| Age | Commit message (Collapse) | Author |
|---|
|
Without explicitly setting a parent for the watchdog device, the device is
registered with a NULL parent. This causes device_add() (called internally
by devm_watchdog_register_device()) to register the device under
/sys/devices/virtual, since no parent is provided. The result is:
DEVPATH=/devices/virtual/watchdog/watchdog0
To fix this, assign &pdev->dev as the parent of the watchdog device before
calling devm_watchdog_register_device(). This ensures the device is
associated with the Portwell EC platform device and placed correctly in
sysfs as:
DEVPATH=/devices/platform/portwell-ec/watchdog/watchdog0
This aligns the device hierarchy with expectations and avoids misplacement
under the virtual class.
Fixes: 835796753310 ("platform/x86: portwell-ec: Add GPIO and WDT driver for Portwell EC")
Signed-off-by: Ivan Hu <ivan.hu@canonical.com>
Link: https://lore.kernel.org/r/20250616074819.63547-1-ivan.hu@canonical.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The normal bin_attrs field can now handle const pointers.
This makes the _new variant unnecessary.
Switch all users back.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20250530-sysfs-const-bin_attr-final-v3-4-724bfcf05b99@weissschuh.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The bin_attribute argument of bin_attribute::read() is now const.
This makes the _new() callbacks unnecessary. Switch all users back.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20250530-sysfs-const-bin_attr-final-v3-3-724bfcf05b99@weissschuh.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
m16 R1"
This reverts commit 5ff79cabb23a2f14d2ed29e9596aec908905a0e6.
Although the Alienware m16 R1 AMD model supports G-Mode, it actually has
a lower power ceiling than plain "performance" profile, which results in
lower performance.
Reported-by: Cihan Ozakca <cozakca@outlook.com>
Cc: stable@vger.kernel.org # 6.15.x
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250611-m16-rev-v1-1-72d13bad03c9@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Every other s2idle cycle fails to reach hardware sleep when keyboard
wakeup is enabled. This appears to be an EC bug, but the vendor
refuses to fix it.
It was confirmed that turning off i8042 wakeup avoids ths issue
(albeit keyboard wakeup is disabled). Take the lesser of two evils
and add it to the i8042 quirk list.
Reported-by: Raoul <ein4rth@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220116
Tested-by: Raoul <ein4rth@gmail.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20250611203341.3733478-1-superm1@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
When multiple WMI devices with the same GUID are present
inside a given system, the WMI driver core might fail to
register all of them.
Consider the following scenario:
WMI devices (<GUID>[-<ID>]):
05901221-D566-11D1-B2F0-00A0C9062910 (on PNP0C14:00)
05901221-D566-11D1-B2F0-00A0C9062910-1 (on PNP0C14:01)
If the WMI core driver somehow unbinds from PNP0C14:00, the following
will happen upon rebinding:
1. The WMI driver core counts all registered WMI devices with a GUID
of 05901221-D566-11D1-B2F0-00A0C9062910 (count: 1).
2. The new WMI device will be named
"05901221-D566-11D1-B2F0-00A0C9062910-1" because another device
with the same GUID is already registered (on PNP0C14:01).
3. The new WMI device cannot be registered due to a name conflict.
Use a IDA when building the WMI device name to avoid such name
collisions by ensuring that a given WMI device ID is not reused.
Userspace applications using udev for WMI device detection are not
impacted by this change. Additionally userspace applications that do
fully support the existing naming scheme are also not impacted. Only
userspace applications using hardcoded sysfs paths will break.
Introduce a kconfig option for restoring the old naming scheme to
give developers time to fix any compatibility issues.
Tested on a Asus Prime B650-Plus.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20250610055526.23688-2-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The auxiliary device creation of this driver is simple enough to
use the available auxiliary device creation helper.
Use it and remove some boilerplate code.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20250610-yoga-aux-v1-1-d6115aa1683c@baylibre.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Follow the sysfs ABI documentation that drivers should round written
values to the nearest supported value instead of returning an error.
Tested on a Fujitsu Lifebook U7720.
Signed-off-by: Jelle van der Waa <jvanderwaa@redhat.com>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Acked-by: Jonathan Woithe <jwoithe@just42.net>
Link: https://lore.kernel.org/r/20250609102115.36936-3-jvanderwaa@redhat.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The charge control threshold value ranges from 0-100.
Signed-off-by: Jelle van der Waa <jvanderwaa@redhat.com>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Acked-by: Jonathan Woithe <jwoithe@just42.net>
Link: https://lore.kernel.org/r/20250609102115.36936-2-jvanderwaa@redhat.com
[ij: use reverse xmas-tree order]
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
As of commit 92ac7de3175e3 ("gpiolib: don't allow setting values on input
lines"), the GPIO core makes sure values cannot be set on input lines.
Remove the unnecessary check.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20250612074835.13800-1-brgl@bgdev.pl
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
devm_pinctrl_register_mappings()
Use devm_pinctrl_register_mappings(), so the core automatically unregisters
the pinctrl mappings. It makes the code easier to read.
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Link: https://lore.kernel.org/r/20250609-lenovo-yoga-tab2-pro-1380-fastcharger-devm-pinctrl-register-mappings-v1-1-fb601f2b80f6@bootlin.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
When KCOV is enabled all functions get instrumented, unless the
__no_sanitize_coverage attribute is used. To prepare for
__no_sanitize_coverage being applied to __init functions[1], we have
to handle differences in how GCC's inline optimizations get resolved.
For thinkpad_acpi routines, this means forcing two functions to be
inline with __always_inline.
Link: https://lore.kernel.org/lkml/20250523043935.2009972-11-kees@kernel.org/ [1]
Signed-off-by: Kees Cook <kees@kernel.org>
Link: https://lore.kernel.org/r/20250529181831.work.439-kees@kernel.org
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Using a string variable in place of a format string causes a W=1 build warning:
drivers/platform/x86/intel/uncore-frequency/uncore-frequency-common.c:61:40: error: format string is not a string literal (potentially insecure) [-Werror,-Wformat-security]
61 | length += sysfs_emit_at(buf, length, agent_name[agent]);
| ^~~~~~~~~~~~~~~~~
Use the safer "%s" format string to print it instead.
Fixes: b98fa870fce2 ("platform/x86/intel-uncore-freq: Add attributes to show agent types")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20250610093459.2646337-1-arnd@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Add Panther Lake support to Intel PMC SSRAM Telemetry driver.
Signed-off-by: Xi Pardee <xi.pardee@linux.intel.com>
Link: https://lore.kernel.org/r/20250610230416.622970-2-xi.pardee@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Add Lunar Lake support to Intel PMC SSRAM Telemetry driver.
Signed-off-by: Xi Pardee <xi.pardee@linux.intel.com>
Link: https://lore.kernel.org/r/20250610230416.622970-1-xi.pardee@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Some Ideapad models support a battery conservation mode which limits the
battery charge threshold for longer battery longevity. This is currently
exposed via a custom conservation_mode attribute in sysfs.
The newly introduced charge_types sysfs attribute is a standardized
replacement for laptops with a fixed end charge threshold. Setting it to
`Long Life` would enable battery conservation mode. The standardized
user space API would allow applications such as UPower to detect laptops
which support this battery longevity mode and set it.
Tested on an Lenovo ideapad U330p.
Signed-off-by: Jelle van der Waa <jvanderwaa@redhat.com>
Suggested-By: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20250514201054.381320-1-jvanderwaa@redhat.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Create lenovo subdirectory for holding Lenovo specific drivers.
Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250610192830.1731454-2-mpearson-lenovo@squebb.ca
[ij: put depends on DMI back, fix trailing empty lines.]
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Fix issues reported by kernel test robot.
- Require DMI for think-lmi.
- Check return from getting serial string
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202506062319.F0IpDxF6-lkp@intel.com/
Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250610192830.1731454-1-mpearson-lenovo@squebb.ca
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
telemetry_raw_read_events() was added by the commit 378f956e3f93
("platform/x86: Add Intel Telemetry Core Driver") in 2016 but has
remained unused.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://lore.kernel.org/r/20250608012512.377134-4-linux@treblig.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The functions:
- telemetry_get_sampling_period()
- telemetry_set_sampling_period()
were both added by the commit 378f956e3f93 ("platform/x86: Add Intel
Telemetry Core Driver") in 2016 but have remained unused.
They're each a tiny wrapper that is the only caller through a similarly
named function pointer, and for each function pointer there's a 'def'
empty implementation and a plt implementation.
Remove all of those components for each function.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://lore.kernel.org/r/20250608012512.377134-3-linux@treblig.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The functions:
- telemetry_add_events()
- telemetry_update_events()
- telemetry_reset_events()
- telemetry_get_eventconfig()
were all added by the commit 378f956e3f93 ("platform/x86: Add Intel
Telemetry Core Driver") in 2016 but have remained unused.
They're each a tiny wrapper that is the only caller through a similarly
named function pointer, and for each function pointer there's a 'def'
empty implementation and a plt implementation.
Remove all of those components for each function.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://lore.kernel.org/r/20250608012512.377134-2-linux@treblig.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
If cros_typec_probe is called before EC device is registered,
cros_typec_probe will fail. It may happen when cros-ec-typec.ko is
loaded before EC bus layer module (e.g. cros_ec_lpcs.ko,
cros_ec_spi.ko).
Return -EPROBE_DEFER when cros_typec_probe doesn't get EC device, so
the probe function can be called again after EC device is registered.
Signed-off-by: Tomasz Michalec <tmichalec@google.com>
Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Link: https://lore.kernel.org/r/20250610153748.1858519-1-tmichalec@google.com
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
|
|
Bump the module version.
Signed-off-by: Stuart Hayes <stuart.w.hayes@gmail.com>
Link: https://lore.kernel.org/r/20250609184659.7210-6-stuart.w.hayes@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The dell_rbu driver will use memset() to clear the data held by each
packet when it is no longer needed (when the driver is unloaded, the
packet size is changed, etc).
The amount of memory that is cleared (before this patch) is the normal
packet size. However, the last packet in the list may be smaller.
Fix this to only clear the memory actually used by each packet, to prevent
it from writing past the end of data buffer.
Because the packet data buffers are allocated with __get_free_pages() (in
page-sized increments), this bug could only result in a buffer being
overwritten when a packet size larger than one page is used. The only user
of the dell_rbu module should be the Dell BIOS update program, which uses
a packet size of 4096, so no issues should be seen without the patch, it
just blocks the possiblity.
Fixes: 6c54c28e69f2 ("[PATCH] dell_rbu: new Dell BIOS update driver")
Signed-off-by: Stuart Hayes <stuart.w.hayes@gmail.com>
Link: https://lore.kernel.org/r/20250609184659.7210-5-stuart.w.hayes@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Pass the correct list head to list_for_each_entry*() when looping through
the packet list.
Without this patch, reading the packet data via sysfs will show the data
incorrectly (because it starts at the wrong packet), and clearing the
packet list will result in a NULL pointer dereference.
Fixes: d19f359fbdc6 ("platform/x86: dell_rbu: don't open code list_for_each_entry*()")
Signed-off-by: Stuart Hayes <stuart.w.hayes@gmail.com>
Link: https://lore.kernel.org/r/20250609184659.7210-3-stuart.w.hayes@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Fix a sparse lock context warning.
Signed-off-by: Stuart Hayes <stuart.w.hayes@gmail.com>
Link: https://lore.kernel.org/r/20250609184659.7210-2-stuart.w.hayes@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
commit 5b1122fc4995f ("platform/x86/amd/pmf: fix cleanup in
amd_pmf_init_smart_pc()") adjusted the error handling flow to use a ladder
but this isn't actually needed because work is only scheduled in
amd_pmf_start_policy_engine() and with device managed cleanups pointers
for allocations don't need to be freed.
Adjust the error flow to a single call to amd_pmf_deinit_smart_pc() for
the cases that need to clean up.
Cc: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/20250512211154.2510397-4-superm1@kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20250522003457.1516679-4-superm1@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
If any of the tee init fails, pass up the errors and clear the tee_ctx
pointer. This will prevent cleaning up multiple times.
Fixes: ac052d8c08f9d ("platform/x86/amd/pmf: Add PMF TEE interface")
Suggested-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/20250512211154.2510397-3-superm1@kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20250522003457.1516679-3-superm1@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
If setting up smart PC fails for any reason then this can lead to
a double free when unloading amd-pmf. This is because dev->buf was
freed but never set to NULL and is again freed in amd_pmf_remove().
To avoid subtle allocation bugs in failures leading to a double free
change all allocations into device managed allocations.
Fixes: 5b1122fc4995f ("platform/x86/amd/pmf: fix cleanup in amd_pmf_init_smart_pc()")
Link: https://lore.kernel.org/r/20250512211154.2510397-2-superm1@kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20250522003457.1516679-2-superm1@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
IS_REACHABLE() was required when CONFIG_HWMON was set to m and HSMP to y.
However, commit 69157b00b526 ("platform/x86/amd/hsmp: fix building with
CONFIG_HWMON=m") added a HWMON dependency for HSMP in Kconfig. With
this change, using IS_ENABLED() is sufficient.
Add the missing header file as well.
Signed-off-by: Suma Hegde <suma.hegde@amd.com>
Link: https://lore.kernel.org/r/20250603055807.2503028-1-suma.hegde@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Add known fan type IDs and match them to an appropriate label in
awcc_hwmon_read_string().
Additionally, add the AWCC_TEMP_SENSOR_FRONT type, which was inferred
from it's related fan type in supported systems.
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20250528-awcc-labels-v1-1-6aa39d8e4c3d@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Currently hsmp_send_message() uses down_timeout() with a 100ms timeout
to take the semaphore. However __hsmp_send_message(), the content of the
critical section, has a sleep in it. On systems with significantly
delayed scheduling behaviour this may take over 100ms.
Convert this method to down_interruptible(). Leave the error handling
the same as the documentation currently is not specific about what error
is returned.
Previous behaviour: a caller who competes with another caller stuck in
the critical section due to scheduler delays would receive -ETIME.
New behaviour: a caller who competes with another caller stuck in the
critical section due to scheduler delays will complete successfully.
Reviewed-by: Suma Hegde <suma.hegde@amd.com>
Tested-by: Suma Hegde <suma.hegde@amd.com>
Signed-off-by: Jake Hillion <jake@hillion.co.uk>
Link: https://lore.kernel.org/r/20250605-amd-hsmp-v2-2-a811bc3dd74a@hillion.co.uk
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
__hsmp_send_message sleeps between result read attempts and has a
timeout of 100ms. Under extreme load it's possible for these sleeps to
take a long time, exceeding the 100ms. In this case the current code
does not check the register and fails with ETIMEDOUT.
Refactor the loop to ensure there is at least one read of the register
after a sleep of any duration. This removes instances of ETIMEDOUT with
a single caller, even with a misbehaving scheduler. Tested on AMD
Bergamo machines.
Suggested-by: Blaise Sanouillet <linux@blaise.sanouillet.com>
Reviewed-by: Suma Hegde <suma.hegde@amd.com>
Tested-by: Suma Hegde <suma.hegde@amd.com>
Signed-off-by: Jake Hillion <jake@hillion.co.uk>
Link: https://lore.kernel.org/r/20250605-amd-hsmp-v2-1-a811bc3dd74a@hillion.co.uk
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The area of memory that contains the metrics table may contain garbage
when the cycle starts. This normally doesn't matter because the cycle
itself will populate it with valid data, however commit 9f5595d5f03fd
("platform/x86/amd: pmc: Require at least 2.5 seconds between HW sleep
cycles") started to use it during the check() phase. Depending upon
what garbage is in the table it's possible that the system will wait
2.5 seconds for even the first cycle, which will be visible to a user.
To prevent this from happening explicitly clear the table when logging
is started.
Fixes: 9f5595d5f03fd ("platform/x86/amd: pmc: Require at least 2.5 seconds between HW sleep cycles")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20250603132412.3555302-1-superm1@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Return -ENOMEM instead of success if kcalloc() fails.
Fixes: e37be5d85c60 ("platform/x86/intel: power-domains: Add interface to get Linux die ID")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/aEKvIGCt6d8Gcx4S@stanley.mountain
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Add device ID SAM0426 (Notebook 9 Pro and similar devices) as reported
and tested by GitHub user "diego-karsa" [1].
[1]: https://github.com/joshuagrisham/samsung-galaxybook-extras/issues/69
Signed-off-by: Joshua Grisham <josh@joshuagrisham.com>
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20250606130909.207047-1-josh@joshuagrisham.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Address a Smatch static checker warning regarding an unchecked
dereference in the function call:
set_cdie_id(i, cluster_info, plat_info)
when plat_info is NULL.
Instead of addressing this one case, in general if plat_info is NULL
then it can cause other issues. For example in a two package system it
will give warning for duplicate sysfs entry as package ID will be always
zero for both packages when creating string for attribute group name.
plat_info is derived from TPMI ID TPMI_BUS_INFO, which is integral to
the core TPMI design. Therefore, it should not be NULL on a production
platform. Consequently, the module should fail to load if plat_info is
NULL.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/platform-driver-x86/aEKvGCLd1qmX04Tc@stanley.mountain/T/#u
Fixes: 8a54e2253e4c ("platform/x86/intel-uncore-freq: Uncore frequency control via TPMI")
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250606205300.2384494-1-srinivas.pandruvada@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
It was reported that ideapad-laptop sometimes causes some recent (since
2024) Lenovo ThinkBook models shut down when:
- suspending/resuming
- closing/opening the lid
- (dis)connecting a charger
- reading/writing some sysfs properties, e.g., fan_mode, touchpad
- pressing down some Fn keys, e.g., Brightness Up/Down (Fn+F5/F6)
- (seldom) loading the kmod
The issue has existed since the launch day of such models, and there
have been some out-of-tree workarounds (see Link:) for the issue. One
disables some functionalities, while another one simply shortens
IDEAPAD_EC_TIMEOUT. The disabled functionalities have read_ec_data() in
their call chains, which calls schedule() between each poll.
It turns out that these models suffer from the indeterminacy of
schedule() because of their low tolerance for being polled too
frequently. Sometimes schedule() returns too soon due to the lack of
ready tasks, causing the margin between two polls to be too short.
In this case, the command is somehow aborted, and too many subsequent
polls (they poll for "nothing!") may eventually break the state machine
in the EC, resulting in a hard shutdown. This explains why shortening
IDEAPAD_EC_TIMEOUT works around the issue - it reduces the total number
of polls sent to the EC.
Even when it doesn't lead to a shutdown, frequent polls may also disturb
the ongoing operation and notably delay (+ 10-20ms) the availability of
EC response. This phenomenon is unlikely to be exclusive to the models
mentioned above, so dropping the schedule() manner should also slightly
improve the responsiveness of various models.
Fix these issues by migrating to usleep_range(150, 300). The interval is
chosen to add some margin to the minimal 50us and considering EC
responses are usually available after 150-2500us based on my test. It
should be enough to fix these issues on all models subject to the EC bug
without introducing latency on other models.
Tested on ThinkBook 14 G7+ ASP and solved both issues. No regression was
introduced in the test on a model without the EC bug (ThinkBook X IMH,
thanks Eric).
Link: https://github.com/ty2/ideapad-laptop-tb2024g6plus/commit/6c5db18c9e8109873c2c90a7d2d7f552148f7ad4
Link: https://github.com/ferstar/ideapad-laptop-tb/commit/42d1e68e5009529d31bd23f978f636f79c023e80
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218771
Fixes: 6a09f21dd1e2 ("ideapad: add ACPI helpers")
Cc: stable@vger.kernel.org
Tested-by: Felix Yan <felixonmars@archlinux.org>
Tested-by: Eric Long <i@hack3r.moe>
Tested-by: Jianfei Zhang <zhangjianfei3@gmail.com>
Tested-by: Mingcong Bai <jeffbai@aosc.io>
Tested-by: Minh Le <minhld139@gmail.com>
Tested-by: Sicheng Zhu <Emmet_Z@outlook.com>
Signed-off-by: Rong Zhang <i@rong.moe>
Link: https://lore.kernel.org/r/20250525201833.37939-1-i@rong.moe
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Move this API to the canonical timer_*() namespace.
[ tglx: Redone against pre rc1 ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/aB2X0jCKQO56WdMt@gmail.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch updates from Huacai Chen:
- Adjust the 'make install' operation
- Support SCHED_MC (Multi-core scheduler)
- Enable ARCH_SUPPORTS_MSEAL_SYSTEM_MAPPINGS
- Enable HAVE_ARCH_STACKLEAK
- Increase max supported CPUs up to 2048
- Introduce the numa_memblks conversion
- Add PWM controller nodes in dts
- Some bug fixes and other small changes
* tag 'loongarch-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
platform/loongarch: laptop: Unregister generic_sub_drivers on exit
platform/loongarch: laptop: Add backlight power control support
platform/loongarch: laptop: Get brightness setting from EC on probe
LoongArch: dts: Add PWM support to Loongson-2K2000
LoongArch: dts: Add PWM support to Loongson-2K1000
LoongArch: dts: Add PWM support to Loongson-2K0500
LoongArch: vDSO: Correctly use asm parameters in syscall wrappers
LoongArch: Fix panic caused by NULL-PMD in huge_pte_offset()
LoongArch: Preserve firmware configuration when desired
LoongArch: Avoid using $r0/$r1 as "mask" for csrxchg
LoongArch: Introduce the numa_memblks conversion
LoongArch: Increase max supported CPUs up to 2048
LoongArch: Enable HAVE_ARCH_STACKLEAK
LoongArch: Enable ARCH_SUPPORTS_MSEAL_SYSTEM_MAPPINGS
LoongArch: Add SCHED_MC (Multi-core scheduler) support
LoongArch: Add some annotations in archhelp
LoongArch: Using generic scripts/install.sh in `make install`
LoongArch: Add a default install.sh
|
|
Without correct unregisteration, ACPI notify handlers and the platform
drivers installed by generic_subdriver_init() will become dangling
references after removing the loongson_laptop module, triggering various
kernel faults when a hotkey is sent or at kernel shutdown.
Cc: stable@vger.kernel.org
Fixes: 6246ed09111f ("LoongArch: Add ACPI-based generic laptop driver")
Signed-off-by: Yao Zi <ziyao@disroot.org>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
loongson_laptop_turn_{on,off}_backlight() are designed for controlling
the power of the backlight, but they aren't really used in the driver
previously.
Unify these two functions since they only differ in arguments passed to
ACPI method, and wire up loongson_laptop_backlight_update() to update
the power state of the backlight as well. Tested on the TongFang L860-T2
Loongson-3A5000 laptop.
Cc: stable@vger.kernel.org
Fixes: 6246ed09111f ("LoongArch: Add ACPI-based generic laptop driver")
Signed-off-by: Yao Zi <ziyao@disroot.org>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Previously during driver probe, 1 is unconditionally taken as current
brightness value and set to props.brightness, which will be considered
as the brightness before suspend and restored to EC on resume. Since a
brightness value of 1 almost never matches EC's state on coldboot (my
laptop's EC defaults to 80), this causes surprising changes of screen
brightness on the first time of resume after coldboot.
Let's get brightness from EC and take it as the current brightness on
probe of the laptop driver to avoid the surprising behavior. Tested on
TongFang L860-T2 Loongson-3A5000 laptop.
Cc: stable@vger.kernel.org
Fixes: 6246ed09111f ("LoongArch: Add ACPI-based generic laptop driver")
Signed-off-by: Yao Zi <ziyao@disroot.org>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"Updates are across the usual driver subsystems with SoC specific
drivers:
- added soc specicific drivers for sophgo cv1800 and sg2044, qualcomm
sm8750, and amlogic c3 and s4 chips.
- cache controller updates for sifive chips, plus binding changes for
other cache descriptions.
- memory controller drivers for mediatek mt6893, stm32 and cleanups
for a few more drivers
- reset controller drivers for T-Head TH1502, Sophgo sg2044 and
Renesas RZ/V2H(P)
- SCMI firmware updates to better deal with buggy firmware, plus
better support for Qualcomm X1E and NXP i.MX specific interfaces
- a new platform driver for the crypto firmware on Cznic Turris
Omnia/MOX
- cleanups for the TEE firmware subsystem and amdtee driver
- minor updates and fixes for freescale/nxp, qualcomm, google,
aspeed, wondermedia, ti, nxp, renesas, hisilicon, mediatek,
broadcom and samsung SoCs"
* tag 'soc-drivers-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (133 commits)
soc: aspeed: Add NULL check in aspeed_lpc_enable_snoop()
soc: aspeed: lpc: Fix impossible judgment condition
ARM: aspeed: Don't select SRAM
docs: firmware: qcom_scm: Fix kernel-doc warning
soc: fsl: qe: Consolidate chained IRQ handler install/remove
firmware: qcom: scm: Allow QSEECOM for HP EliteBook Ultra G1q
dt-bindings: mfd: qcom,tcsr: Add compatible for ipq5018
dt-bindings: cache: add QiLai compatible to ax45mp
memory: stm32_omm: Fix error handling in stm32_omm_disable_child()
dt-bindings: cache: Convert marvell,tauros2-cache to DT schema
dt-bindings: cache: Convert marvell,{feroceon,kirkwood}-cache to DT schema
soc: samsung: exynos-pmu: enable CPU hotplug support for gs101
MAINTAINERS: Add google,gs101-pmu-intr-gen.yaml binding file
dt-bindings: soc: samsung: exynos-pmu: gs101: add google,pmu-intr-gen phandle
dt-bindings: soc: google: Add gs101-pmu-intr-gen binding documentation
bus: fsl-mc: Use strscpy() instead of strscpy_pad()
soc: fsl: qbman: Remove const from portal->cgrs allocation type
bus: fsl_mc: Fix driver_managed_dma check
bus: fsl-mc: increase MC_CMD_COMPLETION_TIMEOUT_MS value
bus: fsl-mc: drop useless cleanup
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform drivers updates from Ilpo Järvinen:
"The changes are mostly business as usual. Besides pdx86 changes, there
are a few power supply changes needed for related pdx86 features, move
of oxpec driver from hwmon (oxp-sensors) to pdx86, and one FW version
warning to hid-asus.
Highlights:
- alienware-wmi-wmax:
- Add HWMON support
- Add ABI and admin-guide documentation
- Expose GPIO debug methods through debug FS
- Support manual fan control and "custom" thermal profile
- amd/hsmp:
- Add sysfs files to show HSMP telemetry
- Report power readings and limits via hwmon
- amd/isp4: Add AMD ISP platform config for OV05C10
- asus-wmi:
- Refactor Ally suspend/resume to work better with older FW
- hid-asus: check ROG Ally MCU version and warn about old FW versions
- dasharo-acpi:
- Add driver for Dasharo devices supporting fans and temperatures
monitoring
- dell-ddv:
- Expose the battery health and manufacture date to userspace
using power supply extensions
- Implement the battery matching algorithm
- dell-pc:
- Improve error propagation
- Use faux device
- int3472:
- Add delays to avoid GPIO regulator spikes
- Add handshake pin support
- Make regulator supply name configurable and allow registering
more than 1 GPIO regulator
- Map mt9m114 powerdown pin to powerenable
- intel/pmc: Add separate SSRAM Telemetry driver
- intel-uncore-freq: Add attributes to show agent types and die ID
- ISST:
- Support SST-TF revision 2 (allows more cores per bucket)
- Support SST-PP revision 2 (fabric 1 frequencies)
- Remove unnecessary SST MSRs restore (the package retains MSRs
despite CPU offlining)
- mellanox: Add support for SN2201, SN4280, SN5610, and SN5640
- mellanox: mlxbf-pmc: Support additional PMC blocks
- oxpec:
- Add OneXFly variants
- Add support for charge limit, charge thresholds, and turbo LED
- Distinguish current X1 variants to avoid unwanted matching to
new variants
- Follow hwmon conventions
- Move from hwmon/oxp-sensors to platform/x86 to match the
enlarged scope
- power supply:
- Add inhibit-charge-awake (needed by oxpec)
- Add additional battery health status values ("blown fuse" and
"cell imbalance") (needed by dell-ddv)
- powerwell-ec: Add driver for Portwell EC supporting GPIO and watchdog
- thinkpad-acpi: Support camera shutter switch hotkey
- tuxedo: Add virtual LampArray for TUXEDO NB04 devices
- tools/power/x86/intel-speed-select:
- Support displaying SST-PP revision 2 fields
- Skip uncore frequency update on newer generations of CPUs
- Miscellaneous cleanups / refactoring / improvements"
* tag 'platform-drivers-x86-v6.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (112 commits)
thermal/drivers/acerhdf: Constify struct thermal_zone_device_ops
platform/x86/amd/hsmp: fix building with CONFIG_HWMON=m
platform/x86: asus-wmi: fix build without CONFIG_SUSPEND
docs: ABI: Fix "aassociated" to "associated"
platform/x86: Add AMD ISP platform config for OV05C10
Documentation: admin-guide: pm: Add documentation for die_id
platform/x86/intel-uncore-freq: Add attributes to show die_id
platform/x86/intel: power-domains: Add interface to get Linux die ID
Documentation: admin-guide: pm: Add documentation for agent_types
platform/x86/intel-uncore-freq: Add attributes to show agent types
platform/x86/tuxedo: Prevent invalid Kconfig state
platform/x86: dell-ddv: Expose the battery health to userspace
platform/x86: dell-ddv: Expose the battery manufacture date to userspace
platform/x86: dell-ddv: Implement the battery matching algorithm
power: supply: core: Add additional health status values
platform/x86/amd/hsmp: acpi: Add sysfs files to display HSMP telemetry
platform/x86/amd/hsmp: Report power via hwmon sensors
platform/x86/amd/hsmp: Use a single DRIVER_VERSION for all hsmp modules
platform/mellanox: mlxreg-dpu: Fix smatch warnings
platform: mellanox: nvsw-sn2200: Fix .items in nvsw_sn2201_busbar_hotplug
...
|
|
Pull drm updates from Dave Airlie:
"As part of building up nova-core/nova-drm pieces we've brought in some
rust abstractions through this tree, aux bus being the main one, with
devres changes also in the driver-core tree. Along with the drm core
abstractions and enough nova-core/nova-drm to use them. This is still
all stub work under construction, to build the nova driver upstream.
The other big NVIDIA related one is nouveau adds support for
Hopper/Blackwell GPUs, this required a new GSP firmware update to
570.144, and a bunch of rework in order to support multiple fw
interfaces.
There is also the introduction of an asahi uapi header file as a
precursor to getting the real driver in later, but to unblock
userspace mesa packages while the driver is trapped behind rust
enablement.
Otherwise it's the usual mixture of stuff all over, amdgpu, i915/xe,
and msm being the main ones, and some changes to vsprintf.
new drivers:
- bring in the asahi uapi header standalone
- nova-drm: stub driver
rust dependencies (for nova-core):
- auxiliary
- bus abstractions
- driver registration
- sample driver
- devres changes from driver-core
- revocable changes
core:
- add Apple fourcc modifiers
- add virtio capset definitions
- extend EXPORT_SYNC_FILE for timeline syncobjs
- convert to devm_platform_ioremap_resource
- refactor shmem helper page pinning
- DP powerup/down link helpers
- extended %p4cc in vsprintf.c to support fourcc prints
- change vsprintf %p4cn to %p4chR, remove %p4cn
- Add drm_file_err function
- IN_FORMATS_ASYNC property
- move sitronix from tiny to their own subdir
rust:
- add drm core infrastructure rust abstractions
(device/driver, ioctl, file, gem)
dma-buf:
- adjust sg handling to not cache map on attach
- allow setting dma-device for import
- Add a helper to sort and deduplicate dma_fence arrays
docs:
- updated drm scheduler docs
- fbdev todo update
- fb rendering
- actual brightness
ttm:
- fix delayed destroy resv object
bridge:
- add kunit tests
- convert tc358775 to atomic
- convert drivers to devm_drm_bridge_alloc
- convert rk3066_hdmi to bridge driver
scheduler:
- add kunit tests
panel:
- refcount panels to improve lifetime handling
- Powertip PH128800T004-ZZA01
- NLT NL13676BC25-03F, Tianma TM070JDHG34-00
- Himax HX8279/HX8279-D DDIC
- Visionox G2647FB105
- Sitronix ST7571
- ZOTAC rotation quirk
vkms:
- allow attaching more displays
i915:
- xe3lpd display updates
- vrr refactor
- intel_display struct conversions
- xe2hpd memory type identification
- add link rate/count to i915_display_info
- cleanup VGA plane handling
- refactor HDCP GSC
- fix SLPC wait boosting reference counting
- add 20ms delay to engine reset
- fix fence release on early probe errors
xe:
- SRIOV updates
- BMG PCI ID update
- support separate firmware for each GT
- SVM fix, prelim SVM multi-device work
- export fan speed
- temp disable d3cold on BMG
- backup VRAM in PM notifier instead of suspend/freeze
- update xe_ttm_access_memory to use GPU for non-visible access
- fix guc_info debugfs for VFs
- use copy_from_user instead of __copy_from_user
- append PCIe gen5 limitations to xe_firmware document
amdgpu:
- DSC cleanup
- DC Scaling updates
- Fused I2C-over-AUX updates
- DMUB updates
- Use drm_file_err in amdgpu
- Enforce isolation updates
- Use new dma_fence helpers
- USERQ fixes
- Documentation updates
- SR-IOV updates
- RAS updates
- PSP 12 cleanups
- GC 9.5 updates
- SMU 13.x updates
- VCN / JPEG SR-IOV updates
amdkfd:
- Update error messages for SDMA
- Userptr updates
- XNACK fixes
radeon:
- CIK doorbell cleanup
nouveau:
- add support for NVIDIA r570 GSP firmware
- enable Hopper/Blackwell support
nova-core:
- fix task list
- register definition infrastructure
- move firmware into own rust module
- register auxiliary device for nova-drm
nova-drm:
- initial driver skeleton
msm:
- GPU:
- ACD (adaptive clock distribution) for X1-85
- drop fictional address_space_size
- improve GMU HFI response time out robustness
- fix crash when throttling during boot
- DPU:
- use single CTL path for flushing on DPU 5.x+
- improve SSPP allocation code for better sharing
- Enabled SmartDMA on SM8150, SC8180X, SC8280XP, SM8550
- Added SAR2130P support
- Disabled DSC support on MSM8937, MSM8917, MSM8953, SDM660
- DP:
- switch to new audio helpers
- better LTTPR handling
- DSI:
- Added support for SA8775P
- Added SAR2130P support
- HDMI:
- Switched to use new helpers for ACR data
- Fixed old standing issue of HPD not working in some cases
amdxdna:
- add dma-buf support
- allow empty command submits
renesas:
- add dma-buf support
- add zpos, alpha, blend support
panthor:
- fail properly for NO_MMAP bos
- add SET_LABEL ioctl
- debugfs BO dumping support
imagination:
- update DT bindings
- support TI AM68 GPU
hibmc:
- improve interrupt handling and HPD support
virtio:
- add panic handler support
rockchip:
- add RK3588 support
- add DP AUX bus panel support
ivpu:
- add heartbeat based hangcheck
mediatek:
- prepares support for MT8195/99 HDMIv2/DDCv2
anx7625:
- improve HPD
tegra:
- speed up firmware loading
* tag 'drm-next-2025-05-28' of https://gitlab.freedesktop.org/drm/kernel: (1627 commits)
drm/nouveau/tegra: Fix error pointer vs NULL return in nvkm_device_tegra_resource_addr()
drm/xe: Default auto_link_downgrade status to false
drm/xe/guc: Make creation of SLPC debugfs files conditional
drm/i915/display: Add check for alloc_ordered_workqueue() and alloc_workqueue()
drm/i915/dp_mst: Work around Thunderbolt sink disconnect after SINK_COUNT_ESI read
drm/i915/ptl: Use everywhere the correct DDI port clock select mask
drm/nouveau/kms: add support for GB20x
drm/dp: add option to disable zero sized address only transactions.
drm/nouveau: add support for GB20x
drm/nouveau/gsp: add hal for fifo.chan.doorbell_handle
drm/nouveau: add support for GB10x
drm/nouveau/gf100-: track chan progress with non-WFI semaphore release
drm/nouveau/nv50-: separate CHANNEL_GPFIFO handling out from CHANNEL_DMA
drm/nouveau: add helper functions for allocating pinned/cpu-mapped bos
drm/nouveau: add support for GH100
drm/nouveau: improve handling of 64-bit BARs
drm/nouveau/gv100-: switch to volta semaphore methods
drm/nouveau/gsp: support deeper page tables in COPY_SERVER_RESERVED_PDES
drm/nouveau/gsp: init client VMMs with NV0080_CTRL_DMA_SET_PAGE_DIRECTORY
drm/nouveau/gsp: fetch level shift and PDE from BAR2 VMM
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"We have three new drivers, some refactoring in the GPIO core, lots of
various changes across many drivers, new configfs interface for the
virtual gpio-aggregator module and DT-bindings updates.
The treewide conversion of GPIO drivers to using the new value setter
callbacks is ongoing with another round of GPIO drivers updated. You
will also see these commits coming in from other subsystems as with
the relevant changes merged into mainline last cycle, I've started
converting GPIO providers located elsewhere than drivers/gpio/.
GPIO core:
- use more lock guards where applicable
- refactor GPIO ACPI code and shrink it in the process by 8%
- move GPIO ACPI quirks into a separate file
- remove unneeded #ifdef
- convert GPIO devres helpers to using devm_add_action() where
applicable which shrinks and simplifies the code
- refactor GPIO descriptor validation in GPIO consumer interfaces
- don't allow setting values on input lines in the GPIO core which
will take off the burden from GPIO drivers of checking this down
the line
- provide gpiod_is_equal() as a way of safely comparing two GPIO
descriptors (the only current user is in regulator core)
New drivers:
- add the GPIO module for the max77759 multifunction device
- add the GPIO driver for the VeriSilicon BLZP1600 GPIO controller
- add the GPIO driver for the Spacemit K1 SoC
Driver improvements:
- convert more drivers to using the new GPIO line value setter
callbacks
- convert more drivers to making the irq_chip immutable as is
recommended by the interrupt subsystem
- extend build testing coverage by enabling more modules to be built
with COMPILE_TEST=y
- extend the gpio-aggregator module with a configfs interface that
makes the setup easier for user-space than the existing
driver-level sysfs attributes and also adds more advanced
configuration features (such as referring to aggregated lines by
their original names or modifying their names as exposed by the
aggregated chip)
- add a missing mutex_destroy() in gpio-imx-scu
- add an OF polarity quirk for s5m8767
- allow building gpio-vf610 as a loadable module
- make gpio-mxc not hardcode its GPIO base number with GPIO SYSFS
interface disabled (another small step towards getting rid of the
global GPIO numberspace)
- add support for level-triggered interrupts to gpio-pca953x
- don't double-check the ngpios property in gpio-ds4520 as GPIO core
already does it
- don't double-check the number of GPIOs in gpio-imx-scu as GPIO core
already does it
- remove unused callbacks from gpio-max3191x
DT bindings:
- add device-tree bindings for max77759, spacemit,k1 and blzp1600
(new drivers added this cycle)
- document more properties for gpio-vf610 and gpio-tegra186
- document a new pca95xx variant
- fix style of examples in several GPIO DT-binding documents
Misc:
- TODO list updates"
* tag 'gpio-updates-for-v6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (123 commits)
gpio: timberdale: select GPIOLIB_IRQCHIP
gpio: lpc18xx: select GPIOLIB_IRQCHIP
gpio: grgpio: select GPIOLIB_IRQCHIP
gpio: bcm-kona: select GPIOLIB_IRQCHIP
dt-bindings: gpio: vf610: add ngpios and gpio-reserved-ranges
gpio: davinci: select GPIOLIB_IRQCHIP
gpiolib-acpi: Update file references in the Documentation and MAINTAINERS
gpiolib: acpi: Move quirks to a separate file
gpiolib: acpi: Add acpi_gpio_need_run_edge_events_on_boot() getter
gpiolib: acpi: Handle deferred list via new API
gpiolib: acpi: Make sure we fill struct acpi_gpio_info
gpiolib: acpi: Switch to use enum in acpi_gpio_in_ignore_list()
gpiolib: acpi: Use temporary variable for struct acpi_gpio_info
gpiolib: remove unneeded #ifdef
gpio: mpc8xxx: select GPIOLIB_IRQCHIP
gpio: pxa: select GPIOLIB_IRQCHIP
gpio: pxa: Make irq_chip immutable
gpio: timberdale: Make irq_chip immutable
gpio: xgene-sb: Make irq_chip immutable
gpio: davinci: Make irq_chip immutable
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome-platform updates from Tzung-Bi Shih:
"New:
- Support MT8192 Spherion and MT8186 Corsola devices in of_hw_prober
- Turn cros_ec_proto from bool into tristate
- Support Pin Assignment E in cros_ec_typec for USB-C to DP cables
Improvements:
- Avoid -Wflex-array-member-not-at-end warnings
Cleanups:
- Remove a redundant dependency in Kconfig for cros_kbd_led_backlight"
* tag 'chrome-platform-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
platform/chrome: kunit: Avoid -Wflex-array-member-not-at-end
platform/chrome: cros_ec_typec: Set Pin Assignment E in DP PORT VDO
platform/chrome: of_hw_prober: Support touchscreen probing on Squirtle
platform/chrome: of_hw_prober: Support trackpad probing on Corsola family
platform/chrome: cros_kbd_led_backlight: Fix build dependencies
platform/chrome: cros_kbd_led_backlight: Remove CROS_EC dependency
platform/chrome: cros_ec_proto: Allow to build as module
platform/chrome: cros_ec_debugfs: Avoid -Wflex-array-member-not-at-end warnings
platform/chrome: cros_kbd_led_backlight: Avoid -Wflex-array-member-not-at-end warnings
platform/chrome: cros_ec_proto: Avoid -Wflex-array-member-not-at-end warnings
platform/chrome: of_hw_prober: Support Google Spherion
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core x86 updates from Ingo Molnar:
"Boot code changes:
- A large series of changes to reorganize the x86 boot code into a
better isolated and easier to maintain base of PIC early startup
code in arch/x86/boot/startup/, by Ard Biesheuvel.
Motivation & background:
| Since commit
|
| c88d71508e36 ("x86/boot/64: Rewrite startup_64() in C")
|
| dated Jun 6 2017, we have been using C code on the boot path in a way
| that is not supported by the toolchain, i.e., to execute non-PIC C
| code from a mapping of memory that is different from the one provided
| to the linker. It should have been obvious at the time that this was a
| bad idea, given the need to sprinkle fixup_pointer() calls left and
| right to manipulate global variables (including non-pointer variables)
| without crashing.
|
| This C startup code has been expanding, and in particular, the SEV-SNP
| startup code has been expanding over the past couple of years, and
| grown many of these warts, where the C code needs to use special
| annotations or helpers to access global objects.
This tree includes the first phase of this work-in-progress x86
boot code reorganization.
Scalability enhancements and micro-optimizations:
- Improve code-patching scalability (Eric Dumazet)
- Remove MFENCEs for X86_BUG_CLFLUSH_MONITOR (Andrew Cooper)
CPU features enumeration updates:
- Thorough reorganization and cleanup of CPUID parsing APIs (Ahmed S.
Darwish)
- Fix, refactor and clean up the cacheinfo code (Ahmed S. Darwish,
Thomas Gleixner)
- Update CPUID bitfields to x86-cpuid-db v2.3 (Ahmed S. Darwish)
Memory management changes:
- Allow temporary MMs when IRQs are on (Andy Lutomirski)
- Opt-in to IRQs-off activate_mm() (Andy Lutomirski)
- Simplify choose_new_asid() and generate better code (Borislav
Petkov)
- Simplify 32-bit PAE page table handling (Dave Hansen)
- Always use dynamic memory layout (Kirill A. Shutemov)
- Make SPARSEMEM_VMEMMAP the only memory model (Kirill A. Shutemov)
- Make 5-level paging support unconditional (Kirill A. Shutemov)
- Stop prefetching current->mm->mmap_lock on page faults (Mateusz
Guzik)
- Predict valid_user_address() returning true (Mateusz Guzik)
- Consolidate initmem_init() (Mike Rapoport)
FPU support and vector computing:
- Enable Intel APX support (Chang S. Bae)
- Reorgnize and clean up the xstate code (Chang S. Bae)
- Make task_struct::thread constant size (Ingo Molnar)
- Restore fpu_thread_struct_whitelist() to fix
CONFIG_HARDENED_USERCOPY=y (Kees Cook)
- Simplify the switch_fpu_prepare() + switch_fpu_finish() logic (Oleg
Nesterov)
- Always preserve non-user xfeatures/flags in __state_perm (Sean
Christopherson)
Microcode loader changes:
- Help users notice when running old Intel microcode (Dave Hansen)
- AMD: Do not return error when microcode update is not necessary
(Annie Li)
- AMD: Clean the cache if update did not load microcode (Boris
Ostrovsky)
Code patching (alternatives) changes:
- Simplify, reorganize and clean up the x86 text-patching code (Ingo
Molnar)
- Make smp_text_poke_batch_process() subsume
smp_text_poke_batch_finish() (Nikolay Borisov)
- Refactor the {,un}use_temporary_mm() code (Peter Zijlstra)
Debugging support:
- Add early IDT and GDT loading to debug relocate_kernel() bugs
(David Woodhouse)
- Print the reason for the last reset on modern AMD CPUs (Yazen
Ghannam)
- Add AMD Zen debugging document (Mario Limonciello)
- Fix opcode map (!REX2) superscript tags (Masami Hiramatsu)
- Stop decoding i64 instructions in x86-64 mode at opcode (Masami
Hiramatsu)
CPU bugs and bug mitigations:
- Remove X86_BUG_MMIO_UNKNOWN (Borislav Petkov)
- Fix SRSO reporting on Zen1/2 with SMT disabled (Borislav Petkov)
- Restructure and harmonize the various CPU bug mitigation methods
(David Kaplan)
- Fix spectre_v2 mitigation default on Intel (Pawan Gupta)
MSR API:
- Large MSR code and API cleanup (Xin Li)
- In-kernel MSR API type cleanups and renames (Ingo Molnar)
PKEYS:
- Simplify PKRU update in signal frame (Chang S. Bae)
NMI handling code:
- Clean up, refactor and simplify the NMI handling code (Sohil Mehta)
- Improve NMI duration console printouts (Sohil Mehta)
Paravirt guests interface:
- Restrict PARAVIRT_XXL to 64-bit only (Kirill A. Shutemov)
SEV support:
- Share the sev_secrets_pa value again (Tom Lendacky)
x86 platform changes:
- Introduce the <asm/amd/> header namespace (Ingo Molnar)
- i2c: piix4, x86/platform: Move the SB800 PIIX4 FCH definitions to
<asm/amd/fch.h> (Mario Limonciello)
Fixes and cleanups:
- x86 assembly code cleanups and fixes (Uros Bizjak)
- Misc fixes and cleanups (Andi Kleen, Andy Lutomirski, Andy
Shevchenko, Ard Biesheuvel, Bagas Sanjaya, Baoquan He, Borislav
Petkov, Chang S. Bae, Chao Gao, Dan Williams, Dave Hansen, David
Kaplan, David Woodhouse, Eric Biggers, Ingo Molnar, Josh Poimboeuf,
Juergen Gross, Malaya Kumar Rout, Mario Limonciello, Nathan
Chancellor, Oleg Nesterov, Pawan Gupta, Peter Zijlstra, Shivank
Garg, Sohil Mehta, Thomas Gleixner, Uros Bizjak, Xin Li)"
* tag 'x86-core-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (331 commits)
x86/bugs: Fix spectre_v2 mitigation default on Intel
x86/bugs: Restructure ITS mitigation
x86/xen/msr: Fix uninitialized variable 'err'
x86/msr: Remove a superfluous inclusion of <asm/asm.h>
x86/paravirt: Restrict PARAVIRT_XXL to 64-bit only
x86/mm/64: Make 5-level paging support unconditional
x86/mm/64: Make SPARSEMEM_VMEMMAP the only memory model
x86/mm/64: Always use dynamic memory layout
x86/bugs: Fix indentation due to ITS merge
x86/cpuid: Rename hypervisor_cpuid_base()/for_each_possible_hypervisor_cpuid_base() to cpuid_base_hypervisor()/for_each_possible_cpuid_base_hypervisor()
x86/cpu/intel: Rename CPUID(0x2) descriptors iterator parameter
x86/cacheinfo: Rename CPUID(0x2) descriptors iterator parameter
x86/cpuid: Rename cpuid_get_leaf_0x2_regs() to cpuid_leaf_0x2()
x86/cpuid: Rename have_cpuid_p() to cpuid_feature()
x86/cpuid: Set <asm/cpuid/api.h> as the main CPUID header
x86/cpuid: Move CPUID(0x2) APIs into <cpuid/api.h>
x86/msr: Add rdmsrl_on_cpu() compatibility wrapper
x86/mm: Fix kernel-doc descriptions of various pgtable methods
x86/asm-offsets: Export certain 'struct cpuinfo_x86' fields for 64-bit asm use too
x86/boot: Defer initialization of VM space related global variables
...
|
|
'struct thermal_zone_device_ops' could be left unmodified in this driver.
Constifying this structure moves some data to a read-only section, so
increases overall security, especially when the structure holds some
function pointers.
While at it, also constify a struct thermal_zone_params.
On a x86_64, with allmodconfig:
Before:
======
text data bss dec hex filename
26422 12584 512 39518 9a5e drivers/platform/x86/acerhdf.o
After:
=====
text data bss dec hex filename
26646 12360 512 39518 9a5e drivers/platform/x86/acerhdf.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/e502fadf2c6b24fc4ec3a7880533f7ca68429720.1748177235.git.christophe.jaillet@wanadoo.fr
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
