| Age | Commit message (Collapse) | Author |
|---|
|
The Qualcomm SM7225 is practically identical to SM6350, so add an entry
using that data.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20241220-pd-mapper-sm7225-v1-1-68f85a87288d@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
This function is unused and causing compile errors, delete it.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Link: https://lore.kernel.org/linux-next/20250106164630.4447cd0d@canb.auug.org.au/
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
RPa is the Achievable frequency, defined by PCODE at runtime
based on multiple running conditions.
v2: Remove RPA_MASK from i915 file
Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241220152936.623627-1-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into clk-fixes
Pull an Allwinner clk driver fix from Chen-Yu Tsai:
Only one patch, accidentally left out of the 6.13 pull request.
The patch enables automatic clk reparenting for MMC clocks on A100,
thereby fixing MMC support.
* tag 'sunxi-clk-fixes-for-6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
clk: sunxi-ng: a100: enable MMC clock reparenting
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Four driver fixes in UFS, mostly to do with power management"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: qcom: Power down the controller/device during system suspend for SM8550/SM8650 SoCs
scsi: ufs: qcom: Allow passing platform specific OF data
scsi: ufs: core: Honor runtime/system PM levels if set by host controller drivers
scsi: ufs: qcom: Power off the PHY if it was already powered on in ufs_qcom_power_up_sequence()
|
|
Setting the genpd's struct device's name with dev_set_name() is
happening within pm_genpd_init(). If it remains NULL, things can blow up
later, such as when crafting the devfs hierarchy for the power domain:
Unable to handle kernel NULL pointer dereference at virtual address 00000000 when read
...
Call trace:
strlen from start_creating+0x90/0x138
start_creating from debugfs_create_dir+0x20/0x178
debugfs_create_dir from genpd_debug_add.part.0+0x4c/0x144
genpd_debug_add.part.0 from genpd_debug_init+0x74/0x90
genpd_debug_init from do_one_initcall+0x5c/0x244
do_one_initcall from kernel_init_freeable+0x19c/0x1f4
kernel_init_freeable from kernel_init+0x1c/0x12c
kernel_init from ret_from_fork+0x14/0x28
Bisecting tracks this crash back to commit 899f44531fe6 ("pmdomain: core:
Add GENPD_FLAG_DEV_NAME_FW flag"), which exchanges use of genpd->name
with dev_name(&genpd->dev) in genpd_debug_add.part().
Fixes: 899f44531fe6 ("pmdomain: core: Add GENPD_FLAG_DEV_NAME_FW flag")
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Cc: stable@vger.kernel.org # v6.12+
Link: https://lore.kernel.org/r/20241231190336.423172-1-lkundrak@v3.sk
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
for_each_possible_cpu
The 'np' device_node is initialized via of_cpu_device_node_get(), which
requires explicit calls to of_node_put() when it is no longer required
to avoid leaking the resource.
Instead of adding the missing calls to of_node_put() in all execution
paths, use the cleanup attribute for 'np' by means of the __free()
macro, which automatically calls of_node_put() when the variable goes
out of scope. Given that 'np' is only used within the
for_each_possible_cpu(), reduce its scope to release the nood after
every iteration of the loop.
Fixes: 6abf32f1d9c5 ("cpuidle: Add RISC-V SBI CPU idle driver")
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20241116-cpuidle-riscv-sbi-cleanup-v3-1-a3a46372ce08@gmail.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Currently, HIP08 devices does not register the ptp devices, so the
hdev->ptp is NULL. But the tx process would still try to set hardware time
stamp info with SKBTX_HW_TSTAMP flag and cause a kernel crash.
[ 128.087798] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000018
...
[ 128.280251] pc : hclge_ptp_set_tx_info+0x2c/0x140 [hclge]
[ 128.286600] lr : hclge_ptp_set_tx_info+0x20/0x140 [hclge]
[ 128.292938] sp : ffff800059b93140
[ 128.297200] x29: ffff800059b93140 x28: 0000000000003280
[ 128.303455] x27: ffff800020d48280 x26: ffff0cb9dc814080
[ 128.309715] x25: ffff0cb9cde93fa0 x24: 0000000000000001
[ 128.315969] x23: 0000000000000000 x22: 0000000000000194
[ 128.322219] x21: ffff0cd94f986000 x20: 0000000000000000
[ 128.328462] x19: ffff0cb9d2a166c0 x18: 0000000000000000
[ 128.334698] x17: 0000000000000000 x16: ffffcf1fc523ed24
[ 128.340934] x15: 0000ffffd530a518 x14: 0000000000000000
[ 128.347162] x13: ffff0cd6bdb31310 x12: 0000000000000368
[ 128.353388] x11: ffff0cb9cfbc7070 x10: ffff2cf55dd11e02
[ 128.359606] x9 : ffffcf1f85a212b4 x8 : ffff0cd7cf27dab0
[ 128.365831] x7 : 0000000000000a20 x6 : ffff0cd7cf27d000
[ 128.372040] x5 : 0000000000000000 x4 : 000000000000ffff
[ 128.378243] x3 : 0000000000000400 x2 : ffffcf1f85a21294
[ 128.384437] x1 : ffff0cb9db520080 x0 : ffff0cb9db500080
[ 128.390626] Call trace:
[ 128.393964] hclge_ptp_set_tx_info+0x2c/0x140 [hclge]
[ 128.399893] hns3_nic_net_xmit+0x39c/0x4c4 [hns3]
[ 128.405468] xmit_one.constprop.0+0xc4/0x200
[ 128.410600] dev_hard_start_xmit+0x54/0xf0
[ 128.415556] sch_direct_xmit+0xe8/0x634
[ 128.420246] __dev_queue_xmit+0x224/0xc70
[ 128.425101] dev_queue_xmit+0x1c/0x40
[ 128.429608] ovs_vport_send+0xac/0x1a0 [openvswitch]
[ 128.435409] do_output+0x60/0x17c [openvswitch]
[ 128.440770] do_execute_actions+0x898/0x8c4 [openvswitch]
[ 128.446993] ovs_execute_actions+0x64/0xf0 [openvswitch]
[ 128.453129] ovs_dp_process_packet+0xa0/0x224 [openvswitch]
[ 128.459530] ovs_vport_receive+0x7c/0xfc [openvswitch]
[ 128.465497] internal_dev_xmit+0x34/0xb0 [openvswitch]
[ 128.471460] xmit_one.constprop.0+0xc4/0x200
[ 128.476561] dev_hard_start_xmit+0x54/0xf0
[ 128.481489] __dev_queue_xmit+0x968/0xc70
[ 128.486330] dev_queue_xmit+0x1c/0x40
[ 128.490856] ip_finish_output2+0x250/0x570
[ 128.495810] __ip_finish_output+0x170/0x1e0
[ 128.500832] ip_finish_output+0x3c/0xf0
[ 128.505504] ip_output+0xbc/0x160
[ 128.509654] ip_send_skb+0x58/0xd4
[ 128.513892] udp_send_skb+0x12c/0x354
[ 128.518387] udp_sendmsg+0x7a8/0x9c0
[ 128.522793] inet_sendmsg+0x4c/0x8c
[ 128.527116] __sock_sendmsg+0x48/0x80
[ 128.531609] __sys_sendto+0x124/0x164
[ 128.536099] __arm64_sys_sendto+0x30/0x5c
[ 128.540935] invoke_syscall+0x50/0x130
[ 128.545508] el0_svc_common.constprop.0+0x10c/0x124
[ 128.551205] do_el0_svc+0x34/0xdc
[ 128.555347] el0_svc+0x20/0x30
[ 128.559227] el0_sync_handler+0xb8/0xc0
[ 128.563883] el0_sync+0x160/0x180
Fixes: 0bf5eb788512 ("net: hns3: add support for PTP")
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/20250106143642.539698-8-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The TQP BAR space is divided into two segments. TQPs 0-1023 and TQPs
1024-1279 are in different BAR space addresses. However,
hclge_fetch_pf_reg does not distinguish the tqp space information when
reading the tqp space information. When the number of TQPs is greater
than 1024, access bar space overwriting occurs.
The problem of different segments has been considered during the
initialization of tqp.io_base. Therefore, tqp.io_base is directly used
when the queue is read in hclge_fetch_pf_reg.
The error message:
Unable to handle kernel paging request at virtual address ffff800037200000
pc : hclge_fetch_pf_reg+0x138/0x250 [hclge]
lr : hclge_get_regs+0x84/0x1d0 [hclge]
Call trace:
hclge_fetch_pf_reg+0x138/0x250 [hclge]
hclge_get_regs+0x84/0x1d0 [hclge]
hns3_get_regs+0x2c/0x50 [hns3]
ethtool_get_regs+0xf4/0x270
dev_ethtool+0x674/0x8a0
dev_ioctl+0x270/0x36c
sock_do_ioctl+0x110/0x2a0
sock_ioctl+0x2ac/0x530
__arm64_sys_ioctl+0xa8/0x100
invoke_syscall+0x4c/0x124
el0_svc_common.constprop.0+0x140/0x15c
do_el0_svc+0x30/0xd0
el0_svc+0x1c/0x2c
el0_sync_handler+0xb0/0xb4
el0_sync+0x168/0x180
Fixes: 939ccd107ffc ("net: hns3: move dump regs function to a separate file")
Signed-off-by: Hao Lan <lanhao@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Link: https://patch.msgid.link/20250106143642.539698-7-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently the misc irq is initialized before reset_timer setup. But
it will access the reset_timer in the irq handler. So initialize
the reset_timer earlier.
Fixes: ff200099d271 ("net: hns3: remove unnecessary work in hclgevf_main")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Link: https://patch.msgid.link/20250106143642.539698-6-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, there is a time window between misc irq enabled
and service task inited. If an interrupte is reported at
this time, it will cause warning like below:
[ 16.324639] Call trace:
[ 16.324641] __queue_delayed_work+0xb8/0xe0
[ 16.324643] mod_delayed_work_on+0x78/0xd0
[ 16.324655] hclge_errhand_task_schedule+0x58/0x90 [hclge]
[ 16.324662] hclge_misc_irq_handle+0x168/0x240 [hclge]
[ 16.324666] __handle_irq_event_percpu+0x64/0x1e0
[ 16.324667] handle_irq_event+0x80/0x170
[ 16.324670] handle_fasteoi_edge_irq+0x110/0x2bc
[ 16.324671] __handle_domain_irq+0x84/0xfc
[ 16.324673] gic_handle_irq+0x88/0x2c0
[ 16.324674] el1_irq+0xb8/0x140
[ 16.324677] arch_cpu_idle+0x18/0x40
[ 16.324679] default_idle_call+0x5c/0x1bc
[ 16.324682] cpuidle_idle_call+0x18c/0x1c4
[ 16.324684] do_idle+0x174/0x17c
[ 16.324685] cpu_startup_entry+0x30/0x6c
[ 16.324687] secondary_start_kernel+0x1a4/0x280
[ 16.324688] ---[ end trace 6aa0bff672a964aa ]---
So don't auto enable misc vector when request irq..
Fixes: 7be1b9f3e99f ("net: hns3: make hclge_service use delayed workqueue")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Link: https://patch.msgid.link/20250106143642.539698-5-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch modifies the implementation of debugfs:
When the user process stops unexpectedly, not all data of the file system
is read. In this case, the save_buf pointer is not released. When the
user process is called next time, save_buf is used to copy the cached
data to the user space. As a result, the queried data is stale.
To solve this problem, this patch implements .open() and .release() handler
for debugfs file_operations. moving allocation buffer and execution
of the cmd to the .open() handler and freeing in to the .release() handler.
Allocate separate buffer for each reader and associate the buffer
with the file pointer.
When different user read processes no longer share the buffer,
the stale data problem is fixed.
Fixes: 5e69ea7ee2a6 ("net: hns3: refactor the debugfs process")
Signed-off-by: Hao Lan <lanhao@huawei.com>
Signed-off-by: Guangwei Zhang <zhangwangwei6@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/20250106143642.539698-4-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, the netdev->features is configured in hns3_nic_set_features.
As a result, __netdev_update_features considers that there is no feature
difference, and the procedures of the real features are missing.
Fixes: 2a7556bb2b73 ("net: hns3: implement ndo_features_check ops for hns3 driver")
Signed-off-by: Hao Lan <lanhao@huawei.com>
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/20250106143642.539698-3-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When a reset type that is not supported by the driver is input, a reset
pending flag bit of the HNAE3_NONE_RESET type is generated in
reset_pending. The driver does not have a mechanism to clear this type
of error. As a result, the driver considers that the reset is not
complete. This patch provides a mechanism to clear the
HNAE3_NONE_RESET flag and the parameter of
hnae3_ae_ops.set_default_reset_request is verified.
The error message:
hns3 0000:39:01.0: cmd failed -16
hns3 0000:39:01.0: hclge device re-init failed, VF is disabled!
hns3 0000:39:01.0: failed to reset VF stack
hns3 0000:39:01.0: failed to reset VF(4)
hns3 0000:39:01.0: prepare reset(2) wait done
hns3 0000:39:01.0 eth4: already uninitialized
Use the crash tool to view struct hclgevf_dev:
struct hclgevf_dev {
...
default_reset_request = 0x20,
reset_level = HNAE3_NONE_RESET,
reset_pending = 0x100,
reset_type = HNAE3_NONE_RESET,
...
};
Fixes: 720bd5837e37 ("net: hns3: add set_default_reset_request in the hnae3_ae_ops")
Signed-off-by: Hao Lan <lanhao@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Link: https://patch.msgid.link/20250106143642.539698-2-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
For each NAND_OP_WAITRDY_INSTR operation, the NANDFSR register is
polled only once every 100 us to check for the EMA_WAIT pin. This
isn't frequent enough and causes delays in NAND accesses.
Set the polling interval to 5 us. It increases the page read speed
reported by flash_speed by ~30% (~10% on page writes).
Signed-off-by: Bastien Curutchet <bastien.curutchet@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Fix a buffer overflow issue in qcom_clear_bam_transaction by using
struct_group to group related fields and avoid FORTIFY_SOURCE warnings.
On x86 architecture, the following error occurs due to warnings being
treated as errors:
In function ‘fortify_memset_chk’,
inlined from ‘qcom_clear_bam_transaction’ at
drivers/mtd/nand/qpic_common.c:88:2:
./include/linux/fortify-string.h:480:25: error: call to ‘__write_overflow_field’
declared with attribute warning: detected write beyond size of field
(1st parameter); maybe use struct_group()? [-Werror=attribute-warning]
480 | __write_overflow_field(p_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
LD [M] drivers/mtd/nand/nandcore.o
CC [M] drivers/w1/masters/mxc_w1.o
cc1: all warnings being treated as errors
This patch addresses the issue by grouping the related fields in
struct bam_transaction using struct_group and updating the memset call
accordingly.
Fixes: 8c52932da5e6 ("mtd: rawnand: qcom: cleanup qcom_nandc driver")
Signed-off-by: Md Sadre Alam <quic_mdalam@quicinc.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mikulas Patocka:
- dm-array fixes
- dm-verity forward error correction fixes
- remove the flag DM_TARGET_PASSES_INTEGRITY from dm-ebs
- dm-thin RCU list fix
* tag 'for-6.13/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm thin: make get_first_thin use rcu-safe list first function
dm-ebs: don't set the flag DM_TARGET_PASSES_INTEGRITY
dm-verity FEC: Avoid copying RS parity bytes twice.
dm-verity FEC: Fix RS FEC repair for roots unaligned to block size (take 2)
dm array: fix cursor index when skipping across block boundaries
dm array: fix unreleased btree blocks on closing a faulty array cursor
dm array: fix releasing a faulty array block twice in dm_array_cursor_end
|
|
Enable MSI-X if the endpoint supports.
Signed-off-by: Vivek Pernamitta <quic_vpernami@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20250108-msix-v2-1-dc4466922350@quicinc.com
[mani: added pci_generic prefix to subject]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
The MAX15303 is a full-featured, flexible, efficient, 6A digital
point-of-load (PoL) controller with integrated switching MOSFETs. It
contains advanced power management and telemetry features.
Tested-by: Robin Getz <rgetz503@gmail.com>
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20250108-dev-max15303-v1-1-9154eb2c9d9e@analog.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
kthread_create() creates a kthread without running it yet. kthread_run()
creates a kthread and runs it.
On the other hand, kthread_create_worker() creates a kthread worker and
runs it.
This difference in behaviours is confusing. Also there is no way to
create a kthread worker and affine it using kthread_bind_mask() or
kthread_affine_preferred() before starting it.
Consolidate the behaviours and introduce kthread_run_worker[_on_cpu]()
that behaves just like kthread_run(). kthread_create_worker[_on_cpu]()
will now only create a kthread worker without starting it.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
|
|
The sysfs core now allows instances of 'struct bin_attribute' to be
moved into read-only memory. Make use of that to protect them against
accidental or malicious modifications.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/20241216-sysfs-const-bin_attr-zorro-v1-1-220a38d49507@weissschuh.net
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
|
|
Use usb_autopm_get_interface() and usb_autopm_put_interface()
in btmtk_usb_shutdown(), it could send func ctrl after enabling
autosuspend.
Bluetooth: btmtk_usb_hci_wmt_sync() hci0: Execution of wmt command
timed out
Bluetooth: btmtk_usb_shutdown() hci0: Failed to send wmt func ctrl
(-110)
Fixes: 5c5e8c52e3ca ("Bluetooth: btmtk: move btusb_mtk_[setup, shutdown] to btmtk.c")
Signed-off-by: Chris Lu <chris.lu@mediatek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
This fixes the apparent controller hang issue seen during stress test
where the host sends a truncated payload, followed by HCI commands. The
controller treats these HCI commands as a part of previously truncated
payload, leading to command timeouts.
Adding a serdev_device_wait_until_sent() call after
serdev_device_write_buf() fixed the issue.
Fixes: 689ca16e5232 ("Bluetooth: NXP: Add protocol support for NXP Bluetooth chipsets")
Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
When function of_find_device_by_node() fails, it returns NULL instead of
an error code. So the corresponding error check logic should be modified
to check whether the return value is NULL and set the error code to be
returned as -ENODEV.
Fixes: 46c15a4ff1f4 ("media: nuvoton: Add driver for NPCM video capture and encoding engine")
Cc: stable@vger.kernel.org
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Link: https://lore.kernel.org/r/20241015014053.669-1-thunder.leizhen@huawei.com
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
af9035_i2c_master_xfer
This fixes a 'ISO C90 forbids mixed declarations and code' compilation
error on af9035_i2c_master_xfer, which is caused by the sanity check added
on user controlled msg[i], before declaring the demodulator register.
Fixes: 7bf744f2de0a ("media: dvb-usb-v2: af9035: Fix null-ptr-deref in af9035_i2c_master_xfer")
Signed-off-by: Desnes Nunes <desnesn@redhat.com>
Link: https://lore.kernel.org/r/20240919172755.196907-1-desnesn@redhat.com
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Driver returns -EOPNOTSUPPORTED on unsupported parameters case in set
config. Upper level driver checks for -ENOTSUPP. Because of the return
code mismatch, the ioctls from userspace fail. Resolve the issue by
passing -ENOTSUPP during unsupported case.
Fixes: 7d3e4d807df2 ("misc: microchip: pci1xxxx: load gpio driver for the gpio controller auxiliary device enumerated by the auxiliary bus driver.")
Cc: stable <stable@kernel.org>
Signed-off-by: Rengarajan S <rengarajan.s@microchip.com>
Link: https://lore.kernel.org/r/20241205133626.1483499-3-rengarajan.s@microchip.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Resolve kernel panic caused by improper handling of IRQs while
accessing GPIO values. This is done by replacing generic_handle_irq with
handle_nested_irq.
Fixes: 1f4d8ae231f4 ("misc: microchip: pci1xxxx: Add gpio irq handler and irq helper functions irq_ack, irq_mask, irq_unmask and irq_set_type of irq_chip.")
Cc: stable <stable@kernel.org>
Signed-off-by: Rengarajan S <rengarajan.s@microchip.com>
Link: https://lore.kernel.org/r/20241205133626.1483499-2-rengarajan.s@microchip.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add support to configure GPIO pins for push-pull drive mode.
Signed-off-by: Rengarajan S <rengarajan.s@microchip.com>
Link: https://lore.kernel.org/r/20241205134956.1493091-1-rengarajan.s@microchip.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The documentation in rculist.h explains the absence of list_empty_rcu()
and cautions programmers against relying on a list_empty() ->
list_first() sequence in RCU safe code. This is because each of these
functions performs its own READ_ONCE() of the list head. This can lead
to a situation where the list_empty() sees a valid list entry, but the
subsequent list_first() sees a different view of list head state after a
modification.
In the case of dm-thin, this author had a production box crash from a GP
fault in the process_deferred_bios path. This function saw a valid list
head in get_first_thin() but when it subsequently dereferenced that and
turned it into a thin_c, it got the inside of the struct pool, since the
list was now empty and referring to itself. The kernel on which this
occurred printed both a warning about a refcount_t being saturated, and
a UBSAN error for an out-of-bounds cpuid access in the queued spinlock,
prior to the fault itself. When the resulting kdump was examined, it
was possible to see another thread patiently waiting in thin_dtr's
synchronize_rcu.
The thin_dtr call managed to pull the thin_c out of the active thins
list (and have it be the last entry in the active_thins list) at just
the wrong moment which lead to this crash.
Fortunately, the fix here is straight forward. Switch get_first_thin()
function to use list_first_or_null_rcu() which performs just a single
READ_ONCE() and returns NULL if the list is already empty.
This was run against the devicemapper test suite's thin-provisioning
suites for delete and suspend and no regressions were observed.
Signed-off-by: Krister Johansen <kjlx@templeofstupid.com>
Fixes: b10ebd34ccca ("dm thin: fix rcu_read_lock being held in code that can sleep")
Cc: stable@vger.kernel.org
Acked-by: Ming-Hung Tsai <mtsai@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
|
|
dm-ebs uses dm-bufio to process requests that are not aligned on logical
sector size. dm-bufio doesn't support passing integrity data (and it is
unclear how should it do it), so we shouldn't set the
DM_TARGET_PASSES_INTEGRITY flag.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Fixes: d3c7b35c20d6 ("dm: add emulated block size target")
|
|
Adopt the `str_read_write` helper in event logging as suggested by the
coccinelle tool.
Signed-off-by: Pranjal Shrivastava <praan@google.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/all/20250107130053.GC6991@willie-the-truck/
Link: https://lore.kernel.org/r/20250107165100.1093357-1-praan@google.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The TSM module provides guest identification and attestation when a
guest runs in CCA realm mode. By creating a dummy platform device,
let's ensure the module is automatically loaded. The udev daemon loads
the TSM module after it receives a device addition event. Once that
happens, it can be used earlier in the boot process to decrypt the
rootfs.
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20241220181236.172060-2-jeremy.linton@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
rzg2l_cru_start_streaming_vq()
Replace "buffer." -> "buffer", for consistency with rest of the
comment blocks in rzg2l_cru_start_streaming_vq().
Reported-by: Pavel Machek <pavel@denx.de>
Closes: https://lore.kernel.org/all/ZtWNFuw70nkB37EK@duo.ucw.cz/
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20240905112508.160560-1-biju.das.jz@bp.renesas.com
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Initialize rq to NULL to prevent uninitialized pointer reads.
Signed-off-by: Apoorva Singh <apoorva.singh@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241227112920.1547592-1-apoorva.singh@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Use Linux fix-width types consistently and drop a related unnecessary
cast.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
Implement the kick_vq_with_data vDPA callback.
On kick, we pass the next available data to the hardware by writing it in
the kick offset.
Signed-off-by: Yuxue Liu <yuxue.liu@jaguarmicro.com>
Message-Id: <20241203023743.1757-1-yuxue.liu@jaguarmicro.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
|
|
There is no need to define a local variable 'page',
just use outer variable 'page'.
Signed-off-by: zhang jiao <zhangjiao2@cmss.chinamobile.com>
Message-Id: <20241120054920.35291-1-zhangjiao2@cmss.chinamobile.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
|
|
f5b335dc025cfee90957efa90dc72fada0d5abb4 ("misc: ntsync: mark driver as "broken"
to prevent from building") was committed to avoid the driver being used while
only part of its functionality was released. Since the rest of the functionality
has now been committed, revert this.
Signed-off-by: Elizabeth Figura <zfigura@codeweavers.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20241213193511.457338-31-zfigura@codeweavers.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
NT waits can optionally be made "alertable". This is a special channel for
thread wakeup that is mildly similar to SIGIO. A thread has an internal single
bit of "alerted" state, and if a thread is alerted while an alertable wait, the
wait will return a special value, consume the "alerted" state, and will not
consume any of its objects.
Alerts are implemented using events; the user-space NT emulator is expected to
create an internal ntsync event for each thread and pass that event to wait
functions.
Signed-off-by: Elizabeth Figura <zfigura@codeweavers.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20241213193511.457338-16-zfigura@codeweavers.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This corresponds to the NT syscall NtQueryEvent().
This returns the signaled state of the event and whether it is manual-reset.
Signed-off-by: Elizabeth Figura <zfigura@codeweavers.com>
Link: https://lore.kernel.org/r/20241213193511.457338-15-zfigura@codeweavers.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This corresponds to the NT syscall NtQueryMutant().
This returns the recursion count, owner, and abandoned state of the mutex.
Signed-off-by: Elizabeth Figura <zfigura@codeweavers.com>
Link: https://lore.kernel.org/r/20241213193511.457338-14-zfigura@codeweavers.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This corresponds to the NT syscall NtQuerySemaphore().
This returns the current count and maximum count of the semaphore.
Signed-off-by: Elizabeth Figura <zfigura@codeweavers.com>
Link: https://lore.kernel.org/r/20241213193511.457338-13-zfigura@codeweavers.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This corresponds to the NT syscall NtPulseEvent().
This wakes up any waiters as if the event had been set, but does not set the
event, instead resetting it if it had been signalled. Thus, for a manual-reset
event, all waiters are woken, whereas for an auto-reset event, at most one
waiter is woken.
Signed-off-by: Elizabeth Figura <zfigura@codeweavers.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20241213193511.457338-12-zfigura@codeweavers.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This corresponds to the NT syscall NtResetEvent().
This sets the event to the unsignaled state, and returns its previous state.
Signed-off-by: Elizabeth Figura <zfigura@codeweavers.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20241213193511.457338-11-zfigura@codeweavers.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This corresponds to the NT syscall NtSetEvent().
This sets the event to the signaled state, and returns its previous state.
Signed-off-by: Elizabeth Figura <zfigura@codeweavers.com>
Link: https://lore.kernel.org/r/20241213193511.457338-10-zfigura@codeweavers.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This correspond to the NT syscall NtCreateEvent().
An NT event holds a single bit of state denoting whether it is signaled or
unsignaled.
There are two types of events: manual-reset and automatic-reset. When an
automatic-reset event is acquired via a wait function, its state is reset to
unsignaled. Manual-reset events are not affected by wait functions.
Whether the event is manual-reset, and its initial state, are specified at
creation time.
Signed-off-by: Elizabeth Figura <zfigura@codeweavers.com>
Link: https://lore.kernel.org/r/20241213193511.457338-9-zfigura@codeweavers.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This does not correspond to any NT syscall. Rather, when a thread dies, it
should be called by the NT emulator for each mutex, with the TID of the dying
thread.
NT mutexes are robust (in the pthread sense). When an NT thread dies, any
mutexes it owned are immediately released. Acquisition of those mutexes by other
threads will return a special value indicating that the mutex was abandoned,
like EOWNERDEAD returned from pthread_mutex_lock(), and EOWNERDEAD is indeed
used here for that purpose.
Signed-off-by: Elizabeth Figura <zfigura@codeweavers.com>
Link: https://lore.kernel.org/r/20241213193511.457338-8-zfigura@codeweavers.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This corresponds to the NT syscall NtReleaseMutant().
This syscall decrements the mutex's recursion count by one, and returns the
previous value. If the mutex is not owned by the current task, the function
instead fails and returns -EPERM.
Signed-off-by: Elizabeth Figura <zfigura@codeweavers.com>
Link: https://lore.kernel.org/r/20241213193511.457338-7-zfigura@codeweavers.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This corresponds to the NT syscall NtCreateMutant().
An NT mutex is recursive, with a 32-bit recursion counter. When acquired via
NtWaitForMultipleObjects(), the recursion counter is incremented by one. The OS
records the thread which acquired it.
The OS records the thread which acquired it. However, in order to keep this
driver self-contained, the owning thread ID is managed by user-space, and passed
as a parameter to all relevant ioctls.
The initial owner and recursion count, if any, are specified when the mutex is
created.
Signed-off-by: Elizabeth Figura <zfigura@codeweavers.com>
Link: https://lore.kernel.org/r/20241213193511.457338-6-zfigura@codeweavers.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This is similar to NTSYNC_IOC_WAIT_ANY, but waits until all of the objects are
simultaneously signaled, and then acquires all of them as a single atomic
operation.
Because acquisition of multiple objects is atomic, some complex locking is
required. We cannot simply spin-lock multiple objects simultaneously, as that
may disable preëmption for a problematically long time.
Instead, modifying any object which may be involved in a wait-all operation takes
a device-wide sleeping mutex, "wait_all_lock", instead of the normal object
spinlock.
Because wait-for-all is a rare operation, in order to optimize wait-for-any,
this lock is only taken when necessary. "all_hint" is used to mark objects which
are involved in a wait-for-all operation, and if an object is not, only its
spinlock is taken.
The locking scheme used here was written by Peter Zijlstra.
Signed-off-by: Elizabeth Figura <zfigura@codeweavers.com>
Link: https://lore.kernel.org/r/20241213193511.457338-5-zfigura@codeweavers.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
