summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2024-05-10serial: sh-sci: simplify locking when re-issuing RXDMA failsWolfram Sang
Avoid a superfluous unlock/lock-pair by simply moving the printout to the end of bailing out. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20240506114016.30498-10-wsa+renesas@sang-engineering.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-10serial: sh-sci: let timeout timer only run when DMA is scheduledWolfram Sang
The hrtimer for RXDMA timeout was unconditionally restarted in the RXDMA complete handler ignoring the fact that setting up DMA may fail and PIO is used instead. Explicitly stop the timer when DMA is completed and only restart it when setting up DMA was successful. This makes the intention of the timer much clearer, the driver easier to understand and simplifies assumptions about the timer. The latter avoids race conditions if these assumptions were not met or confused. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20240506114016.30498-9-wsa+renesas@sang-engineering.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-10serial: sh-sci: describe locking requirements for invalidating RXDMAWolfram Sang
Make sure everyone knows that calling this function needs protection. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20240506114016.30498-8-wsa+renesas@sang-engineering.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-10serial: sh-sci: protect invalidating RXDMA on shutdownWolfram Sang
The to-be-fixed commit removed locking when invalidating the DMA RX descriptors on shutdown. It overlooked that there is still a rx_timer running which may still access the protected data. So, re-add the locking. Reported-by: Dirk Behme <dirk.behme@de.bosch.com> Closes: https://lore.kernel.org/r/ee6c9e16-9f29-450e-81da-4a8dceaa8fc7@de.bosch.com Fixes: 2c4ee23530ff ("serial: sh-sci: Postpone DMA release when falling back to PIO") Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20240506114016.30498-7-wsa+renesas@sang-engineering.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-10usb: typec: tipd: rely on i2c_get_match_data()Javier Carrasco
The first thing i2c_get_match_data() does is calling device_get_match_data(), which already checks if there is a fwnode. Remove explicit usage of device_get_match_data() as it is already included in i2c_get_match_data(). Signed-off-by: Javier Carrasco <javier.carrasco@wolfvision.net> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20240429-tps6598x_fix_event_handling-v3-3-4e8e58dce489@wolfvision.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-10usb: typec: tipd: fix event checking for tps6598xJavier Carrasco
The current interrupt service routine of the tps6598x only reads the first 64 bits of the INT_EVENT1 and INT_EVENT2 registers, which means that any event above that range will be ignored, leaving interrupts unattended. Moreover, those events will not be cleared, and the device will keep the interrupt enabled. This issue has been observed while attempting to load patches, and the 'ReadyForPatch' field (bit 81) of INT_EVENT1 was set. Given that older versions of the tps6598x (1, 2 and 6) provide 8-byte registers, a mechanism based on the upper byte of the version register (0x0F) has been included. The manufacturer has confirmed [1] that this byte is always 0 for older versions, and either 0xF7 (DH parts) or 0xF9 (DK parts) is returned in newer versions (7 and 8). Read the complete INT_EVENT registers to handle all interrupts generated by the device and account for the hardware version to select the register size. Link: https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/1346521/tps65987d-register-command-to-distinguish-between-tps6591-2-6-and-tps65987-8 [1] Fixes: 0a4c005bd171 ("usb: typec: driver for TI TPS6598x USB Power Delivery controllers") Cc: stable@vger.kernel.org Signed-off-by: Javier Carrasco <javier.carrasco@wolfvision.net> Link: https://lore.kernel.org/r/20240429-tps6598x_fix_event_handling-v3-2-4e8e58dce489@wolfvision.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-10usb: typec: tipd: fix event checking for tps25750Javier Carrasco
In its current form, the interrupt service routine of the tps25750 checks the event flags in the lowest 64 bits of the interrupt event register (event[0]), but also in the upper part (event[1]). Given that all flags are defined as BIT() or BIT_ULL(), they are restricted to the first 64 bits of the INT_EVENT1 register. Including the upper part of the register can lead to false positives e.g. if the event 64 bits above the one being checked is set, but the one being checked is not. Restrict the flag checking to the first 64 bits of the INT_EVENT1 register. Fixes: 7e7a3c815d22 ("USB: typec: tps6598x: Add TPS25750 support") Cc: stable@vger.kernel.org Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Javier Carrasco <javier.carrasco@wolfvision.net> Link: https://lore.kernel.org/r/20240429-tps6598x_fix_event_handling-v3-1-4e8e58dce489@wolfvision.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-10usb: fotg210: Use *-y instead of *-objs in MakefileAndy Shevchenko
*-objs suffix is reserved rather for (user-space) host programs while usually *-y suffix is used for kernel drivers (although *-objs works for that purpose for now). Let's correct the old usages of *-objs in Makefiles. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20240508150406.1378672-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-10usb: typec: ucsi: displayport: Fix potential deadlockHeikki Krogerus
The function ucsi_displayport_work() does not access the connector, so it also must not acquire the connector lock. This fixes a potential deadlock scenario: ucsi_displayport_work() -> lock(&con->lock) typec_altmode_vdm() dp_altmode_vdm() dp_altmode_work() typec_altmode_enter() ucsi_displayport_enter() -> lock(&con->lock) Reported-by: Mathias Nyman <mathias.nyman@linux.intel.com> Fixes: af8622f6a585 ("usb: typec: ucsi: Support for DisplayPort alt mode") Cc: stable@vger.kernel.org Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20240507134316.161999-1-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-10usb: typec: qcom-pmic-typec: split HPD bridge alloc and registrationDmitry Baryshkov
If a probe function returns -EPROBE_DEFER after creating another device there is a change of ending up in a probe deferral loop, (see commit fbc35b45f9f6 ("Add documentation on meaning of -EPROBE_DEFER"). In case of the qcom-pmic-typec driver the tcpm_register_port() function looks up external resources (USB role switch and inherently via called typec_register_port() USB-C muxes, switches and retimers). In order to prevent such probe-defer loops caused by qcom-pmic-typec driver, use the API added by Johan Hovold and move HPD bridge registration to the end of the probe function. The devm_drm_dp_hpd_bridge_add() is called at the end of the probe function after all TCPM start functions. This is done as a way to overcome a different problem, the DRM subsystem can not properly cope with the DRM bridges being destroyed once the bridge is attached. Having this function call at the end of the probe function prevents possible DRM bridge device creation followed by destruction in case one of the TCPM start functions returns an error. Reported-by: Caleb Connolly <caleb.connolly@linaro.org> Acked-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20240424-qc-pmic-typec-hpd-split-v4-1-f7e10d147443@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-10usb: musc: Remove unused list 'buffers'Dr. David Alan Gilbert
Remove the unused list head 'buffers' and the 'struct free_record' which is also unused below it. To me it looks like this has always been unused, but I've not dug into why. Build test only. Signed-off-by: "Dr. David Alan Gilbert" <linux@treblig.org> Link: https://lore.kernel.org/r/20240504150315.77598-1-linux@treblig.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-10usb: dwc3: Wait unconditionally after issuing EndXfer commandPrashanth K
Currently all controller IP/revisions except DWC3_usb3 >= 310a wait 1ms unconditionally for ENDXFER completion when IOC is not set. This is because DWC_usb3 controller revisions >= 3.10a supports GUCTL2[14: Rst_actbitlater] bit which allows polling CMDACT bit to know whether ENDXFER command is completed. Consider a case where an IN request was queued, and parallelly soft_disconnect was called (due to ffs_epfile_release). This eventually calls stop_active_transfer with IOC cleared, hence send_gadget_ep_cmd() skips waiting for CMDACT cleared during EndXfer. For DWC3 controllers with revisions >= 310a, we don't forcefully wait for 1ms either, and we proceed by unmapping the requests. If ENDXFER didn't complete by this time, it leads to SMMU faults since the controller would still be accessing those requests. Fix this by ensuring ENDXFER completion by adding 1ms delay in __dwc3_stop_active_transfer() unconditionally. Cc: stable@vger.kernel.org Fixes: b353eb6dc285 ("usb: dwc3: gadget: Skip waiting for CMDACT cleared during endxfer") Signed-off-by: Prashanth K <quic_prashk@quicinc.com> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/20240502044103.1066350-1-quic_prashk@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-10Merge tag 'thunderbolt-for-v6.10-rc1' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-next Mika writes: thunderbolt: Changes for v6.10 merge window This includes following USB4/Thunderbolt changes for the v6.10 merge window: - Enable NVM firmare upgrade on Intel Maple Ridge Thunderbolt 4 controller - Improve USB3 tunnel bandwidth calculation - Improve sideband access - Minor cleanups and fixes. All these have been in linux-next with no reported issues. * tag 'thunderbolt-for-v6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt: thunderbolt: Correct trace output of firmware connection manager packets thunderbolt: Fix kernel-doc for tb_tunnel_alloc_dp() thunderbolt: Fix uninitialized variable in tb_tunnel_alloc_usb3() thunderbolt: There are only 5 basic router registers in pre-USB4 routers thunderbolt: No need to loop over all retimers if access fails thunderbolt: Increase sideband access polling delay thunderbolt: Get rid of TB_CFG_PKG_PREPARE_TO_SLEEP thunderbolt: Use correct error code with ERROR_NOT_SUPPORTED thunderbolt: Allow USB3 bandwidth to be lower than maximum supported thunderbolt: Fix calculation of consumed USB3 bandwidth on a path thunderbolt: Enable NVM upgrade support on Intel Maple Ridge
2024-05-10Revert "media: v4l2-ctrls: show all owned controls in log_status"Hans Verkuil
This reverts commit 9801b5b28c6929139d6fceeee8d739cc67bb2739. This patch introduced a potential deadlock scenario: [Wed May 8 10:02:06 2024] Possible unsafe locking scenario: [Wed May 8 10:02:06 2024] CPU0 CPU1 [Wed May 8 10:02:06 2024] ---- ---- [Wed May 8 10:02:06 2024] lock(vivid_ctrls:1620:(hdl_vid_cap)->_lock); [Wed May 8 10:02:06 2024] lock(vivid_ctrls:1608:(hdl_user_vid)->_lock); [Wed May 8 10:02:06 2024] lock(vivid_ctrls:1620:(hdl_vid_cap)->_lock); [Wed May 8 10:02:06 2024] lock(vivid_ctrls:1608:(hdl_user_vid)->_lock); For now just revert. Fixes: 9801b5b28c69 ("media: v4l2-ctrls: show all owned controls in log_status") Cc: stable@vger.kernel.org Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2024-05-10media: ov2740: Ensure proper reset sequence on probe()Hans de Goede
Before this commit on probe() the driver would do: reset=1 // from probe() calling gpiod_get(GPIOD_OUT_HIGH) reset=0 // from resume() msleep(20) // from resume() So if reset was 0 before getting the GPIO the reset line would only be driven high for a very short time and sometimes there would be errors reading the id register afterwards. Add a msleep(20) after getting the reset line to ensure the sensor is properly reset: reset=1 // from probe() calling gpiod_get(GPIOD_OUT_HIGH) msleep(20) // from probe() reset=0 // from resume() msleep(20) // from resume() Signed-off-by: Hans de Goede <hdegoede@redhat.com> Tested-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2024-05-10media: intel/ipu6: Don't print user-triggerable errors to kernel logSakari Ailus
Use dev_dbg() for printing messages on user-triggerable conditions that have no relation to driver or hardware issues. Fixes: 3c1dfb5a69cf ("media: intel/ipu6: input system video nodes and buffer queues") Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Bingbu Cao <bingbu.cao@intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2024-05-10crypto: atmel-sha204a - provide the otp contentLothar Rubusch
Set up sysfs for the Atmel SHA204a. Provide the content of the otp zone as an attribute field on the sysfs entry. Thereby make sure that if the chip is locked, not connected or trouble with the i2c bus, the sysfs device is not set up. This is mostly already handled in atmel-i2c. Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2024-05-10crypto: atmel-sha204a - add reading from otp zoneLothar Rubusch
Provide a read function reading the otp zone. The otp zone can be used for storing serial numbers. The otp zone, as also data zone, are only accessible if the chip was locked before. Locking the chip is a post production customization and has to be done manually i.e. not by this driver. Without this step the chip is pretty much not usable, where putting or not putting data into the otp zone is optional. Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2024-05-10crypto: atmel-i2c - rename read functionLothar Rubusch
Make the memory read function name more specific to the read memory zone. The Atmel SHA204 chips provide config, otp and data zone. The implemented read function in fact only reads some fields in zone config. The function renaming allows for a uniform naming scheme when reading from other memory zones. Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2024-05-10crypto: atmel-i2c - add missing arg descriptionLothar Rubusch
Add missing description for argument hwrng. Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2024-05-10crypto: iaa - Use kmemdup() instead of kzalloc() and memcpy()Thorsten Blum
Fixes the following two Coccinelle/coccicheck warnings reported by memdup.cocci: iaa_crypto_main.c:350:19-26: WARNING opportunity for kmemdup iaa_crypto_main.c:358:18-25: WARNING opportunity for kmemdup Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com> Reviewed-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2024-05-10crypto: sahara - use 'time_left' variable with wait_for_completion_timeout()Wolfram Sang
There is a confusing pattern in the kernel to use a variable named 'timeout' to store the result of wait_for_completion_timeout() causing patterns like: timeout = wait_for_completion_timeout(...) if (!timeout) return -ETIMEDOUT; with all kinds of permutations. Use 'time_left' as a variable to make the code self explaining. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2024-05-10crypto: caam - i.MX8ULP donot have CAAM page0 accessPankaj Gupta
iMX8ULP have a secure-enclave hardware IP called EdgeLock Enclave(ELE), that control access to caam controller's register page, i.e., page0. At all, if the ELE release access to CAAM controller's register page, it will release to secure-world only. Clocks are turned on automatically for iMX8ULP. There exists the caam clock gating bit, but it is not advised to gate the clock at linux, as optee-os or any other entity might be using it. Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com> Reviewed-by: Gaurav Jain <gaurav.jain@nxp.com> Reviewed-by: Horia Geanta <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2024-05-10crypto: caam - init-clk based on caam-page0-accessPankaj Gupta
CAAM clock initializat is done based on the basis of soc specific info stored in struct caam_imx_data: - caam-page0-access flag - num_clks CAAM driver needs to be aware of access rights to CAAM control page i.e., page0, to do things differently. Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com> Reviewed-by: Gaurav Jain <gaurav.jain@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2024-05-10crypto: starfive - Use fallback for unaligned dma accessJia Jie Ho
Dma address mapping fails on unaligned scatterlist offset. Use sw fallback for these cases. Signed-off-by: Jia Jie Ho <jiajie.ho@starfivetech.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2024-05-10crypto: starfive - Do not free stack bufferJia Jie Ho
RSA text data uses variable length buffer allocated in software stack. Calling kfree on it causes undefined behaviour in subsequent operations. Cc: <stable@vger.kernel.org> #6.7+ Signed-off-by: Jia Jie Ho <jiajie.ho@starfivetech.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2024-05-10crypto: starfive - Skip unneeded fallback allocationJia Jie Ho
Skip sw fallback allocation if RSA module failed to get device handle. Signed-off-by: Jia Jie Ho <jiajie.ho@starfivetech.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2024-05-10crypto: starfive - Skip dma setup for zeroed messageJia Jie Ho
Skip dma setup and mapping for AES driver if plaintext is empty. Signed-off-by: Jia Jie Ho <jiajie.ho@starfivetech.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2024-05-10clocksource/drivers/arm_arch_timer: Mark hisi_161010101_oem_info constStephen Boyd
This isn't modified at runtime. Mark it const so it can move to read-only data. Cc: dann frazier <dann.frazier@canonical.com> Cc: Hanjun Guo <hanjun.guo@linaro.org> Cc: Marc Zyngier <maz@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Hanjun Guo <guohanjun@huawei.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20240502233447.420888-1-swboyd@chromium.org
2024-05-10clocksource/drivers/timer-ti-dm: Remove an unused field in struct dmtimerChristophe JAILLET
In "struct dmtimer", the 'rate' field is unused. Remove it. Found with cppcheck, unusedStructMember. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/c9f7579922c587fce334a1aa9651f3189de7a00b.1714513336.git.christophe.jaillet@wanadoo.fr
2024-05-10clocksource/drivers/renesas-ostm: Avoid reprobe after successful early probeGeert Uytterhoeven
The Renesas OS Timer (OSTM) driver contains two probe points, of which only one should complete: 1. Early probe, using TIMER_OF_DECLARE(), to provide the sole clocksource on (arm32) RZ/A1 and RZ/A2 SoCs, 2. Normal probe, using a platform driver, to provide additional timers on (arm64 + riscv) RZ/G2L and similar SoCs. The latter is needed because using OSTM on RZ/G2L requires manipulation of its reset signal, which is not yet available at the time of early probe, causing early probe to fail with -EPROBE_DEFER. It is only enabled when building a kernel with support for the RZ/G2L family, so it does not impact RZ/A1 and RZ/A2. Hence only one probe method can complete on all affected systems. As relying on the order of initialization of subsystems inside the kernel is fragile, set the DT node's OF_POPULATED flag after a succesful early probe. This makes sure the platform driver's probe is never called after a successful early probe. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviwed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/bd027379713cbaafa21ffe9e848ebb7f475ca0e7.1710930542.git.geert+renesas@glider.be
2024-05-10clocksource/drivers/renesas-ostm: Allow OSTM driver to reprobe for RZ/V2H(P) SoCLad Prabhakar
The RZ/V2H(P) (R9A09G057) SoC is equipped with the Generic Timer Module, also known as OSTM. Similar to the RZ/G2L SoC, the OSTM on the RZ/V2H(P) SoC requires the reset line to be deasserted before accessing any registers. Early call to ostm_init() happens through TIMER_OF_DECLARE() which always fails with -EPROBE_DEFER, as resets are not available that early in the boot process. To address this issue on the RZ/V2H(P) SoC, enable the OSTM driver to be reprobed through the platform driver probe mechanism. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20240322151219.885832-3-prabhakar.mahadev-lad.rj@bp.renesas.com
2024-05-10Merge 6.9-rc7 into usb-nextGreg Kroah-Hartman
We want the USB fixes in here as well, and resolve a merge conflict in drivers/usb/dwc3/core.c Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-10iommu/arm-smmu: Use the correct type in nvidia_smmu_context_fault()Jason Gunthorpe
This was missed because of the function pointer indirection. nvidia_smmu_context_fault() is also installed as a irq function, and the 'void *' was changed to a struct arm_smmu_domain. Since the iommu_domain is embedded at a non-zero offset this causes nvidia_smmu_context_fault() to miscompute the offset. Fixup the types. Unable to handle kernel NULL pointer dereference at virtual address 0000000000000120 Mem abort info: ESR = 0x0000000096000004 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x04: level 0 translation fault Data abort info: ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 CM = 0, WnR = 0, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 user pgtable: 4k pages, 48-bit VAs, pgdp=0000000107c9f000 [0000000000000120] pgd=0000000000000000, p4d=0000000000000000 Internal error: Oops: 0000000096000004 [#1] SMP Modules linked in: CPU: 1 PID: 47 Comm: kworker/u25:0 Not tainted 6.9.0-0.rc7.58.eln136.aarch64 #1 Hardware name: Unknown NVIDIA Jetson Orin NX/NVIDIA Jetson Orin NX, BIOS 3.1-32827747 03/19/2023 Workqueue: events_unbound deferred_probe_work_func pstate: 604000c9 (nZCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : nvidia_smmu_context_fault+0x1c/0x158 lr : __free_irq+0x1d4/0x2e8 sp : ffff80008044b6f0 x29: ffff80008044b6f0 x28: ffff000080a60b18 x27: ffffd32b5172e970 x26: 0000000000000000 x25: ffff0000802f5aac x24: ffff0000802f5a30 x23: ffff0000802f5b60 x22: 0000000000000057 x21: 0000000000000000 x20: ffff0000802f5a00 x19: ffff000087d4cd80 x18: ffffffffffffffff x17: 6234362066666666 x16: 6630303078302d30 x15: ffff00008156d888 x14: 0000000000000000 x13: ffff0000801db910 x12: ffff00008156d6d0 x11: 0000000000000003 x10: ffff0000801db918 x9 : ffffd32b50f94d9c x8 : 1fffe0001032fda1 x7 : ffff00008197ed00 x6 : 000000000000000f x5 : 000000000000010e x4 : 000000000000010e x3 : 0000000000000000 x2 : ffffd32b51720cd8 x1 : ffff000087e6f700 x0 : 0000000000000057 Call trace: nvidia_smmu_context_fault+0x1c/0x158 __free_irq+0x1d4/0x2e8 free_irq+0x3c/0x80 devm_free_irq+0x64/0xa8 arm_smmu_domain_free+0xc4/0x158 iommu_domain_free+0x44/0xa0 iommu_deinit_device+0xd0/0xf8 __iommu_group_remove_device+0xcc/0xe0 iommu_bus_notifier+0x64/0xa8 notifier_call_chain+0x78/0x148 blocking_notifier_call_chain+0x4c/0x90 bus_notify+0x44/0x70 device_del+0x264/0x3e8 pci_remove_bus_device+0x84/0x120 pci_remove_root_bus+0x5c/0xc0 dw_pcie_host_deinit+0x38/0xe0 tegra_pcie_config_rp+0xc0/0x1f0 tegra_pcie_dw_probe+0x34c/0x700 platform_probe+0x70/0xe8 really_probe+0xc8/0x3a0 __driver_probe_device+0x84/0x160 driver_probe_device+0x44/0x130 __device_attach_driver+0xc4/0x170 bus_for_each_drv+0x90/0x100 __device_attach+0xa8/0x1c8 device_initial_probe+0x1c/0x30 bus_probe_device+0xb0/0xc0 deferred_probe_work_func+0xbc/0x120 process_one_work+0x194/0x490 worker_thread+0x284/0x3b0 kthread+0xf4/0x108 ret_from_fork+0x10/0x20 Code: a9b97bfd 910003fd a9025bf5 f85a0035 (b94122a1) Cc: stable@vger.kernel.org Fixes: e0976331ad11 ("iommu/arm-smmu: Pass arm_smmu_domain to internal functions") Reported-by: Jerry Snitselaar <jsnitsel@redhat.com> Closes: https://lore.kernel.org/all/jto5e3ili4auk6sbzpnojdvhppgwuegir7mpd755anfhwcbkfz@2u5gh7bxb4iv Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Tested-by: Jerry Snitselaar <jsnitsel@redhat.com> Acked-by: Jerry Snitselaar <jsnitsel@redhat.com> Link: https://lore.kernel.org/r/0-v1-24ce064de41f+4ac-nvidia_smmu_fault_jgg@nvidia.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2024-05-10pwm: pca9685: Drop explicit initialization of struct ↵Uwe Kleine-König
i2c_device_id::driver_data to 0 The driver doesn't use the driver_data member of struct i2c_device_id, so don't explicitly initialize this member. This prepares putting driver_data in an anonymous union which requires either no initialization or named designators. But it's also a nice cleanup on its own. While add it, also remove the trailing commas after the sentinel entry. Link: https://lore.kernel.org/r/20240508130618.2148631-2-u.kleine-koenig@pengutronix.de Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2024-05-09ptp: ocp: fix DPLL functionsVadim Fedorenko
In ptp_ocp driver pin actions assume sma_nr starts with 1, but for DPLL subsystem callback 0-based index was used. Fix it providing proper index. Fixes: 09eeb3aecc6c ("ptp_ocp: implement DPLL ops") Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Link: https://lore.kernel.org/r/20240508132111.11545-1-vadim.fedorenko@linux.dev Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-10Merge tag 'drm-xe-next-fixes-2024-05-09-1' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/xe/kernel into drm-next Driver Changes: - Use ordered WQ for G2H handler. (Matthew Brost) - Use flexible-array rather than zero-sized (Lucas De Marchi) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/Zjz7SzCvfA3vQRxu@fedora
2024-05-10Merge tag 'drm-misc-next-fixes-2024-05-08' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next drm-misc-next-fixes for v6.10-rc1: - panthor fixes. - Reverting Kconfig changes, and moving drm options to submenu. - Hide physical fb address in fb helper. - zynqmp bridge fix. - Revert broken ti-sn65dsi83 fix. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/fe630414-d13e-4052-86f3-ce3155eb3e44@linux.intel.com
2024-05-10Merge tag 'drm-msm-next-2024-05-07' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/msm into drm-next Updates for v6.10 Core: - Switched to generating register header files during build process instead of shipping pre-generated headers - Merged DPU and MDP4 format databases. DP: - Stop using compat string to distinguish DP and eDP cases - Added support for X Elite platform (X1E80100) - Reworked DP aux/audio support - Added SM6350 DP to the bindings (no driver changes, using SM8350 as a fallback compat) GPU: - a7xx perfcntr reg fixes - MAINTAINERS updates - a750 devcoredump support Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGtpw6dNR9JBikFTQ=TCpt-9FeFW+SGjXWv+Jv3emm0Pbg@mail.gmail.com
2024-05-10Merge tag 'drm-xe-fixes-2024-05-09' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes - Fix use zero-length element array - Move more from system wq to ordered private wq - Do not ignore return for drmm_mutex_init Signed-off-by: Dave Airlie <airlied@redhat.com> From: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/c3rduifdp5wipkljdpuq4x6uowkc2uyzgdoft4txvp6mgvzjaj@7zw7c6uw4wrf
2024-05-10media: bcm2835-unicam: Fix a NULL vs IS_ERR() checkDan Carpenter
The media_pad_remote_pad_unique() function returns error pointers, not NULL. Update the check accordingly. Fixes: 392cd78d495f ("media: bcm2835-unicam: Add support for CCP2/CSI2 camera interface") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://lore.kernel.org/r/fbbe7862-2820-44eb-81cb-7f33b99cca35@moroto.mountain Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2024-05-10media: bcm2835-unicam: Do not print error when irq not foundRicardo Ribalda
platform_get_irq() already prints an error for us. Fix this cocci warning: drivers/media/platform/broadcom/bcm2835-unicam.c:2664:2-9: line 2664 is redundant because platform_get_irq() already prints an error Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Link: https://lore.kernel.org/r/20240506-fix-broad-v2-2-e6a2a5c0d609@chromium.org Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2024-05-10media: bcm2835-unicam: Do not replace IRQ retcode during probeRicardo Ribalda
platform_get_irq() cannot return the value 0. It will either return a non-zero irq or a errcode. If a errcode is returned, we need to populate the error code upwards. It will give a more accurate reason of why it failed to the caller, who might decide to retry later. Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://lore.kernel.org/r/20240506-fix-broad-v2-1-e6a2a5c0d609@chromium.org Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2024-05-10media: bcm2835-unicam: Convert to platform remove callback returning voidUwe Kleine-König
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://lore.kernel.org/r/20240506100917.1544174-2-u.kleine-koenig@pengutronix.de Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2024-05-09vfio/pci: Collect hot-reset devices to local bufferAlex Williamson
Lockdep reports the below circular locking dependency issue. The mmap_lock acquisition while holding pci_bus_sem is due to the use of copy_to_user() from within a pci_walk_bus() callback. Building the devices array directly into the user buffer is only for convenience. Instead we can allocate a local buffer for the array, bounded by the number of devices on the bus/slot, fill the device information into this local buffer, then copy it into the user buffer outside the bus walk callback. ====================================================== WARNING: possible circular locking dependency detected 6.9.0-rc5+ #39 Not tainted ------------------------------------------------------ CPU 0/KVM/4113 is trying to acquire lock: ffff99a609ee18a8 (&vdev->vma_lock){+.+.}-{4:4}, at: vfio_pci_mmap_fault+0x35/0x1a0 [vfio_pci_core] but task is already holding lock: ffff99a243a052a0 (&mm->mmap_lock){++++}-{4:4}, at: vaddr_get_pfns+0x3f/0x170 [vfio_iommu_type1] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #3 (&mm->mmap_lock){++++}-{4:4}: __lock_acquire+0x4e4/0xb90 lock_acquire+0xbc/0x2d0 __might_fault+0x5c/0x80 _copy_to_user+0x1e/0x60 vfio_pci_fill_devs+0x9f/0x130 [vfio_pci_core] vfio_pci_walk_wrapper+0x45/0x60 [vfio_pci_core] __pci_walk_bus+0x6b/0xb0 vfio_pci_ioctl_get_pci_hot_reset_info+0x10b/0x1d0 [vfio_pci_core] vfio_pci_core_ioctl+0x1cb/0x400 [vfio_pci_core] vfio_device_fops_unl_ioctl+0x7e/0x140 [vfio] __x64_sys_ioctl+0x8a/0xc0 do_syscall_64+0x8d/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e -> #2 (pci_bus_sem){++++}-{4:4}: __lock_acquire+0x4e4/0xb90 lock_acquire+0xbc/0x2d0 down_read+0x3e/0x160 pci_bridge_wait_for_secondary_bus.part.0+0x33/0x2d0 pci_reset_bus+0xdd/0x160 vfio_pci_dev_set_hot_reset+0x256/0x270 [vfio_pci_core] vfio_pci_ioctl_pci_hot_reset_groups+0x1a3/0x280 [vfio_pci_core] vfio_pci_core_ioctl+0x3b5/0x400 [vfio_pci_core] vfio_device_fops_unl_ioctl+0x7e/0x140 [vfio] __x64_sys_ioctl+0x8a/0xc0 do_syscall_64+0x8d/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e -> #1 (&vdev->memory_lock){+.+.}-{4:4}: __lock_acquire+0x4e4/0xb90 lock_acquire+0xbc/0x2d0 down_write+0x3b/0xc0 vfio_pci_zap_and_down_write_memory_lock+0x1c/0x30 [vfio_pci_core] vfio_basic_config_write+0x281/0x340 [vfio_pci_core] vfio_config_do_rw+0x1fa/0x300 [vfio_pci_core] vfio_pci_config_rw+0x75/0xe50 [vfio_pci_core] vfio_pci_rw+0xea/0x1a0 [vfio_pci_core] vfs_write+0xea/0x520 __x64_sys_pwrite64+0x90/0xc0 do_syscall_64+0x8d/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e -> #0 (&vdev->vma_lock){+.+.}-{4:4}: check_prev_add+0xeb/0xcc0 validate_chain+0x465/0x530 __lock_acquire+0x4e4/0xb90 lock_acquire+0xbc/0x2d0 __mutex_lock+0x97/0xde0 vfio_pci_mmap_fault+0x35/0x1a0 [vfio_pci_core] __do_fault+0x31/0x160 do_pte_missing+0x65/0x3b0 __handle_mm_fault+0x303/0x720 handle_mm_fault+0x10f/0x460 fixup_user_fault+0x7f/0x1f0 follow_fault_pfn+0x66/0x1c0 [vfio_iommu_type1] vaddr_get_pfns+0xf2/0x170 [vfio_iommu_type1] vfio_pin_pages_remote+0x348/0x4e0 [vfio_iommu_type1] vfio_pin_map_dma+0xd2/0x330 [vfio_iommu_type1] vfio_dma_do_map+0x2c0/0x440 [vfio_iommu_type1] vfio_iommu_type1_ioctl+0xc5/0x1d0 [vfio_iommu_type1] __x64_sys_ioctl+0x8a/0xc0 do_syscall_64+0x8d/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e other info that might help us debug this: Chain exists of: &vdev->vma_lock --> pci_bus_sem --> &mm->mmap_lock Possible unsafe locking scenario: block dm-0: the capability attribute has been deprecated. CPU0 CPU1 ---- ---- rlock(&mm->mmap_lock); lock(pci_bus_sem); lock(&mm->mmap_lock); lock(&vdev->vma_lock); *** DEADLOCK *** 2 locks held by CPU 0/KVM/4113: #0: ffff99a25f294888 (&iommu->lock#2){+.+.}-{4:4}, at: vfio_dma_do_map+0x60/0x440 [vfio_iommu_type1] #1: ffff99a243a052a0 (&mm->mmap_lock){++++}-{4:4}, at: vaddr_get_pfns+0x3f/0x170 [vfio_iommu_type1] stack backtrace: CPU: 1 PID: 4113 Comm: CPU 0/KVM Not tainted 6.9.0-rc5+ #39 Hardware name: Dell Inc. PowerEdge T640/04WYPY, BIOS 2.15.1 06/16/2022 Call Trace: <TASK> dump_stack_lvl+0x64/0xa0 check_noncircular+0x131/0x150 check_prev_add+0xeb/0xcc0 ? add_chain_cache+0x10a/0x2f0 ? __lock_acquire+0x4e4/0xb90 validate_chain+0x465/0x530 __lock_acquire+0x4e4/0xb90 lock_acquire+0xbc/0x2d0 ? vfio_pci_mmap_fault+0x35/0x1a0 [vfio_pci_core] ? lock_is_held_type+0x9a/0x110 __mutex_lock+0x97/0xde0 ? vfio_pci_mmap_fault+0x35/0x1a0 [vfio_pci_core] ? lock_acquire+0xbc/0x2d0 ? vfio_pci_mmap_fault+0x35/0x1a0 [vfio_pci_core] ? find_held_lock+0x2b/0x80 ? vfio_pci_mmap_fault+0x35/0x1a0 [vfio_pci_core] vfio_pci_mmap_fault+0x35/0x1a0 [vfio_pci_core] __do_fault+0x31/0x160 do_pte_missing+0x65/0x3b0 __handle_mm_fault+0x303/0x720 handle_mm_fault+0x10f/0x460 fixup_user_fault+0x7f/0x1f0 follow_fault_pfn+0x66/0x1c0 [vfio_iommu_type1] vaddr_get_pfns+0xf2/0x170 [vfio_iommu_type1] vfio_pin_pages_remote+0x348/0x4e0 [vfio_iommu_type1] vfio_pin_map_dma+0xd2/0x330 [vfio_iommu_type1] vfio_dma_do_map+0x2c0/0x440 [vfio_iommu_type1] vfio_iommu_type1_ioctl+0xc5/0x1d0 [vfio_iommu_type1] __x64_sys_ioctl+0x8a/0xc0 do_syscall_64+0x8d/0x170 ? rcu_core+0x8d/0x250 ? __lock_release+0x5e/0x160 ? rcu_core+0x8d/0x250 ? lock_release+0x5f/0x120 ? sched_clock+0xc/0x30 ? sched_clock_cpu+0xb/0x190 ? irqtime_account_irq+0x40/0xc0 ? __local_bh_enable+0x54/0x60 ? __do_softirq+0x315/0x3ca ? lockdep_hardirqs_on_prepare.part.0+0x97/0x140 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f8300d0357b Code: ff ff ff 85 c0 79 9b 49 c7 c4 ff ff ff ff 5b 5d 4c 89 e0 41 5c c3 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 75 68 0f 00 f7 d8 64 89 01 48 RSP: 002b:00007f82ef3fb948 EFLAGS: 00000206 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f8300d0357b RDX: 00007f82ef3fb990 RSI: 0000000000003b71 RDI: 0000000000000023 RBP: 00007f82ef3fb9c0 R08: 0000000000000000 R09: 0000561b7e0bcac2 R10: 0000000000000000 R11: 0000000000000206 R12: 0000000000000000 R13: 0000000200000000 R14: 0000381800000000 R15: 0000000000000000 </TASK> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/r/20240503143138.3562116-1-alex.williamson@redhat.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2024-05-09hwmon: Drop explicit initialization of struct i2c_device_id::driver_data to ↵Uwe Kleine-König
0 (part 2) These drivers don't use the driver_data member of struct i2c_device_id, so don't explicitly initialize this member. This prepares putting driver_data in an anonymous union which requires either no initialization or named designators. But it's also a nice cleanup on its own. This is a follow up to commit d8a66f3621c2 ("hwmon: Drop explicit initialization of struct i2c_device_id::driver_data to 0") which I created before identifying a few corner cases in my conversion script. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20240508072027.2119857-2-u.kleine-koenig@pengutronix.de Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2024-05-10kbuild: use $(src) instead of $(srctree)/$(src) for source directoryMasahiro Yamada
Kbuild conventionally uses $(obj)/ for generated files, and $(src)/ for checked-in source files. It is merely a convention without any functional difference. In fact, $(obj) and $(src) are exactly the same, as defined in scripts/Makefile.build: src := $(obj) When the kernel is built in a separate output directory, $(src) does not accurately reflect the source directory location. While Kbuild resolves this discrepancy by specifying VPATH=$(srctree) to search for source files, it does not cover all cases. For example, when adding a header search path for local headers, -I$(srctree)/$(src) is typically passed to the compiler. This introduces inconsistency between upstream and downstream Makefiles because $(src) is used instead of $(srctree)/$(src) for the latter. To address this inconsistency, this commit changes the semantics of $(src) so that it always points to the directory in the source tree. Going forward, the variables used in Makefiles will have the following meanings: $(obj) - directory in the object tree $(src) - directory in the source tree (changed by this commit) $(objtree) - the top of the kernel object tree $(srctree) - the top of the kernel source tree Consequently, $(srctree)/$(src) in upstream Makefiles need to be replaced with $(src). Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
2024-05-09tpm: disable the TPM if NULL name changesJames Bottomley
Update tpm2_load_context() to return -EINVAL on integrity failures and use this as a signal when loading the NULL context that something might be wrong. If the signal fails, check the name of the NULL primary against the one stored in the chip data and if there is a mismatch disable the TPM because it is likely to have suffered a reset attack. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Tested-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2024-05-09tpm: add the null key name as a sysfs exportJames Bottomley
This is the last component of encrypted tpm2 session handling that allows us to verify from userspace that the key derived from the NULL seed genuinely belongs to the TPM and has not been spoofed. The procedure for doing this involves creating an attestation identity key (which requires verification of the TPM EK certificate) and then using that AIK to sign a certification of the Elliptic Curve key over the NULL seed. Userspace must create this EC Key using the parameters prescribed in TCG TPM v2.0 Provisioning Guidance for the SRK ECC; if this is done correctly the names will match and the TPM can then run a TPM2_Certify operation on this derived primary key using the newly created AIK. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Tested-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2024-05-09tpm: add session encryption protection to tpm2_get_random()James Bottomley
If some entity is snooping the TPM bus, they can see the random numbers we're extracting from the TPM and do prediction attacks against their consumers. Foil this attack by using response encryption to prevent the attacker from seeing the random sequence. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Tested-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-14 08:37:34 +0000