summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2025-04-18vhost-scsi: Fix vhost_scsi_send_bad_target()Dongli Zhang
Although the support of VIRTIO_F_ANY_LAYOUT + VIRTIO_F_VERSION_1 was signaled by the commit 664ed90e621c ("vhost/scsi: Set VIRTIO_F_ANY_LAYOUT + VIRTIO_F_VERSION_1 feature bits"), vhost_scsi_send_bad_target() still assumes the response in a single descriptor. In addition, although vhost_scsi_send_bad_target() is used by both I/O queue and control queue, the response header is always virtio_scsi_cmd_resp. It is required to use virtio_scsi_ctrl_tmf_resp or virtio_scsi_ctrl_an_resp for control queue. Fixes: 664ed90e621c ("vhost/scsi: Set VIRTIO_F_ANY_LAYOUT + VIRTIO_F_VERSION_1 feature bits") Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com> Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Mike Christie <michael.christie@oracle.com> Message-Id: <20250403063028.16045-3-dongli.zhang@oracle.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2025-04-18vhost-scsi: protect vq->log_used with vq->mutexDongli Zhang
The vhost-scsi completion path may access vq->log_base when vq->log_used is already set to false. vhost-thread QEMU-thread vhost_scsi_complete_cmd_work() -> vhost_add_used() -> vhost_add_used_n() if (unlikely(vq->log_used)) QEMU disables vq->log_used via VHOST_SET_VRING_ADDR. mutex_lock(&vq->mutex); vq->log_used = false now! mutex_unlock(&vq->mutex); QEMU gfree(vq->log_base) log_used() -> log_write(vq->log_base) Assuming the VMM is QEMU. The vq->log_base is from QEMU userpace and can be reclaimed via gfree(). As a result, this causes invalid memory writes to QEMU userspace. The control queue path has the same issue. Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com> Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Mike Christie <michael.christie@oracle.com> Message-Id: <20250403063028.16045-2-dongli.zhang@oracle.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2025-04-18virtio_console: fix order of fields cols and rowsMaximilian Immanuel Brandtner
According to section 5.3.6.2 (Multiport Device Operation) of the virtio spec(version 1.2) a control buffer with the event VIRTIO_CONSOLE_RESIZE is followed by a virtio_console_resize struct containing cols then rows. The kernel implements this the wrong way around (rows then cols) resulting in the two values being swapped. Signed-off-by: Maximilian Immanuel Brandtner <maxbr@linux.ibm.com> Message-Id: <20250324144300.905535-1-maxbr@linux.ibm.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2025-04-18virtio_console: fix missing byte order handling for cols and rowsHalil Pasic
As per virtio spec the fields cols and rows are specified as little endian. Although there is no legacy interface requirement that would state that cols and rows need to be handled as native endian when legacy interface is used, unlike for the fields of the adjacent struct virtio_console_control, I decided to err on the side of caution based on some non-conclusive virtio spec repo archaeology and opt for using virtio16_to_cpu() much like for virtio_console_control.event. Strictly by the letter of the spec virtio_le_to_cpu() would have been sufficient. But when the legacy interface is not used, it boils down to the same. And when using the legacy interface, the device formatting these as little endian when the guest is big endian would surprise me more than it using guest native byte order (which would make it compatible with the current implementation). Nevertheless somebody trying to implement the spec following it to the letter could end up forcing little endian byte order when the legacy interface is in use. So IMHO this ultimately needs a judgement call by the maintainers. Fixes: 8345adbf96fc1 ("virtio: console: Accept console size along with resize control message") Signed-off-by: Halil Pasic <pasic@linux.ibm.com> Cc: stable@vger.kernel.org # v2.6.35+ Message-Id: <20250322002954.3129282-1-pasic@linux.ibm.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2025-04-18virtgpu: don't reset on shutdownMichael S. Tsirkin
It looks like GPUs are used after shutdown is invoked. Thus, breaking virtio gpu in the shutdown callback is not a good idea - guest hangs attempting to finish console drawing, with these warnings: [ 20.504464] WARNING: CPU: 0 PID: 568 at drivers/gpu/drm/virtio/virtgpu_vq.c:358 virtio_gpu_queue_ctrl_sgs+0x236/0x290 [virtio_gpu] [ 20.505685] Modules linked in: nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 rfkill ip_set nf_tables nfnetlink vfat fat intel_rapl_msr intel_rapl_common intel_uncore_frequency_common nfit libnvdimm kvm_intel kvm rapl iTCO_wdt iTCO_vendor_support virtio_gpu virtio_dma_buf pcspkr drm_shmem_helper i2c_i801 drm_kms_helper lpc_ich i2c_smbus virtio_balloon joydev drm fuse xfs libcrc32c ahci libahci crct10dif_pclmul crc32_pclmul crc32c_intel libata virtio_net ghash_clmulni_intel net_failover virtio_blk failover serio_raw dm_mirror dm_region_hash dm_log dm_mod [ 20.511847] CPU: 0 PID: 568 Comm: kworker/0:3 Kdump: loaded Tainted: G W ------- --- 5.14.0-578.6675_1757216455.el9.x86_64 #1 [ 20.513157] Hardware name: Red Hat KVM/RHEL, BIOS edk2-20241117-3.el9 11/17/2024 [ 20.513918] Workqueue: events drm_fb_helper_damage_work [drm_kms_helper] [ 20.514626] RIP: 0010:virtio_gpu_queue_ctrl_sgs+0x236/0x290 [virtio_gpu] [ 20.515332] Code: 00 00 48 85 c0 74 0c 48 8b 78 08 48 89 ee e8 51 50 00 00 65 ff 0d 42 e3 74 3f 0f 85 69 ff ff ff 0f 1f 44 00 00 e9 5f ff ff ff <0f> 0b e9 3f ff ff ff 48 83 3c 24 00 74 0e 49 8b 7f 40 48 85 ff 74 [ 20.517272] RSP: 0018:ff34f0a8c0787ad8 EFLAGS: 00010282 [ 20.517820] RAX: 00000000fffffffb RBX: 0000000000000000 RCX: 0000000000000820 [ 20.518565] RDX: 0000000000000000 RSI: ff34f0a8c0787be0 RDI: ff218bef03a26300 [ 20.519308] RBP: ff218bef03a26300 R08: 0000000000000001 R09: ff218bef07224360 [ 20.520059] R10: 0000000000008dc0 R11: 0000000000000002 R12: ff218bef02630028 [ 20.520806] R13: ff218bef0263fb48 R14: ff218bef00cb8000 R15: ff218bef07224360 [ 20.521555] FS: 0000000000000000(0000) GS:ff218bef7ba00000(0000) knlGS:0000000000000000 [ 20.522397] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 20.522996] CR2: 000055ac4f7871c0 CR3: 000000010b9f2002 CR4: 0000000000771ef0 [ 20.523740] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 20.524477] DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400 [ 20.525223] PKRU: 55555554 [ 20.525515] Call Trace: [ 20.525777] <TASK> [ 20.526003] ? show_trace_log_lvl+0x1c4/0x2df [ 20.526464] ? show_trace_log_lvl+0x1c4/0x2df [ 20.526925] ? virtio_gpu_queue_fenced_ctrl_buffer+0x82/0x2c0 [virtio_gpu] [ 20.527643] ? virtio_gpu_queue_ctrl_sgs+0x236/0x290 [virtio_gpu] [ 20.528282] ? __warn+0x7e/0xd0 [ 20.528621] ? virtio_gpu_queue_ctrl_sgs+0x236/0x290 [virtio_gpu] [ 20.529256] ? report_bug+0x100/0x140 [ 20.529643] ? handle_bug+0x3c/0x70 [ 20.530010] ? exc_invalid_op+0x14/0x70 [ 20.530421] ? asm_exc_invalid_op+0x16/0x20 [ 20.530862] ? virtio_gpu_queue_ctrl_sgs+0x236/0x290 [virtio_gpu] [ 20.531506] ? virtio_gpu_queue_ctrl_sgs+0x174/0x290 [virtio_gpu] [ 20.532148] virtio_gpu_queue_fenced_ctrl_buffer+0x82/0x2c0 [virtio_gpu] [ 20.532843] virtio_gpu_primary_plane_update+0x3e2/0x460 [virtio_gpu] [ 20.533520] drm_atomic_helper_commit_planes+0x108/0x320 [drm_kms_helper] [ 20.534233] drm_atomic_helper_commit_tail+0x45/0x80 [drm_kms_helper] [ 20.534914] commit_tail+0xd2/0x130 [drm_kms_helper] [ 20.535446] drm_atomic_helper_commit+0x11b/0x140 [drm_kms_helper] [ 20.536097] drm_atomic_commit+0xa4/0xe0 [drm] [ 20.536588] ? __pfx___drm_printfn_info+0x10/0x10 [drm] [ 20.537162] drm_atomic_helper_dirtyfb+0x192/0x270 [drm_kms_helper] [ 20.537823] drm_fbdev_shmem_helper_fb_dirty+0x43/0xa0 [drm_shmem_helper] [ 20.538536] drm_fb_helper_damage_work+0x87/0x160 [drm_kms_helper] [ 20.539188] process_one_work+0x194/0x380 [ 20.539612] worker_thread+0x2fe/0x410 [ 20.540007] ? __pfx_worker_thread+0x10/0x10 [ 20.540456] kthread+0xdd/0x100 [ 20.540791] ? __pfx_kthread+0x10/0x10 [ 20.541190] ret_from_fork+0x29/0x50 [ 20.541566] </TASK> [ 20.541802] ---[ end trace 0000000000000000 ]--- It looks like the shutdown is called in the middle of console drawing, so we should either wait for it to finish, or let drm handle the shutdown. This patch implements this second option: Add an option for drivers to bypass the common break+reset handling. As DRM is careful to flush/synchronize outstanding buffers, it looks like GPU can just have a NOP there. Reviewed-by: Eric Auger <eric.auger@redhat.com> Tested-by: Eric Auger <eric.auger@redhat.com> Fixes: 8bd2fa086a04 ("virtio: break and reset virtio devices on device_shutdown()") Cc: Eric Auger <eauger@redhat.com> Cc: Jocelyn Falempe <jfalempe@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Message-Id: <8490dbeb6f79ed039e6c11d121002618972538a3.1744293540.git.mst@redhat.com>
2025-04-18PCI: Restore assigned resources fully after releaseIlpo Järvinen
PCI resource fitting code in __assign_resources_sorted() runs in multiple steps. A resource that was successfully assigned may have to be released before the next step attempts assignment again. The assign+release cycle is destructive to a start-aligned struct resource (bridge window or IOV resource) because the start field is overwritten with the real address when the resource got assigned. One symptom: pci 0002:00:00.0: bridge window [mem size 0x00100000]: can't assign; bogus alignment Properly restore the resource after releasing it. The start, end, and flags fields must be stored into the related struct pci_dev_resource in order to be able to restore the resource to its original state. Fixes: 96336ec70264 ("PCI: Perform reset_resource() and build fail list in sync") Reported-by: Guenter Roeck <linux@roeck-us.net> Closes: https://lore.kernel.org/r/01eb7d40-f5b5-4ec5-b390-a5c042c30aff@roeck-us.net/ Reported-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com> Closes: https://lore.kernel.org/r/3578030.5fSG56mABF@workhorse Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Tested-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Ondrej Jirman <megi@xff.cz> Link: https://patch.msgid.link/20250403093137.1481-1-ilpo.jarvinen@linux.intel.com
2025-04-18Merge tag 'usb-serial-6.15-rc3' of ↵Greg Kroah-Hartman
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: USB-serial device ids for 6.15-rc3 Here's a new simple driver for Owon oscilloscopes and a couple of new new modem and smart meter device ids. All have been in linux-next with no reported issues. * tag 'usb-serial-6.15-rc3' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: USB: serial: simple: add OWON HDS200 series oscilloscope support USB: serial: ftdi_sio: add support for Abacus Electrics Optical Probe USB: serial: option: add Sierra Wireless EM9291
2025-04-17drm/xe/pxp: do not queue unneeded terminations from debugfsDaniele Ceraolo Spurio
The PXP terminate debugfs currently unconditionally simulates a termination, no matter what the HW status is. This is unneeded if PXP is not in use and can cause errors if the HW init hasn't completed yet. To solve these issues, we can simply limit the terminations to the cases where PXP is fully initialized and in use. v2: s/pxp_status/ready/ to avoid confusion with pxp->status (John) Fixes: 385a8015b214 ("drm/xe/pxp: Add PXP debugfs support") Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/4749 Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: John Harrison <John.C.Harrison@Intel.com> Reviewed-by: John Harrison <John.C.Harrison@Intel.com> Link: https://lore.kernel.org/r/20250416201622.1295369-1-daniele.ceraolospurio@intel.com (cherry picked from commit ba1f62a0cac84757ca35f4217e3cd3a2654233ae) Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2025-04-17drm/xe/dma_buf: stop relying on placement in unmapMatthew Auld
The is_vram() is checking the current placement, however if we consider exported VRAM with dynamic dma-buf, it looks possible for the xe driver to async evict the memory, notifying the importer, however importer does not have to call unmap_attachment() immediately, but rather just as "soon as possible", like when the dma-resv idles. Following from this we would then pipeline the move, attaching the fence to the manager, and then update the current placement. But when the unmap_attachment() runs at some later point we might see that is_vram() is now false, and take the complete wrong path when dma-unmapping the sg, leading to explosions. To fix this check if the sgl was mapping a struct page. v2: - The attachment can be mapped multiple times it seems, so we can't really rely on encoding something in the attachment->priv. Instead see if the page_link has an encoded struct page. For vram we expect this to be NULL. Link: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/4563 Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs") Signed-off-by: Matthew Auld <matthew.auld@intel.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: <stable@vger.kernel.org> # v6.8+ Acked-by: Christian König <christian.koenig@amd.com> Link: https://lore.kernel.org/r/20250410162716.159403-2-matthew.auld@intel.com (cherry picked from commit d755887f8e5a2a18e15e6632a5193e5feea18499) Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2025-04-17drm/xe/userptr: fix notifier vs folio deadlockMatthew Auld
User is reporting what smells like notifier vs folio deadlock, where migrate_pages_batch() on core kernel side is holding folio lock(s) and then interacting with the mappings of it, however those mappings are tied to some userptr, which means calling into the notifier callback and grabbing the notifier lock. With perfect timing it looks possible that the pages we pulled from the hmm fault can get sniped by migrate_pages_batch() at the same time that we are holding the notifier lock to mark the pages as accessed/dirty, but at this point we also want to grab the folio locks(s) to mark them as dirty, but if they are contended from notifier/migrate_pages_batch side then we deadlock since folio lock won't be dropped until we drop the notifier lock. Fortunately the mark_page_accessed/dirty is not really needed in the first place it seems and should have already been done by hmm fault, so just remove it. Link: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/4765 Fixes: 0a98219bcc96 ("drm/xe/hmm: Don't dereference struct page pointers without notifier lock") Signed-off-by: Matthew Auld <matthew.auld@intel.com> Cc: Thomas Hellström <thomas.hellstrom@intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: <stable@vger.kernel.org> # v6.10+ Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Link: https://lore.kernel.org/r/20250414132539.26654-2-matthew.auld@intel.com (cherry picked from commit bd7c0cb695e87c0e43247be8196b4919edbe0e85) Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2025-04-17drm/xe: Set LRC addresses before guc loadLucas De Marchi
The metadata saved in the ADS is read by GuC when it's initialized. Saving the addresses to the LRCs when they are populated is too late as GuC will keep using the old ones. This was causing GuC to use the RCS LRC for any engine class. It's not a big problem on a Linux-only scenario since the they are used by GuC only on media engines when the watchdog is triggered. However, in a virtualization scenario with Windows as the VF, it causes the wrong LRCs to be loaded as the watchdog is used for all engines. Fix it by letting guc_golden_lrc_init() initialize the metadata, like other *_init() functions, and later guc_golden_lrc_populate() to copy the LRCs to the right places. The former is called before the second GuC load, while the latter is called after LRCs have been recorded. Cc: Chee Yin Wong <chee.yin.wong@intel.com> Cc: John Harrison <john.c.harrison@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs") Cc: <stable@vger.kernel.org> # v6.11+ Reviewed-by: Matthew Brost <matthew.brost@intel.com> Tested-by: Chee Yin Wong <chee.yin.wong@intel.com> Link: https://lore.kernel.org/r/20250409-fix-guc-ads-v1-1-494135f7a5d0@intel.com Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> (cherry picked from commit c31a0b6402d15b530514eee9925adfcb8cfbb1c9) Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2025-04-17Merge tag 'pci-v6.15-fixes-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci Pull pci fix from Bjorn Helgaas: - Revert a reset patch that broke VFIO passthrough because devices ended up with no available reset mechanisms (Alex Williamson) * tag 'pci-v6.15-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: Revert "PCI: Avoid reset when disabled via sysfs"
2025-04-18Merge tag 'drm-misc-fixes-2025-04-17' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes Short summary of fixes pull: dma-buf: - Correctly decrement refcounter on errors gem: - Fix test for imported buffers ivpu: - Fix debugging - Fixes to frequency - Support firmware API 3.28.3 - Flush jobs upon reset mgag200: - Set vblank start to correct values v3d: - Fix Indirect Dispatch Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://lore.kernel.org/r/20250417084043.GA365738@linux.fritz.box
2025-04-18Merge tag 'drm-intel-fixes-2025-04-17' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/i915/kernel into drm-fixes drm/i915 fixes for v6.15-rc3: - Fix DP DSC configurations that require 3 DSC engines per pipe Signed-off-by: Dave Airlie <airlied@redhat.com> From: Jani Nikula <jani.nikula@intel.com> Link: https://lore.kernel.org/r/87fri7p8tp.fsf@intel.com
2025-04-17Merge tag 'vfio-v6.15-rc3' of https://github.com/awilliam/linux-vfioLinus Torvalds
Pull vfio fix from Alex Williamson: - Include devices where the platform indicates PCI INTx is not routed by setting pdev->irq to zero in the expanded virtualization of the PCI pin register. This provides consistency in the INFO and SET_IRQS ioctls (Alex Williamson) * tag 'vfio-v6.15-rc3' of https://github.com/awilliam/linux-vfio: vfio/pci: Virtualize zero INTx PIN if no pdev->irq
2025-04-17Merge tag 'spi-fix-v6.15-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi fixes from Mark Brown: "A few more device specific fixes plus one trivial quirk. There's a couple of patches for Tegra which avoid some fairly spectacular log spam if the hardware breaks in ways which were actually seen in production, plus a fix for the i.MX driver to propagate errors properly when setting up the hardware. We also have a trivial patch marking the sun4i driver as being compatible with GPIO chip selects" * tag 'spi-fix-v6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: spi-imx: Add check for spi_imx_setupxfer() spi: tegra210-quad: add rate limiting and simplify timeout error message spi: tegra210-quad: use WARN_ON_ONCE instead of WARN_ON for timeouts spi: sun4i: add support for GPIO chip select lines
2025-04-17Merge tag 'net-6.15-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from Bluetooth, CAN and Netfilter. Current release - regressions: - two fixes for the netdev per-instance locking - batman-adv: fix double-hold of meshif when getting enabled Current release - new code bugs: - Bluetooth: increment TX timestamping tskey always for stream sockets - wifi: static analysis and build fixes for the new Intel sub-driver Previous releases - regressions: - net: fib_rules: fix iif / oif matching on L3 master (VRF) device - ipv6: add exception routes to GC list in rt6_insert_exception() - netfilter: conntrack: fix erroneous removal of offload bit - Bluetooth: - fix sending MGMT_EV_DEVICE_FOUND for invalid address - l2cap: process valid commands in too long frame - btnxpuart: Revert baudrate change in nxp_shutdown Previous releases - always broken: - ethtool: fix memory corruption during SFP FW flashing - eth: - hibmcge: fixes for link and MTU handling, pause frames etc - igc: fixes for PTM (PCIe timestamping) - dsa: b53: enable BPDU reception for management port Misc: - fixes for Netlink protocol schemas" * tag 'net-6.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (81 commits) net: ethernet: mtk_eth_soc: revise QDMA packet scheduler settings net: ethernet: mtk_eth_soc: correct the max weight of the queue limit for 100Mbps net: ethernet: mtk_eth_soc: reapply mdc divider on reset net: ti: icss-iep: Fix possible NULL pointer dereference for perout request net: ti: icssg-prueth: Fix possible NULL pointer dereference inside emac_xmit_xdp_frame() net: ti: icssg-prueth: Fix kernel warning while bringing down network interface netfilter: conntrack: fix erronous removal of offload bit net: don't try to ops lock uninitialized devs ptp: ocp: fix start time alignment in ptp_ocp_signal_set net: dsa: avoid refcount warnings when ds->ops->tag_8021q_vlan_del() fails net: dsa: free routing table on probe failure net: dsa: clean up FDB, MDB, VLAN entries on unbind net: dsa: mv88e6xxx: fix -ENOENT when deleting VLANs and MST is unsupported net: dsa: mv88e6xxx: avoid unregistering devlink regions which were never registered net: txgbe: fix memory leak in txgbe_probe() error path net: bridge: switchdev: do not notify new brentries as changed net: b53: enable BPDU reception for management port netlink: specs: rt-neigh: prefix struct nfmsg members with ndm netlink: specs: rt-link: adjust mctp attribute naming netlink: specs: rtnetlink: attribute naming corrections ...
2025-04-17Merge tag 'for-linus-fwctl' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma Pull fwctl fixes from Jason Gunthorpe: "Three small changes from further build testing: - Don't rely on the userspace uuid.h for the uapi header - Fix sparse warnings in pds - Typo in log message" * tag 'for-linus-fwctl' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: fwctl: Fix repeated device word in log message pds_fwctl: Fix type and endian complaints fwctl/cxl: Fix uuid_t usage in uapi
2025-04-17Merge tag 'sound-6.15-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "A collection of small fixes. All are device-specific like quirks, new IDs, and other safe (or rather boring) changes" * tag 'sound-6.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: firmware: cs_dsp: test_bin_error: Fix uninitialized data used as fw version ASoC: codecs: Add of_match_table for aw888081 driver ASoC: fsl: fsl_qmc_audio: Reset audio data pointers on TRIGGER_START event mailmap: Add entry for Srinivas Kandagatla MAINTAINERS: use kernel.org alias ASoC: cs42l43: Reset clamp override on jack removal ALSA: hda/realtek - Fixed ASUS platform headset Mic issue ALSA: hda/cirrus_scodec_test: Don't select dependencies ALSA: azt2320: Replace deprecated strcpy() with strscpy() ASoC: hdmi-codec: use RTD ID instead of DAI ID for ELD entry ASoC: Intel: avs: Constrain path based on BE capabilities ALSA: hda/tas2781: Remove unnecessary NULL check before release_firmware() ASoC: Intel: avs: Fix null-ptr-deref in avs_component_probe() ASoC: fsl_asrc_dma: get codec or cpu dai from backend ASoC: qcom: Fix sc7280 lpass potential buffer overflow ASoC: dwc: always enable/disable i2s irqs ASoC: Intel: sof_sdw: Add quirk for Asus Zenbook S16 ASoC: codecs:lpass-wsa-macro: Fix logic of enabling vi channels ASoC: codecs:lpass-wsa-macro: Fix vi feedback rate
2025-04-17Merge tag 'platform-drivers-x86-v6.15-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform drivers fixes from Ilpo Järvinen: "Fixes: - amd/pmf: Fix STT limits - asus-laptop: Fix an uninitialized variable - intel_pmc_ipc: Allow building without ACPI - mlxbf-bootctl: Use sysfs_emit_at() in secure_boot_fuse_state_show() - msi-wmi-platform: Add locking to workaround ACPI firmware bug New HW support: - alienware-wmi-wmax: - Extended thermal control support to: - Alienware Area-51m R2 - Alienware m16 R1 - Alienware m16 R2 - Dell G16 7630 - Dell G5 5505 SE - G-Mode support to Alienware m16 R1 - x86-android-tablets: Add Vexia Edu Atla 10 tablet 5V data" * tag 'platform-drivers-x86-v6.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: platform/x86: msi-wmi-platform: Workaround a ACPI firmware bug platform/x86: msi-wmi-platform: Rename "data" variable platform/x86: alienware-wmi-wmax: Extend support to more laptops platform/x86: alienware-wmi-wmax: Add G-Mode support to Alienware m16 R1 platform/x86: amd: pmf: Fix STT limits mlxbf-bootctl: use sysfs_emit_at() in secure_boot_fuse_state_show() platform/x86: x86-android-tablets: Add Vexia Edu Atla 10 tablet 5V data platform/x86: x86-android-tablets: Add "9v" to Vexia EDU ATLA 10 tablet symbols asus-laptop: Fix an uninitialized variable platform/x86: intel_pmc_ipc: add option to build without ACPI
2025-04-17Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Small drivers fixes, except for ufs which has two large updates, one for exposing the device level feature, which is a new addition to the device spec and the other reworking the exynos driver to fix coherence issues on some android phones" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: megaraid_sas: Driver version update to 07.734.00.00-rc1 scsi: megaraid_sas: Block zero-length ATA VPD inquiry scsi: scsi_transport_srp: Replace min/max nesting with clamp() scsi: ufs: core: Add device level exception support scsi: ufs: core: Rename ufshcd_wb_presrv_usrspc_keep_vcc_on() scsi: smartpqi: Use is_kdump_kernel() to check for kdump scsi: pm80xx: Set phy_attached to zero when device is gone scsi: ufs: exynos: gs101: Put UFS device in reset on .suspend() scsi: ufs: exynos: Move phy calls to .exit() callback scsi: ufs: exynos: Enable PRDT pre-fetching with UFSHCD_CAP_CRYPTO scsi: ufs: exynos: Ensure consistent phy reference counts scsi: ufs: exynos: Disable iocc if dma-coherent property isn't set scsi: ufs: exynos: Move UFS shareability value to drvdata scsi: ufs: exynos: Ensure pre_link() executes before exynos_ufs_phy_init() scsi: iscsi: Fix missing scsi_host_put() in error path scsi: ufs: core: Fix a race condition related to device commands scsi: hisi_sas: Fix I/O errors caused by hardware port ID changes scsi: hisi_sas: Enable force phy when SATA disk directly connected
2025-04-17Merge tag 'ata-6.15-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux Pull ata fix from Damien Le Moal: - Fix how sense data from the sense data for successfull NCQ commands log page is used to fully initialize the result_tf of a completed command, so that the sense data returned to the scsi layer is fully initialized with all the device provided information (from Niklas) * tag 'ata-6.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux: ata: libata-sata: Save all fields from sense data descriptor
2025-04-17Merge tag 'amd-pstate-v6.15-2025-04-15' of ↵Rafael J. Wysocki
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux Merge amd-pstate content for 6.15 (4/15/25) from Mario Limonciello: "Add a fix for X3D processors where depending upon what BIOS was set initially rankings might be set improperly. Add a fix for changing min/max limits while on the performance governor." * tag 'amd-pstate-v6.15-2025-04-15' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux: cpufreq/amd-pstate: Enable ITMT support after initializing core rankings cpufreq/amd-pstate: Fix min_limit perf and freq updation for performance governor
2025-04-17cpufreq: Avoid using inconsistent policy->min and policy->maxRafael J. Wysocki
Since cpufreq_driver_resolve_freq() can run in parallel with cpufreq_set_policy() and there is no synchronization between them, the former may access policy->min and policy->max while the latter is updating them and it may see intermediate values of them due to the way the update is carried out. Also the compiler is free to apply any optimizations it wants both to the stores in cpufreq_set_policy() and to the loads in cpufreq_driver_resolve_freq() which may result in additional inconsistencies. To address this, use WRITE_ONCE() when updating policy->min and policy->max in cpufreq_set_policy() and use READ_ONCE() for reading them in cpufreq_driver_resolve_freq(). Moreover, rearrange the update in cpufreq_set_policy() to avoid storing intermediate values in policy->min and policy->max with the help of the observation that their new values are expected to be properly ordered upfront. Also modify cpufreq_driver_resolve_freq() to take the possible reverse ordering of policy->min and policy->max, which may happen depending on the ordering of operations when this function and cpufreq_set_policy() run concurrently, into account by always honoring the max when it turns out to be less than the min (in case it comes from thermal throttling or similar). Fixes: 151717690694 ("cpufreq: Make policy min/max hard requirements") Cc: 5.16+ <stable@vger.kernel.org> # 5.16+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Christian Loehle <christian.loehle@arm.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Link: https://patch.msgid.link/5907080.DvuYhMxLoT@rjwysocki.net
2025-04-17net: ethernet: mtk_eth_soc: revise QDMA packet scheduler settingsBo-Cun Chen
The QDMA packet scheduler suffers from a performance issue. Fix this by picking up changes from MediaTek's SDK which change to use Token Bucket instead of Leaky Bucket and fix the SPEED_1000 configuration. Fixes: 160d3a9b1929 ("net: ethernet: mtk_eth_soc: introduce MTK_NETSYS_V2 support") Signed-off-by: Bo-Cun Chen <bc-bocun.chen@mediatek.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org> Link: https://patch.msgid.link/18040f60f9e2f5855036b75b28c4332a2d2ebdd8.1744764277.git.daniel@makrotopia.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-17net: ethernet: mtk_eth_soc: correct the max weight of the queue limit for ↵Bo-Cun Chen
100Mbps Without this patch, the maximum weight of the queue limit will be incorrect when linked at 100Mbps due to an apparent typo. Fixes: f63959c7eec31 ("net: ethernet: mtk_eth_soc: implement multi-queue support for per-port queues") Signed-off-by: Bo-Cun Chen <bc-bocun.chen@mediatek.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org> Link: https://patch.msgid.link/74111ba0bdb13743313999ed467ce564e8189006.1744764277.git.daniel@makrotopia.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-17net: ethernet: mtk_eth_soc: reapply mdc divider on resetBo-Cun Chen
In the current method, the MDC divider was reset to the default setting of 2.5MHz after the NETSYS SER. Therefore, we need to reapply the MDC divider configuration function in mtk_hw_init() after reset. Fixes: c0a440031d431 ("net: ethernet: mtk_eth_soc: set MDIO bus clock frequency") Signed-off-by: Bo-Cun Chen <bc-bocun.chen@mediatek.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org> Link: https://patch.msgid.link/8ab7381447e6cdcb317d5b5a6ddd90a1734efcb0.1744764277.git.daniel@makrotopia.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-17Merge tag 'nvme-6.15-2025-04-17' of git://git.infradead.org/nvme into block-6.15Jens Axboe
Pull NVMe fixes from Christoph: "nvme fixes for Linux 6.15 - fix scan failure for non-ANA multipath controllers (Hannes Reinecke) - fix multipath sysfs links creation for some cases (Hannes Reinecke) - PCIe endpoint fixes (Damien Le Moal) - use NULL instead of 0 in the auth code (Damien Le Moal)" * tag 'nvme-6.15-2025-04-17' of git://git.infradead.org/nvme: nvmet: pci-epf: cleanup link state management nvmet: pci-epf: clear CC and CSTS when disabling the controller nvmet: pci-epf: always fully initialize completion entries nvmet: auth: use NULL to clear a pointer in nvmet_auth_sq_free() nvme-multipath: sysfs links may not be created for devices nvme: fixup scan failure for non-ANA multipath controllers
2025-04-17spi: spi-imx: Add check for spi_imx_setupxfer()Tamura Dai
Add check for the return value of spi_imx_setupxfer(). spi_imx->rx and spi_imx->tx function pointer can be NULL when spi_imx_setupxfer() return error, and make NULL pointer dereference. Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 Call trace: 0x0 spi_imx_pio_transfer+0x50/0xd8 spi_imx_transfer_one+0x18c/0x858 spi_transfer_one_message+0x43c/0x790 __spi_pump_transfer_message+0x238/0x5d4 __spi_sync+0x2b0/0x454 spi_write_then_read+0x11c/0x200 Signed-off-by: Tamura Dai <kirinode0@gmail.com> Reviewed-by: Carlos Song <carlos.song@nxp.com> Link: https://patch.msgid.link/20250417011700.14436-1-kirinode0@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2025-04-17Merge tag 'for-net-2025-04-16' of ↵Paolo Abeni
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth Luiz Augusto von Dentz says: ==================== bluetooth pull request for net: - l2cap: Process valid commands in too long frame - vhci: Avoid needless snprintf() calls * tag 'for-net-2025-04-16' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth: Bluetooth: vhci: Avoid needless snprintf() calls Bluetooth: l2cap: Process valid commands in too long frame ==================== Link: https://patch.msgid.link/20250416210126.2034212-1-luiz.dentz@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-04-17net: ti: icss-iep: Fix possible NULL pointer dereference for perout requestMeghana Malladi
The ICSS IEP driver tracks perout and pps enable state with flags. Currently when disabling pps and perout signals during icss_iep_exit(), results in NULL pointer dereference for perout. To fix the null pointer dereference issue, the icss_iep_perout_enable_hw function can be modified to directly clear the IEP CMP registers when disabling PPS or PEROUT, without referencing the ptp_perout_request structure, as its contents are irrelevant in this case. Fixes: 9b115361248d ("net: ti: icssg-prueth: Fix clearing of IEP_CMP_CFG registers during iep_init") Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/all/7b1c7c36-363a-4085-b26c-4f210bee1df6@stanley.mountain/ Signed-off-by: Meghana Malladi <m-malladi@ti.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20250415090543.717991-4-m-malladi@ti.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-04-17net: ti: icssg-prueth: Fix possible NULL pointer dereference inside ↵Meghana Malladi
emac_xmit_xdp_frame() There is an error check inside emac_xmit_xdp_frame() function which is called when the driver wants to transmit XDP frame, to check if the allocated tx descriptor is NULL, if true to exit and return ICSSG_XDP_CONSUMED implying failure in transmission. In this case trying to free a descriptor which is NULL will result in kernel crash due to NULL pointer dereference. Fix this error handling and increase netdev tx_dropped stats in the caller of this function if the function returns ICSSG_XDP_CONSUMED. Fixes: 62aa3246f462 ("net: ti: icssg-prueth: Add XDP support") Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/all/70d8dd76-0c76-42fc-8611-9884937c82f5@stanley.mountain/ Signed-off-by: Meghana Malladi <m-malladi@ti.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Roger Quadros <rogerq@kernel.org> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20250415090543.717991-3-m-malladi@ti.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-04-17net: ti: icssg-prueth: Fix kernel warning while bringing down network interfaceMeghana Malladi
During network interface initialization, the NIC driver needs to register its Rx queue with the XDP, to ensure the incoming XDP buffer carries a pointer reference to this info and is stored inside xdp_rxq_info. While this struct isn't tied to XDP prog, if there are any changes in Rx queue, the NIC driver needs to stop the Rx queue by unregistering with XDP before purging and reallocating memory. Drop page_pool destroy during Rx channel reset as this is already handled by XDP during xdp_rxq_info_unreg (Rx queue unregister), failing to do will cause the following warning: warning logs: https://gist.github.com/MeghanaMalladiTI/eb627e5dc8de24e42d7d46572c13e576 Fixes: 46eeb90f03e0 ("net: ti: icssg-prueth: Use page_pool API for RX buffer allocation") Signed-off-by: Meghana Malladi <m-malladi@ti.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Roger Quadros <rogerq@kernel.org> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20250415090543.717991-2-m-malladi@ti.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-04-17cpufreq: fix compile-test defaultsJohan Hovold
Commit 3f66425a4fc8 ("cpufreq: Enable COMPILE_TEST on Arm drivers") enabled compile testing of most Arm CPUFreq drivers but left the existing default values unchanged so that many drivers are enabled by default whenever COMPILE_TEST is selected. This specifically results in the S3C64XX CPUFreq driver being enabled and initialised during boot of non-S3C64XX platforms with the following error logged: cpufreq: Unable to obtain ARMCLK: -2 Commit d4f610a9bafd ("cpufreq: Do not enable by default during compile testing") recently fixed most of the default values, but two entries were missed and two could use a more specific default condition. Fix the default values for drivers that can be compile tested and that should be enabled by default when not compile testing. Fixes: 3f66425a4fc8 ("cpufreq: Enable COMPILE_TEST on Arm drivers") Cc: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2025-04-17drm/mgag200: Fix value in <VBLKSTR> registerThomas Zimmermann
Fix an off-by-one error when setting the vblanking start in <VBLKSTR>. Commit d6460bd52c27 ("drm/mgag200: Add dedicated variables for blanking fields") switched the value from crtc_vdisplay to crtc_vblank_start, which DRM helpers copy from the former. The commit missed to subtract one though. Reported-by: Wakko Warner <wakko@animx.eu.org> Closes: https://lore.kernel.org/dri-devel/CAMwc25rKPKooaSp85zDq2eh-9q4UPZD=RqSDBRp1fAagDnmRmA@mail.gmail.com/ Reported-by: Сергей <afmerlord@gmail.com> Closes: https://lore.kernel.org/all/5b193b75-40b1-4342-a16a-ae9fc62f245a@gmail.com/ Closes: https://bbs.archlinux.org/viewtopic.php?id=303819 Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Fixes: d6460bd52c27 ("drm/mgag200: Add dedicated variables for blanking fields") Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Jocelyn Falempe <jfalempe@redhat.com> Cc: Dave Airlie <airlied@redhat.com> Cc: dri-devel@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v6.12+ Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Tested-by: Wakko Warner <wakko@animx.eu.org> Link: https://lore.kernel.org/r/20250416083847.51764-1-tzimmermann@suse.de
2025-04-16Merge tag 'md-6.15-20250416' of ↵Jens Axboe
https://git.kernel.org/pub/scm/linux/kernel/git/mdraid/linux into block-6.15 Pull MD fixes from Yu: "- fix raid10 missing discard IO accounting (Yu Kuai) - fix bitmap stats for bitmap file (Zheng Qixing) - fix oops while reading all member disks failed during check/repair (Meir Elisha)" * tag 'md-6.15-20250416' of https://git.kernel.org/pub/scm/linux/kernel/git/mdraid/linux: md/raid1: Add check for missing source disk in process_checks() md/md-bitmap: fix stats collection for external bitmaps md/raid10: fix missing discard IO accounting
2025-04-16Merge tag 'mm-hotfixes-stable-2025-04-16-19-59' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull misc hotfixes from Andrew Morton: "31 hotfixes. 9 are cc:stable and the remainder address post-6.15 issues or aren't considered necessary for -stable kernels. 22 patches are for MM, 9 are otherwise" * tag 'mm-hotfixes-stable-2025-04-16-19-59' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (31 commits) MAINTAINERS: update HUGETLB reviewers mm: fix apply_to_existing_page_range() selftests/mm: fix compiler -Wmaybe-uninitialized warning alloc_tag: handle incomplete bulk allocations in vm_module_tags_populate mailmap: add entry for Jean-Michel Hautbois mm: (un)track_pfn_copy() fix + doc improvements mm: fix filemap_get_folios_contig returning batches of identical folios mm/hugetlb: add a line break at the end of the format string selftests: mincore: fix tmpfs mincore test failure mm/hugetlb: fix set_max_huge_pages() when there are surplus pages mm/cma: report base address of single range correctly mm: page_alloc: speed up fallbacks in rmqueue_bulk() kunit: slub: add module description mm/kasan: add module decription ucs2_string: add module description zlib: add module description fpga: tests: add module descriptions samples/livepatch: add module descriptions ASN.1: add module description mm/vma: add give_up_on_oom option on modify/merge, use in uffd release ...
2025-04-16ublk: simplify aborting ublk requestMing Lei
Now ublk_abort_queue() is moved to ublk char device release handler, meantime our request queue is "quiesced" because either ->canceling was set from uring_cmd cancel function or all IOs are inflight and can't be completed by ublk server, things becomes easy much: - all uring_cmd are done, so we needn't to mark io as UBLK_IO_FLAG_ABORTED for handling completion from uring_cmd - ublk char device is closed, no one can hold IO request reference any more, so we can simply complete this request or requeue it for ublk_nosrv_should_reissue_outstanding. Reviewed-by: Uday Shankar <ushankar@purestorage.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20250416035444.99569-8-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-04-16ublk: remove __ublk_quiesce_dev()Ming Lei
Remove __ublk_quiesce_dev() and open code for updating device state as QUIESCED. We needn't to drain inflight requests in __ublk_quiesce_dev() any more, because all inflight requests are aborted in ublk char device release handler. Also we needn't to set ->canceling in __ublk_quiesce_dev() any more because it is done unconditionally now in ublk_ch_release(). Reviewed-by: Uday Shankar <ushankar@purestorage.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20250416035444.99569-7-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-04-16ublk: improve detection and handling of ublk server exitUday Shankar
There are currently two ways in which ublk server exit is detected by ublk_drv: 1. uring_cmd cancellation. If there are any outstanding uring_cmds which have not been completed to the ublk server when it exits, io_uring calls the uring_cmd callback with a special cancellation flag as the issuing task is exiting. 2. I/O timeout. This is needed in addition to the above to handle the "saturated queue" case, when all I/Os for a given queue are in the ublk server, and therefore there are no outstanding uring_cmds to cancel when the ublk server exits. There are a couple of issues with this approach: - It is complex and inelegant to have two methods to detect the same condition - The second method detects ublk server exit only after a long delay (~30s, the default timeout assigned by the block layer). This delays the nosrv behavior from kicking in and potential subsequent recovery of the device. The second issue is brought to light with the new test_generic_06 which will be added in following patch. It fails before this fix: selftests: ublk: test_generic_06.sh dev id is 0 dd: error writing '/dev/ublkb0': Input/output error 1+0 records in 0+0 records out 0 bytes copied, 30.0611 s, 0.0 kB/s DEAD dd took 31 seconds to exit (>= 5s tolerance)! generic_06 : [FAIL] Fix this by instead detecting and handling ublk server exit in the character file release callback. This has several advantages: - This one place can handle both saturated and unsaturated queues. Thus, it replaces both preexisting methods of detecting ublk server exit. - It runs quickly on ublk server exit - there is no 30s delay. - It starts the process of removing task references in ublk_drv. This is needed if we want to relax restrictions in the driver like letting only one thread serve each queue There is also the disadvantage that the character file release callback can also be triggered by intentional close of the file, which is a significant behavior change. Preexisting ublk servers (libublksrv) are dependent on the ability to open/close the file multiple times. To address this, only transition to a nosrv state if the file is released while the ublk device is live. This allows for programs to open/close the file multiple times during setup. It is still a behavior change if a ublk server decides to close/reopen the file while the device is LIVE (i.e. while it is responsible for serving I/O), but that would be highly unusual. This behavior is in line with what is done by FUSE, which is very similar to ublk in that a userspace daemon is providing services traditionally provided by the kernel. With this change in, the new test (and all other selftests, and all ublksrv tests) pass: selftests: ublk: test_generic_06.sh dev id is 0 dd: error writing '/dev/ublkb0': Input/output error 1+0 records in 0+0 records out 0 bytes copied, 0.0376731 s, 0.0 kB/s DEAD generic_04 : [PASS] Signed-off-by: Uday Shankar <ushankar@purestorage.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20250416035444.99569-6-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-04-16ublk: move device reset into ublk_ch_release()Ming Lei
ublk_ch_release() is called after ublk char device is closed, when all uring_cmd are done, so it is perfect fine to move ublk device reset to ublk_ch_release() from ublk_ctrl_start_recovery(). This way can avoid to grab the exiting daemon task_struct too long. However, reset of the following ublk IO flags has to be moved until ublk io_uring queues are ready: - ubq->canceling For requeuing IO in case of ublk_nosrv_dev_should_queue_io() before device is recovered - ubq->fail_io For failing IO in case of UBLK_F_USER_RECOVERY_FAIL_IO before device is recovered - ublk_io->flags For preventing using io->cmd With this way, recovery is simplified a lot. Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20250416035444.99569-5-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-04-16ublk: rely on ->canceling for dealing with ublk_nosrv_dev_should_queue_ioMing Lei
Now ublk deals with ublk_nosrv_dev_should_queue_io() by keeping request queue as quiesced. This way is fragile because queue quiesce crosses syscalls or process contexts. Switch to rely on ubq->canceling for dealing with ublk_nosrv_dev_should_queue_io(), because it has been used for this purpose during io_uring context exiting, and it can be reused before recovering too. In ublk_queue_rq(), the request will be added to requeue list without kicking off requeue in case of ubq->canceling, and finally requests added in requeue list will be dispatched from either ublk_stop_dev() or ublk_ctrl_end_recovery(). Meantime we have to move reset of ubq->canceling from ublk_ctrl_start_recovery() to ublk_ctrl_end_recovery(), when IO handling can be recovered completely. Then blk_mq_quiesce_queue() and blk_mq_unquiesce_queue() are always used in same context. Signed-off-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Uday Shankar <ushankar@purestorage.com> Link: https://lore.kernel.org/r/20250416035444.99569-4-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-04-16ublk: add ublk_force_abort_dev()Ming Lei
Add ublk_force_abort_dev() for handling ublk_nosrv_dev_should_queue_io() in ublk_stop_dev(). Then queue quiesce and unquiesce can be paired in single function. Meantime not change device state to QUIESCED any more, since the disk is going to be removed soon. Reviewed-by: Uday Shankar <ushankar@purestorage.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20250416035444.99569-3-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-04-16ublk: properly serialize all FETCH_REQsUday Shankar
Most uring_cmds issued against ublk character devices are serialized because each command affects only one queue, and there is an early check which only allows a single task (the queue's ubq_daemon) to issue uring_cmds against that queue. However, this mechanism does not work for FETCH_REQs, since they are expected before ubq_daemon is set. Since FETCH_REQs are only used at initialization and not in the fast path, serialize them using the per-ublk-device mutex. This fixes a number of data races that were previously possible if a badly behaved ublk server decided to issue multiple FETCH_REQs against the same qid/tag concurrently. Reported-by: Caleb Sander Mateos <csander@purestorage.com> Signed-off-by: Uday Shankar <ushankar@purestorage.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20250416035444.99569-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-04-16ptp: ocp: fix start time alignment in ptp_ocp_signal_setSagi Maimon
In ptp_ocp_signal_set, the start time for periodic signals is not aligned to the next period boundary. The current code rounds up the start time and divides by the period but fails to multiply back by the period, causing misaligned signal starts. Fix this by multiplying the rounded-up value by the period to ensure the start time is the closest next period. Fixes: 4bd46bb037f8e ("ptp: ocp: Use DIV64_U64_ROUND_UP for rounding.") Signed-off-by: Sagi Maimon <maimon.sagi@gmail.com> Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Link: https://patch.msgid.link/20250415053131.129413-1-maimon.sagi@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-16net: dsa: mv88e6xxx: fix -ENOENT when deleting VLANs and MST is unsupportedVladimir Oltean
Russell King reports that on the ZII dev rev B, deleting a bridge VLAN from a user port fails with -ENOENT: https://lore.kernel.org/netdev/Z_lQXNP0s5-IiJzd@shell.armlinux.org.uk/ This comes from mv88e6xxx_port_vlan_leave() -> mv88e6xxx_mst_put(), which tries to find an MST entry in &chip->msts associated with the SID, but fails and returns -ENOENT as such. But we know that this chip does not support MST at all, so that is not surprising. The question is why does the guard in mv88e6xxx_mst_put() not exit early: if (!sid) return 0; And the answer seems to be simple: the sid comes from vlan.sid which supposedly was previously populated by mv88e6xxx_vtu_get(). But some chip->info->ops->vtu_getnext() implementations do not populate vlan.sid, for example see mv88e6185_g1_vtu_getnext(). In that case, later in mv88e6xxx_port_vlan_leave() we are using a garbage sid which is just residual stack memory. Testing for sid == 0 covers all cases of a non-bridge VLAN or a bridge VLAN mapped to the default MSTI. For some chips, SID 0 is valid and installed by mv88e6xxx_stu_setup(). A chip which does not support the STU would implicitly only support mapping all VLANs to the default MSTI, so although SID 0 is not valid, it would be sufficient, if we were to zero-initialize the vlan structure, to fix the bug, due to the coincidence that a test for vlan.sid == 0 already exists and leads to the same (correct) behavior. Another option which would be sufficient would be to add a test for mv88e6xxx_has_stu() inside mv88e6xxx_mst_put(), symmetric to the one which already exists in mv88e6xxx_mst_get(). But that placement means the caller will have to dereference vlan.sid, which means it will access uninitialized memory, which is not nice even if it ignores it later. So we end up making both modifications, in order to not rely just on the sid == 0 coincidence, but also to avoid having uninitialized structure fields which might get temporarily accessed. Fixes: acaf4d2e36b3 ("net: dsa: mv88e6xxx: MST Offloading") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://patch.msgid.link/20250414212913.2955253-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-16net: dsa: mv88e6xxx: avoid unregistering devlink regions which were never ↵Vladimir Oltean
registered Russell King reports that a system with mv88e6xxx dereferences a NULL pointer when unbinding this driver: https://lore.kernel.org/netdev/Z_lRkMlTJ1KQ0kVX@shell.armlinux.org.uk/ The crash seems to be in devlink_region_destroy(), which is not NULL tolerant but is given a NULL devlink global region pointer. At least on some chips, some devlink regions are conditionally registered since the blamed commit, see mv88e6xxx_setup_devlink_regions_global(): if (cond && !cond(chip)) continue; These are MV88E6XXX_REGION_STU and MV88E6XXX_REGION_PVT. If the chip does not have an STU or PVT, it should crash like this. To fix the issue, avoid unregistering those regions which are NULL, i.e. were skipped at mv88e6xxx_setup_devlink_regions_global() time. Fixes: 836021a2d0e0 ("net: dsa: mv88e6xxx: Export cross-chip PVT as devlink region") Tested-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://patch.msgid.link/20250414212850.2953957-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-16net: txgbe: fix memory leak in txgbe_probe() error pathAbdun Nihaal
When txgbe_sw_init() is called, memory is allocated for wx->rss_key in wx_init_rss_key(). However, in txgbe_probe() function, the subsequent error paths after txgbe_sw_init() don't free the rss_key. Fix that by freeing it in error path along with wx->mac_table. Also change the label to which execution jumps when txgbe_sw_init() fails, because otherwise, it could lead to a double free for rss_key, when the mac_table allocation fails in wx_sw_init(). Fixes: 937d46ecc5f9 ("net: wangxun: add ethtool_ops for channel number") Reported-by: Jiawen Wu <jiawenwu@trustnetic.com> Signed-off-by: Abdun Nihaal <abdun.nihaal@gmail.com> Reviewed-by: Jiawen Wu <jiawenwu@trustnetic.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250415032910.13139-1-abdun.nihaal@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-16net: b53: enable BPDU reception for management portJonas Gorski
For STP to work, receiving BPDUs is essential, but the appropriate bit was never set. Without GC_RX_BPDU_EN, the switch chip will filter all BPDUs, even if an appropriate PVID VLAN was setup. Fixes: ff39c2d68679 ("net: dsa: b53: Add bridge support") Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Link: https://patch.msgid.link/20250414200434.194422-1-jonas.gorski@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-16cxgb4: fix memory leak in cxgb4_init_ethtool_filters() error pathAbdun Nihaal
In the for loop used to allocate the loc_array and bmap for each port, a memory leak is possible when the allocation for loc_array succeeds, but the allocation for bmap fails. This is because when the control flow goes to the label free_eth_finfo, only the allocations starting from (i-1)th iteration are freed. Fix that by freeing the loc_array in the bmap allocation error path. Fixes: d915c299f1da ("cxgb4: add skeleton for ethtool n-tuple filters") Signed-off-by: Abdun Nihaal <abdun.nihaal@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20250414170649.89156-1-abdun.nihaal@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-11 22:28:53 +0000