summaryrefslogtreecommitdiff
path: root/include/linux/netdevice.h
AgeCommit message (Collapse)Author
2022-04-07net: extract a few internals from netdevice.hJakub Kicinski
There's a number of functions and static variables used under net/core/ but not from the outside. We currently dump most of them into netdevice.h. That bad for many reasons: - netdevice.h is very cluttered, hard to figure out what the APIs are; - netdevice.h is very long; - we have to touch netdevice.h more which causes expensive incremental builds. Create a header under net/core/ and move some declarations. The new header is also a bit of a catch-all but that's fine, if we create more specific headers people will likely over-think where their declaration fit best. And end up putting them in netdevice.h, again. More work should be done on splitting netdevice.h into more targeted headers, but that'd be more time consuming so small steps. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-06net: ethernet: mtk_eth_soc: implement flow offloading to WED devicesFelix Fietkau
This allows hardware flow offloading from Ethernet to WLAN on MT7622 SoC Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-05net: ensure net_todo_list is processed quicklyJohannes Berg
In [1], Will raised a potential issue that the cfg80211 code, which does (from a locking perspective) rtnl_lock() wiphy_lock() rtnl_unlock() might be suspectible to ABBA deadlocks, because rtnl_unlock() calls netdev_run_todo(), which might end up calling rtnl_lock() again, which could then deadlock (see the comment in the code added here for the scenario). Some back and forth and thinking ensued, but clearly this can't happen if the net_todo_list is empty at the rtnl_unlock() here. Clearly, the code here cannot actually put an entry on it, and all other users of rtnl_unlock() will empty it since that will always go through netdev_run_todo(), emptying the list. So the only other way to get there would be to add to the list and then unlock the RTNL without going through rtnl_unlock(), which is only possible through __rtnl_unlock(). However, this isn't exported and not used in many places, and none of them seem to be able to unregister before using it. Therefore, add a WARN_ON() in the code to ensure this invariant won't be broken, so that the cfg80211 (or any similar) code stays safe. [1] https://lore.kernel.org/r/Yjzpo3TfZxtKPMAG@google.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://lore.kernel.org/r/20220404113847.0ee02e4a70da.Ic73d206e217db20fd22dcec14fe5442ca732804b@changeid Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-28net: move net_unlink_todo() out of the headerJohannes Berg
There's no reason for this to be in netdevice.h, it's all just used in dev.c. Also make it no longer inline and let the compiler decide to do that by itself. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://lore.kernel.org/r/20220325225023.f49b9056fe1c.I6b901a2df00000837a9bd251a8dd259bd23f5ded@changeid Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-22netdevice: add missing dm_private kdocJakub Kicinski
Building htmldocs complains: include/linux/netdevice.h:2295: warning: Function parameter or member 'dm_private' not described in 'net_device' Fixes: b26ef81c46ed ("drop_monitor: remove quadratic behavior") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20220322051053.1883186-1-kuba@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-03-18net: set default rss queues num to physical cores / 2Íñigo Huguet
Network drivers can call to netif_get_num_default_rss_queues to get the default number of receive queues to use. Right now, this default number is min(8, num_online_cpus()). Instead, as suggested by Jakub, use the number of physical cores divided by 2 as a way to avoid wasting CPU resources and to avoid using both CPU threads, but still allowing to scale for high-end processors with many cores. As an exception, select 2 queues for processors with 2 cores, because otherwise it won't take any advantage of RSS despite being SMP capable. Tested: Processor Intel Xeon E5-2620 (2 sockets, 6 cores/socket, 2 threads/core). NIC Broadcom NetXtreme II BCM57810 (10GBps). Ran some tests with `perf stat iperf3 -R`, with parallelisms of 1, 8 and 24, getting the following results: - Number of queues: 6 (instead of 8) - Network throughput: not affected - CPU usage: utilized 0.05-0.12 CPUs more than before (having 24 CPUs this is only 0.2-0.5% higher) - Reduced the number of context switches by 7-50%, being more noticeable when using a higher number of parallel threads. Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Íñigo Huguet <ihuguet@redhat.com> Link: https://lore.kernel.org/r/20220315091832.13873-1-ihuguet@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-14net: disable preemption in dev_core_stats_XXX_inc() helpersEric Dumazet
syzbot was kind enough to remind us that dev->{tx_dropped|rx_dropped} could be increased in process context. BUG: using smp_processor_id() in preemptible [00000000] code: syz-executor413/3593 caller is netdev_core_stats_alloc+0x98/0x110 net/core/dev.c:10298 CPU: 1 PID: 3593 Comm: syz-executor413 Not tainted 5.17.0-rc7-syzkaller-02426-g97aeb877de7f #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 check_preemption_disabled+0x16b/0x170 lib/smp_processor_id.c:49 netdev_core_stats_alloc+0x98/0x110 net/core/dev.c:10298 dev_core_stats include/linux/netdevice.h:3855 [inline] dev_core_stats_rx_dropped_inc include/linux/netdevice.h:3866 [inline] tun_get_user+0x3455/0x3ab0 drivers/net/tun.c:1800 tun_chr_write_iter+0xe1/0x200 drivers/net/tun.c:2015 call_write_iter include/linux/fs.h:2074 [inline] new_sync_write+0x431/0x660 fs/read_write.c:503 vfs_write+0x7cd/0xae0 fs/read_write.c:590 ksys_write+0x12d/0x250 fs/read_write.c:643 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f2cf4f887e3 Code: 5d 41 5c 41 5d 41 5e e9 9b fd ff ff 66 2e 0f 1f 84 00 00 00 00 00 90 64 8b 04 25 18 00 00 00 85 c0 75 14 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 55 c3 0f 1f 40 00 48 83 ec 28 48 89 54 24 18 RSP: 002b:00007ffd50dd5fd8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 00007ffd50dd6000 RCX: 00007f2cf4f887e3 RDX: 000000000000002a RSI: 0000000000000000 RDI: 00000000000000c8 RBP: 0000000000000003 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007ffd50dd5ff0 R14: 00007ffd50dd5fe8 R15: 00007ffd50dd5fe4 </TASK> Fixes: 625788b58445 ("net: add per-cpu storage and net->core_stats") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: jeffreyji <jeffreyji@google.com> Cc: Brian Vazquez <brianvv@google.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Link: https://lore.kernel.org/r/20220312214505.3294762-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-11net: add per-cpu storage and net->core_statsEric Dumazet
Before adding yet another possibly contended atomic_long_t, it is time to add per-cpu storage for existing ones: dev->tx_dropped, dev->rx_dropped, and dev->rx_nohandler Because many devices do not have to increment such counters, allocate the per-cpu storage on demand, so that dev_get_stats() does not have to spend considerable time folding zero counters. Note that some drivers have abused these counters which were supposed to be only used by core networking stack. v4: should use per_cpu_ptr() in dev_get_stats() (Jakub) v3: added a READ_ONCE() in netdev_core_stats_alloc() (Paolo) v2: add a missing include (reported by kernel test robot <lkp@intel.com>) Change in netdev_core_stats_alloc() (Jakub) Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: jeffreyji <jeffreyji@google.com> Reviewed-by: Brian Vazquez <brianvv@google.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Paolo Abeni <pabeni@redhat.com> Link: https://lore.kernel.org/r/20220311051420.2608812-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
net/dsa/dsa2.c commit afb3cc1a397d ("net: dsa: unlock the rtnl_mutex when dsa_master_setup() fails") commit e83d56537859 ("net: dsa: replay master state events in dsa_tree_{setup,teardown}_master") https://lore.kernel.org/all/20220307101436.7ae87da0@canb.auug.org.au/ drivers/net/ethernet/intel/ice/ice.h commit 97b0129146b1 ("ice: Fix error with handling of bonding MTU") commit 43113ff73453 ("ice: add TTY for GNSS module for E810T device") https://lore.kernel.org/all/20220310112843.3233bcf1@canb.auug.org.au/ drivers/staging/gdm724x/gdm_lte.c commit fc7f750dc9d1 ("staging: gdm724x: fix use after free in gdm_lte_rx()") commit 4bcc4249b4cf ("staging: Use netif_rx().") https://lore.kernel.org/all/20220308111043.1018a59d@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-07net: Fix esp GSO on inter address family tunnels.Steffen Klassert
The esp tunnel GSO handlers use skb_mac_gso_segment to push the inner packet to the segmentation handlers. However, skb_mac_gso_segment takes the Ethernet Protocol ID from 'skb->protocol' which is wrong for inter address family tunnels. We fix this by introducing a new skb_eth_gso_segment function. This function can be used if it is necessary to pass the Ethernet Protocol ID directly to the segmentation handler. First users of this function will be the esp4 and esp6 tunnel segmentation handlers. Fixes: c35fe4106b92 ("xfrm: Add mode handlers for IPsec on layer 2") Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2022-03-07net: Remove netif_rx_any_context() and netif_rx_ni().Sebastian Andrzej Siewior
Remove netif_rx_any_context and netif_rx_ni() because there are no more users in tree. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-03net: dev: Add hardware stats supportPetr Machata
Offloading switch device drivers may be able to collect statistics of the traffic taking place in the HW datapath that pertains to a certain soft netdevice, such as VLAN. Add the necessary infrastructure to allow exposing these statistics to the offloaded netdevice in question. The API was shaped by the following considerations: - Collection of HW statistics is not free: there may be a finite number of counters, and the act of counting may have a performance impact. It is therefore necessary to allow toggling whether HW counting should be done for any particular SW netdevice. - As the drivers are loaded and removed, a particular device may get offloaded and unoffloaded again. At the same time, the statistics values need to stay monotonic (modulo the eventual 64-bit wraparound), increasing only to reflect traffic measured in the device. To that end, the netdevice keeps around a lazily-allocated copy of struct rtnl_link_stats64. Device drivers then contribute to the values kept therein at various points. Even as the driver goes away, the struct stays around to maintain the statistics values. - Different HW devices may be able to count different things. The motivation behind this patch in particular is exposure of HW counters on Nvidia Spectrum switches, where the only practical approach to counting traffic on offloaded soft netdevices currently is to use router interface counters, and count L3 traffic. Correspondingly that is the statistics suite added in this patch. Other devices may be able to measure different kinds of traffic, and for that reason, the APIs are built to allow uniform access to different statistics suites. - Because soft netdevices and offloading drivers are only loosely bound, a netdevice uses a notifier chain to communicate with the drivers. Several new notifiers, NETDEV_OFFLOAD_XSTATS_*, have been added to carry messages to the offloading drivers. - Devices can have various conditions for when a particular counter is available. As the device is configured and reconfigured, the device offload may become or cease being suitable for counter binding. A netdevice can use a notifier type NETDEV_OFFLOAD_XSTATS_REPORT_USED to ping offloading drivers and determine whether anyone currently implements a given statistics suite. This information can then be propagated to user space. When the driver decides to unoffload a netdevice, it can use a newly-added function, netdev_offload_xstats_report_delta(), to record outstanding collected statistics, before destroying the HW counter. This patch adds a helper, call_netdevice_notifiers_info_robust(), for dispatching a notifier with the possibility of unwind when one of the consumers bails. Given the wish to eventually get rid of the global notifier block altogether, this helper only invokes the per-netns notifier block. Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-23drop_monitor: remove quadratic behaviorEric Dumazet
drop_monitor is using an unique list on which all netdevices in the host have an element, regardless of their netns. This scales poorly, not only at device unregister time (what I caught during my netns dismantle stress tests), but also at packet processing time whenever trace_napi_poll_hit() is called. If the intent was to avoid adding one pointer in 'struct net_device' then surely we prefer O(1) behavior. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-14net: dev: Makes sure netif_rx() can be invoked in any context.Sebastian Andrzej Siewior
Dave suggested a while ago (eleven years by now) "Let's make netif_rx() work in all contexts and get rid of netif_rx_ni()". Eric agreed and pointed out that modern devices should use netif_receive_skb() to avoid the overhead. In the meantime someone added another variant, netif_rx_any_context(), which behaves as suggested. netif_rx() must be invoked with disabled bottom halves to ensure that pending softirqs, which were raised within the function, are handled. netif_rx_ni() can be invoked only from process context (bottom halves must be enabled) because the function handles pending softirqs without checking if bottom halves were disabled or not. netif_rx_any_context() invokes on the former functions by checking in_interrupts(). netif_rx() could be taught to handle both cases (disabled and enabled bottom halves) by simply disabling bottom halves while invoking netif_rx_internal(). The local_bh_enable() invocation will then invoke pending softirqs only if the BH-disable counter drops to zero. Eric is concerned about the overhead of BH-disable+enable especially in regard to the loopback driver. As critical as this driver is, it will receive a shortcut to avoid the additional overhead which is not needed. Add a local_bh_disable() section in netif_rx() to ensure softirqs are handled if needed. Provide __netif_rx() which does not disable BH and has a lockdep assert to ensure that interrupts are disabled. Use this shortcut in the loopback driver and in drivers/net/*.c. Make netif_rx_ni() and netif_rx_any_context() invoke netif_rx() so they can be removed once they are no more users left. Link: https://lkml.kernel.org/r/20100415.020246.218622820.davem@davemloft.net Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-14net_sched: add __rcu annotation to netdev->qdiscEric Dumazet
syzbot found a data-race [1] which lead me to add __rcu annotations to netdev->qdisc, and proper accessors to get LOCKDEP support. [1] BUG: KCSAN: data-race in dev_activate / qdisc_lookup_rcu write to 0xffff888168ad6410 of 8 bytes by task 13559 on cpu 1: attach_default_qdiscs net/sched/sch_generic.c:1167 [inline] dev_activate+0x2ed/0x8f0 net/sched/sch_generic.c:1221 __dev_open+0x2e9/0x3a0 net/core/dev.c:1416 __dev_change_flags+0x167/0x3f0 net/core/dev.c:8139 rtnl_configure_link+0xc2/0x150 net/core/rtnetlink.c:3150 __rtnl_newlink net/core/rtnetlink.c:3489 [inline] rtnl_newlink+0xf4d/0x13e0 net/core/rtnetlink.c:3529 rtnetlink_rcv_msg+0x745/0x7e0 net/core/rtnetlink.c:5594 netlink_rcv_skb+0x14e/0x250 net/netlink/af_netlink.c:2494 rtnetlink_rcv+0x18/0x20 net/core/rtnetlink.c:5612 netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline] netlink_unicast+0x602/0x6d0 net/netlink/af_netlink.c:1343 netlink_sendmsg+0x728/0x850 net/netlink/af_netlink.c:1919 sock_sendmsg_nosec net/socket.c:705 [inline] sock_sendmsg net/socket.c:725 [inline] ____sys_sendmsg+0x39a/0x510 net/socket.c:2413 ___sys_sendmsg net/socket.c:2467 [inline] __sys_sendmsg+0x195/0x230 net/socket.c:2496 __do_sys_sendmsg net/socket.c:2505 [inline] __se_sys_sendmsg net/socket.c:2503 [inline] __x64_sys_sendmsg+0x42/0x50 net/socket.c:2503 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae read to 0xffff888168ad6410 of 8 bytes by task 13560 on cpu 0: qdisc_lookup_rcu+0x30/0x2e0 net/sched/sch_api.c:323 __tcf_qdisc_find+0x74/0x3a0 net/sched/cls_api.c:1050 tc_del_tfilter+0x1c7/0x1350 net/sched/cls_api.c:2211 rtnetlink_rcv_msg+0x5ba/0x7e0 net/core/rtnetlink.c:5585 netlink_rcv_skb+0x14e/0x250 net/netlink/af_netlink.c:2494 rtnetlink_rcv+0x18/0x20 net/core/rtnetlink.c:5612 netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline] netlink_unicast+0x602/0x6d0 net/netlink/af_netlink.c:1343 netlink_sendmsg+0x728/0x850 net/netlink/af_netlink.c:1919 sock_sendmsg_nosec net/socket.c:705 [inline] sock_sendmsg net/socket.c:725 [inline] ____sys_sendmsg+0x39a/0x510 net/socket.c:2413 ___sys_sendmsg net/socket.c:2467 [inline] __sys_sendmsg+0x195/0x230 net/socket.c:2496 __do_sys_sendmsg net/socket.c:2505 [inline] __se_sys_sendmsg net/socket.c:2503 [inline] __x64_sys_sendmsg+0x42/0x50 net/socket.c:2503 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae value changed: 0xffffffff85dee080 -> 0xffff88815d96ec00 Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 13560 Comm: syz-executor.2 Not tainted 5.17.0-rc3-syzkaller-00116-gf1baf68e1383-dirty #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Fixes: 470502de5bdb ("net: sched: unlock rules update API") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Vlad Buslov <vladbu@mellanox.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-08net: add dev->dev_registered_trackerEric Dumazet
Convert one dev_hold()/dev_put() pair in register_netdevice() and unregister_netdevice_many() to dev_hold_track() and dev_put_track(). This would allow to detect a rogue dev_put() a bit earlier. Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20220207184107.1401096-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-05net: refine dev_put()/dev_hold() debuggingEric Dumazet
We are still chasing some syzbot reports where we think a rogue dev_put() is called with no corresponding prior dev_hold(). Unfortunately it eats a reference on dev->dev_refcnt taken by innocent dev_hold_track(), meaning that the refcount saturation splat comes too late to be useful. Make sure that 'not tracked' dev_put() and dev_hold() better use CONFIG_NET_DEV_REFCNT_TRACKER=y debug infrastructure: Prior patch in the series allowed ref_tracker_alloc() and ref_tracker_free() to be called with a NULL @trackerp parameter, and to use a separate refcount only to detect too many put() even in the following case: dev_hold_track(dev, tracker_1, GFP_ATOMIC); dev_hold(dev); dev_put(dev); dev_put(dev); // Should complain loudly here. dev_put_track(dev, tracker_1); // instead of here Add clarification about netdev_tracker_alloc() role. v2: I replaced the dev_put() in linkwatch_do_dev() with __dev_put() because callers called netdev_tracker_free(). Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-20net: fix information leakage in /proc/net/ptypeCongyu Liu
In one net namespace, after creating a packet socket without binding it to a device, users in other net namespaces can observe the new `packet_type` added by this packet socket by reading `/proc/net/ptype` file. This is minor information leakage as packet socket is namespace aware. Add a net pointer in `packet_type` to keep the net namespace of of corresponding packet socket. In `ptype_seq_show`, this net pointer must be checked when it is not NULL. Fixes: 2feb27dbe00c ("[NETNS]: Minor information leak via /proc/net/ptype file.") Signed-off-by: Congyu Liu <liu3101@purdue.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-06gro: add ability to control gro max packet sizeCoco Li
Eric Dumazet suggested to allow users to modify max GRO packet size. We have seen GRO being disabled by users of appliances (such as wifi access points) because of claimed bufferbloat issues, or some work arounds in sch_cake, to split GRO/GSO packets. Instead of disabling GRO completely, one can chose to limit the maximum packet size of GRO packets, depending on their latency constraints. This patch adds a per device gro_max_size attribute that can be changed with ip link command. ip link set dev eth0 gro_max_size 16000 Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Coco Li <lixiaoyan@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-30net: remove references to CONFIG_IRDA in network header filesLukas Bulwahn
Commit d64c2a76123f ("staging: irda: remove the irda network stack and drivers") removes the config IRDA. Remove the remaining references to this non-existing config in the network header files. Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Link: https://lore.kernel.org/r/20211229113620.19368-1-lukas.bulwahn@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
include/net/sock.h commit 8f905c0e7354 ("inet: fully convert sk->sk_rx_dst to RCU rules") commit 43f51df41729 ("net: move early demux fields close to sk_refcnt") https://lore.kernel.org/all/20211222141641.0caa0ab3@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-19flow_offload: allow user to offload tc action to net deviceBaowen Zheng
Use flow_indr_dev_register/flow_indr_dev_setup_offload to offload tc action. We need to call tc_cleanup_flow_action to clean up tc action entry since in tc_setup_action, some actions may hold dev refcnt, especially the mirror action. Signed-off-by: Baowen Zheng <baowen.zheng@corigine.com> Signed-off-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-17net: fix typo in a commentXiang wangx
The double 'as' in a comment is repeated, thus it should be removed. Signed-off-by: Xiang wangx <wangxiang@cdjrlc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-15net: add net device refcount tracker to struct packet_typeEric Dumazet
Most notable changes are in af_packet, tipc ones are trivial. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Jon Maloy <jmaloy@redhat.com> Cc: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-14net: dev_replace_track() cleanupEric Dumazet
Use existing helpers (netdev_tracker_free() and netdev_tracker_alloc()) to remove ifdefery. Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20211214151515.312535-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-10net: add networking namespace refcount trackerEric Dumazet
We have 100+ syzbot reports about netns being dismantled too soon, still unresolved as of today. We think a missing get_net() or an extra put_net() is the root cause. In order to find the bug(s), and be able to spot future ones, this patch adds CONFIG_NET_NS_REFCNT_TRACKER and new helpers to precisely pair all put_net() with corresponding get_net(). To use these helpers, each data structure owning a refcount should also use a "netns_tracker" to pair the get and put. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-07net: watchdog: add net device refcount trackerEric Dumazet
Add a netdevice_tracker inside struct net_device, to track the self reference when a device has an active watchdog timer. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-06net: linkwatch: add net device refcount trackerEric Dumazet
Add a netdevice_tracker inside struct net_device, to track the self reference when a device is in lweventlist. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-06net: dst: add net device refcount tracking to dst_entryEric Dumazet
We want to track all dev_hold()/dev_put() to ease leak hunting. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-06net: add net device refcount tracker to struct netdev_queueEric Dumazet
This will help debugging pesky netdev reference leaks. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-06net: add net device refcount tracker to struct netdev_rx_queueEric Dumazet
This helps debugging net device refcount leaks. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-06net: add net device refcount tracker infrastructureEric Dumazet
net device are refcounted. Over the years we had numerous bugs caused by imbalanced dev_hold() and dev_put() calls. The general idea is to be able to precisely pair each decrement with a corresponding prior increment. Both share a cookie, basically a pointer to private data storing stack traces. This patch adds dev_hold_track() and dev_put_track(). To use these helpers, each data structure owning a refcount should also use a "netdevice_tracker" to pair the hold and put. netdevice_tracker dev_tracker; ... dev_hold_track(dev, &dev_tracker, GFP_ATOMIC); ... dev_put_track(dev, &dev_tracker); Whenever a leak happens, we will get precise stack traces of the point dev_hold_track() happened, at device dismantle phase. We will also get a stack trace if too many dev_put_track() for the same netdevice_tracker are attempted. This is guarded by CONFIG_NET_DEV_REFCNT_TRACKER option. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-01net: annotate data-races on txq->xmit_lock_ownerEric Dumazet
syzbot found that __dev_queue_xmit() is reading txq->xmit_lock_owner without annotations. No serious issue there, let's document what is happening there. BUG: KCSAN: data-race in __dev_queue_xmit / __dev_queue_xmit write to 0xffff888139d09484 of 4 bytes by interrupt on cpu 0: __netif_tx_unlock include/linux/netdevice.h:4437 [inline] __dev_queue_xmit+0x948/0xf70 net/core/dev.c:4229 dev_queue_xmit_accel+0x19/0x20 net/core/dev.c:4265 macvlan_queue_xmit drivers/net/macvlan.c:543 [inline] macvlan_start_xmit+0x2b3/0x3d0 drivers/net/macvlan.c:567 __netdev_start_xmit include/linux/netdevice.h:4987 [inline] netdev_start_xmit include/linux/netdevice.h:5001 [inline] xmit_one+0x105/0x2f0 net/core/dev.c:3590 dev_hard_start_xmit+0x72/0x120 net/core/dev.c:3606 sch_direct_xmit+0x1b2/0x7c0 net/sched/sch_generic.c:342 __dev_xmit_skb+0x83d/0x1370 net/core/dev.c:3817 __dev_queue_xmit+0x590/0xf70 net/core/dev.c:4194 dev_queue_xmit+0x13/0x20 net/core/dev.c:4259 neigh_hh_output include/net/neighbour.h:511 [inline] neigh_output include/net/neighbour.h:525 [inline] ip6_finish_output2+0x995/0xbb0 net/ipv6/ip6_output.c:126 __ip6_finish_output net/ipv6/ip6_output.c:191 [inline] ip6_finish_output+0x444/0x4c0 net/ipv6/ip6_output.c:201 NF_HOOK_COND include/linux/netfilter.h:296 [inline] ip6_output+0x10e/0x210 net/ipv6/ip6_output.c:224 dst_output include/net/dst.h:450 [inline] NF_HOOK include/linux/netfilter.h:307 [inline] ndisc_send_skb+0x486/0x610 net/ipv6/ndisc.c:508 ndisc_send_rs+0x3b0/0x3e0 net/ipv6/ndisc.c:702 addrconf_rs_timer+0x370/0x540 net/ipv6/addrconf.c:3898 call_timer_fn+0x2e/0x240 kernel/time/timer.c:1421 expire_timers+0x116/0x240 kernel/time/timer.c:1466 __run_timers+0x368/0x410 kernel/time/timer.c:1734 run_timer_softirq+0x2e/0x60 kernel/time/timer.c:1747 __do_softirq+0x158/0x2de kernel/softirq.c:558 __irq_exit_rcu kernel/softirq.c:636 [inline] irq_exit_rcu+0x37/0x70 kernel/softirq.c:648 sysvec_apic_timer_interrupt+0x3e/0xb0 arch/x86/kernel/apic/apic.c:1097 asm_sysvec_apic_timer_interrupt+0x12/0x20 read to 0xffff888139d09484 of 4 bytes by interrupt on cpu 1: __dev_queue_xmit+0x5e3/0xf70 net/core/dev.c:4213 dev_queue_xmit_accel+0x19/0x20 net/core/dev.c:4265 macvlan_queue_xmit drivers/net/macvlan.c:543 [inline] macvlan_start_xmit+0x2b3/0x3d0 drivers/net/macvlan.c:567 __netdev_start_xmit include/linux/netdevice.h:4987 [inline] netdev_start_xmit include/linux/netdevice.h:5001 [inline] xmit_one+0x105/0x2f0 net/core/dev.c:3590 dev_hard_start_xmit+0x72/0x120 net/core/dev.c:3606 sch_direct_xmit+0x1b2/0x7c0 net/sched/sch_generic.c:342 __dev_xmit_skb+0x83d/0x1370 net/core/dev.c:3817 __dev_queue_xmit+0x590/0xf70 net/core/dev.c:4194 dev_queue_xmit+0x13/0x20 net/core/dev.c:4259 neigh_resolve_output+0x3db/0x410 net/core/neighbour.c:1523 neigh_output include/net/neighbour.h:527 [inline] ip6_finish_output2+0x9be/0xbb0 net/ipv6/ip6_output.c:126 __ip6_finish_output net/ipv6/ip6_output.c:191 [inline] ip6_finish_output+0x444/0x4c0 net/ipv6/ip6_output.c:201 NF_HOOK_COND include/linux/netfilter.h:296 [inline] ip6_output+0x10e/0x210 net/ipv6/ip6_output.c:224 dst_output include/net/dst.h:450 [inline] NF_HOOK include/linux/netfilter.h:307 [inline] ndisc_send_skb+0x486/0x610 net/ipv6/ndisc.c:508 ndisc_send_rs+0x3b0/0x3e0 net/ipv6/ndisc.c:702 addrconf_rs_timer+0x370/0x540 net/ipv6/addrconf.c:3898 call_timer_fn+0x2e/0x240 kernel/time/timer.c:1421 expire_timers+0x116/0x240 kernel/time/timer.c:1466 __run_timers+0x368/0x410 kernel/time/timer.c:1734 run_timer_softirq+0x2e/0x60 kernel/time/timer.c:1747 __do_softirq+0x158/0x2de kernel/softirq.c:558 __irq_exit_rcu kernel/softirq.c:636 [inline] irq_exit_rcu+0x37/0x70 kernel/softirq.c:648 sysvec_apic_timer_interrupt+0x8d/0xb0 arch/x86/kernel/apic/apic.c:1097 asm_sysvec_apic_timer_interrupt+0x12/0x20 kcsan_setup_watchpoint+0x94/0x420 kernel/kcsan/core.c:443 folio_test_anon include/linux/page-flags.h:581 [inline] PageAnon include/linux/page-flags.h:586 [inline] zap_pte_range+0x5ac/0x10e0 mm/memory.c:1347 zap_pmd_range mm/memory.c:1467 [inline] zap_pud_range mm/memory.c:1496 [inline] zap_p4d_range mm/memory.c:1517 [inline] unmap_page_range+0x2dc/0x3d0 mm/memory.c:1538 unmap_single_vma+0x157/0x210 mm/memory.c:1583 unmap_vmas+0xd0/0x180 mm/memory.c:1615 exit_mmap+0x23d/0x470 mm/mmap.c:3170 __mmput+0x27/0x1b0 kernel/fork.c:1113 mmput+0x3d/0x50 kernel/fork.c:1134 exit_mm+0xdb/0x170 kernel/exit.c:507 do_exit+0x608/0x17a0 kernel/exit.c:819 do_group_exit+0xce/0x180 kernel/exit.c:929 get_signal+0xfc3/0x1550 kernel/signal.c:2852 arch_do_signal_or_restart+0x8c/0x2e0 arch/x86/kernel/signal.c:868 handle_signal_work kernel/entry/common.c:148 [inline] exit_to_user_mode_loop kernel/entry/common.c:172 [inline] exit_to_user_mode_prepare+0x113/0x190 kernel/entry/common.c:207 __syscall_exit_to_user_mode_work kernel/entry/common.c:289 [inline] syscall_exit_to_user_mode+0x20/0x40 kernel/entry/common.c:300 do_syscall_64+0x50/0xd0 arch/x86/entry/common.c:86 entry_SYSCALL_64_after_hwframe+0x44/0xae value changed: 0x00000000 -> 0xffffffff Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 28712 Comm: syz-executor.0 Tainted: G W 5.16.0-rc1-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Link: https://lore.kernel.org/r/20211130170155.2331929-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-23net: remove .ndo_change_proto_downJakub Kicinski
.ndo_change_proto_down was added seemingly to enable out-of-tree implementations. Over 2.5yrs later we still have no real users upstream. Hardwire the generic implementation for now, we can revert once real users materialize. (rocker is a test vehicle, not a user.) We need to drop the optimization on the sysfs side, because unlike ndos priv_flags will be changed at runtime, so we'd need READ_ONCE/WRITE_ONCE everywhere.. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-22net: annotate accesses to dev->gso_max_segsEric Dumazet
dev->gso_max_segs is written under RTNL protection, or when the device is not yet visible, but is read locklessly. Add netif_set_gso_max_segs() helper. Add the READ_ONCE()/WRITE_ONCE() pairs, and use netif_set_gso_max_segs() where we can to better document what is going on. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-22net: annotate accesses to dev->gso_max_sizeEric Dumazet
dev->gso_max_size is written under RTNL protection, or when the device is not yet visible, but is read locklessly. Add the READ_ONCE()/WRITE_ONCE() pairs, and use netif_set_gso_max_size() where we can to better document what is going on. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-20dev_addr: add a modification checkJakub Kicinski
netdev->dev_addr should only be modified via helpers, but someone may be casting off the const. Add a runtime check to catch abuses. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-20net: constify netdev->dev_addrJakub Kicinski
Commit 406f42fa0d3c ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. We converted all users to make modifications via appropriate helpers, make netdev->dev_addr const. The update helpers need to upcast from the buffer to struct netdev_hw_addr. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-17net: do not inline netif_tx_lock()/netif_tx_unlock()Eric Dumazet
These are not fast path, there is no point in inlining them. Also provide netif_freeze_queues()/netif_unfreeze_queues() so that we can use them from dev_watchdog() in the following patch. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-17net: annotate accesses to queue->trans_startEric Dumazet
In following patches, dev_watchdog() will no longer stop all queues. It will read queue->trans_start locklessly. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-17net: use an atomic_long_t for queue->trans_timeoutEric Dumazet
tx_timeout_show() assumed dev_watchdog() would stop all the queues, to fetch queue->trans_timeout under protection of the queue->_xmit_lock. As we want to no longer disrupt transmits, we use an atomic_long_t instead. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: david decotigny <david.decotigny@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-16net: use .data.once section in netdev_level_once()Eric Dumazet
Same rationale than prior patch : using the dedicated section avoid holes and pack all these bool values. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-16net: gro: populate net/core/gro.cEric Dumazet
Move gro code and data from net/core/dev.c to net/core/gro.c to ease maintenance. gro_normal_list() and gro_normal_one() are inlined because they are called from both files. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-16net: gro: move skb_gro_receive into net/core/gro.cEric Dumazet
net/core/gro.c will contain all core gro functions, to shrink net/core/skbuff.c and net/core/dev.c Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-16net: gro: move skb_gro_receive_list to udp_offload.cEric Dumazet
This helper is used once, no need to keep it in fat net/core/skbuff.c Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-16net: move gro definitions to include/net/gro.hEric Dumazet
include/linux/netdevice.h became too big, move gro stuff into include/net/gro.h Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextDavid S. Miller
Pablo Neira Ayuso says: ==================== Netfilter/IPVS updates for net-next The following patchset contains Netfilter/IPVS for net-next: 1) Add new run_estimation toggle to IPVS to stop the estimation_timer logic, from Dust Li. 2) Relax superfluous dynset check on NFT_SET_TIMEOUT. 3) Add egress hook, from Lukas Wunner. 4) Nowadays, almost all hook functions in x_table land just call the hook evaluation loop. Remove remaining hook wrappers from iptables and IPVS. From Florian Westphal. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-18net: sched: Remove Qdisc::running sequence counterAhmed S. Darwish
The Qdisc::running sequence counter has two uses: 1. Reliably reading qdisc's tc statistics while the qdisc is running (a seqcount read/retry loop at gnet_stats_add_basic()). 2. As a flag, indicating whether the qdisc in question is running (without any retry loops). For the first usage, the Qdisc::running sequence counter write section, qdisc_run_begin() => qdisc_run_end(), covers a much wider area than what is actually needed: the raw qdisc's bstats update. A u64_stats sync point was thus introduced (in previous commits) inside the bstats structure itself. A local u64_stats write section is then started and stopped for the bstats updates. Use that u64_stats sync point mechanism for the bstats read/retry loop at gnet_stats_add_basic(). For the second qdisc->running usage, a __QDISC_STATE_RUNNING bit flag, accessed with atomic bitops, is sufficient. Using a bit flag instead of a sequence counter at qdisc_run_begin/end() and qdisc_is_running() leads to the SMP barriers implicitly added through raw_read_seqcount() and write_seqcount_begin/end() getting removed. All call sites have been surveyed though, and no required ordering was identified. Now that the qdisc->running sequence counter is no longer used, remove it. Note, using u64_stats implies no sequence counter protection for 64-bit architectures. This can lead to the qdisc tc statistics "packets" vs. "bytes" values getting out of sync on rare occasions. The individual values will still be valid. Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>