| Age | Commit message (Collapse) | Author |
|---|
|
The FMODE_NONOTIFY_* bits are a 2-bits mode. Open coding manipulation
of those bits is risky. Use an accessor file_set_fsnotify_mode() to
set the mode.
Rename file_set_fsnotify_mode() => file_set_fsnotify_mode_from_watchers()
to make way for the simple accessor name.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Link: https://lore.kernel.org/r/20250203223205.861346-2-amir73il@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The space separator was factored out from the multiple chip name prints,
but several irq_chip::irq_print_chip() callbacks still print a leading
space. Remove the superfluous double spaces.
Fixes: 9d9f204bdf7243bf ("genirq/proc: Add missing space separator back")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/893f7e9646d8933cd6786d5a1ef3eb076d263768.1738764803.git.geert+renesas@glider.be
|
|
https://gitlab.freedesktop.org/drm/i915/kernel into drm-fixes
- Fix the build error with clamp after WARN_ON on gcc 13.x+ (Guenter)
- HDCP related fixes (Suraj)
- PMU fix zero delta busyness issue (Umesh)
- Fix page cleanup on DMA remap failure (Brian)
- Drop 64bpp YUV formats from ICL+ SDR planes (Ville)
- GuC log related fix (Daniele)
- DisplayPort related fixes (Ankit, Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Z6TDHpgI6dnOc0KI@intel.com
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
UAPI Changes:
- OA uAPI related fixes (Ashutosh)
Driver Changes:
- Fix SRIOV migration initialization (Michal)
- Restore devcoredump to a sane state (Lucas)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Z6S9rI1ScT_5Aw6_@intel.com
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
A couple of fixes for ivpu to error handling, komeda for format
handling, AST DP timeout fix when enabling the output, locking fix for
zynqmp DP support, tiled format handling in drm/client, and refcounting
fix for bochs
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250206-encouraging-judicious-quoll-adc1dc@houat
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci fixes from Bjorn Helgaas:
- When saving a device's state, always save the upstream bridge's PM L1
Substates configuration as well because the bridge never saves its
own state, and restoring a device needs the state for both ends; this
was a regression that caused link and power management errors after
suspend/resume (Ilpo Järvinen)
- Correct TPH Control Register write, where we wrote the ST Mode where
the THP Requester Enable value was intended (Robin Murphy)
* tag 'pci-v6.14-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI/TPH: Restore TPH Requester Enable correctly
PCI/ASPM: Fix L1SS saving
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux
Merge amd-pstate driver fixes for 6.14-rc2 from Mario Limonciello:
"* Fix some error cleanup paths with mutex use and boost
* Fix a ref counting issue
* Fix a schedutil issue"
* tag 'amd-pstate-v6.14-2025-02-06' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux:
cpufreq/amd-pstate: Fix cpufreq_policy ref counting
cpufreq/amd-pstate: Fix max_perf updation with schedutil
cpufreq/amd-pstate: Remove the goto label in amd_pstate_update_limits
cpufreq/amd-pstate: Fix per-policy boost flag incorrect when fail
|
|
amd_pstate_update_limits() takes a cpufreq_policy reference but doesn't
decrement the refcount in one of the exit paths, fix that.
Fixes: 45722e777fd9 ("cpufreq: amd-pstate: Optimize amd_pstate_update_limits()")
Signed-off-by: Dhananjay Ugwekar <dhananjay.ugwekar@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20250205112523.201101-10-dhananjay.ugwekar@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Interestingly the recent kmemleak improvements allowed our CI to catch
a couple of percpu leaks addressed here.
We (mostly Jakub, to be accurate) are working to increase review
coverage over the net code-base tweaking the MAINTAINER entries.
Current release - regressions:
- core: harmonize tstats and dstats
- ipv6: fix dst refleaks in rpl, seg6 and ioam6 lwtunnels
- eth: tun: revert fix group permission check
- eth: stmmac: revert "specify hardware capability value when FIFO
size isn't specified"
Previous releases - regressions:
- udp: gso: do not drop small packets when PMTU reduces
- rxrpc: fix race in call state changing vs recvmsg()
- eth: ice: fix Rx data path for heavy 9k MTU traffic
- eth: vmxnet3: fix tx queue race condition with XDP
Previous releases - always broken:
- sched: pfifo_tail_enqueue: drop new packet when sch->limit == 0
- ethtool: ntuple: fix rss + ring_cookie check
- rxrpc: fix the rxrpc_connection attend queue handling
Misc:
- recognize Kuniyuki Iwashima as a maintainer"
* tag 'net-6.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (34 commits)
Revert "net: stmmac: Specify hardware capability value when FIFO size isn't specified"
MAINTAINERS: add a sample ethtool section entry
MAINTAINERS: add entry for ethtool
rxrpc: Fix race in call state changing vs recvmsg()
rxrpc: Fix call state set to not include the SERVER_SECURING state
net: sched: Fix truncation of offloaded action statistics
tun: revert fix group permission check
selftests/tc-testing: Add a test case for qdisc_tree_reduce_backlog()
netem: Update sch->q.qlen before qdisc_tree_reduce_backlog()
selftests/tc-testing: Add a test case for pfifo_head_drop qdisc when limit==0
pfifo_tail_enqueue: Drop new packet when sch->limit == 0
selftests: mptcp: connect: -f: no reconnect
net: rose: lock the socket in rose_bind()
net: atlantic: fix warning during hot unplug
rxrpc: Fix the rxrpc_connection attend queue handling
net: harmonize tstats and dstats
selftests: drv-net: rss_ctx: don't fail reconfigure test if queue offset not supported
selftests: drv-net: rss_ctx: add missing cleanup in queue reconfigure
ethtool: ntuple: fix rss + ring_cookie check
ethtool: rss: fix hiding unsupported fields in dumps
...
|
|
When we reenable TPH after changing a Steering Tag value, we need the
actual TPH Requester Enable value, not the ST Mode (which only happens to
work out by chance for non-extended TPH in interrupt vector mode).
Link: https://lore.kernel.org/r/13118098116d7bce07aa20b8c52e28c7d1847246.1738759933.git.robin.murphy@arm.com
Fixes: d2e8a34876ce ("PCI/TPH: Add Steering Tag support")
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Wei Huang <wei.huang2@amd.com>
|
|
Commit 1db806ec06b7 ("PCI/ASPM: Save parent L1SS config in
pci_save_aspm_l1ss_state()") aimed to perform L1SS config save for both the
Upstream Port and its upstream bridge when handling an Upstream Port, which
matches what the L1SS restore side does. However, parent->state_saved can
be set true at an earlier time when the upstream bridge saved other parts
of its state. Then later when attempting to save the L1SS config while
handling the Upstream Port, parent->state_saved is true in
pci_save_aspm_l1ss_state() resulting in early return and skipping saving
bridge's L1SS config because it is assumed to be already saved. Later on
restore, junk is written into L1SS config which causes issues with some
devices.
Remove parent->state_saved check and unconditionally save L1SS config also
for the upstream bridge from an Upstream Port which ought to be harmless
from correctness point of view. With the Upstream Port check now present,
saving the L1SS config more than once for the bridge is no longer a problem
(unlike when the parent->state_saved check got introduced into the fix
during its development).
Link: https://lore.kernel.org/r/20250131152913.2507-1-ilpo.jarvinen@linux.intel.com
Fixes: 1db806ec06b7 ("PCI/ASPM: Save parent L1SS config in pci_save_aspm_l1ss_state()")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219731
Reported-by: Niklāvs Koļesņikovs <pinkflames.linux@gmail.com>
Reported by: Rafael J. Wysocki <rafael@kernel.org>
Closes: https://lore.kernel.org/r/CAJZ5v0iKmynOQ5vKSQbg1J_FmavwZE-nRONovOZ0mpMVauheWg@mail.gmail.com
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Closes: https://lore.kernel.org/r/d7246feb-4f3f-4d0c-bb64-89566b170671@molgen.mpg.de
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Niklāvs Koļesņikovs <pinkflames.linux@gmail.com>
Tested-by: Paul Menzel <pmenzel@molgen.mpg.de> # Dell XPS 13 9360
|
|
specified"
This reverts commit 8865d22656b4, which caused breakage for platforms
which are not using xgmac2 or gmac4. Only these two cores have the
capability of providing the FIFO sizes from hardware capability fields
(which are provided in priv->dma_cap.[tr]x_fifo_size.)
All other cores can not, which results in these two fields containing
zero. We also have platforms that do not provide a value in
priv->plat->[tr]x_fifo_size, resulting in these also being zero.
This causes the new tests introduced by the reverted commit to fail,
and produce e.g.:
stmmaceth f0804000.eth: Can't specify Rx FIFO size
An example of such a platform which fails is QEMU's npcm750-evb.
This uses dwmac1000 which, as noted above, does not have the capability
to provide the FIFO sizes from hardware.
Therefore, revert the commit to maintain compatibility with the way
the driver used to work.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/4e98f967-f636-46fb-9eca-d383b9495b86@roeck-us.net
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Tested-by: Steven Price <steven.price@arm.com>
Fixes: 8865d22656b4 ("net: stmmac: Specify hardware capability value when FIFO size isn't specified")
Link: https://patch.msgid.link/E1tfeyR-003YGJ-Gb@rmk-PC.armlinux.org.uk
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Merge the few remaining patches stuck into drm-misc-next-fixes.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
This reverts commit 3ca459eaba1bf96a8c7878de84fa8872259a01e3.
The blamed commit caused a regression when neither tun->owner nor
tun->group is set. This is intended to be allowed, but now requires
CAP_NET_ADMIN.
Discussion in the referenced thread pointed out that the original
issue that prompted this patch can be resolved in userspace.
The relaxed access control may also make a device accessible when it
previously wasn't, while existing users may depend on it to not be.
This is a clean pure git revert, except for fixing the indentation on
the gid_valid line that checkpatch correctly flagged.
Fixes: 3ca459eaba1b ("tun: fix group permission check")
Link: https://lore.kernel.org/netdev/CAFqZXNtkCBT4f+PwyVRmQGoT3p1eVa01fCG_aNtpt6dakXncUg@mail.gmail.com/
Signed-off-by: Willem de Bruijn <willemb@google.com>
Cc: Ondrej Mosnacek <omosnace@redhat.com>
Cc: Stas Sergeev <stsp2@yandex.ru>
Link: https://patch.msgid.link/20250204161015.739430-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 088984c8d54c ("ACPI: PRM: Find EFI_MEMORY_RUNTIME block for PRM
handler and context") added unnecessary strict handler address checks,
causing the PRM module to fail in translating memory error addresses.
Both static data buffer address and ACPI parameter buffer address may
be NULL if they are not needed, as described in section 4.1.2 PRM Handler
Information Structure of Platform Runtime Mechanism specification [1].
Here are two examples from real hardware:
----PRMT.dsl----
- staic data address is not used
[10Ch 0268 2] Revision : 0000
[10Eh 0270 2] Length : 002C
[110h 0272 16] Handler GUID : F6A58D47-E04F-4F5A-86B8-2A50D4AA109B
[120h 0288 8] Handler address : 0000000065CE51F4
[128h 0296 8] Satic Data Address : 0000000000000000
[130h 0304 8] ACPI Parameter Address : 000000006522A718
- ACPI parameter address is not used
[1B0h 0432 2] Revision : 0000
[1B2h 0434 2] Length : 002C
[1B4h 0436 16] Handler GUID : 657E8AE6-A8FC-4877-BB28-42E7DE1899A5
[1C4h 0452 8] Handler address : 0000000065C567C8
[1CCh 0460 8] Satic Data Address : 000000006113FB98
[1D4h 0468 8] ACPI Parameter Address : 0000000000000000
Fixes: 088984c8d54c ("ACPI: PRM: Find EFI_MEMORY_RUNTIME block for PRM handler and context")
Reported-and-tested-by: Shi Liu <aurelianliu@tencent.com>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Aubrey Li <aubrey.li@linux.intel.com>
Link: https://uefi.org/sites/default/files/resources/Platform%20Runtime%20Mechanism%20-%20with%20legal%20notice.pdf # [1]
Reviewed-by: Koba Ko <kobak@nvidia.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://patch.msgid.link/20250126022250.3014210-1-aubrey.li@linux.intel.com
[ rjw: Minor changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The Eluktronics MECH-17 (GM7RG7N) needs IRQ overriding for the
keyboard to work.
Adding a DMI_MATCH entry for this laptop model makes the internal
keyboard function normally.
Signed-off-by: Gannon Kolding <gannon.kolding@gmail.com>
Link: https://patch.msgid.link/20250127093902.328361-1-gannon.kolding@gmail.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
While analysing code for software and OF node for the corner case when
caller asks to read zero items in the supposed to be an array of values
I found that ACPI behaves differently to what OF does, i.e.
1. It returns -EINVAL when caller asks to read zero items from integer
array, while OF returns 0, if no other errors happened.
2. It returns -EINVAL when caller asks to read zero items from string
array, while OF returns -ENODATA, if no other errors happened.
Amend ACPI implementation to follow what OF does.
Fixes: b31384fa5de3 ("Driver core: Unified device properties interface for platform firmware")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20250203194629.3731895-1-andriy.shevchenko@linux.intel.com
[ rjw: Added empty line after a conditional ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Ensure cpufreq_driver->set_boost is non-NULL before using it in
cpufreq_online() to prevent a potential NULL pointer dereference.
Reported-by: Gautam Menghani <gautam@linux.ibm.com>
Closes: https://lore.kernel.org/all/c9e56c5f54cc33338762c94e9bed7b5a0d5de812.camel@linux.ibm.com/
Fixes: dd016f379ebc ("cpufreq: Introduce a more generic way to set default per-policy boost flag")
Suggested-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Aboorva Devarajan <aboorvad@linux.ibm.com>
Link: https://patch.msgid.link/20250205181347.2079272-1-aboorvad@linux.ibm.com
[ rjw: Minor edits in the subject and changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Compile-testing without CONFIG_OF leads to a harmless build warning:
drivers/cpufreq/airoha-cpufreq.c:109:34: error: 'airoha_cpufreq_match_list' defined but not used [-Werror=unused-const-variable=]
109 | static const struct of_device_id airoha_cpufreq_match_list[] __initconst = {
| ^~~~~~~~~~~~~~~~~~~~~~~~~
It would be possible to mark the variable as __maybe_unused to shut up
that warning, but a Kconfig dependency seems more appropriate as this still
allows build testing in allmodconfig and randconfig builds on all
architectures.
An earlier commit, b865a8404642 ("cpufreq: airoha: Depends on OF"),
tried to fix it incorrectly. ARCH_AIROHA already requires CONFIG_OF, so
this change does nothing, and the dependency is still missing for the
COMPILE_TEST case.
Fix it properly.
Fixes: 84cf9e541ccc ("cpufreq: airoha: Add EN7581 CPUFreq SMCCC driver")
Fixes: b865a8404642 ("cpufreq: airoha: Depends on OF")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
[ Viresh: updated commit log and fixed rebase conflict ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://patch.msgid.link/9d51d2710061dfa7f2568287c6ed125b858b7318.1738580005.git.viresh.kumar@linaro.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Passing 0 as the step only works when there are other reasons to break
out of the BPP loop in intel_dp_mtp_tu_compute_config(). Otherwise, an
infinite loop might occur. Fix it by explicitly checking for 0 step.
Fixes: ef0a0757bbea ("drm/i915/dp: compute config for 128b/132b SST w/o DSC")
Reported-by: Imre Deak <imre.deak@intel.com>
Closes: https://lore.kernel.org/r/Z6I0knh2Kt5T0JrT@ideak-desk.fi.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250204154925.3001781-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit a40e718d34d3d02c781c295466b013415f68c4f1)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
In adjust_perf() callback, we are setting the max_perf to highest_perf,
as opposed to the correct limit value i.e. max_limit_perf. Fix that.
Fixes: 3f7b835fa4d0 ("cpufreq/amd-pstate: Move limit updating code")
Signed-off-by: Dhananjay Ugwekar <dhananjay.ugwekar@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20250205112523.201101-3-dhananjay.ugwekar@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
|
|
Scope based guard/cleanup macros should not be used together with goto
labels. Hence, remove the goto label.
Fixes: 6c093d5a5b73 ("cpufreq/amd-pstate: convert mutex use to guard()")
Signed-off-by: Dhananjay Ugwekar <dhananjay.ugwekar@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20250205112523.201101-2-dhananjay.ugwekar@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
|
|
While the Aeroflex Gaisler GRGPIO driver has no build-time dependency on
gpiolib-of, it supports only DT-based configuration, and is used only on
DT systems. Hence add a dependency on OF, to prevent asking the user
about this driver when configuring a kernel without DT support.
Fixes: bc40668def384256 ("gpio: grgpio: drop Kconfig dependency on OF_GPIO")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Andreas Larsson <andreas@gaisler.com>
Link: https://lore.kernel.org/r/db6da3d11bf850d89f199e5c740d8f133e38078d.1738760539.git.geert+renesas@glider.be
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Depending on the user config, the leaf entry may be the hog directory,
not line. Check it and lock the correct item.
Fixes: 8bd76b3d3f3a ("gpio: sim: lock up configfs that an instantiated device depends on")
Tested-by: Koichiro Den <koichiro.den@canonical.com>
Link: https://lore.kernel.org/r/20250203110123.87701-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
This reverts commit 56a50667cbcfaf95eea9128d5676af94e54b51a8. Mux
handling is not sufficiently implemented. It needs more time.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
clients"
This reverts commit 3cfe39b3a845593a485ab1c716615979004ef9f6. Mux
handling is not sufficiently implemented. It needs more time.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
This reverts commit
a2b5a9956269 ("drm/amd/display: Use HW lock mgr for PSR1")
Because it may cause system hang while connect with two edp panel.
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Currently, there are several files in drm/amd/display that aim to have a
higher -Wframe-larger-than value to avoid instances of that warning with
a lower value from the user's configuration. However, with the way that
it is currently implemented, it does not respect the user's request via
CONFIG_FRAME_WARN for a higher stack frame limit, which can cause pain
when new instances of the warning appear and break the build due to
CONFIG_WERROR.
Adjust the logic to switch from a hard coded -Wframe-larger-than value
to only using the value as a minimum clamp and deferring to the
requested value from CONFIG_FRAME_WARN if it is higher.
Suggested-by: Harry Wentland <harry.wentland@amd.com>
Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Closes: https://lore.kernel.org/2025013003-audience-opposing-7f95@gregkh/
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Firmware deinitialization performs MMIO accesses which are not
necessary if the device has already been removed. In some cases,
these accesses happen via readx_poll_timeout_atomic which ends up
timing out, resulting in a warning at hw_atl2_utils_fw.c:112:
[ 104.595913] Call Trace:
[ 104.595915] <TASK>
[ 104.595918] ? show_regs+0x6c/0x80
[ 104.595923] ? __warn+0x8d/0x150
[ 104.595925] ? aq_a2_fw_deinit+0xcf/0xe0 [atlantic]
[ 104.595934] ? report_bug+0x182/0x1b0
[ 104.595938] ? handle_bug+0x6e/0xb0
[ 104.595940] ? exc_invalid_op+0x18/0x80
[ 104.595942] ? asm_exc_invalid_op+0x1b/0x20
[ 104.595944] ? aq_a2_fw_deinit+0xcf/0xe0 [atlantic]
[ 104.595952] ? aq_a2_fw_deinit+0xcf/0xe0 [atlantic]
[ 104.595959] aq_nic_deinit.part.0+0xbd/0xf0 [atlantic]
[ 104.595964] aq_nic_deinit+0x17/0x30 [atlantic]
[ 104.595970] aq_ndev_close+0x2b/0x40 [atlantic]
[ 104.595975] __dev_close_many+0xad/0x160
[ 104.595978] dev_close_many+0x99/0x170
[ 104.595979] unregister_netdevice_many_notify+0x18b/0xb20
[ 104.595981] ? __call_rcu_common+0xcd/0x700
[ 104.595984] unregister_netdevice_queue+0xc6/0x110
[ 104.595986] unregister_netdev+0x1c/0x30
[ 104.595988] aq_pci_remove+0xb1/0xc0 [atlantic]
Fix this by skipping firmware deinitialization altogether if the
PCI device is no longer present.
Tested with an AQC113 attached via Thunderbolt by performing
repeated unplug cycles while traffic was running via iperf.
Fixes: 97bde5c4f909 ("net: ethernet: aquantia: Support for NIC-specific code")
Signed-off-by: Jacob Moroni <mail@jakemoroni.com>
Reviewed-by: Igor Russkikh <irusskikh@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250203143604.24930-3-mail@jakemoroni.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The GPIO drivers with latch interrupt support (typically types starting
with PCAL) have interrupt status registers to determine which particular
inputs have caused an interrupt. Unfortunately there is no atomic
operation to read these registers and clear the interrupt. Clearing the
interrupt is done by reading the input registers.
The code was reading the interrupt status registers, and then reading
the input registers. If an input changed between these two events it was
lost.
The solution in this patch is to revert to the non-latch version of
code, i.e. remembering the previous input status, and looking for the
changes. This system results in no more I2C transfers, so is no slower.
The latch property of the device still means interrupts will still be
noticed if the input changes back to its initial state.
Fixes: 44896beae605 ("gpio: pca953x: add PCAL9535 interrupt support for Galileo Gen2")
Signed-off-by: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240606033102.2271916-1-mark.tomlinson@alliedtelesis.co.nz
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Initramfs building tools such as dracut will look for a MODULE_FIRMWARE()
declaration to determine which firmware to include in the initramfs
when a driver is included in the initramfs.
As amdxdna doesn't declare any firmware this causes the driver to fail
to load with -ENOENT when in the initramfs. Add the missing declaration
for possible firmware.
Reported-by: Renjith Pananchikkal <Renjith.Pananchikkal@amd.com>
Suggested-by: Alexander Deucher <Alexander.Deucher@amd.com>
Fixes: 8c9ff1b181ba ("accel/amdxdna: Add a new driver for AMD AI Engine")
Reviewed-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://lore.kernel.org/r/20250204174031.3425762-1-superm1@kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250204174031.3425762-1-superm1@kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Ilpo Järvinen:
- ideapad-laptop: Pass a correct pointer to the driver data
- intel/ifs: Provide a link to the IFS test images
- intel/pmc: Use large enough type when decoding LTR value
* tag 'platform-drivers-x86-v6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86/intel/ifs: Update documentation with image download path
platform/x86/intel: pmc: fix ltr decode in pmc_core_ltr_show()
platform/x86: ideapad-laptop: pass a correct pointer to the driver data
|
|
Commit 1c56e9a39833 ("drm/i915/dp: Get optimal link config to have best
compressed bpp") tries to find the best compressed bpp for the
link. However, it iterates from max to min bpp on display 13+, and from
min to max on other platforms. This presumably leads to minimum
compressed bpp always being chosen on display 11-12.
Iterate from high to low on all platforms to actually use the best
possible compressed bpp.
Fixes: 1c56e9a39833 ("drm/i915/dp: Get optimal link config to have best compressed bpp")
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: <stable@vger.kernel.org> # v6.7+
Reviewed-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3bba67923cbcd13a59d26ef5fa4bb042b13c8a9b.1738327620.git.jani.nikula@intel.com
(cherry picked from commit 56b0337d429356c3b9ecc36a03023c8cc856b196)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
The documentation previously listed the path to download In Field Scan
(IFS) test images as "TBD".
Update the documentation to include the correct image download
location. Also move the download link to the appropriate section within
the documentation.
Reported-by: Anisse Astier <anisse@astier.eu>
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Link: https://lore.kernel.org/r/20250131205315.1585663-1-jithu.joseph@intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
A null dereference or oops exception will eventually occur when qla1280.c
driver is compiled with DEBUG_QLA1280 enabled and ql_debug_level > 2. I
think its clear from the code that the intention here is sg_dma_len(s) not
length of sg_next(s) when printing the debug info.
Signed-off-by: Magnus Lindholm <linmag7@gmail.com>
Link: https://lore.kernel.org/r/20250125095033.26188-1-linmag7@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
There is currently no mechanism to return error from query responses.
Return the error and print the corresponding error message with it.
Signed-off-by: Seunghui Lee <sh043.lee@samsung.com>
Link: https://lore.kernel.org/r/20250118023808.24726-1-sh043.lee@samsung.com
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
In StorVSC, payload->range.len is used to indicate if this SCSI command
carries payload. This data is allocated as part of the private driver data
by the upper layer and may get passed to lower driver uninitialized.
For example, the SCSI error handling mid layer may send TEST_UNIT_READY or
REQUEST_SENSE while reusing the buffer from a failed command. The private
data section may have stale data from the previous command.
If the SCSI command doesn't carry payload, the driver may use this value as
is for communicating with host, resulting in possible corruption.
Fix this by always initializing this value.
Fixes: be0cf6ca301c ("scsi: storvsc: Set the tablesize based on the information given by the host")
Cc: stable@kernel.org
Tested-by: Roman Kisel <romank@linux.microsoft.com>
Reviewed-by: Roman Kisel <romank@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Long Li <longli@microsoft.com>
Link: https://lore.kernel.org/r/1737601642-7759-1-git-send-email-longli@linuxonhyperv.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
devm_blk_crypto_profile_init() registers a cleanup handler to run when
the associated (platform-) device is being released. For UFS, the
crypto private data and pointers are stored as part of the ufs_hba's
data structure 'struct ufs_hba::crypto_profile'. This structure is
allocated as part of the underlying ufshcd and therefore Scsi_host
allocation.
During driver release or during error handling in ufshcd_pltfrm_init(),
this structure is released as part of ufshcd_dealloc_host() before the
(platform-) device associated with the crypto call above is released.
Once this device is released, the crypto cleanup code will run, using
the just-released 'struct ufs_hba::crypto_profile'. This causes a
use-after-free situation:
Call trace:
kfree+0x60/0x2d8 (P)
kvfree+0x44/0x60
blk_crypto_profile_destroy_callback+0x28/0x70
devm_action_release+0x1c/0x30
release_nodes+0x6c/0x108
devres_release_all+0x98/0x100
device_unbind_cleanup+0x20/0x70
really_probe+0x218/0x2d0
In other words, the initialisation code flow is:
platform-device probe
ufshcd_pltfrm_init()
ufshcd_alloc_host()
scsi_host_alloc()
allocation of struct ufs_hba
creation of scsi-host devices
devm_blk_crypto_profile_init()
devm registration of cleanup handler using platform-device
and during error handling of ufshcd_pltfrm_init() or during driver
removal:
ufshcd_dealloc_host()
scsi_host_put()
put_device(scsi-host)
release of struct ufs_hba
put_device(platform-device)
crypto cleanup handler
To fix this use-after free, change ufshcd_alloc_host() to register a
devres action to automatically cleanup the underlying SCSI device on
ufshcd destruction, without requiring explicit calls to
ufshcd_dealloc_host(). This way:
* the crypto profile and all other ufs_hba-owned resources are
destroyed before SCSI (as they've been registered after)
* a memleak is plugged in tc-dwc-g210-pci.c remove() as a
side-effect
* EXPORT_SYMBOL_GPL(ufshcd_dealloc_host) can be removed fully as
it's not needed anymore
* no future drivers using ufshcd_alloc_host() could ever forget
adding the cleanup
Fixes: cb77cb5abe1f ("blk-crypto: rename blk_keyslot_manager to blk_crypto_profile")
Fixes: d76d9d7d1009 ("scsi: ufs: use devm_blk_ksm_init()")
Cc: stable@vger.kernel.org
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250124-ufshcd-fix-v4-1-c5d0144aae59@linaro.org
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Fail I/Os instead of retry to prevent user space processes from being
blocked on the I/O completion for several minutes.
Retrying I/Os during "depopulation in progress" or "depopulation restore in
progress" results in a continuous retry loop until the depopulation
completes or until the I/O retry loop is aborted due to a timeout by the
scsi_cmd_runtime_exceeced().
Depopulation is slow and can take 24+ hours to complete on 20+ TB HDDs.
Most I/Os in the depopulation retry loop end up taking several minutes
before returning the failure to user space.
Cc: stable@vger.kernel.org # 4.18.x: 2bbeb8d scsi: core: Handle depopulation and restoration in progress
Cc: stable@vger.kernel.org # 4.18.x
Fixes: e37c7d9a0341 ("scsi: core: sanitize++ in progress")
Signed-off-by: Igor Pylypiv <ipylypiv@google.com>
Link: https://lore.kernel.org/r/20250131184408.859579-1-ipylypiv@google.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Filesystems can write to disk from page reclaim with __GFP_FS
set. Marc found a case where scsi_realloc_sdev_budget_map() ends up in
page reclaim with GFP_KERNEL, where it could try to take filesystem
locks again, leading to a deadlock.
WARNING: possible circular locking dependency detected
6.13.0 #1 Not tainted
------------------------------------------------------
kswapd0/70 is trying to acquire lock:
ffff8881025d5d78 (&q->q_usage_counter(io)){++++}-{0:0}, at: blk_mq_submit_bio+0x461/0x6e0
but task is already holding lock:
ffffffff81ef5f40 (fs_reclaim){+.+.}-{0:0}, at: balance_pgdat+0x9f/0x760
The full lockdep splat can be found in Marc's report:
https://lkml.org/lkml/2025/1/24/1101
Avoid the potential deadlock by doing the allocation with GFP_NOIO, which
prevents both filesystem and block layer recursion.
Reported-by: Marc Aurèle La France <tsi@tuyoix.net>
Signed-off-by: Rik van Riel <riel@surriel.com>
Link: https://lore.kernel.org/r/20250129104525.0ae8421e@fangorn
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
This commit addresses an issue where clk_gating.state is being toggled in
ufshcd_setup_clocks() even if clock gating is not allowed.
The fix is to add a check for hba->clk_gating.is_initialized before toggling
clk_gating.state in ufshcd_setup_clocks().
Since clk_gating.lock is now initialized unconditionally, it can no longer
lead to the spinlock being used before it is properly initialized, but
instead it is mostly for documentation purposes.
Fixes: 1ab27c9cf8b6 ("ufs: Add support for clock gating")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Link: https://lore.kernel.org/r/20250128071207.75494-3-avri.altman@wdc.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Address a lockdep warning triggered by the use of the clk_gating.lock before
it is properly initialized. The warning is as follows:
[ 4.388838] INFO: trying to register non-static key.
[ 4.395673] The code is fine but needs lockdep annotation, or maybe
[ 4.402118] you didn't initialize this object before use?
[ 4.407673] turning off the locking correctness validator.
[ 4.413334] CPU: 5 UID: 0 PID: 58 Comm: kworker/u32:1 Not tainted 6.12-rc1 #185
[ 4.413343] Hardware name: Qualcomm Technologies, Inc. Robotics RB5 (DT)
[ 4.413362] Call trace:
[ 4.413364] show_stack+0x18/0x24 (C)
[ 4.413374] dump_stack_lvl+0x90/0xd0
[ 4.413384] dump_stack+0x18/0x24
[ 4.413392] register_lock_class+0x498/0x4a8
[ 4.413400] __lock_acquire+0xb4/0x1b90
[ 4.413406] lock_acquire+0x114/0x310
[ 4.413413] _raw_spin_lock_irqsave+0x60/0x88
[ 4.413423] ufshcd_setup_clocks+0x2c0/0x490
[ 4.413433] ufshcd_init+0x198/0x10ec
[ 4.413437] ufshcd_pltfrm_init+0x600/0x7c0
[ 4.413444] ufs_qcom_probe+0x20/0x58
[ 4.413449] platform_probe+0x68/0xd8
[ 4.413459] really_probe+0xbc/0x268
[ 4.413466] __driver_probe_device+0x78/0x12c
[ 4.413473] driver_probe_device+0x40/0x11c
[ 4.413481] __device_attach_driver+0xb8/0xf8
[ 4.413489] bus_for_each_drv+0x84/0xe4
[ 4.413495] __device_attach+0xfc/0x18c
[ 4.413502] device_initial_probe+0x14/0x20
[ 4.413510] bus_probe_device+0xb0/0xb4
[ 4.413517] deferred_probe_work_func+0x8c/0xc8
[ 4.413524] process_scheduled_works+0x250/0x658
[ 4.413534] worker_thread+0x15c/0x2c8
[ 4.413542] kthread+0x134/0x200
[ 4.413550] ret_from_fork+0x10/0x20
To fix this issue, ensure that the spinlock is only used after it has been
properly initialized before using it in ufshcd_setup_clocks(). Do that
unconditionally as initializing a spinlock is a fast operation.
Fixes: 209f4e43b806 ("scsi: ufs: core: Introduce a new clock_gating lock")
Reported-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Link: https://lore.kernel.org/r/20250128071207.75494-2-avri.altman@wdc.com
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Pull outstanding fixes bound for this release into 6.14/scsi-fixes.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
ice: fix Rx data path for heavy 9k MTU traffic
Maciej Fijalkowski says:
This patchset fixes a pretty nasty issue that was reported by RedHat
folks which occurred after ~30 minutes (this value varied, just trying
here to state that it was not observed immediately but rather after a
considerable longer amount of time) when ice driver was tortured with
jumbo frames via mix of iperf traffic executed simultaneously with
wrk/nginx on client/server sides (HTTP and TCP workloads basically).
The reported splats were spanning across all the bad things that can
happen to the state of page - refcount underflow, use-after-free, etc.
One of these looked as follows:
[ 2084.019891] BUG: Bad page state in process swapper/34 pfn:97fcd0
[ 2084.025990] page:00000000a60ee772 refcount:-1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x97fcd0
[ 2084.035462] flags: 0x17ffffc0000000(node=0|zone=2|lastcpupid=0x1fffff)
[ 2084.041990] raw: 0017ffffc0000000 dead000000000100 dead000000000122 0000000000000000
[ 2084.049730] raw: 0000000000000000 0000000000000000 ffffffffffffffff 0000000000000000
[ 2084.057468] page dumped because: nonzero _refcount
[ 2084.062260] Modules linked in: bonding tls sunrpc intel_rapl_msr intel_rapl_common intel_uncore_frequency intel_uncore_frequency_common i10nm_edac nfit libnvdimm x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm mgag200 irqd
[ 2084.137829] CPU: 34 PID: 0 Comm: swapper/34 Kdump: loaded Not tainted 5.14.0-427.37.1.el9_4.x86_64 #1
[ 2084.147039] Hardware name: Dell Inc. PowerEdge R750/0216NK, BIOS 1.13.2 12/19/2023
[ 2084.154604] Call Trace:
[ 2084.157058] <IRQ>
[ 2084.159080] dump_stack_lvl+0x34/0x48
[ 2084.162752] bad_page.cold+0x63/0x94
[ 2084.166333] check_new_pages+0xb3/0xe0
[ 2084.170083] rmqueue_bulk+0x2d2/0x9e0
[ 2084.173749] ? ktime_get+0x35/0xa0
[ 2084.177159] rmqueue_pcplist+0x13b/0x210
[ 2084.181081] rmqueue+0x7d3/0xd40
[ 2084.184316] ? xas_load+0x9/0xa0
[ 2084.187547] ? xas_find+0x183/0x1d0
[ 2084.191041] ? xa_find_after+0xd0/0x130
[ 2084.194879] ? intel_iommu_iotlb_sync_map+0x89/0xe0
[ 2084.199759] get_page_from_freelist+0x11f/0x530
[ 2084.204291] __alloc_pages+0xf2/0x250
[ 2084.207958] ice_alloc_rx_bufs+0xcc/0x1c0 [ice]
[ 2084.212543] ice_clean_rx_irq+0x631/0xa20 [ice]
[ 2084.217111] ice_napi_poll+0xdf/0x2a0 [ice]
[ 2084.221330] __napi_poll+0x27/0x170
[ 2084.224824] net_rx_action+0x233/0x2f0
[ 2084.228575] __do_softirq+0xc7/0x2ac
[ 2084.232155] __irq_exit_rcu+0xa1/0xc0
[ 2084.235821] common_interrupt+0x80/0xa0
[ 2084.239662] </IRQ>
[ 2084.241768] <TASK>
The fix is mostly about reverting what was done in commit 1dc1a7e7f410
("ice: Centrallize Rx buffer recycling") followed by proper timing on
page_count() storage and then removing the ice_rx_buf::act related logic
(which was mostly introduced for purposes from cited commit).
Special thanks to Xu Du for providing reproducer and Jacob Keller for
initial extensive analysis.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
ice: stop storing XDP verdict within ice_rx_buf
ice: gather page_count()'s of each frag right before XDP prog call
ice: put Rx buffers after being done with current frame
====================
Link: https://patch.msgid.link/20250131185415.3741532-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 70fb86a85dc9 ("drm/xe: Revert some changes that break a mesa
debug tool") partially reverted some changes to workaround breakage
caused to mesa tools. However, in doing so it also broke fetching the
GuC log via debugfs since xe_print_blob_ascii85() simply bails out.
The fix is to avoid the extra newlines: the devcoredump interface is
line-oriented and adding random newlines in the middle breaks it. If a
tool is able to parse it by looking at the data and checking for chars
that are out of the ascii85 space, it can still do so. A format change
that breaks the line-oriented output on devcoredump however needs better
coordination with existing tools.
v2: Add suffix description comment
v3: Reword explanation of xe_print_blob_ascii85() calling drm_puts()
in a loop
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Julia Filipchuk <julia.filipchuk@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: stable@vger.kernel.org
Fixes: 70fb86a85dc9 ("drm/xe: Revert some changes that break a mesa debug tool")
Fixes: ec1455ce7e35 ("drm/xe/devcoredump: Add ASCII85 dump helper function")
Link: https://patchwork.freedesktop.org/patch/msgid/20250123202307.95103-2-jose.souza@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 2c95bbf5002776117a69caed3b31c10bf7341bec)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Having the exec queue snapshot inside a "GuC CT" section was always
wrong. Commit c28fd6c358db ("drm/xe/devcoredump: Improve section
headings and add tile info") tried to fix that bug, but with that also
broke the mesa tool that parses the devcoredump, hence it was reverted
in commit a53da2fb25a3 ("drm/xe: Revert some changes that break a mesa
debug tool").
With the mesa tool also fixed, this can propagate as a fix on both
kernel and userspace side to avoid unnecessary headache for a debug
feature.
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Julia Filipchuk <julia.filipchuk@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: stable@vger.kernel.org
Fixes: a53da2fb25a3 ("drm/xe: Revert some changes that break a mesa debug tool")
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250123051112.1938193-2-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit a37934ea75d331fafa7fe80b6180642ba5193422)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
We rely on stream->pollin to decide whether or not to block during
poll/read calls. However, currently there are blocking read code paths
which don't even set stream->pollin. The best place to consistently set
stream->pollin for all code paths is therefore to set it in
xe_oa_buffer_check_unlocked.
Fixes: e936f885f1e9 ("drm/xe/oa/uapi: Expose OA stream fd")
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250115222029.3002103-1-ashutosh.dixit@intel.com
(cherry picked from commit d3fedff828bb7e4a422c42caeafd5d974e24ee43)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
The migration support only needs to be initialized once, but it
was incorrectly called from the xe_gt_sriov_pf_init_hw(), which
is part of the reset flow and may be called multiple times.
Fixes: d86e3737c7ab ("drm/xe/pf: Add functions to save and restore VF GuC state")
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250120232443.544-1-michal.wajdeczko@intel.com
(cherry picked from commit 9ebb5846e1a3b1705f8a7cbc528888a1aa0b163e)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
UMD's have interest in setting unused bits of the oa_ctrl register "out of
band" for certain experiments. To facilitate this, don't clobber previous
oa_ctrl unused bits, i.e. rmw the values rather than simply write them.
Fixes: e936f885f1e9 ("drm/xe/oa/uapi: Expose OA stream fd")
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250117032155.3048063-1-ashutosh.dixit@intel.com
(cherry picked from commit cfa9d40db8c30d894171010fe765d96e9bc6a47e)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
[WHY]
When the system powers up eDP with external monitors in seamless boot
sequence, stutter get enabled before TTU and HUBP registers being
programmed, which resulting in underflow.
[HOW]
Enable TTU in hubp_init.
Change the sequence that do not perpare_bandwidth and optimize_bandwidth
while having seamless boot streams.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Lo-an Chen <lo-an.chen@amd.com>
Signed-off-by: Paul Hsieh <paul.hsieh@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
