| Age | Commit message (Collapse) | Author |
|---|
|
The vport->req_vlan_fltr_en may be changed concurrently by function
hclge_sync_vlan_fltr_state() called in periodic work task and
function hclge_enable_vport_vlan_filter() called by user configuration.
It may cause the user configuration inoperative. Fixes it by protect
the vport->req_vlan_fltr by vport_lock.
Fixes: 2ba306627f59 ("net: hns3: add support for modify VLAN filter state")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250722125423.1270673-2-shaojijie@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Remove braces that are not necessary for single statement blocks
to fix checkpatch warnings.
Signed-off-by: Ignacio Pena <ignacio.pena87@gmail.com>
Link: https://lore.kernel.org/r/20250716175113.81519-1-ignacio.pena87@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove commented out code that serves no purpose, as suggested
by Greg KH.
Signed-off-by: Ignacio Pena <ignacio.pena87@gmail.com>
Link: https://lore.kernel.org/r/20250716175044.81439-3-ignacio.pena87@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix checkpatch warning by adding required blank line after variable
declaration in Efuse_CalculateWordCnts function.
Signed-off-by: Ignacio Pena <ignacio.pena87@gmail.com>
Link: https://lore.kernel.org/r/20250716175044.81439-2-ignacio.pena87@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove the long dashed separator lines from block comments as they
don't follow kernel coding style, as suggested by Greg KH.
Signed-off-by: Ignacio Pena <ignacio.pena87@gmail.com>
Link: https://lore.kernel.org/r/20250716175044.81439-1-ignacio.pena87@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The s390x ISM device data sheet clearly states that only one
request-response sequence is allowable per ISM function at any point in
time. Unfortunately as of today the s390/ism driver in Linux does not
honor that requirement. This patch aims to rectify that.
This problem was discovered based on Aliaksei's bug report which states
that for certain workloads the ISM functions end up entering error state
(with PEC 2 as seen from the logs) after a while and as a consequence
connections handled by the respective function break, and for future
connection requests the ISM device is not considered -- given it is in a
dysfunctional state. During further debugging PEC 3A was observed as
well.
A kernel message like
[ 1211.244319] zpci: 061a:00:00.0: Event 0x2 reports an error for PCI function 0x61a
is a reliable indicator of the stated function entering error state
with PEC 2. Let me also point out that a kernel message like
[ 1211.244325] zpci: 061a:00:00.0: The ism driver bound to the device does not support error recovery
is a reliable indicator that the ISM function won't be auto-recovered
because the ISM driver currently lacks support for it.
On a technical level, without this synchronization, commands (inputs to
the FW) may be partially or fully overwritten (corrupted) by another CPU
trying to issue commands on the same function. There is hard evidence that
this can lead to DMB token values being used as DMB IOVAs, leading to
PEC 2 PCI events indicating invalid DMA. But this is only one of the
failure modes imaginable. In theory even completely losing one command
and executing another one twice and then trying to interpret the outputs
as if the command we intended to execute was actually executed and not
the other one is also possible. Frankly, I don't feel confident about
providing an exhaustive list of possible consequences.
Fixes: 684b89bc39ce ("s390/ism: add device driver for internal shared memory")
Reported-by: Aliaksei Makarau <Aliaksei.Makarau@ibm.com>
Tested-by: Mahanta Jambigi <mjambigi@linux.ibm.com>
Tested-by: Aliaksei Makarau <Aliaksei.Makarau@ibm.com>
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250722161817.1298473-1-wintera@linux.ibm.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This driver implements the reboot/shutdown support exposed by the SMC
on Apple Silicon machines, such as Apple M1 Macs.
Signed-off-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sven Peter <sven@kernel.org>
Link: https://lore.kernel.org/r/20250610-smc-6-15-v7-7-556cafd771d3@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
This driver implements the GPIO service on top of the SMC framework
on Apple Mac machines. In particular, these are the GPIOs present in the
PMU IC which are used to control power to certain on-board devices.
Although the underlying hardware supports various pin config settings
(input/output, open drain, etc.), this driver does not implement that
functionality and leaves it up to the firmware to configure things
properly. We also don't yet support interrupts/events. This is
sufficient for device power control, which is the only thing we need to
support at this point. More features will be implemented when needed.
To our knowledge, only Apple Silicon Macs implement this SMC feature.
Signed-off-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Bartosz Golaszewski <brgl@bgdev.pl>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Sven Peter <sven@kernel.org>
Signed-off-by: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Sven Peter <sven@kernel.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20250610-smc-6-15-v7-6-556cafd771d3@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
The System Management Controller (SMC) on Apple Silicon machines is a
piece of hardware that exposes various functionalities such as
temperature sensors, voltage/power meters, shutdown/reboot handling,
GPIOs and more.
Communication happens via a shared mailbox using the RTKit protocol
which is also used for other co-processors. The SMC protocol then allows
reading and writing many different keys which implement the various
features. The MFD core device handles this protocol and exposes it
to the sub-devices.
Some of the sub-devices are potentially also useful on pre-M1 Apple
machines and support for SMCs on these machines can be added at a later
time.
Co-developed-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Sven Peter <sven@kernel.org>
Link: https://lore.kernel.org/r/20250610-smc-6-15-v7-5-556cafd771d3@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
shmem_destroy isn't always required for coprocessor-managed buffers but we
still enforce that it exists. Just relax the check.
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Sven Peter <sven@kernel.org>
Link: https://lore.kernel.org/r/20250610-smc-6-15-v7-4-556cafd771d3@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
The device is able to monitor temperature, voltage and current of each of
the four outputs. Add basic support for monitoring the temperature of the
four outputs and the die temperature.
Signed-off-by: Dimitri Fedrau <dimitri.fedrau@liebherr.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20250723-mc33xs2410-hwmon-v5-2-f62aab71cd59@liebherr.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
|
|
Support for hwmon is provided by a separate driver residing in hwmon
subsystem which is implemented as auxiliary device. Add handling of this
device.
Signed-off-by: Dimitri Fedrau <dimitri.fedrau@liebherr.com>
Link: https://lore.kernel.org/r/20250723-mc33xs2410-hwmon-v5-1-f62aab71cd59@liebherr.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
|
|
Because the other chip is guarded in an unlikely ifdef, I missed it when
converting this driver. Fix it now.
Fixes: 757259db79fc ("ssb: use new GPIO line value setter callbacks")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://patch.msgid.link/20250723141257.51412-1-brgl@bgdev.pl
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Fix typos in comments and error messages.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20250723201741.2908456-1-helgaas@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-misc-next
Georgi writes:
interconnect changes for 6.17
This pull request contains the interconnect changes for the 6.17-rc1
merge window. It contains only driver changes.
Driver changes:
- SC8180X and SC8280XP driver fixes
- Add new driver for the Qualcomm Milos SoC
- Add Support for EPSS L3 hardware in QCS8300 SoC
- DT bindings fixes and other cleanups
Signed-off-by: Georgi Djakov <djakov@kernel.org>
* tag 'icc-6.17-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/djakov/icc:
interconnect: qcom: Add Milos interconnect provider driver
dt-bindings: interconnect: document the RPMh Network-On-Chip Interconnect in Qualcomm Milos SoC
dt-bindings: interconnect: qcom,msm8998-bwmon: Allow 'nonposted-mmio'
dt-bindings: interconnect: Add EPSS L3 compatible for QCS8300 SoC
dt-bindings: interconnect: qcom: Remove double colon from description
interconnect: qcom: qcs615: Drop IP0 interconnects
interconnect: qcom: sc8180x: specify num_nodes
interconnect: qcom: sc8280xp: specify num_links for qnm_a1noc_cfg
|
|
Pull drm fixes from Dave Airlie:
"This might just be part one, but I'm sending it a bit early as it has
two sets of reverts for regressions, one is all the gem/dma-buf
handling and another was a nouveau ioctl change.
Otherwise there is an amdgpu fix, nouveau fix and a scheduler fix.
If any other changes come in I'll follow up with another more usual
Fri/Sat MR.
gem:
- revert all the dma-buf/gem changes as there as lifetime issues
with them
nouveau:
- revert an ioctl change as it causes issues
- fix NULL ptr on fermi
bridge:
- remove extra semicolon
sched:
- remove hang causing optimisation
amdgpu:
- fix garbage in cleared vram after resume"
* tag 'drm-fixes-2025-07-24' of https://gitlab.freedesktop.org/drm/kernel:
drm/bridge: ti-sn65dsi86: Remove extra semicolon in ti_sn_bridge_probe()
Revert "drm/nouveau: check ioctl command codes better"
drm/nouveau/nvif: fix null ptr deref on pre-fermi boards
Revert "drm/gem-dma: Use dma_buf from GEM object instance"
Revert "drm/gem-shmem: Use dma_buf from GEM object instance"
Revert "drm/gem-framebuffer: Use dma_buf from GEM object instance"
Revert "drm/prime: Use dma_buf from GEM object instance"
Revert "drm/etnaviv: Use dma_buf from GEM object instance"
Revert "drm/vmwgfx: Use dma_buf from GEM object instance"
Revert "drm/virtio: Use dma_buf from GEM object instance"
drm/sched: Remove optimization that causes hang when killing dependent jobs
drm/amdgpu: Reset the clear flag in buddy during resume
|
|
To eliminate the use of struct page in page pool, the page pool users
should use netmem descriptor and APIs instead.
Make icssg-prueth access ->pp through netmem_desc instead of page.
Signed-off-by: Byungchul Park <byungchul@sk.com>
Link: https://patch.msgid.link/20250721021835.63939-12-byungchul@sk.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
To eliminate the use of struct page in page pool, the page pool users
should use netmem descriptor and APIs instead.
Make mlx5 access ->pp through netmem_desc instead of page.
Signed-off-by: Byungchul Park <byungchul@sk.com>
Link: https://patch.msgid.link/20250721021835.63939-11-byungchul@sk.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
To eliminate the use of struct page in page pool, the page pool users
should use netmem descriptor and APIs instead.
Make idpf access ->pp through netmem_desc instead of page.
Signed-off-by: Byungchul Park <byungchul@sk.com>
Link: https://patch.msgid.link/20250721021835.63939-10-byungchul@sk.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
To eliminate the use of struct page in page pool, the page pool users
should use netmem descriptor and APIs instead.
Make iavf access ->pp through netmem_desc instead of page.
Signed-off-by: Byungchul Park <byungchul@sk.com>
Link: https://patch.msgid.link/20250721021835.63939-9-byungchul@sk.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
To eliminate the use of struct page in page pool, the page pool users
should use netmem descriptor and APIs instead.
Make octeontx2-pf access ->pp through netmem_desc instead of page.
Signed-off-by: Byungchul Park <byungchul@sk.com>
Link: https://patch.msgid.link/20250721021835.63939-8-byungchul@sk.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
To eliminate the use of struct page in page pool, the page pool users
should use netmem descriptor and APIs instead.
Make fec access ->pp through netmem_desc instead of page.
Signed-off-by: Byungchul Park <byungchul@sk.com>
Link: https://patch.msgid.link/20250721021835.63939-7-byungchul@sk.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
To eliminate the use of struct page in page pool, the page pool users
should use netmem descriptor and APIs instead.
Make mt76 access ->pp through netmem_desc instead of page.
Signed-off-by: Byungchul Park <byungchul@sk.com>
Link: https://patch.msgid.link/20250721021835.63939-6-byungchul@sk.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
To eliminate the use of struct page in page pool, the page pool users
should use netmem descriptor and APIs instead.
Make netdevsim access ->pp through netmem_desc instead of page.
Signed-off-by: Byungchul Park <byungchul@sk.com>
Link: https://patch.msgid.link/20250721021835.63939-5-byungchul@sk.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
To eliminate the use of struct page in page pool, the page pool users
should use netmem descriptor and APIs instead.
Make mlx4 access ->pp_ref_count through netmem_desc instead of page.
While at it, add a helper, pp_page_to_nmdesc() and __pp_page_to_nmdesc(),
that can be used to get netmem_desc from page only if it's a pp page.
For now that netmem_desc overlays on page, it can be achieved by just
casting, and use macro and _Generic to cover const casting as well.
Plus, change page_pool_page_is_pp() to check for 'const struct page *'
instead of 'struct page *' since it doesn't modify data and additionally
covers const type.
Signed-off-by: Byungchul Park <byungchul@sk.com>
Link: https://patch.msgid.link/20250721021835.63939-4-byungchul@sk.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The IFLA_VXLAN_ID data has been converted to local variable vni in
vxlan_nl2conf(), there is no need to do it again when set conf->vni.
Signed-off-by: Wang Liang <wangliang74@huawei.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20250722093049.1527505-1-wangliang74@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Netdevsim emulates firmware update and it takes 5 seconds to complete.
For some use cases, this is too long and unnecessary. Allow user to
configure the time by exposing debugfs a knob to set chunk time.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250722091945.79506-1-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Correct the misspelling "platorms" to "platforms" in the help text
for the CROS_USBPD_NOTIFY Kconfig option.
Signed-off-by: Keenan Salandy <keenansalandy@gmail.com>
Link: https://lore.kernel.org/r/20250723140930.1443-1-keenansalandy@gmail.com
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
|
|
Original logic only sets the return value but doesn't jump out of the
loop if the bus is kept active by a client. This is not expected. A
malicious or buggy i2c client can hang the kernel in this case and
should be avoided. This is observed during a long time test with a
PCA953x GPIO extender.
Fix it by changing the logic to not only sets the return value, but also
jumps out of the loop and return to the caller with -ETIMEDOUT.
Fixes: fbfab1ab0658 ("i2c: qup: reorganization of driver code to remove polling for qup v1")
Signed-off-by: Yang Xiwen <forbidden405@outlook.com>
Cc: <stable@vger.kernel.org> # v4.17+
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250616-qca-i2c-v1-1-2a8d37ee0a30@outlook.com
|
|
The current implementation uses wait_for_completion(), which can cause
the caller to hang indefinitely if the transfer never completes.
Switch to wait_for_completion_interruptible() so that the operation can
be interrupted by signals.
Fixes: 84e1d0bf1d71 ("i2c: virtio: disable timeout handling")
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: <stable@vger.kernel.org> # v5.16+
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/b8944e9cab8eb959d888ae80add6f2a686159ba2.1751541962.git.viresh.kumar@linaro.org
|
|
The acpi_evaluate_object() returns an ACPI error code and not
Linux one. For the some platforms the err will have positive code
which may be interpreted incorrectly. Use device_reset() for
reset control which handles it correctly.
Fixes: bd2fdedbf2ba ("i2c: tegra: Add the ACPI support")
Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Akhil R <akhilrajeev@nvidia.com>
Cc: <stable@vger.kernel.org> # v5.17+
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250710131206.2316-2-akhilrajeev@nvidia.com
|
|
Use guard to automatically release the lock after going out of scope
instead of calling it manually.
i2c_imx_slave_handle() can safely be entered with the lock held.
Refactored the i2c_imx_isr function so that i2c_imx_master_isr
does not participate in the guard scope
So Using scoped_guard simplifies the control flow
by ensuring consistent and automatic unlock,
which improves readability without affecting correctness.
Co-developed-by: Yongchao Jia <jyc0019@gmail.com>
Signed-off-by: Yongchao Jia <jyc0019@gmail.com>
Signed-off-by: Troy Mitchell <troymitchell988@gmail.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250531-i2c-imx-update-v4-1-bfad0c8fd45c@gmail.com
|
|
Remove hard-coded strings by using the str_on_off() helper.
Signed-off-by: Yumeng Fang <fang.yumeng@zte.com.cn>
Acked-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250623203144007kQF7E1Bhy5PJl-Ph3u3Ou@zte.com.cn
|
|
Add support for the Renesas RZ/T2H (R9A09G077) SoC, which features a
different interrupt layout for the RIIC controller. Unlike other SoCs
with individual error interrupts, RZ/T2H uses a combined error interrupt
(EEI).
Introduce a new IRQ descriptor table for RZ/T2H, along with a custom
ISR (`riic_eei_isr`) to handle STOP and NACK detection from the shared
interrupt.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> # on RZ/A1
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250625104526.101004-6-prabhakar.mahadev-lad.rj@bp.renesas.com
|
|
Reorder the entry in `riic_i2c_dt_ids` to place the generic compatible
string `renesas,riic-rz` at the end of the array, following the
convention used in other Renesas drivers.
Also, drop the unnecessary comma after the sentinel entry, as it is
not needed.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> # on RZ/A1
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250625104526.101004-5-prabhakar.mahadev-lad.rj@bp.renesas.com
|
|
In preparation for adding support for Renesas RZ/T2H and RZ/N2H SoCs,
which feature a combined error interrupt instead of individual error
interrupts per condition, update the driver to support configurable IRQ
layouts via OF data.
Introduce a new `irqs` field and `num_irqs` count in `riic_of_data` to
allow future SoCs to provide a custom IRQ layout. This patch is a
non-functional change for existing SoCs and maintains compatibility with
the current `riic_irqs` array.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> # on RZ/A1
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250625104526.101004-4-prabhakar.mahadev-lad.rj@bp.renesas.com
|
|
Fix the kernel-doc warning by describing the 'dma_dev' member in
the tegra_i2c_dev struct. This resolves the compilation warning:
drivers/i2c/busses/i2c-tegra.c:297: warning: Function parameter or struct member 'dma_dev' not described in 'tegra_i2c_dev'
Signed-off-by: Hans Zhang <18255117159@163.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250522163814.399630-1-18255117159@163.com
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
drm-misc-fixes for v6.16-rc8/final?:
- Revert all uses of drm_gem_object->dmabuf to
drm_gem_object->import_attach->dmabuf.
- Fix amdgpu returning BIOS cluttered VRAM after resume.
- Scheduler hang fix.
- Revert nouveau ioctl fix as it caused regressions.
- Fix null pointer deref in nouveau.
- Fix unnecessary semicolon in ti_sn_bridge_probe.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://lore.kernel.org/r/72235afd-c849-49fe-9cc1-2b1781abdf08@linux.intel.com
|
|
Trace events can take up to 5K each when they are defined, regardless if
they are used or not. The binder lock events: binder_lock, binder_locked
and binder_unlock are no longer used.
Remove them.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Arve =?utf-8?b?SGrDuG5u?= =?utf-8?b?ZXbDpWc=?= " <arve@android.com>
Cc: Todd Kjos <tkjos@android.com>
Cc: Martijn Coenen <maco@android.com>
Cc: Joel Fernandes <joelagnelf@nvidia.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Link: https://lore.kernel.org/20250612093408.3b7320fa@batman.local.home
Fixes: a60b890f607d ("binder: remove global binder lock")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Carlos Llamas <cmllamas@google.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
|
|
The firmware raises an alive interrupt upon sending the HCI_RESET or
BTINTEL_HCI_OP_RESET command. As part of handling the reset command,
firmware initializes the hardware and data path and raises the alive
interrupt. Upon receiving the alive interrupt, the driver must enable
the data path and grant RX buffers to the firmware before sending any
commands.
The alive context maintained in the driver must be updated before
sending BTINTEL_HCI_OP_RESET or HCI_OP_RESET to prevent a potential race
condition where the context is also updated in the threaded IRQ.
The issue was observed in a stress reboot usecase (1/25) using "sudo
reboot" command where the firmware download was failing as the driver
was not granting RX buffer to firmware due to race condition.
Bluetooth: hci0: API lock is disabled
Bluetooth: hci0: Debug lock is disabled
Bluetooth: hci0: Minimum firmware build 1 week 10 2014
Bluetooth: hci0: Bootloader timestamp 2023.43 buildtype 1 build 11631
Bluetooth: hci0: Found device firmware: intel/ibt-00a0-00a1-iml.sfi
Bluetooth: hci0: Boot Address: 0xb0301000
Bluetooth: hci0: Firmware Version: 167-12.25
Bluetooth: hci0: Waiting for firmware download to complete
Bluetooth: hci0: Firmware loaded in 99902 usecs
Bluetooth: hci0: Alive context: fw_dl old_boot_stage: 0xa0db0003
new_boot_stage: 0xa0db0003
Bluetooth: hci0: sent cmd: 0xfc01 alive context changed:
fw_dl -> intel_reset1
Bluetooth: hci0: Waiting for device to boot
Bluetooth: hci0: Device boot timeout
Bluetooth: hci0: Firmware download retry count: 1
Fixes: 05c200c8f029 ("Bluetooth: btintel_pcie: Add handshake between driver and firmware")
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Sai Teja Aluvala <aluvala.sai.teja@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
The firmware raises an alive interrupt upon receiving the HCI_RESET or
BTINTEL_HCI_OP_RESET (Intel reset - 0xfc01) command. This change fixes
the driver to properly wait for the alive interrupt to avoid driver
sending commands to firmware before it is ready to process.
For details on the handshake between the driver and firmware, refer to
commit 05c200c8f029 ("Bluetooth: btintel_pcie: Add handshake between
driver and firmware").
As the driver needs to handle two interrupts for HCI_OP_RESET and
BTINTEL_HCI_OP_RESET, the firmware ensures that the TX completion
interrupt is always followed by the alive interrupt.
Fixes: 05c200c8f029 ("Bluetooth: btintel_pcie: Add handshake between driver and firmware")
Signed-off-by: Sai Teja Aluvala <aluvala.sai.teja@intel.com>
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Add one more part with ID (0x28de, 0x1401) to usb_device_id table for
Qualcomm WCN6855, and its device info from /sys/kernel/debug/usb/devices
is shown below:
T: Bus=03 Lev=01 Prnt=01 Port=09 Cnt=03 Dev#= 4 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=28de ProdID=1401 Rev= 0.01
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms
I: If#= 1 Alt= 7 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 65 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 65 Ivl=1ms
Signed-off-by: Zijun Hu <Zijun.Hu@oss.qualcomm.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Sort WCN6855 device IDs to more easily manage them.
Signed-off-by: Zijun Hu <Zijun.Hu@oss.qualcomm.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
There are custom-made firmwares based on board ID for a given QCA BT
chip sometimes, and they are different with existing firmwares and put
in a separate subdirectory to avoid conflict, for example:
QCA2066, as a variant of WCN6855, has firmwares under 'qca/QCA2066/'
of linux-firmware repository.
Support downloading custom-made firmwares based on a table newly added.
Signed-off-by: Zijun Hu <zijun.hu@oss.qualcomm.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
This adds uevents which will be generated whenever FW dump is triggered,
FW dump is complete and FW (re)download is done.
This feature is needed for IW612 chipset, which is a tri-radio chipset,
where WLAN runs on CPU1 and BT and Zigbee runs on CPU2.
Currently, whenever BT FW crashes, and FW dump is in progress, there is
no way for 15.4 application to know that CPU2 is in bad state, and when
it will be recovered.
With the help of these uevents and udev rules, the 15.4 app, or any
userspace application can be alerted whenever CPU2 goes in bad state and
recoveres after BTNXPUART reloads the firmware.
[ 334.255154] Bluetooth: hci0: ==== Start FW dump ===
[ 334.261003] Bluetooth: hci0: ==== Send uevent: BTNXPUART_DEV=serial0-0:BTNXPUART_STATE=FW_DUMP_ACTIVE ===
[ 351.486048] Bluetooth: hci0: ==== FW dump complete ===
[ 351.491356] Bluetooth: hci0: ==== Send uevent: BTNXPUART_DEV=serial0-0:BTNXPUART_STATE=FW_DUMP_DONE ===
[ 352.028974] Bluetooth: hci0: ChipID: 7601, Version: 0
[ 352.034490] Bluetooth: hci0: Request Firmware: nxp/uartspi_n61x_v1.bin.se
[ 353.979977] Bluetooth: hci0: FW Download Complete: 417064 bytes
[ 355.197222] Bluetooth: hci0: ==== Send uevent: BTNXPUART_DEV=serial0-0:BTNXPUART_STATE=FW_READY ===
Tested this change by creating a simple udev rule to store the
BTNXPUART_STATE value in a ~/<BTNXPUART_DEV>/state file, and running
15.4 traffic.
The 15.4 packets were sent over SPI only when BTNXPUART_STATE was
FW_READY.
Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com>
Tested-by: Jean-Yves Salaün <jean-yves.salaun@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
This adds proper handling for the independent reset command sent by the
driver after FW dump is complete.
In normal scenario, the independent reset vendor command gives a success
response before jumping to bootcode.
However, when FW goes in a bad state, and sends out FW dump packets, the
independent reset command does not get any response from the controller.
[ 159.807732] Bluetooth: hci0: ==== Start FW dump ===
[ 180.759060] Bluetooth: hci0: ==== FW dump complete ===
[ 182.779208] Bluetooth: hci0: command 0xfcfc tx timeout
[ 183.364974] Bluetooth: hci0: ChipID: 7601, Version: 0
[ 183.368490] Bluetooth: hci0: Request Firmware: nxp/uartspi_n61x_v1.bin.se
[ 184.679977] Bluetooth: hci0: FW Download Complete: 417064 bytes
[ 187.963102] Bluetooth: hci0: Opcode 0x0c03 failed: -110
As a fix for such scenario, the independent reset vendor command is sent
using the __hci_cmd_send() API, which does not expect any response for
vendor commands.
__hci_cmd_send is non blocking, so before the tx_work is scheduled, it
sometimes gets canceled and 3F|FC command is never sent. Adding a small
delay after __hci_cmd_send allows the command to be sent to the
controller.
Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com>
Tested-by: Jean-Yves Salaün <jean-yves.salaun@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Use macro for Intel Reset command (0xfc01) instead of hard coded value.
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Found by codespell.
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Found by codespell.
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Found by codespell.
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
