it possible to avoid enabling capacity-aware scheduling (CAS)
in the intel_pstate driver and relocate a check for out-of-band
(OOB) platform handling in it to make it detect OOB before checking
HWP availability (Rafael Wysocki)
- Fix dbs_update() to avoid inadvertent conversions of negative
integer values to unsigned int which causes CPU frequency selection
to be inaccurate in some cases when the "conservative" cpufreq
governor is in use (Jie Zhan)
- Update the handling of the most recent idle intervals in the menu
cpuidle governor to prevent useful information from being discarded
by it in some cases and improve the prediction accuracy (Rafael
Wysocki)
- Make it possible to tell the intel_idle driver to ignore its
built-in table of idle states for the given processor, clean up the
handling of auto-demotion disabling on Baytrail and Cherrytrail
chips in it, and update its MAINTAINERS entry (David Arcari, Artem
Bityutskiy, Rafael Wysocki)
- Make some cpuidle drivers use for_each_present_cpu() instead of
for_each_possible_cpu() during initialization to avoid issues
occurring when nosmp or maxcpus=0 are used (Jacky Bai)
- Clean up the Energy Model handling code somewhat (Rafael Wysocki)
- Use kfree_rcu() to simplify the handling of runtime Energy Model
updates (Li RongQing)
- Add an entry for the Energy Model framework to MAINTAINERS as
properly maintained (Lukasz Luba)
- Address RCU-related sparse warnings in the Energy Model code
(Rafael Wysocki)
- Remove ENERGY_MODEL dependency on SMP and allow it to be selected
when DEVFREQ is set without CPUFREQ so it can be used on a wider
range of systems (Jeson Gao)
- Unify error handling during runtime suspend and runtime resume in
the core to help drivers to implement more consistent runtime PM
error handling (Rafael Wysocki)
- Drop a redundant check from pm_runtime_force_resume() and rearrange
documentation related to __pm_runtime_disable() (Rafael Wysocki)
- Rework the handling of the "smart suspend" driver flag in the PM
core to avoid issues hat may occur when drivers using it depend on
some other drivers and clean up the related PM core code (Rafael
Wysocki, Colin Ian King)
- Fix the handling of devices with the power.direct_complete flag set
if device_suspend() returns an error for at least one device to
avoid situations in which some of them may not be resumed (Rafael
Wysocki)
- Use mutex_trylock() in hibernate_compressor_param_set() to avoid a
possible deadlock that may occur if the "compressor" hibernation
module parameter is accessed during the registration of a new
ieee80211 device (Lizhi Xu)
- Suppress sleeping parent warning in device_pm_add() in the case
when new children are added under a device with the
power.direct_complete set after it has been processed by
device_resume() (Xu Yang)
- Remove needless return in three void functions related to system
wakeup (Zijun Hu)
- Replace deprecated kmap_atomic() with kmap_local_page() in the
hibernation core code (David Reaver)
- Remove unused helper functions related to system sleep (David Alan
Gilbert)
- Clean up s2idle_enter() so it does not lock and unlock CPU offline
in vain and update comments in it (Ulf Hansson)
- Clean up broken white space in dpm_wait_for_children() (Geert
Uytterhoeven)
- Update the cpupower utility to fix lib version-ing in it and memory
leaks in error legs, remove hard-coded values, and implement CPU
physical core querying (Thomas Renninger, John B. Wyatt IV, Shuah
Khan, Yiwei Lin, Zhongqiu Han)"
* tag 'pm-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (139 commits)
PM: sleep: Fix bit masking operation
dt-bindings: cpufreq: cpufreq-qcom-hw: Narrow properties on SDX75, SA8775p and SM8650
dt-bindings: cpufreq: cpufreq-qcom-hw: Drop redundant minItems:1
dt-bindings: cpufreq: cpufreq-qcom-hw: Add missing constraint for interrupt-names
dt-bindings: cpufreq: cpufreq-qcom-hw: Add QCS8300 compatible
cpufreq: Init cpufreq only for present CPUs
PM: sleep: Fix handling devices with direct_complete set on errors
cpuidle: Init cpuidle only for present CPUs
PM: clk: Remove unused pm_clk_remove()
PM: sleep: core: Fix indentation in dpm_wait_for_children()
PM: s2idle: Extend comment in s2idle_enter()
PM: s2idle: Drop redundant locks when entering s2idle
PM: sleep: Remove unused pm_generic_ wrappers
cpufreq: tegra186: Share policy per cluster
cpupower: Make lib versioning scheme more obvious and fix version link
PM: EM: Rework the depends on for CONFIG_ENERGY_MODEL
PM: EM: Address RCU-related sparse warnings
cpupower: Implement CPU physical core querying
pm: cpupower: remove hard-coded topology depth values
pm: cpupower: Fix cmd_monitor() error legs to free cpu_topology
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen updates from Juergen Gross:
- cleanup: remove an used function
- add support for a XenServer specific virtual PCI device
- fix the handling of a sparse Xen hypervisor symbol table
- avoid warnings when building the kernel with gcc 15
- fix use of devices behind a VMD bridge when running as a Xen PV dom0
* tag 'for-linus-6.15-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
PCI/MSI: Convert pci_msi_ignore_mask to per MSI domain flag
PCI: vmd: Disable MSI remapping bypass under Xen
xen/pci: Do not register devices with segments >= 0x10000
xen/pciback: Remove unused pcistub_get_pci_dev
xenfs/xensyms: respect hypervisor's "next" indication
xen/mcelog: Add __nonstring annotations for unterminated strings
xen: Add support for XenServer 6.1 platform device
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull MSI irq updates from Thomas Gleixner:
- Switch the MSI descriptor locking to guards
- Replace the broken PCI/TPH implementation, which lacks any form of
serialization against concurrent modifications with a properly
serialized mechanism in the PCI/MSI core code
- Replace the MSI descriptor abuse in the SCSI/UFS Qualcom driver with
dedicated driver internal storage
* tag 'irq-msi-2025-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq/msi: Rename msi_[un]lock_descs()
scsi: ufs: qcom: Remove the MSI descriptor abuse
PCI/TPH: Replace the broken MSI-X control word update
PCI/MSI: Provide a sane mechanism for TPH
PCI: hv: Switch MSI descriptor locking to guard()
PCI/MSI: Switch to MSI descriptor locking to guard()
NTB/msi: Switch MSI descriptor locking to lock guard()
soc: ti: ti_sci_inta_msi: Switch MSI descriptor locking to guard()
genirq/msi: Use lock guards for MSI descriptor locking
cleanup: Provide retain_ptr()
genirq/msi: Make a few functions static
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core x86 updates from Ingo Molnar:
"x86 CPU features support:
- Generate the <asm/cpufeaturemasks.h> header based on build config
(H. Peter Anvin, Xin Li)
- x86 CPUID parsing updates and fixes (Ahmed S. Darwish)
- Introduce the 'setcpuid=' boot parameter (Brendan Jackman)
- Enable modifying CPU bug flags with '{clear,set}puid=' (Brendan
Jackman)
- Utilize CPU-type for CPU matching (Pawan Gupta)
- Warn about unmet CPU feature dependencies (Sohil Mehta)
- Prepare for new Intel Family numbers (Sohil Mehta)
Percpu code:
- Standardize & reorganize the x86 percpu layout and related cleanups
(Brian Gerst)
- Convert the stackprotector canary to a regular percpu variable
(Brian Gerst)
- Add a percpu subsection for cache hot data (Brian Gerst)
- Unify __pcpu_op{1,2}_N() macros to __pcpu_op_N() (Uros Bizjak)
- Construct __percpu_seg_override from __percpu_seg (Uros Bizjak)
MM:
- Add support for broadcast TLB invalidation using AMD's INVLPGB
instruction (Rik van Riel)
- Rework ROX cache to avoid writable copy (Mike Rapoport)
- PAT: restore large ROX pages after fragmentation (Kirill A.
Shutemov, Mike Rapoport)
- Make memremap(MEMREMAP_WB) map memory as encrypted by default
(Kirill A. Shutemov)
- Robustify page table initialization (Kirill A. Shutemov)
- Fix flush_tlb_range() when used for zapping normal PMDs (Jann Horn)
- Clear _PAGE_DIRTY for kernel mappings when we clear _PAGE_RW
(Matthew Wilcox)
KASLR:
- x86/kaslr: Reduce KASLR entropy on most x86 systems, to support PCI
BAR space beyond the 10TiB region (CONFIG_PCI_P2PDMA=y) (Balbir
Singh)
CPU bugs:
- Implement FineIBT-BHI mitigation (Peter Zijlstra)
- speculation: Simplify and make CALL_NOSPEC consistent (Pawan Gupta)
- speculation: Add a conditional CS prefix to CALL_NOSPEC (Pawan
Gupta)
- RFDS: Exclude P-only parts from the RFDS affected list (Pawan
Gupta)
System calls:
- Break up entry/common.c (Brian Gerst)
- Move sysctls into arch/x86 (Joel Granados)
Intel LAM support updates: (Maciej Wieczor-Retman)
- selftests/lam: Move cpu_has_la57() to use cpuinfo flag
- selftests/lam: Skip test if LAM is disabled
- selftests/lam: Test get_user() LAM pointer handling
AMD SMN access updates:
- Add SMN offsets to exclusive region access (Mario Limonciello)
- Add support for debugfs access to SMN registers (Mario Limonciello)
- Have HSMP use SMN through AMD_NODE (Yazen Ghannam)
Power management updates: (Patryk Wlazlyn)
- Allow calling mwait_play_dead with an arbitrary hint
- ACPI/processor_idle: Add FFH state handling
- intel_idle: Provide the default enter_dead() handler
- Eliminate mwait_play_dead_cpuid_hint()
Build system:
- Raise the minimum GCC version to 8.1 (Brian Gerst)
- Raise the minimum LLVM version to 15.0.0 (Nathan Chancellor)
Kconfig: (Arnd Bergmann)
- Add cmpxchg8b support back to Geode CPUs
- Drop 32-bit "bigsmp" machine support
- Rework CONFIG_GENERIC_CPU compiler flags
- Drop configuration options for early 64-bit CPUs
- Remove CONFIG_HIGHMEM64G support
- Drop CONFIG_SWIOTLB for PAE
- Drop support for CONFIG_HIGHPTE
- Document CONFIG_X86_INTEL_MID as 64-bit-only
- Remove old STA2x11 support
- Only allow CONFIG_EISA for 32-bit
Headers:
- Replace __ASSEMBLY__ with __ASSEMBLER__ in UAPI and non-UAPI
headers (Thomas Huth)
Assembly code & machine code patching:
- x86/alternatives: Simplify alternative_call() interface (Josh
Poimboeuf)
- x86/alternatives: Simplify callthunk patching (Peter Zijlstra)
- KVM: VMX: Use named operands in inline asm (Josh Poimboeuf)
- x86/hyperv: Use named operands in inline asm (Josh Poimboeuf)
- x86/traps: Cleanup and robustify decode_bug() (Peter Zijlstra)
- x86/kexec: Merge x86_32 and x86_64 code using macros from
<asm/asm.h> (Uros Bizjak)
- Use named operands in inline asm (Uros Bizjak)
- Improve performance by using asm_inline() for atomic locking
instructions (Uros Bizjak)
Earlyprintk:
- Harden early_serial (Peter Zijlstra)
NMI handler:
- Add an emergency handler in nmi_desc & use it in
nmi_shootdown_cpus() (Waiman Long)
Miscellaneous fixes and cleanups:
- by Ahmed S. Darwish, Andy Shevchenko, Ard Biesheuvel, Artem
Bityutskiy, Borislav Petkov, Brendan Jackman, Brian Gerst, Dan
Carpenter, Dr. David Alan Gilbert, H. Peter Anvin, Ingo Molnar,
Josh Poimboeuf, Kevin Brodsky, Mike Rapoport, Lukas Bulwahn, Maciej
Wieczor-Retman, Max Grobecker, Patryk Wlazlyn, Pawan Gupta, Peter
Zijlstra, Philip Redkin, Qasim Ijaz, Rik van Riel, Thomas Gleixner,
Thorsten Blum, Tom Lendacky, Tony Luck, Uros Bizjak, Vitaly
Kuznetsov, Xin Li, liuye"
* tag 'x86-core-2025-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (211 commits)
zstd: Increase DYNAMIC_BMI2 GCC version cutoff from 4.8 to 11.0 to work around compiler segfault
x86/asm: Make asm export of __ref_stack_chk_guard unconditional
x86/mm: Only do broadcast flush from reclaim if pages were unmapped
perf/x86/intel, x86/cpu: Replace Pentium 4 model checks with VFM ones
perf/x86/intel, x86/cpu: Simplify Intel PMU initialization
x86/headers: Replace __ASSEMBLY__ with __ASSEMBLER__ in non-UAPI headers
x86/headers: Replace __ASSEMBLY__ with __ASSEMBLER__ in UAPI headers
x86/locking/atomic: Improve performance by using asm_inline() for atomic locking instructions
x86/asm: Use asm_inline() instead of asm() in clwb()
x86/asm: Use CLFLUSHOPT and CLWB mnemonics in <asm/special_insns.h>
x86/hweight: Use asm_inline() instead of asm()
x86/hweight: Use ASM_CALL_CONSTRAINT in inline asm()
x86/hweight: Use named operands in inline asm()
x86/stackprotector/64: Only export __ref_stack_chk_guard on CONFIG_SMP
x86/head/64: Avoid Clang < 17 stack protector in startup code
x86/kexec: Merge x86_32 and x86_64 code using macros from <asm/asm.h>
x86/runtime-const: Add the RUNTIME_CONST_PTR assembly macro
x86/cpu/intel: Limit the non-architectural constant_tsc model checks
x86/mm/pat: Replace Intel x86_model checks with VFM ones
x86/cpu/intel: Fix fast string initialization for extended Families
...
|
|
Remove intel_pcie_cpu_addr(), the .cpu_addr_fixup() method, because the dwc
core driver already handles address translation based on the devicetree
description.
[bhelgaas: this does require a minor dts change, but maintainer
Lei Chuan Hua <lchuanhua@maxlinear.com> confirms that the driver is only
used internally to Maxlinear and internal users will update dts:
https://lore.kernel.org/r/BY3PR19MB507667CE7531D863E1E5F8AEBDD82@BY3PR19MB5076.namprd19.prod.outlook.com]
Link: https://lore.kernel.org/r/20250305-intel-v1-1-40db3a685490@nxp.com
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Remove imx_pcie_cpu_addr_fixup, the .cpu_addr_fixup() method, because the
dwc core driver already handles address translation based on the devicetree
description.
Link: https://lore.kernel.org/r/20250315201548.858189-14-helgaas@kernel.org
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Richard Zhu <hongxing.zhu@nxp.com>
|
|
We know the parent_bus_offset, either computed from a DT reg property (the
offset is the CPU physical addr - the 'config'/'addr_space' address on the
parent bus) or from a .cpu_addr_fixup() (which may have used a host bridge
window offset).
Apply that parent_bus_offset instead of calling .cpu_addr_fixup() when
programming the ATU.
This assumes all intermediate addresses are at the same offset from the CPU
physical addresses.
[bhelgaas: commit log]
Link: https://lore.kernel.org/r/20250315201548.858189-13-helgaas@kernel.org
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Most systems' PCIe outbound map windows have non-zero physical addresses,
but the possibility of encountering zero increased after following commit
("PCI: dwc: Use parent_bus_offset").
'ep->outbound_addr[n]', representing 'parent_bus_address', might be 0 on
some hardware, which trims high address bits through bus fabric before
sending to the PCIe controller.
Replace the iteration logic with 'for_each_set_bit()' to ensure only
allocated map windows are iterated when determining the ATU index from a
given address.
Link: https://lore.kernel.org/r/20250315201548.858189-12-helgaas@kernel.org
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Endpoint
┌───────────────────────────────────────────────┐
│ pcie-ep@5f010000 │
│ ┌────────────────┐│
│ │ Endpoint ││
│ │ PCIe ││
│ │ Controller ││
│ bus@5f000000 │ ┌────────►
│ ┌──────────┐ │ │ ││dynamically
│ │ │ Outbound Transfer │ ││allocated
│┌─────┐ │ Bus ┼─────►│ ATU ───────┘ ││PCI Addr
││ │ │ Fabric │Bus │ ││
││ CPU ├───►│ │Addr │ ││
││ │CPU │ │0x8000_0000 ││
│└─────┘Addr└──────────┘ │ ││
│ 0x7000_0000 └────────────────┘│
└───────────────────────────────────────────────┘
bus@5f000000 {
compatible = "simple-bus";
ranges = <0x80000000 0x0 0x70000000 0x10000000>;
pcie-ep@5f010000 {
reg = <0x80000000 0x10000000>;
reg-names ="addr_space";
...
};
...
};
In the diagram above, CPU writes data to outbound window address
0x7000_0000, and the bus fabric maps it to 0x8000_0000. The ATU uses
bus address 0x8000_0000 as input address and maps to some PCI address
dynamically allocated by a PCI device driver on the host side.
The pcie-ep@5f010000 'reg[addr_space]' is the parent bus address, which is
the input of PCIe controller, including the ATU.
Set parent_bus_offset, the offset from the CPU address to the PCIe
controller input address using dw_pcie_init_parent_bus_offset(). The
parent_bus_offset is not used yet, so no functional change intended.
[bhelgaas: commit log]
Link: https://lore.kernel.org/r/20250315201548.858189-11-helgaas@kernel.org
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Consolidate devicetree resource handling in dw_pcie_ep_get_resources().
No functional change intended.
Link: https://lore.kernel.org/r/20250315201548.858189-10-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
|
|
Move devm_pci_epc_create() to the beginning of dw_pcie_ep_init().
devm_pci_epc_create() is generic code that doesn't depend on any DWC
resource, so moving it earlier keeps all the subsequent devicetree-related
code together.
Link: https://lore.kernel.org/r/20250315201548.858189-9-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
|
|
The 'ranges' property of a PCI controller's parent can indicate address
translation information. Most system use 1:1 map between CPU physical and
PCI controller input addresses.
But some hardware, like i.MX8QXP, doesn't use 1:1 map. See below diagram:
┌─────────┐ ┌────────────┐
┌─────┐ │ │ IA: 0x8ff8_0000 │ │
│ CPU ├───►│ ┌────►├─────────────────┐ │ PCI │
└─────┘ │ │ │ IA: 0x8ff0_0000 │ │ │
CPU Addr │ │ ┌─►├─────────────┐ │ │ Controller │
0x7ff8_0000─┼───┘ │ │ │ │ │ │
│ │ │ │ │ │ │ PCI Addr
0x7ff0_0000─┼──────┘ │ │ └──► IOSpace ─┼────────────►
│ │ │ │ │ 0
0x7000_0000─┼────────►├─────────┐ │ │ │
└─────────┘ │ └──────► CfgSpace ─┼────────────►
Bus Fabric │ │ │ 0
│ │ │
└──────────► MemSpace ─┼────────────►
IA: 0x8000_0000 │ │ 0x8000_0000
└────────────┘
bus@5f000000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x80000000 0x0 0x70000000 0x10000000>;
pcie@5f010000 {
compatible = "fsl,imx8q-pcie";
reg = <0x5f010000 0x10000>, <0x8ff00000 0x80000>;
reg-names = "dbi", "config";
...
};
};
Intermediate address (IA) here means the PCIe controller input address.
The pcie@5f010000 'reg[config]' address is the parent bus (PCIe controller
input) address of CfgSpace.
The ATU in MemSpace is not explicitly described via devicetree, so we
assume the offset from CPU address to intermediate MemSpace address is the
same as that for CfgSpace.
We could use bus@5f000000 'ranges' for the same purpose.
Set parent_bus_offset using dw_pcie_init_parent_bus_offset(). The
parent_bus_offset is not used yet, so no functional change intended.
Link: https://lore.kernel.org/r/20250315201548.858189-8-helgaas@kernel.org
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
dw_pcie_parent_bus_offset() looks up the parent bus address of a PCI
controller 'reg' property in devicetree. If implemented, .cpu_addr_fixup()
is a hard-coded way to get the parent bus address corresponding to a CPU
physical address.
Add debug code to compare the address from .cpu_addr_fixup() with the
address from devicetree. If they match, warn that .cpu_addr_fixup() is
redundant and should be removed; if they differ, warn that something is
wrong with the devicetree.
If .cpu_addr_fixup() is not implemented, the parent bus address should be
identical to the CPU physical address because we previously ignored the
parent bus address from devicetree. If the devicetree has a different
parent bus address, warn about it being broken.
[bhelgaas: split debug to separate patch for easier future revert, commit
log]
Link: https://lore.kernel.org/r/20250315201548.858189-7-helgaas@kernel.org
Signed-off-by: Frank Li <Frank.Li@nxp.com>
[bhelgaas: squash Ioana Ciornei <ioana.ciornei@nxp.com> fix for NULL
pointer deref when driver doesn't supply dw_pcie_ops, e.g., layerscape-pcie
https://lore.kernel.org/r/20250319134339.3114817-1-ioana.ciornei@nxp.com]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Return the offset from CPU physical address to the parent bus address of
the specified element of the devicetree 'reg' property.
[bhelgaas: cpu_phy_addr -> cpu_phys_addr, return offset, split
.cpu_addr_fixup() checking and debug to separate patch]
Link: https://lore.kernel.org/r/20250315201548.858189-6-helgaas@kernel.org
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
When BIOS neglects to assign bus numbers to PCI bridges, the kernel
attempts to correct that during PCI device enumeration. If it runs out
of bus numbers, no pci_bus is allocated and the "subordinate" pointer in
the bridge's pci_dev remains NULL.
The PCIe bandwidth controller erroneously does not check for a NULL
subordinate pointer and dereferences it on probe.
Bandwidth control of unusable devices below the bridge is of questionable
utility, so simply error out instead. This mirrors what PCIe hotplug does
since commit 62e4492c3063 ("PCI: Prevent NULL dereference during pciehp
probe").
The PCI core emits a message with KERN_INFO severity if it has run out of
bus numbers. PCIe hotplug emits an additional message with KERN_ERR
severity to inform the user that hotplug functionality is disabled at the
bridge. A similar message for bandwidth control does not seem merited,
given that its only purpose so far is to expose an up-to-date link speed
in sysfs and throttle the link speed on certain laptops with limited
Thermal Design Power. So error out silently.
User-visible messages:
pci 0000:16:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[...]
pci_bus 0000:45: busn_res: [bus 45-74] end is updated to 74
pci 0000:16:02.0: devices behind bridge are unusable because [bus 45-74] cannot be assigned for them
[...]
pcieport 0000:16:02.0: pciehp: Hotplug bridge without secondary bus, ignoring
[...]
BUG: kernel NULL pointer dereference
RIP: pcie_update_link_speed
pcie_bwnotif_enable
pcie_bwnotif_probe
pcie_port_probe_service
really_probe
Fixes: 665745f27487 ("PCI/bwctrl: Re-add BW notification portdrv as PCIe BW controller")
Reported-by: Wouter Bijlsma <wouter@wouterbijlsma.nl>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219906
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Tested-by: Wouter Bijlsma <wouter@wouterbijlsma.nl>
Cc: stable@vger.kernel.org # v6.13+
Link: https://lore.kernel.org/r/3b6c8d973aedc48860640a9d75d20528336f1f3c.1742669372.git.lukas@wunner.de
|
|
Update the CPM5 check to include CPM5_HOST1 variant. Previously, only
CPM5 was considered when mapping the "cpm_csr" register.
With this change, CPM5_HOST1 is also supported, ensuring proper
resource mapping for this variant.
Signed-off-by: Thippeswamy Havalige <thippeswamy.havalige@amd.com>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Link: https://lore.kernel.org/r/20250317124136.1317723-1-thippeswamy.havalige@amd.com
|
|
Don't populate the const read-only arrays "data" and "regs" on the
stack at run time, instead make them static.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
[kwilczynski: commit log, wrap overly long line to 80 columns]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Link: https://lore.kernel.org/r/20250317143456.477901-1-colin.i.king@gmail.com
|
|
Add support for AMD MDB (Multimedia DMA Bridge) IP core as Root Port.
The Versal2 devices include MDB Module. The integrated block for MDB
along with the integrated bridge can function as PCIe Root Port
controller at Gen5 32-GT/s operation per lane.
Bridge supports error and INTx interrupts and are handled using platform
specific interrupt line in Versal2.
Signed-off-by: Thippeswamy Havalige <thippeswamy.havalige@amd.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20250228093351.923615-4-thippeswamy.havalige@amd.com
[bhelgaas: only present on ARM64-based SoCs; squash Kconfig dependency on
ARM64 from Geert Uytterhoeven <geert+renesas@glider.be>:
https://lore.kernel.org/r/eaef1dea7edcf146aa377d5e5c5c85a76ff56bae.1742306383.git.geert+renesas@glider.be]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
[kwilczynski: commit log, code comments and error messages clean-up,
drop redundant "depends on PCI" from Kconfig, expose the error code
as part of error messages where appropriatie, change "depends on"
expression to match existing style from other drivers]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
|
|
PCIe devices (not CXL) can support DOE as well, so allow DOE to be enabled
even if CXL isn't.
Link: https://lore.kernel.org/r/20250306075211.1855177-4-alistair@alistair23.me
Signed-off-by: Alistair Francis <alistair@alistair23.me>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
PCIe r6.0 added support for Data Object Exchange (DOE). When DOE is
supported, the DOE Discovery Feature must be implemented per PCIe r6.1, sec
6.30.1.1. DOE allows a requester to obtain information about the other DOE
features supported by the device.
The kernel already queries the DOE features supported and caches the
values. Expose the values in sysfs to allow user space to determine which
DOE features are supported by the PCIe device.
By exposing the information to userspace, tools like lspci can relay the
information to users. By listing all of the supported features we can allow
userspace to parse the list, which might include vendor specific features
as well as yet to be supported features.
As the DOE Discovery feature must always be supported we treat it as a
special named attribute case. This allows the usual PCI attribute_group
handling to correctly create the doe_features directory when registering
pci_doe_sysfs_group (otherwise it doesn't and sysfs_add_file_to_group()
will seg fault).
After this patch is supported you can see something like this when
attaching a DOE device:
$ ls /sys/devices/pci0000:00/0000:00:02.0//doe*
0001:01 0001:02 doe_discovery
Link: https://lore.kernel.org/r/20250306075211.1855177-3-alistair@alistair23.me
Signed-off-by: Alistair Francis <alistair@alistair23.me>
[bhelgaas: drop pci_doe_sysfs_init() stub return, make
DEVICE_ATTR_RO(doe_discovery) static]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The ability to map PCI resources to user-space is controlled by global
defines. For vfio there is VFIO_PCI_MMAP which is only disabled on s390 and
controls mapping of PCI resources using vfio-pci with a fallback option via
the pread()/pwrite() interface.
For the PCI core there is ARCH_GENERIC_PCI_MMAP_RESOURCE which enables a
generic implementation for mapping PCI resources plus the newer sysfs
interface. Then there is HAVE_PCI_MMAP which can be used with custom
definitions of pci_mmap_resource_range() and the historical /proc/bus/pci
interface. Both mechanisms are all or nothing.
For s390 mapping PCI resources is possible and useful for testing and
certain applications such as QEMU's vfio-pci based user-space NVMe driver.
For certain devices, however access to PCI resources via mappings to
user-space is not possible and these must be excluded from the general PCI
resource mapping mechanisms.
Introduce pdev->non_mappable_bars to indicate that a PCI device's BARs can
not be accessed via mappings to user-space. In the future this enables
per-device restrictions of PCI resource mapping.
For now, set this flag for all PCI devices on s390 in line with the
existing, general disable of PCI resource mapping. As s390 is the only user
of the VFI_PCI_MMAP Kconfig options this can already be replaced with a
check of this new flag. Also add similar checks in the other code protected
by HAVE_PCI_MMAP respectively ARCH_GENERIC_PCI_MMAP in preparation for
enabling these for supported devices.
Link: https://lore.kernel.org/lkml/20250212132808.08dcf03c.alex.williamson@redhat.com/
Link: https://lore.kernel.org/r/20250226-vfio_pci_mmap-v7-2-c5c0f1d26efd@linux.ibm.com
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Clean up when virtfn setup fails to prevent NULL pointer dereference
during device removal. The kernel oops below occurred due to incorrect
error handling flow when pci_setup_device() fails.
Add pci_iov_scan_device(), which handles virtfn allocation and setup and
cleans up if pci_setup_device() fails, so pci_iov_add_virtfn() doesn't need
to call pci_stop_and_remove_bus_device(). This prevents accessing
partially initialized virtfn devices during removal.
BUG: kernel NULL pointer dereference, address: 00000000000000d0
RIP: 0010:device_del+0x3d/0x3d0
Call Trace:
pci_remove_bus_device+0x7c/0x100
pci_iov_add_virtfn+0xfa/0x200
sriov_enable+0x208/0x420
mlx5_core_sriov_configure+0x6a/0x160 [mlx5_core]
sriov_numvfs_store+0xae/0x1a0
Link: https://lore.kernel.org/r/20250310084524.599225-1-shayd@nvidia.com
Fixes: e3f30d563a38 ("PCI: Make pci_destroy_dev() concurrent safe")
Signed-off-by: Shay Drory <shayd@nvidia.com>
[bhelgaas: commit log, return ERR_PTR(-ENOMEM) directly]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Keith Busch <kbusch@kernel.org>
|
|
pcie_bwctrl_select_speed() should take __fls() of the speed bit, not return
it as a raw value. Instead of directly returning 2.5GT/s speed bit, simply
assign the fallback speed (2.5GT/s) into supported_speeds variable to share
the normal return path that calls pcie_supported_speeds2target_speed() to
calculate __fls().
This code path is not very likely to execute because
pcie_get_supported_speeds() should provide valid ->supported_speeds but a
spec violating device could fail to synthesize any speed in
pcie_get_supported_speeds(). It could also happen in case the
supported_speeds intersection is empty (also a violation of the current
PCIe specs).
Link: https://lore.kernel.org/r/20250321163103.5145-1-ilpo.jarvinen@linux.intel.com
Fixes: de9a6c8d5dbf ("PCI/bwctrl: Add pcie_set_target_speed() to set PCIe Link Speed")
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
PCIe hotplug can operate in poll mode without interrupt handlers using a
polling kthread only. eb34da60edee ("PCI: pciehp: Disable hotplug
interrupt during suspend") failed to consider that and enables HPIE
(Hot-Plug Interrupt Enable) unconditionally when resuming the Port.
Only set HPIE if non-poll mode is in use. This makes
pcie_enable_interrupt() match how pcie_enable_notification() already
handles HPIE.
Link: https://lore.kernel.org/r/20250321162114.3939-1-ilpo.jarvinen@linux.intel.com
Fixes: eb34da60edee ("PCI: pciehp: Disable hotplug interrupt during suspend")
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
|
|
Setting pci_msi_ignore_mask inhibits the toggling of the mask bit for both
MSI and MSI-X entries globally, regardless of the IRQ chip they are using.
Only Xen sets the pci_msi_ignore_mask when routing physical interrupts over
event channels, to prevent PCI code from attempting to toggle the maskbit,
as it's Xen that controls the bit.
However, the pci_msi_ignore_mask being global will affect devices that use
MSI interrupts but are not routing those interrupts over event channels
(not using the Xen pIRQ chip). One example is devices behind a VMD PCI
bridge. In that scenario the VMD bridge configures MSI(-X) using the
normal IRQ chip (the pIRQ one in the Xen case), and devices behind the
bridge configure the MSI entries using indexes into the VMD bridge MSI
table. The VMD bridge then demultiplexes such interrupts and delivers to
the destination device(s). Having pci_msi_ignore_mask set in that scenario
prevents (un)masking of MSI entries for devices behind the VMD bridge.
Move the signaling of no entry masking into the MSI domain flags, as that
allows setting it on a per-domain basis. Set it for the Xen MSI domain
that uses the pIRQ chip, while leaving it unset for the rest of the
cases.
Remove pci_msi_ignore_mask at once, since it was only used by Xen code, and
with Xen dropping usage the variable is unneeded.
This fixes using devices behind a VMD bridge on Xen PV hardware domains.
Albeit Devices behind a VMD bridge are not known to Xen, that doesn't mean
Linux cannot use them. By inhibiting the usage of
VMD_FEAT_CAN_BYPASS_MSI_REMAP and the removal of the pci_msi_ignore_mask
bodge devices behind a VMD bridge do work fine when use from a Linux Xen
hardware domain. That's the whole point of the series.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Juergen Gross <jgross@suse.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Message-ID: <20250219092059.90850-4-roger.pau@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
MSI remapping bypass (directly configuring MSI entries for devices on the
VMD bus) won't work under Xen, as Xen is not aware of devices in such bus,
and hence cannot configure the entries using the pIRQ interface in the PV
case, and in the PVH case traps won't be setup for MSI entries for such
devices.
Until Xen is aware of devices in the VMD bus prevent the
VMD_FEAT_CAN_BYPASS_MSI_REMAP capability from being used when running as
any kind of Xen guest.
The MSI remapping bypass is an optional feature of VMD bridges, and hence
when running under Xen it will be masked and devices will be forced to
redirect its interrupts from the VMD bridge. That mode of operation must
always be supported by VMD bridges and works when Xen is not aware of
devices behind the VMD bridge.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Message-ID: <20250219092059.90850-3-roger.pau@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
For some reason, cardbus related io/mem size declarations are in
linux/pci.h, whereas non-cardbus sizes are already in pci/pci.h.
Move all them into one place in pci/pci.h.
Link: https://lore.kernel.org/r/20250311174701.3586-4-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
pci_setup_bridge() is only used within setup-bus.c. Therefore, make it a
static function.
Link: https://lore.kernel.org/r/20250311174701.3586-3-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Neither pci_reassign_bridge_resources() nor pci_reassign_resource() is used
outside of the PCI subsystem. They seem to be naturally static functions
but since resource fitting/assignment is split between setup-bus.c and
setup-res.c, they fall into different sides of the divide and need to be
declared.
Move the declarations of pci_reassign_bridge_resources() and
pci_reassign_resource() into pci/pci.h to keep them internal to PCI
subsystem.
Link: https://lore.kernel.org/r/20250311174701.3586-2-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
pci_rescan_bus_bridge_resize() is only used by code inside PCI subsystem.
The comment also falsely advertises it to be for hotplug drivers, yet the
only caller is from sysfs store function. Move the function declaration
into pci/pci.h.
Link: https://lore.kernel.org/r/20250311174701.3586-1-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
__resource_resize_store() attempts to release all resources of the device
before attempting the resize. The loop, however, only covers standard BARs
(< PCI_STD_NUM_BARS). If a device has VF BARs that are assigned,
pci_reassign_bridge_resources() finds the bridge window still has some
assigned child resources and returns -NOENT which makes
pci_resize_resource() to detect an error and abort the resize.
Change the release loop to cover all resources up to VF BARs which allows
the resize operation to release the bridge windows and attempt to assigned
them again with the different size.
If SR-IOV is enabled, disallow resize as it requires releasing also IOV
resources.
Link: https://lore.kernel.org/r/20250320142837.8027-1-ilpo.jarvinen@linux.intel.com
Fixes: 91fa127794ac ("PCI: Expose PCIe Resizable BAR support via sysfs")
Reported-by: Michał Winiarski <michal.winiarski@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Currently, pci_bridge_d3_possible() encodes a variety of decision factors
when deciding whether a given bridge can be put into D3. A particular one
of note is for "recent enough PCIe ports." Per Rafael [0]:
"There were hardware issues related to PM on x86 platforms predating
the introduction of Connected Standby in Windows. For instance,
programming a port into D3hot by writing to its PMCSR might cause the
PCIe link behind it to go down and the only way to revive it was to
power cycle the Root Complex. And similar."
Thus, this function contains a DMI-based check for post-2015 BIOS.
The above factors (Windows, x86) don't really apply to non-x86 systems, and
also, many such systems don't have BIOS or DMI. However, we'd like to be
able to suspend bridges on non-x86 systems too.
Restrict the "recent enough" check to x86. If we find further
incompatibilities, it probably makes sense to expand on the deny-list
approach (i.e., bridge_d3_blacklist or similar).
Link: https://lore.kernel.org/r/20250320110604.v6.1.Id0a0e78ab0421b6bce51c4b0b87e6aebdfc69ec7@changeid
Link: https://lore.kernel.org/linux-pci/CAJZ5v0j_6jeMAQ7eFkZBe5Yi+USGzysxAgfemYh=-zq4h5W+Qg@mail.gmail.com/ [0]
Link: https://lore.kernel.org/linux-pci/20240227225442.GA249898@bhelgaas/ [1]
Link: https://lore.kernel.org/linux-pci/20240828210705.GA37859@bhelgaas/ [2]
[Brian: rewrite to !X86 based on Rafael's suggestions]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
The access to the PCI config space via pci_ops::read and pci_ops::write is
a low-level hardware access. The functions can be accessed with disabled
interrupts even on PREEMPT_RT. The pci_lock is a raw_spinlock_t for this
purpose.
A spinlock_t becomes a sleeping lock on PREEMPT_RT, so it cannot be
acquired with disabled interrupts. The vmd_dev::cfg_lock is accessed in
the same context as the pci_lock.
Make vmd_dev::cfg_lock a raw_spinlock_t type so it can be used with
interrupts disabled.
This was reported as:
BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48
Call Trace:
rt_spin_lock+0x4e/0x130
vmd_pci_read+0x8d/0x100 [vmd]
pci_user_read_config_byte+0x6f/0xe0
pci_read_config+0xfe/0x290
sysfs_kf_bin_read+0x68/0x90
Signed-off-by: Ryo Takakura <ryotkkr98@gmail.com>
Tested-by: Luis Claudio R. Goncalves <lgoncalv@redhat.com>
Acked-by: Luis Claudio R. Goncalves <lgoncalv@redhat.com>
[bigeasy: reword commit message]
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Tested-off-by: Luis Claudio R. Goncalves <lgoncalv@redhat.com>
Link: https://lore.kernel.org/r/20250218080830.ufw3IgyX@linutronix.de
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
[bhelgaas: add back report info from
https://lore.kernel.org/lkml/20241218115951.83062-1-ryotkkr98@gmail.com/]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Zone device pages are used to represent various type of device memory
managed by device drivers. Currently compound zone device pages are not
supported. This is because MEMORY_DEVICE_FS_DAX pages are the only user
of higher order zone device pages and have their own page reference
counting.
A future change will unify FS DAX reference counting with normal page
reference counting rules and remove the special FS DAX reference counting.
Supporting that requires compound zone device pages.
Supporting compound zone device pages requires compound_head() to
distinguish between head and tail pages whilst still preserving the
special struct page fields that are specific to zone device pages.
A tail page is distinguished by having bit zero being set in
page->compound_head, with the remaining bits pointing to the head page.
For zone device pages page->compound_head is shared with page->pgmap.
The page->pgmap field must be common to all pages within a folio, even if
the folio spans memory sections. Therefore pgmap is the same for both
head and tail pages and can be moved into the folio and we can use the
standard scheme to find compound_head from a tail page.
Link: https://lkml.kernel.org/r/67055d772e6102accf85161d0b57b0b3944292bf.1740713401.git-series.apopple@nvidia.com
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Signed-off-by: Balbir Singh <balbirs@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: David Hildenbrand <david@redhat.com>
Tested-by: Alison Schofield <alison.schofield@intel.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Asahi Lina <lina@asahilina.net>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Chunyan Zhang <zhang.lyra@gmail.com>
Cc: "Darrick J. Wong" <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: linmiaohe <linmiaohe@huawei.com>
Cc: Logan Gunthorpe <logang@deltatee.com>
Cc: Matthew Wilcow (Oracle) <willy@infradead.org>
Cc: Michael "Camp Drill Sergeant" Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Ted Ts'o <tytso@mit.edu>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: WANG Xuerui <kernel@xen0n.name>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Currently ZONE_DEVICE page reference counts are initialised by core memory
management code in __init_zone_device_page() as part of the memremap()
call which driver modules make to obtain ZONE_DEVICE pages. This
initialises page refcounts to 1 before returning them to the driver.
This was presumably done because it drivers had a reference of sorts on
the page. It also ensured the page could always be mapped with
vm_insert_page() for example and would never get freed (ie. have a zero
refcount), freeing drivers of manipulating page reference counts.
However it complicates figuring out whether or not a page is free from the
mm perspective because it is no longer possible to just look at the
refcount. Instead the page type must be known and if GUP is used a
secondary pgmap reference is also sometimes needed.
To simplify this it is desirable to remove the page reference count for
the driver, so core mm can just use the refcount without having to account
for page type or do other types of tracking. This is possible because
drivers can always assume the page is valid as core kernel will never
offline or remove the struct page.
This means it is now up to drivers to initialise the page refcount as
required. P2PDMA uses vm_insert_page() to map the page, and that requires
a non-zero reference count when initialising the page so set that when the
page is first mapped.
Link: https://lkml.kernel.org/r/6aedb0ac2886dcc4503cb705273db5b3863a0b66.1740713401.git-series.apopple@nvidia.com
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: David Hildenbrand <david@redhat.com>
Tested-by: Alison Schofield <alison.schofield@intel.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Asahi Lina <lina@asahilina.net>
Cc: Balbir Singh <balbirs@nvidia.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Chunyan Zhang <zhang.lyra@gmail.com>
Cc: "Darrick J. Wong" <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: linmiaohe <linmiaohe@huawei.com>
Cc: Logan Gunthorpe <logang@deltatee.com>
Cc: Matthew Wilcow (Oracle) <willy@infradead.org>
Cc: Michael "Camp Drill Sergeant" Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Ted Ts'o <tytso@mit.edu>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: WANG Xuerui <kernel@xen0n.name>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Consolidate devicetree resource handling in dw_pcie_host_get_resources().
No functional change intended.
Link: https://lore.kernel.org/r/20250315201548.858189-5-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
|
|
Move devm_pci_alloc_host_bridge() to the beginning of dw_pcie_host_init().
devm_pci_alloc_host_bridge() is generic code that doesn't depend on any DWC
resource, so moving it earlier keeps all the subsequent devicetree-related
code together.
[bhelgaas: reorder earlier in series]
Link: https://lore.kernel.org/r/20250315201548.858189-4-helgaas@kernel.org
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Rename 'cpu_addr' to 'parent_bus_addr' in the DesignWare ATU configuration.
The ATU translates parent bus addresses to PCI addresses, which are often
the same as CPU addresses but can differ in systems where the bus fabric
translates addresses before passing them to the PCIe controller. This
renaming clarifies the purpose and avoids confusion.
Link: https://lore.kernel.org/r/20250315201548.858189-3-helgaas@kernel.org
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
