| Age | Commit message (Collapse) | Author |
|---|
|
Remove the redundant assignment if kzalloc() succeeds to avoid memory
leak.
Fixes: bd2cdd5e400f ("scsi: lpfc: NVME Initiator: Add debugfs support")
Signed-off-by: Jiasheng Jiang <jiashengjiangcool@gmail.com>
Link: https://lore.kernel.org/r/20250801185202.42631-1-jiashengjiangcool@gmail.com
Reviewed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The venus driver fails to check if dev_pm_opp_find_freq_{ceil,floor}()
returns an error pointer before calling dev_pm_opp_put(). This causes
a crash when OPP tables are not present in device tree.
Unable to handle kernel access to user memory outside uaccess routines
at virtual address 000000000000002e
...
pc : dev_pm_opp_put+0x1c/0x4c
lr : core_clks_enable+0x4c/0x16c [venus_core]
Add IS_ERR() checks before calling dev_pm_opp_put() to avoid
dereferencing error pointers.
Fixes: b179234b5e59 ("media: venus: pm_helpers: use opp-table for the frequency")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Function scsi_host_remove() doesn't exist, the actual function name is
scsi_remove_host().
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Link: https://lore.kernel.org/r/20250731133311.52034cc4@endymion
Reviewed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Commit 3c7ac40d7322 ("scsi: ufs: core: Delegate the interrupt service
routine to a threaded IRQ handler") introduced a regression where the UFS
interrupt status register (IS) was not cleared in ufshcd_intr() when
operating in MCQ mode. As a result, the IS register remained uncleared.
This led to a persistent issue during UIC interrupts:
ufshcd_is_auto_hibern8_error() consistently returned true because the
UFSHCD_UIC_HIBERN8_MASK bit was set, while the active command was neither
UIC_CMD_DME_HIBER_ENTER nor UIC_CMD_DME_HIBER_EXIT. This caused
continuous auto hibern8 enter errors and device failed to boot.
To fix this, ensure that the interrupt status register is properly
cleared in the ufshcd_intr() function for both MCQ mode with ESI enabled.
[ 4.553226] ufshcd-qcom 1d84000.ufs: ufshcd_check_errors: Auto
Hibern8 Enter failed - status: 0x00000040, upmcrs: 0x00000001
[ 4.553229] ufshcd-qcom 1d84000.ufs: ufshcd_check_errors: saved_err
0x40 saved_uic_err 0x0
[ 4.553311] host_regs: 00000000: d5c7033f 20e0071f 00000400 00000000
[ 4.553312] host_regs: 00000010: 01000000 00010217 00000c96 00000000
[ 4.553314] host_regs: 00000020: 00000440 00170ef5 00000000 00000000
[ 4.553316] host_regs: 00000030: 0000010f 00000001 00000000 00000000
[ 4.553317] host_regs: 00000040: 00000000 00000000 00000000 00000000
[ 4.553319] host_regs: 00000050: fffdf000 0000000f 00000000 00000000
[ 4.553320] host_regs: 00000060: 00000001 80000000 00000000 00000000
[ 4.553322] host_regs: 00000070: fffde000 0000000f 00000000 00000000
[ 4.553323] host_regs: 00000080: 00000001 00000000 00000000 00000000
[ 4.553325] host_regs: 00000090: 00000002 d0020000 00000000 01930200
Fixes: 3c7ac40d7322 ("scsi: ufs: core: Delegate the interrupt service routine to a threaded IRQ handler")
Co-developed-by: Palash Kambar <quic_pkambar@quicinc.com>
Signed-off-by: Palash Kambar <quic_pkambar@quicinc.com>
Signed-off-by: Nitin Rawat <quic_nitirawa@quicinc.com>
Link: https://lore.kernel.org/r/20250728225711.29273-1-quic_nitirawa@quicinc.com
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-QRD
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The commit referenced in the Fixes tag causes usbnet to malfunction
(identified via git bisect). Post-commit, my external RJ45 LAN cable
fails to connect. Linus also reported the same issue after pulling that
commit.
The code has a logic error: netif_carrier_on() is only called when the
link is already on. Fix this by moving the netif_carrier_on() call
outside the if-statement entirely. This ensures it is always called
when EVENT_LINK_CARRIER_ON is set and properly clears it regardless
of the link state.
Cc: stable@vger.kernel.org
Cc: Armando Budianto <sprite@gnuweeb.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/all/CAHk-=wjqL4uF0MG_c8+xHX1Vv8==sPYQrtzbdA3kzi96284nuQ@mail.gmail.com
Closes: https://lore.kernel.org/netdev/CAHk-=wjKh8X4PT_mU1kD4GQrbjivMfPn-_hXa6han_BTDcXddw@mail.gmail.com
Closes: https://lore.kernel.org/netdev/0752dee6-43d6-4e1f-81d2-4248142cccd2@gnuweeb.org
Fixes: 0d9cfc9b8cb1 ("net: usbnet: Avoid potential RCU stall on LINK_CHANGE event")
Signed-off-by: Ammar Faizi <ammarfaizi2@gnuweeb.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
emac_rx_packet() is a common function for handling traffic
for both xdp and non-xdp use cases. Use common logic for
handling skb with or without xdp to prevent any incorrect
packet processing. This patch fixes ping working with
XDP_PASS for icssg driver.
Fixes: 62aa3246f4623 ("net: ti: icssg-prueth: Add XDP support")
Signed-off-by: Meghana Malladi <m-malladi@ti.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250803180216.3569139-1-m-malladi@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Wrap copying of drop stats on TX path from fbd->hw_stats by the
hw_stats_lock. Currently, it is being performed outside the lock and
another thread accessing fbd->hw_stats can lead to inconsistencies.
Fixes: 5f8bd2ce8269 ("eth: fbnic: add support for TMI stats")
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250802024636.679317-3-mohsin.bashr@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Correctly copy the tx_dropped stats from the fbd->hw_stats to the
rtnl_link_stats64 struct.
Fixes: 5f8bd2ce8269 ("eth: fbnic: add support for TMI stats")
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250802024636.679317-2-mohsin.bashr@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Alex added page bias of LONG_MAX, which is admittedly quite
a clever way of catching overflows of the pp ref count.
The page pool code was "optimized" to leave the ref at 1
for freed pages so it can't catch basic bugs by itself any more.
(Something we should probably address under DEBUG_NET...)
Unfortunately for fbnic since commit f7dc3248dcfb ("skbuff: Optimization
of SKB coalescing for page pool") core _may_ actually take two extra
pp refcounts, if one of them is returned before driver gives up the bias
the ret < 0 check in page_pool_unref_netmem() will trigger.
While at it add a FBNIC_ to the name of the driver constant.
Fixes: 0cb4c0a13723 ("eth: fbnic: Implement Rx queue alloc/start/stop/free")
Link: https://patch.msgid.link/20250801170754.2439577-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
After the call to phy_disconnect() netdev->phydev is reset to NULL.
So fixed_phy_unregister() would be called with a NULL pointer as argument.
Therefore cache the phy_device before this call.
Fixes: e24a6c874601 ("net: ftgmac100: Get link speed and duplex for NC-SI")
Cc: stable@vger.kernel.org
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Dawid Osuchowski <dawid.osuchowski@linux.intel.com>
Link: https://patch.msgid.link/2b80a77a-06db-4dd7-85dc-3a8e0de55a1d@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
A large DMA mapping request can loop through dma address pinning for
many pages. In cases where THP can not be used, the repeated vmf_insert_pfn can
be costly, so let the task reschedule as need to prevent CPU stalls. Failure to
do so has potential harmful side effects, like increased memory pressure
as unrelated rcu tasks are unable to make their reclaim callbacks and
result in OOM conditions.
rcu: INFO: rcu_sched self-detected stall on CPU
rcu: 36-....: (20999 ticks this GP) idle=b01c/1/0x4000000000000000 softirq=35839/35839 fqs=3538
rcu: hardirqs softirqs csw/system
rcu: number: 0 107 0
rcu: cputime: 50 0 10446 ==> 10556(ms)
rcu: (t=21075 jiffies g=377761 q=204059 ncpus=384)
...
<TASK>
? asm_sysvec_apic_timer_interrupt+0x16/0x20
? walk_system_ram_range+0x63/0x120
? walk_system_ram_range+0x46/0x120
? pgprot_writethrough+0x20/0x20
lookup_memtype+0x67/0xf0
track_pfn_insert+0x20/0x40
vmf_insert_pfn_prot+0x88/0x140
vfio_pci_mmap_huge_fault+0xf9/0x1b0 [vfio_pci_core]
__do_fault+0x28/0x1b0
handle_mm_fault+0xef1/0x2560
fixup_user_fault+0xf5/0x270
vaddr_get_pfns+0x169/0x2f0 [vfio_iommu_type1]
vfio_pin_pages_remote+0x162/0x8e0 [vfio_iommu_type1]
vfio_iommu_type1_ioctl+0x1121/0x1810 [vfio_iommu_type1]
? futex_wake+0x1c1/0x260
x64_sys_call+0x234/0x17a0
do_syscall_64+0x63/0x130
? exc_page_fault+0x63/0x130
entry_SYSCALL_64_after_hwframe+0x4b/0x53
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Link: https://lore.kernel.org/r/20250715184622.3561598-1-kbusch@meta.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Extend the qat_vfio_pci variant driver to support QAT 6xxx Virtual
Functions (VFs). Add the relevant QAT 6xxx VF device IDs to the driver's
probe table, enabling proper detection and initialization of these devices.
Update the module description to reflect that the driver now supports all
QAT generations.
Signed-off-by: Małgorzata Mielnik <malgorzata.mielnik@intel.com>
Signed-off-by: Suman Kumar Chakraborty <suman.kumar.chakraborty@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Link: https://lore.kernel.org/r/20250715081150.1244466-1-suman.kumar.chakraborty@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
This was missed during the initial implementation. The VFIO PCI encodes
the vf_token inside the device name when opening the device from the group
FD, something like:
"0000:04:10.0 vf_token=bd8d9d2b-5a5f-4f5a-a211-f591514ba1f3"
This is used to control access to a VF unless there is co-ordination with
the owner of the PF.
Since we no longer have a device name in the cdev path, pass the token
directly through VFIO_DEVICE_BIND_IOMMUFD using an optional field
indicated by VFIO_DEVICE_BIND_FLAG_TOKEN.
Fixes: 5fcc26969a16 ("vfio: Add VFIO_DEVICE_BIND_IOMMUFD")
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/0-v3-bdd8716e85fe+3978a-vfio_token_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
https://gitlab.freedesktop.org/drm/i915/kernel into drm-next
drm/i915 fixes for v6.17-rc1:
- Fixes around DP LFPS (Low-Frequency Periodic Signaling)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/e1147bede8f219682419d198022cfe8d9d4edc28@intel.com
|
|
Ever since commit c2ff29e99a76 ("siw: Inline do_tcp_sendpages()"),
we have been doing this:
static int siw_tcp_sendpages(struct socket *s, struct page **page, int offset,
size_t size)
[...]
/* Calculate the number of bytes we need to push, for this page
* specifically */
size_t bytes = min_t(size_t, PAGE_SIZE - offset, size);
/* If we can't splice it, then copy it in, as normal */
if (!sendpage_ok(page[i]))
msg.msg_flags &= ~MSG_SPLICE_PAGES;
/* Set the bvec pointing to the page, with len $bytes */
bvec_set_page(&bvec, page[i], bytes, offset);
/* Set the iter to $size, aka the size of the whole sendpages (!!!) */
iov_iter_bvec(&msg.msg_iter, ITER_SOURCE, &bvec, 1, size);
try_page_again:
lock_sock(sk);
/* Sendmsg with $size size (!!!) */
rv = tcp_sendmsg_locked(sk, &msg, size);
This means we've been sending oversized iov_iters and tcp_sendmsg calls
for a while. This has a been a benign bug because sendpage_ok() always
returned true. With the recent slab allocator changes being slowly
introduced into next (that disallow sendpage on large kmalloc
allocations), we have recently hit out-of-bounds crashes, due to slight
differences in iov_iter behavior between the MSG_SPLICE_PAGES and
"regular" copy paths:
(MSG_SPLICE_PAGES)
skb_splice_from_iter
iov_iter_extract_pages
iov_iter_extract_bvec_pages
uses i->nr_segs to correctly stop in its tracks before OoB'ing everywhere
skb_splice_from_iter gets a "short" read
(!MSG_SPLICE_PAGES)
skb_copy_to_page_nocache copy=iov_iter_count
[...]
copy_from_iter
/* this doesn't help */
if (unlikely(iter->count < len))
len = iter->count;
iterate_bvec
... and we run off the bvecs
Fix this by properly setting the iov_iter's byte count, plus sending the
correct byte count to tcp_sendmsg_locked.
Link: https://patch.msgid.link/r/20250729120348.495568-1-pfalcato@suse.de
Cc: stable@vger.kernel.org
Fixes: c2ff29e99a76 ("siw: Inline do_tcp_sendpages()")
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202507220801.50a7210-lkp@intel.com
Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Pedro Falcato <pfalcato@suse.de>
Acked-by: Bernard Metzler <bernard.metzler@linux.dev>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Commit 7918bb2d19c9 ("vhost: basic in order support") introduces
vq->nheads to store the number of batched used buffers per used elem
but it forgets to initialize the vq->nheads to NULL in
vhost_dev_init() this will cause kfree() that would try to free it
without be allocated if SET_OWNER is not called.
Reported-by: JAEHOON KIM <jhkim@linux.ibm.com>
Reported-by: Breno Leitao <leitao@debian.org>
Fixes: 45347e79b544 ("vhost: basic in order support")
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20250729073916.80647-1-jasowang@redhat.com>
Reviewed-by: Dawid Osuchowski <dawid.osuchowski@linux.intel.com>
Tested-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Tested-by: Jaehoon Kim <jhkim@linux.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
GICv5 LPI interrupts have an active state hence they cannot retrigger
while the interrupt is being handled.
Therefore, setting the IRQD_RESEND_WHEN_IN_PROGRESS flag on LPIs is
pointless, as the situation this flag caters for cannot happen.
Remove it.
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/all/20250801-gic-v5-fixes-6-17-v1-3-4fcedaccf9e6@kernel.org
|
|
The 0-day bot reported that on the failure path the driver iounmap()s IWB
resources that are managed through devm_ioremap(), which is clearly wrong
because the driver would end up unmapping the MMIO resource twice on
probing failure.
Fix this by removing the error path altogether and by letting devres manage
the iounmapping on clean-up.
Fixes: 695949d8b16f ("irqchip/gic-v5: Add GICv5 IWB support")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/all/20250801-gic-v5-fixes-6-17-v1-1-4fcedaccf9e6@kernel.org
Closes: https://lore.kernel.org/oe-kbuild-all/202508010038.N3r4ZmII-lkp@intel.com
|
|
When a kexec'ed kernel boots up, there might be stale unhandled interrupts
pending in the interrupt controller. These are delivered as spurious
interrupts once the boot CPU enables interrupts.
Clear all pending interrupts when the driver is initialized to prevent
these spurious interrupts from locking the CPU in an endless loop.
Signed-off-by: Elad Nachman <enachman@marvell.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250803102548.669682-2-enachman@marvell.com
|
|
Commit 8b65db1e93a2 ("irqchip/msi-lib: Add IRQ_DOMAIN_FLAG_FWNODE_PARENT
handling") added logic in msi_lib_irq_domain_select() to match the domain
fwnode against the fwnode parent of the fwspec.fwnode.
The fwnode_get_parent() caller must call fwnode_handle_put() on the
returned pointer value, lest fwnode refcounting for the parent ends up
being out of kilter.
Fix this by relying on the fwnode_handle clean-up handlers and by
incrementing the fwnode refcount regardless of whether parent matching is
used or not (the domain selection code already holds a reference before
calling msi_lib_irq_domain_select() but to make the exit path more uniform
if IRQ_DOMAIN_FLAG_FWNODE_PARENT is not set fwnode_handle_get() is called
again on fwspec.fwnode so that the clean-up code is the same for the two
matching patterns).
Fixes: 8b65db1e93a2 ("irqchip/msi-lib: Add IRQ_DOMAIN_FLAG_FWNODE_PARENT handling")
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250804145553.795065-1-lpieralisi@kernel.org
|
|
smatch warns about a dereference before check:
drivers/irqchip/irq-riscv-imsic-platform.c:317 imsic_irqdomain_init() warn: variable dereferenced before check 'imsic' (see line 311)
Cure it by moving the firmware not assignement after the checks.
Fixes: 59422904dd98 ("irqchip/riscv-imsic: Convert to msi_create_parent_irq_domain() helper")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Closes: https://lore.kernel.org/r/202507311953.NFVZkr0a-lkp@intel.com/ ---
drivers/irqchip/irq-riscv-imsic-platform.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
|
|
When making ZL3073X invisible, it was overlooked that ZL3073X depends on
NET, while ZL3073X_I2C and ZL3073X_SPI do not, causing:
WARNING: unmet direct dependencies detected for ZL3073X when selected by ZL3073X_I2C
WARNING: unmet direct dependencies detected for ZL3073X when selected by ZL3073X_SPI
WARNING: unmet direct dependencies detected for ZL3073X
Depends on [n]: NET [=n]
Selected by [y]:
- ZL3073X_I2C [=y] && I2C [=y]
Selected by [y]:
- ZL3073X_SPI [=y] && SPI [=y]
Fix this by adding the missing dependencies to ZL3073X_I2C and
ZL3073X_SPI.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202508022110.nTqZ5Ylu-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202508022351.NHIxPF8j-lkp@intel.com/
Fixes: a4f0866e3dbbf3fe ("dpll: Make ZL3073X invisible")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Ivan Vecera <ivecera@redhat.com>
Link: https://patch.msgid.link/20250802155302.3673457-1-geert+renesas@glider.be
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This reverts commit 3b98c9352511db627b606477fc7944b2fa53a165.
Russell says:
Using devm_*() [here] is completely wrong, because this is called
from mdiobus_register_device(). This is not the probe function
for the device, and thus there is no code to trigger the release of
the resource on unregistration.
Moreover, when the mdiodev is eventually probed, if the driver fails
or the driver is unbound, the GPIO will be released, but a reference
will be left behind.
Using devm* with a struct device that is *not* currently being probed
is fundamentally wrong - an abuse of devm.
Reported-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/95449490-fa58-41d4-9493-c9213c1f2e7d@sirena.org.uk
Suggested-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Fixes: 3b98c9352511 ("net: mdio_bus: Use devm for getting reset GPIO")
Link: https://patch.msgid.link/20250801212742.2607149-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
benet crashes as soon as SRIOV VFs are created:
kernel BUG at mm/vmalloc.c:3457!
Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI
CPU: 4 UID: 0 PID: 7408 Comm: test.sh Kdump: loaded Not tainted 6.16.0+ #1 PREEMPT(voluntary)
[...]
RIP: 0010:vunmap+0x5f/0x70
[...]
Call Trace:
<TASK>
__iommu_dma_free+0xe8/0x1c0
be_cmd_set_mac_list+0x3fe/0x640 [be2net]
be_cmd_set_mac+0xaf/0x110 [be2net]
be_vf_eth_addr_config+0x19f/0x330 [be2net]
be_vf_setup+0x4f7/0x990 [be2net]
be_pci_sriov_configure+0x3a1/0x470 [be2net]
sriov_numvfs_store+0x20b/0x380
kernfs_fop_write_iter+0x354/0x530
vfs_write+0x9b9/0xf60
ksys_write+0xf3/0x1d0
do_syscall_64+0x8c/0x3d0
be_cmd_set_mac_list() calls dma_free_coherent() under a spin_lock_bh.
Fix it by freeing only after the lock has been released.
Fixes: 1a82d19ca2d6 ("be2net: fix sleeping while atomic bugs in be_ndo_bridge_getlink")
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20250801101338.72502-1-mschmidt@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Introduce missing MODULE_FIRMWARE definitions for firmware autoload.
Fixes: 23290c7bc190d ("net: airoha: Introduce Airoha NPU support")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250801-airoha-npu-missing-module-firmware-v2-1-e860c824d515@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There are multiple drivers that use the qualcomm mdt loader, but they
have conflicting ideas of how to deal with that dependency when compile-testing
for non-qualcomm targets:
IPA only enables the MDT loader when the kernel config includes ARCH_QCOM,
but the newly added ath12k support always enables it, which leads to a
link failure with the combination of IPA=y and ATH12K=m:
aarch64-linux-ld: drivers/net/ipa/ipa_main.o: in function `ipa_firmware_load':
ipa_main.c:(.text.unlikely+0x134): undefined reference to `qcom_mdt_load
The ATH12K method seems more reliable here, so change IPA over to do the same
thing.
Fixes: 38a4066f593c ("net: ipa: support COMPILE_TEST")
Fixes: c0dd3f4f7091 ("wifi: ath12k: enable ath12k AHB support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20250731080024.2054904-1-arnd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
CI hit a UaF in fbnic in the AF_XDP portion of the queues.py test.
The UaF is in the __sk_mark_napi_id_once() call in xsk_bind(),
NAPI has been freed. Looks like the device failed to open earlier,
and we lack clearing the NAPI pointer from the queue.
Fixes: 557d02238e05 ("eth: fbnic: centralize the queue count and NAPI<>queue setting")
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250728163129.117360-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull more i2c updates from Wolfram Sang:
"A few more patches from I2C. Some are fixes which would be nice to
have in rc1 already, some patches have nearly been fallen through the
cracks, some just needed a bit more testing.
- acpi: enable 100kHz workaround for DLL0945
- apple: add support for Apple A7–A11, T2 chips; Kconfig update
- mux: mule: fix error handling path
- qcom-geni: fix controller frequency mapping
- stm32f7: add DMA-safe transfer support
- tegra: use controller reset if device reset is missing
- tegra: remove unnecessary dma_sync*() calls"
* tag 'i2c-for-6.17-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: muxes: mule: Fix an error handling path in mule_i2c_mux_probe()
i2c: Force DLL0945 touchpad i2c freq to 100khz
i2c: apple: Drop default ARCH_APPLE in Kconfig
i2c: qcom-geni: fix I2C frequency table to achieve accurate bus rates
dt-bindings: i2c: apple,i2c: Document Apple A7-A11, T2 compatibles
i2c: tegra: Remove dma_sync_*() calls
i2c: tegra: Use internal reset when reset property is not available
i2c: stm32f7: support i2c_*_dma_safe_msg_buf APIs
|
|
This commit fixes a firmware version check for enabling user queue
support in SDMA v7.0. The previous version check (7836028) was
incorrect and could lead to issues with PROTECTED_FENCE_SIGNAL
commands causing register conflicts between MCU_DBG0 and MCU_DBG1.
Fixes: 8c011408ed84 ("drm/amdgpu/sdma7: add ucode version checks for userq support")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 92e2449241516c95aab95eea91faecd0fa2b7ed5)
Cc: stable@vger.kernel.org
|
|
If driver load fails too early, asic_funcs pointer remains unassigned.
Add NULL check to sanitize unwind path.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 582bf7c5158dce16f7dc5b8345b7876bd8031224)
Cc: stable@vger.kernel.org
|
|
This reverts commit 66abb996999de0d440a02583a6e70c2c24deab45.
This broke custom brightness curves but it wasn't obvious because
of other related changes. Custom brightness curves are always
from a 0-255 input signal. The correct fix was to fix the default
value which was done by [1].
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4412
Link: https://lore.kernel.org/amd-gfx/0f094c4b-d2a3-42cd-824c-dc2858a5618d@kernel.org/T/#m69f875a7e69aa22df3370b3e3a9e69f4a61fdaf2
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 6ec8a5cbec751625133461600d0d4950ffd3a214)
Cc: stable@vger.kernel.org
|
|
[Why]
A null pointer dereference vulnerability exists in the AMD display driver's
(DC module) cleanup function dc_destruct().
When display control context (dc->ctx) construction fails
(due to memory allocation failure), this pointer remains NULL.
During subsequent error handling when dc_destruct() is called,
there's no NULL check before dereferencing the perf_trace member
(dc->ctx->perf_trace), causing a kernel null pointer dereference crash.
[How]
Check if dc->ctx is non-NULL before dereferencing.
Link: https://lore.kernel.org/r/tencent_54FF4252EDFB6533090A491A25EEF3EDBF06@qq.com
Co-developed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
(Updated commit text and removed unnecessary error message)
Signed-off-by: Siyang Liu <Security@tencent.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 9dd8e2ba268c636c240a918e0a31e6feaee19404)
Cc: stable@vger.kernel.org
|
|
amdgpu_dm_commit_planes calls update_freesync_state_on_stream only for
the primary plane. If a commit affects a CRTC but not its primary plane,
it would previously not trigger a refresh cycle or affect LFC, violating
current UAPI semantics.
Fixes e.g. atomic commits affecting only the cursor plane being limited
to the minimum refresh rate.
Don't do this for the legacy cursor ioctls though, it would break the
UAPI semantics for those.
Suggested-by: Xaver Hugl <xaver.hugl@kde.org>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3034
Signed-off-by: Michel Dänzer <mdaenzer@redhat.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit cc7bfba95966251b254cb970c21627124da3b7f4)
Cc: stable@vger.kernel.org
|
|
Update the client id mapping so the correct clients
get printed when there is a mmhub page fault.
v2: fix typos spotted by David Wu.
v3: fix additional typo spotted by David.
Reviewed-by: David (Ming Qiang) Wu <David.Wu3@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit e932f4779a2d329841bb9ca70bb80a4bb2d707b6)
Cc: stable@vger.kernel.org
|
|
Update the client id mapping so the correct clients
get printed when there is a mmhub page fault.
Reviewed-by: David (Ming Qiang) Wu <David.Wu3@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 2a2681eda73b99a2c1ee8cdb006099ea5d0c2505)
Cc: stable@vger.kernel.org
|
|
The field job->vm is used in function amdgpu_job_run to get the page
table re-generation counter and decide whether the job should be skipped.
Specifically, function amdgpu_vm_generation checks if the VM is valid for this job to use.
For instance, if a gfx job depends on a cancelled sdma job from entity vm->delayed,
then the gfx job should be skipped.
Fixes: 26c95e838e63 ("drm/amdgpu: set the VM pointer to NULL in amdgpu_job_prepare")
Signed-off-by: YuanShang <YuanShang.Mao@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit ed76936c6b10b547c6df4ca75412331e9ef6d339)
Cc: stable@vger.kernel.org
|
|
Apparently, both DCE 6.0 and 6.4 have 3 PLLs, but PLL0 can only
be used for DP. Make sure to initialize the correct amount of PLLs
in DC for these DCE versions and use PLL0 only for DP.
Also, on DCE 6.0 and 6.4, the PLL0 needs to be powered on at
initialization as opposed to DCE 6.1 and 7.x which use a different
clock source for DFS.
The following functions were used as reference from the old
radeon driver implementation of DCE 6.x:
- radeon_atom_pick_pll
- atombios_crtc_set_disp_eng_pll
Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 35222b5934ec8d762473592ece98659baf6bc48e)
Cc: stable@vger.kernel.org
|
|
dc_clk_mgr_create accidentally overwrites the dce60_clk_mgr
with the dce_clk_mgr, causing incorrect behaviour on DCE6.
Fix it by removing the extra dce_clk_mgr_construct.
Fixes: 62eab49faae7 ("drm/amd/display: hide VGH asic specific structs")
Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit bbddcbe36a686af03e91341b9bbfcca94bd45fb6)
Cc: stable@vger.kernel.org
|
|
GPUs with multi-xcc have multiple MQDs per queue. This patch saves and
restores all the MQDs within the partition.
Signed-off-by: David Yat Sin <David.YatSin@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit a578f2a58c3ab38f0643b1b6e7534af860233cb1)
Cc: stable@vger.kernel.org
|
|
If the SCLK limits have been set before S3 they will not
be restored. The limits are however cached in the driver and so
they can be restored by running a commit sequence during resume.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20250725031222.3015095-3-superm1@kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 4e9526924d09057a9ba854305e17eded900ced82)
Cc: stable@vger.kernel.org
|
|
The power limit will be cached in smu->current_power_limit but
if the ASIC goes into S3 this value won't be restored.
Restore the value during SMU resume.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20250725031222.3015095-2-superm1@kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 26a609e053a6fc494403e95403bc6a2470383bec)
Cc: stable@vger.kernel.org
|
|
Use different external revid for GC v9.5.0 SOCs.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 21c6764ed4bfaecad034bc4fd15dd64c5a436325)
Cc: stable@vger.kernel.org
|
|
For GC v9.5.0 SOCs, both CPX and QPX compute modes are also supported in
NPS2 mode.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Acked-by: Mangesh Gadre <Mangesh.Gadre@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 9d1ac25c7f830e0132aa816393b1e9f140e71148)
Cc: stable@vger.kernel.org
|
|
The "*mem" pointer has been added without description, describe it in
the kdoc comment in order to fix the following W=1 warning:
Warning: drivers/spi/spi-mem.c:594 function parameter 'mem' not
described in 'spi_mem_calc_op_duration'
Fixes: a11a51896572 ("spi: spi-mem: Take into account the actual maximum frequency")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202507310409.fnuQ21qb-lkp@intel.com/
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://patch.msgid.link/20250804095013.409700-1-miquel.raynal@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The qcom_spi_program_oob() function uses only the last codeword to write
the OOB data into the flash, but it sets the CW_PER_PAGE field in the
CFG0 register as it would use all codewords.
It seems that this confuses the hardware somehow, and any access to the
flash fails with a timeout error after the function is called. The problem
can be easily reproduced with the following commands:
# dd if=/dev/zero bs=2176 count=1 > /tmp/test.bin
1+0 records in
1+0 records out
# flash_erase /dev/mtd4 0 0
Erasing 128 Kibyte @ 0 -- 100 % complete
# nandwrite -O /dev/mtd4 /tmp/test.bin
Writing data to block 0 at offset 0x0
# nanddump -o /dev/mtd4 >/dev/null
ECC failed: 0
ECC corrected: 0
Number of bad blocks: 0
Number of bbt blocks: 0
Block size 131072, page size 2048, OOB size 128
Dumping data starting at 0x00000000 and ending at 0x00020000...
[ 33.197605] qcom_snand 79b0000.spi: failure to read oob
libmtd: error!: MEMREADOOB64 ioctl failed for mtd4, offset 0 (eraseblock 0)
error 110 (Operation timed out)
[ 35.277582] qcom_snand 79b0000.spi: failure in submitting cmd descriptor
libmtd: error!: cannot read 2048 bytes from mtd4 (eraseblock 0, offset 2048)
error 110 (Operation timed out)
nanddump: error!: mtd_read
Change the code to use the correct CW_PER_PAGE value to avoid this.
Fixes: 7304d1909080 ("spi: spi-qpic: add driver for QCOM SPI NAND flash Interface")
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Link: https://patch.msgid.link/20250801-qpic-snand-oob-cwpp-fix-v1-1-f5a41b86af2e@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This driver, for the time being, assumes that the kernel page size is 4kB,
so it fails on loong64 and aarch64 with 16kB pages, and ppc64el with 64kB
pages.
Signed-off-by: Simon Richter <Simon.Richter@hogyros.de>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Cc: stable@vger.kernel.org # v6.8+
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://lore.kernel.org/r/20250802024152.3021-1-Simon.Richter@hogyros.de
(cherry picked from commit 0521a868222ffe636bf202b6e9d29292c1e19c62)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
The PF driver might be resumed just to configure VFs, but since
it is doing some asynchronous GuC reconfigurations after fresh
reset, we should wait until all pending works are completed.
This is especially important in case of LMEM provisioning, since
we also need to update the LMTT and send invalidation requests
to all GuCs, which are expected to be already in the VGT mode.
Fixes: 68ae022278a1 ("drm/xe/pf: Force GuC virtualization mode")
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Cc: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://lore.kernel.org/r/20250801142822.180530-3-michal.wajdeczko@intel.com
(cherry picked from commit c6c86441c465ea440dfb5039f1c26e629a6fd64c)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
We can't let restart worker run once device is removed, since other
data that it might want to access could be already released.
Explicitly disable worker as part of device cleanup action.
Fixes: a4d1c5d0b99b ("drm/xe/pf: Move VFs reprovisioning to worker")
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Cc: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://lore.kernel.org/r/20250801142822.180530-2-michal.wajdeczko@intel.com
(cherry picked from commit a424353937c24554bb242a6582ed8f018b4a411c)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Doing devcoredump initializing before GT though look harmless, it leads
to problem during driver unbind. Because of this order, GT/Engine
release functions will be called before xe devcoredump release function
(xe_driver_devcoredump_fini) leading to the following kernel crash[1]
because the devcoredump functions might still use GT/Engine
datastructures after those are freed.
The following crash is observed while running the IGT
xe_wedged@wedged-at-any-timeout. The test forces a wedged state by
submitting a workload which hangs. Then does a unbind/rebind of the
driver to recover from the wedged state.
The hanged workload leads to a devcoredump. The following crash is
noticed when the devcoredump capture races with the driver unbind.
During driver unbind, the release function hw_engine_fini() will be
called which assigns NULL to hwe->gt. But the same data structure is
accessed during the coredump capture in the function
xe_engine_snapshot_print by reading snapshot->hwe->gt.
With this patch, we make sure the devcoredump is stopped before
deinitializing the core driver functions.
[1]:
BUG: kernel NULL pointer dereference, address: 0000000000000000
Workqueue: events_unbound xe_devcoredump_deferred_snap_work [xe]
RIP: 0010:xe_engine_snapshot_print+0x47/0x420 [xe]
Call Trace:
<TASK>
? drm_printf+0x64/0x90
__xe_devcoredump_read+0x23f/0x2d0 [xe]
? __pfx___drm_printfn_coredump+0x10/0x10
? __pfx___drm_puts_coredump+0x10/0x10
xe_devcoredump_deferred_snap_work+0x17a/0x190 [xe]
process_one_work+0x22e/0x6f0
worker_thread+0x1e8/0x3d0
? __pfx_worker_thread+0x10/0x10
kthread+0x11f/0x250
? __pfx_kthread+0x10/0x10
ret_from_fork+0x47/0x70
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
v2: Detailed commit description (Rodrigo)
v3: FIXME added (Rodrigo, Stuart)
Fixes: 4209d635a823 ("drm/xe: Remove devcoredump during driver release")
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Link: https://lore.kernel.org/r/20250731061300.14320-1-balasubramani.vivekanandan@intel.com
Signed-off-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Link: https://lore.kernel.org/r/20250801052356.21885-1-balasubramani.vivekanandan@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 1fdc4c381ff765479d76ccf3134717c430c871b8)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mikulas Patocka:
- fix checking for request-based stackable devices (dm-table)
- fix corrupt_bio_byte setup checks (dm-flakey)
- add support for resync w/o metadata devices (dm raid)
- small code simplification (dm, dm-mpath, vm-vdo, dm-raid)
- remove support for asynchronous hashes (dm-verity)
- close smatch warning (dm-zoned-target)
- update the documentation and enable inline-crypto passthrough
(dm-thin)
* tag 'for-6.17/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm: set DM_TARGET_PASSES_CRYPTO feature for dm-thin
dm-thin: update the documentation
dm-raid: do not include dm-core.h
vdo: omit need_resched() before cond_resched()
md: dm-zoned-target: Initialize return variable r to avoid uninitialized use
dm-verity: remove support for asynchronous hashes
dm-mpath: don't print the "loaded" message if registering fails
dm-mpath: make dm_unregister_path_selector return void
dm: ima: avoid extra calls to strlen()
dm: Simplify dm_io_complete()
dm: Remove unnecessary return in dm_zone_endio()
dm raid: add support for resync w/o metadata devices
dm-flakey: Fix corrupt_bio_byte setup checks
dm-table: fix checking for rq stackable devices
|
