| Age | Commit message (Collapse) | Author |
|---|
|
The PHY_ID_FMT defines the format specifier "%s:%02x" to form
the PHY ID string, where the maximum of the first part is defined
in MII_BUS_ID_SIZE, including NUL terminator, and the second part
is implied to be 3 as the maximum address is limited to 32, meaning
that 2 hex digits is more than enough, plus ':' (colon) delimiter.
However, some drivers, which are using PHY_ID_FMT, customise buffer
size and do that incorrectly. Introduce a new constant PHY_ID_SIZE
that makes the minimum required size explicit, so drivers are
encouraged to use it.
Suggested-by: "Russell King (Oracle)" <linux@armlinux.org.uk>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/20250324144751.1271761-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If track_pfn_copy() fails, we already added the dst VMA to the maple
tree. As fork() fails, we'll cleanup the maple tree, and stumble over
the dst VMA for which we neither performed any reservation nor copied
any page tables.
Consequently untrack_pfn() will see VM_PAT and try obtaining the
PAT information from the page table -- which fails because the page
table was not copied.
The easiest fix would be to simply clear the VM_PAT flag of the dst VMA
if track_pfn_copy() fails. However, the whole thing is about "simply"
clearing the VM_PAT flag is shaky as well: if we passed track_pfn_copy()
and performed a reservation, but copying the page tables fails, we'll
simply clear the VM_PAT flag, not properly undoing the reservation ...
which is also wrong.
So let's fix it properly: set the VM_PAT flag only if the reservation
succeeded (leaving it clear initially), and undo the reservation if
anything goes wrong while copying the page tables: clearing the VM_PAT
flag after undoing the reservation.
Note that any copied page table entries will get zapped when the VMA will
get removed later, after copy_page_range() succeeded; as VM_PAT is not set
then, we won't try cleaning VM_PAT up once more and untrack_pfn() will be
happy. Note that leaving these page tables in place without a reservation
is not a problem, as we are aborting fork(); this process will never run.
A reproducer can trigger this usually at the first try:
https://gitlab.com/davidhildenbrand/scratchspace/-/raw/main/reproducers/pat_fork.c
WARNING: CPU: 26 PID: 11650 at arch/x86/mm/pat/memtype.c:983 get_pat_info+0xf6/0x110
Modules linked in: ...
CPU: 26 UID: 0 PID: 11650 Comm: repro3 Not tainted 6.12.0-rc5+ #92
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-2.fc40 04/01/2014
RIP: 0010:get_pat_info+0xf6/0x110
...
Call Trace:
<TASK>
...
untrack_pfn+0x52/0x110
unmap_single_vma+0xa6/0xe0
unmap_vmas+0x105/0x1f0
exit_mmap+0xf6/0x460
__mmput+0x4b/0x120
copy_process+0x1bf6/0x2aa0
kernel_clone+0xab/0x440
__do_sys_clone+0x66/0x90
do_syscall_64+0x95/0x180
Likely this case was missed in:
d155df53f310 ("x86/mm/pat: clear VM_PAT if copy_p4d_range failed")
... and instead of undoing the reservation we simply cleared the VM_PAT flag.
Keep the documentation of these functions in include/linux/pgtable.h,
one place is more than sufficient -- we should clean that up for the other
functions like track_pfn_remap/untrack_pfn separately.
Fixes: d155df53f310 ("x86/mm/pat: clear VM_PAT if copy_p4d_range failed")
Fixes: 2ab640379a0a ("x86: PAT: hooks in generic vm code to help archs to track pfnmap regions - v3")
Reported-by: xingwei lee <xrivendell7@gmail.com>
Reported-by: yuxin wang <wang1315768607@163.com>
Reported-by: Marius Fleischer <fleischermarius@gmail.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-mm@kvack.org
Link: https://lore.kernel.org/r/20250321112323.153741-1-david@redhat.com
Closes: https://lore.kernel.org/lkml/CABOYnLx_dnqzpCW99G81DmOr+2UzdmZMk=T3uxwNxwz+R1RAwg@mail.gmail.com/
Closes: https://lore.kernel.org/lkml/CAJg=8jwijTP5fre8woS4JVJQ8iUA6v+iNcsOgtj9Zfpc3obDOQ@mail.gmail.com/
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen updates from Juergen Gross:
- cleanup: remove an used function
- add support for a XenServer specific virtual PCI device
- fix the handling of a sparse Xen hypervisor symbol table
- avoid warnings when building the kernel with gcc 15
- fix use of devices behind a VMD bridge when running as a Xen PV dom0
* tag 'for-linus-6.15-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
PCI/MSI: Convert pci_msi_ignore_mask to per MSI domain flag
PCI: vmd: Disable MSI remapping bypass under Xen
xen/pci: Do not register devices with segments >= 0x10000
xen/pciback: Remove unused pcistub_get_pci_dev
xenfs/xensyms: respect hypervisor's "next" indication
xen/mcelog: Add __nonstring annotations for unterminated strings
xen: Add support for XenServer 6.1 platform device
|
|
Pull kvm updates from Paolo Bonzini:
"ARM:
- Nested virtualization support for VGICv3, giving the nested
hypervisor control of the VGIC hardware when running an L2 VM
- Removal of 'late' nested virtualization feature register masking,
making the supported feature set directly visible to userspace
- Support for emulating FEAT_PMUv3 on Apple silicon, taking advantage
of an IMPLEMENTATION DEFINED trap that covers all PMUv3 registers
- Paravirtual interface for discovering the set of CPU
implementations where a VM may run, addressing a longstanding issue
of guest CPU errata awareness in big-little systems and
cross-implementation VM migration
- Userspace control of the registers responsible for identifying a
particular CPU implementation (MIDR_EL1, REVIDR_EL1, AIDR_EL1),
allowing VMs to be migrated cross-implementation
- pKVM updates, including support for tracking stage-2 page table
allocations in the protected hypervisor in the 'SecPageTable' stat
- Fixes to vPMU, ensuring that userspace updates to the vPMU after
KVM_RUN are reflected into the backing perf events
LoongArch:
- Remove unnecessary header include path
- Assume constant PGD during VM context switch
- Add perf events support for guest VM
RISC-V:
- Disable the kernel perf counter during configure
- KVM selftests improvements for PMU
- Fix warning at the time of KVM module removal
x86:
- Add support for aging of SPTEs without holding mmu_lock.
Not taking mmu_lock allows multiple aging actions to run in
parallel, and more importantly avoids stalling vCPUs. This includes
an implementation of per-rmap-entry locking; aging the gfn is done
with only a per-rmap single-bin spinlock taken, whereas locking an
rmap for write requires taking both the per-rmap spinlock and the
mmu_lock.
Note that this decreases slightly the accuracy of accessed-page
information, because changes to the SPTE outside aging might not
use atomic operations even if they could race against a clear of
the Accessed bit.
This is deliberate because KVM and mm/ tolerate false
positives/negatives for accessed information, and testing has shown
that reducing the latency of aging is far more beneficial to
overall system performance than providing "perfect" young/old
information.
- Defer runtime CPUID updates until KVM emulates a CPUID instruction,
to coalesce updates when multiple pieces of vCPU state are
changing, e.g. as part of a nested transition
- Fix a variety of nested emulation bugs, and add VMX support for
synthesizing nested VM-Exit on interception (instead of injecting
#UD into L2)
- Drop "support" for async page faults for protected guests that do
not set SEND_ALWAYS (i.e. that only want async page faults at CPL3)
- Bring a bit of sanity to x86's VM teardown code, which has
accumulated a lot of cruft over the years. Particularly, destroy
vCPUs before the MMU, despite the latter being a VM-wide operation
- Add common secure TSC infrastructure for use within SNP and in the
future TDX
- Block KVM_CAP_SYNC_REGS if guest state is protected. It does not
make sense to use the capability if the relevant registers are not
available for reading or writing
- Don't take kvm->lock when iterating over vCPUs in the suspend
notifier to fix a largely theoretical deadlock
- Use the vCPU's actual Xen PV clock information when starting the
Xen timer, as the cached state in arch.hv_clock can be stale/bogus
- Fix a bug where KVM could bleed PVCLOCK_GUEST_STOPPED across
different PV clocks; restrict PVCLOCK_GUEST_STOPPED to kvmclock, as
KVM's suspend notifier only accounts for kvmclock, and there's no
evidence that the flag is actually supported by Xen guests
- Clean up the per-vCPU "cache" of its reference pvclock, and instead
only track the vCPU's TSC scaling (multipler+shift) metadata (which
is moderately expensive to compute, and rarely changes for modern
setups)
- Don't write to the Xen hypercall page on MSR writes that are
initiated by the host (userspace or KVM) to fix a class of bugs
where KVM can write to guest memory at unexpected times, e.g.
during vCPU creation if userspace has set the Xen hypercall MSR
index to collide with an MSR that KVM emulates
- Restrict the Xen hypercall MSR index to the unofficial synthetic
range to reduce the set of possible collisions with MSRs that are
emulated by KVM (collisions can still happen as KVM emulates
Hyper-V MSRs, which also reside in the synthetic range)
- Clean up and optimize KVM's handling of Xen MSR writes and
xen_hvm_config
- Update Xen TSC leaves during CPUID emulation instead of modifying
the CPUID entries when updating PV clocks; there is no guarantee PV
clocks will be updated between TSC frequency changes and CPUID
emulation, and guest reads of the TSC leaves should be rare, i.e.
are not a hot path
x86 (Intel):
- Fix a bug where KVM unnecessarily reads XFD_ERR from hardware and
thus modifies the vCPU's XFD_ERR on a #NM due to CR0.TS=1
- Pass XFD_ERR as the payload when injecting #NM, as a preparatory
step for upcoming FRED virtualization support
- Decouple the EPT entry RWX protection bit macros from the EPT
Violation bits, both as a general cleanup and in anticipation of
adding support for emulating Mode-Based Execution Control (MBEC)
- Reject KVM_RUN if userspace manages to gain control and stuff
invalid guest state while KVM is in the middle of emulating nested
VM-Enter
- Add a macro to handle KVM's sanity checks on entry/exit VMCS
control pairs in anticipation of adding sanity checks for secondary
exit controls (the primary field is out of bits)
x86 (AMD):
- Ensure the PSP driver is initialized when both the PSP and KVM
modules are built-in (the initcall framework doesn't handle
dependencies)
- Use long-term pins when registering encrypted memory regions, so
that the pages are migrated out of MIGRATE_CMA/ZONE_MOVABLE and
don't lead to excessive fragmentation
- Add macros and helpers for setting GHCB return/error codes
- Add support for Idle HLT interception, which elides interception if
the vCPU has a pending, unmasked virtual IRQ when HLT is executed
- Fix a bug in INVPCID emulation where KVM fails to check for a
non-canonical address
- Don't attempt VMRUN for SEV-ES+ guests if the vCPU's VMSA is
invalid, e.g. because the vCPU was "destroyed" via SNP's AP
Creation hypercall
- Reject SNP AP Creation if the requested SEV features for the vCPU
don't match the VM's configured set of features
Selftests:
- Fix again the Intel PMU counters test; add a data load and do
CLFLUSH{OPT} on the data instead of executing code. The theory is
that modern Intel CPUs have learned new code prefetching tricks
that bypass the PMU counters
- Fix a flaw in the Intel PMU counters test where it asserts that an
event is counting correctly without actually knowing what the event
counts on the underlying hardware
- Fix a variety of flaws, bugs, and false failures/passes
dirty_log_test, and improve its coverage by collecting all dirty
entries on each iteration
- Fix a few minor bugs related to handling of stats FDs
- Add infrastructure to make vCPU and VM stats FDs available to tests
by default (open the FDs during VM/vCPU creation)
- Relax an assertion on the number of HLT exits in the xAPIC IPI test
when running on a CPU that supports AMD's Idle HLT (which elides
interception of HLT if a virtual IRQ is pending and unmasked)"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (216 commits)
RISC-V: KVM: Optimize comments in kvm_riscv_vcpu_isa_disable_allowed
RISC-V: KVM: Teardown riscv specific bits after kvm_exit
LoongArch: KVM: Register perf callbacks for guest
LoongArch: KVM: Implement arch-specific functions for guest perf
LoongArch: KVM: Add stub for kvm_arch_vcpu_preempted_in_kernel()
LoongArch: KVM: Remove PGD saving during VM context switch
LoongArch: KVM: Remove unnecessary header include path
KVM: arm64: Tear down vGIC on failed vCPU creation
KVM: arm64: PMU: Reload when resetting
KVM: arm64: PMU: Reload when user modifies registers
KVM: arm64: PMU: Fix SET_ONE_REG for vPMC regs
KVM: arm64: PMU: Assume PMU presence in pmu-emul.c
KVM: arm64: PMU: Set raw values from user to PM{C,I}NTEN{SET,CLR}, PMOVS{SET,CLR}
KVM: arm64: Create each pKVM hyp vcpu after its corresponding host vcpu
KVM: arm64: Factor out pKVM hyp vcpu creation to separate function
KVM: arm64: Initialize HCRX_EL2 traps in pKVM
KVM: arm64: Factor out setting HCRX_EL2 traps into separate function
KVM: x86: block KVM_CAP_SYNC_REGS if guest state is protected
KVM: x86: Add infrastructure for secure TSC
KVM: x86: Push down setting vcpu.arch.user_set_tsc
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
Luiz Augusto von Dentz says:
====================
bluetooth-next pull request for net-next:
core:
- Add support for skb TX SND/COMPLETION timestamping
- hci_core: Enable buffer flow control for SCO/eSCO
- coredump: Log devcd dumps into the monitor
drivers:
- btusb: Add 2 HWIDs for MT7922
- btusb: Fix regression in the initialization of fake Bluetooth controllers
- btusb: Add 14 USB device IDs for Qualcomm WCN785x
- btintel: Add support for Intel Scorpius Peak
- btintel: Add support to configure TX power
- btintel: Add DSBR support for ScP
- btintel_pcie: Add device id of Whale Peak
- btintel_pcie: Setup buffers for firmware traces
- btintel_pcie: Read hardware exception data
- btintel_pcie: Add support for device coredump
- btintel_pcie: Trigger device coredump on hardware exception
- btnxpuart: Support for controller wakeup gpio config
- btnxpuart: Add support to set BD address
- btnxpuart: Add correct bootloader error codes
- btnxpuart: Handle bootloader error during cmd5 and cmd7
- btnxpuart: Fix kernel panic during FW release
- qca: add WCN3950 support
- hci_qca: use the power sequencer for wcn6750
- btmtksdio: Prevent enabling interrupts after IRQ handler removal
* tag 'for-net-next-2025-03-25' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next: (53 commits)
Bluetooth: MGMT: Add LL Privacy Setting
Bluetooth: hci_event: Fix handling of HCI_EV_LE_DIRECT_ADV_REPORT
Bluetooth: btnxpuart: Fix kernel panic during FW release
Bluetooth: btnxpuart: Handle bootloader error during cmd5 and cmd7
Bluetooth: btnxpuart: Add correct bootloader error codes
t blameBluetooth: btintel: Fix leading white space
Bluetooth: btintel: Add support to configure TX power
Bluetooth: btmtksdio: Prevent enabling interrupts after IRQ handler removal
Bluetooth: btmtk: Remove the resetting step before downloading the fw
Bluetooth: SCO: add TX timestamping
Bluetooth: L2CAP: add TX timestamping
Bluetooth: ISO: add TX timestamping
Bluetooth: add support for skb TX SND/COMPLETION timestamping
net-timestamp: COMPLETION timestamp on packet tx completion
HCI: coredump: Log devcd dumps into the monitor
Bluetooth: HCI: Add definition of hci_rp_remote_name_req_cancel
Bluetooth: hci_vhci: Mark Sync Flow Control as supported
Bluetooth: hci_core: Enable buffer flow control for SCO/eSCO
Bluetooth: btintel_pci: Fix build warning
Bluetooth: btintel_pcie: Trigger device coredump on hardware exception
...
====================
Link: https://patch.msgid.link/20250325192925.2497890-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC updates from Borislav Petkov:
- Add infrastructure support to EDAC in order to be able to register
memory scrubbing RAS functionality with the kernel and expose sysfs
nodes to control such scrubbing functionality.
The main use case is CXL devices which provide different scrubbers
for their built-in memories so that tools like rasdaemon can
configure and control memory scrubbing and other, more advanced RAS
functionality (Shiju Jose and Jonathan Cameron)
- Add support to ie31200_edac for client SoCs like Raptor Lake-S which
have multiple memory controllers and out-of-band ECC capability
(Qiuxu Zhuo)
- The usual round of cleanups, simplifications and fixlets
* tag 'edac_updates_for_v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras: (25 commits)
MAINTAINERS: Add a secondary maintainer for bluefield_edac
EDAC/ie31200: Switch Raptor Lake-S to interrupt mode
EDAC/ie31200: Add Intel Raptor Lake-S SoCs support
EDAC/ie31200: Break up ie31200_probe1()
EDAC/ie31200: Fold the two channel loops into one loop
EDAC/ie31200: Make struct dimm_data contain decoded information
EDAC/ie31200: Make the memory controller resources configurable
EDAC/ie31200: Simplify the pci_device_id table
EDAC/ie31200: Fix the 3rd parameter name of *populate_dimm_info()
EDAC/ie31200: Fix the error path order of ie31200_init()
EDAC/ie31200: Fix the DIMM size mask for several SoCs
EDAC/ie31200: Fix the size of EDAC_MC_LAYER_CHIP_SELECT layer
EDAC/device: Fix dev_set_name() format string
EDAC/pnd2: Make read-only const array intlv static
EDAC/igen6: Constify struct res_config
EDAC/amd64: Simplify return statement in dct_ecc_enabled()
EDAC: Update memory repair control interface for memory sparing feature
EDAC: Add a memory repair control feature
EDAC: Use string choice helper functions
EDAC: Add a Error Check Scrub control feature
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 resource control updates from Borislav Petkov:
- First part of the MPAM work: split the architectural part of resctrl
from the filesystem part so that ARM's MPAM varian of resource
control can be added later while sharing the user interface with x86
(James Morse)
* tag 'x86_cache_for_v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (30 commits)
x86/resctrl: Move get_{mon,ctrl}_domain_from_cpu() to live with their callers
x86/resctrl: Move get_config_index() to a header
x86/resctrl: Handle throttle_mode for SMBA resources
x86/resctrl: Move RFTYPE flags to be managed by resctrl
x86/resctrl: Make resctrl_arch_pseudo_lock_fn() take a plr
x86/resctrl: Make prefetch_disable_bits belong to the arch code
x86/resctrl: Allow an architecture to disable pseudo lock
x86/resctrl: Add resctrl_arch_ prefix to pseudo lock functions
x86/resctrl: Move mbm_cfg_mask to struct rdt_resource
x86/resctrl: Move mba_mbps_default_event init to filesystem code
x86/resctrl: Change mon_event_config_{read,write}() to be arch helpers
x86/resctrl: Add resctrl_arch_is_evt_configurable() to abstract BMEC
x86/resctrl: Move the is_mbm_*_enabled() helpers to asm/resctrl.h
x86/resctrl: Rewrite and move the for_each_*_rdt_resource() walkers
x86/resctrl: Move monitor init work to a resctrl init call
x86/resctrl: Move monitor exit work to a resctrl exit call
x86/resctrl: Add an arch helper to reset one resource
x86/resctrl: Move resctrl types to a separate header
x86/resctrl: Move rdt_find_domain() to be visible to arch and fs code
x86/resctrl: Expose resctrl fs's init function to the rest of the kernel
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
"Nothing major this time around.
Apart from the usual perf/PMU updates, some page table cleanups, the
notable features are average CPU frequency based on the AMUv1
counters, CONFIG_HOTPLUG_SMT and MOPS instructions (memcpy/memset) in
the uaccess routines.
Perf and PMUs:
- Support for the 'Rainier' CPU PMU from Arm
- Preparatory driver changes and cleanups that pave the way for BRBE
support
- Support for partial virtualisation of the Apple-M1 PMU
- Support for the second event filter in Arm CSPMU designs
- Minor fixes and cleanups (CMN and DWC PMUs)
- Enable EL2 requirements for FEAT_PMUv3p9
Power, CPU topology:
- Support for AMUv1-based average CPU frequency
- Run-time SMT control wired up for arm64 (CONFIG_HOTPLUG_SMT). It
adds a generic topology_is_primary_thread() function overridden by
x86 and powerpc
New(ish) features:
- MOPS (memcpy/memset) support for the uaccess routines
Security/confidential compute:
- Fix the DMA address for devices used in Realms with Arm CCA. The
CCA architecture uses the address bit to differentiate between
shared and private addresses
- Spectre-BHB: assume CPUs Linux doesn't know about vulnerable by
default
Memory management clean-ups:
- Drop the P*D_TABLE_BIT definition in preparation for 128-bit PTEs
- Some minor page table accessor clean-ups
- PIE/POE (permission indirection/overlay) helpers clean-up
Kselftests:
- MTE: skip hugetlb tests if MTE is not supported on such mappings
and user correct naming for sync/async tag checking modes
Miscellaneous:
- Add a PKEY_UNRESTRICTED definition as 0 to uapi (toolchain people
request)
- Sysreg updates for new register fields
- CPU type info for some Qualcomm Kryo cores"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (72 commits)
arm64: mm: Don't use %pK through printk
perf/arm_cspmu: Fix missing io.h include
arm64: errata: Add newer ARM cores to the spectre_bhb_loop_affected() lists
arm64: cputype: Add MIDR_CORTEX_A76AE
arm64: errata: Add KRYO 2XX/3XX/4XX silver cores to Spectre BHB safe list
arm64: errata: Assume that unknown CPUs _are_ vulnerable to Spectre BHB
arm64: errata: Add QCOM_KRYO_4XX_GOLD to the spectre_bhb_k24_list
arm64/sysreg: Enforce whole word match for open/close tokens
arm64/sysreg: Fix unbalanced closing block
arm64: Kconfig: Enable HOTPLUG_SMT
arm64: topology: Support SMT control on ACPI based system
arch_topology: Support SMT control for OF based system
cpu/SMT: Provide a default topology_is_primary_thread()
arm64/mm: Define PTDESC_ORDER
perf/arm_cspmu: Add PMEVFILT2R support
perf/arm_cspmu: Generalise event filtering
perf/arm_cspmu: Move register definitons to header
arm64/kernel: Always use level 2 or higher for early mappings
arm64/mm: Drop PXD_TABLE_BIT
arm64/mm: Check pmd_table() in pmd_trans_huge()
...
|
|
The struct thermal_zone_device is already declared on line 32, so the
duplicate declaration has been removed.
Fixes: b1ae92dcfa8e ("thermal: core: Make struct thermal_zone_device definition internal")
Signed-off-by: xueqin Luo <luoxueqin@kylinos.cn>
Link: https://lore.kernel.org/r/20250206081436.51785-1-luoxueqin@kylinos.cn
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
* for-next/smt-control:
: Support SMT control on arm64
arm64: Kconfig: Enable HOTPLUG_SMT
arm64: topology: Support SMT control on ACPI based system
arch_topology: Support SMT control for OF based system
cpu/SMT: Provide a default topology_is_primary_thread()
|
|
'for-next/sysreg', 'for-next/misc', 'for-next/pgtable-cleanups', 'for-next/kselftest', 'for-next/uaccess-mops', 'for-next/pie-poe-cleanup', 'for-next/cputype-kryo', 'for-next/cca-dma-address', 'for-next/drop-pxd_table_bit' and 'for-next/spectre-bhb-assume-vulnerable', remote-tracking branch 'arm64/for-next/perf' into for-next/core
* arm64/for-next/perf:
perf/arm_cspmu: Fix missing io.h include
perf/arm_cspmu: Add PMEVFILT2R support
perf/arm_cspmu: Generalise event filtering
perf/arm_cspmu: Move register definitons to header
drivers/perf: apple_m1: Support host/guest event filtering
drivers/perf: apple_m1: Refactor event select/filter configuration
perf/dwc_pcie: fix duplicate pci_dev devices
perf/dwc_pcie: fix some unreleased resources
perf/arm-cmn: Minor event type housekeeping
perf: arm_pmu: Move PMUv3-specific data
perf: apple_m1: Don't disable counter in m1_pmu_enable_event()
perf: arm_v7_pmu: Don't disable counter in (armv7|krait_|scorpion_)pmu_enable_event()
perf: arm_v7_pmu: Drop obvious comments for enabling/disabling counters and interrupts
perf: arm_pmuv3: Don't disable counter in armv8pmu_enable_event()
perf: arm_pmu: Don't disable counter in armpmu_add()
perf: arm_pmuv3: Call kvm_vcpu_pmu_resync_el0() before enabling counters
perf: arm_pmuv3: Add support for ARM Rainier PMU
* for-next/amuv1-avg-freq:
: Add support for AArch64 AMUv1-based average freq
arm64: Utilize for_each_cpu_wrap for reference lookup
arm64: Update AMU-based freq scale factor on entering idle
arm64: Provide an AMU-based version of arch_freq_get_on_cpu
cpufreq: Introduce an optional cpuinfo_avg_freq sysfs entry
cpufreq: Allow arch_freq_get_on_cpu to return an error
arch_topology: init capacity_freq_ref to 0
* for-next/pkey_unrestricted:
: mm/pkey: Add PKEY_UNRESTRICTED macro
selftest/powerpc/mm/pkey: fix build-break introduced by commit 00894c3fc917
selftests/powerpc: Use PKEY_UNRESTRICTED macro
selftests/mm: Use PKEY_UNRESTRICTED macro
mm/pkey: Add PKEY_UNRESTRICTED macro
* for-next/sysreg:
: arm64 sysreg updates
arm64/sysreg: Enforce whole word match for open/close tokens
arm64/sysreg: Fix unbalanced closing block
arm64/sysreg: Add register fields for HFGWTR2_EL2
arm64/sysreg: Add register fields for HFGRTR2_EL2
arm64/sysreg: Add register fields for HFGITR2_EL2
arm64/sysreg: Add register fields for HDFGWTR2_EL2
arm64/sysreg: Add register fields for HDFGRTR2_EL2
arm64/sysreg: Update register fields for ID_AA64MMFR0_EL1
* for-next/misc:
: Miscellaneous arm64 patches
arm64: mm: Don't use %pK through printk
arm64/fpsimd: Remove unused declaration fpsimd_kvm_prepare()
* for-next/pgtable-cleanups:
: arm64 pgtable accessors cleanup
arm64/mm: Define PTDESC_ORDER
arm64/kernel: Always use level 2 or higher for early mappings
arm64/hugetlb: Consistently use pud_sect_supported()
arm64/mm: Convert __pte_to_phys() and __phys_to_pte_val() as functions
* for-next/kselftest:
: arm64 kselftest updates
kselftest/arm64: mte: Skip the hugetlb tests if MTE not supported on such mappings
kselftest/arm64: mte: Use the correct naming for tag check modes in check_hugetlb_options.c
* for-next/uaccess-mops:
: Implement the uaccess memory copy/set using MOPS instructions
arm64: lib: Use MOPS for usercopy routines
arm64: mm: Handle PAN faults on uaccess CPY* instructions
arm64: extable: Add fixup handling for uaccess CPY* instructions
* for-next/pie-poe-cleanup:
: PIE/POE helpers cleanup
arm64/sysreg: Move POR_EL0_INIT to asm/por.h
arm64/sysreg: Rename POE_RXW to POE_RWX
arm64/sysreg: Improve PIR/POR helpers
* for-next/cputype-kryo:
: Add cputype info for some Qualcomm Kryo cores
arm64: cputype: Add comments about Qualcomm Kryo 5XX and 6XX cores
arm64: cputype: Add QCOM_CPU_PART_KRYO_3XX_GOLD
* for-next/cca-dma-address:
: Fix DMA address for devices used in realms with Arm CCA
arm64: realm: Use aliased addresses for device DMA to shared buffers
dma: Introduce generic dma_addr_*crypted helpers
dma: Fix encryption bit clearing for dma_to_phys
* for-next/drop-pxd_table_bit:
: Drop the arm64 PXD_TABLE_BIT (clean-up in preparation for 128-bit PTEs)
arm64/mm: Drop PXD_TABLE_BIT
arm64/mm: Check pmd_table() in pmd_trans_huge()
arm64/mm: Check PUD_TYPE_TABLE in pud_bad()
arm64/mm: Check PXD_TYPE_TABLE in [p4d|pgd]_bad()
arm64/mm: Clear PXX_TYPE_MASK and set PXD_TYPE_SECT in [pmd|pud]_mkhuge()
arm64/mm: Clear PXX_TYPE_MASK in mk_[pmd|pud]_sect_prot()
arm64/ptdump: Test PMD_TYPE_MASK for block mapping
KVM: arm64: ptdump: Test PMD_TYPE_MASK for block mapping
* for-next/spectre-bhb-assume-vulnerable:
: Rework Spectre BHB mitigations to not assume "safe"
arm64: errata: Add newer ARM cores to the spectre_bhb_loop_affected() lists
arm64: cputype: Add MIDR_CORTEX_A76AE
arm64: errata: Add KRYO 2XX/3XX/4XX silver cores to Spectre BHB safe list
arm64: errata: Assume that unknown CPUs _are_ vulnerable to Spectre BHB
arm64: errata: Add QCOM_KRYO_4XX_GOLD to the spectre_bhb_k24_list
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull VDSO infrastructure updates from Thomas Gleixner:
- Consolidate the VDSO storage
The VDSO data storage and data layout has been largely architecture
specific for historical reasons. That increases the maintenance
effort and causes inconsistencies over and over.
There is no real technical reason for architecture specific layouts
and implementations. The architecture specific details can easily be
integrated into a generic layout, which also reduces the amount of
duplicated code for managing the mappings.
Convert all architectures over to a unified layout and common mapping
infrastructure. This splits the VDSO data layout into subsystem
specific blocks, timekeeping, random and architecture parts, which
provides a better structure and allows to improve and update the
functionalities without conflict and interaction.
- Rework the timekeeping data storage
The current implementation is designed for exposing system
timekeeping accessors, which was good enough at the time when it was
designed.
PTP and Time Sensitive Networking (TSN) change that as there are
requirements to expose independent PTP clocks, which are not related
to system timekeeping.
Replace the monolithic data storage by a structured layout, which
allows to add support for independent PTP clocks on top while reusing
both the data structures and the time accessor implementations.
* tag 'timers-vdso-2025-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (55 commits)
sparc/vdso: Always reject undefined references during linking
x86/vdso: Always reject undefined references during linking
vdso: Rework struct vdso_time_data and introduce struct vdso_clock
vdso: Move architecture related data before basetime data
powerpc/vdso: Prepare introduction of struct vdso_clock
arm64/vdso: Prepare introduction of struct vdso_clock
x86/vdso: Prepare introduction of struct vdso_clock
time/namespace: Prepare introduction of struct vdso_clock
vdso/namespace: Rename timens_setup_vdso_data() to reflect new vdso_clock struct
vdso/vsyscall: Prepare introduction of struct vdso_clock
vdso/gettimeofday: Prepare helper functions for introduction of struct vdso_clock
vdso/gettimeofday: Prepare do_coarse_timens() for introduction of struct vdso_clock
vdso/gettimeofday: Prepare do_coarse() for introduction of struct vdso_clock
vdso/gettimeofday: Prepare do_hres_timens() for introduction of struct vdso_clock
vdso/gettimeofday: Prepare do_hres() for introduction of struct vdso_clock
vdso/gettimeofday: Prepare introduction of struct vdso_clock
vdso/helpers: Prepare introduction of struct vdso_clock
vdso/datapage: Define vdso_clock to prepare for multiple PTP clocks
vdso: Make vdso_time_data cacheline aligned
arm64: Make asm/cache.h compatible with vDSO
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer cleanups from Thomas Gleixner:
"A treewide hrtimer timer cleanup
hrtimers are initialized with hrtimer_init() and a subsequent store to
the callback pointer. This turned out to be suboptimal for the
upcoming Rust integration and is obviously a silly implementation to
begin with.
This cleanup replaces the hrtimer_init(T); T->function = cb; sequence
with hrtimer_setup(T, cb);
The conversion was done with Coccinelle and a few manual fixups.
Once the conversion has completely landed in mainline, hrtimer_init()
will be removed and the hrtimer::function becomes a private member"
* tag 'timers-cleanups-2025-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (100 commits)
wifi: rt2x00: Switch to use hrtimer_update_function()
io_uring: Use helper function hrtimer_update_function()
serial: xilinx_uartps: Use helper function hrtimer_update_function()
ASoC: fsl: imx-pcm-fiq: Switch to use hrtimer_setup()
RDMA: Switch to use hrtimer_setup()
virtio: mem: Switch to use hrtimer_setup()
drm/vmwgfx: Switch to use hrtimer_setup()
drm/xe/oa: Switch to use hrtimer_setup()
drm/vkms: Switch to use hrtimer_setup()
drm/msm: Switch to use hrtimer_setup()
drm/i915/request: Switch to use hrtimer_setup()
drm/i915/uncore: Switch to use hrtimer_setup()
drm/i915/pmu: Switch to use hrtimer_setup()
drm/i915/perf: Switch to use hrtimer_setup()
drm/i915/gvt: Switch to use hrtimer_setup()
drm/i915/huc: Switch to use hrtimer_setup()
drm/amdgpu: Switch to use hrtimer_setup()
stm class: heartbeat: Switch to use hrtimer_setup()
i2c: Switch to use hrtimer_setup()
iio: Switch to use hrtimer_setup()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer core updates from Thomas Gleixner:
- Fix a memory ordering issue in posix-timers
Posix-timer lookup is lockless and reevaluates the timer validity
under the timer lock, but the update which validates the timer is not
protected by the timer lock. That allows the store to be reordered
against the initialization stores, so that the lookup side can
observe a partially initialized timer. That's mostly a theoretical
problem, but incorrect nevertheless.
- Fix a long standing inconsistency of the coarse time getters
The coarse time getters read the base time of the current update
cycle without reading the actual hardware clock. NTP frequency
adjustment can set the base time backwards. The fine grained
interfaces compensate this by reading the clock and applying the new
conversion factor, but the coarse grained time getters use the base
time directly. That allows the user to observe time going backwards.
Cure it by always forwarding base time, when NTP changes the
frequency with an immediate step.
- Rework of posix-timer hashing
The posix-timer hash is not scalable and due to the CRIU timer
restore mechanism prone to massive contention on the global hash
bucket lock.
Replace the global hash lock with a fine grained per bucket locking
scheme to address that.
- Rework the proc/$PID/timers interface.
/proc/$PID/timers is provided for CRIU to be able to restore a timer.
The printout happens with sighand lock held and interrupts disabled.
That's not required as this can be done with RCU protection as well.
- Provide a sane mechanism for CRIU to restore a timer ID
CRIU restores timers by creating and deleting them until the kernel
internal per process ID counter reached the requested ID. That's
horribly slow for sparse timer IDs.
Provide a prctl() which allows CRIU to restore a timer with a given
ID. When enabled the ID pointer is used as input pointer to read the
requested ID from user space. When disabled, the normal allocation
scheme (next ID) is active as before. This is backwards compatible
for both kernel and user space.
- Make hrtimer_update_function() less expensive.
The sanity checks are valuable, but expensive for high frequency
usage in io/uring. Make the debug checks conditional and enable them
only when lockdep is enabled.
- Small updates, cleanups and improvements
* tag 'timers-core-2025-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (27 commits)
selftests/timers: Improve skew_consistency by testing with other clockids
timekeeping: Fix possible inconsistencies in _COARSE clockids
posix-timers: Drop redundant memset() invocation
selftests/timers/posix-timers: Add a test for exact allocation mode
posix-timers: Provide a mechanism to allocate a given timer ID
posix-timers: Dont iterate /proc/$PID/timers with sighand:: Siglock held
posix-timers: Make per process list RCU safe
posix-timers: Avoid false cacheline sharing
posix-timers: Switch to jhash32()
posix-timers: Improve hash table performance
posix-timers: Make signal_struct:: Next_posix_timer_id an atomic_t
posix-timers: Make lock_timer() use guard()
posix-timers: Rework timer removal
posix-timers: Simplify lock/unlock_timer()
posix-timers: Use guards in a few places
posix-timers: Remove SLAB_PANIC from kmem cache
posix-timers: Remove a few paranoid warnings
posix-timers: Cleanup includes
posix-timers: Add cond_resched() to posix_timer_add() search loop
posix-timers: Initialise timer before adding it to the hash table
...
|
|
netdev netlink is the only reader of netdev_{,rx_}queue->napi,
and it already holds netdev->lock. Switch protection of
the writes to netdev->lock to "ops protected".
The expectation will be now that accessing queue->napi
will require netdev->lock for "ops locked" drivers, and
rtnl_lock for all other drivers.
Current "ops locked" drivers don't require any changes.
gve and netdevsim use _locked() helpers right next to
netif_queue_set_napi() so they must be holding the instance
lock. iavf doesn't call it. bnxt is a bit messy but all paths
seem locked.
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250324224537.248800-7-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Drivers which opt into instance lock protection of ops should
only call set_real_num_*_queues() under the instance lock.
This means that queue counts are double protected (writes
are under both rtnl_lock and instance lock, readers under
either).
Some readers may still be under the rtnl_lock, however, so for
now we need double protection of writers.
OTOH queue API paths are only under the protection of the instance
lock, so we need to validate that the instance is actually locking
ops, otherwise the input checks we do against queue count are racy.
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250324224537.248800-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Try to define some terminology for which fields are protected
by which lock and how. Some fields are protected by both rtnl_lock
and instance lock which is hard to talk about without having
a "key phrase" to refer to a particular protection scheme.
"ops protected" fields are defined later in the series, one by one.
Add ASSERT_RTNL() to netdev_ops_assert_locked() for drivers
not other instance protection of ops. Hopefully it's not too
confusion that netdev_lock_ops() does not match the lock which
netdev_ops_assert_locked() will assert, exactly. The noun "ops"
is in a different place in the name, so I think it's acceptable...
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250324224537.248800-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since commit a953be53ce40 ("net-sysfs: add support for device-specific
rx queue sysfs attributes"), so for at least a decade now it is safe
to call net_rx_queue_update_kobjects() when SYSFS=n. That function
does its own ifdef-inery and will return 0. Remove the unnecessary
stub for netif_set_real_num_rx_queues().
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250324224537.248800-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq driver updates from Thomas Gleixner:
- Support for hard indices on RISC-V. The hart index identifies a hart
(core) within a specific interrupt domain in RISC-V's Priviledged
Architecture.
- Rework of the RISC-V MSI driver
This moves the driver over to the generic MSI library and solves the
affinity problem of unmaskable PCI/MSI controllers. Unmaskable
PCI/MSI controllers are prone to lose interrupts when the MSI message
is updated to change the affinity because the message write consists
of three 32-bit subsequent writes, which update address and data. As
these writes are non-atomic versus the device raising an interrupt,
the device can observe a half written update and issue an interrupt
on the wrong vector. This is mitiated by a carefully orchestrated
step by step update and the observation of an eventually pending
interrupt on the CPU which issues the update. The algorithm follows
the well established method of the X86 MSI driver.
- A new driver for the RISC-V Sophgo SG2042 MSI controller
- Overhaul of the Renesas RZQ2L driver
Simplification of the probe function by using devm_*() mechanisms,
which avoid the endless list of error prone gotos in the failure
paths.
- Expand the Renesas RZV2H driver to support RZ/G3E SoCs
- A workaround for Rockchip 3568002 erratum in the GIC-V3 driver to
ensure that the addressing is limited to the lower 32-bit of the
physical address space.
- Add support for the Allwinner AS23 NMI controller
- Expand the IMX irqsteer driver to handle up to 960 input interrupts
- The usual small updates, cleanups and device tree changes
* tag 'irq-drivers-2025-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (40 commits)
irqchip/imx-irqsteer: Support up to 960 input interrupts
irqchip/sunxi-nmi: Support Allwinner A523 NMI controller
dt-bindings: irq: sun7i-nmi: Document the Allwinner A523 NMI controller
irqchip/davinci-cp-intc: Remove public header
irqchip/renesas-rzv2h: Add RZ/G3E support
irqchip/renesas-rzv2h: Update macros ICU_TSSR_TSSEL_{MASK,PREP}
irqchip/renesas-rzv2h: Update TSSR_TIEN macro
irqchip/renesas-rzv2h: Add field_width to struct rzv2h_hw_info
irqchip/renesas-rzv2h: Add max_tssel to struct rzv2h_hw_info
irqchip/renesas-rzv2h: Add struct rzv2h_hw_info with t_offs variable
irqchip/renesas-rzv2h: Use devm_pm_runtime_enable()
irqchip/renesas-rzv2h: Use devm_reset_control_get_exclusive_deasserted()
irqchip/renesas-rzv2h: Simplify rzv2h_icu_init()
irqchip/renesas-rzv2h: Drop irqchip from struct rzv2h_icu_priv
irqchip/renesas-rzv2h: Fix wrong variable usage in rzv2h_tint_set_type()
dt-bindings: interrupt-controller: renesas,rzv2h-icu: Document RZ/G3E SoC
riscv: sophgo: dts: Add msi controller for SG2042
irqchip: Add the Sophgo SG2042 MSI interrupt controller
dt-bindings: interrupt-controller: Add Sophgo SG2042 MSI
arm64: dts: rockchip: rk356x: Move PCIe MSI to use GIC ITS instead of MBI
...
|
|
Add SOF_TIMESTAMPING_TX_COMPLETION, for requesting a software timestamp
when hardware reports a packet completed.
Completion tstamp is useful for Bluetooth, as hardware timestamps do not
exist in the HCI specification except for ISO packets, and the hardware
has a queue where packets may wait. In this case the software SND
timestamp only reflects the kernel-side part of the total latency
(usually small) and queue length (usually 0 unless HW buffers
congested), whereas the completion report time is more informative of
the true latency.
It may also be useful in other cases where HW TX timestamps cannot be
obtained and user wants to estimate an upper bound to when the TX
probably happened.
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull MSI irq updates from Thomas Gleixner:
- Switch the MSI descriptor locking to guards
- Replace the broken PCI/TPH implementation, which lacks any form of
serialization against concurrent modifications with a properly
serialized mechanism in the PCI/MSI core code
- Replace the MSI descriptor abuse in the SCSI/UFS Qualcom driver with
dedicated driver internal storage
* tag 'irq-msi-2025-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq/msi: Rename msi_[un]lock_descs()
scsi: ufs: qcom: Remove the MSI descriptor abuse
PCI/TPH: Replace the broken MSI-X control word update
PCI/MSI: Provide a sane mechanism for TPH
PCI: hv: Switch MSI descriptor locking to guard()
PCI/MSI: Switch to MSI descriptor locking to guard()
NTB/msi: Switch MSI descriptor locking to lock guard()
soc: ti: ti_sci_inta_msi: Switch MSI descriptor locking to guard()
genirq/msi: Use lock guards for MSI descriptor locking
cleanup: Provide retain_ptr()
genirq/msi: Make a few functions static
|
|
Revert "udp_tunnel: use static call for GRO hooks when possible"
This reverts commit 311b36574ceaccfa3f91b74054a09cd4bb877702.
Revert "udp_tunnel: create a fastpath GRO lookup."
This reverts commit 8d4880db378350f8ed8969feea13bdc164564fc1.
There are multiple small issues with the series. In the interest
of unblocking the merge window let's opt for a revert.
Link: https://lore.kernel.org/cover.1742557254.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"A small set of core changes for the interrupt subsystem:
- Expose the MSI message in the existing debug filesystem dump.
That's useful for validation and debugging.
- Small cleanups"
* tag 'irq-core-2025-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq: Make a few functions static
irqdomain: Remove extern from function declarations
genirq/msi: Expose MSI message data in debugfs
|
|
Some MACs require the PHY receive clock to be running to complete setup
actions. This may fail if the PHY has negotiated EEE, the MAC supports
receive clock stop, and the link has entered LPI state. Provide a pair
of APIs that MAC drivers can use to temporarily block the PHY disabling
the receive clock.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tvO6k-008Vjt-MZ@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When the system is suspended, the PHY may be placed in low-power mode
by setting the BMCR 0.11 Power down bit. IEEE 802.3 states that the
behaviour of the PHY in this state is implementation specific, and
the PHY is not required to meet the RX_CLK and TX_CLK requirements.
Essentially, this means that a PHY may stop the clocks that it is
generating while in power down state.
However, MACs exist which require the clocks from the PHY to be running
in order to properly resume. phylink_prepare_resume() provides them
with a way to clear the Power down bit early.
Note, however, that IEEE 802.3 gives PHYs up to 500ms grace before the
transmit and receive clocks meet the requirements after clearing the
power down bit.
Add a resume preparation function, which will ensure that the receive
clock from the PHY is appropriately configured while resuming.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tvO6V-008Vjb-AP@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This adds pasid_at|de]tach_ioas ops for attaching hwpt to pasid of a
device and the helpers for it. For now, only vfio-pci supports pasid
attach/detach.
Link: https://patch.msgid.link/r/20250321180143.8468-3-yi.l.liu@intel.com
Signed-off-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
There is no helpers for user to check if a given ID is allocated or not,
neither a helper to loop all the allocated IDs in an IDA and do something
for cleanup. With the two needs, a helper to get the lowest allocated ID
of a range and two variants based on it.
Caller can check if a given ID is allocated or not by:
bool ida_exists(struct ida *ida, unsigned int id)
Caller can iterate all allocated IDs by:
int id;
while ((id = ida_find_first(&pasid_ida)) >= 0) {
//anything to do with the allocated ID
ida_free(pasid_ida, pasid);
}
Link: https://patch.msgid.link/r/20250321180143.8468-2-yi.l.liu@intel.com
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
This extends the below APIs to support PASID. Device drivers to manage pasid
attach/replace/detach.
int iommufd_device_attach(struct iommufd_device *idev,
ioasid_t pasid, u32 *pt_id);
int iommufd_device_replace(struct iommufd_device *idev,
ioasid_t pasid, u32 *pt_id);
void iommufd_device_detach(struct iommufd_device *idev,
ioasid_t pasid);
The pasid operations share underlying attach/replace/detach infrastructure
with the device operations, but still have some different implications:
- no reserved region per pasid otherwise SVA architecture is already
broken (CPU address space doesn't count device reserved regions);
- accordingly no sw_msi trick;
Cache coherency enforcement is still applied to pasid operations since
it is about memory accesses post page table walking (no matter the walk
is per RID or per PASID).
Link: https://patch.msgid.link/r/20250321171940.7213-12-yi.l.liu@intel.com
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
There are only two sw_msi implementations in the entire system, thus it's
not very necessary to have an sw_msi pointer.
Instead, check domain->cookie_type to call the two sw_msi implementations
directly from the core code.
Link: https://patch.msgid.link/r/7ded87c871afcbaac665b71354de0a335087bf0f.1742871535.git.nicolinc@nvidia.com
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
When DMA/MSI cookies were made first-class citizens back in commit
46983fcd67ac ("iommu: Pull IOVA cookie management into the core"), there
was no real need to further expose the two different cookie types.
However, now that IOMMUFD wants to add a third type of MSI-mapping
cookie, we do have a nicely compelling reason to properly dismabiguate
things at the domain level beyond just vaguely guessing from the domain
type.
Meanwhile, we also effectively have another "cookie" in the form of the
anonymous union for other user data, which isn't much better in terms of
being vague and unenforced. The fact is that all these cookie types are
mutually exclusive, in the sense that combining them makes zero sense
and/or would be catastrophic (iommu_set_fault_handler() on an SVA
domain, anyone?) - the only combination which *might* be reasonable is
perhaps a fault handler and an MSI cookie, but nobody's doing that at
the moment, so let's rule it out as well for the sake of being clear and
robust. To that end, we pull DMA and MSI cookies apart a little more,
mostly to clear up the ambiguity at domain teardown, then for clarity
(and to save a little space), move them into the union, whose ownership
we can then properly describe and enforce entirely unambiguously.
[nicolinc: rebase on latest tree; use prefix IOMMU_COOKIE_; merge unions
in iommu_domain; add IOMMU_COOKIE_IOMMUFD for iommufd_hwpt]
Link: https://patch.msgid.link/r/1ace9076c95204bbe193ee77499d395f15f44b23.1742871535.git.nicolinc@nvidia.com
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2025-03-18 (ice, idpf)
For ice:
Przemek modifies string declarations to resolve compile issues on gcc 7.5.
Karol adds padding to initial programming of GLTSYN_TIME* registers to
ensure it will occur in the future to prevent hardware issues.
Jesse Brandeburg turns off driver RDMA capability when the corresponding
kernel config is not enabled to aid in preventing resource exhaustion.
Jan adjusts type declaration to properly catch error conditions and
prevent truncation of values. He also adds bounds checking to prevent
overflow in ice_vc_cfg_q_quanta().
Lukasz adds checking and error reporting for invalid values in
ice_vc_cfg_q_bw().
Mateusz adds check for valid size for ice_vc_fdir_parse_raw().
For idpf:
Emil adds check, and handling, on failure to register netdev.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
idpf: check error for register_netdev() on init
ice: fix using untrusted value of pkt_len in ice_vc_fdir_parse_raw()
ice: fix input validation for virtchnl BW
ice: validate queue quanta parameters to prevent OOB access
ice: stop truncating queue ids when checking
virtchnl: make proto and filter action count unsigned
ice: fix reservation of resources for RDMA when disabled
ice: ensure periodic output start time is in the future
ice: health.c: fix compilation on gcc 7.5
====================
Link: https://patch.msgid.link/20250318200511.2958251-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-mergewindow
i2c-host updates for v6.15
Refactoring and cleanups
- octeon, cadence, i801, pasemi, mlxbf, bcm-iproc: general
refactorings
- octeon: remove 10-bit address support
Improvements
- amd-asf: improved error handling
- designware: use guard(mutex)
- amd-asf, designware: update naming to follow latest specs
- cadence: fix cleanup path in probe
- i801: use MMIO and I/O mapping helpers to access registers
- pxa: handle error after clk_prepare_enable
New features
- added i2c_10bit_addr_*_from_msg() and updated multiple drivers
- omap: added multiplexer state handling
- qcom-geni: update frequency configuration
- qup: introduce DMA usage policy
New hardware support
- exynos: add support for Samsung exynos7870
- k1: add support for spacemit k1 (new driver)
- imx: add support for i.mx94 lpi2c
- rk3x: add support for rk3562
Multiplexers
- ltc4306, reg: fix assignment in platform_driver structure
|
|
ENTRY and ENDPROC were deprecated years ago and replaced with
SYM_FUNC_{START,END}. Fix up a few outdated references in the objtool
documentation and comments. Also fix a few typos.
Suggested-by: Brendan Jackman <jackmanb@google.com>
Suggested-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/5eb7e06e1a0e87aaeda8d583ab060e7638a6ea8e.1742852846.git.jpoimboe@kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core x86 updates from Ingo Molnar:
"x86 CPU features support:
- Generate the <asm/cpufeaturemasks.h> header based on build config
(H. Peter Anvin, Xin Li)
- x86 CPUID parsing updates and fixes (Ahmed S. Darwish)
- Introduce the 'setcpuid=' boot parameter (Brendan Jackman)
- Enable modifying CPU bug flags with '{clear,set}puid=' (Brendan
Jackman)
- Utilize CPU-type for CPU matching (Pawan Gupta)
- Warn about unmet CPU feature dependencies (Sohil Mehta)
- Prepare for new Intel Family numbers (Sohil Mehta)
Percpu code:
- Standardize & reorganize the x86 percpu layout and related cleanups
(Brian Gerst)
- Convert the stackprotector canary to a regular percpu variable
(Brian Gerst)
- Add a percpu subsection for cache hot data (Brian Gerst)
- Unify __pcpu_op{1,2}_N() macros to __pcpu_op_N() (Uros Bizjak)
- Construct __percpu_seg_override from __percpu_seg (Uros Bizjak)
MM:
- Add support for broadcast TLB invalidation using AMD's INVLPGB
instruction (Rik van Riel)
- Rework ROX cache to avoid writable copy (Mike Rapoport)
- PAT: restore large ROX pages after fragmentation (Kirill A.
Shutemov, Mike Rapoport)
- Make memremap(MEMREMAP_WB) map memory as encrypted by default
(Kirill A. Shutemov)
- Robustify page table initialization (Kirill A. Shutemov)
- Fix flush_tlb_range() when used for zapping normal PMDs (Jann Horn)
- Clear _PAGE_DIRTY for kernel mappings when we clear _PAGE_RW
(Matthew Wilcox)
KASLR:
- x86/kaslr: Reduce KASLR entropy on most x86 systems, to support PCI
BAR space beyond the 10TiB region (CONFIG_PCI_P2PDMA=y) (Balbir
Singh)
CPU bugs:
- Implement FineIBT-BHI mitigation (Peter Zijlstra)
- speculation: Simplify and make CALL_NOSPEC consistent (Pawan Gupta)
- speculation: Add a conditional CS prefix to CALL_NOSPEC (Pawan
Gupta)
- RFDS: Exclude P-only parts from the RFDS affected list (Pawan
Gupta)
System calls:
- Break up entry/common.c (Brian Gerst)
- Move sysctls into arch/x86 (Joel Granados)
Intel LAM support updates: (Maciej Wieczor-Retman)
- selftests/lam: Move cpu_has_la57() to use cpuinfo flag
- selftests/lam: Skip test if LAM is disabled
- selftests/lam: Test get_user() LAM pointer handling
AMD SMN access updates:
- Add SMN offsets to exclusive region access (Mario Limonciello)
- Add support for debugfs access to SMN registers (Mario Limonciello)
- Have HSMP use SMN through AMD_NODE (Yazen Ghannam)
Power management updates: (Patryk Wlazlyn)
- Allow calling mwait_play_dead with an arbitrary hint
- ACPI/processor_idle: Add FFH state handling
- intel_idle: Provide the default enter_dead() handler
- Eliminate mwait_play_dead_cpuid_hint()
Build system:
- Raise the minimum GCC version to 8.1 (Brian Gerst)
- Raise the minimum LLVM version to 15.0.0 (Nathan Chancellor)
Kconfig: (Arnd Bergmann)
- Add cmpxchg8b support back to Geode CPUs
- Drop 32-bit "bigsmp" machine support
- Rework CONFIG_GENERIC_CPU compiler flags
- Drop configuration options for early 64-bit CPUs
- Remove CONFIG_HIGHMEM64G support
- Drop CONFIG_SWIOTLB for PAE
- Drop support for CONFIG_HIGHPTE
- Document CONFIG_X86_INTEL_MID as 64-bit-only
- Remove old STA2x11 support
- Only allow CONFIG_EISA for 32-bit
Headers:
- Replace __ASSEMBLY__ with __ASSEMBLER__ in UAPI and non-UAPI
headers (Thomas Huth)
Assembly code & machine code patching:
- x86/alternatives: Simplify alternative_call() interface (Josh
Poimboeuf)
- x86/alternatives: Simplify callthunk patching (Peter Zijlstra)
- KVM: VMX: Use named operands in inline asm (Josh Poimboeuf)
- x86/hyperv: Use named operands in inline asm (Josh Poimboeuf)
- x86/traps: Cleanup and robustify decode_bug() (Peter Zijlstra)
- x86/kexec: Merge x86_32 and x86_64 code using macros from
<asm/asm.h> (Uros Bizjak)
- Use named operands in inline asm (Uros Bizjak)
- Improve performance by using asm_inline() for atomic locking
instructions (Uros Bizjak)
Earlyprintk:
- Harden early_serial (Peter Zijlstra)
NMI handler:
- Add an emergency handler in nmi_desc & use it in
nmi_shootdown_cpus() (Waiman Long)
Miscellaneous fixes and cleanups:
- by Ahmed S. Darwish, Andy Shevchenko, Ard Biesheuvel, Artem
Bityutskiy, Borislav Petkov, Brendan Jackman, Brian Gerst, Dan
Carpenter, Dr. David Alan Gilbert, H. Peter Anvin, Ingo Molnar,
Josh Poimboeuf, Kevin Brodsky, Mike Rapoport, Lukas Bulwahn, Maciej
Wieczor-Retman, Max Grobecker, Patryk Wlazlyn, Pawan Gupta, Peter
Zijlstra, Philip Redkin, Qasim Ijaz, Rik van Riel, Thomas Gleixner,
Thorsten Blum, Tom Lendacky, Tony Luck, Uros Bizjak, Vitaly
Kuznetsov, Xin Li, liuye"
* tag 'x86-core-2025-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (211 commits)
zstd: Increase DYNAMIC_BMI2 GCC version cutoff from 4.8 to 11.0 to work around compiler segfault
x86/asm: Make asm export of __ref_stack_chk_guard unconditional
x86/mm: Only do broadcast flush from reclaim if pages were unmapped
perf/x86/intel, x86/cpu: Replace Pentium 4 model checks with VFM ones
perf/x86/intel, x86/cpu: Simplify Intel PMU initialization
x86/headers: Replace __ASSEMBLY__ with __ASSEMBLER__ in non-UAPI headers
x86/headers: Replace __ASSEMBLY__ with __ASSEMBLER__ in UAPI headers
x86/locking/atomic: Improve performance by using asm_inline() for atomic locking instructions
x86/asm: Use asm_inline() instead of asm() in clwb()
x86/asm: Use CLFLUSHOPT and CLWB mnemonics in <asm/special_insns.h>
x86/hweight: Use asm_inline() instead of asm()
x86/hweight: Use ASM_CALL_CONSTRAINT in inline asm()
x86/hweight: Use named operands in inline asm()
x86/stackprotector/64: Only export __ref_stack_chk_guard on CONFIG_SMP
x86/head/64: Avoid Clang < 17 stack protector in startup code
x86/kexec: Merge x86_32 and x86_64 code using macros from <asm/asm.h>
x86/runtime-const: Add the RUNTIME_CONST_PTR assembly macro
x86/cpu/intel: Limit the non-architectural constant_tsc model checks
x86/mm/pat: Replace Intel x86_model checks with VFM ones
x86/cpu/intel: Fix fast string initialization for extended Families
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull performance events updates from Ingo Molnar:
"Core:
- Move perf_event sysctls into kernel/events/ (Joel Granados)
- Use POLLHUP for pinned events in error (Namhyung Kim)
- Avoid the read if the count is already updated (Peter Zijlstra)
- Allow the EPOLLRDNORM flag for poll (Tao Chen)
- locking/percpu-rwsem: Add guard support [ NOTE: this got
(mis-)merged into the perf tree due to related work ] (Peter
Zijlstra)
perf_pmu_unregister() related improvements: (Peter Zijlstra)
- Simplify the perf_event_alloc() error path
- Simplify the perf_pmu_register() error path
- Simplify perf_pmu_register()
- Simplify perf_init_event()
- Simplify perf_event_alloc()
- Merge struct pmu::pmu_disable_count into struct
perf_cpu_pmu_context::pmu_disable_count
- Add this_cpc() helper
- Introduce perf_free_addr_filters()
- Robustify perf_event_free_bpf_prog()
- Simplify the perf_mmap() control flow
- Further simplify perf_mmap()
- Remove retry loop from perf_mmap()
- Lift event->mmap_mutex in perf_mmap()
- Detach 'struct perf_cpu_pmu_context' and 'struct pmu' lifetimes
- Fix perf_mmap() failure path
Uprobes:
- Harden x86 uretprobe syscall trampoline check (Jiri Olsa)
- Remove redundant spinlock in uprobe_deny_signal() (Liao Chang)
- Remove the spinlock within handle_singlestep() (Liao Chang)
x86 Intel PMU enhancements:
- Support PEBS counters snapshotting (Kan Liang)
- Fix intel_pmu_read_event() (Kan Liang)
- Extend per event callchain limit to branch stack (Kan Liang)
- Fix system-wide LBR profiling (Kan Liang)
- Allocate bts_ctx only if necessary (Li RongQing)
- Apply static call for drain_pebs (Peter Zijlstra)
x86 AMD PMU enhancements: (Ravi Bangoria)
- Remove pointless sample period check
- Fix ->config to sample period calculation for OP PMU
- Fix perf_ibs_op.cnt_mask for CurCnt
- Don't allow freq mode event creation through ->config interface
- Add PMU specific minimum period
- Add ->check_period() callback
- Ceil sample_period to min_period
- Add support for OP Load Latency Filtering
- Update DTLB/PageSize decode logic
Hardware breakpoints:
- Return EOPNOTSUPP for unsupported breakpoint type (Saket Kumar
Bhaskar)
Hardlockup detector improvements: (Li Huafei)
- perf_event memory leak
- Warn if watchdog_ev is leaked
Fixes and cleanups:
- Misc fixes and cleanups (Andy Shevchenko, Kan Liang, Peter
Zijlstra, Ravi Bangoria, Thorsten Blum, XieLudan)"
* tag 'perf-core-2025-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (55 commits)
perf: Fix __percpu annotation
perf: Clean up pmu specific data
perf/x86: Remove swap_task_ctx()
perf/x86/lbr: Fix shorter LBRs call stacks for the system-wide mode
perf: Supply task information to sched_task()
perf: attach/detach PMU specific data
locking/percpu-rwsem: Add guard support
perf: Save PMU specific data in task_struct
perf: Extend per event callchain limit to branch stack
perf/ring_buffer: Allow the EPOLLRDNORM flag for poll
perf/core: Use POLLHUP for pinned events in error
perf/core: Use sysfs_emit() instead of scnprintf()
perf/core: Remove optional 'size' arguments from strscpy() calls
perf/x86/intel/bts: Check if bts_ctx is allocated when calling BTS functions
uprobes/x86: Harden uretprobe syscall trampoline check
watchdog/hardlockup/perf: Warn if watchdog_ev is leaked
watchdog/hardlockup/perf: Fix perf_event memory leak
perf/x86: Annotate struct bts_buffer::buf with __counted_by()
perf/core: Clean up perf_try_init_event()
perf/core: Fix perf_mmap() failure path
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"Core & fair scheduler changes:
- Cancel the slice protection of the idle entity (Zihan Zhou)
- Reduce the default slice to avoid tasks getting an extra tick
(Zihan Zhou)
- Force propagating min_slice of cfs_rq when {en,de}queue tasks
(Tianchen Ding)
- Refactor can_migrate_task() to elimate looping (I Hsin Cheng)
- Add unlikey branch hints to several system calls (Colin Ian King)
- Optimize current_clr_polling() on certain architectures (Yujun
Dong)
Deadline scheduler: (Juri Lelli)
- Remove redundant dl_clear_root_domain call
- Move dl_rebuild_rd_accounting to cpuset.h
Uclamp:
- Use the uclamp_is_used() helper instead of open-coding it (Xuewen
Yan)
- Optimize sched_uclamp_used static key enabling (Xuewen Yan)
Scheduler topology support: (Juri Lelli)
- Ignore special tasks when rebuilding domains
- Add wrappers for sched_domains_mutex
- Generalize unique visiting of root domains
- Rebuild root domain accounting after every update
- Remove partition_and_rebuild_sched_domains
- Stop exposing partition_sched_domains_locked
RSEQ: (Michael Jeanson)
- Update kernel fields in lockstep with CONFIG_DEBUG_RSEQ=y
- Fix segfault on registration when rseq_cs is non-zero
- selftests: Add rseq syscall errors test
- selftests: Ensure the rseq ABI TLS is actually 1024 bytes
Membarriers:
- Fix redundant load of membarrier_state (Nysal Jan K.A.)
Scheduler debugging:
- Introduce and use preempt_model_str() (Sebastian Andrzej Siewior)
- Make CONFIG_SCHED_DEBUG unconditional (Ingo Molnar)
Fixes and cleanups:
- Always save/restore x86 TSC sched_clock() on suspend/resume
(Guilherme G. Piccoli)
- Misc fixes and cleanups (Thorsten Blum, Juri Lelli, Sebastian
Andrzej Siewior)"
* tag 'sched-core-2025-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (40 commits)
cpuidle, sched: Use smp_mb__after_atomic() in current_clr_polling()
sched/debug: Remove CONFIG_SCHED_DEBUG
sched/debug: Remove CONFIG_SCHED_DEBUG from self-test config files
sched/debug, Documentation: Remove (most) CONFIG_SCHED_DEBUG references from documentation
sched/debug: Make CONFIG_SCHED_DEBUG functionality unconditional
sched/debug: Make 'const_debug' tunables unconditional __read_mostly
sched/debug: Change SCHED_WARN_ON() to WARN_ON_ONCE()
rseq/selftests: Fix namespace collision with rseq UAPI header
include/{topology,cpuset}: Move dl_rebuild_rd_accounting to cpuset.h
sched/topology: Stop exposing partition_sched_domains_locked
cgroup/cpuset: Remove partition_and_rebuild_sched_domains
sched/topology: Remove redundant dl_clear_root_domain call
sched/deadline: Rebuild root domain accounting after every update
sched/deadline: Generalize unique visiting of root domains
sched/topology: Wrappers for sched_domains_mutex
sched/deadline: Ignore special tasks when rebuilding domains
tracing: Use preempt_model_str()
xtensa: Rely on generic printing of preemption model
x86: Rely on generic printing of preemption model
s390: Rely on generic printing of preemption model
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
"Locking primitives:
- Micro-optimize percpu_{,try_}cmpxchg{64,128}_op() and
{,try_}cmpxchg{64,128} on x86 (Uros Bizjak)
- mutexes: extend debug checks in mutex_lock() (Yunhui Cui)
- Misc cleanups (Uros Bizjak)
Lockdep:
- Fix might_fault() lockdep check of current->mm->mmap_lock (Peter
Zijlstra)
- Don't disable interrupts on RT in disable_irq_nosync_lockdep.*()
(Sebastian Andrzej Siewior)
- Disable KASAN instrumentation of lockdep.c (Waiman Long)
- Add kasan_check_byte() check in lock_acquire() (Waiman Long)
- Misc cleanups (Sebastian Andrzej Siewior)
Rust runtime integration:
- Use Pin for all LockClassKey usages (Mitchell Levy)
- sync: Add accessor for the lock behind a given guard (Alice Ryhl)
- sync: condvar: Add wait_interruptible_freezable() (Alice Ryhl)
- sync: lock: Add an example for Guard:: Lock_ref() (Boqun Feng)
Split-lock detection feature (x86):
- Fix warning mode with disabled mitigation mode (Maksim Davydov)
Locking events:
- Add locking events for rtmutex slow paths (Waiman Long)
- Add locking events for lockdep (Waiman Long)"
* tag 'locking-core-2025-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
lockdep: Remove disable_irq_lockdep()
lockdep: Don't disable interrupts on RT in disable_irq_nosync_lockdep.*()
rust: lockdep: Use Pin for all LockClassKey usages
rust: sync: condvar: Add wait_interruptible_freezable()
rust: sync: lock: Add an example for Guard:: Lock_ref()
rust: sync: Add accessor for the lock behind a given guard
locking/lockdep: Add kasan_check_byte() check in lock_acquire()
locking/lockdep: Disable KASAN instrumentation of lockdep.c
locking/lock_events: Add locking events for lockdep
locking/lock_events: Add locking events for rtmutex slow paths
x86/split_lock: Fix the delayed detection logic
lockdep/mm: Fix might_fault() lockdep check of current->mm->mmap_lock
x86/locking: Remove semicolon from "lock" prefix
locking/mutex: Add MUTEX_WARN_ON() into fast path
x86/locking: Use asm_inline for {,try_}cmpxchg{64,128} emulations
x86/locking: Use ALT_OUTPUT_SP() for percpu_{,try_}cmpxchg{64,128}_op()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux
Pull RCU updates from Boqun Feng:
"Documentation:
- Add broken-timing possibility to stallwarn.rst
- Improve discussion of this_cpu_ptr(), add raw_cpu_ptr()
- Document self-propagating callbacks
- Point call_srcu() to call_rcu() for detailed memory ordering
- Add CONFIG_RCU_LAZY delays to call_rcu() kernel-doc header
- Clarify RCU_LAZY and RCU_LAZY_DEFAULT_OFF help text
- Remove references to old grace-period-wait primitives
srcu:
- Introduce srcu_read_{un,}lock_fast(), which is similar to
srcu_read_{un,}lock_lite(): avoid smp_mb()s in lock and unlock
at the cost of calling synchronize_rcu() in synchronize_srcu()
Moreover, by returning the percpu offset of the counter at
srcu_read_lock_fast() time, srcu_read_unlock_fast() can avoid
extra pointer dereferencing, which makes it faster than
srcu_read_{un,}lock_lite()
srcu_read_{un,}lock_fast() are intended to replace
rcu_read_{un,}lock_trace() if possible
RCU torture:
- Add get_torture_init_jiffies() to return the start time of the test
- Add a test_boost_holdoff module parameter to allow delaying
boosting tests when building rcutorture as built-in
- Add grace period sequence number logging at the beginning and end
of failure/close-call results
- Switch to hexadecimal for the expedited grace period sequence
number in the rcu_exp_grace_period trace point
- Make cur_ops->format_gp_seqs take buffer length
- Move RCU_TORTURE_TEST_{CHK_RDR_STATE,LOG_CPU} to bool
- Complain when invalid SRCU reader_flavor is specified
- Add FORCE_NEED_SRCU_NMI_SAFE Kconfig for testing, which forces SRCU
uses atomics even when percpu ops are NMI safe, and use the Kconfig
for SRCU lockdep testing
Misc:
- Split rcu_report_exp_cpu_mult() mask parameter and use for tracing
- Remove READ_ONCE() for rdp->gpwrap access in __note_gp_changes()
- Fix get_state_synchronize_rcu_full() GP-start detection
- Move RCU Tasks self-tests to core_initcall()
- Print segment lengths in show_rcu_nocb_gp_state()
- Make RCU watch ct_kernel_exit_state() warning
- Flush console log from kernel_power_off()
- rcutorture: Allow a negative value for nfakewriters
- rcu: Update TREE05.boot to test normal synchronize_rcu()
- rcu: Use _full() API to debug synchronize_rcu()
Make RCU handle PREEMPT_LAZY better:
- Fix header guard for rcu_all_qs()
- rcu: Rename PREEMPT_AUTO to PREEMPT_LAZY
- Update __cond_resched comment about RCU quiescent states
- Handle unstable rdp in rcu_read_unlock_strict()
- Handle quiescent states for PREEMPT_RCU=n, PREEMPT_COUNT=y
- osnoise: Provide quiescent states
- Adjust rcutorture with possible PREEMPT_RCU=n && PREEMPT_COUNT=y
combination
- Limit PREEMPT_RCU configurations
- Make rcutorture senario TREE07 and senario TREE10 use
PREEMPT_LAZY=y"
* tag 'rcu-next-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux: (59 commits)
rcutorture: Make scenario TREE07 build CONFIG_PREEMPT_LAZY=y
rcutorture: Make scenario TREE10 build CONFIG_PREEMPT_LAZY=y
rcu: limit PREEMPT_RCU configurations
rcutorture: Update ->extendables check for lazy preemption
rcutorture: Update rcutorture_one_extend_check() for lazy preemption
osnoise: provide quiescent states
rcu: Use _full() API to debug synchronize_rcu()
rcu: Update TREE05.boot to test normal synchronize_rcu()
rcutorture: Allow a negative value for nfakewriters
Flush console log from kernel_power_off()
context_tracking: Make RCU watch ct_kernel_exit_state() warning
rcu/nocb: Print segment lengths in show_rcu_nocb_gp_state()
rcu-tasks: Move RCU Tasks self-tests to core_initcall()
rcu: Fix get_state_synchronize_rcu_full() GP-start detection
torture: Make SRCU lockdep testing use srcu_read_lock_nmisafe()
srcu: Add FORCE_NEED_SRCU_NMI_SAFE Kconfig for testing
rcutorture: Complain when invalid SRCU reader_flavor is specified
rcutorture: Move RCU_TORTURE_TEST_{CHK_RDR_STATE,LOG_CPU} to bool
rcutorture: Make cur_ops->format_gp_seqs take buffer length
rcutorture: Add ftrace-compatible timestamp to GP# failure/close-call output
...
|
|
Pull bitmap updates from Yury Norov:
- cpumask_next_wrap() rework (me)
- GENMASK() simplification (I Hsin)
- rust bindings for cpumasks (Viresh and me)
- scattered cleanups (Andy, Tamir, Vincent, Ignacio and Joel)
* tag 'bitmap-for-6.15' of https://github.com/norov/linux: (22 commits)
cpumask: align text in comment
riscv: fix test_and_{set,clear}_bit ordering documentation
treewide: fix typo 'unsigned __init128' -> 'unsigned __int128'
MAINTAINERS: add rust bindings entry for bitmap API
rust: Add cpumask helpers
uapi: Revert "bitops: avoid integer overflow in GENMASK(_ULL)"
cpumask: drop cpumask_next_wrap_old()
PCI: hv: Switch hv_compose_multi_msi_req_get_cpu() to using cpumask_next_wrap()
scsi: lpfc: rework lpfc_next_{online,present}_cpu()
scsi: lpfc: switch lpfc_irq_rebalance() to using cpumask_next_wrap()
s390: switch stop_machine_yield() to using cpumask_next_wrap()
padata: switch padata_find_next() to using cpumask_next_wrap()
cpumask: use cpumask_next_wrap() where appropriate
cpumask: re-introduce cpumask_next{,_and}_wrap()
cpumask: deprecate cpumask_next_wrap()
powerpc/xmon: simplify xmon_batch_next_cpu()
ibmvnic: simplify ibmvnic_set_queue_affinity()
virtio_net: simplify virtnet_set_affinity()
objpool: rework objpool_pop()
cpumask: add for_each_{possible,online}_cpu_wrap
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext updates from Tejun Heo:
- Add mechanism to count and report internal events. This significantly
improves visibility on subtle corner conditions.
- The default idle CPU selection logic is revamped and improved in
multiple ways including being made topology aware.
- sched_ext was disabling ttwu_queue for simplicity, which can be
costly when hardware topology is more complex. Implement
SCX_OPS_ALLOWED_QUEUED_WAKEUP so that BPF schedulers can selectively
enable ttwu_queue.
- tools/sched_ext updates to improve compatibility among others.
- Other misc updates and fixes.
- sched_ext/for-6.14-fixes were pulled a few times to receive
prerequisite fixes and resolve conflicts.
* tag 'sched_ext-for-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext: (42 commits)
sched_ext: idle: Refactor scx_select_cpu_dfl()
sched_ext: idle: Honor idle flags in the built-in idle selection policy
sched_ext: Skip per-CPU tasks in scx_bpf_reenqueue_local()
sched_ext: Add trace point to track sched_ext core events
sched_ext: Change the event type from u64 to s64
sched_ext: Documentation: add task lifecycle summary
tools/sched_ext: Provide a compatible helper for scx_bpf_events()
selftests/sched_ext: Add NUMA-aware scheduler test
tools/sched_ext: Provide consistent access to scx flags
sched_ext: idle: Fix scx_bpf_pick_any_cpu_node() behavior
sched_ext: idle: Introduce scx_bpf_nr_node_ids()
sched_ext: idle: Introduce node-aware idle cpu kfunc helpers
sched_ext: idle: Per-node idle cpumasks
sched_ext: idle: Introduce SCX_OPS_BUILTIN_IDLE_PER_NODE
sched_ext: idle: Make idle static keys private
sched/topology: Introduce for_each_node_numadist() iterator
mm/numa: Introduce nearest_node_nodemask()
nodemask: numa: reorganize inclusion path
nodemask: add nodes_copy()
tools/sched_ext: Sync with scx repo
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo:
- Add deprecation info messages to cgroup1-only features
- rstat updates including a bug fix and breaking up a critical section
to reduce interrupt latency impact
- Other misc and doc updates
* tag 'cgroup-for-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: rstat: Cleanup flushing functions and locking
cgroup/rstat: avoid disabling irqs for O(num_cpu)
mm: Fix a build breakage in memcontrol-v1.c
blk-cgroup: Simplify policy files registration
cgroup: Update file naming comment
cgroup: Add deprecation message to legacy freezer controller
mm: Add transformation message for per-memcg swappiness
RFC cgroup/cpuset-v1: Add deprecation messages to sched_relax_domain_level
cgroup/cpuset-v1: Add deprecation messages to memory_migrate
cgroup/cpuset-v1: Add deprecation messages to mem_exclusive and mem_hardwall
cgroup: Print message when /proc/cgroups is read on v2-only system
cgroup/blkio: Add deprecation messages to reset_stats
cgroup/cpuset-v1: Add deprecation messages to memory_spread_page and memory_spread_slab
cgroup/cpuset-v1: Add deprecation messages to sched_load_balance and memory_pressure_enabled
cgroup, docs: Be explicit about independence of RT_GROUP_SCHED and non-cpu controllers
cgroup/rstat: Fix forceidle time in cpu.stat
cgroup/misc: Remove unused misc_cg_res_total_usage
cgroup/cpuset: Move procfs cpuset attribute under cgroup-v1.c
cgroup: update comment about dropping cgroup kn refs
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab updates from Vlastimil Babka:
- Move the TINY_RCU kvfree_rcu() implementation from RCU to SLAB
subsystem and cleanup its integration (Vlastimil Babka)
Following the move of the TREE_RCU batching kvfree_rcu()
implementation in 6.14, move also the simpler TINY_RCU variant.
Refactor the #ifdef guards so that the simple implementation is also
used with SLUB_TINY.
Remove the need for RCU to recognize fake callback function pointers
(__is_kvfree_rcu_offset()) when handling call_rcu() by implementing a
callback that calculates the object's address from the embedded
rcu_head address without knowing its offset.
- Improve kmalloc cache randomization in kvmalloc (GONG Ruiqi)
Due to an extra layer of function call, all kvmalloc() allocations
used the same set of random caches. Thanks to moving the kvmalloc()
implementation to slub.c, this is improved and randomization now
works for kvmalloc.
- Various improvements to debugging, testing and other cleanups (Hyesoo
Yu, Lilith Gkini, Uladzislau Rezki, Matthew Wilcox, Kevin Brodsky, Ye
Bin)
* tag 'slab-for-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
slub: Handle freelist cycle in on_freelist()
mm/slab: call kmalloc_noprof() unconditionally in kmalloc_array_noprof()
slab: Mark large folios for debugging purposes
kunit, slub: Add test_kfree_rcu_wq_destroy use case
mm, slab: cleanup slab_bug() parameters
mm: slub: call WARN() when detecting a slab corruption
mm: slub: Print the broken data before restoring them
slab: Achieve better kmalloc caches randomization in kvmalloc
slab: Adjust placement of __kvmalloc_node_noprof
mm/slab: simplify SLAB_* flag handling
slab: don't batch kvfree_rcu() with SLUB_TINY
rcu, slab: use a regular callback function for kvfree_rcu
rcu: remove trace_rcu_kvfree_callback
slab, rcu: move TINY_RCU variant of kvfree_rcu() to SLAB
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull seccomp updates from Kees Cook:
- avoid the lock trip seccomp_filter_release in common case (Mateusz
Guzik)
- remove unused 'sd' argument through-out (Oleg Nesterov)
- selftests/seccomp: Add hard-coded __NR_uretprobe for x86_64
* tag 'seccomp-v6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
seccomp: avoid the lock trip seccomp_filter_release in common case
seccomp: remove the 'sd' argument from __seccomp_filter()
seccomp: remove the 'sd' argument from __secure_computing()
seccomp: fix the __secure_computing() stub for !HAVE_ARCH_SECCOMP_FILTER
seccomp/mips: change syscall_trace_enter() to use secure_computing()
selftests/seccomp: Add hard-coded __NR_uretprobe for x86_64
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
"As usual, it's scattered changes all over. Patches touching things
outside of our traditional areas in the tree have been Acked by
maintainers or were trivial changes:
- loadpin: remove unsupported MODULE_COMPRESS_NONE (Arulpandiyan
Vadivel)
- samples/check-exec: Fix script name (Mickaël Salaün)
- yama: remove needless locking in yama_task_prctl() (Oleg Nesterov)
- lib/string_choices: Sort by function name (R Sundar)
- hardening: Allow default HARDENED_USERCOPY to be set at compile
time (Mel Gorman)
- uaccess: Split out compile-time checks into ucopysize.h
- kbuild: clang: Support building UM with SUBARCH=i386
- x86: Enable i386 FORTIFY_SOURCE on Clang 16+
- ubsan/overflow: Rework integer overflow sanitizer option
- Add missing __nonstring annotations for callers of
memtostr*()/strtomem*()
- Add __must_be_noncstr() and have memtostr*()/strtomem*() check for
it
- Introduce __nonstring_array for silencing future GCC 15 warnings"
* tag 'hardening-v6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (26 commits)
compiler_types: Introduce __nonstring_array
hardening: Enable i386 FORTIFY_SOURCE on Clang 16+
x86/build: Remove -ffreestanding on i386 with GCC
ubsan/overflow: Enable ignorelist parsing and add type filter
ubsan/overflow: Enable pattern exclusions
ubsan/overflow: Rework integer overflow sanitizer option to turn on everything
samples/check-exec: Fix script name
yama: don't abuse rcu_read_lock/get_task_struct in yama_task_prctl()
kbuild: clang: Support building UM with SUBARCH=i386
loadpin: remove MODULE_COMPRESS_NONE as it is no longer supported
lib/string_choices: Rearrange functions in sorted order
string.h: Validate memtostr*()/strtomem*() arguments more carefully
compiler.h: Introduce __must_be_noncstr()
nilfs2: Mark on-disk strings as nonstring
uapi: stddef.h: Introduce __kernel_nonstring
x86/tdx: Mark message.bytes as nonstring
string: kunit: Mark nonstring test strings as __nonstring
scsi: qla2xxx: Mark device strings as nonstring
scsi: mpt3sas: Mark device strings as nonstring
scsi: mpi3mr: Mark device strings as nonstring
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull execve updates from Kees Cook:
- elf: Define and use note name macros (Akihiko Odaki)
- elf: add remaining SHF_ flag macros (Timur Tabi)
- binfmt: Remove loader from linux_binprm struct (Yonatan Goldschmidt)
- binfmt_elf_fdpic: fix variable set but not used warning (sunliming)
* tag 'execve-v6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
binfmt_elf_fdpic: fix variable set but not used warning
elf: add remaining SHF_ flag macros
binfmt: Remove loader from linux_binprm struct
crash: Remove KEXEC_CORE_NOTE_NAME
s390/crash: Use note name macros
crash: Use note name macros
powerpc/crash: Use note name macros
binfmt_elf: Use note name macros
elf: Define note name macros
|
|
Monitors describing complex systems, such as the scheduler, can easily
grow to the point where they are just hard to understand because of the
many possible state transitions.
Often it is possible to break such descriptions into smaller monitors,
sharing some or all events. Enabling those smaller monitors concurrently
is, in fact, testing the system as if we had one single larger monitor.
Splitting models into multiple specification is not only easier to
understand, but gives some more clues when we see errors.
Add the possibility to create container monitors, whose only purpose is
to host other nested monitors. Enabling a container monitor enables all
nested ones, but it's still possible to enable nested monitors
independently.
Add the sched monitor as first container, for now empty.
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Link: https://lore.kernel.org/20250305140406.350227-3-gmonaco@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Add the following tracepoints:
* sched_entry(bool preempt, ip)
Called while entering __schedule
* sched_exit(bool is_switch, ip)
Called while exiting __schedule
* sched_set_state(task, curr_state, state)
Called when a task changes its state (to and from running)
These tracepoints are useful to describe the Linux task model and are
adapted from the patches by Daniel Bristot de Oliveira
(https://bristot.me/linux-task-model/).
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Link: https://lore.kernel.org/20250305140406.350227-2-gmonaco@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Currently network taps unbound to any interface are linked in the
global ptype_all list, affecting the performance in all the network
namespaces.
Add per netns ptypes chains, so that in the mentioned case only
the netns owning the packet socket(s) is affected.
While at that drop the global ptype_all list: no in kernel user
registers a tap on "any" type without specifying either the target
device or the target namespace (and IMHO doing that would not make
any sense).
Note that this adds a conditional in the fast path (to check for
per netns ptype_specific list) and increases the dataset size by
a cacheline (owing the per netns lists).
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumaze@google.com>
Link: https://patch.msgid.link/ae405f98875ee87f8150c460ad162de7e466f8a7.1742494826.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull tasklist_lock optimizations from Christian Brauner:
"According to the performance testbots this brings a 23% performance
increase when creating new processes:
- Reduce tasklist_lock hold time on exit:
- Perform add_device_randomness() without tasklist_lock
- Perform free_pid() calls outside of tasklist_lock
- Drop irq disablement around pidmap_lock
- Add some tasklist_lock asserts
- Call flush_sigqueue() lockless by changing release_task()
- Don't pointlessly clear TIF_SIGPENDING in __exit_signal() ->
clear_tsk_thread_flag()"
* tag 'kernel-6.15-rc1.tasklist_lock' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
pid: drop irq disablement around pidmap_lock
pid: perform free_pid() calls outside of tasklist_lock
pid: sprinkle tasklist_lock asserts
exit: hoist get_pid() in release_task() outside of tasklist_lock
exit: perform add_device_randomness() without tasklist_lock
exit: kill the pointless __exit_signal()->clear_tsk_thread_flag(TIF_SIGPENDING)
exit: change the release_task() paths to call flush_sigqueue() lockless
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs file handling updates from Christian Brauner:
"This contains performance improvements for struct file's new refcount
mechanism and various other performance work:
- The stock kernel transitioning the file to no refs held penalizes
the caller with an extra atomic to block any increments. For cases
where the file is highly likely to be going away this is easily
avoidable.
Add file_ref_put_close() to better handle the common case where
closing a file descriptor also operates on the last reference and
build fput_close_sync() and fput_close() on top of it. This brings
about 1% performance improvement by eliding one atomic in the
common case.
- Predict no error in close() since the vast majority of the time
system call returns 0.
- Reduce the work done in fdget_pos() by predicting that the file was
found and by explicitly comparing the reference count to one and
ignoring the dead zone"
* tag 'vfs-6.15-rc1.file' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs: reduce work in fdget_pos()
fs: use fput_close() in path_openat()
fs: use fput_close() in filp_close()
fs: use fput_close_sync() in close()
file: add fput and file_ref_put routines optimized for use when closing a fd
fs: predict no error in close()
|
