| Age | Commit message (Collapse) | Author |
|---|
|
Pull drm fixes from Dave Airlie:
"Weekly fixes, feels a bit big.
The major piece is msm fixes, then the usual amdgpu/xe along with some
mediatek and nouveau fixes and a tegra revert.
gpuvm:
- fix some typos
xe:
- Fix user-fence race issue
- Couple xe_vm fixes
- Don't trigger rebind on initial dma-buf validation
- Fix a build issue related to basename() posix vs gnu discrepancy
amdgpu:
- pin buffers while vmapping
- UserQ fixes
- Revert CSA fix
- SR-IOV fix
nouveau:
- fix linear modifier
- remove some dead code
msm:
- Core/GPU:
- fix comment doc warning in gpuvm
- fix build with KMS disabled
- fix pgtable setup/teardown race
- global fault counter fix
- various error path fixes
- GPU devcoredump snapshot fixes
- handle in-place VM_BIND remaps to solve turnip vm update race
- skip re-emitting IBs for unusable VMs
- Don't use %pK through printk
- moved display snapshot init earlier, fixing a crash
- DPU:
- Fixed crash in virtual plane checking code
- Fixed mode comparison in virtual plane checking code
- DSI:
- Adjusted width of resulution-related registers
- Fixed locking issue on 14nm PLLs
- UBWC (per Bjorn's ack)
- Added UBWC configuration for several missing platforms (fixing
regression)
mediatek:
- Add error handling for old state CRTC in atomic_disable
- Fix DSI host and panel bridge pre-enable order
- Fix device/node reference count leaks in mtk_drm_get_all_drm_priv
- mtk_hdmi: Fix inverted parameters in some regmap_update_bits calls
tegra:
- revert dma-buf change"
* tag 'drm-fixes-2025-08-29' of https://gitlab.freedesktop.org/drm/kernel: (56 commits)
drm/mediatek: mtk_hdmi: Fix inverted parameters in some regmap_update_bits calls
drm/amdgpu/userq: fix error handling of invalid doorbell
drm/amdgpu: update firmware version checks for user queue support
drm/amd/amdgpu: disable hwmon power1_cap* for gfx 11.0.3 on vf mode
Revert "drm/amdgpu: fix incorrect vm flags to map bo"
drm/amdgpu/gfx12: set MQD as appriopriate for queue types
drm/amdgpu/gfx11: set MQD as appriopriate for queue types
drm/xe: switch to local xbasename() helper
drm/xe: Don't trigger rebind on initial dma-buf validation
drm/xe/vm: Clear the scratch_pt pointer on error
drm/xe/vm: Don't pin the vm_resv during validation
drm/xe/xe_sync: avoid race during ufence signaling
Revert "drm/tegra: Use dma_buf from GEM object instance"
soc: qcom: use no-UBWC config for MSM8956/76
soc: qcom: add configuration for MSM8929
soc: qcom: ubwc: add more missing platforms
soc: qcom: ubwc: use no-uwbc config for MSM8917
drm/msm/dpu: Add a null ptr check for dpu_encoder_needs_modeset
dt-bindings: display/msm: qcom,mdp5: drop lut clock
drm/gpuvm: fix various typos in .c and .h gpuvm file
...
|
|
Pull block fixes from Jens Axboe:
- Fix a lockdep spotted issue on recursive locking for zoned writes, in
case of errors
- Update bcache MAINTAINERS entry address for Coly
- Fix for a ublk release issue, with selftests
- Fix for a regression introduced in this cycle, where it assumed
q->rq_qos was always set if the bio flag indicated that
- Fix for a regression introduced in this cycle, where loop retrieving
block device sizes got broken
* tag 'block-6.17-20250828' of git://git.kernel.dk/linux:
bcache: change maintainer's email address
ublk selftests: add --no_ublk_fixed_fd for not using registered ublk char device
ublk: avoid ublk_io_release() called after ublk char dev is closed
block: validate QoS before calling __rq_qos_done_bio()
blk-zoned: Fix a lockdep complaint about recursive locking
loop: fix zero sized loop for block special file
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from Bluetooth.
Current release - regressions:
- ipv4: fix regression in local-broadcast routes
- vsock: fix error-handling regression introduced in v6.17-rc1
Previous releases - regressions:
- bluetooth:
- mark connection as closed during suspend disconnect
- fix set_local_name race condition
- eth:
- ice: fix NULL pointer dereference on reset
- mlx5: fix memory leak in hws_pool_buddy_init error path
- bnxt_en: fix stats context reservation logic
- hv: fix loss of receive events from host during channel open
Previous releases - always broken:
- page_pool: fix incorrect mp_ops error handling
- sctp: initialize more fields in sctp_v6_from_sk()
- eth:
- octeontx2-vf: fix max packet length errors
- idpf: fix Tx flow scheduling to avoid Tx timeouts
- bnxt_en: fix memory corruption during ifdown
- ice: fix incorrect counter for buffer allocation failures
- mlx5: fix lockdep assertion on sync reset unload event
- fbnic: fixup rtnl_lock and devl_lock handling
- xgmac: do not enable RX FIFO overflow interrupts
- phy: mscc: fix when PTP clock is register and unregister
Misc:
- add Telit Cinterion LE910C4-WWX new compositions"
* tag 'net-6.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (60 commits)
net: ipv4: fix regression in local-broadcast routes
net: macb: Disable clocks once
fbnic: Move phylink resume out of service_task and into open/close
fbnic: Fixup rtnl_lock and devl_lock handling related to mailbox code
net: rose: fix a typo in rose_clear_routes()
l2tp: do not use sock_hold() in pppol2tp_session_get_sock()
sctp: initialize more fields in sctp_v6_from_sk()
MAINTAINERS: rmnet: Update email addresses
net: rose: include node references in rose_neigh refcount
net: rose: convert 'use' field to refcount_t
net: rose: split remove and free operations in rose_remove_neigh()
net: hv_netvsc: fix loss of early receive events from host during channel open.
net: stmmac: Set CIC bit only for TX queues with COE
net: stmmac: xgmac: Correct supported speed modes
net: stmmac: xgmac: Do not enable RX FIFO Overflow interrupts
net/mlx5e: Set local Xoff after FW update
net/mlx5e: Update and set Xon/Xoff upon port speed set
net/mlx5e: Update and set Xon/Xoff upon MTU set
net/mlx5: Prevent flow steering mode changes in switchdev mode
net/mlx5: Nack sync reset when SFs are present
...
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-fixes
Mediatek DRM Fixes - 20250829
1. Add error handling for old state CRTC in atomic_disable
2. Fix DSI host and panel bridge pre-enable order
3. Fix device/node reference count leaks in mtk_drm_get_all_drm_priv
4. mtk_hdmi: Fix inverted parameters in some regmap_update_bits calls
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://lore.kernel.org/r/20250828234116.4960-1-chunkuang.hu@kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fix from Rafael Wysocki:
"Add missing locking annotations to two recently introduced
list_for_each_entry_rcu() loops in the core device suspend/resume
code (Johannes Berg)"
* tag 'pm-6.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: sleep: annotate RCU list iterations
|
|
In mtk_hdmi driver, a recent change replaced custom register access
function calls by regmap ones, but two replacements by regmap_update_bits
were done incorrectly, because original offset and mask parameters were
inverted, so fix them.
Fixes: d6e25b3590a0 ("drm/mediatek: hdmi: Use regmap instead of iomem for main registers")
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20250818-mt8173-fix-hdmi-issue-v1-1-55aff9b0295d@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
https://gitlab.freedesktop.org/drm/msm into drm-fixes
Fixes for v6.17-rc4
Core/GPU:
- fix comment doc warning in gpuvm
- fix build with KMS disabled
- fix pgtable setup/teardown race
- global fault counter fix
- various error path fixes
- GPU devcoredump snapshot fixes
- handle in-place VM_BIND remaps to solve turnip vm update race
- skip re-emitting IBs for unusable VMs
- Don't use %pK through printk
- moved display snapshot init earlier, fixing a crash
DPU:
- Fixed crash in virtual plane checking code
- Fixed mode comparison in virtual plane checking code
DSI:
- Adjusted width of resulution-related registers
- Fixed locking issue on 14nm PLLs
UBWC (per Bjorn's ack)
- Added UBWC configuration for several missing platforms (fixing
regression)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <rob.clark@oss.qualcomm.com>
Link: https://lore.kernel.org/r/CACSVV02+u1VW1dzuz6JWwVEfpgTj6Y-JXMH+vX43KsKTVsW+Yg@mail.gmail.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux
Pull dma-mapping fixes from Marek Szyprowski:
- another small fix for arm64 systems with memory encryption (Shanker
Donthineni)
- fix for arm32 systems with non-standard CMA configuration (Oreoluwa
Babatunde)
* tag 'dma-mapping-6.17-2025-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux:
dma/pool: Ensure DMA_DIRECT_REMAP allocations are decrypted
of: reserved_mem: Restructure call site for dma_contiguous_early_fixup()
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.17-2025-08-28:
amdgpu:
- UserQ fixes
- Revert CSA fix
- SR-IOV fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20250828173904.75850-1-alexander.deucher@amd.com
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
Several nouveau fixes to remove unused code, fix an error path and be
less restrictive with the formats it accepts. A fix for amdgpu to pin
vmapped dma-buf, and a revert for tegra for a regression in the dma-buf
/ GEM code.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://lore.kernel.org/r/20250828-hypersonic-colorful-squirrel-64f04b@houat
|
|
It turns out that the platform firmware on some models does not return
valid data when reading the bitmap of supported platform profiles.
This prevents the driver from loading on said models, even when the
platform profile interface itself works.
Fix this by stop using said bitmap until we have figured out how
the OEM software itself detects available platform profiles.
Tested-by: Lynne Megido <lynne@bune.city>
Reported-by: Lynne Megido <lynne@bune.city>
Closes: https://lore.kernel.org/platform-driver-x86/3f56e68f-85df-4c0a-982c-43f9d635be38@bune.city/
Fixes: 191e21f1a4c3 ("platform/x86: acer-wmi: use an ACPI bitmap to set the platform profile choices")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20250826204007.5088-1-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Add support for the Fn+P hotkey found on newer HP Victus (and probably
newer Omen) laptops. This hotkey is intended for use with Omen Gaming Hub
to change the performance profile (see [1]).
Pressing Fn+P under linux produced the following warning in dmesg:
> hp_wmi: Unknown event_id - 27 - 0x7
Implemented a handling for this event so that the hotkey cycles between the
platform profiles when triggered.
Tested on Victus 16-s1011nt (9Z791EA, MB 8C9C).
Changes in v2:
- Make the key just switches between platform profiles instead of
assigning a key event code.
- v1: https://lore.kernel.org/all/20250802213541.18791-2-edip@medip.dev/
[1]: https://jpcdn.it/img/adadf6c927ffeb75afd8038f95db400a.png
Signed-off-by: Edip Hazuri <edip@medip.dev>
Link: https://lore.kernel.org/r/20250814204529.18467-4-edip@medip.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Add Bartlett Lake P-core only product support to intel_pmc_core
driver. Bartlett Lake hybrid product reuses Raptor Lake model name
so it is already enabled.
Acked-by: Xi Pardee <xi.pardee@linux.intel.com>
Signed-off-by: Li Yifan <yifan2.li@intel.com>
Link: https://lore.kernel.org/r/20250826034550.2284738-1-yifan2.li@intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
asus_wmi_register_driver() may be called from multiple drivers
concurrently, which can lead to the racy list operations, eventually
corrupting the memory and hitting Oops on some ASUS machines.
Also, the error handling is missing, and it forgot to unregister ACPI
lps0 dev ops in the error case.
This patch covers those issues by introducing a simple mutex at
acpi_wmi_register_driver() & *_unregister_driver, and adding the
proper call of asus_s2idle_check_unregister() in the error path.
Fixes: feea7bd6b02d ("platform/x86: asus-wmi: Refactor Ally suspend/resume")
Link: https://bugzilla.suse.com/show_bug.cgi?id=1246924
Link: https://lore.kernel.org/07815053-0e31-4e8e-8049-b652c929323b@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20250827052441.23382-1-tiwai@suse.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Prevents instant wakeup ~1s after suspend.
It seems to be kernel/system dependent if the IRQ actually manages to wake
the system every time or if it gets ignored (and everything works as
expected).
Signed-off-by: Christoffer Sandberg <cs@tuxedo.de>
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250827131424.16436-1-wse@tuxedocomputers.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
* there is a dedicated "noise cancel" key in top row, between mic mute
and PrintScreen; it sends 0xCA when pressed by itself (mapped to F13),
0xCB with Fn (mapped to F14)
* Fn+f sends 0x9D; it is not documented in the manual, but some web
search results mention "asus intelligent performance"; mapped to FN_F
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Link: https://lore.kernel.org/r/20250827152954.4844-1-anton@khirnov.net
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
When running test_stress_04.sh, the following warning is triggered:
WARNING: CPU: 1 PID: 135 at drivers/block/ublk_drv.c:1933 ublk_ch_release+0x423/0x4b0 [ublk_drv]
This happens when the daemon is abruptly killed:
- some references may still be held, because registering IO buffer
doesn't grab ublk char device reference
OR
- io->task_registered_buffers won't be cleared because io buffer is
released from non-daemon context
For zero-copy and auto buffer register modes, I/O reference crosses
syscalls, so IO reference may not be dropped naturally when ublk server is
killed abruptly. However, when releasing io_uring context, it is guaranteed
that the reference is dropped finally, see io_sqe_buffers_unregister() from
io_ring_ctx_free().
Fix this by adding ublk_drain_io_references() that:
- Waits for active I/O references dropped in async way by scheduling
work function, for avoiding ublk dev and io_uring file's release
dependency
- Reinitializes io->ref and io->task_registered_buffers to clean state
This ensures the reference count state is clean when ublk_queue_reinit()
is called, preventing the warning and potential use-after-free.
Fixes: 1f6540e2aabb ("ublk: zc register/unregister bvec")
Fixes: 1ceeedb59749 ("ublk: optimize UBLK_IO_UNREGISTER_IO_BUF on daemon task")
Fixes: 8a8fe42d765b ("ublk: optimize UBLK_IO_REGISTER_IO_BUF on daemon task")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250827121602.2619736-2-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Having setup time 0 violates tAR, tCLR of some chips, for instance
TOSHIBA TC58NVG2S3ETAI0 cannot be detected successfully (first ID byte
being read duplicated, i.e. 98 98 dc 90 15 76 14 03 instead of
98 dc 90 15 76 ...).
Atmel Application Notes postulated 1 cycle NRD_SETUP without explanation
[1], but it looks more appropriate to just calculate setup time properly.
[1] Link: https://ww1.microchip.com/downloads/aemDocuments/documents/MPU32/ApplicationNotes/ApplicationNotes/doc6255.pdf
Cc: stable@vger.kernel.org
Fixes: f9ce2eddf176 ("mtd: nand: atmel: Add ->setup_data_interface() hooks")
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Tested-by: Alexander Dahl <ada@thorsis.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
In case OOB write is requested during a data write, ECC is currently
lost. Avoid this issue by only writing in the free spare area.
This issue has been seen with a YAFFS2 file system.
Signed-off-by: Christophe Kerello <christophe.kerello@foss.st.com>
Cc: stable@vger.kernel.org
Fixes: 2cd457f328c1 ("mtd: rawnand: stm32_fmc2: add STM32 FMC2 NAND flash controller driver")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Avoid below overlapping mappings by using a contiguous
non-cacheable buffer.
[ 4.077708] DMA-API: stm32_fmc2_nfc 48810000.nand-controller: cacheline tracking EEXIST,
overlapping mappings aren't supported
[ 4.089103] WARNING: CPU: 1 PID: 44 at kernel/dma/debug.c:568 add_dma_entry+0x23c/0x300
[ 4.097071] Modules linked in:
[ 4.100101] CPU: 1 PID: 44 Comm: kworker/u4:2 Not tainted 6.1.82 #1
[ 4.106346] Hardware name: STMicroelectronics STM32MP257F VALID1 SNOR / MB1704 (LPDDR4 Power discrete) + MB1703 + MB1708 (SNOR MB1730) (DT)
[ 4.118824] Workqueue: events_unbound deferred_probe_work_func
[ 4.124674] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 4.131624] pc : add_dma_entry+0x23c/0x300
[ 4.135658] lr : add_dma_entry+0x23c/0x300
[ 4.139792] sp : ffff800009dbb490
[ 4.143016] x29: ffff800009dbb4a0 x28: 0000000004008022 x27: ffff8000098a6000
[ 4.150174] x26: 0000000000000000 x25: ffff8000099e7000 x24: ffff8000099e7de8
[ 4.157231] x23: 00000000ffffffff x22: 0000000000000000 x21: ffff8000098a6a20
[ 4.164388] x20: ffff000080964180 x19: ffff800009819ba0 x18: 0000000000000006
[ 4.171545] x17: 6361727420656e69 x16: 6c6568636163203a x15: 72656c6c6f72746e
[ 4.178602] x14: 6f632d646e616e2e x13: ffff800009832f58 x12: 00000000000004ec
[ 4.185759] x11: 00000000000001a4 x10: ffff80000988af58 x9 : ffff800009832f58
[ 4.192916] x8 : 00000000ffffefff x7 : ffff80000988af58 x6 : 80000000fffff000
[ 4.199972] x5 : 000000000000bff4 x4 : 0000000000000000 x3 : 0000000000000000
[ 4.207128] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff0000812d2c40
[ 4.214185] Call trace:
[ 4.216605] add_dma_entry+0x23c/0x300
[ 4.220338] debug_dma_map_sg+0x198/0x350
[ 4.224373] __dma_map_sg_attrs+0xa0/0x110
[ 4.228411] dma_map_sg_attrs+0x10/0x2c
[ 4.232247] stm32_fmc2_nfc_xfer.isra.0+0x1c8/0x3fc
[ 4.237088] stm32_fmc2_nfc_seq_read_page+0xc8/0x174
[ 4.242127] nand_read_oob+0x1d4/0x8e0
[ 4.245861] mtd_read_oob_std+0x58/0x84
[ 4.249596] mtd_read_oob+0x90/0x150
[ 4.253231] mtd_read+0x68/0xac
Signed-off-by: Christophe Kerello <christophe.kerello@foss.st.com>
Cc: stable@vger.kernel.org
Fixes: 2cd457f328c1 ("mtd: rawnand: stm32_fmc2: add STM32 FMC2 NAND flash controller driver")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
If a ma35_nand_chip_init() call fails, then a reference to 'nand_np' still
needs to be released.
Use for_each_child_of_node_scoped() to fix the issue.
Fixes: 5abb5d414d55 ("mtd: rawnand: nuvoton: add new driver for the Nuvoton MA35 SoC")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Intel Discrete Graphics non-volatile memory is only present on Intel
discrete graphics devices, and its auxiliary device is instantiated by
the Intel i915 and Xe2 DRM drivers. Hence add dependencies on DRM_I915
and DRM_XE, to prevent asking the user about this driver when
configuring a kernel without Intel graphics support.
Fixes: ceb5ab3cb6463795 ("mtd: add driver for intel graphics non-volatile memory device")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next
Miri Korenblit says:
====================
a few fixes, mainly of the cfg rework.
====================
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add back a few more PCI IDs to the config match table that
evidently I lost during the cleanups.
Fixes: 1fb053d9876f ("wifi: iwlwifi: cfg: remove unnecessary configs")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250828095500.46fee422651e.I8f6c3e9eea9523bb1658f5690b715eb443740e07@changeid
|
|
For devices handled by iwldvm, bc_table_dword was never set, but I missed
that during the removal thereof. Change the logic to not treat the byte
count table as dwords for devices older than 9000 series to fix that.
Fixes: 6570ea227826 ("wifi: iwlwifi: remove bc_table_dword transport config")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250828095500.eccd7d3939f1.Ibaffa06d0b3aa5f35a9451d94af34de208b8a2bc@changeid
|
|
In the fixed commit, I inadvertently removed two configurations
while combining the 0x0083/0x0084 device IDs. Replace the fixed
matches for the BG versions by a masked match and add the BGN
version back with a similar masked match.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=220477
Fixes: 1fb053d9876f ("wifi: iwlwifi: cfg: remove unnecessary configs")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250828095500.fabb99c2df9e.If0ad87bf9ab360da5f613e879fd416c17c544733@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
Felix Fietkay says:
===================
mt76 fixes for 6.17
- fix regressions from mt7996 MLO support rework
- fix offchannel handling issues on mt7996
- mt792x fixes
- fix multiple wcid linked list corruption issues
===================
Change-Id: Ib3e9a3217a40b9da69e122514d47fa46699c864b
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The adapter->chan_stats[] array is initialized in
mwifiex_init_channel_scan_gap() with vmalloc(), which doesn't zero out
memory. The array is filled in mwifiex_update_chan_statistics()
and then the user can query the data in mwifiex_cfg80211_dump_survey().
There are two potential issues here. What if the user calls
mwifiex_cfg80211_dump_survey() before the data has been filled in.
Also the mwifiex_update_chan_statistics() function doesn't necessarily
initialize the whole array. Since the array was not initialized at
the start that could result in an information leak.
Also this array is pretty small. It's a maximum of 900 bytes so it's
more appropriate to use kcalloc() instead vmalloc().
Cc: stable@vger.kernel.org
Fixes: bf35443314ac ("mwifiex: channel statistics support for mwifiex")
Suggested-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/20250815023055.477719-1-rongqianfeng@vivo.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The first array index is a bitmap indicating which of the
other values are valid. Check that bitmap before returning
a value.
Fixes: fc7214c3c986 ("wifi: iwlwifi: read DSM functions from UEFI")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220085
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250828095500.59ec52ff865e.I9e11f497a029eb38f481b2c90c43c0935285216d@changeid
|
|
The DSM func 0 (DSM_FUNC_QUERY) returns a bitmap of which
other functions contain valid data, query and check it
before returning other functions data.
Fixes: 9db93491f29e ("iwlwifi: acpi: support device specific method (DSM)")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220085
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250828095500.881e17ff8f6a.Ic6d92997d9d5fad127919d6e1b830cd3fe944468@changeid
|
|
We want to see bits being set in the scratch register upon resume, but
if all the bits are set, it means that we were kicked out of the PCI bus
and that clearly doesn't mean we can assume the firmware is still alive
after the suspend / resume cycle.
Fixes: cb347bd29d0d ("wifi: iwlwifi: mvm: fix hibernation")
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250828095500.0f203e559242.I59eff718cb5fda575db41081a1a389f7af488717@changeid
|
|
When the driver is removed the clocks are disabled twice: once in
macb_remove and a second time by runtime pm. Disable wakeup in remove so
all the clocks are disabled and skip the second call to macb_clks_disable.
Always suspend the device as we always set it active in probe.
Fixes: d54f89af6cc4 ("net: macb: Add pm runtime support")
Signed-off-by: Neil Mandir <neil.mandir@seco.com>
Co-developed-by: Sean Anderson <sean.anderson@linux.dev>
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Link: https://patch.msgid.link/20250826143022.935521-1-sean.anderson@linux.dev
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When there are memory-only nodes (nodes without CPUs), these nodes are not
properly initialized, causing kernel panic during boot.
of_numa_init
of_numa_parse_cpu_nodes
node_set(nid, numa_nodes_parsed);
of_numa_parse_memory_nodes
In of_numa_parse_cpu_nodes, numa_nodes_parsed gets updated only for nodes
containing CPUs. Memory-only nodes should have been updated in
of_numa_parse_memory_nodes, but they weren't.
Subsequently, when free_area_init() attempts to access NODE_DATA() for
these uninitialized memory nodes, the kernel panics due to NULL pointer
dereference.
This can be reproduced on ARM64 QEMU with 1 CPU and 2 memory nodes:
qemu-system-aarch64 \
-cpu host -nographic \
-m 4G -smp 1 \
-machine virt,accel=kvm,gic-version=3,iommu=smmuv3 \
-object memory-backend-ram,size=2G,id=mem0 \
-object memory-backend-ram,size=2G,id=mem1 \
-numa node,nodeid=0,memdev=mem0 \
-numa node,nodeid=1,memdev=mem1 \
-kernel $IMAGE \
-hda $DISK \
-append "console=ttyAMA0 root=/dev/vda rw earlycon"
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x481fd010]
[ 0.000000] Linux version 6.17.0-rc1-00001-gabb4b3daf18c-dirty (yintirui@local) (gcc (GCC) 12.3.1, GNU ld (GNU Binutils) 2.41) #52 SMP PREEMPT Mon Aug 18 09:49:40 CST 2025
[ 0.000000] KASLR enabled
[ 0.000000] random: crng init done
[ 0.000000] Machine model: linux,dummy-virt
[ 0.000000] efi: UEFI not found.
[ 0.000000] earlycon: pl11 at MMIO 0x0000000009000000 (options '')
[ 0.000000] printk: legacy bootconsole [pl11] enabled
[ 0.000000] OF: reserved mem: Reserved memory: No reserved-memory node in the DT
[ 0.000000] NODE_DATA(0) allocated [mem 0xbfffd9c0-0xbfffffff]
[ 0.000000] node 1 must be removed before remove section 23
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000040000000-0x00000000ffffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal [mem 0x0000000100000000-0x000000013fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000040000000-0x00000000bfffffff]
[ 0.000000] node 1: [mem 0x00000000c0000000-0x000000013fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff]
[ 0.000000] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000a0
[ 0.000000] Mem abort info:
[ 0.000000] ESR = 0x0000000096000004
[ 0.000000] EC = 0x25: DABT (current EL), IL = 32 bits
[ 0.000000] SET = 0, FnV = 0
[ 0.000000] EA = 0, S1PTW = 0
[ 0.000000] FSC = 0x04: level 0 translation fault
[ 0.000000] Data abort info:
[ 0.000000] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
[ 0.000000] CM = 0, WnR = 0, TnD = 0, TagAccess = 0
[ 0.000000] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[ 0.000000] [00000000000000a0] user address but active_mm is swapper
[ 0.000000] Internal error: Oops: 0000000096000004 [#1] SMP
[ 0.000000] Modules linked in:
[ 0.000000] CPU: 0 UID: 0 PID: 0 Comm: swapper Not tainted 6.17.0-rc1-00001-g760c6dabf762-dirty #54 PREEMPT
[ 0.000000] Hardware name: linux,dummy-virt (DT)
[ 0.000000] pstate: 800000c5 (Nzcv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 0.000000] pc : free_area_init+0x50c/0xf9c
[ 0.000000] lr : free_area_init+0x5c0/0xf9c
[ 0.000000] sp : ffffa02ca0f33c00
[ 0.000000] x29: ffffa02ca0f33cb0 x28: 0000000000000000 x27: 0000000000000000
[ 0.000000] x26: 4ec4ec4ec4ec4ec5 x25: 00000000000c0000 x24: 00000000000c0000
[ 0.000000] x23: 0000000000040000 x22: 0000000000000000 x21: ffffa02ca0f3b368
[ 0.000000] x20: ffffa02ca14c7b98 x19: 0000000000000000 x18: 0000000000000002
[ 0.000000] x17: 000000000000cacc x16: 0000000000000001 x15: 0000000000000001
[ 0.000000] x14: 0000000080000000 x13: 0000000000000018 x12: 0000000000000002
[ 0.000000] x11: ffffa02ca0fd4f00 x10: ffffa02ca14bab20 x9 : ffffa02ca14bab38
[ 0.000000] x8 : 00000000000c0000 x7 : 0000000000000001 x6 : 0000000000000002
[ 0.000000] x5 : 0000000140000000 x4 : ffffa02ca0f33c90 x3 : ffffa02ca0f33ca0
[ 0.000000] x2 : ffffa02ca0f33c98 x1 : 0000000080000000 x0 : 0000000000000001
[ 0.000000] Call trace:
[ 0.000000] free_area_init+0x50c/0xf9c (P)
[ 0.000000] bootmem_init+0x110/0x1dc
[ 0.000000] setup_arch+0x278/0x60c
[ 0.000000] start_kernel+0x70/0x748
[ 0.000000] __primary_switched+0x88/0x90
[ 0.000000] Code: d503201f b98093e0 52800016 f8607a93 (f9405260)
[ 0.000000] ---[ end trace 0000000000000000 ]---
[ 0.000000] Kernel panic - not syncing: Attempted to kill the idle task!
[ 0.000000] ---[ end Kernel panic - not syncing: Attempted to kill the idle task! ]---
Link: https://lkml.kernel.org/r/20250819075510.2079961-1-yintirui@huawei.com
Fixes: 767507654c22 ("arch_numa: switch over to numa_memblks")
Signed-off-by: Yin Tirui <yintirui@huawei.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Chen Jun <chenjun102@huawei.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Joanthan Cameron <Jonathan.Cameron@huawei.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Saravana Kannan <saravanak@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Use int instead of u32 for the 'rc' variable in xgene_ahci_softreset()
to store negative error codes returned by ahci_do_softreset().
In xgene_ahci_pmp_softreset(), remove the redundant 'rc' variable and
directly return the result of the ahci_do_softreset() call instead.
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
|
|
The fbnic driver was presenting with the following locking assert coming
out of a PM resume:
[ 42.208116][ T164] RTNL: assertion failed at drivers/net/phy/phylink.c (2611)
[ 42.208492][ T164] WARNING: CPU: 1 PID: 164 at drivers/net/phy/phylink.c:2611 phylink_resume+0x190/0x1e0
[ 42.208872][ T164] Modules linked in:
[ 42.209140][ T164] CPU: 1 UID: 0 PID: 164 Comm: bash Not tainted 6.17.0-rc2-virtme #134 PREEMPT(full)
[ 42.209496][ T164] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.17.0-5.fc42 04/01/2014
[ 42.209861][ T164] RIP: 0010:phylink_resume+0x190/0x1e0
[ 42.210057][ T164] Code: 83 e5 01 0f 85 b0 fe ff ff c6 05 1c cd 3e 02 01 90 ba 33 0a 00 00 48 c7 c6 20 3a 1d a5 48 c7 c7 e0 3e 1d a5 e8 21 b8 90 fe 90 <0f> 0b 90 90 e9 86 fe ff ff e8 42 ea 1f ff e9 e2 fe ff ff 48 89 ef
[ 42.210708][ T164] RSP: 0018:ffffc90000affbd8 EFLAGS: 00010296
[ 42.210983][ T164] RAX: 0000000000000000 RBX: ffff8880078d8400 RCX: 0000000000000000
[ 42.211235][ T164] RDX: 0000000000000000 RSI: 1ffffffff4f10938 RDI: 0000000000000001
[ 42.211466][ T164] RBP: 0000000000000000 R08: ffffffffa2ae79ea R09: fffffbfff4b3eb84
[ 42.211707][ T164] R10: 0000000000000003 R11: 0000000000000000 R12: ffff888007ad8000
[ 42.211997][ T164] R13: 0000000000000002 R14: ffff888006a18800 R15: ffffffffa34c59e0
[ 42.212234][ T164] FS: 00007f0dc8e39740(0000) GS:ffff88808f51f000(0000) knlGS:0000000000000000
[ 42.212505][ T164] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 42.212704][ T164] CR2: 00007f0dc8e9fe10 CR3: 000000000b56d003 CR4: 0000000000772ef0
[ 42.213227][ T164] PKRU: 55555554
[ 42.213366][ T164] Call Trace:
[ 42.213483][ T164] <TASK>
[ 42.213565][ T164] __fbnic_pm_attach.isra.0+0x8e/0xa0
[ 42.213725][ T164] pci_reset_function+0x116/0x1d0
[ 42.213895][ T164] reset_store+0xa0/0x100
[ 42.214025][ T164] ? pci_dev_reset_attr_is_visible+0x50/0x50
[ 42.214221][ T164] ? sysfs_file_kobj+0xc1/0x1e0
[ 42.214374][ T164] ? sysfs_kf_write+0x65/0x160
[ 42.214526][ T164] kernfs_fop_write_iter+0x2f8/0x4c0
[ 42.214677][ T164] ? kernfs_vma_page_mkwrite+0x1f0/0x1f0
[ 42.214836][ T164] new_sync_write+0x308/0x6f0
[ 42.214987][ T164] ? __lock_acquire+0x34c/0x740
[ 42.215135][ T164] ? new_sync_read+0x6f0/0x6f0
[ 42.215288][ T164] ? lock_acquire.part.0+0xbc/0x260
[ 42.215440][ T164] ? ksys_write+0xff/0x200
[ 42.215590][ T164] ? perf_trace_sched_switch+0x6d0/0x6d0
[ 42.215742][ T164] vfs_write+0x65e/0xbb0
[ 42.215876][ T164] ksys_write+0xff/0x200
[ 42.215994][ T164] ? __ia32_sys_read+0xc0/0xc0
[ 42.216141][ T164] ? do_user_addr_fault+0x269/0x9f0
[ 42.216292][ T164] ? rcu_is_watching+0x15/0xd0
[ 42.216442][ T164] do_syscall_64+0xbb/0x360
[ 42.216591][ T164] entry_SYSCALL_64_after_hwframe+0x4b/0x53
[ 42.216784][ T164] RIP: 0033:0x7f0dc8ea9986
A bit of digging showed that we were invoking the phylink_resume as a part
of the fbnic_up path when we were enabling the service task while not
holding the RTNL lock. We should be enabling this sooner as a part of the
ndo_open path and then just letting the service task come online later.
This will help to enforce the correct locking and brings the phylink
interface online at the same time as the network interface, instead of at a
later time.
I tested this on QEMU to verify this was working by putting the system to
sleep using "echo mem > /sys/power/state" to put the system to sleep in the
guest and then using the command "system_wakeup" in the QEMU monitor.
Fixes: 69684376eed5 ("eth: fbnic: Add link detection")
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://patch.msgid.link/175616257316.1963577.12238158800417771119.stgit@ahduyck-xeon-server.home.arpa
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The exception handling path for the __fbnic_pm_resume function had a bug in
that it was taking the devlink lock and then exiting to exception handling
instead of waiting until after it released the lock to do so. In order to
handle that I am swapping the placement of the unlock and the exception
handling jump to label so that we don't trigger a deadlock by holding the
lock longer than we need to.
In addition this change applies the same ordering to the rtnl_lock/unlock
calls in the same function as it should make the code easier to follow if
it adheres to a consistent pattern.
Fixes: 82534f446daa ("eth: fbnic: Add devlink dev flash support")
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://patch.msgid.link/175616256667.1963577.5543500806256052549.stgit@ahduyck-xeon-server.home.arpa
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If the doorbell is invalid, be sure to set the r to an error
state so the function returns an error.
Reviewed-by: David (Ming Qiang) Wu <David.Wu3@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 7e2a5b0a9a165a7c51274aa01b18be29491b4345)
Cc: stable@vger.kernel.org
|
|
The minimum firmware versions required for user queue functionality
have been increased to address an issue where the queue privilege
state was lost during queue connect operations.
The problem occurred because the privilege state was being restored
to its initial value at the beginning of the function, overwriting
the state that was properly set during the queue connect case.
This commit updates the minimum version requirements:
- ME firmware from 2390 to 2420
- PFP firmware from 2530 to 2580
- MEC firmware from 2600 to 2650
- MES firmware remains at 120
These updated firmware versions contain the necessary fixes to
properly maintain queue privilege state throughout connect operations.
Fixes: 61ca97e9590c ("drm/amdgpu: Add fw minimum version check for usermode queue")
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 5f976c9939f0d5916d2b8ef3156a6d1799781df1)
Cc: stable@vger.kernel.org
|
|
the PPSMC_MSG_GetPptLimit msg is not valid for gfx 11.0.3 on vf mode,
so skiped to create power1_cap* hwmon sysfs node.
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit e82a8d441038d8cb10b63047a9e705c42479d156)
Cc: stable@vger.kernel.org
|
|
This reverts commit b08425fa77ad2f305fe57a33dceb456be03b653f.
Revert this to align with 6.17 because the fixes tag
was wrong on this commit.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit be33e8a239aac204d7e9e673c4220ef244eb1ba3)
|
|
Set the MQD as appropriate for the kernel vs user queues.
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 7b9110f2897957efd9715b52fc01986509729db3)
Cc: stable@vger.kernel.org
|
|
Set the MQD as appropriate for the kernel vs user queues.
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 063d6683208722b1875f888a45084e3d112701ac)
Cc: stable@vger.kernel.org
|
|
Pull virtio/vhost fixes from Michael Tsirkin:
"More small fixes. Most notably this fixes a messed up ioctl number,
and a regression in shmem affecting drm users"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
virtio_net: adjust the execution order of function `virtnet_close` during freeze
virtio_input: Improve freeze handling
vhost: Fix ioctl # for VHOST_[GS]ET_FORK_FROM_OWNER
Revert "virtio: reject shm region if length is zero"
vhost/net: Protect ubufs with rcu read lock in vhost_net_ubuf_put()
virtio_pci: Fix misleading comment for queue vector
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
- drop the redundant pm_runtime_mark_last_busy() in rkvdec
- fix probing error handling in rkvdec
- fix an issue affecting lt6911uxe/lt6911uxc related to CSI-2 GPIO pins
in int3472
* tag 'media/v6.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: Remove redundant pm_runtime_mark_last_busy() calls
platform/x86: int3472: add hpd pin support
media: rkvdec: Remove redundant pm_runtime_mark_last_busy() calls
media: rkvdec: Fix an error handling path in rkvdec_probe()
media: rkvdec: Fix a NULL vs IS_ERR() bug in probe()
|
|
Never leave scheduled wcid entries on the temporary on-stack list
Fixes: 0b3be9d1d34e ("wifi: mt76: add separate tx scheduling queue for off-channel tx")
Link: https://patch.msgid.link/20250827085352.51636-6-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Avoid leaking them or keeping the wcid on the tx list
Fixes: 0b3be9d1d34e ("wifi: mt76: add separate tx scheduling queue for off-channel tx")
Link: https://patch.msgid.link/20250827085352.51636-5-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Since stations are recreated from scratch, all lists that wcids are added
to must be cleared before calling ieee80211_restart_hw.
Set wcid->sta = 0 for each wcid entry in order to ensure that they are
not added again before they are ready.
Fixes: 8a55712d124f ("wifi: mt76: mt7915: enable full system reset support")
Link: https://patch.msgid.link/20250827085352.51636-4-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Non-station wcid entries must not be passed to the rx functions.
In case of the global wcid entry, it could even lead to corruption in the wcid
array due to pointer being casted to struct mt7996_sta_link using container_of.
Fixes: 7464b12b7d92 ("wifi: mt76: mt7996: rework mt7996_rx_get_wcid to support MLO")
Link: https://patch.msgid.link/20250827085352.51636-3-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Polling and airtime reporting is valid for station entries only
Link: https://patch.msgid.link/20250827085352.51636-2-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
When a wcid can't be found, link_sta can be stale from a previous batch.
The code currently assumes that if link_sta is set, wcid is also non-zero.
Fix wcid NULL pointer dereference by resetting link_sta when a wcid entry
can't be found.
Fixes: 62da647a2b20 ("wifi: mt76: mt7996: Add MLO support to mt7996_tx_check_aggr()")
Link: https://patch.msgid.link/20250827085352.51636-1-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
